Official Study Materials for Computer Science
Explore structured advanced study materials through the ICT Resources Unit 03 Networking Concepts Notes Set 01. Tailored for learners, utilizing these Computer Science resources ensures thorough preparation and strengthens foundational knowledge before final evaluations.
Advanced Resources for Computer Science
View or download the dedicated ICT Resources Unit 03 Networking Concepts Notes Set 01 resource below. Engaging with these advanced study guides under focused conditions ensures continuous academic progress and mastery of the 2026-27 curriculum for Networking in Computers.
This page covers networking basics: what a network is, the LAN, MAN and WAN, and the characteristics, benefits and history of LANs. It goes on to topologies, networking cables, hubs, bridges, switches and routers, the OSI layers, and IP addressing.
Networking
A network is a group of systems. They are connected to allow sharing of resources such as files or printers, or sharing of services such as an Internet connection.
There are two aspects of setting up a network:
1. The hardware used to connect the systems together and the software installed on the computers.2. It allows them to communicate.
The network hardware is made up of two basic components:
1. The entities that want to share the information or resources, such as servers and workstations.2. The medium that enables the entities to communicate, which is a cable or a wireless medium.
There are many types of computer networks:
1. Home-area networks (HANs)2. Wide-area networks (WANs)
3. Campus-area networks (CANs)
4. Metropolitan-area networks (MANs)
Local Area Network (LAN)
A local area network (LAN) is a computer network that interconnects computers within a limited area such as a home, school, computer laboratory or office building using network media.
Typical Characteristics of a LAN Environment
1. The stations on the network are peers.2. Any station can initiate data exchange.
3. It can be done with any other station.
4. Full connectivity among all stations.
5. It is fully administered by the owner.
6. It runs over a shared transmission medium.
7. The medium may often be cabling.
8. The network is confined to a small area.
9. It may be within a single building or a cluster of buildings.
10. The data rate is high, several Mbps (million bits per second).
Purpose of a LAN
A LAN permits users to share resources: hardware, software or user-created files. Sharing of resources makes it possible to maximize the investments made in each resource. Ideally, distant resources should appear to be local to the user.
Objectives of an Effective LAN
When implemented, LANs are expected to achieve certain basic objectives:
1. To improve employee productivity.2. To improve information management.
Benefits of a LAN
Also when implemented, LANs are expected to achieve certain benefits:
1. To improve interaction between staff.2. To reduce/control costs.
3. It provides standardized hardware usage.
4. It also facilitates standardized software usage.
Fundamental Requirements of LAN
An effective LAN is one that meets objectives while fulfilling certain fundamental requirements. They are Simplicity and Dependability. An effective LAN enhances certain basic needs. They are Transparency and Manageability.
Fundamental Characteristics of a LAN
These characteristics are used to describe the architecture of a given LAN and allow comparisons among the many varied LAN environments.
1. Transmission medium: the type of cable or wireless system used to connect the network devices.2. Topology: it deals with the physical appearance of the LAN and also with the manner of operation over the particular transmission medium used to connect network devices.
3. Access control method: in a LAN environment, many devices share a common transmission medium, but generally only a few are able to use it at any given instant. Access control determines the way in which network devices are granted or denied access to the transmission medium.
4. Transmission technique: the manner in which the transmission medium is used for communications.
Evolution of LANs
A LAN is only one type of computer network. Before LANs came into being, there were other types of networks. The original messaging network, the telephone system, did not even involve computers. Computer networks came into prominence after the appearance of computers in the corporate world in the 1950's.
History of Computer Networking
1. Networks were geographically dispersed: university research mainframes were connected, for defense-related work in the United States during the 1950's.2. The first commercial mainframe was commissioned in the US.
3. 1964: a network was used for airline passenger information and reservations in the United States.
4. 1968: nationwide air-traffic control in the United States.
5. 1970's: the Advanced Research Projects Agency Network (ARPANET) connects computers from multiple vendors scattered across the United States.
6. 1980: Xerox, Digital Equipment Corp. and Intel announce the Ethernet standard for office networking.
The Minicomputer Environment
The 1970's saw the introduction of minicomputers (minis), essentially scaled-down versions of mainframes. Minis are generally less powerful than mainframes, supporting fewer terminals in simultaneous use.
The Lower Cost of Minis
1. Permitted smaller companies to afford their own computer.2. Allowed large companies to buy several low-cost minis as computing services became necessary for a given department or region.
Basic Elements
This unit covers Local Area Networking (LAN) and Metropolitan Area Networking (MAN).
Basic Elements of LAN
A LAN is made up of three basic elements:
1. The hardware which is connected to form the LAN.2. The software (or a program) which is accessed through the LAN.
3. The users, who create, work with and manage the various files.
LAN Hardware
A LAN can be thought of as a system composed of a series of building blocks. These blocks can be added and configured as needed. The hardware components found on a typical LAN include the following items:
1. Transmission channel: the medium which connects the network devices.2. Network Interface Cards (NICs) for attached devices.
3. Servers: file servers, print servers, communications servers.
4. Stations: local and remote.
5. Hubs and switches.
Transmission Media
The term transmission medium (or simply medium) is referred to as cabling. However, this is no longer an accurate description. In places where a physical cable connection is not feasible, devices can communicate using wireless systems, specialized radio or infrared equipment. The media are:
1. Twisted-pair cables: Unshielded twisted-pair (UTP) and Shielded twisted-pair (STP)2. Coaxial cables
3. Optical fiber cables
Wireless Systems
Wireless transmission media is used to connect network devices. Wireless systems do not physically connect network devices, since the links between the devices are invisible. They are either infrared light or radio links.
1. Infrared links: connecting devices using infrared light signals works essentially the same way that remote controls work with television sets.2. Radio links: this second type of wireless media uses radio waves to transmit information between the server and the stations.
Advantages: can be used in situations where it is difficult or impossible to install cable.
Disadvantages: typically, such systems are not able to meet the performance demands of large or busy networks, and transmission can only occur over limited distances.
Topologies
LAN topology is determined by how transmission channels are used to connect network devices. It is acknowledged that topology is the foundation of a LAN. First, topology refers to the physical appearance of the LAN; this is known as the physical topology. The second aspect refers to how the LAN functions; this logical topology is determined by how the messages are transmitted from device to device.
Bus Topology
When a message is sent on this topology, the following takes place:
1. The transmission signal leaves the sending device and travels along the cable in both directions.2. The device for which the message is intended will recognize the transmission and read the message as it passes by.
Bus Topology Advantages
1. It is easily adaptable to many environments.2. It can be configured to suit most situations.
3. It is easily expanded by adding devices at any point along the cable.
Ring Topology Advantage
1. When a message is sent, it travels from device to device around the circle. The sending device sends its message towards the destination device.2. There is no reliance on a central device; all messages pass through all devices.
3. Additional network devices can only be connected while the network is inoperative, since breaking the ring would cause network failure.
4. If any device fails, the entire network is affected.
Tree Topology
The tree topology is an extension of the bus topology. By adding cable extensions to the basic bus topology, a larger network can be achieved using less cable. Each additional cable extends from the underlying bus structure and supports multiple network devices along its length.
The Three Most Popular Types of LANs
1. Token ring network2. FDDI (Fiber Distributed Data Interface) network
3. Ethernet
Token Ring Network
1. Originally developed by IBM in the 1970's; still IBM's primary LAN technology.2. In cases of heavy traffic, the token ring network has higher throughput than Ethernet due to the deterministic (non-random) nature of the medium access.
3. It is used in applications in which the delay when sending data must be predictable.
4. It is a robust network, i.e. it is fault tolerant through fault management mechanisms.
FDDI (Fiber Distributed Data Interface)
FDDI is a standard developed by the American National Standards Institute (ANSI) for transmitting data on optical fibers. It supports transmission rates of up to 200 Mbps and uses a dual ring.
1. The first ring is used to carry data at 100 Mbps.2. The second ring is used as primary backup in case the first ring fails.
3. If no backup is needed, the second ring can also carry data, increasing the data rate up to 200 Mbps.
4. It supports up to 1000 nodes and has a range of up to 200 km.
Ethernet
1. First network to provide CSMA/CD.2. Developed in 1976 by Xerox PARC (Palo Alto Research Center) in cooperation with DEC and Intel; it is a fast and dependable network solution.
3. One of the most widely implemented LAN standards.
4. It can support data rates in the range of 10 Mbps to 10 Gbps. It is used with a bus or star topology.
Metropolitan Area Network (MAN)
A MAN is formed by the communication infrastructures that have been developed in and around large cities. It is commonly used in school campuses or large companies with multiple buildings. It is larger than a LAN, but smaller than a WAN. It is also used to mean the interconnection of several LANs by bridging them together. This sort of network is also referred to as a campus network.
Three major technologies are used to develop the MAN:
1. ATM (Asynchronous Transfer Mode)2. SMDS (Switched Multi-megabit Data Service)
3. FDDI (Fiber Distributed Data Interface)
Asynchronous Transfer Mode
Asynchronous Transfer Mode is a network technology based on transferring data in cells or packets of a fixed size. The cell used with ATM is relatively small compared to units used with older technologies. The small, constant cell size allows ATM equipment to transmit video, audio and computer data over the same network, and assure that no single type of data hogs the line.
FDDI Basic Principle
The token ring network like IEEE 802.5 and token: a special sequence of bits, the token, circulates around the ring. A station removes the token from the ring before transmission. After transmission, the station returns the token to the ring. Collisions are prevented as there is only one token in the ring.
Physical Properties
1. Dual-counter-rotating token ring architecture; one ring is primary and the other secondary.2. Up to 500 stations with a maximum distance of 2 km between any pair of stations for multimode fiber; with single-mode fiber the distance can be up to 40 km.
3. Maximum ring length is 100 km (total fiber length is 200 km for two rings).
4. Uses 4B/5B encoding.
FDDI Benefits
1. High bandwidth (10 times more than Ethernet).2. Larger distances between FDDI nodes because of very low attenuation (0.3 dB/km or less) in fibers.
3. Improved signal-to-noise ratio because of no interference from external radio frequencies and electromagnetic noise.
4. The BER typical of fiber-optic systems (10-11) is substantially better than that in copper (10-5) and microwave systems (10-7). It is very difficult to tap signals from a fiber cable.
Limitations of FDDI
1. High cost of optical components required for transmission/reception of signals, especially for single mode fiber networks.2. More complex to implement than existing low speed LAN technologies such as IEEE 802.3 and IEEE 802.5.
Applications of FDDI
1. Office automation at the desktop.2. Backbones for factory automation.
3. Backend data center applications.
4. Campus LAN interconnection.
5. Intercampus backbones or metropolitan area networks (MANs).
6. Interconnection of private branch exchanges (PBXs).
7. Workgroup and departmental LAN.
8. Integrated transport for multimedia applications.
Advantages of MAN
It connects all of your computers and servers together on the network and is typically very fast, like 100 Megabits per second (Mbps) or 1000 Mbps.
Applications of MAN
E-mail and surfing the Internet are some examples of MAN.
WAN - Wide Area Network
A WAN spans a large geographic area. It includes a state, province or country. WANs often connect multiple smaller networks such as local area networks (LANs) or metro area networks (MANs). It is a single network that connects different sites, and it operates at Layer 1 and Layer 2.
WAN Purposes
1. Internet access.2. Link sites within the same corporation.
3. Provide remote access to individuals who are off site.
WAN Characteristics
WANs are characterized by high cost and low speeds. There is a high cost per bit transmitted compared to LANs. Consequently, speeds are lower (most commonly 128 kbps to a few megabits per second). This speed usually is aggregate throughput shared by many users. It is much slower than LAN speeds (100 Mbps to 1 Gbps to the desktop).
Network Topologies
Three fundamental shapes are Bus, Ring and Star.
Bus Topology (Network Topologies)
1. A single cable connects all network nodes without intervening connectivity devices.2. Devices share responsibility for getting data from one point to another.
3. Terminators stop signals after reaching the end of the wire, and prevent signal bounce.
4. Inexpensive, not very scalable.
5. Difficult to troubleshoot, not fault-tolerant.
Advantages of Bus Topologies
1. Works well for small networks.2. Relatively inexpensive to implement.
3. Easy to add to it.
Disadvantages of Bus Topologies
1. Management costs can be high.2. Potential for congestion with network traffic.
Ring Topology (Network Topologies)
Each node is connected to the two nearest nodes, so that the entire network forms a circle. One method for passing data on ring networks is token passing.
Active Topology
Each workstation transmits data.
Advantages of Ring Topologies
1. Easier to manage; easier to locate a defective node or cable problem.2. Well-suited for transmitting signals over long distances on a LAN.
3. Handles high-volume network traffic.
4. Enables dependable communication.
Disadvantages of Ring Topologies
1. Expensive.2. Requires more cable and network equipment at the start.
3. Not used as widely as bus topology: fewer equipment options, and fewer options for expansion to high-speed communication.
Definition of Star Topology
In a star topology, every node on the network is connected through a central device.
Star Topology
1. Any single cable connects only two devices, so cabling problems affect two nodes at most.2. Requires more cabling than ring or bus networks, but is more fault-tolerant.
3. Easily moved, isolated, or interconnected with other networks; scalable.
4. Supports a maximum of 1024 addressable nodes on a logical network.
Advantages of Star Topologies
1. Good option for modern networks.2. Low startup costs.
3. Easy to manage.
4. Offers opportunities for expansion.
5. Most popular topology in use; wide variety of equipment available.
Disadvantages of Star Topologies
1. Hub is a single point of failure.2. Requires more cable than the bus.
Networking Cables
Networking cables are used in many ways. They connect one network device to other network devices. A networking cable also connects two or more computers, for example to share a printer or a scanner.
As noted earlier, the term transmission medium (or simply medium) is referred to as cabling. Where a physical cable connection is not feasible, devices can communicate using wireless systems, specialized radio or infrared equipment. The cable types are twisted-pair (unshielded twisted-pair, UTP, and shielded twisted-pair, STP), coaxial cables and optical fiber cables.
Coaxial Cable
Coaxial cable is called "coaxial" because it includes one physical channel that carries the signal, surrounded (after a layer of insulation) by another concentric physical channel, both running along the same axis. The outer channel serves as a ground. Many of these cables or pairs of coaxial tubes can be placed in a single outer sheathing and, with repeaters, can carry information for a great distance.
Coaxial cable is sometimes used by telephone companies from their central office to the telephone poles near users. It is also widely installed for use in business and corporation Ethernet and other types of local area network. Some factors determine the carrier's technology, and therefore twisted pair copper wire and optical fiber may be used instead of coaxial cable.
Coaxial Cable Invention
Coaxial cable was invented in 1880 by the English engineer and mathematician Oliver Heaviside, who patented the invention and designed it in that same year. AT&T established its first cross-continental coaxial transmission system in 1940.
Unshielded Twisted Pair
Unshielded twisted pair is the most common kind of copper telephone wiring. Twisted pair is the ordinary copper wire that connects homes and many business computers to the telephone company. To reduce crosstalk or electromagnetic induction between pairs of wires, two insulated copper wires are twisted around each other. Each signal on twisted pair requires both wires.
Since some telephone sets or desktop locations require multiple connections, twisted pair is sometimes installed in two or more pairs, all within a single cable. For some business locations, twisted pair is enclosed in a shield that functions as a ground. This is known as shielded twisted pair (STP). It is a side-by-side wire known as silver satin. The wall jack can have as many as five kinds of hole arrangements or pinouts, depending on the kinds of wire the installation expects will be plugged in (for example, digital, analog or LAN).
Fiber Optic Cable
A fiber optic cable consists of a bundle of glass threads, each of which is capable of transmitting messages modulated onto light waves.
Advantages of Fiber Optic Cable
Fiber optics has several advantages over traditional metal communications lines:
1. Fiber optic cables have a much greater bandwidth than metal cables. This means that they can carry more data.2. Fiber optic cables are less susceptible than metal cables to interference.
3. Fiber optic cables are much thinner and lighter than metal wires.
4. Data can be transmitted digitally rather than analogically.
Making Connections of Cables
Tools required:
1. Cat5e cable2. RJ45 connectors
3. Cable stripper
4. Scissors
5. Crimping tool
Steps for Making Connection
1. Strip cable end2. Untwist wire ends
3. Arrange wires
4. Trim wires to size
5. Attach connector
6. Check
7. Crimp
8. Test
Internet Working Devices
This section covers hubs, bridges, switches and routers.
Why Interconnect?
1. To separate / connect one corporate division with another.2. To connect two LANs with different protocols.
3. To connect a LAN to the Internet.
4. To break a LAN into segments to relieve traffic congestion.
5. To provide a security wall between two different types of users.
6. To connect WLAN to LAN.
Introduction
Many times it is necessary to connect a LAN to another LAN or to a WAN. Computers within a LAN are often connected using a hub. LAN to LAN connections are often performed with a bridge. Segments of a LAN are usually connected using a switch. LAN to WAN connections are usually performed with a router.
Hubs
A hub interconnects two or more workstations into a local area network. When a workstation transmits to a hub, the hub immediately resends the data frame to all connecting links. Hubs expand one Ethernet connection into many. For example, a four-port hub connects up to four machines.
Bridge
A bridge connects networks. It also forwards frames: the frames are moved from one network to another.
Selective Forwarding
For example, if A sends a frame to E, the frame must be forwarded by the bridge. If A sends a frame to B, there is no reason to forward the frame.
Bridge Database
The bridge needs a database that contains information about which hosts are on which network. The realistic options are:
1. The system administrator can create and maintain the database.2. The bridge can acquire the database on the fly.
Transparent Bridges
A transparent bridge does not need programming, but observes all traffic and builds routing tables from this observation. This observation is called backward learning. Each bridge has two connections (ports), and there is a routing table associated with each port. A bridge observes each frame that arrives at a port, extracts the source address from the frame and places that address in the port's routing table. A transparent bridge is found with CSMA/CD LANs.
Source-routing Bridges
A source-routing bridge is found with token ring networks. Source-routing bridges do not learn by watching tables. When a workstation wants to send a frame, it must know the exact path of network / bridge. If a workstation does not know the exact path, it sends out a discovery frame. The discovery frame makes its way to the final destination, then as it returns, it records the path.
Remote Bridges
A remote bridge is capable of passing a data frame from one local area network to another when the two LANs are separated by a long distance, with a wide area network connecting the two LANs. A remote bridge takes the frame before it leaves the first LAN and encapsulates the WAN headers and trailers. When the packet arrives at the destination remote bridge, that bridge removes the WAN headers and trailers, leaving the original frame.
Switches
A switch is a combination of a hub and a bridge. It can interconnect two or more workstations, but like a bridge, it observes traffic flow and learns. When a frame arrives at a switch, the switch examines the destination address and forwards the frame out the one necessary connection.
1. Major role: isolating traffic patterns and providing multiple access. This design is usually done by the network manager.2. Switches are easy to install and have components that are hot-swappable.
3. The backplane of a switch is fast enough to support multiple data transfers at one time.
4. Multiple workstations connected to a switch use dedicated segments. This is a very efficient way to isolate heavy users from the network.
Full Duplex Switches
A full duplex switch allows for simultaneous transmission and reception of data to and from a workstation. This full duplex connection helps to eliminate collisions. To support a full duplex connection to a switch, two sets of wires are necessary: one for the receive operation and one for the transmit operation.
Network Servers
Network servers provide the storage necessary for LAN software. They are usually the focal point for the network operating system. Increasingly, network servers are functioning as bridges, switches and routers. By adding the appropriate card, a server can assume multiple functions.
Routers
A router is the device that connects a LAN to a WAN or a WAN to a WAN (the Internet uses IP addresses). A router accepts an outgoing packet, removes any LAN headers and trailers, and encapsulates the necessary WAN headers and trailers. Because a router has to make wide area network routing decisions, it has to dig down into the network layer of the packet to retrieve the network destination address. Thus, routers are often called "layer 3 devices"; they operate at the third layer, the OSI network layer of the packet. Routers often incorporate firewall functions.
Connections in General
The following connections are possible by routers:
1. They act as bridges for LANs and hubs.2. They act as switches for LANs and workstations.
3. They act as routers for LANs and WANs (the Internet).
Bridges vs. Routers
Bridge: a bridge is a device that connects two segments of the same network. The two networks being connected can be alike or dissimilar. Bridges are protocol-independent. They simply forward packets, without analyzing and re-routing messages.
Router: a router is a device that connects two distinct networks. Routers are similar to bridges, but provide additional functionality, such as the ability to filter messages and forward them to different places based on various criteria. The Internet uses routers extensively; they forward packets from one host to another.
Switches vs. Routers
Switches: switches are considered layer-two devices, using MAC addresses to forward frames to their proper destination.
Routers: routers, layer-three devices, are much more complex, using microprocessor-based circuitry to route packets between networks based on their IP address.
Finally, switches are used within networks to forward local traffic intelligently. Routers are used between networks to route packets between networks in the most efficient manner.
Wi-Fi Router
A Wi-Fi router is a device that performs the functions of a router but also includes the functions of a wireless access point. It is commonly used to provide access to the Internet or a computer network. It does not require a wired link, as the connection is made wirelessly, via radio waves.
Characteristics of Wireless Routers
1. One or multiple NICs supporting Fast Ethernet; it also supports Gigabit Ethernet integrated into the main SoC.2. One or multiple WNICs supporting a part of the IEEE 802.11 standard family. They are integrated into the main SoC or are separate chips on the printed circuit board; it also can be a distinct card connected over a MiniPCI or MiniPCIe interface.
3. Some wireless routers come with an xDSL modem, DOCSIS modem, LTE modem or fiber optic modem integrated.
4. IEEE 802.11n compliant or ready.
5. Some dual-band wireless routers operate the 2.4 GHz and 5 GHz bands simultaneously.
6. Some high end dual-band wireless routers have data transfer rates of at most 300 Mbit/s (for the 2.4 GHz band) and 450 Mbit/s (for the 5 GHz band).
Communications Protocol
In the field of telecommunication, a communications protocol is the set of standard rules for data representation, signaling, authentication and error detection required to send information over a communications channel. For example, a simple communications protocol adapted to voice communication is the case of a radio dispatcher talking to mobile stations.
Introduction to TCP/IP Networking
1. IP: Internet Protocol2. UDP: User Datagram Protocol
3. RTP, traceroute
4. TCP: Transmission Control Protocol
5. HTTP, FTP, SSH
Introduction to ISO Network Model
The model has seven network "layers":
| Layer | Name | Example |
|---|---|---|
| Layer 1 | Physical | Cables |
| Layer 2 | Data Link | Ethernet |
| Layer 3 | Network | IP |
| Layer 4 | Transport | TCP/UDP |
| Layer 5 | Session | |
| Layer 6 | Presentation | |
| Layer 7 | Application |
Application Layer
The application layer is the OSI layer closest to the end user. It means that both the OSI application layer and the user interact directly with the software application. This layer interacts with software applications; such application programs fall outside the scope of the OSI model. Some examples include Telnet, File Transfer Protocol (FTP), Simple Mail Transfer Protocol (SMTP), DNS and Web/HTTP.
Presentation Layer
The presentation layer provides a variety of coding and conversion functions that are applied to application layer data. These functions ensure that information sent from the application layer of one system would be readable by the application layer of another system. Some examples of presentation layer coding and conversion schemes include common data representation formats, the conversion of character representation formats, common data compression schemes and common data encryption schemes.
Session Layer
The session layer implementation of the OSI protocol suite consists of a session protocol and a session service. The session protocol allows session-service users (SS-users) to communicate with the session service. An SS-user is an entity that requests the services of the session layer.
Session Service Provides Four Basic Services to SS-users
1. Establishes and terminates connections between SS-users and synchronizes the data exchange between them.2. Performs various negotiations for the use of session layer tokens, which the SS-user must possess to begin communicating.
3. Inserts synchronization points in transmitted data that allow the session to be recovered in the event of errors or interruptions.
4. Enables SS-users to interrupt a session and resume it later at a specific point.
Introduction to Transport Layer
The OSI protocol suite implements two types of services at the transport layer: connection-oriented transport service and connectionless transport service. Five connection-oriented transport layer protocols exist in the OSI suite, ranging from Transport Protocol Class 0 through Transport Protocol Class 4. Connectionless transport service is supported only by Transport Protocol Class 4.
Transport Layer Classes
1. Transport Protocol Class 0 (TP0) is the simplest OSI transport protocol. It performs segmentation and reassembly functions. TP0 requires connection-oriented network service.2. Transport Protocol Class 1 (TP1) performs segmentation and reassembly. It offers basic error recovery. TP1 sequences protocol data units (PDUs). TP1 requires connection-oriented network service.
3. Transport Protocol Class 2 (TP2) performs segmentation and reassembly, as well as multiplexing and demultiplexing of data streams over a single virtual circuit. TP2 requires connection-oriented network service.
4. Transport Protocol Class 3 (TP3) offers basic error recovery and performs segmentation and reassembly, in addition to multiplexing and demultiplexing of data streams over a single virtual circuit. TP3 also sequences PDUs and retransmits them or reinitiates the connection if an excessive number are unacknowledged. TP3 requires connection-oriented network service.
Transport Protocol Class 4
Transport Protocol Class 4 (TP4) offers basic error recovery and performs segmentation and reassembly. It also supplies multiplexing and demultiplexing of data streams over a single virtual circuit. TP4 sequences PDUs and retransmits them or reinitiates the connection if an excessive number are unacknowledged. TP4 provides dependable transport service and functions with either connection-oriented or connectionless network service. It is based on the Transmission Control Protocol (TCP) in the Internet Protocols suite and is the only OSI protocol class that supports connectionless network service.
Network Layer
The network layer provides the functional and procedural means by which it can transfer variable length data sequences from a source to a destination via one or more networks, while maintaining the quality of service requested by the transport layer.
Performance of Network Layer
The network layer performs network routing, flow control, network segmentation/desegmentation and error control functions. Its protocols include IP (IPv4, IPv6), ARP, RARP, ICMP, IGMP, RSVP and IPSec.
1. A datagram network provides network-layer connectionless service.2. A VC network provides network-layer connection service analogous to the transport-layer services, but the service is host-to-host, there is no choice (the network provides one or the other), and the implementation is in the network core.
Introduction to Data Link
The data link layer provides dependable transit of data across a physical network link. Different data link layer specifications define different network and protocol characteristics, including physical addressing and network topology. Network topology consists of the data link layer specifications that often define how devices are to be physically connected, such as in a bus or a ring topology. Error notification alerts upper-layer protocols that a transmission error has occurred.
Physical Layer
The physical layer defines the electrical, mechanical, procedural and functional specifications for activating, maintaining and deactivating the physical link between communicating network systems. Physical layer specifications define characteristics such as voltage levels, timing of voltage changes and physical data rates. It also defines maximum transmission distances and physical connectors.
Internet Protocol (IP) Address
Introduction
An IP address is an identifier for a computer. It can also find a device on a TCP/IP network. Networks using the TCP/IP protocol route messages based on the IP address of the destination.
(IP) Address
To view your IP address you can use the ipconfig command line tool. Ipconfig displays all current TCP/IP network configuration values. It also refreshes Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) settings.
The Format of an IP Address
The format of an IP address is a 32-bit numeric address. It is written as four numbers separated by periods. Each number can be zero to 255. For example, 1.160.10.240 could be an IP address. Within an isolated network, you can assign IP addresses at random as long as each one is unique. However, connecting a private network to the Internet requires using registered IP addresses (called Internet addresses) to avoid duplicates.
Static and Dynamic IP Address
An IP address can be static or dynamic. A static IP address will never change; it is a permanent Internet address. A dynamic IP address is a temporary address. It is assigned each time a computer or device accesses the Internet.
Classes of an IP Address
The four numbers in an IP address are used in different ways to identify a particular network and a host on that network. Four regional Internet registries (ARIN, RIPE NCC, LACNIC and APNIC) assign Internet addresses from the following three classes:
| Class | Support |
|---|---|
| Class A | 16 million hosts on each of 126 networks |
| Class B | 65,000 hosts on each of 16,000 networks |
| Class C | 254 hosts on each of 2 million networks |
The number of unassigned Internet addresses is running out, so a new classless scheme called CIDR is gradually replacing the system based on classes A, B and C. It is tied to adoption of IPv6. In IPv6 the IP address size is increased from 32 bits to 128 bits.
Free study material for Computer Science
Free CBSE Study Guides: Computer Science Networking in Computers
Essential Notes for Computer Science
Review targeted study resources for Networking in Computers tailored for learners. Utilizing these structured notes and quick-revision tools ensures complete alignment with current CBSE evaluation standards.
Verified Solutions for Computer Science
Each resource draws directly from authorized textbooks to maintain academic accuracy. Evaluating solved examples allows students to master the formal presentation and answer-writing standards expected in upcoming school exams.
Enhance Accuracy with Online Tests
For peak performance in upcoming evaluations, integrate official Computer Science sample papers directly into your study schedule. Follow up your revision by attempting online MCQ tests for Networking in Computers to refine calculation speed and precision.
FAQs
The latest 2026-27 advanced study resources for Computer Science are available for free on StudiesToday.com which includes NCERT Exemplars, high-order thinking skills (HOTS) questions, and deep-dive concept summaries.
Our exhaustive Computer Science package includes chapter wise revision notes, solved practice sheets, important formulas and Concept Maps to help in better understanding of all topics.
Yes. For , our resources have been developed to help you get better marks in school exams and also build fundamental strength needed for entrance tests including Competency Based learning.
in , students should use Active Recall method, read the concept summary, then solve the Important Questions section without looking at the answers and then check your answers.
All Computer Science study materials are provided in mobile-friendly PDF. You can download and save them on your device.
Yes, our team has ensured that all Computer Science materials for are strictly aligned with the National Education Policy (NEP) 2020 and the latest 2026-27 syllabus.