Narendra Awasthi Solutions Physical Chemistry Chapter 3 Gaseous State Part 1

Official Narendra Awasthi Textbook Solutions: JEE Chemistry Chapter 03 Gaseous State

Access comprehensive textbook solutions for Chapter 03 Gaseous State using the Narendra Awasthi reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Chemistry: Chapter 03 Gaseous State

View or download the dedicated Chapter 03 Gaseous State solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

Gaseous State - Problems in Chemistry (Level 1 Questions 1-175 and Level 2 Questions 1-11)

Level 1

Question 1. Which one of the following statements is not correct about the three states of matter i.e., solid, liquid and gaseous ?
(a) Molecules of a solid possess least energy whereas those of a gas possess highest energy
(b) The density of solid is highest whereas that of gases is lowest
(c) Gases and liquids possess definite volumes
(d) Molecules of a solid possess vibratory motion

Solution. Answer: (c) Gases and liquids possess definite volumes. Gases have no definite volume (they fill the container); only solids and liquids have definite volume. So statement (c) is incorrect.

Teacher's Note: Gases take the shape and volume of the container; liquids have definite volume but no shape.

Exam Note: Definite volume: solids and liquids only.

Question 2. Which of the following curve does not represent Boyle's law? (Curves: (a) P versus V, a rectangular hyperbola; (b) log P versus log(V-1), straight line at θ = 45°; (c) log P versus log(V-1), straight line at 135°; (d) PV versus V, a horizontal line.)

Solution. Answer: (c). Boyle's law: PV = k, so log P = log(1/V) + log k. The graph of log P against log(1/V) has slope +1 (θ = 45°), not 135° (slope -1). Hence curve (c) does not represent Boyle's law.

Teacher's Note: Taking logs converts PV = k into a straight line of slope +1 on a log P vs log(1/V) plot.

Exam Note: Check the sign of the slope: tan 135° = -1.

Question 3. A certain sample of gas has a volume of 0.2 litre measured at 1 atm pressure and 0°C. At the same pressure but at 273°C, its volume will be:
(a) 0.4 litre
(b) 0.8 litre
(c) 27.8 litres
(d) 55.6 litres

Solution. Answer: (a) 0.4 litre. V2 = V1T2/T1 = 0.2 × 546/273 = 0.4 litre.

Teacher's Note: Charles' law needs absolute temperature: 0°C = 273 K, 273°C = 546 K, so volume doubles.

Exam Note: Always convert °C to K first.

Question 4. Among the following curves, which is not according to Charles' law? (Curves: (a) V versus T, a straight line; (b) log V versus log T, straight line at 45°; (c) VT versus T2, a straight line; (d) V/T versus V, a straight line with positive slope.)

Solution. Answer: (d). Charles' law: V = kT, so V/T = k is constant. A plot of V/T against V must be a horizontal line, not a sloping line. In (b), log V = log T + log k gives slope 1; in (c), VT = kT2 is linear. So (d) is not according to Charles' law. (The book's label 'log P' in (b) is read as log V.)

Teacher's Note: V/T is constant at fixed P and n, so V/T against V is parallel to the V-axis.

Exam Note: Constant ratio plotted against anything is a horizontal line.

Question 5. At what temperature, the sample of neon gas would be heated to double its pressure, if the initial volume of gas is reduced by 15% at 75°C?
(a) 319°C
(b) 592°C
(c) 128°C
(d) 60°C

Solution. Answer: (a) 319°C. P1V1/T1 = P2V2/T2. T1 = 348 K, P2 = 2P1, V2 = 0.85V1. T2 = 348 × 2 × 0.85 = 591.6 K ≈ 319°C.

Teacher's Note: Use the combined gas law with ratios P2/P1 = 2 and V2/V1 = 0.85; answer is in K, convert back.

Exam Note: Subtract 273 at the end: 591.6 K = 318.6°C.

Question 6. Which is correct curve for Charles' law, when the curve is plotted at 0.821 atm pressure for 10 mole ideal gas? (Curves: (a) V/T (L K-1) versus V, line at 45°; (b) V2/T (L2 K-1) versus V, line at 45°; (c) V versus T, line at 30°; (d) log V versus log T, line at 135°.)

Solution. Answer: (b). V = nRT/P = (10 × 0.0821/0.821) T = T (in litres). So V/T = 1 (a horizontal line, not (a)); V2/T = V, a line of slope 1 (45°) – (b) is correct; V against T has slope 1 (45°), not 30°; log V against log T has slope +1, not 135°.

Teacher's Note: Compute the slope first: nR/P = 10 × 0.0821/0.821 = 1 L/K, giving 45° lines.

Exam Note: Find the numerical slope, then test each graph.

Question 7. At constant volume, for a fixed number of moles of a gas, the pressure of the gas increases with increase in temperature due to:
(a) Increase in the average molecular speed
(b) Increase rate of collision amongst molecules
(c) Increase in molecular attraction
(d) Decrease in mean free path

Solution. Answer: (a) Increase in the average molecular speed. On heating at constant volume the average speed (kinetic energy) of molecules increases, so they strike the walls harder and more often, increasing pressure. The primary cause is the increased average molecular speed: (a).

Teacher's Note: Temperature measures average kinetic energy; faster molecules hit walls with greater force.

Exam Note: Pressure rises due to higher speed, not attraction.

Question 8. Which is not correct curve for Gay-Lussac's law? (Curves: (a) log P versus log T, line at 45°; (b) P (atm) versus T (K), straight line through origin; (c) P/T versus T, horizontal line; (d) P/T versus T, line with positive slope.)

Solution. Answer: (d). Gay-Lussac's law: P/T = constant, so P/T against T is horizontal as in (c). A sloping P/T versus T line (d) is not correct.

Teacher's Note: At constant V and n, P/T is constant; any slope in P/T vs T violates the law.

Exam Note: Constant ratio means a horizontal graph.

Question 9. Three flasks of equal volumes contain CH4, CO2 and Cl2 gases respectively. They will contain equal number of molecules if:
(a) the mass of all the gases is same
(b) the moles of all the gas is same but temperature is different
(c) temperature and pressure of all the flasks are same
(d) temperature, pressure and masses same in the flasks

Solution. Answer: (c) temperature and pressure of all the flasks are same. By Avogadro's law, equal volumes of gases at the same temperature and pressure contain equal numbers of molecules.

Teacher's Note: Avogadro's law: same V, T and P gives same number of molecules regardless of gas.

Exam Note: Equal volumes need equal T and P.

Question 10. Which is incorrect curve for Boyle's law? (Curves: (a) P/V versus 1/V, a rising curve (parabola); (b) log P versus log V, line at 135°; (c) P/V versus 1/V2, a rising curve; (d) PV2 versus V, a straight line. The book's label 'P/N' is read as P/V.)

Solution. Answer: (c). PV = k. (a) P/V = k/V2 = k(1/V)2, a parabola in 1/V: correct. (b) log P = -log V + log k, slope -1 (135°): correct. (d) PV2 = kV, a straight line: correct. (c) P/V = k(1/V2) would be a straight line, but the curve shown is not straight, so (c) is incorrect.

Teacher's Note: Substitute P = k/V into each plotted quantity and see whether the graph should be a line or a curve.

Exam Note: Algebra first: decide line or curve, then compare.

Question 11. "Equal volumes of all gases at the same temperature and pressure contain equal number of particles." This statement is a direct consequence of:
(a) Avogadro's law
(b) Charles' law
(c) Ideal gas equation
(d) Law of partial pressure

Solution. Answer: (a) Avogadro's law. The statement is Avogadro's law (V ∝ n at constant T and P).

Teacher's Note: This is the textbook statement of Avogadro's hypothesis; the ideal gas equation is more general.

Exam Note: Name the law from its statement.

Question 12. A 2.24 L cylinder of oxygen at 1 atm and 273 K is found to develop a leakage. When the leakage was plugged the pressure dropped to 570 mm of Hg. The number of moles of gas that escaped will be:
(a) 0.025
(b) 0.050
(c) 0.075
(d) 0.09

Solution. Answer: (a) 0.025. Initial moles n = PV/RT = (1 × 2.24)/(0.0821 × 273) = 0.1 mol. Final moles = 0.1 × 570/760 = 0.075 mol. Escaped = 0.1 - 0.075 = 0.025 mol.

Teacher's Note: At constant V and T, n is proportional to P; 2.24 L at STP is 0.1 mol.

Exam Note: Escaped moles = initial minus remaining.

Question 13. Which of the following curve is correct for an ideal gas? ((a) P versus V at n, T constant, drawn as a straight rising line; (b) P versus T at V, n constant, a falling line; (c) P versus n at V, T constant, a rising straight line; (d) V versus T at P, n constant.)

Solution. Answer: (c). At constant V and T, P = (RT/V)n, so P is directly proportional to n: a straight line, curve (c). (a) should be a hyperbola and (b) should rise with T. (Answer as given in the book's key.)

Teacher's Note: Write the ideal gas equation in the form of the plotted variables to see which are proportional.

Exam Note: Boyle: P vs V is a hyperbola, not a line.

Question 14. In the equation of state of an ideal gas PV = nRT, the value of the universal gas constant is not correct:
(a) 8.314 J K-1 mol-1
(b) 0.0821 atm L mol-1 K-1
(c) 0.8314 bar L mol-1 K-1
(d) 2 cal mol-1 K-1

Solution. Answer: (c) 0.8314 bar L mol-1 K-1. R = 0.08314 bar L mol-1 K-1, not 0.8314. So (c) is not correct.

Teacher's Note: R = 8.314 J/(K mol) = 0.0821 L atm/(K mol) = 0.08314 L bar/(K mol) = about 2 cal.

Exam Note: Memorise R in J, atm L, bar L and cal.

Question 15. At 0°C and one atm pressure, a gas occupies 100 cc. If the pressure is increased to one and a half-time and temperature is increased by one-third of absolute temperature, then final volume of the gas will be:
(a) 80 cc
(b) 88.9 cc
(c) 66.7 cc
(d) 100 cc

Solution. Answer: (b) 88.9 cc. V2 = V1(P1/P2)(T2/T1) = 100 × (1/1.5) × (4/3) = 88.9 cc.

Teacher's Note: Increased by one-third of absolute temperature means T2 = (4/3)T1.

Exam Note: Read 'by one-third' carefully: factor is 4/3, not 1/3.

Question 16. 10 gm of a gas at 1 atm and 273 K occupies 5 litres. The temperature at which the volume becomes double for the same mass of gas at the same pressure is:
(a) 273 K
(b) -273°C
(c) 273°C
(d) 546°C

Solution. Answer: (c) 273°C. At constant P and mass, V ∝ T. Doubling V doubles T: 546 K = 273°C.

Teacher's Note: Charles' law: volume doubles when absolute temperature doubles, so 546 K, i.e. 273°C.

Exam Note: Convert 546 K back to °C: 273°C.

Question 17. Which of the following curve does not represent Gay-Lussac's law? ((a) P (atm) versus t°C, a line passing through the origin; (b) P (atm) versus t°C, a line with positive intercept on the pressure axis; (c) P (atm) versus T (K), line through origin; (d) log P versus log T, line at 45°.)

Solution. Answer: (a). P = P0(1 + t/273): P versus t°C has a positive intercept on the P-axis (b), not a line through the origin. P versus T(K) passes through the origin (c); log P versus log T has slope 1 (d). So (a) is not correct.

Teacher's Note: P is zero at -273°C, not at 0°C, so a P vs t°C line cannot pass through the origin.

Exam Note: Origin line only on the Kelvin scale.

Question 18. Densities of two gases are in the ratio 1 : 2 and their temperatures are in the ratio 2 : 1, then the ratio of their respective molar mass at certain pressure is:
(a) 1 : 1
(b) 1 : 2
(c) 2 : 1
(d) 4 : 1

Solution. Answer: (a) 1 : 1. M = dRT/P, so at the same pressure M1/M2 = (d1T1)/(d2T2) = (1 × 2)/(2 × 1) = 1 : 1.

Teacher's Note: Use M = dRT/P; with P equal, M is proportional to the product dT.

Exam Note: Multiply density ratio by temperature ratio.

Question 19. Two separate bulbs contain ideal gases A and B. The density of gas A is twice that of gas B. The molecular mass of A is half that of gas B. The two gases are at the same temperature. The ratio of the pressure of A to that of gas B is:
(a) 2
(b) 1/2
(c) 4
(d) 1/4

Solution. Answer: (c) 4. P = dRT/M. PA/PB = (dA/dB)(MB/MA) = 2 × 2 = 4.

Teacher's Note: Pressure is proportional to d/M at the same T; both ratios work in favour of A.

Exam Note: Invert the molar mass ratio: MB/MA = 2.

Question 20. Volume of the air that will be expelled from a vessel of 300 cm3 when it is heated from 27°C to 37°C at the same pressure will be:
(a) 310 cm3
(b) 290 cm3
(c) 10 cm3
(d) 37 cm3

Solution. Answer: (c) 10 cm3. V2 = 300 × 310/300 = 310 cm3. Air expelled = 310 - 300 = 10 cm3.

Teacher's Note: Vessel volume is fixed, so the expanded gas beyond 300 cm3 leaves the vessel.

Exam Note: Answer is the increase in volume, not the final volume.

Question 21. V versus T curves at constant pressure P1 and P2 for an ideal gas are shown in the figure (two straight lines through the origin; the line labelled P1 is steeper than the line labelled P2). Which is correct?
(a) P1 > P2
(b) P1 < P2
(c) P1 = P2
(d) All of these

Solution. Answer: (b) P1 < P2. V = (nR/P)T, so the slope is nR/P. The steeper line (P1) has the smaller pressure, so P1 < P2.

Teacher's Note: Slope of a V-T line is nR/P: larger slope means smaller pressure.

Exam Note: Isobars: steeper means lower pressure.

Question 22. Two flasks A and B of 500 mL each are respectively filled with O2 and SO2 at 300 K and 1 atm pressure. The flasks will contain:
(a) The same number of atoms
(b) The same number of molecules
(c) More number of moles of molecules in flask A as compared to flask B
(d) The same amount of gas

Solution. Answer: (b) The same number of molecules. Equal volumes at the same T and P contain equal numbers of molecules (Avogadro). Atoms differ (2 per O2, 3 per SO2) and masses differ.

Teacher's Note: Same V, T and P means same moles and molecules; atoms depend on atomicity.

Exam Note: Do not confuse molecules with atoms.

Question 23. 2.8 g of a gas at 1 atm and 273 K occupies a volume of 2.24 litres, the gas can not be:
(a) O2
(b) CO
(c) N2
(d) C2H4

Solution. Answer: (a) O2. 2.24 L at STP is 0.1 mol, so M = 2.8/0.1 = 28 g/mol. CO, N2 and C2H4 are all 28; O2 is 32, so the gas cannot be O2.

Teacher's Note: Find molar mass from moles = V/22.4 at STP, then compare with each option.

Exam Note: Three gases share M = 28; O2 is the odd one.

Question 24. Five grams each of the following gases at 87°C and 750 mm pressure are taken. Which of them will have the least volume?
(a) HF
(b) HCl
(c) HBr
(d) HI

Solution. Answer: (d) HI. For equal mass, V = (w/M)RT/P is inversely proportional to M. HI has the highest molar mass (128), so it has the least volume.

Teacher's Note: Equal masses: fewer moles for heavier molar mass, hence smaller volume.

Exam Note: Highest molar mass gives least volume.

Question 25. At what pressure a quantity of gas will occupy a volume of 60 mL, if it occupies a volume of 100 mL at a pressure of 720 mm (while temperature is constant):
(a) 700 mm
(b) 800 mm
(c) 100 mm
(d) 1200 mm

Solution. Answer: (d) 1200 mm. P1V1 = P2V2: P2 = 720 × 100/60 = 1200 mm.

Teacher's Note: Boyle's law: volume reduced to 60% means pressure rises by 1/0.6.

Exam Note: Pressure and volume are inversely proportional.

Question 26. At 1 atm and 273 K the density of gas, whose molecular weight is 45, is:
(a) 44.8 g/L
(b) 11.4 g/L
(c) 2 g/L
(d) 3 g/L

Solution. Answer: (c) 2 g/L. d = PM/RT = (1 × 45)/(0.0821 × 273) = 2.0 g/L (equivalently 45/22.4).

Teacher's Note: At STP one mole occupies 22.4 L, so density = M/22.4.

Exam Note: Use d = PM/RT with R in atm L units.

Question 27. A small bubble rises from the bottom of a lake, where the temperature and pressure are 8°C and 6.0 atm, to the water's surface, where the temperature is 25°C and pressure is 1.0 atm. Calculate the final volume of the bubble if its initial volume was 2 mL.
(a) 14 mL
(b) 12.72 mL
(c) 11.31 mL
(d) 15 mL

Solution. Answer: (b) 12.72 mL. The moles of gas are constant: V2 = V1(P1/P2)(T2/T1) = 2.0 × (6.0/1.0) × (298/281) = 12.72 mL.

Teacher's Note: Combined gas law with n constant; temperatures must be in kelvin.

Exam Note: Use 281 K and 298 K, not Celsius.

Question 28. Argon is an inert gas used in light bulbs to retard the vaporization of the filament. A certain light-bulb containing argon at 1.25 atm and 18°C is heated to 85°C at constant volume. Calculate its final pressure.
(a) 1.53 atm
(b) 1.25 atm
(c) 1.35 atm
(d) 2 atm

Solution. Answer: (a) 1.53 atm. P2 = P1T2/T1 = 1.25 × 358/291 = 1.54 atm, i.e. 1.53 atm (option (a)).

Teacher's Note: Gay-Lussac's law at constant volume: pressure is proportional to absolute temperature.

Exam Note: Use kelvin: 291 K and 358 K.

Question 29. Calculate the volume of O2 at 1 atm and 273 K required for the complete combustion of 2.64 L of acetylene (C2H2) at 1 atm and 273 K. 2C2H2(g) + 5O2(g) → 4CO2(g) + 2H2O(l)
(a) 3.6 L
(b) 1.056 L
(c) 6.6 L
(d) 10 L

Solution. Answer: (c) 6.6 L. From the equation 2 volumes of C2H2 need 5 volumes of O2 (same T and P). V(O2) = 2.64 × 5/2 = 6.6 L.

Teacher's Note: Gay-Lussac's law of volumes: gas volumes at same T, P follow mole ratios.

Exam Note: Use the 2 : 5 mole ratio directly for volumes.

Question 30. The density of O2(g) is maximum at:
(a) STP
(b) 273 K and 2 atm
(c) 546 K and 1 atm
(d) 546 K and 2 atm

Solution. Answer: (b) 273 K and 2 atm. d = PM/RT. Density is greatest where P/T is greatest: STP gives 1/273, (b) gives 2/273, (c) gives 1/546, (d) gives 2/546. So (b) is maximum.

Teacher's Note: Density is proportional to P/T; compare P/T values for the options.

Exam Note: Compare P/T for every option.

Question 31. At 27°C a sample of ammonia gas exerts a pressure of 5.3 atm. What is the pressure when the volume of the gas is reduced to one-tenth of the original value at the same temperature:
(a) 0.53 atm
(b) 5.3 atm
(c) 53 atm
(d) None of these

Solution. Answer: (c) 53 atm. Boyle's law: P2 = P1V1/V2 = 5.3 × 10 = 53 atm.

Teacher's Note: Constant T: pressure rises tenfold when volume falls to one-tenth.

Exam Note: Inverse proportion: multiply by 10.

Question 32. A certain amount of gas at 25°C and at a pressure of 0.80 atm is contained in a glass vessel. Suppose that the vessel can withstand a pressure of 2.0 atm. How high can you raise the temperature of the gas without bursting the vessel?
(a) 745°C
(b) 472°C
(c) 500°C
(d) None of these

Solution. Answer: (b) 472°C. T2 = T1P2/P1 = 298 × 2.0/0.80 = 745 K = 472°C.

Teacher's Note: Constant volume: T is proportional to P; answer 745 K must be converted to °C.

Exam Note: Option (a) 745 is in kelvin; subtract 273.

Question 33. Which one of these graphs for an ideal gas, the arrow indication is incorrectly marked? ((a) P versus T in K, family of straight lines through the origin, arrow 'decreasing Volume'; (b) V versus t°C, family of straight lines meeting at -273°C, arrow 'decreasing Press'; (c) P versus V, family of hyperbolas, arrow 'Increasing Temp.'; (d) P versus 1/V, family of straight lines through the origin, arrow 'decreasing Press'.)

Solution. Answer: (b). Answer as given in the book's key: (b). (Slopes: nR/V in (a), nR/P in (b), so lower pressure means a steeper V-t line; the arrow in (b) is the incorrectly marked one.)

Teacher's Note: Slopes: P-T lines have slope nR/V, V-T lines have nR/P, P-1/V lines have nRT.

Exam Note: Decide each arrow from the slope formula.

Question 34. The pressure of sodium vapour in a 1.0 L container is 10 torr at 1000°C. How many atoms are in the container?
(a) 9.7 × 1017
(b) 7.6 × 1019
(c) 4.2 × 1017
(d) 9.7 × 1019

Solution. Answer: (b) 7.6 × 1019. n = PV/RT = (10/760 × 1.0)/(0.0821 × 1273) = 1.26 × 10-4 mol. Atoms = 1.26 × 10-4 × 6.022 × 1023 = 7.6 × 1019.

Teacher's Note: Convert torr to atm (divide by 760) and °C to K before using PV = nRT.

Exam Note: Multiply moles by Avogadro's number for atoms.

Question 35. An ideal gaseous mixture of ethane (C2H6) and ethene (C2H4) occupies 28 litre at 1 atm and 273 K. The mixture reacts completely with 128 gm O2 to produce CO2 and H2O. Mole fraction of C2H4 in the mixture is:
(a) 0.6
(b) 0.4
(c) 0.5
(d) 0.8

Solution. Answer: (a) 0.6. Total moles = 28/22.4 = 1.25; O2 = 128/32 = 4 mol. C2H6 + 3.5O2 → 2CO2 + 3H2O; C2H4 + 3O2 → 2CO2 + 2H2O. Let x = mol C2H6, y = mol C2H4: x + y = 1.25; 3.5x + 3y = 4. Solving: x = 0.5, y = 0.75. Mole fraction of C2H4 = 0.75/1.25 = 0.6.

Teacher's Note: Two equations: total moles and oxygen consumed (3.5 vs 3 mol per mole of fuel).

Exam Note: Write balanced combustion equations first.

Question 36. A certain hydrate has the formula MgSO4·xH2O. A quantity of 54.2 g of the compound is heated in an oven to drive off the water. If the steam generated exerts a pressure of 24.8 atm in a 2.0 L container at 120°C, calculate x.
(a) 2
(b) 5
(c) 6
(d) 7

Solution. Answer: (d) 7. n(H2O) = PV/RT = (24.8 × 2.0)/(0.0821 × 393) = 1.537 mol. Mass of water = 1.537 × 18 = 27.7 g; mass of MgSO4 = 54.2 - 27.7 = 26.5 g = 26.5/120.4 = 0.220 mol. x = 1.537/0.220 ≈ 7.

Teacher's Note: Steam moles from PV = nRT give water mass; the remainder is anhydrous MgSO4 (120 g/mol).

Exam Note: x = moles of water per mole of salt.

Question 37. Air entering the lungs ends up in tiny sacs called alveoli. It is from the alveoli that oxygen diffuses into the blood. The average radius of the alveoli is 0.0050 cm and the air inside contains 14 per cent oxygen. Assuming that the pressure in the alveoli is 1.0 atm and the temperature is 37°C, calculate the number of oxygen molecules in one of the alveoli.
(a) 6 × 1013
(b) 1024
(c) 1.7 × 1022
(d) 1.7 × 109

Solution. Answer: (d) 1.7 × 109. Corrected: V = (4/3)πr3 = (4/3)π(0.0050)3 = 5.24 × 10-7 cm3 = 5.24 × 10-10 L. n(total) = PV/RT = (1.0 × 5.24 × 10-10)/(0.0821 × 310) = 2.06 × 10-11 mol; n(O2) = 0.14 × 2.06 × 10-11 = 2.9 × 10-12 mol; molecules = 2.9 × 10-12 × 6.022 × 1023 = 1.7 × 1012. The book's key marks (d) (1.7 × 109); the correct value is 1.7 × 1012, and (d) is the option with the matching digits (printing error in the exponent).

Teacher's Note: Volume of a sphere, PV = nRT, 14% of moles are O2; watch cm3 to litre conversion.

Exam Note: Convert cm3 to L: divide by 1000.

Question 38. Nitrogen forms several gaseous oxides. One of them has a density of 1.33 g/L measured at 764 mmHg and 150°C. Write the formula of the compound.
(a) NO
(b) N2O
(c) NO2
(d) N2O5

Solution. Answer: (c) NO2. M = dRT/P = (1.33 × 0.0821 × 423)/(764/760) = 45.9 g/mol, which matches NO2 (46).

Teacher's Note: Molar mass from density: M = dRT/P with T in kelvin and P in atm.

Exam Note: Compare computed M with 30, 44, 46, 108.

Question 39. Starting out on a trip into the mountains, you inflate the tires on your automobile to a recommended pressure of 3.21 × 105 Pa on a day when the temperature is -5.0°C. You drive to the beach, where the temperature is 28.0°C. Assume that the volume of the tire has increased by 3%. What is the final pressure in the tyres?
(a) 350 Pa
(b) 3500 Pa
(c) 3.5 × 105 Pa
(d) None of these

Solution. Answer: (c) 3.5 × 105 Pa. n is constant: P2 = P1(V1/V2)(T2/T1) = 3.21 × 105 × (1/1.03) × (301/268) = 3.50 × 105 Pa.

Teacher's Note: Combined gas law with volume factor 1.03 and absolute temperatures 268 K and 301 K.

Exam Note: Volume up 3% means V2 = 1.03V1.

Question 40. A compressed cylinder of gas contains 1.50 × 103 g of N2 gas at a pressure of 2.0 × 107 Pa and a temperature of 17.1°C. What volume of gas has been released into the atmosphere if the final pressure in the cylinder is 1.80 × 105 Pa? Assume ideal behaviour and that the gas temperature is unchanged.
(a) 1260 L
(b) 126 L
(c) 12600 L
(d) 45 L

Solution. Answer: (a) 1260 L. n = 1500/28 = 53.6 mol. Cylinder volume = nRT/P = 53.6 × 8.314 × 290.25/(2.0 × 107) = 6.46 × 10-3 m3. Moles remaining = 53.6 × (1.8 × 105/2.0 × 107) = 0.482 mol, so released = 53.1 mol. At atmospheric pressure (1.013 × 105 Pa): V = 53.1 × 8.314 × 290.25/(1.013 × 105) = 1.26 m3 ≈ 1260 L.

Teacher's Note: Released gas volume is measured at 1 atm; find moles released from pressure drop at fixed V and T.

Exam Note: State the pressure at which released volume is measured.

Question 41. A high-altitude balloon is filled with 1.41 × 104 L of hydrogen at a temperature of 21°C and a pressure of 745 torr. What is the volume of the balloon at a height of 20 km, where the temperature is -48°C and the pressure is 63.1 torr?
(a) 1.274 × 105 L
(b) 1.66 × 105 L
(c) 1.66 × 104 L
(d) None of these

Solution. Answer: (a) 1.274 × 105 L. V2 = V1(P1/P2)(T2/T1) = 1.41 × 104 × (745/63.1) × (225/294) = 1.27 × 105 L.

Teacher's Note: Combined gas law; pressure drop dominates and enlarges volume about nine times.

Exam Note: Use 294 K and 225 K.

Question 42. The atmospheric pressure on Mars is 0.61 kPa. What is the pressure in mm Hg?
(a) 0.63
(b) 4.6
(c) 6.3
(d) 3.2

Solution. Answer: (b) 4.6. P = 0.61 kPa × 760 mm/101.325 kPa = 4.58 ≈ 4.6 mm Hg.

Teacher's Note: Use 101.325 kPa = 760 mm Hg.

Exam Note: Pressure conversion: kPa × 7.5 = mm Hg.

Question 43. The density of liquid gallium at 30°C is 6.095 g/mL. Because of its wide liquid range (30 to 2400°C), gallium could be used as a barometer fluid at high temperature. What height (in cm) of gallium will be supported when the mercury barometer reads 740 torr? (The density of mercury is 13.6 g/mL.)
(a) 322
(b) 285
(c) 165
(d) 210

Solution. Answer: (c) 165. Equal pressure: hGadGa = hHgdHg; h = 740 × 13.6/6.095 = 1651 mm = 165 cm.

Teacher's Note: Same pressure: height is inversely proportional to liquid density.

Exam Note: Convert mm to cm at the end.

Question 44. A weather balloon is inflated with helium. The balloon has a volume of 100 m3 and it must be inflated to a pressure of 0.10 atm. If 50 L gas cylinders of helium at a pressure of 100 atm are used, how many cylinders are needed? Assume that the temperature is constant.
(a) 2
(b) 3
(c) 4
(d) 1

Solution. Answer: (a) 2. PV needed = 0.10 atm × 100 m3 = 0.10 × 105 L = 104 atm L. Each cylinder supplies 100 × 50 = 5000 atm L. Cylinders needed = 104/5000 = 2.

Teacher's Note: At constant T, total PV of gas is conserved; 100 m3 = 105 L.

Exam Note: Convert m3 to litres: multiply by 1000.

Question 45. A balloon contains 14.0 L of air at 760 torr. What will be the volume of the balloon when it is taken to a depth of 10 ft. in a swimming pool? Assume that the temperature of the air and water are equal. (density: Hg = 13.6 g/mL.)
(a) 11.0
(b) 11.3
(c) 10
(d) 10.8

Solution. Answer: (d) 10.8. 10 ft = 304.8 cm of water = 3048 mm water = 3048/13.6 = 224 mm Hg. P2 = 760 + 224 = 984 torr. V2 = 14.0 × 760/984 = 10.8 L.

Teacher's Note: Pressure at depth = atmospheric + water column converted to mm Hg by density ratio.

Exam Note: Add atmospheric pressure to the water column.

Question 46. A 0.50 L container is occupied by nitrogen at a pressure of 800 torr and a temperature of 0°C. The container can only withstand a pressure of 3.0 atm. What is the highest temperature (°C) to which the container may be heated?
(a) 505
(b) 450
(c) 625
(d) 560

Solution. Answer: (a) 505. T2 = T1P2/P1 = 273 × (3.0 × 760)/800 = 778 K = 505°C.

Teacher's Note: Constant volume: convert 3.0 atm to 2280 torr and scale 273 K by the pressure ratio.

Exam Note: Convert the final kelvin value back to °C.

Question 47. Equal volumes of oxygen gas and a second gas weigh 1.00 and 2.375 grams respectively under the same experimental conditions. Which of the following is the unknown gas?
(a) NO
(b) SO2
(c) CS2
(d) CO

Solution. Answer: (c) CS2. Equal volumes at the same T and P have equal moles, so M(gas) = 32 × 2.375/1.00 = 76 g/mol, which is CS2 (12 + 64).

Teacher's Note: Avogadro's law: mass ratio equals molar mass ratio for equal volumes.

Exam Note: Multiply 32 by the mass ratio.

Question 48. A high altitude balloon contains 6.81 g of helium in 1.16 × 104 L at -23°C. Assuming ideal gas behaviour, how many grams of helium would have to be added to increase the pressure to 4.0 × 10-3 atm?
(a) 1.27
(b) 1.58
(c) 2.68
(d) 2.13

Solution. Answer: (d) 2.13. Total n required = PV/RT = (4.0 × 10-3 × 1.16 × 104)/(0.0821 × 250) = 2.26 mol = 9.05 g. Present: 6.81 g. Added = 9.05 - 6.81 = 2.2 g. The computed value 2.2 g is closest to option (d) 2.13 g, which is also the book's key. (Small difference due to rounding of R and T in the source.)

Teacher's Note: Find total moles needed at the new pressure, convert to grams, subtract helium already present.

Exam Note: Subtract the initial mass from the final mass.

Question 49. A 4.40 g piece of solid CO2 (dry ice) is allowed to sublime in a balloon. The final volume of the balloon is 1.00 L at 300 K. What is the pressure (atm) of the gas?
(a) 0.122
(b) 2.46
(c) 122
(d) 24.6

Solution. Answer: (b) 2.46. n = 4.40/44 = 0.100 mol. P = nRT/V = (0.100 × 0.0821 × 300)/1.00 = 2.46 atm.

Teacher's Note: Convert grams to moles with M = 44, then apply PV = nRT with R = 0.0821 L atm/(K mol).

Exam Note: Moles first, then PV = nRT.

Question 50. For a closed (not rigid) container containing n = 10 moles of an ideal gas fitted with movable, frictionless, weightless piston operating such that pressure of gas remains constant at 0.821 atm, which graph represents correct variation of log V vs log T where V is in litre and T in kelvin. (Graphs: (a) log V against log T, line at 45° through the origin; (b) log V against log T, line at 30°; (c) log V against log T, line at 45° but with a non-zero intercept; (d) log T against log V, line at 45°.)

Solution. Answer: (a). V = nRT/P = (10 × 0.0821/0.821)T = T, so log V = log T. This is a line of slope 1 (45°) with zero intercept on the log V versus log T graph: (a).

Teacher's Note: Take logs of V = (nR/P)T; here nR/P = 1, so the intercept log(nR/P) is zero.

Exam Note: Compute the intercept as well as the slope.

Question 51. The intercept on y-axis and slope of curve plotted between P/T vs. T. For an ideal gas having 10 moles in a closed rigid container of volume 8.21 L. (P = Pressure in atm and T = Temp. in K, log10 2 = 0.30) are respectively:
(a) 0.01, 0
(b) 0.1, 0
(c) 0.1, 1
(d) 10, 1

Solution. Answer: (b) 0.1, 0. At constant V and n, P/T = nR/V = (10 × 0.0821)/8.21 = 0.1 atm K-1, independent of T. The graph of P/T against T is a horizontal line: intercept 0.1, slope 0.

Teacher's Note: P/T equals nR/V, a constant, so the graph is horizontal with zero slope.

Exam Note: Constant ratio means slope 0 and intercept equal to the ratio.

Question 52. A He atom at 300 K is released from the surface of the earth to travel upwards, assuming that it undergoes no collision with other molecules, how high will it be before coming to the rest?
(a) 9.53 m
(b) 95.3 m
(c) 953 m
(d) 9.53 × 104 m

Solution. Answer: (d) 9.53 × 104 m. Kinetic energy of one atom = (3/2)kT is converted into potential energy mgh. m = 4 × 10-3/6.022 × 1023 = 6.64 × 10-27 kg. h = 1.5 × 1.38 × 10-23 × 300/(6.64 × 10-27 × 9.8) = 9.5 × 104 m.

Teacher's Note: Equate average kinetic energy (3/2)kT to mgh using the mass of a single He atom.

Exam Note: Use mass of one atom, not one mole.

Question 53. The density of gas A is twice that to B at the same temperature the molecular weight of gas B is twice that of A. The ratio of pressure of gas A and B will be:
(a) 1 : 6
(b) 1 : 1
(c) 4 : 1
(d) 1 : 4

Solution. Answer: (c) 4 : 1. P = dRT/M. PA/PB = (dA/dB) × (MB/MA) = 2 × 2 = 4, i.e. 4 : 1.

Teacher's Note: At fixed T, pressure is proportional to density divided by molar mass.

Exam Note: Both factors favour A: 2 times 2 gives 4.

Question 54. Two inflated balloons I and II (thin skin) having volume 600 mL and 1500 mL at 300 K are taken as shown in diagram (balloon I, 600 mL, is inside balloon II, 1500 mL). If maximum volume of inner and outer balloons are 800 mL and 1800 mL respectively then find the balloon which will burst first on gradual heating.
(a) inner balloon
(b) outer balloon
(c) both simultaneously
(d) unpredictable

Solution. Answer: (b) outer balloon. At constant pressure V is proportional to T. Inner balloon bursts when 600/300 = 800/T2, T2 = 400 K. Outer balloon bursts when 1500/300 = 1800/T2, T2 = 360 K. The outer balloon reaches its limit at the lower temperature (360 K), so it bursts first.

Teacher's Note: Find the burst temperature of each balloon from Charles' law; the lower temperature bursts first.

Exam Note: Compare burst temperatures: 360 K against 400 K.

Question 55. An open flask containing air is heated from 300 K to 500 K. What percentage of air will be escaped to the atmosphere, if pressure is keeping constant?
(a) 80
(b) 40
(c) 60
(d) 20

Solution. Answer: (b) 40. The flask volume V is fixed at constant pressure, so n is inversely proportional to T. Fraction escaped = 1 - 300/500 = 0.4, i.e. 40%. (Equivalently, the air would expand to 5V/3; the portion beyond V, 2V/3, divided by 5V/3 is 40%.)

Teacher's Note: Open flask at constant P and V: n is proportional to 1/T, so moles lost = 1 - T1/T2.

Exam Note: Percentage lost is relative to the amount at 500 K.

Question 56. The value of universal gas constant R depends on:
(a) temperature of gas
(b) volume of gas
(c) number of moles of gas
(d) units of volume and pressure

Solution. Answer: (d) units of volume and pressure. R is a universal constant; its numerical value depends only on the units used for pressure and volume (and energy), e.g. 0.0821 L atm, 8.314 J.

Teacher's Note: R does not depend on the gas or state; only the unit system changes its number.

Exam Note: Value changes only with units.

Question 57. A manometer attached to a flask contains with ammonia gas have no difference in mercury level initially as shown in diagram (Patm = 76 cm Hg). After sparking into the flask, ammonia is partially dissociated as 2NH3(g) → N2(g) + 3H2(g) now it have difference of 6 cm in mercury level in two columns, what is partial pressure of H2(g) at equilibrium?
(a) 9 cm Hg
(b) 18 cm Hg
(c) 27 cm Hg
(d) None of these

Solution. Answer: (a) 9 cm Hg. Initial pressure of NH3 = 76 cm Hg. At equilibrium: NH3 = 76 - 2x, N2 = x, H2 = 3x. Total = 76 + 2x = 76 + 6 = 82, so x = 3 cm Hg. p(H2) = 3x = 9 cm Hg.

Teacher's Note: Pressure rise equals the manometer difference (6 cm); each dissociation of 2NH3 adds 2 units.

Exam Note: Total pressure increase is 2x, and H2 is 3x.

Question 58. An ideal gas is collected by downward displacement of water. Select the correct expression for Pgas according to the diagram [dHg = 13.6 g/cm3]: (the gas is trapped in an inverted tube; water inside the tube stands h cm above the water level outside; water d = 1 g/cm3.)
(a) Pgas = Patm - [aq. Tension + h/13.6]
(b) Pgas = Patm - hdg
(c) Pgas = Patm - aq. Tension + h/13.6
(d) none of these

Solution. Answer: (a) Pgas = Patm - [aq. Tension + h/13.6]. The water column of h cm is equivalent to h/13.6 cm Hg and pulls the pressure down. The total gas pressure inside = Patm - h/13.6; this includes water vapour, so the pressure of dry gas = Patm - [aq. tension + h/13.6].

Teacher's Note: Convert the water column to mm Hg using density ratio 13.6, then subtract the aqueous tension for dry gas.

Exam Note: Dry gas pressure excludes aqueous tension.

Question 59. A bubble of gas released at the bottom of a lake increases to four times its original volume when it reaches the surface. Assuming that atmospheric pressure is equivalent to the pressure exerted by a column of water 10 m high, what is the depth of the lake?
(a) 20 m
(b) 10 m
(c) 30 m
(d) 40 m

Solution. Answer: (c) 30 m. P1V1 = P2V2: P1 = 4P2 = 4 × 10 m = 40 m of water. P1 = atmosphere + depth = 10 + d, so d = 30 m.

Teacher's Note: Pressure at bottom = atmospheric pressure + depth; atmosphere is worth 10 m of water.

Exam Note: Subtract the 10 m atmospheric equivalent.

Question 60. Calculate the number of moles of gas present in the container of volume 10 L at 300 K. If the manometer containing glycerin shows 5 m difference in level as shown in diagram (Patm = 1 atm; gas pressure is higher than atmospheric). (Given: dglycerin = 2.72 g/mL; dmercury = 13.6 g/mL)
(a) 0.94 mole
(b) 0.49 mole
(c) 0.64 mole
(d) none of these

Solution. Answer: (a) 0.94 mole. 5 m glycerin = 5 × 2.72/13.6 = 1 m Hg = 1000 mm Hg. Pgas = 760 + 1000 = 1760 mm Hg = 1760/760 = 2.316 atm. n = PV/RT = (2.316 × 10)/(0.0821 × 300) = 0.94 mol.

Teacher's Note: Convert the glycerin column to mm Hg using density ratio, add atmospheric pressure, then PV = nRT.

Exam Note: Gas pressure = atmosphere plus the column.

Question 61. A rigid vessel of volume 0.50 m3 containing H2 at 20.5°C and a pressure of 611 × 103 Pa is connected to a second rigid vessel of volume 0.75 m3 containing Ar at 31.2°C at a pressure of 433 × 103 Pa. A valve separating the two vessels is opened and both are cooled to a temperature of 14.5°C. What is the final pressure in the vessels?
(a) 2 × 105
(b) 3.22 × 105 Pa
(c) 4840 Pa
(d) 4.84 × 105 Pa

Solution. Answer: (d) 4.84 × 105 Pa. n(H2) = (611 × 103 × 0.50)/(8.314 × 293.65) = 125.1 mol; n(Ar) = (433 × 103 × 0.75)/(8.314 × 304.35) = 128.3 mol. Total = 253.4 mol in 1.25 m3 at 287.65 K. P = nRT/V = 253.4 × 8.314 × 287.65/1.25 = 4.85 × 105 Pa.

Teacher's Note: Find moles in each vessel separately, add them, then apply PV = nRT to the combined volume.

Exam Note: Use SI units: m3, Pa and R = 8.314.

Question 62. Two glass bulbs A and B at same temperature are connected by a very small tube having a stop-corck. Bulb A has a volume of 100 cm3 and contained the gas while bulb B was empty. On opening the stop-corck, the pressure fell down to 20%. The volume of the bulb B is:
(a) 100 cm3
(b) 200 cm3
(c) 250 cm3
(d) 400 cm3

Solution. Answer: (d) 400 cm3. Boyle's law: P × 100 = 0.20P × (100 + VB), so 100 + VB = 500 and VB = 400 cm3.

Teacher's Note: Final volume is five times the initial; bulb B supplies the extra four parts.

Exam Note: Subtract A's volume from total.

Question 63. A mixture of C2H2 and C3H8 occupied a certain volume at 80 mm Hg. The mixture was completely burnt to CO2 and H2O(l). When the pressure of CO2 was found to be 230 mm Hg at the same temperature and volume, the mole fraction of C3H8 in the mixture is:
(a) 0.125
(b) 0.875
(c) 0.6
(d) 0.8

Solution. Answer: (b) 0.875. Let partial pressures be a (C2H2) and b (C3H8): a + b = 80. CO2 produced: 2a + 3b = 230. Then 160 + b = 230, b = 70, a = 10. Mole fraction of C3H8 = 70/80 = 0.875.

Teacher's Note: At constant V and T pressures are proportional to moles; C2H2 gives 2 CO2, C3H8 gives 3.

Exam Note: Two simultaneous equations in partial pressures.

Question 64. The total pressure of a mixture of oxygen and hydrogen is 1.0 atm. The mixture is ignited and the water is removed. The remaining gas is pure hydrogen and exerts a pressure of 0.40 atm when measured at the same values of T and V as the original mixture. What was the composition of the original mixture in mole per cent?
(a) xO2 = 0.2; xH2 = 0.8
(b) xO2 = 0.4; xH2 = 0.6
(c) xO2 = 0.6; xH2 = 0.4
(d) xO2 = 0.8; xH2 = 0.2

Solution. Answer: (a) xO2 = 0.2; xH2 = 0.8. 2H2 + O2 → 2H2O. Let initial pressures be p(O2) = x and p(H2) = y: x + y = 1.0. Remaining H2 = y - 2x = 0.40, so 1 - 3x = 0.40, x = 0.2, y = 0.8. Composition: 20% O2, 80% H2.

Teacher's Note: Oxygen consumes twice its moles of hydrogen; leftover H2 is y - 2x.

Exam Note: Use 2 : 1 reacting ratio of H2 to O2.

Question 65. Two closed vessels A and B of equal volume 8.21 L are connected by a narrow tube of negligible volume with open valve. The left hand side container is found to contain 3 mole CO2 and 2 mole of He at 400 K, what is the partial pressure of He in vessel B at 500 K?
(a) 2.4 atm
(b) 8 atm
(c) 12 atm
(d) None of these

Solution. Answer: (b) 8 atm. In A (400 K, 8.21 L): total n = 5 mol, so P = nRT/V = 5 × 0.0821 × 400/8.21 = 20 atm. The open valve keeps the same total pressure in B, and the composition is the same (He mole fraction 2/5). Partial pressure of He = (2/5) × 20 = 8 atm.

Teacher's Note: Connected vessels share one pressure and one composition, regardless of temperature.

Exam Note: Pressure is equal in both vessels; use A's data.

Question 66. At STP a container has 1 mole of He, 2 mole Ne, 3 mole O2 and 4 mole N2. Without changing total pressure if 2 mole of O2 is removed, the partial pressure of O2 will be decreased by:
(a) 26%
(b) 40%
(c) 58.33%
(d) 66.66%

Solution. Answer: (c) 58.33%. Initially x(O2) = 3/10, so p(O2) = 0.3PT. After removing 2 mol O2: total = 8 mol, O2 = 1 mol, p(O2) = PT/8 = 0.125PT. Decrease = (0.3 - 0.125)/0.3 × 100 = 58.33%.

Teacher's Note: Total pressure is fixed, so partial pressure follows the mole fraction: 3/10 falls to 1/8.

Exam Note: Percentage is relative to the original partial pressure.

Question 67. A 821 mL N2(g) was collected over liquid water at 300 K and 1 atm. If vapour pressure of H2O is 30 torr then moles of N2(g) in moist gas mixture is:
(a) 0.39
(b) 0.032
(c) 0.96
(d) 0.0013

Solution. Answer: (b) 0.032. P(N2) = 1 - 30/760 = 0.9605 atm. n = PV/RT = (0.9605 × 0.821)/(0.0821 × 300) = 0.032 mol.

Teacher's Note: Subtract the water vapour pressure (30/760 atm) to get the dry-gas pressure.

Exam Note: Dry gas pressure = total minus aqueous tension.

Question 68. Let p and ps be the partial pressure of H2O(g) and vapour pressure of H2O(l) respectively. Then the % relative humidity is given by:
(a) (ps + p)/ps × 100
(b) (p/ps) × 100
(c) (ps/p) × 100
(d) (p + ps) × 100

Solution. Answer: (b) (p/ps) × 100. % relative humidity = (partial pressure of H2O vapour/vapour pressure of water at that temperature) × 100 = (p/ps) × 100.

Teacher's Note: Relative humidity compares actual water vapour pressure with the saturation value.

Exam Note: Actual over saturated, times 100.

Question 69. The vapour pressure of water at 80°C is 355 mm of Hg. 1 L vessel contains O2 at 80°C, saturated with water the total pressure being 760 mm of Hg. The contents of the vessel were pumped into 0.3 L vessel at the same temperature. What is the partial pressure of O2?
(a) 1350 Hg
(b) 2178.3 Hg
(c) 121.5 Hg
(d) 355 Hg

Solution. Answer: (a) 1350 Hg. In the 1 L vessel p(O2) = 760 - 355 = 405 mm Hg. On compression to 0.3 L the excess water vapour condenses (vapour pressure stays 355 mm), while O2 obeys Boyle's law: p(O2) = 405 × 1/0.3 = 1350 mm Hg.

Teacher's Note: Water vapour stays at its vapour pressure (extra condenses); only O2 is compressed by Boyle's law.

Exam Note: Vapour pressure is fixed, so O2 alone is compressed.

Question 70. Which of the following gas mixture is not applicable for Dalton's law of partial pressure?
(a) SO2 and Cl2
(b) CO2 and N2
(c) CO and CO2
(d) CO and N2

Solution. Answer: (a) SO2 and Cl2. Dalton's law holds only for non-reacting gases. SO2 and Cl2 react to form SO2Cl2, so Dalton's law is not applicable to this mixture.

Teacher's Note: Dalton's law needs gases that do not react chemically with one another.

Exam Note: Look for the pair that reacts.

Question 71. Equal masses of methane and oxygen are mixed in an empty container at 25°C. The fraction of the total pressure exerted by oxygen is:
(a) 2/3
(b) (1/3) × (273/298)
(c) 1/3
(d) 1/2

Solution. Answer: (c) 1/3. For mass w: n(CH4) = w/16, n(O2) = w/32. Fraction by O2 = (1/32)/(1/16 + 1/32) = 1/3.

Teacher's Note: Pressure fraction equals mole fraction; equal masses mean moles are inversely proportional to molar masses.

Exam Note: Temperature cancels out.

Question 72. A box of 1 L capacity is divided into two equal compartments by a thin partition which are filled with 2 g H2 and 16 g CH4 respectively. The pressure in each compartment is recorded as P atm. The total pressure when partition is removed will be:
(a) P
(b) 2P
(c) P/2
(d) P/4

Solution. Answer: (a) P. Each compartment (0.5 L) holds 1 mol (2 g H2 = 1 mol; 16 g CH4 = 1 mol) at pressure P. After removing the partition, 2 mol occupy 1 L at the same temperature: Ptotal = 2RT/1 = RT/0.5 = P.

Teacher's Note: Moles double while volume doubles, so total pressure equals the original pressure.

Exam Note: Compare n/V before and after.

Question 73. If 10-4 dm3 of water is introduced into a 1.0 dm3 flask at 300 K, how many moles of water are in the vapour phase when equilibrium is established? (Given: Vapour pressure of H2O at 300 K is 3170 Pa; R = 8.314 J K-1 mol-1)
(a) 1.27 × 10-3 mole
(b) 5.56 × 10-3 mole
(c) 1.53 × 10-2 mole
(d) 4.46 × 10-2 mole

Solution. Answer: (a) 1.27 × 10-3 mole. Water introduced = 0.1 mL = 0.1 g = 5.56 × 10-3 mol. If it all vaporised, n would exceed the equilibrium value. n(vapour) = PV/RT = (3170 × 1.0 × 10-3)/(8.314 × 300) = 1.27 × 10-3 mol, which is less than 5.56 × 10-3 mol, so only this much is in the vapour phase.

Teacher's Note: Compare moles needed to saturate the flask with moles of water added; the smaller value is in vapour.

Exam Note: Use V = 1.0 dm3 = 10-3 m3 with Pa.

Question 74. At room temperature Dalton's law of partial pressure is not applicable to:
(a) H2 and N2 mixture
(b) H2 and Cl2 mixture
(c) H2 and CO2 mixture
(d) none

Solution. Answer: (b) H2 and Cl2 mixture. As given in the book's key: (b). H2 and Cl2 react (to form HCl), so Dalton's law, which requires non-reacting gases, is not applicable.

Teacher's Note: Dalton's law fails when gases react; H2 and Cl2 combine to give HCl.

Exam Note: Reacting gases do not obey Dalton's law.

Question 75. 56 g of nitrogen and 96 g of oxygen are mixed isothermally and at a total pressure of 10 atm. The partial pressures of oxygen and nitrogen (in atm) are respectively:
(a) 4, 6
(b) 5, 5
(c) 2, 8
(d) 6, 4

Solution. Answer: (d) 6, 4. n(N2) = 56/28 = 2 mol; n(O2) = 96/32 = 3 mol. Mole fractions: O2 = 3/5, N2 = 2/5. Partial pressures: O2 = 0.6 × 10 = 6 atm, N2 = 0.4 × 10 = 4 atm.

Teacher's Note: Partial pressure = mole fraction × total pressure; watch the order (oxygen first).

Exam Note: Convert masses to moles first.

Question 76. The closed containers of the same capacity and at the same temperature are filled with 44 g of H2 in one and 44 g of CO2 in the other. If the pressure of carbon dioxide in the second container is 1 atm. That of hydrogen in the first container would be:
(a) 1 atm
(b) 10 atm
(c) 22 atm
(d) 44 atm

Solution. Answer: (c) 22 atm. n(CO2) = 44/44 = 1 mol; n(H2) = 44/2 = 22 mol. At the same V and T, P is proportional to n: P(H2) = 22 × 1 atm = 22 atm.

Teacher's Note: Same V and T: pressure is proportional to moles; 44 g H2 is 22 mol.

Exam Note: H2 has molar mass 2, not 44.

Question 77. A jar contains a gas and a few drops of water. The pressure in the jar is 830 mm of Hg. The temperature of the jar is reduced by 1%. The vapour pressure of water at two temperatures are 30 and 25 mm of Hg. Calculate the new pressure in jar.
(a) 792 mm of Hg
(b) 817 mm of Hg
(c) 800 mm of Hg
(d) 840 mm of Hg

Solution. Answer: (b) 817 mm of Hg. Dry gas pressure initially = 830 - 30 = 800 mm Hg. After cooling by 1% (T2 = 0.99T1) at constant volume: P(dry gas) = 800 × 0.99 = 792 mm Hg. New total pressure = 792 + 25 = 817 mm Hg.

Teacher's Note: Only the dry gas obeys P ∝ T; add the new vapour pressure of water afterwards.

Exam Note: Scale the dry gas, then add the new water vapour pressure.

Question 78. O2 and SO2 gases are filled in ratio of 1 : 3 by moles in a closed container of 3 L at temperature of 27°C. The partial pressure of O2 is 0.60 atm, the concentration of SO2 would be
(a) 0.36
(b) 0.036
(c) 3.6
(d) 36

Solution. Answer: (b) 0.036. Taking the ratio 1 : 3 as the book does (n(O2) = x/32 and n(SO2) = 3x/64, i.e. by mass): x(O2) = (x/32)/(x/32 + 3x/64) = 0.4, so Ptotal = 0.60/0.4 = 1.5 atm and p(SO2) = 0.9 atm. [SO2] = p/RT = 0.9/(0.0821 × 300) = 0.036 mol/L. (If 1 : 3 really meant moles, [SO2] would be 0.073 mol/L, which is not an option; the printed wording 'by moles' appears to be a misprint for 'by mass'.)

Teacher's Note: Concentration of a gas is p/RT; the mole ratio fixes the partial pressure of SO2.

Exam Note: Check whether the ratio is by moles or by mass.

Question 79. A gaseous mixture contains three gases A, B and C with a total number of moles of 10 and total pressure of 10 atm. The partial pressure of A and B are 3 atm and 1 atm respectively and if C has molecular weight of 2 g/mol. Then, the weight of C present in the mixture will be:
(a) 8 g
(b) 12 g
(c) 3 g
(d) 6 g

Solution. Answer: (b) 12 g. p(C) = 10 - 3 - 1 = 6 atm. Mole fraction of C = 6/10, so n(C) = 6 mol. Weight = 6 × 2 = 12 g.

Teacher's Note: Partial pressures add up to total; mole fraction gives moles when total moles are known.

Exam Note: Subtract the known partial pressures first.

Question 80. A rigid container containing 5 mole H2 gas at same pressure and temperature. The gas has been allowed to escape by simple process from the container due to which pressure of the gas becomes half of its initial pressure and temperature become (2/3)rd of its initial. The mass of gas remaining is:
(a) 7.5 g
(b) 1.5 g
(c) 2.5 g
(d) 3.5 g

Solution. Answer: (a) 7.5 g. Rigid container: n ∝ P/T. n2 = 5 × (1/2)/(2/3) = 5 × 0.75 = 3.75 mol. Mass = 3.75 × 2 = 7.5 g.

Teacher's Note: Constant volume gives n proportional to P/T; ratio = 0.5 divided by 2/3.

Exam Note: Mass = moles × 2 g/mol for H2.

Question 81. Pressure of 1 g ideal gas X at 300 K is 2 atm. When 2 g of another gas Y is introduced in the same vessel at same temperature, the pressure become 3 atm then correct relationship between molar mass of X and Y is:
(a) MY = 2MX
(b) MY = 4MX
(c) MX = 4MY
(d) None of these

Solution. Answer: (b) MY = 4MX. Added pressure from Y = 3 - 2 = 1 atm. P ∝ n: nX : nY = 2 : 1, i.e. (1/MX) : (2/MY) = 2 : 1, so MY = 4MX.

Teacher's Note: At fixed V and T, partial pressure is proportional to moles; moles = mass/M.

Exam Note: Pressure due to Y alone is 1 atm.

Question 82. Dry ice is solid carbon dioxide. A 0.050 g sample of dry ice is placed in an evacuated 4.6 L vessel at 30°C. Calculate the pressure inside the vessel after all the dry ice has been converted to CO2 gas.
(a) 6.14 atm
(b) 0.614 atm
(c) 0.0614 atm
(d) 6.14 × 10-3 atm

Solution. Answer: (d) 6.14 × 10-3 atm. n = 0.050/44 = 1.136 × 10-3 mol. P = nRT/V = (1.136 × 10-3 × 0.0821 × 303)/4.6 = 6.14 × 10-3 atm.

Teacher's Note: Small sample: moles about 10-3, so pressure is of the order of 10-3 atm.

Exam Note: Check the power of ten against the options.

Question 83. A mixture of helium and neon gases is collected over water at 28.0°C and 745 mmHg. If the partial pressure of helium is 368 mmHg, what is the partial pressure of neon? (Vapour pressure of water at 28°C = 28.3 mmHg)
(a) 348.7 mmHg
(b) 377 mmHg
(c) 384.7 mmHg
(d) none of these

Solution. Answer: (a) 348.7 mmHg. P(total) = p(He) + p(Ne) + p(H2O): p(Ne) = 745 - 368 - 28.3 = 348.7 mmHg.

Teacher's Note: Gas collected over water: subtract both helium and the aqueous tension from the total.

Exam Note: Remember to subtract water vapour pressure.

Question 84. Consider the following apparatus (two bulbs joined by a closed valve: left bulb He, 1.2 L at 0.63 atm; right bulb Ne, 3.4 L at 2.8 atm). Calculate the partial pressure of helium after the opening valve. The temperature remains constant at 16°C.
(a) 0.164 atm
(b) 1.64 atm
(c) 0.328 atm
(d) 1 atm

Solution. Answer: (a) 0.164 atm. He expands into the total volume 1.2 + 3.4 = 4.6 L: p(He) = 0.63 × 1.2/4.6 = 0.164 atm.

Teacher's Note: Each gas expands independently into the full volume (Boyle's law).

Exam Note: Total volume is the sum of the two bulbs.

Question 85. Oxygen gas generated by the decomposition of potassium chlorate is collected over water. The volume of oxygen collected at 24°C and atmospheric pressure of 760 mmHg is 128 mL. Calculate the mass of oxygen gas obtained. The pressure of the water vapour at 24°C is 22.4 mm Hg.
(a) 1.36 g
(b) 1.52 g
(c) 0.163 g
(d) 1.63 g

Solution. Answer: (c) 0.163 g. p(O2) = 760 - 22.4 = 737.6 mm Hg = 0.9705 atm. n = PV/RT = (0.9705 × 0.128)/(0.0821 × 297) = 5.09 × 10-3 mol. Mass = 5.09 × 10-3 × 32 = 0.163 g.

Teacher's Note: Dry O2 pressure excludes water vapour; then PV = nRT and multiply by 32.

Exam Note: Convert 128 mL to 0.128 L.

Question 86. The quantity PV/(kBT) represents the (kB: Boltzmann constant)
(a) number of particles of the gas
(b) mass of the gas
(c) number of moles of the gas
(d) translation energy of the gas

Solution. Answer: (a) number of particles of the gas. PV = nRT = N kBT (R = NAkB), so PV/(kBT) = N, the number of particles.

Teacher's Note: Using kB in place of R converts moles into number of particles.

Exam Note: PV = N kBT.

Question 87. Which of the following statements about kinetic energy (K.E.) is true?
(a) All objects moving with the same velocity have the same K.E.
(b) The K.E. of a body will quadruple if its velocity doubles
(c) As the velocity of a body increases, its K.E. decreases
(d) The K.E. of a body is independent of its mass

Solution. Answer: (b) The K.E. of a body will quadruple if its velocity doubles. K.E. = (1/2)mv2 depends on mass and is proportional to v2; doubling v quadruples K.E.

Teacher's Note: K.E. is proportional to the square of velocity and to mass.

Exam Note: Square dependence on velocity.

Question 88. The Ne atom has 10 times the mass of H2. Which of the following statements is true? I. At 25°C they both have the same kinetic energy. II. Ten moles of H2 would have the same volume as 1 mole of Ne at same temp. and pr. III. One mole of Ne exerts the same pressure as one mole of H2 at STP. IV. A H2 molecule travels 10 times faster than Ne atom at same temperature. V. At STP one litre of Ne has 10 times the density of 1 litre of H2.
(a) II, IV, V
(b) I, III, V
(c) I, II, III
(d) I, II

Solution. Answer: (b) I, III, V. I true: average K.E. = (3/2)kT depends only on T. II false: equal moles give equal volumes, so 10 mol H2 has 10 times the volume of 1 mol Ne. III true: same n, V and T give same P. IV false: urms ∝ 1/√M, so H2 is √10 ≈ 3.2 times faster. V true: d ∝ M. Correct: I, III, V.

Teacher's Note: Average K.E. depends only on T; speed varies as 1/√M, density as M at the same T, P.

Exam Note: Speed ratio is √10, not 10.

Question 89. Which of the following is NOT a postulate of the kinetic molecular theory of gases?
(a) The molecules possess a volume that is negligibly small compared to the container
(b) The pressure and volume of a gas are inversely related
(c) Gases consist of discrete particles that are in constant chaotic motion
(d) The average kinetic energy of the molecules is directly proportional to the temperature

Solution. Answer: (b) The pressure and volume of a gas are inversely related. The inverse relation of pressure and volume is Boyle's law, an experimental gas law that follows from the theory; it is not a postulate of kinetic theory.

Teacher's Note: Postulates describe the molecular model; Boyle's law is an experimental result derived from it.

Exam Note: Gas laws are consequences, not postulates.

Question 90. Which one of the following relationships when graphed does not give a straight line for helium gas? I. K.E. and T at constant pressure and volume II. P v/s V at constant temperature for a constant mass III. V v/s 1/T at constant pressure for a constant mass
(a) II
(b) II and III
(c) III
(d) I

Solution. Answer: (b) II and III. I: K.E. = (3/2)nRT is linear in T. II: P v/s V at constant T is a rectangular hyperbola (PV = k). III: V = (nR/P)T is linear in T, so V against 1/T is a hyperbola. Hence II and III do not give straight lines.

Teacher's Note: A plot is straight only if the two plotted quantities are proportional.

Exam Note: V versus 1/T is not linear.

Question 91. Consider three one-litre flasks labeled A, B and C filled with the gases NO, NO2 and N2O3 respectively, each at 1 atm and 273 K. In which flask do the molecules have the highest average kinetic energy?
(a) Flask C
(b) All are the same
(c) Flask A
(d) None

Solution. Answer: (b) All are the same. Average kinetic energy per molecule = (3/2)kT depends only on temperature, which is the same (273 K) in all flasks.

Teacher's Note: Average K.E. depends only on temperature, not on the gas or its molar mass.

Exam Note: Same temperature means same average K.E.

Question 92. Which of the following statements is false?
(a) The product of pressure and volume of fixed amount of a gas is independent of temperature.
(b) Molecules of different gases have the same kinetic energy at a given temperature.
(c) The gas equation is not valid at high pressure and low temperature constant.
(d) The gas constant per molecule is known as Boltzmann's constant.

Solution. Answer: (a) The product of pressure and volume of fixed amount of a gas is independent of temperature.. PV = nRT, so for a fixed amount of gas PV is proportional to T and depends on temperature (it is constant only at constant T). Statement (a) is false.

Teacher's Note: PV equals nRT, so it changes with temperature; Boyle's PV = constant needs constant T.

Exam Note: Boyle's constant requires constant temperature.

Question 93. Which is not correct in terms of kinetic theory of gases?
(a) Gaseous particles are considered as point mass.
(b) The molecules are in random motion.
(c) When molecules collide, they lose energy.
(d) When the gas is heated, the molecules moves faster.

Solution. Answer: (c) When molecules collide, they lose energy.. Kinetic theory assumes perfectly elastic collisions, so no kinetic energy is lost on collision. Statement (c) is not correct.

Teacher's Note: Elastic collisions conserve total kinetic energy, which is why pressure stays steady at constant T.

Exam Note: Collisions are perfectly elastic.

Question 94. Two flasks A and B have equal volumes. A is maintained at 300 K and B at 600 K, while A contains H2 gas, B has an equal mass of CO2 gas. Find the ratio of total K.E. of gases in flask A to that of B.
(a) 1 : 2
(b) 11 : 1
(c) 33 : 2
(d) 55 : 7

Solution. Answer: (b) 11 : 1. Total K.E. = (3/2)nRT. For equal mass w: n(H2) = w/2, n(CO2) = w/44. Ratio = (w/2 × 300)/(w/44 × 600) = 150/(13.64) = 11 : 1.

Teacher's Note: Total kinetic energy is proportional to n × T; equal masses give mole ratio 22 : 1.

Exam Note: Equal masses mean unequal moles.

Question 95. Kinetic energy and pressure of a gas of unit volume are related as:
(a) P = (2/3)E
(b) P = (3/2)E
(c) P = E/2
(d) P = 2E

Solution. Answer: (a) P = (2/3)E. From kinetic theory PV = (1/3)mNu2 = (2/3) × (translational K.E. of the gas, E = (1/2)mNu2). For unit volume (V = 1), P = (2/3)E.

Teacher's Note: PV = (2/3) times translational kinetic energy; put V = 1.

Exam Note: Memorise PV = (2/3)E.

Question 96. Two flasks A and B of equal volumes maintained at temperature 300 K and 700 K contain equal mass of He(g) and N2(g) respectively. What is the ratio of translational kinetic energy of gas in flask A to that of flask B?
(a) 1 : 3
(b) 3 : 1
(c) 3 : 49
(d) None of these

Solution. Answer: (b) 3 : 1. Total translational K.E. = (3/2)nRT. n(He) = w/4, n(N2) = w/28. Ratio = (w/4 × 300)/(w/28 × 700) = 75/25 = 3 : 1.

Teacher's Note: Equal masses: He has seven times as many moles as N2; multiply by the temperature ratio 300/700.

Exam Note: Energy ratio = n × T ratio.

Question 97. Which occurs when a substance X is converted from liquid to vapour phase at the standard boiling point? I. Potential energy of the system decreases II. The distance between molecules increases III. The average kinetic energy of the molecules in both phases are equal
(a) I only
(b) II only
(c) III only
(d) II and III only

Solution. Answer: (d) II and III only. On vaporisation, molecules move apart (II true) so potential energy increases, not decreases (I false). Temperature is constant at the boiling point, so average kinetic energy is the same in both phases (III true). Answer: II and III.

Teacher's Note: Heat supplied at the boiling point raises potential energy, not kinetic energy.

Exam Note: Boiling: constant T, rising potential energy.

Question 98. A mixture of Ne and Ar at 250 K has a total K.E. = 3 kJ in a closed vessel, the total mass of Ne and Ar is 30 g. Find mass % of Ne in gaseous mixture at 250 K.
(a) 61.63
(b) 38.37
(c) 50%
(d) 28.3

Solution. Answer: (d) 28.3. K.E. = (3/2)nRT: n = 2 × 3000/(3 × 8.314 × 250) = 0.962 mol. Let moles of Ne = x: 20x + 40(0.962 - x) = 30, so 38.5 - 20x = 30, x = 0.424 mol. Mass of Ne = 8.5 g. Mass % Ne = 8.5/30 × 100 = 28.3%.

Teacher's Note: Get total moles from K.E. = (3/2)nRT, then solve for Ne using total mass.

Exam Note: Two equations: total moles and total mass.

Question 99. In two vessels of 1 litre each at the same temperature 1 g of H2 and 1 g of CH4 are taken, for these:
(a) Vrms values will be same
(b) Kinetic energy per mol will be same
(c) Total kinetic energy will be same
(d) Pressure will be same

Solution. Answer: (b) Kinetic energy per mol will be same. K.E. per mole = (3/2)RT depends only on temperature, so it is the same. Vrms depends on M, total K.E. on the number of moles, and pressure on the number of moles, all of which differ for 1 g of each gas.

Teacher's Note: Only quantities that depend on T alone, such as K.E. per mole, are equal.

Exam Note: Same T gives same molar K.E.

Question 100. Four particles have speed 2,3,4 and 5 cm/s respectively. Their rms speed is:
(a) 3.5 cm/s
(b) (27/2) cm/s
(c) √54 cm/s
(d) (√54/2) cm/s

Solution. Answer: (d) (√54/2) cm/s. urms = √[(22 + 32 + 42 + 52)/4] = √(54/4) = √54/2 = 3.67 cm/s.

Teacher's Note: rms speed is the square root of the mean of squares.

Exam Note: Divide the sum of squares by 4 before the root.

Question 101. A gaseous mixture contains 4 molecules with a velocity of 6 cm sec-1, 5 molecules with a velocity of 2 cm sec-1 and 10 molecules with a velocity of 3 cm sec-1 of the gas. What is the RMS velocity of the gas:
(a) 2.5 cm sec-1
(b) 1.9 cm sec-1
(c) 3.6 cm sec-1
(d) 4.6 cm sec-1

Solution. Answer: (c) 3.6 cm sec-1. urms = √[(4 × 36 + 5 × 4 + 10 × 9)/19] = √(254/19) = √13.37 = 3.66 ≈ 3.6 cm/s.

Teacher's Note: Weight each squared speed by the number of molecules before averaging.

Exam Note: Total molecules are 19.

Question 102. The ratio between the root mean square velocity of H2 at 50 K and that of O2 at 800 K is:
(a) 4
(b) 2
(c) 1
(d) 1/4

Solution. Answer: (c) 1. urms ∝ √(T/M). Ratio = √[(50/2)/(800/32)] = √(25/25) = 1.

Teacher's Note: Compare T/M for each gas: both equal 25.

Exam Note: Ratio of √(T/M) values.

Question 103. If C1, C2, C3... represent the speeds of n1, n2, n3... molecules respectively, then the root mean square speed will be:
(a) √[(n1C12 + n2C22 + n3C32 + ...)/(n1 + n2 + n3 + ...)]
(b) √[(n1 + n2 + n3 + ...)2/(n1C12 + n2C22 + n3C32 + ...)]
(c) √[(n1C1)/n1 + (n2C2)/n2 + (n3C3)/n3]
(d) √[(n1C1 + n2C2 + n3C3 + ...)2/(n1 + n2 + n3 + ...)]

Solution. Answer: (a) √[(n1C12 + n2C22 + n3C32 + ...)/(n1 + n2 + n3 + ...)]. rms speed is the square root of the mean of the squares of the speeds: urms = √[ΣniCi2/Σni], option (a).

Teacher's Note: Square each speed, weight by number of molecules, average, then take the root.

Exam Note: Root of mean of squares.

Question 104. The root mean square velocity of hydrogen is √5 times than that of nitrogen. If T is the temperature of the gas, then:
(a) TH2 = TN2
(b) TH2 > TN2
(c) TH2 < TN2
(d) TH2 = √7 TN2

Solution. Answer: (c) TH2 < TN2. uH/uN = √[(TH/2)/(TN/28)] = √(14TH/TN) = √5. So TH/TN = 5/14, i.e. TH2 < TN2.

Teacher's Note: At equal temperature H2 would be √14 times faster; being only √5 times faster means it is cooler.

Exam Note: Compare with the equal-T ratio √14.

Question 105. At a definite temperature (T), the distribution of velocities is given by the curve (fraction of molecules versus velocity, a single-peaked curve with points A at the peak, B just to its right and C further right). The curve that indicates that the velocities corresponding to points A, B and C are:
(a) most probable, average and root mean square
(b) average, root mean square and most probable
(c) root mean square, average and most probable
(d) most probable, root mean square and average

Solution. Answer: (a) most probable, average and root mean square. Since ump < uav < urms (ratio 1 : 1.13 : 1.22), moving along the velocity axis from the peak the points are most probable (A), average (B) and root mean square (C).

Teacher's Note: Order of speeds: most probable is lowest (peak), then average, then rms.

Exam Note: Peak = most probable speed.

Question 106. The most probable speed of 8 g of H2 200 ms-1 average kinetic energy (neglect rotational and vibrational energy) of H2 gas is:
(a) 480 J
(b) 240 J
(c) 120 J
(d) none of these

Solution. Answer: (b) 240 J. ump2 = 2RT/M, so RT = Mump2/2 = (2 × 10-3 × 2002)/2 = 40 J mol-1. n = 8/2 = 4 mol. K.E. = (3/2)nRT = 1.5 × 4 × 40 = 240 J.

Teacher's Note: Use ump = √(2RT/M) to find RT, then total K.E. = (3/2)nRT.

Exam Note: M must be in kg/mol (0.002).

Question 107. At what temperature will average speed of the molecules of the second member of the series CnH2n be the same of Cl2 at 627°C?
(a) 259.4 K
(b) 400 K
(c) 532.4 K
(d) None of these

Solution. Answer: (c) 532.4 K. The second member of CnH2n (first is C2H4) is C3H6, M = 42. uav ∝ √(T/M): T/42 = 900/71 so T = 42 × 900/71 = 532.4 K.

Teacher's Note: Equal average speeds mean equal T/M; the series starts at ethene (n = 2).

Exam Note: Second member is C3H6.

Question 108. If URMS of a gas is 30 R1/2 ms-1 at 27°C then the molar mass of gas is:
(a) 0.02 kg/mol
(b) 0.001 kg/mol
(c) 0.003 kg/mol
(d) 1 kg/mol

Solution. Answer: (d) 1 kg/mol. urms2 = 3RT/M: 900R = 3R × 300/M, so M = 1 kg/mol.

Teacher's Note: Square both sides; R cancels.

Exam Note: Use SI: M comes out in kg/mol.

Question 109. 6 × 1022 gas molecules each of mass 10-24 kg are taken in a vessel of 10 litre. What is the pressure exerted by gas molecules? The root mean square speed of gas molecules is 100 m/s.
(a) 20 Pa
(b) 2 × 104 Pa
(c) 2 × 105 Pa
(d) 2 × 107 Pa

Solution. Answer: (b) 2 × 104 Pa. P = (1/3)(mN/V)u2 = (1/3) × (10-24 × 6 × 1022/10-2) × 104 = (1/3) × 6 × 104 = 2 × 104 Pa (V = 10 L = 10-2 m3).

Teacher's Note: Kinetic equation P = mNu2/(3V) in SI units; 10 L is 10-2 m3.

Exam Note: Convert litres to m3.

Question 110. At what temperature will most probable speed of the molecules of the second member of homologous series CnH2n-2 be the same as that of SO2 at 527°C.
(a) 500°C
(b) 727°C
(c) 227°C
(d) None of these

Solution. Answer: (c) 227°C. The series CnH2n-2 starts with C2H2; the second member is C3H4, M = 40. ump ∝ √(T/M): T/40 = 800/64, T = 500 K = 227°C.

Teacher's Note: Equal most probable speeds mean equal T/M; first member is ethyne.

Exam Note: Convert K back to °C.

Question 111. The root mean square speed of 8 g of He is 300 ms-1. Total kinetic energy of He gas is:
(a) 120 J
(b) 240 J
(c) 360 J
(d) None of these

Solution. Answer: (c) 360 J. Total K.E. = (1/2)Murms2 = 0.5 × 0.008 kg × 3002 = 360 J.

Teacher's Note: Total translational K.E. of the gas is half of mass times rms speed squared.

Exam Note: Convert 8 g to 0.008 kg.

Question 112. If T1, T2 and T3 are the temperature at which the URMS, Uaverage, UMP of oxygen gas are all equal to 1500 m/s then the correct statement is:
(a) T1 > T2 > T3
(b) T1 < T2 < T3
(c) T1 = T2 = T3
(d) None of these

Solution. Answer: (b) T1 < T2 < T3. T1 = Mu2/3R (rms), T2 = πMu2/8R (average), T3 = Mu2/2R (most probable). The coefficients 1/3 = 0.333, π/8 = 0.393, 1/2 = 0.5 give T1 < T2 < T3.

Teacher's Note: For equal speed, the type with the smallest numerical factor needs the lowest temperature.

Exam Note: Compare 1/3, π/8, 1/2.

Question 113. The density of a gas filled electric lamp is 0.75 kg/m3. After the lamp has been switched on, the pressure in it increases from 4 × 104 Pa to 9 × 104 Pa. What is increases in URMS?
(a) 100
(b) 200
(c) 300
(d) None of these

Solution. Answer: (b) 200. urms = √(3P/d). Initially √(3 × 4 × 104/0.75) = 400 m/s; finally √(3 × 9 × 104/0.75) = 600 m/s. Increase = 200 m/s.

Teacher's Note: Constant density (fixed volume and mass): urms = √(3P/d).

Exam Note: Density stays constant in the lamp.

Question 114. The root mean square velocity of an ideal gas at constant pressure varies with density (d) as:
(a) d2
(b) d
(c) √d
(d) 1/√d

Solution. Answer: (d) 1/√d. urms = √(3P/d); at constant P, urms ∝ 1/√d.

Teacher's Note: urms = √(3P/d), so it varies as the inverse square root of density.

Exam Note: Constant P gives inverse square root.

Question 115. The ratio among most probable velocity, mean velocity and root mean square velocity is given by:
(a) 1 : 2 : 3
(b) 1 : √2 : √3
(c) √2 : √3 : √(8/π)
(d) √2 : √(8/π) : √3

Solution. Answer: (d) √2 : √(8/π) : √3. ump : uav : urms = √(2RT/M) : √(8RT/πM) : √(3RT/M) = √2 : √(8/π) : √3 (option (d); the option letter in the key is d).

Teacher's Note: Compare the three formulas, which share √(RT/M), leaving √2, √(8/π), √3.

Exam Note: Order: mp, average, rms.

Question 116. The average speed at temperature T°C of CH4(g) is √(28/88) × 103 ms-1. What is the value of T?
(a) 240.55°C
(b) -32.45°C
(c) 3000°C
(d) -24.055°C

Solution. Answer: (b) -32.45°C. uav = √(8RT/πM). Squaring: 8RT/(π × 0.016) = (28/88) × 106. Using π = 22/7: 8RT/M = 106, T = 106 × 0.016/(8 × 8.314) = 240.55 K = -32.45°C, option (b).

Teacher's Note: Square the average speed formula, with π = 22/7 the (28/88) factor cancels neatly.

Exam Note: Final conversion: 240.55 K - 273 = -32.45°C.

Question 117. At what temperature most probable speed of O2 molecules have the same value of root mean square speed of O2 molecules at 300 K?
(a) 150 K
(b) 600 K
(c) 750 K
(d) 900 K

Solution. Corrected: as printed, set ump(T) = urms(300 K): √(2RT/M) = √(3R × 300/M), so 2T = 900 and T = 450 K. None of the options (150, 600, 750, 900 K) is 450 K; the book's key and hint give (d) 900 K, which corresponds to a different version of the question (most probable speed of SO2 equal to rms speed of O2 at 300 K: 2T/64 = 3 × 300/32, T = 900 K). Printed question as asked: 450 K.

Teacher's Note: Equate √(2RT/M) with √(3R·300/M); M cancels because the gas is the same.

Exam Note: Compare the factors 2 and 3, not 3 and 2.

Question 118. The rms speed of N2 molecules in a gas is u. If the temperature is doubled and the nitrogen molecules dissociate into nitrogen atoms, the rms speed becomes:
(a) u/2
(b) 2u
(c) 4u
(d) 14u

Solution. Answer: (b) 2u. urms = √(3RT/M). After dissociation, M becomes 14 (half of 28) and T becomes 2T: u' = √(3R·2T/14) = √(4 × 3RT/28) = 2u.

Teacher's Note: Doubling T multiplies speed by √2 and halving M multiplies it by another √2.

Exam Note: Two factors of √2 give 2.

Question 119. The rate of diffusion of a gas is proportional to:
(a) P/√d
(b) P/d
(c) √(P/d)
(d) √P/d

Solution. Answer: (a) P/√d. Graham's law at different pressures: r ∝ P/√M, and M ∝ d at fixed T, so r ∝ P/√d.

Teacher's Note: Diffusion rate is proportional to pressure and inversely to the square root of density (or molar mass).

Exam Note: Rate ∝ P/√M.

Question 120. At constant volume and temperature conditions, the rates of diffusion rA and rB of gases A and B having densities ρA and ρB are related by the expression:
(a) rA = rB(ρA/ρB)2
(b) rA = rB(ρB/ρA)1/2
(c) rA = (rB·ρB/ρA)1/2
(d) rA = rB(ρA/ρB)1/2

Solution. Answer (from key): (d). Graham's law gives rA/rB = √(ρB/ρA), which is option (b). Corrected: the printed key letter (d) corresponds to rA = rB(ρA/ρB)1/2, which is inconsistent with Graham's law (at constant T the denser gas diffuses slower), so the correct option is (b).

Teacher's Note: Graham's law: rate is inversely proportional to the square root of density at the same T and P.

Exam Note: Denser gas diffuses slower.

Question 121. What is the ratio of diffusion rate of oxygen to hydrogen?
(a) 1 : 4
(b) 4 : 1
(c) 1 : 8
(d) 8 : 1

Solution. Answer: (a) 1 : 4. r(O2)/r(H2) = √(MH2/MO2) = √(2/32) = 1/4, i.e. 1 : 4.

Teacher's Note: Graham's law: lighter gas diffuses faster; ratio is the inverse square root of molar masses.

Exam Note: Oxygen is the slower gas.

Question 122. The molecular weight of a gas which diffuses through a porous plug at 1/6th of the speed of hydrogen under identical conditions is:
(a) 27
(b) 72
(c) 36
(d) 48

Solution. Answer: (b) 72. rH2/rgas = √(M/2) = 6, so M/2 = 36 and M = 72.

Teacher's Note: One-sixth the speed means molar mass is 62 = 36 times that of H2.

Exam Note: Square the speed ratio.

Question 123. X mL of H2 gas effuses through a hole in a container in 5 seconds. The time taken for the effusion of the same volume of the gas specified below under identical condition is:
(a) 10 sec: He
(b) 20 sec: O2
(c) 25 sec: CO
(d) 55 sec: CO2

Solution. Answer: (b) 20 sec: O2. For the same volume, t ∝ √M. t(O2) = 5 × √(32/2) = 5 × 4 = 20 s. (He: 5√2 = 7.1 s; CO: 5√14 = 18.7 s; CO2: 5√22 = 23.5 s.)

Teacher's Note: Same volume effused: time is proportional to the square root of molar mass.

Exam Note: Only O2 gives a whole number: 4 × 5 s.

Question 124. At identical temperature and pressure, the rate of diffusion of hydrogen gas is 3√3 times that of a hydrocarbon having molecular formula CnH2n-2. What is the value of n?
(a) 1
(b) 4
(c) 3
(d) 8

Solution. Answer: (b) 4. rH2/rHC = √(M/2) = 3√3, so M/2 = 27 and M = 54. For CnH2n-2: 12n + 2n - 2 = 54, n = 4 (C4H6).

Teacher's Note: Find M from Graham's law, then solve 14n - 2 = M.

Exam Note: Square the rate ratio: (3√3)2 = 27.

Question 125. Calculate relative rate of effusion of O2 to CH4 through a container containing O2 and CH4 in 3 : 2 mass ratio.
(a) 3√2/4
(b) 3/(4√2)
(c) 3/(2√2)
(d) none of these

Solution. Answer: (b) 3/(4√2). n(O2) = 3/32, n(CH4) = 2/16 = 4/32, so the partial pressure ratio p(O2) : p(CH4) = 3 : 4. r(O2)/r(CH4) = (3/4)√(16/32) = (3/4)(1/√2) = 3/(4√2).

Teacher's Note: Effusion rate depends on partial pressure as well as molar mass in a mixture.

Exam Note: Include both the mole ratio and Graham's √M ratio.

Question 126. Calculate relative rate of effusion of SO2 to CH4, if the mixture obtained by effusing out a mixture with molar ratio nSO2/nCH4 = 8/1 for three effusing steps.
(a) 2 : 1
(b) 1 : 4
(c) 1 : 2
(d) none of these

Solution. Answer: (c) 1 : 2. Graham's law: r(SO2)/r(CH4) = √(MCH4/MSO2) = √(16/64) = 1/2, i.e. 1 : 2 (the three-step enrichment of the mixture does not change the relative rate).

Teacher's Note: Relative effusion rates at equal pressure depend only on the inverse square root of molar masses.

Exam Note: Lighter CH4 effuses twice as fast as SO2.

Question 127. A gaseous mixture containing He, CH4 and SO2 was allowed to effuse through a fine hole then find what molar ratio of gases coming out initially? If mixture contain He, CH4 and SO2 in 1 : 2 : 3 mole ratio.
(a) 2 : 2 : 3
(b) 6 : 6 : 1
(c) √2 : √2 : 3
(d) 4 : 4 : 3

Solution. Answer: (d) 4 : 4 : 3. Initial effusion rate of each gas is proportional to n/√M: He = 1/√4 = 0.5; CH4 = 2/√16 = 0.5; SO2 = 3/√64 = 0.375. Ratio = 0.5 : 0.5 : 0.375 = 4 : 4 : 3.

Teacher's Note: Rate in a mixture is proportional to the mole fraction times 1/√M.

Exam Note: Multiply mole ratio by 1/√M for each gas.

Question 128. 80 mL of O2 takes 2 minute to pass through the hole. What volume of SO2 will pass through the hole in 3 minute?
(a) 120/√2
(b) 120 × √2
(c) 12/√2
(d) None of these

Solution. Answer: (a) 120/√2. Rate of O2 = 80/2 = 40 mL/min. Rate of SO2 = 40 × √(32/64) = 40/√2 mL/min. Volume in 3 minutes = 3 × 40/√2 = 120/√2 mL.

Teacher's Note: Graham's law: rate of SO2 equals the O2 rate times √(32/64).

Exam Note: Find the rate (volume per time) first.

Question 129. When two cotton plugs, one moistened with ammonia and the other with hydrochloric acid, are simultaneously inserted into opposite ends of a glass tube 87.0 cm long, a white ring of NH4Cl forms where gaseous NH3 and gaseous HCl first come into contact. NH3(g) + HCl(g) → NH4Cl(s). At what distance from the ammonia-moistened plug does this occur?
(a) 51.7 cm from NH3 end
(b) 51.7 cm from HCl end
(c) 43.5 at mid point
(d) None of these

Solution. Answer: (a) 51.7 cm from NH3 end. Distances travelled in the same time are proportional to rates: d(NH3)/d(HCl) = √(36.5/17) = 1.465. d(NH3) = 87.0 × 1.465/2.465 = 51.7 cm from the NH3 end.

Teacher's Note: Lighter NH3 travels farther in the same time, so the ring forms nearer the HCl end.

Exam Note: Distances in equal time are in the ratio of rates.

Question 130. Dimethyl ether decomposes as CH3OCH3(g) → CH4(g) + CO(g) + H2(g). When CH3OCH3 decomposes to 20% extent at certain fixed conditions, what is the ratio of diffusion of pure CH3OCH3 with methane?
(a) 0.59 : 1
(b) 1.18 : 1
(c) 2.36 : 1
(d) 1.77 : 1

Solution. Answer: (c) 2.36 : 1. Start with 1 mol: 0.8 mol CH3OCH3 left; 0.2 mol each of CH4, CO, H2 formed (total 1.4 mol). Partial pressure ratio P(ether)/P(CH4) = 0.8/0.2 = 4. r(ether)/r(CH4) = (Pether/PCH4)√(MCH4/Mether) = 4 × √(16/46) = 4 × 0.59 = 2.36 : 1.

Teacher's Note: In a mixture, diffusion rate depends on partial pressure as well as 1/√M; ether is 4 times as abundant.

Exam Note: Include the 4 : 1 partial pressure ratio.

Question 131. 4 gm of sulphur dioxide gas diffuses from a container in 8 min. Mass of helium gas diffusing from the same container over the same time interval is:
(a) 0.5 gm
(b) 1 gm
(c) 2 gm
(d) None of these

Solution. Answer: (b) 1 gm. Same time: n(He)/n(SO2) = √(MSO2/MHe) = √(64/4) = 4. n(SO2) = 4/64 = 0.0625 mol, so n(He) = 0.25 mol = 1 g.

Teacher's Note: Compare moles diffused (not masses) with Graham's law, then convert back to grams.

Exam Note: Convert to moles before applying Graham's law.

Question 132. Under identical conditions of pressure and temperature, 4 L of gaseous mixture (H2 and CH4) effuses through a hole in 5 min whereas 4 L of a gas X of molecular mass 36 takes to 10 min to effuse through the same hole. The mole ratio of H2 : CH4 in the mixture is:
(a) 1 : 2
(b) 2 : 1
(c) 2 : 3
(d) 1 : 1

Solution. Answer: (d) 1 : 1. r(mix)/r(X) = (4/5)/(4/10) = 2 = √(36/Mmix), so Mmix = 9. For mole fraction x of H2: 2x + 16(1 - x) = 9, x = 0.5. H2 : CH4 = 1 : 1.

Teacher's Note: Average molar mass of the mixture from Graham's law, then solve the mole fraction equation.

Exam Note: Rate is volume divided by time.

Question 133. A balloon weighing 50 kg is filled with 685 kg of helium at 1 atm pressure and 25°C. What will be its pay load if it displaced 5108 kg of air?
(a) 4373 kg
(b) 4423 kg
(c) 5793 kg
(d) none of these

Solution. Answer: (a) 4373 kg. Pay load = mass of air displaced - (mass of balloon + mass of helium) = 5108 - (50 + 685) = 4373 kg.

Teacher's Note: Buoyancy: lifting capacity is displaced air minus the weight of the balloon and its gas.

Exam Note: Subtract both balloon and helium masses.

Question 134. According to the law of equipartition of energy, the energy associated with each degree of freedom is:
(a) (1/3)kBT
(b) (1/2)kBT
(c) kBT
(d) (3/2)kBT

Solution. Answer: (b) (1/2)kBT. Each degree of freedom (translational, rotational) contributes (1/2)kBT per molecule, i.e. (1/2)RT per mole.

Teacher's Note: Equipartition: every quadratic degree of freedom carries kT/2 of energy per molecule.

Exam Note: Per molecule (1/2)kT, per mole (1/2)RT.

Question 135. Calculate γ (ratio of Cp and Cv) for triatomic linear gas at high temperature. Assume that the contribution of vibrational degree of freedom is 75%:
(a) 1.222
(b) 1.121
(c) 1.18
(d) 1.33

Solution. Answer: (c) 1.18. Linear triatomic: 3 translational + 2 rotational + 4 vibrational modes. Cv = (3/2)R + R + 0.75 × 4R = 5.5R. Cp = Cv + R = 6.5R. γ = 6.5/5.5 = 1.18.

Teacher's Note: Linear triatomic has 3N - 5 = 4 vibrational modes, each contributing R at full activity; take 75% of that.

Exam Note: Vibration contributes R per mode (kinetic plus potential).

Question 136. If one mole each of a monoatomic and diatomic gases are mixed at low temperature then Cp/Cv ratio for the mixture is:
(a) 1.40
(b) 1.428
(c) 1.5
(d) 1.33

Solution. Answer: (c) 1.5. At low temperature vibration is inactive. Cv(mono) = 3R/2, Cv(di) = 5R/2. For the mixture (1 mol each): Cv = (1.5R + 2.5R)/2 = 2R; Cp = 3R. γ = 3/2 = 1.5.

Teacher's Note: Average the molar Cv of the two gases (3R/2 and 5R/2), then add R for Cp.

Exam Note: Equal moles: simple average of Cv.

Question 137. If one mole of a mono-atomic gas (γ = 5/3) is mixed with one mole of a diatomic gas (γ = 7/5), the value of γ for the mixture is:
(a) 1.4
(b) 1.5
(c) 1.53
(d) 3.07

Solution. Answer: (b) 1.5. Cv(mono) = R/(γ - 1) = 1.5R; Cv(di) = R/(7/5 - 1) = 2.5R. Mixture: Cv = 2R, Cp = 3R; γ = 1.5.

Teacher's Note: Convert each γ to Cv = R/(γ - 1), average, then recompute γ.

Exam Note: Never average γ directly.

Question 138. Select the correct statement:
(a) internal energy of a real gas at a given temperature increases as the volume increases
(b) internal energy of an ideal gas at given temperature increase as the volume increases
(c) internal energy of an ideal gas molecules is not a function of temperature
(d) the internal energy of a real gas at a constant temperature is independent of change in volume

Solution. Answer: (a) internal energy of a real gas at a given temperature increases as the volume increases. For a real gas, expansion at constant T increases the mean separation of molecules, which raises the intermolecular potential energy, so internal energy increases with volume. For an ideal gas, U depends on T only.

Teacher's Note: Real gases have attractive forces, so moving molecules apart adds potential energy.

Exam Note: Ideal gas U is volume-independent; real gas U is not.

Question 139. Which gas shows real behaviour?
(a) 16 g O2 at STP occupies 11.2 L
(b) 1 g H2 in 0.5 L flask exerts pressure of 24.63 atm at 300 K
(c) 1 mole NH3 at 300 K and 1 atm occupies volume 22.4 L
(d) 5.6 L of CO2 at STP is equal to 11 g

Solution. Answer: (c) 1 mole NH3 at 300 K and 1 atm occupies volume 22.4 L. Ideal volume of 1 mol at 300 K and 1 atm = 24.6 L, but NH3 is stated to occupy 22.4 L, so it deviates from ideal behaviour. In the others: (a) 0.5 mol at STP = 11.2 L; (b) 0.5 mol in 0.5 L at 300 K gives 24.63 atm; (d) 0.25 mol CO2 = 11 g, 5.6 L at STP: all ideal.

Teacher's Note: Compare each stated quantity with the ideal gas prediction; only NH3 disagrees.

Exam Note: Compute the ideal value before comparing.

Question 140. Consider a real gas placed in a container. If the intermolecular attractions are supposed to disappear suddenly which of the following would happen?
(a) The pressure decreases
(b) The pressure increases
(c) The pressure remains unchanged
(d) The gas collapses

Solution. Answer: (b) The pressure increases. Attractive forces reduce the force of collisions with the walls. If attractions vanish, molecules hit the walls harder and the pressure increases.

Teacher's Note: Real pressure = ideal pressure minus an attraction correction (an2/V2).

Exam Note: Attractions lower pressure; removing them raises it.

Question 141. The pressure of real gases is less than the pressure of an ideal gas because of:
(a) Increase in number of collisions
(b) Finite size of molecule
(c) Increase in KE of molecules
(d) Intermolecular forces of attraction

Solution. Answer: (d) Intermolecular forces of attraction. Intermolecular attractions pull molecules away from the walls and weaken collisions, so real pressure is less than ideal pressure.

Teacher's Note: The a-term in van der Waals' equation corrects for attractions that reduce pressure.

Exam Note: Attraction lowers P; molecular size lowers V.

Question 142. A gas behaves like an ideal gas at:
(a) high pressure and low temperature
(b) low pressure and high temperature
(c) high pressure and high temperature
(d) low pressure and low temperature

Solution. Answer: (b) low pressure and high temperature. At low pressure molecules are far apart, so volume and attractions are negligible; at high temperature kinetic energy overwhelms attractions. Both conditions favour ideal behaviour.

Teacher's Note: Ideal behaviour needs negligible molecular volume and negligible attractions.

Exam Note: Low P and high T.

Question 143. If temperature and volume are same, the pressure of a gas obeying Vander Waals equation is:
(a) Smaller than that of an ideal gas
(b) Larger than that of an ideal gas
(c) Same as that of an ideal gas
(d) None of these

Solution. Answer: (a) Smaller than that of an ideal gas. P = nRT/(V - nb) - an2/V2. As given in the book's key: (a), the attraction term lowers the pressure below that of an ideal gas under ordinary conditions.

Teacher's Note: Compare the two corrections: attractions reduce pressure, molecular volume increases it.

Exam Note: Answer as given in the key, valid for ordinary conditions.

Question 144. 1 mole of each of X1, X2, X3 with vander Waals constants a (in atm L2 mol-2) 1.0, 3.8, 2.1 respectively is kept separately in three different vessels of equal volume at identical temperature. Their pressures are observed to P1, P2 and P3 respectively. On the basis of this data alone, select the correct option (neglect the effect of 'b'):
(a) P1 < P2 < P3
(b) P2 < P1 < P3
(c) P2 < P3 < P1
(d) P1 = P2 = P3

Solution. Answer: (c) P2 < P3 < P1. With b neglected: P = RT/V - a/V2. For the same V and T, the larger a gives a lower pressure: a2 (3.8) > a3 (2.1) > a1 (1.0), so P2 < P3 < P1.

Teacher's Note: With b ignored, pressure falls as a rises.

Exam Note: Rank by a, then reverse the order.

Question 145. A gas obeys the equation of state P(V - b) = RT (The parameter b is a constant). The slope for an isochore will be:
(a) Negative
(b) Zero
(c) R/(V - b)
(d) R/P

Solution. Answer: (c) R/(V - b). P = RT/(V - b). At constant V, dP/dT = R/(V - b), the slope of an isochore (P versus T).

Teacher's Note: Differentiate P = RT/(V - b) with respect to T at constant V.

Exam Note: Slope of P-T line: R/(V - b).

Question 146. van der Waals constant b of helium is 24 mL mol-1. Find molecular diameter of helium.
(a) 1.335 × 10-10 cm
(b) 1.335 × 10-8 cm
(c) 2.67 × 10-8 cm
(d) 4.34 × 10-8 cm

Solution. Answer: (c) 2.67 × 10-8 cm. b = 4NA(4/3)πr3. r3 = 24/(4 × 6.022 × 1023 × 4.189) = 2.38 × 10-24 cm3, r = 1.335 × 10-8 cm. Diameter d = 2r = 2.67 × 10-8 cm.

Teacher's Note: b is four times the actual molecular volume per mole; find r, then double for diameter.

Exam Note: Question asks diameter, not radius.

Question 147. Which of the following can be most readily liquefied? (Given: value of 'a' for NH3 = 4.17, CO2 = 3.59, SO2 = 6.71, Cl2 = 6.49)
(a) NH3
(b) Cl2
(c) SO2
(d) CO2

Solution. Answer: (c) SO2. The larger the van der Waals constant a (stronger attractions), the more easily the gas is liquefied. SO2 has the largest a (6.71).

Teacher's Note: Large a means strong intermolecular attraction and higher critical temperature.

Exam Note: Pick the largest 'a'.

Question 148. For which of the following gases should the correction for the molecular volume be largest: CO, CO2, NH3 or SF6?
(a) CO
(b) CO2
(c) NH3
(d) SF6

Solution. Answer: (d) SF6. The volume correction is nb, and b is largest for the largest molecule. SF6 is by far the biggest molecule here.

Teacher's Note: b reflects molecular size; SF6 is the largest of the four molecules.

Exam Note: Largest molecule has largest b.

Question 149. Under which of the following sets of conditions is a real gas expected to deviate from ideal behaviour? (I) High pressure, small volume (II) High temperature, low pressure (III) Low temperature, high pressure
(a) only I
(b) only II
(c) only III
(d) I and III both

Solution. Answer: (d) I and III both. Deviations are large at high pressure (small volume) and at low temperature, so conditions I and III cause deviation. High temperature with low pressure (II) is where the gas is nearly ideal.

Teacher's Note: Deviation needs molecules close together (high P) or slow (low T).

Exam Note: II is the ideal-gas region.

Question 150. For a certain gas which deviates a little from ideal behaviour. A plot between P/ρ vs P was found to be non-linear, the intercept on y-axis will be:
(a) RT/M
(b) M/RT
(c) MZ/RT
(d) R/TM

Solution. Answer: (a) RT/M. ρ = PM/(ZRT) for a real gas, so P/ρ = ZRT/M. As P → 0, Z → 1 and the intercept on the P/ρ axis is RT/M.

Teacher's Note: Intercept is the limiting (P = 0) value where the gas is ideal: P/ρ = RT/M.

Exam Note: At P → 0, Z → 1.

Question 151. At low pressure, the van der Waals equation become:
(a) PVm = RT
(b) P(Vm - b) = RT
(c) (P + a/Vm2)Vm = RT
(d) P = RT/Vm + a/Vm2

Solution. Answer: (c) (P + a/Vm2)Vm = RT. At low pressure V is large, so b is negligible compared with Vm, but the attraction term a/Vm2 still matters: (P + a/Vm2)Vm = RT.

Teacher's Note: At low P, V - b ≈ V, but the a/V2 correction remains.

Exam Note: Drop b, keep a.

Question 152. At low pressure, if RT = 2√(aP), then the volume occupied by a real gas is:
(a) 2RT/P
(b) 2P/RT
(c) RT/2P
(d) 2RT/P

Solution. Answer: (c) RT/2P. At low pressure: (P + a/V2)V = RT, i.e. PV2 - RTV + a = 0. Discriminant = (RT)2 - 4Pa = 4aP - 4aP = 0, so V = RT/(2P). (As printed, options (a) and (d) both read 2RT/P.)

Teacher's Note: Write the equation as a quadratic in V; the given condition makes the discriminant zero.

Exam Note: Zero discriminant: V = RT/2P.

Question 153. For a gas deviation from ideal behaviour is maximum at:
(a) 0°C and 1.0 atm
(b) 100°C and 2.0 atm
(c) -13°C and 1.0 atm
(d) -13°C and 2.0 atm

Solution. Answer: (d) -13°C and 2.0 atm. Deviation from ideality is greatest at low temperature and high pressure: -13°C (lowest T) and 2.0 atm (highest P).

Teacher's Note: Choose the lowest T together with the highest P.

Exam Note: Low T plus high P.

Question 154. At low pressures, van der Waals' equation is written as (P + a/V2)V = RT. The compressibility factor is then equal to:
(a) 1 - a/(RTV)
(b) 1 - RTV/a
(c) 1 + a/(RTV)
(d) 1 + RTV/a

Solution. Answer: (a) 1 - a/(RTV). PV + a/V = RT, so PV = RT - a/V. Z = PV/RT = 1 - a/(RTV).

Teacher's Note: Divide PV = RT - a/V by RT.

Exam Note: Z is less than 1: attractions dominate at low P.

Question 155. The compressibility factor for a real gas at high pressure is:
(a) 1
(b) 1 + Pb/RT
(c) 1 - Pb/RT
(d) 1 + RT/Pb

Solution. Answer: (b) 1 + Pb/RT. At high pressure the a-term is negligible and P(V - b) = RT gives PV = RT + Pb, so Z = 1 + Pb/RT.

Teacher's Note: At high P the volume correction dominates, giving Z greater than 1.

Exam Note: Z = 1 + Pb/RT.

Question 156. The compressibility of a gas is greater than unity at 1 atm and 273 K. Therefore:
(a) Vm > 22.4 L
(b) Vm < 22.4 L
(c) Vm = 22.4 L
(d) Vm = 44.8 L

Solution. Answer: (a) Vm > 22.4 L. Z = PVm/RT > 1 at 1 atm and 273 K means Vm > RT/P = 22.4 L.

Teacher's Note: Ideal molar volume at 1 atm, 273 K is 22.4 L; Z above 1 means larger real volume.

Exam Note: Z = V real over V ideal.

Question 157. At 273 K temp. and 9 atm pressure, the compressibility factor for a gas is 0.9. The volume of 1 milli-moles of gas at this temperature and pressure is:
(a) 2.24 litre
(b) 0.020 mL
(c) 2.24 mL
(d) 22.4 mL

Solution. Answer: (c) 2.24 mL. V = ZnRT/P = (0.9 × 10-3 × 0.0821 × 273)/9 = 2.24 × 10-3 L = 2.24 mL.

Teacher's Note: Use PV = ZnRT with n = 10-3 mol; convert litres to mL.

Exam Note: 1 milli-mole is 10-3 mol.

Question 158. The compressibility factor for nitrogen at 330 K and 800 atm is 1.90 and at 570 K and 200 atm is 1.10. A certain mass of N2 occupies a volume of 1 dm3 at 330 K and 800 atm. Calculate volume occupied by same quantity of N2 gas at 570 K and 200 atm:
(a) 1 L
(b) 2 L
(c) 3 L
(d) 4 L

Solution. Answer: (d) 4 L. n = PV/ZRT is constant: V2 = V1(Z2T2P1)/(Z1T1P2) = 1 × (1.10 × 570 × 800)/(1.90 × 330 × 200) = 4.0 L.

Teacher's Note: Equate n = PV/ZRT for the two states and solve for V2.

Exam Note: Include Z in each state.

Question 159. Consider the equation Z = PV/RT. Which of the following statements is correct?
(a) When Z > 1, real gases are easier to compress than the ideal gas
(b) When Z = 1, real gases get compressed easily
(c) When Z > 1, real gases are difficult to compress
(d) When Z = 1, real gases are difficult to compress

Solution. Answer: (c) When Z > 1, real gases are difficult to compress. Z > 1 means repulsive forces dominate, so the real gas has a larger volume than ideal at the same P and T and is harder to compress than an ideal gas.

Teacher's Note: Z above 1 indicates repulsion (finite size) dominates, resisting compression.

Exam Note: Z > 1: harder to compress.

Question 160. What is the compressibility factor (Z) for 0.02 mole of a van der Waals' gas at pressure of 0.1 atm. Assume that the size of gas molecules is negligible. Given: RT = 20 L atm mol-1 and a = 1000 atm L2 mol-2
(a) 2
(b) 1
(c) 0.02
(d) 0.5

Solution. Answer: (d) 0.5. With b = 0: (P + an2/V2)V = nRT. nRT = 0.4 L atm, an2 = 1000 × 4 × 10-4 = 0.4. So 0.1V + 0.4/V = 0.4, i.e. V2 - 4V + 4 = 0, V = 2 L. Z = PV/nRT = (0.1 × 2)/0.4 = 0.5.

Teacher's Note: Solve the quadratic for V first; Z = PV/nRT afterwards.

Exam Note: The quadratic is a perfect square.

Question 161. Consider the following statements. If the van der Waals' parameters of two gases are given as: Gas A: a = 6.5 dm6 bar mol-2, b = 0.055 dm3 mol-1; Gas B: a = 2, b = 0.01. then: 1. Critical volume of A < Critical volume of B. 2. Critical pressure A > Critical pressure of B. 3. Critical temperature of A > Critical temperature of B. Which of the above statements is incorrect?
(a) 1 alone
(b) 1 and 2
(c) 1, 2 and 3
(d) 2 and 3

Solution. Answer: (c) 1, 2 and 3. Corrected: Vc = 3b: A = 0.165 dm3, B = 0.030 dm3, so Vc(A) > Vc(B) and statement 1 is incorrect. Pc = a/27b2: A = 79.6 bar, B = 740.7 bar, so Pc(A) < Pc(B): statement 2 is incorrect. Tc = 8a/27Rb: A = 52/(27R × 0.055) ≈ 35.0/R, B = 16/(27R × 0.01) ≈ 59.3/R, so Tc(A) < Tc(B): statement 3 is incorrect. All three are incorrect: option (c). The book's key marks (d) 2 and 3.

Teacher's Note: Use Vc = 3b, Pc = a/27b2, Tc = 8a/27Rb and compare numbers.

Exam Note: Evaluate all three critical constants for both gases.

Question 162. The van der Waals parameters for gases W, X, Y and Z are (a in atm L2 mol-2, b in L mol-1): W: 4.0, 0.027; X: 8.0, 0.030; Y: 6.0, 0.032; Z: 12.0, 0.027. Which one of these gases has the highest critical temperature?
(a) W
(b) X
(c) Y
(d) Z

Solution. Answer: (d) Z. Tc = 8a/27Rb is proportional to a/b. a/b: W = 148, X = 267, Y = 188, Z = 444. Gas Z has the highest critical temperature.

Teacher's Note: Critical temperature is proportional to a/b; compute the ratio for each gas.

Exam Note: Tc goes as a/b.

Question 163. Pressure remaining the same, the volume of a given mass of an ideal gas increases for every degree centigrade rise in temperature by definite fraction of its volume at:
(a) 0°C
(b) its critical temperature
(c) absolute zero
(d) its Boyle temperature

Solution. Answer: (a) 0°C. Charles' law: Vt = V0(1 + t/273), so the volume increases by 1/273 of its volume at 0°C for each degree rise.

Teacher's Note: Charles' law is defined as a fraction (1/273) of the volume at 0°C.

Exam Note: The reference volume is V0, at 0°C.

Question 164. The critical temperature of a substance is:
(a) The temperature above which the substance undergoes decomposition
(b) The temperature above which a substance can exist only in gaseous state
(c) Boiling point of the substance
(d) All are wrong

Solution. Answer: (b) The temperature above which a substance can exist only in gaseous state. Above the critical temperature Tc a gas cannot be liquefied by any pressure, so the substance can exist only in the gaseous state.

Teacher's Note: Critical temperature is the maximum T at which liquid and vapour phases can coexist.

Exam Note: Above Tc: gas only.

Question 165. The excluded volume of a gas will be larger, if TC/PC is:
(a) small
(b) large
(c) equal to 1
(d) less than unity

Solution. Answer: (b) large. Tc/Pc = (8a/27Rb)/(a/27b2) = 8b/R. Excluded volume depends on b, so a larger Tc/Pc means a larger b.

Teacher's Note: Tc/Pc reduces to 8b/R, so it tracks b.

Exam Note: Ratio proportional to b.

Question 166. Select incorrect statement:
(a) we can condense vapour simply by applying pressure
(b) to liquefy a gas one must lower the temperature below Tc and also apply pressure
(c) at Tc, there is no distinction between liquid and vapour state hence density of the liquid is nearly equal to density of the vapour
(d) However great the pressure applied, a gas cannot be liquefied below it's critical temp.

Solution. Answer: (d) However great the pressure applied, a gas cannot be liquefied below it's critical temp.. A gas can be liquefied by applying pressure at temperatures below its critical temperature. It cannot be liquefied above Tc however great the pressure. So statement (d) is incorrect.

Teacher's Note: Liquefaction is possible only at or below Tc; statement (d) reverses this.

Exam Note: Look for the reversed Tc statement.

Question 167. The correct order of temperature of a real gas is: (I) Boyle's temperature (II) Critical temperature (III) Inversion temperature
(a) III > I > II
(b) I > II > III
(c) II > I > III
(d) I > III > II

Solution. Answer: (a) III > I > II. Ti = 2a/Rb, TB = a/Rb, Tc = 8a/27Rb. In units of a/Rb: 2 > 1 > 0.296. So inversion temperature > Boyle temperature > critical temperature: III > I > II.

Teacher's Note: Express all three in units of a/Rb: 2, 1 and 8/27.

Exam Note: Inversion is twice the Boyle temperature.

Question 168. The temperature at which the second virial coefficient of real gas is zero is called:
(a) Critical temperature
(b) Triple point
(c) Boiling point
(d) Boyle's temperature

Solution. Answer: (d) Boyle's temperature. The second virial coefficient B = b - a/RT is zero at T = a/Rb, which is the Boyle temperature.

Teacher's Note: B = b - a/RT vanishes at TB = a/Rb.

Exam Note: B = 0 at the Boyle temperature.

Question 169. The van der Waals' equation for one mole may be expressed as Vm3 - (b + RT/p)Vm2 + (a/p)Vm - ab/p = 0, where Vm is the molar volume of the gas. Which of the following is incorrect?
(a) For a temperature less than Tc, V has three real roots
(b) For a temperature less than Tc, V has three imaginary roots
(c) For a temperature equal to Tc all three roots of V are real and identical
(d) On increasing the temp. (T < Tc), the three roots become closer to one another

Solution. Answer: (b) For a temperature less than Tc, V has three imaginary roots. Below Tc the cubic has three real (unequal) roots; at Tc they are real and identical; as T rises towards Tc they converge. A cubic with real coefficients cannot have three imaginary roots, so (b) is incorrect.

Teacher's Note: A cubic with real coefficients always has at least one real root.

Exam Note: Three imaginary roots are impossible.

Question 170. For a gas obeying van der Waals' equation, at the critical temperature: ((a) both (∂P/∂V)T and (∂2P/∂V2)T are zero; (b) both are not zero; (c) (∂P/∂V)T is zero but (∂2P/∂V2)T is non-zero; (d) (∂P/∂V)T is non-zero but (∂2P/∂V2)T is zero. The book prints the first derivative in (a) and (c) as ∂P/∂P, read here as ∂P/∂V.)

Solution. Answer: (a). The critical point is the point of inflection of the isotherm with a horizontal tangent: (∂P/∂V)T = 0 and (∂2P/∂V2)T = 0. Option (a).

Teacher's Note: Critical isotherm has a horizontal inflection point: first and second derivatives vanish.

Exam Note: Both derivatives vanish at the critical point.

Question 171. However great the pressure, a gas cannot be liquefied above its:
(a) Boyle temperature
(b) Inversion temperature
(c) Critical temperature
(d) Room temperature

Solution. Answer: (c) Critical temperature. Above the critical temperature there is no distinction between liquid and gas, and no pressure can liquefy the gas.

Teacher's Note: Critical temperature is the maximum temperature for liquefaction.

Exam Note: Above Tc no liquefaction.

Question 172. The temperature at which real gases obey the ideal gas laws over a wide range of low pressure is called:
(a) Critical temperature
(b) Inversion temperature
(c) Boyle temperature
(d) Reduced temperature

Solution. Answer: (c) Boyle temperature. At the Boyle temperature TB = a/Rb the attractive and repulsive effects cancel (B = 0), so the gas obeys PV = nRT over a wide pressure range.

Teacher's Note: At Boyle temperature the second virial coefficient is zero and Boyle's law holds closely.

Exam Note: Boyle temperature: Z ≈ 1 over wide P.

Question 173. Inversion temperature (Ti = 2a/Rb) is defined as the temperature above which if gas is expanded adiabatically it gets warm up but if temperature of gas is lower than Ti then it will cool down. What will happen to a gas if it is adiabatically expanded at 600 K if its Boyle's temperature is 290 K?
(a) Heating
(b) Cooling
(c) Constant
(d) None

Solution. Answer: (a) Heating. Ti = 2TB = 2 × 290 = 580 K. Since 600 K is above Ti, the gas gets warmer on expansion (heating).

Teacher's Note: Inversion temperature is twice the Boyle temperature; compare 600 K with 580 K.

Exam Note: Above Ti the gas heats up.

Question 174. The van der Waals' equation of law of corresponding states for 1 mole of gas is:
(a) (Pr + 3/Vr2)(3Vr - 1) = 8Tr
(b) (Pr - 3/Vr2)(3Vr - 1) = 8Tr
(c) (Pr + 3/Vr2)(3Vr + 1) = 8πTr
(d) (Pr + 3/Vr2)(3Vr + 1) = 8

Solution. Answer: (a) (Pr + 3/Vr2)(3Vr - 1) = 8Tr. Substituting P = PrPc, V = VrVc, T = TrTc (Pc = a/27b2, Vc = 3b, Tc = 8a/27Rb) in the van der Waals equation gives (Pr + 3/Vr2)(3Vr - 1) = 8Tr.

Teacher's Note: Put critical constants into the van der Waals equation; a and b cancel, leaving a universal form.

Exam Note: Memorise the reduced equation.

Question 175. Calculate the volume occupied by 16 gram O2 at 300 K and 8.31 MPa if PcVc/RTc = 3/8 and PrVr/Tr = 2.21 (Given: R = 8.314 MPa/K-mol)
(a) 125.31 mL
(b) 124.31 mL
(c) 248.62 mL
(d) none of these

Solution. Answer: (b) 124.31 mL. Z = PV/nRT = (PcVc/RTc)(PrVr/Tr) = (3/8) × 2.21 = 0.829. n = 16/32 = 0.5 mol. V = ZnRT/P = (0.829 × 0.5 × 8.314 × 300)/8.31 = 124.4 mL, i.e. 124.31 mL (option (b)) within rounding.

Teacher's Note: Z equals the product of the critical compressibility factor and PrVr/Tr; then use V = ZnRT/P.

Exam Note: R in MPa-mL units gives volume in mL.

Level 2

Question L2-1. Consider the composite system, which is held at 300 K, shown in the following figure (three compartments in a row separated by barriers: He, 2 L, 1.50 atm; Ne, 4 L, 2.50 atm; Xe, 1 L, 1 atm). Assuming ideal gas behavior, calculate the total pressure if the barriers separating the compartments are removed. Assume that the volume of the barriers is negligible. (Given: R = 0.082 atm L/mol. K)
(a) 1 atm
(b) 2 atm
(c) 2.3 atm
(d) 3.2 atm

Solution. Answer: (b) 2 atm. n(He) = 1.5 × 2/RT = 3/RT; n(Ne) = 2.5 × 4/RT = 10/RT; n(Xe) = 1 × 1/RT = 1/RT. Total n = 14/RT. Total volume = 2 + 4 + 1 = 7 L. P = nRT/V = 14/7 = 2 atm.

Teacher's Note: At constant T, total PV of the separate gases equals PV of the mixture: (3 + 10 + 1)/7.

Exam Note: Add the PV products, divide by total volume.

Question L2-2. 11 moles N2 and 12 moles of H2 mixture reacted in 20 litre vessel at 800 K. After equilibrium was reached, 6 mole of H2 was present. 3.58 litre of liquid water is injected in equilibrium mixture and resultant gaseous mixture suddenly cooled to 300K. What is the final pressure of gaseous mixture? Neglect vapour pressure of liquid solution. Assume (i) all NH3 dissolved in water (ii) no change in volume of liquid (iii) no reaction of N2 and H2 at 300 K (figure: initial vessel N2 11 moles, H2 12 moles at 800 K, V = 20 L; final vessel at 300 K with N2, H2 gas above NH3(aq) solution)
(a) 18.47 atm
(b) 60 atm
(c) 22.5 atm
(d) 45 atm

Solution. Answer: (c) 22.5 atm. N2 + 3H2 ⇌ 2NH3: initially 11, 12, 0; at equilibrium H2 = 6, so 6 mol H2 reacted: N2 = 11 - 2 = 9 mol, NH3 = 4 mol. All NH3 dissolves in water, leaving 9 + 6 = 15 mol gas. Gas volume = 20 - 3.58 = 16.42 L. P = nRT/V = (15 × 0.0821 × 300)/16.42 = 22.5 atm.

Teacher's Note: Count moles at equilibrium, remove dissolved NH3, and reduce the gas volume by the injected water.

Exam Note: Gas volume is vessel volume minus liquid water volume.

Question L2-3. Two vessels connected by a valve of negligible volume. One container (I) has 2.8 g of N2 at temperature T1 (K). The other container (II) is completely evacuated. The container (I) is heated to T2 (K) while container (II) is maintained at T2/3 (K). volume of vessel (I) is half that of vessel (II). If the valve is opened then what is the weight ratio of N2 in both vessel (WI/WII)?
(a) 1 : 2
(b) 1 : 3
(c) 1 : 6
(d) 3 : 1

Solution. Answer: (c) 1 : 6. After opening, the pressure is equal in both vessels. Let VI = V, VII = 2V. nIRT2/V = nIIR(T2/3)/(2V), so nII = 6nI. Total 0.1 mol: nI = 0.1/7 mol (0.4 g), nII = 0.6/7 mol (2.4 g). WI : WII = 1 : 6.

Teacher's Note: Equal final pressure in connected vessels: n is proportional to V/T for each vessel.

Exam Note: Equal pressure fixes the mole ratio, not equal moles.

Question L2-4. A mixture of NH3(g) and N2H4(g) is placed in a sealed container at 300 K. The total pressure is 0.5 atm. The container is heated to 1200 K at which time both substances decompose completely according to the equations 2NH3(g) → N2(g) + 3H2(g) and N2H4(g) → N2(g) + 2H2(g). After decomposition is complete, the total pressure at 1200 K is found to be 4.5 atm. Find the mole% of N2H4 in the original mixture:
(a) 20%
(b) 25%
(c) 50%
(d) 75%

Solution. Answer: (b) 25%. Let n1 mol NH3 and n2 mol N2H4. NH3 gives 2 mol of gas per 1 mol and N2H4 gives 3 mol per mol: total moles after = 2n1 + 3n2. At constant V: 0.5V = (n1 + n2)R × 300 and 4.5V = (2n1 + 3n2)R × 1200. Dividing: (2n1 + 3n2)/(n1 + n2) = 9/4, so n1/n2 = 3. Mole % N2H4 = 1/4 × 100 = 25%.

Teacher's Note: At constant V, P/(nT) is constant; NH3 doubles its moles and N2H4 triples them.

Exam Note: Use pressure and temperature ratios together.

Question L2-5. Correct expression for density of an ideal gas mixture of two gases 1 and 2, where m1 and m2 are masses and n1 and n2 are moles, M1 and M2 are molar masses.
(a) d = (m1 + m2)/(M1 + M2)
(b) d = [(m1 + m2)/(n1 + n2)] × P/RT
(c) d = [(n1 + n2)/(m1 + m2)] × P/RT
(d) None of these

Solution. Answer: (b) d = [(m1 + m2)/(n1 + n2)] × P/RT. d = P Mavg/RT with Mavg = total mass/total moles = (m1 + m2)/(n1 + n2). So d = (m1 + m2)P/[(n1 + n2)RT].

Teacher's Note: A mixture behaves as one gas with average molar mass equal to total mass over total moles.

Exam Note: Average M is mass over moles, not a sum of M.

Question L2-6. Two closed vessel A and B of equal volume containing air at pressure P1 and temperature T1 are connected to each other through a narrow open tube. If the temperature of one is now maintained at T1 and other at T2 (where T1 > T2) then that will be the final pressure?
(a) T1/(2P1T2)
(b) 2P1T2/(T1 + T2)
(c) 2P1T1/(T1 - T2)
(d) 2P1/(T1 + T2)

Solution. Answer: (b) 2P1T2/(T1 + T2). Total moles are conserved: 2P1V/(RT1) = PV/(RT1) + PV/(RT2). So 2P1/T1 = P(1/T1 + 1/T2) = P(T1 + T2)/(T1T2), giving P = 2P1T2/(T1 + T2).

Teacher's Note: Equate initial total moles with final moles in the two vessels at the common pressure P.

Exam Note: Moles conserved, pressure equal.

Question L2-7. A balloon containing 1 mole air initially at 1 atm is filled further with air till pressure increases to 4 atm. The initial diameter of the balloon is 1 m and the pressure at each stage is proportional to diameter of the balloon. How many no. of moles of air added to change the pressure from 1 atm to 4 atm.
(a) 80
(b) 257
(c) 255
(d) 256

Solution. Answer: (c) 255. P ∝ d, so d = 4 m at 4 atm. V ∝ d3: V2 = 64V1. n ∝ PV: n2 = 1 × (4 × 64)/(1 × 1) = 256 mol. Moles added = 256 - 1 = 255.

Teacher's Note: Pressure quadruples and volume rises 43 = 64 times, so moles rise 256 times.

Exam Note: Answer is added moles: 256 - 1.

Question L2-8. If Pd v/s P (where P denotes pressure in atm and d denotes density in gm/L) is plotted for He gas (assume ideal) at a particular temperature. If [d/dP (Pd)]P = 8.21 atm = 5, then the temperature will be
(a) 160 K
(b) 320 K
(c) 80 K
(d) none of these

Solution. Answer: (a) 160 K. d = PM/RT, so Pd = P2M/RT and d(Pd)/dP = 2PM/RT. At P = 8.21 atm: 2 × 8.21 × 4/(0.0821 × T) = 5, so T = 65.68/(0.4105) = 160 K.

Teacher's Note: Differentiate Pd = P2M/RT with respect to P and substitute the given values.

Exam Note: Use M = 4 g/mol and R = 0.0821.

Question L2-9. What is the density of wet air with 75% relative humidity at 1 atm and 300 K? Given: vapour pressure of H2O is 30 torr and average molar mass of air is 29 g mol-1.
(a) 1.614 g/L
(b) 0.96 g/L
(c) 1.06 g/L
(d) 1.164 g/L

Solution. Answer: (d) 1.164 g/L. p(H2O) = 0.75 × 30 = 22.5 torr; p(dry air) = 760 - 22.5 = 737.5 torr. Density = Σ(pM)/RT = [(737.5/760) × 29 + (22.5/760) × 18]/(0.0821 × 300) = (28.14 + 0.53)/24.63 = 1.164 g/L.

Teacher's Note: Wet air is a mixture: add the density contributions of dry air and water vapour from their partial pressures.

Exam Note: Water vapour pressure is 75% of 30 torr.

Question L2-10. 7 moles of a tetra-atomic non-linear gas 'A' at 10 atm and T K are mixed with 6 moles of another gas B at T/3 K and 5 atm in a closed, rigid vessel without energy transfer with surroundings. If final temperature of mixture was 5T/6 K, then gas B is? (Assuming all modes of energy are active)
(a) monoatomic
(b) diatomic
(c) triatomic
(d) tetra atomic

Solution. Answer: (b) diatomic. No energy exchange: heat lost by A = heat gained by B. For tetra-atomic non-linear A (all modes active): Cv = (3/2)R + (3/2)R + (3N - 6)R = 1.5R + 1.5R + 6R = 9R. Heat lost by A = 7 × 9R × (T - 5T/6) = 10.5RT. Heat gained by B = 6 × Cv,B × (5T/6 - T/3) = 3Cv,BT. So Cv,B = 3.5R = (3/2)R + R + R, the value for a diatomic gas (translation, rotation, vibration all active).

Teacher's Note: Energy balance nACv,AΔTA = nBCv,BΔTB; compare Cv,B with 3.5R.

Exam Note: Fully active diatomic: Cv = 7R/2.

Question L2-11. Three closed rigid vessels, A, B and C without energy transfer with surroundings, which initially contain three different gases at different temperatures are connected by tube of negligible volume. The vessel A contain 2 mole Ne gas, at 300 K, vessel 'B' contain 2 mole SO2 gas at 400 K and vessel 'C' contain 3 mole CO2 gas at temperature 500 K. What is the final pressure (in atm) attained by gases when all valves of connecting three vessels are opened and additional 15.6 kcal heat supplied to vessel through valve. The volume of A, B and C vessel is 2, 2 and 3 litre respectively (figure: three vessels in a row, Ne, SO2, CO2, joined by valves). Given: R = 2 calorie/mol-K; Cv(Ne) = 3/2 R, Cv(CO) = 5/2 R and Cv(SO2) = 3R
(a) 73.89 atm
(b) 67.31 atm
(c) 80 atm
(d) none of these

Solution. Answer: (a) 73.89 atm. Using the given Cv values (the book's Cv = 5R/2 is applied to the CO2 in vessel C): Cv(Ne) = 3 cal/mol K, Cv(SO2) = 6, Cv(CO2) = 5. Heat balance: 15600 = Σ n Cv(Tf - Ti) = Tf(2 × 3 + 2 × 6 + 3 × 5) - (2 × 3 × 300 + 2 × 6 × 400 + 3 × 5 × 500) = 33Tf - 14100. Tf = 29700/33 = 900 K. Total n = 7 mol, V = 2 + 2 + 3 = 7 L: P = nRT/V = 7 × 0.0821 × 900/7 = 73.9 atm.

Teacher's Note: Heat supplied equals the sum of n Cv ΔT over all gases at constant volume; then PV = nRT.

Exam Note: Heat uses R = 2 cal; pressure uses 0.0821.

JEE Mathematics: Narendra Awasthi Solutions for Narendra Awasthi Solutions Physical Chemistry Chapter 3 Gaseous State Part 1

Download Narendra Awasthi Solutions for JEE

Review detailed solutions for JEE Mathematics. The Narendra Awasthi Solutions Physical Chemistry Chapter 3 Gaseous State Part 1 PDF provides comprehensive answers mapped to standard Narendra Awasthi Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for JEE Math

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Narendra Awasthi Solutions for JEE Chemistry?

They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Narendra Awasthi JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Narendra Awasthi solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Narendra Awasthi JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.