Narendra Awasthi Solutions Physical Chemistry Chapter 1 Stoichiometry Part 1

Narendra Awasthi Solutions for JEE Chemistry: Chapter 01 Stoichiometry

Explore reliable textbook solutions for Chapter 01 Stoichiometry tailored for JEE learners using Narendra Awasthi methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice JEE Chemistry Solutions: Chapter 01 Stoichiometry

View or download the dedicated Chapter 01 Stoichiometry solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

1. Chemical Reactions and Equations

Stoichiometry - Level 1 (Q1-200) and Level 2 (Q1-14)

Level 1

Question 1. Calculate number of neutrons present in 12×1025 atoms of oxygen (8O17). (Given: NA = 6×1023)

(a) 1800   (b) 1600   (c) 1800 NA   (d) 3200 NA

Solution. Answer (from key): (c) 1800 NA. Neutrons per atom = 17 − 8 = 9. Moles of atoms = 12×1025/(6×1023) = 200, so neutrons = 200 × 9 NA = 1800 NA.

Teacher's Note: Neutrons = mass number − atomic number; convert atoms to moles first.

Exam Note: Express answer in NA units as options do.

Question 2. If mass of one atom is 3.32×10−23 g, then calculate number of nucleons (neutrons and protons) present in 2 atoms of the element.

(a) 40   (b) 20   (c) 10   (d) 40 NA

Solution. Answer (from key): (a) 40. Molar mass = 3.32×10−23 × 6.022×1023 ≈ 20 g/mol, so mass number 20 (nucleons per atom). Two atoms: 2 × 20 = 40.

Teacher's Note: Molar mass in g/mol equals nucleon count per atom.

Exam Note: Do not multiply by NA; question asks for 2 atoms.

Question 3. Calculate number of electrons present in 9.5 g of PO43−.

(a) 6   (b) 5 NA   (c) 0.1 NA   (d) 4.7 NA

Solution. Answer (from key): (b) 5 NA. Moles = 9.5/95 = 0.1. Electrons per ion = 15 + 4×8 + 3 = 50. Total = 0.1 × 50 NA = 5 NA.

Teacher's Note: Add the ionic charge electrons: 47 + 3 = 50.

Exam Note: Forgetting the 3 extra electrons gives option (d).

Question 4. What is the number of moles of O-atom in 126 amu of HNO3?

(a) 2   (b) 2/NA   (c) 6   (d) 6/NA

Solution. Answer (from key): (d) 6/NA. 126 amu = 2 molecules of HNO3 (63 amu each) = 6 O atoms. Moles = 6/NA.

Teacher's Note: amu counts single particles, so moles carry 1/NA.

Exam Note: Check whether amu or gram is given.

Question 5. What is the charge of 96 amu of S2−?

(a) 2C   (b) 3.2×10−19 C   (c) 9.6×10−19 C   (d) 6C

Solution. Answer (from key): (c) 9.6×10−19 C. 96 amu = 3 ions of S2− (32 each). Charge = 3 × 2 × 1.6×10−19 = 9.6×10−19 C.

Teacher's Note: Count ions in the given amu, then multiply by 2e.

Exam Note: Units must be coulombs; 6C is wrong.

Question 6. A sample of sodium has a mass of 46 g. What is the mass of the same number of calcium atoms as sodium atoms present in given sample?

(a) 46 g   (b) 20 g   (c) 40 g   (d) 80 g

Solution. Answer (from key): (d) 80 g. 46 g Na = 2 mol, so 2 mol Ca = 2 × 40 = 80 g.

Teacher's Note: Same number of atoms means same moles.

Exam Note: Compute moles, then multiply by Ca molar mass.

Question 7. The total no. of neutrons present in 54 mL H2O (l) are:

(a) 3 NA   (b) 30 NA   (c) 24 NA   (d) none of these

Solution. Answer (from key): (c) 24 NA. Density 1 g/mL, so 54 g = 3 mol. Neutrons per H2O = 8 (H has none). Total = 3 × 8 NA = 24 NA.

Teacher's Note: Protium has no neutrons; only oxygen contributes 8.

Exam Note: Convert volume to mass using density 1 g/mL.

Question 8. Total no. of electrons present in 48 g Mg2+ are:

(a) 24 NA   (b) 2 NA   (c) 20 NA   (d) none of these

Solution. Answer (from key): (c) 20 NA. 48 g = 2 mol Mg2+; each has 12 − 2 = 10 electrons. Total = 20 NA.

Teacher's Note: Cation electrons = atomic number − charge.

Exam Note: Using 12 electrons per ion is the common trap.

Question 9. The number of neutron in 5 g of D2O (D is 12H) are:

(a) 0.25 NA   (b) 2.5 NA   (c) 1.1 NA   (d) none of these

Solution. Answer (from key): (b) 2.5 NA. Molar mass of D2O = 20, so 5 g = 0.25 mol. Neutrons per molecule = 1 + 1 + 8 = 10. Total = 2.5 NA.

Teacher's Note: Deuterium has one neutron each; oxygen has eight.

Exam Note: Use molar mass 20, not 18.

Question 10. Cisplatin, an anticancer drug, has the molecular formula Pt(NH3)2Cl2. What is the mass (in gram) of one molecule? (Atomic weights: Pt = 195, H = 1.0, N = 14, Cl = 35.5)

(a) 4.98×10−21   (b) 4.98×10−22   (c) 6.55×10−21   (d) 3.85×10−22

Solution. Answer (from key): (b) 4.98×10−22. Molar mass = 195 + 2(14 + 3) + 71 = 300 g/mol. Mass of one molecule = 300/6.022×1023 = 4.98×10−22 g.

Teacher's Note: Mass per molecule = molar mass / NA.

Exam Note: Sum Pt, two NH3 and two Cl carefully.

Question 11. Aspirin has the formula C9H8O4. How many atoms of oxygen are there in a tablet weighing 360 mg?

(a) 1.204×1023   (b) 1.08×1022   (c) 1.204×1024   (d) 4.81×1021

Solution. Answer (from key): (d) 4.81×1021. Molar mass = 180 g/mol. 0.360 g = 0.002 mol. O atoms = 0.002 × 4 × 6.022×1023 = 4.81×1021.

Teacher's Note: Convert mg to g, then moles, then atoms.

Exam Note: mg to g conversion is the usual slip.

Question 12. 20 g of an ideal gas contains only atoms of S and O occupies 5.6 L at 1 atm and 273 K. What is the mol. wt. of gas?

(a) 64   (b) 80   (c) 96   (d) None of these

Solution. Answer (from key): (b) 80. Moles = 5.6/22.4 = 0.25. Molar mass = 20/0.25 = 80 (SO3).

Teacher's Note: Use molar volume 22.4 L at STP.

Exam Note: Check the formula fits S and O only.

Question 13. A sample of ammonium phosphate, (NH4)3PO4, contains 6 moles of hydrogen atoms. The number of moles of oxygen atoms in the sample is:

(a) 1   (b) 2   (c) 4   (d) 6

Solution. Answer (from key): (b) 2. 12 H atoms per formula unit, so 6 mol H = 0.5 mol compound. O = 0.5 × 4 = 2 mol.

Teacher's Note: Use mole ratio H : O = 12 : 4.

Exam Note: Ratio method avoids computing molar mass.

Question 14. Total number of moles of oxygen atoms in 3 litre O3(g) at 27°C and 8.21 atm are:

(a) 3   (b) 1   (c) 2   (d) none of these

Solution. Answer (from key): (a) 3. n = PV/RT = (8.21 × 3)/(0.0821 × 300) = 1 mol O3, so O atoms = 3 mol.

Teacher's Note: Gas equation first; then three atoms per ozone molecule.

Exam Note: Convert °C to K.

Question 15. 3.011×1022 atoms of an element weight 1.15 gm. The atomic mass of the element is:

(a) 10   (b) 2.3   (c) 35.5   (d) 23

Solution. Answer (from key): (d) 23. Moles = 3.011×1022/6.022×1023 = 0.05. Atomic mass = 1.15/0.05 = 23 (Na).

Teacher's Note: Atomic mass = mass per mole of atoms.

Exam Note: 3.011×1022 is 0.05 NA.

Question 16. One atom of an element x weigh 6.643×10−23 g. Number of moles of atom in 20 kg is:

(a) 4   (b) 40   (c) 100   (d) 500

Solution. Answer (from key): (d) 500. Atomic weight = 6.643×10−23 × 6.022×1023 = 40 g/mol. Moles in 20 kg = 20000/40 = 500.

Teacher's Note: Find molar mass first, then convert kg to g.

Exam Note: kg to g conversion needed.

Question 17. Mass of one atom of the element A is 3.9854×10−23 g. How many atoms are contained in 1 g of the element A?

(a) 2.509×1023   (b) 6.022×1023   (c) 12.044×1023   (d) None of these

Solution. Answer (from key): (d) None of these. Atoms = 1/3.9854×10−23 = 2.509×1022, which does not match (a) (factor 10 off), so none of these.

Teacher's Note: Atoms in 1 g = 1/(mass of one atom).

Exam Note: Check the power of ten carefully.

Question 18. Which of the following contains the largest mass of hydrogen atoms?

(a) 5.0 moles C2H2O4   (b) 1.1 moles C3H8O3   (c) 1.5 moles C6H8O6   (d) 4.0 moles C2H4O2

Solution. Answer (from key): (d) 4.0 moles C2H4O2. Moles of H: (a) 5×2 = 10; (b) 1.1×8 = 8.8; (c) 1.5×8 = 12; (d) 4×4 = 16. Largest is (d).

Teacher's Note: Multiply moles by H atoms per formula.

Exam Note: Compare moles of H only; mass follows.

Question 19. Which has minimum number of atoms of oxygen?

(a) 10 mL H2O (l)   (b) 0.1 mole of V2O5 (s)   (c) 12 gm O3(g)   (d) 12.044×1022 molecules of CO2

Solution. Answer (from key): (d) 12.044×1022 molecules of CO2. Moles of O atoms: (a) 10/18 = 0.556; (b) 0.1×5 = 0.5; (c) 12/16 = 0.75; (d) 0.2 × 2 = 0.4. Minimum is (d).

Teacher's Note: Convert each to moles of O atoms and compare.

Exam Note: 12 g O3 is 0.75 mol O atoms.

Question 20. Rearrange the following (I to IV) in the order of increasing masses: (I) 0.5 mole of O3 (II) 0.5 gm atom of oxygen (III) 3.011×1023 molecules of O2 (IV) 5.6 litre of CO2 at STP

(a) II < IV < III < I   (b) II < I < IV < III   (c) IV < II < III < I   (d) I < II < III < IV

Solution. Answer (from key): (a) II < IV < III < I. I = 0.5×48 = 24 g; II = 0.5×16 = 8 g; III = 0.5×32 = 16 g; IV = 0.25×44 = 11 g. Order: II < IV < III < I.

Teacher's Note: Compute all four masses in grams.

Exam Note: gm atom means mass of atoms, 16 g/mol.

Question 21. The volume of a drop of water is 0.0018 ml then the number of water molecules present in two drop of water at room temperature is:

(a) 12.046×1019   (b) 1.084×1018   (c) 4.84×1017   (d) 6.023×1023

Solution. Answer (from key): (a) 12.046×1019. Mass of 2 drops = 0.0036 g (density 1). Moles = 0.0036/18 = 2×10−4. Molecules = 2×10−4 × 6.022×1023 = 1.2×1020 = 12.046×1019.

Teacher's Note: Two drops, not one: double the volume.

Exam Note: Water density 1 g/mL at room temperature.

Question 22. It is known that atom contain protons, neutrons and electrons. If the mass of neutron is assumed to half of its original value whereas that of proton is assumed to be twice of its original value then the atomic mass of 614C will be:

(a) same   (b) 14.28% less   (c) 14.28% more   (d) 28.56% less

Solution. Answer (from key): (c) 14.28% more. 614C has 6 protons and 8 neutrons. New mass = 6×2 + 8×0.5 = 16 (electron mass negligible). Change = (16 − 14)/14 × 100 = 14.28% more.

Teacher's Note: Atomic mass ≈ protons + neutrons, ignoring electrons.

Exam Note: Apply new masses to 6p and 8n separately.

Question 23. Common salt obtained from sea-water contains 8.775% NaCl by mass. The number of formula units of NaCl present in 25 g of this salt is:

(a) 3.367×1023 formula units   (b) 2.258×1022 formula units   (c) 3.176×1023 formula units   (d) 4.73×1025 formula units

Solution. Answer (from key): (b) 2.258×1022 formula units. NaCl mass = 0.08775 × 25 = 2.194 g. Moles = 2.194/58.5 = 0.0375. Formula units = 0.0375 × 6.022×1023 = 2.258×1022.

Teacher's Note: Take the NaCl fraction of the sample first.

Exam Note: Molar mass of NaCl is 58.5.

Question 24. The number of hydrogen atoms present in 25.6 g of sucrose (C12H22O11) which has a molar mass of 342.3 g is:

(a) 22×1023   (b) 9.91×1023   (c) 11×1023   (d) 44×1023

Solution. Answer (from key): (b) 9.91×1023. Moles = 25.6/342.3 = 0.0748. H atoms = 0.0748 × 22 × 6.022×1023 = 9.91×1023.

Teacher's Note: Multiply moles of sucrose by 22 H per molecule.

Exam Note: Use given molar mass 342.3.

Question 25. Caffiene has a molecular weight of 194. If it contains 28.9% by mass of nitrogen, number of atoms of nitrogen in one molecule of caffeine is:

(a) 4   (b) 6   (c) 2   (d) 3

Solution. Answer (from key): (a) 4. Mass of N per mole = 0.289 × 194 = 56.07 g. Atoms of N = 56.07/14 = 4.

Teacher's Note: Mass of N per mole divided by 14 gives atoms per molecule.

Exam Note: Percentage times molar mass is the key step.

Question 26. The density of water is 1g/mL. What is the volume occupied by 1 molecule of water?

(a) 1.44×10−23 mL   (b) 1 mL   (c) 18 mL   (d) 2.88×10−23 mL

Solution. Answer (from key): (d) 2.88×10−23 mL. Mass of one molecule = 18/6.022×1023 = 2.99×10−23 g, so volume ≈ 2.99×10−23 mL. Nearest option and key: (d) (printed 2.88×10−23).

Teacher's Note: Volume of one molecule = molar mass/(density × NA).

Exam Note: Print rounding: exact value is 2.99×10−23 mL.

Question 27. A 25.0 mm × 40.0 mm piece of gold foil is 0.25 mm thick. The density of gold is 19.32 g/cm3. How many gold atoms are in the sheet? (Atomic weight: Au = 197.0)

(a) 7.7×1023   (b) 1.5×1023   (c) 4.3×1021   (d) 1.47×1022

Solution. Answer (from key): (d) 1.47×1022. Volume = 2.5 × 4.0 × 0.025 = 0.25 cm3. Mass = 0.25 × 19.32 = 4.83 g. Moles = 4.83/197 = 0.0245. Atoms = 0.0245 × 6.022×1023 = 1.47×1022.

Teacher's Note: Convert mm to cm before computing volume.

Exam Note: Unit conversion mm to cm earns first mark.

Question 28. If average molecular wt. of air is 29, then assuming N2 and O2 gases are there which options are correct regarding composition of air: (i) 75% by mass of N2 (ii) 75% by moles N2 (iii) 72.41% by mass of N2

(a) only (i) is correct   (b) only (ii) is correct   (c) both (ii) and (iii) are correct   (d) both (i) and (ii) are correct

Solution. Answer (from key): (c) both (ii) and (iii) are correct. Let mole fraction of N2 = x: 28x + 32(1 − x) = 29, so x = 0.75 (75% by moles). Mass % = 0.75 × 28/29 × 100 = 72.41%. So (ii) and (iii) are correct.

Teacher's Note: Mole fraction from average molar mass; then convert to mass %.

Exam Note: Mole % and mass % differ; do not confuse them.

Question 29. Density of dry air containing only N2 and O2 is 1.15 g/L at 740 mm and 300 K. What is % composition of N2 by weight in the air?

(a) 78%   (b) 75.5%   (c) 70.02%   (d) 72.75%

Solution. Answer (from key): (c) 70.02%. M = dRT/P = 1.15 × 0.0821 × 300/(740/760) = 29.09. 28x + 32(1 − x) = 29.09 gives x = 0.7275. Mass % = 72.75 × 28/29.09 = 70.02%.

Teacher's Note: M = dRT/P; then mole fraction; then mass %.

Exam Note: Convert 740 mm Hg to atm.

Question 30. A gaseous mixture of H2 and CO2 gas contains 66 mass % of CO2. The vapour density of the mixture is:

(a) 6.1   (b) 5.4   (c) 2.7   (d) 10.8

Solution. Answer (from key): (c) 2.7. In 100 g: CO2 = 66/44 = 1.5 mol; H2 = 34/2 = 17 mol. Mavg = 100/18.5 = 5.4. V.D. = 5.4/2 = 2.7.

Teacher's Note: Vapour density is half of average molar mass.

Exam Note: Choose 100 g basis to simplify.

Question 31. The vapour density of a mixture containing NO2 and N2O4 is 27.6. The mole fraction of N2O4 in the mixture is:

(a) 0.1   (b) 0.2   (c) 0.5   (d) 0.8

Solution. Answer (from key): (b) 0.2. M = 2 × 27.6 = 55.2. 92x + 46(1 − x) = 55.2 gives x = 0.2.

Teacher's Note: Molar mass = 2 × vapour density.

Exam Note: Weighted average of 46 and 92.

Question 32. Density of an ideal gas at 2 atm and 600 K is 2 g/L. Calculate relative density of this gas with respect to Ne(g) at same conditions. (Given: R = 1/12 atm L/mol.K)

(a) 2.5   (b) 2   (c) 3   (d) 5

Solution. Answer (from key): (a) 2.5. M = dRT/P = 2 × (1/12) × 600/2 = 50 g/mol. Relative density = 50/20 = 2.5.

Teacher's Note: At same T and P, relative density equals ratio of molar masses.

Exam Note: Ne molar mass is 20.

Question 33. Average atomic mass of magnesium is 24.31 a.m.u. This magnesium is composed of 79 mole % of 24Mg and remaining 21 mole % of 25Mg and 26Mg. Calculate mole % of 26Mg.

(a) 10   (b) 11   (c) 15   (d) 16

Solution. Answer (from key): (a) 10. Let 26Mg = x%: [79×24 + (21 − x)×25 + x×26]/100 = 24.31, giving x = 10.

Teacher's Note: Weighted average gives one linear equation in x.

Exam Note: Remaining 21% is shared by two isotopes.

Question 34. Indium (atomic weight = 114.82) has two naturally occurring isotopes, the predominant one form has isotopic weight 114.9041 and abundance of 95.72%. Which of the following isotopic weights is the most likely for the other isotope?

(a) 112.94   (b) 115.90   (c) 113.90   (d) 114.90

Solution. Answer (from key): (a) 112.94. 114.82 = 0.9572 × 114.9041 + 0.0428 × m, so m = (114.82 − 109.987)/0.0428 = 112.9.

Teacher's Note: Average mass lies between isotopic masses; solve for the minor one.

Exam Note: Minor isotope must be lighter than the average.

Question 35. Calculate density of a gaseous mixture which consist of 3.01×1024 molecules of N2 and 32 g of O2 gas at 3 atm pressure and 860 K temperature (Given: R = 1/12 atm L/mole.K)

(a) 0.6 g/L   (b) 1.2 g/L   (c) 0.3 g/L   (d) 12 g/L

Solution. Answer (from key): (b) 1.2 g/L. N2 = 5 mol (140 g); O2 = 1 mol (32 g). Total 6 mol, 172 g. V = nRT/P = 6 × (1/12) × 860/3 = 143.3 L. d = 172/143.3 = 1.2 g/L.

Teacher's Note: Total mass over volume from the gas equation.

Exam Note: Convert molecule count to moles.

Question 36. A mixture of O2 and gas "Y" (mol. wt. 80) in the mole ratio a : b has a mean molecular weight 40. What would be mean molecular weight, if the gases are mixed in the ratio b : a under identical conditions? (gases are non-reacting)

(a) 40   (b) 48   (c) 62   (d) 72

Solution. Answer (from key): (d) 72. (32a + 80b)/(a + b) = 40 gives a = 5b, so mole fractions are 5/6 O2 and 1/6 Y. Reversed: M = 32×(1/6) + 80×(5/6) = 72.

Teacher's Note: Find a:b first, then swap the fractions.

Exam Note: Swap ratio means O2 = 1/6.

Question 37. If water sample are taken from sea, rivers or lake, they will be found to contain hydrogen and oxygen in the approximate ratio of 1 : 8. This indicates the law of:

(a) Multiple proportion   (b) Definite proportion   (c) Reciprocal proportions   (d) None of these

Solution. Answer (from key): (b) Definite proportion. Same compound always has same mass ratio H : O = 1 : 8, which is the law of definite (constant) proportions.

Teacher's Note: Same compound, same composition regardless of source.

Exam Note: Name Proust's law and state the ratio.

Question 38. Hydrogen and oxygen combine to form H2O2 and H2O containing 5.93% and 11.2% hydrogen respectively. The data illustrates:

(a) law of conservation of mass   (b) law of constant proportion   (c) law of reciprocal proportion   (d) law of multiple proportion

Solution. Answer (from key): (d) law of multiple proportion. Mass of O per g of H: H2O2 = 94.07/5.93 = 15.86; H2O = 88.8/11.2 = 7.93. Ratio 2 : 1, a simple whole number, so law of multiple proportions.

Teacher's Note: Fix hydrogen mass and compare oxygen masses.

Exam Note: Two compounds of same elements gives multiple proportions.

Question 39. One of the following combinations illustrate law of reciprocal proportions:

(a) N2O3, N2O4, N2O5   (b) NaCl, NaBr, NaI   (c) CS2, CO2, SO2   (d) PH3, P2O3, P2O5

Solution. Answer (from key): (c) CS2, CO2, SO2. Reciprocal proportions need three compounds among three elements: C and S each combine with O (CO2, SO2) and with each other (CS2).

Teacher's Note: Look for A-B, A-C and B-C triads.

Exam Note: Not multiple proportion: three different elements.

Question 40. Carbon and oxygen combine to form two oxides, carbon monoxide and carbon dioxide in which the ratio of the weights of carbon and oxygen is respectively 12 : 16 and 12 : 32. These figures illustrate the:

(a) Law of multiple proportions   (b) Law of reciprocal proportions   (c) Law of conservation of mass   (d) Law of constant proportions

Solution. Answer (from key): (a) Law of multiple proportions. For fixed 12 g of C, oxygen is 16 g and 32 g, ratio 1 : 2 (small whole numbers): law of multiple proportions.

Teacher's Note: Fix C mass; O masses are in ratio 1 : 2.

Exam Note: Same two elements forming two compounds.

Question 41. A sample of calcium carbonate (CaCO3) has the following percentage composition: Ca = 40%, C = 12%, O = 48%. If the law of constant proportions is true, then the weight of calcium in 4 g of a sample of calcium carbonate obtained from another source will be:

(a) 0.016 g   (b) 0.16 g   (c) 1.6 g   (d) 16 g

Solution. Answer (from key): (c) 1.6 g. Composition is fixed, so Ca = 40% of 4 g = 1.6 g.

Teacher's Note: Law of constant proportions fixes the percentage.

Exam Note: Apply 40% directly to 4 g.

Question 42. The law of multiple proportion is illustrated by the two compounds:

(a) Sodium chloride and sodium bromide   (b) Ordinary water and heavy water   (c) Caustic soda and caustic potash   (d) Sulphur dioxide and sulphur trioxide

Solution. Answer (from key): (d) Sulphur dioxide and sulphur trioxide. SO2 and SO3 are two compounds of the same elements; oxygen per fixed S is 2 : 3.

Teacher's Note: Same two elements, different compounds.

Exam Note: NaCl and NaBr have different elements.

Question 43. All the substances listed below are fertilizers that contribute nitrogen to the soil. Which of these is the richest source of nitrogen on a mass percentage basis?

(a) Urea, (NH2)2CO   (b) Ammonium nitrate, NH4NO3   (c) Nitric oxide, NO   (d) Ammonia, NH3

Solution. Answer (from key): (d) Ammonia, NH3. Mass % N: urea 28/60 = 46.7; NH4NO3 28/80 = 35; NO 14/30 = 46.7; NH3 14/17 = 82.4. Richest is NH3.

Teacher's Note: Mass % = (mass of N in formula/molar mass) × 100.

Exam Note: Compare mass percentages, not atoms.

Question 44. One mole of element X has 0.444 times the mass of one mole of element Y. One atom of element X has 2.96 times the mass of one atom of 12C. What is the atomic weight of Y?

(a) 80   (b) 15.77   (c) 46.67   (d) 40.0

Solution. Answer (from key): (a) 80. Atomic mass of X = 2.96 × 12 = 35.52. Y = 35.52/0.444 = 80.

Teacher's Note: Atomic mass relative to C-12 = 12 × ratio.

Exam Note: Mole ratio equals atomic mass ratio.

Question 45. A given sample of pure compound contains 9.81 gm of Zn, 1.8×1023 atoms of chromium and 0.60 mole of oxygen atoms. What is the simplest formula?

(a) ZnCr2O7   (b) ZnCr2O4   (c) ZnCrO4   (d) ZnCrO6

Solution. Answer (from key): (b) ZnCr2O4. Zn = 9.81/65.4 = 0.15 mol; Cr = 1.8×1023/6.022×1023 = 0.30 mol; O = 0.60 mol. Ratio 1 : 2 : 4, so ZnCr2O4.

Teacher's Note: Convert everything to moles then divide by smallest.

Exam Note: Atoms count converts through NA.

Question 46. The formula of an acid is HXO2. The mass of 0.0242 moles of the acid is 1.657 g. What is the atomic weight of X?

(a) 35.5   (b) 28.1   (c) 128   (d) 19.0

Solution. Answer (from key): (a) 35.5. Molar mass = 1.657/0.0242 = 68.5. X = 68.5 − 1 − 32 = 35.5.

Teacher's Note: Subtract H and O2 masses from molar mass.

Exam Note: Answer is chlorine, HClO2.

Question 47. What is the empirical formula of vanadium oxide, if 2.74 g of the metal oxide contains 1.53 g of metal?

(a) V2O3   (b) VO   (c) V2O5   (d) V2O7

Solution. Answer (from key): (c) V2O5. V = 1.53 g (55.83%), O = 1.21 g (44.17%). Moles V = 1.53/51 = 0.030; O = 1.21/16 = 0.0756. Ratio 1 : 2.5 = 2 : 5, so V2O5.

Teacher's Note: Ratio 1 : 2.5 must be doubled to whole numbers.

Exam Note: Oxygen mass is oxide minus metal.

Question 48. Determine the empirical formula of Kelvar, used in making bullet proof vests, is composed of 70.6% C, 4.2% H, 11.8% N and 13.4% O:

(a) C7H5NO2   (b) C7H5N2O   (c) C7H9NO   (d) C7H5NO

Solution. Answer (from key): (d) C7H5NO. Moles: C 70.6/12 = 5.88; H 4.2; N 11.8/14 = 0.843; O 13.4/16 = 0.8375. Dividing by 0.84: C 7, H 5, N 1, O 1. Formula C7H5NO.

Teacher's Note: Divide by smallest mole value to get ratio.

Exam Note: Percent as grams in 100 g sample.

Question 49. The hydrated salt Na2CO3·xH2O undergoes 63% loss in mass on heating and becomes anhydrous. The value of x is:

(a) 10   (b) 12   (c) 8   (d) 18

Solution. Answer (from key): (a) 10. 18x/(106 + 18x) = 0.63 gives 18x = 66.78 + 11.34x, so 6.66x = 66.78 and x ≈ 10.

Teacher's Note: Water loss fraction equals water mass over hydrate mass.

Exam Note: Washing soda has x = 10.

Question 50. A 6.85 g sample of the hydrate Sr(OH)2·xH2O is dried in an oven to give 3.13 g of anhydrous Sr(OH)2. What is the value of x? (Atomic weights: Sr = 87.60, O = 16.0, H = 1.0)

(a) 8   (b) 12   (c) 10   (d) 6

Solution. Answer (from key): (a) 8. Sr(OH)2 = 121.6 g/mol; 3.13 g = 0.02574 mol. Water lost = 3.72 g = 0.2067 mol. x = 0.2067/0.02574 = 8.

Teacher's Note: x = moles of water per mole of anhydrous salt.

Exam Note: Water mass is hydrate minus anhydrous.

Question 51. What percentage of oxygen is present in the compound CaCO3·3Ca3(PO4)2?

(a) 23.3%   (b) 45.36%   (c) 41.94%   (d) 17.08%

Solution. Answer (from key): (c) 41.94%. Formula has Ca 10, C 1, P 6, O 27. Molar mass = 400 + 12 + 186 + 432 = 1030. O% = 432/1030 × 100 = 41.94%.

Teacher's Note: Count atoms across the whole formula, not each part.

Exam Note: Total O is 3 + 24 = 27.

Question 52. Dieldrin, an insecticide, contains C, H, Cl and O. Combustion of 29.72 mg of Dieldrin gave 41.21 mg CO2 and 5.63 mg of H2O. In a separate analysis 25.31 mg of Dieldrin was converted into 57.13 mg AgCl. What is the empirical formula of Dieldrin?

(a) C6H4Cl3O   (b) C6H8ClO   (c) C12H8Cl6O   (d) C6H4Cl3O2

Solution. Answer (from key): (c) C12H8Cl6O. C = 37.82%, H = 2.10%, Cl = 57.13 × 35.5/143.5 / 25.31 = 55.85%, O = 4.2% (by difference). Moles ratio C : H : Cl : O ≈ 12 : 8 : 6 : 1, so C12H8Cl6O.

Teacher's Note: Percent C, H, Cl from products; O by difference.

Exam Note: Cl uses a separate sample mass.

Question 53. A gaseous compound is composed of 85.7% by mass carbon and 14.3% by mass hydrogen. It's density is 2.28 g/litre at 300 K and 1.0 atm pressure. Determine the molecular formula of the compound:

(a) C2H2   (b) C2H4   (c) C4H8   (d) C4H10

Solution. Answer (from key): (c) C4H8. Empirical formula: C : H = 85.7/12 : 14.3/1 = 1 : 2, CH2. M = dRT/P = 2.28 × 0.0821 × 300 = 56.2. n = 56.2/14 = 4, so C4H8.

Teacher's Note: Empirical formula mass times n equals molar mass.

Exam Note: M = dRT/P from gas density.

Question 54. Complete combustion of 0.858 g of compound X gives 2.63 g of CO2 and 1.28 g of H2O. The lowest molecular mass X can have:

(a) 43 g   (b) 86 g   (c) 129 g   (d) 172 g

Solution. Answer: (b) 86 g. C = 2.63 × 12/44 = 0.717 g; H = 1.28 × 2/18 = 0.142 g; total 0.859 g, so a hydrocarbon. C : H = 0.0598 : 0.1422 ≈ 3 : 7, empirical C3H7 (43). Corrected: C3H7 has odd H and cannot be a molecule; lowest molecular formula is C6H14 = 86 g, option (b). (Key prints (a) 43 g, the empirical formula mass.)

Teacher's Note: Hydrocarbon molecules need an even hydrogen count.

Exam Note: Empirical mass 43 is not a valid molecular mass.

Question 55. The sulphate of a metal M contains 9.87% of M. This sulphate is isomorphous with ZnSO4·7H2O. The atomic weight of M is:

(a) 40.3   (b) 36.3   (c) 24.3   (d) 11.3

Solution. Answer (from key): (c) 24.3. Isomorphous with ZnSO4·7H2O, so salt is MSO4·7H2O (M + 222). M/(M + 222) = 0.0987 gives M = 24.3 (Mg).

Teacher's Note: Isomorphous means same formula type.

Exam Note: Include 7H2O in molar mass.

Question 56. In an organic compound of molar mass 108 gm mol−1 C, H and N atoms are present in 9 : 1 : 3.5 by weight. Molecular formula can be:

(a) C6H8N2   (b) C7H10N   (c) C5H6N3   (d) C4H18N3

Solution. Answer (from key): (a) C6H8N2. Mole ratio C : H : N = 9/12 : 1 : 3.5/14 = 0.75 : 1 : 0.25 = 3 : 4 : 1. Empirical C3H4N = 54; n = 108/54 = 2, giving C6H8N2.

Teacher's Note: Weight ratios convert to mole ratios first.

Exam Note: Empirical mass 54, so n = 2.

Question 57. On analysis, a certain compound was found to contain 254 g of iodine (at. mass 127) and 80 g of oxygen (at. mass 16). What is the formula of the compound?

(a) IO   (b) I2O   (c) I5O3   (d) I2O5

Solution. Answer (from key): (d) I2O5. I = 254/127 = 2 mol; O = 80/16 = 5 mol. Formula I2O5.

Teacher's Note: Mole ratio 2 : 5 gives formula directly.

Exam Note: Whole-number ratio already.

Question 58. An element A is tetravalent and another element B is divalent. The formula of the compound formed from these elements will be:

(a) A2B   (b) AB   (c) AB2   (d) A2B3

Solution. Answer (from key): (c) AB2. Criss-cross valencies: A2B4, simplified to AB2.

Teacher's Note: Criss-cross then reduce to lowest ratio.

Exam Note: Reduce A2B4 to AB2.

Question 59. A compound used in making nylon, is 43.8% oxygen. There are four oxygen atoms per molecule. What is the molecular weight of compound?

(a) 36   (b) 116   (c) 292   (d) 146

Solution. Answer (from key): (d) 146. 4 O = 64 g is 43.8% of the molar mass, so M = 64/0.438 = 146 (adipic acid).

Teacher's Note: Mass of O per molecule / fraction of O.

Exam Note: Four O atoms = 64 u.

Question 60. Suppose two elements X and Y combine to form two compounds XY2 and X2Y3 when 0.05 mole of XY2 weighs 5 g while 3.011×1023 molecules of X2Y3 weighs 85 g. The atomic masses of X and Y are respectively:

(a) 20, 30   (b) 30, 40   (c) 40, 30   (d) 80, 60

Solution. Answer (from key): (c) 40, 30. M(XY2) = 5/0.05 = 100; M(X2Y3) = 85/0.5 = 170. x + 2y = 100 and 2x + 3y = 170 give x = 40, y = 30.

Teacher's Note: Two molar masses give two simultaneous equations.

Exam Note: 3.011×1023 molecules is 0.5 mol.

Question 61. 44 g of a sample on complete combustion gives 88 gm CO2 and 36 gm of H2O. The molecular formula of the compound may be:

(a) C4H6   (b) C2H6O   (c) C2H4O   (d) C3H6O

Solution. Answer (from key): (c) C2H4O. CO2 = 2 mol (2 mol C = 24 g); H2O = 2 mol (4 mol H = 4 g). Remaining 44 − 28 = 16 g = 1 mol O. Formula C2H4O.

Teacher's Note: Oxygen by difference from total mass.

Exam Note: Check total of C, H, O masses equals 44 g.

Question 62. 40 milligram diatomic volatile substance (X2) is converted to vapour that displaced 4.92 mL of air at 1 atm and 300 K. Atomic weight of element X is nearly:

(a) 400   (b) 240   (c) 200   (d) 100

Solution. Answer (from key): (d) 100. n = PV/RT = (1 × 4.92×10−3)/(0.0821 × 300) = 2×10−4 mol. M(X2) = 0.040/2×10−4 = 200, so atomic weight of X = 100.

Teacher's Note: Vapour volume equals displaced air volume.

Exam Note: Halve molar mass for diatomic.

Question 63. Two element X (at. mass = 75) and Y (at. mass = 16) combine to give a compound having 75.8% of X. The formula of the compound is:

(a) XY   (b) X2Y   (c) X2Y2   (d) X2Y3

Solution. Answer (from key): (d) X2Y3. Moles X = 75.8/75 = 1.01; Y = 24.2/16 = 1.51. Ratio 2 : 3, so X2Y3.

Teacher's Note: Ratio 1 : 1.5 doubles to 2 : 3.

Exam Note: Y percent is 100 − 75.8.

Question 64. A sample of phosphorus that weighs 12.4 g exerts a pressure 8 atm in a 0.821 litre closed vessel at 527°C. The molecular formula of the phosphorus vapour is:

(a) P2   (b) P4   (c) P6   (d) P8

Solution. Answer (from key): (b) P4. n = PV/RT = (8 × 0.821)/(0.0821 × 800) = 0.1 mol. M = 12.4/0.1 = 124 = 4 × 31, so P4.

Teacher's Note: T = 527 + 273 = 800 K.

Exam Note: Molar mass 124 means four atoms.

Question 65. Manganese forms non-stoichiometric oxides having the general formula MnOx. The value of x for the compound that analyzed 64% by mass Mn:

(a) 1.16   (b) 1.83   (c) 2   (d) 1.93

Solution. Answer (from key): (d) 1.93. Mn = 64/55 = 1.164 mol; O = 36/16 = 2.25 mol. x = 2.25/1.164 = 1.93.

Teacher's Note: x is moles of O per mole of Mn.

Exam Note: Non-integer x is allowed here.

Question 66. 1.44 gram of titanium (At. wt. = 48) reacted with excess of O2 and produce x gram of non-stoichiometric compound Ti1.44O. The value of x is:

(a) 2   (b) 1.77   (c) 1.44   (d) none of these

Solution. Answer (from key): (b) 1.77. Ti1.44O has mass 48 × 1.44 + 16 = 85.12 g per mole formula, containing 1.44 mol Ti. 1.44/48 = 0.03 mol Ti gives 0.03/1.44 mol of compound; mass = 0.03/1.44 × 85.12 = 1.77 g.

Teacher's Note: Mole of Ti conserved: use mole ratio with formula mass.

Exam Note: Compound contains 1.44 Ti per formula.

Question 67. Which statement is false for the balanced equation given below? CS2 + 3O2 → 2SO2 + CO2 (a) One mole of CS2 will produce one mole of CO2 (b) The reaction of 16 g of oxygen produces 7.33 g of CO2 (c) The reaction of one mole of O2 will produce 2/3 mole of SO2 (d) Six molecules of oxygen requires three molecules of CS2

Solution. Answer (from key): (d). Six O2 molecules need 6/3 = 2 CS2 molecules, not three. Statements (a), (b) (16 g = 0.5 mol O2 gives 1/6 mol = 7.33 g CO2) and (c) are true. False statement is (d).

Teacher's Note: Use the 1 : 3 mole ratio of CS2 to O2.

Exam Note: Check each statement against coefficients.

Question 68. Which of the following setups is correct to calculate the weight (in g) of KClO3 produced from the reaction of 0.150 moles of Cl2? 3Cl2 + 6KOH → 5KCl + KClO3 + 3H2O

(a) 0.150 moles Cl2 × (1 mole KClO3/3 moles Cl2) × (122.5 g/1 mole KClO3)   (b) 0.150 moles Cl2 × 1 mole KClO3/3 moles Cl2 × 1 mole KClO3/122.5 g   (c) 0.150 moles Cl2 × 3 moles Cl2/1 mole KClO3 × 122.5 g/1 mole KClO3   (d) 0.150 moles Cl2 × 3 moles Cl2/1 mole KClO3 × 1 mole KClO3/122.5 g

Solution. Answer (from key): (a) 0.150 moles Cl2 × (1 mole KClO3/3 moles Cl2) × (122.5 g/1 mole KClO3). 3 mol Cl2 give 1 mol KClO3, so multiply by 1/3 and then by molar mass 122.5 g/mol. Setup (a) is correct (0.150/3 × 122.5 = 6.125 g).

Teacher's Note: Units must cancel: mol Cl2 to mol KClO3 to g.

Exam Note: Mole ratio factor must put KClO3 on top.

Question 69. 2.0 g sample contain mixture of SiO2 and Fe2O3, on very strong heating leave a residue weighing 1.96 g. The reaction responsible for loss of weight is Fe2O3(s) → Fe3O4(s) + O2(g), (unbalance equation). What is the percentage by mass of SiO2 in original sample?

(a) 10%   (b) 20%   (c) 40%   (d) 60%

Solution. Answer (from key): (c) 40%. 3Fe2O3 → 2Fe3O4 + ½O2: 480 g Fe2O3 loses 16 g. Loss = 0.04 g, so Fe2O3 = 0.04 × 480/16 = 1.2 g. SiO2 = 0.8 g = 40%.

Teacher's Note: Balance first; weight loss is O2 only.

Exam Note: SiO2 does not decompose.

Question 70. What volume of air at 1 atm and 273 K containing 21% of oxygen by volume is required to completely burn sulphur (S8) present in 200 g of sample, which contains 20% inert material which does not burn. Sulphur burns according to the reaction (1/8)S8(s) + O2(g) → SO2(g)

(a) 23.52 litre   (b) 320 litre   (c) 112 litre   (d) 533.33 litre

Solution. Answer (from key): (d) 533.33 litre. S in sample = 160 g = 160/256 = 0.625 mol S8 = 5 mol S atoms, needing 5 mol O2 = 112 L. Air = 112 × 100/21 = 533.33 L.

Teacher's Note: Only 80% is sulphur; air is 21% O2.

Exam Note: Reaction is 1/8 S8 per O2.

Question 71. For the reaction, 2Fe(NO3)3 + 3Na2CO3 → Fe2(CO3)3 + 6NaNO3. Initially if 2.5 mole of Fe(NO3)3 and 3.6 mole of Na2CO3 is taken. If 6.3 mole of NaNO3 is obtained then % yield of given reaction is:

(a) 50   (b) 84   (c) 87.5   (d) 100

Solution. Answer (from key): (c) 87.5. Mole/coefficient: Fe(NO3)3 1.25; Na2CO3 1.2, so Na2CO3 is limiting. Theoretical NaNO3 = 3.6 × 2 = 7.2 mol. Yield = 6.3/7.2 × 100 = 87.5%.

Teacher's Note: Find limiting reagent by mole/coefficient.

Exam Note: Yield is relative to limiting reagent.

Question 72. How many moles of P4 can be produced by reaction of 0.10 moles Ca5(PO4)3F, 0.36 moles SiO2 and 0.90 moles C according to the following reaction? 4Ca5(PO4)3F + 18SiO2 + 30C → 3P4 + 2CaF2 + 18CaSiO3 + 30CO

(a) 0.060   (b) 0.030   (c) 0.045   (d) 0.075

Solution. Answer (from key): (a) 0.060. Mole/coefficient: 0.10/4 = 0.025; 0.36/18 = 0.020; 0.90/30 = 0.030. SiO2 limits. P4 = 0.36 × 3/18 = 0.060 mol.

Teacher's Note: Smallest mole/coefficient is limiting.

Exam Note: Use the 3 : 18 ratio of P4 to SiO2.

Question 73. Some older emergency oxygen masks containing potassium superoxide, KO2 which reacts with CO2 and water in exhaled air to produce oxygen according to the given equation. If a person exhales 0.667 g of CO2 per minute, how many grams of KO2 are consumed in 5.0 minutes? 4KO2 + 2H2O + 4CO2 → 4KHCO3 + 3O2

(a) 10.7   (b) 0.0757   (c) 1.07   (d) 5.38

Solution. Answer (from key): (d) 5.38. CO2 in 5 min = 3.335 g = 0.0758 mol. KO2 : CO2 = 1 : 1, so KO2 = 0.0758 mol × 71 = 5.38 g.

Teacher's Note: Total time first; then 1 : 1 mole ratio.

Exam Note: KO2 molar mass is 71.

Question 74. The mass of N2F4 produced by the reaction of 2.0 g of NH3 and 8.0 g of F2 is 3.56 g. What is the per cent yield? 2NH3 + 5F2 → N2F4 + 6HF

(a) 79.0   (b) 71.2   (c) 84.6   (d) None of these

Solution. Answer (from key): (d) None of these. NH3 = 0.1176 mol (/2 = 0.0588); F2 = 0.2105 mol (/5 = 0.0421), so F2 limits. N2F4 theoretical = 0.0421 × 104 = 4.38 g. Yield = 3.56/4.38 = 81.3%, so none of these.

Teacher's Note: Actual yield / theoretical from limiting reagent.

Exam Note: Compute F2 as 38 g/mol.

Question 75. Calculate the weight of lime (CaO) obtained by heating 200 kg of 95% pure lime stone (CaCO3):

(a) 104.4 kg   (b) 105.4 kg   (c) 212.8 kg   (d) 106.4 kg

Solution. Answer (from key): (d) 106.4 kg. CaCO3 = 190 kg. CaCO3 → CaO + CO2: CaO = 190 × 56/100 = 106.4 kg.

Teacher's Note: Take 95% purity before the mass ratio 56/100.

Exam Note: Only pure CaCO3 reacts.

Question 76. Phosphoric acid (H3PO4) prepared in a two step process. (1) P4 + 5O2 → P4O10 (2) P4O10 + 6H2O → 4H3PO4. We allow 62 g of phosphorus to react with excess oxygen which form P4O10 in 85% yield. In the step (2) reaction 90% yield of H3PO4 is obtained. Produced mass of H3PO4 is:

(a) 37.485 g   (b) 149.949 g   (c) 125.47 g   (d) 564.48 g

Solution. Answer (from key): (b) 149.949 g. P = 62/31 = 2 mol; H3PO4 = 2 × 0.85 × 0.90 × 98 = 149.94 g (one P gives one H3PO4).

Teacher's Note: P atom conservation; multiply the two yields.

Exam Note: Overall yield is 0.85 × 0.90.

Question 77. 9 moles of "D" and 14 moles of E are allowed to react in a closed vessel according to given reactions. Calculate number of moles of B formed in the end of reaction, if 4 moles of G are present in reaction vessel. (Percentage yield of reaction is mentioned in the reaction) Step-1: 3D + 4E → 5C + A (80% yield). Step-2: 3C + 5G → 6B + F (50% yield).

(a) 2.4   (b) 30   (c) 4.8   (d) 1

Solution. Answer (from key): (a) 2.4. Step 1: D/3 = 3 and E/4 = 3.5, so D limits; C = 9/3 × 5 × 0.80 = 12 mol. Step 2: C/3 = 4 and G/5 = 0.8, so G limits; B = 4/5 × 6 × 0.50 = 2.4 mol.

Teacher's Note: Check the limiting reagent separately at each step.

Exam Note: Apply each step's yield to its own product.

Question 78. The chief ore of Zn is the sulphide, ZnS. The ore is concentrated by froth floatation process and then heated in air to convert ZnS to ZnO. 2ZnS + 3O2 → 2ZnO + 2SO2 (80%); ZnO + H2SO4 → ZnSO4 + H2O (100%); 2ZnSO4 + 2H2O → 2Zn + 2H2SO4 + O2 (80%). The number of moles of ZnS required for producing 2 moles of Zn will be:

(a) 3.125   (b) 2   (c) 2.125   (d) 4

Solution. Answer (from key): (a) 3.125. Working backwards: ZnSO4 needed = 2/0.80 = 2.5 mol; ZnO needed = 2.5/1.00 = 2.5 mol; ZnS needed = 2.5/0.80 = 3.125 mol.

Teacher's Note: Divide by each step's yield, working backwards.

Exam Note: One Zn needs one ZnS: mole conservation.

Question 79. 0.8 mole of a mixture of CO and CO2 requires exactly 40 gram of NaOH in solution for complete conversion of all the CO2 into Na2CO3. How many moles more of NaOH would it require for conversion into Na2CO3, if the mixture (0.8 mole) is completely oxidised to CO2?

(a) 0.2   (b) 0.6   (c) 1   (d) 1.5

Solution. Answer (from key): (b) 0.6. CO2 + 2NaOH → Na2CO3 + H2O. NaOH = 1 mol, so CO2 = 0.5 mol and CO = 0.3 mol. Oxidising CO gives 0.3 mol more CO2, needing 0.3 × 2 = 0.6 mol more NaOH.

Teacher's Note: Only CO2 reacts with NaOH; CO adds 0.3 mol on oxidation.

Exam Note: NaOH : CO2 is 2 : 1.

Question 80. Silver oxide (Ag2O) decomposes at temperature 300°C yielding metallic silver and oxygen gas. A 1.60 g sample of impure silver oxide yields 0.104 g of oxygen gas. What is the per cent by mass of the silver oxide in the sample?

(a) 5.9   (b) 47.125   (c) 94.25   (d) 88.2

Solution. Answer (from key): (c) 94.25. 2Ag2O → 4Ag + O2. O2 = 0.104/32 = 0.00325 mol; Ag2O = 0.0065 mol × 232 = 1.508 g. % = 1.508/1.60 × 100 = 94.25%.

Teacher's Note: Two moles of oxide per mole of O2.

Exam Note: Molar mass of Ag2O is 232.

Question 81. 342 gm of 20% by mass of Ba(OH)2 solution (sp. gr. 0.57) is reacted with 1200 mL of 2 M HNO3. If the final density is same as pure water then molarity of the ion in resulting solution by nature of the above solution is, identified, is:

(a) 0.25   (b) 0.5 M   (c) 0.888 M   (d) None of these

Solution. Answer (from key): (c) 0.888 M. Ba(OH)2 = 20 × 342/(100 × 171) = 0.4 mol, so OH− = 0.8 mol. HNO3 = 2.4 mol. Excess H+ = 1.6 mol (acidic). Volume = 1200 + 342/0.57 = 1800 mL. [H+] = 1.6/1.8 = 0.888 M.

Teacher's Note: Neutralise OH− with H+; the excess ion sets molarity.

Exam Note: Volume of Ba(OH)2 solution = mass/density.

Question 82. 100 mL of H2SO4 solution having molarity 1 M and density 1.5 g/mL is mixed with 400 mL of water. Calculate final molarity of H2SO4 solution, if final density is 1.25 g/mL:

(a) 4.4 M   (b) 0.145 M   (c) 0.52 M   (d) 0.227 M

Solution. Answer (from key): (d) 0.227 M. Moles H2SO4 = 0.1. Total mass = 150 + 400 = 550 g; volume = 550/1.25 = 440 mL. M = 0.1/0.440 = 0.227 M.

Teacher's Note: Final volume from final mass and density; volumes are not additive.

Exam Note: Mass is additive, volume is not.

Question 83. What volume of HCl solution of density 1.2 g/cm3 and containing 36.5% by weight HCl, must be allowed to react with zinc (Zn) in order to liberate 4.0 g of hydrogen?

(a) 333.33 mL   (b) 500 mL   (c) 614.66 mL   (d) None of these

Solution. Answer (from key): (a) 333.33 mL. Zn + 2HCl → ZnCl2 + H2. 4 g H2 = 2 mol, so HCl = 4 mol = 146 g. Solution mass = 146/0.365 = 400 g; volume = 400/1.2 = 333.33 mL.

Teacher's Note: Moles of H2 give HCl by 1 : 2; then use density.

Exam Note: Convert HCl mass to solution mass via 36.5%.

Question 84. An ideal gaseous mixture of ethane (C2H6) and ethene (C2H4) occupies 28 litre at 1 atm and 273 K. The mixture reacts completely with 128 g O2 to produce CO2 and H2O. Mole fraction of C2H6 in the mixture is:

(a) 0.6   (b) 0.4   (c) 0.5   (d) 0.8

Solution. Answer (from key): (b) 0.4. Total gas = 1.25 mol; O2 = 4 mol. Let C2H6 = x: 3.5x + 3(1.25 − x) = 4 gives x = 0.5 mol. Mole fraction = 0.5/1.25 = 0.4.

Teacher's Note: Two equations: total moles and O2 consumed.

Exam Note: C2H6 needs 3.5 O2, C2H4 needs 3.

Question 85. Wood's metal contains 50.0% bismuth, 25.0% lead, 12.5% tin and 12.5% cadmium by weight. What is the mole fraction of tin? (Atomic weights: Bi = 209, Pb = 207, Sn = 119, Cd = 112)

(a) 0.202   (b) 0.158   (c) 0.176   (d) 0.221

Solution. Answer (from key): (c) 0.176. Moles in 100 g: Bi 0.2392; Pb 0.1208; Sn 0.1050; Cd 0.1116; total 0.5767. Mole fraction of Sn = 0.1050/0.5767 = 0.182. Key gives (c) 0.176; none of the options matches exactly, (c) is nearest.

Teacher's Note: Mole fraction = moles of Sn / total moles.

Exam Note: Printed option values do not match exactly.

Question 86. The density of a 56.0% by weight aqueous solution of 1-propanol (CH3CH2CH2OH) is 0.8975 g/cm3. What is the mole fraction of the compound?

(a) 0.292   (b) 0.227   (c) 0.241   (d) 0.276

Solution. Answer (from key): (d) 0.276. In 100 g: propanol = 56/60 = 0.933 mol; water = 44/18 = 2.444 mol. X = 0.933/3.378 = 0.276.

Teacher's Note: Density is not needed for mole fraction.

Exam Note: Density given is a distractor.

Question 87. What is the molarity of SO42− ion in aqueous solution that contain 34.2 ppm of Al2(SO4)3? (Assume complete dissociation and density of solution 1 g/mL)

(a) 3×10−4 M   (b) 2×10−4 M   (c) 10−4 M   (d) None of these

Solution. Answer (from key): (a) 3×10−4 M. 34.2 ppm = 34.2 mg per litre = 34.2×10−3/342 = 10−4 M Al2(SO4)3. Each gives 3 SO42−, so 3×10−4 M.

Teacher's Note: ppm with density 1 means mg per litre.

Exam Note: Multiply by 3 for sulphate ions.

Question 88. The relation between molarity (M) and molality (m) is given by: (ρ = density of solution (mg/mL), M1 = molecular weight of solute)

(a) m = 1000M/(1000ρ − M1)   (b) m = 1000ρM/(1000ρ − MM1)   (c) m = 1000MM/(1000ρ − MM1)   (d) m = 1000M/(1000ρ − MM1)

Solution. Answer (from key): (d) m = 1000M/(1000ρ − MM1). Per litre: solution mass = 1000ρ g, solute mass = MM1 g, solvent = 1000ρ − MM1 g. Molality = M/[(1000ρ − MM1)/1000] = 1000M/(1000ρ − MM1), with ρ in g/mL.

Teacher's Note: Solvent mass = solution mass − solute mass per litre.

Exam Note: Printed unit 'mg/mL' should read g/mL.

Question 89. Molarity and molality of a solution of an liquid (mol. wt. = 50) in aqueous solution is 9 and 10 respectively. What is the density of solution?

(a) 1 g/cc   (b) 0.95 g/cc   (c) 1.05 g/cc   (d) 1.35 g/cc

Solution. Answer (from key): (d) 1.35 g/cc. m = 1000M/(1000d − MM1): 10 = 9000/(1000d − 450), so 1000d = 1350 and d = 1.35 g/cc.

Teacher's Note: Rearrange the M to m relation for density.

Exam Note: Use M1 = 50 in the denominator.

Question 90. An aqueous solution of ethanol has density 1.025 g/mL and it is 2 M. What is the molality of this solution?

(a) 1.79   (b) 2.143   (c) 1.951   (d) None of these

Solution. Answer (from key): (b) 2.143. 1 L solution = 1025 g; ethanol = 2 × 46 = 92 g; water = 933 g. Molality = 2/0.933 = 2.143.

Teacher's Note: Mass of solvent = solution mass − solute mass.

Exam Note: Ethanol molar mass is 46.

Question 91. 0.2 mole of HCl and 0.2 mole of barium chloride were dissolved in water to produce a 500 mL solution. The molarity of Cl− ions is:

(a) 0.06 M   (b) 0.09 M   (c) 1.2 M   (d) 0.80 M

Solution. Answer (from key): (c) 1.2 M. Cl− = 0.2 (HCl) + 0.4 (BaCl2) = 0.6 mol in 0.5 L = 1.2 M.

Teacher's Note: BaCl2 gives two chloride ions per unit.

Exam Note: Add chloride from both sources.

Question 92. Calculate the mass of anhydrous HCl in 10 mL of concentrated HCl (density = 1.2 g/mL) solution having 37% HCl by weight.

(a) 4.44 g   (b) 4.44 mg   (c) 4.44×10−3 mg   (d) 0.444 µg

Solution. Answer (from key): (a) 4.44 g. Mass of solution = 10 × 1.2 = 12 g; HCl = 0.37 × 12 = 4.44 g.

Teacher's Note: Mass = volume × density × mass fraction.

Exam Note: Keep track of grams versus milligrams.

Question 93. Calculate the molality of 1 L solution of 80% H2SO4 (w/V), given that the density of the solution is 1.80 g mL−1.

(a) 8.16   (b) 8.6   (c) 1.02   (d) 10.8

Solution. Answer (from key): (a) 8.16. 80% w/V: 800 g H2SO4 (8.163 mol) in 1 L. Solution mass = 1800 g, water = 1000 g. Molality = 8.163/1 = 8.16 mol/kg.

Teacher's Note: w/V gives solute; density gives solution mass.

Exam Note: Solvent = 1800 − 800 = 1000 g.

Question 94. Fluoxymesterone, C20H29FO3, is an anabolic steroid. A 500 mL solution is prepared by dissolving 10.0 mg of the steroid in water, 1.0 mL portion of this solution is diluted to a final volume of 1.00 L. What is the resulting molarity?

(a) 1.19×10−10   (b) 1.19×10−7   (c) 5.95×10−8   (d) 2.38×10−11

Solution. Answer (from key): (c) 5.95×10−8. M = 336. 10 mg = 2.976×10−5 mol in 0.5 L = 5.95×10−5 M. Diluting 1 mL to 1000 mL (1000 times): 5.95×10−8 M.

Teacher's Note: Molar mass first; dilution factor 1000.

Exam Note: Convert mg to g carefully.

Question 95. The lead nitrate, Pb(NO3)2, in 25 mL of a 0.15 M solution reacts with all of the aluminium sulphate, Al2(SO4)3, in 20 mL of solution. What is the molar concentration of the Al2(SO4)3? 3Pb(NO3)2 + Al2(SO4)3 → 3PbSO4 + 2Al(NO3)3

(a) 6.25×10−2 M   (b) 2.421×10−2 M   (c) 0.1875 M   (d) None of these

Solution. Answer (from key): (a) 6.25×10−2 M. Pb(NO3)2 = 25 × 0.15 = 3.75 mmol. Al2(SO4)3 = 3.75/3 = 1.25 mmol in 20 mL = 0.0625 M.

Teacher's Note: Use the 3 : 1 mole ratio then divide by volume.

Exam Note: Moles in mmol with mL.

Question 96. Concentrated HNO3 is 63% HNO3 by mass and has a density of 1.4 g/mL. How many millilitres of this solution are required to prepare 250 mL of a 1.20 M HNO3 solution?

(a) 18.0   (b) 21.42   (c) 20.0   (d) 14.21

Solution. Answer (from key): (b) 21.42. M = 0.63 × 1.4 × 1000/63 = 14 M. M1V1 = M2V2: V = 1.20 × 250/14 = 21.43 mL.

Teacher's Note: Convert mass % and density into molarity, then dilute.

Exam Note: M = 10 × % × d / molar mass.

Question 97. 50 mL of 20.8% (w/V) BaCl2 (aq) and 100 mL of 9.8% (w/V) H2SO4 (aq) solutions are mixed. Molarity of Cl− ions in the resulting solution is: (At. wt. of Ba = 137)

(a) 0.333 M   (b) 0.666 M   (c) 0.1 M   (d) 1.33 M

Solution. Answer (from key): (b) 0.666 M. BaCl2 = 10.4 g/208 = 0.05 mol, giving Cl− = 0.1 mol; H2SO4 = 0.1 mol. BaSO4 precipitates; Cl− stays (as HCl). [Cl−] = 0.1/0.150 L = 0.666 M.

Teacher's Note: Chloride is a spectator; divide by total volume.

Exam Note: Total volume is 150 mL.

Question 98. 100 mL of 10% NaOH (w/V) is added to 100 mL of 10% HCl (w/V). The resultant solution becomes:

(a) alkaline   (b) strongly alkaline   (c) acidic   (d) neutral

Solution. Answer (from key): (c) acidic. NaOH = 10/40 = 0.25 mol; HCl = 10/36.5 = 0.274 mol. HCl is in excess, so solution is acidic.

Teacher's Note: Compare moles, not masses.

Exam Note: Equal masses do not mean equal moles.

Question 99. How many millilitres of 0.1 M H2SO4 must be added to 50 mL of 0.1 M NaOH to give a solution that has a concentration of 0.05 M in H2SO4?

(a) 400 mL   (b) 200 mL   (c) 100 mL   (d) None of these

Solution. Answer (from key): (c) 100 mL. Let V mL be added. NaOH 5 mmol uses 2.5 mmol H2SO4. Remaining (0.1V − 2.5)/(V + 50) = 0.05, so V = 100 mL.

Teacher's Note: NaOH consumes half its moles of H2SO4.

Exam Note: Set final concentration over total volume.

Question 100. 1 M HCl and 2 M HCl are mixed in volume ratio of 4 : 1. What is the final molarity of HCl solution?

(a) 1.5   (b) 1   (c) 1.2   (d) 1.8

Solution. Answer (from key): (c) 1.2. M = (4 × 1 + 1 × 2)/5 = 1.2 M.

Teacher's Note: Weighted average by volumes.

Exam Note: Moles add, volumes add.

Question 101. Three solutions X, Y, Z of HCl are mixed to produce 100 mL of 0.1 M solution. The molarities of X, Y and Z are 0.07 M, 0.12 M and 0.15 M respectively. What respective volumes of X, Y and Z should be mixed?

(a) 50 mL, 25 mL, 25 mL   (b) 20 mL, 60 mL, 20 mL   (c) 40 mL, 30 mL, 30 mL   (d) 55 mL, 20 mL, 25 mL

Solution. Answer (from key): (d) 55 mL, 20 mL, 25 mL. Total millimoles needed = 100 × 0.1 = 10. Checking: (a) 3.5 + 3 + 3.75 = 10.25; (b) 1.4 + 7.2 + 3 = 11.6; (c) 2.8 + 3.6 + 4.5 = 10.9; (d) 3.85 + 2.4 + 3.75 = 10.0. So (d).

Teacher's Note: Test each option for total millimoles equal to 10.

Exam Note: Volumes also sum to 100 mL.

Question 102. A bottle of an aqueous H2O2 solution is labelled as '28 V' H2O2 and the density of the solution (in g/mL) is 1.25. Choose the correct option:

(a) Molality of H2O2 solution is 2   (b) Molarity of H2O2 solution is 5   (c) Molality of H2O2 solution is 2.15   (d) None of these

Solution. Answer (from key): (c) Molality of H2O2 solution is 2.15. M = 28/11.2 = 2.5. Per litre: H2O2 = 85 g, solution = 1250 g, water = 1165 g. Molality = 2.5/1.165 = 2.15 m.

Teacher's Note: Volume strength / 11.2 gives molarity.

Exam Note: Water mass = 1250 − 85 g.

Question 103. The impure 6 g of NaCl is dissolved in water and then treated with excess of silver nitrate solution. The weight of precipitate of silver chloride is found to be 14 g. The % purity of NaCl solution would be:

(a) 95%   (b) 85%   (c) 75%   (d) 65%

Solution. Answer (from key): (a) 95%. AgCl = 14/143.5 = 0.0976 mol, so NaCl = 0.0976 mol × 58.5 = 5.71 g. Purity = 5.71/6 × 100 = 95%.

Teacher's Note: Mole of NaCl equals mole of AgCl.

Exam Note: Purity compares pure NaCl to 6 g sample.

Question 104. Al2(SO4)3 solution of 1 molal concentration is present in 1 litre solution of 2.684 g/cc. How many moles of BaSO4 would be precipitated on adding BaCl2 in excess?

(a) 2 moles   (b) 3 moles   (c) 6 moles   (d) 12 moles

Solution. Answer (from key): (c) 6 moles. Let x mol salt in 1 L: mass of solvent = 2684 − 342x g. Molality = x/[(2684 − 342x)/1000] = 1 gives x = 2. Sulphate = 3 × 2 = 6 mol, so 6 mol BaSO4.

Teacher's Note: Molality fixes moles in the litre; then 3 sulphates each.

Exam Note: Solvent mass excludes solute mass.

Question 105. A certain public water supply contains 0.10 ppb (part per billion) of chloroform (CHCl3). How many molecules of CHCl3 would be obtained in 0.478 mL drop of this water? (assumed d = 1 g/mL)

(a) 4×10−3 × NA   (b) 10−3 × NA   (c) 4×10−10 × NA   (d) None of these

Solution. Answer: (d) None of these. 0.10 ppb = 0.10 g per 109 g. In 0.478 g water: CHCl3 = 0.478 × 10−10 g = 4.78×10−11 g = 4×10−13 mol (M = 119.5). Corrected: 4×10−13 NA molecules, so (d) none of these. (Key prints (a) 4×10−3 NA, a power-of-ten slip.)

Teacher's Note: ppb is 10−9 by mass; convert drop to grams.

Exam Note: Check powers of ten; key value is wrong.

Question 106. Decreasing order (first having highest and then others following it) of mass of pure NaOH in each of the aqueous solution: (i) 50 g of 40% (w/W) NaOH (ii) 50 mL of 50% (w/V) NaOH [dsoln. = 1.2 g/mL] (iii) 50 g of 15 M NaOH [dsoln. = 1 g/mL]

(a) i, ii, iii   (b) iii, ii, i   (c) ii, iii, i   (d) ii, i, iii

Solution. Answer (from key): (b) iii, ii, i. (i) 0.40 × 50 = 20 g. (ii) 50% w/V: 25 g per 50 mL. (iii) 50 g at d = 1 is 50 mL; 15 M gives 0.75 mol = 30 g. Order: iii, ii, i.

Teacher's Note: Compute grams of NaOH for each case.

Exam Note: w/V needs volume; density only for converting mass.

Question 107. What is the molar mass of diacidic organic Lewis base (B), if 12 g of chloroplatinate salt (BH2PtCl6) on ignition produced 5 gm residue of Pt?

(a) 52   (b) 58   (c) 88   (d) None of these

Solution. Answer (from key): (b) 58. Pt = 5/195 = 0.02564 mol = moles of salt. M(salt) = 12/0.02564 = 468 = MB + 2 + 195 + 213. So MB = 58.

Teacher's Note: One Pt per salt; subtract H2PtCl6 mass.

Exam Note: Salt BH2PtCl6 includes 2 H.

Question 108. One gram of the silver salt of an organic dibasic acid yields, on strong heating, 0.5934 g of silver. If the weight percentage of carbon in it is 8 times the weight percentage of hydrogen and one-half the weight percentage of oxygen, determine the molecular formula of the acid.

(a) C4H6O4   (b) C4H6O6   (c) C2H6O2   (d) C5H10O5

Solution. Answer (from key): (b) C4H6O6. Ag = 0.5934/108 = 5.494 mmol, so salt (Ag2X) = 2.747 mmol; M = 364. Acid M = 364 − 216 + 2 = 150. C : H : O mass ratio = 8 : 1 : 16 gives C4H6O6 (48 + 6 + 96 = 150).

Teacher's Note: Silver salt mass gives acid mass; ratio 8 : 1 : 16 gives formula.

Exam Note: Dibasic acid forms Ag2X.

Question 109. 0.607 g of a silver salt of tribasic organic acid was quantitatively reduced to 0.37 g of pure Ag. What is the mol. wt. of the acid?

(a) 207   (b) 210   (c) 531   (d) 324

Solution. Answer (from key): (b) 210. Ag = 0.37/108 = 3.426 mmol; tribasic salt Ag3A is 1/3 of that = 1.142 mmol. M(salt) = 0.607/0.001142 = 531. Acid = 531 − 324 + 3 = 210.

Teacher's Note: Subtract 3 Ag and add 3 H.

Exam Note: Tribasic acid forms Ag3A.

Question 110. A sample of peanut oil weighing 2 g is added to 25 mL of 0.40 M KOH. After saponification is complete, 8.5 mL of 0.28 M H2SO4 is needed to neutralize excess of KOH. The saponification number of peanut oil is: (saponification number is defined as the milligrams of KOH consumed by 1 g of oil)

(a) 146.72   (b) 223.44   (c) 98.9   (d) None of these

Solution. Answer (from key): (a) 146.72. KOH taken = 25 × 0.40 = 10 mmol; excess = 8.5 × 0.28 × 2 = 4.76 mmol. Used = 5.24 mmol × 56 = 293.4 mg per 2 g, so number = 146.7.

Teacher's Note: Subtract excess KOH, then mg per gram of oil.

Exam Note: H2SO4 is dibasic: factor 2.

Question 111. 20 mL of a mixture of CO and H2 were mixed with excess of O2 and exploded and cooled. There was a volume contraction of 18 mL. All volume measurements corresponds to room temperature (27°C) and one atmosphere pressure. Determine the volume ratio V1 : V2 of CO and H2 in the original mixture.

(a) 1 : 2   (b) 3 : 2   (c) 2 : 3   (d) 4 : 1

Solution. Answer (from key): (b) 3 : 2. CO + ½O2 → CO2 contracts 0.5 per volume of CO; H2 + ½O2 → H2O(l) contracts 1.5. x + y = 20; 0.5x + 1.5y = 18 gives y = 8, x = 12. Ratio 3 : 2.

Teacher's Note: Contractions differ for CO (0.5) and H2 (1.5); water is liquid.

Exam Note: Water condenses on cooling.

Question 112. In the reaction, 2Al(s) + 6HCl(aq) → 2Al3+(aq) + 6Cl−(aq) + 3H2(g)

(a) 6 L HCl(aq) is consumed for every 3 L H2(g) produced   (b) 33.6 L H2(g) is produced regardless of temperature and pressure for every mole Al that reacts   (c) 67.2 L H2(g) at 1 atm and 273 K is produced for every mole Al that reacts   (d) 11.2 L H2(g) at 1 atm and 273 K is produced for every mole HCl(aq) consumed

Solution. Answer (from key): (d) 11.2 L H2(g) at 1 atm and 273 K is produced for every mole HCl(aq) consumed. 1 mol HCl gives 0.5 mol H2 = 11.2 L at STP. (a) mixes litres of solution and gas; (b) volume depends on T and P; (c) 1 mol Al gives 1.5 mol = 33.6 L. So (d).

Teacher's Note: Gas volume depends on T and P; liquids are by moles.

Exam Note: Mole ratio HCl : H2 = 2 : 1.

Question 113. The percentage by volume of C3H8 in a gaseous mixture of C3H8, CH4 and CO is 20. When 100 mL of the mixture is burnt in excess of O2, the volume of CO2 produced is:

(a) 90 mL   (b) 160 mL   (c) 140 mL   (d) none of these

Solution. Answer (from key): (c) 140 mL. C3H8 = 20 mL gives 60 mL CO2. The remaining 80 mL (CH4 and CO) each give one volume of CO2 per volume: 80 mL. Total = 140 mL.

Teacher's Note: Each carbon atom gives one CO2: C3H8 gives 3.

Exam Note: CH4 and CO both yield 1 : 1.

Question 114. 40 mL gaseous mixture of CO, CH4 and Ne was exploded with 10 mL of oxygen. On cooling, the gases occupied 36.5 mL. After treatment with KOH the volume reduced by 9 mL and again on treatment with alkaline pyrogallol, the volume further reduced. Percentage of CH4 in the original mixture is:

(a) 22.5   (b) 77.5   (c) 7.5   (d) 15

Solution. Answer (from key): (d) 15. Let CO = x, CH4 = y, Ne = z. CO2 formed x + y = 9 (KOH). Remaining O2 = 10 − x/2 − 2y. Final: z + 9 + 10 − x/2 − 2y = 36.5 with x + y + z = 40, which simplifies to 1.5x + 3y = 22.5. With x + y = 9: y = 6, x = 3. CH4 = 6/40 × 100 = 15%.

Teacher's Note: Three volume equations: CO2 by KOH, total, and final.

Exam Note: Water condenses on cooling; CO2 absorbed by KOH.

Question 115. A gaseous mixture of propane and butane of volume 3 litre on complete combustion produces 11.0 litre CO2 under standard conditions of temperature and pressure. The ratio of volume of butane to propane is:

(a) 1 : 2   (b) 2 : 1   (c) 3 : 2   (d) 3 : 1

Solution. Answer (from key): (b) 2 : 1. Let propane = V: 3V + 4(3 − V) = 11 gives V = 1 L, butane = 2 L. Ratio butane : propane = 2 : 1.

Teacher's Note: Propane gives 3 CO2, butane gives 4.

Exam Note: Report butane to propane in that order.

Question 116. Phosphorus has the oxidation state of +1 in:

(a) Orthophosphoric acid   (b) Phosphorus acid   (c) Hypophosphorous acid   (d) Metaphosphoric acid

Solution. Answer (from key): (c) Hypophosphorous acid. H3PO2: 3(+1) + x − 4 = 0, x = +1. Other acids give +5, +3, +5.

Teacher's Note: Compute P oxidation state from H and O.

Exam Note: Hypophosphorous acid is H3PO2.

Question 117. The oxidation state(s) of Cl in CaOCl2 (bleaching powder) is/are:

(a) +1 only   (b) −1 only   (c) +1 and −1   (d) none of these

Solution. Answer (from key): (c) +1 and −1. CaOCl2 = Ca(OCl)Cl: Cl in OCl− is +1, Cl− is −1.

Teacher's Note: Bleaching powder is a mixed salt: Ca(OCl)Cl.

Exam Note: Two different chlorine environments.

Question 118. The oxidation number of sulphur in S8, S2F2, H2S and H2SO4 respectively are:

(a) 0, +1, −2 and 6   (b) +2, 0, +2 and 6   (c) 0, +1, +2 and 4   (d) −2, 0, +2 and 6

Solution. Answer (from key): (a) 0, +1, −2 and 6. S8 element: 0; S2F2: 2x − 2 = 0, +1; H2S: −2; H2SO4: +6.

Teacher's Note: Fluorine is always −1.

Exam Note: Elements in standard state are zero.

Question 119. Fe shows an oxidation state of +1 in:

(a) Fe(CO)5   (b) [Fe(H2O)5NO]SO4   (c) Fe4[Fe(CN)6]3   (d) FeCl4−

Solution. Answer (from key): (b) [Fe(H2O)5NO]SO4. Complex ion is +2 (sulphate −2); H2O neutral, NO is NO+ (+1): x + 0 + 1 = +2, so Fe = +1.

Teacher's Note: Nitrosyl here is NO+.

Exam Note: Fe(CO)5 is zero; FeCl4− is +3.

Question 120. When SO2 is passed into an acidified potassium dichromate solution, the oxidation numbers of sulphur and chromium in the final products respectively are:

(a) +6, +6   (b) +6, +3   (c) 0, +3   (d) +2, +3

Solution. Answer (from key): (b) +6, +3. Cr2O72− + 3SO2 + 2H+ → 2Cr3+ + 3SO42− + H2O. S is +6 in sulphate; Cr is +3.

Teacher's Note: SO2 reduces dichromate to Cr3+.

Exam Note: Final products: sulphate and Cr3+.

Question 121. The oxidation number of nitrogen atoms in NH4NO3 are:

(a) +3, +3   (b) +3, −3   (c) −3, +5   (d) −5, +3

Solution. Answer (from key): (c) −3, +5. NH4+: N = −3; NO3−: N = +5.

Teacher's Note: Treat as two ions, not one molecule.

Exam Note: Average +1 hides two different states.

Question 122. The oxidation states of S-atoms in Caro's and Marshall's acids are:

(a) +6, +6   (b) +6, +4   (c) +6, −6   (d) +4, +6

Solution. Answer (from key): (a) +6, +6. Caro's acid H2SO5 and Marshall's acid H2S2O8 both contain peroxy linkage; S is +6 in each (peroxy O is −1).

Teacher's Note: Peroxy oxygens are −1, so S stays +6.

Exam Note: Highest oxidation state of S is +6.

Question 123. In which of the following the oxidation number of oxygen has been arranged in increasing order:

(a) OF2 < KO2 < BaO2 < O3   (b) BaO2 < KO2 < O3 < OF2   (c) BaO2 < O3 < OF2 < KO2   (d) KO2 < OF2 < O3 < BaO2

Solution. Answer (from key): (b) BaO2 < KO2 < O3 < OF2. BaO2 = −1; KO2 = −1/2; O3 = 0; OF2 = +2. Increasing: BaO2 < KO2 < O3 < OF2.

Teacher's Note: Peroxide −1, superoxide −1/2, element 0, OF2 +2.

Exam Note: Superoxide is fractional.

Question 124. The oxidation number of oxygen in KO3, Na2O2 is:

(a) 3, 2   (b) 1, 0   (c) 0, 1   (d) −0.33, −1

Solution. Answer (from key): (d) −0.33, −1. KO3 (ozonide): 3x = −1, x = −0.33. Na2O2 (peroxide): −1.

Teacher's Note: Ozonide −1/3; peroxide −1.

Exam Note: Average value is for O in O3−.

Question 125. The oxidation number of phosphorus in Ba(H2PO2)2 is:

(a) −1   (b) +1   (c) +2   (d) +3

Solution. Answer (from key): (b) +1. Ba = +2; each H2PO2−: 2 + x − 4 = −1, so P = +1.

Teacher's Note: Hypophosphite ion carries −1.

Exam Note: Balance charge on the anion.

Question 126. If it is known that in Fe0.96O, Fe is present in +2 and +3 oxidation state. What is the mole fraction of Fe2+ in the compound?

(a) 12/25   (b) 25/12   (c) 1/12   (d) 11/12

Solution. Answer (from key): (d) 11/12. Let Fe2+ = x, Fe3+ = y: x + y = 0.96 and 2x + 3y = 2. So y = 0.08, x = 0.88. Fraction = 0.88/0.96 = 11/12.

Teacher's Note: Charge balance gives one equation, atom count the other.

Exam Note: Total positive charge must equal 2.

Question 127. Which ordering of compounds is according to the decreasing order of the oxidation state of nitrogen?

(a) HNO3, NO, NH4Cl, N2   (b) HNO3, NO, N2, NH4Cl   (c) HNO3, NH4Cl, NO, N2   (d) NO, HNO3, NH4Cl, N2

Solution. Answer (from key): (b) HNO3, NO, N2, NH4Cl. HNO3 +5; NO +2; N2 0; NH4Cl −3. Decreasing order: HNO3, NO, N2, NH4Cl.

Teacher's Note: Assign each N state, then sort.

Exam Note: N in NH4Cl is −3.

Question 128. 2 mole of N2H4 loses 16 mole of electron is being converted to a new compound X. Assuming that all of the N appears in the new compound. What is the oxidation state of 'N' in X?

(a) −1   (b) −2   (c) +2   (d) +4

Solution. Answer (from key): (c) +2. 2 mol N2H4 = 4 mol N losing 16 mol e−, so 4 e− per N. N in N2H4 is −2, so new state is +2.

Teacher's Note: Electrons lost per N atom added to −2.

Exam Note: Count N atoms, not molecules.

Question 129. When K2Cr2O7 is converted to K2CrO4, the change in the oxidation state of chromium is:

(a) 0   (b) 6   (c) 4   (d) 3

Solution. Answer (from key): (a) 0. Cr is +6 in both Cr2O72− and CrO42−; the change is zero (not a redox reaction).

Teacher's Note: Dichromate and chromate interconvert by pH only.

Exam Note: Not every change of species is redox.

Question 130. When a manganous salt is fused with a mixture of KNO3 and solid NaOH, the oxidation number of Mn changes from +2 to:

(a) +4   (b) +3   (c) +6   (d) +7

Solution. Answer (from key): (c) +6. Fusion gives manganate, MnO42−, where Mn is +6.

Teacher's Note: Alkaline oxidative fusion gives manganate.

Exam Note: Permanganate (+7) needs further oxidation.

Question 131. In Fe(II)−MnO4− titration, HNO3 is not used because:

(a) it oxidises Mn2+   (b) it reduces MnO4−   (c) it oxidises Fe2+   (d) it reduces Fe3+ formed

Solution. Answer (from key): (c) it oxidises Fe2+. HNO3 is itself an oxidising agent and oxidises Fe2+, so KMnO4 consumed would be less than the true value.

Teacher's Note: Titrant must react only with the analyte.

Exam Note: HNO3 competes with permanganate.

Question 132. Which species are oxidized and reduced in the reaction: FeC2O4 + KMnO4 → Fe3+ + CO2 + Mn2+

(a) Oxidised: Fe, C; Reduced: Mn   (b) Oxidised: Fe; Reduced: Mn   (c) Reduced: Fe, Mn; Oxidised: C   (d) Reduced: C; Oxidised: Mn, Fe

Solution. Answer (from key): (a) Oxidised: Fe, C; Reduced: Mn. Fe: +2 → +3 (oxidised); C: +3 → +4 (oxidised); Mn: +7 → +2 (reduced).

Teacher's Note: Both Fe and oxalate carbon rise in oxidation state.

Exam Note: Oxalate carbon is +3.

Question 133. In which of the following reactions, H2O2 is acting as a reducing agent?

(a) SO2 + H2O2 → H2SO4   (b) 2KI + H2O2 → 2KOH + I2   (c) PbS + 4H2O2 → PbSO4 + 4H2O   (d) Ag2O + H2O2 → 2Ag + H2O + O2

Solution. Answer (from key): (d) Ag2O + H2O2 → 2Ag + H2O + O2. In (d) H2O2 is oxidised to O2 (−1 → 0) while Ag+ is reduced; so H2O2 is the reducing agent. In (a)−(c) it is reduced to water.

Teacher's Note: Reducing agent forms O2.

Exam Note: Oxygen rising from −1 to 0 means oxidation.

Question 134. Following reaction describes the rusting of iron: 4Fe + 3O2 → 4Fe3+ + 6O2−. Which one of the following statement is incorrect?

(a) This is an example of a redox reaction   (b) Metallic iron is reduced to Fe3+   (c) Fe3+ is an oxidising agent   (d) Metallic iron is a reducing agent

Solution. Answer (from key): (b) Metallic iron is reduced to Fe3+. Iron goes from 0 to +3, so it is oxidised, not reduced. Statement (b) is incorrect.

Teacher's Note: Loss of electrons is oxidation.

Exam Note: Iron is the reducing agent.

Question 135. Which reaction does not represent auto redox or disproportionation?

(a) Cl2 + OH− → Cl− + ClO3− + H2O   (b) 2H2O2 → H2O + O2   (c) 2Cu+ → Cu2+ + Cu   (d) (NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O

Solution. Answer (from key): (d) (NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O. In (d) N (−3) is oxidised and Cr (+6) is reduced, but they are different elements, so it is intramolecular redox, not disproportionation. (a)−(c) involve one element in two directions.

Teacher's Note: Disproportionation: same element oxidised and reduced.

Exam Note: Different elements change in (d).

Question 136. Which of the following is redox reaction?

(a) H2SO4 with NaOH   (b) In atmosphere, O3 from O2 by lightning   (c) Evaporation of H2O   (d) Oxides of nitrogen form nitrogen & oxygen by lightning

Solution. Answer (from key): (d) Oxides of nitrogen form nitrogen & oxygen by lightning. Formation or decomposition of nitrogen oxides changes oxidation states of N and O, so it is redox (key (d)). Neutralisation, O3 from O2 and evaporation involve no oxidation-number change between different elements.

Teacher's Note: Look for oxidation number changes.

Exam Note: Allotrope change and phase change are not redox.

Question 137. Which of the following is a redox-reaction?

(a) 2Na[Ag(CN)2] + Zn → Na2[Zn(CN)4] + 2Ag   (b) BaO2 + H2SO4 → BaSO4 + H2O2   (c) N2O5 + H2O → 2HNO3   (d) AgNO3 + KI → AgI + KNO3

Solution. Answer (from key): (a) 2Na[Ag(CN)2] + Zn → Na2[Zn(CN)4] + 2Ag. Zn (0) → Zn(+2) and Ag(+1) → Ag(0): displacement, a redox reaction. The others are acid-base/precipitation.

Teacher's Note: Metal displacement means electron transfer.

Exam Note: Check oxidation numbers on both sides.

Question 138. For the redox reaction, MnO4− + C2O42− + H+ → Mn2+ + CO2 + H2O the correct coefficients of the reactants for the balanced reaction are respectively MnO4−, C2O42−, H+:

(a) 2, 5, 16   (b) 16, 3, 12   (c) 15, 16, 12   (d) 2, 16, 5

Solution. Answer (from key): (a) 2, 5, 16. Mn: 5 e− gained; oxalate: 2 e− lost per ion. Balanced: 2MnO4− + 5C2O42− + 16H+ → 2Mn2+ + 10CO2 + 8H2O.

Teacher's Note: Equalise electrons: 2 × 5 = 5 × 2.

Exam Note: Check charge: 2(−1) + 5(−2) + 16 = +4.

Question 139. In a chemical reaction, K2Cr2O7 + xH2SO4 + ySO2 → K2SO4 + Cr2(SO4)3 + zH2O; the value of x, y and z respectively are:

(a) x = 1, y = 3, z = 1   (b) x = 4, y = 1, z = 4   (c) x = 3, y = 2, z = 1   (d) x = 2, y = 2, z = 1

Solution. Answer (from key): (a) x = 1, y = 3, z = 1. Cr gains 6 e−; each SO2 loses 2, so y = 3. Sulphate on right = 1 + 3 = 4 = x + y, so x = 1. Hydrogen: 2x = 2z gives z = 1.

Teacher's Note: Electron balance fixes y; sulphur balance fixes x.

Exam Note: Verify H and O balance.

Question 140. Balance the following equation and choose the quantity which is the sum of the coefficients of the products: ....CS2 + ....Cl2 → ....CCl4 + ....S2Cl2

(a) 5   (b) 3   (c) 6   (d) 2

Solution. Answer (from key): (d) 2. Balanced: CS2 + 3Cl2 → CCl4 + S2Cl2. Coefficients of products = 1 + 1 = 2.

Teacher's Note: Balance Cl: 3 × 2 = 4 + 2.

Exam Note: Sum products only, not reactants.

Question 141. Balance the following equation and choose the quantity which is the sum of the coefficients of reactants and products: ....PtCl4 + ....XeF2 → ....PtF6 + ....ClF + ....Xe

(a) 16   (b) 13   (c) 18   (d) 12

Solution. Answer (from key): (a) 16. Balanced: PtCl4 + 5XeF2 → PtF6 + 4ClF + 5Xe. Sum = 1 + 5 + 1 + 4 + 5 = 16.

Teacher's Note: Balance Cl first (4 ClF), then F: 6 + 4 = 10.

Exam Note: Sum all coefficients both sides.

Question 142. 0.1 mole H3POx is completely neutralised by 5.6 g KOH then the true statement is:

(a) x = 3 and given acid is dibasic   (b) x = 4 and given acid has no P−H linkage   (c) x = 2 and given acid does not form acid salt   (d) all of these

Solution. Answer (from key): (c) x = 2 and given acid does not form acid salt. KOH = 5.6/56 = 0.1 mol = moles of acid, so acid is monobasic: H3PO2 (x = 2), which has two P−H bonds and forms no acid salt.

Teacher's Note: Equal moles of acid and KOH means monobasic.

Exam Note: Only one OH group in hypophosphorous acid.

Question 143. When potassium permanganate is titrated against ferrous ammonium sulphate in acidic medium, the equivalent weight of potassium permanganate is:

(a) molecular weight/3   (b) molecular weight/5   (c) molecular weight/2   (d) molecular weight/10

Solution. Answer (from key): (b) molecular weight/5. In acidic medium MnO4− + 8H+ + 5e− → Mn2+ + 4H2O, so n-factor = 5 and E = M/5.

Teacher's Note: Acidic medium: Mn from +7 to +2.

Exam Note: Basic medium would give M/1.

Question 144. Equivalent weight of FeS2 in the half reaction, FeS2 → Fe2O3 + SO2 is:

(a) M/10   (b) M/11   (c) M/6   (d) M/1

Solution. Answer (from key): (b) M/11. Per FeS2: Fe +2 → +3 (1 e−); each S −1 → +4 (5 e−) ×2 = 10. Total n-factor = 11, E = M/11.

Teacher's Note: Add electrons from Fe and both S atoms.

Exam Note: S in FeS2 is −1.

Question 145. The equivalent weight of HCl in the given reaction is: K2Cr2O7 + 14HCl → 2KCl + 2CrCl3 + 3Cl2 + H2O

(a) 16.25   (b) 36.5   (c) 73   (d) 85.1

Solution. Answer (from key): (d) 85.1. 14 mol HCl take part in the reaction, and 6 mol are oxidised, losing 6 mol e−. So 1 mol HCl loses 6/14 mol e−; E = 36.5 × 14/6 = 85.1.

Teacher's Note: Count all HCl consumed, electrons only from oxidised part.

Exam Note: n-factor = 6/14 per mole HCl.

Question 146. Equivalent weight of H3PO2 when it disproportionate into PH3 and H3PO3 is:

(a) M   (b) M/2   (c) M/4   (d) 3M/4

Solution. Answer (from key): (d) 3M/4. 3H3PO2 → PH3 + 2H3PO3. P(+1 → −3) gains 4 e−; 2 P(+1 → +3) lose 4 e−. For 3 mol, 4 e− transferred, so n-factor = 4/3 and E = 3M/4.

Teacher's Note: Balance the disproportionation first; n-factor = 4/3.

Exam Note: n-factor is per mole of reactant.

Question 147. In the following reaction, As2S3 + H+ + NO3− → NO + H2O + AsO43− + SO42−, the equivalent weight of As2S3 is related to its molecular weight by:

(a) M/2   (b) M/4   (c) M/24   (d) M/28

Solution. Answer (from key): (d) M/28. As2S3: 2 As (+3 → +5) lose 4 e−; 3 S (−2 → +6) lose 24 e−. n-factor = 28, so E = M/28.

Teacher's Note: Add electron loss from both As and S.

Exam Note: As changes +3 to +5.

Question 148. Sulphur forms the chlorides S2Cl2 and SCl2. The equivalent mass of sulphur in SCl2 is:

(a) 8 g/mol   (b) 16 g/mol   (c) 64.8 g/mol   (d) 32 g/mol

Solution. Answer (from key): (b) 16 g/mol. In SCl2 sulphur has valency 2 (oxidation state +2), so E = 32/2 = 16 g/mol.

Teacher's Note: Equivalent mass = atomic mass / valency.

Exam Note: S in S2Cl2 would give 32.

Question 149. The equivalent weight of an element is 4. Its chloride has a vapour density 59.25. Then, the valency of the elements is:

(a) 4   (b) 3   (c) 2   (d) 1

Solution. Answer (from key): (b) 3. Molar mass of chloride = 2 × 59.25 = 118.5. For MCln: M = 4n, so 4n + 35.5n = 118.5 gives n = 3.

Teacher's Note: Atomic mass = E × valency.

Exam Note: Molar mass = 2 × VD.

Question 150. 6×10−3 mole K2Cr2O7 reacts completely with 9×10−3 mole Xn+ to give XO3− and Cr3+. The value of n is:

(a) 1   (b) 2   (c) 3   (d) None of these

Solution. Answer (from key): (a) 1. Electrons gained = 6×10−3 × 6 = 0.036. X goes from +n to +5: 9×10−3 × (5 − n) = 0.036, so n = 1.

Teacher's Note: Equate electrons gained and lost.

Exam Note: X in XO3− is +5.

Question 151. What weight of H2C2O4·2H2O (mol. wt. = 126) should be dissolved in water to prepare 250 mL of centinormal solution which act as a reducing agent?

(a) 0.63 g   (b) 0.1575 g   (c) 0.126 g   (d) 0.875 g

Solution. Answer (from key): (b) 0.1575 g. Centinormal = N/100. Equivalents = 0.01 × 0.250 = 0.0025. As reducing agent n-factor = 2, E = 63. Mass = 0.0025 × 63 = 0.1575 g.

Teacher's Note: Equivalent weight = 126/2 = 63.

Exam Note: Centinormal means 0.01 N.

Question 152. The equivalent wt. of the salt, KHC2O4·H2C2O4·4H2O when it act as reducing agent is:

(a) Mol. wt/1   (b) Mol. wt/2   (c) Mol. wt/3   (d) Mol. wt/4

Solution. Answer (from key): (d) Mol. wt/4. The salt contains two C2O4 units, each losing 2 e−, so n-factor = 4 and E = M/4.

Teacher's Note: Two oxalate units, each n-factor 2.

Exam Note: As acid, n-factor would be 3.

Question 153. The equivalent weight of divalent metal is W. The molecular weight of its chloride is:

(a) W + 35.5   (b) W + 71   (c) 2W + 71   (d) 2W + 35.5

Solution. Answer (from key): (c) 2W + 71. Atomic mass = 2W. Chloride MCl2 = 2W + 71.

Teacher's Note: Divalent metal has two Cl in chloride.

Exam Note: Atomic mass = E × valency.

Question 154. When BrO3− ion reacts with Br− in acid medium, Br2 is liberated. The equivalent weight of Br2 in this reaction is:

(a) 5M/8   (b) 5M/3   (c) 3M/5   (d) 4M/6

Solution. Answer (from key): (c) 3M/5. BrO3− + 5Br− + 6H+ → 3Br2 + 3H2O: 5 e− for 3 Br2, so n-factor = 5/3 and E = 3M/5.

Teacher's Note: Br2 formed by comproportionation: n = 5/3.

Exam Note: Balance reaction before finding n-factor.

Question 155. If mA gram of a metal A displaces mB gram of another metal B from its salt solution and if the equivalent weights are EA and EB respectively then equivalent weight of A can be expressed as:

(a) EA = (mA/mB) × EB   (b) EA = (mA × mB)/EB   (c) EA = (mB/mA) × EB   (d) EA = √(mA/mB) × EB

Solution. Answer (from key): (a) EA = (mA/mB) × EB. Equivalents of A = equivalents of B: mA/EA = mB/EB, so EA = (mA/mB) EB.

Teacher's Note: Displacement: equal equivalents react.

Exam Note: Law of equivalents.

Question 156. Hydrazine reacts with KIO3 in presence of HCl as N2H4 + IO3− + 2H+ + Cl− → ICl + N2 + 3H2O. The equivalent masses of N2H4 and KIO3 respectively are:

(a) 8 and 53.5   (b) 16 and 53.5   (c) 8 and 35.6   (d) 8 and 87

Solution. Answer (from key): (a) 8 and 53.5. N2H4 → N2: N −2 → 0, total 4 e−; E = 32/4 = 8. IO3−: I +5 → +1, 4 e−; KIO3 E = 214/4 = 53.5.

Teacher's Note: I goes from +5 to +1 (ICl).

Exam Note: KIO3 molar mass is 214.

Question 157. What will be the normality of a solution obtained by mixing 0.45 N and 0.60 N NaOH in the ratio 2 : 1 by volume?

(a) 0.4 N   (b) 0.5 N   (c) 1.05 N   (d) 0.15 N

Solution. Answer (from key): (b) 0.5 N. N = (2 × 0.45 + 1 × 0.60)/3 = 1.5/3 = 0.5 N.

Teacher's Note: Weighted average by volume.

Exam Note: Same solute so equivalents add.

Question 158. A solution containing 2.7×10−3 mol of A2+ ions required 1.6×10−3 mole for MnO4− for the oxidation of A2+ to AO3− the medium used is:

(a) neutral   (b) acidic   (c) strong basic   (d) none of these

Solution. Answer (from key): (b) acidic. A2+ → AO3− loses 3 e−: 8.1×10−3 equivalents. MnO4− n-factor = 8.1/1.6 ≈ 5, which is acidic medium.

Teacher's Note: n-factor 5 identifies acidic medium.

Exam Note: Basic gives 1; neutral gives 3.

Question 159. H2O2 is used as bleaching reagent because on dissociation it gives oxygen (H2O2 → H2O + ½O2). If "Chachi 420" used H2O2 solution to bleach her hair & she required 2.24 L O2 gas at 1 atm and 273 K. She has a H2O2 solution labelled as '5.6 V' then what volume of such solution must she require to bleach her hair?

(a) 200 mL   (b) 300 mL   (c) 400 mL   (d) 500 mL

Solution. Answer (from key): (c) 400 mL. 5.6 V means 1 L gives 5.6 L O2 at STP. Volume needed = 2.24/5.6 L = 0.4 L = 400 mL.

Teacher's Note: Volume strength: litres of O2 per litre of solution.

Exam Note: STP basis for volume strength.

Question 160. 1.25 g of a solid dibasic acid is completely neutralised by 25 mL of 0.25 molar Ba(OH)2 solution. Molecular mass of the acid is:

(a) 100   (b) 150   (c) 120   (d) 200

Solution. Answer: (d) 200. Ba(OH)2 = 25 × 0.25 = 6.25 mmol = 12.5 meq. Equivalents of acid = 12.5 meq, so E = 1.25/0.0125 = 100 and M = 100 × 2 = 200. Corrected: key prints (b) 150; working gives 200, option (d).

Teacher's Note: Equivalent weight times basicity gives molar mass.

Exam Note: Ba(OH)2 molarity to normality needs factor 2.

Question 161. 10 mL of N-HCl, 20 mL of N/2 H2SO4 and 30 mL of N/3 HNO3 are mixed together and volume made to one litre. The normality of H+ in the resulting solution is:

(a) 3N/100   (b) N/10   (c) N/20   (d) N/40

Solution. Answer (from key): (a) 3N/100. Milliequivalents: 10 × 1 + 20 × 0.5 + 30 × (1/3) = 10 + 10 + 10 = 30 meq in 1000 mL = 0.03 N = 3N/100.

Teacher's Note: Add milliequivalents then divide by final volume.

Exam Note: Dilution to 1 L is the final volume.

Question 162. 0.45 g of an acid of mol. wt. 90 was neutralised by 20 mL of 0.54 N caustic potash (KOH). The basicity of acid is:

(a) 1   (b) 2   (c) 3   (d) 4

Solution. Answer (from key): (b) 2. Moles of acid = 0.45/90 = 0.005. KOH = 20 × 0.54 = 10.8 meq = 0.0108 eq. Basicity = 0.0108/0.005 = 2.16 ≈ 2.

Teacher's Note: Basicity = equivalents of base / moles of acid.

Exam Note: Round to nearest integer: 2.

Question 163. A 3.4 g sample of H2O2 solution containing x% H2O2 by mass requires x mL of a KMnO4 solution for complete oxidation under acidic condition. The molarity of KMnO4 solution is:

(a) 1   (b) 0.5   (c) 0.4   (d) 0.2

Solution. Answer (from key): (c) 0.4. E of H2O2 = 17. Equivalents = (3.4 × x/100)/17 = 0.002x. KMnO4 equivalents = N × x/1000. So N = 2 and M = 2/5 = 0.4.

Teacher's Note: Equate equivalents; x cancels.

Exam Note: Molarity = normality / 5.

Question 164. What volume of O2(g) measured at 1 atm and 273 K will be formed by action of 100 mL of 0.5 N KMnO4 on hydrogen peroxide in an acid solution? The skeleton equation for the reaction is KMnO4 + H2SO4 + H2O2 → K2SO4 + MnSO4 + O2 + H2O

(a) 0.12 litre   (b) 0.028 litre   (c) 0.56 litre   (d) 1.12 litre

Solution. Answer (from key): (c) 0.56 litre. KMnO4 = 100 × 0.5 = 50 meq. H2O2 → O2 gives 2 e− per O2, so O2 = 25 mmol = 25 × 22.4 mL = 0.56 L.

Teacher's Note: Equivalents of O2 equal 50 meq with n-factor 2.

Exam Note: Convert mmol to litres at STP.

Question 165. A sample of 1.0 g of solid Fe2O3 of 80% purity is dissolved in a moderately concentrated HCl solution which is reduced by zinc dust. The resulting solution required 16.7 mL of a 0.1 M solution of the oxidant. Calculate the number of electrons taken up by the oxidant.

(a) 2   (b) 4   (c) 6   (d) 5

Solution. Answer (from key): (c) 6. Fe2O3 = 0.8/160 = 0.005 mol, so Fe2+ = 0.01 mol. Oxidant = 16.7 × 0.1 = 1.67 mmol. Electrons per oxidant = 10 mmol/1.67 mmol = 6.

Teacher's Note: Fe2+ moles equal electrons transferred.

Exam Note: Purity 80% reduces Fe2O3 to 0.8 g.

Question 166. KMnO4 reacts with oxalic acid according to the equation 2MnO4− + 5C2O42− + 16H+ → 2Mn2+ + 10CO2 + 8H2O. Here, 20 mL of 0.1 M KMnO4 is equivalent to:

(a) 120 mL of 0.25 M H2C2O4   (b) 150 mL of 0.10 M H2C2O4   (c) 25 mL of 0.20 M H2C2O4   (d) 50 mL of 0.20 M H2C2O4

Solution. Answer (from key): (c) 25 mL of 0.20 M H2C2O4. KMnO4 = 20 × 0.1 = 2 mmol, needing 2 × 5/2 = 5 mmol oxalic acid. (c) 25 × 0.20 = 5 mmol; others give 30, 15 and 10 mmol.

Teacher's Note: Mole ratio MnO4− : oxalate = 2 : 5.

Exam Note: Compare millimoles for each option.

Question 167. Ratio of moles of Fe (II) oxidised by equal volumes of equimolar KMnO4 and K2Cr2O7 solutions in acidic medium will be:

(a) 5 : 3   (b) 1 : 1   (c) 1 : 2   (d) 5 : 6

Solution. Answer (from key): (d) 5 : 6. Per mole, KMnO4 takes 5 e− and K2Cr2O7 takes 6 e−, so Fe2+ oxidised in ratio 5 : 6.

Teacher's Note: Equal moles; moles of Fe(II) ∝ n-factor.

Exam Note: Dichromate n-factor is 6.

Question 168. The weight of a mixture containing HCl and H2SO4 is 0.1 g. On treatment with an excess of AgNO3 solution, reacted with this acid mixture gives 0.1435 g of AgCl. Weight % of the H2SO4 is mixture is:

(a) 36.5   (b) 63.5   (c) 50   (d) None of these

Solution. Answer (from key): (b) 63.5. AgCl = 0.1435/143.5 = 10−3 mol = HCl, so HCl = 0.0365 g. H2SO4 = 0.1 − 0.0365 = 0.0635 g = 63.5%.

Teacher's Note: Only HCl precipitates silver chloride.

Exam Note: Subtract HCl mass from total.

Question 169. A solution of Na2S2O3 is standardized iodometrically against 0.167 g of KBrO3. This process requires 50 mL of the Na2S2O3 solution. What is the normality of the Na2S2O3?

(a) 0.2 N   (b) 0.12 N   (c) 0.72 N   (d) 0.02 N

Solution. Answer (from key): (b) 0.12 N. KBrO3 (BrO3− → Br−, 6 e−): E = 167/6; equivalents = 0.167 × 6/167 = 0.006. N = 0.006/0.050 L = 0.12 N.

Teacher's Note: Equivalents of hypo equal equivalents of bromate.

Exam Note: Bromate n-factor is 6.

Question 170. 0.80 g of impure (NH4)2SO4 was boiled with 100 mL of a 0.2 N NaOH solution till all the NH3(g) evolved. The remaining solution was diluted to 250 mL. 25 mL of this solution was neutralized using 5 mL of a 0.2 N H2SO4 solution. The percentage purity of the (NH4)2SO4 sample is:

(a) 82.5   (b) 72.5   (c) 62.5   (d) 17.5

Solution. Answer (from key): (a) 82.5. NaOH taken = 20 meq. Excess in 250 mL = (5 × 0.2/25) × 250 = 10 meq. NaOH used = 10 meq = 5 mmol (NH4)2SO4 = 0.66 g. Purity = 0.66/0.80 = 82.5%.

Teacher's Note: Back titration: total minus excess gives reacted base.

Exam Note: Each (NH4)2SO4 needs 2 NaOH.

Question 171. The NH3 evolved due to complete conversion of N from 1.12 g sample of protein was absorbed in 45 mL of 0.4 N HNO3. The excess acid required 20 mL of 0.1 N NaOH. The % N in the sample is:

(a) 8   (b) 16   (c) 20   (d) 25

Solution. Answer (from key): (c) 20. Acid used by NH3 = 45 × 0.4 − 20 × 0.1 = 16 meq = 16 mmol N = 0.224 g. % N = 0.224/1.12 × 100 = 20%.

Teacher's Note: Kjeldahl: millimoles of NH3 equal millimoles of N.

Exam Note: N molar mass 14 g/mol.

Question 172. Find out % of oxalate ion in a given sample of an alkali metal oxalate salt, 0.30 g of it is dissolved in 100 mL water required 90 mL of centimolar KMnO4 solution in acidic medium.

(a) 66%   (b) 55%   (c) 44%   (d) 6.6%

Solution. Answer (from key): (a) 66%. Centimolar KMnO4 = 0.01 M, N = 0.05. Equivalents = 90 × 0.05 = 4.5 meq. Oxalate E = 88/2 = 44, mass = 4.5 × 44 = 198 mg. % = 0.198/0.30 = 66%.

Teacher's Note: Centimolar is 0.01 M, which is 0.05 N for permanganate.

Exam Note: Oxalate ion E = 44.

Question 173. 320 mg of a sample of magnesium having a coating of its oxide required 20 mL of 0.1 M hydrochloric acid for the complete neutralisation of the latter. The composition of the sample is:

(a) 87.5% Mg and 12.5% MgO   (b) 12.5% Mg and 87.5% MgO   (c) 80% Mg and 20% MgO   (d) 20% Mg and 80% MgO

Solution. Answer (from key): (a) 87.5% Mg and 12.5% MgO. MgO + 2HCl: HCl = 2 mmol, so MgO = 1 mmol = 40 mg. MgO = 40/320 = 12.5%, Mg = 87.5%.

Teacher's Note: Acid is consumed only to neutralise the oxide coating.

Exam Note: Convert millimoles of MgO to mg.

Question 174. The concentration of bivalent lead ions in a sample of polluted water that also contains nitrate ions is determined by adding solid sodium sulphate (M = 142) to exactly 500 mL water. Calculate the molarity of lead ions if 0.355 g of sodium sulphate was needed for complete precipitation of lead ions as sulphate.

(a) 1.25×10−3 M   (b) 2.5×10−3 M   (c) 5×10−3 M   (d) None of these

Solution. Answer (from key): (c) 5×10−3 M. Na2SO4 = 0.355/142 = 0.0025 mol = moles of Pb2+ (1 : 1). Molarity = 0.0025/0.500 = 5×10−3 M.

Teacher's Note: Pb2+ + SO42− reacts 1 : 1.

Exam Note: Volume is 500 mL, not 1 L.

Question 175. What volume of HNO3 (sp. gravity 1.05 g mL−1 containing 12.6 (w/w) of HNO3) that reduce into NO is required to oxidise iron 1 g FeSO4·7H2O in acid medium is:

(a) 70 mL   (b) 0.57 mL   (c) 80 mL   (d) 0.65 mL

Solution. Answer (from key): (b) 0.57 mL. Fe2+ = 1/278 mol. NO3− → NO takes 3 e−, so HNO3 = 1/(278 × 3) mol = 1.2×10−3 mol = 0.0755 g. Solution = 0.0755/0.126 = 0.5995 g, volume = 0.5995/1.05 = 0.57 mL.

Teacher's Note: n-factor of HNO3 to NO is 3.

Exam Note: FeSO4·7H2O molar mass 278.

Question 176. The total volume of 0.1 M KMnO4 solution that are needed to oxidize 100 mg each of ferrous oxalate and ferrous sulphate in a mixture in acidic medium is:

(a) 1.096 mL   (b) 1.32 mL   (c) 5.48 mL   (d) none of these

Solution. Answer (from key): (c) 5.48 mL. FeC2O4 (M = 144): n-factor 3 (Fe 1 + C2O4 2); FeSO4 (M = 152): n-factor 1. 0.5 N × V = 100 × 3/144 + 100 × 1/152 = 2.083 + 0.658 meq, so V = 5.48 mL.

Teacher's Note: Ferrous oxalate gives 3 electrons per formula unit.

Exam Note: 0.1 M KMnO4 is 0.5 N.

Question 177. When 2.5 g of a sample of Mohr's salt reacts completely with 50 mL of N/10 KMnO4 solution. The % purity of the sample of Mohr's salt is:

(a) 78.4   (b) 70   (c) 37   (d) 40

Solution. Answer (from key): (a) 78.4. KMnO4 = 50 × 0.1 = 5 meq = Mohr's salt (n = 1). Mass = 5 × 392/1000 = 1.96 g. Purity = 1.96/2.5 = 78.4%.

Teacher's Note: Mohr's salt equivalent weight = molar mass = 392.

Exam Note: Equivalents of salt equal equivalents of KMnO4.

Question 178. 4 mole of a mixture of Mohr's salt and Fe2(SO4)3 requires 500 mL of 1 M K2Cr2O7 for complete oxidation in acidic medium. The mole % of the Mohr's salt in the mixture is:

(a) 25   (b) 50   (c) 60   (d) 75

Solution. Answer (from key): (d) 75. K2Cr2O7 = 0.5 mol × 6 = 3 equivalents. Only Fe2+ (Mohr's salt, 1 e−) is oxidised, so Mohr's salt = 3 mol. Mole % = 3/4 × 100 = 75.

Teacher's Note: Fe2(SO4)3 (Fe3+) does not react.

Exam Note: Dichromate n-factor is 6.

Question 179. The equivalent weight of a metal is double than of oxygen. How many times is the equivalent weight of it's oxide than the equivalent weight of the metal?

(a) 1.5   (b) 2   (c) 3   (d) 4

Solution. Answer (from key): (a) 1.5. E of metal = 2 × 8 = 16. Oxide E = 16 + 8 = 24. Ratio = 24/16 = 1.5.

Teacher's Note: Oxide equivalent = metal E + 8.

Exam Note: Oxygen equivalent weight is 8.

Question 180. A metal oxide has the formula X2O3. It can be reduced by hydrogen to give free metal and water. 0.1596 g of metal oxide requires 6 mg of hydrogen for complete reduction. The atomic weight of the metal (in amu) is:

(a) 15.58   (b) 155.8   (c) 5.58   (d) 55.8

Solution. Answer (from key): (d) 55.8. 1 g H2 would reduce 0.1596/0.006 = 26.6 g oxide, so E(oxide) = 26.6. E(metal) = 26.6 − 8 = 18.6. Atomic weight = 3 × 18.6 = 55.8.

Teacher's Note: Equivalents of oxide equal equivalents of H2.

Exam Note: Valency of X in X2O3 is 3.

Question 181. Calculate the mass of anhydrous oxalic acid, which can be oxidised to CO2(g) by 100 mL of MnO4− solution, 10 mL of which is capable of oxidising 50 mL of 1 N I− to I2.

(a) 45 g   (b) 22.5 g   (c) 30 g   (d) 12.25 g

Solution. Answer (from key): (b) 22.5 g. 10 mL of MnO4− = 50 meq, so N = 5. 100 mL = 500 meq. Oxalic acid E = 90/2 = 45; mass = 500 × 45/1000 = 22.5 g.

Teacher's Note: Find normality of permanganate first.

Exam Note: Anhydrous oxalic acid molar mass 90.

Question 182. A mixture of NaHC2O4 and KHC2O4·H2C2O4 required equal volumes of 0.2 N KMnO4 and 0.12 N NaOH separately. What is the molar ratio of NaHC2O4 and KHC2O4·H2C2O4 in the mixture?

(a) 6 : 1   (b) 1 : 6   (c) 1 : 3   (d) 3 : 1

Solution. Answer (from key): (d) 3 : 1. Let a mol NaHC2O4 (redox n = 2, acid n = 1) and b mol of the other salt (redox n = 4, acid n = 3). 0.2V = 2a + 4b; 0.12V = a + 3b. Eliminating V: a = 0.06V, b = 0.02V, so a : b = 3 : 1.

Teacher's Note: Two n-factors for each salt: redox and acid-base.

Exam Note: Equal volumes let V cancel.

Question 183. Stannous sulphate (SnSO4) and potassium permanganate are used as oxidising agents in acidic medium for oxidation of ferrous ammonium sulphate to ferric sulphate. The ratio of number of moles of stannous sulphate required per mole of ferrous ammonium sulphate to the number of moles of KMnO4 required per mole of ferrous ammonium sulphate, is:

(a) 2.5   (b) 0.2   (c) 0.4   (d) 2.0

Solution. Answer (from key): (a) 2.5. Per mole Fe2+ (1 e−): KMnO4 needs 1/5 = 0.2 mol (n = 5). Tin as oxidant (Sn4+ → Sn2+, n = 2) needs 1/2 = 0.5 mol. Ratio = 0.5/0.2 = 2.5. (Statement as printed calls SnSO4 an oxidant; key answer is 2.5.)

Teacher's Note: Moles of oxidant = 1/n-factor per mole of Fe2+.

Exam Note: Ratio of 1/2 to 1/5 is 2.5.

Question 184. If a g is the mass of NaHC2O4 required to neutralize 100 mL of 0.2 M NaOH and b g that required to reduce 100 mL of 0.02 M KMnO4 in acidic medium, then:

(a) a = b   (b) 2a = b   (c) a = 2b   (d) None of these

Solution. Answer (from key): (d) None of these. As acid (n = 1): equivalents = 100 × 0.2/1000 = 0.02, a = 0.02 × 112 = 2.24 g. As reductant (n = 2, E = 56): equivalents = 100 × 0.02 × 5/1000 = 0.01, b = 0.56 g. So a = 4b, none of these.

Teacher's Note: One salt, two n-factors: 1 as acid, 2 as reductant.

Exam Note: a : b = 4 : 1.

Question 185. 2 mole, equimolar mixture of Na2C2O4 and H2C2O4 required V1 L of 0.1 M KMnO4 in acidic medium for complete oxidation. The same amount of the mixture required V2 L of 0.2 M NaOH for neutralization. The ratio of V1 to V2 is:

(a) 1 : 2   (b) 2 : 1   (c) 4 : 5   (d) 5 : 4

Solution. Answer (from key): (c) 4 : 5. 1 mol each. Oxidation: (2 + 2) = 4 eq = V1 × 0.1 × 5, so V1 = 8 L. Neutralisation: only H2C2O4, 2 eq = 0.2 V2, so V2 = 10 L. Ratio 8 : 10 = 4 : 5.

Teacher's Note: Sodium oxalate has no acidic hydrogen.

Exam Note: 0.1 M KMnO4 is 0.5 N.

Question 186. A mixture containing 0.05 mole of K2Cr2O7 and 0.02 mole of KMnO4 was treated with excess of KI in acidic medium. The liberated iodine required 1.0 L of Na2S2O3 solution for titration. Concentration of Na2S2O3 solution was:

(a) 0.40 mol L−1   (b) 0.20 mol L−1   (c) 0.25 mol L−1   (d) 0.30 mol L−1

Solution. Answer (from key): (a) 0.40 mol L−1. Equivalents of I2 = 0.05 × 6 + 0.02 × 5 = 0.4. Thiosulphate equivalents = 0.4, n = 1, so concentration = 0.4 mol/L in 1.0 L.

Teacher's Note: Iodometry: oxidant equivalents equal hypo equivalents.

Exam Note: Hypo n-factor is 1.

Question 187. 25 mL of 2 N HCl, 50 mL of 4 N HNO3 and x mL of 2 M H2SO4 are mixed together and the total volume is made up to 1 L after dilution. 50 mL of this acid mixture completely reacted with 25 mL of a 1 N Na2CO3 solution. The value of x is:

(a) 250 mL   (b) 62.5 mL   (c) 100 mL   (d) None of these

Solution. Answer (from key): (b) 62.5 mL. 50 mL of mixture reacts with 25 meq of Na2CO3, so 1 L holds 500 meq of acid. 25 × 2 + 50 × 4 + x × 4 = 500, so x = 62.5 mL.

Teacher's Note: Scale 50 mL to 1 L: factor 20.

Exam Note: 2 M H2SO4 is 4 N.

Question 188. In an iodometric estimation, the following reactions occur 2Cu2+ + 4I− → Cu2I2 + I2; I2 + 2Na2S2O3 → 2NaI + Na2S4O6. 0.12 mole of CuSO4 was added to excess of KI solution and the liberated iodine required 120 mL of hypo. The molarity of hypo solution was:

(a) 2   (b) 0.20   (c) 0.1   (d) 1.0

Solution. Answer (from key): (d) 1.0. 2 mol Cu2+ liberate 1 mol I2 needing 2 mol hypo, so hypo = Cu2+ = 0.12 mol in 0.120 L: M = 1.0.

Teacher's Note: Mole of hypo equals mole of Cu2+.

Exam Note: Use litres: 120 mL = 0.12 L.

Question 189. 1 g mixture of equal number of mole of Li2CO3 and other metal carbonate (M2CO3) required 21.6 mL of 0.5 N HCl for complete neutralisation reaction. What is the approximate atomic weight of the other metal?

(a) 25   (b) 23   (c) 24   (d) 51

Solution. Answer: none of the options. Equivalents of HCl = 21.6 × 0.5 = 10.8 meq. Each carbonate gives 2 eq/mol, so with n mol of each: 4n = 0.0108, n = 0.0027. Mass: n(74 + 2M + 60) = 1 gives 2M + 60 = 296.4 and M ≈ 118. Corrected: working gives M ≈ 118 (no option matches); key prints (d) 51, whose solution used x = 0.407 g, an arithmetic slip.

Teacher's Note: Equal moles: mass of Li2CO3 = 74n.

Exam Note: Key value 51 does not follow from data.

Question 190. 32 g of a sample of FeSO4·7H2O were dissolved in dilute sulphuric acid and water and it's volume was made up to 1 litre. 25 mL of this solution required 20 mL of 0.02 M KMnO4 solution for complete oxidation. Calculate the weight % of FeSO4·7H2O in the sample.

(a) 34.75   (b) 69.5   (c) 89.5   (d) None of these

Solution. Answer (from key): (b) 69.5. KMnO4 = 20 × 0.02 × 5 = 2 meq in 25 mL, so 80 meq in 1 L. Mass = 80 × 278/1000 = 22.24 g. % = 22.24/32 = 69.5%.

Teacher's Note: Scale 25 mL to 1 L by factor 40.

Exam Note: Fe2+ n-factor is 1.

Question 191. In the mixture of (NaHCO3 + Na2CO3), volume of HCl required is x mL with phenolphthalein indicator and y mL with methyl orange indicator in the same titration. Hence, volume of HCl for complete reaction of Na2CO3 is:

(a) 2x   (b) y   (c) x/2   (d) (y − x)

Solution. Answer (from key): (a) 2x. Phenolphthalein end point converts Na2CO3 to NaHCO3 only (x mL); the same volume again is needed to convert it to H2CO3. Total for Na2CO3 = 2x.

Teacher's Note: Na2CO3 reacts in two equal stages.

Exam Note: NaHCO3 does not react with phenolphthalein.

Question 192. 0.1 g of a solution containing Na2CO3 and NaHCO3 requires 10 mL of 0.01 N HCl for neutralization using phenolphthalein as an indicator. Wt. % of Na2CO3 in solutions is:

(a) 25   (b) 32   (c) 50   (d) None of these

Solution. Answer (from key): (d) None of these. With phenolphthalein only Na2CO3 → NaHCO3: 10 × 0.01 = 0.1 meq = 0.1 mmol = 10.6 mg. % = 10.6/100 = 10.6%, not among the options.

Teacher's Note: Phenolphthalein sees only half of Na2CO3 neutralisation.

Exam Note: Answer 10.6% matches none of the options.

Question 193. A mixture of NaOH and Na2CO3 required 25 mL of 0.1 M HCl using phenolphthalein as the indicator. However, the same amount of the mixture required 30 mL of 0.1 M HCl when methyl orange was used as the indicator. The molar ratio of NaOH and Na2CO3 in the mixture was:

(a) 2 : 1   (b) 1 : 2   (c) 4 : 1   (d) 1 : 4

Solution. Answer (from key): (c) 4 : 1. Phenolphthalein: NaOH + Na2CO3 = 2.5 mmol. Methyl orange: NaOH + 2Na2CO3 = 3.0 mmol. So Na2CO3 = 0.5 mmol and NaOH = 2.0 mmol; ratio 4 : 1.

Teacher's Note: Difference of two end points gives Na2CO3.

Exam Note: Carbonate counts once at first end point.

Question 194. 100 mL solution of NaOH and Na2CO3 was first titrated with N/10 HCl in presence of HPh, 17.5 mL is required to end point. After this MeOH was added and 2.5 mL of same HCl is required. The amount of NaOH in mixture is:

(a) 0.06 g per 100 mL   (b) 0.06 g per 200 mL   (c) 0.05 g per 100 mL   (d) 0.012 g per 200 mL

Solution. Answer (from key): (a) 0.06 g per 100 mL. Second stage (2.5 mL) = Na2CO3 half-neutralisation, so Na2CO3 used 2.5 mL in first stage too. NaOH = 17.5 − 2.5 = 15 mL × 0.1 = 1.5 meq = 0.06 g per 100 mL.

Teacher's Note: Second end point volume equals carbonate part.

Exam Note: N/10 HCl: 1 mL = 0.1 meq.

Question 195. 1 gram of a sample of CaCO3 was strongly heated and the CO2 liberated was absorbed in 100 mL of 0.5 M NaOH solution. Assuming 90% purity for the sample. How many mL of 0.5 M HCl would be required to react with the resulting solution to reach the end point in presence of phenolphthalein?

(a) 73 mL   (b) 41 mL   (c) 82 mL   (d) 100 mL

Solution. Answer (from key): (c) 82 mL. CO2 = 0.9/100 = 9 mmol; NaOH = 50 mmol. Na2CO3 = 9 mmol, NaOH left = 32 mmol. To phenolphthalein end point: 32 + 9 = 41 mmol HCl, volume = 41/0.5 = 82 mL.

Teacher's Note: Phenolphthalein end point: all NaOH plus carbonate → bicarbonate.

Exam Note: CO2 uses 2 NaOH per mole.

Question 196. A sample of pure sodium carbonate 0.318 g is dissolved in water and titrated with HCl solution. A volume of 60 mL is required to reach the methyl orange end point. Calculate the molarity of the acid.

(a) 0.1 M   (b) 0.2 M   (c) 0.4 M   (d) None of these

Solution. Answer (from key): (a) 0.1 M. Na2CO3 = 0.318/106 = 3 mmol; methyl orange needs 2 HCl each: 6 mmol in 60 mL = 0.1 M.

Teacher's Note: Methyl orange end point: two HCl per carbonate.

Exam Note: Molar mass of Na2CO3 = 106.

Question 197. 10 L of hard water required 5.6 g of lime for removing hardness. Hence temporary hardness in ppm of CaCO3 is:

(a) 1000   (b) 2000   (c) 100   (d) 1

Solution. Answer (from key): (a) 1000. Lime CaO = 5.6/56 = 0.1 mol; Ca(HCO3)2 + Ca(OH)2 → 2CaCO3 + 2H2O, so 0.1 mol Ca(HCO3)2 equals 0.1 mol CaCO3 = 10 g in 10 L = 1000 mg/L = 1000 ppm.

Teacher's Note: One mole lime removes one mole of temporary hardness.

Exam Note: Report in CaCO3 equivalents.

Question 198. 1 L of pond water contains 20 mg of Ca2+ and 12 mg of Mg2+ ions. What is the volume of a 2 N Na2CO3 solution required to soften 5000 L of pond water?

(a) 500 L   (b) 50 L   (c) 5 L   (d) None of these

Solution. Answer (from key): (c) 5 L. Per litre: Ca2+ = 20/20 = 1 meq; Mg2+ = 12/12 = 1 meq; total 2 meq. For 5000 L: 10 000 meq = 10 eq. Volume of 2 N = 10/2 = 5 L.

Teacher's Note: Equivalents of hardness equal equivalents of carbonate.

Exam Note: Equivalent weights: Ca 20, Mg 12.

Question 199. One litre of a sample of hard water contain 4.44 mg CaCl2 and 1.9 mg of MgCl2. What is the total hardness in terms of ppm of CaCO3?

(a) 2 ppm   (b) 3 ppm   (c) 4 ppm   (d) 6 ppm

Solution. Answer (from key): (d) 6 ppm. CaCl2 (111) 4.44 mg = 0.04 mmol = 4 mg CaCO3; MgCl2 (95) 1.9 mg = 0.02 mmol = 2 mg CaCO3. Total 6 mg per L = 6 ppm.

Teacher's Note: Convert each salt to its CaCO3 equivalent (mole for mole).

Exam Note: 1 L of water is about 1 kg: mg/L = ppm.

Question 200. If hardness of water sample is 200 ppm, then select the incorrect statement:

(a) Mass ratio of CaCO3 to H2O is 0.02/100   (b) Mol ratio of CaCO3 to H2O is 3.6×10−5   (c) Mass of CaCO3 present in hard water is 0.2 g/L   (d) 1 miliequivalent of CaCO3 present in 1 kg of hard water

Solution. Answer (from key): (d) 1 miliequivalent of CaCO3 present in 1 kg of hard water. 200 ppm = 200 mg CaCO3 per kg: mass ratio 200/106 = 0.02/100 (true); mole ratio = (0.2 g/100 = 2×10−3 mol)/(1000 g/18 = 55.6 mol) = 3.6×10−5 (true); 0.2 g/L (true). 200 mg = 2 mmol = 4 meq per kg, so (d) is incorrect.

Teacher's Note: 200 ppm is 200 mg per kg: compare each claim.

Exam Note: CaCO3 has two equivalents per mole.

Level 2

Question L2.1. A mixture of NH4NO3 and (NH4)2HPO4 contain 30.40% mass per cent of nitrogen. What is the mass ratio of the two components in the mixture?

(a) 2 : 1   (b) 1 : 2   (c) 3 : 4   (d) 4 : 1

Solution. Answer (from key): (a) 2 : 1. Let x g NH4NO3 (N = 28/80) and y g (NH4)2HPO4 (N = 28/132). (x·28/80 + y·28/132)/(x + y) = 0.304 gives x : y = 2 : 1.

Teacher's Note: Weighted nitrogen percentages: 35% and 21.2%.

Exam Note: Alligation between 35% and 21.2% gives ratio.

Question L2.2. What volume of 75% alcohol by weight (d = 0.80 g/cm3) must be used to prepare 150 cm3 of 30% alcohol by weight (d = 0.90 g/cm3)?

(a) 67.5 mL   (b) 56.25 mL   (c) 44.44 mL   (d) None of these

Solution. Answer (from key): (a) 67.5 mL. Alcohol mass is the same: V × 0.80 × 0.75 = 150 × 0.90 × 0.30 = 40.5 g, so V = 67.5 mL.

Teacher's Note: Equate alcohol mass before and after dilution.

Exam Note: Use each solution's own density.

Question L2.3. Calculate the number of millilitres of NH3 (aq) solution (d = 0.986 g/mL) contain 2.5% by weight NH3, which will be required to precipitate iron as Fe(OH)3 in a 0.8 g sample that contains 50% Fe2O3?

(a) 0.344 mL   (b) 3.44 mL   (c) 17.24 mL   (d) 10.34 mL

Solution. Answer (from key): (d) 10.34 mL. Fe2O3 = 0.4/160 = 2.5×10−3 mol, so Fe3+ = 5×10−3 mol. Fe3+ + 3NH3 + 3H2O → Fe(OH)3 + 3NH4+: NH3 = 0.015 mol. M of solution = 0.986 × 1000 × 0.025/17 = 1.45 M. V = 0.015/1.45 = 10.34 mL.

Teacher's Note: Three NH3 per Fe3+; molarity from density.

Exam Note: Fe2O3 contains two Fe.

Question L2.4. In the preparation of iron from haematite (Fe2O3) by the reaction with carbon 2Fe2O3 + 3C → 4Fe + 3CO2. How much 80% pure iron could be produced from 120 kg of 90% pure Fe2O3?

(a) 94.5 kg   (b) 60.48 kg   (c) 116.66 kg   (d) 120 kg

Solution. Answer (from key): (a) 94.5 kg. Fe2O3 = 108 kg. 320 kg Fe2O3 gives 224 kg Fe, so Fe = 108 × 224/320 = 75.6 kg pure. Impure (80%) = 75.6/0.80 = 94.5 kg.

Teacher's Note: Pure iron divided by 0.80 gives impure mass.

Exam Note: Take 90% of haematite first.

Question L2.5. A mineral consists of an equimolar mixture of the carbonates of two bivalent metals. One metal is present to the extent of 12.5% by weight. 2.8 g of the mineral on heating lost 1.32 g of CO2. What is the % by weight of the other metal?

(a) 87.5   (b) 35.71   (c) 65.11   (d) 23.21

Solution. Answer (from key): (d) 23.21. CO2 = 1.32 g needs CO32− = 60/44 × 1.32 = 1.8 g. Metal A = 0.125 × 2.8 = 0.35 g. Total metals = 2.8 − 1.8 = 1.0 g, so metal B = 0.65 g. % = 0.65/2.8 × 100 = 23.21.

Teacher's Note: Carbonate mass found from CO2; subtract to get metals.

Exam Note: 12.5% refers to the whole mineral.

Question L2.6. 6.2 g of a sample containing Na2CO3, NaHCO3 and non-volatile inert impurity on gentle heating loses 5% of its weight due to reaction 2NaHCO3 → Na2CO3 + H2O + CO2. Residue is dissolved in water and formed 100 mL solution and its 10 mL portion requires 7.5 mL of 0.2 M aqueous solution of BaCl2 for complete precipitation of carbonates. Determine weight (in gram) of Na2CO3 in the original sample.

(a) 1.59   (b) 1.06   (c) 0.53   (d) None of these

Solution. Answer (from key): (b) 1.06. Loss = 0.31 g; 2 mol NaHCO3 (168 g) loses 62 g, so NaHCO3 = 0.01 mol, giving 0.005 mol Na2CO3. Carbonate in residue = (100/10) × 7.5 × 0.2 = 0.015 mol. Original Na2CO3 = 0.015 − 0.005 = 0.01 mol = 1.06 g.

Teacher's Note: Residual carbonate minus carbonate formed from heating.

Exam Note: Scale 10 mL portion to 100 mL.

Question L2.7. Nitric acid can be produced NH3 in three steps process (I) 4NH3(g) + 5O2(g) → 4NO(g) + 6H2O(g) (II) 2NO(g) + O2(g) → 2NO2(g) (III) 3NO2(g) + H2O(l) → 2HNO3(aq) + NO(g). Percent yield of Ist, IInd and IIIrd are respectively 50%, 60% and 80% then what volume of NH3(g) at 1 atm and 0°C required to produced 1575 g of HNO3.

(a) 156.25   (b) 350 L   (c) 3500 L   (d) None of these

Solution. Answer (from key): (c) 3500 L. HNO3 = 1575/63 = 25 mol. NO2 needed = 25 × 3/2/0.8 = 46.875 mol; NO needed = 46.875/0.60 = 78.125; NH3 needed = 78.125/0.50 = 156.25 mol. Volume = 156.25 × 22.4 = 3500 L.

Teacher's Note: Work backwards dividing by each step's yield.

Exam Note: Option (a) is moles, not litres.

Question L2.8. 1 M NaOH solution was slowly added into 1000 mL of 183.75 g impure H2SO4 solution and the following plot was obtained. The percentage purity of H2SO4 sample and slope of the curve respectively are: (Graph: [H+] (mol/L) on the y-axis falls linearly from 3 at zero NaOH to 0 when 3 L of NaOH have been added; x-axis is volume of NaOH added in litres.)

320Volume of NaOH added (L)[H+] (mol/L)31.5(0, 3)(3, 0)

(a) 75%, −1/3   (b) 80%, −1/2   (c) 80%, −1   (d) None of these

Solution. Answer (from key): (c) 80%, −1. Initial [H+] = 3 M in 1 L = 3 mol H+ = 1.5 mol H2SO4 = 147 g. Purity = 147/183.75 = 80%. The line passes from (0, 3) to (3, 0): slope = −3/3 = −1.

Teacher's Note: Initial [H+] gives moles of acid; slope is rise over run.

Exam Note: Slope = −1 mol/L per litre of NaOH.

Question L2.9. MnO2 on ignition converts into Mn3O4. A sample of pyrolusite having 75% MnO2, 20% inert impurities and rest water is ignited in air to constant weight. What is the percentage of Mn in the ignited sample?

(a) 24.6%   (b) 37%   (c) 55.24%   (d) 74.05%

Solution. Answer (from key): (c) 55.24%. Take 100 g: MnO2 = 75 g = 0.862 mol (Mn = 47.4 g). 3MnO2 → Mn3O4 + O2: Mn3O4 = 0.2874 mol × 229 = 65.8 g. Residue = 65.8 + 20 = 85.8 g (water lost). % Mn = 47.4/85.8 = 55.24%.

Teacher's Note: Water leaves on ignition; inert stays.

Exam Note: Residue = Mn3O4 + impurities.

Question L2.10. A 1.0 g sample of a pure organic compound containing chlorine is fused with Na2O2 to convert chlorine to NaCl. The sample is then dissolved in water, and the chloride precipitated with AgNO3, giving 1.96 g of AgCl. If the molecular weight of the organic compound is 147, how many chlorine atoms does each molecule contain?

(a) 1   (b) 2   (c) 3   (d) 4

Solution. Answer (from key): (b) 2. AgCl = 1.96/143.5 = 0.01366 mol = Cl. Compound = 1/147 = 6.8×10−3 mol. Cl per molecule = 0.01366/0.0068 = 2.

Teacher's Note: Mole of Cl divided by mole of compound.

Exam Note: Answer rounds to integer 2.

Question L2.11. A 0.60 g sample consisting of only CaC2O4 and MgC2O4 is heated at 500°C, converting the two salts to CaCO3 and MgCO3. The sample then weighs 0.465 g. If the sample had been heated to 900°C, where the products are CaO and MgO, what would the mixtures of oxides have weighed?

(a) 0.12 g   (b) 0.21 g   (c) 0.252 g   (d) 0.3 g

Solution. Answer (from key): (c) 0.252 g. Let CaC2O4 = x g: (100/128)x + (84/112)(0.6 − x) = 0.465 gives x = 0.48 g (0.00375 mol); MgC2O4 = 0.12 g (0.00107 mol). Oxides = 0.00375 × 56 + 0.00107 × 40 = 0.210 + 0.043 = 0.252 g.

Teacher's Note: Two unknown masses from the 500°C weight loss.

Exam Note: Each oxalate gives one oxide per mole.

Question L2.12. A metal M forms the sulphate M2(SO4)3. A 0.596 gram sample of the sulphate reacts with excess BaCl2 to give 1.220 g BaSO4. What is the atomic weight of M? (Atomic weights: S = 32, Ba = 137.3)

(a) 26.9   (b) 69.7   (c) 55.8   (d) 23

Solution. Answer (from key): (a) 26.9. BaSO4 = 1.220/233.3 = 5.229 mmol = SO42−; salt = 5.229/3 = 1.743 mmol. M(salt) = 0.596/0.001743 = 342, so 2M + 288 = 342 and M = 26.9.

Teacher's Note: Three sulphates per formula unit of salt.

Exam Note: Molar mass of BaSO4 = 233.3.

Question L2.13. Urea (H2NCONH2) is manufactured by passing CO2(g) through ammonia solution followed by crystallization. CO2 for the above reaction is prepared by combustion of hydrocarbon. If combustion of 236 kg of a saturated hydrocarbon (CnH2n+2) produces as much CO2 as required for production of 999.6 kg urea then molecular formula of hydrocarbon is:

(a) C10H22   (b) C12H26   (c) C13H28   (d) C8H18

Solution. Answer (from key): (b) C12H26. Urea = 999.6 × 1000/60 = 16 660 mol, needing 16 660 mol CO2. Hydrocarbon: (236 000/(14n + 2)) × n = 16 660, giving n ≈ 12. Formula C12H26 (M = 170).

Teacher's Note: One CO2 per urea; n CO2 per alkane.

Exam Note: Check: 236 000/170 × 12 = 16 659.

Question L2.14. 11.6 g of an organic compound having formula CnH2n+2 is burnt in excess of O2(g) initially taken in a 22.41 litre steel vessel. Before reaction the gaseous mixture was at 273 K with pressure reading 2 atm. After complete combustion and loss of considerable amount of heat, the mixture of product and excess O2 had a temperature of 546 K and 4.6 atm pressure. The formula of organic compound is:

(a) C2H6   (b) C3H8   (c) C5H12   (d) C4H10

Solution. Answer (from key): (d) C4H10. Initial gas = 2 mol (alkane a + O2). Final gas at 546 K = 4.6 × 22.41/(0.0821 × 546) = 2.3 mol (water as vapour). Net change per mol alkane = (n − 1)/2, so a(n − 1)/2 = 0.3 with a = 11.6/(14n + 2): n = 4. C4H10.

Teacher's Note: Mole change on burning: (n − 1)/2 per mole alkane.

Exam Note: Water is vapour at 546 K.

JEE Mathematics: Narendra Awasthi Solutions for Narendra Awasthi Solutions Physical Chemistry Chapter 1 Stoichiometry Part 1

Access JEE Mathematics Solutions

Review detailed solutions for JEE Mathematics. The Narendra Awasthi Solutions Physical Chemistry Chapter 1 Stoichiometry Part 1 PDF provides comprehensive answers mapped to standard Narendra Awasthi Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Complete Your JEE Exam Preparation

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Narendra Awasthi Solutions for JEE Chemistry?

They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Narendra Awasthi JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Narendra Awasthi solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Narendra Awasthi JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.