IE Irodov Solutions Chapter 36 Properties Of Atoms Spectra Part 2

Official IE Irodov Textbook Solutions: JEE Physics Chapter 36 Properties Of Atoms Spectra

Access comprehensive textbook solutions for Chapter 36 Properties Of Atoms Spectra using the IE Irodov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Physics: Chapter 36 Properties Of Atoms Spectra

View or download the dedicated Chapter 36 Properties Of Atoms Spectra solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

Properties Of Atoms. Spectra - Questions 138 to 166

X-ray spectra (continued)

Question 138. When the voltage applied to an X-ray tube is increased from V1 = 10 kV to V2 = 20 kV, the wavelength interval between the Kα line and the short-wave cut-off of the continuous X-ray spectrum increases by a factor n = 3.0. Find the atomic number of the element of which the tube's anticathode is made.

Solution. Let λ0 be the wavelength of the characteristic Kα line. The short-wave limit of the continuous spectrum is 2πħc/(eV). Hence
(λ0 − 2πħc/eV1) / (λ0 − 2πħc/eV2) = 1/n,
which gives λ0 = [2πħc/(eV1)] · (n − V1/V2)/(n − 1).
Using Moseley's law,
Z = 1 + √[8πc/(3Rλ0)] = 1 + 2√[ (n − 1) eV1 / (3ħR (n − V1/V2)) ] = 29.
(Check: λ0 = 0.155 nm, so Z = 1 + √783 ≈ 29.) The element is copper.

Teacher's Note: Combine the cut-off formula with Moseley's law; solve for the K-alpha wavelength first.

Exam Note: Write λmin = 2πħc/eV, then Moseley; answer Z = 29.

Question 139. What metal has in its absorption spectrum the difference between the frequencies of the X-ray K and L absorption edges equal to Δω = 6.85·1018 s−1?

Solution. The difference between the frequencies of the K and L absorption edges equals, in the Bohr picture, the frequency of the Kα line (see the energy-level diagram: K edge from n = 1 to the continuum, L edge from n = 2 to the continuum, Kα line n = 2 → n = 1). By Moseley's formula
Δω = (3/4) R (Z − 1)2,
so Z = 1 + √(4Δω/3R) = 22. The metal is titanium.

Teacher's Note: K edge minus L edge equals the K-alpha energy, so Moseley's law applies directly.

Exam Note: State K-alpha equals the edge difference; Z = 22, titanium.

Question 140. Calculate the binding energy of a K electron in vanadium whose L absorption edge has the wavelength λL = 2.4 nm.

Solution. From the energy-level diagram, the binding energy Eb of a K electron is the sum of the energy of the Kα line and the energy corresponding to the L edge:
Eb = 2πħc/λL + (3/4) ħR (Z − 1)2.
For vanadium Z = 23, and the Kα energy of vanadium was calculated in Problem 134(b). With 2πħc/λL = 0.51 keV for λL = 2.4 nm, we get
Eb = 5.46 keV.

Teacher's Note: Binding energy of K electron = K-alpha energy plus L-edge energy; use Z − 1 = 22.

Exam Note: Add both energies; about 5.46 keV (5.45 with exact constants).

Question 141. Find the binding energy of an L electron in titanium if the wavelength difference between the first line of the K series and its short-wave cut-off is Δλ = 26 pm.

Solution. By Moseley's law ħω = 2πħc/λ = EK − EL = (3/4) ħR (Z − 1)2, where −EK is the energy of the K electron and −EL that of the L electron. The short-wave cut-off of the K series corresponds to the energy
EK = 2πħc/(λ − Δλ) = ħω / (1 − ωΔλ/2πc).
Hence EL = EK − ħω = ħω / (2πc/(ωΔλ) − 1).
For titanium (Z = 22), ω = 6.85·1018 s−1, and so EL = 0.47 keV.

Teacher's Note: Cut-off energy is the K binding energy; subtract the K-alpha energy to get the L energy.

Exam Note: Use EL = ħω/(2πc/ωΔλ − 1); answer 0.47 keV.

Question 142. Find the kinetic energy and the velocity of the photoelectrons liberated by Kα radiation of zinc from the K shell of iron whose K band absorption edge wavelength is λK = 174 pm.

Solution. The energy of the Kα radiation of zinc (Z = 30) is ħω = (3/4) ħR (Z − 1)2. The binding energy of K electrons in iron is obtained from the wavelength of its K absorption edge as EK = 2πħc/λK. By Einstein's equation
T = (3/4) ħR (Z − 1)2 − 2πħc/λK = 1.463 keV.
The corresponding velocity of the photoelectrons is v = √(2T/m) = 2.27·107 m/s.
Corrected: the book prints 2.27·106 m/s; recalculation gives 2.27·107 m/s (non-relativistic, since T ≪ mc2).

Teacher's Note: Photoelectron energy: zinc K-alpha photon minus iron K binding energy.

Exam Note: Zinc gives photon; iron edge is binding.

Magnetic moment and the Lande g factor

Question 143. Calculate the Lande g factor for atoms (a) in S states; (b) in singlet states.

Solution. From the Lande formula g = 1 + [J(J+1) + S(S+1) − L(L+1)] / [2J(J+1)].
(a) For S states L = 0, which implies J = S. Then g = 1 + 2S(S+1)/[2S(S+1)] = 2 (for S = 0 the g factor is not defined, as J = 0).
(b) For singlet states S = 0 and J = L, so g = 1 + [J(J+1) − L(L+1)] / [2J(J+1)] = 1.
Corrected: the book's remark "if S = 0, g = 2" is inconsistent; for S = 0 and L = 0 the state has J = 0 and g is indeterminate.

Teacher's Note: Put L = 0 (then J = S) or S = 0 (then J = L) into the Lande formula.

Exam Note: Answers: S state g = 2; singlet g = 1.

Question 144. Calculate the Lande g factor for the following terms: (a) 6F1/2; (b) 4D1/2; (c) 5F2; (d) 5P1; (e) 3P0.

Solution. Use g = 1 + [J(J+1) + S(S+1) − L(L+1)] / [2J(J+1)].
(a) 6F1/2: S = 5/2, L = 3, J = 1/2. g = 1 + (3/4 + 35/4 − 12)/(2·3/4) = 1 + (38 − 48)/6 = −2/3.
(b) 4D1/2: S = 3/2, L = 2, J = 1/2. g = 1 + (3/4 + 15/4 − 6)/(2·3/4) = 1 + (18 − 24)/6 = 0.
(c) 5F2: S = 2, L = 3, J = 2. g = 1 + (6 + 6 − 12)/(2·6) = 1.
(d) 5P1: S = 2, L = 1, J = 1. g = 1 + (2 + 6 − 2)/(2·2) = 5/2.
(e) 3P0: for states with J = 0, L = S, the g factor is indeterminate.

Teacher's Note: Read S, L, J from the term symbol 2S+1LJ before substituting.

Exam Note: Show each substitution; J = 0 gives indeterminate g.

Question 145. Calculate the magnetic moment of an atom (in Bohr magnetons) (a) in the 1F state; (b) in the 2D3/2 state; (c) in the state in which S = 1, L = 2, and the Lande factor g = 4/3.

Solution. Use μ = g√(J(J+1)) μB.
(a) 1F: S = 0, L = 3 = J, so g = 1 and μ = √(3·4) μB = 2√3 μB.
(b) 2D3/2: S = 1/2, L = 2, J = 3/2. g = 1 + (15/4 + 3/4 − 6)/(2·15/4) = 1 + (18 − 24)/30 = 4/5. μ = (4/5)√(15/4) μB = (2/5)√15 μB = 2√(3/5) μB.
(c) 4/3 = 1 + [J(J+1) + 2 − 6]/[2J(J+1)], so (1/3)·2J(J+1) = J(J+1) − 4 after clearing the denominator, i.e. J(J+1)/3 = 4, J(J+1) = 12 and J = 3. Then μ = (4/3)√12 μB = (8/√3) μB.

Teacher's Note: Find J first (from the term or from g), then g, then μ = g√(J(J+1)) μB.

Exam Note: Magnetic moment uses √(J(J+1)), not J.

Question 146. Determine the spin angular momentum of an atom in the state D2 if the maximum value of the magnetic moment projection in that state is equal to four Bohr magnetons.

Solution. The projection of the magnetic moment is μz = g mJ μB, where mJ is the projection of J on the z-axis. The maximum value of mJ is J, so gJ = 4. Since J = 2, g = 2. Now
2 = 1 + [J(J+1) + S(S+1) − L(L+1)]/[2J(J+1)] = 1 + [6 + S(S+1) − 6]/(2·6) = 1 + S(S+1)/12 (as L = 2).
Hence S(S+1) = 12, S = 3. The spin angular momentum is MS = ħ√(S(S+1)) = ħ√(3·4) = 2√3 ħ.

Teacher's Note: Maximum μz is gJμB; get g, then solve the Lande formula for S.

Exam Note: Answer MS = 2√3 ħ, from S = 3.

Question 147. An atom in the state with quantum numbers L = 2, S = 1 is located in a weak magnetic field. Find its magnetic moment if the least possible angle between the angular momentum and the field direction is known to be equal to 30°.

Solution. The angle between the angular momentum vector and the field is least when the projection of the angular momentum is maximum, i.e. Jħ. Thus Jħ = √(J(J+1)) ħ cos 30°, or √(J/(J+1)) = √3/2. Hence J = 3. Then
g = 1 + (3·4 + 1·2 − 2·3)/(2·3·4) = 1 + 8/24 = 4/3,
and μ = (4/3)√(3·4) μB = (8/√3) μB.

Teacher's Note: Smallest angle means mJ = J; cos θ = J/√(J(J+1)) fixes J.

Exam Note: cos 30° gives J = 3; μ = (8/√3) μB.

Question 148. A valence electron in a sodium atom is in the state with principal quantum number n = 3, with the total angular momentum being the greatest possible. What is its magnetic moment in that state?

Solution. For n = 3 the greatest orbital quantum number is l = 2, so the state with maximum total angular momentum is 2D5/2. Then
g = 1 + [(5/2)(7/2) + (1/2)(3/2) − 2·3] / [2·(5/2)(7/2)] = 1 + (35 + 3 − 24)/70 = 1 + 1/5 = 6/5.
Hence μ = (6/5)√((5/2)(7/2)) μB = 3√(7/5) μB.

Teacher's Note: Maximum l = 2, J = 5/2; then apply the Lande formula.

Exam Note: Term 2D5/2; μ = 3√(7/5) μB ≈ 3.55 μB.

Question 149. An excited atom has the electronic configuration 1s22s22p3d, being in the state with the greatest possible total angular momentum. Find the magnetic moment of the atom in that state.

Solution. To get the greatest possible total angular momentum we must have S = Smax = 1, L = Lmax = 1 + 2 = 3, and J = L + S = 4. Then
g = 1 + (4·5 + 1·2 − 3·4)/(2·4·5) = 1 + 10/40 = 5/4,
and μ = (5/4)√(4·5) μB = (5√5/2) μB.

Teacher's Note: Maximum J needs maximum S and L from p and d electrons.

Exam Note: Use S = 1, L = 3, J = 4.

Question 150. Find the total angular momentum of an atom in the state with S = 3/2 and L = 2 if its magnetic moment is known to be equal to zero.

Solution. Since μ = 0, we must have either J = 0 or g = 0. But J = 0 is incompatible with L = 2 and S = 3/2. Hence g = 0. Thus
0 = 1 + [J(J+1) + (3/2)(5/2) − 2·3] / [2J(J+1)],
or −3J(J+1) = 15/4 − 6 = −9/4, hence J(J+1) = 3/4 and J = 1/2. The total angular momentum is M = ħ√((1/2)(3/2)) = ħ√3/2.

Teacher's Note: Zero moment with J ≠ 0 forces g = 0; solve the Lande formula for J.

Exam Note: Answer J = 1/2, M = (√3/2) ħ.

Question 151. A certain atom is in the state in which S = 2, the total angular momentum M = √2 ħ, and the magnetic moment is equal to zero. Write the spectral symbol of the corresponding term.

Solution. From M = ħ√(J(J+1)) = √2 ħ we find J = 1. From the zero magnetic moment, g = 0:
1 + [1·2 + 2·3 − L(L+1)]/(2·1·2) = 0, i.e. 1 + [8 − L(L+1)]/4 = 0,
so L(L+1) = 12 and L = 3. The state is 5F1.

Teacher's Note: J comes from M; g = 0 then fixes L through the Lande formula.

Exam Note: Multiplicity 2S+1 = 5, L = 3 (F), J = 1: 5F1.

Atoms in magnetic fields: precession, forces, splitting

Question 152. An atom in the state 2P3/2 is located in an external magnetic field of induction B = 1.0 kG. In terms of the vector model find the angular precession velocity of the total angular momentum of that atom.

Solution. If M is the total angular momentum vector of the atom, the associated magnetic moment is μm = gμBM/ħ, where g is the Lande factor. In a field B the interaction energy is H′ = −gμB M·B/ħ. This leads to the equation of motion dM/dt = Ω × M, i.e. precession with
Ω = gμBB/ħ.
In Gaussian units μB = 0.927·10−20 erg/gauss, B = 103 gauss, ħ = 1.054·10−27 erg·s. For 2P3/2, g = 1 + [(3/2)(5/2) + (1/2)(3/2) − 1·2]/[2·(3/2)(5/2)] = 1 + 1/3 = 4/3, and so
Ω = 1.17·1010 rad/s.
The same formula holds in SI with μB = 0.927·10−23 A·m2, B = 10−1 T, ħ = 1.054·10−34 J·s; the answer is the same.

Teacher's Note: Larmor-type precession: Ω = gμBB/ħ with g = 4/3 for 2P3/2.

Exam Note: Convert 1 kG to 0.1 T; answer 1.17·1010 rad/s.

Question 153. An atom in the state 2P1/2 is located on the axis of a loop of radius r = 5 cm carrying a current I = 10 A. The distance between the atom and the centre of the loop is equal to the radius of the latter. How great may be the maximum force that the magnetic field of that current exerts on the atom?

Solution. The force on an atom with magnetic moment μ in a field B is F = (μ·∇)B. The maximum force arises when μ is along the axis or close to it. Then Fz = (μz)max ∂B/∂z, where (μz)max = gμBJ. For 2P1/2, g = 1 + [(1/2)(3/2) + (1/2)(3/2) − 1·2]/[2·(1/2)(3/2)] = 1 − (1/2)/(3/2) = 2/3 and J = 1/2, so (μz)max = (1/3) μB.
The field on the axis is Bz = (μ0/4π)·2πIr2/(r2 + z2)3/2, so
∂Bz/∂z = −(μ0/4π)·6πIr2z/(r2 + z2)5/2,
and at z = r its magnitude is (μ0/4π)·3πI/(√8 r2).
Thus the maximum force is F = (1/3) μB (μ0/4π)·3πI/(√8 r2). Substituting SI data, F = 4.1·10−27 N.

Teacher's Note: Force on a dipole is μz ∂B/∂z; differentiate the loop's axial field and set z = r.

Exam Note: Use μz,max = gJμB = μB/3; F ≈ 4.1·10−27 N.

Question 154. A hydrogen atom in the normal state is located at a distance r = 2.5 cm from a long straight conductor carrying a current I = 10 A. Find the force acting on the atom.

Solution. The field at a distance r from a long wire is tangential: Bφ = μ0I/(2πr) = (μ0/4π)·2I/r. The force on a magnetic dipole is also tangential, of magnitude (μ·∇)Bφ, and is non-vanishing only when the component of μ along r is non-zero. Then
F = μr ∂Bφ/∂r = −μr (μ0/4π)·2I/r2.
The maximum value is μr = ±μB (ground-state hydrogen: S = 1/2, L = 0, g = 2, so μz = ±μB). Thus
Fmax = μB (μ0/4π)·2I/r2 = 2.97·10−26 N.

Teacher's Note: Ground-state hydrogen has projection ±μB; force is μ ∂B/∂r.

Exam Note: Differentiate B = μ0I/2πr; answer 2.97·10−26 N.

Question 155. A narrow stream of vanadium atoms in the ground state 4F3/2 is passed through a transverse strongly inhomogeneous magnetic field of length l1 = 5.0 cm as in the Stern-Gerlach experiment. The beam splitting is observed on a screen located at a distance l2 = 15 cm from the magnet. The kinetic energy of the atoms is T = 22 meV. At what value of the gradient of the magnetic field induction B is the distance between the extreme components of the split beam on the screen equal to δ = 2.0 mm?

Solution. In the inhomogeneous field the atom experiences a force F = gJμB ∂B/∂z, upward or downward depending on the sign of mJ. The atom moves on a parabola inside the field and in a straight line outside it. The distance between the extreme lines on the screen is
δ = 2gJμB (∂B/∂z) [ (1/2)(l1/v)2 + l1l2/v2 ] / mV.
(The first term is the displacement inside the field, the second the displacement due to the transverse velocity acquired in the field.) Using mVv2/2 = T,
∂B/∂z = 2Tδ / [gμBJ l1(l1 + 2l2)].
For the ground state 4F3/2 (S = 3/2, L = 3, J = 3/2): g = 1 + (15/4 + 15/4 − 12)/(2·15/4) = 1 + (30 − 48)/30 = 2/5. Substituting the data gives ∂B/∂z ≈ 1.45·104 G/cm (about 1.45 T/cm).
Corrected: the problem as printed says T = 22 MeV, which is a misprint for 22 meV (a beam of atoms cannot have MeV energies); the book's printed value 1.45·1013 G/cm results from using 22 MeV and is 109 times too large. With T = 22 meV the result is 1.45·104 G/cm.

Teacher's Note: Beam deflection: parabola in the magnet plus straight line to the screen; atoms' T fixes v.

Exam Note: Note T is 22 meV; use g = 2/5; result 1.45·104 G/cm.

Question 156. Into what number of sublevels are the following terms split in a weak magnetic field: (a) 3P0; (b) 2F5/2; (c) 4P1/2?

Solution. (a) The term 3P0 does not split in a weak magnetic field, since its total angular momentum is zero (one sublevel).
(b) The term 2F5/2 splits into 2J + 1 = 2·(5/2) + 1 = 6 sublevels. The shift of each sublevel is ΔE = −gμBMJB, where MJ = −J, −J+1, …, J, and g = 1 + [(5/2)(7/2) + (1/2)(3/2) − 3·4]/[2·(5/2)(7/2)] = 1 + (38 − 48)/70 = 6/7.
(c) The book's working here is done for the term 4D1/2 (S = 3/2, L = 2, J = 1/2): g = 1 + (3/4 + 15/4 − 6)/(2·3/4) = 1 − 1 = 0, so the energy differences vanish and that level does not split.
Corrected: for the term 4P1/2 actually asked (S = 3/2, L = 1, J = 1/2), g = 1 + (3/4 + 15/4 − 2)/(2·3/4) = 8/3 ≠ 0, so it splits into 2J + 1 = 2 sublevels. (The printed solution corresponds to 4D1/2, where there is no splitting.)

Teacher's Note: Number of sublevels is 2J + 1, but only if g ≠ 0; check g.

Exam Note: g = 0 means no splitting.

Question 157. An atom is located in a magnetic field of induction B = 2.50 kG. Find the value of the total splitting of the following terms (expressed in eV units): (a) 1D; (b) 3F4.

Solution. (a) For the 1D2 term, g = 1 + (2·3 + 0 − 2·3)/(2·2·3) = 1, and ΔE = −μBMJB with MJ = −2, −1, 0, 1, 2. Thus the total splitting is δE = 4μBB = 57.9 μeV.
(b) For the 3F4 term, g = 1 + (4·5 + 1·2 − 3·4)/(2·4·5) = 1 + 10/40 = 5/4, and ΔE = −(5/4)μBBMJ with MJ = −4 to +4. Thus δE = (5/4)μBB·8 = 10μBB (= 2gJμBB) = 144.7 μeV.

Teacher's Note: Total splitting is 2J·gμBB, between MJ = +J and −J.

Exam Note: Use μB = 5.79·10−5 eV/T and 0.25 T.

Zeeman effect

Question 158. What kind of Zeeman effect, normal or anomalous, is observed in a weak magnetic field in the case of spectral lines caused by the following transitions: (a) 1P → 1S; (b) 2D5/2 → 2P3/2; (c) 3D1 → 3P0; (d) 5I5 → 5H4?

Solution. (a) The term 1P1 splits into 3 sublevels (M = ±1, 0) according to ΔE = −gμBBM, with g = 1 + (1·2 + 0 − 1·2)/(2·1·2) = 1. The term 1S0 does not split. The transition gives 3 lines, i.e. a normal Zeeman triplet.
(b) 2D5/2 splits into 6 sublevels (M = ±5/2, ±3/2, ±1/2) with g = 1 + [(5/2)(7/2) + (1/2)(3/2) − 6]/[2·(5/2)(7/2)] = 6/5. 2P3/2 splits into 4 sublevels (M = ±3/2, ±1/2) with g = 4/3. The g factors differ, so the splitting is anomalous.
(c) 3D1 splits into 3 levels; 3P0 does not split. For 3D1: g = 1 + (1·2 + 1·2 − 2·3)/(2·1·2) = 1/2. Corrected: the book writes g = 5/2 and calls the effect normal; with g = 1/2 the line is a triplet with spacing (1/2)μBB instead of the normal μBB, so the pattern differs from the Lorentz triplet (anomalous).
(d) 5I5: g = 1 + (5·6 + 2·3 − 6·7)/(2·5·6) = 1 − 1/10 = 9/10. 5H4: g = 1 + (4·5 + 2·3 − 5·6)/(2·4·5) = 1 − 1/10 = 9/10. The g factors are equal, so the sublevel spacing is the same (although the numbers of levels are 11 and 9), and only lines with energies ħω0, ħω0 ± gμBB occur. The Zeeman pattern is normal (a triplet).

Teacher's Note: Normal needs equal g in both terms (Lorentz triplet); unequal g gives anomalous patterns.

Exam Note: Compare g of both terms; state triplet spacing.

Question 159. Determine the spectral symbol of an atomic singlet term if the total splitting of that term in a weak magnetic field of induction B = 3.0 kG amounts to ΔE = 104 μeV.

Solution. For a singlet term S = 0, L = J and g = 1. The total splitting is δE = 2JμBB. Substitution gives J = δE/(2μBB) = 3. The term is 1F3.

Teacher's Note: Singlet: g = 1 and J = L, so total splitting is 2JμBB.

Exam Note: Compute J = 3, then L = 3 is F: 1F3.

Question 160. It is known that a spectral line λ = 612 nm of an atom is caused by a transition between singlet terms. Calculate the interval Δλ between the extreme components of that line in the magnetic field with induction B = 10.0 kG.

Solution. As the line is caused by a transition between singlet terms, the Zeeman effect is normal (g = 1 for both terms). The energy difference between the extreme components is 2μBB. This must equal −Δ(2πħc/λ) = 2πħcΔλ/λ2. Thus
Δλ = μBBλ2/(πħc) = 35 pm.

Teacher's Note: Extreme components differ by 2μBB; convert energy spacing to wavelength with Δλ = λ2ΔE/2πħc.

Exam Note: Convert 10 kG to 1 T; answer 35 pm.

Question 161. Find the minimum magnitude of the magnetic field induction B at which a spectral instrument with resolving power λ/δλ = 1.0·105 is capable of resolving the components of the spectral line λ = 536 nm caused by a transition between singlet terms. The observation line is at right angles to the magnetic field direction.

Solution. From the previous problem, if the components are λ, λ ± Δλ, then λ/Δλ = 2πħc/(μBBλ). For resolution, λ/Δλ ≤ R = λ/δλ of the instrument. Thus 2πħc/(μBBλ) ≤ R, or B ≥ 2πħc/(μBλR). Hence the minimum magnetic induction is
Bmin = 2πħc/(μBλR) = 4 kG = 0.4 T.

Teacher's Note: Components resolved when their spacing Δλ is at least the instrument's δλ = λ/R.

Exam Note: Set Δλ = λ/R; Bmin = 0.4 T.

Question 162. A spectral line caused by the transition 3D1 → 3P0 experiences the Zeeman splitting in a weak magnetic field. When observed at right angles to the magnetic field direction, the interval between the neighbouring components of the split line is Δω = 1.32·1010 s−1. Find the magnetic field induction B at the point where the source is located.

Solution. The 3P0 term does not split. The 3D1 term splits into 3 lines with shifts ΔE = −gμBBMz, Mz = ±1, 0. The interval between neighbouring components is ħΔω = gμBB, hence B = ħΔω/(gμB). For the 3D1 term g = 1 + (1·2 + 1·2 − 2·3)/(2·1·2) = 1 + (4 − 6)/4 = 1/2. Substitution gives B = 3.00 kG = 0.3 T.

Teacher's Note: Neighbouring components differ by gμBB; g of 3D1 is 1/2, not 1.

Exam Note: Use g = 1/2; B = ħΔω/(gμB) = 0.3 T.

Question 163. The wavelengths of the Na yellow doublet (2P → 2S) are equal to 589.59 and 589.00 nm. Find: (a) the ratio of the intervals between neighbouring sublevels of the Zeeman splitting of the terms 2P3/2 and 2P1/2 in a weak magnetic field; (b) the magnetic field induction B at which the interval between neighbouring sublevels of the Zeeman splitting of the term 2P3/2 is η = 50 times smaller than the natural splitting of the term 2P.

Solution. (a) For 2P3/2: g = 1 + [(3/2)(5/2) + (1/2)(3/2) − 1·2]/[2·(3/2)(5/2)] = 1 + 10/30 = 4/3, and E(Mz) = E0 − (4/3)μBBMz, Mz = ±3/2, ±1/2. Neighbouring sublevels are separated by δE(2P3/2) = (4/3)μBB. For 2P1/2: g = 1 + [(1/2)(3/2) + (1/2)(3/2) − 2]/[2·(1/2)(3/2)] = 1 + (6 − 8)/6 = 2/3, so δE(2P1/2) = (2/3)μBB. The ratio of the two splittings is 2 : 1.
(b) The interval between neighbouring Zeeman sublevels of 2P3/2 is (4/3)μBB. The natural splitting (between the D1 and D2 lines) is (2πħc/λ2)Δλ. Thus (4/3)μBB = 2πħcΔλ/(λ2η), or
B = 3πħcΔλ/(2μBλ2η) = 5.46 kG.

Teacher's Note: Zeeman spacing is gμBB; compare it with the fine-structure interval 2πħcΔλ/λ2.

Exam Note: Ratio 2:1 from g = 4/3 and 2/3; B ≈ 5.46 kG.

Question 164. Draw a diagram of permitted transitions between the terms 2P3/2 and 2S1/2 in a weak magnetic field. Find the displacements (in rad/s units) of Zeeman components of that line in a magnetic field B = 4.5 kG.

Solution. For the 2P3/2 level g = 4/3, so E′ = E′0 − (4/3)μBBM′z, M′z = ±3/2, ±1/2 (four sublevels). For the 2S1/2 level g = 2 (since L = 0), E = E0 − 2μBBMz, Mz = ±1/2. Permitted transitions have ΔMz = 0, ±1, and the displacement of a line is Δω = (μBB/ħ)·|(4/3)M′z − 2Mz| about the unshifted frequency. Of the eight combinations, six obey ΔMz = 0, ±1:
−5/3−1−1/3+1/3+1+5/3unshifted line (ω0); shifts in units of μBB/ħ
3/2 → 1/2 and −3/2 → −1/2: Δω = ±μBB/ħ = ±3.96·1010 rad/s.
1/2 → 1/2 and −1/2 → −1/2: Δω = ±(1/3)μBB/ħ = ±1.32·1010 rad/s.
1/2 → −1/2 and −1/2 → 1/2: Δω = ±(5/3)μBB/ħ = ±6.6·1010 rad/s.
Thus six lines are observed (the pair 3/2 → −1/2 and −3/2 → 1/2 is forbidden, as ΔM = 2).

Teacher's Note: Shift of each line is (g′M′ − gM)μBB/ħ; allow only ΔM = 0, ±1.

Exam Note: Six lines: ±1, ±1/3, ±5/3 in units μBB/ħ.

Question 165. The same spectral line undergoing anomalous Zeeman splitting is observed in direction 1 and, after reflection from the mirror M (Fig. 6.9), in direction 2. How many Zeeman components are observed in both directions if the spectral line is caused by the transition (a) 2P3/2 → 2S1/2; (b) 3P2 → 3S1? (Fig. 6.9 shows the magnet poles N and S above and below the source, with the mirror M between them; direction 1 runs to the right and direction 2 to the left. Not redrawn.)

Solution. The difference arises because of different selection rules in the two cases. In (1) the line is emitted perpendicular to the field and the selection rules are ΔMz = 0, ±1. In (2) the light is emitted along the direction of the field; then ΔMz = ±1 only and ΔMz = 0 is forbidden.
(a) 2P3/2 → 2S1/2 (considered in Problem 164): in (1) all six lines are seen. In (2) the lines 1/2 → 1/2 and −1/2 → −1/2 (ΔM = 0) are forbidden, so four lines are seen.
(b) 3P2 → 3S1: for 3P2, g = 1 + (2·3 + 1·2 − 1·2)/(2·2·3) = 3/2, so E′(M′z) = E′0 − (3/2)μBBM′z, M′z = ±2, ±1, 0. For 3S1, g = 2 and E(Mz) = E0 − 2μBBMz, Mz = ±1, 0. The lines are:
ΔMz = +1: −2 → −1, −1 → 0, 0 → 1;
ΔMz = 0: −1 → −1, 0 → 0, 1 → 1;
ΔMz = −1: 2 → 1, 1 → 0, 0 → −1.
All energy differences are unequal because the two g values are unequal. There are nine lines in (1) and six lines in (2).

Teacher's Note: Transverse view allows ΔM = 0, ±1; longitudinal view forbids ΔM = 0.

Exam Note: Count allowed pairs: (a) 6 and 4; (b) 9 and 6.

Question 166. Calculate the total splitting Δω of the spectral line 3D3 → 3P2 in a weak magnetic field with induction B = 3.4 kG.

Solution. For the two levels E′ = E′0 − g′μBM′zB and E = E0 − gμBMzB, so the shift of a component is Δω = (μBB/ħ)[g′M′z − gMz], subject to ΔMz = 0, ±1. For 3D3: g′ = 1 + (3·4 + 1·2 − 2·3)/(2·3·4) = 1 + 8/24 = 4/3. For 3P2: g = 1 + (2·3 + 1·2 − 1·2)/(2·2·3) = 3/2. Thus Δω = (μBB/ħ)|(4/3)M′z − (3/2)Mz|. The 15 lines (M′z → Mz, shifts in units of μBB/ħ) are:
M′ → MshiftM′ → Mshift
3 → 210 → 1−3/2
2 → 2−1/30 → 00
2 → 17/60 → −13/2
1 → 2−5/3−1 → 0−4/3
1 → 1−1/6−1 → −11/6
1 → 04/3−1 → −25/3
−2 → −1−7/6−2 → −21/3
−3 → −2−1
There are 15 lines in all. The lines farthest out are 1 → 2 and −1 → −2, so the total splitting is Δω = (10/3) μBB/ħ.
Numerically μBB/ħ = 2.99·1010 rad/s for B = 0.34 T, so Δω ≈ 1.0·1011 rad/s.
Corrected: the book prints Δω = 7.8·1010 rad/s, which does not follow from (10/3)μBB/ħ at B = 3.4 kG; the correct value is 9.97·1010 rad/s.

Teacher's Note: Evaluate (4/3)M′ − (3/2)M over allowed transitions; the extremes ±5/3 give the total spread.

Exam Note: Total spread (10/3)μBB/ħ ≈ 1.0·1011 rad/s.

JEE Mathematics: IE Irodov Solutions for IE Irodov Solutions Chapter 36 Properties Of Atoms Spectra Part 2

Download IE Irodov Solutions for JEE

Access the complete chapter-wise PDF for IE Irodov Solutions Chapter 36 Properties Of Atoms Spectra Part 2. These structured IE Irodov Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Detailed Calculation Guides for JEE

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Additional Study Materials for 2026

In addition to these IE Irodov Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these IE Irodov Solutions for JEE Physics?

They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the IE Irodov JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these IE Irodov solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising IE Irodov JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.