Narendra Awasthi Solutions Physical Chemistry Chapter 3 Gaseous State Part 2

Narendra Awasthi Solutions for JEE Chemistry: Chapter 03 Gaseous State

Review structured textbook solutions for JEE Chemistry Chapter 03 Gaseous State prepared by Narendra Awasthi. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice JEE Chemistry Solutions: Chapter 03 Gaseous State

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

3. Gaseous State - Problems in Chemistry, Level 2 (Questions 12-30) and Level 3

Level 2

Question Level 2, Question 12. Gas molecules each of mass 10-26 kg are taken in a container of volume 1 dm3. The root mean square speed of gas molecules is 1 km sec-1. What is the temperature of gas molecules? (NA = 6 × 1023; R = 8 J/mol·K)
(a) 298 K   (b) 25 K   (c) 250 K   (d) 2500 K

Solution. Answer (from key): (c) 250 K. Molar mass M = mNA = 10-26 × 6 × 1023 = 6 × 10-3 kg/mol. From urms² = 3RT/M: T = Mu²/(3R) = (6 × 10-3 × 106)/(3 × 8) = 250 K.

Teacher's Note: Use urms² = 3RT/M with M in kg/mol and R in J, so units cancel to give kelvin.

Exam Note: Convert molecular mass to molar mass first.

Question Level 2, Question 13. A balloon of diameter 21 meter weight 100 kg. Calculate its pay-load, if it is filled with He at 1.0 atm and 27°C. Density of air is 1.2 kg m-3. (Given: R = 0.082 L atm K-1mol-1)
(a) 4952.42 kg   (b) 4932.42 kg   (c) 493.242 kg   (d) none of these

Solution. Answer (from key): (b) 4932.42 kg. Volume V = (4/3)π(10.5)³ ≈ 4851 m³ (taking π = 22/7) = 4.851 × 106 L. Moles of He = PV/RT = (1 × 4.851 × 106)/(0.082 × 300) ≈ 1.972 × 105 mol, mass = 4 g/mol × that ≈ 788.8 kg. Mass of air displaced = 1.2 × 4851 = 5821.2 kg. Pay-load = mass of displaced air − (mass of He + mass of balloon) = 5821.2 − 788.8 − 100 = 4932.4 kg.

Teacher's Note: Pay-load = mass of air displaced minus mass of helium and the balloon itself (buoyancy balance).

Exam Note: State the buoyancy balance, then convert volume m³ to L.

Question Level 2, Question 14. A given volume of ozonised oxygen (containing 60% oxygen by volume) required 220 sec to effuse which an equal volume of oxygen took 200 sec only under the conditions. If density of O2 is 1.6 g/L then find density of O3.
(a) 1.936 g/L   (b) 2.16 g/L   (c) 3.28 g/L   (d) 2.24 g/L

Solution. Answer (from key): (d). Corrected: the calculation gives 2.44 g/L (about 2.4 g/L), so the printed option value 2.24 appears to be a misprint of 2.44; (d) is the nearest option. Working: time of effusion ∝ √M, so Mmix/32 = (220/200)² = 1.21 and Mmix = 38.72. With 60% O2 and 40% O3 by volume: 0.6 × 32 + 0.4 × M(O3) = 38.72, so M(O3) = 48.8 (≈ 48). At the same conditions density ∝ M, so d(O3) = 1.6 × 48.8/32 = 2.44 g/L.

Teacher's Note: Equal volumes effusing: time ∝ √M, so mixture molar mass fixes ozone content; density scales with molar mass.

Exam Note: Square the time ratio to get the molar mass ratio.

Question Level 2, Question 15. If 250 mL of N2 over water at 30°C and a total pressure of 740 torr is mixed with 300 mL of Ne over water at 25°C and a total pressure of 780 torr, what will be the total pressure if the mixture is in a 500 mL vessel over water at 35°C. (Given: Vapour pressure (Aqueous tension) of H2O at 25°C, 30°C and 35°C are 23.8, 31.8 and 42.2 torr respectively. Assume volume of H2O(l) is negligible in final vessel)
(a) 760 torr   (b) 828.4 torr   (c) 807.6 torr   (d) 870.6 torr

Solution. Answer (from key): (d) 870.6 torr (our working gives ≈ 871 torr). Dry N2 pressure = 740 − 31.8 = 708.2 torr; dry Ne pressure = 780 − 23.8 = 756.2 torr. In the final vessel (500 mL, 308 K) each gas obeys P1V1/T1 = P2V2/T2: P(N2) = 708.2 × (250/500) × (308/303) ≈ 359.9 torr; P(Ne) = 756.2 × (300/500) × (308/298) ≈ 468.9 torr. Total pressure = 359.9 + 468.9 + 42.2 (water vapour at 35°C) ≈ 871 torr ≈ 870.6 torr.

Teacher's Note: Subtract aqueous tension to get dry gas pressures, rescale each gas, then add the new aqueous tension.

Exam Note: Do not forget the water vapour pressure at 35°C.

Question Level 2, Question 16. A bulb of constant volume is attached to a manometer tube open at other end as shown in figure. The manometer is filled with a liquid of density (1/3)rd that of mercury. Initially h was 228 cm. [Figure: a gas bulb joined to a U-tube manometer whose other limb is open to the atmosphere; h is the difference between the liquid levels, the open limb being higher.] Through a small hole in the bulb gas leaked assuming pressure decreases as dP/dt = −kP. If value of h is 114 cm after 14 minutes, what is the value of k (in hour-1)? [Use ln(4/3) = 0.28 and density of Hg = 13.6 g/mL.]
(a) 0.6   (b) 1.2   (c) 2.4   (d) none of these

Solution. Answer (from key): (b) 1.2 h-1. A liquid column of density ρ(Hg)/3 and height h exerts a pressure equal to h/3 cm of Hg. Initially 228/3 = 76 cm Hg, so Pi = 76 + 76 = 152 cm Hg (2 atm). After 14 min: 114/3 = 38 cm Hg, so P = 76 + 38 = 114 cm Hg (1.5 atm). Integrating dP/dt = −kP gives ln(Pi/P) = kt: ln(2/1.5) = ln(4/3) = 0.28 = k × (14/60) h, so k = 0.28 × 60/14 = 1.2 h-1.

Teacher's Note: Gas pressure = atmospheric + liquid column; convert the light liquid to cm Hg before using first-order decay.

Exam Note: Time must be in hours to match k.

Question Level 2, Question 17. A mixture of nitrogen and water vapours is admitted to a flask at 760 torr which contains a sufficient solid drying agent. After long time the pressure reached a steady value of 722 torr. If the experiment is done at 27°C and drying agent increases in weight by 0.9 gm, what is the volume of the flask? Neglect any possible vapour pressure of drying agent and volume occupied by drying agent.
(a) 443.34 L   (b) 246.3 L   (c) 12.315 L   (d) 24.63 L

Solution. Answer (from key): (d) 24.63 L. The drop in pressure is due to removal of water vapour: p(H2O) = 760 − 722 = 38 torr = 38/760 = 0.05 atm. Moles of water absorbed = 0.9/18 = 0.05 mol. V = nRT/P = (0.05 × 0.0821 × 300)/0.05 = 24.63 L.

Teacher's Note: Pressure drop equals the original water vapour partial pressure; apply PV = nRT to the absorbed water.

Exam Note: Convert torr to atm before using R = 0.0821.

Question Level 2, Question 18. At room temperature following reaction goes to completion: 2AB(g) + B2(g) → 2AB2(g). AB2 is solid with negligible vapour pressure below 0°C. At 300 K, the AB in the smaller flask exerts a pressure of 3 atm and the larger flask exerts a pressure of 1 atm at 400 K when they are separated out by a close valve. The gases are mixed by opening the stop cock and after the end of the reaction the flask are cooled to 250 K. [Figure: two flasks of 8.21 L each joined by a closed stopcock; the left contains AB(g), the right contains B2(g).]
(a) 0.156 atm   (b) 0.3125 atm   (c) 0.625 atm   (d) 3.2 atm

Solution. Answer (from key): (c) 0.625 atm. n(AB) = PV/RT = (3 × 8.21)/(0.0821 × 300) = 1.0 mol. n(B2) = (1 × 8.21)/(0.0821 × 400) = 0.25 mol. B2 is limiting: it uses 0.5 mol AB and forms 0.5 mol solid AB2, leaving 0.5 mol AB gas. Total volume = 16.42 L at 250 K: P = nRT/V = (0.5 × 0.0821 × 250)/16.42 = 0.625 atm.

Teacher's Note: Find the limiting reagent from moles in each flask; the solid product exerts no pressure.

Exam Note: Use total volume 16.42 L after the stopcock is opened.

Question Level 2, Question 19. A vessel of uniform cross-section of length 500 cm as shown in figure is divided in two parts by a weightless and frictionless piston, one part contains 5 moles of He(g) and other part 2 moles of H2(g) and 4 mole of O2(g) added at the same temperature and pressure, in which reaction takes place finally vessel cooled to 300 K and 1 atm. What is the length of He compartment? (Assume volume of piston and vol. H2O(l) formed are negligible) [Figure: a horizontal cylinder with a piston; He on the left, H2 and O2 on the right, initial stage.]
(a) 187.5   (b) 300 atm   (c) 312.5 cm   (d) none of these

Solution. Answer (from key): (c) 312.5 cm. 2H2 + O2 → 2H2O(l): 2 mol H2 uses 1 mol O2, leaving 3 mol O2 gas (water is liquid, negligible volume). At the end both sides are at the same T and P, so volume (length) ∝ moles: length of He part = 500 × 5/(5 + 3) = 312.5 cm.

Teacher's Note: Liquid water takes no volume, so only leftover O2 counts; equal T and P make length proportional to moles.

Exam Note: Work out leftover moles after the reaction first.

Question Level 2, Question 20. For a real gas (mol. mass = 60) if density at critical point is 0.80 g/cm3 and its Tc = (4 × 105)/821 K, then van der Waals' constant a (in atm L2 mol-2) is
(a) 0.3375   (b) 3.375   (c) 1.68   (d) 0.025

Solution. Answer (from key): (b) 3.375. Vc = M/ρ = 60/0.80 = 75 cm3/mol = 0.075 L/mol. Since Vc = 3b, b = 0.025 L/mol. Tc = 8a/(27Rb), so a = 27RbTc/8 = 27 × 0.0821 × 0.025 × (4 × 105/821)/8. Here R × Tc = 0.0821 × 4 × 105/821 = 40, so a = 27 × 0.025 × 40/8 = 3.375 atm L2 mol-2.

Teacher's Note: Critical molar volume gives b (Vc = 3b); then Tc = 8a/27Rb gives a.

Exam Note: Quote Vc = 3b and Tc = 8a/27Rb.

Question Level 2, Question 21. The van der Waals' constant 'b' of a gas is 4π × 10-4 L/mol. How near can the centres of the two molecules approach each other? [Use: NA = 6 × 1023]
(a) 10-7 m   (b) 10-10 m   (c) 5 × 10-11 m   (d) 5 × 10-9 m

Solution. Answer (from key): (b) 10-10 m. b = 4 NA × (4/3)πr³. b = 4π × 10-4 L = 4π × 10-7 m³ per mol, so r³ = (4π × 10-7)/(4 × 6 × 1023 × (4/3)π) = 1.25 × 10-31 = 0.125 × 10-30 m³, giving r = 0.5 × 10-10 m. The closest approach of centres is the molecular diameter d = 2r = 10-10 m.

Teacher's Note: b is four times the actual molecular volume per mole; closest centre-to-centre distance is the diameter 2r.

Exam Note: Answer is the diameter, not the radius.

Question Level 2, Question 22. The density of vapour of a substance (X) at 1 atm pressure and 500 K is 0.8 kg/m3. The vapour effuses through a small hole at a rate of 4/5 times slower than oxygen under the same condition. What is the compressibility factor (Z) of the vapour?
(a) 0.974   (b) 1.35   (c) 1.52   (d) 1.22

Solution. Answer (from key): (c) 1.52. Rate ∝ 1/√M: r(X)/r(O2) = √(32/M) = 4/5, so M = 32 × 25/16 = 50 g/mol. Z = PVm/RT = PM/(ρRT) = (1 × 50)/(0.8 × 0.0821 × 500) = 50/32.84 = 1.52 (ρ = 0.8 kg/m³ = 0.8 g/L).

Teacher's Note: Graham's law gives M; then Z = PM/(ρRT) compares real molar volume with ideal.

Exam Note: Convert 0.8 kg/m³ to 0.8 g/L.

Question Level 2, Question 23. Van der Waals' gas equation can be reduced to virial equation and virial equation (in terms of volume) is Z = A + B/Vm + C/Vm2 + ...... where A = first virial coefficient, B = second virial coefficient, C = third virial coefficient. The third virial coefficient of Hg(g) is 625 (cm2/mol)2. What volume is available for movement of 10 moles He(g) atoms present in 50 L vessel?
(a) 49.75 L   (b) 49.25 L   (c) 25 L   (d) 50 L

Solution. Answer (from key): (a) 49.75 L. Expanding the van der Waals equation gives Z = 1 + (b − a/RT)/Vm + b²/Vm² + ..., so the third coefficient C = b². With C = 625, b = 25 cm3/mol = 0.025 L/mol (the printed unit is read as (cm3/mol)²). Volume available for movement = V − nb = 50 − 10 × 0.025 = 49.75 L.

Teacher's Note: Virial form of van der Waals gives C = b²; free volume is V − nb.

Exam Note: Show C = b² and subtract nb from V.

Question Level 2, Question 24. If the slope of 'Z' (compressibility factor) v/s 'P' curve is constant (slope = π/492.6 atm-1) at a particular temperature (300 K) and very high pressure, then calculate the diameter of the molecules. (Given: NA = 6.0 × 1023, R = 0.0821 atm. lit mol-1 K-1)
(a) 7.5 Å   (b) 5 Å   (c) 2.5 Å   (d) 1.25 Å

Solution. Answer (from key): (b) 5 Å. At high pressure Z = 1 + bP/RT, so slope = b/RT = π/492.6. b = π × 0.0821 × 300/492.6 = 0.05π = 0.157 L/mol = 1.57 × 10-4 m3/mol. Using b = 4NA(4/3)πr³: r³ = (1.57 × 10-4)/(4 × 6 × 1023 × 4.19) = 1.5625 × 10-29 m³, r = 2.5 × 10-10 m = 2.5 Å. Diameter = 5 Å.

Teacher's Note: High-pressure slope of Z against P equals b/RT; then relate b to molecular radius.

Exam Note: Report diameter 2r, not radius.

Question Level 2, Question 25. A graph is plotted between P (atm) vs t°C for 10 mol of an ideal gas as follows: [Figure: a straight line on P (atm) against t°C, starting from the P-axis at the value 27.3 atm and rising to the right.] then slope of curve and volume of container (L) respectively is:
(a) 0.1, 8.21   (b) 8.21, 0.1   (c) 27.3, 8.21   (d) 8.21, 27.3

Solution. Answer: (a) 0.1, 8.21. Corrected: the answer key prints (b), but option (b) would give slope 8.21 and volume 0.1 L, which is inconsistent with the graph. Working: at constant volume P = nR(t + 273)/V, so P = (nR/V)t + 273nR/V. Intercept at t = 0 is 27.3 atm = 273 × 10 × 0.0821/V, so V = 10 × 0.0821 × 273/27.3 = 8.21 L. Slope = nR/V = (10 × 0.0821)/8.21 = 0.1 atm/°C.

Teacher's Note: Straight line P = (nR/V)t + intercept; intercept at 0°C gives V, slope is nR/V.

Exam Note: Slope first, then volume from the intercept.

Question Level 2, Question 26. For two samples A and B of ideal gas following curve is plotted between n vs V (volume of container) at 16.42 atm pressure as follows, then temperature of A and B respectively are: [Figure: two straight lines through the origin on an n against V(l) graph, making angles of 30° and 60° with the V-axis; the printed solution assigns the 30° line to A and the 60° line to B.]
(a) 200/√3 K, 200√3 K   (b) 200/√3 °C, (200√3) °C   (c) 200√3 K, 200/√3 K   (d) √3/200 K, 200/√3 K

Solution. Answer (c). n = (P/RT)V, so slope of the line = P/RT = tan θ, giving T = P/(R tan θ) = 16.42/(0.0821 tan θ) = 200/tan θ. For A (θ = 30°): T = 200√3 K. For B (θ = 60°): T = 200/√3 K.

Teacher's Note: Slope of n against V is P/RT, so a smaller slope means a higher temperature.

Exam Note: T = P/(R·tanθ); keep answers in kelvin.

Question Level 2, Question 27. At a constant pressure, what should be the percentage increase in the temperature in kelvin for a 10% increase in volume:
(a) 10%   (b) 20%   (c) 5%   (d) 50%

Solution. Answer (from key): (a) 10%. At constant P and n, V ∝ T (Charles' law), so a 10% rise in V needs the same 10% rise in the absolute temperature.

Teacher's Note: Charles' law: V is proportional to absolute temperature, so percentage changes are equal.

Exam Note: Use kelvin, not Celsius.

Question Level 2, Question 28. 6 litre H2O is placed in a closed room of volume 827 L at the temperature of 300 K. If vapour pressure of liquid water is 22.8 mm of Hg at 300 K and its density is 1 g/mL: [Given: R = 0.0821 atm. L mol-1 K-1, Assuming volume of liquid water to be constant]
Column-IColumn-II
(P) Mass of H2O in gaseous form (in gm)(1) 6
(Q) Moles of H2O in gaseous state (in moles)(2) 18
(R) Approximate mass of water left in liquid state (in kg)(3) 3
(S) Total number of moles of all atoms in vapour form(4) 1
Codes (P, Q, R, S): (a) 1 2 4 3   (b) 4 3 2 1   (c) 2 3 1 4   (d) 1 2 3 4

Solution. Answer (from key): (c). Corrected: our working gives P→2, Q→4, R→1, S→3. This matches option (c) for P and R, but (c) as printed lists Q→3 and S→4 (swapped); no option matches exactly, so (c) is the closest. Working: free volume = 827 − 6 = 821 L; p = 22.8/760 = 0.03 atm; n = PV/RT = (0.03 × 821)/(0.0821 × 300) = 1.0 mol. (P) mass = 1 × 18 = 18 g → (2). (Q) 1 mol → (4). (R) liquid left = 6000 − 18 ≈ 5.98 kg ≈ 6 kg → (1). (S) each H2O has 3 atoms, so 3 mol of atoms → (3).

Teacher's Note: Vapour exists only up to its vapour pressure; the leftover liquid is nearly all the water.

Exam Note: Check which match is Q and which S.

Question Level 2, Question 29. Match the items of columns I and II.
Column-IColumn-II
(P) Z for ideal gas behaviour(1) 3/8
(Q) Z for real gas at low pressure(2) (1 + Pb/RT)
(R) Z for real gas at high pressure(3) 1
(S) Z for critical state(4) (1 − a/RTV)
Codes (P, Q, R, S): (a) 1 2 4 3   (b) 4 3 2 1   (c) 2 1 4 3   (d) 1 2 3 4

Solution. Answer (from key): (b). Corrected: our working gives P→3, Q→4, R→2, S→1. Option (b) (4 3 2 1) agrees for R and S but has P and Q interchanged; no option matches exactly, so (b) is the closest. Working: ideal gas Z = 1 → (3); real gas at low pressure Z = 1 − a/RTV → (4); at high pressure Z = 1 + Pb/RT → (2); at the critical point Zc = PcVc/RTc = (a/27b²)(3b)/(R × 8a/27Rb) = 3/8 → (1).

Teacher's Note: Low pressure: attraction term dominates (Z below 1); high pressure: size term dominates (Z above 1).

Exam Note: Zc = 3/8 follows from critical constants.

Question Level 2, Question 30. Match List-I (conditions for real gas) with List-II.
List-IList-II
(P) If force of attraction among gas particles are negligible(1) PVm = RT
(Q) At 1 atm and 273 K(2) PVm = RT − a/Vm
(R) If the volume of gas particles is negligible(3) (P + a/Vm²)(Vm − b) = RT
(S) At low pressure and high temperature(4) PVm = RT + Pb
Codes (P, Q, R, S): (a) 4 1 3 2   (b) 4 3 2 1   (c) 2 1 4 3   (d) 1 2 3 4

Solution. Answer (from key): (b). P→4: with no attraction (a = 0) the van der Waals equation gives PVm = RT + Pb. Q→3: at 1 atm and 273 K the gas is real and obeys the full van der Waals equation. R→2: with b = 0, PVm = RT − a/Vm. S→1: at low pressure and high temperature the gas is ideal, PVm = RT.

Teacher's Note: Switch off a for repulsion-only, switch off b for attraction-only; low P, high T is ideal.

Exam Note: Set a = 0 or b = 0 to match.

Level 3: Passage 1

Passage 1: van der Waals equation (P + an²/V²)(V − nb) = nRT, where Pideal = Preal + an²/V² (corrected pressure) and V − nb is the corrected volume; constant a measures intermolecular attraction and nb is the volume occupied by the molecules.

Question Level 3, Passage 1, Question 1. At relatively high pressures, the van der Waals' equation of state reduces to
(a) PV = RT − a/V   (b) PV = aRT/V²   (c) P = RT − a/V²   (d) PV = RT + Pb

Solution. Answer (from key): (d). At high pressure V is small, so the a/V² term is negligible compared with P, and (V − b) = RT/P, which gives PV = RT + Pb.

Teacher's Note: At high pressure the pressure-correction term is small relative to P, leaving only the volume correction b.

Exam Note: State PV = RT + Pb and that the a-term drops out.

Question Level 3, Passage 1, Question 2. For non-zero value of force of attraction between gas molecules for large volume, gas equation will be:
(a) PV = nRT − n²a/V   (b) PV = nRT + nbP   (c) P = nRT/(V − b)   (d) PV = nRT

Solution. Answer (from key): (a). For large V the nb correction is negligible against V, so (P + an²/V²)V = nRT, i.e. PV = nRT − n²a/V.

Teacher's Note: Large volume makes b negligible, but the attraction term a stays, lowering PV below nRT.

Exam Note: Neglect b, keep a.

Question Level 3, Passage 1, Question 3. The van der Waals' constant 'a' for CO2 gas is greater than that of H2 gas. Its mean that the
(a) strength of van der Waals' force of CO2 gas is greater than that of H2 gas
(b) strength of van der Waals' force of CO2 gas is less than that of H2 gas
(c) strength of van der Waals' force of CO2 gas is equal to that of H2 gas
(c) CO2 gas can be more easily liquefied
(d) H2 gas can be more easily liquefied

Solution. Answer (from key): (c), i.e. CO2 gas can be more easily liquefied. A larger a means stronger intermolecular attraction, so CO2 is more easily liquefied (higher critical temperature). The options are printed in the book with the label (c) used twice; the key letter (c) refers to the statement about easier liquefaction. Statement (a) is also true of the force strength itself.

Teacher's Note: Larger a means stronger attraction, hence easier liquefaction and higher critical temperature.

Exam Note: Link a to ease of liquefaction.

Question Level 3, Passage 1, Question 4. Using van der Waals equation, find the constant 'a' (in atm L2 mol-2) when two moles of a gas confined in 4 L flask exerts a pressure of 11.0 atmospheres at a temperature of 300 K. The value of b is 0.05 L mol-1. (R = 0.082 atm. L/K mol)
(a) 2.62   (b) 2.64   (c) 6.24   (d) 6.46

Solution. Answer (from key): (d) 6.46. (P + an²/V²)(V − nb) = nRT: (11 + 4a/16)(4 − 0.10) = 2 × 0.082 × 300 = 49.2. So 11 + a/4 = 49.2/3.9 = 12.615, a/4 = 1.615, a = 6.46 atm L2 mol-2.

Teacher's Note: Substitute n, V, b into the van der Waals equation and solve the linear equation for a.

Exam Note: Use (V − nb) = 3.9 L, not 4 L.

Level 3: Passage 2

Passage 2: collision cross-section is the area πσ² around a molecule; the number of collisions made by one molecule per unit time is Z1 = √2 πσ² ū N* (N* = molecules per unit volume); bimolecular collisions per unit volume per unit time Z11 = (1/√2) πσ² ū N*²; the mean free path is λ = ū/Z1 = 1/(√2 πσ² N*).

Question Level 3, Passage 2, Question 1. For a given gas the mean free path at a particular pressure is
(a) Independent of temperature   (b) Decreases with rise in temperature   (c) Increases with rise in temperature   (d) Directly proportional to T²

Solution. Answer (from key): (c). λ = 1/(√2 πσ²N*) and N* = P/kT, so λ = kT/(√2 πσ²P). At fixed pressure λ is directly proportional to T, so it increases with temperature.

Teacher's Note: Mean free path is kT/(√2πσ²P): proportional to T at constant pressure.

Exam Note: Write λ = kT/(√2πσ²P).

Question Level 3, Passage 2, Question 2. Three ideal gas samples in separate equal volume containers are taken and following data is given:
PressureTemperatureMean free pathsMol. wt.
Gas A1 atm1600 K0.16 nm20
Gas B2 atm200 K0.16 nm40
Gas C4 atm400 K0.04 nm80
Calculate ratio of collision frequencies (Z11) (A : B : C) of following for the three gases.
(a) 1 : 2 : 4   (b) 4 : 2 : 1   (c) 1 : 4 : 16   (d) 16 : 4 : 1

Solution. Answer (from key): (c). From λ = kT/(√2πσ²P), σ² ∝ T/(λP). Let c = 1/(0.16) etc.: σ² ∝ 1600/(0.16 × 1) : 200/(0.16 × 2) : 400/(0.04 × 4) = 10000 : 625 : 2500, i.e. σA : σB : σC = 4 : 1 : 2. Z11 ∝ σ²ūN*² ∝ σ²√(T/M) (P/T)² = σ²P²/(√M · T3/2). Hence A : B : C = (16 × 1)/(√20 × 16003/2) : (1 × 4)/(√40 × 2003/2) : (4 × 16)/(√80 × 4003/2) = 1 : 4 : 16 (checked numerically).

Teacher's Note: Get collision diameters from λ, then Z11 ∝ σ²P²/(√M·T3/2) since ū ∝ √(T/M), N* ∝ P/T.

Exam Note: Derive σ ratio first, then Z11 ratio.

Question Level 3, Passage 2, Question 3. For the same three gases (data in Question 2), calculate number of collision by one molecule per sec (Z1).
(a) 4 : 1 : 4   (b) 1 : 4 : 4   (c) 4 : 3 : 2   (d) 1 : 2 : 4

Solution. Answer (from key): (a). Z1 = √2πσ²ūN* ∝ σ²√(T/M)(P/T) = σ²P/√(MT). With σ² = 10000 : 625 : 2500 (from Question 2): A : B : C = (10000 × 1)/√(20 × 1600) : (625 × 2)/√(40 × 200) : (2500 × 4)/√(80 × 400) = 55.9 : 13.98 : 55.9 = 4 : 1 : 4 (checked numerically).

Teacher's Note: Z1 ∝ σ²P/√(MT); reuse the collision-diameter ratio from the previous question.

Exam Note: Use Z1, not Z11, formula.

Level 3: Passage 3

Passage 3: a manometer containing a liquid of density 5.44 g/cm³ is attached to a flask containing gas A; the other limb is open to the atmosphere (Patm = 1 atm) and the liquid level in the open limb is 38 cm higher than in the limb joined to the flask.

Question Level 3, Passage 3, Question 1. If the same liquid is used in Barometer to measure the atmospheric pressure, then what will be the length of the liquid column, which exerts pressure equal to 1 atm ? (density of Hg = 13.6 g/cm3)
(a) 190 cm   (b) 76 cm   (c) 30.4 cm   (d) 266 cm

Solution. Answer (from key): (a). hLdL = hHgdHg: hL = 76 × 13.6/5.44 = 190 cm.

Teacher's Note: Equal pressure means h × density is the same, so a lighter liquid needs a taller column.

Exam Note: Use h1d1 = h2d2 with 76 cm Hg = 1 atm.

Question Level 3, Passage 3, Question 2. The initial pressure of gas A in the flask is:
(a) 1.5 atm   (b) 1 atm   (c) 1.3 atm   (d) 1.2 atm

Solution. Answer (from key): (d) 1.2 atm. Pgas = Patm + Pliquid column = 1 + 38/190 = 1.2 atm.

Teacher's Note: Gas side is at higher pressure by the 38 cm column, which equals 38/190 atm.

Exam Note: Convert the 38 cm column into atm first.

Question Level 3, Passage 3, Question 3. If gas A undergoes 30% trimerisation [3A(g) ⇌ A3(g)] then the difference in height of the liquid level in two columns is:
(a) 38 cm   (b) 7.6 cm   (c) 3.04 cm   (d) 15.1 cm

Solution. Answer (from key): (b) 7.6 cm. Initial pressure 1.2 atm. 30% of A trimerises: 0.36 atm of A is used, forming 0.36/3 = 0.12 atm of A3. Final P = 1.2 − 0.36 + 0.12 = 0.96 atm. Pressure difference from atmosphere = 1 − 0.96 = 0.04 atm, so height difference = 0.04 × 190 = 7.6 cm.

Teacher's Note: Three moles of A give one of A3, so total pressure falls by two-thirds of the reacted pressure.

Exam Note: Net pressure change is 0.24 atm, not 0.36.

Level 3: One or More Answers Is/Are Correct

Question Level 3, One or more correct, Question 1. Which of the following curves represent(s) Boyle's law? [Figure: four graphs: (a) P against V, a falling hyperbola; (b) 1/P against V, a straight line through the origin; (c) PV against V, a horizontal line; (d) P against 1/V, a straight line through the origin.]

Solution. Answer (from key): (a, b, c, d). Boyle's law: PV = constant at constant T and n. Then P ∝ 1/V (hyperbola in P-V), 1/P ∝ V (straight line), PV against V is a horizontal line, and P against 1/V is a straight line. All four are correct.

Teacher's Note: PV constant gives hyperbola in P-V and straight lines when plotted as 1/P-V or P-1/V.

Exam Note: Say PV = constant and test each graph.

Question Level 3, One or more correct, Question 2. If a gas expands at constant temperature:
(a) the pressure decreases
(b) the kinetic energy of the molecules remains the same
(c) the K.E. of the molecules decrease
(d) the number of molecules of the gas increase

Solution. Answer (from key): (a, b). At constant T the average kinetic energy is unchanged (it depends only on T), and by Boyle's law the pressure falls as volume rises. The number of molecules does not change.

Teacher's Note: Average KE depends only on temperature; expansion at fixed T lowers pressure but not KE or moles.

Exam Note: Link KE to T only.

Question Level 3, One or more correct, Question 3. Which of the following statements are correct?
(a) It is not possible to compress a gas at a temperature below TC
(b) At a temperature below TC, the molecules are close enough for the attractive forces to act, and condensation occurs
(c) No condensation takes place above TC
(d) Due to higher kinetic energy of the gas molecules above TC, it is considered as super critical fluid.

Solution. Answer (from key): (b, c, d). Below Tc a gas can be compressed and liquefied, because attractions act when molecules are close, so (a) is false. Above Tc the kinetic energy overcomes attractions, no liquid forms and the substance is a supercritical fluid, so (b), (c), (d) are true.

Teacher's Note: Below Tc compression liquefies a gas; above Tc no pressure can liquefy it.

Exam Note: Define Tc as the highest liquefaction temperature.

Question Level 3, One or more correct, Question 4. What conclusion would you draw from the following graphs for an ideal gas? [Figure: two straight lines, P against T and V against T, each cutting the temperature axis at 0 K (−273.15°C).]
(a) As the temperature is reduced, the volume as well as the pressure increase
(b) As the temperature is reduced, the volume becomes zero and the pressure reaches infinity
(c) As the temperature is reduced, the pressure decrease
(d) A point is reached where, theoretically, the volume become zero

Solution. Answer (from key): (c, d). Both graphs are straight lines with positive slope, so lowering T lowers both P and V. Extrapolated V reaches zero at 0 K (theoretically), so (c) and (d) are correct; (a) and (b) are false.

Teacher's Note: Rising lines mean P and V fall as T falls; V extrapolates to zero at 0 K.

Exam Note: Read slope direction before judging statements.

Question Level 3, One or more correct, Question 5. At Boyle temperature:
(a) the effects of repulsive and attractive intermolecular forces just offset each other
(b) the repulsive intermolecular forces are greater than the attractive intermolecular forces
(c) the repulsive intermolecular forces are less than the attractive intermolecular forces
(d) b − a/RT > 0

Solution. Answer (from key): (a). At the Boyle temperature TB = a/Rb the two effects cancel, so b − a/RT = 0 and the gas behaves ideally over a range of low pressure. Hence only (a) is correct.

Teacher's Note: At TB the size effect b equals the attraction effect a/RT, so Z ≈ 1 at low pressure.

Exam Note: Quote b − a/RT = 0.

Question Level 3, One or more correct, Question 6. Indicate the correct statement for equal volumes of N2(g) and CO2(g) at 25°C and 1 atm.
(a) The average translational K.E. per molecule is the same for N2 and CO2
(b) The rms speed remains same for both N2and CO2
(c) The density of N2 is less than that of CO2
(d) The total translational K.E. of both N2 and CO2 is the same

Solution. Answer (from key): (a, c, d). Same T gives the same average KE per molecule, (a). rms speed = √(3RT/M) differs because M differs (28 and 44), so (b) is false. Density ∝ M at equal T and P, so N2 is lighter, (c). Equal volumes at the same T and P contain equal moles, so total KE (3/2 nRT) is equal, (d).

Teacher's Note: Average KE depends only on T; speed and density depend on molar mass; equal volumes mean equal moles.

Exam Note: Separate per-molecule KE from speed.

Question Level 3, One or more correct, Question 7. Which of the following is correct for critical temperature?
(a) It is the highest temperature at which liquid and vapour can coexist
(b) Beyond this temperature, there is no distinction between the two phases and a gas cannot be liquefied by compression.
(c) At this temperature, the gas and the liquid phases have different critical densities
(d) All are correct

Solution. Answer (from key): (a, b). (a) and (b) are the definition of critical temperature. At Tc the liquid and gas phases become identical with the same (critical) density, so (c) is false, and hence (d) is false.

Teacher's Note: At the critical point both phases have the same density; above Tc no liquid can form.

Exam Note: State Tc as the highest liquefaction temperature.

Question Level 3, One or more correct, Question 8. Consider the following statement regarding Maxwell's distribution of velocities. The correct statement(s) is/are:
(a) As temperature increases, the peak (maxima) of a curve is shifted towards right side
(b) As temperature increases, the most probable velocity of molecules increases but fraction of molecules of maximum velocity decreases
(c) The area under the curve at all the temperatures is the same because it represents the number of gaseous molecules
(d) The fractions of molecules having different velocities are different at a given temperature

Solution. Answer (from key): (a, b, c, d). Raising T shifts the peak to higher speed (ump ∝ √T) and lowers and flattens it, while the total area stays equal to the total number of molecules. At a given T the fractions at different speeds differ. All four are correct.

Teacher's Note: Higher T: peak moves right and drops, curve widens, area stays constant.

Exam Note: Mention constant area under the curve.

Question Level 3, One or more correct, Question 9. If a gas expands at a constant pressure by providing heat:
(a) the temperature increases
(b) the kinetic energy of the gaseous molecules remains same
(c) the kinetic energy of gaseous molecules decreases
(d) the number of molecules of the gas decreases

Solution. Answer (from key): (a). At constant P, V ∝ T, so expansion on heating means T rises, so the average KE rises. KE does not stay same or decrease, and the number of molecules is unchanged.

Teacher's Note: Heating at constant P raises T (V ∝ T), so average KE rises while moles stay fixed.

Exam Note: Use Charles' law.

Question Level 3, One or more correct, Question 10. Select incorrect statement(s):
(a) the product of pressure and volume of fixed amount of a gas is independent of temperature
(b) the value of universal gas constant depends upon temperature, volume and number of gaseous molecules
(c) the gas constant also know as Boltzmann's constant
(d) the average kinetic energy of molecules depends only on temperature

Solution. Answer (from key): (a, b, c). (a) is incorrect: PV = nRT depends on T. (b) is incorrect: R is a universal constant. (c) is incorrect: Boltzmann's constant is k = R/NA, the gas constant per molecule. (d) is correct, so it is not selected.

Teacher's Note: R is universal; Boltzmann constant k = R/NA; PV for fixed n varies with T.

Exam Note: Select the incorrect ones only.

Question Level 3, One or more correct, Question 11. Following represents the Maxwell distribution curve for an ideal gas at two temperature T1 and T2. Which of the following option(s) are true? [Figure: plot of (1/N)(dN/du) against u with two curves: curve I (T1) is taller and narrower with its peak at umps,1; curve II (T2) is lower and broader with its peak at a larger speed umps,2.]
(a) Total area under the two curves is independent of moles of gas
(b) Umps decreases as temperature decreases
(c) T1 > T2 and hence higher the temperature, sharper the curve
(d) The fraction of molecules having speed = Umps decreases as temperature increases

Solution. Answer (from key): (a, b, d). (a) The area under the curve gives the fraction of molecules and is always 1. (b) umps ∝ √T, so it decreases as T decreases. (c) is false: curve II has the larger umps, so T2 is higher, and a higher temperature gives a broader, flatter curve. (d) is true: the peak height falls as T rises.

Teacher's Note: Area under the normalized curve is 1; higher T gives peak at larger speed, lower and broader.

Exam Note: Identify the hotter curve by its peak position.

Question Level 3, One or more correct, Question 12. Two container each containing liquid water are connected as shown in diagram. [Figure: flasks X (kept at 300 K) and Y (kept at 350 K), each with some liquid water, joined by a tube with a valve.] Given that vapour pressure of H2O(l) at 300 K and 350 K are 22 torr and 40 torr. Select write statement(s):
(a) The final pressure in each container if valve is opened while keeping the containers at the given temperature is 22 torr
(b) The final pressure in each container if valve is opened while keeping the containers at the given temperature is 40 torr
(c) Mass of H2O(l) is decreased in vessel X
(d) Mass of H2O(l) is decreased in vessel Y

Solution. Answer (from key): (a, d). Once the valve is opened the vapour pressure must be the same in both vessels. The cooler vessel X cannot hold vapour above 22 torr, so water vapour from Y condenses in X. Pressure settles at 22 torr (set by the cold liquid), while Y keeps evaporating (its vapour pressure would be 40 torr) and its liquid mass decreases until it is used up; X gains water. So (a) and (d) are correct.

Teacher's Note: Common pressure is limited by the cooler liquid; water distils from the warmer vessel to the cooler.

Exam Note: Link final pressure to the colder vessel.

Question Level 3, One or more correct, Question 13. Select the correct statement(s):
(a) At Boyle's temperature a real gas behaves like an ideal gas at low pressure
(b) Above critical conditions, a real gas behave like an ideal gas
(c) For hydrogen gas 'b' dominates over 'a' at all temperature
(d) At high pressure van der Waals' constant 'b' dominates over 'a'

Solution. Answer (from key): (a, b, d). (a) At TB the attraction and size effects cancel, so the gas is ideal at low pressure. (d) At high pressure Z = 1 + Pb/RT, so b dominates. (b) is accepted by the book (far above critical conditions the gas approaches ideal behaviour). (c) is false because at sufficiently low temperature attractions (a) matter even for hydrogen. This follows the book's key.

Teacher's Note: At high pressure the size term b dominates; at TB effects cancel; hydrogen is not ideal at very low T.

Exam Note: Answer follows the key; state conditions for each claim.

Question Level 3, One or more correct, Question 14. Select the correct statement:
(a) The value of compressibility factor 'Z' for H2 gas is greater than one at room temperature and pressure
(b) The real gas behaves as an ideal gas at Boyle's temperature.
(c) For a real gas following van der Waals' equation of state, the expression of critical temperature is 8a/27R.b
(d) At low pressure, the compressibility factor 'Z' = 1 + P.b/RT for a van der Waals' gas.

Solution. Answer (from key): (a, b, c). (a) H2 has very small a, so repulsion (b) dominates and Z > 1. (b) true at low pressure. (c) Tc = 8a/27Rb is correct. (d) is false: at low pressure Z = 1 − a/RTV; the expression 1 + Pb/RT is for high pressure.

Teacher's Note: Hydrogen has tiny a so Z > 1; low pressure gives 1 − a/RTV, high pressure gives 1 + Pb/RT.

Exam Note: Distinguish low and high pressure forms of Z.

Question Level 3, One or more correct, Question 15. A open ended mercury manometer is used to measure the pressure exerted by a trapped gas as shown in the figure. Initially manometer shows no difference in mercury level in both columns as shown in diagram. [Figure: open-ended U-tube Hg manometer connected to a vessel containing gas A; external pressure P = 76 cm Hg; the mercury levels are equal.] After sparking 'A' dissociates according to following reaction A(g) → B(g) + 3C(g). If pressure of Gas "A" decreases to 0.9 atm. Then (Assume temperature to be constant and is 300 K)
(a) total pressure increased to 1.3 atm
(b) total pressure increased by 0.3 atm
(c) total pressure increased by 22.3 cm of Hg
(d) difference in mercury level is 228 mm.

Solution. Answer (from key): (a, b, d). Initial pressure of A = 1 atm. A decreases by 0.1 atm, forming 0.1 atm of B and 0.3 atm of C. Ptotal = 0.9 + 0.1 + 0.3 = 1.3 atm, an increase of 0.3 atm = 0.3 × 76 = 22.8 cm Hg = 228 mm Hg. So (a), (b), (d) are correct; (c) is wrong because the rise is 22.8 cm, not 22.3 cm.

Teacher's Note: One A gives four gas molecules, so 0.1 atm of A adds 0.4 atm; net rise 0.3 atm.

Exam Note: Convert 0.3 atm to 22.8 cm Hg.

Question Level 3, One or more correct, Question 16. Select incorrect statements for real gas:
(a) Gases have only attraction forces in low pressure region
(b) Volume of gas particles is not negligible in low pressure
(c) Gases behaves as an ideal gas at low pressure
(d) In high pressure region attractive forces dominates

Solution. Answer (from key): (a, b, d) (the printed key says (a, b, c)). Corrected: the question asks for incorrect statements. (a) is incorrect: both attractive and repulsive forces exist, and at low pressure the molecules are far apart. (b) is incorrect: at low pressure the particle volume is negligible compared with the container. (c) is a correct statement (real gases are nearly ideal at low pressure), so it must not be selected. (d) is incorrect: at high pressure repulsive forces (volume effect) dominate. Hence the incorrect statements are (a), (b), (d).

Teacher's Note: Low pressure: molecules far apart, ideal behaviour; high pressure: repulsion (size) dominates, Z > 1.

Exam Note: Pick the false statements only.

Question Level 3, One or more correct, Question 17. Select correct statements:
(a) A real gas can be liquefied at critical temperature
(b) Critical pressure is the maximum pressure at which substance present in its liquid state at TC
(c) Ideal gas can be liquefied below TC
(d) Critical volume is the molar volume of substance in gaseous state at TC and PC

Solution. Answer (from key): (a, d). (a) At Tc (with Pc) a real gas just liquefies. (d) Vc is the molar volume at Tc and Pc. (b) is false: Pc is the minimum pressure needed to liquefy at Tc. (c) is false: an ideal gas has no attractions and cannot be liquefied.

Teacher's Note: Pc is the minimum (not maximum) pressure to liquefy at Tc; ideal gas never liquefies.

Exam Note: Define Pc, Tc, Vc precisely.

Question Level 3, One or more correct, Question 18. Which is/are correct for real gases?
(a) LtP→0 (PVm) = constant at constant high temperature
(b) LtVm→0 (PVm) = constant at constant low temperature
(c) LtP→0 (PVm/RT) = 1 at high temperature
(d) LtVm→0 (PVm/RT) = R

Solution. Answer (from key): (a, c). Low pressure and high temperature make a real gas behave ideally, so PVm = RT (constant at constant T) and PVm/RT = 1. (b) and (d) involve Vm → 0, which is not the ideal limit.

Teacher's Note: The ideal limit is P → 0 (large Vm), giving PVm = RT and Z = 1.

Exam Note: State that P → 0 gives Z = 1.

Question Level 3, One or more correct, Question 19. Select incorrect statement(s)
(a) At very low pressure real gases show minimum deviation from ideal behaviour.
(b) The compressibility factor for an ideal gas is zero.
(c) At Boyle temperature real gas behave as ideal gas in high pressure region.
(d) Real gas show maximum deviation at high pressure and low temperature.

Solution. Answer (from key): (b, c). (a) is true. (b) is incorrect: Z = 1 for an ideal gas. (c) is incorrect: at the Boyle temperature the gas is ideal over a range of low pressures, not at high pressure. (d) is true.

Teacher's Note: Ideal gas has Z = 1; Boyle temperature gives ideal behaviour at low pressure only.

Exam Note: Z = 1, not 0, for ideal gas.

Question Level 3, One or more correct, Question 20. If an ideal gas is heated at constant pressure:
(a) The volume increases
(b) The mass of gas remains same
(c) The kinetic energy of the molecules increases
(d) Attraction forces between gas particles increases

Solution. Answer (from key): (a, b, c). Heating at constant P increases V (Charles' law) and the average KE; mass is unchanged. An ideal gas has no intermolecular attraction, so (d) is false.

Teacher's Note: Heating raises KE and volume; ideal gases have no intermolecular forces to strengthen.

Exam Note: Mention that ideal gases have no attractions.

Level 3: Match the Column

Question Level 3, Match the column, Question 1. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
Column-IColumn-II
(A) Boyle's temperature(P) a/Rb
(B) Inversion temperature(Q) 8a/27Rb
(C) Critical temperature(R) 2a/Rb
(D) Critical pressure(S) a/27b²

Solution. Answer (from key): A→P; B→R; C→Q; D→S. Boyle temperature TB = a/Rb; maximum inversion temperature Ti = 2a/Rb; critical temperature Tc = 8a/27Rb; critical pressure Pc = a/27b².

Teacher's Note: Memorise TB = a/Rb, Ti = 2a/Rb = 2TB, Tc = 8a/27Rb, Pc = a/27b².

Exam Note: Write all four van der Waals constants relations.

Question Level 3, Match the column, Question 2. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
Column-IColumn-II
(A) Root mean square velocity(P) (3/2)RT
(B) Most probable velocity(Q) √(8P/πd)
(C) Average velocity(R) √(3P/d)
(D) K.E. of gas mol-1(S) √(2RT/M)

Solution. Answer (from key): A→R; B→S; C→Q; D→P. urms = √(3RT/M) = √(3P/d) (since PM = dRT); most probable speed = √(2RT/M); average speed = √(8RT/πM) = √(8P/πd); kinetic energy of one mole = (3/2)RT.

Teacher's Note: Use PM = dRT to rewrite √(3RT/M) as √(3P/d) and √(8RT/πM) as √(8P/πd).

Exam Note: Order of speeds: ump < uav < urms.

Question Level 3, Match the column, Question 3. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
Column-IColumn-II
(A) If force of attraction among the gas molecules be negligible(P) (P + a/V²)(V − b) = RT
(B) If the volume of the gas molecules be negligible(Q) PV = RT − a/V
(C) At STP(R) PV = RT + Pb
(D) At low pressure and at high temperature(S) PV = RT

Solution. Answer (from key): A→R; B→Q; C→P; D→S. a = 0 gives PV = RT + Pb (R). b = 0 gives PV = RT − a/V (Q). At STP a real gas follows the full van der Waals equation (P). At low pressure and high temperature it is ideal, PV = RT (S).

Teacher's Note: Zero a leaves only the repulsive size effect; zero b leaves only attraction; low P, high T is ideal.

Exam Note: Set a or b to zero to match.

Question Level 3, Match the column, Question 4. Match gases under specified conditions listed in Column I with their properties/laws in Column II.
Column-IColumn-II
(A) Hydrogen gas (P = 200 atm, T = 273 K)(P) Compressibility factor ≠ 1
(B) Hydrogen gas (P ~ 0, T = 273 K)(Q) Attractive forces are dominant
(C) CO2 (P = 1 atm, T = 273 K)(R) PV = nRT
(D) Real gas with very large molar volume(S) P(V − nb) = nRT

Solution. Answer (from key): A→P, S; B→R; C→P, Q; D→R. (A) At 200 atm hydrogen is non-ideal (Z > 1) and the size effect dominates, so P(V − nb) = nRT: P, S. (B) At P → 0 it is ideal: PV = nRT. (C) CO2 at 1 atm and 273 K is non-ideal with attraction dominant (Z < 1): P, Q. (D) Very large molar volume means ideal behaviour: PV = nRT.

Teacher's Note: H2 at high pressure: b dominates; CO2 near STP: attraction dominates; large molar volume gives ideal gas.

Exam Note: Note which entries have two matches.

Question Level 3, Match the column, Question 5. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
Column-IColumn-II
(A) 1/V² vs P for ideal gas at constant T and n.(P) straight line rising from the origin
(B) V vs 1/T for ideal gas at constant P and n.(Q) concave rising curve that flattens (like y = √x)
(C) PT vs T² for ideal gas at constant T and n.(R) convex rising curve (like y = x²)
(D) V vs 1/P² for ideal gas at constant T and n.(S) falling hyperbola
[Figure: the four graphs P, Q, R, S are drawn as a straight rising line (P), a concave rising curve (Q), a convex rising curve (R) and a falling hyperbola (S).]

Solution. Answer (from key): A→R; B→S; C→P; D→Q. (A) PV = constant, so P ∝ √(1/V²) = 1/V; with y = 1/V² and x = P: y ∝ x², a parabola (R). (B) V = kT, so with y = V and x = 1/T, y = k/x, a falling hyperbola (S). (C) The printed condition is read as P ∝ T, so PT = kT², a straight line against T² (P). (D) V = c/P, so with y = V and x = 1/P²: y = c√x (Q).

Teacher's Note: Rewrite each relation as y against x using the gas law, then identify the curve shape.

Exam Note: Write y = f(x) before sketching.

Question Level 3, Match the column, Question 6. Match the correct column from list-1 to list-2 on the basis of following Andrews isotherm of Real gas. [Figure: P against V with three isotherms T1 < T2 < T3. On T1: E to D is the steep liquid branch, D to B is the horizontal portion (liquid and gas coexist), B to A is the gas branch. C is the critical point on T2; G to F is part of the T3 curve above the critical temperature.]
Column-IColumn-II
(A) Substance exist in both liquid and gas state(P) At AB part
(B) Only liquid state exist(Q) At BD part
(C) Substance exist in gas state only(R) At DE part
(D) Real gas is called super critical fluid(S) At point C

(T) At GF curve

Solution. Answer (from key): A→Q, S; B→R; C→P, T; D→T. The horizontal part BD has liquid and vapour in equilibrium (Q); at the critical point C the liquid and gas are just about to merge, which the book counts as both states present (S). DE is the steep liquid branch (R). AB (below Tc) and the GF curve (above Tc) are gas only (P, T). A real gas above Tc and Pc is a supercritical fluid, shown by GF (T).

Teacher's Note: Flat segment: two phases; steep segment: liquid only; curve above Tc: gas, no liquefaction.

Exam Note: Name the isotherm segments carefully.

Question Level 3, Match the column, Question 7. [Figure: Maxwell distribution curve, fraction of particles against speed, with points A, B, C on the curve at three different speeds D, E, F on the speed axis (A the peak, then B, then C).]
Column-IColumn-II
(A) Speed at point 'A' is(P) √(8RT/πM)
(B) Speed at point 'B' is(Q) √(3RT/M)
(C) Speed at point 'C' is(R) Urms
(D) The speed possessed by maximum fraction of the gas particles(S) √(2RT/M)

Solution. Answer (from key): A→S; B→P; C→Q, R; D→S. Speeds on the Maxwell curve increase in the order most probable < average < rms. A is the peak, so it is the most probable speed √(2RT/M) (S). B is the average speed √(8RT/πM) (P). C is the rms speed √(3RT/M) = Urms (Q, R). The speed with maximum fraction of molecules is again the most probable speed (S).

Teacher's Note: On the curve, the peak is ump, then uav, then urms as speed increases.

Exam Note: Order: √2 : √(8/π) : √3.

Level 3: Assertion-Reason Type Questions

Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). (A) Both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1. (B) Both statements are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1. (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE. (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.

Question Level 3, Assertion-Reason, Question 1. STATEMENT-1: The heat absorbed during the isothermal expansion of an ideal gas against vacuum is zero.
STATEMENT-2: The volume occupied by the molecules of an ideal gas is zero.

Solution. Answer (from key): (B). Statement-1 is true: against vacuum w = 0 and ΔU = 0 for an ideal gas at constant T, so q = 0. Statement-2 is also true (ideal gas assumption) but it is not the reason; the reason is that no work is done and the internal energy is unchanged.

Teacher's Note: Heat is zero because w = 0 (vacuum) and ΔU = 0 (isothermal ideal gas).

Exam Note: Give the real reason: no work, no ΔU.

Question Level 3, Assertion-Reason, Question 2. STATEMENT-1: A lighter gas diffuses more rapidly than a heavier gas.
STATEMENT-2: At a given temperature, the rate of diffusion of a gas is inversely proportional to the density.

Solution. Answer (from key): (C). Statement-1 is true (Graham's law). Statement-2 is false: the rate of diffusion is inversely proportional to the square root of the density (or molar mass), not the density itself.

Teacher's Note: Graham's law has a square root: rate ∝ 1/√d.

Exam Note: Quote r ∝ 1/√M.

Question Level 3, Assertion-Reason, Question 3. STATEMENT-1: The value of the van der Waals' constant 'a' is larger for ammonia than nitrogen.
STATEMENT-2: Hydrogen bonding is present in ammonia.

Solution. Answer (from key): (A). Both statements are true. NH3 molecules form hydrogen bonds, giving stronger intermolecular attraction, which is measured by a, so Statement-2 explains Statement-1.

Teacher's Note: Constant a measures attraction; hydrogen bonding strengthens attraction in NH3.

Exam Note: Link a to intermolecular attraction.

Question Level 3, Assertion-Reason, Question 4. STATEMENT-1: Helium shows only positive deviation from ideal behaviour at room temperature.
STATEMENT-2: Helium is an inert gas.

Solution. Answer (from key): (B). Both statements are true, but being inert is not the reason. Helium has very small a (weak attraction) so repulsion (size effect) dominates, giving Z > 1 at all pressures at room temperature.

Teacher's Note: Positive deviation arises from tiny a (weak attraction), not from chemical inertness.

Exam Note: Give small a, dominant b as reason.

Question Level 3, Assertion-Reason, Question 5. STATEMENT-1: CH4, CO2 has value of Z (compressibility factor) less than one at 0°C.
STATEMENT-2: Z < 1 is due to the attractive forces dominate among the molecules.

Solution. Answer (from key): (A). Both are true: at moderate pressure CH4 and CO2 have appreciable a, so attraction dominates and the molar volume is less than ideal, giving Z < 1. Statement-2 explains Statement-1.

Teacher's Note: Z < 1 means molar volume is below ideal because attraction dominates.

Exam Note: State Z < 1 implies attraction dominates.

Question Level 3, Assertion-Reason, Question 6. STATEMENT-1: The Joule-Thomson coefficient for an ideal gas is zero.
STATEMENT-2: There are no intermolecular attractive forces in an ideal gas.

Solution. Answer (from key): (A). Both are true. In a Joule-Thomson expansion the temperature change arises from work done against intermolecular attractions. An ideal gas has none, so the coefficient is zero. Statement-2 explains Statement-1.

Teacher's Note: Joule-Thomson cooling comes from overcoming attractions; ideal gas has none.

Exam Note: Link μJT to intermolecular forces.

Question Level 3, Assertion-Reason, Question 7. STATEMENT-1: The average translational kinetic energy per molecule of the gas per degree of freedom is 1/2 KT.
STATEMENT-2: For every molecule there are three rotational degree of freedom.

Solution. Answer (from key): (C). Statement-1 is true (equipartition: (1/2)kT per degree of freedom). Statement-2 is false: a monatomic gas has no rotational degrees of freedom and a linear molecule has two; only non-linear molecules have three.

Teacher's Note: Rotational degrees: 0 (monatomic), 2 (linear), 3 (non-linear).

Exam Note: Cite exceptions to three rotational degrees.

Question Level 3, Assertion-Reason, Question 8. STATEMENT-1: On increasing the temperature, the height of the peak of the Maxwell distribution curve decreases.
STATEMENT-2: The fraction of molecules is very less at the higher velocities.

Solution. Answer (from key): (B). Statement-1 is true: the curve flattens and broadens as T rises, with the area fixed. Statement-2 is a true remark about high speeds but it does not explain the lower peak, which results from the molecules spreading over a wider range of speeds while the total area stays constant.

Teacher's Note: Fixed total area means a broader curve must have a lower peak.

Exam Note: Use constant area to explain lower peak.

Question Level 3, Assertion-Reason, Question 9. STATEMENT-1: The gases He and H2 are very different in their behaviour at any temperature and pressure but their compressibility factors are nearly the same at the critical point.
STATEMENT-2: They have nearly the same critical constant.

Solution. Answer (from key): (C). Statement-1 is true: the critical compressibility factor Zc = PcVc/RTc is nearly the same (about 0.3) for most gases. Statement-2 is false: the critical constants Pc, Vc, Tc of He and H2 differ considerably.

Teacher's Note: Zc is similar for many gases, even though Pc, Vc, Tc differ.

Exam Note: Say Zc is similar, constants differ.

Question Level 3, Assertion-Reason, Question 10. STATEMENT-1: Most probable velocity is the velocity possessed by maximum fraction of molecules at the same temperature.
STATEMENT-2: On collision, more and more molecules acquire higher velocity at the same temperature.

Solution. Answer (from key): (C). Statement-1 is true (definition of most probable speed). Statement-2 is false: at a fixed temperature the distribution of speeds stays the same even though collisions exchange energy between molecules.

Teacher's Note: At fixed T the Maxwell distribution is stable despite collisions.

Exam Note: Distribution stays steady at constant T.

Question Level 3, Assertion-Reason, Question 11. STATEMENT-1: Plot of P vs 1/V (volume) is a straight line for an ideal gas.
STATEMENT-2: Pressure is directly proportional to volume for an ideal gas.

Solution. Answer (from key): (C). Statement-1 is true: at constant T and n, P = nRT × (1/V) is linear with zero intercept. Statement-2 is false: pressure is inversely proportional to volume.

Teacher's Note: Boyle's law: P ∝ 1/V, not P ∝ V.

Exam Note: State inverse proportionality.

Question Level 3, Assertion-Reason, Question 12. STATEMENT-1: 1 mol of O2 at 0°C and 1 bar pressure, considering ideal behaviour has a volume of 22.7 L.
STATEMENT-2: Molar volume for all ideal gases at the same temperature and pressure are equal.

Solution. Answer (from key): (A). Both are true. V = RT/P = (0.08314 × 273.15)/1 = 22.71 L at 1 bar, and Avogadro's law says equal volumes at the same T and P hold equal moles, so molar volumes of all ideal gases are the same.

Teacher's Note: Molar volume 22.7 L at 0°C and 1 bar; 22.4 L at 1 atm.

Exam Note: Distinguish 1 bar (22.7 L) from 1 atm (22.4 L).

Question Level 3, Assertion-Reason, Question 13. STATEMENT-1: Reacting gases react to form a new gas having pressure equal to the sum of their partial pressure.
STATEMENT-2: Pressure exerted by a mixture of non-reacting gases present in a container is equal to the sum of their partial pressures.

Solution. Answer (from key): (D). Statement-1 is false: the pressure of the product depends on its moles produced; it is not the sum of the reactants' pressures. Statement-2 is true (Dalton's law of partial pressures for non-reacting gases).

Teacher's Note: Dalton's law applies only to non-reacting gases.

Exam Note: Mention Dalton applies to non-reacting mixtures.

Question Level 3, Assertion-Reason, Question 14. STATEMENT-1: 1/4th of the initial mole of the air is expelled, if air present in an open vessel is heated from 27°C to 127°C.
STATEMENT-2: Rate of diffusion of a gas is inversely proportional to the square root of its molecular mass.

Solution. Answer (from key): (B). Statement-1 is true: in an open vessel V and P are constant, so n ∝ 1/T; n2/n1 = 300/400 = 3/4, so 1/4 is expelled. Statement-2 is also true (Graham's law) but unrelated to the expelled fraction.

Teacher's Note: Open vessel: constant P and V means n ∝ 1/T.

Exam Note: Convert to kelvin: 300 K and 400 K.

Question Level 3, Assertion-Reason, Question 15. STATEMENT-1: Compressibility factor for hydrogen varies with pressure with positive slope at all pressures at 0°C.
STATEMENT-2: Even at low pressures, repulsive forces dominate hydrogen gas at 0°C.

Solution. Answer (from key): (A). Both are true. The Boyle temperature of hydrogen is far below 273 K, so at 0°C the b term dominates, giving Z = 1 + (b − a/RT)P/RT with b − a/RT > 0 and a positive slope from low pressure upward. Statement-2 explains Statement-1.

Teacher's Note: Hydrogen's Boyle temperature is far below 0°C, so Z rises with P.

Exam Note: Z > 1 and rising at all pressures.

Question Level 3, Assertion-Reason, Question 16. STATEMENT-1: Wet air is heavier than dry air.
STATEMENT-2: The density of dry air is less than the density of water at 1 atm and 273 K.

Solution. Answer (from key): (D). Statement-1 is false: water vapour (M = 18) is lighter than air (average M ≈ 29), so humid air is lighter than dry air. Statement-2 is true but irrelevant: it compares a gas with liquid water.

Teacher's Note: Water vapour (M = 18) replaces heavier N2 and O2, lowering density.

Exam Note: Compare molar masses 18 and 29.

Level 3: Subjective Problems

Question Level 3, Subjective, Question 1. Collapsible balloon is inflated to a volume of 10 L at a pressure of 1 atm. When the balloon is immersed to the bottom of a lake, its volume reduce to 1.25 L. Assuming atmospheric pressure to be equivalent to 10 m column of water and no change in temperature. If the depth of the lake is x × 103 cm, what is the value of x ?

Solution. Answer (from key): 7. Boyle's law: P2 = 1 × 10/1.25 = 8 atm at the bottom. Pressure due to water = 8 − 1 = 7 atm = 7 × (10 m of water) = 70 m = 7000 cm = 7 × 103 cm, so x = 7.

Teacher's Note: Boyle's law gives total pressure 8 atm; subtract atmospheric pressure to get water-column pressure.

Exam Note: Subtract 1 atm before converting to metres.

Question Level 3, Subjective, Question 2. A gaseous mixture containing equal moles of H2, O2 and He is subjected to series of effusion steps. The composition (by moles) of effused mixture after 4 effusion steps is x : 1 : y respectively. Then find the value of (x/y).

Solution. Answer (from key): 4. Each step multiplies the relative amount of a gas by √(Mref/M) (rate ∝ 1/√M). After 4 steps the composition ∝ (1/√M)4 = 1/M²: H2 : O2 : He = 1/4 : 1/1024 : 1/16. Taking O2 = 1: H2 = 1024/4 = 256 and He = 1024/16 = 64. So x : 1 : y = 256 : 1 : 64 and x/y = 4.

Teacher's Note: After n steps the composition scales as (M)−n/2; for 4 steps this is 1/M².

Exam Note: Raise the Graham ratio to the 4th power.

Question Level 3, Subjective, Question 3. One mole of a gas changed from its initial state (15 L, 2 atm) to final state (4 L, 10 atm) reversibly. If this change can be represented by a straight line in P − V curve maximum temperature (approximate), the gas attained is x × 102 K. Then find the value of x.

Solution. Answer (from key): 7. Line through (15, 2) and (4, 10): P = 2 − (8/11)(V − 15) = (142 − 8V)/11. Then PV = (142V − 8V²)/11 is maximum when 142 − 16V = 0, V = 8.875 L and P = (142 − 71)/11 = 6.45 atm. Tmax = PV/(nR) = (6.45 × 8.875)/0.0821 ≈ 698 K ≈ 7 × 102 K, so x = 7.

Teacher's Note: For a linear P-V path T ∝ PV, so differentiate PV with respect to V to find its maximum.

Exam Note: Maximise PV, then divide by nR.

Question Level 3, Subjective, Question 4. Two moles of an ideal gas undergoes the following process. Given that (∂P/∂T)V is x × 10-y, then calculate the value of (x + y) [Figure: straight line of P (atm) against t(°C) passing through the points (27, 3) and (127, 4) and extrapolating to P = 0 at −273.15°C; the number of moles marked is 2.]

Solution. Answer (from key): 3. At constant volume the plot of P against T is a straight line, so (∂P/∂T)V is its slope = (4 − 3)/(127 − 27) = 1/100 = 1 × 10-2 atm/K. Thus x = 1, y = 2 and x + y = 3. (Check: the line extrapolates to P = 0 at 27 − 300 = −273°C.)

Teacher's Note: At constant V the P-T line is straight; its slope between two points is (∂P/∂T)V = nR/V.

Exam Note: Write slope as 1 × 10-2.

Question Level 3, Subjective, Question 5. If 1 mole of a diatomic gas present in 10 L vessel at certain temperature exert a pressure of 0.96 atm. Under similar conditions an ideal gas exerted 1.0 atm pressure. If volume of gas molecule is negligible. Then find the value of van der Waals' constant "a" (in atm L2/mol2).

Solution. Answer (from key): 4. With b negligible, P = RT/V − a/V². The ideal pressure RT/V = 1.0 atm, so 0.96 = 1.0 − a/(10)², giving a/100 = 0.04 and a = 4 atm L2/mol2.

Teacher's Note: Neglecting b, the real pressure is the ideal pressure minus a n²/V².

Exam Note: Use n = 1 mol and V = 10 L.

Question Level 3, Subjective, Question 6. The graph of compressibility factor (Z) vs. P for one mole of a real gas is shown in following diagram. The graph is plotted at constant temperature 273 K. If the slope of graph at very high pressure (dZ/dP) is (1/2.8) atm-1, then calculate volume of one mole of real gas molecules (in L/mol). Given: NA = 6 × 1023 and R = (22.4/273) L atm K-1 mol-1 [Figure: Z against P: Z dips below 1 at low pressure, reaches a minimum, then rises as a straight line at high pressure with slope dZ/dP = 1/2.8 atm-1.]

Solution. Answer (from key): 2. At high pressure Z = 1 + bP/RT, so dZ/dP = b/RT = 1/2.8. RT = (22.4/273) × 273 = 22.4 L atm/mol, so b = 22.4/2.8 = 8 L/mol. Since b = 4 × (actual volume of the molecules in one mole), volume of the molecules = b/4 = 2 L/mol.

Teacher's Note: High-pressure slope of Z gives b/RT; the molecules' own volume is b/4.

Exam Note: Remember b = 4 × molecular volume.

Question Level 3, Subjective, Question 7. Under the identical conditions of temperature, the density of a gas X is two times to that of gas Y while molecular mass of gas Y is three times that of X. Calculate the ratio of pressure of X and Y.

Solution. Answer (from key): 6. From P = dRT/M at the same T: PX/PY = (dX/dY)(MY/MX) = 2 × 3 = 6.

Teacher's Note: Use P = dRT/M; pressure rises with density and falls with molar mass.

Exam Note: Write P = dRT/M first.

Question Level 3, Subjective, Question 8. The time taken for a certain volume of a certain gas to diffuse through a small hole was 2 min. Under similar conditions an equal volume of oxygen took 5.65 min to pass. What is the molecular mass of gas (in amu)?

Solution. Answer (from key): 4. Time ∝ √M: tgas/tO2 = √(M/32), so M = 32 × (2/5.65)² = 32 × 0.1253 ≈ 4 amu.

Teacher's Note: For equal volumes, time of effusion is proportional to √M.

Exam Note: Square the time ratio.

Question Level 3, Subjective, Question 9. If excess F2(g) reacts at 150°C and 1.0 atm pressure with Br2(g) to give a compound BrFn, if 423 mL of Br2(g) at the same temperature and pressure produced 4.2 g of BrFn, what is n ? [Atomic mass Br = 80, F = 19]

Solution. Answer (from key): 5. Moles of Br2 = PV/RT = (1 × 0.423)/(0.0821 × 423) = 0.01218 mol. Br2 + nF2 → 2BrFn, so moles of BrFn = 0.02436 mol. Molar mass = 4.2/0.02436 = 172.4 g/mol = 80 + 19n, so n = 4.86 ≈ 5 (BrF5, M = 175).

Teacher's Note: Each Br2 gives two BrFn; molar mass from mass and moles fixes n.

Exam Note: Use T = 423 K, and remember two Br atoms.

Question Level 3, Subjective, Question 10. Initially bulb 'A' contained oxygen gas at 27°C and 950 mm of Hg and bulb 'B' contained neon at 27°C and 900 mm of Hg. The bulbs are connected by a narrow tube of negligible volume equipped with a stopcock and gases were allowed to mix-up freely. Then obtain pressure in the combined system was found to be 910 mm of Hg. If volume of bulb B was measured to be 10 L, then find the mass of oxygen gas present initially in bulb 'A'. [Figure: two bulbs, A (O2) and B (Ne), joined through a closed valve.]

Solution. Answer (from key): 4. Let VA be the volume of A. At constant T, 950VA + 900 × 10 = 910(VA + 10), so 40VA = 100 and VA = 2.5 L. Moles of O2 = PV/RT = (950/760 × 2.5)/(0.0821 × 300) = 0.1269 mol. Mass = 0.1269 × 32 ≈ 4.06 g ≈ 4 g.

Teacher's Note: Sum of P×V before mixing equals final P times total volume; then use PV = nRT for O2.

Exam Note: Find VA first from the pressure balance.

Question Level 3, Subjective, Question 11. Air is trapped in a horizontal glass tube by 40 cm mercury column as shown below: [Figure: horizontal tube closed at the left end with air at 1 atm, then a mercury column; the figure marks the length 36 cm under the mercury.] If the tube is held vertical keeping the open end up, length of air column shrink to 19 cm. What is the length (in cm) by which the mercury column shifts down?

Solution. Answer (from key): 9. The printed solution uses the 36 cm marked in the figure as the mercury column height. Vertical, open end up: Pf = 1 + 36/76 = 112/76 atm. Boyle's law with initial air length hi at 1 atm: 1 × hiA = (112/76) × 19A, so hi = 28 cm. Shift of the mercury column = hi − hf = 28 − 19 = 9 cm.

Teacher's Note: Vertical tube adds the mercury head to atmospheric pressure; apply Boyle's law to the air column.

Exam Note: Add mercury column pressure (36/76 atm) to 1 atm.

Question Level 3, Subjective, Question 12. A flask containing air at 107°C and 722 mm of Hg is cooled to 100 K and 760 mm of Hg. If density in the initial condition 1 g/cm3, then what is the final density (g/cm3)?

Solution. Answer (from key): 4. d = PM/RT, so diTi/Pi = dfTf/Pf. df = (Pf/Pi)(Ti/Tf)di = (760/722)(380/100) × 1 = 4 g/cm3, with Ti = 107 + 273 = 380 K.

Teacher's Note: Density is proportional to P/T for the same gas: d = PM/RT.

Exam Note: Convert 107°C to 380 K.

Question Level 3, Subjective, Question 13. If an ideal gas at 100 K is heated to 109 K in a rigid container, the pressure increases by X%. What is the value of X?

Solution. Answer (from key): 9. V and n constant, so P ∝ T: Pf = (109/100)Pi. Pressure increase = (Pf − Pi)/Pi × 100 = 9%, so X = 9.

Teacher's Note: Rigid container means constant volume, so pressure rises in the same ratio as temperature (Gay-Lussac).

Exam Note: Percentage change equals ΔT/T × 100.

Question Level 3, Subjective, Question 14. The vander Waals' constants for a gas are a = 3.6 atm L2 mol-2, b = 0.6 L mol-1. If R = 0.08 L atm K-1 mol-1. If the Boyle's temperature (K) is TB of this gas, then what is the value of TB/15 ?

Solution. Answer (from key): 5. TB = a/(Rb) = 3.6/(0.08 × 0.6) = 75 K. TB/15 = 75/15 = 5.

Teacher's Note: Boyle temperature of a van der Waals gas is a/Rb.

Exam Note: Compute TB = 75 K, then divide by 15.

Question Level 3, Subjective, Question 15. A flask has 10 gas particles out of which four particles are moving at 7 ms-1 and the remaining are moving at the same speed of 'X' ms-1. If the r.m.s. of the gas is 5 ms-1, what is the value of X ?

Solution. Answer (from key): 3. urms² = (N1u1² + N2u2²)/(N1 + N2): 25 = (4 × 7² + 6X²)/10, so 250 = 196 + 6X², X² = 9 and X = 3 m s-1.

Teacher's Note: rms speed averages the squares of speeds over all particles: here 4 at 7 m/s and 6 at X.

Exam Note: Average squares, not speeds.

Narendra Awasthi Solutions for JEE Mathematics: Narendra Awasthi Solutions Physical Chemistry Chapter 3 Gaseous State Part 2

Access JEE Mathematics Solutions

Access the complete chapter-wise PDF for Narendra Awasthi Solutions Physical Chemistry Chapter 3 Gaseous State Part 2. These structured Narendra Awasthi Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

In addition to these Narendra Awasthi Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these Narendra Awasthi Solutions for JEE Chemistry?

They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Narendra Awasthi JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Narendra Awasthi solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Narendra Awasthi JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.