IE Irodov Solutions Chapter 11 Kinetic Theory Of Gases

IE Irodov Solutions for JEE Physics: Chapter 11 Kinetic Theory Of Gases

Review structured textbook solutions for JEE Physics Chapter 11 Kinetic Theory Of Gases prepared by IE Irodov. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice JEE Physics Solutions: Chapter 11 Kinetic Theory Of Gases

Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Kinetic Theory Of Gases - Problems 62 to 112

Equation Of State, Degrees Of Freedom And Heat Capacity

Question 62. Modern vacuum pumps permit the pressures down to p = 4·10−15 atm to be reached at room temperatures. Assuming that the gas exhausted is nitrogen, find the number of its molecules per 1 cm3 and the mean distance between them at this pressure.

Solution. From p = nkT: n = p/kT = (4 × 10−15 × 1.01 × 105)/(1.38 × 10−23 × 300) per m3 = 1 × 1011 per m3 = 105 per cm3.

Mean distance between molecules = (10−5 cm3)1/3 = 101/3 × 10−2 cm ≈ 0.2 mm.

Teacher's Note: Use p = nkT with p in pascal; mean spacing is the cube root of volume per molecule.

Exam Note: Convert atm to Pa; cube-root step earns marks.

Question 63. A vessel of volume V = 5.0 l contains m = 1.4 g of nitrogen at a temperature T = 1800 K. Find the gas pressure, taking into account that η = 30% of molecules are disassociated into atoms at this temperature.

Solution. After dissociation each N2 molecule becomes two atoms, so the number of moles becomes (m/M)(1 + η) and
p = (mRT/MV)(1 + η).
Here M is the molar mass of N2 (28 g/mol).

Numerically: p = (1.4/28)(8.31)(1800)(1.3)/(5.0 × 10−3) ≈ 1.9 × 105 Pa ≈ 1.9 atm (numerical value added; not printed in the book).

Teacher's Note: Each dissociated molecule gives two particles, so total moles = (m/M)(1+η); then apply pV = nRT.

Exam Note: Show (1+η) factor; convert litres to m³.

Question 64. Under standard conditions the density of the helium and nitrogen mixture equals ρ = 0.60 g/l. Find the concentration of helium atoms in the given mixture.

Solution. Let n1 = number density of the (He) atoms, n2 = number density of N2 molecules. Then the mass density ρ = n1m1 + n2m2, where m1 = mass of the atom, m2 = mass of the N2 molecule; also p = (n1 + n2)kT.
From these two equations we get
n1 = (p/kT − ρ/m2) / (1 − m1/m2).

Numerically (added): n1 ≈ 2.8 × 1019 cm−3.

Teacher's Note: Two equations: total concentration from p = nkT and mass density from sum of n·m; eliminate n₂.

Exam Note: Write both equations first; substitute standard p and T.

Question 65. A parallel beam of nitrogen molecules moving with velocity v = 400 m/s impinges on a wall at an angle θ = 30° to its normal. The concentration of molecules in the beam n = 0.9·1019 cm−3. Find the pressure exerted by the beam on the wall assuming the molecules to scatter in accordance with the perfectly elastic collision law.

Solution.

incidentreflectedθθnormal

Per unit area dA, molecules hitting per second = nv cosθ dA, each transferring momentum 2mv cosθ. So
p = (nv × 2mv cosθ × dA cosθ)/dA = 2mnv2cos2θ.

Numerically (added): p = 2(4.65 × 10−26)(0.9 × 1025)(400)2(0.75) ≈ 1.0 × 105 Pa.

Teacher's Note: Momentum change per hit is 2mv cosθ; hit rate per area is nv cosθ, giving a cos²θ dependence.

Exam Note: Remember both cosθ factors; convert cm⁻³ to m⁻³.

Question 66. How many degrees of freedom have the gas molecules, if under standard conditions the gas density is ρ = 1.3 mg/cm3 and the velocity of sound propagation in it is v = 330 m/s.

Solution. From the formula v = √(γp/ρ), γ = ρv2/p. If i = number of degrees of freedom of the gas then CV = (i/2)R, Cp = CV + R, so γ = Cp/CV = 1 + 2/i, or
i = 2/(γ − 1) = 2/(ρv2/p − 1).

Numerically (added): ρv2/p = 1.3 × 3302/1.013 × 105 = 1.40, so i ≈ 5.

Teacher's Note: Sound speed gives γ = ρv²/p; then γ = 1 + 2/i fixes degrees of freedom.

Exam Note: Use γ = 1+2/i; answer i = 5 (diatomic).

Question 67. Determine the ratio of the sonic velocity v in a gas to the root mean square velocity of molecules of this gas, if the molecules are (a) monatomic; (b) rigid diatomic.

Solution. vsound = √(γp/ρ) = √(γRT/M) and vrms = √(3kT/m) = √(3RT/M), so
vsound/vrms = √(γ/3) = √((i + 2)/(3i)).

(a) For monatomic gases i = 3: vsound/vrms = √(5/9) = 0.75.

(b) For rigid diatomic molecules i = 5: vsound/vrms = √(7/15) = 0.68.

Teacher's Note: Ratio reduces to √(γ/3); γ = (i+2)/i for each molecule type.

Exam Note: State γ values 5/3 and 7/5 before substituting.

Question 68. A gas consisting of N-atomic molecules has the temperature T at which all degrees of freedom (translational, rotational, and vibrational) are excited. Find the mean energy of molecules in such a gas. What fraction of this energy corresponds to that of translational motion?

Solution. For a general non-collinear, non-planar molecule, mean energy = (3/2)kT (translational) + (3/2)kT (rotational) + (3N − 6)kT (vibrational) = (3N − 3)kT per molecule.

For linear molecules, mean energy = (3/2)kT (translational) + kT (rotational) + (3N − 5)kT (vibrational) = (3N − 5/2)kT per molecule.

Translational energy is a fraction 1/(2(N − 1)) and 1/(2N − 5/3) in the two cases.

Teacher's Note: Each vibrational mode carries kT (kinetic plus potential); count 3N−6 modes (non-linear) or 3N−5 (linear).

Exam Note: Count modes correctly; vibration counts kT, not ½kT.

Question 69. Suppose a gas is heated up to a temperature at which all degrees of freedom (translational, rotational, and vibrational) of its molecules are excited. Find the molar heat capacity of such a gas in the isochoric process, as well as the adiabatic exponent γ, if the gas consists of (a) diatomic; (b) linear N-atomic; (c) network N-atomic molecules.

Solution. (a) A diatomic molecule has 3 translational, 2 rotational and one vibrational degree of freedom. The corresponding energy per mole is (3/2)RT (translational) + 2 × (1/2)RT (rotational) + 1 × RT (vibrational) = (7/2)RT. Thus CV = (7/2)R and γ = Cp/CV = 9/7.

(b) For linear N-atomic molecules energy per mole = (3N − 5/2)RT as before. So CV = (3N − 5/2)R and γ = (6N − 3)/(6N − 5).

(c) For non-collinear N-atomic molecules CV = 3(N − 1)R as before (2.68) and γ = (3N − 2)/(3N − 3) = (N − 2/3)/(N − 1).

Teacher's Note: C_V is the energy per mole differentiated by T; vibrations add R each; γ = 1 + R/C_V.

Exam Note: Count 3 trans + 2 rot + 1 vib; answers 7R/2, 9/7.

Question 70. An ideal gas consisting of N-atomic molecules is expanded isobarically. Assuming that all degrees of freedom (translational, rotational, and vibrational) of the molecules are excited, find what fraction of heat transferred to the gas in this process is spent to perform the work of expansion. How high is this fraction in the case of a monatomic gas?

Solution. In the isobaric process, work done is A = p dV = R dT per mole. On the other hand heat transferred Q = Cp dT. Now Cp = (3N − 2)R for non-collinear molecules and Cp = (3N − 3/2)R for linear molecules. Thus
A/Q = 1/(3N − 2) (non-collinear); A/Q = 1/(3N − 3/2) (linear).
For monatomic gases Cp = (5/2)R and A/Q = 2/5.

Teacher's Note: Isobaric work per mole is R dT and heat is C_p dT, so A/Q = R/C_p.

Exam Note: Use C_p = C_V + R from previous problem.

Question 71. Find the molar mass and the number of degrees of freedom of molecules in a gas if its heat capacities are known: cV = 0.65 J/(g·K) and cp = 0.91 J/(g·K).

Solution. Given specific heats cp, cV (per unit mass): M(cp − cV) = R, or M = R/(cp − cV).
Also γ = cp/cV = 2/i + 1, so i = 2/(cp/cV − 1) = 2cV/(cp − cV).

Numerically (added): M = 8.31/0.26 ≈ 32 g/mol (oxygen) and i = 2(0.65)/0.26 = 5.

Teacher's Note: Mayer relation per unit mass: M(c_p − c_V) = R; degrees of freedom from γ.

Exam Note: Use per-gram heats; units g/mol with R=8.31.

Question 72. Find the number of degrees of freedom of molecules in a gas whose molar heat capacity (a) at constant pressure is equal to Cp = 29 J/(mol·K); (b) is equal to C = 29 J/(mol·K) in the process pT = const.

Solution. (a) Cp = 29 J/(K·mol) = (29/8.3)R, CV = (20.7/8.3)R, γ = 29/20.7 = 1.4 = 7/5, so i = 5.

(b) In the process pT = const, with pV = RT we get T2/V = const, so 2 dT/T − dV/V = 0. Thus C dT = CV dT + p dV = CV dT + (RT/V) dV = CV dT + 2R dT, or C = CV + 2R = (29/8.3)R, so CV = (12.4/8.3)R = (3/2)R. Hence i = 3 (monatomic).

Teacher's Note: For process pT=const, pV=RT gives V∝T²; then C = C_V + p dV/dT = C_V + 2R.

Exam Note: Derive C = C_V + 2R; answers i = 5 and 3.

Question 73. Find the adiabatic exponent γ for a mixture consisting of ν1 moles of a monatomic gas and ν2 moles of gas of rigid diatomic molecules.

Solution. Obviously CV/R = (3/2)ν1 + (5/2)ν2 (total heat capacity of the mixture at constant volume, since a monatomic gas has CV = (3/2)R per mole and a diatomic gas has CV = (5/2)R. The diatomic molecule is rigid so no vibration).
Cp/R = (3/2)ν1 + (5/2)ν2 + ν1 + ν2.
Hence γ = Cp/CV = (5ν1 + 7ν2)/(3ν1 + 5ν2).

Teacher's Note: Heat capacities of components add; C_p = C_V + (ν₁+ν₂)R for the mixture.

Exam Note: Add heat capacities, not γ values.

Question 74. A thermally insulated vessel with gaseous nitrogen at a temperature t = 27°C moves with velocity v = 100 m/s. How much (in per cent) and in what way will the gas pressure change on a sudden stoppage of the vessel?

Solution. The internal energy of the molecules is U = (1/2)mN⟨(u − v)2⟩ = (1/2)mN⟨u2 − v2⟩, where v = velocity of the vessel, N = number of molecules, each of mass m. When the vessel is stopped, internal energy becomes (1/2)mN⟨u2⟩. So there is an increase in internal energy of ΔU = (1/2)mNv2. This will give rise to a rise in temperature of
ΔT = ((1/2)mNv2)/((i/2)R) = mNv2/(iR) (per mole basis).
There being no flow of heat, this change of temperature will lead to an excess pressure
Δp = RΔT/V = mNv2/(iV).
And finally Δp/p = Mv2/(iRT) = 2.2 % (an increase).
Where M = molar mass of N2, i = number of degrees of freedom of N2.

Teacher's Note: Kinetic energy of bulk motion converts to internal energy on stopping; pressure rises at constant volume.

Exam Note: Pressure increases by ~2.2%; state i = 5.

Question 75. Calculate at the temperature t = 17°C: (a) the root mean square velocity and the mean kinetic energy of an oxygen molecule in the process of translational motion; (b) the root mean square velocity of a water droplet of diameter d = 0.10 μm suspended in the air.

Solution. (a) From the equipartition theorem ε̄ = (3/2)kT = 6 × 10−21 J, and vrms = √(3kT/m) = √(3RT/M) = 0.47 km/s.

(b) In equilibrium the mean kinetic energy of the droplet will be equal to that of a molecule: (1/2)(π/6)d3ρ vrms2 = (3/2)kT, or vrms = 3√(2kT/(πd3ρ)) = 0.15 m/s.

Teacher's Note: Equipartition: every particle has ⟨KE⟩ = 3kT/2, so heavier droplet moves far slower.

Exam Note: Use droplet mass (π/6)d³ρ with ρ = 1000 kg/m³.

Question 76. A gas consisting of rigid diatomic molecules is expanded adiabatically. How many times has the gas to be expanded to reduce the root mean square velocity of the molecules η = 1.50 times?

Solution. Here i = 5, CV = (5/2)R, γ = 7/5 given. v′rms = √(3RT′/M) = (1/η)vrms = (1/η)√(3RT/M), or T′ = T/η2.
TVγ−1 = TV2/i = constant, or VTi/2 = constant.
V′(T/η2)i/2 = VTi/2, or V′η−i = V, or V′ = ηiV.
The gas must be expanded ηi times, i.e. 7.6 times.

Teacher's Note: v_rms ∝ √T, so T falls by η²; adiabatic law VT^{i/2}=const gives V ratio η^i.

Exam Note: Link v_rms to T first; 1.5⁵ ≈ 7.6.

Question 77. The mass m = 15 g of nitrogen is enclosed in a vessel at a temperature T = 300 K. What amount of heat has to be transferred to the gas to increase the root mean square velocity of its molecules η = 2.0 times?

Solution. Here CV = (5/2)(m/M)R (i = 5 here), m = mass of the gas, M = molar mass. If vrms increases η times, the temperature will have increased η2 times. This will require (neglecting expansion of the vessel) a heat flow of amount
Q = (5/2)(m/M)R(η2 − 1)T = 10 kJ.

Teacher's Note: Constant volume: Q = (m/M)C_V ΔT with T rising by factor η².

Exam Note: Use ΔT = (η²−1)T; 10 kJ.

Question 78. The temperature of a gas consisting of rigid diatomic molecules is T = 300 K. Calculate the angular root mean square velocity of a rotating molecule if its moment of inertia is equal to I = 2.1·10−39 g·cm2.

Solution. The root mean square angular velocity is given by (1/2)Iω2 = 2 × (1/2)kT (2 degrees of rotation), or ω = √(2kT/I) = 6.3 × 1012 rad/s.

Teacher's Note: Two rotational degrees of freedom each carry kT/2, so ½Iω² = kT.

Exam Note: Convert I to SI: 2.1×10⁻⁴⁶ kg·m².

Question 79. A gas consisting of rigid diatomic molecules was initially under standard conditions. Then the gas was compressed adiabatically η = 5.0 times. Find the mean kinetic energy of a rotating molecule in the final state.

Solution. Under compression, the temperature will rise. TVγ−1 = constant, TV2/i = constant, or T′(η−1V0)2/i = T0V02/i, or T′ = η2/iT0.

The mean rotational kinetic energy of a molecule is kT′ = kT0η2/5 ≈ 7.2 × 10−21 J (T0 = 273 K, T′ ≈ 520 K). (Final step added; the printed text stops at T′.)

Teacher's Note: Adiabatic compression raises T by η^{2/i}; rotation has two degrees, so energy is kT′.

Exam Note: Final answer needs kT′, not (3/2)kT′.

Question 80. How will the rate of collisions of rigid diatomic molecules against the vessel's wall change, if the gas is expanded adiabatically η times?

Solution. Number of collisions per unit area per second ν = (1/4)n⟨v⟩. Now ν′/ν = (n′⟨v′⟩)/(n⟨v⟩) = (1/η)√(T′/T) (when the gas is expanded η times, n decreases by a factor η). Also T′(ηV)2/i = TV2/i, or T′ = η−2/iT, so ν′/ν = (1/η)η−1/i = η−(i+1)/i, i.e. collisions decrease by a factor η(i+1)/i, i = 5 here.

Teacher's Note: Collision rate ∝ n⟨v⟩; n falls by η and ⟨v⟩ falls as √T with T ∝ η^{−2/i}.

Exam Note: Combine density and speed factors; exponent 6/5.

Question 81. The volume of gas consisting of rigid diatomic molecules was increased η = 2.0 times in a polytropic process with the molar heat capacity C = R. How many times will the rate of collisions of molecules against a vessel's wall be reduced as a result of this process?

Solution. In a polytropic process pVn = constant, where n is called the polytropic index. For this process pVn = constant, or TVn−1 = constant, so dT/T + (n − 1)dV/V = 0.
Then dQ = C dT = dU + p dV = CV dT + p dV = (i/2)R dT + (RT/V)dV = (i/2)R dT − (1/(n − 1))R dT = (i/2 − 1/(n − 1))R dT.
Now C = R so i/2 − 1/(n − 1) = 1, or 1/(n − 1) = i/2 − 1 = (i − 2)/2, or n = i/(i − 2).
Now ν′/ν = (n′⟨v′⟩)/(n⟨v⟩) = (1/η)√(T′/T) = (1/η)(V/V′)(n−1)/2 = (1/η)(1/η)1/(i−2) = (1/η)(i−1)/(i−2) = η−(i−1)/(i−2) times = 1/2.52 times.

Teacher's Note: Find polytropic index from C = R (n = 5/3), then rate ∝ n⟨v⟩ ∝ V⁻¹T^{1/2}.

Exam Note: Derive n = i/(i−2); 2^{4/3} ≈ 2.52.

Question 82. A gas consisting of rigid diatomic molecules was expanded in a polytropic process so that the rate of collisions of the molecules against the vessel's wall did not change. Find the molar heat capacity of the gas in this process.

Solution. If α is the polytropic index then pVα = constant, TVα−1 = constant. Now ν′/ν = (n′⟨v′⟩)/(n⟨v⟩) = (V/V′)√(T′/T) = (VT−1/2)/(V′T′−1/2) = 1. Hence 1/(α − 1) = −1/2, or α = −1. Then C = iR/2 + R/2 = 3R.

Teacher's Note: Constant collision rate means VT^{−1/2}=const; match with TV^{α−1}=const to get α = −1.

Exam Note: Link α to C = C_V − R/(α−1); answer 3R.

The Maxwell Distribution

Question 83. Calculate the most probable, the mean, and the root mean square velocities of a molecule of a gas whose density under standard atmospheric pressure is equal to ρ = 1.00 g/l.

Solution. vp = √(2kT/m) = √(2RT/M) = √(2p/ρ) = 0.45 km/s,
vav = √(8p/(πρ)) = 0.51 km/s and vrms = √(3p/ρ) = 0.55 km/s.

Teacher's Note: Express all three speeds through p/ρ = RT/M, with factors √2, √(8/π), √3.

Exam Note: Ordering v_p < v_av < v_rms; use ρ = 1 kg/m³.

Question 84. Find the fraction of gas molecules whose velocities differ by less than δη = 1.00% from the value of (a) the most probable velocity; (b) the root mean square velocity.

Solution. (a) The formula is df(u) = (4/√π)u2e−u2du, where u = v/vp. Now Prob(|v − vp|/vp < δη) = ∫1−δη1+δη df(u) = (4/√π)e−1 × 2δη = (8/(√π e))δη = 0.0166.

(b) Prob(|v − vrms|/vrms < δη) = Prob(|v/vp − vrms/vp| < δη vrms/vp) = Prob(|u − √(3/2)| < √(3/2) δη) = ∫√(3/2) − √(3/2)δη√(3/2) + √(3/2)δη (4/√π)u2e−u2du = (4/√π)(3/2)e−3/2 × 2√(3/2) δη = (12√3/√(2π))e−3/2δη = 0.0185.

Teacher's Note: Narrow window: fraction ≈ f(u)·width, evaluated at u = 1 (v_p) or u = √(3/2) (v_rms).

Exam Note: Use small-interval approximation, not full integral.

Question 85. Determine the gas temperature at which (a) the root mean square velocity of hydrogen molecules exceeds their most probable velocity by Δv = 400 m/s; (b) the velocity distribution function F(v) for the oxygen molecules will have the maximum value at the velocity v = 420 m/s.

Solution. (a) vrms − vp = (√3 − √2)√(kT/m) = Δv, so T = (m/k)(Δv/(√3 − √2))2 = 384 K.

(b) √(2kT/m) = v, or T = mv2/2k = 342 K (≈ 340 K with M = 32 g/mol).

Teacher's Note: Express speeds as multiples of √(kT/m): √3 and √2; maximum of F(v) is at v_p.

Exam Note: (b) uses v = v_p; take m as O₂ molecule.

Question 86. In the case of gaseous nitrogen find: (a) the temperature at which the velocities of the molecules v1 = 300 m/s and v2 = 600 m/s are associated with equal values of the Maxwell distribution function F(v); (b) the velocity of the molecules v at which the value of the Maxwell distribution function F(v) for the temperature T0 will be the same as that for the temperature η times higher.

Solution. (a) F(v) = (4/√π)(v2/vp3)e−v2/vp2. Equal values at v1, v2 give v12e−v12/vp2 = v22e−v22/vp2, or (v1/v2)2 = e(v12 − v22)/vp2, or vp2 = 2kT/m = (v12 − v22)/ln(v12/v22). So
T = m(v12 − v22)/(2k ln(v12/v22)) = 330 K.

(b) With vp12 = 2kT0/m and vp22 = ηvp12: (v2/vp13)e−v2/vp12 = (v2/vp23)e−v2/vp22. Thus e−(mv2/2kT0)(1 − 1/η) = 1/η3/2, or (mv2/2kT0)(1 − 1/η) = (3/2)ln η. Thus
v = √(3kT0/m) · √(ln η/(1 − 1/η)).

Teacher's Note: Set the two Maxwell function values equal, take logs, and solve for v_p², then T.

Exam Note: Keep the v³ and v² factors; use m for N₂.

Question 87. At what temperature of a nitrogen and oxygen mixture do the most probable velocities of nitrogen and oxygen molecules differ by Δv = 30 m/s?

Solution. vpN = √(2kT/mN) = √(2RT/MN), vpO = √(2RT/MO).
vpN − vpO = Δv = √(2RT/MN)(1 − √(MN/MO)).
T = MN(Δv)2/(2R(1 − √(MN/MO))2) = mN(Δv)2/(2k(1 − √(mN/mO))2) = 363 K.

Teacher's Note: Lighter N₂ is faster; factor out √(2RT/M_N) and solve for T.

Exam Note: Use molar masses 28 and 32 consistently.

Question 88. The temperature of a hydrogen and helium mixture is T = 300 K. At what value of the molecular velocity v will the Maxwell distribution function F(v) yield the same magnitude for both gases?

Solution. (v2/vpH3)e−v2/vpH2 = (v2/vpHe3)e−v2/vpHe2, or ev2(mHe − mH)/2kT = (mHe/mH)3/2,
v2 = 3kT ln(mHe/mH)/(mHe − mH).
Putting the values we get v = 1.60 km/s.

Teacher's Note: Equate the two Maxwell functions at the same T; mass ratio appears as (m_He/m_H)^{3/2}.

Exam Note: H means H₂ molecules here; check masses used.

Question 89. At what temperature of a gas will the number of molecules, whose velocities fall within the given interval from v to v + dv, be the greatest? The mass of each molecule is equal to m.

Solution. dN(v) = N(4/√π)(v2dv/vp3)e−v2/vp2. For a given range v to v + dv (i.e. given v and dv) this is maximum when
∂/∂vp[dN(v)/(Nv2dv)] = 0 = (−3vp−4 + 2v2/vp6)e−v2/vp2,
or v2 = (3/2)vp2 = 3kT/m. Thus T = mv2/(3k).

Teacher's Note: Differentiate with respect to temperature (via v_p) at fixed v, not with respect to v.

Exam Note: Variable is T here, so differentiate w.r.t. v_p.

Question 90. Find the fraction of molecules whose velocity projections on the x axis fall within the interval from vx to vx + dvx, while the moduli of perpendicular velocity components fall within the interval from v⊥ to v⊥ + dv⊥. The mass of each molecule is m, and the temperature is T.

Solution. The volume element in velocity space is d3v = 2πv⊥dv⊥dvx. Thus the number of such molecules is
dn(v) = N(m/(2πkT))3/2 e−m(vx2 + v⊥2)/2kT dvx 2πv⊥dv⊥, so the fraction is dn/N.

Teacher's Note: Use cylindrical velocity-space element 2πv⊥dv⊥dvx in the 3-D Maxwell distribution.

Exam Note: Fraction = dn/N; include the 2πv⊥ factor.

Question 91. Using the Maxwell distribution function, calculate the mean velocity projection ⟨vx⟩ and the mean value of the modulus of this projection ⟨|vx|⟩ if the mass of each molecule is equal to m and the gas temperature is T.

Solution. ⟨vx⟩ = 0 by symmetry.
⟨|vx|⟩ = ∫−∞∞|vx|e−mvx2/2kTdvx / ∫0∞e−mvx2/2kTdvx = ∫0∞vxe−mvx2/2kTdvx / ∫0∞e−mvx2/2kTdvx = √(2kT/m) ∫0∞ue−u2du / ∫0∞e−u2du = √(2kT/m) Γ(1)/Γ(1/2) = √(2kT/(πm)).

Teacher's Note: The signed average vanishes by symmetry; the modulus average uses half-range integrals with Gamma functions.

Exam Note: Both halves of the integral equal; Γ(1/2)=√π.

Question 92. From the Maxwell distribution function find ⟨vx2⟩, the mean value of the squared vx projection of the molecular velocity in a gas at a temperature T. The mass of each molecule is equal to m.

Solution. ⟨vx2⟩ = ∫0∞vx2e−mvx2/2kTdvx / ∫0∞e−mvx2/2kTdvx = (2kT/m) Γ(3/2)/Γ(1/2) = kT/m.

Teacher's Note: Gaussian second moment: Γ(3/2)/Γ(1/2) = 1/2, giving kT/m; consistent with equipartition.

Exam Note: Check: ½m⟨vx²⟩ = ½kT.

Question 93. Making use of the Maxwell distribution function, calculate the number ν of gas molecules reaching a unit area of a wall per unit time, if the concentration of molecules is equal to n, the temperature to T, and the mass of each molecule is m.

Solution. Here νdA = number of molecules hitting an area dA of the wall per second = ∫0∞dN(vx)vxdA, or
ν = ∫0∞n(m/(2πkT))1/2e−mvx2/2kTvxdvx = ∫0∞(n/√π)(2kT/m)1/2e−u2u du = (1/2)n√(2kT/(πm)) = n√(kT/(2πm)) = (1/4)n⟨v⟩,
where ⟨v⟩ = √(8kT/(πm)).

Teacher's Note: Only molecules moving toward the wall count: integrate v_x f(v_x) over v_x > 0.

Exam Note: Result ν = n⟨v⟩/4 is a standard formula.

Question 94. Using the Maxwell distribution function, determine the pressure exerted by gas on a wall, if the gas temperature is T and the concentration of molecules is n.

Solution. Let dn(vx) = n(m/(2πkT))1/2e−mvx2/2kTdvx be the number of molecules per unit volume with x component of velocity in the range vx to vx + dvx. Then
p = ∫0∞2mvx·vxdn(vx) = ∫0∞2mvx2n(m/(2πkT))1/2e−mvx2/2kTdvx = 2mn(1/√π)(2kT/m)∫0∞u2e−u2du = (4/√π)nkT ∫0∞xe−xdx/(2√x) = nkT.

Teacher's Note: Each hit transfers 2mv_x and hit rate per area is v_x dn; integrating over v_x > 0 gives nkT.

Exam Note: Show 2mv_x momentum and the half-range integral.

Question 95. Making use of the Maxwell distribution function, find ⟨1/v⟩, the mean value of the reciprocal of the velocity of molecules in an ideal gas at a temperature T, if the mass of each molecule is equal to m. Compare the value obtained with the reciprocal of the mean velocity.

Solution. ⟨1/v⟩ = ∫0∞(m/(2πkT))3/2e−mv2/2kT4πv2dv(1/v) = (m/(2πkT))3/24π(1/2)(2kT/m)∫0∞e−xdx = 2(m/(2πkT))1/2 = (2m/(πkT))1/2 = (16m π/(π2·8kT))1/2 = 4/(π⟨v⟩).

Teacher's Note: The 1/v factor cancels one v from 4πv²; remaining integral of v e^{-av²}.

Exam Note: ⟨1/v⟩ = 4/(π⟨v⟩) exceeds 1/⟨v⟩.

Question 96. A gas consists of molecules of mass m and is at a temperature T. Making use of the Maxwell velocity distribution function, find the corresponding distribution of the molecules over the kinetic energies ε. Determine the most probable value of the kinetic energy εp. Does εp correspond to the most probable velocity?

Solution. dN(v) = N(m/(2πkT))3/2e−mv2/2kT4πv2dv = dN(ε) = (dN(ε)/dε)dε, so dN(ε)/dε = N(m/(2πkT))3/2e−mv2/2kT4πv2dv/dε. Now ε = (1/2)mv2, so dv/dε = 1/(mv). Then
dN(ε)/dε = N(m/(2πkT))3/2e−ε/kT4π√(2ε/m)(1/m) = N(2/√π)(kT)−3/2e−ε/kTε1/2,
i.e. dN(ε) = N(2/√π)(kT)−3/2e−ε/kTε1/2dε.
The most probable kinetic energy is given by d/dε[dN(ε)/dε] = 0, or (1/2)ε−1/2e−ε/kT − (ε1/2/kT)e−ε/kT = 0, or ε = (1/2)kT = εp.
The corresponding velocity is v = √(kT/m) ≠ vp = √(2kT/m). So no, εp does not correspond to the most probable velocity.

Teacher's Note: Change variables v→ε with dv/dε = 1/(mv); maxima differ because the Jacobian changes the shape.

Exam Note: Answer: ε_p = kT/2, not ½mv_p² = kT.

Question 97. What fraction of monatomic molecules of a gas in a thermal equilibrium possesses kinetic energies differing from the mean value by δη = 1.0% and less?

Solution. The mean kinetic energy is ⟨ε⟩ = ∫0∞ε3/2e−ε/kTdε / ∫0∞ε1/2e−ε/kTdε = kTΓ(5/2)/Γ(3/2) = (3/2)kT. Thus
δN/N = ∫(3/2)kT(1−δη)(3/2)kT(1+δη)(2/√π)(kT)−3/2e−ε/kTε1/2dε = (2/√π)e−3/2(3/2)3/22δη = 3√(6/π)e−3/2δη.
If δη = 1% this gives 0.9%.

Teacher's Note: Narrow band around ⟨ε⟩ = 3kT/2: fraction ≈ distribution value times band width 3kTδη.

Exam Note: Mean energy is 3kT/2; answer about 0.9%.

Question 98. What fraction of molecules in a gas at a temperature T has the kinetic energy of translational motion exceeding ε0 if ε0 ≫ kT?

Solution. ΔN/N = (2/√π)(kT)−3/2∫ε0∞√ε e−ε/kTdε ≈ (2/√π)(kT)−3/2√ε0∫ε0∞e−ε/kTdε (ε0 ≫ kT) = (2/√π)(kT)−3/2√ε0 kT e−ε0/kT = 2√(ε0/(πkT)) e−ε0/kT.
(In evaluating the integral, we have taken out √ε as √ε0 since the integral is dominated by the lower limit.)

Teacher's Note: For ε₀ ≫ kT the exponential dominates, so √ε can be frozen at √ε₀.

Exam Note: Mention the approximation made; Boltzmann tail.

Question 99. The velocity distribution of molecules in a beam coming out of a hole in a vessel is described by the function F(v) = Av3e−mv2/2kT, where T is the temperature of the gas in the vessel. Find the most probable values of (a) the velocity of the molecules in the beam; compare the result obtained with the most probable velocity of the molecules in the vessel; (b) the kinetic energy of the molecules in the beam.

Solution. (a) F(v) = Av3e−mv2/2kT. For the most probable value of the velocity dF/dv = 0, or 3Av2e−mv2/2kT − Av3(2mv/2kT)e−mv2/2kT = 0. So vpr = √(3kT/m).
This should be compared with the value vpr = √(2kT/m) for the Maxwellian distribution (the beam value is √(3/2) times larger).

(b) In terms of energy, ε = (1/2)mv2, F(ε) = Av3e−mv2/2kTdv/dε = A(2ε/m)3/2e−ε/kT(1/√(2mε)) = A(2ε/m2)e−ε/kT. From this the probable energy comes out as follows: F′(ε) = 0 implies (2A/m2)(e−ε/kT − (ε/kT)e−ε/kT) = 0, or εpr = kT.

Teacher's Note: Beam favours faster molecules (extra factor v), so peak shifts up to √(3kT/m).

Exam Note: Maximise v³e^{−…}; energy peak kT.

Question 100. An ideal gas consisting of molecules of mass m with concentration n has a temperature T. Using the Maxwell distribution function, find the number of molecules reaching a unit area of a wall at the angles between θ and θ + dθ to its normal per unit time.

Solution. The number of molecules reaching a unit area of wall at an angle between θ and θ + dθ to its normal per unit time is (a molecule at angle θ to the normal hits area dA if it comes from within a cylinder of height v cosθ; the fraction of molecules moving in solid angle dΩ is dΩ/4π, dΩ = 2π sinθ dθ):
dν = ∫v=0∞dn(v)(dΩ/4π)v cosθ = ∫0∞n(m/(2πkT))3/2e−mv2/2kTv3dv sinθ cosθ dθ × 2π = n(2kT/(πm))1/2∫0∞e−xx dx sinθ cosθ dθ = n(2kT/(πm))1/2 sinθ cosθ dθ.

Teacher's Note: Hits from direction θ: fraction dΩ/4π of molecules, each with flux v cosθ; integrate over speeds.

Exam Note: Include cosθ projection and 2π sinθ dθ solid angle.

Question 101. From the conditions of the foregoing problem find the number of molecules reaching a unit area of a wall with the velocities in the interval from v to v + dv per unit time.

Solution. Similarly the number of molecules reaching the wall per unit area of the wall with velocities in the interval v to v + dv per unit time is
dν = ∫θ=0π/2dn(v)(dΩ/4π)v cosθ = ∫0π/2n(m/(2πkT))3/2e−mv2/2kTv3dv sinθ cosθ dθ × 2π = nπ(m/(2πkT))3/2e−mv2/2kTv3dv.

Teacher's Note: Same flux formula, but integrate over θ from 0 to π/2 instead of over v.

Exam Note: ∫ sinθ cosθ dθ over 0..π/2 equals ½.

The Boltzmann Distribution

Question 102. Find the force exerted on a particle by a uniform field if the concentrations of these particles at two levels separated by the distance Δh = 3.0 cm (along the field) differ by η = 2.0 times. The temperature of the system is equal to T = 280 K.

Solution. If the force exerted is F then the law of variation of concentration with height reads n(z) = n0e−Fz/kT. So η = eFΔh/kT, or F = kT ln η/Δh = 9 × 10−20 N.

Teacher's Note: Boltzmann distribution n ∝ e^{−Fz/kT}; take ratio at two heights.

Exam Note: Take natural log of η; Δh in metres.

Question 103. When examining the suspended gamboge droplets under a microscope, their average numbers in the layers separated by the distance h = 40 μm were found to differ by η = 2.0 times. The environmental temperature is equal to T = 290 K. The diameter of the droplets is d = 0.40 μm, and their density exceeds that of the surrounding fluid by Δρ = 0.20 g/cm3. Find Avogadro's number from these data.

Solution. Here the effective (weight minus buoyancy) force is F = (π/6)d3Δρ g = RT ln η/(NAh), or NA = 6RT ln η/(πd3gΔρ h).

In the problem T = 290 K, η = 2, h = 4 × 10−5 m, d = 4 × 10−7 m, g = 9.8 m/s2, Δρ = 0.2 × 103 kg/m3 and R = 8.31 J/(mol·K). Hence NA = 6 × 8.31 × 290 × ln 2/(π × (4 × 10−7)3 × 9.8 × 200 × 4 × 10−5) = 6.36 × 1023 mol−1.

Teacher's Note: Perrin experiment: force = buoyancy-corrected weight, k = R/N_A in the Boltzmann factor.

Exam Note: Use Δρ in kg/m³ and h in metres.

Question 104. Suppose that η0 is the ratio of the molecular concentration of hydrogen to that of nitrogen at the Earth's surface, while η is the corresponding ratio at the height h = 3000 m. Find the ratio η/η0 at the temperature T = 280 K, assuming that the temperature and the free fall acceleration are independent of the height.

Solution. η = (concentration of H2)/(concentration of N2) = η0 e−MH2gh/RT/e−MN2gh/RT = η0e(MN2 − MH2)gh/RT.
So there is more N2 at the bottom: η/η0 = 1.39.

Teacher's Note: Barometric formula for each gas; the ratio keeps only the molar-mass difference in the exponent.

Exam Note: Exponent (M_N₂−M_H₂)gh/RT; answer 1.39.

Question 105. A tall vertical vessel contains a gas composed of two kinds of molecules of masses m1 and m2, with m2 > m1. The concentrations of these molecules at the bottom of the vessel are equal to n1 and n2 respectively, with n2 > n1. Assuming the temperature T and the free-fall acceleration g to be independent of the height, find the height at which the concentrations of these kinds of molecules are equal.

Solution. n1(h) = n1e−m1gh/kT, n2(h) = n2e−m2gh/kT. They are equal at a height h where n1/n2 = egh(m1 − m2)/kT, or h = (kT/g)(ln n1 − ln n2)/(m1 − m2).

Teacher's Note: Heavier molecules thin out faster, so n₂ eventually drops to n₁ at height h.

Exam Note: Both numerator and denominator are negative; h positive.

Question 106. A very tall vertical cylinder contains carbon dioxide at a certain temperature T. Assuming the gravitational field to be uniform, find how the gas pressure on the bottom of the vessel will change when the gas temperature increases η times.

Solution. At a temperature T the concentration n(z) varies with height according to n(z) = n0e−mgz/kT. This means that the cylinder contains ∫0∞n(z)dz = ∫0∞n0e−mgz/kTdz = n0kT/(mg) particles per unit area of the base. Clearly this cannot change. Thus n0kT = p0 = pressure at the bottom of the cylinder must not change with change of temperature.

Teacher's Note: Pressure at the bottom equals weight of gas per area, which is fixed since the number of molecules is fixed.

Exam Note: Answer: no change; reason via total weight.

Question 107. A very tall vertical cylinder contains a gas at a temperature T′. Assuming the gravitational field to be uniform, find the mean value of the potential energy of the gas molecules. Does this value depend on whether the gas consists of one kind of molecules or of several kinds?

Solution. ⟨U⟩ = ∫0∞mgz e−mgz/kT′dz / ∫0∞e−mgz/kT′dz = kT′ ∫0∞xe−xdx / ∫0∞e−xdx = kT′Γ(2)/Γ(1) = kT′.
When there are many kinds of molecules, this formula holds for each kind and the average energy ⟨U⟩ = ΣfikT′/Σfi = kT′, where fi ∝ fractional concentration of each kind at the ground level. So it does not depend on the kind of molecules.

Teacher's Note: Boltzmann average of mgz is exactly kT, independent of mass; weighted mean over kinds is again kT.

Exam Note: Answer kT, independent of molecule type.

Question 108. A horizontal tube of length l = 100 cm closed from both ends is displaced lengthwise with a constant acceleration w. The tube contains argon at a temperature T = 330 K. At what value of w will the argon concentrations at the tube's ends differ by η = 1.0%?

Solution. The constant acceleration is equivalent to a pseudo force wherein a concentration gradient is set up. Then e−MAwl/RT = 1 − η, or w = −RT ln(1 − η)/(MAl) ≈ ηRT/(MAl) = 70 g.

Teacher's Note: In the accelerating frame a pseudo-force mw gives a Boltzmann-type gradient along the tube.

Exam Note: Approximate ln(1−η) ≈ −η; w ≈ 70g.

Question 109. Find the mass of a mole of colloid particles if during their centrifuging with an angular velocity ω about a vertical axis the concentration of the particles at the distance r2 from the rotation axis is η times greater than that at the distance r1 (in the same horizontal plane). The densities of the particles and the solvent are equal to ρ and ρ0 respectively.

Solution. In a centrifuge rotating with angular velocity ω about an axis, there is a centrifugal acceleration ω2r where r is the radial distance from the axis. In a fluid, suspended colloidal particles experience an additional (buoyancy) force. If m is the mass of each particle then its volume is m/ρ and the excess force on this particle is (m/ρ)(ρ − ρ0)ω2r outward, corresponding to a potential energy −(m/2ρ)(ρ − ρ0)ω2r2. This gives rise to a concentration variation n(r) = n0exp(+(m/(2ρkT))(ρ − ρ0)ω2r2). Thus
n(r2)/n(r1) = η = exp(+(M/(2ρRT))(ρ − ρ0)ω2(r22 − r12)),
where m/k = M/R, M = NAm is the molar mass. Thus
M = 2ρRT ln η/((ρ − ρ0)ω2(r22 − r12)).

Teacher's Note: Effective potential energy is −(m/2ρ)(ρ−ρ₀)ω²r² (centrifugal minus buoyancy); apply Boltzmann ratio.

Exam Note: Include buoyancy factor (ρ−ρ₀)/ρ; convert m to molar mass.

Question 110. A horizontal tube with closed ends is rotated with a constant angular velocity ω about a vertical axis passing through one of its ends. The tube contains carbon dioxide at a temperature T = 300 K. The length of the tube is l = 100 cm. Find the value ω at which the ratio of molecular concentrations at the opposite ends of the tube is equal to η = 2.0.

Solution. The potential energy associated with each molecule is −(1/2)mω2r2 and there is a concentration variation n(r) = n0exp(mω2r2/2kT) = n0exp(Mω2r2/2RT). Thus η = exp(Mω2l2/2RT), or ω = √((2RT/(Ml2))ln η). Using M = 12 + 32 = 44 g, l = 100 cm, R = 8.31 × 107 erg/(mol·K), T = 300 K, we get ω = 280 rad/s.

Teacher's Note: In the rotating frame the centrifugal potential −mω²r²/2 gives a Boltzmann concentration ratio.

Exam Note: Axis at one end: compare r = l with r = 0.

Question 111. The potential energy of gas molecules in a certain central field depends on the distance r from the field's centre as U(r) = ar2, where a is a positive constant. The gas temperature is T, the concentration of molecules at the centre of the field is n0. Find: (a) the number of molecules located at the distances between r and r + dr from the centre of the field; (b) the most probable distance separating the molecules from the centre of the field; (c) the fraction of molecules located in the spherical layer between r and r + dr; (d) how many times the concentration of molecules in the centre of the field will change if the temperature decreases η times.

Solution. Here n(r) = n0exp(−ar2/kT).

(a) The number of molecules located at the distance between r and r + dr is 4πr2dr n(r) = 4πn0exp(−ar2/kT)r2dr.

(b) rpr is given by d/dr[r2n(r)] = 0, or 2r − 2ar3/kT = 0, or rpr = √(kT/a).

(c) The fraction of molecules lying between r and r + dr is dN/N = 4πr2dr n0exp(−ar2/kT) / ∫0∞4πr2dr n0exp(−ar2/kT). The integral ∫0∞4πr2exp(−ar2/kT)dr = (kT/a)3/24π∫0∞x e−xdx/(2√x) = (kT/a)3/22πΓ(3/2) = (πkT/a)3/2. Thus dN/N = (a/(πkT))3/24πr2dr exp(−ar2/kT).

(d) dN = N(a/(πkT))3/24πr2dr exp(−ar2/kT), so n0 = N(a/(πkT))3/2. When T decreases η times, n0 will increase η3/2 times. (The book prints the exponent as 1/2 in the intermediate line, a misprint; corrected to 3/2.)

Teacher's Note: Boltzmann factor times shell volume 4πr²dr gives the distribution; normalise with a Gamma integral.

Exam Note: Peak at r=√(kT/a); n₀ scales as T^{−3/2}.

Question 112. From the conditions of the foregoing problem find: (a) the number of molecules whose potential energy lies within the interval from U to U + dU; (b) the most probable value of the potential energy of a molecule; compare this value with the potential energy of a molecule located at its most probable distance from the centre of the field.

Solution. (a) Write U = ar2, or r = √(U/a), so dr = √(1/a)·dU/(2√U) = dU/(2√(aU)). So dN = n04π(U/a)(dU/(2√(aU)))exp(−U/kT) = 2πn0a−3/2U1/2exp(−U/kT)dU.

(b) The most probable value of U is given by d/dU(dN/dU) = 0 = (1/(2√U) − U1/2/kT)exp(−U/kT), or Upr = (1/2)kT. From Q.111(b), the potential energy at the most probable distance is kT (twice Upr).

Teacher's Note: Change variable r→U with dr = dU/(2√(aU)); the Jacobian shifts the peak to kT/2.

Exam Note: Compare U_pr = kT/2 with ar_pr² = kT.

Download IE Irodov Solutions for JEE Math PDF

Download IE Irodov Solutions for JEE

Explore reliable mathematical solutions for IE Irodov Solutions Chapter 11 Kinetic Theory Of Gases tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Step-by-Step Mathematical Explanations

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Additional Study Materials for 2026

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these IE Irodov Solutions for JEE Physics?

They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the IE Irodov JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these IE Irodov solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising IE Irodov JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.