MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 4 b Hydrocarbons Alkanes Part 1

MS Chauhan Solutions for JEE Chemistry: Chapter 04 b Hydrocarbons Alkanes

Review structured textbook solutions for JEE Chemistry Chapter 04 b Hydrocarbons Alkanes prepared by MS Chauhan. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice JEE Chemistry Solutions: Chapter 04 b Hydrocarbons Alkanes

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chapter 4B Hydrocarbons (Alkenes) - Level 1, Questions 1 to 157

Level 1

Question 1. (R)-3-Bromocyclopentene reacts with Br2/CCl4 to form two products, Y and Z. Y is not optically active (does not rotate plane-polarised light). What is the structure of Y? [Options (a)-(e) are drawn 1,2,3-tribromocyclopentane stereoisomers using wedge/hash bonds.]

Solution. Answer (from key): (c). Br2 adds anti across the C=C, so the new Br atoms at C1 and C2 are trans. Of the two products, the one with the C1 and C3 bromines on the same face and the C2 bromine on the opposite face has a mirror plane through C2, so it is meso and optically inactive. That is Y, drawn as option (c); Z is the chiral diastereomer.

Teacher's Note: Anti addition gives trans-1,2 Br; a mirror plane through C2 makes the meso isomer inactive.

Exam Note: Identify the meso isomer to earn the mark.

Question 2. A + 2HCl → (a decalin-type dichloride: Cl on a ring carbon bearing a methyl group, and a C(CH3)2Cl side chain). Reactant (A) can be: (a) the diene with an exocyclic C=CH2 on the ring and an isopropenyl side chain; (b) the ring alkene with a C(CH3)2OH side chain; (c) the ring tertiary alcohol with an isopropenyl side chain; (d) All of these.

Solution. Answer (from key): (d). HCl adds to each C=C by Markovnikov addition, giving the tertiary chloride. A tertiary alcohol is converted to the tertiary chloride by HCl through the same tertiary carbocation. Each of (a), (b) and (c) therefore uses its two reactive sites to give the same dichloride, so all three are correct.

Teacher's Note: Alkene + HCl and tertiary alcohol + HCl both pass through a tertiary carbocation to the same chloride.

Exam Note: Check every candidate before choosing 'All of these'.

Question 3. A cyclopentane ring bearing a methyl group and a C=CH2 (isopropenyl-type) unit is treated with HCl. The major product is: (a) ring-CMe2Cl type chloride; (b) 1-chloro-1-methylcyclopentane type chloride; (c) ring-expanded chlorocyclohexane; (d) a second chlorocyclohexane isomer. [Options are drawn structures.]

Solution. Answer (from key): (c). Protonation of the C=CH2 unit gives a carbocation next to the strained five-membered ring. A ring-expansion (alkyl shift) converts the five-membered ring into a six-membered ring and forms a stable tertiary carbocation, which is captured by Cl−. The product is therefore the ring-expanded tertiary chloride, option (c).

Teacher's Note: Carbocation next to a cyclopentane: ring expansion to a stable cyclohexyl tertiary cation.

Exam Note: Name the shift: ring expansion to a tertiary cation.

Question 4. Which of the following products cannot be obtained in ozonolysis (O3, then Zn) of o-xylene? (a) OHC–CHO; (b) CH3–CO–CHO; (c) CH3–CO–CO–CH3; (d) CH3–CO–CO–CHO.

Solution. Answer (from key): (d). o-Xylene reacts as its two Kekulé forms. One form cleaves to glyoxal (a) and biacetyl (c) in a 1:1 ratio, and the other cleaves to two methylglyoxal (b). The three-carbonyl compound CH3COCOCHO needs three adjacent carbons that are not present in that pattern, so it cannot form.

Teacher's Note: Use both Kekulé structures: glyoxal, methylglyoxal and biacetyl form; not a tricarbonyl.

Exam Note: Write both Kekulé forms to list possible products.

Question 5. A spiro dienone (cyclopentane spiro-fused to a cyclohexa-2,5-dien-4-one) is treated with H+. The major product is: (a) a tetrahydronaphthol with OH next to the ring fusion; (b) a tetrahydronaphthol with OH at the far (2-) position; (c) a 4-cyclopentylphenol; (d) a 3-cyclopentylphenol. [Options are drawn structures.]

Solution. Answer (from key): (b). This is a dienone–phenol rearrangement. Protonating the C=O gives a cation, a ring carbon of the cyclopentane migrates to the adjacent ring carbon, and loss of H+ aromatises the ring. The result is the fused tetrahydronaphthalene with the OH on the far ring position, option (b).

Teacher's Note: Dienone-phenol rearrangement: 1,2-alkyl shift, then aromatisation drives the reaction.

Exam Note: Name the rearrangement and show the 1,2-shift.

Question 6. KO2C–CH2–CH2–CO2K →(electrolysis) (A) (major) (Kolbe electrolysis). Product (A) is: (a) CH3–CH3; (b) CH2=CH2; (c) CH3–CH=CH2; (d) none of these.

Solution. Answer (from key): (b). Kolbe electrolysis of the dipotassium salt of a dicarboxylic acid (succinate) loses two CO2 and forms a C=C bond: KO2CCH2CH2CO2K → CH2=CH2 + 2CO2.

Teacher's Note: Succinate salt: decarboxylation at both ends links radicals into a double bond.

Exam Note: Remember: dicarboxylate salt gives an alkene.

Question 7. Bicyclopentylidene (two cyclopentane rings joined by C=C) →(O3, Zn) A →(H2/Ni or LiAlH4) B →(H+, Δ) (C). Product (C) is: (a) cyclopentanol; (b) cyclopentanone; (c) cyclopentene; (d) vinylidene-type cyclopentane.

Solution. Answer (from key): (c). Ozonolysis cleaves the C=C to give 2 cyclopentanone (A). H2/Ni or LiAlH4 reduces it to cyclopentanol (B). Acid and heat dehydrate cyclopentanol to cyclopentene (C).

Teacher's Note: Ozonolysis, reduction, dehydration: ketone to alcohol to alkene.

Exam Note: Write A, B and C stepwise.

Question 8. An alkene bearing a remote hydroxyl group (a chain with a terminal 1,1-disubstituted C=C and a terminal OH) reacts with Br2 in CH2Cl2 to give W. Product W is: (a) a bromoalkenol; (b) a vicinal dibromoalcohol; (c) a bromomethyl cyclic ether (tetrahydropyran ring); (d) another dibromo alcohol. [Options are drawn structures.]

Solution. Answer (from key): (c). Br2 forms a bromonium ion. The internal OH attacks the more substituted carbon of the bromonium ion intramolecularly (halo-etherification), forming the six-membered cyclic ether with a CH2Br group.

Teacher's Note: Intramolecular OH traps the bromonium ion: halo-etherification gives a ring.

Exam Note: Choose the cyclic ether when OH is internal.

Question 9. The reaction of propene with H3O+ will proceed with which of the following intermediates? (a) CH3–CH2–CH2–O+H2; (b) CH3–CH+–CH2OH; (c) CH3–CH(O+H2)–CH3; (d) CH3–CH(OH)–CH3.

Solution. Answer (from key): (c). Acid-catalysed hydration follows Markovnikov addition: H+ adds to give the secondary carbocation CH3CH+CH3, water attacks it, and the intermediate is the protonated alcohol CH3CH(O+H2)CH3; loss of H+ gives propan-2-ol.

Teacher's Note: Protonation gives the 2° cation; water attack gives the protonated alcohol intermediate.

Exam Note: Show cation, then oxonium ion, then alcohol.

Question 10. Which of the following bromides is the major product of the reaction of the tricyclic diene (a C13H16 polycyclic with two C=C) with 1 equivalent of HBr, assuming no carbocation rearrangement, to give C13H17Br? [Options (a)-(d) are drawn structures.]

Solution. Answer (from key): (c). HBr adds to the more reactive C=C by Markovnikov addition. H+ goes to the carbon that gives the more stable carbocation (the tertiary, or more highly stabilised, one) and Br− bonds there. Option (c) has Br on that carbon.

Teacher's Note: Markovnikov: H adds to give the more stable carbocation; Br ends on that carbon.

Exam Note: Justify using the more stable carbocation.

Question 11. Which of the following reactions results in the formation of a pair of diastereomers? (a) a chiral alkyne-type substrate with HBr; (b) a chiral terminal alkene (stereocentre with CH3 and H) with HBr; (c) the same alkene with HBr, ROOR, UV; (d) the same alkene with 1. BH3, THF; 2. H2O2, OH−, H2O.

Solution. Answer (from key): (b). HBr adds to the terminal alkene by Markovnikov addition and creates a new stereocentre next to the existing one, giving two diastereomers. With ROOR the Br goes to the terminal carbon (anti-Markovnikov) and hydroboration gives the primary alcohol, so no new stereocentre forms in (c) and (d).

Teacher's Note: A new stereocentre beside an existing one gives diastereomers; terminal addition does not.

Exam Note: Count new stereocentres formed.

Question 12. What is a likely product of the reaction of 1,6-dimethylcyclohexene (a chiral cyclohexene with a CH3 stereocentre) with Br2/CH3OH? [Options (a)-(d) are drawn bromo methyl ethers with wedge/hash bonds.]

Solution. Answer (from key): (d). Br2 forms a bromonium ion and CH3OH, the solvent, attacks it from the opposite face at the more substituted carbon. The product has Br and OCH3 trans (anti addition), with OCH3 on the tertiary carbon, as drawn in option (d).

Teacher's Note: Solvent opens the bromonium ion anti, at the more substituted carbon.

Exam Note: Show trans Br/OMe and OMe on the tertiary carbon.

Question 13. Which of the following, when undergoing addition of HBr, will form ONLY a pair of diastereomers? (a) methylenecyclohexane-type alkene; (b) a chloro-substituted chiral alkene; (c) a chiral hydroxy alkene; (d) a chiral diene. [Options are drawn structures.]

Solution. Answer (from key): (c). The substrate in (c) already has a stereocentre and the HBr addition creates exactly one new stereocentre, so only two diastereomers form (no enantiomeric or constitutional mixture).

Teacher's Note: One existing stereocentre plus one new one gives exactly two diastereomers.

Exam Note: Count stereocentres before and after.

Question 14. How many transition states and intermediates will be formed during the following reaction (vinylcyclobutane + H2O, H+ → 1-methylcyclopentan-1-ol)? (a) 3 transition states and 3 intermediates; (b) 4 transition states and 3 intermediates; (c) 3 transition states and 2 intermediates; (d) 5 transition states and 4 intermediates.

Solution. Answer (from key): (b). Step 1: protonation of the C=C (TS1) gives the secondary cyclobutylcarbinyl cation (intermediate 1). Step 2: ring expansion (TS2) gives the tertiary cyclopentyl cation (intermediate 2). Step 3: attack by water (TS3) gives the oxonium ion (intermediate 3). Step 4: loss of H+ (TS4) gives the alcohol. That is 4 transition states and 3 intermediates.

Teacher's Note: Count each step: four steps give four transition states and three intermediates.

Exam Note: Draw all four steps to count correctly.

Question 15. Product of which of the following reactions is a racemic mixture? (a) 1,4-dimethyl-cyclohexene type alkene + H2/Pt; (b) 1,2-dimethylcyclopentene + Br2/CCl4; (c) a chiral dimethylcyclohexene + H2/Pd; (d) a chiral dimethylcyclopentene + Br2/CCl4.

Solution. Answer (from key): (b). Br2 adds anti to the achiral 1,2-dimethylcyclopentene from either face with equal probability, giving the pair of trans-1,2-dibromo-1,2-dimethylcyclopentane enantiomers, a racemic mixture. The other substrates already contain a stereocentre or give a single compound.

Teacher's Note: Anti addition to an achiral alkene from both faces gives the racemate.

Exam Note: State: achiral alkene, two faces, equal enantiomers.

Question 16. The product(s) of the following reaction (a methyl-substituted cyclohexene with a stereocentre, + HBr) can best be described as: (a) a racemic mixture; (b) a single enantiomer; (c) a pair of diastereomers; (d) an achiral molecule.

Solution. Answer (from key): (c). The existing stereocentre is unaffected and HBr addition creates a new stereocentre, so the products are diastereomers of each other (a pair of diastereomers).

Teacher's Note: Existing stereocentre retained, new one formed: diastereomers, not enantiomers.

Exam Note: Name the product relationship precisely.

Question 17. Taking into account the stability of various carbocations and the rules governing mechanisms of carbocation rearrangements, which reaction is most likely to occur during the given reaction: cyclopropyl–CH=CH2 + HBr? (a) ring expansion to a cyclobutyl cation then Br−; (b) ring expansion to a cyclopentyl cation; (c) a second cyclopentyl bromide route; (d) None.

Solution. Answer (from key): (d). Protonation of the vinyl group gives a secondary cyclopropylcarbinyl cation, which is unusually stable because of the cyclopropyl ring. It captures Br− directly to give cyclopropyl–CHBr–CH3, so none of the ring-expansion routes shown is favourable.

Teacher's Note: The cyclopropylcarbinyl cation is already stabilised, so no rearrangement is needed.

Exam Note: Reject ring expansion when the cation is already stable.

Question 18. Consider the following reaction (1-butene-type alkene → trans-2-butene with H+) in which the intermediate carbocation loses H+ to give the final product. Which of the following energy profiles best represents the overall reaction? [Options (a)-(d) are drawn energy profiles.]

Solution. Answer (from key): (d). The reaction has two steps (protonation to a carbocation, then loss of H+), so the profile has two peaks with a valley (the carbocation intermediate) between them. The first peak is higher because protonation is rate determining, and the product (the more substituted alkene) is lower in energy than the reactant. Profile (d) shows this.

Teacher's Note: Two steps mean two peaks; the product is more stable, so it ends lower.

Exam Note: Draw two humps with the first higher.

Question 19. Methyl vinyl ether, H2C=CH–OCH3, reacts with Br2/CH3OH. If methanol is reacting as water would, and if this reaction follows a typical mechanism of electrophilic addition, what would be the expected product? (a) BrCH2–CH(OCH3)2; (b) a bromo ether with Br on the other carbon; (c) a Br-bearing acetal-type isomer; (d) BrCH2–CO–OCH3-type ester.

Solution. Answer (from key): (a). Br+ adds to the CH2 carbon, and the OCH3 lone pair stabilises the positive charge on the other carbon (an oxocarbenium ion). CH3OH attacks that carbon, and loss of H+ gives the acetal BrCH2–CH(OCH3)2.

Teacher's Note: The O lone pair stabilises the cation on the O-bearing carbon, so methanol adds there.

Exam Note: Br on CH2, two OMe on the other carbon.

Question 20. 2,4-Hexadiyne (C6H6) is allowed to react with Li in NH3(liq). The product obtained is treated with 1 equivalent of Cl2 in CCl4. Which of the following constitutional isomers (I)-(V) are possible products? (a) I and II; (b) II and III; (c) I and V; (d) I and III.

Solution. Answer (from key): (d). Li/NH3 reduces both triple bonds to trans, giving (E,E)-hexa-2,4-diene. One equivalent of Cl2 then adds by 1,2-addition (across one C=C) and by 1,4-addition (2,5-dichlorohex-3-ene). The two constitutional isomers are therefore the 1,2- and 1,4-adducts, structures I and III.

Teacher's Note: Conjugated diene plus Cl2 gives both 1,2- and 1,4-adducts (two constitutional isomers).

Exam Note: Give both the 1,2- and the 1,4-product.

Question 21. Which of the following is the best stereochemical representation when reaction occurs between 1-methylcyclohexene and NBS in aqueous dimethyl sulfoxide? (a) an allylic bromide; (b) the trans bromohydrin with OH and CH3 on one carbon and Br on the adjacent carbon on the opposite face; (c) the other drawn stereoisomer; (d) None of these.

Solution. Answer (from key): (b). NBS in aqueous DMSO acts as a source of Br+ (not allylic bromination). The bromonium ion is opened by water at the more substituted carbon from the opposite face, giving the trans bromohydrin with OH on the carbon that bears CH3, as drawn in (b).

Teacher's Note: NBS/H2O/DMSO gives an anti bromohydrin, with OH on the more substituted carbon.

Exam Note: Distinguish this from allylic bromination (NBS/CCl4).

Question 22. Which of the following is among the major products of the reaction of (E)-3-methyl-2-pentene with BH3 in THF followed by H2O2/HO−? [Options (a)-(d) are Newman projections of 3-methylpentan-2-ol stereoisomers.]

Solution. Answer (from key): (a). Hydroboration-oxidation adds H and OH syn across the double bond with OH on the less hindered carbon (C-2), giving 3-methylpentan-2-ol with retention of configuration at the carbon bearing OH. The syn H/OH addition to the E alkene gives one specific pair of enantiomers, shown in Newman projection (a).

Teacher's Note: Hydroboration-oxidation is a syn addition; the alkene geometry fixes the diastereomer.

Exam Note: Syn H/OH addition decides the stereochemistry.

Question 23. Compare the rate of dehydration of (i), (ii) and (iii) (three hydroxy-dihydronaphthalene alcohols: a benzylic/allylic type alcohol (i), (ii) and (iii)) by conc. H2SO4. (a) (i) > (iii) > (ii); (b) (i) > (ii) > (iii); (c) (ii) > (i) > (iii); (d) (ii) > (iii) > (i).

Solution. Answer (from key): (a). Dehydration is an E1 reaction through a carbocation, so the faster alcohol is the one giving the more stabilised cation. The order given by the book is (i) > (iii) > (ii), the order of decreasing stability (resonance with the benzene ring and the double bond) of the cations formed.

Teacher's Note: E1 rate follows carbocation stability; benzylic and allylic resonance matters most.

Exam Note: Rank by cation stability, then state the order.

Question 24. How many products will be formed in this reaction (a chiral bicyclic alkene, a decalin-type ring alkene with two fixed stereocentres, + 1. OsO4, 2. NaHSO3)? (a) 10; (b) 2; (c) 3; (d) 4.

Solution. Answer (from key): (b). OsO4 adds two OH groups syn to the double bond. The syn addition can occur on either face of the C=C, and because the molecule already has stereocentres the two faces are not equivalent, so two diastereomeric diols form.

Teacher's Note: Syn dihydroxylation from two inequivalent faces gives two diastereomers.

Exam Note: Count faces of attack: two.

Question 25. (Allene: CH3–CH=C=CH–C(CH3)2CH2OH, with stereochemical drawing) + Br2/CCl4 → (A). Product (A) is: [Options (a)-(d) are drawn bromo-dihydropyrans/tetrahydropyrans.]

Solution. Answer (from key): (b). Br+ attacks the allene, and the internal CH2OH group closes onto the cation, forming a six-membered cyclic ether (a dihydropyran) that retains one C=C and one Br, as drawn in (b).

Teacher's Note: Br+ adds to the allene; the OH closes the ring to a dihydropyran.

Exam Note: Intramolecular OH capture gives the ring.

Question 26. CH3–CH(CH3)–H (isobutane) + H2C=CH2 →(HF, 2-5°C) (A); (A) is: (a) tert-butylethene-type alkene; (b) a tetra-substituted C=C alkene (as drawn); (c) a tri-substituted alkene (H on one carbon); (d) (CH3)2CH–CH2–CH=CH2.

Solution. Answer (from key): (b). The key gives (b). (Note: the usual alkylation of isobutane with ethene in HF gives the saturated 2,3-dimethylbutane/2,2-dimethylbutane; option (b) is the alkene drawn in the book. Please check this item.)

Teacher's Note: Alkylation in HF joins isobutane and ethene through carbocations.

Exam Note: Know isobutane-alkene alkylation under HF.

Question 27. Predict the product (A) of the following reaction: isopropylidene-type exocyclic alkene on a cyclopentane ring (cyclopentylidene-CH3 type) ⇄ A with H+, Δ. [Options (a)-(d) are drawn cyclohexene/methylenecyclohexane structures.]

Solution. Answer (from key): (d). Protonation of the exocyclic C=C gives a cation next to the five-membered ring. A ring-expansion shift gives a six-membered ring with a tertiary cation, and loss of H+ gives the most substituted (tetra-substituted) alkene, a 1,2-dialkylcyclohexene, as in option (d).

Teacher's Note: Ring expansion then Saytzeff elimination gives the most stable tetra-substituted alkene.

Exam Note: Show ring expansion, then loss of H+.

Question 28. A cycloalkyl-CH2-CH(OH)-type alcohol (cycloalkyl chain with a secondary OH) on treatment with H+, Δ gives the major product (A). [Options (a)-(d) are drawn alkenes.] Major product (A) is:

Solution. Answer (from key): (b). Acid-catalysed dehydration is E1: the secondary cation rearranges by a ring/hydride shift to a more stable cation and loses H+ to give the most substituted (Saytzeff) alkene. The book gives (b).

Teacher's Note: E1 dehydration: possible shift to a stable cation, then the most substituted alkene.

Exam Note: Apply the Saytzeff rule after any rearrangement.

Question 29. Di-imide (N2H2) is used to reduce the double bond of: (a) –C=O; (b) –C≡N; (c) –NO2; (d) –CH=CH–.

Solution. Answer (from key): (d). Di-imide (HN=NH) transfers two hydrogens syn to non-polar C=C and C≡C bonds and does not reduce polar C=O, C≡N or NO2 groups.

Teacher's Note: Di-imide reduces only non-polar C=C or C≡C bonds, with syn addition.

Exam Note: Remember: selective for symmetrical C=C.

Question 30. Cyclopentadiene-type ring (a cyclopentene ring with a second C=C) →(HCl) (A) →(NaHCO3, H2O) (B) (C5H8O) →(Na2Cr2O7) (C). End product of the reaction is: (a) cyclopentanone with side C=C; (b) cyclopent-2-enone; (c) cyclopent-2-en-1-ol; (d) cyclopenta-dienone.

Solution. Answer (from key): (b). HCl adds to cyclopentadiene to give 3-chlorocyclopentene (A); hydrolysis with NaHCO3/H2O gives cyclopent-2-en-1-ol (B, C5H8O); Na2Cr2O7 oxidises the secondary allylic alcohol to cyclopent-2-en-1-one (C).

Teacher's Note: Check C5H8O: allylic alcohol, then oxidation to the enone.

Exam Note: Use the formula to identify B.

Question 31. 1-Methyl-1-vinylcyclopentane (a quaternary ring carbon bearing a CH3 and a vinyl group) + HBr/CCl4 → A (major). Product (A) is: [Options (a)-(d) are drawn bromides.]

Solution. Answer (from key): (c). Protonation of the vinyl group gives a secondary cation, which rearranges by ring expansion (alkyl shift) to a tertiary cyclohexyl cation; Br− adds there to give the tertiary bromo-dimethylcyclohexane (c).

Teacher's Note: 2° cation next to a quaternary carbon: ring expansion to a 3° cation.

Exam Note: Show the shift, then bromide capture.

Question 32. A →(H2 (excess), Pt) decalin; A →(KMnO4) cyclohexane-1,2-dicarboxylic acid + oxalic acid (HO2C–CO2H). Compound (A) is: [Options (a)-(d) are drawn bicyclic dienes/naphthalene.]

Solution. Answer (from key): (b). Hydrogenation to decalin shows that A has the decalin skeleton. Oxalic acid comes from two adjacent sp2 carbons in the ring that are not at the ring fusion. A diene with a conjugated pair of double bonds in one ring (CH=CH–CH=CH) gives, on cleavage, the cyclohexane-1,2-dicarboxylic acid (from the two ring-fusion carbons) and oxalic acid (from the two central carbons).

Teacher's Note: Oxalic acid means two adjacent CH=CH carbons between two cleaved C=C bonds.

Exam Note: Work backwards from the oxidation fragments.

Question 33. 4-Hydroxycyclohexene (OH on a wedge) →(OsO4) X + Y (12 : 1). Product (X) will be: [Options (a)-(d) are drawn triols and epoxy alcohols.]

Solution. Answer (from key): (a). OsO4 adds syn to the face of the double bond opposite to the existing OH group (less hindered), giving the cis diol trans to the OH substituent (X, major, 12 parts); the other face gives Y (1 part). That is drawn as option (a).

Teacher's Note: Syn dihydroxylation from the face opposite the bulky OH, the less hindered side.

Exam Note: Say syn, and approach anti to the substituent.

Question 34. Ph–CH=CH–Ph →(Br2/CCl4) A →(2 NaNH2) B →(H2, Pd/CaCO3) C. Product (C) is: (a) trans-stilbene; (b) cis-stilbene; (c) 1,1-diphenylethene; (d) diphenylacetylene.

Solution. Answer (from key): (b). Br2 adds to give 1,2-dibromo-1,2-diphenylethane (A); two NaNH2 eliminate 2 HBr to give diphenylacetylene (B); H2 over the poisoned Pd/CaCO3 (Lindlar-type) catalyst adds syn to give cis-stilbene (C).

Teacher's Note: Dibromide, double dehydrohalogenation to alkyne, then Lindlar gives the cis alkene.

Exam Note: Poisoned Pd gives cis, not trans or alkane.

Question 35. A bicyclic diene (cyclohexene ring fused to cyclopentane, with one tetra-substituted C=C and one other C=C) + MMPP (one equivalent), ethanol → X (74%). MMPP = magnesium monoperoxyphthalate. Product (X) is: [Options (a)-(d) are drawn structures.]

Solution. Answer (from key): (b). A peracid is an electrophilic oxidant, so it epoxidises the more electron-rich (more highly substituted) C=C; with one equivalent only the tetra-substituted double bond is epoxidised, giving the ring-fusion epoxide (b).

Teacher's Note: Peracids epoxidise the more electron-rich, more substituted C=C first.

Exam Note: Compare alkene substitution to pick the site.

Question 36. An aryl ketone with an OMe group, an internal disubstituted alkene and a terminal alkene (a hexenyl ketone side chain) + MCPBA → P (75%). Product (P) is: (a) terminal alkene epoxidised; (b) internal alkene epoxidised, terminal alkene intact; (c) an epoxy ester (Baeyer-Villiger type); (d) None of these.

Solution. Answer (from key): (b). MCPBA epoxidises the more electron-rich, more substituted internal C=C faster than the terminal C=C; the ketone is not oxidised under these conditions. The product is the internal epoxide with the terminal alkene unchanged.

Teacher's Note: More substituted alkene reacts faster with electrophilic peracids.

Exam Note: Pick the more electron-rich C=C.

Question 37. The cyclic osmate ester complexed with pyridine (formed from 1,2-dimethylcyclopentene + OsO4) →(KOH, mannitol/water) A. Product (A) is: (a) a trans diol (HO and CH3 arrangement); (b) the cis-1,2-dimethylcyclopentane-1,2-diol (both OH on the same face); (c) 1,2-dimethylcyclopentane; (d) a ketone.

Solution. Answer (from key): (b). Hydrolysis of the cyclic osmate ester breaks the O–Os bonds but not the C–O bonds, so the two OH groups stay on the same face: cis-1,2-dimethylcyclopentane-1,2-diol (meso).

Teacher's Note: The C–O bonds survive, so both OH groups stay cis.

Exam Note: State: cis (syn) diol, meso.

Question 38. Toluene + CBrCl3 →(hν) (A) (no ring substitution). Product (A) is: (a) Ph–CH2–Cl; (b) Ph–CH2–Br; (c) Ph–CH2–CCl3; (d) Ph–CH2–CBrCl2.

Solution. Answer (from key): (b). The •CCl3 radical abstracts a benzylic hydrogen to give the benzyl radical, which abstracts Br from CBrCl3 (C–Br is the weakest bond) to give PhCH2Br and regenerate •CCl3.

Teacher's Note: Radical chain: •CCl3 takes benzylic H; benzyl radical takes Br.

Exam Note: C–Br is the weakest bond in CBrCl3.

Question 39. A cyclohexene bearing a tetra-substituted-type ring alkene and another C=C (a 1,4-cyclohexadiene with methyl groups) + MCPBA → (A); MCPBA = metachloroperbenzoic acid. Product (A) is: [Options (a)-(d) are drawn epoxides/alcohols.]

Solution. Answer (from key): (b). MCPBA is an electrophilic oxidant and epoxidises the more electron-rich (more substituted) C=C of the diene, giving the epoxide drawn in (b) with the less substituted alkene left intact.

Teacher's Note: Epoxidation goes to the more substituted, more nucleophilic C=C.

Exam Note: Compare the number of alkyl groups on each C=C.

Question 40. The major product of the following reaction sequence is: 2-methylbut-2-ene-type alkene (trisubstituted C=C) →(1. B2H6; 2. H2O2, HO−) ? [Options (a)-(d) are drawn alcohols and an epoxide.]

Solution. Answer (from key): (b). Hydroboration-oxidation adds H and OH syn with anti-Markovnikov orientation: boron goes to the less substituted carbon, so OH ends on the less substituted carbon of the double bond, giving the secondary alcohol drawn in (b).

Teacher's Note: Boron attaches to the less hindered carbon; oxidation puts OH there.

Exam Note: Anti-Markovnikov alcohol, syn addition.

Question 41. Which one of the following compounds gives acetone, (CH3)2C=O, as one of the products of its ozonolysis? (a) a terminal alkene with one CH3 branch; (b) an internal alkene with a CH3 branch; (c) an alkene without a =C(CH3)2 unit; (d) cyclohexylidene-isopropylidene, (CH3)2C=C(CH2)5.

Solution. Answer (from key): (d). Ozonolysis splits C=C into two C=O groups. Acetone forms only if one C=C carbon carries two CH3 groups, i.e. a =C(CH3)2 end. Compound (d) has this unit, and the other carbon gives cyclohexanone.

Teacher's Note: Acetone needs a =C(CH3)2 end on the alkene.

Exam Note: Locate the isopropylidene group.

Question 42. Addition of HCl to 3,3-dimethyl-1-butene yields two products, one of which has a rearranged carbon skeleton. Among the following carbocations, select the possible intermediates in that reaction: 1. (CH3)3C–C+H–CH2Cl; 2. (CH3)3C–C+H–CH3; 3. (CH3)2C+–C(CH3)2Cl; 4. (CH3)2C+–CH(CH3)2. (a) 1, 2; (b) 1, 3; (c) 1, 4; (d) 2, 3; (e) 2, 4.

Solution. Answer (from key): (e). H+ adds to C-1 to give the secondary cation (CH3)3C–C+H–CH3 (cation 2). A 1,2-methyl shift then gives the more stable tertiary cation (CH3)2C+–CH(CH3)2 (cation 4). Cl− captures each, giving the normal and the rearranged product. Cations 1 and 3 contain Cl and are not formed in this way.

Teacher's Note: Secondary cation, then 1,2-methyl shift to a tertiary cation: two intermediates.

Exam Note: Write the cation, then the methyl shift.

Question 43. Conversion of cyclohexene to cyclohexanol can be conveniently achieved by: (a) NaOH + H2O; (b) Br2–H2O; (c) hydroboration, oxidation; (d) hydroboration, hydrolysis.

Solution. Answer (from key): (c). Hydroboration followed by oxidation (BH3, then H2O2/HO−) converts the alkene directly to the alcohol. Direct reaction with NaOH/H2O does nothing and Br2–H2O gives a bromohydrin; hydrolysis alone only gives the alkane (protonolysis) from an organoborane.

Teacher's Note: Oxidation (H2O2/HO−) converts C–B to C–OH; hydrolysis gives the alkane.

Exam Note: Oxidation, not hydrolysis, gives the alcohol.

Question 44. Trans-cyclohexane-1,2-diol can be obtained by the reaction of cyclohexene with: (a) KMnO4; (b) OsO4; (c) peroxyformic acid/H3O+; (d) SeO2.

Solution. Answer (from key): (c). Peroxyformic acid forms the epoxide, and acid-catalysed ring opening by water takes place from the back side, giving the trans diol (anti hydroxylation). KMnO4 and OsO4 give the cis diol (syn).

Teacher's Note: Epoxide opening by backside attack gives trans; OsO4 and KMnO4 give cis.

Exam Note: Distinguish anti from syn hydroxylation.

Question 45. Bromination of (E)-2-butenedioic acid gives: (a) (2R, 3S)-2,3-dibromosuccinic acid; (b) (2R, 3R)-2,3-dibromosuccinic acid; (c) a mixture of (2R, 3R) and (2S, 3S)-2,3-dibromosuccinic acid; (d) (2S, 3S)-2,3-dibromosuccinic acid.

Solution. Answer (from key): (a). Br2 adds anti. Anti addition to a trans (E) alkene gives the meso compound, (2R,3S)-2,3-dibromosuccinic acid.

Teacher's Note: Anti addition to an E alkene gives the meso (R,S) product.

Exam Note: E plus anti addition gives meso; Z gives racemate.

Question 46. The major product formed during the reaction of 1-methylcyclopentene with CH3CO3H is: [Options (a)-(d) are drawn: (a) and (d) are trans/cis methylcyclopentanols, (c) is 1-methylcyclopentene oxide.]

Solution. Answer (from key): (c). A peracid epoxidises the C=C in one step, giving 1-methylcyclopentene oxide (the epoxide). With no acid or water present the epoxide is not opened.

Teacher's Note: Peracid plus alkene gives an epoxide; no water, so no diol or alcohol.

Exam Note: Name the reagent type: peracid gives epoxide.

Question 47. HC(CO2H)=CH(CO2H) (maleic/fumaric acid) →(NaOH, two mole) (A) →(electrolysis) (B). Product (B) of the reaction is: (a) CH3–CH3; (b) H2C=CH2; (c) H–C≡C–H; (d) CH2=CH–CH=CH2.

Solution. Answer (from key): (c). Two moles of NaOH give the disodium salt of the unsaturated diacid (A). Kolbe electrolysis removes both carboxylate groups as CO2 and forms a new π bond, so the C=C becomes a triple bond: acetylene, H–C≡C–H.

Teacher's Note: Kolbe on an unsaturated dicarboxylate raises the bond order: alkene gives alkyne.

Exam Note: Dicarboxylate gives CO2 loss plus an extra π bond.

Question 48. CH2=CH–CH2–CH2–CO2H (pent-4-enoic acid) →(Br2, NaHCO3) a lactone (cyclic ester) (bromolactonization). [Options (a)-(d) are drawn: (a) hydroxy lactone, (b) bromomethyl-γ-lactone, (c) dibromo acid, (d) hydroxy lactone isomer.]

Solution. Answer (from key): (b). Br+ forms a bromonium ion at the C=C. The carboxylate group of the same molecule attacks the more substituted carbon of the bromonium ion intramolecularly, closing a five-membered ring (γ-lactone) with a CH2Br group, as in (b).

Teacher's Note: Internal carboxylate opens the bromonium ion, forming a five-membered bromolactone.

Exam Note: Name it: bromolactonization gives CH2Br lactone.

Question 49. Cyclohexene →(1) (CF3CO2)2Hg, CH3CH2OH; (2) NaBH4, HO− (P) (100%). Product (P) is: (a) cyclohexanol; (b) ethoxycyclohexane (cyclohexyl ethyl ether); (c) trans-cyclohexane-1,2-diol; (d) 1,2-diethoxycyclohexane.

Solution. Answer (from key): (b). Alkoxymercuration-demercuration. Ethanol (the solvent) attacks the mercurinium ion at the more substituted carbon, giving the organomercury ether, and NaBH4 replaces Hg by H. The product is ethyl cyclohexyl ether, with no rearrangement.

Teacher's Note: Alcohol solvent gives an ether by alkoxymercuration; NaBH4 removes Hg.

Exam Note: Solvent ROH becomes the OR group.

Question 50. What is the major product expected from cyclohexene + cold KMnO4, HO−? [Options (a)-(d) are chair drawings of diols and a hydroxy ketone.]

Solution. Answer (from key): (b). Cold dilute alkaline KMnO4 hydroxylates the C=C by syn addition through a cyclic manganate ester, giving cis-cyclohexane-1,2-diol (one OH axial, one equatorial in the chair), option (b). Hot concentrated KMnO4 would cleave the ring.

Teacher's Note: Cold, dilute, alkaline KMnO4 gives syn dihydroxylation: the cis diol.

Exam Note: State the conditions: cold means no cleavage.

Question 51. CH3–CH=CH2 →(Br2/hν, low concentration) (A). Product (A) of the reaction is: (a) CH3–CHBr–CH2Br; (b) H2C=CH–CH2–Br; (c) CH3–CBr=CH2; (d) Br–CH2–CH2–CH2–Br.

Solution. Answer (from key): (b). At low Br2 concentration under light, radical allylic substitution (as with NBS) is favoured over addition to the C=C. The allylic hydrogen is replaced by Br to give allyl bromide, CH2=CH–CH2Br.

Teacher's Note: Low Br2 concentration plus light favours allylic substitution over addition.

Exam Note: Low [Br2] means substitution, not addition.

Question 52. A lactone with an Et–CH– side and a CH3–C(=CH2) isopropenyl group →(A) the same lactone with the isopropenyl group converted to CH3–C(=O) (methyl ketone). Reagent (A) in the reaction is: (a) O3/Zn(H2O); (b) HIO4; (c) CrO3; (d) cold dilute KMnO4.

Solution. Answer (from key): (a). Ozonolysis with a reductive work-up (O3, then Zn/H2O) cleaves the C=CH2 to the methyl ketone (CH2 is lost as formaldehyde) without touching the lactone or over-oxidising.

Teacher's Note: Reductive ozonolysis turns =CH2 into a ketone and leaves the ester untouched.

Exam Note: Ozonolysis converts C=CH2 into C=O.

Question 53. 1,2-Dimethylcyclopentene →(1. OsO4; 2. NaHSO3) Product of the reaction is: [Options (a)-(d) are drawn diols: (b) is the cis diol with the two CH3 groups on the opposite face to both OH.]

Solution. Answer (from key): (b). OsO4 adds both OH groups to the same face (syn addition), so both CH3 groups end up on the opposite face, giving cis-1,2-dimethylcyclopentane-1,2-diol (a meso compound), option (b).

Teacher's Note: Syn addition places both OH on one face; the product has a mirror plane (meso).

Exam Note: Both OH cis, both CH3 on the other face.

Question 54. Which compound is a possible product from addition of Br2 to 1-butene? (a) 1,1-dibromobutane; (b) 2,2-dibromobutane (Br on one carbon); (c) 1,4-dibromobutane; (d) 1,2-dibromobutane.

Solution. Answer (from key): (d). Br2 adds across the C=C of CH2=CH–CH2CH3 with one Br on each alkene carbon, giving 1,2-dibromobutane, CH2Br–CHBr–CH2CH3.

Teacher's Note: Halogen addition puts one Br on each alkene carbon: vicinal dibromide.

Exam Note: Vicinal, not geminal.

Question 55. Addition of Br2 to cis-2-butene would give a product which is: (a) achiral; (b) racemic; (c) meso; (d) optically active.

Solution. Answer (from key): (b). Anti addition of Br2 to cis-2-butene gives (2R,3R)- and (2S,3S)-2,3-dibromobutane in equal amounts, a racemic mixture (so the product mixture is not optically active overall).

Teacher's Note: Anti addition to a cis alkene gives the racemic pair.

Exam Note: Z alkene plus anti addition gives racemate; E gives meso.

Question 56. Addition of Br2 to trans-2-butene would give a product which is: (a) achiral; (b) racemic; (c) meso; (d) optically active.

Solution. Answer (from key): (c). Anti addition to trans-2-butene gives (2R,3S)-2,3-dibromobutane, which has a mirror plane and is meso. (It is also achiral, but the more specific answer is meso.)

Teacher's Note: Anti addition to a trans alkene gives the meso compound.

Exam Note: Choose 'meso', the most specific term.

Question 57. Addition of OsO4 to cyclopentene would give a product which is: (a) achiral; (b) racemic; (c) meso; (d) optically active.

Solution. Answer (from key): (c). Syn addition of two OH groups to cyclopentene gives cis-cyclopentane-1,2-diol, which has an internal mirror plane and is meso.

Teacher's Note: Syn dihydroxylation of a cyclic alkene gives the cis, meso diol.

Exam Note: Cis diol on a symmetric ring means meso.

Question 58. Addition of BH3 followed by H2O2 to trans-2-butene would give a product which is: (a) achiral; (b) racemic; (c) meso; (d) optically active.

Solution. Answer (from key): (b). The product is butan-2-ol, which has one stereocentre. H and OH add to the achiral alkene from either face with equal probability, so (R)- and (S)-butan-2-ol form equally: a racemic mixture.

Teacher's Note: Achiral alkene plus achiral reagents gives a racemate when one stereocentre forms.

Exam Note: One new stereocentre from achiral reagents gives racemate.

Question 59. CH3–CH(Ph)–CH=CH2 (3-phenylbut-1-ene) →(A) CH3–CH(Ph)–CH(OH)–CH3; reagent A may be: (a) H2O/H+; (b) BH3·THF/H2O2–OH−; (c) Hg(OCOCH3)2, H2O/NaBH4, NaOH; (d) All are possible.

Solution. Answer (from key): (c). The required product is the Markovnikov alcohol with the carbon skeleton unchanged. Oxymercuration-demercuration gives Markovnikov addition of H2O without carbocation rearrangement. H2O/H+ would allow a hydride shift to the benzylic cation (rearranged product), and BH3 gives the anti-Markovnikov primary alcohol.

Teacher's Note: Only oxymercuration gives the Markovnikov alcohol with no hydride shift.

Exam Note: Avoid rearrangement: choose oxymercuration.

Question 60. The major product of the following reaction is: CH3–CH=CH2 + HBr (in the presence of (C6H5CO)2O2): (a) CH3–CH2–CH2–Br; (b) CH3CH(Br)–CH3; (c) BrCH2–CH=CH2; (d) bromocyclopropane.

Solution. Answer (from key): (a). Benzoyl peroxide starts a radical chain (peroxide effect). Br• adds to the terminal carbon to give the more stable secondary radical, and that radical abstracts H from HBr. The result is the anti-Markovnikov product, 1-bromopropane.

Teacher's Note: Peroxide effect: Br radical adds to the terminal carbon, giving the 2° radical.

Exam Note: Peroxides with HBr only give anti-Markovnikov.

Question 61. A cyclooctene ring carrying a CH(OH)–CH2OH-type diol side chain →(O3, H2O2) (A) →(−H2O, Δ) (B). Identify (B): [Options (a)-(d) are drawn hydroxy-lactones with a (CH2)n–CO2H chain.]

Solution. Answer (from key): (b). Ozonolysis with oxidative work-up (H2O2) opens the ring to a dicarboxylic acid (A) that also carries the hydroxy group. On heating, loss of H2O between the acid and the hydroxy group forms a five-membered lactone (γ-lactone) with a (CH2)5–CO2H chain, option (b).

Teacher's Note: Oxidative ozonolysis gives acids; a γ-hydroxy acid closes to a five-membered lactone.

Exam Note: Count carbons to get the chain length (CH2)5.

Question 62. Which of the following is a major product of the reaction of 1-methylcyclohexene with Br2/H2O? [Options (a)-(d) are drawn bromohydrins with wedge/hash bonds.]

Solution. Answer (from key): (d). A bromonium ion forms and water attacks it from the opposite face at the more substituted (tertiary) carbon. The product is the trans bromohydrin with OH on the carbon bearing CH3 and Br on the adjacent carbon on the opposite face, option (d).

Teacher's Note: Water attacks the bromonium ion anti, at the more substituted carbon.

Exam Note: OH on the tertiary carbon; trans to Br.

Question 63. In methyl alcohol solution, bromine reacts with ethylene (ethene) to yield BrCH2CH2OCH3 in addition to 1,2-dibromoethane because: (a) the methyl alcohol solvates the bromine; (b) the ion formed initially may react with Br− or CH3OH; (c) this is a free radical reaction; (d) the reaction follows Markovnikov's rule.

Solution. Corrected: (b). (The printed key gives (a); the correct reason is (b).) Br2 adds to the C=C to form a cyclic bromonium ion. In methanol the solvent is present in large excess, so the bromonium ion can be opened by either Br− (giving 1,2-dibromoethane) or CH3OH (giving BrCH2CH2OCH3). Solvation of bromine does not explain the ether product.

Teacher's Note: A bromonium ion intermediate can be opened by either Br− or solvent.

Exam Note: Mention the cyclic bromonium ion.

Question 64. Which of the following compounds was the starting material for the oxidation shown below? ? →(KMnO4/H+) a polycarboxylic acid / keto acid (HO2C–CH2 … CO2H chain with C=O groups) + CO2. [Options (a)-(d) are drawn cycloalkenes with an allyl or vinyl side chain.]

Solution. Answer (from key): (b). The key gives (b). Acidic KMnO4 cleaves each C=C and oxidises a terminal =CH2 to CO2, which fits the product plus CO2. (The drawn product and options are skeletal structures; please check this item against the book.)

Teacher's Note: Terminal =CH2 gives CO2; internal C=C gives two acids or a ketone.

Exam Note: Work backwards from the cleavage products.

Question 65. Which series of reactions will achieve the transformation of propene into BrCH2–CHCl–CH2Cl (1-bromo-2,3-dichloropropane)? (a) 1: Cl2/CCl4; 2: Br2; (b) 1: HBr; 2: Cl2/CCl4; (c) 1: Cl2/CCl4; 2: NBS/hν; (d) 1: NBS/hν; 2: Cl2/CCl4.

Solution. Answer (from key): (d). NBS/hν replaces an allylic hydrogen by Br, giving allyl bromide, CH2=CH–CH2Br. Cl2/CCl4 then adds across the C=C to give BrCH2–CHCl–CH2Cl.

Teacher's Note: Allylic bromination first, then halogen addition across the C=C.

Exam Note: Order matters: substitution before addition.

Question 66. Taking into account the stability of various cycloalkanes and carbocations, as well as the rules governing mechanisms of carbocation rearrangements, what is the most likely product of the reaction of a cyclopentyl-substituted alkene (a cyclopentane ring with a CH3 and a C(CH3)=CH2-type group on one carbon) with HI? [Options (a)-(d) are drawn iodides.]

Solution. Answer (from key): (b). Protonation gives a secondary cation next to a quaternary ring carbon. A ring-expansion shift converts the five-membered ring to a six-membered ring and gives a tertiary cation, which is captured by iodide, as drawn in (b).

Teacher's Note: Cation next to a cyclopentane: ring expansion to a stable tertiary cyclohexyl cation.

Exam Note: Show ring expansion before iodide adds.

Question 67. A triene is treated with ozone followed by zinc in acetic acid to give three products: H–CHO (formaldehyde), OHC–CH2–CH2–CH2…-type dialdehyde (a ketodialdehyde), and OHC–CH2–CHO-type dial. What is the structure of the triene? [Options (a)-(d) are drawn vinyl-substituted cyclohexadienes.]

Solution. Answer (from key): (d). Working backwards, the three products are joined at their carbonyl carbons: the =CH2 end gives formaldehyde, the ring double bonds give the two dicarbonyl products. The triene that matches all three fragments is option (d).

Teacher's Note: Join the carbonyl carbons of the fragments to rebuild the triene.

Exam Note: Rebuild: mark each C=O as a former C=C.

Question 68. Which of the following compounds would yield the trialkylborane tris(2-methylbutyl)borane when treated with BH3/THF? (a) 2-methylbut-1-ene; (b) 2-methylbut-2-ene; (c) 3-methylbut-1-ene; (d) 3-methylbut-1-yne.

Solution. Answer (from key): (a). Boron adds to the less substituted carbon. 2-Methylbut-1-ene, CH2=C(CH3)CH2CH3, gives B–CH2–CH(CH3)CH2CH3, the 2-methylbutyl group, and three equivalents give the trialkylborane.

Teacher's Note: Boron goes to the terminal CH2, giving the 2-methylbutyl group.

Exam Note: B on the less substituted carbon.

Question 69. If the following compound (a cyclopentene ring with a methyl group on one C=C carbon and an exocyclic =CH2 on the ring) is treated with Pd/C in excess hydrogen gas, how many stereoisomers of the product will be obtained? (a) 1; (b) 2; (c) 3; (d) 4.

Solution. Answer (from key): (c). Both C=C bonds are hydrogenated, giving 1,3-dimethylcyclopentane. This has two stereocentres: the cis isomer is meso (1 stereoisomer) and the trans isomer exists as a pair of enantiomers (2 stereoisomers), a total of 3.

Teacher's Note: 1,3-Dimethylcyclopentane: cis (meso) plus trans (enantiomer pair) makes three.

Exam Note: Count stereoisomers: cis meso + trans pair.

Question 70. Which is the most precise designation of stereochemistry for the products formed in the electrophilic addition of DBr to 1-methylcyclohexene? (D = 2H.) (a) Br and D on opposite faces (one drawn stereoisomer); (b) Br and D on the same face (drawn stereoisomer); (c) Br and H drawn; (d) both (a) and (b).

Solution. Answer (from key): (d). D+ adds to the C=C to form the tertiary cation, and Br− attacks the planar cation from either face. Both the cis and trans (relative to D) products form, so both (a) and (b) are needed.

Teacher's Note: A planar carbocation is attacked from both faces: both stereoisomers form.

Exam Note: Planar cation means no stereoselectivity.

Question 71. Consider the addition of HBr to 3,3-dimethyl-1-butene (CH3)3C–CH=CH2 giving (CH3)2CBr–CH(CH3)2 shown. What is the best mechanistic explanation for the formation of the observed product? (a) Protonation of the alkene followed by a hydride shift and addition of bromide; (b) Double bond shift in the alkene followed by protonation and addition of bromide; (c) Addition of bromide to the alkene followed by a double bond shift and protonation; (d) Protonation of the alkene followed by a methyl shift and addition of bromide to the carbocation.

Solution. Answer (from key): (d). Protonation gives the secondary cation (CH3)3C–C+H–CH3. A 1,2-methyl shift from the quaternary carbon gives the tertiary cation (CH3)2C+–CH(CH3)2, which Br− captures. A hydride shift is not possible because the adjacent carbon has no H.

Teacher's Note: Neighbouring carbon is quaternary (no H), so a methyl, not hydride, shifts.

Exam Note: Name the shift: 1,2-methyl shift.

Question 72. Propene CH3CH=CH2 can be converted into 1-propanol by oxidation. Indicate which set of reagents is ideal to effect the above conversion: (a) KMnO4 (alkaline); (b) osmium tetroxide (OsO4/CH2Cl2); (c) B2H6 and alk. H2O2; (d) O3/Zn.

Solution. Answer (from key): (c). Hydroboration-oxidation gives anti-Markovnikov hydration, so propene gives 1-propanol, CH3CH2CH2OH. KMnO4 and OsO4 give the diol, and O3/Zn cleaves the C=C.

Teacher's Note: Hydroboration-oxidation gives the anti-Markovnikov alcohol, 1-propanol.

Exam Note: Anti-Markovnikov hydration needs B2H6.

Question 73. Which is the most suitable reagent among the following to distinguish compound (3) from the others? (1) CH3C≡C–CH3; (2) CH3CH2–CH2–CH3; (3) CH3CH2C≡CH; (4) CH3CH=CH2. (a) Bromine in carbon tetrachloride; (b) bromine in acetic acid solution; (c) alk. KMnO4; (d) ammoniacal silver nitrate.

Solution. Answer (from key): (d). Compound (3), but-1-yne, is a terminal alkyne with an acidic ≡C–H and gives a white precipitate of silver acetylide with ammoniacal AgNO3. 2-Butyne, butane and propene give no precipitate; the other reagents react with several of the compounds.

Teacher's Note: Only terminal alkynes form a silver acetylide precipitate.

Exam Note: Terminal ≡C–H test: Tollens-type AgNO3.

Question 74. The principal organic product formed in the reaction CH2=CH(CH2)8COOH + HBr (peroxide) is: (a) CH3–CHBr(CH2)8COOH; (b) CH2=CH(CH2)8COBr; (c) CH2BrCH2(CH2)8COOH; (d) CH2=CH(CH2)7CHBrCOOH.

Solution. Answer (from key): (c). With peroxide, HBr adds by the radical (anti-Markovnikov) route: Br goes to the terminal carbon, giving 11-bromoundecanoic acid, BrCH2CH2(CH2)8COOH. The COOH group is unaffected.

Teacher's Note: Peroxide effect: Br on the terminal carbon; COOH is a spectator.

Exam Note: Anti-Markovnikov HBr, peroxide present.

Question 75. When 2-butyne is treated with Pd–BaSO4 (and H2), the product formed will be: (a) cis-2-butene; (b) trans-2-butene; (c) 1-butene; (d) 2-hydroxybutane.

Solution. Answer (from key): (a). Pd on BaSO4 (poisoned, Lindlar-type catalyst) adds H2 syn and stops at the alkene stage, giving cis-2-butene.

Teacher's Note: Poisoned Pd catalyst adds H2 syn and stops at the alkene: cis.

Exam Note: Lindlar-type gives cis alkene.

Question 76. In the reaction CH3C≡C–CH3 →(i) X; (ii) Zn/H2O CH3–CO–CO–CH3, X is: (a) HNO3; (b) O2; (c) O3; (d) KMnO4.

Solution. Answer (from key): (c). Ozone adds to the triple bond, and the reductive work-up (Zn/H2O) gives the 1,2-diketone biacetyl, CH3COCOCH3. (Strong oxidants like KMnO4 would cleave to acids.)

Teacher's Note: Ozonolysis of an alkyne gives a 1,2-dicarbonyl compound.

Exam Note: Alkyne plus O3, then Zn gives a diketone.

Question 77. Which of the following alkenes on catalytic hydrogenation gives cis and trans isomers? (a) 4-methyl-methylenecyclohexane (H2C=C6H9–CH3); (b) 1,4-dimethylcyclohexene-type (CH3-substituted ring alkene); (c) a bicyclic (carene-type) alkene with a CH3 and a gem-dimethylcyclopropane unit; (d) all of these.

Solution. Answer (from key): (d). Each of (a), (b) and (c) gives a ring with substituents that can lie on the same side or on opposite sides after hydrogenation: (a) and (b) give cis and trans 1,4-dimethylcyclohexane, and (c) gives cis and trans ring-substituted products, so all three give cis/trans isomers.

Teacher's Note: Hydrogenation creates a ring with two substituents: cis and trans isomers form.

Exam Note: Check ring substituents after hydrogenation.

Question 78. In the reaction of hydrogen bromide with an alkene (in the absence of peroxides), the first step of the reaction is the ________ to the alkene. (a) fast addition of an electrophile; (b) slow addition of an electrophile; (c) fast addition of a nucleophile; (d) slow addition of a nucleophile.

Solution. Answer (from key): (b). The first step is the slow, rate-determining addition of the electrophile H+ to the C=C, forming a carbocation. The fast second step is the attack of Br−.

Teacher's Note: Protonation is the slow, rate-determining step; bromide capture is fast.

Exam Note: Rate-determining step: electrophile H+ adds.

Question 79. Which of the following alcohols cannot be prepared from hydration of an alkene? [Options (a)-(d) are drawn skeletal alcohols.]

Solution. Answer (from key): (d). An alcohol can be made by hydration only if some alkene can give it, which needs a hydrogen on a carbon next to the C–OH carbon. The alcohol in (d) has no such adjacent carbon bearing H, so no alkene can give it. (The drawn structures are skeletal; please check the item against the book.)

Teacher's Note: An alcohol must have a neighbouring carbon with H to come from an alkene.

Exam Note: Check adjacent carbons for hydrogen.

Question 80. Which of the species shown below is the most stable form of the intermediate in the electrophilic addition of Cl2 in water to cyclohexene to form a halohydrin? (a) a protonated epoxide (oxonium) drawn; (b) a cyclobutyl cation with Cl; (c) a vinyl-type chlorocation; (d) the bridged chloronium ion on the cyclohexane ring.

Solution. Answer (from key): (d). Cl2 adds to the alkene to form a bridged chloronium ion, in which every atom has a full octet, so it is the most stable intermediate. Water then opens it from the opposite face to give the trans halohydrin.

Teacher's Note: The bridged halonium ion has full octets and fixes anti addition.

Exam Note: The halonium bridge explains trans halohydrin.

Question 81. The reaction (CH3)2C=CH2 + Br• → (CH3)2C•–CH2Br is an example of a/an ________ step in a radical chain reaction. (a) initiation; (b) termination; (c) propagation; (d) heterolytic cleavage.

Solution. Answer (from key): (c). A radical reacts with a molecule to give a new radical, so the radical chain carries on: this is a propagation step.

Teacher's Note: A radical in and a radical out is propagation.

Exam Note: Propagation: radical consumed, radical formed.

Question 82. Which of the following most accurately describes the first step in the reaction of hydrogen chloride with 1-butene? [Options (a)-(d) are curved-arrow drawings: (a) radical cleavage giving an alkyl radical and Cl•; (b) the C=C π electrons attack H of H–Cl, giving a carbocation and Cl−; (c) wrong-direction arrow giving a carbanion and Cl+; (d) hydride transfer.]

Solution. Answer (from key): (b). The π bond of the alkene acts as a nucleophile and attacks the proton of HCl; the H–Cl bond breaks heterolytically, giving the secondary carbocation and Cl−.

Teacher's Note: The π bond attacks H+; HCl breaks heterolytically to give a cation and Cl−.

Exam Note: Arrows start at the π bond, end at H.

Question 83. Which of the following best describes the flow of electrons in the acid-catalysed dimerisation of (CH3)2C=CH2? [Options (a)-(d) are curved-arrow drawings.]

Solution. Answer (from key): (a). The π electrons of a second isobutene molecule (CH2=C(CH3)2) attack the tert-butyl cation (CH3)3C+; the arrow goes from the C=C π bond to the cationic carbon, forming a new C–C bond and a new tertiary cation.

Teacher's Note: Alkene π electrons attack the t-butyl cation; a new tertiary cation forms.

Exam Note: Arrow tail on the π bond, head on C+.

Question 84. Hydroboration of 1-methylcyclopentene using B2D6, followed by treatment with alkaline hydrogen peroxide, gives: [Options (a)-(d) are drawn stereoisomers of 2-methylcyclopentanol-1-d with wedge/hash bonds.]

Solution. Answer (from key): (a). Boron (later OH) adds to the less substituted carbon and D adds to the more substituted carbon, both from the same face (syn addition). Oxidation replaces B by OH with retention, so D and OH end up cis, as drawn in (a).

Teacher's Note: Syn addition: D and B add to one face; OH replaces B with retention.

Exam Note: D and OH cis, on adjacent carbons.

Question 85. HOOC–CH=CH–COOH (P) (the trans isomer, fumaric acid) and (Q) (the cis isomer, maleic acid) each + Br2/CCl4 → HOOC–CH(Br)–CH(Br)–COOH, (X) from P and (Y) from Q. The correct statements with respect to the above pair of reactions are that: (I) the reactions are stereospecific; (II) (X) is erythro and (Y) is threo isomer; (III) (X) is threo and (Y) is erythro isomer; (IV) each of (P) and (Q) gives a mixture of (X) and (Y). (a) I and II; (b) I and III; (c) I and IV; (d) II and IV.

Solution. Answer (from key): (a). Br2 adds anti. Anti addition to the trans alkene (P) gives only the meso (erythro) dibromide X, and anti addition to the cis alkene (Q) gives only the racemic (threo) dibromide Y. Each alkene gives a different single product, so the reaction is stereospecific: statements I and II are correct.

Teacher's Note: Anti addition: trans alkene gives meso (erythro), cis gives racemic (threo).

Exam Note: Stereospecific: each alkene gives its own product.

Question 86. The products P and Q in the following sequence of reactions are: 4-methylanisole →(Li, EtOH, NH3(l)) P →(i) O3 (1 equiv.), (ii) −78°C, Me2S Q. [Options (a)-(d) are drawn P/Q pairs.]

Solution. Answer (from key): (d). Birch reduction gives 1-methoxy-4-methylcyclohexa-1,4-diene (P): the OMe and CH3 remain on sp2 carbons. One equivalent of ozone cleaves the more electron-rich double bond (the enol ether, C(OMe)=CH), giving a ring-opened ester–aldehyde, Q, as drawn in (d).

Teacher's Note: Birch gives the 1,4-diene; ozone cleaves the electron-rich enol ether C=C first.

Exam Note: One equivalent of O3 attacks the most electron-rich C=C.

Question 87. 4-Pentenoic acid when treated with I2 and NaHCO3 gives: (a) 4,5-diiodopentanoic acid; (b) 5-iodomethyl-dihydrofuran-2-one (γ-iodomethyl-γ-butyrolactone); (c) 5-iodotetrahydropyran-2-one; (d) 4-pentenoyl iodide.

Solution. Answer (from key): (b). Iodolactonisation: I+ forms an iodonium ion on the C=C, and the carboxylate group attacks the internal carbon intramolecularly, closing a five-membered lactone with a CH2I group.

Teacher's Note: Carboxylate traps the iodonium ion internally: a five-membered iodolactone.

Exam Note: Name it: iodolactonisation, not diiodide.

Question 88. A bicyclic chlorohydrin-type substrate (a cyclohexane carrying a C(OH) group and an alkene/chloro side chain) →(H2SO4, 0°C, H2O) (A) →(−HCl) (B). Product (B) is: [Options (a)-(d) are drawn bicyclic (hydrindanone-type) ketones.]

Solution. Answer (from key): (b). The key gives (b). The acid generates a carbocation, which undergoes a pinacol-type ring-forming rearrangement and loses HCl to give the fused cyclopentanone, option (b). (The substrate is a skeletal drawing; please check this item against the book.)

Teacher's Note: Acid-generated cation rearranges (pinacol-type) to a stable fused ketone.

Exam Note: Show cation, shift, then loss of HCl.

Question 89. Styrene (Ph–CH=CH2) →(Br2/CCl4) (A) →(i) alc. KOH (ii) NaNH2 (B) →(i) NaNH2 (ii) CH3–Cl (C). Product (C) is: (a) Ph–C≡CNa; (b) Ph–CH2–C≡CH; (c) Ph–C≡C–CH3; (d) Ph–CH=C=CH2.

Solution. Answer (from key): (c). Br2 gives PhCHBr–CH2Br (A). Alcoholic KOH then NaNH2 remove two HBr to give phenylacetylene, Ph–C≡CH (B). NaNH2 forms the acetylide, which is alkylated by CH3Cl to give Ph–C≡C–CH3 (C).

Teacher's Note: Dibromide, double elimination to alkyne, then acetylide alkylation.

Exam Note: Terminal alkyne plus NaNH2 and RX extends the chain.

Question 90. Which of the following will give a mixture of cis and trans-1,4-dimethylcyclohexane when undergoing catalytic hydrogenation? (a) 4-methylmethylenecyclohexane; (b) 1,4-dimethylcyclohexene-type (ring alkene with CH3 substituents); (c) cis-3,6-dimethylcyclohexene; (d) both (a) and (b).

Solution. Answer (from key): (d). (a) and (b) each form a new stereocentre on hydrogenation at a ring carbon bearing a methyl-substituted position, so H2 can add from either face and both cis- and trans-1,4-dimethylcyclohexane form. In (c) the cis relationship is already fixed, so hydrogenation gives only the cis product.

Teacher's Note: A new ring stereocentre formed from either face gives cis plus trans.

Exam Note: Fixed cis substrate gives only cis.

Question 91. An optically active compound A with molecular formula C8H14 undergoes catalytic hydrogenation to give a meso-type (achiral) compound. The structure of (A) is: (a) cis-3,6-dimethylcyclohexene; (b) trans-3,6-dimethylcyclohexene; (c) 1,2-dimethylcyclohexene-type isomer; (d) 3-ethylcyclohexene (drawn).

Solution. Answer (from key): (b). trans-3,6-Dimethylcyclohexene is chiral (optically active). Hydrogenation of the ring C=C gives trans-1,4-dimethylcyclohexane, which has a centre of symmetry and is achiral (the book calls this meso-type). The cis isomer in (a) is itself achiral, so it cannot be the optically active compound.

Teacher's Note: A chiral alkene can give an achiral alkane if hydrogenation restores symmetry.

Exam Note: Check A is chiral, product achiral.

Question 92. 3,4-Dimethylhex-3-ene, CH3CH2(CH3)C=C(CH3)CH2CH3, + HBr (peroxide, R2O2). How many products will be formed? (a) 2; (b) 4; (c) 3; (d) 6.

Solution. Answer (from key): (b). Br• adds to either alkene carbon (they are equivalent), giving 3-bromo-3,4-dimethylhexane after H abstraction. The product has two stereocentres (C-3 and C-4) that are not equivalent, so there are 22 = 4 stereoisomers.

Teacher's Note: Two stereocentres give four stereoisomers; both alkene carbons are equivalent.

Exam Note: Count stereocentres: 2 gives 4 products.

Question 93. (E)-2,3-Dideuterio-2-butene (CH3 and CH3 trans, D and D trans) →(H2, Pt). Product of the reaction is: (a) racemic; (b) diastereomers; (c) meso; (d) pure enantiomers.

Solution. Answer (from key): (a). H2 adds syn to the E alkene, forming CH3CHD–CHDCH3. Syn addition to the trans alkene gives the (R,R) and (S,S) pair in equal amounts, a racemic mixture.

Teacher's Note: Syn addition to an E alkene gives the racemic pair; to a Z alkene the meso.

Exam Note: Syn addition: E gives racemate.

Question 94. cis-2-Butene + HBr (peroxide): product of the reaction is: (a) racemic; (b) diastereomer; (c) meso; (d) E and Z isomer.

Solution. Answer (from key): (a). HBr adds to give 2-bromobutane, with one new stereocentre. The Br• adds to the planar alkene and H is delivered to the planar radical from either face, giving equal (R)- and (S)-2-bromobutane: a racemic mixture.

Teacher's Note: One new stereocentre from a planar intermediate gives a racemate.

Exam Note: Planar radical: both faces equally.

Question 95. Two norbornene-type isomers (a) and (b), each with a CH3 and H on the one-carbon bridge (CH3 syn to the double bond in one, anti in the other). Rate of reaction towards reduction using H2/Pt: (a) a > b; (b) a = b; (c) b > a; (d) reduction of the given molecule is not possible.

Solution. Answer (from key): (a). The key gives a > b. Hydrogenation occurs on the less hindered face of the C=C; the isomer whose bridge methyl does not block that face reacts faster.

Teacher's Note: Hydrogenation is faster on the less hindered face of the C=C.

Exam Note: Judge the steric hindrance at the face of attack.

Question 96. An ozonide (a 1,2,4-trioxolane carrying R', H on one carbon and R, R on the other) + CH3–S–CH3 (dimethyl sulfide) → Product A + CH3–S(=O)–CH3. Product A of the above reaction is: (a) R–CO–R; (b) R'–CHO; (c) R–CO2H; (d) both (a) and (b).

Solution. Answer (from key): (d). Dimethyl sulfide reduces the ozonide (and is oxidised to DMSO), cleaving it into the two carbonyl compounds: the ketone R2C=O (a) and the aldehyde R'CHO (b). No oxidation to the acid occurs.

Teacher's Note: Reductive work-up splits the ozonide into a ketone and an aldehyde.

Exam Note: Reductive work-up: carbonyls, not acids.

Question 97. (Z)-2-Butene (cis-CH3CH=CHCH3) + MCPBA (meta-chloroperbenzoic acid) in CH2Cl2 → Product. Product is: [Options (a)-(d) are drawn 2,3-dimethyloxiranes.]

Solution. Answer (from key): (b). The peracid transfers O to the C=C in one step with retention of geometry (syn addition). The two CH3 groups, cis in the alkene, stay cis in the epoxide, giving cis-2,3-dimethyloxirane (meso), option (b).

Teacher's Note: Epoxidation is stereospecific syn: cis alkene gives cis epoxide.

Exam Note: Geometry of the alkene is retained.

Question 98. 1-Methylcyclopentene →(1) BH3; THF (2) H2O2, HO− (A). Product of the reaction is: [Options (a)-(d) are drawn 2-methylcyclopentanol stereoisomers.]

Solution. Answer (from key): (a). Anti-Markovnikov, syn addition of H and OH: OH goes to C-2 and H to C-1 on the same face. The CH3 on C-1 and the OH on C-2 therefore end up trans, giving trans-2-methylcyclopentanol (as a racemate), as drawn in (a).

Teacher's Note: Syn H/OH addition makes CH3 and OH trans on the ring.

Exam Note: OH on the less substituted carbon, syn to H.

Question 99. CH3–CH=CH2 →(1) THF : BD3; (2) CH3CO2T (A). Product (A) of the above reaction is: (a) CH3–CHD–CH2D; (b) CH3–CHT–CH2T; (c) CH3–CHD–CH2T; (d) CH3–CHT–CH2D.

Solution. Answer (from key): (c). In hydroboration B goes to the terminal carbon and D goes to C-2, giving CH3–CHD–CH2–B<. Protonolysis with the tritiated acid CH3CO2T replaces B by T (retention), giving CH3–CHD–CH2T.

Teacher's Note: B marks the terminal carbon: D goes on C-2, T replaces B.

Exam Note: Track D with hydroboration, T with protonolysis.

Question 100. Optically active isomer (A) of C5H9Cl on treatment with one mole of H2 gives an optically inactive compound (B). Compound (A) will be: (a) CH3–CH(CH2Cl)–CH=CH2; (b) Cl–CH(CH3)–CH=CH–CH3 (drawn); (c) CH3–CH(Cl)–CH2–CH=CH2; (d) CH3CH2–CH(Cl)–CH=CH2.

Solution. Answer (from key): (d). 3-Chloropent-1-ene, CH3CH2CHCl–CH=CH2, is chiral (C-3 has four different groups). Hydrogenation gives 3-chloropentane, CH3CH2CHClCH2CH3, which has two identical ethyl groups on C-3 and is achiral.

Teacher's Note: Hydrogenating the vinyl group can make two groups identical, removing chirality.

Exam Note: Check which stereocentre loses its chirality.

Question 101. An organic compound C4H6 on ozonolysis gives HCHO, CO2 and CH3CHO. The compound will be: (a) H2C=CH–CH=CH2; (b) CH3–CH=C=CH2; (c) CH3–C≡C–CH3; (d) cyclobutene.

Solution. Answer (from key): (b). The allene CH3–CH=C=CH2 has two C=C bonds sharing the central carbon. Cleaving them gives CH3CHO from one end, HCHO from the other end, and the central carbon as CO2. Buta-1,3-diene would give 2 HCHO and a dialdehyde instead.

Teacher's Note: The central carbon of an allene leaves as CO2 on ozonolysis.

Exam Note: Three products point to an allene.

Question 102. Methylenecyclohexane (a ring with an exocyclic C=CH2) →(HCHO, H+, H2O) major product of this reaction is: [Options (a)-(d) are drawn hydroxy-substituted cyclohexanes.]

Solution. Answer (from key): (b). This is a Prins-type reaction: protonated formaldehyde is attacked by the alkene to form a tertiary carbocation, which is trapped by water. The key gives (b) as the resulting hydroxy product. (The substrate is a skeletal drawing; please check this item against the book.)

Teacher's Note: Prins reaction: protonated HCHO adds to the alkene; water traps the cation.

Exam Note: Name the reaction: Prins.

Question 103. A branched precursor (CH3)2CH–… (drawn with OH groups) →(KMnO4) (A) →(H+, Δ) (B) →(HBr, ROOR) (C). Product (C) in the above reactions is: (a) (CH3)2CH–Br; (b) (CH3)3C–Br; (c) CH3–CH2–CH2Br-type bromide (drawn); (d) (CH3)2CH–CH2–Br.

Solution. Answer (from key): (d). The key gives (d). HBr with ROOR adds anti-Markovnikov to the alkene (B), putting Br on the terminal carbon, giving isobutyl bromide, (CH3)2CH–CH2Br. (The first reagent line of the question is only partly legible in the scan; please check this item.)

Teacher's Note: HBr plus peroxide puts Br on the terminal carbon of the alkene.

Exam Note: Peroxides mean anti-Markovnikov.

Question 104. (CH3)2C=CH2 + (CH3)2CHCH3 →(HF, 273 K) C8H18 (A). Unknown (A) in the above reaction is: (a) 2,2,3-trimethylpentane; (b) 2,2,4-trimethylpentane; (c) 2,2-dimethylhexane; (d) n-octane.

Solution. Answer (from key): (b). Alkylation: HF protonates isobutene to the tert-butyl cation, which adds to a second isobutene to give a C8 cation; hydride transfer from isobutane gives (CH3)3C–CH2–CH(CH3)2, 2,2,4-trimethylpentane (isooctane).

Teacher's Note: tert-Butyl cation adds to isobutene; hydride transfer from isobutane gives isooctane.

Exam Note: Name it: isooctane, from alkylation.

Question 105. CH2=C(OH)Cl (the enol of acetyl chloride) →(Br2) HBr + (P) →(MeOH) (Q). Product (Q) is: (a) CH3O–CH2–COCl; (b) Br–CH2–CO–OMe; (c) CH3–CO–OMe; (d) CH3–CH2–CO–OMe-type isomer.

Solution. Answer (from key): (b). Br2 reacts at the enol C=C (electrophilic bromination), giving HBr and BrCH2–COCl (P) (alpha-bromination). Methanol then converts the acid chloride to the methyl ester, giving BrCH2–CO–OCH3 (Q).

Teacher's Note: Enol bromination gives the α-bromo acid chloride; MeOH makes the ester.

Exam Note: Br goes on the α-carbon, OMe replaces Cl.

Question 106. 2-Methylcyclohexanol →(H+, Δ) (A) →(cold dil. KMnO4) (B) →(CrO3) (C). Product (C) of the reaction is: [Options (a)-(d) are drawn: (a) a diketone, (b) a methylcyclohexenone, (c) 2-hydroxy-2-methylcyclohexanone, (d) a ketoaldehyde.]

Solution. Answer (from key): (c). Dehydration gives the more substituted alkene 1-methylcyclohexene (A). Cold dilute KMnO4 forms the cis-1-methylcyclohexane-1,2-diol (B). CrO3 oxidises the secondary alcohol (but not the tertiary one) to a ketone, giving 2-hydroxy-2-methylcyclohexanone (C).

Teacher's Note: Saytzeff alkene, cis diol, then CrO3 oxidises only the secondary OH.

Exam Note: Tertiary alcohols resist oxidation.

Question 107. What is the major product expected from the reaction of 1-methylcyclobutene with D–Cl? [Options (a)-(d) are drawn deuterio-chloro-methylcyclobutanes.]

Solution. Answer (from key): (b). D+ adds to the less substituted C=C carbon to give the tertiary cyclobutyl cation, and Cl− adds to that carbon. The product is 1-chloro-1-methylcyclobutane with D on C-2, as drawn in (b).

Teacher's Note: Markovnikov: D adds to the CH carbon, Cl to the tertiary carbon.

Exam Note: Cation stability decides the Cl position.

Question 108. Choose the correct product of the reaction of 1-ethylcyclohexene with 1. Br2, 2. H2O. [Options (a)-(d) are drawn bromo-ethylcyclohexane/bromohydrin structures.]

Solution. Answer (from key): (b). Br2 forms a bromonium ion and water attacks it from the opposite face at the more substituted carbon. The product is the trans bromohydrin with OH and the ethyl group on the same carbon and Br on the adjacent carbon, option (b).

Teacher's Note: Water opens the bromonium ion anti, at the tertiary carbon.

Exam Note: OH on the tertiary carbon, trans to Br.

Question 109. 1-Methylcyclohexene →(1. BH3/THF; 2. H2O2/OH−) A. Product A is: [Options: (a) a 2-methylcyclohexanol with H hashed on C-1 and OH wedged (H and OH anti); (b) an allylic alcohol; (c) 1-methylcyclohexanol; (d) 2-methylcyclohexanol with H hashed on C-1 and OH hashed on C-2 (syn).]

Solution. Answer (from key): (d). Hydroboration-oxidation is an anti-Markovnikov, syn addition of H and OH. OH goes to C-2 and H to C-1 on the same face, so CH3 and OH end up trans: trans-2-methylcyclohexanol, drawn in (d). Option (a) shows H and OH anti, which would need anti addition.

Teacher's Note: Syn H/OH addition gives trans-2-methylcyclohexanol.

Exam Note: Check wedge/hash: H and OH syn.

Question 110. 1-Methylcyclohexene →(1. Hg(OAc)2, H2O; 2. NaBH4) Product; Product is: [Options: (a) 2-methylcyclohexanol (H hashed, OH wedge); (b) an allylic alcohol; (c) a C(OH)(CH3) ring with a second methyl; (d) 2-methylcyclohexanol with OH hashed.]

Solution. Corrected: The printed key gives (d), but oxymercuration-demercuration adds H2O in the Markovnikov sense, so OH goes to the more substituted carbon: the product is 1-methylcyclohexan-1-ol (a tertiary alcohol, achiral). None of the drawn options shows exactly this; option (d) is the anti-Markovnikov alcohol made by hydroboration in Q109.

Teacher's Note: Oxymercuration is Markovnikov: OH on the tertiary carbon, no stereocentre.

Exam Note: Markovnikov hydration without rearrangement.

Question 111. Choose the correct product of the following reactions: 1,2-dimethylcyclopentene →(1. MCPBA; 2. H3O+). [Options (a)-(d) are drawn diols and an alcohol.]

Solution. Answer (from key): (c). MCPBA gives the epoxide. In acid, water attacks from the back side, so the two OH groups end up trans: trans-1,2-dimethylcyclopentane-1,2-diol (as a racemate), option (c).

Teacher's Note: Epoxide plus H3O+ gives the trans diol (anti hydroxylation).

Exam Note: Backside opening gives trans.

Question 112. How many stereoisomeric tetrabromides will be formed in the following reaction: hexa-1,5-diene + 2 Br2/CCl4? (a) 2; (b) 3; (c) 4; (d) 6.

Solution. Answer (from key): (b). The product is 1,2,5,6-tetrabromohexane, BrCH2CHBr–CH2CH2–CHBrCH2Br. It has two identical stereocentres (C-2 and C-5), so there are three stereoisomers: (R,R), (S,S) and the meso (R,S) form.

Teacher's Note: Two identical stereocentres give three stereoisomers (R,R; S,S; meso).

Exam Note: Symmetric molecule: use 2n minus meso adjustment.

Question 113. How many stereoisomeric pentabromides will be formed in the following reaction: 2-bromohexa-1,5-diene (CH2=CBr–CH2CH2–CH=CH2) + 2 Br2/CCl4? (a) 2; (b) 3; (c) 4; (d) None of these.

Solution. Answer (from key): (a). The product is 1,2,2,5,6-pentabromohexane, BrCH2–CBr2–CH2CH2–CHBr–CH2Br. Only C-5 is a stereocentre (C-2 carries two Br), so there are two stereoisomers (an enantiomeric pair).

Teacher's Note: Only one stereocentre (C-5) forms, so one enantiomer pair.

Exam Note: C-2 carries two Br, so it is not a stereocentre.

Question 114. 1-Butene →(HCl, peroxide) (A) →(EtONa, Δ) (Z) (major). Identify (Z) in the above sequence of reactions: (a) 1-butene; (b) 2-butene; (c) an ether (drawn); (d) an ether with CH3/OEt (drawn).

Solution. Answer (from key): (b). HCl shows no peroxide effect, so addition is Markovnikov and gives 2-chlorobutane (A). Sodium ethoxide on heating causes E2 elimination, giving the more substituted (Saytzeff) alkene 2-butene as the major product (Z).

Teacher's Note: HCl shows no peroxide effect; E2 with ethoxide gives the Saytzeff alkene.

Exam Note: Peroxide effect applies to HBr only.

Question 115. CH3–CH(CO2K)–CH(CO2K)–CH3 →(electrolysis) (A) (major). Major product (A) of the above reaction: (a) CH2=CH–CH2–CH3-type alkene (drawn); (b) bicyclic cyclobutane drawn; (c) 2-butene (CH3–CH=CH–CH3); (d) another drawn cyclobutane.

Solution. Answer (from key): (c). Kolbe electrolysis of the dipotassium salt of a succinic-acid derivative loses 2 CO2 and forms a C=C bond between the two carbons that carried CO2K: CH3–CH=CH–CH3 (2-butene).

Teacher's Note: Dicarboxylate Kolbe gives an alkene between the two carbons that carried CO2K.

Exam Note: Remove both CO2K, join the carbons by C=C.

Question 116. (Epoxy-alkene: oxiranyl–CH=CH2, only one enantiomer taken) + CF3CO3H → (A) + (B), the two bis-epoxides. Which of the following statements is correct about A and B? (a) A and B are a mixture of diastereomers; (b) A and B are a mixture of enantiomers; (c) A and B are optically active; (d) B is a racemic mixture.

Solution. Answer (from key): (a). The new epoxide creates a new stereocentre next to the existing one in the single enantiomer. The two products have the same constitution but are not mirror images (one stereocentre is fixed, the other is new), so they are diastereomers.

Teacher's Note: Fixed stereocentre plus a new one gives diastereomers, not enantiomers.

Exam Note: State: diastereomers, since one centre is unchanged.

Question 117. An aryl ether of a glyceraldehyde-type 2-hydroxy-aldehyde (CH3O–C6H3(CH3)–O–CH(CHO)…) →(NaBH4) A →(O3) B →(H2O) (C) (one of the products). Identify the product (C): (a) CH3–CO–CO–O–CH3; (b) glycerol, HOCH2–CH(OH)–CH2OH; (c) 2,3-dihydroxypropanal; (d) mesoxalaldehyde-type dialdehyde.

Solution. Answer (from key): (b). The key gives (b). NaBH4 reduces the aldehydes to alcohols; ozonolysis cleaves the electron-rich aromatic ring and water work-up releases the polyol fragment, glycerol. (The substrate drawing is partly illegible in the scan; please check this item.)

Teacher's Note: NaBH4 reduces CHO to CH2OH; ozone cleaves the ring, releasing the polyol.

Exam Note: Reduce first, then cleave.

Question 118. Salicylaldehyde (2-hydroxybenzaldehyde) →(HO−) (X) →(CH2=CH–P+Ph3Br−) (Y). Product (Y) of the above reaction is: (a) 2,3-dihydrobenzofuran; (b) 2H-chromene (2H-1-benzopyran); (c) 2-hydroxy-1-propenylbenzene; (d) an allylic alcohol (drawn).

Solution. Answer (from key): (b). HO− forms the phenoxide (X). The phenoxide adds to the vinylphosphonium salt (Michael addition), giving an ylide that does an intramolecular Wittig reaction with the CHO group, closing the six-membered ring to 2H-chromene (Y).

Teacher's Note: Michael addition of phenoxide, then intramolecular Wittig, closes a pyran ring.

Exam Note: Ylide plus CHO gives the ring C=C.

Question 119. In the reaction Me–C≡C–Et →(Na/liq. NH3) P →(Br2/CCl4) (Q); then Q is: (a) a pure compound which is optically inactive due to internal compensation; (b) a binary mixture which is optically inactive due to external compensation; (c) a binary mixture which is optically active; (d) a pure compound which is optically inactive due to absence of chiral centre.

Solution. Answer (from key): (b). Na/liq. NH3 gives trans-2-hexene (P). Anti addition of Br2 to the trans alkene gives (2R,3R)- and (2S,3S)-2,3-dibromohexane in equal amounts: a racemic mixture, optically inactive by external compensation. (The compound is not meso because the two ends differ.)

Teacher's Note: Trans alkene plus anti Br2 gives a racemate (external compensation).

Exam Note: Unsymmetrical alkene: racemate, not meso.

Question 120. A macrocyclic polyene with four labelled π bonds a, b, c, d (a: a disubstituted alkene in the ring; b: a trisubstituted-type alkene at the ring junction; c: a ring alkene; d: a terminal 1,1-disubstituted C=CH2 alkene). Which (π-bond) will reduce first when the above compound undergoes catalytic hydrogenation? (a) a; (b) b; (c) c; (d) d.

Solution. Answer (from key): (d). In catalytic hydrogenation the least hindered, least substituted C=C adsorbs on the catalyst most easily and reacts first. The terminal =CH2 alkene (d) is the least hindered double bond.

Teacher's Note: Least hindered, least substituted C=C hydrogenates first.

Exam Note: Rank alkenes by steric hindrance at the catalyst.

Question 121. Compound A, a degradation product of the antibiotic vermiculine, has the structure: a methyl ketone, CH3–CO–CH=CH–CH2…–C(=O)–CH=CH–CO2CH3-type chain (C11H14O4). (A) →(H2, Pd/C) (B) (C11H18O4) ←((CH3)2S) ←(O3, CH2Cl2) (C) (C11H18O2). Unknown (C) is: [Options (a)-(d) are drawn polyene methyl esters; (b) has an isopropenyl-type C=CH2 at the far end and a C=CH2 branch in the chain.]

Solution. Answer (from key): (b). The key gives (b). Ozonolysis of (C) with dimethyl sulfide cleaves its C=C bonds to give the carbonyl compound (B), which contains the ketone and ester groups of the chain; (C) is the diene ester drawn in (b). (The long skeletal structures are partly illegible; please check this item against the book.)

Teacher's Note: Ozonolysis converts each C=CH2 end into a ketone: work backwards from B.

Exam Note: Rebuild C by turning each C=O back into C=CH2.

Question 122. 4-Isopropenyl-1-methylcyclohexene (limonene) →(A) the ring epoxide →(B) the ring epoxide with the isopropenyl group converted into a methyl ketone (CH3–C=O). Reagents (A) and (B) are: (a) A = RCO3H, B = H2O2; (b) A = RCO3H, B = HIO4; (c) A = RCO3H, B = O3; (d) A = O3, B = RCO3H.

Solution. Answer (from key): (c). A peracid epoxidises the more electron-rich trisubstituted ring C=C selectively, giving the ring epoxide (A). O3 then cleaves the remaining isopropenyl C=CH2 to the methyl ketone (B). The order matters: O3 first would cleave both double bonds.

Teacher's Note: Peracid epoxidises the more substituted C=C first; ozone then cleaves the remaining one.

Exam Note: Order matters: epoxidise, then ozonolyse.

Question 123. Rank the following in the increasing order of rate of reaction with HBr: (P) a dihydropyran-type ring enol ether (ring O next to the C=C, with a CH3 on the alkene); (Q) 1-methylcyclohexene; (R) the ring enamine-type analogue with N (ring NH next to the C=C). (a) R > P > Q; (b) R > Q > P; (c) P > R > S; (d) P > S > R.

Solution. Answer (from key): (a). The key gives R > P > Q. Lone-pair donation from the heteroatom makes the C=C more nucleophilic and stabilises the cation after protonation: N is a better donor than O, and both are better than an alkyl group alone. (The printed question says 'increasing' but the key option is written in decreasing order of rate.)

Teacher's Note: A lone pair on the heteroatom stabilises the cation: N is stronger than O.

Exam Note: Rank by donor strength: N above O above alkyl.

Question 124. Select the reaction(s) that would result in the formation of 2-bromopropane. (I) CH3CH=CH2 + HBr (peroxide); (II) CH3CH=CH2 + HBr (CCl4); (III) CH3CH2CH3 + Br2 (hν); (IV) CH3CH=CH2 + Br2 (CCl4). (a) I and III; (b) II and III; (c) I, II and III; (d) I, II and IV.

Solution. Answer (from key): (b). (II) is Markovnikov addition of HBr and gives 2-bromopropane. (III) radical bromination is highly selective for the weaker secondary C–H and gives 2-bromopropane as the major product. (I) gives 1-bromopropane (peroxide effect) and (IV) gives 1,2-dibromopropane.

Teacher's Note: Markovnikov HBr and selective radical bromination both give the 2° bromide.

Exam Note: Bromination is selective: 2° over 1° H.

Question 125. Which of the following reactions generates the major product? Ignore stereoisomerism. (a) methylenecyclohexane-type alkene + HBr → a secondary bromide; (b) 1-methylcyclohexene + Hg(OAc)2, H2O, THF; NaBH4 → 2-methylcyclohexanol (as drawn); (c) 1-methylcyclohexene + BH3, then OH−/H2O2 → 1-methylcyclohexanol (as drawn); (d) 1-methylcyclohexene + H2O, H2SO4 → 1-methylcyclohexanol; (e) 1-methylcyclohexene + Br2/CCl4 → a geminal dibromide (as drawn).

Solution. Answer (from key): (d). Acid-catalysed hydration is Markovnikov and gives the tertiary alcohol 1-methylcyclohexanol, which is what (d) shows. The others show wrong regiochemistry: oxymercuration (b) should give the tertiary alcohol, hydroboration (c) should give the 2-substituted (trans) alcohol, HBr (a) should give the tertiary bromide, and Br2 (e) gives the vicinal (not geminal) dibromide.

Teacher's Note: Markovnikov hydration gives the tertiary alcohol; check each product against its rule.

Exam Note: Match each reagent to its regiochemistry.

Question 126. In the given selective hydrogenation which combination is incorrect? (a) limonene (ring trisubstituted C=C and isopropenyl C=CH2) + H2, Wilkinson's catalyst (W.C.) giving the product with the ring C=C reduced and the isopropenyl intact; (b) a triene with H2/W.C. reducing the terminal C=C; (c) a bicyclic alkene + H2/W.C. reducing the less hindered C=C; (d) a diene + H2, Δ giving CH3–CH=CH–CH3-type product.

Solution. Answer (from key): (a). Wilkinson's catalyst is highly sensitive to steric hindrance and reduces the least hindered C=C first. In limonene it should reduce the terminal isopropenyl C=CH2 and leave the more substituted ring C=C, so the product drawn in (a) (ring C=C reduced) is incorrect.

Teacher's Note: Wilkinson's catalyst reduces the least hindered C=C first.

Exam Note: Rank alkenes by steric hindrance.

Question 127. Phenylacetylene (Ph–C≡CH) →(1. NaNH2; 2. cyclohexyl tosylate (TsO–C6H11)) (A) →(Na/NH3(l)) (B) →(MCPBA) (C). Compound (C) in the above sequence of reactions is: [Options (a)-(d): (a) cis-epoxide with H, H on the same side; (b) trans-epoxide with H, H on opposite sides; (c) phenyl cyclohexyl ketone; (d) benzyl cyclohexyl ketone.]

Solution. Answer (from key): (b). The acetylide displaces tosylate to give Ph–C≡C–C6H11 (A). Na/NH3 reduces it to the trans alkene (B). MCPBA epoxidises with retention of geometry, so the product (C) is the trans-epoxide, option (b).

Teacher's Note: Na/NH3 gives trans; epoxidation retains geometry, so the epoxide is trans.

Exam Note: Track alkene geometry through each step.

Question 128. A bicyclic cyclobutene with a CH3 on one alkene carbon (a cyclohexane fused to a methyl-substituted cyclobutene) →(HBr, R2O2/hν) (A). Major product (A) is: [Options (a)-(d) are drawn bromides.]

Solution. Answer (from key): (c). With peroxide, HBr adds by the radical (anti-Markovnikov) route: Br• adds to the less substituted alkene carbon to give the more stable tertiary radical on the carbon bearing CH3, which then abstracts H. The product has Br on the carbon without CH3, option (c).

Teacher's Note: Peroxide effect: Br on the less substituted carbon, radical on the more substituted.

Exam Note: Anti-Markovnikov: Br on the carbon without CH3.

Question 129. In the reaction CH3–CH=CH–CH3 →(H3O+) CH3–CH2–CH(OH)–CH3, the product would be: (a) a mixture of diastereomers; (b) optically active; (c) optically pure enantiomer; (d) a racemic mixture.

Solution. Answer (from key): (d). Protonation gives the planar secondary carbocation, and water attacks it from either face with equal probability. The product, butan-2-ol, has one stereocentre and forms as an equal mixture of (R) and (S): racemic.

Teacher's Note: A planar carbocation is attacked from both faces: racemate.

Exam Note: One stereocentre from a planar cation means racemic.

Question 130. Surprisingly, the following reaction goes through a classical carbocation. What is the major product of this reaction: (R)-3-bromocyclohexene (Br on a wedge) + HBr → ? (a) trans-1,3-dibromocyclohexane; (b) cis-1,3-dibromocyclohexane; (c) trans-1,2-dibromocyclohexane; (d) cis-1,2-dibromocyclohexane.

Solution. Answer (from key): (a). H+ adds to the C=C at C-2 to give the carbocation at C-1, which is 1,3 to the existing Br (a classical, not bridged, cation). Br− then adds at C-1 and the key gives the trans-1,3-dibromide as the major product.

Teacher's Note: A classical cation, not a bridged bromonium, so Br adds 1,3 to the old Br.

Exam Note: Put H on C-2, Br− on C-1.

Question 131. The major product of the reaction pent-4-en-1-ol + Br2/H2O is: (i), (ii) two drawn enantiomeric bromohydrins with a Br on C-4 and OH on C-5 (acyclic diols); (iii), (iv) two drawn bromohydrin isomers; (v), (vi) the two enantiomers of 2-(bromomethyl)tetrahydrofuran. (a) (i) and (ii); (b) (iii) and (iv); (c) (v) and (vi); (d) none of these.

Solution. Answer (from key): (c). Br2 forms a bromonium ion on the C=C. The internal OH group (four carbons away) attacks the more substituted carbon intramolecularly, closing a five-membered ring: 2-(bromomethyl)tetrahydrofuran. It forms as both enantiomers, (v) and (vi), because attack occurs on either face.

Teacher's Note: Internal OH is the better nucleophile than water: a five-membered cyclic ether forms.

Exam Note: Intramolecular attack gives the five-membered ring.

Question 132. Which reaction will occur at the fastest rate? (a) cyclohexene + HBr → bromocyclohexane; (b) a 1,1-disubstituted alkene + HBr → a secondary-type bromide (anti-Markovnikov drawn); (c) cyclohexene (second drawn form) + HBr → bromocyclohexane; (d) 2-methyl-2-butene-type (trisubstituted) alkene + HBr → the tertiary bromide.

Solution. Answer (from key): (d). The rate of HBr addition depends on the stability of the carbocation formed in the rate-determining protonation. The alkene in (d) forms a tertiary carbocation, which is more stable than a secondary one, so (d) is fastest.

Teacher's Note: Rate depends on the carbocation formed: tertiary is fastest.

Exam Note: Compare the carbocations formed.

Question 133. Chlorobenzene + Na (dry ether) → biphenyl. The above reaction is known as: (a) Wurtz reaction; (b) Wurtz-Fittig reaction; (c) Fittig reaction; (d) Kolbe electrolysis.

Solution. Answer (from key): (c). Coupling of two aryl halide molecules with sodium in dry ether is the Fittig reaction. The Wurtz reaction couples two alkyl halides and the Wurtz-Fittig reaction couples an aryl halide with an alkyl halide.

Teacher's Note: Aryl–aryl coupling with Na is Fittig; aryl–alkyl is Wurtz-Fittig.

Exam Note: Match the halide types to the named reaction.

Question 134. CH3–CH2–CHO →(red P + HI) A. Product A is: (a) propane; (b) propanol; (c) propanoic acid; (d) propene.

Solution. Answer (from key): (a). Red phosphorus with HI is a powerful reducing agent that reduces the CHO group completely to CH3, giving propane, CH3CH2CH3.

Teacher's Note: Red P/HI reduces carbonyl and similar groups all the way to the alkane.

Exam Note: Complete reduction to the alkane.

Question 135. Which of the following compounds gives diastereomers when treated with Br2 in CCl4? (a) methylenecyclopentane; (b) 1-methylcyclopentene; (c) 3-methylcyclopentene; (d) 4-methylcyclopentene.

Solution. Answer (from key): (d). The key gives (d). Br2 adds anti to 4-methylcyclopentene from the face syn or anti to the methyl group. These two modes of attack give two different dibromides, which are diastereomers of each other (the CH3 is cis to the Br pair or trans to it). The compounds in (a) and (b) give products without a stereocentre pair that can be diastereomeric.

Teacher's Note: Two faces of the ring relative to the CH3 give two diastereomeric dibromides.

Exam Note: Attack syn or anti to CH3 gives different products.

Question 136. A mixture of C2H6, C2H4 and C2H2 is bubbled through alkaline solution of copper(I) chloride, contained in a Woulf's bottle. The gas coming out is: (a) original mixture; (b) C2H6; (c) C2H6 and C2H4 mixture; (d) C2H4 and C2H2.

Solution. Answer (from key): (c). Ethyne, a terminal alkyne with an acidic C–H, is removed as red copper(I) acetylide. Ethane and ethene do not react, so the gas coming out is a mixture of C2H6 and C2H4.

Teacher's Note: Only the terminal alkyne forms the copper acetylide and is absorbed.

Exam Note: Terminal alkynes are removed by Cu(I).

Question 137. A branched secondary alcohol (3-methylbutan-2-ol, (CH3)2CH–CH(OH)–CH3) →(H+, Δ) possible products (x) →(Br2/CCl4) (y) products. The number of possible products for x and y is: (a) 2, 4; (b) 3, 5; (c) 3, 6; (d) 3, 4.

Solution. Answer (from key): (b). The key gives x = 3, y = 5. Dehydration (E1, with a hydride shift) can give three alkenes: 3-methylbut-1-ene, 2-methylbut-2-ene and 2-methylbut-1-ene. Adding Br2 to these gives five products, counting the stereoisomers formed. (This count follows the key; please check this item.)

Teacher's Note: Count alkenes after E1 with hydride shift, then add the stereoisomers of each dibromide.

Exam Note: List each alkene, then its dibromide stereoisomers.

Question 138. Select the incorrect statement: (a) Bromine is more selective and less reactive; (b) Chlorine is less selective and more reactive; (c) Benzyl free radical is more stable than 2° free radical; (d) Vinyl free radical more stable than allyl free radical.

Solution. Answer (from key): (d). Statements (a), (b) and (c) are correct: Br• is less reactive and more selective than Cl•, and the benzyl radical is resonance stabilised, more stable than a secondary alkyl radical. The allyl radical is stabilised by resonance, whereas the vinyl radical is not (it is a high-energy sp2 radical), so (d) is incorrect.

Teacher's Note: Resonance-stabilised radicals (allyl, benzyl) beat vinyl, which has no stabilisation.

Exam Note: Radical stability: benzyl > allyl > 3° > 2° > vinyl.

Question 139. Which of the following compounds does not evolve CO2 gas when undergoing oxidative ozonolysis? (a) methylenecyclohexane; (b) isopropenylcyclohexane-type (a ring carrying a C(CH3)=CH2); (c) H2C=CH–CH=CH2; (d) cyclohexene.

Solution. Answer (from key): (d). A terminal =CH2 group is oxidised first to HCHO and then to CO2 in oxidative work-up, so (a), (b) and (c) evolve CO2. Cyclohexene has no =CH2 carbon; it gives adipic acid, with no CO2.

Teacher's Note: Only a terminal =CH2 is oxidised all the way to CO2.

Exam Note: Look for =CH2 groups.

Question 140. cis-3-Hexene →(a) meso-3,4-hexanediol; trans-3-hexene →(b) meso-3,4-hexanediol. Choose the pair of reagents (a, b) for the above conversions: (a) cold KMnO4, OsO4; (b) cold KMnO4, RCO3H/H3O+; (c) RCO3H/H3O+, cold KMnO4; (d) None of these.

Solution. Answer (from key): (b). The cis alkene gives the meso diol by syn addition (cold KMnO4 or OsO4). The trans alkene gives the meso diol by anti addition: epoxidation with RCO3H followed by ring opening with H3O+. So a = cold KMnO4, b = RCO3H/H3O+.

Teacher's Note: Syn on cis gives meso; anti on trans gives meso: choose syn for a, anti for b.

Exam Note: Match syn/anti hydroxylation to the geometry.

Question 141. Benzene →(Na, liq. NH3) (A) →(O3, Zn) (B) →(Ph3P=CH2, 2 mole) (C). Product (C) of the above reaction is: (a) 1,3-hexadiene; (b) 1,4-pentadiene; (c) 1,3-butadiene; (d) 1,3-heptadiene.

Solution. Answer (from key): (b). Birch reduction gives cyclohexa-1,4-diene (A). Ozonolysis with Zn cleaves both C=C bonds to give 2 molecules of malonaldehyde, OHC–CH2–CHO (B). Each CHO is converted to =CH2 by the Wittig reagent; with 2 moles of ylide on one malonaldehyde the product is CH2=CH–CH2–CH=CH2, 1,4-pentadiene (C).

Teacher's Note: Birch gives the 1,4-diene; ozonolysis gives OHC–CH2–CHO; Wittig turns both CHO into =CH2.

Exam Note: Wittig converts C=O to C=CH2.

Question 142. How many carbon-hydrogen bond orbitals are available for overlap with the vacant p-orbital in ethyl carbocation? (a) 0; (b) 3; (c) 5; (d) 6.

Solution. Answer (from key): (b). In CH3–CH2+ the positive carbon is bonded to the CH3 group, whose three C–H bonds can overlap with the vacant p-orbital (hyperconjugation). The two C–H bonds on the cationic carbon lie in the plane and cannot overlap, so 3 is the answer.

Teacher's Note: Hyperconjugation counts only the α C–H bonds on the adjacent carbon: three.

Exam Note: Count the C–H bonds on the carbon next to C+.

Question 143. Bicyclohexyl-type conversion: a bicyclic compound (a cyclohexane ring joined to a cyclohexene ring) → cyclohexene (drawn). To achieve the above conversion, the reagents used will be: (a) O3/H2O2, HO−/Δ; (b) HBr, alc. KOH, O3, LiAlH4, H+/Δ; (c) HBr, t-BuOK, O3, KMnO4, Δ; (d) HCl, KMnO4 (cold), H+/Δ.

Solution. Answer (from key): (b). The key gives (b). The sequence adds HBr, eliminates with alcoholic KOH to move the C=C to the desired position, cleaves it with O3, reduces the product with LiAlH4 to the alcohol, and dehydrates it with H+/Δ to form the cyclohexene ring. (The question drawing is skeletal; please check this item.)

Teacher's Note: Move the C=C, cleave it by ozonolysis, reduce to alcohol, dehydrate to the ring alkene.

Exam Note: Each reagent has a defined role: plan the route.

Question 144. A cyclopentenone bearing an allyl side chain (4-allylcyclopent-2-en-1-one) →(Hg(OAc)2, AcOH) X (major). Product (X) is: [Options (a)-(d) are drawn: (a) HgOAc on the internal carbon and OAc terminal, (b) OAc on the internal carbon and HgOAc on the terminal carbon, (c) alcohol, (d) diol.]

Solution. Answer (from key): (b). Oxymercuration is Markovnikov: acetate (the nucleophile) attacks the more substituted carbon of the mercurinium ion, and Hg ends up on the terminal carbon. The electron-poor enone C=C does not react, so only the allyl C=C reacts. Option (b) shows OAc on the internal carbon and HgOAc on the CH2.

Teacher's Note: Nucleophile OAc goes to the more substituted carbon; Hg to the terminal carbon.

Exam Note: The electron-poor enone C=C is unreactive.

Question 145. Decreasing order of heat evolved upon catalytic hydrogenation (H2, Pd/C) of the given reactants is: (a) a 4-substituted cyclohexene (disubstituted ring C=C); (b) 1,2-dimethylcyclohexene (tetrasubstituted); (c) a trisubstituted cyclohexene; (d) an exocyclic isopropylidene-type / methylenecyclohexane (the least stable). (Options: (a) b > c > a > d; (b) d > a > c > b; (c) d > c > a > b; (d) c > b > c > d.)

Solution. Answer (from key): (b). The heat of hydrogenation is larger for the less stable alkene. The stability of an alkene increases with the number of alkyl substituents on the C=C, so the order of decreasing heat evolved is d > a > c > b.

Teacher's Note: Less substituted alkene is less stable, so it gives off more heat on hydrogenation.

Exam Note: Rank alkenes by substitution.

Question 146. The correct order of heat of hydrogenation of the given molecules (a)-(d) (four isomeric heptenes/hexenes drawn: (a) a disubstituted E alkene, (b) a disubstituted Z-type alkene, (c) a terminal alkene, (d) a more substituted alkene) is: (a) d > c > a > b; (b) d > c > b > a; (c) b > a > c > d; (d) d > a > c > b.

Solution. Answer (from key): (c). The key gives b > a > c > d. A less stable alkene (terminal, cis and disubstituted) evolves more heat on hydrogenation, and the more highly substituted alkene (d) evolves the least. (The drawn alkenes are skeletal; please check this item.)

Teacher's Note: The less stable alkene has the higher heat of hydrogenation.

Exam Note: Order: cis > trans > more substituted.

Question 147. 6-Methylhept-6-en-1-ol-type alkenol (a chain with a terminal C(CH3)=CH2 and a terminal OH) →(1. Hg(OAc)2; 2. NaBH4) A. Product (A) of the above reaction is: [Options (a)-(d) are drawn cyclic ethers (tetrahydropyrans).]

Solution. Answer (from key): (b). Intramolecular oxymercuration: the internal OH attacks the more substituted carbon of the mercurinium ion, closing a six-membered ring (a tetrahydropyran) with a gem-dimethyl group at the carbon attached to O. NaBH4 replaces HgOAc by H. The product is a 2,2-dimethyltetrahydropyran, as in (b).

Teacher's Note: Internal OH attacks the more substituted carbon: a six-membered cyclic ether forms.

Exam Note: Intramolecular oxymercuration gives a cyclic ether.

Question 148. Isopropenylcyclobutane (a cyclobutane ring bearing a C(CH3)=CH2 group) + HBr → A (major). Product (A) is: [Options (a)-(d) are drawn bromides: (a) a ring-expanded methylcyclopentyl tertiary bromide, (b) a different cyclopentyl bromide, (c) a cyclohexyl bromide, (d) a bromomethyl compound.]

Solution. Answer (from key): (a). H+ adds to the CH2, giving the tertiary cation next to the strained four-membered ring. A ring expansion (alkyl shift) relieves strain and gives a tertiary cyclopentyl cation, to which Br− adds. The product is the ring-expanded tertiary bromide, drawn in (a).

Teacher's Note: Cation next to a cyclobutane: ring expansion relieves strain and keeps a 3° cation.

Exam Note: Ring expansion from four to five carbons.

Question 149. Cyclobutene (a four-membered ring with one C=C) →(HBr, CCl4) Product; comment upon optical activity of the product. (a) Racemic mixture; (b) Diastereomers; (c) Meso; (d) Optically inactive due to absence of chiral centre.

Solution. Answer (from key): (d). HBr adds across the symmetrical C=C of cyclobutene to give bromocyclobutane. This has only one substituent on the ring, so it has no stereocentre and is optically inactive.

Teacher's Note: A single substituent on a symmetric ring gives no stereocentre.

Exam Note: No stereocentre, so no optical activity.

Question 150. (CH3)2C=CH–CH3 →(Hg(OAc)2/EtOH) (A) (90%). Product (A) of the above reaction is: (a) (CH3)2C(HgOAc)–CH(OEt)–CH3; (b) (CH3)2C(OEt)–CH(HgOAc)–CH3; (c) (CH3)2C(OH)–CH(HgOAc)–CH3; (d) (CH3)2C(HgOAc)–CH(OH)–CH3.

Solution. Answer (from key): (b). Alkoxymercuration is Markovnikov: the nucleophile (EtOH, the solvent) attacks the more substituted carbon (C-2) of the mercurinium ion, and Hg ends up on the less substituted carbon (C-3). The product is (CH3)2C(OEt)–CH(HgOAc)–CH3.

Teacher's Note: Solvent EtOH is the nucleophile and attacks the more substituted carbon.

Exam Note: OEt on the tertiary carbon; Hg on the secondary.

Question 151. Me2CH–CH(OH)–Me →(Al2O3, 350°C) (A) →(i) HI, (ii) AgOH (B). Product (B) of the above reaction: (a) Me2C(OH)CH2Me; (b) Me2CH–CH(OH)–Me; (c) Me–CH(OH)–CMe3; (d) HO–CH2–(CH2)Me-type primary alcohol.

Solution. Answer (from key): (a). Dehydration over alumina gives the most substituted alkene, 2-methylbut-2-ene (A). HI adds by Markovnikov addition to give 2-iodo-2-methylbutane, and AgOH replaces I by OH to give the tertiary alcohol Me2C(OH)CH2Me, 2-methylbutan-2-ol (B).

Teacher's Note: Saytzeff alkene, Markovnikov HI, then OH replaces I: the tertiary alcohol.

Exam Note: Net effect: moves OH to the tertiary carbon.

Question 152. In which of the following reactions is Markovnikoff's rule violated? (a) CH3–O–CH=CH2 + HBr (CCl4); (b) CH3–NH–CH=CH2 + HBr (CCl4); (c) CH3–S–CH=CH2 + HBr (CCl4); (d) O2N–CH=CH2 + HBr (CCl4).

Solution. Answer (from key): (d). In (a), (b) and (c) the heteroatom (O, N, S) donates its lone pair and stabilises the cation on the carbon next to it, so H adds to the CH2 (Markovnikov). The NO2 group is strongly electron-withdrawing and destabilises a cation next to it, so H adds to the carbon bearing NO2, giving the anti-Markovnikov product.

Teacher's Note: Electron-withdrawing groups reverse the orientation by destabilising the adjacent cation.

Exam Note: Donor groups follow the rule; acceptors reverse it.

Question 153. Decreasing order of rate of reaction of molecules towards electrophilic addition reaction is: styrenes with a substituent at the para position: (a) NO2; (b) OH; (c) CH3; (d) NH2. (Options: (a) a > b > c > d; (b) b > c > a > d; (c) d > b > c > a; (d) b > d > c > a.)

Solution. Answer (from key): (c). Electrophilic addition goes through a benzylic carbocation, so the rate is higher when the ring substituent donates electrons more strongly. The order of donor strength is NH2 > OH > CH3, and NO2 is a withdrawing group and slows the reaction most. So d > b > c > a.

Teacher's Note: Rate follows benzylic cation stability: stronger donors react faster.

Exam Note: Rank substituents by donor strength.

Question 154. 2 CH3–C(Ph)=CH2 (α-methylstyrene) →(H–A (acid)) (A) (major). Product (A) is: [Options (a)-(d) are drawn: (a) a tetralin diphenyl derivative, (b) a spiro/fused tricycle, (c) 1,1,3-trimethyl-3-phenylindane, (d) a tetralin with Ph on a ring carbon.]

Solution. Answer (from key): (c). H+ adds to one α-methylstyrene to give the tertiary benzylic cation, which adds to a second molecule. The resulting tertiary benzylic cation attacks the aromatic ring of the first unit (Friedel-Crafts type cyclisation), forming the five-membered ring of 1,1,3-trimethyl-3-phenylindane, drawn in (c).

Teacher's Note: Dimerisation then intramolecular Friedel-Crafts ring closure gives the indane.

Exam Note: Five-membered ring closure gives indane.

Question 155. Tetrahydrofurfuryl alcohol (tetrahydrofuran-2-ylmethanol) →(H+, Δ) (A) →(ROH, H+) (B) (major). Product (B) of the above reaction is: [Options (a)-(d) are drawn alkoxy-tetrahydropyrans: (b) has OR on the carbon next to ring O.]

Solution. Answer (from key): (b). Acid and heat give the primary carbocation by loss of water, which rearranges by ring expansion to the more stable oxocarbenium ion, then loses H+ to give the cyclic enol ether 3,4-dihydro-2H-pyran (A). ROH/H+ adds to this enol ether by Markovnikov addition, giving the 2-alkoxytetrahydropyran acetal (B), option (b).

Teacher's Note: Ring expansion gives a dihydropyran; ROH/H+ then forms the acetal at C-2.

Exam Note: Enol ether plus ROH gives an acetal.

Question 156. Which of the following compounds gives the same carbocation on ionisation? (Four bromoalkenes drawn: 1 is a bromo-substituted tri-substituted alkene, 2 and 3 are allylic bromides with the same carbon skeleton, 4 is a different bromoalkene.) (a) 1 and 3; (b) 2 and 4; (c) 1 and 2; (d) 1 and 4.

Solution. Answer (from key): (c). Compounds 1 and 2 are allylic bromides that ionise to the same delocalised allyl cation (the same two resonance forms), since the Br leaves from either end of the same allyl system. Compounds 3 and 4 give different cations. (The four drawn structures are skeletal; please check this item.)

Teacher's Note: Allylic halides that share one allyl system ionise to the same cation.

Exam Note: Same resonance hybrid means same carbocation.

Question 157. For the following reactions the major products are shown: H2C=CH–CH=CH2 →(HBr, 0°C) H2C=CH–CH(Br)–CH3 →(+25°C) CH2(Br)–CH=CH–CH3. These provide an example of (1) ______ control at low temperature and (2) ______ control at higher temperature. (a) 1 kinetic, 2 thermodynamic; (b) 1 thermodynamic, 2 kinetic; (c) 1 kinetic, 2 kinetic; (d) 1 thermodynamic, 2 thermodynamic.

Solution. Answer (from key): (a). At low temperature the faster-forming 1,2-adduct (3-bromobut-1-ene) is the major product: kinetic control. At higher temperature the products equilibrate and the more stable 1,4-adduct (1-bromobut-2-ene, with a more substituted C=C) dominates: thermodynamic control.

Teacher's Note: Low T: fastest-formed (kinetic) 1,2-adduct; high T: most stable (thermodynamic) 1,4-adduct.

Exam Note: Kinetic at low temperature, thermodynamic when hot.

Step-by-Step MS Chauhan Solutions for JEE Math

Chapter-wise MS Chauhan Solutions: MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 4 b Hydrocarbons Alkanes Part 1

Explore reliable mathematical solutions for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 4 b Hydrocarbons Alkanes Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for JEE Math

In addition to these MS Chauhan Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these MS Chauhan Solutions for JEE Chemistry?

They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the MS Chauhan JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these MS Chauhan solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising MS Chauhan JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.