NEET Chemistry Electrochemistry MCQs Set 29

Chemistry Objective Questions and Answers: Electrochemistry

Review structured MCQ sets for NEET Chemistry Electrochemistry. Built according to official NEET guidelines, these downloadable questions support daily revision and core concept reinforcement.

Download Electrochemistry MCQs with Answers

Navigate directly to the 50 objective questions for Electrochemistry using the digital viewer below. Each practice set includes verified answer keys, allowing students to instantly cross-check their work and identify areas requiring further revision.

Multiple Choice Questions

Question 1: An increase in equivalent conductance of a strong electrolyte with dilution is mainly due to
(a) increase in number of ions
(b) increase in ionic mobility of ions
(c) 100% ionisation of electrolyte at normal dilution
(d) increase in both, i.e., number of ions and ionic mobility of ions
Show Answer & Explanation

Answer: (b) increase in ionic mobility of ions

Explanation:
1. A strong electrolyte is already completely ionised, so the number of ions does not increase on dilution.
2. On dilution the ions are farther apart, interionic attraction falls and ionic mobility increases.

Teacher's Note:
1. Strong electrolyte is fully ionised.
2. Mobility rises on dilution.

Question 2: The equivalent conductance at infinite dilution of Al2(SO4)3 is correctly represented by the following expression, given that λ°Al3+ and λ°SO42- are the equivalent conductances at infinite dilution of the respective ions
(a) 2λ°Al3+ + 3λ°SO42-
(b) (λ°Al3+ + λ°SO42-) x 6
(c) λ°Al3+ + λ°SO42-
(d) (1/3)λ°Al3+ + (1/2)λ°SO42-
Show Answer & Explanation

Answer: (c) λ°Al3+ + λ°SO42-

Explanation:
1. For one equivalent of salt there is one equivalent of each ion.
2. Because the ionic values are already equivalent conductances, the equivalent conductance of the salt is simply their sum.

Teacher's Note:
1. Equivalent values need no stoichiometric factors.
2. One equivalent cation + one equivalent anion.

Question 3: Consider the following relations for emf of an electrochemical cell: (i) EMF of cell = oxidation potential of anode - reduction potential of cathode; (ii) EMF = oxidation potential of anode + reduction potential of cathode; (iii) EMF = reduction potential of anode + reduction potential of cathode; (iv) EMF = oxidation potential of anode - oxidation potential of cathode. Which of the above relations are correct?
(a) (iii) and (iv)
(b) (ii) and (iv)
(c) (i) and (ii)
(d) (iii) and (i)
Show Answer & Explanation

Answer: (b) (ii) and (iv)

Explanation:
1. EMF = Ered(cathode) - Ered(anode) = Ered(cathode) + Eox(anode).
2. Since Ered = -Eox, this also equals Eox(anode) - Eox(cathode). So (ii) and (iv) are correct.

Teacher's Note:
1. Convert between oxidation and reduction potentials by changing sign.
2. Add the anode oxidation and cathode reduction.

Question 4: Given Cu2+ + 2e- → Cu, E° = 0.337 V and Cu2+ + e- → Cu+, E° = 0.153 V, the electrode potential E° for Cu+ + e- → Cu will be
(a) 0.30 V
(b) 0.90 V
(c) 0.38 V
(d) 0.52 V
Show Answer & Explanation

Answer: (d) 0.52 V

Explanation:
1. ΔG° values add: ΔG°(Cu+/Cu) = ΔG°(Cu2+/Cu) - ΔG°(Cu2+/Cu+).
2. So 1 x E° = 2 x 0.337 - 1 x 0.153 = 0.521 V.

Teacher's Note:
1. Add free energies, not potentials.
2. n E° = n1E1 - n2E2.

Question 5: On the basis of the following E° values, the strongest oxidising agent is [Fe(CN)6]4- → [Fe(CN)6]3- + e-, E° = -0.35 V; Fe2+ → Fe3+ + e-, E° = -0.77 V
(a) Fe3+
(b) [Fe(CN)6]4-
(c) Fe2+
(d) [Fe(CN)6]3-
Show Answer & Explanation

Answer: (a) Fe3+

Explanation:
1. The given values are oxidation potentials. The reduction potentials are +0.35 V for [Fe(CN)6]3-/[Fe(CN)6]4- and +0.77 V for Fe3+/Fe2+.
2. The highest reduction potential belongs to Fe3+, which is therefore the strongest oxidising agent.

Teacher's Note:
1. Reverse the sign to get reduction potentials.
2. Highest E°red is the best oxidant.

Question 6: The equilibrium constant of the reaction Cu(s) + 2Ag+(aq) → Cu2+(aq) + 2Ag(s), E° = 0.46 V at 298 K, is
(a) 4.0 x 1010
(b) 2.4 x 1010
(c) 4.0 x 1015
(d) 2.0 x 1010
Show Answer & Explanation

Answer: (c) 4.0 x 1015

Explanation:
1. log K = nE° / 0.059 = 2 x 0.46 / 0.059 = 15.6.
2. K = 1015.6 = 4 x 1015.

Teacher's Note:
1. log K = nE°/0.059 at 298 K.
2. n = 2.

Question 7: The efficiency of a fuel cell is given by
(a) ΔG / ΔS
(b) ΔH / ΔG
(c) ΔG / ΔH
(d) ΔS / ΔG
Show Answer & Explanation

Answer: (c) ΔG / ΔH

Explanation:
1. The useful electrical work obtained is ΔG, while the total energy released is ΔH.
2. So efficiency = ΔG / ΔH.

Teacher's Note:
1. Work output over energy input.
2. Fuel cells reach 60 to 70%.

Question 8: A hypothetical electrochemical cell is A|A+(xM)||B+(yM)|B. The emf measured is +0.20 V. The cell reaction is
(a) A+ + e- → A and B+ + e- → B
(b) A + B+ → A+ + B
(c) the cell reaction cannot be predicted
(d) A+ + B → A + B+
Show Answer & Explanation

Answer: (b) A + B+ → A+ + B

Explanation:
1. In the cell notation the left electrode is the anode (oxidation: A → A+ + e-) and the right electrode is the cathode (B+ + e- → B).
2. A positive emf means the reaction as written is spontaneous: A + B+ → A+ + B.

Teacher's Note:
1. Left is anode, right is cathode.
2. Positive emf means spontaneous.

Question 9: The mass of carbon anode consumed (giving only carbon dioxide) in the production of 270 kg of aluminium metal from bauxite by the Hall process is (atomic mass: Al = 27)
(a) 90 kg
(b) 180 kg
(c) 270 kg
(d) 540 kg
Show Answer & Explanation

Answer: (a) 90 kg

Explanation:
1. At the anode C + 2O2- → CO2 + 4e-, and at the cathode Al3+ + 3e- → Al. Overall 4Al3+ need 12 e-, which consume 3 C.
2. 270 kg Al = 10 kmol, so C consumed = (3/4) x 10 = 7.5 kmol = 90 kg.

Teacher's Note:
1. Balance the electrons.
2. 4 Al per 3 C.

Question 10: The standard e.m.f. of a galvanic cell involving cell reaction with n = 2 is found to be 0.295 V at 25 °C. The equilibrium constant of the reaction would be (F = 96500 C mol-1, R = 8.314 J K-1 mol-1)
(a) 2.0 x 1011
(b) 4.0 x 1012
(c) 1.0 x 102
(d) 1.0 x 1010
Show Answer & Explanation

Answer: (d) 1.0 x 1010

Explanation:
1. log K = nE° / 0.059 = 2 x 0.295 / 0.059 = 10.
2. K = 1010.

Teacher's Note:
1. log K = nE°/0.059.
2. 0.59 / 0.059 = 10.

Question 11: The equivalent conductances of Ba2+ and Cl- ions are 127 and 76 ohm-1 cm2 eq-1 respectively. The equivalent conductance of BaCl2 at infinite dilution is
(a) 203
(b) 279
(c) 101.5
(d) 139.5
Show Answer & Explanation

Answer: (a) 203

Explanation:
1. By Kohlrausch's law, the equivalent conductance at infinite dilution is the sum of the equivalent conductances of the ions.
2. λ°(BaCl2) = 127 + 76 = 203 ohm-1 cm2 eq-1.

Teacher's Note:
1. Equivalent values simply add.
2. No halving is needed for equivalent values.

Question 12: For the disproportionation of copper, 2Cu+ → Cu2+ + Cu, E° is (given E°(Cu2+/Cu) = 0.34 V and E°(Cu2+/Cu+) = 0.15 V)
(a) -0.19 V
(b) 0.38 V
(c) -0.38 V
(d) 0.49 V
Show Answer & Explanation

Answer: (b) 0.38 V

Explanation:
1. E°(Cu+/Cu) = 2(0.34) - 0.15 = 0.53 V.
2. Cu+ is both reduced (cathode, 0.53 V) and oxidised (anode, 0.15 V), so E° = 0.53 - 0.15 = 0.38 V.

Teacher's Note:
1. Find E°(Cu+/Cu) from ΔG values.
2. Cathode minus anode.

Question 13: For the cell reaction Cu2+(C1) + Zn(s) → Zn2+(C2) + Cu(s) of an electrochemical cell, the change in free energy ΔG at a given temperature is a function of
(a) ln (C1 + C2)
(b) ln (C2/C1)
(c) ln (C1)
(d) ln (C2)
Show Answer & Explanation

Answer: (b) ln (C2/C1)

Explanation:
1. ΔG = ΔG° + RT ln Q, and Q = [Zn2+]/[Cu2+] = C2/C1.
2. So ΔG depends on ln (C2/C1).

Teacher's Note:
1. Write the reaction quotient.
2. Q = C2/C1.

Question 14: E° for the cell Zn|Zn2+(aq)||Cu2+(aq)|Cu is 1.10 V at 25 °C. The equilibrium constant for the reaction Zn + Cu2+ → Cu + Zn2+ is of the order of
(a) 10-37
(b) 1037
(c) 10-28
(d) 1018
Show Answer & Explanation

Answer: (b) 1037

Explanation:
1. log K = nE° / 0.059 = 2 x 1.10 / 0.059 = 37.3.
2. So K is of the order of 1037, a very large value since the reaction is spontaneous.

Teacher's Note:
1. log K = nE°/0.059.
2. Positive E° means K > 1.

Question 15: On heating one end of a piece of metal, the other end becomes hot because of
(a) energised electrons moving to the other end
(b) mobility of atoms in the metal
(c) minor perturbation in the energy of atoms
(d) resistance of the metal
Show Answer & Explanation

Answer: (a) energised electrons moving to the other end

Explanation:
1. Metals have free (delocalised) electrons.
2. The electrons at the heated end gain kinetic energy and carry it quickly to the other end.

Teacher's Note:
1. Free electrons carry heat.
2. Metals are good thermal conductors.

Question 16: The standard reduction potentials at 25 °C of Li+|Li, Ba2+|Ba, Na+|Na and Mg2+|Mg are -3.05, -2.90, -2.71 and -2.37 volt respectively. The strongest oxidising agent among these is
(a) Ba2+
(b) Mg2+
(c) Li+
(d) Na+
Show Answer & Explanation

Answer: (b) Mg2+

Explanation:
1. The ion with the highest (least negative) reduction potential is the strongest oxidising agent.
2. Mg2+ (-2.37 V) is higher than the others, so it is the strongest oxidant.

Teacher's Note:
1. Highest E° means best oxidant.
2. Least negative value.

Question 17: On electrolysis of dilute sulphuric acid using platinum electrodes, the product obtained at the anode will be
(a) hydrogen
(b) hydrogen sulphide
(c) sulphur dioxide
(d) oxygen
Show Answer & Explanation

Answer: (d) oxygen

Explanation:
1. At the anode, water is oxidised in preference to sulphate: 2H2O → O2 + 4H+ + 4e-.
2. Hydrogen is liberated at the cathode, so oxygen is the anode product.

Teacher's Note:
1. Oxidation occurs at the anode.
2. Sulphate is not easily oxidised.

Multiple Choice Questions (MCQs) for NEET Chemistry Electrochemistry

Chapter MCQs with Answers for NEET Chemistry

Review structured objective questions for NEET Chemistry Electrochemistry. Built according to official NEET guidelines, these MCQ sets support daily revision and core concept reinforcement.

Expert Practice Material for NEET Chemistry

Cross-reference your completed choices with comprehensive NCERT solutions for NEET Chemistry to ensure absolute clarity across all sub-topics in this chapter.

Complete Your Chapter Revision

Wrap up your chapter revision by testing your knowledge against standard question formats. Everything on our platform is provided free of charge.

FAQs

Where can I access latest NEET Chemistry Electrochemistry MCQs Set 29?

You can get most exhaustive NEET Chemistry Electrochemistry MCQs Set 29 for free on StudiesToday.com. These MCQs for NEET Chemistry are updated for the 2026-27 academic session as per NEET examination standards.

Are Assertion-Reasoning and Case-Study MCQs included in the Chemistry NEET material?

Yes, our NEET Chemistry Electrochemistry MCQs Set 29 include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the NEET paper is now competency-based.

How do practicing Chemistry MCQs help in scoring full marks in NEET exams?

By solving our NEET Chemistry Electrochemistry MCQs Set 29, NEET students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Chemistry.

Do you provide answers and explanations for NEET Chemistry Electrochemistry MCQs Set 29?

Yes, Chemistry MCQs for NEET have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused NEET exams.

Can I practice these Chemistry NEET MCQs online?

Yes, you can also access online interactive tests for NEET Chemistry Electrochemistry MCQs Set 29 on StudiesToday.com as they provide instant answers and score to help you track your progress in Chemistry.