Practice MCQs for NEET Chemistry Solutions
Access targeted multiple-choice questions for Solutions designed to align with the latest NEET academic syllabus for NEET Chemistry. These objective practice sets help students evaluate their conceptual understanding and improve exam readiness.
Access Solutions Questions and Solutions
Navigate directly to the 50 objective questions for Solutions using the digital viewer below. Each practice set includes verified answer keys, allowing students to instantly cross-check their work and identify areas requiring further revision.
Practise 25 chapter-wise NEET Chemistry questions on Solutions in this set, each with a worked solution you can open after attempting it. The questions test concentration terms, Raoult's law, ideal and non-ideal solutions, colligative properties and the van't Hoff factor.
(a) \(\frac{P}{5}\)
(b) \(\frac{P}{2}\)
(c) \(\frac{P}{2.5}\)
(d) \(\frac{3P}{4}\)
Show Answer & Explanation
Answer: (a) \(\frac{P}{5}\)
Explanation:
1. Mol wt. ratio of A and B =1:4
2. \(∴\) Mole ratio of A and B, if equal weight of A and B are taken = 4:1
3. \(∴\) Partial pressure of B = \(\frac{1}{\left(1+4\right)}×p\)
4. \(=\frac{p}{5}\)
(a) Egg will swell
(b) Egg will shrink
(c) Egg will remain same
(d) Egg will first shrink and then swell
Show Answer & Explanation
Answer: (b) Egg will shrink
Explanation:
1. When an egg is kept in saturated solution of \(\mathrm{NaCl}\) after removing its hard shell in dil\(\mathrm{HCl}\), its shrinks. This is due to the fact that water comes out of the egg as salt solution is more concentrated than the egg fluid
(a) Endothermic
(b) Exothermic
(c) Neither exothermic nor endothermic
(d) May be exothermic or endothermic
Show Answer & Explanation
Answer: (b) Exothermic
Explanation:
1. Fusion requires heat (\(i.e,\) endothermic), thus freezing is exothermic.
(a) \(4 × {10}^{-4}\)
(b) \(4.0 ×{10}^{-5}\)
(c) \(5.0 ×{10}^{-4}\)
(d) \(4.0 ×{10}^{-6}\)
Show Answer & Explanation
Answer: (a) \(4 × {10}^{-4}\)
Explanation:
1. \({P}_{{N}_{2}}={K}_{H} ×\mathrm{mole-fraction} ({N}_{2})\)
2. mole-fraction
3. \(\left({N}_{2}\right)\frac{1}{{10}^{5}}× 0.8×5 =4×{10}^{-5}\mathrm{mo}{l}^{-1 }\)
4. In 10 mole solubility is \(4×{10}^{-4}.\)
(a) \(-0.372 ͦC\)
(b) \(-0.520 ͦC\)
(c) + 0.372\(ͦC\)
(d) \(-0.570 ͦC\)
Show Answer & Explanation
Answer: (a) \(-0.372 ͦC\)
Explanation:
1. \(∆{T}_{f}=\mathrm{molality} ×{K}_{f}\)
2. \(=\frac{68.5 ×1000}{342 ×1000} ×1.86\)
3. = 0.372
4. \(∴ {T}_{f} =0-0.372= -0.372 ͦC\)
(a) 180
(b) 18.0
(c) 342
(d) 60
Show Answer & Explanation
Answer: (a) 180
Explanation:
1. \(\frac{{P}_{0}-{P}_{s}}{{P}_{0}}=\frac{w/m}{\frac{w}{m}+\frac{1000}{18}} ;\)
2. ∴ 0.00713 = \(\frac{71.5/m}{\frac{71.5}{m}+\frac{1000}{18}} ;\)
3. \(∴ m=180\)
(a) 68 Torr
(b) 140 Torr
(c) 48 Torr
(d) 72 Torr
Show Answer & Explanation
Answer: (d) 72 Torr
Explanation:
1. Mole of X, \({n}_{x}= \frac{3}{3+2}=\frac{3}{5}\)
2. Moles of Y, \({n}_{y}= \frac{2}{3+2}=\frac{2}{5}\)
3. \({P}_{T}={P}_{x}{n}_{x}+{P}_{y}{n}_{y}\)
4. \(=80×\frac{3}{5}+60×\frac{2}{5}\)
5. \(=48+24=72 Torr\)
(a) 0.3 N
(b) 0.2 N
(c) 0.5 N
(d) 0.1 N
Show Answer & Explanation
Answer: (c) 0.5 N
Explanation:
1. \({N}_{1}{V}_{1}+{N}_{2}{V}_{2}={N}_{3}{V}_{3}\)
2. \(0.3×100+0.6×200={N}_{3}×300\)
3. \(0.3+1.2=3{N}_{3}\)
4. \({N}_{3}=0.5\)
(a) 15
(b) 150
(c) 1500
(d) 148
Show Answer & Explanation
Answer: (d) 148
Explanation:
1. \(\frac{{P}_{0}-{P}_{s}}{{P}_{s}}=\frac{w × M}{m ×W}\)
2. \(\frac{10}{(750-10)}=\frac{2 ×78}{m ×78},\)
3. ∴ \(m=148;\)
4. \(m\) comes 150 if formula\(\frac{{{P}_{0}- P}_{s}}{{P}_{0}} ;\frac{w × M}{m ×W}\) is used. But this is only for dilute solutions.
(a) pH ofa buffer solution
(b) Boiling point elevation
(c) Freezing point depression
(d) Vapour pressure lowering
Show Answer & Explanation
Answer: (a) pH ofa buffer solution
Explanation:
1. Colligative properties certain properties of dilute solution containing non-volatile solute do not depend upon the nature of the solute dissolved but depend only upon the number of particles of the solute present, are called colligative properties. Some colligative properties are boiling point elevation, freezing point depression, lowering of vapour pressure,
(a) \({M}_{2}=\left(\frac{{m}_{2}}{π}\right)VRT\)
(b) \({M}_{2}=\left(\frac{{m}_{2}}{V}\right)\frac{RT}{π}\)
(c) \({M}_{2}=\left(\frac{{m}_{2}}{V}\right)πRT\)
(d) \({M}_{2}=\left(\frac{{m}_{2}}{V}\right)\frac{π}{RT}\) (\({m}_{2}\) = mass of solute \(V=\) volume of solution, \(π=\mathrm{osmotic}\) pressure)
Show Answer & Explanation
Answer: (b) \({M}_{2}=\left(\frac{{m}_{2}}{V}\right)\frac{RT}{π}\)
Explanation:
1. \(πV=\frac{{m}_{2}}{{M}_{2}} RT\)
(a) 3.42 g of cane sugar in one litre water and 0.18 g of glucose in one litre water
(b) 3.42 g of cane sugar in one litre water and 0.18 g of glucose in 0.1 litre water
(c) 3.42 g of cane sugar in one litre water and 0.585 g of NaCl in one litre water
(d) 3.42 g of cane sugar in one litre water and 1.17 g of NaCl in one litre water
Show Answer & Explanation
Answer: (b) 3.42 g of cane sugar in one litre water and 0.18 g of glucose in 0.1 litre water
Explanation:
1. For isotonic solutions, \({π}_{1}= {π}_{2}\)(and for non-electrolytes also \({c}_{1}={c}_{2}).\)
(a) 3.42
(b) 1.62
(c) 3.24
(d) 1.71
Show Answer & Explanation
Answer: (b) 1.62
Explanation:
1. \(∆{T}_{f}=i×{k}_{f}×\frac{n}{W}×1000\)
2. 6=2\(×1.86×\frac{n}{1}×1\)
3. \(n=\frac{6}{2×1.86}=1.62\)
(a) Normality
(b) Molality
(c) Molarity
(d) None of these
Show Answer & Explanation
Answer: (b) Molality
Explanation:
1. \(∆{T}_{b} ∝\mathrm{molality.}\)
(a) 0.01 M \(N{a}_{2}S{O}_{4}\)
(b) 0.01 M \(KN{O}_{3}\)
(c) 0.015 M urea
(d) 0.015 M glucose
Show Answer & Explanation
Answer: (a) 0.01 M \(N{a}_{2}S{O}_{4}\)
Explanation:
1. Boiling point
2. =\({T}_{0}\left(solvent\right)+∆{T}_{b}\)(Elevation in b.p.)
3. \(∆{T}_{b}=mi{k}_{b}\)
4. where, m is the molality
5. i.e., the van’t Hoff factor (i)
6. =[1+(y-1)x]
7. \({k}_{b}=molal\)elevation constant.
8. Thus, \(∆{T}_{b} ∝ im\)
9. Assume 100% ionisation
10. (a) \(mi(N{a}_{2}S{O}_{4})=0.01×3=0.03\)
11. (b) \(mi(KN{O}_{3})=0.01×2=0.02\)
12. (c) mi(urea)=0.015
13. (d) mi(glucose)=0.015
(a) Nature of solute
(b) Nature of solvent
(c) Temperature
(d) All of these
Show Answer & Explanation
Answer: (d) All of these
Explanation:
1. These are factors on which solubility depends.
(a) 29.2 mL
(b) 17.5 mL
(c) 175 mL
(d) 145 mL
Show Answer & Explanation
Answer: (a) 29.2 mL
Explanation:
1. \({\mathrm{Cr}}_{2}{O}_{7}^{2-} + 6{\mathrm{Fe}}^{2+}+14{H}^{+} ⟶6F{e}^{3+}+ {\mathrm{2Cr}}^{3+}+ 7{H}_{2}O\) Hence, 1 mol of \({\mathrm{Cr}}_{2}{O}_{7}^{2-}\) = 6 moles of \(F{e}^{2+}\)
2. \(\frac{{M}_{1}{V}_{1}}{1}=\frac{{M}_{2}{V}_{2}}{6}\)
3. \(\frac{0.1{×V}_{1}}{1}=\frac{0.5 × 35}{6}\)
4. \({V}_{1}=\frac{0.5 × 35}{6 × 0.1}\)
5. \({ V}_{1}\) = 29.2 mL
(a) Optical activity
(b) Osmotic pressure
(c) Depression of freezing point
(d) Elevation of boiling point
Show Answer & Explanation
Answer: (a) Optical activity
Explanation:
1. Colligative properties depends only upon the number of solute particles. Since, optical activity depends upon the nature of substance
2. (through which plane polarised light is passed), it is not a colligative property.
(a) 0.1 M
(b) 0 M
(c) 0.4 M
(d) 0.2 M
Show Answer & Explanation
Answer: (a) 0.1 M
Explanation:
1. Molarity = normality \(×\frac{\mathrm{equivalent\ weight}}{\mathrm{molecular\ weight}}\)
2. Given, normality of \(N{a}_{2}{\mathrm{CO}}_{2}\)solution =0.2 N
3. Equivalent weight = M
4. Molecular weight 2 M (\(∵{\mathrm{Na}}_{2}{\mathrm{CO}}_{3}\mathrm{is\ dipositive.}\))
5. \(∴\) Molarity \(= 0.2 × \frac{M}{2M}\)
6. \(=0.1 M\)
(a) 0.1
(b) 0.2
(c) 0.3
(d) 0.4
Show Answer & Explanation
Answer: (a) 0.1
Explanation:
1. Normality of acid=molarity \(×\)basicity
2. \(0.2=M×2\)
3. \(∴M=\frac{0.2}{2}=0.1\)
\(K=\frac{\mathrm{concentration\ of\ solute\ in\ phase\ I}}{\mathrm{concnetration\ of\ solute\ in\ phase\ II}},\)
the numerical Value of constant \(K\) depends upon :
(a) The temperature of the system
(b) The nature of solute distributed
(c) The nature of two immiscible solvents used
(d) All of the above
Show Answer & Explanation
Answer: (d) All of the above
Explanation:
1. These are conditions for the validity of distribution law.
(a) \(\frac{12}{7}\)
(b) \(\frac{24}{7}\)
(c) \(\frac{6}{5}\)
(d) \(\frac{5}{6}\)
Show Answer & Explanation
Answer: (b) \(\frac{24}{7}\)
Explanation:
1. \(πV=nRT\)
2. \(π=\frac{n}{V}RT\)
3. \(π=CRT\)
4. \(\frac{{π}_{1}}{{π}_{2}}=\frac{{C}_{1}R{T}_{1}}{{C}_{2}R{T}_{2}}\)
5. \({π}_{1}=p, {π}_{2}=2atm {C}_{1}=C, {C}_{2}=\frac{C}{2}\)
6. \({T}_{1}\)=600 K, \({ T}_{2}\)= 700 K
7. \(\frac{P}{2}=\frac{2×C×R×600}{C×R×700}\)
8. p=\(\frac{24}{7}\)
(a) More iodine is added
(b) More water is added
(c) More \(C{S}_{2}\) is added
(d) The temperature is changed
Show Answer & Explanation
Answer: (a) More iodine is added
Explanation:
1. For a given amount of solute in two solvents,
2. \(K=\frac{\mathrm{concentration\ of\ solute\ I}}{\mathrm{concentrtionof\ solute\ II}}\)
(\({K}_{f} of water=1.86 kg K mo{l}^{-1}\))
(a) \({C}_{2}{H}_{4}{O}_{2}\)
(b) \({C}_{3}{H}_{6}{O}_{3}\)
(c) \({C}_{4}{H}_{8}{O}_{4}\)
(d) \({C}_{6}{H}_{12}{O}_{6}\)
Show Answer & Explanation
Answer: (d) \({C}_{6}{H}_{12}{O}_{6}\)
Explanation:
1. \({M}_{2}=\frac{{K}_{f}×{w}_{2}×1000}{△{T}_{f}×{w}_{1}}\)
2. \(or {M}_{2}=\frac{1.86×1.8×1000}{0.465×40}\)=180
3. n=\(\frac{180}{\mathrm{emp.formula\ mass}}= \frac{180}{30}=6\)
4. Molecular formula of the compound is \({C}_{6}{H}_{12}{O}_{6}\) .
(a) 1
(b) 2
(c) 3
(d) 4
Show Answer & Explanation
Answer: (b) 2
Explanation:
1. \(∆{T}_{f}=i×{K}_{f} ×\mathrm{molality}\)
2. 0.00732 = \(i×1.86×0.002\)
3. ∴ \(i=1.96=2\)
4. \(∴ \left[\mathrm{Co}{\left(N{H}_{3}\right)}_{5}∙\left(N{O}_{2}\right)\right]\mathrm{Cl}⟶{\left[\mathrm{Co}{\left(N{H}_{3}\right)}_{5}N{O}_{2}\right]}^{+} +C{l}^{-}\)
Multiple Choice Questions (MCQs) for NEET Chemistry Solutions
Chapter MCQs with Answers for NEET Chemistry
Test your conceptual understanding of Solutions with these targeted multiple-choice questions. Designed in alignment with the latest NEET curriculum for NEET Chemistry, these problem sets build accuracy and prepare students for objective exams.
Expert Practice Material for NEET Chemistry
Each question includes structured solution keys mapped directly to standard NEET textbooks, helping students evaluate their reasoning and correct mistakes early in their revision.
Complete Your Chapter Revision
Wrap up your chapter revision by testing your knowledge against standard question formats. Everything on our platform is provided free of charge.
FAQs
You can get most exhaustive NEET Chemistry Solutions MCQs Set 08 for free on StudiesToday.com. These MCQs for NEET Chemistry are updated for the 2026-27 academic session as per NEET examination standards.
Yes, our NEET Chemistry Solutions MCQs Set 08 include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the NEET paper is now competency-based.
By solving our NEET Chemistry Solutions MCQs Set 08, NEET students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Chemistry.
Yes, Chemistry MCQs for NEET have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused NEET exams.
Yes, you can also access online interactive tests for NEET Chemistry Solutions MCQs Set 08 on StudiesToday.com as they provide instant answers and score to help you track your progress in Chemistry.