Download JEE Chemistry MS Chauhan Textbook Solutions: Chapter 04 b Hydrocarbons Alkanes
Access comprehensive textbook solutions for Chapter 04 b Hydrocarbons Alkanes using the MS Chauhan reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access MS Chauhan Textbook Answers and Solutions
View or download the dedicated Chapter 04 b Hydrocarbons Alkanes solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
Chapter 4B Hydrocarbons (Alkenes) - Level 1 Questions 158 to 229 and Level 2
Level 1 (continued)
Question 158. What is the product of 1,4-addition in the reaction shown below? Substrate: the conjugated diene (CH3)2C=CH–CH=C(CH3)2 (as drawn), reagent HCl. Options (structures drawn in the book): (a) (CH3)2CH–CH=CH–C(CH3)2Cl; (b) a chain with Cl on a terminal CH2 and the C=C two carbons from it; (c) a drawing closely similar to (a) (see book); (d) an allylic chloride with Cl on a CH2 at the chain end and the C=C at the other end.
Solution. Answer (from key): (a). H+ adds to one terminal carbon of the diene giving an allylic cation; Cl– attacks the other terminus (1,4-addition), so the new double bond sits between the two central carbons: (CH3)2CH–CH=CH–C(CH3)2Cl.
Teacher's Note: 1,4-addition: proton to C1, nucleophile to C4, double bond shifts to C2=C3.
Exam Note: Count carbons from each diene end; double bond moves inward.
Question 159. Compound: 4-methylcyclohexan-1-ol (CH3 and OH on opposite ring carbons, H on each, as drawn). Dehydration of the above compound will give: (a) meso product (b) racemic mixture (c) diastereomer (d) optically pure enantiomer.
Solution. Answer (from key): (b). Acid-catalysed dehydration gives 4-methylcyclohexene. Its C-4 (bearing CH3, H, and two different ring arms) is a stereocentre. Because the planar carbocation/E1 route loses the original configuration of C-1 and C-4 is not influenced by it, both enantiomers form equally: a racemic mixture.
Teacher's Note: Check whether the alkene product has a stereocentre; achiral conditions give racemate.
Exam Note: Chiral product from achiral/racemising path means racemic mixture.
Question 160. The compound (Fischer projection: vertical chain CH2CH3 at top and CH=CH2 at bottom; H on left and Cl on right of the central carbon, i.e. 3-chloropent-1-ene) reacts with HBr in CCl4. What is the stereochemistry of the product? (a) Racemic mixture (b) Optically inactive (c) Diastereomers (d) Meso product.
Solution. Answer (from key): (c). HBr adds across C=C (Markovnikov) to give CH3–CHBr–CHCl–CH2CH3. The original stereocentre (CHCl) keeps its configuration while the new stereocentre (CHBr) forms in both configurations, giving two diastereomers (unequal amounts, optically active).
Teacher's Note: A new stereocentre formed next to an existing one gives diastereomers, not a racemate.
Exam Note: Pre-existing chiral centre retained: product is a diastereomeric pair.
Question 161. HC≡C–CH2CH2CH2CH2–OH (hex-5-yn-1-ol, as drawn) reacts with H2 to give A, which on treatment with H+ gives 2-methyltetrahydropyran. The end product formed in the above reaction is: (a) Optically active (b) Racemic (c) Meso (d) Diastereomer.
Solution. Answer (from key): (b). A is hex-5-en-1-ol. H+ protonates the C=C (Markovnikov, secondary cation at C-5) and the OH attacks it, closing the six-membered ring. The new ring carbon bearing CH3 is a stereocentre formed from a planar cation, so both enantiomers form equally: racemic.
Teacher's Note: Intramolecular attack on a planar carbocation creates the stereocentre in both configurations.
Exam Note: Planar cation plus achiral reagents means racemic product.
Question 162. How many moles of BH3 are needed to react completely with 2 mole of 1-pentene in hydroboration-oxidation reaction? (a) 2 mole (b) 3 mole (c) 2/3 mole (d) 3/2 mole.
Solution. Answer (from key): (c) 2/3 mole. BH3 has three B–H bonds and each adds across one C=C, giving the trialkylborane (CH3CH2CH2CH2CH2)3B: 1 mol BH3 reacts with 3 mol alkene, so 2 mol alkene need 2/3 mol BH3.
Teacher's Note: Each BH3 delivers three hydrides, so stoichiometry is 1 borane to 3 alkene.
Exam Note: Alkene : BH3 = 3 : 1 for unhindered alkenes.
Question 163. Anisole (methoxybenzene) is treated with Li / liq. NH3 to give A, which on treatment with H3O+ gives B. Product (B) is: (a) cyclohexanone (b) cyclohex-2-en-1-one (conjugated enone) (c) 3-methoxyphenol-type ring: a benzene ring with OCH3 and OH meta (d) 4-methoxyphenol: a benzene ring with OH and OCH3 para.
Solution. Answer (from key): (b). Birch reduction of anisole gives 1-methoxycyclohexa-1,4-diene (A). Acid hydrolysis of the enol ether gives cyclohex-3-en-1-one, which isomerises under the acidic conditions to the conjugated cyclohex-2-en-1-one (B).
Teacher's Note: Birch reduction keeps OCH3 on a double bond; acid hydrolyses the enol ether to a ketone.
Exam Note: Birch then H3O+ gives conjugated cyclohexenone.
Question 164. 14CH2=CH–CH3 is treated with low concentration of Br2 at high temperature. Product is: (a) 14CH2=CH–CH2Br (b) CH2=CH–14CH2Br (c) 14CH2Br–CHBr–CH3 (d) both (a) and (b).
Solution. Answer (from key): (d). Low [Br2] and high temperature favour allylic substitution. The allyl radical 14CH2=CH–CH2• ↔ 14CH2•–CH=CH2 is delocalised, so Br can attach at either end, giving both labelled isomers (a) and (b).
Teacher's Note: Allyl radical resonance makes the two terminal carbons equivalent, so the label scrambles.
Exam Note: Allylic bromination with isotopic label gives both positional products.
Question 165. In which of the following reactions will 1,3-butadiene be obtained as a major product? (a) BrCH2CH2CH2CH2Br with (CH3)3COK (2 mole) / (CH3)3COH (b) HOCH2CH2CH2CH2OH with conc. H2SO4 (c) H2C=CH–C≡CH with H2 (1 mole) / Ni2B (d) All of these.
Solution. Answer (from key): (d) All of these. (a) double dehydrohalogenation (E2) with a strong bulky base removes two HBr; (b) acid-catalysed double dehydration of the diol; (c) Ni2B (P-2 catalyst) partially hydrogenates the alkyne of vinylacetylene to the alkene. Each route gives CH2=CH–CH=CH2.
Teacher's Note: Three routes to the same diene: double elimination, double dehydration, partial alkyne reduction.
Exam Note: Check each route; key states all three give 1,3-butadiene.
Question 166. (CH3)2C=CH2 is treated with Cl2 at 20 °C, then 1. H2O 2. Ca(OH)2, then H+, Δ, to give A. Identify A. (a) 2,2-dimethyloxirane (b) (CH3)2CH–CHO (c) CH3COCH2CH3 (d) (CH3)2C=CH2.
Solution. Answer (from key): (b). Cl2/H2O gives the chlorohydrin (CH3)2C(OH)CH2Cl; Ca(OH)2 closes it to 2,2-dimethyloxirane. With H+/Δ the epoxide opens at the tertiary carbon and a hydride shifts from CH2 to the cation (pinacol-type/Meinwald rearrangement), giving the aldehyde 2-methylpropanal.
Teacher's Note: Epoxide to carbonyl rearrangement under acid: tertiary cation then 1,2-hydride shift gives aldehyde.
Exam Note: Acid on epoxide: rearrangement product is an aldehyde, not epoxide.
Question 167. A cyclohexene ring joined through a side chain to a carbon carrying a tertiary-butyl-type group and an OH (as drawn) is heated with H2SO4 to give A. Product (A) is: options (a)–(d) are four fused bicyclic (decalin-type) skeletons differing in the position of methyl/gem-dimethyl groups and double bond (see book).
Solution. Answer (from key): (b). Acid ionises the alcohol; a methyl shift gives a tertiary cation, which is attacked by the ring C=C (cation–olefin cyclisation) to build the second six-membered ring, giving the fused bicyclic product (b) with the gem-dimethyl group at the ring junction side. Structure (b) is as drawn in the book; options not redrawn here.
Teacher's Note: Cation–olefin cyclisation builds the second ring after carbocation rearrangement.
Exam Note: Stable tertiary cation then ring closure; pick the fused product.
Question 168. A cyclohexene whose alkene carbon bears CH3 (label d on that methyl), with ring positions labelled b (alkene CH), c (allylic ring CH2) and a (allylic ring carbon bearing H and CH3, a tertiary allylic C–H), treated with NBS. Bromination takes place at: (a) a (b) b (c) c (d) d.
Solution. Answer (from key): (a). NBS brominates by a radical allylic substitution; the allylic hydrogen removed is the one that gives the most stable radical. Position a is a tertiary allylic C–H, so its radical (tertiary and allylic, further delocalised over the double bond) is the most stable, and bromination occurs there.
Teacher's Note: Allylic NBS reaction: abstract the weakest (tertiary allylic) C–H to give the most stable radical.
Exam Note: Rank allylic C–H positions by radical stability: tertiary beats secondary.
Question 169. Which is the incorrect statement about heats of combustion? (a) methylcyclohexane > methylcyclopentane > methylcyclobutane (as drawn: larger ring first) (b) a series of three bicyclic/ring-strained C4H6-type hydrocarbons (bicyclo[1.1.0]-type drawings) in decreasing order, as drawn (c) iso-butene > trans-2-butene > 1-butene (d) n-hexane < n-heptane < n-octane.
Solution. Answer (from key): (c). Isomeric butenes: the less stable the alkene, the higher its heat of combustion. 1-Butene (monosubstituted, least stable) has the largest heat of combustion, then trans-2-butene, and isobutene (most substituted) the smallest: 1-butene > trans-2-butene > isobutene. Statement (c) reverses this, so it is incorrect. In (d) heat of combustion rises with every added CH2.
Teacher's Note: Less stable isomer releases more heat on combustion; more substituted alkene is more stable.
Exam Note: Heat of combustion order: 1-butene highest, isobutene lowest among butenes.
Question 170. Predict the major product of the reaction: (CH3)2C=C(CH3)–CH2–CH=CH2 with m-chloroperbenzoic acid (mCPBA), H+. (a) epoxide on the terminal CH=CH2 (b) epoxide on the tetrasubstituted C=C, vinyl group intact: (CH3)2C(–O–)C(CH3)–CH2–CH=CH2 (c) (CH3)2C=C(CH3)... with a vicinal diol at the terminal alkene (d) vicinal diol at the tetrasubstituted carbons.
Solution. Answer (from key): (b). The peracid is an electrophilic oxidant, so it reacts faster with the more electron-rich (more alkyl-substituted) double bond. The tetrasubstituted C=C is far more nucleophilic than the monosubstituted vinyl group, so it is epoxidised selectively; the epoxide is not opened (no water, diol not formed).
Teacher's Note: Electrophilic peracid epoxidises the most electron-rich (most substituted) C=C first.
Exam Note: Rate of epoxidation rises with alkyl substitution; no diol without water.
Question 171. 1,2-Dihydronaphthalene (benzene ring fused to a cyclohexene) is treated with cold dilute KMnO4. Product of the reaction is: (a) Meso compound (b) Enantiomeric pair (c) Diastereomers (d) Optically pure enantiomer.
Solution. Answer (from key): (b). Cold dilute KMnO4 gives syn (cis) dihydroxylation, producing cis-1,2,3,4-tetrahydronaphthalene-1,2-diol. The two stereocentres are not equivalent (the ring is unsymmetrical), so the cis-diol is chiral. Attack from either face of the alkene is equally likely, giving the two cis enantiomers in equal amounts, i.e. an enantiomeric pair (racemate).
Teacher's Note: Syn addition to a cyclic alkene gives cis diol; two faces give both enantiomers.
Exam Note: Unsymmetrical cis-diol is chiral; achiral reagent gives racemate.
Question 172. The polyene acid (drawn in zigzag/Fischer-type form): HO2C–CH(OCH3)–CH2–CH2–CH2–CH=CH–CH2– ... (a long chain with one stereocentre C-2 bearing OCH3 and one C=C) undergoes ozonolysis (O3 in dichloromethane, then (CH3)2S) to give (A) + (B), where (A) is optically active and (B) is optically inactive. Product (A) of the above reaction is: (a) CH3O–CH(CO2H)–CH2–CH2–CHO (b) CH3O–CH2–CH(CO2H)–CH2–CO2H (c) CH3O–CH(CO2H)–CH2–CH2–CO2H (d) CH3O–CH(CO2H)–CH2–CH2–CH2–CHO.
Solution. Answer (from key): (d). Reductive work-up with dimethyl sulfide (Me2S) cleaves C=C into two aldehyde/carbonyl fragments without further oxidation to acid, so the product keeps a terminal CHO. The fragment from the acid end retains the stereocentre C-2 (OCH3), so it is optically active: CH3O–CH(CO2H)–CH2–CH2–CH2–CHO. The other fragment has no stereocentre and is inactive. (The long chain in the question is only partly legible in the scan; the answer is taken from the key.)
Teacher's Note: Ozonolysis with Me2S gives aldehydes; the fragment keeping the stereocentre stays optically active.
Exam Note: Reductive work-up gives CHO, not COOH; track the stereocentre.
Question 173. 3-Phenylcyclopent-2-en-1-one (a cyclopentenone bearing a phenyl group on the alkene carbon, as drawn) is treated with H2 (2–3 atm, 1 mole), 10% Pd/C. Products: comment upon optical activity of the products. (a) Diastereomers (b) Racemic mixture (c) Meso (d) Optically pure enantiomer.
Solution. Answer (from key): (b). One mole of H2 reduces the C=C of the conjugated enone (the aromatic ring and C=O survive) to give 3-phenylcyclopentanone. C-3 becomes a stereocentre (H, phenyl, and two different ring arms), and H2 adds equally to both faces of the planar alkene, so a racemic mixture forms.
Teacher's Note: Hydrogen adds to either face of a planar alkene, forming equal enantiomers.
Exam Note: New stereocentre from achiral hydrogenation means racemic mixture.
Question 174. A cyclohexene ring bearing CHO on the alkene carbon (an enal) and an isopropenyl group (C(CH3)=CH2) on the ring (as drawn) is treated with HBr (1 mole). Addition of a mineral acid to an olefin bond leads to the major product; identify it. (a) Br on the ring carbon next to the CH=O side (b) Br on a CH2 at the end of a side-chain (c) Br on the tertiary side-chain carbon: –C(CH3)2Br, with the enal intact (d) Br on a ring carbon, isopropenyl intact.
Solution. Answer (from key): (c). The conjugated C=C of the enal is electron-poor and deactivated towards electrophiles, whereas the isopropenyl C=C is electron-rich. H+ adds to the terminal CH2 to give the tertiary carbocation, which Br– captures, giving the tertiary bromide –C(CH3)2Br (Markovnikov addition).
Teacher's Note: Electron-poor enal C=C resists HBr; isopropenyl C=C reacts via tertiary cation.
Exam Note: Markovnikov: Br goes to the more substituted carbon of the isolated alkene.
Question 175. Limonene-type diene (a cyclohexene with a methyl on the ring double bond and an isopropenyl group at C-4, as drawn) is treated with H2 (one mole), PtO2. In polyenes that contain differently substituted C=C double bonds, it is possible to hydrogenate chemoselectively one C=C double bond. Product is: (a) both alkenes retained, isomer drawn (b) ring C=C retained, isopropenyl reduced to isopropyl (c) gem-dimethyl ring, ring C=C retained (d) isopropylidene (tetrasubstituted exocyclic C=C) retained.
Solution. Answer (from key): (b). The less substituted, less hindered 1,1-disubstituted isopropenyl C=C adsorbs on the catalyst surface more readily and is hydrogenated first, giving 4-isopropyl-1-methylcyclohexene; the more hindered trisubstituted ring C=C is left intact with one mole of H2.
Teacher's Note: Catalytic hydrogenation: less substituted, less hindered C=C reacts faster.
Exam Note: Rate of hydrogenation falls as substitution of the alkene rises.
Question 176. An allylic alcohol of the type CH2=CH–CH(OH)–R (terminal vinyl group next to a carbinol carbon, as drawn) is treated with MCPBA (m-chloroperbenzoic acid). Stereochemistry of the product of the above reaction is: (a) Meso (b) Racemic (c) Diastereomers (d) Optically inactive due to absence of chiral center.
Solution. Answer (from key): (b). MCPBA converts the C=C into an epoxide by syn addition of oxygen. The carbinol carbon of the substrate is not a stereocentre in the racemic/achiral starting alcohol as drawn, and the new epoxide carbon becomes a stereocentre. The peracid attacks both faces of the alkene equally, so both enantiomers of the epoxy alcohol form in equal amounts: a racemic mixture.
Teacher's Note: Epoxidation of a planar alkene with an achiral peracid gives equal enantiomers.
Exam Note: Achiral reagent plus prochiral alkene gives racemic epoxide.
Question 177. A spiro ketone (a cyclohexanone whose carbon next to C=O is the spiro carbon of a cyclobutane ring, i.e. spiro[3.5]nonan-5-one, as drawn) is treated with conc. H2SO4. Identify product (P). Options (a)–(d) are spiro[4.4]nonane skeletons: (a) and (b) are spirocyclic ketones with C=O at different ring positions, (c) and (d) contain a ring C=C in addition to C=O (see book).
Solution. Answer (from key): (b). Protonation of the carbonyl gives a carbocation next to the strained cyclobutane. A 1,2-alkyl shift expands the four-membered ring to a five-membered ring (relief of ring strain) and the six-membered ring contracts or rearranges accordingly, finally giving a stable spiro[4.4]nonanone, structure (b) as drawn in the book. Options (c) and (d) are unsaturated and not expected under these conditions.
Teacher's Note: Cyclobutylcarbinyl-type cation expands the ring to relieve angle strain.
Exam Note: Ring expansion cyclobutane to cyclopentane is the driving force.
Question 178. A (an octalin-type bicyclic with an allyl side chain on a ring C=C, as drawn) isomerises to B on addition of traces of acid H2SO4. Compound (B) is: (a) exocyclic propylidene with ring C=C at the ring-fusion carbon (b) allyl chain retained, C=C moved to a different ring position (c) propylidene-type exocyclic C=C conjugated with the ring C=C (a conjugated diene), as drawn (d) propyl side chain with C=C in the ring and an additional ring C=C, no conjugation to the side chain.
Solution. Answer (from key): (c). Acid protonates an alkene to give a carbocation, then loses H+ from a different carbon, shifting the double bond. Isomerisation continues until the most stable alkene is formed. Moving the side-chain C=C into conjugation with the ring C=C gives a conjugated diene, which is stabilised by delocalisation and is the thermodynamic product (c).
Teacher's Note: Acid-catalysed isomerisation gives the thermodynamically most stable (conjugated, more substituted) alkene.
Exam Note: Conjugation lowers energy: acid isomerises toward conjugated diene.
Question 179. A polycyclic tertiary alcohol with R and OH on adjacent ring carbons, flanked by four-membered rings (a cyclohexane core with spiro/fused cyclobutane rings, as drawn) is treated with SOCl2, pyridine, Δ to give A. Product (A) of the reaction is: (a) a dehydration product keeping all cyclobutane rings (b) a product in which the four-membered rings have expanded to cyclopentane rings, carrying Cl and R (c) a dehydration product with a C=C in the core (d) None of these.
Solution. Answer (from key): (b). Loss of the chlorosulfite gives a carbocation next to a cyclobutane ring. Ring expansion (cyclobutylcarbinyl to cyclopentyl cation, relieving angle strain) occurs repeatedly along the ring system, converting the cyclobutane rings into cyclopentane rings, and chloride finally captures the cation, so the product contains Cl and R on a polycyclopentane framework (b). The full structure is given in the book scan and is not redrawn here.
Teacher's Note: Strained cyclobutane rings next to a cation expand to cyclopentane via alkyl shifts.
Exam Note: Ring expansion beats simple elimination when it relieves strain.
Question 180. A cyclopropane carrying three CH2OH groups (cyclopropane-1,2,3-triyltrimethanol, as drawn with OH at the ends of the three side arms) is heated with excess H+ (Δ) to give A. Product (A) is: (a) a methylenecyclopentane-type bicyclic (b) a bicyclopropylidene-type compound (c) benzene (d) methylenecyclobutane.
Solution. Answer (from key): (c) benzene. The triol is C6H12O3; loss of three H2O gives C6H6 which matches benzene. Acid ionises the alcohols to cations and the cyclopropane ring opens/expands (cyclopropylcarbinyl–cyclobutyl–homoallyl rearrangements) so that successive eliminations end in the aromatic, very stable benzene ring.
Teacher's Note: Formula check: C6H12O3 minus 3 H2O is C6H6, benzene.
Exam Note: Aromatic stability is the driving force; count atoms to confirm.
Question 181. Which of the following reactions do not represent the major product of the given Birch reductions? (i) benzene-type substrate Na / liq. NH3 giving the 1,4-cyclohexadiene (as drawn) (ii) benzene → 1,4-cyclohexadiene (iii) toluene → 1-methylcyclohexa-1,4-diene (iv) benzoic acid → the diene drawn (v) naphthalene → 1,4-dihydronaphthalene (vi) anthracene → ring-terminal reduction drawn (vii) 2-butyne with Na / liq. NH3 → cis-2-butene. Options: (a) (i), (iii), (vi) (b) (iv), (vi), (vii) (c) (iv), (v), (vi) (d) (i), (ii), (v), (vii).
Solution. Answer (from key): (b). (vi) is wrong because anthracene is reduced in the central ring (9,10-dihydroanthracene), not at a terminal ring. (vii) is wrong because Na / liq. NH3 reduces alkynes by anti addition to give the trans-alkene (trans-2-butene), not cis. (iv) is listed by the key as not the major product as drawn: for benzoic acid (electron-withdrawing group) the CO2H must end up on an sp3 carbon of the 1,4-diene (2,5-cyclohexadiene-1-carboxylic acid), whereas alkyl groups stay on sp2 carbons as in (iii).
Teacher's Note: Birch: EDG stays on alkene carbon, EWG on sp3 carbon; alkynes give trans-alkenes.
Exam Note: Dissolving-metal alkyne reduction gives trans; anthracene reduces at C-9, C-10.
Question 182. 4-Alkoxyindene (indene with an OR group on the benzene ring, as drawn) is treated with BH3, then H2O2, HO– to give (A). Hint: think carefully about the relative stabilization of developing positive charge when the double bond reacts with an electrophile. Product (A) is: (a) OH on the carbon of the five-membered ring next to the benzene ring (b) OH on the five-ring carbon away from the benzene ring (2-indanol type) (c) cyclopentene with OH retained (d) OH on the benzylic carbon plus OH on the aromatic side.
Solution. Answer (from key): (b). In the electrophilic hydroboration step the boron adds to the alkene carbon that carries less positive charge character, i.e. the carbon away from the benzylic (and more positive, ring-stabilised) carbon; H goes to the benzylic carbon. Oxidation (H2O2/HO–) then replaces B by OH with retention, so the OH ends on the non-benzylic ring carbon (syn addition of H and OH): the 2-indanol-type product (b).
Teacher's Note: Boron goes to the carbon with less developing positive charge; benzylic carbon takes H.
Exam Note: Anti-Markovnikov syn H/OH addition; OH ends away from the benzylic carbon.
Question 183. Cyclohexene is treated with HOCl to give (A), which with NaOH, H2O, 25 °C gives (B) (70%). Correct statement about the above reaction is: (a) A = cis-2-chlorocyclohexanol, B = cyclohexene oxide (b) A = trans-2-chlorocyclohexanol, B = anti-diol (c) A = trans-2-chlorocyclohexanol, B = cyclohexene oxide (d) A = cis-2-chlorocyclohexanol, B = anti-diol.
Solution. Answer (from key): (c). HOCl adds through a chloronium ion that water opens from the back face, so Cl and OH are trans: A = trans-2-chlorocyclohexanol. With NaOH the alkoxide attacks the carbon bearing Cl from the side opposite to Cl (intramolecular SN2, trans-diaxial arrangement), closing the three-membered ring: B = cyclohexene oxide (epoxide).
Teacher's Note: Halohydrin formation is anti; base then closes it to an epoxide by intramolecular SN2.
Exam Note: Halohydrin plus base gives epoxide, not diol.
Question 184. A bicyclic dienone (a cyclohexa-2,5-dienone ring fused to a saturated ring with an angular CH3 at the ring junction carbon, as drawn) is treated with H+. Predict the major product. Options: (a) a phenol with a single ring (b) a naphthol with a methyl (c) a tetralin (tetrahydronaphthalene) with OH on the aromatic ring and CH3 on the ring carbon next to the junction (d) a tetralin with CH3 on the saturated ring and no OH.
Solution. Answer (from key): (c). This is a dienone–phenol rearrangement. Protonation of C=O gives a cation delocalised on the ring; the angular methyl group migrates (1,2-shift) to the adjacent ring carbon, which makes the six-membered ring aromatic after loss of H+. The product is a hydroxy-methyl-tetralin: OH on the aromatic ring, CH3 now on an aromatic carbon (c).
Teacher's Note: Dienone–phenol rearrangement: quaternary carbon loses a group by 1,2-shift to regain aromaticity.
Exam Note: Aromatisation drives methyl migration; OH ends on the new benzene ring.
Question 185. 3,4,4-Trimethylcyclohexa-2,5-dien-1-one (a cyclohexadienone with one methyl on the double-bond carbon next to the C-4 quaternary carbon and gem-dimethyl at C-4, as drawn) is treated with H2SO4 to give (A) (major). Product (A) is: (a) an OH-free trimethylbenzene (b) 2,6-dimethylphenol-type isomer (OH with two methyls at the ortho positions) (c) 3,4-dimethylphenol (OH with methyls meta and para) (d) a phenol with methyls ortho and para.
Solution. Answer (from key): (c). Dienone–phenol rearrangement: protonation of C=O gives a cation; one methyl on the quaternary C-4 migrates to the neighbouring C-3 (adjacent ring carbon), and loss of H+ restores aromaticity. The product is 3,4-dimethylphenol with OH from the former carbonyl, the methyls on the carbons meta and para to it.
Teacher's Note: Migrate one gem-dimethyl methyl to the adjacent ring carbon to aromatise.
Exam Note: Methyl migrates only to the neighbouring carbon, not further.
Question 186. 1-Bromocyclohexene (Br on an alkene carbon, H on the other, as drawn) reacts with 82Br–82Br in CCl4. Major product of the reaction is: (a) C-1 bearing Br (wedge) and H; C-2 with two 82Br labels (b) C-1 bearing Br and 82Br; C-2 bearing H and 82Br, the two 82Br atoms trans (anti addition) (c) C-1 with Br82 and Br82, C-2 with H and Br (d) C-1 with CH3-type wedge, C-2 with 82Br2.
Solution. Answer (from key): (b). Br2 adds anti across the C=C through a bromonium ion. Both new bromine atoms are the labelled 82Br: one goes on C-1 (which already carries the original Br, so C-1 is CBr(82Br)) and the other goes on C-2 (which keeps its H), on opposite faces (trans). The original Br is therefore retained on C-1 and only two 82Br atoms are added.
Teacher's Note: Bromine adds anti; original vinylic Br stays, only the two labelled atoms add.
Exam Note: Anti addition: two 82Br on opposite faces, original Br unchanged.
Question 187. 3-Methylcyclopent-1-ene (a single enantiomer, stereocentre C-3 bearing H and CH3 next to the ring C=C, as drawn) is treated with Br2 in CCl4. Stereochemistry of the product is: (a) Diastereomers (b) Racemic mixture (c) Meso (d) Pure enantiomers.
Solution. Answer (from key): (a). Br2 adds anti. Attack on the face syn to CH3 and attack on the face anti to CH3 are not equally likely and lead to different products (trans-1,2-dibromo-3-methylcyclopentanes with Br either cis or trans to the CH3). Because the C-3 stereocentre is retained, these two products are diastereomers.
Teacher's Note: Existing stereocentre makes the two faces of the alkene diastereotopic, so products are diastereomers.
Exam Note: Chiral starting alkene gives diastereomers, not an enantiomer pair.
Question 188. 4-Methylcyclopent-1-ene (ring C=C at the top, C-4 bearing H and CH3, as drawn) is treated with Br2 in CCl4. Product/s obtained is/are: (a) Diastereomers (b) Racemic (c) Meso (d) Optically pure enantiomers.
Solution. Answer (from key): (b). The ring is symmetric about the plane through C-4 and the middle of the C=C, so the substrate is achiral. Anti addition of Br2 gives trans-1,2-dibromo-4-methylcyclopentane; bromonium formation on one face and opening at C-1 or C-2 gives mirror-image products in equal amounts, so the product is optically inactive as a racemic (equal enantiomers) mixture. As printed in the key (b).
Teacher's Note: Achiral alkene plus Br2: equal amounts of enantiomeric trans-dibromides form.
Exam Note: Achiral substrate and reagent can never give optically active product.
Question 189. Fluorenone (9H-fluoren-9-one) is treated with Ph3P=CH2, then again with Ph3P=CH2 to give (x). Product (x) is: (a) 9-methylenefluorene (b) the spiro-cyclopropane at C-9 of fluorene (spiro[cyclopropane-1,9'-fluorene]) (c) 9-ethylidenefluorene (d) fluorene (9H-fluorene).
Solution. Answer (from key): (b). The first equivalent of the Wittig reagent converts C=O into the C=CH2 of 9-methylenefluorene. This alkene is activated (conjugated with the two aryl rings and acts as an electron-poor acceptor), so the second equivalent of the ylide adds a CH2 unit to it, closing a three-membered ring: the spiro-cyclopropane (b). The answer is taken as printed in the key.
Teacher's Note: Wittig first makes the exocyclic alkene; excess ylide then adds CH2 to give a cyclopropane.
Exam Note: One ylide equivalent gives alkene; a second can cyclopropanate it.
Question 190. CH3CH2CH2CH2–C(CH3)2–CH2–OH is heated with H+ to give (A) (major). Product (A) is: (a) CH3CH2CH2CH2–C(CH3)=CH–CH3 (b) CH3CH2CH2CH2–CH=C(CH3)2 (c) CH3CH2CH2CH2–C(CH3)=CH2 (terminal alkene) (d) CH3CH2CH(CH3)–CH2–C(CH3)=CH2.
Solution. Answer (from key): (b). The neopentyl-type primary alcohol ionises with a concerted 1,2-alkyl shift, because a primary cation is not formed. The larger alkyl group (butyl) migrates from the quaternary carbon to the CH2 carbon, leaving a tertiary cation (CH3)2C+–CH2–C4H9, which loses H+ to give the trisubstituted alkene C4H9–CH=C(CH3)2, option (b). The answer is taken from the key; a methyl shift giving (a) is the competing path.
Teacher's Note: Neopentyl-type alcohol: alkyl shift with water loss, then Zaitsev elimination.
Exam Note: Rearrange to tertiary cation, then form the more substituted alkene.
Question 191. CH3–CH=CH–CH3 reacts with HBr in the presence of R2O2, Δ (anti-Markownikoff's addition). Comment on optical activity of the products: (a) Racemic (b) Diastereomer (c) Meso (d) Optically pure enantiomer.
Solution. Answer (from key): (a). Peroxide-induced radical addition of HBr to the symmetrical alkene 2-butene gives 2-bromobutane, CH3CHBrCH2CH3, which has one stereocentre. The planar carbon radical is trapped by H from either face with equal probability, so the R and S enantiomers form in equal amounts: a racemic mixture.
Teacher's Note: Radical intermediate is planar; H-atom transfer from either face gives a racemate.
Exam Note: One new stereocentre from achiral reagents means racemic product.
Question 192. 1,4,5,8-Tetrahydronaphthalene (two six-membered rings fused; a tetrasubstituted C=C at the ring junction and one isolated C=C in each ring, as drawn) is treated with peracetic acid (CH3CO3H) to give (A) (major). Product (A) is: (a) epoxide on one of the ring C=C only, junction C=C intact (b) epoxide on the ring-junction (tetrasubstituted) C=C, other two C=C intact (c) diol on one ring C=C (d) diol on the ring-junction carbons.
Solution. Answer (from key): (b). The peracid is an electrophile and reacts fastest with the most electron-rich, most alkyl-substituted C=C. The ring-junction C=C is tetrasubstituted, so it is epoxidised selectively, leaving the two disubstituted ring C=C bonds untouched. Peracetic acid without water gives the epoxide, not the diol.
Teacher's Note: Electrophilic peracid picks the most substituted, most electron-rich C=C.
Exam Note: Tetrasubstituted alkene epoxidises first; no water, so no diol.
Question 193. Alkene (A) gives a racemic mixture with RCO3H, H2O, and gives a meso compound with cold dilute KMnO4. Alkene (A) will be: (a) cis-2-pentene (b) cis-2-hexene (c) cis-4-octene (d) trans-2-hexene.
Solution. Answer (from key): (c). RCO3H/H2O gives anti-dihydroxylation, while cold dilute KMnO4 gives syn-dihydroxylation. A symmetric cis-alkene gives a meso diol by syn addition and a racemic diol (R,R + S,S) by anti addition. Only cis-4-octene, CH3CH2CH2CH=CHCH2CH2CH3, is both cis and symmetrical; the unsymmetrical alkenes in (a), (b) and (d) cannot give meso products.
Teacher's Note: Syn addition to a symmetric cis-alkene gives meso; anti addition gives racemate.
Exam Note: Meso product needs a symmetric alkene; match syn/anti with cis/trans.
Question 194. cis- or trans-2,3-dimethyloxirane (as drawn, the two methyl groups on opposite faces of the ring: one wedge and one hashed) reacts with PPh3 to give (A) (major) + POPh3. Product (A) is: (a) trans-2-butene (b) cis-2-butene (c) 1-butene (d) isobutene.
Solution. Answer (from key): (b). Triphenylphosphine deoxygenates an epoxide stereospecifically with inversion of alkene geometry: PPh3 attacks a carbon from the back (SN2), opening the ring to a betaine; rotation about the C–C bond and syn-elimination of Ph3P=O (via a four-membered oxaphosphetane) gives the alkene of opposite geometry. The trans-epoxide drawn therefore gives cis-2-butene.
Teacher's Note: PPh3 deoxygenation of epoxides inverts geometry: trans-epoxide gives cis-alkene.
Exam Note: Inversion of stereochemistry is the key point; oxygen leaves as POPh3.
Question 195. In which of the following reactions will two products form other than the phosphonium oxide (POPh3)? (a) cyclohexanone + Ph3P=CH2 (b) CH3CHO + Ph3P=C(CH3)2 (c) PhCHO + Ph3P=CH–Ph (d) HCHO + Ph3P=CH–CH3.
Solution. Answer (from key): (c). A Wittig reaction gives an alkene plus Ph3P=O. Only in (c) can the alkene exist as geometrical isomers: PhCH=CHPh (stilbene) forms as a mixture of cis (Z) and trans (E) products. In (a) methylenecyclohexane, (b) (CH3)2C=CHCH3 and (d) CH3CH=CH2 only one alkene is possible.
Teacher's Note: Count distinct alkenes: only stilbene has E/Z isomers among the four products.
Exam Note: Geometrical isomerism is the source of the two Wittig alkene products.
Question 196. To carry out the given conversions of an ozonide (a five-membered cyclic ozonide with R1, R2, H, R2 substituents), select the correct option. Conversion a gives R1COR2 + R2CO2H; conversion b gives R1COR2 + R2CHO; conversion c gives R1CH(OH)R2 + R2CH2OH. (a) a = Ag2O, b = Zn/CH3CO2H, c = LiAlH4 (b) a = H2O2, b = CH3–S–CH3, c = NaBH4 (c) Both (a) and (b) (d) None of these.
Solution. Answer (from key): (c). Oxidative work-up (H2O2 or Ag2O) turns aldehyde fragments into carboxylic acids, giving ketone + acid (conversion a). Reductive work-up with Zn/CH3CO2H or (CH3)2S stops at aldehyde + ketone (conversion b). Hydride reagents (LiAlH4 or NaBH4) reduce the carbonyl products to alcohols (conversion c). Both reagent sets (a) and (b) are valid.
Teacher's Note: Ozonide work-up: oxidative gives acids, mild reductive gives aldehydes, hydride gives alcohols.
Exam Note: Match each work-up reagent with its product class.
Question 197. The product (A) of the given alkoxymercuration–demercuration is: 1-methylcyclohexene with (1) Hg(O2CCF3)2, CH3OH, (2) NaBH4, HO– gives (A) (major). (a) 2-methoxy-1-methylcyclohexane (b) 1-methoxy-1-methylcyclohexane (c) 1-methylcyclohexan-1-ol (d) 2-methylcyclohexan-1-ol.
Solution. Answer (from key): (b). Mercuric trifluoroacetate forms a mercurinium ion; methanol attacks the more substituted (tertiary) carbon, which bears more positive charge (Markovnikov), and NaBH4 replaces the Hg by H. The product is the tertiary methyl ether, 1-methoxy-1-methylcyclohexane. No rearrangement occurs.
Teacher's Note: Nucleophile adds at the more substituted carbon; NaBH4 replaces Hg by H.
Exam Note: Alcohol solvent gives an ether, not an alcohol; Markovnikov regiochemistry.
Question 198. CH3–C(ONa)=CH2 (as drawn, the sodium salt of acetone enolate form) with HC≡CH, then H+, then H2 / Pd–BaSO4, then Al2O3, Δ. End product of the reaction is: (a) H2C=CH–C(CH3)=CH2 (b) CH3–CH=CH–CH=CH2 (c) H2C=CH–CH=CH2 (d) H2C=CH–CH2–CH=CH2.
Solution. Answer (from key): (a). Acetone (in its sodium enolate form) and acetylene combine to give the tertiary propargyl alcohol 2-methylbut-3-yn-2-ol, (CH3)2C(OH)–C≡CH (after H+). H2 over Lindlar-type Pd–BaSO4 reduces the triple bond to the double bond: (CH3)2C(OH)–CH=CH2. Heating with Al2O3 dehydrates it to isoprene, CH2=CH–C(CH3)=CH2.
Teacher's Note: Carbonyl addition of acetylide, partial reduction, then dehydration gives isoprene.
Exam Note: Four carbons from the alkyne chain plus methyl: isoprene skeleton.
Question 199. Major product of the given reaction is: H2C=CH–CH2–I with HI (excess) in CCl4. (a) CH3–CHI–CH2I (b) CH3–CHI–CH3 (c) CH3–CH2–CH2–I (d) I–CH2–CH2–CH2–I.
Solution. Answer (from key): (b). HI adds to the alkene by Markovnikov addition to give CH3–CHI–CH2I (1,2-diiodopropane). Vicinal diiodides are unstable and lose I2 readily, giving propene; excess HI then adds again (Markovnikov) to give 2-iodopropane, CH3CHICH3 (with I2 as by-product).
Teacher's Note: Vicinal diiodide loses I2 to give alkene; HI then adds Markovnikov.
Exam Note: Unstable vicinal diiodides eliminate I2; product is 2-iodopropane.
Question 200. The rate constant for a reaction can be increased by a the stability of the reactant or by b the stability of the transition state. Select the correct choice for a and b. (a) decreasing, decreasing (b) increasing, decreasing (c) decreasing, increasing (d) increasing, increasing.
Solution. Answer (from key): (c). The activation energy is the energy gap between reactant and transition state. Decreasing the stability of the reactant raises its energy, and increasing the stability of the transition state lowers its energy; both reduce the gap, lower the activation energy and raise the rate constant (Arrhenius: k = A e–Ea/RT).
Teacher's Note: Rate depends on the energy gap; destabilise reactant or stabilise transition state.
Exam Note: Smaller activation energy gives larger k; read both effects together.
Question 201. Major product of the given reaction is: H2C=CH2 + (CH3)2C=CH2 with H+, Δ. Options (structures drawn): (a) a C6 alkene with a quaternary carbon (b) a branched alkene with a tertiary carbon and terminal C=C (c) the tetrasubstituted alkene (CH3)2C=C(CH3)2 (d) H2C=C(CH3)–CH2–CH2–CH3.
Solution. Answer (from key): (c). H+ protonates isobutene to the tertiary cation (CH3)3C+, which adds to ethene giving (CH3)3C–CH2–CH2+. This primary cation rearranges: a 1,2-hydride shift gives the secondary cation (CH3)3C–CH+–CH3, then a 1,2-methyl shift gives the tertiary cation (CH3)2C+–CH(CH3)2. Loss of H+ gives the most substituted (Zaitsev) alkene, 2,3-dimethylbut-2-ene (C6H12).
Teacher's Note: Cation adds to ethene, then H and CH3 shifts reach the tertiary cation.
Exam Note: Track cation rearrangements; final alkene is the most substituted.
Question 202. Cyclohexanone + Ph3P=CH2 gives (A) (major). Major product (A) is: (a) 1-methylcyclohexene (b) 3-methylcyclohexene (c) methylenecyclohexane (d) cyclohexylmethanol-type alcohol (cyclohexanol with CH3).
Solution. Answer (from key): (c). The Wittig reaction replaces C=O by C=CH2 at the same carbon: the ylide carbon attacks the carbonyl carbon, an oxaphosphetane forms, and Ph3P=O leaves. The double bond is therefore fixed in the exocyclic position (methylenecyclohexane), with no isomerisation to the endocyclic alkene.
Teacher's Note: Wittig fixes the C=C exactly where the C=O was.
Exam Note: No rearrangement in Wittig: exocyclic alkene, not 1-methylcyclohexene.
Question 203. In the given reaction, only one alkene undergoes preferential oxidation by electrophilic ozone. Identify product (P): a cyclohexa-1,4-diene bearing OCH3 on one ring carbon of an enol-ether C=C and a methyl group on the ring, with a second isolated C=C (as drawn), treated with O3, Me2S, –78 °C, then NaBH4 (P) (>52%). (a) a ring-opened chain with CO2CH3 and CHO groups and the other C=C intact (b) a ring-opened chain with CO2CH3 and CH2OH groups and the other C=C intact (c) CH3COCH2CH=C(OMe)CH2CHO (d) CH3CH(OH)CH2CH=C(OMe)CH2CH2OH.
Solution. Answer (from key): (b). Ozone is an electrophile and attacks the more electron-rich double bond, which is the enol ether C=C (the one carrying OCH3), leaving the isolated C=C untouched. Cleaving the enol ether carbon bearing OCH3 gives a methyl ester at that carbon (the ozonide of an enol ether becomes an ester), and the other carbon gives an aldehyde. NaBH4 reduces the aldehyde to the primary alcohol CH2OH, giving the hydroxy ester (b), while the ester is not reduced by NaBH4.
Teacher's Note: Electron-rich enol ether C=C reacts first with ozone; NaBH4 reduces CHO but not the ester.
Exam Note: Enol ether cleaves to an ester; aldehyde then reduced to alcohol.
Question 204. A cyclohexene ring carrying an OH on the ring carbon next to the alkene (an allylic alcohol) and a 3-butenyl side chain (–CH2CH2CH=CH2) on the adjacent ring carbon (as drawn) reacts with HCl to give (P) (major). Product (P) is one of four bicyclic compounds: (a) a decalin-type with a methyl and ring C=C (b) a decalin with Cl at the ring junction and a ring C=C (c) a decalin with Cl at the ring junction and a different C=C position (d) a bicyclic with Cl on the new ring carbon and the original ring C=C retained.
Solution. Answer (from key): (d). H+ ionises the allylic alcohol to an allylic carbocation. The terminal C=C of the side chain attacks this cation (cation–olefin cyclisation), closing a new six-membered ring and generating a secondary carbocation on the new ring; chloride captures it. The product is a decalin-type bicyclic with Cl on the new ring and the ring C=C retained (d).
Teacher's Note: Allylic cation is attacked by the tethered alkene to form a six-membered ring.
Exam Note: Cation-olefin cyclisation then Cl– capture; ring size sets the product.
Question 205. Cyclohex-2-en-1-ylacetic acid (a cyclohexene ring bearing a CH2CO2H group on the carbon next to the C=C, as drawn) is treated with I2, NaHCO3 to give (A); major product of the reaction is: (a) an unsaturated lactone with I on the ring carbon bonded to O (b) a five-membered iodolactone (hexahydrobenzofuranone type) with I on the ring carbon adjacent to the O-bearing carbon (c) the lactone without iodine (d) the lactone with I on the carbon next to C=O.
Solution. Answer (from key): (b). This is an iodolactonisation. I2 forms an iodonium ion on the C=C; the carboxylate (from NaHCO3) attacks the nearer alkene carbon from the back face, forming a five-membered γ-lactone (O–C(=O)–CH2–C–C ring). Iodine is left on the other former alkene carbon, trans to the new C–O bond.
Teacher's Note: Iodonium ion opens by intramolecular carboxylate attack; five-membered lactone preferred.
Exam Note: Anti addition: iodine and lactone oxygen end up trans on adjacent carbons.
Question 206. Ph–CH(OH)–C≡C–C≡C–CH... (a phenyl carbinol joined to an enyne/diyne chain ending in an OCH3 group, as drawn: PhCH(OH)–CH=CH–CH=CH–OMe after partial reduction) reacts with H2, Pd–BaSO4 to give (A), then H3O+ to give (B). Product (B) is: (a) Ph–CH(OH)–CH=CH–CH2–CHO (b) Ph–CH=CH–CHO (c) Ph–(CH=CH)2–CHO (d) Ph–(CH=CH)3–CHO.
Solution. Answer (from key): (c). Pd–BaSO4 (a poisoned catalyst) reduces the triple bonds to cis double bonds only, giving a dienyl ether PhCH(OH)–CH=CH–CH=CH–OCH3 (A). In aqueous acid the enol ether hydrolyses to the aldehyde with loss of CH3OH, and the allylic benzylic OH is lost as water (vinylogous elimination), forming the fully conjugated 5-phenylpenta-2,4-dienal, Ph–CH=CH–CH=CH–CHO. (The exact drawing of the substrate in the scan is partly unclear; the answer is taken from the key.)
Teacher's Note: Poisoned catalyst stops at alkene; acid hydrolyses enol ether and dehydrates to conjugated aldehyde.
Exam Note: Conjugation drives loss of water; count the carbons in the chain.
Question 207. Isobutene, in the presence of H2SO4, forms a mixture of two isomeric alkenes (C8H16). The major alkene is: (a) (CH3)3C–CH=C(CH3)2 (b) (CH3)3C–CH2–C(CH3)=CH2 (c) (CH3)2CH–CH=CH–CH(CH3)2 (d) CH2=C(CH3)–CH2–CH2–CH(CH3)2... (as printed: CH2=C(CH3)–CH2–CH2–CH(CH3)–CH3).
Solution. Answer (from key): (b). H+ converts isobutene into the tert-butyl cation, which attacks a second isobutene molecule to give the tertiary cation (CH3)3C–CH2–C+(CH3)2. Loss of H+ from CH3 gives 2,4,4-trimethylpent-1-ene (b), the major (about 80%) dimer, because the methyl hydrogens are more accessible than the hindered CH2 hydrogens; loss from CH2 gives the minor isomer 2,4,4-trimethylpent-2-ene (a).
Teacher's Note: Tertiary cation dimerises; deprotonation from the less hindered CH3 gives the major terminal alkene.
Exam Note: Dimer is C8H16: 2,4,4-trimethylpent-1-ene is major.
Question 208. An unknown alkene (A) reacts with 3 mole of H2 gas in presence of platinum catalyst to form 1-isopropyl-4-methylcyclohexane. When the unknown alkene (A) is ozonised and reduced, the following products are obtained: H–CHO (formaldehyde), OHC–CH2–CO–CO–CH3, and CH3–CO–CH2–CHO. The alkene (A) is: four ring structures (a)–(d), each bearing an isopropenyl group at C-4 and a methyl at C-1, differing in the positions of the two ring C=C (see book).
Solution. Answer (from key): (b). Three moles of H2 mean three C=C: the isopropenyl C=CH2 (gives HCHO and the ketone C(=O)CH3) and two ring C=C. The CH3–CO–CH2–CHO fragment requires C-1(CH3)=C-2 and C-4=C-5, with C-6H2 between C-1 and C-5; the other fragment, OHC–CH2–CO–CO–CH3, is C-2–C-3H2–C-4 joined to the former isopropenyl carbon. So A is the 1,4-cyclohexadiene 1-methyl-4-isopropenylcyclohexa-1,4-diene, structure (b).
Teacher's Note: Join ozonolysis fragments at the carbonyl carbons to rebuild the ring diene.
Exam Note: Three H2 equals three C=C; map each carbonyl pair back.
Question 209. Cyclohexene reacts with (1) NBS, (2) Mg/ether to give (A); (A) reacts with isobutyraldehyde, (CH3)2CH–CHO, then CH3CH2Br to give (B); (B) with OsO4, H2O2 gives (C). Product (C) is: (a) a cis-diol on the ring with a side chain –CH(OEt)–CH(CH3)2 (one stereochemistry drawn) (b) the cis-diol with the other configuration at the side-chain carbon (c) a trans-diol (hashed OH) (d) both (a) and (b).
Solution. Answer (from key): (b). NBS gives 3-bromocyclohexene; Mg gives the allylic Grignard (A). Addition to the aldehyde gives the secondary alkoxide, and CH3CH2Br alkylates the oxygen to the ether (B), 3-[1-ethoxy-2-methylpropyl]cyclohexene. OsO4/H2O2 is syn dihydroxylation, so the two new OH groups are cis (c is excluded). Key gives the diastereomer (b), in which OsO4 attacks the face anti to the bulky side chain; the exact drawing is in the book.
Teacher's Note: Allylic Grignard adds to aldehyde; O-alkylation; OsO4 adds syn, anti to the bulky side chain.
Exam Note: Syn dihydroxylation gives cis-diol; steric face selectivity picks the isomer.
Question 210. The following reaction takes place in high yields: a polyene ester (a chain with a C=C carrying CO2CH3 and a trisubstituted terminal alkene, as drawn) is treated with Hg(OAc)2, Δ to give the product. Use your knowledge of alkene chemistry to predict a product even though you have never seen this reaction before. Options (a)–(d) are bicyclic decalin-type products; (a) and (b) are organomercury compounds (HgOAc on different carbons), (c) and (d) contain OH.
Solution. Answer (from key): (b). Hg(OAc)2 acts as an electrophile and attacks the most electron-rich terminal alkene, forming a mercurinium ion/tertiary cation. The next C=C of the chain attacks this cation (cation–olefin cyclisation, like polyene cyclisation in steroid synthesis), forming a new six-membered ring and a new cation that is captured to give a fused bicyclic product in which the HgOAc group remains on the carbon where Hg was first attached (b). NaBH4 would be needed to remove Hg, so no OH forms ((c) and (d) are wrong). The drawn structure (b) is as printed in the book.
Teacher's Note: Electrophilic Hg triggers a cascade: alkene attacks cation, ring forms, Hg stays on the product.
Exam Note: No NaBH4 or water, so organomercury (not an alcohol) is the product.
Question 211. o-Xylene (1,2-dimethylbenzene) undergoes (1) O3, (2) Zn to give glyoxal (OHC–CHO), 2,3-butanedione (CH3COCOCH3) and pyruvaldehyde (CH3COCHO). What is the ratio of glyoxal to pyruvaldehyde obtained in the above reaction? (a) 1 : 3 (b) 3 : 1 (c) 3 : 2 (d) 2 : 3.
Solution. Answer (from key): (c) 3 : 2. o-Xylene is treated as a resonance hybrid of two Kekulé structures contributing equally. Ozonolysis cleaves every C=C and the fragments stay joined across the old C–C single bonds. Structure A (the two CH3-bearing carbons doubly bonded): 1 glyoxal + 2 pyruvaldehyde. Structure B (the two CH3-bearing carbons singly bonded): 2 glyoxal + 1 butanedione. Totals: glyoxal 3, pyruvaldehyde 2, butanedione 1, so glyoxal : pyruvaldehyde = 3 : 2.
Teacher's Note: Treat o-xylene as two equal Kekulé forms and count fragments from each.
Exam Note: Add fragments over both Kekulé structures, then take the ratio.
Question 212. Toluene is treated with Na / liq. NH3 to give (A), which with O3, Zn gives products. Which of the following products cannot be obtained in the above reaction? (a) OHC–CH2–CHO (b) CH3–CO–CH2–CHO (c) CH3–CH(CHO)–CHO (d) None of these.
Solution. Answer (from key): (c). Birch reduction of toluene gives 1-methylcyclohexa-1,4-diene (A) with CH3 on a double-bond carbon. Ozonolysis with Zn cleaves both C=C: the ring carbons between the cleavage points give OHC–CH2–CHO (from C-2, C-3, C-4) and CH3–CO–CH2–CHO (from C-1 with CH3, C-6, C-5). A product with the CH3 on a CH carbon bearing two CHO groups, CH3CH(CHO)2, would require the CH3 to sit on an sp3 carbon, which is not formed.
Teacher's Note: Birch keeps CH3 on an alkene carbon, so ozonolysis gives a ketone with CH3.
Exam Note: Methyl on alkene carbon becomes a methyl ketone, never CH(CHO)2.
Question 213. 2,3-Dimethylbut-2-ene (0.025 mol) + (CH3)3N+–O– (TMAO, trimethylamine N-oxide, 0.034 mol) + H2O with OsO4 (10–4 mole) gives A + (CH3)3N. Product (A) is: (a) 2,2,3,3-tetramethyloxirane (b) (CH3)2C(OH)–C(OH)(CH3)2 (c) acetone, CH3COCH3 (d) CH3COC(CH3)3.
Solution. Answer (from key): (b). OsO4 adds syn to the C=C to form an osmate ester, which water hydrolyses to the diol (and reduced osmium). TMAO is the co-oxidant that regenerates OsO4 (itself reduced to (CH3)3N), so only a catalytic amount (10–4 mol) of the toxic OsO4 is needed. The product is pinacol, 2,3-dimethylbutane-2,3-diol.
Teacher's Note: Catalytic OsO4 with TMAO co-oxidant gives syn diol; no C=C cleavage.
Exam Note: Co-oxidant regenerates OsO4; product is a vicinal diol, not ketone.
Question 214. A polyene alcohol (a squalene-like chain: a cyclohexene ring bearing OH, joined to a chain with several trisubstituted C=C and a terminal isopropylidene group, as drawn) is treated with H3O+ to give A. Product (A) of the reaction is: (a) the tetracyclic steroid skeleton (rings A, B, C, D) with a ring C=C and a side chain/OH at the five-membered ring D, angular methyl groups as drawn (b) the same tetracyclic skeleton with the OH on a tertiary side-chain carbon (c) a fully aromatic polycyclic hydrocarbon (chrysene/phenanthrene type) (d) None of these.
Solution. Answer (from key): (a). Acid protonates the terminal C=C to give a tertiary cation; the next C=C attacks it (cation–olefin cyclisation), forming a ring and a new tertiary cation, and the process repeats down the chain (the biosynthetic cascade of squalene to lanosterol/steroids). Four rings are built, and water finally traps the last cation or the cascade ends in elimination, giving the steroid skeleton (a). The structure in (a) is as drawn in the book (not redrawn).
Teacher's Note: Polyene cation-olefin cascade builds the fused four-ring steroid skeleton in one step.
Exam Note: Think squalene to lanosterol: repeated cation attack by the next alkene.
Question 215. 1-Isopropylcyclopentan-1-ol (a cyclopentanol with an isopropyl group on the carbinol carbon, as drawn) is heated with H+ to give (A) (major). Product (A) is: (a) isopropylidenecyclopentane (exocyclic tetrasubstituted C=C) (b) the six-membered ring alkene 1,2-dimethylcyclohexene (ring C=C carrying two methyl groups, as read from the scan) (c) 1-isopropylcyclopentene (d) isopropenylcyclopentane.
Solution. Answer (from key): (b). Protonation and loss of water gives the tertiary 1-isopropylcyclopentyl cation; a 1,2-hydride shift gives the isomeric tertiary cation (CH3)2C+–C5H9. A ring-expansion (alkyl shift of a ring C–C bond) then gives the six-membered 2,2-dimethylcyclohexyl cation, and a methyl shift gives the tertiary 1,2-dimethylcyclohexyl cation, which loses H+ to give the most substituted alkene, the tetrasubstituted 1,2-dimethylcyclohexene. The answer is taken from the key; structure reading from the scan is tentative.
Teacher's Note: Cation rearrangements (H shift, ring expansion, CH3 shift) end at the most stable alkene.
Exam Note: Rearranged tetrasubstituted alkene beats the simple Zaitsev product.
Question 216. Arrange the following in decreasing order of reactivity towards HBr: (a) (CH3)2C=CH2 (b) CH3O(CH3)C=CH2 (c) CH3OCH2(CH3)C=CH2. Options: (a) a > b > c (b) b > a > c (c) b > c > a (d) a > c > b.
Solution. Answer (from key): (b) b > a > c. Reactivity towards electrophilic addition depends on the stability of the carbocation formed. In (b) the OCH3 group stabilises the tertiary cation strongly by lone-pair donation (+M), giving an oxocarbenium ion. In (a) two methyl groups stabilise it by hyperconjugation. In (c) the oxygen is one carbon away and withdraws electrons by the –I effect, which destabilises the cation, so (c) reacts slowest.
Teacher's Note: Rate follows cation stability: +M of OCH3 beats alkyl; –I of CH2OCH3 lowers it.
Exam Note: Compare directly attached OCH3 (donor) and CH2OCH3 (withdrawing).
Question 217. Which reaction has the lowest ΔG‡ (activation energy)? Four hydrobrominations (as drawn, same carbon skeleton): (a) a terminal alkene CH2=CH–R giving the tertiary bromide (b) a more substituted (trisubstituted) alkene giving the tertiary bromide (c) a terminal alkene CH2=CH–R giving the secondary bromide (d) a 1,1-disubstituted alkene giving the tertiary bromide.
Solution. Answer (from key): (d). The rate-determining step is formation of the carbocation. Reactions (b) and (d) give a tertiary cation directly, so their transition states are the most stabilised; (a) needs a hydride shift and (c) gives only a secondary cation. Between (b) and (d), the starting alkene in (d) is less substituted, hence less stable (higher energy), so the energy gap to the same type of transition state is smaller and ΔG‡ is lowest for (d), as in Q.200.
Teacher's Note: Low barrier: stable transition state (tertiary cation) and a high-energy (less substituted) reactant.
Exam Note: Compare cation type first, then ground-state stability of the alkene.
Question 218. Which of the following carbocations will rearrange? (1) a secondary cation next to a quaternary ring carbon (cyclohexane ring bearing a CH+–CH2–type chain, as drawn) (2) a secondary cation on a side chain of a methyl-substituted cyclohexane (3) a secondary ring cation with an ethyl group at C-4 and a methyl on the cation side (4) a secondary cation next to a quaternary ring carbon with ethyl and methyl groups. Options: (a) 1 (b) 1 and 3 (c) All (d) 1, 2, 4.
Solution. Answer (from key): (c) All. Each cation can move to a more stable one: a secondary cation beside a quaternary carbon rearranges by a 1,2-methyl or alkyl shift to a tertiary cation (1, 4); the cation in (2) has an adjacent tertiary C–H and shifts a hydride to give a tertiary cation; the secondary ring cation in (3) can shift a hydride from a neighbouring tertiary C–H to give a tertiary cation.
Teacher's Note: A cation rearranges whenever a 1,2-H or alkyl shift can give a more stable cation.
Exam Note: Check neighbouring carbons for H or alkyl that yield a tertiary cation.
Question 219. Which of the following carbocations is most likely to undergo a favourable hydride shift? (a) a secondary cyclobutyl-type cation whose neighbouring ring carbon is a tertiary C–H (as drawn) (b) a tertiary-looking cation with a quaternary neighbour (c) a simple secondary open-chain cation (d) a cyclobutylmethyl-type primary cation (as drawn).
Solution. Answer (from key): (a). A hydride shift is favourable when it converts the cation into a more stable one. In (a) the hydride from the adjacent tertiary carbon moves to the cationic carbon, giving a tertiary cation that is also stabilised by the strain-relief environment of the ring. The other options either already have a stable cation (b), have no neighbouring tertiary C–H (c), or prefer ring expansion rather than a hydride shift (d). The structures are as drawn in the book and not redrawn here.
Teacher's Note: Hydride shift needs a neighbouring C–H that gives a more stable cation.
Exam Note: Look for secondary-to-tertiary conversion; skip cations already tertiary.
Question 220. Energy profile diagram for dehydration of 2-butanol using conc. H2SO4 is given below: reactant CH3CH2CH(OH)CH3 goes over the first barrier to the carbocation CH3CH2CH+CH3, which then goes over three different second barriers to products a, b and c (a on the highest energy curve, c on the lowest). Product (b) of the above reaction is: (a) 1-butene (b) cis-2-butene (c) trans-2-butene (d) isobutene.
Solution. Answer (from key): (b) cis-2-butene. The three products from the sec-butyl cation are 1-butene, cis-2-butene and trans-2-butene. Their stability order is trans-2-butene > cis-2-butene > 1-butene. The most stable product (trans) lies lowest on the diagram, the least stable (1-butene) highest, so the middle curve (b) is cis-2-butene. (Isobutene cannot form from a straight-chain cation.)
Teacher's Note: Product stability order: trans-2-butene, cis-2-butene, then 1-butene.
Exam Note: Rank products by stability and match with the diagram.
Question 221. How many alkenes on catalytic hydrogenation give isopentane as a product? (a) 2 (b) 3 (c) 4 (d) 5.
Solution. Answer (from key): (b) 3. Isopentane is 2-methylbutane, (CH3)2CH–CH2–CH3. The alkenes that give it on hydrogenation are 2-methylbut-1-ene, 3-methylbut-1-ene and 2-methylbut-2-ene, so three alkenes (structural isomers; no stereoisomers exist).
Teacher's Note: List every position of C=C in the 2-methylbutane skeleton that is allowed.
Exam Note: Do not count 2,3-dimethyl positions; a quaternary carbon cannot carry C=C.
Question 222. Which of the following carbocations would not rearrange to a more stable form? (a) cyclopentyl cation (b) a primary-type cation H–CH2...CH2+ as drawn (c) cyclopropylcarbinyl-type cation: cyclopropyl ring attached to a cation centre (d) a tertiary-looking cation with an adjacent branched carbon.
Solution. Answer (from key): (c). The cyclopropylmethyl (cyclopropylcarbinyl) cation is unusually stable because the bent C–C bonds of the ring overlap with the empty p orbital (like partial double-bond character). Rearrangement to another cation would not lead to a more stable form. The cations in (a), (b) and (d) can reach a more stable cation by hydride/alkyl shift or ring change.
Teacher's Note: Cyclopropylcarbinyl cations are specially stabilised by ring bonds, so they stay put.
Exam Note: Cation next to cyclopropane is more stable than most tertiary cations.
Question 223. Consider the following reaction: BrCH2CH2F + SbF5 in SO2 at –60 °C gives the bridged bromonium ion CH2–CH2 (with Br+ bridging) + SbF6–. In this reaction SbF5 acts as: (a) an acid (b) a base (c) a nucleophile (d) an electrophile.
Solution. Answer (from key): (d). SbF5 has an empty orbital on antimony and accepts a fluoride ion (an electron pair) from the substrate, forming SbF6–; this makes it an electron-pair acceptor, i.e. a Lewis acid and an electrophile. Loss of F– leaves the cation, which is stabilised as the bridged bromonium ion.
Teacher's Note: SbF5 accepts F– (electron-pair acceptor): Lewis acid, electrophile.
Exam Note: Electron-pair acceptor means electrophile/Lewis acid, not nucleophile.
Question 224. Methylcyclopentane with Br2/hν gives major (X), which with alcoholic KOH / Δ gives major (Y), which with HBr in the presence of peroxide gives major (Z). Product (Z) is: (a) bromocyclohexane (b) 1-bromo-1-methylcyclopentane (c) 2-bromo-1-methylcyclopentane (Br on the ring carbon next to the one carrying CH3) (d) (bromomethyl)cyclopentane.
Solution. Answer (from key): (c). Free-radical bromination is highly selective for the tertiary C–H: (X) = 1-bromo-1-methylcyclopentane. Alcoholic KOH eliminates HBr by Zaitsev rule: (Y) = 1-methylcyclopentene (endocyclic, more substituted). HBr with peroxide adds anti-Markovnikov (radical mechanism): Br goes to the less substituted alkene carbon, C-2, giving 2-bromo-1-methylcyclopentane (Z).
Teacher's Note: Radical Br2 picks 3° C–H; Zaitsev elimination; peroxide HBr puts Br on the less substituted carbon.
Exam Note: Three steps: tertiary bromide, endocyclic alkene, anti-Markovnikov addition.
Question 225. CH3–C≡C–H with NaNH2, then CH3I gives (A); (A) with Li / liq. NH3 gives (B), and with H2, Pd–CaCO3 gives (C). Relation between (B) and (C) is: (a) Enantiomer (b) Diastereomer (c) Geometrical isomer (d) Meso.
Solution. Answer (from key): (b, c). NaNH2 removes the acidic ≡C–H and CH3I alkylates it: (A) = 2-butyne. Li / liq. NH3 gives anti addition: (B) = trans-2-butene. H2 over Pd–CaCO3 (Lindlar-type catalyst) gives syn addition: (C) = cis-2-butene. cis- and trans-2-butene are geometrical isomers, and geometrical isomers are a type of diastereomers (non-mirror-image stereoisomers), so both (b) and (c) are correct.
Teacher's Note: Li/NH3 gives trans; poisoned Pd gives cis; cis/trans pairs are diastereomers.
Exam Note: Geometrical isomers are diastereomers; both options (b) and (c) are accepted.
Question 226. The reaction of HBr with 4-hydroxystilbene (PhCH=CH–C6H4–OH, para-hydroxy on the right-hand ring, as drawn) would produce: (a) Br on the carbon attached to the plain phenyl ring, OH retained (b) Br on the carbon attached to the hydroxyphenyl ring, OH retained (c) both Br on the carbon next to the phenyl ring and Br replacing the aromatic OH (d) Br on a carbon and Br replacing the phenolic OH.
Solution. Answer (from key): (b). H+ adds to the C=C to give the more stable benzylic cation. The cation on the carbon attached to the hydroxyphenyl ring is stabilised additionally by the para-OH group through resonance (+M, giving a quinone-methide-type structure), so H+ goes to the carbon next to the plain phenyl ring and Br– attacks the carbon next to the hydroxyphenyl ring. The phenolic C–OH is not replaced by Br.
Teacher's Note: The cation forms next to the ring carrying the para-OH, which stabilises it by resonance.
Exam Note: Choose the resonance-stabilised cation; phenolic OH stays.
Question 227. Cyclohexene + Br2 gives trans-1,2-dibromocyclohexane, and this is an example of: (a) Nucleophilic addition (b) Nucleophilic substitution (c) Electrophilic addition (d) Electrophilic substitution (e) Free radical substitution.
Solution. Answer (from key): (c). Br2 is polarised by the π electrons of the C=C and acts as an electrophile, forming a cyclic bromonium ion. Bromide then attacks from the opposite face to give the trans-dibromide. Two atoms add across the double bond, so it is electrophilic addition.
Teacher's Note: Electron-rich π bond attacks Br2: electrophilic addition via bromonium ion.
Exam Note: Alkenes undergo electrophilic addition, not nucleophilic addition.
Question 228. Olefins can be hydrogenated by: (a) Zinc and HCl (b) Nascent hydrogen (c) Raney Ni and H2 (d) Lithium hydride in ether.
Solution. Answer (from key): (c). Isolated C=C bonds are reduced by H2 with a metal catalyst (Raney Ni, Pd, Pt). Nascent hydrogen (Zn/HCl) and hydride reagents like LiH or LiAlH4 do not reduce an unactivated C=C because it is not polarised or electron-poor.
Teacher's Note: Catalytic hydrogenation (Ni, Pd, Pt) reduces C=C; hydrides reduce polar C=O.
Exam Note: Know which reagent classes touch C=C: only catalytic H2 here.
Question 229. What are the products obtained on hydroboration–oxidation of the given alkene (an octalin, i.e. a bicyclic decalin ring system with an angular CH3 at the ring junction and the C=C in the right-hand ring next to the junction carbon without CH3, as drawn)? Six possible products (I)–(VI) are drawn as decalin alcohols with the angular CH3 on a wedge and different H/OH stereochemistry at the ring-junction and the ring carbon. Options: (a) I and III (b) II and IV (c) II and VI (d) III and V.
Solution. Answer (from key): (d). Hydroboration–oxidation adds H and OH across the C=C in a syn manner, with OH on the less substituted carbon (anti-Markovnikov). The borane can approach from either face of the alkene, so two diastereomeric alcohols form, in which H at the ring-junction carbon and the OH on the neighbouring carbon are cis. These are the pair III and V in the drawing. The six drawings are not redrawn here; the answer is taken from the key.
Teacher's Note: Syn addition of H and OH; attack from either face gives two diastereomers.
Exam Note: Syn H/OH pairs from both faces: choose the two matching structures.
Level 2
Question 1 (Level 2). Reagents: A. HCl, B. Br2, C. Hg(OAc)2 in H2O, D. B2H6 (BH3) in ether, E. H2O2, F. KMnO4 in H2O, G. HOBr, H. NaBH4. In each reagent box write a letter designating the best reagent and condition selected from the above list. Reactant: (CH3)2CH–CH=CH2 (3-methyl-1-butene). Products: (i) (CH3)2CHCH(Cl)CH3, 2-chloro-3-methylbutane; (ii) (CH3)2CHCHBrCH2Br, 1,2-dibromo-3-methylbutane; (iii) (CH3)2CHCH(OH)CH2Br, 1-bromo-3-methyl-2-butanol; (iv) (CH3)2CHCH(OH)CH3, 3-methyl-2-butanol; (v) (CH3)2CHCH(OH)CH2OH, 3-methyl-1,2-butanediol.
Solution. Answer (from key): (i) A; (ii) B; (iii) G; (iv) C; (v) F. (i) HCl adds Markovnikov to give the secondary chloride (as the key gives it). (ii) Br2 adds across the C=C. (iii) HOBr gives the bromohydrin with Br on the terminal carbon and OH on the internal carbon. (iv) Oxymercuration (Hg(OAc)2/H2O, then reduction) gives the Markovnikov alcohol without the carbocation rearrangement that acid hydration would cause. (v) Cold dilute KMnO4 gives the syn-diol.
Teacher's Note: Match reagent to regiochemistry; oxymercuration avoids rearrangement of the secondary cation.
Exam Note: Choose oxymercuration, not acid hydration, when rearrangement is possible.
Question 2 (Level 2). Propene (CH3–CH=CH2) can be transformed to compounds (a to j) listed in the left-hand column. Write the letter designating the reagent you believe will achieve the desired transformation; in the case of a multi-step sequence write the reagents in the order they are to be used. Reagent list: A. Hg(OAc)2 in H2O; B. B2H6 in THF; C. NaBH4 in alcohol; D. Br2 in CH2Cl2; E. H2O2 in aqueous base; F. HOBr (NBS in aqueous acetone); G. HBr in CH2Cl2; H. OsO4 in ether; I. thionyl chloride (SOCl2); J. NaHSO3 in aqueous acetone; K. NaOH in alcohol and reflux; L. NaNH2 (strong base). Desired products: a. CH3CHBrCH2Br (one step); b. (CH3)2CHOH (two steps); c. CH3CH2CH2OH (two steps); d. CH3COCH3 (three steps); e. CH3CH2CHO (three steps); f. CH3CH(OH)CH2Br (one step); g. (CH3)2CHBr (one step); h (printed 'h, k') CH3CH(OH)CH2OH (two steps); i. CH3CH2CH2Cl (three steps); j. CH3–C≡CH (two steps).
Solution. Answer (from key): a – D; b – A, C; c – B, E; d – A, C, F; e – B, E, F; f – F; g – G; i – B, E, I; j – D, L. Reasoning: a Br2 adds. b Markovnikov hydration by oxymercuration (A) then demercuration (C). c anti-Markovnikov hydration by hydroboration (B) then oxidation (E). d isopropanol from A, C is oxidised by HOBr/NBS (F). e propan-1-ol from B, E is oxidised by HOBr/NBS (F). f HOBr gives the bromohydrin. g HBr Markovnikov. i propan-1-ol (B, E) then SOCl2 (I) gives 1-chloropropane. j Br2 gives the dibromide, then NaNH2 (L) eliminates two HBr. For h the printed key says 'I, K' (SOCl2, NaOH/alcohol), which cannot give a diol. Corrected: h – H, J: OsO4 in ether (syn dihydroxylation) then NaHSO3 in aqueous acetone to cleave the osmate ester, giving propane-1,2-diol (the printed letters I, K look like a one-letter slip for H, J).
Teacher's Note: Chain steps: hydration type, oxidation, halogenation or elimination; recall each reagent's role.
Exam Note: State step order; for diol use OsO4 then NaHSO3.
Question 3 (Level 2). In each reaction box write a single letter designating the best reagent and condition selected from the list (F.S. = first step, S.S. = second step, T.S. = third step). Reagent list: A. NaBH4/alcohol; B. Ph–CO3H/CH2Cl2; C. PCC; D. CH3ONa/CH3OH; E. B2H6 in THF; F. H2O2/aq. NaOH; G. H3PO4 and heat; H. AlCl3/C6H6; I. O3 in CH2Cl2; J. Br2 in CH2Cl2; K. 20% KOH and heat; L. Ph–Li/ether. Reactions: (1) 1-methylcyclohexene (two steps) to 2-methoxy-1-methylcyclohexan-1-ol (tertiary OH on the methyl-bearing carbon, OCH3 on the adjacent carbon); (2) 1-methylcyclohexene (three steps) to 2-methylcyclohexanone; (3) 1-methylcyclohexene (two steps) to heptane-1,6-diol (HOCH2(CH2)4CH(OH)CH3); (4) cyclohexanone (two steps) to 1-phenylcyclohexene; (5) cyclohexene (three steps) to 2-phenylcyclohexanone.
Solution. Answer (from key): Reaction 1: B, D. Reaction 2: E, F, C. Reaction 3: I, A. Reaction 4: L, G. Reaction 5: B, L, C. (1) Peracid gives the epoxide; methoxide opens it at the less hindered carbon, leaving the tertiary OH. (2) Hydroboration–oxidation (E, F) gives trans-2-methylcyclohexanol (anti-Markovnikov, OH on the less substituted carbon) and PCC (C) oxidises it to the ketone. (3) Ozonolysis (I) of the ring alkene gives 6-oxoheptanal; NaBH4 (A) reduces both carbonyls to the diol. (4) PhLi adds to C=O to give the tertiary alcohol; H3PO4/heat dehydrates it to the alkene. (5) Peracid epoxide; PhLi opens it to trans-2-phenylcyclohexanol; PCC oxidises to 2-phenylcyclohexanone.
Teacher's Note: Epoxide opening by a nucleophile at the less hindered carbon; PCC oxidises secondary alcohols to ketones.
Exam Note: Write the reagent order; each step must be consistent with the previous.
Question 4 (Level 2). Match the reagents a–j with products A–J. There is one best product for each reaction. The molecule (x), the starting material for all the reactions, is a chiral allylic bromide of the type CH2=CH–CH(Br)–CH(R)–Ph with defined stereochemistry (drawn in the book). The reagents are: (a) H2O, heat, pH 7; (b) CF3CO3H (trifluoroperacetic acid); (c) t-BuOK, polar aprotic solvent; (d) (1) O3, ether; (2) H2O, NaOH, H2O2; (e) Br2, CCl4; (f) NBS, hν, CCl4; (g) (1) H3O+; (2) NaOH, H2O; (h) (1) BH3, ether; (2) H2O2; (i) (1) OsO4; (2) NaOH, H2O; (j) H2/Pd/C (EtOH). The products A–J are structures drawn in the book (not redrawn here).
Solution. Answer (from key): a – C; b – D; c – A; d – F; e – I; f – J; g – E; h – H; i – B; j – G. Reasoning by reaction type: (a) hot neutral water gives SN1 solvolysis of the allylic bromide: the alcohol (C). (b) The peracid epoxidises the C=C: epoxide with Br retained (D). (c) A bulky base gives E2 elimination of HBr: the conjugated diene (A). (d) Ozonolysis with oxidative work-up gives the carboxylic acid (F). (e) Br2 adds across C=C: the vicinal dibromide (I). (f) NBS/hν gives allylic bromination: a dibromide (J). (g) H3O+ hydrates the C=C to a bromohydrin-type alcohol, and NaOH then closes it to the epoxide (E). (h) Hydroboration–oxidation gives the primary alcohol (H). (i) OsO4 then base/water gives the syn diol (B). (j) H2/Pd/C saturates the C=C: the saturated bromide (G). The drawn structures were not redrawn; the matching is as printed in the key and the reasoning is by reaction type.
Teacher's Note: Identify each reaction type first: substitution, elimination, addition, oxidation; then match the product drawing.
Exam Note: Match by reaction type; stereochemistry decides between close drawings.
Question 5 (Level 2). Match the column: Column I: (a) CH3–C≡C–CH3; (b) CH3CH2–C≡CH; (c) CH3–C≡CH; (d) CH3–C≡C–Et. Column II: (p) cis-product with H2/Pd–BaSO4; (q) trans-product with Na/liq. NH3; (r) white precipitate with ammoniacal AgNO3; (s) H2 gas with Na.
Solution. Answer (from key): a – p, q; b – r, s; c – r, s; d – p, q. Internal alkynes (2-butyne and 2-hexyne, CH3–C≡C–Et) are reduced to the cis-alkene by H2 over poisoned Pd–BaSO4 and to the trans-alkene by Na/liq. NH3. Terminal alkynes (1-butyne and propyne) have an acidic ≡C–H, so they give a white silver acetylide precipitate with ammoniacal AgNO3 and liberate H2 with sodium.
Teacher's Note: Terminal alkynes have acidic H (Ag+, Na tests); internal alkynes only reduce to cis or trans alkenes.
Exam Note: Terminal versus internal alkyne decides the tests.
Question 6 (Level 2). Match column I with column II and with column III (matrix). Column I (reaction with Br2 in CCl4): (a) 3-methylcyclopentene with the stereocentre drawn (CH3 wedge, H hashed, next to the C=C); (b) 4-methylcyclopentene with the CH3/H stereo-drawing at C-4; (c) 4-methylcyclopentene, CH3 drawn plain; (d) trans-2-butene. Column II (nature of product formed): (p) racemic mixture; (q) meso; (r) diastereomer; (s) vicinal dihalide. Column III (number of chiral centres in product; consider only one isomer in case of racemic mixture or diastereomer): (w) 0; (x) 1; (y) 2; (z) 3.
Solution. Answer (from key): a – r, s – z; b – p, s – y; c – p, s – y; d – q, s – y. (a) The substrate already has a stereocentre; anti addition of Br2 creates two more, so the products are diastereomers (r), a vicinal dibromide (s), with 3 chiral centres (z). (b) and (c) 4-Methylcyclopentene is symmetric, so anti addition gives a racemic mixture of trans-1,2-dibromo-4-methylcyclopentane (p), a vicinal dibromide (s) with 2 chiral centres (y), the ring carbon bearing CH3 not being counted as in the key. (d) Anti addition of Br2 to trans-2-butene gives meso-2,3-dibromobutane (q), a vicinal dibromide (s) with 2 chiral centres (y).
Teacher's Note: Existing stereocentre gives diastereomers; achiral alkene gives racemate; trans-2-butene gives meso.
Exam Note: Count stereocentres in the product; anti addition fixes relative configuration.
Question 7 (Level 2). Match column I and II. Column I (reaction of a cyclohexene with two trans-oriented substituents drawn as hashed bonds at C-4 and a vertical C=C): (a) (1) OsO4; (2) NaOH, H2O; (b) (1) BH3/ether; (2) H2O2, NaOH, H2O; (c) Cl2, H2O; (d) Cl2/CCl4. Column II (products): (p) the cyclohexanol (a single OH on the ring carbon); (q) a chlorohydrin (Cl and OH on adjacent carbons); (r) a vicinal diol; (s) a vicinal dichloride.
Solution. Answer (from key): a – r; b – p; c – q; d – s. (a) OsO4 with base/water gives the syn-1,2-diol (r). (b) Hydroboration–oxidation gives the alcohol, OH on the less substituted carbon (p). (c) Cl2 with water gives the chlorohydrin by anti addition (q). (d) Cl2 in CCl4 gives the anti vicinal dichloride (s).
Teacher's Note: Reagent determines the functional group added: diol, alcohol, chlorohydrin, or dihalide.
Exam Note: Solvent water means halohydrin; CCl4 means dihalide.
Question 8 (Level 2). (1) 5-(hydroxymethyl)cyclopenta-1,3-diene (a cyclopentadiene ring bearing CH2–OH) with H+, Δ gives (A); (2) cyclobutene bearing two CH2OH groups (HOCH2 on the two sp3 ring carbons) with H+, Δ gives (B); (3) cyclopropane bearing three CH2OH groups with H+, Δ gives (C); (4) cyclohexa-2,5-dien-1-ol with H+, Δ gives (D). Sum of molecular mass of A, B, C, D (i.e. A + B + C + D) is equal to:
Solution. Answer (from key): 312. Each substrate loses all its OH groups as water under acid and heat and ends up with the formula C6H6: (1) C6H8O – H2O = C6H6 (fulvene); (2) C6H10O2 – 2 H2O = C6H6 (benzene via ring expansion/rearrangement); (3) C6H12O3 – 3 H2O = C6H6 (benzene); (4) C6H8O – H2O = C6H6 (benzene). Each has molecular mass 78 (C6H6 = 6 × 12 + 6 × 1), so 4 × 78 = 312.
Teacher's Note: Count atoms: each substrate minus its waters is C6H6, mass 78.
Exam Note: Sum of four products = 4 × 78 = 312.
Question 9 (Level 2). (1) C2FClBrI (all isomers) on H2/Ni gives (A) (exclude stereoisomers); (2) C4H8 (alkene, all isomers) on H2/Ni gives (B) (exclude stereoisomers). Total number of products A and B (i.e. A + B) is equal to:
Solution. Answer (from key): 5. (1) C2FClBrI is a fully substituted haloethene X2C=CY2-type with four different halogens; excluding geometrical isomers, there are 3 structural isomers (CFCl=CBrI, CFBr=CClI, CFI=CBrCl), and each hydrogenates to a different saturated product (CHFCl–CHBrI, CHFBr–CHClI, CHFI–CHBrCl): A = 3. (2) C4H8 alkenes (but-1-ene, but-2-ene, isobutene) give only 2 distinct alkanes, butane and isobutane: B = 2. A + B = 3 + 2 = 5.
Teacher's Note: Hydrogenation removes the C=C; count distinct alkanes, not alkene isomers.
Exam Note: Isomeric alkenes can give the same alkane; count carefully.
Question 10 (Level 2). Sum of products P, Q, R, S (i.e. P + Q + R + S). Reaction 1: the cis-alkene CH3CHBr–CH=CH–CHBrCH3 (Fischer drawings of both ends with H on the left and Br on the right; cis) + Br2/CCl4 gives (P). Reaction 2: the same compound, trans, gives (Q). Reaction 3: the cis-alkene CH3CHBr–CH=CH–CH3 (one stereocentre) gives (R). Reaction 4: the trans isomer gives (S). P, Q, R, S are the numbers of products formed.
Solution. Answer (from key): 8. Br2 adds anti to give 2,3,4,5-tetrabromohexane derivatives. In each case count the distinct stereoisomeric products. Reactions 3 and 4 have one existing stereocentre, so the two faces of the alkene are diastereotopic and two diastereomers form each: R = 2, S = 2. In reactions 1 and 2 the two end groups are mirror images (an R,S, meso-type substrate). For the cis substrate the molecule has a mirror plane and the two anti-addition outcomes are mirror images, so 2 products (an enantiomeric pair): P = 2; for the trans substrate the two outcomes are distinct diastereomers: Q = 2. P + Q + R + S = 2 + 2 + 2 + 2 = 8.
Teacher's Note: Count anti-addition outcomes; an existing stereocentre or symmetry decides if products differ.
Exam Note: Each reaction gives two stereo-products; add them up.
Question 11 (Level 2). Comprehension. Vladimir Markovnikov rule: alkenes undergo electrophilic addition reactions, triggered by the acid acting as an electrophile toward the π electrons of the double bond. Markovnikov's rule states that when an unsymmetrically substituted alkene reacts with a hydrogen halide, the hydrogen adds to the carbon that has the greater number of hydrogens. Example: 1-methylcyclopentene + HCl at 0 °C gives 1-chloro-1-methylcyclopentane. Mechanism: Step 1: protonation of the C=C gives the tertiary carbocation (rate-determining, r.d.s.) with Cl–; Step 2: Cl– attacks the cation (fast). Questions A to F follow.
A. Which of the following is most reactive toward Markovnikov addition? Four rings (a)–(d): (a) a six-membered ring with an O atom and a C=C two atoms away from O; (b) a six-membered ring with O and the C=C adjacent to O (3,4-dihydro-2H-pyran, an enol ether); (c) 1-methylcyclohexene-type ring (trisubstituted C=C); (d) a cyclohexylidene-type tetrasubstituted alkene.
B. What is the energy profile for the given reaction? Four profiles (a)–(d), each showing two peaks; (c) is the profile whose first barrier is the larger one (rate-determining), whose intermediate (carbocation) lies in a shallow well above the reactant energy, and whose second barrier is small, ending at the lowest product energy.
C. In which of the following reactions is carbocation rearrangement possible? (a) (CH3)2CH–CH=CH2 with HCl at 0 °C; (b) (CH3)3C–CH=CH2 with HBr at 0 °C/CCl4; (c) Ph–CH2–CH=CH2 with HBr in CCl4; (d) All of these.
D. Identify the major products r1, r2 and r3 from 1-methylcyclohexene with HBr/H2O, HBr/CH3OH and HBr/D2O respectively. (a) r1 = 1-methylcyclohexanol (OH), r2 = OD compound, r3 = OCH3 compound (b) r1 = OH, r2 = OCH3, r3 = OD (c) 1-bromo-1-methylcyclohexane in all the reactions (d) 1-methylcyclohexanol in all the reactions.
E. In which of the following reactions is the product a racemic mixture? (a) CH3CH2CH=CH2 + HBr/CCl4 (b) trans-2-butene + HBr/CCl4 (c) cis-2-butene + HBr/CCl4 (d) All of these.
F. In which of the following reactions will diastereomers be formed? (a) 2-methyl-1-methylenecyclohexane-type alkene (ring carbon with CH3 drawn on a wedge next to a C(=CH2) ring carbon) + HBr/CCl4 (b) a Fischer-drawn compound with CH3, H, D on one stereocentre and CH=CH–Ph (phenyl-substituted alkene) + HBr/CCl4 (c) 3-bromocyclohexene + HBr/CCl4 (d) All of these.
Solution. Answer (from key): A – (b); B – (c); C – (d); D – (b); E – (d); F – (d). A: The enol ether (b) forms an oxocarbenium ion, in which O lone-pair donation stabilises the cation strongly, so it is the most reactive. B: The rate-determining first step has the larger barrier and gives the carbocation intermediate (higher in energy than the reactants); the second step is fast with a small barrier, and the overall reaction is exothermic: profile (c). C: A secondary cation in (a) shifts a hydride to the tertiary cation, in (b) shifts a methyl group to the tertiary cation, and in (c) shifts a hydride to the benzylic cation, so rearrangement is possible in all. D: The tertiary cation is trapped by the solvent: H2O gives OH (r1), CH3OH gives OCH3 (r2), D2O gives OD (r3); (b). E: Each reaction gives 2-bromobutane, whose single new stereocentre forms from a planar cation, so a racemic mixture in every case. F: In (a), (b) and (c) a new stereocentre is created in a molecule that already has one, giving diastereomers.
Teacher's Note: Rate-determining protonation gives cation; solvent traps it; check shifts and chiral centres.
Exam Note: Cation stability and solvent trapping decide the product; chirality gives racemate.
Question 12 (Level 2). Comprehension. Consider the reaction CH3CH2CH=CH2 + CH3OH with H+ giving CH3CH2CH(OCH3)CH3, and answer A to E. A. What is the electrophile in the first step? (a) CH3+ (b) H+ (c) CH3CH2CH+CH3 (d) HO+. B. What is the nucleophile in the first step? (a) CH3OH (b) 1-butene (c) H2O (d) CH3–O–CH3. C. What is the electrophile in the second step? (a) CH3+ (b) H+ (c) CH3CH2CH+CH3 (d) CH3CH2CH2CH2+. D. What is the nucleophile in the second step? (a) CH3CH2CH=CH2 (b) CH3OH (c) H2O (d) CH3–O–CH3. E. Which step is rate determining? (a) attack of nucleophile CH3OH (b) attack of electrophile H+ (c) attack of nucleophile H2O (d) attack of electrophile CH3+.
Solution. Answer (from key): A – (b); B – (b); C – (c); D – (b); E – (b). Step 1: the π bond of 1-butene (nucleophile) attacks H+ (electrophile), forming the secondary carbocation CH3CH2CH+CH3 (Markovnikov). Step 2: this carbocation (electrophile) is attacked by CH3OH (nucleophile) to give the protonated ether, which loses H+ to give 2-methoxybutane. The first step, protonation of the alkene to give the carbocation, is slow and rate determining.
Teacher's Note: Alkene is the nucleophile in step 1; the carbocation is the electrophile in step 2.
Exam Note: Rate-determining step is protonation forming the carbocation.
Question 13 (Level 2). Match the column I and II: Column I (conversions of 4-cyclopentyltoluene, a toluene ring bearing a cyclopentyl group para to CH3): (a) CH3 becomes CH2Br and the tertiary ring C–H of the cyclopentyl group becomes C–Br; (b) CH3 becomes CH2Cl and the cyclopentyl C–H becomes C–Cl; (c) CH3 becomes CH2Br and the cyclopentyl carbon gets Cl; (d) CH3 becomes CH2Cl and the cyclopentyl carbon gets Br. Column II (reagent): (p) SO2Cl2/hν (2 equivalent); (q) NBS (2 equivalent); (r) NBS then SO2Cl2/hν; (s) SO2Cl2/hν then NBS.
Solution. Answer (from key): a – q; b – p; c – s; d – r. Both benzylic positions (the CH3 and the tertiary cyclopentyl C–H) react by a radical substitution at a benzylic C–H. With 2 equivalents of one reagent, both positions get the same halogen: NBS gives dibromo (a – q), SO2Cl2/hν gives dichloro (b – p). To get different halogens, use two reagents in sequence; the first halogen goes onto the more reactive tertiary benzylic C–H and the second onto the CH3. So SO2Cl2 first then NBS gives Cl on the ring carbon and Br on the CH3 (c – s), while NBS first then SO2Cl2 gives Br on the ring carbon and Cl on the CH3 (d – r).
Teacher's Note: Tertiary benzylic C–H reacts first; the order of reagents decides which halogen sits where.
Exam Note: Two equal reagents give identical halogens; sequence gives mixed halides.
Step-by-Step MS Chauhan Solutions for JEE Math
Download MS Chauhan Solutions for JEE
Review detailed solutions for JEE Mathematics. The MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 4 b Hydrocarbons Alkanes Part 2 PDF provides comprehensive answers mapped to standard MS Chauhan Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Mastering Core Concepts with MS Chauhan Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Additional Study Materials for 2026
In addition to these MS Chauhan Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.