Official Narendra Awasthi Textbook Solutions: JEE Chemistry Chapter 01 Stoichiometry
Review structured textbook solutions for JEE Chemistry Chapter 01 Stoichiometry prepared by Narendra Awasthi. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Chapter-wise Solutions for Chemistry: Chapter 01 Stoichiometry
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Chapter 1 Stoichiometry - Problems in Chemistry, Level 2 (Q15 onward) and Level 3
Level 2
Question 2.15. H2O2 + 2KI (40% yield) → I2 + 2KOH; H2O2 + 2KMnO4 + 3H2SO4 (50% yield) → K2SO4 + 2MnSO4 + 3O2 + 4H2O. A 150 mL H2O2 sample was divided into two parts. The first part was treated with KI and the KOH formed required 200 mL of M/2 H2SO4 for neutralisation. The other part was treated with KMnO4, yielding 6.74 litre of O2 at 1 atm and 273 K. Using the % yield indicated, find the volume strength of the H2O2 sample used.
(a) 5.04 (b) 10.08 (c) 3.36 (d) 33.6
Solution. Moles of KOH = 0.2 (200 mL × 1 N). Moles of H2O2 in part 1 = (0.2/2) × (1/0.4) = 0.25. O2 produced = 6.74/22.4 = 0.3 mol; as per the equation as printed (1 mol H2O2 gives 3 mol O2) at 50% yield, H2O2 in part 2 = 0.3/(3 × 0.5) = 0.2 mol. Total H2O2 = 0.45 mol in 0.15 L, so M = 3 M and volume strength = 11.2 × 3 = 33.6 volumes. Answer: (d).
Teacher's Note: Divide the yield into the moles obtained to get moles reacted; then M × 11.2 gives volume strength.
Exam Note: Correct option (d) 33.6.
Question 2.16. SO2Cl2 (sulphuryl chloride) reacts with water to give a mixture of H2SO4 and HCl. What volume of 0.2 M Ba(OH)2 is needed to completely neutralise 25 mL of 0.2 M SO2Cl2 solution?
(a) 25 mL (b) 50 mL (c) 100 mL (d) 200 mL
Solution. SO2Cl2 + 2H2O → H2SO4 + 2HCl. 25 mL × 0.2 M = 5 m-mol, giving 5 m-mol H2SO4 and 10 m-mol HCl, i.e. 5 × 2 + 10 = 20 m-eq of H+. Ba(OH)2 has 0.2 × 2 = 0.4 m-eq/mL, so V = 20/0.4 = 50 mL. Answer: (b).
Teacher's Note: Count total H+ equivalents from both acids, then divide by the base normality.
Exam Note: Hydrolysis gives 2 HCl plus one H2SO4.
Question 2.17. 5 g sample contains only Na2CO3 and Na2SO4. The sample is dissolved and the volume made up to 250 mL; 25 mL of this solution neutralises 20 mL of 0.1 M H2SO4. Calculate the % of Na2SO4 in the sample.
(a) 42.4 (b) 57.6 (c) 36.2 (d) none of these
Solution. Only Na2CO3 reacts with H2SO4: Na2CO3 + H2SO4 → Na2SO4 + H2CO3. m-mol Na2CO3 in 25 mL = 20 × 0.1 = 2, so in 250 mL = 20 m-mol = 20 × 106 × 10-3 = 2.12 g. % Na2CO3 = 2.12/5 × 100 = 42.4, so % Na2SO4 = 100 − 42.4 = 57.6. Answer: (b).
Teacher's Note: Scale the aliquot to the full 250 mL; the inert salt is found by difference.
Exam Note: Do not report % Na2CO3 (42.4) by mistake.
Question 2.18. 20 mL of 0.2 M NaOH(aq) solution is mixed with 35 mL of 0.1 M NaOH(aq) solution and the resultant solution is diluted to 100 mL. 40 mL of this diluted solution reacted with 10% impure sample of oxalic acid (H2C2O4). The weight of the impure sample is:
(a) 0.15 gram (b) 0.135 gram (c) 0.59 gram (d) None of these
Solution. M of diluted NaOH = (20 × 0.2 + 35 × 0.1)/100 = 0.075 M. m-eq of NaOH = 40 × 0.075 = 3. Let the impure sample weigh x g; pure oxalic acid = 0.90x g (equivalent weight 90/2 = 45). 3 = 0.90x/45 × 1000, hence x = 0.15 g. Answer: (a).
Teacher's Note: Dilute first, then equate equivalents; correct for 10% impurity (90% pure).
Exam Note: Impure mass = pure mass ÷ 0.9.
Question 2.19. A silver coin weighing 11.34 g was dissolved in nitric acid. When sodium chloride was added to the solution all the silver (present as AgNO3) was precipitated as silver chloride. The weight of the precipitated silver chloride was 14.35 g. Calculate the percentage of silver in the coin.
(a) 4.8% (b) 95.2% (c) 90% (d) 80%
Solution. POAC on Ag: moles of Ag in the coin = moles of Ag in AgCl = 14.35/143.5 = 0.1 mol. Mass of Ag = 0.1 × 108 = 10.8 g. % silver = 10.8/11.34 × 100 = 95.2%. Answer: (b).
Teacher's Note: Silver is conserved: moles in AgCl equal moles in the coin (POAC).
Exam Note: Report silver as a % of the coin, not of AgCl.
Question 2.20. Two elements X (at mass 16) and Y (at mass 14) combine to form compounds A, B and C. The ratio of different masses of Y which combine with a fixed mass of X in A, B and C is 1 : 3 : 5. If 32 parts by mass of X combines with 84 parts by mass of Y in B, then in C, 16 parts by mass of X will combine with:
(a) 14 parts by mass of Y (b) 42 parts by mass of Y (c) 70 parts by mass of Y (d) 84 parts by mass of Y
Solution. For a fixed mass of X: 16 parts of X combine with 84/2 = 42 parts of Y in B. Y combining in B : C = 3 : 5, so in C, 16 parts of X combine with (5/3) × 42 = 70 parts of Y. Answer: (c).
Teacher's Note: Law of multiple proportions: fix the mass of X, then scale Y by the ratio.
Exam Note: First convert 32 parts of X to 16 parts.
Question 2.21. The conversion of oxygen to ozone occurs to the extent of 15% only. The mass of ozone that can be prepared from 67.2 L of oxygen at 1 atm and 273 K will be:
(a) 14.4 gm (b) 96 gm (c) 640 gm (d) 64 gm
Solution. Moles of O2 = 67.2/22.4 = 3. 3O2 → 2O3: moles of ozone formed = (2/3) × (15/100) × 3 = 0.3 mol. Mass of ozone = 0.3 × 48 = 14.4 g. Answer: (a).
Teacher's Note: Apply the 15% extent to moles of O2, then use the 3:2 mole ratio.
Exam Note: Ozone molar mass is 48, not 32.
Question 2.22. RH2 (ion exchange resin) can replace Ca2+ ions in hard water as RH2 + Ca2+ → RCa + 2H+. If 1 L of hard water after passing through RH2 has pH = 3 then hardness in parts per million of Ca2+ is:
(a) 20 (b) 10 (c) 40 (d) 100
Solution. [H+] = 10-3 M, so [Ca2+] = (1/2) × 10-3 M. Weight of Ca2+ per litre = (10-3/2) × 40 g. In 106 mL of water: (1/2) × 10-3 × 40 × 106/103 = 20 g, i.e. 20 ppm. Answer: (a).
Teacher's Note: Each Ca2+ releases 2 H+, so Ca2+ is half of [H+]; then convert to ppm.
Exam Note: Remember the factor 1/2 between H+ and Ca2+.
Question 2.23. 100 cm3 of a solution of an acid (molar mass = 98) containing 29.4 g of the acid per litre were completely neutralised by 90.0 cm3 of aq. NaOH containing 20 g of NaOH per 500 cm3. The basicity of the acid is:
(a) 3 (b) 2 (c) 1 (d) data insufficient
Solution. m-eq of acid = m-eq of base. N1V1 = N2V2: (29.4/98) × n × 100 = 90 × (20/40) × (1000/500), i.e. 0.3 n × 100 = 90 × 1. Hence n = 3. Answer: (a).
Teacher's Note: Equate m-equivalents; basicity is the n-factor of the acid.
Exam Note: Convert 20 g/500 cm3 NaOH to 1 M first.
Question 2.24. 20 mL of 0.1 M solution of compound Na2CO3·NaHCO3·2H2O is titrated against 0.05 M HCl, x mL of HCl is used when phenolphthalein is used as an indicator and y mL of HCl is used when methyl orange is the indicator in two separate titrations. Hence (y − x) is:
(a) 40 mL (b) 80 mL (c) 120 mL (d) None of these
Solution. With phenolphthalein only Na2CO3 → NaHCO3: 0.05x = 20 × 0.1 × 1, so x = 40 mL. With methyl orange both carbonate and bicarbonate go to H2CO3: 0.05y = 20 × 0.1 × 3, so y = 120 mL. y − x = 80 mL. Answer: (b).
Teacher's Note: Phenolphthalein sees one H+ per carbonate; methyl orange sees three H+ per formula unit.
Exam Note: Methyl orange total is 3 times; phenolphthalein is 1 times.
Question 2.25. A sample containing HAsO2 (mol. wt. = 108) and weighing 3.78 g is dissolved and diluted to 250 mL in a volumetric flask. A 50 mL sample (aliquot) is withdrawn with a pipet and titrated with 35 mL of 0.05 M solution of I2. Calculate the percentage HAsO2 in the sample:
(a) 25% (b) 20% (c) 10% (d) none of these
Solution. I2 + AsO2− + 2H2O → HAsO42− + 2I− + 3H+. m-eq of HAsO2 in 50 mL = m-eq of I2 = 35 × 0.05 × 2 = 3.5. In 250 mL: 3.5 × 250/50 = 17.5 m-eq. Weight = (17.5/2) × 108 × 10-3 = 0.945 g. % = 0.945/3.78 × 100 = 25%. Answer: (a).
Teacher's Note: Equivalents of I2 equal equivalents of HAsO2 (n = 2); scale the aliquot by 5.
Exam Note: Scale aliquot to 250 mL before computing %.
Question 2.26. A mixture of FeO and Fe2O3 is completely reacted with 100 mL of 0.25 M acidified KMnO4 solution. The resultant solution was then titrated with Zn dust which converted Fe3+ of the solution to Fe2+. The Fe2+ required 1000 mL of 0.10 M K2Cr2O7 solution. Find out the weight % Fe2O3 in the mixture.
(a) 80.85 (b) 19.15 (c) 50 (d) 89.41
Solution. m-mol FeO (n = 1) = 0.25 × 100 × 5 = 125. Total Fe2+ after Zn = 1000 × 0.1 × 6 = 600 m-mol. Fe2+ from Fe2O3 = 600 − 125 = 475 m-mol, so m-mol Fe2O3 = 475/2. Weight of FeO = 125 × 72/1000 = 9 g; weight of Fe2O3 = (475/2) × 160/1000 = 38 g. % Fe2O3 = 38/47 × 100 = 80.85. Answer: (a).
Teacher's Note: Zn reduces all Fe to Fe2+, so total Fe2+ minus FeO gives iron from Fe2O3.
Exam Note: Each Fe2O3 gives two Fe2+; divide by 2.
Question 2.27. To a 10 mL, 1 M aqueous solution of Br2, excess of NaOH is added so that all Br2 is disproportionated to Br− and BrO3−. The resulting solution is free from Br−, by extraction and excess of OH− neutralised by acidifying the solution. The resulting solution is sufficient to react with 2 g of impure CaC2O4 (M = 128 g/mol) sample. The % purity of oxalate sample is:
(a) 85.3% (b) 12.5% (c) 90% (d) 64%
Solution. 3Br2 + 6OH− → 5Br− + BrO3− + 3H2O. 10 m-mol Br2 gives 10/3 m-mol BrO3−. 6H+ + BrO3− + 3C2O42− → Br− + 6CO2 + 3H2O, so required oxalate = (10/3) × 3 = 10 m-mol, i.e. 10 × 10-3 × 128 = 1.28 g. % purity = 1.28/2 × 100 = 64%. Answer: (d).
Teacher's Note: Disproportionation gives only 1/6 of Br2 as bromate; bromate oxidises 3 oxalate each.
Exam Note: Track the 1/6 yield of BrO3- from Br2.
Question 2.28. 0.10 g of a sample containing CuCO3 and some inert impurity was dissolved in dilute sulphuric acid and volume made up to 50 mL. This solution was added into 50 mL of 0.04 M KI solution where copper precipitates as CuI and I− is oxidised into I3−. A 10 mL portion of this solution is taken for analysis, filtered and made up free I3− and then treated with excess of acidic permanganate solution. Liberated iodine required 20 mL of 2.5 mM sodium thiosulphate solution to reach the end point. Determine weight percentage of CuCO3 in the original sample.
(a) 7.41 (b) 74.1 (c) 61.75 (d) None of these
Solution. m-mol of KI = 50 × 0.04 = 2. m-eq of thiosulphate in 10 mL = 20 × 2.5 × 10-3 = 50 × 10-3; m-eq of unreacted I− in 100 mL (as printed) = 50 × 10-3 × 100/10 = 0.5 m-mol. I− reacted with CuCO3 = 2 − 0.5 = 1.5 m-mol. 2Cu2+ + 5I− → 2CuI + I3−, so m-mol Cu2+ = (2/5) × 1.5 = 0.6. Weight of CuCO3 = 0.6 × 10-3 × 123.5 = 0.0741 g. Weight % = 0.0741/0.1 × 100 = 74.1. Answer: (b).
Teacher's Note: Back-calculate unreacted iodide from thiosulphate; copper consumed 2 per 5 iodide.
Exam Note: Scale the 10 mL aliquot to the full solution.
Question 2.29. 1 mole of equimolar mixture of ferric oxalate and ferrous oxalate will require x mole of KMnO4 in acidic medium for complete oxidation, x is:
(a) 0.5 mole (b) 0.9 mole (c) 1.2 mole (d) 4.5 mole
Solution. Fe2(C2O4)3 + MnO4− + H+ → 2Fe3+ + 6CO2 + Mn2+ (n = 6); FeC2O4 + MnO4− + H+ → Fe3+ + 2CO2 + Mn2+ (n = 3). Total equivalents = 0.5 × 6 + 0.5 × 3 = 4.5 = x × 5, so x = 0.9 mol. Answer: (b).
Teacher's Note: Ferric oxalate loses 6 e per mole, ferrous oxalate 3 e; divide by 5 for KMnO4.
Exam Note: Ferrous oxalate loses Fe and oxalate electrons: n = 3.
Question 2.30. An impure sample of sodium oxalate (Na2C2O4) weighing 0.20 g is dissolved in aqueous solution of H2SO4 and solution is titrated at 70°C, requiring 45 mL of 0.02 M KMnO4 solution. The end point is overrun, and back titration is carried out with 10 mL of 0.1 M oxalic acid solution. Find the % purity of Na2C2O4 in sample:
(a) 75 (b) 83.75 (c) 90.25 (d) None of these
Solution. Total m-eq of KMnO4 = 45 × 0.02 × 5 = 4.5. m-eq of KMnO4 consumed by the back-titrant oxalic acid = 10 × 0.1 × 2 = 2. m-eq reacted with Na2C2O4 = 4.5 − 2 = 2.5 = (W/134) × 2 × 1000, so W = 0.1675 g. % purity = 0.1675/0.2 × 100 = 83.75. Answer: (b).
Teacher's Note: In an overrun titration subtract the back-titration equivalents from the total KMnO4 equivalents.
Exam Note: Subtract back-titre equivalents before finding oxalate.
Question 2.31. 0.5 g mixture of K2Cr2O7 and KMnO4 was treated with excess of KI in acidic medium. Iodine liberated required 150 cm3 of 0.10 N thiosulphate solution for titration. Find the percentage of K2Cr2O7 in the mixture:
(a) 14.64 (b) 34.2 (c) 65.69 (d) 50
Solution. Equivalent weight of K2Cr2O7 = 294/6 = 49; of KMnO4 = 158/5 = 31.6. Let mass of K2Cr2O7 = x g: x/49 + (0.5 − x)/31.6 = 150 × 0.1 × 10-3 = 0.015, giving x = 0.0732 g. % = 0.0732/0.5 × 100 = 14.64. Answer: (a).
Teacher's Note: Both oxidants liberate iodine in equivalent amount; set up one equation in equivalents.
Exam Note: Use equivalent weights 49 and 31.6.
Question 2.32. A 150 mL of solution of I2 is divided into two unequal parts. I part reacts with hypo solution in acidic medium. 15 mL of 0.4 M hypo was consumed. II part was added with 100 mL of 0.3 M NaOH solution. Residual base required 10 mL of 0.3 M H2SO4 solution for complete neutralisation. What was the initial concentration of I2?
(a) 0.08 M (b) 0.1 M (c) 0.2 M (d) None of these
Solution. I2 + 2Na2S2O3 → 2NaI + Na2S4O6: m-mol hypo = 15 × 0.4 = 6, so I2 = 3 m-mol. 3I2 + 6NaOH → 5NaI + NaIO3 + 3H2O: NaOH taken = 100 × 0.3 = 30 m-mol; residual NaOH = 2 × (10 × 0.3) = 6 m-mol; NaOH consumed = 30 − 6 = 24 m-mol, so I2 = 24/2 = 12 m-mol. Total I2 = 3 + 12 = 15 m-mol, so M = 15/150 = 0.1 M. Answer: (b).
Teacher's Note: Count I2 from both parts: hypo titration (1:2) and NaOH disproportionation; divide by 150 mL.
Exam Note: Add I2 from both parts before dividing by total volume.
Question 2.33. A mixture of H2SO4 and H2C2O4 (oxalic acid) and some inert impurity weighing 3.185 g was dissolved in water and the solution made up to 1 litre. 10 mL of this solution required 3 mL of 0.1 N NaOH for complete neutralisation. In another experiment 100 mL of the same solution in hot condition required 4 mL of 0.02 M KMnO4 solution for complete reaction. The wt. % of H2SO4 in the mixture was:
(a) 40 (b) 50 (c) 60 (d) 80
Solution. Let x and y be m-mol of H2SO4 and H2C2O4 in 10 mL. Both are dibasic: (x + y) × 2 = 3 × 0.1 × 1000/10, so x + y = 15. In the second experiment only oxalic acid reacts with KMnO4: y × 2 = 4 × 0.02 × 5 × 1000/100, so y = 2. Hence x = 13 m-mol, weight of H2SO4 = 13 × 10-3 × 98 = 1.274 g. Wt. % = 1.274/3.185 × 100 = 40%. Answer: (a).
Teacher's Note: Neutralisation counts both acids; permanganate reacts with oxalic acid only, separating the two.
Exam Note: Use KMnO4 to isolate oxalic acid, then subtract.
Question 2.34. During developing of an exposed camera film, one step involves the following reaction: HO–C6H4–OH (quinol, p-hydroquinone) + 2AgBr + 2OH− → O=C6H4=O (p-benzoquinone) + 2Ag + 2H2O + 2Br−. Which of the following best describes the role of quinol?
(a) It acts as an acid (b) It acts as reducing agent (c) It acts as oxidant (d) It acts as a base
Solution. Quinol (hydroquinone) is converted to quinone (loses 2H, i.e. 2 e−) while Ag+ of AgBr is reduced to Ag. Quinol is therefore oxidised and acts as a reducing agent. Answer: (b).
Teacher's Note: Silver is reduced to Ag, so the species that reduces it, quinol, is the reductant.
Exam Note: Identify who loses electrons: Ag+ is reduced.
Question 2.35. The concentration of oxalic acid is 'x' mol litre-1. 40 mL of this solution reacts with 16 mL of 0.05 M acidified KMnO4. What is the pH of 'x' M oxalic acid solution? (Assume that oxalic acid dissociates completely.)
(a) 1.3 (b) 1.699 (c) 1 (d) 2
Solution. KMnO4 (n = 5) + C2O42− (n = 2) → Mn2+ + CO2. m-eq of oxalic acid = m-eq of KMnO4: 2(40)x = 5 × 16 × 0.05, so x = 0.05 M. Complete dissociation gives [H+] = 2x = 0.1 M, so pH = 1. Answer: (c).
Teacher's Note: Find x by redox equivalents, then double it for H+ from a dibasic acid.
Exam Note: pH uses 2x, not x.
Level 3
Passage 1 (Oleum)
Question 3.P1.1.
Passage 1. Oleum is considered as a solution of SO3 in H2SO4, which is obtained by passing SO3 in solution of H2SO4. When 100 g sample of oleum is diluted with desired weight of H2O then the total mass of H2SO4 obtained after dilution is known as % labelling in oleum. For example, a bottle labelled '109% H2SO4' means the 109 g total mass of pure H2SO4 will be formed when 100 g of oleum is diluted by 9 g of H2O which combines with all the free SO3 present in oleum to form H2SO4 as SO3 + H2O → H2SO4.
What is the % of free SO3 in an oleum that is labelled as '104.5% H2SO4'?(a) 10 (b) 20 (c) 40 (d) None of these
Solution. H2O + SO3 → H2SO4: 18 g water combines with 80 g SO3. 4.5 g H2O combines with 20 g SO3, so 100 g oleum contains 20 g SO3 = 20% free SO3. Answer: (b).
Teacher's Note: Label minus 100 is the water absorbed; scale by 80/18 to get free SO3.
Exam Note: Water gained (4.5 g) times 80/18.
Question 3.P1.2. 9.0 g water is added into oleum sample labelled as "112%" H2SO4 then the amount of free SO3 remaining in the solution is: (STP = 1 atm and 273 K)
(a) 14.93 L at STP (b) 7.46 L at STP (c) 3.73 L at STP (d) 11.2 L at STP
Solution. Per 100 g oleum, free SO3 = 12 × 80/18 g, i.e. 12/18 = 2/3 mol (water that can combine with SO3). Water added 9 g = 9/18 = 1/2 mol combines with 1/2 mol SO3. SO3 remaining = 2/3 − 1/2 = 1/6 mol. Volume at STP = (1/6) × 22.4 = 3.73 L. Answer: (c).
Teacher's Note: Free SO3 moles equal moles of water needed (12/18); subtract the moles of water added.
Exam Note: Convert remaining moles with 22.4 L/mol.
Question 3.P1.3. If excess water is added into a bottle sample labelled as "112% H2SO4" and is reacted with 5.3 g Na2CO3, then find the volume of CO2 evolved at 1 atm pressure and 300 K temperature after the completion of the reaction:
(a) 2.46 L (b) 24.6 L (c) 1.23 L (d) 12.3 L
Solution. Na2CO3 + H2SO4 → Na2SO4 + H2O + CO2. Moles of CO2 = moles of Na2CO3 reacted = 5.3/106 = 0.05 (sulphuric acid is in excess). Volume at 1 atm, 300 K = 0.05 × 24.63 = 1.23 L. Answer: (c).
Teacher's Note: Na2CO3 is limiting; use V = nRT/P at 300 K, not 22.4 L.
Exam Note: Use molar volume at 300 K (24.6 L).
Question 3.P1.4. 1 g of oleum sample is diluted with water. The solution required 54 mL of 0.4 N NaOH for complete neutralisation. The % of free SO3 in the sample is:
(a) 74 (b) 26 (c) 20 (d) None of these
Solution. Let x g H2SO4 and (1 − x) g SO3 be present. Eq. of H2SO4 + eq. of SO3 (as H2SO4) = eq. of NaOH: (x/98) × 2 + ((1 − x)/80) × 2 = 54 × 0.4 × 10-3, giving x = 0.74. % free SO3 = (1 − 0.74)/1 × 100 = 26%. Answer: (b).
Teacher's Note: Both H2SO4 and SO3 (after hydration) neutralise 2 eq/mol; solve for x.
Exam Note: Report SO3 (26%), not H2SO4 (74%).
Passage 2 (H2O2 strength)
Question 3.P2.1. The strength of H2O2 is expressed in several ways like molarity, normality, % (w/V), volume strength, etc. "10 V" means 1 volume of H2O2 on decomposition gives 10 volumes of oxygen at 1 atm and 273 K, i.e. 1 litre of H2O2 gives 10 litre of O2 at 1 atm and 273 K. Decomposition: H2O2(aq) → H2O(l) + ½O2(g). H2O2 acts both as an oxidising and a reducing agent, with n-factor 2 in both cases, so normality = 2 × molarity.
What is the molarity of "11.2 V" of H2O2?
(a) 1 M (b) 2 M (c) 5.6 M (d) 11.2 M
Solution. 1 litre of H2O2(aq) provides 11.2 L of O2 at STP, i.e. 11.2/22.4 = 0.5 mol O2. n(H2O2) = 0.5 × 2 = 1 mol, so M = 1 M. Answer: (a).
Teacher's Note: Each mole of O2 comes from two moles of H2O2: 11.2 V is 1 M.
Exam Note: Mole ratio H2O2 : O2 = 2 : 1.
Question 3.P2.2. What is the percentage strength (% w/V) of "11.2 V" H2O2?
(a) 1.7 (b) 3.4 (c) 34 (d) None of these
Solution. Strength in percentage means how many grams of H2O2 are present per 100 mL. M = 1 and mol. wt. of H2O2 = 34, so 34 g H2O2 is present per litre, i.e. 3.4 g per 100 mL. Answer: (b).
Teacher's Note: Molarity times molar mass gives g/L; divide by 10 for % w/V.
Exam Note: % w/V is grams per 100 mL.
Question 3.P2.3. 20 mL of H2O2 solution is reacted with 80 mL of 0.05 M KMnO4 in acidic medium then what is the volume strength of H2O2?
(a) 2.8 (b) 5.6 (c) 11.2 (d) None of these
Solution. m-eq of H2O2 = m-eq of KMnO4: 20 × N = 0.05 × 5 × 80, so N = 1. Volume strength = 5.6 × N = 5.6. Answer: (b).
Teacher's Note: Equate equivalents (KMnO4 n = 5) to find normality; volume strength = 5.6 × N.
Exam Note: Volume strength = 5.6 × normality.
Question 3.P2.4. 40 g Ba(MnO4)2 (mol. wt. = 375) sample containing some inert impurities in acidic medium is completely reacted with 125 mL of "33.6 V" of H2O2. What is the percentage purity of the sample?
(a) 28.12% (b) 70.31% (c) 85% (d) None of these
Solution. m-eq of Ba(MnO4)2 = m-eq of H2O2. For "33.6 V": M = 33.6/11.2 = 3, N = 6. (w/375) × 10 × 1000 = 6 × 125 (i.e. 3 × 125 × 2), so w = 28.125 g. % purity = 28.125/40 × 100 = 70.31. Answer: (b).
Teacher's Note: Ba(MnO4)2 has n = 10; convert 33.6 V to N = 6 first.
Exam Note: Ba(MnO4)2 n-factor is 10 (two Mn).
Passage 3 (Hardness of water)
Question 3.P3.1. Hardness of water is measured in terms of ppm of CaCO3; 100 ppm means 100 g of CaCO3 is present in 106 g of H2O. One litre of a sample of hard water (d = 1 g/mL) contains 136 mg of CaSO4 and 190 mg of MgCl2. What is the total hardness of water in terms of CaCO3?
(a) 100 ppm (b) 200 ppm (c) 300 ppm (d) None of these
Solution. 136 mg CaSO4 ≡ 100 mg CaCO3; 190 mg MgCl2 ≡ 2 × 100 = 200 mg CaCO3. One litre (1000 g) of water contains 300 mg CaCO3, so 106 g contains (300 × 10-3/1000) × 106 = 300 ppm. Answer: (c).
Teacher's Note: Convert each salt to its CaCO3 equivalent (same moles) and add.
Exam Note: Hardness is expressed as CaCO3 equivalents, in ppm.
Question 3.P3.2. What is the weight of Ca(OH)2 required for 10 litre of water to remove temporary hardness of 100 ppm due to Ca(HCO3)2? (Ca(HCO3)2 + Ca(OH)2 → 2CaCO3↓ + 2H2O)
(a) 1.62 g (b) 0.74 g (c) 7.4 g (d) None of these
Solution. 106 g water contains 100 g CaCO3; 10 L or 104 g water contains 1 g CaCO3, i.e. 1 g ≡ 1.62 g Ca(HCO3)2 (100 g CaCO3 ≡ 162 g) = 0.01 mol. Ca(OH)2 required = 0.01 mol = 0.74 g. Answer: (b).
Teacher's Note: Hardness as CaCO3 gives moles of Ca(HCO3)2; lime reacts 1:1.
Exam Note: Moles of lime equal moles of bicarbonate.
Question 3.P3.3. A 200 g sample of hard water is passed through the column of cation exchange resin, in which H+ is exchanged by Ca2+. The outlet water of column required 50 mL of 0.1 M NaOH for complete neutralisation. What is the hardness of Ca2+ ion in ppm?
(a) 250 ppm (b) 500 ppm (c) 750 ppm (d) 1000 ppm
Solution. m-moles of H+ in outlet water = 50 × 0.1 = 5. m-moles of Ca2+ = 5/2 = 2.5 (1 Ca2+ replaced by 2H+), i.e. 2.5 × 40 = 100 mg. 200 g of hard water contains 100 mg Ca2+, so 106 g contains (100/200) × 106 × 10-3 = 500 ppm. Answer: (b).
Teacher's Note: Each Ca2+ releases two H+; titrated H+ gives Ca2+ by halving.
Exam Note: ppm is mg per 1000 g water.
Passage 4 (n-factor and equivalent weight)
Question 3.P4.1. n-factor of Ba(MnO4)2 in acidic medium is:
(a) 2 (b) 6 (c) 10 (d) None of these
Solution. In acidic medium MnO4− → Mn2+ (n = 5). Ba(MnO4)2 has two MnO4−, so n-factor = 5 × 2 = 10. Answer: (c).
Teacher's Note: Count electrons gained per formula unit: two Mn atoms, 5 e- each.
Exam Note: Multiply 5 by the number of Mn atoms.
Question 3.P4.2. For the reaction H3PO2 + NaOH → NaH2PO2 + H2O, what is the equivalent weight of H3PO2? (mol. wt. is M)
(a) M (b) M/2 (c) M/3 (d) None of these
Solution. H3PO2 is a monobasic acid, so n-factor = 1 and equivalent weight = M. Answer: (a).
Teacher's Note: Only one H in H3PO2 is acidic (it is bonded to O); n = 1.
Exam Note: H3PO2 is monobasic, not tribasic.
Question 3.P4.3. For the reaction Fe0.95O (molar mass: M) → Fe2O3, what is the eq. wt. of Fe0.95O?
(a) M/0.85 (b) M/0.95 (c) M/0.8075 (d) None of these
Solution. Fe0.95O contains Fe2+ and Fe3+: let Fe3+ = y, then the total charge must be 2 for O: 3y + 2(0.95 − y) = 2, giving y = 0.1. Fe2+ = 0.85 per formula unit, which is oxidised to Fe3+: n-factor = 0.85 (as printed, n = (3 − 2/0.95) × 0.95 = 0.85). Hence E = M/0.85. Answer: (a).
Teacher's Note: Only Fe2+ present in the nonstoichiometric oxide is oxidised: 0.85 e- per formula unit.
Exam Note: Compute oxidation states first, then n-factor.
Question 3.P4.4. In the reaction xVO + yFe2O3 → FeO + V2O5, what is the value of x and y respectively?
(a) 1, 1 (b) 2, 3 (c) 3, 2 (d) None of these
Solution. n-factor of VO = 3 (V2+ → V5+); n-factor of Fe2O3 = 1 × 2 = 2. The molar ratio is the reciprocal of the n-factor ratio, so x : y = 2 : 3, i.e. x = 2, y = 3. Answer: (b).
Teacher's Note: Mole ratio of reactants is the inverse ratio of n-factors.
Exam Note: Ratio of moles = inverse of n-factor ratio.
Passage 5 (Chlorine reaction series)
Question 3.P5.1. Consider the following series of reactions: Cl2 + 2NaOH → NaCl + NaClO + H2O; 3NaClO → 2NaCl + NaClO3; 4NaClO3 → 3NaClO4 + NaCl. How much Cl2 is required to prepare 122.5 g of NaClO4 by above sequencial reactions?
(a) 284 g (b) 213 g (c) 142 g (d) 71 g
Solution. 122.5 g NaClO4 = 1 mol, which needs 4/3 mol NaClO3, which needs 4 mol NaClO, which needs 4 mol Cl2 = 4 × 71 = 284 g. Answer: (a). (Answer from key; the steps are worked here.)
Teacher's Note: Work backwards through the three steps, multiplying mole ratios: 3/4, then 3/1.
Exam Note: Chain the mole ratios backwards from NaClO4.
Question 3.P5.2. How many mole of total NaCl formed by using 1 mole Cl2 & other reagents in excess?
(a) 1/12 mole (b) 1.67 mole (c) 1.75 mole (d) 0.75 mole
Solution. Step 1: 1 mol Cl2 gives 1 mol NaCl + 1 mol NaClO. Step 2: 1 mol NaClO gives 2/3 mol NaCl + 1/3 mol NaClO3. Step 3: 1/3 mol NaClO3 gives (1/3)(1/4) = 1/12 mol NaCl. Total NaCl = 1 + 2/3 + 1/12 = 1.75 mol. Answer: (c). (Answer from key; steps worked here.)
Teacher's Note: NaCl forms in all three steps; add the contributions 1, 2/3 and 1/12.
Exam Note: Do not forget NaCl from every step.
Question 3.P5.3. How many mole of NaClO3 obtained after the completion of reaction by taking 1 mole Cl2 & other reagents in excess?
(a) 1/3 mole (b) Zero (c) 1/4 mole (d) 1 mole
Solution. NaClO3 is an intermediate: all of it (1/3 mol) is consumed in the third step to give NaClO4 and NaCl when reagents are in excess. Net NaClO3 left = 0. Answer: (b). (Answer from key; reasoning given here.)
Teacher's Note: Intermediate formed in step 2 is fully consumed in step 3 under complete reaction.
Exam Note: Complete reaction leaves no intermediate NaClO3.
One or More Answers is/are Correct
Question 3.OM.1. 1 g atom of nitrogen represents:
(a) 6.02 × 1023 N2 molecules
(b) 22.4 litre of N2 at 1 atm and 273 K
(c) 11.2 litre of N2 at 1 atm and 273 K
(d) 14 g of nitrogen
Solution. Answer (from key): (c), (d). 1 g atom of N = 1 mol of N atoms = 14 g = 0.5 mol of N2 molecules = 3.01 × 1023 N2 molecules, which occupy 11.2 L at STP. So (c) and (d) are correct; (a) and (b) correspond to 1 mol of N2.
Teacher's Note: 1 g atom is one mole of atoms, so half a mole of N2 molecules.
Exam Note: Atoms versus molecules: halve for N2.
Question 3.OM.2. 1 g molecule of V2O5 contains:
(a) 5 mole of oxygen atom
(b) 2 mole of V atom
(c) 1 mole of oxygen atom
(d) 2.5 mole of oxygen atom
Solution. Answer (from key): (a), (b). 1 g molecule = 1 mol of V2O5, which contains 2 mol V atoms and 5 mol O atoms.
Teacher's Note: One mole of formula units: multiply subscripts to get moles of atoms.
Exam Note: Read subscripts as mole ratios.
Question 3.OM.3. Select dimensionless quantity(ies):
(a) vapour density
(b) molality
(c) specific gravity
(d) mass fraction
Solution. Answer (from key): (a), (c), (d). Vapour density, specific gravity and mass fraction are ratios of like quantities and have no units. Molality (mol/kg) has units.
Teacher's Note: Ratios of like quantities are dimensionless; molality has mol/kg units.
Exam Note: Ratio-type quantities have no unit.
Question 3.OM.4. Which of the following concentration terms is affected by a change in temperature?
(a) Molarity
(b) Molality
(c) Normality
(d) Specific gravity
Solution. Answer (from key): (a), (c), (d). Molarity and normality use volume of solution, which changes with temperature; specific gravity depends on density, which changes with temperature. Molality uses mass of solvent, which is temperature independent.
Teacher's Note: Volume-based terms change with temperature; mass-based terms do not.
Exam Note: Molality is the temperature-independent term.
Question 3.OM.5. Which of the following statements regarding the compound AxBy is/are correct?
(a) 1 mole of AxBy contains 1 mole of A and 1 mole B
(b) 1 equivalent of AxBy contains 1 equivalent of A and 1 equivalent of B
(c) 1 mole of AxBy contains x moles of A and y moles of B
(d) equivalent weight of AxBy = equivalent weight of A + equivalent weight of B
Solution. Answer (from key): (b), (c), (d). (a) is wrong; 1 mole of AxBy contains x mol A and y mol B (c). By the law of equivalents, 1 equivalent of the compound contains 1 equivalent of each constituent (b), so E(AxBy) = E(A) + E(B) (d).
Teacher's Note: Compounds combine equivalent for equivalent, so equivalent weights add.
Exam Note: Moles follow subscripts; equivalents are 1 : 1.
Question 3.OM.6. 1 mole of Ba(OH)2 will exactly neutralize:
(a) 0.5 mole HCl
(b) 1 mole of H2SO4
(c) 1 mole of H3PO3
(d) 2 mole of H3PO2
Solution. Answer (from key): (b), (c), (d). 1 mol Ba(OH)2 = 2 equivalents. 1 mol H2SO4 = 2 eq; 1 mol H3PO3 (dibasic) = 2 eq; 2 mol H3PO2 (monobasic) = 2 eq. 0.5 mol HCl is only 0.5 eq, so (a) is wrong.
Teacher's Note: Match 2 equivalents of base with 2 equivalents of acid; check basicity.
Exam Note: H3PO3 is dibasic; H3PO2 is monobasic.
Question 3.OM.7. The pair of species having different percentage (mass) of carbon is:
(a) CH3COOH and C6H12O6
(b) CH3COOH and C2H5OH
(c) HCOOCH3 and HCOOH
(d) C2H5OH and CH3OCH3
Solution. Answer (from key): (b), (c). Species with the same empirical formula have the same % C: (a) both CH2O; (d) both are C2H6O isomers. In (b) the % C are 40 and 52.2; in (c) HCOOCH3 (C2H4O2, 40%) and HCOOH (CH2O2, 26.1%) differ.
Teacher's Note: Same empirical formula means same mass percentages.
Exam Note: Compare empirical formulas, not molecular formulas.
Question 3.OM.8. 30 mL of CH3OH (d = 0.8 g/cm3) is mixed with 60 mL of C2H5OH (d = 0.92 g/cm3) at 25°C to form a solution of density 0.88 g/cm3. Select the correct option:
(a) Molarity and molality of resulting solution are 6.33 and 13.59 respectively
(b) The mole fraction of solute and molality are 0.385 and 13.59 respectively
(c) Molarity and % change in volume are 13.59 and zero respectively
(d) Mole fraction of solvent and molality are 0.615 and 13.59 respectively
Solution. Answer (from key): (b), (d). CH3OH (solute): 24 g = 0.75 mol; C2H5OH (solvent): 55.2 g = 1.2 mol. Mass of solution = 79.2 g; volume = 79.2/0.88 = 90 mL (zero change). Molality = 0.75/0.0552 = 13.59; mole fraction of solute = 0.75/1.95 = 0.385; of solvent = 0.615; molarity = 0.75/0.09 = 8.33. So (b) and (d).
Teacher's Note: Take methanol as solute; molality uses solvent mass, molarity uses total volume.
Exam Note: Molarity (8.33) and molality (13.59) are different.
Question 3.OM.9. Which of the following is/are correct for 17 g/L of H2O2 solution?
(a) Volume strengths is 5.6 at 273 K and 1 atm
(b) Molarity of solution is 0.5 M
(c) 1 mL of this solution gives 2.8 mL O2 at 273 K and 2 atm
(d) The normality of solution is 2 N
Solution. Answer (from key): (a), (b), (c). 17 g/L = 0.5 M (b); normality = 1 N, so (d) is wrong. Volume strength = 5.6 × 1 = 5.6 (a): 1 mL gives 5.6 mL O2 at STP, and at 2 atm 273 K this is 2.8 mL (c).
Teacher's Note: 0.5 M gives 0.25 mol O2 per litre, i.e. 5.6 V.
Exam Note: Normality = 2 × molarity = 1 N here.
Question 3.OM.10. Solutions containing 23 g HCOOH is/are:
(a) 46 g of 70% (w/V) HCOOH (dsolution = 1.40 g/mL)
(b) 50 g of 10 M HCOOH (dsolution = 1 g/mL)
(c) 50 g of 25% (w/w) HCOOH
(d) 46 g of 5 M HCOOH (dsolution = 1 g/mL)
Solution. Answer (from key): (a), (b). 23 g HCOOH = 0.5 mol. (a) 46 g solution = 32.9 mL, containing 0.7 × 32.9 = 23 g. (b) 50 g = 50 mL of 10 M = 0.5 mol = 23 g. (c) 25% w/w of 50 g = 12.5 g. (d) 46 mL × 5 M = 0.23 mol = 10.6 g. So (a) and (b).
Teacher's Note: Convert each description to grams of HCOOH using its own concentration unit.
Exam Note: Check w/V versus w/w and use density.
Question 3.OM.11. A sample of H2O2 solution labelled as "28 volume" has density of 265 g/L. Mark the correct option(s) representing concentration of same solution in other units:
(a) MH2O2 = 2.5
(b) % w/V = 17
(c) Mole fraction of H2O2 = 0.2
(d) mH2O2 = 13.88
Solution. Answer: (a), (c), (d). Vstrength = 28, so M = 28/11.2 = 2.5 (a). 1 L contains 2.5 mol = 85 g H2O2; weight of 1 L solution = 265 g, so water = 180 g = 10 mol. xH2O2 = 2.5/12.5 = 0.2 (c). % w/V = 2.5 × 34/1000 × 100 = 8.5, so (b) is wrong. m = (2.5/180) × 1000 = 13.88 (d).
Teacher's Note: Volume strength gives M; density gives solvent mass for molality and mole fraction.
Exam Note: % w/V is 8.5, not 17.
Question 3.OM.12. A mixture of 100 mL of CO, CO2 and O2 was sparked. When the resulting gaseous mixture was passed through KOH solution, contraction in volume was found to be 80 mL, the composition of initial mixture may be (in the same order):
(a) 30 mL, 60 mL, 10 mL
(b) 30 mL, 50 mL, 20 mL
(c) 50 mL, 30 mL, 20 mL
(d) 20 mL, 70 mL, 10 mL
Solution. Answer (from key): (a), (b). Contraction on KOH = total CO2 after sparking = 80 mL. 2CO + O2 → 2CO2. (a) 10 mL O2 converts 20 mL CO: CO2 = 60 + 20 = 80 ✓. (b) 20 mL O2 is more than enough for 30 mL CO (needs 15): CO2 = 50 + 30 = 80 ✓. (c) CO2 = 30 + 40 = 70 ✗. (d) CO2 = 70 + 20 = 90 ✗.
Teacher's Note: Total CO2 after sparking must be 80 mL; check which reagent is limiting.
Exam Note: Find limiting reagent between CO and O2 in each option.
Question 3.OM.13. If 1 mole of H3PO4 is reacted with 1 mole of X(OH)2 as: H3PO4 + X(OH)2 → XHPO4 + 2H2O then:
(a) The equivalent weight of base is mol. wt./2
(b) The eq. wt. of H3PO4 is 98/3
(c) The resulting solution is required 1 mole NaOH for complete neutralisation
(d) Minimum 1 mole of X(OH)2 is required for complete neutralisation of XHPO4
Solution. Answer (from key): (a), (c). X(OH)2 furnishes 2 OH−, so E = M/2 (a). Here H3PO4 gives 2 H+, so E = 98/2 = 49, not 98/3 (b). XHPO4 still has one replaceable H, so it needs 1 mol NaOH (c). To neutralise XHPO4 fully (2XHPO4 + X(OH)2 → X3(PO4)2 + 2H2O) only 0.5 mol X(OH)2 per mole is needed, so (d) is wrong.
Teacher's Note: n-factor depends on H+ actually replaced in this reaction, not total basicity.
Exam Note: n-factor of H3PO4 here is 2, not 3.
Question 3.OM.14. Dichromate ion in acidic medium oxidizes stannous ion as: xSn2+ + yCr2O72− + zH+ → aSn4+ + bCr3+ + cH2O
(a) the value of x : y is 1 : 3
(b) the value of x + y + z is 18
(c) a : b is 3 : 2
(d) the value of z − c is 7
Solution. Answer (from key): (b), (c), (d). Balanced: 3Sn2+ + Cr2O72− + 14H+ → 3Sn4+ + 2Cr3+ + 7H2O. So x : y = 3 : 1 (a wrong); x + y + z = 3 + 1 + 14 = 18 (b); a : b = 3 : 2 (c); z − c = 14 − 7 = 7 (d).
Teacher's Note: Balance by electrons: each Sn loses 2, each dichromate gains 6.
Exam Note: Check electron balance first, then H and O.
Question 3.OM.15. When an equimolar mixture of Cu2S and CuS is titrated with Ba(MnO4)2 in acidic medium, the final products contains Cu2+, SO2 and Mn2+. If the mol. wt. of Cu2S, CuS and Ba(MnO4)2 are M1, M2 and M3 respectively then:
(a) eq. wt. of Cu2S is M1/8
(b) eq. wt. of CuS is M2/6
(c) eq. wt. of Ba(MnO4)2 is M3/5
(d) Cu2S and CuS both have same equivalents in mixture
Solution. Answer (from key): (a), (b). Cu2S: 2Cu+ → 2Cu2+ (2 e−) and S2− → S4+ (6 e−): n = 8, E = M1/8 (a). CuS: Cu2+ unchanged, S2− → S4+: n = 6, E = M2/6 (b). Ba(MnO4)2 has two Mn, n = 10, E = M3/10 (c wrong). Equimolar amounts have unequal equivalents (8 : 6), so (d) is wrong.
Teacher's Note: Add electron loss of Cu and S in each sulphide; Ba(MnO4)2 has two Mn.
Exam Note: Equal moles do not mean equal equivalents.
Question 3.OM.16. Which is/are INCORRECT statement?
(a) Equivalent weight of H2PO3− is 40.5.
(b) Eq. wt. of H2PO4− may be equal to molar mass or less than molar mass depend on reaction.
(c) KMnO4 has maximum eq. wt. in acidic medium.
(d) Oxidation state of H in MgH2 is greater than in H2O2.
Solution. Answer (from key): (a), (c), (d). (c) is incorrect: KMnO4 has its minimum equivalent weight (M/5) in acidic medium; the maximum (M/1) is in basic medium. (d) is incorrect: H is −1 in MgH2 and +1 in H2O2. (b) is correct (M or M/2 depending on the reaction). (a) is listed as incorrect in the key (H2PO3−, M = 81, has one replaceable H in an acid–base reaction, so E = 81, not 40.5). Note: if oxidised to H2PO4− (n = 2) the value 40.5 is possible, so (a) is true only for redox.
Teacher's Note: Equivalent weight changes with the reaction: acid-base versus redox, medium of KMnO4.
Exam Note: KMnO4: smallest eq. wt. in acid, largest in base.
Match the Column
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
| Column-I | Column-II |
|---|---|
| (A) 0.5 mole of SO2(g) | (P) Occupy 11.2 L at 1 atm and 273 K |
| (B) 1 g of H2(g) | (Q) Weighs 24 g |
| (C) 0.5 mole of O3(g) | (R) Total no. of atoms = 1.5 × NA |
| (D) 1 g molecule of O2(g) | (S) Weighs 32 g |
Solution. Answer (from key): A → P, R, S; B → P; C → P, Q, R; D → S. (A) 0.5 mol SO2: 11.2 L, 1.5 NA atoms, 32 g. (B) 1 g H2 = 0.5 mol: 11.2 L. (C) 0.5 mol O3: 11.2 L, 24 g, 1.5 NA atoms. (D) 1 mol O2 = 32 g.
Teacher's Note: Convert each entry to moles, then compute volume, mass and atoms.
Exam Note: Atoms = moles × atomicity × NA.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
| Column-I | Column-II |
|---|---|
| (A) 44 g CO2 gas | (P) 1 g molecule |
| (B) 35.2 g of CH4 | (Q) NA molecule |
| (C) 48 g of O3 gas | (R) 22NA electrons |
| (D) 44 g of N2O gas | (S) 49.28 L at 1 atm and 273 K |
| (T) NA atoms of oxygen |
Solution. Answer (from key): A → P, Q, R; B → R, S; C → P, Q; D → P, Q, R, T. (A) 1 mol CO2: 1 g molecule, NA molecules, 22 NA electrons. (B) 35.2 g CH4 = 2.2 mol: 22 NA electrons, 49.28 L. (C) 1 mol O3: 1 g molecule, NA molecules. (D) 1 mol N2O: 22 NA electrons, one O atom per molecule, so NA O atoms.
Teacher's Note: Moles first: 44 g CO2 and 44 g N2O are 1 mol; 35.2 g CH4 is 2.2 mol.
Exam Note: Count electrons per molecule: CO2 22, CH4 10.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
| Column-I [Atomic masses (M)] | Column-II (% composition of heavier isotope) |
|---|---|
| (A) isotopes (z − 1), (z + 3); average z | (P) 25% by moles |
| (B) (z + 1), (z + 3); average (z + 2) | (Q) 50% by moles |
| (C) z, 3z; average 2z | (R) % by mass dependent on z |
| (D) (z − 1), (z + 1); average z | (S) 75% by mass |
Solution. Answer (from key): A → P, R; B → Q, R; C → Q, S; D → Q, R. Let the heavier isotope fraction be f. (A) (z − 1)(1 − f) + (z + 3)f = z gives f = 0.25 (P); mass % depends on z (R). (B) midpoint, f = 0.5 (Q); mass % depends on z (R). (C) z(1 − f) + 3zf = 2z gives f = 0.5 (Q); mass % = 0.5 × 3z/2z = 75% (S). (D) midpoint, f = 0.5 (Q); mass % depends on z (R).
Teacher's Note: Average mass equation gives mole fraction; convert to mass fraction using masses.
Exam Note: Mass % depends on z unless masses are proportional.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
| Column-I | Column-II |
|---|---|
| (A) When Bi2S3 converted into Bi5+ and S | (P) 18 |
| (B) When Al2(Cr2O7)3 reduced into Cr3+ in acidic medium | (Q) 11 |
| (C) When FeS2 converted into Fe2O3 and SO2 | (R) 2 |
| (D) When Mn(NO3)2 converted into MnO42− and NO | (S) 10 |
Solution. Answer (from key): A → S; B → P; C → Q; D → R. Taking the entries as the n-factor (electrons exchanged per mole): (A) Bi3+ → Bi5+ (2 × 2 = 4) and S2− → S (3 × 2 = 6): 10 (S). (B) 6 Cr6+ → Cr3+: 18 (P). (C) Fe2+ → Fe3+ (1) and S− → S4+ (2 × 5 = 10): 11 (Q). (D) Mn2+ → Mn6+ (4 e− lost) with NO3− → NO (2 × 3 = 6 e− gained): net 2 as per key (R). The question text does not say what the numbers represent; interpreted as n-factor.
Teacher's Note: Sum oxidation-state changes over all atoms of the compound that change.
Exam Note: Count every atom that changes oxidation state.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
| Column-I | Column-II |
|---|---|
| (A) Eq. wt. = Molecular weight/33 | (P) When CrI3 oxidises into Cr2O72− and IO4− |
| (B) Eq. wt. = Molecular weight/27 | (Q) When Fe(SCN)2 oxidises into Fe3+, SO42−, CO32− and NO3− |
| (C) Eq. wt. = Molecular weight/28 | (R) When NH4SCN oxidises into SO42−, CO32− and NO3− |
| (D) Eq. wt. = Molecular weight/24 | (S) When As2S3 oxidises into AsO43− and SO42− |
Solution. Answer (from key): A → Q; B → P; C → S; D → R. n-factors: (P) CrI3: Cr 3 + I 3 × 8 = 27. (Q) Fe(SCN)2: Fe 1 + 2 × (S 8 + N 8) = 33. (R) NH4SCN: NH4+ N 8, SCN− S 8 + N 8 = 24. (S) As2S3: 2 × 2 + 3 × 8 = 28. Hence A–Q, B–P, C–S, D–R.
Teacher's Note: Add up electrons lost per formula unit; carbon stays +4 in SCN-.
Exam Note: In SCN-, S and N change; C stays +4.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
| Column-I | Column-II |
|---|---|
| (A) P2H4 → PH3 + P4H2 | (P) E = 3M/4 |
| (B) I2 → I− + IO3− | (Q) E = 3M/5 |
| (C) MnO4− + Mn2+ + H2O → Mn3O4 + H+ | (R) E = 15M/26 |
| (D) H3PO2 → PH3 + H3PO3 | (S) E = 5M/6 |
Solution. Answer (from key): A → S; B → Q; C → R; D → P. (A) 5P2H4 → 6PH3 + P4H2: 6 e− per 5 mol, n = 6/5, E = 5M/6. (B) 3I2 → 5I− + IO3−: 5 e− per 3 mol, E = 3M/5. (C) Let a MnO4− and b Mn2+ form Mn3O4 (a + b = 3, Mn at +8/3): electrons gained a(13/3) = lost b(2/3), so a = 0.4, b = 2.6; electrons per Mn3O4 = 0.4 × 13/3 = 26/15, so E = 15M/26. (D) 3H3PO2 → PH3 + 2H3PO3: 4 e− per 3 mol, E = 3M/4.
Teacher's Note: For disproportionation, equivalent weight uses electrons transferred per total moles reacting.
Exam Note: Disproportionation: n is electrons per mole of reactant.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
Passage: a raw material contains NaNO3 and NaIO3. Reactions: (1) IO3− + HSO3− → I− + SO42−; (2) I− + IO3− → I2 + H2O. One litre of sample solution containing 396 g NaIO3 is treated with stoichiometric NaHSO3; then more of the same solution is added to bring about reaction (2).
| Column-I | Column-II |
|---|---|
| (A) n-factor of IO3− in reaction (2) | (P) 6 |
| (B) Number of moles of HSO3− used in reaction (1) | (Q) 1.2 |
| (C) Moles of I2 produced | (R) 2 |
| (D) Equivalents of IO3− used in reaction (2) | (S) 5 |
Solution. Answer (from key): A → S; B → P; C → Q; D → R. 396 g NaIO3 = 396/198 = 2 mol. (1) Each IO3− needs 3 HSO3−: 6 mol (P); 2 mol I− formed. (2) IO3− → I2 has n = 5 (S); 5I− + IO3− → 3I2: 2 mol I− needs 0.4 mol IO3− and gives 1.2 mol I2 (Q); equivalents of IO3− = 0.4 × 5 = 2 (R).
Teacher's Note: Reaction 1 makes iodide; reaction 2 is a comproportionation, 5 I- per IO3-.
Exam Note: Iodide formed in step 1 fixes all later quantities.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.
| Column-I | Column-II (Type of Redox Reaction) |
|---|---|
| (A) Br2 + OH− → BrO3− + Br− | (P) Intermolecular |
| (B) FeCl2 + KMnO4 + HCl → MnCl2 + FeCl3 | (Q) Intramolecular |
| (C) Ag2O → Ag + ½O2 | (R) Disproportion |
| (D) NH4NO3 → NO2 + H2O | (S) Comproportion |
Solution. Answer (from key): A → P, R; B → P; C → Q; D → Q, S. (A) Br2 is both oxidised and reduced (disproportionation); marked intermolecular too as per key. (B) Fe2+ and Mn7+ in different species: intermolecular. (C) Ag+ and O2− in the same compound: intramolecular. (D) N−3 and N+5 in the same compound both go to N+4: intramolecular comproportionation.
Teacher's Note: Same compound oxidised and reduced: intramolecular; same element at two states to one state: comproportion.
Exam Note: Identify oxidised and reduced species and where they sit.
Assertion-Reason Type Questions
Question 3.AR.1. STATEMENT-1: Specific gravity is dimensionless.
STATEMENT-2: Specific gravity is density of a substance measured w.r.t. density of water at 4°C.
Solution. Answer (from key): (B). Specific gravity is a ratio of two densities, so it has no units (Statement-1 true). Statement-2 is the definition and is true, but a definition does not itself explain why a ratio is dimensionless in the key's reading.
Teacher's Note: Ratio of two like quantities has no unit; the definition is only supporting.
Exam Note: Judge whether the reason explains the assertion.
Question 3.AR.2. STATEMENT-1: Molarity of pure water is 55.55 M at 298 K.
STATEMENT-2: Molarity is temperature dependent.
Solution. Answer (from key): (B). Taking density as 1 g/mL, 1000 g/18 g mol-1 = 55.55 M (approximate at 298 K). Molarity does depend on temperature (volume changes), but that is not why the value is 55.55.
Teacher's Note: Pure water: 1000/18 = 55.55 M, using density about 1.
Exam Note: Both true; temperature dependence does not explain the number.
Question 3.AR.3. STATEMENT-1: Gram molecular weight of O2 is 32.
STATEMENT-2: Relative atomic weight of oxygen is 32 a.m.u.
Solution. Answer (from key): (C). Gram molecular weight of O2 = 2 × 16 = 32 g (true). Relative atomic mass of oxygen is 16 a.m.u., not 32, so Statement-2 is false.
Teacher's Note: Atomic mass of O is 16; 32 is for O2 molecule.
Exam Note: Do not confuse atomic and molecular mass.
Question 3.AR.4. STATEMENT-1: The oxidation state of S in H2S2O8 is 6.
STATEMENT-2: Max. oxidation state of S is 6 because the max. oxidation state of an element is its no. of valence electron.
Solution. Answer (from key): (A). H2S2O8 (peroxodisulphuric acid) has a peroxo O–O link; the 2 peroxide O are −1 each, so S is +6. S has 6 valence electrons, so +6 is its maximum, which explains why S stays +6 rather than higher.
Teacher's Note: Peroxo O is -1; S stays +6, its maximum.
Exam Note: Account for the peroxide linkage when finding S.
Question 3.AR.5. STATEMENT-1: 0.1 M H3PO3(aq) solution has normality equal to 0.3 N when completely reacted with NaOH.
STATEMENT-2: H3PO3 is a dibasic acid.
Solution. Answer (from key): (D). H3PO3 is dibasic (n = 2), so N = 0.1 × 2 = 0.2 N, not 0.3 N. Statement-1 is false, Statement-2 is true.
Teacher's Note: Normality = molarity × basicity; H3PO3 has two acidic H.
Exam Note: Basicity of H3PO3 is 2, not 3.
Question 3.AR.6. STATEMENT-1: MnO2 can act as an oxidizing agent as well as reducing agent.
STATEMENT-2: Oxidation state of Mn lies between highest and lowest oxidation state.
Solution. Answer (from key): (A). Mn in MnO2 is +4, between +7 (highest) and +2 (lowest in common compounds), so it can be oxidised and reduced. Statement-2 correctly explains Statement-1.
Teacher's Note: Intermediate oxidation state allows both oxidation and reduction.
Exam Note: Intermediate oxidation state means dual behaviour.
Question 3.AR.7. STATEMENT-1: Equivalent volume of H2 is 11.2 L at 1 atm and 273 K.
STATEMENT-2: 1/2 mole H2 has produced when 1 mole of H+(aq) accepted 1 mole of e−.
Solution. Answer (from key): (A). Equivalent weight of H2 = 1 g (n = 2), so one equivalent is 1/2 mol, occupying 11.2 L. H+ + e− → ½H2 gives ½ mole H2 per mole of electrons, explaining Statement-1.
Teacher's Note: One equivalent of H2 is half a mole, 11.2 L at STP.
Exam Note: Equivalent volume = molar volume / n-factor.
Question 3.AR.8. STATEMENT-1: For the reaction, Na2CO3 + HCl → NaCl + NaHCO3, the suitable indicator is phenolphthalein.
STATEMENT-2: Phenolphthalein provide it's colour in acidic medium.
Solution. Answer (from key): (C). Conversion of carbonate to bicarbonate ends at pH about 8.3, the range of phenolphthalein (true). Phenolphthalein is colourless in acid and pink in basic medium, so Statement-2 is false.
Teacher's Note: Phenolphthalein changes colour in basic range (8.3-10), suiting carbonate to bicarbonate.
Exam Note: Phenolphthalein is colourless in acid.
Question 3.AR.9. STATEMENT-1: [Fe(CN)6]4− → Fe3+ + CO2 + NO3−, the equivalent weight of reactant is 3.74.
STATEMENT-2: Equivalent weight of reactant = Mol. wt./61.
Solution. Answer (from key): (D). n-factor: Fe 1 + 6 × (C: +2 → +4 = 2; N: −3 → +5 = 8) = 61. Equivalent weight = M/61 (Statement-2 true). M of [Fe(CN)6]4− = 212, so E = 212/61 = 3.48, not 3.74; Statement-1 is false.
Teacher's Note: n-factor 61 comes from Fe (1) plus six CN- at 10 electrons each.
Exam Note: Calculate 212/61 to test the stated value.
Question 3.AR.10. STATEMENT-1: In the balanced redox reaction, xAs2S3 + yNO3− + 4H2O → aAsO43− + bNO + cSO42− + 8H+ the n-factor of As2S3 and NO3− is 28 and 3 respectively.
STATEMENT-2: Molar ratio is reciprocal of n-factor's ratio so x : y is 3 : 28.
Solution. Answer (from key): (A). n(As2S3) = 2 × 2 + 3 × 8 = 28; n(NO3−) = 3. Moles are inversely proportional to n-factors, so x : y = 3 : 28, which follows from Statement-2.
Teacher's Note: Moles are in the inverse ratio of n-factors.
Exam Note: Inverse n-factor ratio gives mole ratio.
Question 3.AR.11. STATEMENT-1: NaOH + H3PO4 → NaH2PO4 + H2O in given reaction equivalent weight of H3PO4 is M/3.
STATEMENT-2: H3PO4 is tribasic acid.
Solution. Answer (from key): (D). Only one H+ is replaced in the given reaction, so n = 1 and E = M, not M/3 (Statement-1 false). H3PO4 is tribasic (Statement-2 true).
Teacher's Note: Equivalent weight depends on H+ replaced in that reaction, not on total basicity.
Exam Note: n-factor is hydrogens actually replaced.
Question 3.AR.12. STATEMENT-1: In CrO5 oxidation number of Cr is +6.
STATEMENT-2: CrO5 has butterfly structure in which peroxide bonds are present.
Solution. Answer (from key): (A). CrO5 has one Cr=O and two peroxo (O22−) groups: Cr + 4(−1) + 1(−2) = 0 gives Cr = +6. The peroxide bonds explain why Cr is +6 and not +10. (Structure: Cr bonded to one oxo O and two side-on peroxo O–O units.)
Teacher's Note: Peroxide O is -1; four of five O are peroxo, so Cr is +6.
Exam Note: Peroxide oxygens carry -1.
Question 3.AR.13. STATEMENT-1: I2 → IO3− + I−. This reaction is a disproportionation reaction.
STATEMENT-2: Oxidation number of I can vary from −1 to +7.
Solution. Answer (from key): (B). Iodine goes from 0 to +5 and −1, so it is a disproportionation (Statement-1 true). Iodine does show −1 to +7 (true), but this range does not explain why this reaction is a disproportionation.
Teacher's Note: One reactant element gives products in higher and lower oxidation states.
Exam Note: Range of states alone does not explain disproportionation.
Question 3.AR.14. STATEMENT-1: Fluorine exists only in −1 oxidation state.
STATEMENT-2: Fluorine has 2s22p5 configuration.
Solution. Answer (from key): (B). F is the most electronegative element and shows only −1 (apart from 0 in F2). Its configuration 2s22p5 is true but is not the reason; the reason is its extreme electronegativity and absence of d-orbitals.
Teacher's Note: Fluorine has highest electronegativity and no d orbitals, so no positive states.
Exam Note: Configuration is true but not the explanation.
Question 3.AR.15. STATEMENT-1: H2SO4 can not act as reducing agent.
STATEMENT-2: Sulphur can not increase its oxidation number beyond +6.
Solution. Answer (from key): (A). In H2SO4 sulphur is already +6, its maximum, so it cannot be oxidised; H2SO4 cannot reduce anything. Statement-2 explains Statement-1.
Teacher's Note: Sulphur at +6 cannot be oxidised further, so no reducing action.
Exam Note: Maximum oxidation state means no reducing ability.
Subjective Problems
Question 3.SP.1. What volume of a liquid (in L) will contain 10 mole? If molar mass of liquid is 280 and density is 1.4 g/mL.
Solution. Answer (from key): 2. Mass = 10 × 280 = 2800 g; volume = 2800/1.4 = 2000 mL = 2 L.
Teacher's Note: Mass from moles, then volume from density.
Exam Note: Use molar mass 280 g/mol.
Question 3.SP.2. 16 g of SOx gas occupies 5.6 L at 1 atm and 273 K. What will be the value of x?
Solution. Answer (from key): 2. n = 5.6/22.4 = 0.25 mol, so M = 16/0.25 = 64 = 32 + 16x, giving x = 2.
Teacher's Note: Molar mass from the volume at STP, then solve for x.
Exam Note: Molar mass 64 means x = 2.
Question 3.SP.3. 200 mL of 1 M HCl is mixed with 300 mL of 6 M HCl and the final solution is diluted to 1000 mL. Calculate molar concentration of [H+] ion.
Solution. Answer (from key): 2. Total H+ = 200 × 1 + 300 × 6 = 2000 m-mol; M = 2000/1000 = 2 M.
Teacher's Note: Add moles of both portions, divide by final volume.
Exam Note: Dilution changes volume, not moles.
Question 3.SP.4. N2(g) reacts with H2(g) in either of the following ways depending on supply of H2(g): N2(g) + H2(g) → N2H2(l); N2(g) + 2H2(g) → N2H4(g). If 5 L N2(g) and 3 L H2(g) are taken initially (at same temperature and pressure), calculate the contraction in volume after the reaction (in L).
Solution. Answer (from key): 6. With H2 limited (3 L), the first reaction takes place: 3 L H2 reacts with 3 L N2 to give liquid N2H2 (negligible volume); 2 L N2 remains. Final volume = 2 L; initial = 8 L; contraction = 6 L.
Teacher's Note: Limited H2 forms the liquid N2H2; liquid occupies no gas volume.
Exam Note: Liquid product contributes no volume.
Question 3.SP.5. One commercial system removes SO2 emission from smoke at 95°C by the following set of reaction: SO2(g) + Cl2(g) → SO2Cl2(g); SO2Cl2(g) + H2O(l) → H2SO4 + HCl; H2SO4 + Ca(OH)2 → CaSO4 + H2O. How many grams of CaSO4 may be produced from 3.78 g of SO2?
Solution. Answer (from key): 8. Moles of SO2 = 3.78/64 = 0.0591 = moles of CaSO4 (1 : 1 : 1 : 1 chain, POAC on S). Mass = 0.0591 × 136 = 8.03 g ≈ 8 g.
Teacher's Note: POAC on sulphur: one mole SO2 gives one mole CaSO4.
Exam Note: Conserve S atoms through all steps.
Question 3.SP.6. W is the weight of iron (in g) which will be converted into Fe3O4 by the action of 18 g of steam on it. What is the value of W/7? [Fe + H2O → Fe3O4 + H2]
Solution. Answer (from key): 6. 3Fe + 4H2O → Fe3O4 + 4H2. 18 g steam = 1 mol, so Fe = 3/4 mol = 42 g. W/7 = 6.
Teacher's Note: Balance first: 3 Fe per 4 H2O.
Exam Note: Balance the equation before using mole ratios.
Question 3.SP.7. Calculate the total mole of atoms of each element present in 122.5 g of KClO3.
Solution. Answer (from key): 5. 122.5 g KClO3 = 1 mol: 1 mol K + 1 mol Cl + 3 mol O = 5 mol of atoms in total.
Teacher's Note: Moles of formula units times atoms of each element.
Exam Note: Key value 5 is the total number of moles of atoms.
Question 3.SP.8. On dissolving 2.0 g of metal in sulphuric acid, 4.51 g of the metal sulphate was formed. The specific heat of the metal is 0.057 cal g-1 °C-1. What is the valency of the metal?
Solution. Answer (from key): 3. Sulphate mass 4.51 − 2.0 = 2.51 g of SO4 combines with 2.0 g metal, so equivalent weight = 2.0/2.51 × 48 = 38.25. Approximate atomic weight (Dulong–Petit) = 6.4/0.057 = 112.3. Valency = 112.3/38.25 = 2.94 ≈ 3.
Teacher's Note: Equivalent weight from sulphate, atomic weight from Dulong-Petit; ratio gives valency.
Exam Note: Valency = atomic weight / equivalent weight.
Question 3.SP.9. One gram of a metallic chloride was found to contain 0.835 g of chlorine. Its vapour density metallic chloride is 85.5, then what is the value of (x + y) if its molecular formula is MxCly?
Solution. Answer (from key): 5. Metal = 0.165 g per 0.835 g Cl: equivalent weight = 0.165/0.835 × 35.5 = 7.01. Molar mass = 2 × 85.5 = 171. Let y = valency: 7.01y + 35.5y = 171, so y = 4 and x = 1 (MCl4). x + y = 5.
Teacher's Note: Equivalent weight and vapour density give the formula.
Exam Note: Molar mass = 2 × vapour density.
Question 3.SP.10. 0.7875 g of crystalline barium hydroxide is dissolved in water. For the neutralisation of this solution 20 mL of N/4 HNO3 is required. How many mole of water are present in one mole of this base? (Given: Atomic mass Ba = 137, O = 16, N = 14, H = 1)
Solution. Answer (from key): 8. m-eq HNO3 = 20 × 0.25 = 5, so equivalent weight of the hydrate = 0.7875/5 × 1000 = 157.5; molar mass = 315. Ba(OH)2 = 171, so water = 315 − 171 = 144 = 8 × 18. Hence Ba(OH)2·8H2O.
Teacher's Note: Equivalent weight times 2 gives hydrate molar mass; the excess over 171 is water.
Exam Note: Ba(OH)2 hydrate has n = 2.
Question 3.SP.11. 2.0 g of polybasic organic acid (Molecular wt. = 600) required 100 mL of M/6 NaOH solution for complete neutralisation. Find the basicity of acid.
Solution. Answer (from key): 5. Acid = 2.0 g/600 = 3.33 m-mol. NaOH = 100 × (1/6) = 16.67 m-mol. Basicity = 16.67/3.33 = 5.
Teacher's Note: Basicity is m-mol of NaOH divided by m-mol of acid.
Exam Note: Read M/6 as 1/6 molar.
Question 3.SP.12. A mixture contains 1.0 mole each of NaOH, Na2CO3 and NaHCO3. When half of mixture is titrated with HCl, it required x mole of HCl in presence of phenolphthalein. In another experiment, half of mixture required y mole of same HCl in presence of methyl orange. Find the value of (x + y).
Solution. Answer (from key): 3. Half the mixture: 0.5 mol each. Phenolphthalein: NaOH 0.5 + Na2CO3 → NaHCO3 0.5 = 1.0 = x. Methyl orange: NaOH 0.5 + Na2CO3 2 × 0.5 + NaHCO3 0.5 = 2.0 = y. x + y = 3.
Teacher's Note: Phenolphthalein sees NaOH and half of carbonate; methyl orange sees everything.
Exam Note: Methyl orange counts carbonate as two H+.
Question 3.SP.13. When BrO3− ion reacts with Br− ion in acidic medium, Br2 is liberated. Calculate the ratio of molecular weight and equivalent weight of KBrO3.
Solution. Answer (from key): 5. BrO3− + 5Br− + 6H+ → 3Br2 + 3H2O. Br goes +5 → 0: n-factor = 5, so M/E = 5.
Teacher's Note: Ratio M/E is the n-factor: +5 to 0 gives 5.
Exam Note: Reduction is to Br2, not Br-.
Question 3.SP.14. A volume of 12.5 mL of 0.05 M SeO2 reacts with 25 mL of 0.1 M CrSO4 which is oxidised to Cr3+. To what oxidation state was the selenium converted by the reaction?
Solution. Answer (from key): 0. m-mol SeO2 = 12.5 × 0.05 = 0.625; electrons from Cr2+ → Cr3+ = 25 × 0.1 × 1 = 2.5 m-mol. Electrons per Se = 2.5/0.625 = 4, so Se4+ → Se0. Final oxidation state = 0.
Teacher's Note: Electrons per Se atom = total electrons / moles Se.
Exam Note: Final state = initial +4 minus electrons gained.
Question 3.SP.15. 0.276 g impure sample of copper ore is dissolved and Cu2+ is titrated with KI solution. I2 liberated required 40 mL of 0.1 M Na2S2O3 solution for titration. What is the % of impurities in the ore?
Solution. Answer (from key): 8. 2Cu2+ + 4I− → Cu2I2 + I2, so m-mol Cu = m-mol thiosulphate = 40 × 0.1 = 4. Mass of Cu = 4 × 63.5 = 254 mg = 0.254 g. Purity = 0.254/0.276 = 92%; impurities = 8%.
Teacher's Note: One Cu2+ gives half an I2, equal to one thiosulphate; then percent by mass.
Exam Note: Report impurities, not purity (92%).
Question 3.SP.16. A sample of 28 mL H2O2(aq) solution required 10 mL of 0.1 M KMnO4(aq) solution for complete reaction in acidic medium. What is the volume strength of H2O2?
Solution. Answer (from key): 1. m-eq KMnO4 = 10 × 0.1 × 5 = 5 = 28 × N, so N = 5/28 = 0.1786. Volume strength = 5.6 × N = 1.0.
Teacher's Note: Normality from equivalents, then volume strength = 5.6 × N.
Exam Note: Volume strength is 5.6 times normality.
Question 3.SP.17. In the redox reaction, xNO3− + yAs2S3 + zH2O → ---AsO43− + ---NO + ---SO42− + ---H+. What is the value of x/z?
Solution. Answer (from key): 7. n(NO3−) = 3; n(As2S3) = 28, so x : y = 28 : 3. Balanced: 28NO3− + 3As2S3 + 4H2O → 6AsO43− + 28NO + 9SO42− + 8H+. x = 28, z = 4, so x/z = 7.
Teacher's Note: Fix coefficients using n-factors 3 and 28, then balance water.
Exam Note: Balance O and H last to get z.
Question 3.SP.18. On heating 0.220 g of a metallic oxide in presence of hydrogen, 0.045 g of water is formed. If the equivalent weight of the metal is E, then what is the value of E/9?
Solution. Answer (from key): 4. Oxygen in the oxide = 0.045 × 16/18 = 0.04 g. Metal = 0.220 − 0.040 = 0.180 g. E = 0.180/0.040 × 8 = 36, so E/9 = 4.
Teacher's Note: Oxygen from water mass; equivalent weight from the metal-to-oxygen ratio.
Exam Note: Oxygen is 16/18 of the water mass.
Question 3.SP.19. 10 g mixture of K2Cr2O7 and KMnO4 was treated with excess of KI in acidic medium. Iodine liberated required 100 cm3 of 2.2 N sodium thiosulphate solution for titration. If the mass percent of KMnO4 in the mixture Z, then what is the value of 2Z/5?
Solution. Answer (from key): 6. Equivalent weights: K2Cr2O7 49, KMnO4 31.6. Let KMnO4 = m g: m/31.6 + (10 − m)/49 = 100 × 2.2 × 10-3 = 0.22, giving m = 1.417 g. Z = 14.17%, so 2Z/5 = 5.67 ≈ 6 (nearest integer, as in the key).
Teacher's Note: Two oxidants, one equation in equivalents; then convert to mass percent.
Exam Note: Z is a percent; the key rounds 5.67 to 6.
Question 3.SP.20. In an ore the only oxidisable material is Sn2+. This ore is titrated with a dichromate solution containing 2.5 g K2Cr2O7 in 0.50 litre. A 0.40 g of sample of the ore required 10.0 cm3 of the titrant to reach equivalent point. If the percentage of tin in ore is x, then what is the value of x/17? (K = 39.1, Cr = 52, Sn = 118.7)
Solution. Corrected: N of dichromate = (2.5/49.03)/0.50 = 0.102 N. m-eq in 10 mL = 1.02; Sn2+ → Sn4+ (n = 2), so Sn = 1.02 × 59.35 mg = 60.6 mg. % Sn = 0.0606/0.40 × 100 = 15.1, so x/17 = 0.89. The key prints 3 (x = 51), which cannot be reproduced from the data as printed (it would need about 3.4 m-eq of dichromate in 10 mL); the data in the source may be misprinted.
Teacher's Note: Equivalents of dichromate (n = 6) equal equivalents of Sn2+ (n = 2); then percent of sample.
Exam Note: Key value 3 disagrees; check source data.
Download Narendra Awasthi Solutions for JEE Math PDF
Download Narendra Awasthi Solutions for JEE
Explore reliable mathematical solutions for Narendra Awasthi Solutions Physical Chemistry Chapter 1 Stoichiometry Part 2 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Concept-Driven Math Answers
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Complete Your JEE Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.