SB Mathur Physics Solutions Chapter 2 Multiple Choice Questions Type 2 Part 3

Step-by-Step SB Mathur Solutions for JEE Physics Chapter 02 Multiple Choice Questions Type 2

Review structured textbook solutions for JEE Physics Chapter 02 Multiple Choice Questions Type 2 prepared by SB Mathur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Download Chapter 02 Multiple Choice Questions Type 2 Textbook Solutions PDF

View or download the dedicated Chapter 02 Multiple Choice Questions Type 2 solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

Chapter 2 Multiple Choice Questions Type 2 - Part 3

2.2 Heat and Thermodynamics

Question 2.2.5. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The system has three components in series (A, the parallel block B, C, D, and E), with thermal resistances RA = L/(8KA), RB = 4L/(3KA), RC = 4L/(8KA), RD = 4L/(5KA) and RE = L/(24KA). Since A and E are in series, thermal current through them is the same. Temperature differences: ΔθA = HRA = HL/(8KA), ΔθB = (3H/16)RB = HL/(4KA), ΔθC = (H/2)RC = HL/(4KA), ΔθD = (5H/16)RD = HL/(4KA) and ΔθE = HRE = HL/(24KA). So ΔθE is the smallest. Now IC = ΔθC/RC = H/2, IB = ΔθB/RB = 3H/16 and ID = ΔθD/RD = 5H/16, so IC = IB + ID. Hence, the correct options are (a), (c) and (d).

Teacher's Note: Parallel branches share the same temperature difference; currents add. Compute each ΔT = I·R.

Exam Note: Series: same current; parallel: same ΔT.

Question 2.2.6. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Sunrays falling on the black body lead to more absorption of radiation. Since the temperature remains constant, it emits more radiation. Sunlight is white light, which comprises the visible spectrum (red to violet), hence it radiates more energy in the visible spectrum. Hence, the correct options are (b), (c) and (d).

Teacher's Note: At constant temperature, emission must equal absorption; a black body absorbs all wavelengths it receives.

Exam Note: Constant temperature means emitted equals absorbed.

Question 2.2.7. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution.

GasCVCPCP − CVCP + CVCP/CVCP × CV
Monatomic3R/25R/2R4R5/3(15/4)R2
Diatomic5R/27R/2R6R7/5(35/4)R2
So, options (b) and (d) are true.

Teacher's Note: Mayer relation CP − CV = R holds for both gases; degrees of freedom set CV.

Exam Note: Memorise 3R/2, 5R/2 and γ values.

Question 2.2.8. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The process A → B is a part of a semicircle, so it cannot be isothermal. For a process to be isothermal, the path should be a rectangular hyperbola. In the process B → C → D, the gas undergoes compression. The work done by the gas is negative (ΔW < 0), hence heat is expelled (flows out). The work done during the process A → B → C is the area enclosed by the semicircle (∫ p dV), which is not zero. For the clockwise process A → B → C → D → A, the work done by the gas is positive. Hence, the correct options are (b) and (d).

Teacher's Note: Isotherm on p–V is a hyperbola; clockwise cycle gives positive net work.

Exam Note: Clockwise loop: positive work by gas.

2.3 Sound Waves

Question 2.3.1. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Comparing the given equation with the equation of a standing wave, y(x, t) = A sin(2π/λ)x cos(ωt), we have A = 0.01 m. 2π/λ = 62.8 m−1 = 20π m−1, or λ/2 = 1/20 m = 5 cm. ∴ length of the string, L = 5λ/2 = 25 cm = 0.25 m. Angular frequency of this mode, ω = 628 s−1, 2πν = 200π s−1. ∴ fundamental frequency = ν/5 = 100/5 Hz = 20 Hz. Hence, the correct options are (b) and (c).

Teacher's Note: Read A, k and ω off the standing-wave form; loops give L = n·λ/2.

Exam Note: Fundamental = mode frequency divided by loop count.

Question 2.3.2. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Beat frequency: (i) when the observer is at P, νP = (121 − 118)(V + V0cos α)/V Hz = 3[(V + V0cos α)/V] Hz. (ii) When the observer is at Q, νQ = 121 − 118 = 3 Hz. (iii) When the observer is at R, νR = (121 − 118)(V − V0cos α)/V Hz = 3[(V − V0cos α)/V] Hz ⇒ νP + νR = 2νQ. At any position (θ), the beat frequency ν(θ) = 3[(V + V0cos θ)/V] Hz ⇒ dν/dθ = −3(V0/V) sin θ. At Q, sin θ = sin 90° = 1 (maximum). ∴ the rate of change of beat frequency with time is maximum at Q. Hence, the correct options are (a), (c) and (d).

Teacher's Note: Only the radial velocity component Doppler-shifts the frequency; at Q it is zero but changing fastest.

Exam Note: Rate of change peaks where cos θ varies fastest.

Question 2.3.3. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Expressions for apparent frequency are f2 = [(v + w + u)/(v + w − u)] f1 for wind blowing from the source to the observer, and f2 = [(v − w + u)/(v − w − u)] f1 for wind blowing from the observer to the source. ⇒ f2 > f1 in both the cases. Hence, the correct options are (a) and (b).

Teacher's Note: Wind changes the medium speed to v ± w; approach of the source still raises frequency.

Exam Note: Wind alters speed only, not direction of shift.

Question 2.3.4. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. v = √(F/μ). Speed is same at any point for both the pulses, hence TAO = TOA. ∵ v = fλ, so λ ∝ v. At A, tension F decreases, so v decreases ⇒ λ decreases, so option (c) is incorrect. v depends on F and μ and is independent of f and λ. Hence, the correct options are (a), (b) and (d).

Teacher's Note: Speed depends on tension and linear density only; frequency stays fixed, so λ ∝ v.

Exam Note: Wave speed independent of frequency in a string.

Question 2.3.5. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. For possible modes of vibration in standing waves, l = (2n + 1)λ/4 ⇒ λ = 12/(2n + 1) m. k = 2π/λ = (2n + 1)π/6 and ω = vk = (2n + 1)50π/3. For n = 0, k = π/6 and ω = 50π/3. For n = 2, k = 5π/6 and ω = 250π/3. For n = 7, k = 5π/2 and ω = 250π. Hence, the correct options are (a), (c) and (d).

Teacher's Note: Node–antinode ends allow only odd multiples of λ/4; substitute n to get k and ω.

Exam Note: Odd harmonics only for closed-open systems.

Question 2.3.6. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. v = √(γp/ρ) = √(γRT/M), also ν = v/λ = v/4l ⇒ l = (1/4ν)√(γRT/M). From the above equation the values of l for gases mentioned in the options (a), (b), (c) and (d) are found to be 0.459 m, 0.363 m, 0.340 m and 0.348 m respectively. As l = (0.350 ± 0.005) m, the correct option is (d).

Teacher's Note: Closed pipe fundamental has l = λ/4; compare computed lengths within the tolerance.

Exam Note: Check each option against the given tolerance.

Question 2.3.7. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. When reflection of a sound wave occurs at a rigid boundary (like the closed end of a pipe), the particles at the boundary are unable to vibrate. The reflected wave thus generated interferes with the incident wave to produce zero displacement (or node). At this displacement node exists the pressure antinode. Thus reflected pressure wave has the same phase as the incident wave and a high pressure compression pulse gets reflected as a compression pulse. Similarly, for reflection from the open end of the pipe, the particles vibrate with increased amplitude (displacement antinode) and pressure remains at the average value (pressure node). The reflected pressure wave interferes destructively with the incident wave so that a phase change of π occurs from the open end. Thus, a high pressure compression pulse reflects as a low pressure rarefaction pulse. Hence, the correct options are (b) and (d).

Teacher's Note: Displacement node means pressure antinode; closed end keeps pressure phase, open end flips it.

Exam Note: Closed end: compression stays compression.

Question 2.3.8. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. X = A sin2αx + B cos2αx + C sin αx cos αx = (A/2)(1 − cos 2αx) + (B/2)(1 + cos 2αx) + (C/2) sin 2αx = ½(A + B) − ½(A cos 2αx − B cos 2αx) + (C/2) sin 2αx. For A = −B, C = 2B, X = B cos 2αx + B sin 2αx. This represents SHM with amplitude √2 B. For A = B, C = 0, we get X = A. The motion is not SHM. For A = B, C = 2B, X = B + B sin 2αx. This represents SHM with displaced origin and amplitude = B. For any value of A, B and C (except C = 0), X = ½(A + B) + ½(B − A) cos 2αx + (C/2) sin 2αx. This represents SHM. Hence, the correct options are (a), (b) and (d).

Teacher's Note: Reduce to a constant plus sinusoids of 2αx; constant means no oscillation.

Exam Note: Rewrite using double-angle identities first.

Question 2.3.9. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The first resonance is more intense than the second resonance. The prongs are kept vertically (not horizontally) to produce longitudinal vibration in the air column. For the first resonance, l1 + E = λ/4, where E = end correction. So l1 is slightly shorter than λ/4. Hence, the correct options are (a) and (d).

Teacher's Note: End correction makes the first resonating length slightly shorter than λ/4.

Exam Note: State l + e = λ/4 for first resonance.

2.4 Electrostatics

Question 2.4.1. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Q1 is positive, Q2 is negative. Also |Q1| > |Q2|. Lines of force start from a positive charge and end on a negative charge, and are denser near a larger charge. Hence, the correct options are (a) and (d).

Teacher's Note: Lines leave positive and enter negative charge; more lines mean larger magnitude.

Exam Note: Line density indicates charge magnitude.

Question 2.4.2. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. k QA/RA = k QB/RB = k·2Q/(RA + RB) = common potential V ⇒ QA/QB = RA/RB > 1. ∴ QA > QB. σARA2/(σBRB2) = RA/RB ⇒ σA/σB = RB/RA. The field in the cavity of the metallic shell is zero. On the surface, EA/EB = (QA/QB)(RB2/RA2) = (RA/RB)(RB2/RA2) = RB/RA < 1 ⇒ EA < EB. Hence, the correct options are (a), (b), (c) and (d).

Teacher's Note: Connected conductors share potential, so charge ∝ radius and σ ∝ 1/radius.

Exam Note: Equal potential: Q ∝ R, σ ∝ 1/R.

Question 2.4.3. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. In △PC1C2, r2 = d + r1 (vectors). The electrostatic field in the overlapped region at any point P is E = k(4/3)πr23ρ/r22 r̂2 + k(4/3)πr13(−ρ)/r12 r̂1 = k(4/3)πρ(r2r̂2 − r1r̂1) = k(4/3)πρ(r2 − r1) = k(4/3)πρd = (1/4πε0)(4π/3)ρd = ρd/(3ε0) = constant and parallel. Hence, the correct options are (c) and (d).

Teacher's Note: Superposition of two uniform spheres leaves a uniform field ρd/(3ε₀) in the overlap.

Exam Note: Field in overlap: uniform, direction along d.

Question 2.4.4. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The position of all the charges are symmetric about the planes x = ± a/2, so the net electric flux through them will be the same. The same is true for the planes y = ± a/2. Hence φ = (1/ε0)Σqinside = (3q − q − q)/ε0 = q/ε0. By symmetry, flux through z = +a/2 is equal to flux through x = +a/2. Hence, the correct options are (a), (c) and (d).

Teacher's Note: Gauss law gives total flux; symmetry shows equal flux through equivalent faces.

Exam Note: Total flux = qinside/ε0; use symmetry.

Question 2.4.5. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. At point P1, (1/4πε0)·ρ1(4/3 πR3)/(4R2) = ρ2R/(3ε0) ⇒ ρ1/ρ2 = 4. At point P2, ρ1(4/3 πR3)/(2R)2 + ρ2(4/3 π×8R3)/(5R)2 = 0 ⇒ ρ1/ρ2 = −32/25. Hence, the correct options are (b) and (d).

Teacher's Note: Use field outside a sphere (Q/4πε₀r²) and inside (ρr/3ε₀) for each condition.

Exam Note: Set the net field to the required value.

Question 2.4.6. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Field at O is 6K, along OD. Line PR is the perpendicular bisector of all the dipoles, so V0 = 0. Hence, the correct options are (a), (b) and (c).

Teacher's Note: Equatorial line of a dipole is equipotential at zero potential.

Exam Note: Perpendicular bisector of a dipole: V = 0.

Question 2.4.7. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The displacement of +q towards +x direction produces a net restoring force towards −x direction and vice versa. Restoring force, F = q[2Kλ/(d − x) − 2Kλ/(d + x)] ≈ 4Kλq x/d2 ⇒ motion is SHM with T = 2π√(md2/(4Kλq)). In the second case, −q will move along the direction of displacement. Hence, the correct option is (c).

Teacher's Note: Expand for small x; linear restoring force means SHM, and a negative charge reverses the sign.

Exam Note: Small x: expand binomially to get F ∝ x.

Question 2.4.8. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Q/(4πε0r02) = λ/(2πε0r0) = σ/(2ε0) ⇒ Q = 2πσr02, r0 = λ/(πσ). E1(r0/2) = 4E1(r0). E1(r0/2) = 2E2(r0/2). E3(r0/2) = E3(r0) = E2(r0). Hence, the correct option is (c).

Teacher's Note: Point charge falls as 1/r², line as 1/r, sheet is independent of r.

Exam Note: Know field scaling for point, line and sheet.

Question 2.4.9. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The electric field at A (OA = r) due to the solid sphere, E1 = (1/4πε0)(4/3 πr3ρ) r̂/r2 = ρr/(3ε0). Similarly, the field at A due to cavity, E2 = (ρ/3ε0)(−PA) (−ve sign due to absence of charge) = (ρ/3ε0)AP. ⇒ net field at A, E = E1 + E2 = (ρ/3ε0)(OA + AP) = (ρ/3ε0)OP = (ρ/3ε0)a. Hence, the correct option is (d).

Teacher's Note: Cavity equals full sphere plus an opposite-charge sphere; the field becomes uniform.

Exam Note: Superpose full sphere and negative cavity sphere.

Question 2.4.10. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The electric flux linked with the hemisphere will be contained within the solid angle subtended by the flat surface at the position of the charge, which is Ω = 2π(1 − cos 45°) = 2π(1 − 1/√2). ⇒ flux through the curved surface, ψ = −(Q/ε0)(2π/4π)(1 − 1/√2) = −(Q/2ε0)(1 − 1/√2). All points at the circumference are at the same distance (√2 R) from the charge, so it is equipotential. Hence, the correct options are (a) and (d).

Teacher's Note: Flux through a surface equals (Q/ε₀) × (solid angle/4π).

Exam Note: Flux = (Q/ε₀)(Ω/4π).

Question 2.4.11. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. After closing the switch S1, C1 is charged by 2CV0. When S2 is closed, this charge is equally shared between C1 and C2 and both of their upper plates have charge CV0. When S3 is closed, the upper plate of C2 is charged by −CV0 and the lower plate, by +CV0. Hence, the correct options are (b) and (d).

Teacher's Note: Equal capacitors share charge equally on connecting; track plate charges each step.

Exam Note: Charge conserved on connecting capacitors.

Question 2.4.12. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Since both the parts have a common potential difference (V) and the same separation d, the ratio E1/E2 = 1 [∵ E = V/d]. Let C0 = capacitance of the whole air-capacitor (without dielectric): K C0/3 + 2C0/3 = C or C = ((K + 2)/3)C0. For the upper portion, C1 = K C0/3. ∴ C/C1 = (2 + K)/K. Hence, the correct options are (a) and (d).

Teacher's Note: Parts side by side are in parallel: same V, capacitances add.

Exam Note: Parallel portions: same potential difference.

Question 2.4.13. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The system comprises three capacitors whose capacitances are C1′ = ε1ε0(A/2)/(d/2) = 4ε0A/d = 4C1, C2′ = ε2ε0(A/2)/(d/2) = 2ε0A/d = 2C1 and C3′ = ε1ε0(A/2)/d = 2ε0A/2d = C1. Here C1′, C2′ are in series with C3′ in parallel with the combination. ∴ equivalent capacitance, C2 = C1′×C2′/(C1′ + C2′) + C3′ = (4/3 + 1)C1 = (7/3)C1. ∴ ratio C2/C1 = 7/3. Hence, the correct option is (d).

Teacher's Note: Reduce series pair first (4·2/6 = 4/3), then add the parallel capacitor.

Exam Note: Series: product over sum; parallel: add.

Question 2.4.14. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Electrostatic and gravitational static fields are both conservative and they never form closed loops. Hence, the correct options are (a) and (c).

Teacher's Note: Conservative fields have zero curl; field lines cannot close on themselves.

Exam Note: Static conservative field: no closed field lines.

Question 2.4.15. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The nature of the graph showing the variation of the potential φr with distance r corresponds to that due to a uniformly charged spherical conducting shell of radius R0. Inside the shell (r < R0), electric field E = 0, so the total electrostatic energy stored is zero. Total charge q will be on the surface of the shell (r = R0) and nowhere else. Within the concentric shell of radius r = 2R0, total charge contained is q. Electric field within the shell is zero and at the surface (r = R0), it suddenly changes to (1/4πε0)(q/R02), so there is discontinuity at r = R0. Hence, the correct options are (a), (b), (c) and (d).

Teacher's Note: Inside a conducting shell E = 0 and V is constant; field jumps at the surface.

Exam Note: Potential continuous, field discontinuous at the shell.

Question 2.4.16. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Coulomb force between Q and −q is radial, so the torque τ = r × F = rF sin 180° = 0. ∴ angular momentum (r × p) is conserved. The linear speed, linear momentum and angular velocity change with time. Hence, the correct option is (a).

Teacher's Note: Central force gives zero torque, so angular momentum is conserved while speed and momentum vary.

Exam Note: Central force: angular momentum conserved.

2.5 Current Electricity and Magnetism

Question 2.5.1. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. At the time of breaking up of the filament, the temperature becomes higher and according to Wien’s law λmax ∝ 1/T, so νm ∝ T, the filament emits more light at higher band frequencies. As the supply voltage remains constant, so consumed power P = V2/R. Since the resistance R increases with the rise in temperature, so the filament consumes less power towards the end of the life of the bulb. Hence, the correct options are (c) and (d).

Teacher's Note: Wien law links higher temperature to shorter wavelength; P = V²/R falls as R rises.

Exam Note: Constant V: larger R means lower power.

Question 2.5.2. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. By symmetry, P and Q as well as S and T are at the same potential, so resistance across them are ineffective because potential difference across them is zero. The simplified circuit is: Req = (6 × 12)/18 = 4 Ω. I1 = 12/4 = 3 A. I2 = [12/(6 + 12)] × 3 = 2 A. VA − VS = (2 A)(4 Ω) = 8 V. VA − VT = (1 A)(8 Ω) = 8 V. VP = VQ ⇒ current through PQ = 0. VP = VQ ⇒ VQ > VS. I2 = 3 A − 1 A = 2 A. Hence, the correct options are (a), (b), (c) and (d).

Teacher's Note: Equal-ratio branches make points equipotential, so no current flows across the bridge link.

Exam Note: Spot equipotential points to simplify the circuit.

Question 2.5.3. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Riron = ρl/A = (1.0 × 10−7 Ω m)(50 × 10−3 m)/(4 × 10−6 m2) = 1250 μΩ. Raluminium = ρl/A = (2.7 × 10−8 Ω m)(50 × 10−3 m)/((49 − 4) × 10−6 m2) = 30 μΩ. ⇒ equivalent resistance = R1R2/(R1 + R2) = (1250 × 30/1280) μΩ = (1875/64) μΩ. Hence, the correct option is (b). Corrected: the book prints these two resistances in Ω; the numbers work out in μΩ (e.g. 1.0×10−7 × 0.05 / 4×10−6 = 1.25×10−3 Ω), as written here.

Teacher's Note: Parallel resistances combine as product over sum; check powers of ten carefully.

Exam Note: Convert units before combining resistances.

Question 2.5.4. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. R1 = ρL/A = ρL/(πr2); R2 = ρL/(π4r2) = R1/4. Initially, H = (V2/R1)·4. When both the wires of resistance R2 are in series, H = V2t1/(2R2) = V2t1/(2(R1/4)) = 2V2t1/R1. ∴ 2t1 = 4 min, t1 = 2 min. When both the wires of resistance R2 are in parallel, the equivalent resistance = R2/2 = R1/8 ⇒ H = (V2/(R1/8))t2 = 8(V2/R1)t2. ∴ 8t2 = 4 min ⇒ t2 = 0.5 min. Hence, the correct options are (b) and (d).

Teacher's Note: Heat = V²t/R; double radius gives a quarter of the resistance.

Exam Note: Same heat: time inversely proportional to V²/R.

Question 2.5.5. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. When the key is closed at t = 0, voltage across each capacitor is zero, so reading of the voltmeter is −5 V. At t = ∞, the capacitors are fully charged, so the voltmeter reads +5 V. During the transient state, I1 = (5/50)e−t/τ mA, I2 = (5/25)e−t/τ mA and I = I1 + I2, where τ = RC = 1 s. After 1 s, current through the ammeter is 1/e times the initial value, and at t = ∞, it becomes zero. Reading of the voltmeter at any instant is VQ − VR = (VP − VR) − (VP − VQ) = ΔV50 kΩ − ΔV40 μF = 5e−t/τ − 5(1 − e−t/τ) = 5(2e−t/τ − 1). But t = ln 2 s and τ = 1 s, so e−t/τ = e−ln 2 = 1/2. ∴ voltmeter reads 0 V at t = ln 2 s. Hence, the correct options are (a), (b), (c) and (d).

Teacher's Note: RC charging: current decays as e^(−t/τ); both branches have τ = 1 s here.

Exam Note: Time constant τ = RC; currents fall to 1/e.

Question 2.5.6. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Let V0 = potential at O. According to junction rule: (V1 − V0)/R1 = (V0 − 0)/R2 + (V0 + V2)/R3 ⇒ V0 = (V1/R1 − V2/R3)/(1/R1 + 1/R2 + 1/R3). Current through R2 will be zero, if V0 = 0 so V1/V2 = R1/R3. This condition is satisfied by the options given (a), (b) and (d).

Teacher's Note: Zero current in R₂ means O is at 0 V; apply Kirchhoff junction rule.

Exam Note: Junction rule: currents in equal currents out.

Question 2.5.7. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Consider the situation shown in Figure (i), in which all the elements are connected in series. If Ig be the current through galvanometer for full-scale deflection (max range), the potential difference across AB is V1 = Ig(2Rg + 2R) = 2Ig(R + Rg). Again, consider the situation shown in Figure (ii). Ig flows through each galvanometer for full-scale deflection. ∴ voltage range, V2 = VA − VB = IgRg + 2Ig·2R = Ig(Rg + 4R). If 2Rg < R then V2 > V1. For maximum current range, all the components are to be connected in parallel. Hence, the correct options are (b) and (c).

Teacher's Note: Full-scale current I_g sets the limit; voltage range is I_g times the series resistance.

Exam Note: Voltage range: series; current range: parallel.

Question 2.5.8. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The magnetic field is nonzero in the region 0 < r < R as well as in the region r > 2R. Hence, the correct options are (a) and (d).

Teacher's Note: Ampere law: enclosed current gives nonzero B inside and outside the conductor.

Exam Note: Apply Ampere law to each radial region.

Question 2.5.9. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Effective length of the wire, l = 2(L + R)î and magnetic force, F = I(l × B) = 2I(L + R) î × B. If B = B k̂, F = 2I(L + R)B î × k̂ = 2I(L + R)B(−ĵ) ⇒ F ∝ (L + R). If B = B î, F = 2I(L + R)B(î × î) = 0. If B = B ĵ, F = 2I(L + R)B(î × ĵ) = 2I(L + R)B k̂ ⇒ F ∝ (L + R). If B = B k̂, F ≠ 0, so option (d) is incorrect. Hence, the correct options are (a), (b) and (c). (The book prints the last force as 2B(L × R)k̂, evidently a misprint for 2I(L + R)B k̂.)

Teacher's Note: Force on a bent wire equals that on the straight line joining its ends.

Exam Note: Use effective length vector for bent wires.

Question 2.5.10. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. For θ = 0, path of the charge is circular due to B field. In addition, it experiences force due to the electric field (qE0ĵ); it has an acceleration along the y-axis. So the resulting path will be helical with a variable pitch. With similar arguments, for θ = 10°, the path will be helical with the pitch increasing with time. For θ = 90°, FB = q(v × B) is zero but Fel = qE0: the motion is linear, accelerated along the y-axis. Hence, the correct options are (c) and (d).

Teacher's Note: E along B accelerates the charge along the axis while B turns it, giving growing pitch.

Exam Note: Parallel E and B: helix of increasing pitch.

Question 2.5.11. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. qvB = mv2/r, r = mv/(qB). So r ∝ m. The particle will describe semicircular paths (parallel) with radii ∝ mass. Time T = 2πm/(qB), so T ∝ m. Hence, the correct options are (b) and (d).

Teacher's Note: Radius is mv/qB and period 2πm/qB; both scale with mass at fixed q, v, B.

Exam Note: Period independent of speed, proportional to mass.

Question 2.5.12. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The magnetic field exists along the negative z-direction as shown. The radius of the circular path r = Mv/(QB). The velocity at the point of emergence P is v = 2(√3 î + ĵ) m s−1. So it makes an angle θ with the x-axis, when θ = tan−1(1/√3) = 30° = π/6. ∴ path OP = (π/6)·r = (π/6)(Mv/QB) = (π/6)(M·4/QB) = (2/3)(πM/QB). ∴ time t = 10 ms = 10 × 10−3 s = Path OP/v = (2/3)πM/(QB × 4) ⇒ B = 50πM/(3Q). Hence, the correct options are (a) and (c).

Teacher's Note: Deflection angle equals the arc angle; arc length over speed gives the time.

Exam Note: Arc angle equals velocity turn angle.

Question 2.5.13. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Since r = mv/(QB), the distance of re-entry into Region 1 from P1 is 2r ⇒ d = 2mv/(QB) ⇒ d ∝ m. Given, B = (8/13)(p/QR), so the radius, r = p/(QB) = (13/8)R = 1.6R, which is greater than 3R/2. Hence the particle will enter Region 3. For B > (2/3)(p/QR), r′ < (3/2)R, so the particle will re-enter Region 1. Linear momentum has a constant magnitude in a magnetic field. ∴ at P1, pi = p î and at the farthest point from the y-axis (at A), pf = p ĵ. ∴ the magnitude of the change in momentum, |Δp| = |pf − pi| = p|ĵ − î| = √2 p. Hence, the correct options are (a) and (b).

Teacher's Note: Re-entry needs radius under the region width; magnetic force never changes |p|.

Exam Note: Magnetic field changes direction of p, not magnitude.

Question 2.5.14. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Induced emf 0 → L (region) and 3L → 4L (region). Motional emf ε = −BLv, i = ε/R = BLv/R. Force on a current-carrying conductor in a B field, F = iLB. Now, F = −m dv/dt = −m(dv/dx)(dx/dt) = −mv dv/dx = iLB = B2L2v/R ⇒ dv = −(B2L2/mR)dx. Integrating, ∫v0v dv = −(B2L2/mR)∫0x dx. ∴ velocity as a function of x, v(x) − v0 = −(B2L2/mR)·x ⇒ v(x) = v0 − (B2L2/mR)·x. Now, current at any position (x), i(x) = (BL/R)v = (BL/R)[v0 − (B2L2/mR)x], and the force F(x) = LB·i = (L2B2/R)[v0 − (B2L2/mR)x]. Considering Lenz’s law with these results, the graphs represented in options (c) and (d) are correct. (The graph options themselves are not reproduced in the source.)

Teacher's Note: Use v dv/dx for position-based motion; v, i and F fall linearly with x inside the field.

Exam Note: Magnetic drag gives linear velocity decrease with x.

Question 2.5.15. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The magnetic flux linked with the loop due to current (assumed) through the wire, φl,w = ∫0h B dA = ∫0h (μ0I/2πr)·2r dr = μ0Ih/π ⇒ mutual inductance M = φl,w/I = μ0h/π. The magnitude of the induced emf in the wire εw = |−M dI/dt| = (μ0h/π)(dI/dt) = (μ0/π)(0.1 m)(10 A s−1) = (μ0/π) V. According to Lenz’s law, the loop should move away, so there will be a repulsive force between the wire and the loop. Hence, the correct options are (b) and (c).

Teacher's Note: Slice the triangle into strips of width 2r; flux integral gives M = μ₀h/π.

Exam Note: Lenz law: induced effect opposes the change.

Question 2.5.16. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The flux of the magnetic field through the wire loop is as much positive (outward) as negative (inward). Hence, φ = zero and dφ/dt = zero. Hence, the correct options are (a) and (c).

Teacher's Note: Equal outward and inward flux cancel, so net flux and induced emf vanish.

Exam Note: Add signed flux over both halves.

Question 2.5.17. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. After a very long time, magnetic flux linked with each coil is the same, hence L1i1 = L2i2 (∵ −L1dI1/dt = −L2dI2/dt) ⇒ i1 = [L2/(L1 + L2)]i = [L2/(L1 + L2)](V/R) and i2 = [L1/(L1 + L2)]i = [L1/(L1 + L2)](V/R). At t = 0, the inductors offer a large obstruction to the current through R. So, i = 0. Now, i1/i2 = L2/L1 = constant. Hence, the correct options are (b), (c) and (d).

Teacher's Note: Inductors in parallel carry currents inversely proportional to their inductances at all times.

Exam Note: Parallel inductors: L₁i₁ = L₂i₂.

Question 2.5.18. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The net magnetic flux through the loop at time t is φ = B(2A − A) cos ωt = BA cos ωt ...(i) ⇒ |dφ/dt| = BAω sin ωt, which is maximum when ωt = π/2. In the smaller loop, ε = −dφ/dt = ABω sin ωt, and the net emf in the system due to both the loops (see Equation i), ε″ = −dφ/dt = ABω sin ωt ⇒ amplitudes (ABω) in both the cases is the same. Hence, the correct options are (a) and (d).

Teacher's Note: Net flux is the algebraic sum of both loops; emf amplitude is ABω.

Exam Note: Emf = −dφ/dt; take net flux of both loops.

Question 2.5.19. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The amplitude of the voltage across the terminals X and Y, VXY = √(V02 + V02 − 2V02 cos(2π/3)) = √3 V0. Similarly, VYZ = VXZ = √3 V0. The rms value = peak value/√2 ⇒ VXYrms = √(3/2) V0 and VYZrms = √(3/2) V0. Voltmeter reading (Vrms) is the same for any two terminals. Hence, the correct options are (a) and (d).

Teacher's Note: Three phases 120° apart: line voltage is the phasor difference, √3 times phase voltage.

Exam Note: Line voltage = √3 × phase voltage; rms = peak/√2.

Question 2.5.20. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. In a capacitor, current leads the voltage by π/2, hence initially V = V0 sin ωt. ∴ charge Q = CV = CV0 sin ωt = Q0 sin ωt, where Q0 = CV0 = CI0XC = I0/ω = 2 × 10−3 C. At t = 7π/6ω, cos ωt = −√3/2, hence I = −(√3/2)I0, which is anticlockwise. Immediately after t = 7π/6ω, the current i = (Vc + 50)/R = 10 A. Charge flow = Qfinal − Q(at 7π/6ω) = 2 × 10−3 C. Hence, the correct options are (c) and (d).

Teacher's Note: Capacitor current is dQ/dt, leading voltage by 90°; Q₀ = I₀/ω links charge and current.

Exam Note: Charge amplitude Q₀ = I₀/ω.

Question 2.5.21. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. XC = 1/ωC = 1/((100)(100 × 10−6)) = 100 Ω. XL = ωL = (100)(0.5) = 50 Ω. For the upper branch (1), z1 = √(R2 + XC2) = 100√2 Ω. For the lower branch (2), z2 = √(R2 + XL2) = 50√2 Ω. Source voltage V = V0 sin ωt = 20√2 sin ωt. ∴ I1 = (20√2/100√2) sin(ωt + π/4), and I2 = (20√2/50√2) sin(ωt − π/4). Taking the rms values, ⇒ I = √(I12 + I22) = √(1/50 + 4/50) = √(1/10) ≈ 0.3 A. Voltage across the resistor, VR100 = (I1)rms × 100 = (0.2/√2) × 100 = 10√2 V. Similarly, VR50 = (0.4/√2) × 50 = 10√2 V. Hence, the correct options are (a) and (c).

Teacher's Note: Branch currents are ±45° from the source, so they are 90° apart and add in quadrature.

Exam Note: Quadrature currents: add squares of rms values.

Question 2.5.22. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Peak current I0 = V0/z = V0/√(R2 + (ωL − 1/ωC)2). At resonance, (i) the phase difference between current and voltage is zero, and (ii) the circuit is resistive. ∴ XL = XC ⇒ ωr = √(1/LC) ⇒ ωr = 106 rad s−1. The resonant frequency 1/√(LC) does not depend on R. At ω (≫ ωr = 106), XL ≫ XC, the circuit acts as inductive. If ω → 0, XC = 1/ωC → ∞, z → ∞, so I → 0. Hence, the correct options are (a) and (b).

Teacher's Note: At resonance X_L = X_C; below it the circuit is capacitive, above it inductive.

Exam Note: Resonance: ω = 1/√(LC), independent of R.

Question 2.5.23. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. I = V/Z, V2 = VR2 + VC2 = (IR)2 + (I/ωC)2 and Z2 = R2 + (1/ωC)2. ∴ current I = V/√(R2 + 1/(ω2C2)) and VC = I(1/ωC). In case (A), CA is less and in case (B), CB has larger value. ∴ (XC)A > (XC)B ⇒ ZA > ZB ⇒ IRA < IRB. Similarly, VC = (V/Z)XC = V/√(1 + R2ω2C2) ⇒ VCA > VCB. Hence, the correct options are (b) and (c).

Teacher's Note: Smaller C means larger X_C, larger Z, smaller current but larger capacitor voltage.

Exam Note: Compare X_C = 1/ωC across the two cases.

Question 2.5.24. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The forces on BC and DA are equal and opposite in direction. Hence Fnet on the loop is zero. Torque τ = m × B = IA × B. ∵ A is ⊥ B, |τ| = IAB ≠ 0. As seen from O, the loop rotates clockwise. Hence, the correct options are (a) and (c).

Teacher's Note: Uniform field gives zero net force on a loop but a torque I A × B.

Exam Note: Uniform B: net force zero, torque nonzero.

Question 2.5.25. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. For a charge q in a magnetic field B, F = qvB, mv2/r = qvB, r = mv/(qB). For the particle to enter Region III, r > l ⇒ mv/(qB) > l ⇒ v > qlB/m. For the path length to be maximum, l = r ⇒ v = qBl/m. For r < l, the particle describes a semicircle for which time t = T/2 = πm/(qB), which is independent of velocity. Hence, the correct options are (a), (c) and (d).

Teacher's Note: Entering the next region needs radius larger than region width; a semicircle takes half a period.

Exam Note: Semicircle time πm/qB independent of speed.

Question 2.5.26. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Equivalent resistance of the circuit, R = 2 kΩ + (6 kΩ)(1.5 kΩ)/(7.5 kΩ) = 16/5 kΩ. ∴ current through the battery, I = V/R = 24 V/(16/5 kΩ) = 7.5 mA. The potential difference across R1 is IR1 = (7.5 mA)(2 kΩ) = 15 V. ∴ the potential difference across the parallel combination of 6 kΩ and 1.5 kΩ will be 24 V − 15 V = 9 V. The ratio of power dissipated in R1 and R2 is P1/P2 = I2R1/(V22/R2) = (7.5 mA)2 × (2 kΩ)/((15 V)2/6 kΩ) = 3 : 1. Interchanging R1 and R2, equivalent resistance R′ = 6 kΩ + (2 kΩ)(1.5 kΩ)/(3.5 kΩ) = 48/7 kΩ. ∴ current I′ = 24/(48/7) mA = 7/2 mA. The PD across RL, V′ = 24 V − (7/2 × 6) V = 3 V. The power dissipated in RL is V′2/RL = (3 V)2/RL. Previous power dissipation = V2/RL = (9 V)2/RL. ∴ the power dissipation is decreased by a factor of 9. Hence, the correct options are (a), (c) and (d). Corrected: the book prints the units of 48/7 and 7/2 as Ω and A; with kΩ and mA used here they are 48/7 kΩ and 7/2 mA.

Teacher's Note: Reduce parallel pairs first, then use voltage division; power in R_L scales as V².

Exam Note: Track units: kΩ with mA gives volts.

Question 2.5.27. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. As the induced emf −dφ/dt is same in both the rings, the strength of the induced current will depend upon the resistance of the ring. Larger the resistivity, smaller is the current. Thus for hA > hB, the correct options are (b) and (d).

Teacher's Note: Same emf in both rings; current is emf divided by ring resistance.

Exam Note: Equal emf: current depends on resistance.

2.6 Ray Optics and Wave Optics

Question 2.6.1. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. At P, sin 60° = √3 sin γ. ∴ γ = 30°. sin C = 1/√3, C < 45°. Internal reflection occurs at R. Angle between the initial and final rays = angle of deviation = 90°. Hence, the correct options are (a), (b) and (c).

Teacher's Note: Apply Snell law at P, compare angle of incidence at R with critical angle.

Exam Note: Total internal reflection when i exceeds critical angle.

Question 2.6.2. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. For air to glass, 1.5/f1 = (1.4 − 1)/R + (1.5 − 1.4)/R ⇒ f1 = 3R. For glass to air, 1/f2 = (1.4 − 1.5)/(−R) + (1 − 1.4)/(−R) ⇒ f2 = 2R. Hence, the correct options are (a) and (c).

Teacher's Note: Use lens-maker formula for each surface with refractive index of the surrounding medium.

Exam Note: Sum surface powers (n₂−n₁)/R, mind signs.

Question 2.6.3. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. μ = sin((A + δm)/2)/sin(A/2) = sin A/sin(A/2) = 2 cos(A/2) ...(i). At minimum deviation, i + i = A + δm = 2A ⇒ i1 = A, r1 = A/2 = i1/2. From equation (i), A = 2 cos−1(μ/2). sin C = 1/μ, cos C = √(1 − 1/μ2). Now, sin i = μ sin(A − C) = μ(sin A cos C − cos A sin C) = μ(sin A √(1 − 1/μ2) − cos A/μ) = (sin A √(μ2 − 1) − cos A) ⇒ sin i = (sin A √(4cos2(A/2) − 1) − cos A). At i1 = A, the ray undergoes minimum deviation through the prism and passes symmetrically so that the ray inside the prism is parallel to its base. Hence, the correct options are (a), (c) and (d).

Teacher's Note: Grazing emergence needs r₂ = C, so r₁ = A − C; then Snell law gives i.

Exam Note: Grazing emergence: r₂ equals critical angle.

Question 2.6.4. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. For refraction through S1: 1/v − 1.5/(−50) = (1 − 1.5)/(−10) ⇒ v = 50 cm (at Q). For refraction through S2: u = −(d − 50) cm, v = ∞ (∵ rays are parallel). ∴ 1.5/∞ − 1/(−(d − 50)) = (1.5 − 1)/(+10) ⇒ d = 70 cm. Hence, the correct option is (b).

Teacher's Note: Image from the first surface is the object for the second; parallel emergent rays mean v = ∞.

Exam Note: Apply refraction formula surface by surface.

Question 2.6.5. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. From lens formula, 1/f = 1/v − 1/u = 1/60 − 1/(−30) = 1/20 ⇒ f = 20 cm = R/(n − 1). For reflection from the convex surface (using mirror formula), 1/f = 1/u + 1/v = 1/(−30) + 1/10 = 1/15. ∴ R = 2f = 30 cm. But n − 1 = R/20 = 1.5. ∴ n = 2.5. The faint image is erect and virtual. Hence, the correct options are (a) and (d).

Teacher's Note: Lens image gives f; the faint image from the convex surface acting as a mirror gives R.

Exam Note: Plano-convex lens: f = R/(n−1).

Question 2.6.6. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. From Snell’s law, n1 sin θi = n2 sin θ2 = n2 sin θf. The deviation of ray in the slab will depend on n(z). Hence, l will depend on n(z) and is independent of n2. Hence, the correct options are (a), (c) and (d).

Teacher's Note: Snell law across a stratified medium relates only the end media; lateral shift depends on n(z).

Exam Note: Stratified layers: n sin θ is invariant.

Question 2.6.7. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. The path difference at any angular position P(θ) is Δ = d cos θ. Path difference at P1: Δ = d cos 90° = 0 (max). Path difference at P2: Δ = d cos 0° = d = 1.8 mm ⇒ Δ/λ = 1.8 mm/600 nm = 3000. ∴ 3000th-order bright fringe will form at P2, and the total number of fringes between P1 and P2 is close to 3000. Angular separation between two consecutive fringes = |dθ/dn| = λ/(d sin θ). As we move from P1 to P2, the angular width increases. Hence, the correct options are (a) and (c).

Teacher's Note: Detector on a circle: path difference d cos θ; count orders as Δ/λ.

Exam Note: Order number = path difference divided by λ.

Question 2.6.8. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Since the line joining S1 and S2 is perpendicular to the screen, the fringe pattern will consist of semicircles. At O, phase difference = (2π/λ)(S1O − S2O) = 2π(0.6003 × 10−3 m)/(600 × 10−9 m) = 2001π. Thus the region very close to O is dark. Hence, the correct options are (b) and (d).

Teacher's Note: Odd multiple of π phase difference means destructive interference at O.

Exam Note: Phase difference (2π/λ) × path difference.

Question 2.6.9. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. d = λ/(2 sin θ), ln d = ln(λ/2) − ln(sin θ). Differentiating, Δd/d = 0 − cos θ Δθ/sin θ. ∴ (Δd/d)max = cot θ·Δθ or (Δd)max = d cot θ·Δθ = (λ/(2 sin θ))·cot θ Δθ = (λ/2)(cos θ/sin2 θ)Δθ. As θ increases, cot θ decreases and cos θ/sin2 θ also decreases. Hence fractional error in d decreases. Hence, the correct option is (d).

Teacher's Note: Logarithmic differentiation gives fractional error cot θ·Δθ, which falls as θ grows.

Exam Note: Fractional error: differentiate the logarithm.

Question 2.6.10. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Fringe width β = Dλ/d. ∵ λ2 > λ1 ⇒ β2 > β1. Number of fringes in a given distance = m = y/β ⇒ m2 < m1. 3rd maximum of λ2 = 3β2 = 3Dλ2/d = 1800D/d, and 5th minimum of λ1 = 9λ1D/(2d) = 1800D/d. Angular separation θ = β/D = λ/d. Hence, the correct options are (a), (b) and (c).

Teacher's Note: Longer wavelength gives wider fringes; locate nth maximum at nβ and nth minimum at (n−½)β.

Exam Note: Minimum positions are (n − ½)β.

Question 2.6.11. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. For at least one maxima, sin θ = λ/d. If d = λ, sin θ = 1, θ = π/2. So y → ∞. If λ < d < 2λ, sin θ exists and y is finite. Imax = I1 + I2 + 2√(I1I2). Imin = I1 + I2 − 2√(I1I2). Initially, Imax = 9I and Imin = I. If I1 = I2 then I′max = 4I, I′min = 0. Thus intensities of both the dark and bright fringes will decrease. Hence, the correct options are (a) and (b).

Teacher's Note: Maxima need d sin θ = nλ; unequal intensities raise the minimum, equalising them drops the maximum.

Exam Note: Imax and Imin use (√I₁ ± √I₂)².

Question 2.6.12. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Using mirror formula 1/u + 1/v = 1/f, we get: For (a): (42, 56); f = −24 cm. For (b): (48, 48); f = −24 cm. For (c): (66, 33); f = −22 cm. For (d): (78, 39); f = −26 cm. Thus options (c) and (d) are incorrectly recorded.

Teacher's Note: Compute f from each (u, v) pair; the inconsistent ones are the wrongly recorded data.

Exam Note: Consistent readings give the same focal length.

2.7 Modern Physics

Question 2.7.1. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. KEmax of an electron just after emission, KEi = hc/λPh − φ, and on reaching the anode, KEf = (hc/λPh − φ) + eV. For V ≫ φ/e, KEf ≈ eV, and λe = h/√(2meV) ⇒ λe ∝ 1/√V. If φ and λPh increase, KEf decreases and λe increases. So option (c) is incorrect. ∵ λe = h/√(2m(KEf)), ∴ dλe/dt ≠ dλPh/dt ... option (b) is incorrect. Hence, the correct option is (a).

Teacher's Note: Final KE adds eV to the emitted KE; de Broglie wavelength follows from that final KE.

Exam Note: Energy at anode: hν − φ + eV.

Question 2.7.2. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. hc/λ = eV0 + φ or V0 = (hc/e)(1/λ) − φ/e. The plot of V0 vs 1/λ is linear with negative intercept on the V0 axis. The plot of V0 vs λ is nonlinear. Hence, the correct options are (a) and (c).

Teacher's Note: Einstein equation gives V₀ linear in 1/λ with slope hc/e and intercept −φ/e.

Exam Note: Stopping potential vs 1/λ is a straight line.

Question 2.7.3. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Orbital radius, r = r0n2/Z ⇒ Δr/r = 2Δn/n. For Δn = 1, Δr/r ∝ 1/n. Angular momentum, L = nh/2π, ΔL/L = Δn/n. ∴ ΔL/L ∝ 1/n. Total energy, En = −13.6Z2/n2. ∴ ΔEn/En = −2Δn/n ⇒ ΔE/E ∝ 1/n ... option (c) incorrect. Hence, the correct options are (a), (b) and (d).

Teacher's Note: Take fractional changes of r, L and E from their power laws in n.

Exam Note: Fractional change = power × Δn/n.

Question 2.7.4. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Given: 4.5a0 = a0n2/Z and nh/2π = 3h/2π. Solving, n = 3 and Z = 2. Possible wavelengths correspond to the transitions 3 → 2, 2 → 1 and 3 → 1 and are given by 1/λ1 = RZ2(1/12 − 1/32) ⇒ λ1 = 9/(32R); 1/λ2 = RZ2(1/12 − 1/22) ⇒ λ2 = 1/(3R); 1/λ3 = RZ2(1/22 − 1/32) ⇒ λ3 = 9/(5R). Hence, the correct options are (a) and (c).

Teacher's Note: Angular momentum gives n; radius gives Z; then list all downward transitions.

Exam Note: From n = 3, three emission lines are possible.

Question 2.7.5. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. 23692U → 14054Xe + 9438Sr + 10X + 10Y, where X = Y = n (neutron). Q-value of reaction, Q = (140 + 94) × 8.5 − 236 × 7.5 = 1989 − 1770 = 219 MeV. In options (a) and (d), the energy and charge conservation laws are followed, so Q = KXe + KSr + KX + KY = 129 + 86 + 4 = 219. In (d), pXe > pSr + pX + pY, so the conservation of linear momentum will not hold and only option (a) will hold. Corrected: the book prints Q = 236 × 7.5 − (140 + 94) × 8.5 = 1170 − 1989; the correct working is 234 × 8.5 − 236 × 7.5 = 1989 − 1770 = 219 MeV (same final answer).

Teacher's Note: Q equals binding energy of products minus reactant; also check momentum conservation for each option.

Exam Note: Q = BE(products) − BE(reactant).

Question 2.7.6. (Multiple-correct, Type 2 question; the statement is not printed in the source solutions book, so only the printed solution is given.)

Solution. Energy is released during nuclear fusion and fission when the final binding energy per nucleon is greater than the initial binding energy so that the nucleus gets more stable. This will occur in fusion [option (b)] and fission [option (d)]. Hence, the correct options are (b) and (d).

Teacher's Note: Energy is released when binding energy per nucleon rises, which happens in fusion of light and fission of heavy nuclei.

Exam Note: Fusion and fission both raise binding energy per nucleon.

JEE Mathematics: SB Mathur Solutions for SB Mathur Physics Solutions Chapter 2 Multiple Choice Questions Type 2 Part 3

Access JEE Mathematics Solutions

Review detailed solutions for JEE Mathematics. The SB Mathur Physics Solutions Chapter 2 Multiple Choice Questions Type 2 Part 3 PDF provides comprehensive answers mapped to standard SB Mathur Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Next Steps in Your Mathematics Revision

In addition to these SB Mathur Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these SB Mathur Solutions for JEE Physics?

They are chapter-wise solved questions from the SB Mathur book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the SB Mathur JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these SB Mathur solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising SB Mathur JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.