ICT Resources Unit 04 Network Administration Notes Set 01

Download Computer Science Useful Resources

Review targeted academic resources with the ICT Resources Unit 04 Network Administration Notes Set 01. Built according to official standards for the 2026-27 term, these downloadable Computer Science study materials support effective daily practice and deeper conceptual understanding for Networking in Computers.

Access Study Guides and Summaries

Navigate directly to the advanced Computer Science study materials using the digital viewer below. Each resource pack includes detailed conceptual summaries and solved practice questions, allowing students to instantly reinforce their learning.

This page explains how a Windows NT based network is installed and administered: naming a machine, adding TCP/IP and a network adapter, and configuring DNS and WINS. It also covers network management models and SNMP, users and groups, shared printers and printer pooling, NFS and Windows file sharing, and client configuration.

Installing and Configuring the Network Using a Windows NT Based System

Configuring Windows NT

This section presents an outline of the steps to follow for getting Windows NT to cooperate with Samba. You should perform these steps as the "Administrator" user. There are six basic steps:

1. Assign the machine a name.
2. Install the Workstation service.
3. Install the TCP/IP protocol.
4. Set the machine's name and IP address.
5. Configure the DNS and WINS name services.
6. Bind the protocol and service together.

Name the Machine

The first thing you need to do is to give the machine a NetBIOS name.

1. From the Control Panel, double click on the Network icon. This will take you to the Network dialog box for the machine.
2. The first tab in this dialog box should be the Identification tab. Here, you need to identify your machine with a name. However, you cannot edit either name here; instead you must use the Change button below the two text fields.
3. Pressing this button raises an Identification Changes dialog box, where you can reset the workgroup and the machine name.

Installing the TCP/IP Protocol

1. Select the Protocols tab in the Network dialog box, and look to see if you have the TCP/IP protocol installed.
2. If the protocol is not installed, you need to add it. Press the Add button, which will display the Select Network Protocol dialog box.
3. You should immediately see the TCP/IP protocol as one of the last protocols listed. Select TCP/IP as the protocol and confirm it.

Installing the Workstation Service

After installing TCP/IP, press the Services tab in the Network panel and check that you have a Workstation service. The Workstation service is mandatory. The service is installed by default on both Windows NT Workstation 4.0 and Server 4.0. If it is not there, you can install it much like TCP/IP: press the Add button and then select Workstation Service.

Configuring TCP/IP

After you have installed the Workstation service, return to the Protocols tab and select the TCP/IP Protocol entry in the window. Then click the Properties button below the window. The Microsoft TCP/IP Protocol panel will be displayed. You will need to work on three of its tabs: IP address, DNS and WINS address.

IP Address Tab

Select the "Specify an IP address" radio button and enter the computer's address and subnet mask in the space provided for the proper adapter. If you use DHCP on your network, select the "Obtain an IP Address from a DHCP server" button. The gateway field refers to a machine typically known as a router. If you have routers connecting multiple networks, you should put in the IP address of the one on your subnet. Back in the Microsoft TCP/IP Properties window, select the DNS Address tab.

DNS Tab

1. From the DNS tab, enter the host name of the machine in the Host Name box and the domain name in the Domain box.
2. At the DNS Service Search Order box, press the Add button and enter the address of the primary DNS server in the window that appears.
3. Once again, press the Add button, this time entering the address of the secondary DNS server.
4. At the DNS Suffix Search Order box, press the Add button and enter the first domain suffix in the window that appears.
5. Once again, press the Add button, this time entering the next domain suffix.
6. Back in the Microsoft TCP/IP Properties window, select the WINS Address tab.

WINS Address Tab

1. Enter the address of the primary WINS server in the Primary WINS Server box.
2. Enter the address of the secondary WINS server in the Secondary WINS Server box.
3. Once you have done this, press the OK button.
4. If Windows asks you to restart your computer, select No. You will be returned to the Network control panel.

Hosts Files

If you do not have either DNS or WINS, and you do not wish to use broadcast name resolution, use a hosts file. The Windows host file should appear in the \WINDOWS\HOSTS directory of whatever local drive Windows is installed on.

Bindings

The term bindings is a way of saying "connected together at configuration time." It means that the TCP/IP protocol will channel through the Ethernet card and is actually connected properly. To check, return to the Network dialog box, set the Show field to "all services" and click on all the + buttons in the tree. This means that the Workstation, Server and NetBIOS interface services are connected to the WINS client. This is the correct binding for Microsoft TCP/IP.

Adding Network Adapter

From the Network control panel, select the Adapters tab. Inside the Adapters tab, press the Add button.

Selecting Network Adapter

A new window will appear titled Select Network Adapter. If your Ethernet card is listed in the Network Adapters box, select it and press the OK button. Otherwise, press the Have Disk button, and insert the disk that came with your Ethernet card.

Configuring Network Adapter

A network card setup window will appear. Here you must set the IRQ Level and I/O Port Addresses to the values selected when you installed your card. Once you have done this, press the OK button.

Configuring Network Adapter Type

A network adapter bus location window will appear. Here, select either ISA or PCI depending on your card type. Do not change the value in the Number field; it should remain at 0. Once you have done this, press the OK button. You will be returned to the Network control panel. From the Network control panel, press the Close button. When Windows asks you if you wish to restart, restart Windows. Once you have restarted your computer, you will have full network access from your computer.

Administration of Windows NT Based Network

Introduction to Network Administration

Workstations: a workstation is a client computer. It is used to run applications. It is connected to a server from which it obtains data shared with other computers.

Servers: Connecting Computer Systems

Network computers share data, software and hardware resources. All workstations and modems, scanners and printers are connected.

Network Server Environment

Multiple users and devices can be managed by a network server. All the workstations are connected to the network server.

Client/Server Environment

Data can be located on one server or located across a number of servers. Here data can be stored and distributed across the servers.

Server Farm

In a server farm, all the web servers are connected to a firewall, and Database 1 and Database 2 are connected to a switch.

Client-Server Interaction

The following services are connected to the NOS server:

1. HTTP service
2. Telnet service
3. FTP service
4. APPS

Network Operating Systems

Network Operating System considerations are security, performance and management.

Windows OS

Windows 2000 comes as Professional, Server, Advanced Server and .NET.

UNIX Types

Popular versions of Linux are the following:

1. Red Hat Linux
2. Open Linux
3. Corel Linux
4. Slackware
5. Debian
6. GNU/Linux
7. SuSE Linux

Apple

Mac OS X version 10.1 offers:

1. Faster overall system performance
2. Burning CDs from the Finder
3. Improved graphics and printing

Service Applications and Protocols

1. Web services
2. File transfer
3. Email
4. Print services

TCP/IP Based Services

1. World wide web
2. File transfer
3. File sharing
4. Network administration

Evolution of Network Management

Networks are increasing in scale. Consequently there is a clear need for management functionality.

Network Management Requirements

1. Ease of use
2. Monitor response time
3. Security re-routing
4. User registration

Network Management Model

It consists of the organizational model, informational model, communicational model and functional model.

SNMP and CMIP Standards

SNMP (Simple Network Management Protocol) was added to the TCP/IP standards in 1989. CMIP is the other network management standard.

Components of the Organization Model

The network management station (NMS) is usually a standalone workstation, but it may be implemented over several systems.

Centralized Network Management Architecture

There should be a centralized database, with a central NMS and NMS queries.

Hierarchical Network Management Architecture

The hierarchical network management architecture consists of the NMS server, NMS client, NMS communication and local query.

Distributed Network Management Architecture

The distributed network management architecture consists of the peer NMS, NMS server, NMS client, NMS communication and local query.

Management Information Bases

1. MIB I
2. MIB II
3. Other standard MIBs

SNMP Protocol

Understanding the agent: the agent holds an information database, with object definitions provided in many management systems.

Management Protocols and Features

SNMP uses a community string match, and uses a user name string match for authentication.

Creation of User and Groups

The Syslog facility handles console messages and the NMS.

Creating Users and Groups

You create groups using the Active Directory Users and Computers console. Groups appear in two of the domain's containers: Built-in and Users.

1. The built-in groups cannot be deleted or made members of the other groups.
2. The built-in groups have certain important permissions already assigned to them. The other groups you create can be given membership in the built-in groups.
3. Similarly, if you want to disable a particular built-in group, you would do so simply by removing all its member groups.
4. Be careful changing the membership of the built-in groups. For most networks, while it is important to understand what these groups are and how they work, you generally want to leave them alone.
5. Generally, you work only with groups defined in the Users container. The default groups in the Users container can be distinguished from user accounts by both the two-person icon and the type designation.

To add a new group:

1. Select the Users container in the left pane.
2. Open the Action pull-down menu, choose New, and choose Group. You see the New Object - Group dialog box.
3. Enter the name of the group in the first field. You will see the name you enter echoed in the second field. This field enables you to specify a different group name for Windows NT (pre-Windows 2000) computers. However, using different group names is usually not a good idea, because it can quickly make your system confusing.
4. After naming the group, you can select from the available option buttons in the lower half of the dialog box.

The Group Scope section refers to how widely the group is populated throughout a domain:

1. Domain local groups exist only within a single domain and can contain members only from that domain.
2. Global groups can contain members only from the domain in which they exist. However, you can assign global group permissions to any domain within the network, even across multiple domains.
3. Universal groups exist throughout the organization, even when the organization's network is made up of many individual domains. Universal groups can also contain members from any domain in an organization's network.

Do not worry if you create a group with the wrong scope. You can easily change the scope of a group, provided its membership does not violate the new scope's rules for membership. To change the scope, select the group and open its Properties dialog box (right-click and then choose Properties from the pop-up menu). If the group membership allows the change, you can select a different Group Scope option button.

Maintaining Group Membership

A new group starts out without any members. To set the membership for a group follow these steps:

1. Select the group and open its Properties dialog box (by right-clicking it and choosing Properties from the pop-up menu).
2. Then click the Members tab.
3. Click the Add button to see the Select Users, Contacts, Computers, or Groups dialog box.
4. Type in enough of a user or another group's name to identify it, and then click the Check Names button. If you type in too few characters to uniquely identify the user or group, Windows will show you a list of the possible matches from which you can select the correct one.
5. Choose the member you want to add, and then click OK.
6. Repeat steps 4 and 5 to complete the group membership.

Setting Up a Network Printer

You can easily set up a printer connected to a server so other network users can access it as well. However, for networks with more than about 20 users, you are better off either buying printers with network interfaces and built-in print servers, or using dedicated print server boxes that interface between a printer and the network. For most laser printers, adding a dedicated network interface and server increases the cost of the printer. Also, printers with built-in print servers are far easier to relocate on the network. They can go anywhere a network connection exists and where power is available. Once connected to the network at a new location, the printer logs into the network and then starts doing its work immediately.

If you want to share a printer connected directly to a Windows Server 2008 server, this is easy to do.

1. First, open the server's Printers folder (from the Start menu, choose Control Panel, and then choose Printers), which lists all the installed printers.
2. Right click the one you want to share and choose Sharing from the pop-up menu. The Properties dialog box for the printer will appear, with the Sharing tab activated.
3. On the Sharing tab, assign the printer a share name by which the client computers will recognize the printer.
4. At this point, you can click the OK button because the default permissions for a shared printer are for the Everyone group to be able to print to it.

Printer Pooling

You might want to use a feature called printer pooling for high-throughput needs. It enables you to set up a number of identical printers, all connected to a single printer queue. They appear to the network as one printer. Users print to the listed printer, and the first available real printer services the job. Using printer pooling, a whole bank of printers appears as one printer to the users. This dramatically increases the number of print requests you can handle. Keep in mind that pooled printers must be identical, because they will all use the same print driver.

Printer Permissions

If you want to set other permissions for a shared printer, use the Security tab of the printer's Properties dialog box. The groups assigned in the Security tab are the default assignments for a shared printer, with Administrators permission shown. Three main permissions are assigned to each entity: Print, Manage Printers and Manage Documents. The Everyone group has permission to print, but not to manage documents in the queue. However, a special group called Creator Owner has permission to manage documents. This means that the user who sent the print job automatically has permission to modify or delete his own print job, but no other job waiting in the queue.

File Sharing

Network File Sharing

1. File service peers are (both) servers and clients.
2. Network file sharing employs Remote Procedure Calls (RPCs).
3. Network File Systems allow the user's files to "migrate" from workstation to workstation with them.
4. Network File Systems simplify life for the user, but generally make system administration more complicated (due to the setup costs).
5. In a lab exercise one can set up the Sun Network File System (NFS) services on the lab machines. NFS has two components: the server side software and the client side software. Each component is actually a suite of programs which implement the sockets required to provide network based file systems.
6. NFS is stateless.

Server side:

1. rpcbind (portmap).
2. mountd: responds to mount requests (sometimes called rpc.mountd). It relies on several files: /etc/dfs/dfstab, /etc/exports and /etc/netgroup.
3. nfsd: serves files; actually a call to kernel level code.
4. lockd: file locking daemon.
5. statd: manages locks for lockd.
6. rquotad: manages quotas for exported file systems.

Client side:

1. biod: client side caching daemon.
2. Mount must understand the hostname:directory convention.
3. Filesystem entries in /etc/[v]fstab tell the client what filesystems to mount.

The mount command has several extensions for use with NFS. Mount has to understand timeouts, soft mounts, background mounts and the auto mounter.

NFS Mount Options

OptionMeaning
rw / roRead/write and read only. NFS file systems that are mounted read/write can block activity on the client when the server providing the file system becomes unavailable.
hardMounts an NFS file system in such a way that it ensures data is written to the remote file system. If the file server becomes unavailable, a file system mounted with the hard option will stop all remote file operations until the file server becomes available again. All file systems mounted with the rw option should also use the hard option to ensure the integrity of data.
softDoes not provide assurance of data writes to the remote file system, but does not stop remote file operations in the case of a file server becoming unavailable. This option is useful for file systems that are mounted read-only.
suid / nosuidThe nosuid option negates the effect of programs on the remote file system for which respective setuid bits are set. Setuid programs run from NFS file systems mounted with the nosuid option are executed with the normal permissions of the user executing the program, not those conferred by the setuid bit. This option is used to increase the security of the client by preventing setuid programs on remote file systems from being used on the client system.
bg / fgThis option pair controls how to handle a failed mount of an NFS file system. Mounts with the bg option are retried in the background, freeing the shell which issued the mount command. Use this option when mounting file systems in /etc/vfstab or /etc/fstab to prevent a workstation from stopping during the boot sequence because a file server is down.
intr / nointrThe nointr option prevents program interrupts when programs cause an NFS operation to occur. This can result in programs being uninterruptible when an NFS file server becomes unavailable. The default is to allow interrupts, so that programs can be aborted in the event of server failures.
retry=nNumber of times to retry a failed mount. The default of 10,000 is usually sufficient.
timeo=nTime-out value for retrying NFS operations. Increase this value to permit very slow systems, such as near-line file stores, more time to complete basic operations.
retrans=nNumber of retransmissions of a given NFS operation. The setting depends on the network and type of server being used. Some networks where packet loss is high benefit from an increase in the number of retransmissions.
rsize=nRead buffer size. Some servers and clients perform better when the buffer used for NFS operations is a different size than the default (e.g., those with slower or less dependable network connections).
wsize=nWrite buffer size. Similar to rsize in usage.
proto=?Controls the network protocol used to transport NFS data. NFS uses IP datagrams by default. By setting proto=tcp, NFS will use TCP, thereby improving performance when moving data over wide area networks and the Internet.
secureOn Solaris 7 and early versions of NFS this option enables NIS+ public key cryptography, to be used for NFS authentication and encrypted communications. This option has been deprecated in favor of the "sec=?" option below.
sec=?New in Solaris 8. This option replaces the "secure" option of previous versions. It controls the security mode used for NFS. Options are "sys" for UID and GID based control, "dh" (Diffie-Hellman) for NIS+ based public key cryptography, "kerb4" for MIT Kerberos authentication and "none", which provides no authentication and maps all accesses to "nobody".
quota / noquotaSetting this option enables disk quota checking via the rquota service. The rquotad daemon must be running on the server for this to function. Noquota is the default.
remountThis option is often used when mounting a file system manually. It converts a mount point from read-only to read-write status.
vers=nNFS protocol version number (2 or 3). By default, the mount command will attempt to use the highest version number protocol available from the server. This option allows the protocol version to be fixed for use with servers that support only the older version 2 protocol.

NFS Security and Monitoring

NFS is NOT secure.

1. Keep /etc/dfs and /etc/exports locked up (root readable).
2. Use Fully Qualified Domain Names for hosts (FQDN).
3. Make sure you implement any security patches for NFS.
4. Make sure you get rid of "+" in any auto mount map files.

Monitoring NFS: the nfsstat command can be used to look at the NFS performance statistics. The -s flag looks at server statistics, and the -c flag looks at client side statistics.

File Sharing in Windows

Windows uses a different approach to file sharing. Server Message Block (SMB) is a proprietary protocol that was developed to support Windows networking. It uses ports 135 to 139: the NetBIOS name service uses ports 137 and 138, and the NetBIOS session service uses port 139. Now that Microsoft has embraced TCP/IP networking, Windows is converting to a new protocol: Common Internet File System (CIFS).

Permissions

1. Under NFS and AFS, the user (or administrator) can assign access permissions to directories, and to the files within those directories.
2. Under Windows, the permissions cover the directory. Files within a directory inherit the permissions of the directory.
3. Shared folder permissions only apply to the folder when it is accessed via the network. The local permissions pertain when accessing files locally on the server.
4. The default permission under Windows is "Everyone: Full Control". This means that everyone has access to all files in the shared folder.

Group Permissions

Domain: Administrator and Server Operator groups can share folders on any host in the domain. Power Users can share folders on a single host.

Workgroup: Administrators and Power Users can share folders. Users with the Create Permanent Shared Objects permission can create shares.

1. Network File Sharing relies on Remote Procedure Calls.
2. Network File Sharing is convenient for users.
3. Network File Sharing requires setup by the system administrator.
4. Network file sharing opens the door to many security problems.

Network Client Configuration

This client configuration instruction assumes that the network interface card (NIC) has already been installed. Then, it gets configured on the computer. Configuration means the proper installation of the latest driver for the NIC. NIC means Network Interface Card.

Accessing Network and Dial-Up Windows

Step 1: access the Network and Dial-Up Connections window. Under Network and disk connections, use right click on the connection, and likewise right click on the Network Dial-up connections.

Configuration of Components

The components are Client for Microsoft Networks, File and Print Sharing and the protocol (NetBEUI or TCP/IP).

1. Only one protocol need be configured for the client to connect to the network.
2. It is a good practice to have only one protocol active at any point in time unless the circumstances dictate otherwise.
3. When multiple protocols are active, the network access speed may slow down.

Protocols

NetBEUI is a non-routable protocol. TCP/IP is the routable protocol that is standard on the Internet.

Completing the Client Configuration

At this point, the client configuration is completed by pressing the OK button and restarting the computer if asked to do so. The client is now connected to a local network, where all the computers now function under the NetBEUI protocol.

NIC Configuration - Updating

If necessary, the NIC configuration could also be updated by pressing the Configure button. A wizard will help in the updating of the driver.

Driver Wizard

The first page is "Welcome to the upgrade device driver wizard." Click Next.

Checking the Resources

The resources used by the NIC can be checked: IRQ, I/O Address and Base Memory Address. This step is optional, as it is used here only for informational purposes.

Networking Components

1. Client: Client for Microsoft Networks.
2. Service: File and Print Sharing.
3. Protocol: TCP/IP; NetBEUI for internal local networks.

Client Options

The client options are Microsoft Networks and Novell NetWare.

Services Option

The services option is File and Print services.

Protocol Options

The protocol options are TCP/IP, NWLink, etc.

Installation of TCP/IP Protocol

Choose the TCP/IP protocol and click Install now.

Protocol Installation Good Practice

It is always a good practice to have only one protocol in operation, which in most cases would be the TCP/IP protocol. NetBEUI can be either unchecked or completely uninstalled.

Configuring the TCP/IP

Dynamic IP addresses: obtain properties from the DHCP server.
Static IP addresses: configure the properties manually.

To configure the properties either double-click on the protocol or click on the Properties button.

IP Properties

1. IP address of the client
2. Subnet mask
3. Gateway address
4. Primary DNS address
5. Secondary DNS address
6. WINS server addresses, if present

Configuring Dynamic IPs

Simply click the appropriate boxes in the TCP/IP properties windows to obtain the IP properties and the DNS address automatically.

Configuring the IP Addresses Manually

The following values must be obtained from the network administrator and configured:

1. IP address of the client
2. Subnet mask
3. Gateway address
4. Primary DNS address
5. Secondary DNS address
6. WINS server addresses, if present

Advanced TCP/IP Settings

1. IP
2. DNS
3. WINS
4. Options

Printer Sharing

A local printer is required before you share it on the network. To install a local printer, connect it with the system and check it in Printers and Faxes (Start > Settings > Printers and Faxes). If you do not see any printer here it means the system has not detected the printer yet, and you need to install it manually.

1. Click on Add a printer. This will launch the Add Printer Wizard. Click Next to see the Local or Network Printer screen.
2. Select the Local Printer radio button and select the Automatically Detect and Install My Plug and Play Printer check box, then click Next.
3. On the Select the Printer Port screen, click the Use the Following Port radio button and select LPT1:, i.e. you assume that the print device is attached to your computer using the parallel LPT1 port. Click Next.
4. Select the manufacturer and model of your printer. If you have a printer driver CD then use the Have Disk option. Click Next.
5. Give any name to your printer, for example OfficePrinter or LabPrinter, anything that is close to your specification, then click Next.
6. If you want to print a test page then choose Yes, otherwise select No, and click Next.
7. Click on Finish to complete the wizard.

Before sharing on the network it is best practice to test the printer. Do some printing. Sharing a printer is similar to sharing a folder.

1. Right-click on the printer and select Sharing. You will see the following dialog box.
2. Click on "If you understand the security risks but want to share printers without running the wizard, click here."
3. Select Share This Printer.
4. Provide a name for the shared printer and click OK. A sharing hand will appear under your printer.

Printer Priorities

It is possible to assign multiple printers to a single print device. With printer priorities, you can control the order in which print jobs are sent to the print device. With printer priorities, the printer with the highest priority will print first.

CBSE Computer Science Study Material: Networking in Computers

Essential Notes for Computer Science

Review targeted study resources for Networking in Computers tailored for learners. Utilizing these structured notes and quick-revision tools ensures complete alignment with current CBSE evaluation standards.

Verified Solutions for Computer Science

Designed around the official curriculum, these study guides guarantee standard compliance. Reviewing step-by-step solutions clarifies complex sub-topics within Networking in Computers and demystifies standard marking schemes for Computer Science evaluations.

Enhance Accuracy with Online Tests

Maximize your grade potential by utilizing Computer Science practice papers in tandem with these structured notes. All printable assignments and interactive mock tests on our platform are updated for the 2026 session and available free of charge.

FAQs

Where can I find the most advanced study material for [current-page:node:field_board] [current-page:node:field_class] Computer Science for 2026-27?

The latest 2026-27 advanced study resources for Computer Science are available for free on StudiesToday.com which includes NCERT Exemplars, high-order thinking skills (HOTS) questions, and deep-dive concept summaries.

What does the 2026-27 Computer Science study package for [current-page:node:field_class] include?

Our exhaustive Computer Science package includes chapter wise revision notes, solved practice sheets, important formulas and Concept Maps to help in better understanding of all topics.

Is this study material enough for both [current-page:node:field_board] exams and competitive tests?

Yes. For , our resources have been developed to help you get better marks in school exams and also build fundamental strength needed for entrance tests including Competency Based learning.

How should [current-page:node:field_class] students use this Computer Science material for maximum marks?

in , students should use Active Recall method, read the concept summary, then solve the Important Questions section without looking at the answers and then check your answers.

Can I download [current-page:node:field_class] Computer Science study notes in PDF for offline use?

All Computer Science study materials are provided in mobile-friendly PDF. You can download and save them on your device.

Are the [current-page:node:field_class] Computer Science resources updated for the latest NEP guidelines?

Yes, our team has ensured that all Computer Science materials for are strictly aligned with the National Education Policy (NEP) 2020 and the latest 2026-27 syllabus.