IE Irodov Solutions for JEE Physics: Chapter 25 Elastic Waves
Explore reliable textbook solutions for Chapter 25 Elastic Waves tailored for JEE learners using IE Irodov methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice JEE Physics Solutions: Chapter 25 Elastic Waves
View or download the dedicated Chapter 25 Elastic Waves solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Elastic Waves. Acoustics - Questions 150 to 188
Elastic Waves. Acoustics (Part 1)
Question 150. How long will it take sound waves to travel the distance l between the points A and B if the air temperature between them varies linearly from T1 to T2? The velocity of sound propagation in air is equal to v = α√T, where α is a constant.
Solution. Since the temperature varies linearly, T = T1 + [(T2 − T1)/l]·x, for 0 < x < l, where x is the distance from A towards B. Hence dT = [(T2 − T1)/l] dx. (1)
An element dx at distance x from A takes time dt = dx/(α√T). (2)
From (1) and (2), dt = [l/(α√T)]·[dT/(T2 − T1)]. Integrating, ∫0t dt = [l/(α(T2 − T1))] ∫T1T2 dT/√T, so t = [2l/(α(T2 − T1))](√T2 − √T1).
Hence the sought time t = 2l/[α(√T1 + √T2)].
Teacher's Note: Variable speed: integrate dt = dx/v over the path, changing the variable from x to T.
Exam Note: Substitute, integrate in T, simplify to 2l/α(√T1+√T2).
Question 151. A plane harmonic wave with frequency ω propagates at a velocity v in a direction forming angles α, β, γ with the x, y, z axes. Find the phase difference between the oscillations at the points of the medium with coordinates x1, y1, z1 and x2, y2, z2.
Solution. The equation of a plane wave is ξ(r, t) = a cos(ωt − k·r), where k = (ω/v)n is the wave vector and n is the unit vector normal to the wave surface in the direction of propagation.
Or ξ(x, y, z) = a cos(ωt − kxx − kyy − kzz) = a cos(ωt − kx cos α − ky cos β − kz cos γ).
Thus ξ(x1, y1, z1, t) = a cos(ωt − kx1 cos α − ky1 cos β − kz1 cos γ) and ξ(x2, y2, z2, t) = a cos(ωt − kx2 cos α − ky2 cos β − kz2 cos γ).
Hence the sought phase difference φ2 − φ1 = k[(x1 − x2) cos α + (y1 − y2) cos β + (z1 − z2) cos γ],
or Δφ = |φ2 − φ1| = (ω/v)·|(x1 − x2) cos α + (y1 − y2) cos β + (z1 − z2) cos γ|.
Teacher's Note: Phase difference = k times the projection of the separation on the propagation direction.
Exam Note: Write k·r with direction cosines; subtract phases; give modulus.
Question 152. A plane wave of frequency ω propagates so that a certain phase of oscillation moves along the x, y, z axes with velocities v1, v2, v3 respectively. Find the wave vector k, assuming the unit vectors ex, ey, ez of the coordinate axes to be assigned.
Solution. The phase of the oscillation can be written as Φ = ωt − k·r. When the wave is followed along the x-axis, Φ = ωt − kxx (putting ky = kz = 0). Since the velocity associated with this is v1, kx = ω/v1. Similarly ky = ω/v2 and kz = ω/v3.
Thus k = (ω/v1)ex + (ω/v2)ey + (ω/v3)ez.
Teacher's Note: Phase speed along an axis exceeds wave speed; each component is ki = ω/vi.
Exam Note: Fix phase along each axis; k components are ω/v.
Question 153. A plane elastic wave ξ = a cos(ωt − kx) propagates in a medium K. Find the equation of this wave in a reference frame K' moving in the positive direction of the x axis with a constant velocity V relative to the medium K. Investigate the expression obtained.
Solution. The wave travelling in the +x direction in medium K is ξ = a cos(ωt − kx), i.e. ξ = a cos k(vt − x), where k = ω/v and v is the wave velocity.
In the frame K', the wave velocity is (v − V) in the +x direction and the coordinate is x'. Thus the sought wave equation is ξ = a cos k[(v − V)t − x'],
or ξ = a cos[(ω − (ω/v)V)t − kx'] = a cos[ωt(1 − V/v) − kx'].
Teacher's Note: Frequency seen in K' is ω' = ω(1 − V/v): a Doppler shift for a moving observer.
Exam Note: Replace v by v − V; read off the Doppler-shifted frequency.
Question 154. Demonstrate that any differentiable function f(t + αx), where α is a constant, provides a solution of the wave equation. What is the physical meaning of the constant α?
Solution. This follows on putting ξ = f(t + αx) in the one-dimensional wave equation ∂²ξ/∂x² = (1/v²) ∂²ξ/∂t². Then α² f''(t + αx) = (1/v²) f''(t + αx), so the wave equation is satisfied if α = ±1/v. That is the physical meaning of α: its magnitude is the reciprocal of the wave velocity, and the sign gives the direction of propagation.
Teacher's Note: Any function of (t ± x/v) is a travelling wave; α fixes speed and direction.
Exam Note: Substitute into wave equation, compare second derivatives, conclude α = ±1/v.
Question 155. The equation of a travelling plane sound wave has the form ξ = 60 cos(1800t − 5.3x), where ξ is expressed in micrometres, t in seconds, and x in metres. Find: (a) the ratio of the displacement amplitude, with which the particles of the medium oscillate, to the wavelength; (b) the velocity oscillation amplitude of particles of the medium and its ratio to the wave propagation velocity; (c) the oscillation amplitude of relative deformation of the medium and its relation to the velocity oscillation amplitude of particles of the medium.
Solution. The given wave is of the type ξ = a cos(ωt − kx), where a = 60×10−6 m, ω = 1800 s−1 and k = 5.3 m−1. As k = 2π/λ, λ = 2π/k, and v = ω/k = 340 m/s.
(a) Sought ratio = a/λ = ak/2π = 5.1×10−5.
(b) ∂ξ/∂t = −aω sin(ωt − kx), so the velocity oscillation amplitude is vm = aω = 0.11 m/s. The ratio vm/v = 0.11/340 = 3.2×10−4.
(c) Relative deformation = ∂ξ/∂x = ak sin(ωt − kx), so its amplitude is (∂ξ/∂x)m = ak = 60×10−6 × 5.3 = 3.2×10−4.
From (b) and (c): (∂ξ/∂x)m = ak = aω/v = (1/v)(∂ξ/∂t)m, where v = 340 m/s is the wave velocity.
Teacher's Note: Read a, ω, k from the equation; amplitudes follow by differentiating ξ in t and x.
Exam Note: Differentiate, take amplitudes; relative strain amplitude = vm/v.
Question 156. A plane wave ξ = a cos(ωt − kx) propagates in a homogeneous elastic medium. For the moment t = 0 draw: (a) the plots of ξ, ∂ξ/∂t and ∂ξ/∂x versus x; (b) the velocity direction of the particles of the medium at the points where ξ = 0, for the cases of longitudinal and transverse waves; (c) the approximate plot of density distribution ρ(x) of the medium for the case of longitudinal waves.
Solution. (a) At t = 0: ξ = a cos kx. Now ∂ξ/∂t = −aω sin(ωt − kx), so at t = 0, ∂ξ/∂t = aω sin kx. Also ∂ξ/∂x = ak sin(ωt − kx), so at t = 0, ∂ξ/∂x = −ak sin kx. Hence all the graphs are sinusoidal curves of the same period λ = 2π/k with different amplitudes (a, aω, ak): ξ is a cosine curve, ∂ξ/∂t a sine curve, and ∂ξ/∂x an inverted sine curve (the book draws them in the answer sheet of the problem book).
(b) At the points where ξ = 0, the velocity direction is positive, i.e. along the +x axis in the case of longitudinal waves, and along the +y axis in the case of transverse waves, where ∂ξ/∂t is positive, and vice versa.
(c) For the plot see the answer sheet of the problem book. For a longitudinal wave the density varies as ρ ≈ ρ0(1 − ∂ξ/∂x) = ρ0(1 + ak sin kx) at t = 0, i.e. a sine curve about the mean density ρ0.
Teacher's Note: Strain ∂ξ/∂x is in phase with particle velocity, so compressions sit where particles move forward.
Exam Note: State t = 0 expressions; note phases; give density.
Question 157. A plane elastic wave ξ = a e−γx cos(ωt − kx), where a, γ, ω and k are constants, propagates in a homogeneous medium. Find the phase difference between the oscillations at the points where the particles' displacement amplitudes differ by η = 1.0%, if γ = 0.42 m−1 and the wavelength is λ = 50 cm.
Solution. In the given wave the particle's displacement amplitude is a e−γx. Let two points x1 and x2 be those between which the displacement amplitudes differ by η = 1%. So a e−γx1 − a e−γx2 = η a e−γx1, or e−γx2 = e−γx1(1 − η), or ln(1 − η) − γx1 = −γx2. Hence x2 − x1 = −ln(1 − η)/γ, which is the path difference.
Phase difference = (2π/λ) × path difference = −(2π/λ)·ln(1 − η)/γ ≈ 2πη/(λγ) = 0.3 rad.
Teacher's Note: Amplitude ratio fixes the distance between the points; phase difference = k × that distance.
Exam Note: Find Δx from e−γΔx = 1 − η, then multiply by 2π/λ.
Question 158. Find the radius vector defining the position of a point source of spherical waves if that source is known to be located on the straight line between the points with radius vectors r1 and r2 at which the oscillation amplitudes of particles of the medium are equal to a1 and a2. The damping of the wave is negligible, the medium is homogeneous.
Solution. Let S be the source with position vector r relative to the reference point O, and let P and Q be the points with radius vectors r1 and r2. Since intensities are inversely proportional to the square of distances, I1/I2 = d2²/d1², where d1 = PS and d2 = QS. But intensity is proportional to the square of amplitude, so a1²/a2² = d2²/d1², or a1d1 = a2d2 = k (say). Thus d1 = k/a1 and d2 = k/a2.
Let n be the unit vector along PQ directed from P to Q. Then PS = d1n = (k/a1)n and SQ = d2n = (k/a2)n.
From the triangle law of vector addition, OP + PS = OS, i.e. r1 + (k/a1)n = r, or a1r1 + kn = a1r. (1)
Similarly r + (k/a2)n = r2, or a2r2 − kn = a2r. (2)
Adding (1) and (2): a1r1 + a2r2 = (a1 + a2)r.
Hence r = (a1r1 + a2r2)/(a1 + a2).
Teacher's Note: Spherical wave amplitude falls as 1/distance, so the source divides PQ in the ratio 1/a1 : 1/a2.
Exam Note: Use a ∝ 1/d, then the section formula or vector addition.
Question 159. A point isotropic source generates sound oscillations with frequency ν = 1.45 kHz. At a distance r0 = 5.0 m from the source the displacement amplitude of particles of the medium is equal to a0 = 50 µm, and at the point A located at a distance r = 10.0 m from the source the displacement amplitude is η = 3.0 times less than a0. Find: (a) the damping coefficient γ of the wave; (b) the velocity oscillation amplitude of particles of the medium at the point A.
Solution. (a) The equation of a spherical wave in a homogeneous absorbing medium of damping coefficient γ is ξ = (a'0 e−γr/r) cos(ωt − kr). Thus the particle's displacement amplitude equals a'0 e−γr/r. At r = r0, a0 = a'0 e−γr0/r0. (1) At r = r, a0/η = a'0 e−γr/r. (2)
From (1) and (2): eγ(r − r0) = η r0/r, so γ(r − r0) = ln(ηr0) − ln r, giving γ = [ln η + ln r0 − ln r]/(r − r0) = [ln 3 + ln 5 − ln 10]/5 = 0.08 m−1.
(b) ∂ξ/∂t = −(a'0 e−γr/r) ω sin(ωt − kr), so (∂ξ/∂t)m = (a'0 e−γr/r) ω. But at point A, a'0 e−γr/r = a0/η. So (∂ξ/∂t)m = a0ω/η = a0·2πν/η = (50×10−6/3) × 2π × 1.45×103 = 0.15 m/s (= 15 cm/s).
Corrected: the book prints this value as 15 m/s, but its own numbers give 0.15 m/s.
Teacher's Note: Spherical wave amplitude ∝ e−γr/r; velocity amplitude is displacement amplitude times ω.
Exam Note: Check powers of ten in aω/η; answer 0.15 m/s.
Question 160. Two plane waves propagate in a homogeneous elastic medium, one along the x axis and the other along the y axis: ξ1 = a cos(ωt − kx), ξ2 = a cos(ωt − ky). Find the wave motion pattern of particles in the plane xy if both waves (a) are transverse and their oscillation directions coincide; (b) are longitudinal.
Solution. (a) The equation of the resultant wave is ξ = ξ1 + ξ2 = 2a cos[k(y − x)/2] cos[ωt − k(x + y)/2] = a' cos[ωt − k(x + y)/2], where a' = 2a cos[k(y − x)/2]. The equation of the wave surfaces is x + y = const. (For the plots see the answer sheet of the problem book.)
For antinodes, i.e. maximum amplitude, cos[k(y − x)/2] = ±1 = cos nπ, so ±(x − y) = 2nπ/k = nλ, or y = x ± nλ, n = 0, 1, 2, … Hence the particles of the medium at points lying on these (solid) straight lines oscillate with maximum amplitude.
For nodes, i.e. minimum intensity, cos[k(y − x)/2] = 0, so ±k(y − x)/2 = (2n + 1)π/2, or y = x ± (2n + 1)λ/2. Hence the particles at points lying on these (dotted) lines do not oscillate.
(b) When the waves are longitudinal, ξ1 (along x) and ξ2 (along y) are perpendicular displacements. (For the plots see the answer sheet of the problem book.) Eliminating t: k(y − x) = cos−1(ξ1/a) − cos−1(ξ2/a), so ξ1/a = cos{k(y − x) + cos−1(ξ2/a)} = (ξ2/a) cos k(y − x) − sin k(y − x) √(1 − ξ2²/a²). (1)
From (1), if sin k(y − x) = 0 = sin nπ, then ξ1 = ξ2(−1)n. Thus particles at points lying on the straight lines y = x ± nλ/2 oscillate along those lines (even n), or at right angles to them (odd n).
Also from (1), if cos k(y − x) = 0 = cos(2n + 1)π/2, then ξ1²/a² = 1 − ξ2²/a², a circle. Thus particles at points where y = x ± (n ± 1/4)λ oscillate along circles. In general, all other particles move along ellipses.
Teacher's Note: Two crossing waves give a standing pattern along (y − x); nodes, antinodes, then circles/ellipses for perpendicular displacements.
Exam Note: Use sum-to-product; locate nodes and antinodes; for (b) eliminate t.
Question 161. A plane undamped harmonic wave propagates in a medium. Find the mean space density of the total oscillation energy ⟨w⟩, if at any point of the medium the space density of energy becomes equal to w0 one-sixth of an oscillation period after passing the displacement maximum.
Solution. The displacement is ξ = a cos(ωt − kx). Without loss of generality, confine to x = 0. The displacement maxima then occur at ωt = nπ; concentrate on ωt = 0. The energy density at x = 0 is w = ρa²ω² sin²ωt. T/6 later (T = 2π/ω), i.e. at ωt = π/3: w = ρa²ω² sin²(π/3) = (3/4)ρa²ω² = w0.
Thus ⟨w⟩ = (1/2)ρa²ω² = 2w0/3.
Teacher's Note: Total energy density of a travelling wave is ρa²ω² sin²(ωt − kx); its mean is half the peak.
Exam Note: Use ωt = π/3; mean is half the peak.
Question 162. A point isotropic sound source is located on the perpendicular to the plane of a ring drawn through the centre O of the ring. The distance between the point O and the source is l = 1.00 m, the radius of the ring is R = 0.50 m. Find the mean energy flow across the area enclosed by the ring if at the point O the intensity of sound is equal to I0 = 30 µW/m². The damping of the waves is negligible.
Solution. The power output of the source must be Q = 4πl²I0 watts. The required flux of acoustic power across the ring is then Φ = Q·Ω/4π, where Ω is the solid angle subtended by the disc enclosed by the ring at the source S. This solid angle is Ω = 2π(1 − cos α), where tan α = R/l, so cos α = l/√(l² + R²). So the flux Φ = I0·2πl²(1 − l/√(l² + R²)).
Substitution gives Φ = 2π × 30 × (1 − 1/√(1 + 1/4)) µW = 19.9 µW ≈ 20 µW.
The solid-angle formula follows thus: let SO be the polar axis. The required solid angle is the area of that part of the surface of a sphere of unit radius whose colatitude is ≤ α: Ω = ∫0α 2π sin θ dθ = 2π(1 − cos α).
Corrected: the book prints 1.99 µW, but the substitution gives 19.9 µW.
Teacher's Note: Flux = total power × (solid angle of ring disc)/4π; solid angle of a cone is 2π(1 − cos α).
Exam Note: Find cos α = l/√(l²+R²); watch the arithmetic (≈ 20 µW).
Question 163. A point isotropic source with sonic power P = 0.10 W is located at the centre of a round hollow cylinder with radius R = 1.0 m and height h = 2.0 m. Assuming the sound to be completely absorbed by the walls of the cylinder, find the mean energy flow reaching the lateral surface of the cylinder.
Solution. From the result of 4.162, the power flowing out through either one of the end openings (circles of radius R at distance h/2) is (P/2)[1 − (h/2)/√(R² + (h/2)²)] = (P/2)[1 − h/√(4R² + h²)].
As the total power output equals P, the power reaching the lateral surface is P − 2·(P/2)[1 − h/√(4R² + h²)] = Ph/√(4R² + h²) = 0.07 W.
Teacher's Note: Subtract the flux through both end discs (solid-angle result of Q.162) from the total power.
Exam Note: Reuse Q.162 solid angle for ends; subtract.
Question 164. The equation of a plane standing wave in a homogeneous elastic medium has the form ξ = a cos kx · cos ωt. Plot: (a) ξ and ∂ξ/∂x as functions of x at the moments t = 0 and t = T/2, where T is the oscillation period; (b) the distribution of density ρ(x) of the medium at the moments t = 0 and t = T/2 in the case of longitudinal oscillations; (c) the velocity distribution of particles of the medium at the moment t = T/4; indicate the directions of velocities at the antinodes, both for longitudinal and transverse oscillations.
Solution. We are given ξ = a cos kx cos ωt, so ∂ξ/∂x = −ak sin kx cos ωt and ∂ξ/∂t = −aω cos kx sin ωt. Thus (ξ)t=0 = a cos kx, (ξ)t=T/2 = −a cos kx, (∂ξ/∂x)t=0 = −ak sin kx, (∂ξ/∂x)t=T/2 = +ak sin kx.
(a) The graphs of ξ and ∂ξ/∂x are sinusoidal curves of period λ with these amplitudes and signs (the book refers to Fig. 35 of the problem book, p. 332; not redrawn here).
(b) Take a parallelepiped of unit cross-section and length dx with edges at x and x + dx. After the oscillation the edge at x goes to x + ξ(x) and the edge at x + dx goes to x + dx + ξ(x + dx) = x + dx + ξ(x) + (∂ξ/∂x)dx. Thus the volume of the element (originally dx) becomes (1 + ∂ξ/∂x)dx, and hence the density becomes ρ = ρ0/(1 + ∂ξ/∂x). Substituting, we get the ρ(x) curves of Fig. 35.
(c) The velocity at t = T/4 is (∂ξ/∂t)t=T/4 = −aω cos kx. On plotting we get Fig. 36 of the book: a cosine curve of amplitude aω, negative at the antinodes where cos kx = +1 (velocity along −x for longitudinal, along −y for transverse oscillations) and positive at the neighbouring antinodes where cos kx = −1.
Corrected: the signs printed for ∂ξ/∂x at t = 0 and T/2 were reversed relative to the formula; they are given correctly above.
Teacher's Note: In a standing wave all particles pass equilibrium together at T/4; density changes are largest at displacement nodes.
Exam Note: Differentiate ξ for strain and velocity; density = ρ0/(1 + ∂ξ/∂x).
Question 165. A longitudinal standing wave ξ = a cos kx · cos ωt is maintained in a homogeneous medium of density ρ. Find the expressions for the space density of (a) potential energy wp(x, t); (b) kinetic energy wk(x, t). Plot the space density distribution of the total energy w in the space between the displacement nodes at the moments t = 0 and t = T/4, where T is the oscillation period.
Solution. (a) The potential energy density (per unit volume) is the energy of longitudinal strain: wp = (1/2)(stress × strain) = (1/2)E(∂ξ/∂x)², where ∂ξ/∂x is the longitudinal strain. So wp = (1/2)E a²k² sin²kx cos²ωt. But ω²/k² = E/ρ, i.e. Ek² = ρω². Thus wp = (1/2)ρa²ω² sin²kx cos²ωt.
(b) The kinetic energy density is wk = (1/2)ρ(∂ξ/∂t)² = (1/2)ρa²ω² cos²kx sin²ωt.
The total energy density is w = wp + wk. On plotting we get Fig. 37 of the problem book (p. 332; not redrawn here). For example, at t = 0, w = wp = (1/2)ρa²ω² sin²kx, and at t = T/4, w = wk = (1/2)ρa²ω² cos²kx. The displacement nodes are at x = ±π/2k.
Teacher's Note: Energy sloshes between potential (at nodes, max strain) and kinetic (at antinodes) twice per period.
Exam Note: Write wp, wk with Ek² = ρω².
Question 166. A string 120 cm in length sustains a standing wave, with the points of the string at which the displacement amplitude is equal to 3.5 mm being separated by 15.0 cm. Find the maximum displacement amplitude. To which overtone do these oscillations correspond?
Solution. Denote the displacement of the elements of the string by ξ = a sin kx cos ωt. Since the string is 120 cm long, k·120 = nπ. If x1 is the distance at which the displacement amplitude first equals 3.5 mm, then kx1 + 15k = π − kx1, i.e. kx1 = (π − 15k)/2.
One can convince oneself that the string has the form of four loops (the book's figure shows the equal-amplitude points spaced 7.5, 15, 15, … , 15, 7.5 cm along the 120 cm string, the 15 cm gaps lying alternately across a node and across an antinode). It shows that k × 120 = 4π, so k = π/30 cm−1. Thus we are dealing with the third overtone (the fourth harmonic).
Also kx1 = π/4, so a sin(π/4) = 3.5 mm, giving a = 3.5√2 mm = 4.949 mm ≈ 5.0 mm.
Teacher's Note: With four loops, equal-amplitude points sit at kx = π/4, so a = 3.5 mm × √2.
Exam Note: Four loops fix k; amplitude = 3.5√2 mm.
Question 167. Find the ratio of the fundamental tone frequencies of two identical strings after one of them was stretched by η1 = 2.0% and the other by η2 = 4.0%. The tension is assumed to be proportional to the elongation.
Solution. We have ν = (1/2l)√(T/m) = (1/2l)√(Tl/M), where m is the mass per unit length and M the total mass of the wire. When the wire is stretched, the total mass of the wire remains constant. For the first wire the new length is l + η1l, and for the second it is l + η2l. Also T1 = α(η1l) and T2 = α(η2l), where α is a constant. Substituting in the formula:
ν1 = [1/(2(l + η1l))]·√[(αη1l)(l + η1l)/M], ν2 = [1/(2(l + η2l))]·√[(αη2l)(l + η2l)/M].
Therefore ν2/ν1 = √[η2(1 + η1)/(η1(1 + η2))] = √[0.04(1 + 0.02)/(0.02(1 + 0.04))] = 1.4.
Teacher's Note: Fundamental depends on √(T/(length × total mass)); mass is unchanged on stretching.
Exam Note: Mass constant on stretching; T ∝ η; ratio 1.4.
Question 168. Determine in what way and how many times will the fundamental tone frequency of a stretched wire change if its length is shortened by 35% and the tension increased by 70%.
Solution. Let the initial length and tension be l and T respectively. So ν1 = (1/2l)√(T/ρ1), where ρ1 is the mass per unit length. In accordance with the problem, the new length l' = l − 35l/100 = 0.65l and the new tension T' = T + 70T/100 = 1.7T. Thus the new frequency ν2 = (1/2l')√(T'/ρ1) = [1/(2 × 0.65l)]√(1.7T/ρ1).
Hence ν2/ν1 = √1.7/0.65 = 1.3/0.65 = 2. The frequency increases 2 times.
Teacher's Note: Fundamental ∝ √T / l: shorter and tighter both raise it.
Exam Note: State ν = (1/2l)√(T/ρ); substitute 0.65l and 1.7T; say 'increases'.
Question 169. To determine the sound propagation velocity in air by the acoustic resonance technique one can use a pipe with a piston and a sonic membrane closing one of its ends. Find the velocity of sound if the distance between the adjacent positions of the piston at which resonance is observed at a frequency ν = 2000 Hz is equal to l = 8.5 cm.
Solution. Obviously in this case the velocity of sound propagation is v = 2ν(l2 − l1), where l2 and l1 are consecutive lengths at which resonance occurs. In our problem, (l2 − l1) = l. So v = 2νl = 2 × 2000 × 8.5 cm/s = 0.34 km/s.
Teacher's Note: Adjacent resonances of a closed pipe differ in length by half a wavelength.
Exam Note: Spacing = λ/2, so v = 2νl; convert cm to m.
Question 170. Find the number of possible natural oscillations of air column in a pipe whose frequencies lie below ν0 = 1250 Hz. The length of the pipe is l = 85 cm. The velocity of sound is v = 340 m/s. Consider the two cases: (a) the pipe is closed from one end; (b) the pipe is opened from both ends. The open ends of the pipe are assumed to be the antinodes of displacement.
Solution. (a) When the tube is closed at one end, ν = (v/4l)(2n + 1), where n = 0, 1, 2, …, i.e. ν = [340/(4 × 0.85)](2n + 1) = 100(2n + 1) Hz. Thus for n = 0, 1, 2, … we get ν1 = 100 Hz, ν2 = 300 Hz, ν3 = 500 Hz, ν4 = 700 Hz, ν5 = 900 Hz, ν6 = 1100 Hz, ν7 = 1300 Hz. Since ν must be less than ν0 = 1250 Hz, we need not go beyond ν6. Thus 6 natural oscillations are possible.
(b) A pipe open at both ends vibrates with all harmonics of the fundamental ν = v/2l (end correction neglected): ν = n(v/2l) = 200n Hz. The frequencies below 1250 Hz are 200, 400, 600, 800, 1000, 1200 Hz, so there are again 6 possible natural oscillations in the open pipe.
Teacher's Note: Closed pipe: odd multiples of v/4l only; open pipe: all multiples of v/2l.
Exam Note: List frequencies below the limit and count: 6 for each case.
Elastic Waves. Acoustics (Part 2)
Question 171. A copper rod of length l = 50 cm is clamped at its midpoint. Find the number of natural longitudinal oscillations of the rod in the frequency range from 20 to 50 kHz. What are those frequencies equal to?
Solution. Since the copper rod is clamped at its mid-point, that point is a node and the two free ends are antinodes. The fundamental mode formed in the rod has l = λ/2 (one node at the middle, antinodes at both ends), so ν0 = v/2l = (1/2l)√(E/ρ), where E is Young's modulus and ρ the density of copper. The second mode (first overtone) has l = 3λ/2, so ν1 = 3v/2l = (3/2l)√(E/ρ). In general ν = [(2n + 1)/2l]√(E/ρ), n = 0, 1, 2, …
Putting in the given values of E and ρ, ν = 3.8(2n + 1) kHz. Hence ν0 = 3.8 kHz, ν1 = 11.4 kHz, ν2 = 19 kHz, ν3 = 26.6 kHz, ν4 = 34.2 kHz, ν5 = 41.8 kHz, ν6 = 49.4 kHz and ν7 = 3.8 × 15 = 57 kHz > 50 kHz.
Hence the number of frequencies between 20 and 50 kHz is 4: 26.6, 34.2, 41.8 and 49.4 kHz.
Corrected: the book's last line lists ν7 as 3.8 × 14 kHz; the correct value is 3.8 × 15 = 57 kHz, still above 50 kHz (the count of 4 is unchanged).
Teacher's Note: Clamped midpoint is a node; only odd harmonics of v/2l fit with free ends as antinodes.
Exam Note: Odd multiples (2n+1) of v/2l; count those inside 20–50 kHz.
Question 172. A string of mass m is fixed at both ends. The fundamental tone oscillations are excited with circular frequency ω and maximum displacement amplitude amax. Find: (a) the maximum kinetic energy of the string; (b) the mean kinetic energy of the string averaged over one oscillation period.
Solution. Let two waves ξ1 = a cos(ωt − kx) and ξ2 = a cos(ωt + kx) superpose, giving a standing wave ξ = 2a cos kx cos ωt. According to the problem 2a = am (= amax). Hence ξ = am cos kx cos ωt (1), or ∂ξ/∂t = −ωam cos kx sin ωt. (2)
The kinetic energy of a string element of length dx is dT = (1/2)(m/l)dx (∂ξ/∂t)² = (m am²ω²/2l) sin²ωt cos²(2πx/λ) dx. Hence the kinetic energy of the string corresponding to the fundamental tone is T = (m am²ω²/2l) sin²ωt ∫0λ/2 cos²(2πx/λ) dx. For the fundamental tone, l = λ/2, so the integral is l/2 and T = (1/4) m am²ω² sin²ωt.
(a) Hence Tmax = (1/4) m am²ω², since sin²ωt = 1 for Tmax.
(b) The mean kinetic energy over one period: ⟨T⟩ = (1/4) m am²ω² · ∫02π/ω sin²ωt dt / ∫02π/ω dt = (1/8) m am²ω².
Teacher's Note: Mean of sin² over a period is 1/2; mass distribution along the loop gives the factor 1/4.
Exam Note: Sum over elements: ∫cos² over a half-wavelength = l/2; then average sin².
Question 173. A standing wave ξ = a sin kx · cos ωt is maintained in a homogeneous rod with cross-sectional area S and density ρ. Find the total mechanical energy confined between the sections corresponding to the adjacent displacement nodes.
Solution. We have ξ = a sin kx cos ωt, so ∂ξ/∂t = −aω sin kx sin ωt (1) and ∂ξ/∂x = ak cos kx cos ωt. (2)
The kinetic energy confined in an element of length dx is dT = (1/2)(ρS dx)(∂ξ/∂t)² = (1/2)ρSa²ω² sin²ωt sin²kx dx. So the total kinetic energy between adjacent nodes (length λ/2) is T = (1/2)ρSa²ω² sin²ωt ∫0λ/2 sin²(2πx/λ) dx = πρSa²ω² sin²ωt/(4k). (3)
The potential energy density of an elastically strained rod is UD = (1/2)(stress × strain) = (1/2)Yε² = (1/2)ρv²ε² = (1/2)(ρω²/k²)(∂ξ/∂x)² = (1/2)ρa²ω² cos²ωt cos²kx. Hence the total potential energy is U = ∫UD S dx = (1/2)ρSa²ω² cos²ωt ∫0λ/2 cos²kx dx = πρSa²ω² cos²ωt/(4k). (The same result follows from the work of the restoring force on each element: dU = (1/2)ρω²S ξ² dx.)
Hence the sought mechanical energy confined between the two adjacent nodes is E = T + U = πρω²a²S/(4k), which is independent of time.
Teacher's Note: Between adjacent nodes kinetic and potential energies trade off but their sum stays constant.
Exam Note: Integrate energy densities over λ/2; sin² + cos² = 1 removes time.
Question 174. A source of sonic oscillations with frequency ν0 = 1000 Hz moves at right angles to the wall with a velocity u = 0.17 m/s. Two stationary receivers R1 and R2 are located on a straight line, coinciding with the trajectory of the source, in the following succession: R1–source–R2–wall. Which receiver registers the beatings and what is the beat frequency? The velocity of sound is equal to v = 340 m/s.
Solution. Receiver R1 registers the beating, because the sound reaches it both directly from the source and after reflection from the wall.
Frequency of sound reaching R1 directly: νS→R1 = ν0v/(v − u) when S moves towards R1, and ν'S→R1 = ν0v/(v + u) when S moves towards the wall.
Frequency reaching R1 after reflection from the wall: νW→R1 = ν0v/(v + u) when S moves towards R1, and ν'W→R1 = ν0v/(v − u) when S moves towards the wall.
Thus the sought beat frequency Δν = νS→R1 − νW→R1 (or ν'W→R1 − ν'S→R1) = ν0v/(v − u) − ν0v/(v + u) = 2ν0vu/(v² − u²) ≈ 2uν0/v = 1 Hz.
Teacher's Note: Direct and reflected sounds reach R1 with Doppler shifts of opposite sign, so they beat.
Exam Note: Identify R1; apply Doppler to direct and reflected paths; subtract.
Question 175. A stationary observer receives sonic oscillations from two tuning forks, one of which approaches, and the other recedes with the same velocity. As this takes place, the observer hears beatings with frequency ν = 2.0 Hz. Find the velocity of each tuning fork if their oscillation frequency is ν0 = 680 Hz and the velocity of sound in air is v = 340 m/s.
Solution. Let the velocity of each tuning fork be u. The frequency reaching the observer from the fork that approaches is ν' = ν0v/(v − u), and from the fork that recedes ν'' = ν0v/(v + u).
So the beat frequency ν = ν' − ν'' = ν0v[1/(v − u) − 1/(v + u)] = 2ν0vu/(v² − u²).
So νu² + 2vν0u − v²ν = 0, hence u = [−2vν0 ± √(4ν0²v² + 4v²ν²)]/(2ν). Noting that u > 0 and simplifying, u = (vν0/ν)[√(1 + (ν/ν0)²) − 1] = 0.5 m/s.
Teacher's Note: Beats come from the Doppler shifts of the two forks; solve the resulting quadratic for u.
Exam Note: Write both Doppler frequencies, subtract, solve quadratic, reject negative root.
Question 176. A receiver and a source of sonic oscillations of frequency ν0 = 2000 Hz are located on the x axis. The source swings harmonically along that axis with a circular frequency ω and an amplitude a = 50 cm. At what value of ω will the frequency bandwidth registered by the stationary receiver be equal to Δν = 200 Hz? The velocity of sound is equal to v = 340 m/s.
Solution. Obviously the maximum frequency is heard when the source is moving with maximum velocity towards the receiver, and the minimum frequency when it recedes with maximum velocity. As the source swings harmonically, its maximum velocity equals aω. Hence νmax = ν0v/(v − aω) and νmin = ν0v/(v + aω).
So the frequency bandwidth Δν = νmax − νmin = ν0v·2aω/(v² − a²ω²), or (Δν a²)ω² + (2ν0va)ω − Δν v² = 0.
So ω = [−2ν0va ± √(4ν0²v²a² + 4Δν²a²v²)]/(2Δν a²). Taking the + sign (as ω → 0 if Δν → 0) and simplifying, ω = (vν0/(Δν a))[√(1 + (Δν/ν0)²) − 1] = 34 s−1 (rad/s).
Teacher's Note: Bandwidth is set by the speed extremes of the swinging source, which is aω at the mean position.
Exam Note: Max speed = aω; subtract Doppler extremes; solve quadratic; pick positive root.
Question 177. A source of sonic oscillations with frequency ν0 = 1700 Hz and a receiver are located at the same point. At the moment t = 0 the source starts receding from the receiver with acceleration w = 10.0 m/s². Assuming the velocity of sound to be equal to v = 340 m/s, find the oscillation frequency registered by the stationary receiver t = 10.0 s after the start of motion.
Solution. The frequency emitted by the source at time t cannot be received at the same moment by the receiver, because up to that time the source covers a distance wt²/2 and the sound wave takes a further time (wt²/2)/v to reach the receiver. Therefore the frequency noted by the receiver at time t was emitted by the source at an earlier time t1 < t, where t1 + (wt1²/2)/v = t. (1)
The frequency noted by the receiver is ν = ν0v/(v + wt1). (2)
Solving (1): t1 = (v/w)[√(1 + 2wt/v) − 1], so v + wt1 = v√(1 + 2wt/v). Then from (2), ν = ν0/√(1 + 2wt/v) = 1700/√(1 + 2 × 10 × 10/340) = 1.35 kHz.
Teacher's Note: Signal received at t was emitted earlier; use the retarded time t1, not t.
Exam Note: Solve the quadratic for emission time first, then apply the Doppler formula.
Question 178. A source of sound with natural frequency ν0 = 1.8 kHz moves uniformly along a straight line separated from a stationary observer by a distance l = 250 m. The velocity of the source is equal to η = 0.80 fraction of the velocity of sound. Find: (a) the frequency of sound received by the observer at the moment when the source gets closest to him; (b) the distance between the source and the observer at the moment when the observer receives a frequency ν = ν0.
Solution. (a) When the observer receives the sound at the moment the source is closest to him, that sound was emitted by the source some time earlier (see the figure: the source S is at an angle θ, approaching the observer O with velocity vs cos θ along the line of sight). Hence the frequency noted by the observer is ν = ν0v/(v − vs cos θ) = ν0/(1 − η cos θ). (1)
But the time x/vs for the source to reach the closest point equals the sound travel time √(l² + x²)/v, so x/√(l² + x²) = vs/v = η, which means cos θ = η. (2)
Hence from (1) and (2) the sought frequency ν = ν0/(1 − η²) = 5 kHz.
(b) When the source is right in front of O (θ = 90°), the sound emitted by it is not Doppler shifted (ν = ν0). This sound is received at O at time t = l/v after the source has passed that point. The source will by then have moved ahead by a distance vst = lη. The distance between the source and the observer at this time will be l√(1 + η²) = 0.32 km.
Teacher's Note: Doppler shift depends only on the velocity component along the line joining source and observer.
Exam Note: Cos θ = η; (b) unshifted sound, add source travel.
Question 179. A stationary source sends forth monochromatic sound. A wall approaches it with velocity u = 33 cm/s. The propagation velocity of sound in the medium is v = 330 m/s. In what way and how much, in per cent, does the wavelength of sound change on reflection from the wall?
Solution. The frequency of sound when it reaches the wall is ν' = ν(v + u)/v. The wall reflects the sound with the same frequency ν'; the wall behaves as a moving source of frequency ν'. Thus the frequency noticed by a stationary observer after reflection is ν'' = ν'·v/(v − u) = ν(v + u)/(v − u).
Or λ'' = λ(v − u)/(v + u), i.e. λ''/λ = (v − u)/(v + u). So 1 − λ''/λ = 2u/(v + u).
Hence the sought percentage change in wavelength is (λ − λ'')/λ × 100 = [2u/(v + u)] × 100% = 0.2% decrease.
Teacher's Note: A receding-to-approaching wall acts twice: as a moving observer, then as a moving source.
Exam Note: Apply the Doppler formula twice; wavelength decreases by 2u/(v+u).
Question 180. A source of sonic oscillations with frequency ν0 = 1700 Hz and a receiver are located on the same normal to a wall. Both the source and the receiver are stationary, and the wall recedes from the source with velocity u = 6.0 cm/s. Find the beat frequency registered by the receiver. The velocity of sound is equal to v = 340 m/s.
Solution. The frequency of sound reaching the wall is ν = ν0(v − u)/v. (1) Now for the observer the wall becomes a source of frequency ν receding from it with velocity u. Thus the frequency reaching the observer is ν' = ν·v/(v + u) = ν0(v − u)/(v + u) [using (1)].
Hence the beat frequency registered by the receiver is Δν = ν0 − ν' = 2uν0/(v + u) = 0.6 Hz.
Teacher's Note: Reflection from a receding wall: observer-Doppler then source-Doppler, both lowering the frequency.
Exam Note: Two Doppler steps; beat = ν0 minus the reflected frequency.
Question 181. Find the damping coefficient γ of a sound wave if at distances r1 = 10 m and r2 = 20 m from a point isotropic source of sound the sound wave intensity values differ by a factor η = 4.5.
Solution. The intensity of a spherical sound wave emitted from a point source in a homogeneous absorbing medium of damping coefficient γ is I = (1/2)ρ(a²e−2γr/r²)ω²v, where a is a constant. So the intensity at r1 is I1 = (1/2)ρa²e−2γr1ω²v/r1², and at r2 it is I2 = (1/2)ρa²e−2γr2ω²v/r2². According to the problem, I1/I2 = η, so η = (r2²/r1²)e2γ(r2 − r1), i.e. ηr1²/r2² = e2γ(r2 − r1), or ln(ηr1²/r2²) = 2γ(r2 − r1).
Hence γ = ln(ηr1²/r2²)/[2(r2 − r1)] = ln(4.5/4)/20 = 6×10−3 m−1.
Teacher's Note: Intensity falls by 1/r² (geometry) times e−2γr (absorption); only the second is damping.
Exam Note: Remove the 1/r² part before taking the log; intensity decays as e−2γr.
Question 182. A plane sound wave propagates along the x axis. The damping coefficient of the wave is γ = 0.0230 m−1. At the point x = 0 the loudness level is L = 60 dB. Find: (a) the loudness level at a point with coordinate x = 50 m; (b) the coordinate x of the point at which the sound is not heard any more.
Solution. (a) The loudness level in bels is log(I/I0) (I0 is the threshold of audibility), so in decibels L = 10 log(I/I0). Thus at x1, L1 = 10 log(I1/I0), and at x2, L2 = 10 log(I2/I0). Hence L2 − L1 = 10 log(I2/I1) = 10 log e−2γ(x2 − x1), so L2 = L1 − 20γ(x2 − x1) log e.
Hence L' = L − 20γx log e = 60 dB − 20 × 0.023 × 50 × 0.4343 dB = 60 dB − 10 dB = 50 dB.
(b) At the point where the sound is not heard any more, the loudness level is zero. Thus 0 = L − 20γx log e, or x = L/(20γ log e) = 60/(20 × 0.023 × 0.4343) = 300 m.
Teacher's Note: Plane-wave intensity decays as e−2γx, so level drops linearly in dB with distance.
Exam Note: Level falls 8.69γx dB; inaudible at zero.
Question 183. At a distance r0 = 20.0 m from a point isotropic source of sound the loudness level is L0 = 30.0 dB. Neglecting the damping of the sound wave, find: (a) the loudness level at a distance r = 10.0 m from the source; (b) the distance from the source at which the sound is not heard.
Solution. (a) As there is no damping, I ∝ 1/r². Then Lr − Lr0 = 10 log(I/Ir0) = 20 log(r0/r), so Lr = Lr0 + 20 log(r0/r) = 30 + 20 log(20/10) = 36 dB.
(b) Let r be the distance at which the sound is not heard, i.e. Lr = 0: 0 = L0 + 20 log(r0/r), or 30 = 20 log(r/20). So log10(r/20) = 3/2, or r/20 = 103/2, giving r = 200√10 m = 0.63 km. Thus for r > 0.63 km no sound will be heard.
Teacher's Note: Inverse-square law gives 20 log(r0/r) dB change; doubling distance costs about 6 dB.
Exam Note: Use L change = 20 log ratio; inaudible at L = 0.
Question 184. An observer A located at a distance rA = 5.0 m from a ringing tuning fork notes the sound to fade away τ = 19 s later than an observer B who is located at a distance rB = 50 m from the tuning fork. Find the damping coefficient β of oscillations of the tuning fork. The sound velocity v = 340 m/s.
Solution. We treat the fork as a point source. In the absence of damping the oscillation has the form (const/r) cos(ωt − kr). Because of the damping of the fork, the amplitude of oscillation decreases exponentially with the retarded time (the time at which the wave started from the source). Thus ξ = (const/r) e−β(t − r/v) cos(ωt − kr) for the amplitude factor.
The sound fades away at each observer when the amplitude reaches the same threshold value. This means that e−β(t + τ − rA/v)/rA = e−β(t − rB/v)/rB (t being the instant B stops hearing it). Thus e−β(τ + (rB − rA)/v) = rA/rB, or β = ln(rB/rA)/[τ + (rB − rA)/v] = ln 10/(19 + 45/340) = 0.12 s−1.
Teacher's Note: Fade-out is a threshold on amplitude; include both the 1/r fall and sound travel-time delay.
Exam Note: Equate threshold amplitudes at the retarded times; include (rB − rA)/v.
Question 185. A plane longitudinal harmonic wave propagates in a medium with density ρ. The velocity of the wave propagation is v. Assuming the density variations of the medium, induced by the propagating wave, Δρ ≪ ρ, demonstrate that (a) the pressure increment in the medium Δp = −ρv²(∂ξ/∂x), where ∂ξ/∂x is the relative deformation; (b) the wave intensity is defined by Eq. (4.3i), i.e. I = (Δp)m²/(2ρv).
Solution. (a) Consider the motion of an element of the medium of thickness dx and unit area of cross-section. Let ξ be the displacement of the particles of the medium at location x. By the equation of motion, ρ dx ξ̈ = −dp, where dp is the pressure increment over the length dx. Recalling the wave equation ξ̈ = v² ∂²ξ/∂x², we can write ρv² (∂²ξ/∂x²) dx = −dp. Integrating, Δp = −ρv² ∂ξ/∂x + const. In the absence of deformation (no wave) Δp = 0, so const = 0 and Δp = −ρv² ∂ξ/∂x.
(b) The total energy density is w = wk + wp, with wk = (1/2)ρ(∂ξ/∂t)² and wp = (1/2)E(∂ξ/∂x)² = (1/2)ρv²(∂ξ/∂x)². The space-time averages of both densities are the same, so ⟨w⟩ = ⟨ρv²(∂ξ/∂x)²⟩. The intensity is I = v⟨w⟩ = ⟨(Δp)²⟩/(ρv). Using ⟨(Δp)²⟩ = (1/2)(Δp)m², we get I = (Δp)m²/(2ρv).
Teacher's Note: Pressure excess is −ρv² times strain; intensity = v × mean energy density.
Exam Note: Integrate the equation of motion; use equal mean kinetic and potential energies.
Question 186. A ball of radius R = 50 cm is located in the way of propagation of a plane sound wave. The sonic wavelength is λ = 20 cm, the frequency is ν = 1700 Hz, the pressure oscillation amplitude in air is (Δp)m = 3.5 Pa. Find the mean energy flow, averaged over an oscillation period, reaching the surface of the ball.
Solution. The intensity of the sound wave is I = (Δp)m²/(2ρv) = (Δp)m²/(2ρνλ), using v = νλ, where ρ is the density of air (1.293 kg/m³). The effective area of the ball is its cross-section πR² (the sound meeting the ball passes through this projected disc). Thus the mean energy flow reaching the ball is πR²I = πR²(Δp)m²/(2ρνλ). Substitution gives 10.9 mW.
Teacher's Note: Power intercepted equals intensity times the ball's projected area πR², not its surface area.
Exam Note: Compute I from pressure amplitude, multiply by πR²; v = νλ.
Question 187. A point A is located at a distance r = 1.5 m from a point isotropic source of sound of frequency ν = 600 Hz. The sonic power of the source is P = 0.80 W. Neglecting the damping of the waves and assuming the velocity of sound in air to be equal to v = 340 m/s, find at the point A: (a) the pressure oscillation amplitude (Δp)m and its ratio to the air pressure; (b) the oscillation amplitude of particles of the medium; compare it with the wavelength of sound.
Solution. (a) We have P/4πr² = intensity = (Δp)m²/(2ρv), so (Δp)m = √(ρvP/2πr²) = √[1.293 × 340 × 0.80/(2π × 1.5 × 1.5)] = 4.99 ≈ 5 Pa. The ratio (Δp)m/p = 5×10−5 (with p ≈ 1.0×105 Pa).
(b) Δp = −ρv²∂ξ/∂x, so (Δp)m = ρv²kξm = ρv·2πν·ξm. Thus ξm = a = (Δp)m/(2πρvν) = 5/(2π × 1.293 × 340 × 600) = 3 µm. And ξm/λ = 3×10−6/(340/600) ≈ 5×10−6.
Teacher's Note: Intensity P/4πr² gives pressure amplitude; displacement amplitude then follows from Δp = ρvωξm.
Exam Note: Use I = (Δp)m²/2ρv, then ξm = (Δp)m/(ρvω); mind units.
Question 188. At a distance r = 100 m from a point isotropic source of sound of frequency 200 Hz the loudness level is equal to L = 50 dB. The audibility threshold at this frequency corresponds to the sound intensity I0 = 0.10 nW/m². The damping coefficient of the sound wave is γ = 5.0×10−4 m−1. Find the sonic power of the source.
Solution. Express L in bels (L = 5 bels). Then the intensity at the point at distance r from the source is I0·10L. Had there been no damping, the intensity would have been e2γr·I0·10L. Now this must equal P/4πr², where P is the sonic power of the source. Thus P/4πr² = e2γr I0·10L, or P = 4πr² e2γr I0·10L = 4π × 104 × e0.1 × 10−10 × 105 = 1.39 W.
Teacher's Note: Undamped intensity P/4πr² is higher than observed by e2γr; observed I comes from the dB level.
Exam Note: Convert 50 dB to I = I0·105; restore the e2γr loss.
IE Irodov Solutions for JEE Mathematics: IE Irodov Solutions Chapter 25 Elastic Waves
Complete Math Solutions for IE Irodov Solutions Chapter 25 Elastic Waves
Explore reliable mathematical solutions for IE Irodov Solutions Chapter 25 Elastic Waves tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Mastering Core Concepts with IE Irodov Solutions
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Explore More Study Resources for JEE Math
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.