Download JEE Physics IE Irodov Textbook Solutions: Chapter 01 Kinematics
Access comprehensive textbook solutions for Chapter 01 Kinematics using the IE Irodov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access IE Irodov Textbook Answers and Solutions
Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Kinematics - Problems 1 to 29
Chapter 1 Kinematics (Part 1)
Question 1. A motorboat going downstream overcame a raft at a point A; τ = 60 min later it turned back and after some time passed the raft at a distance l = 6.0 km from the point A. Find the flow velocity assuming the duty of the engine to be constant.
Solution. Let v0 be the stream velocity and v′ the velocity of the motorboat with respect to water. The motorboat reached point B while going downstream with velocity (v0 + v′) and then returned with velocity (v′ − v0) and passed the raft at point C. Let t be the time for the raft (which flows with the stream with velocity v0) to move from A to C, during which the motorboat moves from A to B and then from B to C. Therefore
l/v0 = τ + [(v0 + v′)τ − l]/(v′ − v0).
On solving we get v0 = l/(2τ) = 3.0 km/h.
Teacher's Note: In the water frame the raft is at rest, so the boat returns in the same time τ.
Exam Note: State the water-frame argument; answer 3.0 km/h with unit.
Question 2. A point traversed half the distance with a velocity v0. The remaining part of the distance was covered with velocity v1 for half the time, and with velocity v2 for the other half of the time. Find the mean velocity of the point averaged over the whole time of motion.
Solution. Let s be the total distance traversed by the point and t1 the time taken to cover half the distance. Further let 2t be the time to cover the rest half of the distance. Therefore
s/2 = v0t1 or t1 = s/(2v0) (1)
and s/2 = (v1 + v2)t or 2t = s/(v1 + v2) (2)
Hence the sought average velocity
⟨v⟩ = s/(t1 + 2t) = s/[s/(2v0) + s/(v1 + v2)] = 2v0(v1 + v2)/(v1 + v2 + 2v0).
Teacher's Note: Mean velocity is total distance over total time, not the average of speeds; add times, not speeds.
Exam Note: Write total s / total t; marks for both time expressions.
Question 3. A car starts moving rectilinearly, first with acceleration w = 5.0 m/s² (the initial velocity is equal to zero), then uniformly, and finally, decelerating at the same rate w, comes to a stop. The total time of motion equals τ = 25 s. The average velocity during that time is equal to ⟨v⟩ = 72 km per hour. How long does the car move uniformly?
Solution. As the car starts from rest and finally comes to a stop, and the rate of acceleration and deceleration are equal, the distances as well as the times taken are the same in these phases of motion. Let Δt be the time for which the car moves uniformly. Then the acceleration/deceleration time is (τ − Δt)/2 each. So,
⟨v⟩τ = 2{(1/2)w[(τ − Δt)/2]²} + w[(τ − Δt)/2]Δt
or Δt² = τ² − 4⟨v⟩τ/w.
Hence Δt = τ√(1 − 4⟨v⟩/(wτ)) = 15 s.
Teacher's Note: Convert 72 km/h to 20 m/s first; the area under the v–t trapezium equals distance.
Exam Note: Unit conversion and the trapezium area give the marks.
Question 4. A point moves rectilinearly in one direction. Fig. 1.1 shows the distance s traversed by the point as a function of the time t. Using the plot find: (a) the average velocity of the point during the time of motion; (b) the maximum velocity; (c) the time moment t0 at which the instantaneous velocity is equal to the mean velocity averaged over the first t0 seconds.
Fig. 1.1: s (in m) against t (in s). The curve starts flat at the origin, rises slowly to about 4 m at t = 10 s, then steeply to about 20 m by t = 20 s, and stays at 20 m afterwards.
Solution. (a) Sought average velocity ⟨v⟩ = s/t = 200 cm/20 s = 10 cm/s.
(b) For the maximum velocity, ds/dt should be maximum. From the figure ds/dt is maximum for all points on the line ac, thus the sought maximum velocity becomes the average velocity for the line ac and is equal to bc/ab = 100 cm/4 s = 25 cm/s.
(c) Time t0 should be such that the slope ds/dt at that point satisfies ds/dt = s/t0, i.e. the tangent passes through the origin. From the figure the tangent at point d passes through the origin and thus the corresponding time is t = t0 = 16 s.
Teacher's Note: Velocity is the slope of the s–t curve; part (c) asks where the tangent passes through the origin.
Exam Note: Draw the tangent from the origin; read values carefully.
Question 5. Two particles, 1 and 2, move with constant velocities v1 and v2. At the initial moment their radius vectors are equal to r1 and r2. How must these four vectors be interrelated for the particles to collide?
Solution. Let the particles collide at the point A (Fig.), whose position vector is r3 (say). If t be the time taken by each particle to reach point A, from the triangle law of vector addition:
r3 = r1 + v1t = r2 + v2t
so, r1 − r2 = (v2 − v1)t (1)
therefore, t = |r1 − r2|/|v2 − v1| (2)
From Eqs. (1) and (2)
(r1 − r2)/|r1 − r2| = (v2 − v1)/|v2 − v1|,
which is the sought relationship.
Teacher's Note: Collision means equal position vectors at the same time; relative velocity must point along the initial separation.
Exam Note: Equate positions at time t; eliminate t.
Question 6. A ship moves along the equator to the east with velocity v0 = 30 km/hour. The southeastern wind blows at an angle φ = 60° to the equator with velocity v = 15 km/hour. Find the wind velocity v′ relative to the ship and the angle φ′ between the equator and the wind direction in the reference frame fixed to the ship.
Solution. We have v′ = v − v0 (1)
v′ = √(v0² + v² + 2v0v cos φ) = 39.7 km/h (2)
and v′/sin(π − φ) = v/sin θ, or sin θ = v sin φ/v′, or θ = sin−1(v sin φ/v′).
Using (2) and putting the values of v and φ, θ = 19.1°.
Teacher's Note: Relative velocity is vector subtraction; use the triangle and sine rule for the angle.
Exam Note: Draw the velocity triangle; give magnitude and angle.
Question 7. Two swimmers leave point A on one bank of the river to reach point B lying right across on the other bank. One of them crosses the river along the straight line AB while the other swims at right angles to the stream and then walks the distance that he has been carried away by the stream to get to point B. What was the velocity u of his walking if both swimmers reached the destination simultaneously? The stream velocity v0 = 2.0 km/hour and the velocity v′ of each swimmer with respect to water equals 2.5 km per hour.
Solution. Let one of the swimmers (say 1) cross the river along AB, which is obviously the shortest path. Time taken to cross the river by swimmer 1 (where AB = d is the width of the river):
t1 = d/√(v′² − v0²) (1)
For the other swimmer (say 2), which follows the quickest path, the time taken to cross the river is t2 = d/v′ (2).
In the time t2, drifting of swimmer 2 becomes x = v0t2 = (v0/v′)d (using Eq. 2) (3).
If t3 be the time for swimmer 2 to walk the distance x to come from C to B, then t3 = x/u = v0d/(v′u) (using Eq. 3) (4).
According to the problem t1 = t2 + t3, or d/√(v′² − v0²) = d/v′ + v0d/(v′u).
On solving we get u = v0/[(1 − v0²/v′²)−1/2 − 1] = 3 km/h.
Teacher's Note: Equate total times; the river width d cancels out.
Exam Note: Cancel d early; check 3 km/h numerically.
Question 8. Two boats, A and B, move away from a buoy anchored at the middle of a river along the mutually perpendicular straight lines: the boat A along the river, and the boat B across the river. Having moved off an equal distance from the buoy the boats returned. Find the ratio of times of motion of boats τA/τB if the velocity of each boat with respect to water is η = 1.2 times greater than the stream velocity.
Solution. Let l be the distance covered by the boat A along the river as well as by the boat B across the river. Let v0 be the stream velocity and v′ the velocity of each boat with respect to water. Therefore time taken by the boat A in its journey
tA = l/(v′ + v0) + l/(v′ − v0)
and for the boat B tB = l/√(v′² − v0²) + l/√(v′² − v0²) = 2l/√(v′² − v0²).
Hence, tA/tB = v′/√(v′² − v0²) = η/√(η² − 1), where η = v′/v0.
On substitution tA/tB = 1.8.
Teacher's Note: Along the stream the boat loses more going back than it gains; across, it must head upstream at an angle.
Exam Note: Write both round-trip times; ratio 1.8 for η = 1.2.
Question 9. A boat moves relative to water with a velocity which is n = 2.0 times less than the river flow velocity. At what angle to the stream direction must the boat move to minimize drifting?
Solution. Let v0 be the stream velocity and v′ the velocity of the boat with respect to water. As v0/v′ = η = 2 > 0, some drifting of the boat is inevitable. Let v′ make an angle θ with the flow direction (Fig.). Then the time taken to cross the river is t = d/(v′ sin θ) (where d is the width of the river). In this time interval, the drifting of the boat is
x = (v′ cos θ + v0)t = (v′ cos θ + v0)d/(v′ sin θ) = (cot θ + η cosec θ)d.
For xmin (minimum drifting) d/dθ (cot θ + η cosec θ) = 0, which yields cos θ = −1/η = −1/2.
Hence, θ = 120°.
Teacher's Note: Drift as a function of heading angle; minimise by differentiating. If v′ < v0, cos θ = −v′/v0.
Exam Note: Set dx/dθ = 0; angle measured from stream direction.
Question 10. Two bodies were thrown simultaneously from the same point: one, straight up, and the other, at an angle of θ = 60° to the horizontal. The initial velocity of each body is equal to v0 = 25 m/s. Neglecting the air drag, find the distance between the bodies t = 1.70 s later.
Solution. The solution of this problem becomes simple in the frame attached with one of the bodies. Let the body thrown straight up be 1 and the other body be 2; then for body 1 in the frame of 2, from the kinematic equation for constant acceleration,
r12 = r0(12) + v0(12)t + (1/2)w12t²
So, r12 = v0(12)t (because w12 = 0 and r0(12) = 0), or |r12| = |v0(12)|t (1).
But |v01| = |v02| = v0. So, from the properties of the triangle
v0(12) = √(v0² + v0² − 2v0v0 cos(π/2 − θ)).
Hence, the sought distance |r12| = v0√(2(1 − sin θ)) t = 22 m.
Teacher's Note: In a freely falling frame both bodies move uniformly; the gravity terms cancel in the relative motion.
Exam Note: Use relative velocity; angle between velocities is 30°.
Question 11. Two particles move in a uniform gravitational field with an acceleration g. At the initial moment the particles were located at one point and moved with velocities v1 = 3.0 m/s and v2 = 4.0 m/s horizontally in opposite directions. Find the distance between the particles at the moment when their velocity vectors become mutually perpendicular.
Solution. Let the velocities of the particles (say v1′ and v2′) become mutually perpendicular after time t. Then their velocities become
v1′ = v1 + gt; v2′ = v2 + gt (1)
As v1′ ⊥ v2′, v1′·v2′ = 0, or (v1 + gt)·(v2 + gt) = 0, or −v1v2 + g²t² = 0 (2).
Hence, t = √(v1v2)/g (3).
Now from the equation r12 = r0(12) + v0(12)t + (1/2)w12t², |r12| = |v0(12)|t (because here w12 = 0 and r0(12) = 0), so
|r12| = [(v1 + v2)/g]√(v1v2) (as |v0(12)| = v1 + v2).
Numerically (g = 9.8 m/s²) this is 2.5 m.
Teacher's Note: Perpendicular velocities mean zero dot product; horizontal parts are opposite, vertical parts equal.
Exam Note: Dot product zero gives t; evaluate 2.5 m.
Question 12. Three points are located at the vertices of an equilateral triangle whose side equals a. They all start moving simultaneously with velocity v constant in modulus, with the first point heading continually for the second, the second for the third, and the third for the first. How soon will the points converge?
Solution. From the symmetry of the problem all the three points are always located at the vertices of equilateral triangles of varying side length and finally meet at the centroid of the initial equilateral triangle, in the sought time interval (say t). Let us consider an arbitrary equilateral triangle of edge length l (say). Then the rate by which 1 approaches 2, 2 approaches 3, and 3 approaches 1, becomes
−dl/dt = v − v cos(2π/3) = 3v/2.
On integrating: −∫a0 dl = (3v/2)∫0t dt, so a = (3/2)vt, and t = 2a/(3v).
Teacher's Note: Symmetry keeps the triangle equilateral; the approach rate along a side is v(1 + cos 60°).
Exam Note: Use symmetry, then integrate the closing rate.
Question 13. Point A moves uniformly with velocity v so that the vector v is continually "aimed" at point B which in its turn moves rectilinearly and uniformly with velocity u < v. At the initial moment of time v ⊥ u and the points are separated by a distance l. How soon will the points converge?
Solution. Let us locate the points A and B at an arbitrary instant of time. If A and B are separated by the distance s at this moment, then the points converge, or point A approaches B, with velocity −ds/dt = v − u cos α, where angle α varies with time. On integrating,
−∫l0 ds = ∫0T (v − u cos α) dt, (where T is the sought time) or l = ∫0T (v − u cos α) dt (1).
As both A and B cover the same distance in the x-direction during the sought time interval, the other condition required is obtained from Δx = ∫vx dt. So uT = ∫0T v cos α dt (2).
Solving (1) and (2), we get T = vl/(v² − u²). Corrected: the book prints T = ul/(v² − u²), but substituting (2) into (1) gives l = vT − u·(uT/v) = T(v² − u²)/v, so T = vl/(v² − u²). One can see that if u = v, or u > v, point A cannot catch B.
Teacher's Note: Two conditions: closing rate integrated gives l; equal x-displacements give the second equation.
Exam Note: Combine both equations; T = vl/(v² − u²).
Question 14. A train of length l = 350 m starts moving rectilinearly with constant acceleration w = 3.0·10−2 m/s²; t = 30 s after the start the locomotive headlight is switched on (event 1), and τ = 60 s after that event the tail signal light is switched on (event 2). Find the distance between these events in the reference frames fixed to the train and to the Earth. How and at what constant velocity V relative to the Earth must a certain reference frame K move for the two events to occur in it at the same point?
Solution. In the reference frame fixed to the train, the distance between the two events is obviously equal to l. Suppose the train starts moving at time t = 0 in the positive x direction and take the origin (x = 0) at the headlight of the train at t = 0. Then the coordinate of the first event in the earth's frame is x1 = (1/2)wt² and similarly the coordinate of the second event is x2 = (1/2)w(t + τ)² − l. The distance between the two events is obviously x1 − x2 = l − wτ(t + τ/2) = 0.242 km in the reference frame fixed on the earth.
For the two events to occur at the same point in the reference frame K, moving with constant velocity V relative to the earth, the distance travelled by the frame in the time interval τ must be equal to the above distance. Thus Vτ = l − wτ(t + τ/2). So, V = l/τ − w(t + τ/2) = 4.03 m/s.
The frame K must clearly be moving in a direction opposite to the train so that if (for example) the origin of the frame coincides with the point x1 on the earth at time t, it coincides with the point x2 at time t + τ.
Teacher's Note: Events are separated in time; the earth-frame distance differs from l because the train moves between them.
Exam Note: Compute x1 − x2 = 242 m; V = 4.03 m/s opposite.
Question 15. An elevator car whose floor-to-ceiling distance is equal to 2.7 m starts ascending with constant acceleration 1.2 m/s²; 2.0 s after the start a bolt begins falling from the ceiling of the car. Find: (a) the bolt's free fall time; (b) the displacement and the distance covered by the bolt during the free fall in the reference frame fixed to the elevator shaft.
Solution. (a) One good way to solve the problem is to work in the elevator's frame having the observer at its bottom. Let us denote the separation between floor and ceiling by h = 2.7 m and the acceleration of the elevator by w = 1.2 m/s². From the kinematical formula y = y0 + v0yt + (1/2)wyt² (1). Here y = 0, y0 = +h, v0y = 0 and wy = wbolt(y) − wele(y) = (−g) − (w) = −(g + w). So, 0 = h + (1/2){−(g + w)}t², or t = √(2h/(g + w)) = 0.7 s.
(b) The velocity of the bolt (and elevator) at the instant of release is v0 = (1.2)(2) = 2.4 m/s. In the reference frame attached with the elevator shaft (ground) and pointing the y-axis upward, we have for the displacement of the bolt Δy = v0yt + (1/2)wyt² = v0t + (1/2)(−g)t² = (2.4)(0.7) + (1/2)(−9.8)(0.7)² = −0.7 m. Hence the bolt comes down, i.e. is displaced downward by 0.7 m relative to the point where it loses contact with the elevator.
Obviously the total distance covered by the bolt during its free fall time s = |Δy| + 2(v0²/2g) = 0.7 m + (2.4)²/(9.8) m = 1.3 m.
Teacher's Note: Relative acceleration in the lift frame is g + w; in the ground frame the bolt first rises, then falls.
Exam Note: Distance exceeds displacement: bolt rises 0.29 m first.
Question 16. Two particles, 1 and 2, move with constant velocities v1 and v2 along two mutually perpendicular straight lines toward the intersection point O. At the moment t = 0 the particles were located at the distances l1 and l2 from the point O. How soon will the distance between the particles become the smallest? What is it equal to?
Solution. Let particles 1 and 2 be at points B and A at t = 0 at the distances l1 and l2 from the intersection point O. Let us fix the inertial frame with particle 2. Now particle 1 moves relative to this reference frame with a relative velocity v12 = v1 − v2 and its trajectory is the straight line BP. Obviously, the minimum distance between the particles is equal to the length of the perpendicular AP dropped from point A on to the straight line BP.
From the velocity triangle, v12 = √(v1² + v2²), and tan θ = v1/v2 (1).
The shortest distance AP = AM sin θ = (OA − OM) sin θ = (l2 − l1 cot θ) sin θ, or AP = (l2 − l1v2/v1)·v1/√(v1² + v2²) = (v1l2 − v2l1)/√(v1² + v2²) (using 1).
The sought time can be obtained directly from the condition that (l1 − v1t)² + (l2 − v2t)² is minimum. This gives t = (l1v1 + l2v2)/(v1² + v2²).
(Figure not redrawn: particle 1 starts at B on the horizontal line a distance l1 from O, particle 2 at A on the vertical line a distance l2 from O; line BP is the path of 1 as seen from 2.)
Teacher's Note: Go to particle 2's frame: the minimum separation is the perpendicular from A to the relative path.
Exam Note: Alternative: minimise squared distance; both answers expected.
Question 17. From point A located on a highway one has to get by car as soon as possible to point B located in the field at a distance l from the highway. It is known that the car moves in the field η times slower than on the highway. At what distance from point D one must turn off the highway? (D is the point on the highway nearest to B.)
Solution. Let the car turn off the highway at a distance x from the point D. So, CD = x, and if the speed of the car in the field is v, then the time taken by the car to cover the distance AC = AD − x on the highway is t1 = (AD − x)/(ηv) (1), and the time taken to travel the distance CB in the field is t2 = √(l² + x²)/v (2). So, the total time elapsed to move the car from A to B is t = t1 + t2 = (AD − x)/(ηv) + √(l² + x²)/v. For t to be minimum, dt/dx = 0, or (1/v)[−1/η + x/√(l² + x²)] = 0, or η²x² = l² + x², or x = l/√(η² − 1).
(Fig. 1.2 not redrawn: A, C, D lie on the highway in that order; B is at distance l from D, perpendicular to the highway; CB = √(l² + x²).)
Teacher's Note: This is Snell's-law type optimisation: highway speed is η times field speed. Minimise total time.
Exam Note: Differentiate t(x); answer needs η > 1 and x ≤ AD.
Question 18. A point travels along the x axis with a velocity whose projection vx is presented as a function of time by the plot in Fig. 1.3. Assuming the coordinate of the point x = 0 at the moment t = 0, draw the approximate time dependence plots for the acceleration wx, the x coordinate, and the distance covered s.
Fig. 1.3: vx rises linearly from 0 at t = 0 to 1 at t = 1, stays at 1 until t = 3, falls linearly through 0 at t = 4 to −2 at t = 6, then rises linearly to 0 at t = 7.
Solution. To plot x(t), s(t) and wx(t) let us partition the given plot vx(t) into five segments (for detailed analysis).
Part 0–1: wx = 1 and vx = t. Thus Δx1(t) = ∫0t vxdt = t²/2 = s1(t). Putting t = 1: Δx1 = s = 1/2 unit.
Part 1–3: wx = 0 and vx = 1 (constant). Thus Δx2(t) = ∫1t dt = (t − 1) = s2(t). Putting t = 3: Δx2 = s2 = 2 units.
Part 3–4: wx = −1 and vx = 1 − (t − 3) = 4 − t. Thus Δx3(t) = ∫3t (4 − t)dt = 4t − t²/2 − 15/2 = s3(t). Putting t = 4: Δx3 = s3 = 1/2 unit.
Part 4–6: wx = −1 and vx = −(t − 4) = 4 − t, so the speed v = |vx| = t − 4 for t > 4. Thus Δx4(t) = ∫4t (4 − t)dt = 4t − t²/2 − 8. Putting t = 6: Δx4 = −2 units (the book prints −1; Corrected: 24 − 18 − 8 = −2, consistent with s4 = 2 below). Similarly s4(t) = ∫4t |vx|dt = t²/2 − 4t + 8. Putting t = 6: s4 = 2 units.
Part 6–7: wx = 2 and vx = −2 + 2(t − 6) = 2(t − 7); v = |vx| = 2(7 − t) for t ≤ 7. Now Δx5(t) = ∫6t 2(t − 7)dt = t² − 14t + 48. Putting t = 7: Δx5 = −1 unit. Similarly s5(t) = ∫6t 2(7 − t)dt = 14t − t² − 48. Putting t = 7: s5 = 1 unit.
On the basis of these expressions the wx(t), x(t) and s(t) plots can be easily plotted. Key points: wx = +1 (0–1 s), 0 (1–3 s), −1 (3–6 s), +2 (6–7 s). x(t) = 0, 0.5, 2.5, 3, 1, 0 at t = 0, 1, 3, 4, 6, 7. s(t) = 0, 0.5, 2.5, 3, 5, 6 at the same instants.
Teacher's Note: Acceleration is the slope of vx, x is the area under it (signed), s the area of |vx|.
Exam Note: Piecewise slopes and areas; x returns to origin.
Question 19. A point traversed half a circle of radius R = 160 cm during time interval τ = 10.0 s. Calculate the following quantities averaged over that time: (a) the mean velocity ⟨v⟩; (b) the modulus of the mean velocity vector |⟨v⟩|; (c) the modulus of the mean vector of the total acceleration |⟨w⟩| if the point moved with constant tangent acceleration.
Solution. (a) Mean velocity ⟨v⟩ = (total distance covered)/(time elapsed) = s/t = πR/τ = 50 cm/s (1).
(b) Modulus of mean velocity vector |⟨v⟩| = |Δr|/Δt = 2R/τ = 32 cm/s (2).
(c) Let the point move from i to f along the half circle and v0 and v be the speeds at the points respectively. We have dv/dt = wt, or v = v0 + wtt (as wt is constant, according to the problem). So ⟨v⟩ = ∫0t(v0 + wtt)dt/∫0tdt = [v0 + (v0 + wtt)]/2 = (v0 + v)/2 (3). So, from (1) and (3), (v0 + v)/2 = πR/τ (4). Now the modulus of the mean vector of total acceleration |⟨w⟩| = |Δv|/Δt = |v − v0|/τ = (v0 + v)/τ (5) (the final velocity is opposite to the initial one). Using (4) in (5) we get |⟨w⟩| = 2πR/τ² ≈ 10 cm/s².
Teacher's Note: Mean speed uses path length, mean velocity uses displacement; reversal of direction makes |Δv| = v₀ + v.
Exam Note: Distinguish the three averages; check 50, 32, 10.
Question 20. A radius vector of a particle varies with time t as r = at(1 − αt), where a is a constant vector and α is a positive factor. Find: (a) the velocity v and the acceleration w of the particle as functions of time; (b) the time interval Δt taken by the particle to return to the initial point, and the distance s covered during that time.
Solution. (a) We have r = at(1 − αt). So v = dr/dt = a(1 − 2αt) and w = dv/dt = −2αa.
(b) From the equation r = at(1 − αt), r = 0 at t = 0 and also at t = Δt = 1/α. So the sought time is Δt = 1/α.
As v = a(1 − 2αt), the speed is v = |v| = a(1 − 2αt) for t ≤ 1/(2α) and a(2αt − 1) for t > 1/(2α). Hence the sought distance s = ∫v dt = ∫01/2α a(1 − 2αt)dt + ∫1/2α1/α a(2αt − 1)dt. Simplifying, we get s = a/(2α).
Teacher's Note: Particle reverses at t = 1/(2α); distance counts both legs, so split the integral at the turning point.
Exam Note: Split integral at v = 0; distance a/(2α), not zero.
Question 21. At the moment t = 0 a particle leaves the origin and moves in the positive direction of the x axis. Its velocity varies with time as v = v0(1 − t/τ), where v0 is the initial velocity vector whose modulus equals v0 = 10.0 cm/s; τ = 5.0 s. Find: (a) the x coordinate of the particle at the moments of time 6.0, 10, and 20 s; (b) the moments of time when the particle is at the distance 10.0 cm from the origin; (c) the distance s covered by the particle during the first 4.0 and 8.0 s; draw the approximate plot s(t).
Solution. (a) As the particle leaves the origin at t = 0, Δx = x = ∫vxdt (1). As v = v0(1 − t/τ), where v0 is directed towards the +ve x-axis, vx = v0(1 − t/τ) (2). From (1) and (2), x = ∫0t v0(1 − t/τ)dt = v0t(1 − t/2τ) (3).
At t = 6 s: x = 10 × 6 (1 − 6/(2×5)) = 24 cm = 0.24 m. At t = 10 s: x = 10 × 10 (1 − 10/(2×5)) = 0. At t = 20 s: x = 10 × 20 (1 − 20/(2×5)) = −200 cm = −2 m.
(b) At the moments the particle is at a distance of 10 cm from the origin, x = ±10 cm. Putting x = +10 in Eq. (3): 10 = 10t(1 − t/10), or t² − 10t + 10 = 0, so t = [10 ± √(100 − 40)]/2 = 5 ± √15 s. Now putting x = −10 in Eq. (3): −10 = 10t(1 − t/10), which gives t = 5 ± √35 s. As t cannot be negative, t = (5 + √35) s. Hence the particle is at a distance of 10 cm from the origin at three moments of time: t = 5 − √15 s, 5 + √15 s and 5 + √35 s.
(c) We have v = v0(1 − t/τ). So the speed v = |v| = v0(1 − t/τ) for t ≤ τ and v0(t/τ − 1) for t > τ. So s = ∫0t v0(1 − t/τ)dt = v0t(1 − t/2τ) for t ≤ τ, and s = ∫0τ v0(1 − t/τ)dt + ∫τt v0(t/τ − 1)dt = v0τ[1 + (1 − t/τ)²]/2 for t > τ (A).
For t = 4 s: s = ∫04 10(1 − t/5)dt = 24 cm. For t = 8 s: s = ∫05 10(1 − t/5)dt + ∫58 10(t/5 − 1)dt; on integrating and simplifying, s = 34 cm.
On the basis of Eqs. (3) and (A), x(t) and s(t) plots can be drawn: s(t) rises to 25 cm at t = 5 s with slope decreasing to zero, and then keeps rising with slope increasing linearly (s = 34 cm at t = 8 s).
Teacher's Note: Distance differs from displacement after the particle reverses at t = τ; split the integral there.
Exam Note: Reversal at t = 5 s; distance = |forward| + |back|.
Question 22. The velocity of a particle moving in the positive direction of the x axis varies as v = α√x, where α is a positive constant. Assuming that at the moment t = 0 the particle was located at the point x = 0, find: (a) the time dependence of the velocity and the acceleration of the particle; (b) the mean velocity of the particle averaged over the time that the particle takes to cover the first s metres of the path.
Solution. As the particle is in unidirectional motion it is directed along the x-axis all the time. As at t = 0, x = 0, Δx = x = s, and dv/dt = w. Therefore, v = α√x = α√s, or w = dv/dt = (α/(2√s))(ds/dt) = αv/(2√s) = α·α√s/(2√s) = α²/2 (1).
As w = dv/dt = α²/2, on integrating ∫0v dv = ∫0t (α²/2)dt, or v = α²t/2 (2).
(b) Let t be the time to cover the first s metres of the path. From s = ∫v dt: s = ∫0t (α²/2)t dt = α²t²/4 (using 2), or t = (2/α)√s (3). The mean velocity of the particle ⟨v⟩ = ∫v(t)dt/∫dt = ∫02√s/α (α²/2)t dt/(2√s/α) = α√s/2.
Teacher's Note: Constant acceleration hides inside v = α√x; use v dv/dx. Mean velocity is distance over time.
Exam Note: Show w = α²/2; ⟨v⟩ = s/t = α√s/2.
Question 23. A point moves rectilinearly with deceleration whose modulus depends on the velocity v of the particle as w = a√v, where a is a positive constant. At the initial moment the velocity of the point is equal to v0. What distance will it traverse before it stops? What time will it take to cover that distance?
Solution. According to the problem −v dv/ds = a√v (as v decreases with time), or −∫v00 √v dv = a∫0s ds. On integrating we get s = 2v03/2/(3a).
Again according to the problem −dv/dt = a√v, or −dv/√v = a dt, or −∫v00 dv/√v = a∫0t dt. Thus t = 2√v0/a.
Teacher's Note: Use w = v dv/ds for distance and w = dv/dt for time; separate variables.
Exam Note: Two separate integrations; check dimensions of a.
Question 24. A radius vector of a point A relative to the origin varies with time t as r = ati − bt²j, where a and b are positive constants, and i and j are the unit vectors of the x and y axes. Find: (a) the equation of the point's trajectory y(x); plot this function; (b) the time dependence of the velocity v and acceleration w vectors, as well as of the moduli of these quantities; (c) the time dependence of the angle α between the vectors w and v; (d) the mean velocity vector averaged over the first t seconds of motion, and the modulus of this vector.
Solution. (a) As r = ati − bt²j, x = at, y = −bt², and therefore y = −bx²/a², which is the equation of a parabola (opening downwards, vertex at the origin), as shown in the figure.
(b) v = dr/dt = ai − 2btj (1). So v = √(a² + (−2bt)²) = √(a² + 4b²t²). Differentiating Eq. (1) with respect to time, w = dv/dt = −2bj. So |w| = w = 2b.
(c) cos α = v·w/(vw) = (ai − 2btj)·(−2bj)/[√(a² + 4b²t²)·2b], or cos α = 2bt/√(a² + 4b²t²), so tan α = a/(2bt), or α = tan−1(a/(2bt)).
(d) The mean velocity vector ⟨v⟩ = ∫vdt/∫dt = ∫0t (ai − 2btj)dt/t = ai − btj. Hence |⟨v⟩| = √(a² + b²t²).
Teacher's Note: Eliminate t for the trajectory; acceleration is constant, so angle changes only because v turns.
Exam Note: Differentiate r twice; α → 0 as t → ∞.
Question 25. A point moves in the plane xy according to the law x = at, y = at(1 − αt), where a and α are positive constants, and t is time. Find: (a) the equation of the point's trajectory y(x); plot this function; (b) the velocity v and the acceleration w of the point as functions of time; (c) the moment t0 at which the velocity vector forms an angle π/4 with the acceleration vector.
Solution. (a) We have x = at and y = at(1 − αt) (1). Hence y(x) becomes y = x(1 − αx/a) = x − (α/a)x², a parabola opening downwards through the origin and through x = a/α. (The book's printed expression for y(x) is missing from the scan; written here from Eq. (1).)
(b) Differentiating Eq. (1) we get vx = a and vy = a(1 − 2αt) (2). So v = √(vx² + vy²) = a√(1 + (1 − 2αt)²). Differentiating Eq. (2) with respect to time, wx = 0 and wy = −2aα. So w = √(wx² + wy²) = 2aα.
(c) From Eqs. (2) and (3) we have v = ai + a(1 − 2αt)j and w = −2aαj. So cos(π/4) = 1/√2 = v·w/(vw) = −a(1 − 2αt0)·2aα/[a√(1 + (1 − 2αt0)²)·2aα]. On simplifying, 1 − 2αt0 = ±1. As t0 ≠ 0, t0 = 1/α.
Teacher's Note: Velocity components separate: constant vx, linearly varying vy; acceleration is along −y only.
Exam Note: Check sign of cosine: only 1 − 2αt₀ = −1 fits.
Question 26. A point moves in the plane xy according to the law x = a sin ωt, y = a(1 − cos ωt), where a and ω are positive constants. Find: (a) the distance s traversed by the point during the time T; (b) the angle between the point's velocity and acceleration vectors.
Solution. Differentiating the motion law x = a sin ωt, y = a(1 − cos ωt) with respect to time, vx = aω cos ωt, vy = aω sin ωt. So v = aω cos ωt i + aω sin ωt j (1) and v = aω = const. (2). Differentiating Eq. (1) with respect to time, w = dv/dt = −aω² sin ωt i + aω² cos ωt j (3).
(a) The distance s traversed by the point during the time T is given by s = ∫0T v dt = ∫0T aω dt = aωT (using 2).
(b) Taking the inner product of v and w we get v·w = −a²ω³ sin ωt cos ωt + a²ω³ sin ωt cos ωt = 0. Thus v ⊥ w, i.e. the angle between the velocity vector and the acceleration vector equals π/2.
Teacher's Note: Motion is uniform on a circle of radius a; speed constant so acceleration is purely normal.
Exam Note: Constant speed gives s = aωT; dot product zero.
Question 27. A particle moves in the plane xy with constant acceleration w directed along the negative y axis. The equation of motion of the particle has the form y = ax − bx², where a and b are positive constants. Find the velocity of the particle at the origin of coordinates.
Solution. According to the problem w = w(−j). So, wx = dvx/dt = 0 and wy = dvy/dt = −w (1). Differentiating the equation of trajectory, y = ax − bx², with respect to time: dy/dt = a dx/dt − 2bx dx/dt (2). So (dy/dt)x=0 = a(dx/dt)x=0. Again differentiating with respect to time: d²y/dt² = a d²x/dt² − 2b(dx/dt)² − 2bx d²x/dt², or −w = a(0) − 2b(dx/dt)² − 2bx(0) (using 1), or dx/dt = √(w/2b) (3). Using (3) in (2), (dy/dt)x=0 = a√(w/2b) (4). Hence the velocity of the particle at the origin v = √[(dx/dt)²x=0 + (dy/dt)²x=0] = √(w/2b + a²w/2b) (using Eqs. 3 and 4). Hence, v = √[(w/2b)(1 + a²)].
Teacher's Note: Horizontal velocity is constant; differentiate the trajectory twice to link w with ẋ.
Exam Note: Differentiate y(x) twice with respect to t.
Question 28. A small body is thrown at an angle to the horizontal with the initial velocity v0. Neglecting the air drag, find: (a) the displacement of the body as a function of time r(t); (b) the mean velocity vector ⟨v⟩ averaged over the first t seconds and over the total time of motion.
Solution. As the body is under gravity of constant acceleration g, its velocity and displacement vectors are v = v0 + gt (1) and Δr = r = v0t + (1/2)gt² (r = 0 at t = 0) (2).
(b) So ⟨v⟩ over the first t seconds = Δr/Δt = r/t = v0 + gt/2 (3).
For the total time of motion τ (time of flight) we have from Eq. (3) ⟨v⟩ = v0 + gτ/2 (4). For evaluating τ take v·v = (v0 + gt)·(v0 + gt) = v0² + 2(v0·g)t + g²t² (5) (the scan prints the middle term without the factor 2; it is needed, as shown in the next step). At the landing point (same horizontal level; also from energy conservation) v = v0, so using this in Eq. (5): v0² = v0² + 2(v0·g)τ + g²τ². As τ ≠ 0, τ = −2(v0·g)/g². Putting this value of τ in Eq. (4), the average velocity over the time of flight is ⟨v⟩ = v0 − g(v0·g)/g². Corrected: factor 2 restored in Eq. (5).
Teacher's Note: Mean velocity = displacement/time; total flight time follows from speed equal to v₀ on landing at the same level.
Exam Note: Mean velocity over flight is horizontal: v₀ cos α.
Question 29. A body is thrown from the surface of the Earth at an angle α to the horizontal with the initial velocity v0. Assuming the air drag to be negligible, find: (a) the time of motion; (b) the maximum height of ascent and the horizontal range; at what value of the angle α they will be equal to each other; (c) the equation of trajectory y(x), where y and x are displacements of the body along the vertical and the horizontal respectively; (d) the curvature radii of trajectory at its initial point and at its peak.
Solution. The body thrown in air with velocity v0 at an angle α from the horizontal lands at point P on the Earth's surface at the same horizontal level. The point of projection is taken as origin, so Δx = x and Δy = y.
(a) From Δy = v0yt + (1/2)wyt²: 0 = v0 sin α τ − (1/2)gτ². As τ ≠ 0, the time of motion τ = 2v0 sin α/g.
(b) At the maximum height of ascent vy = 0, so from vy² = v0y² + 2wyΔy: 0 = (v0 sin α)² − 2gH. Hence the maximum height H = v0² sin²α/(2g). The horizontal range is obtained from Δx = v0xt + (1/2)wxt²: R = v0 cos α τ − (1/2)(0)τ² = v0 cos α τ = v0² sin 2α/g. When R = H: v0² sin 2α/g = v0² sin²α/(2g), or tan α = 4, so α = tan−1 4.
(c) For the body, x(t) and y(t) are x = v0 cos α t (1) and y = v0 sin α t − (1/2)gt² (2). Hence putting the value of t from (1) into (2) we get y = v0 sin α (x/(v0 cos α)) − (1/2)g(x/(v0 cos α))² = x tan α − gx²/(2v0² cos²α), which is the sought equation of trajectory y(x).
(d) As the body thrown in air follows a curve, it has some normal acceleration at all the moments of time during its motion in air. At the initial point (x = 0, y = 0), from wn = v²/R (where R is the radius of curvature): g cos α = v0²/R0, or R0 = v0²/(g cos α). At the peak point vy = 0, v = vx = v0 cos α and the tangential acceleration is zero. Now from wn = v²/R: g = v0² cos²α/R, or R = v0² cos²α/g.
Note (book): the formula R = [1 + (dy/dx)²]3/2/|d²y/dx²| may also be used for part (d).
Teacher's Note: At the top the whole acceleration g is normal; at launch only its component g cos α is normal.
Exam Note: Four parts; R = H gives tan α = 4.
Download IE Irodov Solutions for JEE Math PDF
Complete Math Solutions for IE Irodov Solutions Chapter 1 Kinematics Part 1
Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 1 Kinematics Part 1 PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Step-by-Step Mathematical Explanations
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Explore More Study Resources for JEE Math
In addition to these IE Irodov Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.