NEET Chemistry Solutions MCQs Set 10

Chemistry Objective Questions and Answers: Solutions

Review structured MCQ sets for NEET Chemistry Solutions. Built according to official NEET guidelines, these downloadable questions support daily revision and core concept reinforcement.

Download Solutions MCQs with Answers

Navigate directly to the 50 objective questions for Solutions using the digital viewer below. Each practice set includes verified answer keys, allowing students to instantly cross-check their work and identify areas requiring further revision.

Use this Solutions question set for NEET Chemistry revision: 25 questions, each followed by the right answer and a clear explanation. It focuses on concentration terms, Raoult's law, ideal and non-ideal solutions, colligative properties and the van't Hoff factor.

Question 1: A solute when distributed between two immiscible phases remains associated in phase II and dissociated in phase I. If \(α\)is the degree of dissociation and \(n\) is the number of molecules associated then :
(a) \(K=\frac{{c}_{I}}{{c}_{\mathrm{II}}}\)
(b) \(K=\frac{{c}_{I}}{\sqrt[n]{{c}_{\mathrm{II}}(1-α)}}\)
(c) \(K=\frac{{c}_{I}}{{c}_{\mathrm{II}}\left(1-α\right)}\)
(d) \(K=\frac{{c}_{I}\left(1-α\right)}{\sqrt[n]{{c}_{\mathrm{II}}}}\)
Show Answer & Explanation

Answer: (d) \(K=\frac{{c}_{I}\left(1-α\right)}{\sqrt[n]{{c}_{\mathrm{II}}}}\)

Explanation:
1. This is the mathematically modified form of distribution law when solute undergoes association in either of the solvent.

Question 2: The van’t Hoff factor \(i\) for a compound which undergoes dissociation in one solvent and association in other solvent is respectively :
(a) Greater than one and greater than one
(b) Less than one and greater than one
(c) Less than one and less than one
(d) Greater than one and less than one
Show Answer & Explanation

Answer: (d) Greater than one and less than one

Explanation:
1. On dissociation, number of particles increases, thus \(i\)> 1 On association, number of particles decreases thus \(i\)< 1.

Question 3: Two liquids X and Y form an ideal solution at 300K,vapour pressure of the solution containing 1 mol of X and 3, mol of Y is 550 mmHg. At the same temperature, if 1 mol of Y is further added to this solution, vapour pressure of the solution increases by 10 mmHg. Vapour pressure (in mmHg)of XandY in their pure states will be, respectively
(a) 200 and 300
(b) 300 and 400
(c) 400 and 600
(d) 500 and 600
Show Answer & Explanation

Answer: (c) 400 and 600

Explanation:
1. \({P}_{T}={P}_{A}^{∘}{X}_{A}+{p}_{B}^{∘}{X}_{B}\)
2. \(550={P}_{A}^{∘}×\frac{1}{4}+ {p}_{B}^{∘}×\frac{3}{4}\)
3. Thus, \({P}_{A}^{∘}+3{p}_{B}^{∘}=2200\) …(i)
4. When, 1 mol of Y is further added to the solution
5. \(560= {P}_{A}^{∘} ×\frac{1}{5}+ {p}_{B}^{∘}×\frac{4}{5}\)
6. Thus, \({P}_{A}^{∘}+4{p}_{B}^{∘}=2800\) …(ii)
7. On subtraction II-I
8. \({p}_{B}^{°}\)=2800-2200
9. \({p}_{B}^{∘}\) = 600
10. Putting the value of \({p}_{B}^{∘}\) in Eq. (i)
11. \({P}_{A}^{∘}+3×600=2200\)
12. \({P}_{A}^{∘}\) = 2200-1800=400.

Question 4: Solubility of deliquescent substances in water is generally :
(a) High
(b) Low
(c) Moderate
(d) Cannot be said
Show Answer & Explanation

Answer: (a) High

Explanation:
1. A deliquescent solid is one which absorbs so much amount of water that it forms a saturated solution of it.

Question 5: The relative lowering of vapour pressure of a dilute aqueous solution containing non-volatile solute is 0.0125. The molality of the solution is about
(a) 0.70
(b) 0.50
(c) 0.90
(d) 0.80
Show Answer & Explanation

Answer: (a) 0.70

Explanation:
1. Relative lowering of vapour pressure = mole fraction of solute
2. (Raoult,s law)
3. \(\frac{P-{P}_{s}}{P}={X}_{2}\)
4. \(\frac{P-{P}_{s}}{P}=\frac{wM}{mW}\)
5. where, w=wt. of solute
6. M=mol. wt. of solvent
7. m= mol. wt. of solute
8. W = wt. of solvent
9. 0.0125=\(\frac{wM}{mW}\)
10. or \(\frac{M}{mW}=\frac{0.0125}{18}=0.00070\)
11. Hence, molality
12. =\(\frac{w}{mW}×1000=0.0007×1000=0.70\)

Question 6: What is the molality of pure water?
(a) 1
(b) 18
(c) 55.5
(d) None of these
Show Answer & Explanation

Answer: (c) 55.5

Explanation:
1. Molality is defined as the number of moles per 1000 g of solvent. Molality of water = \(\frac{1000}{18}\) = 55.5m

Question 7: Which one is correct?
(a) Molality changes with temperature.
(b) Molality does not change with temperature.
(c) Molarity does not change with temperature.
(d) Normality does not change with temperature.
Show Answer & Explanation

Answer: (b) Molality does not change with temperature.

Explanation:
1. In the molarity and normality the volume of the solution is considered while in molality the mass of the solvent is considered. Molarity and normality change with temperature because of expansion of contraction of the liquid with temperature. However, molality does not change with temperature because mass of the solvent does not change with temperature.

Question 8: Volume of 0.6 M NaOH required to neutralise\(30 {cm}^{3}\) of 0.4 M HCl is
(a) 3 : 4
(b) 1 : 2
(c) 1 : 4
(d) 1 : 1
Show Answer & Explanation

Answer: (a) 3 : 4

Explanation:
1. Number of moles of ethyl alcohol = \(\frac{138}{46}\)= 3
2. Number of moles of water =\(\frac{72}{18}\) =4
3. \({X}_{{C}_{2}{H}_{5}OH}=\frac{3}{3+4}=\frac{3}{7}\)
4. \({X}_{{H}_{2}O}=\frac{4}{3+4}=\frac{4}{7}\)
5. \(\frac{{X}_{{C}_{2}{H}_{5}OH}}{{X}_{{H}_{2}O}}=\frac{\frac{3}{7}}{\frac{4}{7}}\) = \(\frac{3}{4}\)

Question 9: Which is a colligativeproperty ?
(a) Osmotic pressure
(b) Free energy
(c) Heat of vaporisation
(d) Change in pressure
Show Answer & Explanation

Answer: (a) Osmotic pressure

Explanation:
1. Osmotic pressure is a colligative property.

Question 10: Calculate the molal depression constant of a solvent which has freezing point \(16.6℃\) and latent heat of fusion 180.75 \(J{g}^{-1}\).
(a) 2.68
(b) 3.86
(c) 4.68
(d) 2.86
Show Answer & Explanation

Answer: (b) 3.86

Explanation:
1. Given,
2. R=8.314 J\({K}^{-1} mo{l}^{-1}\)
3. \({T}_{f}=273+16.6=289.6 K\)
4. \({L}_{f} =180.75 J{g}^{-1}\)
5. \({k}_{f}=?\)
6. \({k}_{f}=\frac{R.{T}_{f}^{2}}{1000×{L}_{f}}\)
7. \(=\frac{8.314×(289.6{)}^{2}}{1000×180.75}\)
8. \({k}_{f}=3.86\)

Question 11: Which method cannot be used to find out the molecular weight of non-volatile solute?
(a) Victor Meyer’s method
(b) Osmotic pressure method
(c) Cryoscopic method
(d) Ebullioscopic method
Show Answer & Explanation

Answer: (a) Victor Meyer’s method

Explanation:
1. Victor Meyer’s method is used for volatile solutes. Rest all are used for non-volatile solute.

Question 12: How much of 0.1 M \({H}_{2}{SO}_{4}\) solution is required to neutralise 50 mL of 0.2 M NaOH solution?
(a) 50 mL
(b) 5.0 mL
(c) 0.50 mL
(d) 100 mL
Show Answer & Explanation

Answer: (a) 50 mL

Explanation:
1. For complete neutralisation,
2. m. wq of \({H}_{2}{SO}_{4}\) = m. eq. of NaOH
3. \(0.1× 2× V= 50 ×0.2× 1\)
4. \((∵0.1M{H}_{2}{SO}_{4}=0.2N{H}_{2}{SO}_{4})\)
5. V = 50mL

Question 13: Abnormal colligative properties are observed only when the dissolved non-volatile solute in a given dilute solution
(a) Is a non-electrolyte
(b) Offers an intense colour
(c) Associates of dissociates
(d) Offers no colour
Show Answer & Explanation

Answer: (c) Associates of dissociates

Explanation:
1. As the colligative properties depend only upon the number of particles of solute, so if the non-volatile solute dissociate or associates in the solution, the value of colligative properties deviates, i.e., abnormal colligative properties are obtained.

Question 14: Two solutions of \(\mathrm{KN}{O}_{3}\) and \(C{H}_{3}\mathrm{COOH}\) are prepared separately. Molarity of both is 0.1 M and osmatic pressures are \({p}_{1}\) and \({p}_{2}\)respectively. The correct relationship between the osmatic pressures is
(a) \({p}_{1}={p}_{2}\)
(b) \({p}_{1}>{p}_{2}\)
(c) \({p}_{2}>{p}_{1}\)
(d) \(\frac{{p}_{1}}{{p}_{1}+{p}_{2}}+\frac{{p}_{2}}{{p}_{1}+{p}_{2}}\)
Show Answer & Explanation

Answer: (b) \({p}_{1}>{p}_{2}\)

Explanation:
1. \(\mathrm{KN}{O}_{3}\) dissociates completely while \(C{H}_{3}\mathrm{COOH}\) dissociates to a small extent hence,\({ p}_{1}>{p}_{2}\)

Question 15: The vapour pressure of water at \(23℃\) is 19.8 mm. 0.1 mole of glucose is dissolved in 178.2 g of water. What is the vapour pressure (in mm) of the resultant solution?
(a) 19.0
(b) 19.602
(c) 19.402
(d) 19.202
Show Answer & Explanation

Answer: (b) 19.602

Explanation:
1. Given \({p}_{s}\) =19.8 mm
2. \({n}_{A}=0.1\)
3. \({n}_{B}=\frac{178.2}{18}=9.9\)
4. According to Raoult’s law
5. \(\frac{{p}_{s}-p}{{p}_{s}}=\frac{{n}_{A}}{{n}_{A}+{n}_{B}}\)
6. \(\frac{19.8-p}{19.8}=\frac{0.1}{9.9+0.1}\)
7. or 198-10 p = 19.8 \(×\)0.1
8. 10 p = 198-1.98
9. 10 p =196.02
10. p = 19.602 mm

Question 16: 0.004 M\(N{a}_{2}S{O}_{4}\) is isotonic with 0.01 M glucose.Degree of dissociation of \(N{a}_{2}S{O}_{4}\) is
(a) 61
(b) 244
(c) 366
(d) 122
Show Answer & Explanation

Answer: (b) 244

Explanation:
1. Benzoic acid dimerises in beneze.
2. Mol. wt. of benzoic acid
3. =78+12+32=122
4. Hence , moleculer weight of benzoic acid in benzene is
5. =122+122=244

Question 17: In cold countries, ethylene glycol is added to water in the radiators of cars during winters. It results in :
(a) Lowering in boiling point
(b) Reducing viscosity
(c) Reducing specific heat
(d) Lowering in freezing point
Show Answer & Explanation

Answer: (d) Lowering in freezing point

Explanation:
1. Addition of glycol lowers the freezing point of water and thus, glycol water mixture is used as antifreeze in radiators of cars.

Question 18: \({K}_{f}\) for water is 1.86 K-kg-\(\mathrm{mo}{l}^{-1}\). If your automobile radiator holds 1.0 kg of water, how many grams of ethylene glycol \(({C}_{2}{H}_{6}{O}_{2})\) must you add to get the freezing point of the solution lowered to \(-2.8°C\)?
(a) 93 g
(b) 39 g
(c) 27 g
(d) 72 g
Show Answer & Explanation

Answer: (a) 93 g

Explanation:
1. \(∆T=\frac{1000 ×{K}_{f} ×w}{m ×W}\)
2. ∴ \(W= \frac{∆T × m × W}{1000 ×{K}_{f}}\)
3. \(=\frac{2.8 ×62×1000}{1000 ×1.86}=93.33 g\)

Question 19: Mole fraction of solute in an aqueous solution which boils at 100.104. \({K}_{b}\) for \({H}_{2}O\) = 0.52 K \(\mathrm{molalit}{y}^{-1}\):
(a) \(3.6 ×{10}^{-3}\)
(b) 0.004
(c) \(5.6 ×{10}^{-3}\)
(d) 0.996
Show Answer & Explanation

Answer: (b) 0.004

Explanation:
1. \(∆T=\frac{{K}_{b} ×1000 ×w ×18}{m ×W ×18}\)
2. ∴ \(0.104=\frac{0.52 ×1000 × n}{N ×18}\)
3. ∴ \(\frac{ n}{N}=3.6 ×{10}^{-3}\)
4. or \(1+\frac{n}{N}=1.0036\)
5. or \(\frac{N}{n + N}=0.996\)
6. ∴ \(\frac{n}{n+N}=0.004\)

Question 20: Beckmann thermometer are used to measure :
(a) Boiling point of the solution
(b) Freezing point of the solution
(c) Any temperature
(d) Elevation in boiling point or depression in freezing point
Show Answer & Explanation

Answer: (d) Elevation in boiling point or depression in freezing point

Explanation:
1. Beckmann thermometer does not read actual b.p. or f.p. of solution but gives their value on its scale. This leads to evaluation of \(∆{T}_{f}\mathrm{or} ∆{T}_{b}\) upto a least count of 0.01\(ͦC.\)

Question 21: What is the molality of ethyl alcohol (mol. wt. = 416) in aqueous solution which freezes at \(- 10 ͦC\)?.\(({K}_{f}\mathrm{for\ water}=1.86 \mathrm{K\ molalit}{y}^{-1})\)
(a) 3.540
(b) 4.567
(c) 5.376
(d) 6.315
Show Answer & Explanation

Answer: (c) 5.376

Explanation:
1. \(∆T={K}_{f} ×m,\)
2. ∴ 10 = 1.86 \(×m;\)
3. or \(m=5.376\)

Question 22: Which of the following concentration units is independent of temperature?
(a) Normality
(b) Molarity
(c) Molality
(d) ppm
Show Answer & Explanation

Answer: (c) Molality

Explanation:
1. Molality depends only upon weights, not on volumes whereas other given concentration terms depend upon the volume of solution. Volume of solution increases with rise in temperature but temperature does not affect the weights, therefore molality is independent of temperature .

Question 23: The vapour pressure of a dilute solution is not influenced by :
(a) Temperature of solution
(b) Melting point of solute
(c) Mole fraction of solute
(d) Degree of dissociation of solute
Show Answer & Explanation

Answer: (b) Melting point of solute

Explanation:
1. Vapour pressure of a solution increases with temperature, decreases with increase in mole fraction of solute and decreases with degree of dissociation of solute.

Question 24: The freezing point depression constant for water is \(-1.86 ͦ{\mathrm{Cm}}^{-1}.\) If 5.00 g \(N{a}_{2}S{O}_{4}\) is dissolved in 45.0 g \({H}_{2}O\), the freezing point is change by \(- 3.82 ͦC,\) Calculate the van’t Hoff factor for \(N{a}_{2}S{O}_{4}\).
(a) 0.381
(b) 2.05
(c) 2.63
(d) 3.11
Show Answer & Explanation

Answer: (c) 2.63

Explanation:
1. \(∆T=\frac{100 ×{K}_{f} ×w}{m.W}×i\)
2. \(∆T=0-\left(-3.82\right)=3.82°C\)
3. \(3.82 =\frac{1000 ×1.86 ×5×i}{142×45}\)
4. \(i=2.63\)

Question 25: A substance will be deliquescent it its vapour pressure is :
(a) Equal to the atmospheric pressure
(b) Equal to that of water vapour in the air
(c) Greater than that of water vapour in the air
(d) Lesser than that of water vapour in the air
Show Answer & Explanation

Answer: (d) Lesser than that of water vapour in the air

Explanation:
1. Higher vapour pressure of \({H}_{2}O\) in atmosphere will derive \({H}_{2}O\) vapours to solute particles.

Practice MCQs for NEET Chemistry Solutions

Chapter MCQs with Answers for NEET Chemistry

Test your conceptual understanding of Solutions with these targeted multiple-choice questions. Designed in alignment with the latest NEET curriculum for NEET Chemistry, these problem sets build accuracy and prepare students for objective exams.

Expert Practice Material for NEET Chemistry

Built using the official NCERT book for NEET, these Chemistry objective sets provide reliable academic guidance. Pair your practice with our recommended NCERT solutions to master optimal problem-solving approaches.

Complete Your Chapter Revision

Wrap up your chapter revision by testing your knowledge against standard question formats. Everything on our platform is provided free of charge.

FAQs

Where can I access latest NEET Chemistry Solutions MCQs Set 10?

You can get most exhaustive NEET Chemistry Solutions MCQs Set 10 for free on StudiesToday.com. These MCQs for NEET Chemistry are updated for the 2026-27 academic session as per NEET examination standards.

Are Assertion-Reasoning and Case-Study MCQs included in the Chemistry NEET material?

Yes, our NEET Chemistry Solutions MCQs Set 10 include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the NEET paper is now competency-based.

How do practicing Chemistry MCQs help in scoring full marks in NEET exams?

By solving our NEET Chemistry Solutions MCQs Set 10, NEET students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Chemistry.

Do you provide answers and explanations for NEET Chemistry Solutions MCQs Set 10?

Yes, Chemistry MCQs for NEET have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused NEET exams.

Can I practice these Chemistry NEET MCQs online?

Yes, you can also access online interactive tests for NEET Chemistry Solutions MCQs Set 10 on StudiesToday.com as they provide instant answers and score to help you track your progress in Chemistry.