Official IE Irodov Textbook Solutions: JEE Physics Chapter 12 The Second Law Of Thermodynamics Entropy
Review structured textbook solutions for JEE Physics Chapter 12 The Second Law Of Thermodynamics Entropy prepared by IE Irodov. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Chapter-wise Solutions for Physics: Chapter 12 The Second Law Of Thermodynamics Entropy
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
12. The Second Law of Thermodynamics. Entropy - Questions 113-159
Part 1
Question 113. In which case will the efficiency of a Carnot cycle be higher: when the hot body temperature is increased by ΔT, or when the cold body temperature is decreased by the same magnitude?
Solution. The efficiency is η = (T1 − T2)/T1, T1 > T2. In the two cases the efficiencies are
ηh = (T1 + ΔT − T2)/(T1 + ΔT) (T1 increased),
ηl = (T1 − T2 + ΔT)/T1 (T2 decreased).
Thus ηh < ηl: lowering the cold-body temperature gives the higher efficiency.
Teacher's Note: Write η = 1 − T2/T1; raising T1 changes the ratio less than lowering T2 by the same ΔT.
Exam Note: Compare both efficiencies explicitly; state the conclusion.
Question 114. Hydrogen is used in a Carnot cycle as a working substance. Find the efficiency of the cycle, if as a result of an adiabatic expansion
(a) the gas volume increases n = 2.0 times;
(b) the pressure decreases n = 2.0 times.
Solution. For H2, γ = 7/5. Label the cycle 1→2 (isothermal expansion, heat Q1 taken in), 2→3 (adiabatic expansion), 3→4 (isothermal compression, heat Q2′ given out), 4→1 (adiabatic compression). Then p1V1 = p2V2, p3V3 = p4V4, p2V2γ = p3V3γ, p1V1γ = p4V4γ.
(a) Define n by V3 = nV2. Then p3 = p2n−γ, so p4V4 = p3V3 = p2V2n1−γ = p1V1n1−γ. From p4V4γ = p1V1γ we get V4 = nV1. Hence Q1 = p2V2 ln(V2/V1) and Q2′ = p3V3 ln(V3/V4) = p2V2n1−γ ln(V2/V1), since V3/V4 = V2/V1.
Finally η = 1 − Q2′/Q1 = 1 − n1−γ = 1 − 2−0.4 = 0.242 (≈ 24%).
(b) Define n by p3 = p2/n. Then p2V2γ = (p2/n)V3γ, i.e. V3 = n1/γV2. So the formulae of case (a) hold with n → n1/γ:
η = 1 − n(1/γ)−1 = 1 − n−2/7 = 0.18.
Teacher's Note: The isothermal volume ratios on both isotherms are equal; only the adiabatic ratio n^(1−γ) survives in η.
Exam Note: Use γ = 7/5 for hydrogen; give numeric values.
Question 115. A heat engine employing a Carnot cycle with an efficiency of η = 10% is used as a refrigerating machine, the thermal reservoirs being the same. Find its refrigerating efficiency ε.
Solution. Run in reverse, the engine takes Q2′ from the cold body, and the work A = Q1 − Q2′ is done on the gas. The refrigerating efficiency of a heat engine is
ε = Q2′/A = Q2′/(Q1 − Q2) = (Q2′/Q1)/(1 − Q2′/Q1) = (1 − η)/η = 9 here,
where η is the efficiency of the heat engine.
Teacher's Note: Reversing the cycle keeps Q1 and Q2 the same, so ε = (1 − η)/η.
Exam Note: Quote ε = (1−η)/η and the value 9.
Question 116. An ideal gas goes through a cycle consisting of alternate isothermal and adiabatic curves (Fig. 2.2). The isothermal processes proceed at the temperatures T1, T2 and T3. Find the efficiency of such a cycle, if in each isothermal expansion the gas volume increases in the same proportion.
Solution. (Fig. 2.2 shows the cycle: isothermal expansion at T1 (1→2), adiabatic expansion to T2 (2→3), isothermal expansion at T2 (3→4), adiabatic expansion to T3 (4→5), isothermal compression at T3 (5→6), adiabatic compression back to state 1.)
Given V2 = nV1, V4 = nV3. The heat taken in is Q1 = RT1 ln n + RT2 ln n = R(T1 + T2) ln n (per mole).
From the adiabatics T1V2γ−1 = T2V3γ−1, so V3 = (T1/T2)1/(γ−1)V2; similarly V5 = (T2/T3)1/(γ−1)V4 and V6 = (T1/T3)1/(γ−1)V1.
The heat ejected at the lowest temperature is
Q2 = −RT3 ln(V6/V5) = −RT3 ln[(T1/T2)1/(γ−1)V1/V4] = −RT3 ln[(T1/T2)1/(γ−1)V2/(n2V3)] = −RT3 ln[(1/n2)] = 2RT3 ln n.
Thus η = 1 − 2T3/(T1 + T2).
Teacher's Note: Each adiabatic ratio cancels; the compression volume ratio is n², giving heat 2RT3 ln n.
Exam Note: Show Q1 and Q2 separately before dividing.
Question 117. Find the efficiency of a cycle consisting of two isochoric and two adiabatic lines, if the ideal gas changes n = 10 times in volume within the cycle. The working substance is nitrogen.
Solution. Label the cycle 1→2 (adiabatic expansion, V2 = nV1), 2→3 (isochoric cooling, heat Q2′ ejected), 3→4 (adiabatic compression), 4→1 (isochoric heating, heat Q1 taken).
Q2′ = CV(T2 − T3) = (CV/R)V2(p2 − p3), Q1 = (CV/R)V1(p1 − p4).
Thus η = 1 − V2(p2 − p3)/[V1(p1 − p4)].
On the other hand p1V1γ = p2V2γ, p3V2γ = p4V1γ, V2 = nV1, so p1 = p2nγ, p4 = p3nγ. Hence
η = 1 − n·n−γ = 1 − n1−γ, with γ = 7/5 for N2:
η = 1 − 10−0.4 = 0.60 (60%).
Teacher's Note: This is the Otto-cycle result: efficiency depends only on the volume ratio and γ.
Exam Note: Use γ = 7/5 for diatomic nitrogen.
Question 118. Find the efficiency of a cycle consisting of two isobaric and two adiabatic lines, if the pressure changes n times within the cycle. The working substance is an ideal gas whose adiabatic exponent is equal to γ.
Solution. Label the cycle 1→2 (isobaric expansion at p1, heat Q1 taken), 2→3 (adiabatic expansion to p2), 3→4 (isobaric compression at p2, heat Q2′ ejected), 4→1 (adiabatic compression).
Q1 = (Cp/R)p1(V2 − V1), Q2′ = (Cp/R)p2(V3 − V4), so η = 1 − p2(V3 − V4)/[p1(V2 − V1)].
Now p1 = np2, p1V2γ = p2V3γ gives V3 = n1/γV2, and p2V4γ = p1V1γ gives V4 = n1/γV1. So
η = 1 − (1/n)·n1/γ = 1 − n(1/γ)−1.
Teacher's Note: Both adiabats scale volumes by n^(1/γ), so the heat ratio reduces to n^(1/γ)/n.
Exam Note: Write the final formula in terms of n and γ.
Question 119. An ideal gas whose adiabatic exponent equals γ goes through a cycle consisting of two isochoric and two isobaric lines. Find the efficiency of such a cycle, if the absolute temperature of the gas rises n times both in the isochoric heating and in the isobaric expansion.
Solution. Since the absolute temperature rises n times both in the isochoric heating and in the isobaric expansion, p1 = np2 and V2 = nV1. Let the lowest temperature be T1/n, the highest nT1 and the two intermediate temperatures T1.
Heat taken: Q1 = Q11 + Q12, with Q11 = Cp(n − 1)T1 (isobaric expansion at p1) and Q12 = CVT1(1 − 1/n) (isochoric heating at V1).
Heat rejected: Q2′ = Q21′ + Q22′, with Q21′ = CVT1(n − 1) (isochoric cooling at V2) and Q22′ = CpT1(1 − 1/n) (isobaric compression at p2).
η = 1 − Q2′/Q1 = 1 − [CV(n − 1) + Cp(1 − 1/n)]/[Cp(n − 1) + CV(1 − 1/n)]
= 1 − [n − 1 + γ(1 − 1/n)]/[γ(n − 1) + (1 − 1/n)] = 1 − (1 + γ/n)/(γ + 1/n) = 1 − (n + γ)/(1 + nγ).
Teacher's Note: Track all four legs: two isobaric and two isochoric, each with its own temperature change.
Exam Note: Show Q1 and Q2 as sums of two legs.
Question 120. An ideal gas goes through a cycle consisting of
(a) isochoric, adiabatic and isothermal lines;
(b) isobaric, adiabatic and isothermal lines, with the isothermal process proceeding at the minimum temperature of the whole cycle. Find the efficiency of each cycle if the absolute temperature varies n-fold within the cycle.
Solution. (a) The cycle: isothermal compression at T0 (heat Q2′ ejected), isochoric heating from T0 to nT0 (heat Q1 taken), then adiabatic expansion from nT0 back to T0. Here p2 = np1, p1V1 = p0V0 and np1V1γ = p0V0γ, so nV1γ−1 = V0γ−1, i.e. V1 = V0n−1/(γ−1).
Q2′ = RT0 ln(V0/V1) = RT0 ln n1/(γ−1) = RT0 ln n/(γ − 1), Q1 = CVT0(n − 1).
Using CV = R/(γ − 1): η = 1 − ln n/(n − 1).
(b) The cycle: isobaric expansion from T0 to nT0 (V2 = nV1, heat Q1 taken), adiabatic expansion from nT0 to T0, isothermal compression at T0 (heat Q2′ ejected). Here p1V1 = p0V0 and p1(nV1)γ = p0V0γ, i.e. nγV1γ−1 = V0γ−1, or V1 = n−γ/(γ−1)V0.
Q1 = CpT0(n − 1), Q2′ = RT0 ln(V0/V1) = RT0·[γ/(γ − 1)] ln n = CpT0 ln n.
Thus η = 1 − ln n/(n − 1) (the same as in (a)).
Teacher's Note: Isothermal heat is RT ln(V ratio); the adiabat fixes that ratio through n and γ.
Exam Note: Two cycles give the same expression; show both derivations.
Question 121. The conditions are the same as in the foregoing problem with the exception that the isothermal process proceeds at the maximum temperature of the whole cycle.
Solution. Here the isothermal process proceeds at the maximum temperature (instead of the minimum, as in Q.120).
(a) Cycle: isothermal expansion at T0 from (p0, V0) to (p1, V1), isochoric cooling to T0/n, adiabatic compression back. p1V1 = p0V0, p2 = p1/n, p2V1γ = p0V0γ, i.e. V1γ−1 = nV0γ−1 or V1 = V0n1/(γ−1).
Q2′ = CVT0(1 − 1/n), Q1 = RT0 ln(V1/V0) = [RT0/(γ − 1)] ln n = CVT0 ln n.
Thus η = 1 − Q2′/Q1 = 1 − (n − 1)/(n ln n).
(b) Cycle: isothermal expansion at T0 from (p0, V0) to (p1, V1), isobaric compression to T0/n (V2 = V1/n), adiabatic compression back. p0V0 = p1V1, p0V0γ = p1V2γ = p1n−γV1γ, which gives V1 = nγ/(γ−1)V0.
Q2′ = CpT0(1 − 1/n), Q1 = RT0 ln(V1/V0) = [Rγ/(γ − 1)]T0 ln n = CpT0 ln n.
Thus η = 1 − (n − 1)/(n ln n) (the same as in (a)).
Teacher's Note: Now the isotherm absorbs heat, so ln n is in the denominator; the other leg rejects Cx T0(1−1/n).
Exam Note: Compare with Q.120: roles of isotherm swapped.
Question 122. An ideal gas goes through a cycle consisting of isothermal, polytropic and adiabatic lines, with the isothermal process proceeding at the maximum temperature of the whole cycle. Find the efficiency of such a cycle if the absolute temperature varies n-fold within the cycle.
Solution. The section from (p1, V1, T0) to (p2, V2, T0/n) is a polytropic process of index α. We assume the corresponding specific heat C is positive. (The cycle: isothermal expansion at T0 from (p0, V0) to (p1, V1), polytropic cooling to (p2, V2, T0/n), adiabatic compression back to (p0, V0).)
Here dQ = C dT = CVdT + p dV. With pVα = const, i.e. TVα−1 = const, p dV = (RT/V)dV = −R dT/(α − 1). Then
C = CV − R/(α − 1) = R[1/(γ − 1) − 1/(α − 1)].
We have p1V1 = RT0 = np2V2, p0V0 = p1V1, p0V0γ = p2V2γ and p1V1α = p2V2α. These give V2 = V0n1/(γ−1) and V1 = n−1/(α−1)V2 = n1/(γ−1) − 1/(α−1)V0.
Now Q2′ = CT0(1 − 1/n), and Q1 = RT0 ln(V1/V0) = RT0[1/(γ − 1) − 1/(α − 1)] ln n = CT0 ln n.
Thus η = 1 − (n − 1)/(n ln n), independent of α.
Teacher's Note: The polytropic specific heat C appears in both Q1 and Q2 and cancels.
Exam Note: State that the result is independent of the polytropic index.
Question 123. An ideal gas with the adiabatic exponent γ goes through a direct (clockwise) cycle consisting of adiabatic, isobaric and isochoric lines. Find the efficiency of the cycle if in the adiabatic process the volume of the ideal gas (a) increases n-fold; (b) decreases n-fold.
Solution. (a) The cycle: isochoric heating from T1/n to T0 (heat Q1), adiabatic expansion from (p0, V0, T0) to (p1, nV0, T1), isobaric compression from T1 to T1/n (heat Q2′ ejected).
Q2′ = Cp(T1 − T1/n) = CpT1(1 − 1/n), Q1 = CV(T0 − T1/n).
Along the adiabatic line T0V0γ−1 = T1(nV0)γ−1, or T0 = T1nγ−1, so Q1 = CV(T1/n)(nγ − 1). Thus
η = 1 − γ(n − 1)/(nγ − 1).
(b) The cycle: adiabatic compression from (p0, V0, T0) to (p1, V0/n, T1), isobaric expansion from T1 to nT1 (heat Q1 taken) back to volume V0, isochoric cooling from nT1 to T0 (heat Q2′ ejected).
Here Q2′ = CV(nT1 − T0), Q1 = CpT1(n − 1). Along the adiabatic line T0V0γ−1 = T1(V0/n)γ−1, or T1 = nγ−1T0. Thus
η = 1 − (nγ − 1)/[γnγ−1(n − 1)].
Teacher's Note: Use T V^(γ−1) = const on the adiabat to relate the isobaric and isochoric temperatures.
Exam Note: Handle (a) and (b) separately; the heat legs differ.
Question 124. Calculate the efficiency of a cycle consisting of isothermal, isobaric and isochoric lines, if in the isothermal process the volume of the ideal gas with the adiabatic exponent γ (a) increases n-fold; (b) decreases n-fold.
Solution. (a) The cycle: isothermal expansion at T0 (V0 → nV0, heat Q1″ taken), isobaric compression at p0/n (heat Q2′ ejected), isochoric heating at V0 (heat Q1′ taken).
Q2′ = CpT0(1 − 1/n), Q1″ = RT0 ln n, Q1′ = CVT0(1 − 1/n), Q1 = Q1′ + Q1″.
η = 1 − Q2′/Q1 = 1 − Cp(1 − 1/n)/[CV(1 − 1/n) + R ln n] = 1 − γ/[1 + (R/CV)·n ln n/(n − 1)], so
η = 1 − γ(n − 1)/[n − 1 + (γ − 1)n ln n].
(b) The cycle: isothermal compression at T0 (V0 → V0/n, heat Q2‴ = RT0 ln n ejected), isobaric heating from T0 to nT0 (heat Q1 taken), isochoric cooling from nT0 to T0 (heat Q2″ ejected).
Q1 = CpT0(n − 1), Q2″ = CVT0(n − 1), Q2′ = Q2″ + Q2‴.
So η = 1 − Q2′/Q1 = 1 − [n − 1 + (γ − 1) ln n]/[γ(n − 1)].
Teacher's Note: Count which legs absorb heat; isothermal expansion absorbs, isothermal compression rejects.
Exam Note: Use C_V = R/(γ−1) to reach the final form.
Question 125. Find the efficiency of a cycle consisting of two isochoric and two isothermal lines if the volume varies ν-fold and the absolute temperature τ-fold within the cycle. The working substance is an ideal gas with the adiabatic exponent γ.
Solution. The cycle: isothermal expansion at τT0 (heat Q1′ taken), isochoric cooling from τT0 to T0 at volume νV0 (heat Q2″ ejected), isothermal compression at T0 (heat Q2‴ ejected), isochoric heating at V0 (heat Q1″ taken).
Q1′ = τRT0 ln ν, Q1″ = CVT0(τ − 1), Q1 = Q1′ + Q1″; Q2‴ = RT0 ln ν, Q2″ = CVT0(τ − 1), Q2′ = Q2″ + Q2‴.
η = 1 − Q2′/Q1 = 1 − [CV(τ − 1) + R ln ν]/[CV(τ − 1) + τR ln ν]. With CV = R/(γ − 1):
η = 1 − [(τ − 1)/(γ − 1) + ln ν]/[(τ − 1)/(γ − 1) + τ ln ν] = (τ − 1) ln ν/[τ ln ν + (τ − 1)/(γ − 1)].
Teacher's Note: The two isochoric legs exchange equal heat; only the isotherms differ, by factor τ.
Exam Note: Present numerator (τ−1)ln ν clearly.
Question 126. Find the efficiency of a cycle consisting of two isobaric and two isothermal lines if the pressure varies n-fold and the absolute temperature τ-fold within the cycle. The working substance is an ideal gas with the adiabatic exponent γ.
Solution. The cycle: isobaric expansion at the higher pressure nP0 from T0 to τT0 (heat Q1″ taken), isothermal expansion at τT0 (heat Q1′ taken), isobaric compression at P0 from τT0 to T0 (heat Q2″ ejected), isothermal compression at T0 (heat Q2‴ ejected).
Here Q1″ = CpT0(τ − 1), Q1′ = τRT0 ln n, and Q2″ = CpT0(τ − 1), Q2‴ = RT0 ln n. In addition Q1 = Q1′ + Q1″ and Q2′ = Q2″ + Q2‴.
η = 1 − Q2′/Q1 = 1 − [Cp(τ − 1) + R ln n]/[Cp(τ − 1) + τR ln n]. With Cp = γR/(γ − 1):
η = (τ − 1) ln n/[τ ln n + γ(τ − 1)/(γ − 1)].
Teacher's Note: Same structure as the isochoric case with C_p replacing C_V; the two isobaric legs cancel in heat flow.
Exam Note: Remember C_p = γR/(γ−1) when simplifying.
Question 127. An ideal gas with the adiabatic exponent γ goes through a cycle (Fig. 2.3) within which the absolute temperature varies τ-fold. Find the efficiency of this cycle.
Solution. (Fig. 2.3: a triangle on the p–V diagram. A is the state (p0, V0, T0); the gas goes B → C along a straight line through the origin of the p–V axes, C → A isochorically, A → B isobarically.)
Let B be (p0, V0/ν, T0/ν) and C be (νp0, V0, νT0) — the line BC is p = αV (p/p0 = νV/V0). The temperature ratio is τ = TC/TB = ν2, so ν = √τ.
Heat ejected: along CA, Q2″ = CVT0(√τ − 1); along AB, Q2‴ = CpT0(1 − 1/√τ) = Cp(T0/√τ)(√τ − 1). Thus
Q2′ = Q2″ + Q2‴ = [RT0/(γ − 1)](√τ − 1)(1 + γ/√τ).
Along BC, with p = αV, the specific heat C is given by C dT = CVdT + p dV = CVdT + d(αV2/2) = (CV + R/2) dT. Thus
Q1 = (CV + R/2)T0(√τ − 1/√τ) = ½RT0·[(γ + 1)/(γ − 1)]·(τ − 1)/√τ.
Finally η = 1 − Q2′/Q1 = 1 − 2(√τ + γ)/[(√τ + 1)(γ + 1)] = (γ − 1)(√τ − 1)/[(γ + 1)(√τ + 1)].
Teacher's Note: On the straight line p = αV the molar heat capacity is C_V + R/2; heat is absorbed throughout BC.
Exam Note: Find ν = √τ first; then sum heats.
Question 128. Making use of the Clausius inequality, demonstrate that all cycles having the same maximum temperature Tmax and the same minimum temperature Tmin are less efficient compared to the Carnot cycle with the same Tmax and Tmin.
Solution. We write the Clausius inequality in the form ∮ d1Q/T − ∮ d2Q/T ≤ 0, where d1Q is the heat transferred to the system and d2Q is the heat rejected by the system; both are positive, which explains the minus sign before d2Q.
In this inequality Tmax ≥ T ≥ Tmin, so 1/T ≥ 1/Tmax for the heat-intake terms and 1/T ≤ 1/Tmin for the heat-rejection terms. We can therefore write
∮ d1Q/Tmax − ∮ d2Q/Tmin ≤ ∮ d1Q/T − ∮ d2Q/T ≤ 0,
i.e. Q1/Tmax − Q2′/Tmin ≤ 0 (strictly less than 0 unless all heat is exchanged at Tmax and Tmin only, i.e. for the Carnot cycle). Thus
Q1/Tmax < Q2′/Tmin, or Tmin/Tmax < Q2′/Q1,
so η = 1 − Q2′/Q1 < 1 − Tmin/Tmax = ηCarnot.
Teacher's Note: Bound the heat-in integral using T_max and the heat-out integral using T_min, then rearrange.
Exam Note: State Clausius inequality, bound by extremes, conclude.
Question 129. Making use of the Carnot theorem, show that in the case of a physically uniform substance whose state is defined by the parameters T and V, (∂U/∂V)T = T(∂p/∂T)V − p, where U(T, V) is the internal energy of the substance. Instruction. Consider the infinitesimal Carnot cycle in the variables p, V.
Solution. We consider an infinitesimal Carnot cycle with isothermal processes at temperatures T + dT and T (isothermal 1→2 at T + dT between volumes V and V + dV, then adiabatic 2→3, isothermal 3→4 at T, and adiabatic 4→1). Let δA be the work done in the cycle and δQ1 the heat received at the higher temperature. Then by Carnot's theorem
δA/δQ1 = dT/T.
On the other hand, the work is the area of the thin cycle: δA = dp dV = (∂p/∂T)V dT dV.
The heat received in the isothermal expansion at T + dT is
δQ1 = dU12 + p dV = [(∂U/∂V)T + p] dV.
Substituting both in δA/δQ1 = dT/T gives (∂p/∂T)V dT dV / {[(∂U/∂V)T + p] dV} = dT/T. Hence
(∂U/∂V)T + p = T(∂p/∂T)V, i.e. (∂U/∂V)T = T(∂p/∂T)V − p.
Teacher's Note: Equate Carnot efficiency dT/T with δA/δQ1; δA is the thin-cycle area dp·dV.
Exam Note: Identify δA and δQ1 clearly; then substitute.
Question 130. Find the entropy increment of one mole of carbon dioxide when its absolute temperature increases n = 2.0 times if the process of heating is (a) isochoric; (b) isobaric. The gas is to be regarded as ideal.
Solution. (a) In an isochoric process ΔS = ∫TiTf CVdT/T = CV ln(Tf/Ti) = CV ln n = R ln n/(γ − 1). For carbon dioxide γ = 1.30, so ΔS = 19.2 J/(K·mol).
(b) For an isobaric process ΔS = Cp ln(Tf/Ti) = Cp ln n = γR ln n/(γ − 1) = 25 J/(K·mol).
Teacher's Note: Entropy change at constant V uses C_V, at constant p uses C_p; both give ln n times heat capacity.
Exam Note: Use γ = 1.30 for CO₂; units J/K per mole.
Question 131. The entropy of ν = 4.0 moles of an ideal gas increases by ΔS = 23 J/K due to the isothermal expansion. How many times should the volume of the gas be increased?
Solution. In an isothermal expansion ΔS = νR ln(Vf/Vi), so Vf/Vi = eΔS/νR = e23/(4.0 × 8.31) = 2.0 times.
Teacher's Note: Isothermal ΔS = νR ln(V2/V1); invert the logarithm with an exponential.
Exam Note: Compute the exponent first: ΔS/νR ≈ 0.69.
Question 132. Two moles of an ideal gas are cooled isochorically and then expanded isobarically to lower the gas temperature back to the initial value. Find the entropy increment of the gas if in this process the gas pressure changed n = 3.3 times.
Solution. The entropy change depends on the final and initial states only, so we can calculate it directly along the isotherm connecting them: ΔS = 2R ln n = 2 × 8.31 × ln 3.3 = 20 J/K (assuming that the final volume is n times the initial volume; the final pressure is 1/n of the initial one).
Teacher's Note: Entropy is a state function; replace the two-step path by the isotherm between end states.
Exam Note: Quote that ΔS is path independent.
Question 133. Helium of mass m = 1.7 g is expanded adiabatically n = 3.0 times and then compressed isobarically down to the initial volume. Find the entropy increment of the gas in this process.
Solution. Let the initial temperature be T0 and the volume V0. In the adiabatic expansion TVγ−1 = T0V0γ−1, so T1 = T0n1−γ, where n = V1/V0 and V1 is the volume at the end of the adiabatic process. There is no entropy change in this process. Next the gas is compressed isobarically, and the net entropy change is ΔS = (m/M)Cp ln(Tf/T1).
But V1/T1 = V0/Tf, i.e. Tf = T1V0/V1 = T0n−γ. So
ΔS = (m/M)Cp ln(1/n) = −(m/M)Cp ln n = −(m/M)[γR/(γ − 1)] ln n = −9.7 J/K (He: γ = 5/3, M = 4 g/mol).
Teacher's Note: Adiabatic reversible step has ΔS = 0; only the isobaric compression contributes, so ΔS is negative.
Exam Note: State sign: entropy decreases; use γ = 5/3 for helium.
Part 2
Question 134. Find the entropy increment of ν = 2.0 moles of an ideal gas whose adiabatic exponent γ = 1.30 if, as a result of a certain process, the gas volume increased α = 2.0 times while the pressure dropped β = 3.0 times.
Solution. The entropy change depends on the initial and final states only, so it can be calculated for any process whatsoever. We choose to evaluate it along the pair of lines: an isochoric fall of pressure from (p0, V0, T0) to (p0/β, V0, T0/β), followed by an isobaric expansion to (p0/β, αV0, αT0/β). Then
ΔS = ∫T0T0/β νCVdT/T + ∫T0/βαT0/β νCpdT/T = ν(−CV ln β + Cp ln α)
= [νR/(γ − 1)](γ ln α − ln β) ≈ −11 J/K.
Teacher's Note: Pick a convenient reversible path (isochoric then isobaric); entropy depends only on end states.
Exam Note: Show both integrals, then combine into one expression.
Question 135. Vessels 1 and 2 contain ν = 1.2 moles of gaseous helium. The ratio of the vessels' volumes V2/V1 = α = 2.0, and the ratio of the absolute temperatures of helium in them T1/T2 = β = 1.5. Assuming the gas to be ideal, find the difference of gas entropies in these vessels, S2 − S1.
Solution. To calculate the required entropy difference we only have to calculate it for a process in which the state of the gas in vessel 1, (p1, V1, T1), is changed to that in vessel 2, (p2, αV1, T1/β). Take an isochoric change from T1 to T1/(αβ), then an isobaric change to T1/β (volume rises α-fold):
ΔS = ν[∫T1T1/(αβ) CVdT/T + ∫T1/(αβ)T1/β CpdT/T] = ν(Cp ln α − CV ln αβ)
= ν(R ln α − [R/(γ − 1)] ln β) = νR[ln α − ln β/(γ − 1)].
With γ = 5/3, α = 2, β = 1.5, ν = 1.2 this gives S2 − S1 = 0.85 J/K.
Teacher's Note: Entropy is a state function: compute via any reversible path, here isochoric plus isobaric.
Exam Note: Use γ = 5/3 for helium; final value 0.85 J/K.
Question 136. One mole of an ideal gas with the adiabatic exponent γ goes through a polytropic process as a result of which the absolute temperature of the gas increases τ-fold. The polytropic constant equals n. Find the entropy increment of the gas in this process.
Solution. For the polytropic process with index n, pVn = constant, the heat capacity is C = R[1/(γ − 1) − 1/(n − 1)] = [(n − γ)/((γ − 1)(n − 1))]R. So
ΔS = ∫T0τT0 C dT/T = [(n − γ)/((γ − 1)(n − 1))] R ln τ.
Teacher's Note: Polytropic heat capacity is constant, so ΔS = C ln τ; get C from the first law.
Exam Note: Write C first, then ΔS = C ln τ.
Question 137. The expansion process of ν = 2.0 moles of argon proceeds so that the gas pressure increases in direct proportion to its volume. Find the entropy increment of the gas in this process provided its volume increases α = 2.0 times.
Solution. The process may be written as p/p0 = kV/V0, i.e. p ∝ V (k is a constant; p0 and V0 are reference values). The heat capacity along p ∝ V is C = CV + R/2 = R[1/(γ − 1) + 1/2] = ½R(γ + 1)/(γ − 1).
Along the line, when the volume increases α times so does the pressure, so the temperature must increase α2 times. Thus
ΔS = ∫T0α²T0 νC dT/T = (νR/2)[(γ + 1)/(γ − 1)] ln α2 = νR[(γ + 1)/(γ − 1)] ln α.
For ν = 2, γ = 5/3 (argon), α = 2: ΔS = 46.1 J/K.
Teacher's Note: For p ∝ V, T scales as V²; heat capacity is C_V + R/2.
Exam Note: Argon is monatomic: γ = 5/3.
Question 138. An ideal gas with the adiabatic exponent γ goes through a process p = p0 − αV, where p0 and α are positive constants, and V is the volume. At what volume will the gas entropy have the maximum value?
Solution. Let (p1, V1) be a reference point on the line p = p0 − αV, and let (p, V) be any other point on it. Going from (p1, V1) isochorically to pressure p and then isobarically to volume V, the entropy difference is
ΔS = S(p, V) − S(p1, V1) = CV ln(p/p1) + Cp ln(V/V1) = CV ln[(p0 − αV)/p1] + Cp ln(V/V1).
For an extremum, ∂ΔS/∂V = −αCV/(p0 − αV) + Cp/V = 0, or Cp(p0 − αV) − αVCV = 0, i.e. γ(p0 − αV) − αV = 0, so
Vm = γp0/[α(γ + 1)].
This is a maximum because ∂2ΔS/∂V2 < 0. (A maximum of ΔS is a maximum of S(p, V).)
Teacher's Note: Set dS/dV = 0 along the line, using C_p/C_V = γ; the second derivative confirms a maximum.
Exam Note: Show the second-derivative check.
Question 139. One mole of an ideal gas goes through a process in which the entropy of the gas changes with temperature T as S = aT + CV ln T, where a is a positive constant, CV is the molar heat capacity of this gas at constant volume. Find the volume dependence of the gas temperature in this process if T = T0 at V = V0.
Solution. Along the process line S = aT + CV ln T, so the heat capacity is C = T dS/dT = aT + CV.
On the other hand dQ = C dT = CVdT + p dV for an ideal gas. Thus p dV = (RT/V)dV = aT dT, or R dV/(aV) = dT, i.e. (R/a) ln V + constant = T. Using T = T0 when V = V0, we get
T = T0 + (R/a) ln(V/V0).
Teacher's Note: Get C = T dS/dT, equate with C_V + p dV/dT, and integrate in V.
Exam Note: Apply the initial condition to fix the constant.
Question 140. Find the entropy increment of one mole of a Van der Waals gas due to the isothermal variation of volume from V1 to V2. The Van der Waals corrections are assumed to be known.
Solution. For a Van der Waals gas (p + a/V2)(V − b) = RT. The entropy change along an isotherm can be calculated from ΔS = ∫V1V2 (∂S/∂V)T dV. It follows from (Q.129) that (∂S/∂V)T = (∂p/∂T)V = R/(V − b). Assuming a, b to be known constants,
ΔS = R ln[(V2 − b)/(V1 − b)].
Teacher's Note: Use the Maxwell-type relation (∂S/∂V)_T = (∂p/∂T)_V, then p from the van der Waals equation.
Exam Note: Note the constant a drops out.
Question 141. One mole of a Van der Waals gas which had initially the volume V1 and the temperature T1 was transferred to the state with the volume V2 and the temperature T2. Find the corresponding entropy increment of the gas, assuming its molar heat capacity CV to be known.
Solution. We use ΔS = ∫ dS(V, T) = ∫T1T2 (∂S/∂T)V1 dT + ∫V1V2 (∂S/∂V)T=T2 dV
= ∫T1T2 CVdT/T + ∫V1V2 R dV/(V − b).
Assuming CV, a, b to be known constants,
ΔS = CV ln(T2/T1) + R ln[(V2 − b)/(V1 − b)].
Teacher's Note: Split into an isochoric temperature step and an isothermal volume step; entropy is path independent.
Exam Note: Treat C_V as constant.
Question 142. At very low temperatures the heat capacity of crystals is equal to C = aT3, where a is a constant. Find the entropy of a crystal as a function of temperature in this temperature interval.
Solution. We can take S → 0 as T → 0. Then S = ∫0T C dT/T = ∫0T aT2dT = ⅓aT3.
Teacher's Note: Divide C by T, integrate from absolute zero where S → 0 (third law).
Exam Note: Cite S(0) = 0 as the boundary condition.
Question 143. Find the entropy increment of an aluminum bar of mass m = 3.0 kg on its heating from the temperature T1 = 300 K up to T2 = 600 K if in this temperature interval the specific heat capacity of aluminum varies as c = a + bT, where a = 0.77 J/(g·K), b = 0.46 mJ/(g·K2).
Solution. ΔS = ∫T1T2 C dT/T = ∫T1T2 m(a + bT)dT/T = mb(T2 − T1) + ma ln(T2/T1).
Numerically (m = 3000 g): 3000 × 0.46×10−3 × 300 + 3000 × 0.77 × ln 2 = 414 + 1601 ≈ 2.0 kJ/K.
Teacher's Note: Integrate m·c(T)/T over T; the bT term gives a linear piece, the a term gives a logarithm.
Exam Note: Convert mass to grams to match a and b.
Question 144. In some process the temperature of a substance depends on its entropy S as T = aSn, where a and n are constants. Find the corresponding heat capacity C of the substance as a function of S. At what condition is C < 0?
Solution. Here T = aSn, or S = (T/a)1/n. Then C = T dS/dT = T·(1/n)·T1/n − 1/a1/n = S/n. Clearly C < 0 if n < 0 (for S > 0).
Teacher's Note: Use C = T dS/dT; T times dS/dT collapses to S/n.
Exam Note: Give both C = S/n and the sign condition.
Question 145. Find the temperature T as a function of the entropy S of a substance for a polytropic process in which the heat capacity of the substance equals C. The entropy of the substance is known to be equal to S0 at the temperature T0. Draw the approximate plots T(S) for C > 0 and C < 0.
Solution. We know S − S0 = ∫T0T C dT/T = C ln(T/T0), assuming C to be a known constant. Then
T = T0 exp[(S − S0)/C].
For C > 0 the temperature rises exponentially with S; for C < 0 it falls exponentially with S (both curves start at (S0, T0)); see the plots.
Teacher's Note: A constant C makes T exponential in S; sign of C decides rising or falling curve.
Exam Note: Sketch both curves from (S0, T0).
Question 146. One mole of an ideal gas with heat capacity CV goes through a process in which its entropy S depends on T as S = α/T, where α is a constant. The gas temperature varies from T1 to T2. Find: (a) the molar heat capacity of the gas as a function of its temperature; (b) the amount of heat transferred to the gas; (c) the work performed by the gas.
Solution. (a) C = T dS/dT = −α/T.
(b) Q = ∫T1T2 C dT = α ln(T1/T2).
(c) W = Q − ΔU = α ln(T1/T2) + CV(T1 − T2), since for an ideal gas CV is constant and ΔU = CV(T2 − T1) (U does not depend on V).
Teacher's Note: C = T dS/dT gives −α/T; heat is its integral; work follows from the first law.
Exam Note: Use ΔU = C_V ΔT for ideal gas.
Question 147. A working substance goes through a cycle within which the absolute temperature varies n-fold, and the shape of the cycle is shown in (a) Fig. 2.4a; (b) Fig. 2.4b, where T is the absolute temperature and S the entropy. Find the efficiency of each cycle.
Solution. (Fig. 2.4: both cycles are triangles on the T–S diagram. In (a): from (S0, T0) horizontally to (S1, T0), vertically down to (S1, T1), then along a straight line back to (S0, T0). In (b): from (S0, T0) along a straight line down to (S1, T1), horizontally back to (S0, T1), then vertically up to (S0, T0). Here T1 = T0/n.)
From the definition, Q = ∫T dS = area under the curve.
(a) Q1 = T0(S1 − S0), Q2′ = ½(T0 + T1)(S1 − S0). Thus, using T1 = T0/n,
η = 1 − (T0 + T1)/(2T0) = 1 − (1 + 1/n)/2 = (n − 1)/(2n).
(b) Q1 = ½(S1 − S0)(T1 + T0), Q2′ = T1(S1 − S0), so
η = 1 − 2T1/(T1 + T0) = (T0 − T1)/(T0 + T1) = (n − 1)/(n + 1).
Teacher's Note: On a T–S diagram heat equals area under the curve; work equals area enclosed.
Exam Note: Identify heat in and heat out as areas.
Question 148. One of the two thermally insulated vessels interconnected by a tube with a valve contains ν = 2.2 moles of an ideal gas. The other vessel is evacuated. The valve having been opened, the gas increased its volume n = 3.0 times. Find the entropy increment of the gas.
Solution. In this case, called free expansion, no work is done and no heat is exchanged, so the internal energy must remain unchanged, Uf = Ui. For an ideal gas this implies constant temperature, Tf = Ti. The process is irreversible, but the entropy change can be calculated by considering a reversible isothermal process between the same states:
ΔS = ∫dQ/T = ∫V1V2 p dV/T = νR ln n = 20.1 J/K.
Teacher's Note: Free expansion is irreversible; compute ΔS along a reversible isothermal path with the same end states.
Exam Note: Say why the isothermal path is allowed.
Question 149. A weightless piston divides a thermally insulated cylinder into two equal parts. One part contains one mole of an ideal gas with adiabatic exponent γ, the other is evacuated. The initial gas temperature is T0. The piston is released and the gas fills the whole volume of the cylinder. Then the piston is slowly displaced back to the initial position. Find the increment of the internal energy and the entropy of the gas resulting from these two processes.
Solution. The process consists of two parts. The first part is free expansion, in which Uf = Ui (T unchanged; the volume doubles from V0 to 2V0 and the pressure halves, pf = ½p0). The second part is reversible adiabatic compression from 2V0 back to V0, in which the work done on the gas increases its internal energy. In the second part pVγ = ½p0(2V0)γ = 2γ−1p0V0γ, so the work done on the gas is
−∫2V0V0 p dV = (2γ−1 − 1)RT0/(γ − 1).
Thus ΔU = UF − Ui = [RT0/(γ − 1)](2γ−1 − 1).
The entropy change is ΔS = ΔSI + ΔSII with ΔSI = R ln 2 (free expansion, as in Q.148) and ΔSII = 0 (reversible adiabatic). Thus ΔS = R ln 2.
Teacher's Note: Free expansion: ΔS = R ln 2, ΔU = 0. Slow adiabatic compression: ΔS = 0, ΔU = work done.
Exam Note: Treat the two stages separately, then add.
Question 150. An ideal gas was expanded from the initial state to the volume V without any heat exchange with the surrounding bodies. Will the final gas pressure be the same in the case of (a) a fast and in the case of (b) a very slow expansion process?
Solution. In all adiabatic processes, by the first law, Q = Uf − Ui + A = 0, so Uf = Ui − A. For a slow process A′ = ∫V0V p dV, where for a quasistatic adiabatic process pVγ = constant. For a fast process the external work done is A″ < A′ (in fact A″ = 0 for free expansion). Thus Uf′ (slow) < Uf″ (fast). Since U depends on temperature only, Tf′ < Tf″. Consequently, from pV = RT at the same final volume V, the final pressure is not the same: pf″ > pf′, i.e. it is higher after the fast expansion (a) than after the very slow one (b).
Teacher's Note: Less work done by the gas means less internal energy lost, so higher final T and p.
Exam Note: Argue via first law, then pV = RT.
Question 151. A thermally insulated vessel is partitioned into two parts so that the volume of one part is n = 2.0 times greater than that of the other. The smaller part contains ν1 = 0.30 mole of nitrogen, and the greater one ν2 = 0.70 mole of oxygen. The temperature of the gases is the same. A hole is punctured in the partition and the gases are mixed. Find the corresponding increment of the system's entropy, assuming the gases to be ideal.
Solution. Let V1 = V0, V2 = nV0. Since the temperature is the same, the required entropy change can be calculated by considering isothermal expansion of the gas in either part into the whole vessel:
ΔS = ΔSI + ΔSII = ν1R ln[(V1 + V2)/V1] + ν2R ln[(V1 + V2)/V2]
= ν1R ln(1 + n) + ν2R ln[(1 + n)/n] = 5.1 J/K.
Teacher's Note: Each gas expands isothermally into the full vessel independently; add the two entropy increases.
Exam Note: Different gases: both entropies increase.
Question 152. A piece of copper of mass m1 = 300 g with initial temperature t1 = 97 °C is placed into a calorimeter in which the water of mass m2 = 100 g is at a temperature t2 = 7 °C. Find the entropy increment of the system by the moment the temperatures equalize. The heat capacity of the calorimeter itself is negligibly small.
Solution. Let c1 be the specific heat of copper and c2 that of water. Then ΔS = ∫280 KT0 c2m2dT/T − ∫T0370 K m1c1dT/T = m2c2 ln(T0/280) − m1c1 ln(370/T0).
T0 is found from c2m2(T0 − 280) = m1c1(370 − T0), or T0 = (280m2c2 + 370m1c1)/(c2m2 + m1c1).
Using c1 = 0.39 J/(g·K), c2 = 4.18 J/(g·K): T0 = 299.7 K ≈ 300 K, and ΔS = 28.4 − 24.7 = 3.7 J/K.
Corrected: the book prints 28.4 − 24.5 = 3.9 J/K, which mixes the exact first term (T0 = 299.7 K) with the second term evaluated at T0 = 300 K; with T0 = 299.7 K for both terms ΔS ≈ 3.7 J/K.
Teacher's Note: Find the final temperature from heat balance, then add ΔS of water (positive) and copper (negative).
Exam Note: Use kelvin in the logarithms; net ΔS must be positive.
Question 153. Two identical thermally insulated vessels interconnected by a tube with a valve contain one mole of the same ideal gas each. The gas temperature in one vessel is equal to T1 and in the other, T2. The molar heat capacity of the gas of constant volume equals CV. The valve having been opened, the gas comes to a new equilibrium state. Find the entropy increment ΔS of the gas. Demonstrate that ΔS > 0.
Solution. For an ideal gas the internal energy depends on temperature only. We can consider the process to be one of simultaneous free expansion, so the total energy is conserved: U = U1 + U2, with U1 = CVT1, U2 = CVT2, U = 2CV(T1 + T2)/2, so (T1 + T2)/2 is the final temperature. The entropy change is obtained by considering isochoric processes, because in effect each portion of gas (one mole in each vessel's volume) is simply brought to the final temperature:
ΔS = ∫T1(T1+T2)/2 CVdT/T + ∫T2(T1+T2)/2 CVdT/T = CV ln[(T1 + T2)2/(4T1T2)].
Since (T1 + T2)2 = (T1 − T2)2 + 4T1T2 ≥ 4T1T2, the argument of the logarithm exceeds 1 (for T1 ≠ T2) and hence ΔS > 0.
Teacher's Note: Equal masses, same gas: final T is the arithmetic mean; entropy sums the two isochoric heatings/coolings.
Exam Note: Use (a+b)² = (a−b)² + 4ab to prove ΔS > 0.
Question 154. N atoms of gaseous helium are enclosed in a cubic vessel of volume 1.0 cm3 at room temperature. Find: (a) the probability of atoms gathering in one half of the vessel; (b) the approximate numerical value of N ensuring the occurrence of this event within the time interval t ≈ 1010 years (the age of the Universe).
Solution. (a) Each atom has a probability 1/2 of being in either compartment. Thus p = 2−N.
(b) The typical atomic velocity at room temperature is ~105 cm/s, so it takes an atom about 10−5 s to cross the vessel. This is the relevant time scale τ for our problem. In time t there will be t/τ rearrangements of the atoms. This will be large enough to produce the given arrangement if (t/τ)·2−N ~ 1, or N ~ ln(t/τ)/ln 2 ≈ 75.
Teacher's Note: Waiting time ≈ τ·2^N; set it equal to the age of the Universe and solve for N.
Exam Note: State τ ≈ 10⁻⁵ s clearly.
Question 155. Find the statistical weight of the most probable distribution of N = 10 identical molecules over two halves of the cylinder's volume. Find also the probability of such a distribution.
Solution. The statistical weight is C(N, N/2) = N!/[(N/2)!(N/2)!] = (10 × 9 × 8 × 7 × 6)/(5 × 4 × 3 × 2) = 252.
The probability of such a distribution is 252 × 2−10 = 24.6%.
Teacher's Note: Most probable split is 5+5; weight is the binomial coefficient, probability divides by 2^N.
Exam Note: Show the binomial coefficient and divide by 2¹⁰.
Question 156. A vessel contains N molecules of an ideal gas. Dividing mentally the vessel into two halves A and B, find the probability that the half A contains n molecules. Consider the cases when N = 5 and n = 0, 1, 2, 3, 4, 5.
Solution. The probability that half A contains n molecules is Pn = C(N, n)·2−N = N!/[n!(N − n)!] · 2−N.
For N = 5 (values computed from this formula): P0 = 1/32 ≈ 0.031, P1 = 5/32 ≈ 0.156, P2 = 10/32 ≈ 0.313, P3 = 10/32 ≈ 0.313, P4 = 5/32 ≈ 0.156, P5 = 1/32 ≈ 0.031.
Teacher's Note: Each molecule is in A with probability 1/2; count the ways to pick n of N molecules.
Exam Note: Give the formula and the six numerical values.
Question 157. A vessel of volume V0 contains N molecules of an ideal gas. Find the probability of n molecules getting into a certain separated part of the vessel of volume V. Examine, in particular, the case V = V0/2.
Solution. The probability of one molecule being confined to the marked volume is p = V/V0. We can choose these n molecules in C(N, n) ways. The probability that n molecules get confined to the marked volume is clearly
Pn = C(N, n) pn(1 − p)N−n = N!/[n!(N − n)!] · pn(1 − p)N−n.
For V = V0/2, p = 1/2 and Pn = N!/[n!(N − n)!] · 2−N, as in Q.156.
Teacher's Note: This is the binomial distribution with success probability p = V/V0.
Exam Note: Quote the general formula, then set p = 1/2.
Question 158. An ideal gas is under standard conditions. Find the diameter of the sphere within whose volume the relative fluctuation of the number of molecules is equal to η = 1.0·10−3. What is the average number of molecules inside such a sphere?
Solution. In a sphere of diameter d there are N = (πd3/6)n0 molecules, where n0 = Loschmidt's number = number of molecules per unit volume (1 cm3) under normal conditions (2.69 × 1019 cm−3). The relative fluctuation in this number is ΔN/N = √N/N = 1/√N = η, or 1/η2 = (π/6)d3n0, or d3 = 6/(πn0η2), so
d = [6/(πη2n0)]1/3 = 0.41 μm.
The average number of molecules in this sphere is 1/η2 = 106.
Teacher's Note: Fluctuation of N molecules is √N, so relative fluctuation 1/√N sets N = 1/η².
Exam Note: Use Loschmidt number 2.69×10¹⁹ cm⁻³.
Question 159. One mole of an ideal gas consisting of monatomic molecules is enclosed in a vessel at a temperature T0 = 300 K. How many times and in what way will the statistical weight of this system (gas) vary if it is heated isochorically by ΔT = 1.0 K?
Solution. For a monatomic gas CV = (3/2)R per mole. The entropy change in the process is
ΔS = S − S0 = ∫T0T0+ΔT CVdT/T = (3/2)R ln(1 + ΔT/T0).
Now from the Boltzmann equation S = k ln Ω:
Ω/Ω0 = e(S−S0)/k = (1 + ΔT/T0)3NA/2 = (1 + 1/300)(3 × 6.0 × 1023)/2 ≈ 101.3×1021.
Thus the statistical weight increases by this enormous factor, about 101.3×1021 times.
Teacher's Note: Boltzmann: Ω ∝ exp(S/k); a tiny ΔS/k is huge because k is tiny.
Exam Note: Write the factor as 10 to the power 1.3×10²¹.
IE Irodov Solutions for JEE Mathematics: IE Irodov Solutions Chapter 12 The Second Law Of Thermodynamics Entropy
Access JEE Mathematics Solutions
Explore reliable mathematical solutions for IE Irodov Solutions Chapter 12 The Second Law Of Thermodynamics Entropy tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for JEE
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
In addition to these IE Irodov Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.