SB Mathur Solutions for JEE Physics: Chapter 02 Multiple Choice Questions Type 2
Explore reliable textbook solutions for Chapter 02 Multiple Choice Questions Type 2 tailored for JEE learners using SB Mathur methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice JEE Physics Solutions: Chapter 02 Multiple Choice Questions Type 2
Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Multiple-Choice Questions: Type 2 - 2.1 General Physics to 2.5 Current Electricity and Magnetism (Part 1)
2.1 General Physics
Question 2.1.1. Consider (i) a vernier callipers in which each 1 cm on the main scale is divided into 8 equal divisions and (ii) a screw gauge with 100 divisions on its circular scale. In the vernier callipers 5 divisions of the vernier scale coincide with 4 divisions on the main scale and in the screw gauge, one complete rotation of the circular scale moves it by two divisions on the linear scale. Now, which of the following statements is/are correct?
(a) If the pitch of the screw gauge is twice the least count of the vernier callipers, the least count of the screw gauge is 0.01 mm.
(b) If the pitch of the screw gauge is twice the least count of the vernier callipers, the least count of the screw gauge is 0.005 mm.
(c) If the least count of the linear scale of the screw gauge is twice the least count of the vernier callipers, the least count of the screw gauge is 0.01 mm.
(d) If the least count of the linear scale of the screw gauge is twice the least count of the vernier callipers, the least count of the screw gauge is 0.005 mm.
Solution. Vernier callipers: 1 MSD = 1/8 cm; 5 VSD = 4 MSD, so 1 VSD = (4/5)(1/8) = 1/10 cm. Least count = 1 MSD − 1 VSD = 1/8 − 1/10 = 1/40 cm = 0.025 cm.
(a), (b): pitch of screw gauge = 2 × 0.025 = 0.05 cm; least count = 0.05/100 cm = 0.005 mm. So (b) is correct and (a) is not.
(c), (d): least count of the linear scale = 2 × 0.025 = 0.05 cm; pitch = 2 linear divisions = 0.1 cm; least count = 0.1/100 cm = 0.01 mm. So (c) is correct and (d) is not.
Correct options: (b) and (c).
Teacher's Note: Least count of a screw gauge = pitch ÷ circular divisions; pitch here equals two linear-scale divisions.
Exam Note: Compute vernier LC first; marks for pitch/100.
Question 2.1.2. A student uses a simple pendulum of exactly 1-m length to determine g, the acceleration due to gravity. He uses a stopwatch with the least count of 1 second for this and records 40 seconds for 20 oscillations. For this observation, which of the following statements is/are true?
(a) The error ΔT in measuring T, the time period, is 0.05 second.
(b) The error ΔT in measuring T, the time period, is 1 second.
(c) The percentage error in the determination of g is 5.
(d) The percentage error in the determination of g is 2.5.
Solution. Error in measuring T = 2 s/40 = 0.05 s = ΔT. Since T ∝ 1/√g, Δg/g = 2ΔT/T = 2(0.05)/2 = 1/20, so Δg/g × 100 = 5%.
Correct options: (a) and (c).
Teacher's Note: Stopwatch error is divided by the number of oscillations; g has T squared, so the percentage doubles.
Exam Note: Divide least count by 20; double the relative error.
Question 2.1.3. In an experiment to determine the acceleration due to gravity g, the formula used for the time period of a periodic motion is T = 2π√(7(R − r)/(5g)). The values of R and r are measured to be (60 ± 1) mm and (10 ± 1) mm respectively. In five successive measurements, the time period is found to be 0.52 s, 0.56 s, 0.54 s, 0.59 s and 0.57 s. The least count of the watch used for measurement of time period is 0.01 s. Which of the following statements is/are true?
(a) The error in the measurement of r is 10%.
(b) The error in the measurement of T is 3.57%.
(c) The error in the measurement of T is 2%.
(d) The error in the measurement of g is 11%.
Solution. Measured r = (10 ± 1) mm, so % error in r = (1/10) × 100 = 10%.
Mean T = 2.78/5 = 0.556 ≈ 0.56 s. Mean absolute error = (1/5)Σ|T − Tav| ≈ 0.02 s, so % error in T = (0.02/0.56) × 100 = 3.57%.
Now g ∝ (R − r)/T², so dg/g = 2(dT/T) + (dR + dr)/(R − r) = 2(3.57%) + (1 + 1)/(60 − 10) × 100% = 7.14% + 4% = 11.14% ≈ 11%.
Correct options: (a), (b) and (d).
Teacher's Note: Errors in R and r add in R − r; the T error is doubled because g ∝ 1/T².
Exam Note: Use mean absolute error for T; add errors, never subtract.
Question 2.1.4. Planck constant h, speed of light c and gravitational constant G are used to form a unit of length L and a unit of mass M. Then the correct option(s) is/are
(a) M ∝ √c (b) M ∝ √G (c) L ∝ √h (d) L ∝ √G
Solution. Dimensions: [h] = ML²T⁻¹, [c] = LT⁻¹, [G] = M⁻¹L³T⁻². Solving gives M ∝ √(hc/G) and L ∝ √(hG/c³).
So M ∝ √c, L ∝ √h and L ∝ √G.
Correct options: (a), (c) and (d).
Teacher's Note: Write M and L as hacbGd and match exponents of M, L, T.
Exam Note: Planck-unit derivation; match dimensions systematically.
Question 2.1.5. The length-scale (l) depends on the permittivity (ε) of the dielectric material, the Boltzmann constant (kB), the absolute temperature (T), the number per unit volume (n) of a certain charged particle, and the charge (q) carried by each of the particles. Which of the following expressions for l is/are dimensionally correct?
(a) l = √(nq²/(εkBT)) (b) l = √(εkBT/(nq²))
(c) l = √(q²/(εn2/3kBT)) (d) l = √(q²/(εn1/3kBT))
Solution. Energy ≡ F·L ≡ kBT, where F is force and L is length. Permittivity ε ≡ Q²/(FL²), and the number density n ≡ L⁻³.
With these, only (b) and (d) reduce to dimensions of L² under the root.
Correct options: (b) and (d).
Teacher's Note: Use ε = q²/(F·L²) and kBT = energy to test each expression.
Exam Note: Check dimensions of the quantity under the root equal L².
Question 2.1.6. In terms of potential difference V, electric current I, permittivity ε0, permeability μ0 and speed of light c, the dimensionally correct equation(s) is/are
(a) μ0I² = ε0V² (b) ε0I = μ0V (c) I = ε0cV (d) μ0cI = ε0V
Solution. Magnetic energy in an inductor = ½LI² = ½(μ0N²A/l)I², and electrical energy in a capacitor = ½CV² = ½(ε0A/d)V². So μ0AI²/l and ε0AV²/d have the same dimension, hence μ0I² and ε0V² have the same dimension.
For a capacitor Q = CV, so I = Q/t = CV/t = ε0(A/d)(V/t) = ε0(A/(td))V. Since A/(td) has the dimension of speed, I = ε0cV (dimensionally).
Correct options: (a) and (c).
Teacher's Note: Compare magnetic energy in an inductor with electric energy in a capacitor, then Q = CV.
Exam Note: Energy comparison gives (a); I = dQ/dt gives (c).
Question 2.1.7. A small block of mass 0.1 kg lies on a fixed inclined plane PQ which makes an angle θ with the horizontal. A horizontal force of 1 N is applied on this block through its centre of mass (the force acts horizontally, towards the plane, as in the figure: the plane rises from P at the right-hand end of the base OP up to Q above O). The block remains stationary if (take g = 10 m s−2)
(a) θ = 45° (b) θ > 45° and a frictional force acts on the block towards P
(c) θ > 45° and a frictional force acts on the block towards Q (d) θ < 45° and a frictional force acts on the block towards Q
(Figure: the 1 N force points horizontally to the left, towards the vertical side OQ.)
Solution. Here mg = 1 N and the horizontal force is also 1 N. Along the incline the component of the weight is mg sin θ (down the slope, towards P) and the component of the horizontal force is 1 × cos θ (up the slope, towards Q).
If sin θ = cos θ, i.e. θ = 45°, friction f = 0.
If sin θ > cos θ (θ > 45°), friction must act up the slope, towards Q.
If sin θ < cos θ (θ < 45°), friction must act down the slope, towards P.
Correct options: (a) and (c).
Teacher's Note: Resolve weight and the horizontal push along the slope; compare mg sin θ with F cos θ.
Exam Note: Equal 1 N forces make 45° the no-friction case.
Question 2.1.8. A flat plate is moving normal to its plane through a gas under the action of a constant force F. The gas is kept at a very low pressure. The speed v of the plate is much less than the average speed u of the gas molecules. Which of the following options is/are true?
(a) The resistive force experienced by the plate is proportional to v.
(b) The pressure difference between the leading and trailing faces of the plate is proportional to uv.
(c) The plate will continue to move with constant nonzero acceleration at all times.
(d) At a later time, the external force F balances the resistive force.
Solution. On the leading face a molecule of speed u returns with speed u + 2v; on the trailing face it leaves with u − 2v. Change in momentum at the leading surface: ΔP = 2m(u + v), at rate FL = 2m(u + v)u/d (taking return after distance d, Δt = d/u). Similarly FT = 2m(u − v)u/d.
Pressure difference = [2m(u + v)u − 2m(u − v)u]/(Ad) = 4muv/(Ad) (Corrected: the book prints 2muv/(Ad); the factor does not change the conclusion). Hence the pressure difference ∝ uv, and the resistive force = ΔP·A ∝ v. As v grows the resistive force grows until it equals F, so the acceleration falls to zero (terminal velocity).
Correct options: (a), (b) and (d).
Teacher's Note: Molecule rebound speeds differ on the two faces, giving resistive force proportional to v and a terminal speed.
Exam Note: Resistive force ∝ v means terminal velocity, not constant acceleration.
Question 2.1.9. A ladder of mass m leans against a wall (figure). It is in static equilibrium, making an angle θ with the horizontal floor. The coefficient of friction between the wall and the ladder is μ1 and that between the floor and the ladder is μ2. The normal reaction of the wall on the ladder is N1 and that of the floor is N2. If the ladder is about to slip then
(a) μ1 = 0, μ2 ≠ 0 and N2 tan θ = mg/2
(b) μ1 ≠ 0, μ2 = 0 and N1 tan θ = mg/2
(c) μ1 ≠ 0, μ2 ≠ 0 and N2 = mg/(1 + μ1μ2)
(d) μ1 = 0, μ2 ≠ 0 and N1 tan θ = mg/2
(Figure: ladder AB with foot A on the floor, top B against the vertical wall at right; the ladder makes angle θ with the floor.)
Solution. Since the ladder is about to slip, both frictional forces are limiting: f1 = μ1N1 (at the wall, upward) and f2 = μ2N2 (at the floor, towards the wall).
Horizontal: N1 = μ2N₂. Vertical: N2 + μ1N1 = mg.
Solving: N1 = μ2mg/(1 + μ1μ2) and N2 = mg/(1 + μ1μ2). So (c) is correct.
Torque about A (ladder length l): mg(l/2)cos θ = N1l sin θ + μ1N1l cos θ. Taking μ1 = 0, μ2 ≠ 0: N1 = μ2mg, so (mg/2)cos θ = N1 sin θ, i.e. N1 tan θ = mg/2. So (d) is correct. Taking torque about B shows (a) and (b) are incorrect.
Correct options: (c) and (d).
Teacher's Note: Limiting friction at both ends; use force balance then torque about the foot of the ladder.
Exam Note: Take torque about A for the angle.
Question 2.1.10. A particle of mass m is attached to one end of a massless spring of force constant k, lying on a frictionless horizontal plane. The other end of the spring is fixed. The particle starts moving horizontally from its equilibrium position at time t = 0 with an initial velocity u0. When the speed of the particle is 0.5u0, it collides elastically with a rigid wall. After this collision,
(a) the speed of the particle when it returns to its equilibrium position is u0
(b) the time at which the particle passes through the equilibrium position for the first time is t = π√(m/k)
(c) the time at which maximum compression in the spring occurs is t = (4π/3)√(m/k)
(d) the time at which the particle passes through the equilibrium position for the second time is t = (5π/3)√(m/k)
Solution. Initially at t = 0, v = u0, so v = u0cos ωt. At the collision, u0/2 = u0cos ωt1, so t1 = π/(3ω).
After the elastic collision the motion is reversed; at time t2 = 2t1 = 2π/(3ω) the particle again has speed u0 at equilibrium, so (a) is correct.
If t3 is the time of passing the equilibrium position for the second time, t3 = T/2 + 2t1 = π/ω + 2π/(3ω) = 5π/(3ω) = (5π/3)√(m/k).
Correct options: (a) and (d).
Teacher's Note: Collision reverses velocity at x = u₀/(2ω)-type point; time lost/gained is 2t₁ = 2π/3ω.
Exam Note: Use v = u₀cos ωt; elastic wall reverses velocity only.
Question 2.1.11. A block of mass M has a circular cut with a frictionless surface as shown. The block rests on a horizontal frictionless surface of a fixed table. Initially the right edge of the block is at x = 0, in a coordinate system fixed to the table. A point mass m is released from rest at the topmost point of the path as shown and it slides down. When the mass loses contact with the block, its position is at x and the velocity is v. At that instant, which of the following options is/are correct?
(a) The x-component of displacement of the centre of mass of the block M is −mR/(M + m).
(b) The position of the point mass is x = −√2 mR/(M + m).
(c) The velocity of the point mass m is v = √(2gR/(1 + m/M)).
(d) The velocity of the block M is v = −(m/M)√(2gR).
(Figure: a block of size R × R with a quarter-circular cut of radius R at its upper right; the mass m starts at the top left of the quarter circle, a distance R to the left of the right edge, and leaves at the bottom of the arc at the right edge.)
Solution. Conserving linear momentum: mv = MV, so V = mv/M.
Conserving energy: ½mv² + ½M(mv/M)² = mgR, so v = √(2gR/(1 + m/M)).
In the absence of external horizontal force, Δxcm = 0: mΔxm = −MΔxM, m(R − x) = Mx, so x = mR/(M + m) (the block moves leftward, so its displacement is −mR/(M + m), and the mass ends at x = −mR/(M + m), not −√2 mR/(M + m)).
Correct options: (a) and (c).
Teacher's Note: Horizontal momentum and energy conserved; centre of mass of the system does not shift horizontally.
Exam Note: Block shift = mR/(M+m); mass speed carries the 1 + m/M factor.
Question 2.1.12. The figure shows a system consisting of (i) a ring of outer radius 3R rolling clockwise without slipping on a horizontal surface with angular speed ω and (ii) an inner disc of radius 2R rotating anticlockwise with angular speed ω/2. The ring and the disc are separated by frictionless ball bearings. The system is in the xz-plane. The point P on the inner disc is at a distance R from the origin, where OP makes an angle of 30° with the horizontal. Then with respect to this horizontal surface
(a) the point O has linear velocity 3Rω î
(b) the point P has linear velocity (11/4 Rω î + (√3/4) Rω k̂)
(c) the point P has linear velocity (13/4 Rω î − (√3/4) Rω k̂)
(d) the point P has linear velocity ((3 − √3/4) Rω î + (1/4) Rω k̂)
Solution. The centre O of the ring has velocity V0 − (3R)ω î = 0, i.e. V0 = 3Rω î. So (a) is correct.
Velocity of P relative to O (disc rotating at ω/2 anticlockwise, radius R) has magnitude Rω/2, perpendicular to OP: VP,O = −(Rω/4) î + (√3 Rω/4) k̂.
VP = VP,O + V0 = −(Rω/4) î + (√3Rω/4) k̂ + 3Rω î = (11/4)Rω î + (√3/4)Rω k̂. So (b) is correct.
Correct options: (a) and (b).
Teacher's Note: Velocity of P = velocity of centre + rotation of the disc about the centre.
Exam Note: Ring rolls so centre speed 3Rω; add the disc's Rω/2 component.
Question 2.1.13. The position vector r of a particle of mass m is given by r(t) = αt³ î + βt² ĵ, where α = 10/3 m s−3, β = 5 m s−2 and m = 0.1 kg. At t = 1 s, which of the following statements is/are true about the particle?
(a) The velocity v is given by v = (10î + 10ĵ) m s−1.
(b) The angular momentum L with respect to the origin is given by L = −(5/3)k̂ N m s.
(c) The force F is given by F = (î + 2ĵ) N.
(d) The torque τ with respect to the origin is given by τ = −(20/3)k̂ N m.
Solution. v = dr/dt = 3αt² î + 2βt ĵ = 10t² î + 10t ĵ; a = (20t î + 10 ĵ) m s−2. At t = 1 s, v = 10(î + ĵ) m s−1, a = (20î + 10ĵ) m s−2, and r = (10/3 î + 5ĵ) m.
L = r × mv = (10/3 î + 5ĵ) × 0.1(10î + 10ĵ) = (10/3 − 5)k̂ = −(5/3)k̂ N m s.
F = ma = 0.1(20î + 10ĵ) = (2î + ĵ) N, so (c) is wrong.
τ = r × F = (10/3 î + 5ĵ) × (2î + ĵ) = (10/3 − 10)k̂ = −(20/3)k̂ N m.
Correct options: (a), (b) and (d).
Teacher's Note: Differentiate r twice for a, then use L = r × mv and τ = r × F.
Exam Note: Check the i and j components of F carefully in option (c).
Question 2.1.14. Two solid cylinders P and Q of the same mass and same radius start rolling down a fixed inclined plane from the same height at the same time. The cylinder P has most of its mass concentrated near its surface, while the cylinder Q has most of its mass concentrated near the axis. Which of the following statements is/are correct?
(a) Both the cylinders reach the ground at the same time.
(b) The cylinder P has larger linear acceleration than the cylinder Q.
(c) Both the cylinders reach the ground with the same translational kinetic energy.
(d) The cylinder Q reaches the ground with large angular speed.
Solution. Acceleration down the plane a = mg sin θ/(m + I/R²). For P (I = mR²): aP = g sin θ/2. For Q (I ≈ 0): aQ = g sin θ.
So Q reaches the bottom first with larger linear speed, ωP = √(2·(g/2)·l)/R and ωQ = √(2gl)/R, so ωQ > ωP.
Correct option: (d).
Teacher's Note: Larger moment of inertia gives smaller rolling acceleration; Q (small I) wins.
Exam Note: Use a = g sin θ/(1 + I/mR²) for both.
Question 2.1.15. A rigid uniform bar AB of length L is slipping from its vertical position on a frictionless floor (as shown in the figure). At some instant of time, the angle made by the bar with the vertical is θ. Which of the following statements about the motion is/are correct?
(a) The trajectory of the point A is a parabola.
(b) The instantaneous torque about the point in contact with the floor is proportional to sin θ.
(c) The mid-point of the bar will fall vertically downwards.
(d) When the bar makes an angle θ with the vertical, the displacement of its mid-point from the initial position is proportional to (1 − cos θ).
(Figure: the bar starts vertical at O with end A at the top and end B on the floor; it slips so that B moves to the right along the smooth floor and the bar makes angle θ with the vertical.)
Solution. There is no external horizontal force on the bar, so its centre of mass falls vertically downwards: (c) is correct.
For translation: mg − N = maCM. For rotation about the CM: N(L/2)sin θ = ICMα, and aCM = α(L/2)sin θ. Solving, α = mg(L/2)sin θ/(ICM + (mL²/4)sin²θ), and the torque about the point of contact = Iα = (mL²/3)α, which is not proportional to sin θ: (b) is not correct.
Displacement of the mid-point = (L/2)(1 − cos θ): (d) is correct.
For point A: x = −(L/2)sin θ and y = L cos θ, so y²/L² + 4x²/L² = 1, which is an ellipse, not a parabola: (a) is not correct.
Correct options: (c) and (d).
Teacher's Note: No horizontal force means the centre of mass drops vertically; the end A then traces an ellipse.
Exam Note: Eliminate θ from A's coordinates to identify the curve.
Question 2.1.16. A wheel of radius R and mass M is placed at the bottom of a fixed step of height R as shown in the figure. A constant force is continuously applied on the surface of the wheel so that it just climbs the step without slipping. Consider the torque τ about an axis normal to the plane of the paper passing through the point Q. Which of the following options is/are correct?
(a) If the force is applied tangentially at point X then τ ≠ 0 but the wheel never climbs the step.
(b) If the force is applied normal to the circumference at point P then τ is zero.
(c) If the force is applied normal to the circumference at point X then τ is constant.
(d) If the force is applied at point P tangentially then τ decreases continuously as the wheel climbs.
(Figure: a wheel with centre R touches the corner Q of the step at its right; P is the left end of the horizontal diameter through the centre, S is the topmost point and X is a point on the lower left part of the rim.)
Solution. When the force is applied normal to the circumference at P, its line of action always passes through the centre O (and through Q at the start), so the torque about Q is always zero: (b) is correct.
When the force is applied normal to the circumference at X, the force and its perpendicular distance from Q remain constant, so τ = constant: (c) is correct.
Correct options: (b) and (c).
Teacher's Note: Torque = F × perpendicular distance from Q; a normal force on a circle passes through its centre.
Exam Note: Normal force passes through the centre.
Question 2.1.17. Two thin circular discs of mass m and 4m, having radii of a and 2a respectively, are tightly fixed by a massless rigid rod of length l = √24 a through their centres. This assembly is laid on a firm and flat surface, and set rolling without stopping on the surface so that the angular speed about the axis of the rod is ω. The angular momentum of the entire assembly about the point O is L (see the figure). Which of the following statements is/are true?
(a) The magnitude of the angular momentum of the assembly about its centre of mass is 17ma²ω/2.
(b) The magnitude of the z-component of L is 55ma²ω.
(c) The magnitude of angular momentum of centre of mass of the assembly about the point O is 81ma²ω.
(d) The centre of mass of the assembly rotates about the z-axis with an angular speed of ω/5.
(Figure: the rod through the centres of the two discs is inclined to the floor and, extended, passes through the point O on the floor; the centres are at distances l and 2l from O along the rod; discs are perpendicular to the rod.)
Solution. Angular momentum about the CM along the rod axis (1): L1 = (ma²/2)ω + (4m(2a)²/2)ω = (17ma²/2)ω. So (a) is correct.
VCM = (1/5m)(m·ωa + 4m·ω2a) = 9ωa/5, and lCM = (1/5m)(ml + 4m·2l) = 9l/5.
The angular velocity about axis (2) (vertical-plane axis through O) is VCM/lCM = ωa/l. Its component along the z-axis is ωz = (ωa/l)cos θ = (ωa/l)(l/5a) = ω/5, so (d) is correct.
Correct options: (a) and (d).
Teacher's Note: Spin about the rod axis plus rotation of the CM about the vertical; moment of inertia of discs add.
Exam Note: Find the rod angle from both discs touching the floor.
Question 2.1.18. Two spherical planets P and Q have the same uniform density ρ, masses MP and MQ and surface areas A and 4A respectively. A spherical planet R also has uniform density ρ and its mass is (MP + MQ). The escape velocities from the planets P, Q and R are vP, vQ and vR respectively. Then
(a) vQ > vR > vP (b) vR > vQ > vP (c) vR/vP = 3 (d) vP/vQ = 1/2
Solution. Surface area 4A means radius 2R, so mass M for P gives Q: mass 8M and radius 2R. For R: mass 9M and radius 91/3R.
With ve = √(2GM/R): (ve)P = √(2GM/R); (ve)Q = √(2G·8M/2R) = 2(ve)P; (ve)R = √(2G·9M/(91/3R)) = 91/3(ve)P ≈ 2.08(ve)P.
So vR > vQ > vP and vP/vQ = 1/2.
Correct options: (b) and (d).
Teacher's Note: Equal density means mass ∝ R³, so escape speed v = R√(8πGρ/3) is proportional to R.
Exam Note: With equal density, escape speed is simply proportional to radius.
Question 2.1.19. A metal rod of length L and mass m is pivoted at one end. A thin disc of mass M and radius R (< L) is attached at its centre to the free end of the rod. Consider the two ways the disc is attached. Case A: the disc is not free to rotate about its centre. Case B: the disc is free to rotate about its centre. The rod–disc system performs SHM in a vertical plane after being released from the same displaced position. Which of the following statements is/are true?
(a) Restoring torque in Case A = restoring torque in Case B
(b) Restoring torque in Case A < restoring torque in Case B
(c) Angular frequency in Case A > angular frequency in Case B
(d) Angular frequency in Case A < angular frequency in Case B
Solution. Case A: mg(L/2)sin θ + MgL sin θ = ((1/3)mL² + (1/2)MR² + ML²)αA.
Case B: mg(L/2)sin θ + MgL sin θ = ((1/3)mL² + ML²)αB.
The restoring torque is the same in both cases (τA = τB), but the moment of inertia is larger in Case A, so ωA < ωB.
Correct options: (a) and (d).
Teacher's Note: A freely rotating disc keeps its own spin axis fixed, so only its translation inertia ML² counts.
Exam Note: Same torque, bigger inertia gives lower frequency.
Question 2.1.20. A thin ring of mass 2 kg and radius 0.5 m is rolling without slipping on a horizontal plane with velocity 1 m s−1. A small ball of mass 0.1 kg moving with velocity 20 m s−1 in the opposite direction hits the ring at a height of 0.75 m and goes vertically up with a velocity of 10 m s−1. Immediately after the collision
(a) the ring has pure rotation about the stationary CM
(b) the ring comes to a complete stop
(c) friction between the ring and the ground is to the left
(d) there is no friction between the ring and the ground
Solution. During the collision friction is impulsive, and soon after the collision the ring has a clockwise angular velocity, so friction acts towards the left.
Correct option: (c).
(Key and book solution: (c).)
Teacher's Note: The ball transfers horizontal impulse to the ring, leaving it with slipping; friction then opposes slip.
Exam Note: Compare v with ωR after impact to find friction direction.
Question 2.1.21. Two spherical bodies, each of mass M, are kept with their centres at a distance 2L apart. A particle of mass m is projected from the mid-point of the line joining their centres, perpendicular to the line. The gravitational constant is G. Which of the following statements is/are true?
(a) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 4√(GM/L).
(b) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is 2√(GM/L).
(c) The minimum initial velocity of the mass m to escape the gravitational field of the two bodies is √(2GM/L).
(d) The total mechanical energy of the mass m remains constant.
Solution. At the mid-point, potential energy of m = −2GMm/L. For escape, ½mv² − 2GMm/L = 0, so v = 2√(GM/L): (b).
The gravitational field is conservative, so the total mechanical energy (KE + PE) of m remains constant throughout its flight: (d).
Correct options: (b) and (d).
Teacher's Note: Escape needs total energy zero; potential at midpoint is the sum from both masses.
Exam Note: Add potentials of both bodies, then set E = 0.
Question 2.1.22. A spherical body of radius R consists of a fluid of constant density and is in equilibrium under its own gravity. If p(r) is the pressure at r (r < R) then the correct option(s) is/are
(a) p(r = 0) = 0 (b) p(r = 3R/4)/p(r = 2R/3) = 63/80
(c) p(r = 3R/5)/p(r = 2R/5) = 16/21 (d) p(r = R/2)/p(r = R/3) = 20/27
Solution. Gravitational field at distance r from the centre: E = G(4/3)πr³ρ/r² = (4/3)πGρr. The force on a concentric shell of radius r and thickness dr is dF = E·4πr²dr·ρ, so dp = dF/(4πr²) = Eρ dr.
Integrating from R to r (p = 0 at the surface): p = (K/2)(R² − r²) = A(1 − r²/R²), where A is a constant.
r/R: 0 gives A; 1/2 gives 3A/4; 1/3 gives 8A/9; 2/3 gives 5A/9; 2/5 gives 21A/25; 3/5 gives 16A/25; 3/4 gives 7A/16.
Hence (a) is false (p(0) = A); (b) (7/16)/(5/9) = 63/80 is true; (c) (16/25)/(21/25) = 16/21 is true; (d) (3/4)/(8/9) = 27/32 ≠ 20/27, false.
Correct options: (b) and (c).
Teacher's Note: Integrate dp = ρE dr from the surface where pressure is zero; p = A(1 − r²/R²).
Exam Note: Pressure is maximum at the centre, not zero.
Question 2.1.23. While plotting stress versus strain curves for two materials P and Q, a student by mistake puts strain on the y-axis and stress on the x-axis as shown in the figure. Which of the following statements is/are correct?
(a) P has more tensile strength than Q.
(b) P is more ductile than Q.
(c) P is more brittle than Q.
(d) The Young modulus of P is more than that of Q.
(Figure: strain on the vertical axis, stress on the horizontal axis. Both curves start at the origin; curve Q ends earlier, at a smaller stress and smaller strain; curve P rises with a bump and extends to a larger stress and larger strain.)
Solution. From the graph, the breaking stress of P is more than that of Q, so P has more tensile strength. P also reaches a much larger strain before breaking, so P is more ductile than Q.
Strain = (1/Y)·stress, so the slope of the plotted curve is 1/Y; P's curve is steeper, so YP < YQ.
Correct options: (a) and (b).
Teacher's Note: Axes swapped: slope of the plotted line is 1/Y, so steeper means smaller Young modulus.
Exam Note: Read the axes first; slope gives 1/Y here.
Question 2.1.24. Two independent harmonic oscillators of equal mass are oscillating about the origin with angular frequencies ω1 and ω2 and have total energies E1 and E2 respectively. The variations of their momenta p with positions x are shown in the figure. If a/b = n² and a/R = n then the correct equation(s) is/are
(a) E1ω1 = E2ω2 (b) ω2/ω1 = n² (c) ω1ω2 = n² (d) E1/ω1 = E2/ω2
(Figure: the first oscillator's p–x curve (energy E1) is an ellipse with semi-axis a along x and b along p; the second (energy E2) is a circle of radius R.)
Solution. First oscillator: the maximum momentum is b = mω1a (taking a as the amplitude).
The book's working: b = maω1, so a/b = 1/(mω1) = n². Second oscillator: the p–x curve is a circle, so R = mω2R and 1/(mω2) = 1, giving ω2/ω1 = n².
E1 = ½mω1²a² and E2 = ½mω2²R². So E1/E2 = (ω1/ω2)²·n² = (ω1/ω2)²(ω2/ω1) = ω1/ω2, so E1/ω1 = E2/ω2.
Correct options: (b) and (d).
Teacher's Note: Phase-space ellipse semi-axes are x-amplitude and mω times it; compare with the circle.
Exam Note: Energy over frequency is the adiabatic invariant here.
Question 2.1.25. A block of mass M is connected by a massless spring with stiffness constant K to a rigid wall and moves without friction on a horizontal surface. The block oscillates with a small amplitude A about an equilibrium position x0. Consider two cases: (i) when the block is at x0, and (ii) when the block is at x = x0 + A. In both the cases, a particle of mass m (< M) is gently placed on the block after which they stick to each other. Which of the following statements is/are true about the motion after the mass m is placed on the mass M?
(a) The amplitude of oscillation in the first case changes by a factor of √(M/(M + m)), whereas in the second case it remains unchanged.
(b) The final time period of oscillation in both the cases is same.
(c) The total energy decreases in both the cases.
(d) The instantaneous speed at x0 of the combined masses decreases in both the cases.
Solution. ω = √(K/M) before, ω′ = √(K/(M + m)) after.
Case (i): m is placed at the mean position. Momentum conservation: Mv0 = (M + m)v′, so MωA = (M + m)ω′A′, giving A′/A = (M/(M + m))(ω/ω′) = √(M/(M + m)).
Case (ii): at the extreme position the speed is zero before and after, so the extreme and mean positions are unchanged and A′ = A.
T′ = 2π/ω′ is the same in both cases. Energy decreases in case (i) but not in case (ii), so (c) is false.
The speed at the mean position ω′A′ decreases in both cases.
Correct options: (a), (b) and (d).
Teacher's Note: Adding mass at the mean position loses energy; at the extreme position it loses none.
Exam Note: Momentum is conserved at x₀; at the extreme the speed is zero.
Question 2.1.26. A solid cylinder of mass m and radius r is rolling on a rough inclined plane of inclination θ. The coefficient of friction between the cylinder and the incline is μ. Then
(a) frictional force is always μmg cos θ
(b) friction is a dissipative force
(c) by decreasing θ, frictional force decreases
(d) friction opposes translation and supports rotation
Solution. Friction acts up the slope, so it supports rotation and opposes translation.
For a rolling body aCM = g sin θ/(1 + K²/R²) = (2/3)g sin θ.
Friction f = mg sin θ/(1 + R²/K²) = (1/3)mg sin θ, so f decreases when θ decreases (and it is not μmg cos θ, since the cylinder is not slipping).
For pure rolling there is no energy dissipation since there is no slipping.
Correct options: (c) and (d).
Teacher's Note: In pure rolling friction is static: f = mg sin θ/3 for a solid cylinder, below μmg cos θ.
Exam Note: Static friction does no net work in pure rolling.
Question 2.1.27. A ball moves on a fixed track as shown in the figure. From A to B, the ball rolls without slipping. Surface BC is frictionless. KA, KB and KC are kinetic energies of the ball at A, B and C respectively. Then
(a) hA > hC; KB > KC (b) hA > hC; KC > KA
(c) hA = hC; KB = KC (d) hA < hC; KB > KC
(Figure: a curved track in the shape of a bowl. The ball is at A on the left rim (height hA), at B at the bottom and at C on the right side (height hC); the left part AB is rough, the right part BC frictionless.)
Solution. Mechanical energy is conserved, so EA = EB = EC, i.e. KA + mghA = KB = KC + mghC. Hence KB > KA and KB > KC.
Also EA − EC = 0 gives mg(hA − hC) = KC − KA. For KB, only the translational part gets converted into potential energy at C (rotational energy stays because BC is frictionless), so hA > hC and KC > KA.
Corrected: the correct options are (a) and (b). The printed answer key also lists (d), but (d) (hA < hC) contradicts (a) and the derivation above.
Teacher's Note: On the smooth part the spin energy cannot be converted, so the ball stops below its starting height.
Exam Note: Rotational KE stays locked on a frictionless section.
Question 2.1.28. If the resultant of all the external forces acting on a system of particles is zero then from an inertial frame, one can surely say that
(a) the linear momentum of the system does not change in time
(b) the kinetic energy of the system does not change in time
(c) the angular momentum of the system does not change in time
(d) the potential energy of the system does not change in time
Solution. ΣFext = dp/dt. When ΣFext = 0, the linear momentum p is conserved. Zero net force does not imply zero net torque, nor zero work by internal forces.
Correct option: (a).
Teacher's Note: Zero net force conserves momentum only; torque and internal work are separate matters.
Exam Note: Distinguish zero force from zero torque.
Question 2.1.29. A sphere is rolling without slipping on a fixed horizontal plane surface. In the figure, A is the point of contact, B is the centre of the sphere and C is its topmost point. Then,
(a) vC − vA = 2(vB − vC) (b) vC − vB = vB − vA
(c) |vC − vA| = 2|vB − vC| (d) |vC − vA| = 4|vB|
Solution. For rolling: vC = vCM + rω = 2vCM; vB = vCM and vA = 0.
So vC − vB = vCM = vB − vA; vC − vA = 2vCM; vB − vC = −vCM.
Correct options: (b) and (c).
Teacher's Note: Contact point is at rest, centre moves at v, top at 2v.
Exam Note: Use v = 0, v, 2v for A, B, C.
Question 2.1.30. Two spheres P and Q of equal radii have densities ρ1 and ρ2 respectively. The spheres are connected by a massless string and placed in liquids L1 and L2 of densities σ1 and σ2 and viscosities η1 and η2 respectively. They float in equilibrium with sphere P in L1 and sphere Q in L2, the string being taut (see the figure). If the sphere P alone in L2 has terminal velocity vP and the sphere Q alone in L1 has terminal velocity vQ then
(a) |vP|/|vQ| = η1/η2 (b) |vP|/|vQ| = η2/η1 (c) vP·vQ > 0 (d) vP·vQ < 0
(Figure: liquid L1 lies above liquid L2; P is in L1 and Q is in L2, joined by a vertical string.)
Solution. For the system to float: (ρ1 + ρ2)V g = (σ1 + σ2)V g, so ρ1 + ρ2 = σ1 + σ2. Since the string is taut, ρ1 < σ1 and ρ2 > σ2.
Terminal velocities: vP = (2/9)r²(σ2 − ρ1)g/η2 and vQ = (2/9)r²(σ1 − ρ2)g/η1.
Since σ2 − ρ1 = −(σ1 − ρ2), |vP|/|vQ| = η1/η2 and vP·vQ < 0 because they are in opposite directions.
Correct options: (a) and (d).
Teacher's Note: Equilibrium of the pair gives ρ₁+ρ₂ = σ₁+σ₂; Stokes terminal speed ∝ (density difference)/η.
Exam Note: Equal and opposite density differences flip direction, ratio is inverse of viscosities.
Question 2.1.31. A solid sphere of radius R and density ρ is attached to one end of a massless spring of force constant k. The other end of the spring is connected to another solid sphere of radius R and density 3ρ. The complete arrangement is placed in a liquid of density 2ρ and is allowed to reach equilibrium. Now, which of the following statements is/are correct?
(a) The net elongation of the spring is 4πR³ρg/(3k).
(b) The net elongation of the spring is 8πR³ρg/(3k).
(c) The lighter sphere is partly submerged.
(d) The lighter sphere is completely submerged.
Solution. Buoyant force on each sphere (fully submerged) FB = (4/3)πR³·2ρ·g. Weights: W1 = (4/3)πR³ρg and W2 = (4/3)πR³·3ρg.
Let T be the spring force. For equilibrium of the lighter sphere A: (4/3)πR³·2ρg = (4/3)πR³ρg + T, so T = (4/3)πR³ρg = kΔl, giving Δl = 4πR³ρg/(3k).
For the whole system, W1 + W2 = 2FB is true only when both spheres are completely submerged.
Correct options: (a) and (d).
Teacher's Note: Whole system: weights 4ρ-units equal 2 × buoyancy of 2ρ, so both are fully submerged.
Exam Note: Check total weight equals total buoyancy before assuming partial submersion.
Question 2.1.32. Two solid spheres A and B of equal volumes but of different densities dA and dB are connected by a string. They are fully immersed in a fluid of density dF. They get arranged into an equilibrium as shown in the figure with a tension in the string. The arrangement is possible only if
(a) dA < dF (b) dB > dF (c) dA > dF (d) dA + dB = 2dF
(Figure: sphere A is above sphere B, joined by a string; both are fully inside the fluid.)
Solution. Forces on the system: total buoyancy 2dFVg upward and total weight (dA + dB)Vg downward. For equilibrium with the string taut, the upper sphere A must be lighter than the fluid and the lower sphere B heavier.
So dA < dF, dB > dF and dA + dB = 2dF.
Correct options: (a), (b) and (d).
Teacher's Note: Taut string with A above B needs A to be buoyant and B to sink; the net force is zero.
Exam Note: Net force zero gives the sum of densities.
2.2 Heat and Thermodynamics
Question 2.2.1. A container of fixed volume has a mixture of one mole of hydrogen and one mole of helium in equilibrium at temperature T. Assuming the gases to be ideal, which of the following statements is/are correct?
(a) The average energy per mole of the gas mixture is 2RT.
(b) The ratio of the speed of sound in the gas mixture to that in the helium gas is √(6/5).
(c) The ratio of the rms speed of helium atoms to that of the hydrogen molecules is 1/2.
(d) The ratio of the rms speed of helium atoms to that of the hydrogen molecules is 1/√2.
Solution. Total internal energy U = U1 + U2 = (nCVT)1 + (nCVT)2 = (5/2)RT + (3/2)RT = 4RT. Average energy per mole = 4RT/2 = 2RT: (a) is correct.
The mixture has two moles with U = 4RT, so 2(CV)mixT = 4RT, giving (CV)mix = 2R and γmix = 3/2. The molar mass of the mixture is 3 g, that of He is 4 g. Speed of sound c = √(γRT/M): cmix/cHe = √((3/2)/(5/3) × 4/3) = √(6/5): (b) is correct.
(vrms)He/(vrms)H₂ = √(MH₂/MHe) = √(2/4) = 1/√2: (d) is correct (and (c) is not).
Correct options: (a), (b) and (d).
Teacher's Note: Mix: U = 4RT for two moles gives CV = 2R; sound speed uses γ/M of the mixture.
Exam Note: Find γ of the mixture before comparing sound speeds.
Question 2.2.2. An ideal monatomic gas is confined in a horizontal cylinder by a spring-loaded piston (as shown in the figure). Initially the gas is at temperature T1, pressure p1 and volume V1 and the spring is in its relaxed state. The gas is then heated very slowly to temperature T2, pressure p2 and volume V2. During this process the piston moves out by a distance x. Now, which of the following statements is/are correct? (Ignore the friction between the piston and the cylinder.)
(a) If V2 = 2V1 and T2 = 3T1 then the energy stored in the spring is (1/4)p1V1.
(b) If V2 = 2V1 and T2 = 3T1 then the change in internal energy is 3p1V1.
(c) If V2 = 3V1 and T2 = 4T1 then the work done by the gas is (7/3)p1V1.
(d) If V2 = 3V1 and T2 = 4T1 then the heat supplied to the gas is (17/6)p1V1.
(Figure: a horizontal cylinder with the gas on the left and a piston on the right attached to a spring that is fixed to the right end wall; the outside pressure is p0 = p1.)
Solution. The gas pressure is p = p1 + Kx/A (outside pressure p0 = p1 because the spring is relaxed initially).
For V2 = 2V1, T2 = 3T1: p2V2/(p1V1) = 3 gives p2 = (3/2)p1, and x = V1/A. Then (3/2)p1 = p1 + Kx/A, so Kx = p1A/2. Energy stored in the spring = ½Kx·x = ½(p1A/2)(V1/A) = (1/4)p1V1: (a) correct.
ΔU = (f/2)(p2V2 − p1V1) = (3/2)(3p1V1 − p1V1) = 3p1V1: (b) correct.
For V2 = 3V1, T2 = 4T1: p2 = (4/3)p1, Kx = (p1/3)A, x = 2V1/A. Wgas = Watm + Wspring = p1Ax + ½Kx² = p1·2V1 + ½(p1A/3)(2V1/A) = (7/3)p1V1: (c) correct.
Heat supplied ΔQ = W + ΔU = (7/3)p1V1 + (3/2)(p2V2 − p1V1) = (7/3 + 9/2)p1V1 = (41/6)p1V1, so (d) (17/6) is incorrect.
Correct options: (a), (b) and (c).
Teacher's Note: Gas work = atmosphere work + spring energy; ΔU = (3/2)Δ(pV) for a monatomic gas.
Exam Note: Q = W + ΔU; add each part separately.
Question 2.2.3. The variation of specific heat capacity (C) of a solid as a function of temperature (T) is shown in the figure. The temperature is increased continuously from 0 to 500 K at a constant rate. Ignoring any volume change, find which of the following statements is/are correct to a reasonable approximation.
(a) The rate at which heat is absorbed in the range 0–100 K varies linearly with temperature.
(b) Heat absorbed in increasing the temperature from 0 to 100 K is less than the heat required for increasing the temperature from 400 to 500 K.
(c) There is no change in the rate of heat absorption in the range 400–500 K.
(d) The rate of heat absorption increases in the range 200–300 K.
(Figure: C against T (K), with T marked at 100, 200, 300, 400 and 500 K. C rises from zero, linearly at first, then more slowly, and flattens to a constant dashed level beyond about 400 K.)
Solution. The graph between 0 and 100 K is linear, so C ∝ T and the rate of heat absorption (dQ/dt = mC dT/dt at constant heating rate) varies linearly: (a) correct.
The area under the C–T curve is proportional to the heat absorbed, and the area for 0–100 K is smaller than for 400–500 K: (b) correct.
Beyond 400 K the curve is parallel to the T axis with constant C, so the rate of heat absorption is constant: (c) correct.
The value of C increases with temperature in the range 200–300 K, so the rate of heat absorption increases: (d) correct.
Correct options: (a), (b), (c) and (d).
Teacher's Note: At a steady heating rate dQ/dt ∝ C, and heat absorbed is the area under C–T.
Exam Note: Rate of absorption follows C; total heat is the area.
Question 2.2.4. A human body has a surface area of approximately 1 m². The normal body temperature is 10 K above the surrounding room temperature T0. Take the room temperature T0 to be 300 K. For T0 = 300 K, the value of σT04 = 460 W m−2 (where σ is the Stefan–Boltzmann constant). Which of the following options is/are correct?
(a) The amount of energy radiated by the body in 1 second is close to 60 J.
(b) If the surrounding temperature reduces by a small amount ΔT0 ≪ T0 then to maintain the same body temperature the same (living) human being needs to radiate ΔW = 4σT03ΔT0 more energy per unit time.
(c) Reducing the exposed surface area of the body (e.g., by curling up) allows humans to maintain the same body temperature by reducing the energy lost by the body.
(d) If the body temperature rises significantly then the peak in the spectrum of electromagnetic radiation emitted by the body would shift to longer wavelengths.
Solution. Net heat radiated per second: Q = σA(T⁴ − T0⁴) = σA[(T0 + ΔT0)⁴ − T0⁴] ≈ σA·4T0³ΔT0 = A(σT0⁴)(4ΔT0/T0) = (1 m²)(460 W m−2)(4 × 10/300) = 61.3 J ≈ 60 J: (a) correct.
If the room temperature falls by ΔT0 (body temperature fixed), the extra power radiated is Q2 − Q1 = σ[T⁴ − (T0 − ΔT0)⁴] − σ[T⁴ − T0⁴] ≈ 4σT0³ΔT0: (b) correct.
The net heat radiated is Q = σA(T⁴ − T0⁴); if the exposed area is reduced the heat loss falls, so the body temperature can be maintained: (c) correct.
By Wien's law λmT = constant, so a rise in body temperature shifts the peak towards shorter wavelengths: (d) incorrect.
Correct options: (a), (b) and (c).
Teacher's Note: Expand (T₀+ΔT)⁴ to first order; use Wien's law λmT = constant for the peak shift.
Exam Note: Hotter bodies peak at shorter wavelengths.
Question 2.2.5. A composite block is made of slabs A, B, C, D and E of different thermal conductivities (given in terms of a constant K) and sizes (given in terms of length L) as shown in the figure. All slabs are of the same width. Heat Q flows only from left to right through the blocks. Then in the steady state,
(a) heat flow through slabs A and E are same
(b) heat flow through slab E is maximum
(c) temperature difference across slab E is smallest
(d) heat flow through C = heat flow through B + heat flow through D
(Figure: heat enters from the left. Slab A (conductivity 2K, length L, from 0 to 1L) spans the full height; then three slabs in parallel from 1L to 5L (length 4L): B (3K) on top, C (4K) in the middle and D (5K) at the bottom; then slab E (6K, length L, from 5L to 6L) spans the full height. The book's solution takes the areas as 4A for A and E, and A, 2A, A for B, C, D.)
Solution. The system has three parts in series (A; B, C, D in parallel; E). With the areas above, the thermal resistances are RA = L/(2K·4A) = L/(8KA), RB = 4L/(3KA), RC = 4L/(4K·2A) = L/(2KA), RD = 4L/(5KA), RE = L/(6K·4A) = L/(24KA).
Since the three parts are in series, the thermal current H through A and E is the same: (a) correct and (b) wrong.
Temperature differences: ΔθA = HRA = HL/(8KA); the current splits as 3H/16 through B, H/2 through C, 5H/16 through D, giving ΔθB = ΔθC = ΔθD = HL/(4KA); and ΔθE = HRE = HL/(24KA). So ΔθE is the smallest: (c) correct.
IC = H/2, IB = 3H/16, ID = 5H/16, so IC = IB + ID: (d) correct.
Correct options: (a), (c) and (d).
Teacher's Note: Series parts carry equal heat current; parallel slabs share it in proportion to K·A/length.
Exam Note: Equal current in A and E; smallest resistance gives smallest temperature drop.
Question 2.2.6. In a dark room with ambient temperature T0, a black body is kept at a temperature T. Keeping the temperature of the black body constant (at T), sunrays are allowed to fall on the black body through a hole in the roof of the dark room. Assuming that there is no change in the ambient temperature of the room, which of the following statements is/are true?
(a) The quantity of radiation absorbed by the black body in unit time will increase.
(b) Since emissivity = absorptivity, the quantity of radiation emitted by the black body in unit time will increase.
(c) The black body radiates more energy in unit time in the visible spectrum.
(d) The reflected energy in unit time by the black body remains the same.
Solution. Sunrays falling on the black body lead to more absorption of radiation: (a) is true. Since the temperature remains constant, the black body also emits more radiation (to keep the same temperature): (b) is true.
Sunlight is white light, comprising the visible spectrum (red to violet), so the body radiates more energy in the visible spectrum: (c) is true. A black body reflects nothing before or after, so the reflected energy remains the same (zero): (d) is true.
Correct options: (a), (b), (c) and (d) (as in the answer key; the printed solution text lists only (b), (c), (d) but (a) is evidently true).
Teacher's Note: Black body absorbs the extra sunlight; at fixed T it must re-emit it, so more visible output.
Exam Note: A perfect absorber reflects nothing, so reflection is unchanged.
Question 2.2.7. CV and Cp denote the molar heat capacities of a gas at constant volume and constant pressure respectively. Then,
(a) Cp − CV is larger for a diatomic ideal gas than for a monatomic ideal gas
(b) Cp + CV is larger for a diatomic ideal gas than for a monatomic ideal gas
(c) Cp/CV is larger for a diatomic ideal gas than for a monatomic ideal gas
(d) Cp·CV is larger for a diatomic ideal gas than for a monatomic ideal gas
Solution. Monatomic: CV = 3R/2, Cp = 5R/2, Cp − CV = R, Cp + CV = 4R, Cp/CV = 5/3, CpCV = 15R²/4.
Diatomic: CV = 5R/2, Cp = 7R/2, Cp − CV = R, Cp + CV = 6R, Cp/CV = 7/5, CpCV = 35R²/4.
So the sum and product are larger for the diatomic gas; the difference is equal and the ratio is smaller.
Correct options: (b) and (d).
Teacher's Note: Tabulate CV, Cp for 3 and 5 degrees of freedom; γ falls as degrees of freedom rise.
Exam Note: Cp − CV = R for every ideal gas.
Question 2.2.8. The figure shows the p–V plot of an ideal gas taken through a cycle ABCDA. The part ABC is a semicircle and CDA is half of an ellipse. Then,
(a) the process during the path A → B is isothermal
(b) heat flows out of the gas during the path B → C → D
(c) work done during the path A → B → C is zero
(d) positive work is done by the gas in the cycle ABCDA
(Figure: p against V with gridlines at p = 1, 2, 3 and V = 1, 2, 3. A closed loop traversed clockwise: A at (V = 2, p = 3) at the top, B at (3, 2) on the right, C at (2, 1) at the bottom, D at (1, 2) on the left; ABC is the right semicircle and CDA the left half-ellipse.)
Solution. The process A → B is part of a semicircle, so it cannot be isothermal; for an isothermal process the path should be a rectangular hyperbola.
In the process B → C → D the gas undergoes compression, the work done by the gas is negative (ΔW < 0), hence heat is expelled (flows out): (b) is correct.
The work done during A → B → C is the area under the semicircle (∫p dV), which is not zero.
For the clockwise cycle A → B → C → D → A, the work done by the gas is positive: (d) is correct.
Correct options: (b) and (d).
Teacher's Note: Isotherms are hyperbolas, not circles; clockwise p–V loop means net positive work.
Exam Note: Clockwise loop: net work positive.
2.3 Sound Waves
Question 2.3.1. A horizontally stretched string fixed at two ends is vibrating in its fifth harmonic according to the equation y(x, t) = (0.01 m) sin[(62.8 m−1)x] cos[(628 s−1)t]. Assuming π = 3.14, which of the following statements is/are correct?
(a) The number of nodes is 5.
(b) The length of the string is 0.25 m.
(c) The maximum displacement of the mid-point of the string from its equilibrium position is 0.01 m.
(d) The fundamental frequency is 100 Hz.
Solution. Comparing with the standing wave y = A sin(2πx/λ)cos(ωt): A = 0.01 m and 2π/λ = 62.8 m−1 = 20π m−1, so λ/2 = 1/20 m = 5 cm.
In the fifth harmonic the length of the string is L = 5λ/2 = 25 cm = 0.25 m: (b) correct. There are 6 nodes (including both ends), so (a) is wrong.
The mid-point of the string (x = 0.125 m) is an antinode in this mode: sin(62.8 × 0.125) = sin(7.85) = sin(5π/2) = 1, so its maximum displacement is A = 0.01 m: (c) correct.
Angular frequency of this mode ω = 628 s−1 = 2πν, so ν = 100 Hz is the fifth harmonic; the fundamental frequency = 100/5 = 20 Hz, so (d) is wrong.
Correct options: (b) and (c).
Teacher's Note: Read λ from the wavenumber; for N loops L = Nλ/2, with N + 1 nodes including the ends.
Exam Note: Fifth harmonic means fundamental = f/5.
Question 2.3.2. Two loudspeakers M and N are located 20 m apart and emit sound at frequencies 118 Hz and 121 Hz respectively. A car is initially at a point P, 1800 m away from the mid-point Q of the line MN, and moves towards Q constantly at 60 km h−1 along the perpendicular bisector of MN. It crosses Q and eventually reaches the point R, 1800 m away from Q. Let v(t) represent the beat frequency measured by a person sitting in the car at time t. Let vP, vQ and vR be the beat frequencies measured at locations P, Q and R respectively. The speed of sound in air is 330 m s−1. Which of the following statements is/are true regarding the sound heard by the person?
(a) Figure A represents schematically the variation of the beat frequency with time.
(b) Figure B represents schematically the variation of beat frequency with time.
(c) The rate of change of beat frequency is maximum when the car passes through Q.
(d) vP + vR = 2vQ
(Figure A: v(t) falls from vP at P to vR at R, passing through the level vQ at Q, with a steep, S-shaped slope that is greatest at Q and flattens near P and R. Figure B: v(t) falls from P, flattens out near the level vQ around Q, and then drops again towards R, i.e. the slope is smallest at Q.)
Solution. Let the car (speed V0) be at an angle position θ from the line along the car's motion. Beat frequency:
(i) At P: vP = (121 − 118)(V + V0cos α)/V = 3(V + V0cos α)/V Hz.
(ii) At Q: vQ = 121 − 118 = 3 Hz.
(iii) At R: vR = 3(V − V0cos α)/V Hz. Hence vP + vR = 2vQ: (d) correct.
At any position θ the beat frequency is v(θ) = 3(V + V0cos θ)/V Hz, so dv/dθ = −3(V0/V)sin θ. At Q, sin θ = sin 90° = 1 (maximum), so the rate of change of beat frequency with time is maximum at Q: (c) correct, and the curve of Figure A (steepest at Q) is the right one: (a) correct.
Correct options: (a), (c) and (d).
Teacher's Note: Beat frequency = difference of Doppler-shifted frequencies, depending on the cosine of the angle to each speaker.
Exam Note: Slope of v(t) peaks at Q.
Question 2.3.3. Two vehicles, each moving with speed u on the same horizontal straight road, are approaching each other. Wind blows along the road with velocity w. One of these vehicles blows a whistle of frequency f1. An observer in the other vehicle hears the frequency of the whistle to be f2. The speed of sound in still air is v. Identify the correct statement(s).
(a) If the wind blows from the observer to the source then f2 > f1.
(b) If the wind blows from the source to the observer then f2 > f1.
(c) If the wind blows from the observer to the source then f2 < f1.
(d) If the wind blows from the source to the observer then f2 < f1.
Solution. Apparent frequency, wind from the source to the observer: f2 = ((v + w + u)/(v + w − u))f1.
Wind from the observer to the source: f2 = ((v − w + u)/(v − w − u))f1.
In both cases the numerator exceeds the denominator, so f2 > f1 (approaching vehicles).
Correct options: (a) and (b).
Teacher's Note: Wind only changes the effective sound speed; approaching source and observer always raise the frequency.
Exam Note: Approaching means higher frequency, always.
Question 2.3.4. A block M hangs vertically from the bottom end of a uniform rope of constant mass per unit length. The top end of the rope is attached to a fixed rigid support at O. A transverse wave pulse (Pulse 1) of wavelength λO is produced at point O on the rope. The pulse takes time TOA to reach point A. If the wave pulse of wavelength λO is produced at point A (Pulse 2) without disturbing the position of M, it takes time TAO to reach the point O. Which of the following options is/are correct?
(a) The time TAO = TOA.
(b) The velocities of the two pulses (Pulse 1 and Pulse 2) are the same at the mid-point of the rope.
(c) The wavelength of Pulse 1 becomes longer when it reaches point A.
(d) The velocity of any pulse along the rope is independent of its frequency and wavelength.
(Figure: a vertical rope from the ceiling at O down to the block M at A; Pulse 1 travels down from O and Pulse 2 travels up from A.)
Solution. The speed v = √(F/μ) depends on the tension F and the mass per unit length μ at that point; the speed is the same at any given point for both pulses, hence TAO = TOA: (a) and (b) correct.
Since v = fλ and the frequency stays constant, λ ∝ v. Going from O to A the tension F decreases, so v decreases and λ decreases; option (c) is incorrect.
v depends on F and μ and is independent of f and λ: (d) correct.
Correct options: (a), (b) and (d).
Teacher's Note: Wave speed is √(tension/μ) at each point, independent of direction, frequency and wavelength.
Exam Note: Speed depends on tension, not direction.
Question 2.3.5. One end of a taut string of length 3 m along the x-axis is fixed at x = 0. The speed of the waves in the string is 100 m s−1. The other end of the string is vibrating in the y-direction so that stationary waves are set up in the string. The possible waveform(s) of these stationary waves is/are
(a) y(t) = A sin(πx/6) cos(50πt/3) (b) y(t) = A sin(πx/3) cos(100πt/3)
(c) y(t) = A sin(5πx/6) cos(250πt/3) (d) y(t) = A sin(5πx/2) cos(250πt)
Solution. The fixed end is a node (x = 0) and the vibrating end at x = 3 m is an antinode, so l = (2n + 1)λ/4, i.e. λ = 12/(2n + 1) m.
k = 2π/λ = (2n + 1)π/6 and ω = vk = (2n + 1)·50π/3.
For n = 0: k = π/6 and ω = 50π/3: waveform (a). For n = 2: k = 5π/6 and ω = 250π/3: waveform (c). For n = 7: k = 5π/2 and ω = 250π: waveform (d). Waveform (b) (k = π/3) would need n = 1/2, which is impossible.
Correct options: (a), (c) and (d).
Teacher's Note: Node at one end and antinode at the other gives odd multiples of a quarter wavelength.
Exam Note: Match k = (2n+1)π/6 and check ω = vk.
Question 2.3.6. A student is performing an experiment using a resonance column and a tuning fork of frequency 244 s−1. He is told that the air in the tube has been replaced by another gas (assume that the column remains filled with the gas). If the minimum height at which resonance occurs is (0.350 ± 0.005) m, the gas in the tube is (useful information: √(167RT) = 640 J1/2 mol−1/2; √(140RT) = 590 J1/2 mol−1/2; the molar mass M in grams is given in each option; take the value of √(10/M) for each gas as given there)
(a) neon (M = 20, √(10/20) = 7/20) (b) nitrogen (M = 28, √(10/28) = 3/5)
(c) oxygen (M = 32, √(10/32) = 9/16) (d) argon (M = 36, √(10/36) = 17/32)
Solution. v = √(γp/ρ) = √(γRT/M), and v = fλ = f·4l, so l = (1/4f)√(γRT/M).
Using the given data: neon (monatomic, 640 × 0.7)/(4 × 244) ≈ 0.459 m (the book uses √(10/20) ≈ 7/10 although the option prints 7/20); nitrogen 590 × (3/5)/976 = 0.363 m; oxygen 590 × (9/16)/976 = 0.340 m; argon 640 × (17/32)/976 = 0.348 m.
As l = (0.350 ± 0.005) m, only argon (0.348 m) fits.
Correct option: (d).
Teacher's Note: Quarter-wave column: l = v/(4f) with v = √(γRT/M); compare each gas with 0.345–0.355 m.
Exam Note: Use γ = 5/3 for monatomic, 7/5 for diatomic gases.
Question 2.3.7. A person blows into the open end of a long pipe. As a result, a high-pressure pulse of air travels down the pipe. When this pulse reaches the other end of the pipe
(a) a high-pressure pulse starts travelling up the pipe, if the other end of the pipe is open
(b) a low-pressure pulse starts travelling up the pipe, if the other end of the pipe is open
(c) a low-pressure pulse starts travelling up the pipe, if the other end of the pipe is closed
(d) a high-pressure pulse starts travelling up the pipe, if the other end of the pipe is closed
Solution. At a rigid boundary (closed end) the particles cannot vibrate (displacement node, pressure antinode), so the reflected pressure wave has the same phase as the incident wave: a compression pulse is reflected as a compression pulse.
At the open end the particles vibrate with increased amplitude (displacement antinode, pressure node); the reflected pressure wave interferes destructively with the incident wave, so a phase change of π occurs and a high-pressure pulse is reflected as a low-pressure (rarefaction) pulse.
Correct options: (b) and (d).
Teacher's Note: Closed end reflects pressure in phase; open end reflects with a π pressure phase change.
Exam Note: Open end: compression returns as rarefaction.
Question 2.3.8. Function X = A sin²αx + B cos²αx + C sin αx cos αx represents SHM
(a) for any value of A, B and C (except C = 0)
(b) if A = −B, C = 2B, amplitude = |B√2|
(c) if A = B, C = 0
(d) if A = B, C = 2B, amplitude = |B|
Solution. X = (A/2)(1 − cos 2αx) + (B/2)(1 + cos 2αx) + (C/2) sin 2αx = ½(A + B) + ½(B − A)cos 2αx + (C/2) sin 2αx, which is SHM about a displaced mean for any A, B, C (with C ≠ 0): (a) correct.
For A = −B, C = 2B: X = B cos 2αx + B sin 2αx, SHM with amplitude √2·B: (b) correct.
For A = B, C = 0: X = A, constant, not SHM: (c) wrong.
For A = B, C = 2B: X = B + B sin 2αx, SHM about a displaced origin with amplitude B: (d) correct.
Correct options: (a), (b) and (d).
Teacher's Note: Reduce to a constant plus cos and sin of 2αx; amplitude = √(a² + b²) of the oscillating part.
Exam Note: Constant X is not SHM; amplitude excludes the shifted mean.
Question 2.3.9. A student performed the experiment to measure the speed of sound in air using resonance air-column method. Two resonances in the air column were obtained by lowering the water level. The resonance with the shorter air column is the first resonance and that with the longer air column is the second resonance. Then,
(a) the intensity of the sound heard at the first resonance was more than that at the second resonance
(b) the prongs of the tuning fork were kept in a horizontal plane above the resonance tube
(c) the amplitude of vibration of the ends of the prongs is typically around 1 cm
(d) the length of the air column at the first resonance was somewhat shorter than 1/4th of the wavelength of the sound in air
Solution. The first resonance is more intense than the second resonance. The prongs are kept vertically (not horizontally) to produce longitudinal vibration in the air column.
For the first resonance l1 + e = λ/4, where e is the end correction, so l1 is slightly shorter than λ/4.
Correct options: (a) and (d).
Teacher's Note: Air column plus end correction equals λ/4; the first resonance is the loudest.
Exam Note: Mention end correction to explain why l₁ is below λ/4.
2.4 Electrostatics
Question 2.4.1. A few electric field lines for a system of two charges Q1 and Q2 fixed at two different points on the x-axis are shown in the figure. These lines suggest that
(a) |Q1| > |Q2| (b) |Q1| < |Q2|
(c) at a finite distance to the left of Q1 the electric field is zero
(d) at a finite distance to the right of Q2 the electric field is zero
(Figure: Q1 on the left and Q2 on the right on the x-axis. Many lines leave Q1 in all directions; some curve around and end on Q2, while the rest go off to infinity on the left side.)
Solution. Q1 is positive and Q2 is negative, with |Q1| > |Q2|: lines of force start from a positive charge and end on a negative charge, and are denser near a larger charge (more lines leave Q1 than end on Q2, so some run off to infinity).
To the right of Q2 (the smaller, negative charge) the two fields oppose and can cancel at a finite distance, so a neutral point exists there. To the left of Q1, the larger charge, the fields never cancel.
Correct options: (a) and (d).
Teacher's Note: Field lines start on positive charge and end on negative; the larger charge sends out more lines.
Exam Note: A null point lies outside the pair, nearer the smaller charge.
Question 2.4.2. A spherical metal shell A of radius RA and a solid metal sphere B of radius RB (< RA) are kept far apart and each is given charge +Q. If they are connected by a thin metal wire then
(a) EAinside = 0 (b) QA > QB (c) σA/σB = RB/RA (d) EAon surface < EBon surface
Solution. After connection both are at a common potential V: kQA/RA = kQB/RB = k·2Q/(RA + RB). So QA/QB = RA/RB > 1, i.e. QA > QB: (b).
σARA²/(σBRB²) = RA/RB, so σA/σB = RB/RA: (c).
The field in the cavity of the metallic shell is zero: (a). On the surface EA/EB = (QA/QB)(RB²/RA²) = (RA/RB)(RB²/RA²) = RB/RA < 1, so EA < EB: (d).
Correct options: (a), (b), (c) and (d).
Teacher's Note: Connected conductors share one potential, so charge divides in proportion to radius; smaller sphere has larger surface field.
Exam Note: Equal potential: Q ∝ R, σ ∝ 1/R, surface E ∝ 1/R.
Question 2.4.3. Two nonconducting spheres of radii R1 and R2 and carrying uniform volume charge densities +ρ and −ρ respectively are placed such that they partially overlap, as shown in the figure. At all points in the overlapping region,
(a) the electrostatic field is zero
(b) the electrostatic potential is constant
(c) the electrostatic field is constant in magnitude
(d) the electrostatic field has the same direction
(Figure: two overlapping circles; the left sphere (radius R1) carries +ρ and the right sphere (radius R2) carries −ρ; their centres C1 and C2 are a distance d apart; the shaded lens is the overlap.)
Solution. Take a point P in the overlap, with position vectors r1 from C1 and r2 from C2. The field at P is
E = k(4/3)πρ r1 + k(4/3)π(−ρ) r2 = k(4/3)πρ(r1 − r2) = k(4/3)πρ d = ρd/(3ε0), where d is the vector from C2 to C1 (the displacement between the centres).
This is a constant (uniform) field everywhere in the overlap, so it is constant in magnitude and parallel in direction.
Correct options: (c) and (d).
Teacher's Note: Superpose the interior fields (ρ/3ε₀)r of the two spheres; the position vectors subtract to the constant d.
Exam Note: Overlap region gives a uniform field ρd/3ε₀.
Question 2.4.4. A cubical region of side a has its centre at the origin. It encloses three fixed point charges: −q at (0, −a/4, 0), +3q at (0, 0, 0) and −q at (0, +a/4, 0). Choose the correct option(s).
(a) The net electric flux crossing the plane x = +a/2 is equal to the net electric flux crossing the plane x = −a/2.
(b) The net electric flux crossing the plane y = +a/2 is more than the net electric flux crossing the plane y = −a/2.
(c) The net electric flux crossing the entire region is q/ε0.
(d) The net electric flux crossing the plane z = +a/2 is equal to the net electric flux crossing the plane x = +a/2.
(Figure: a cube centred at the origin with the three charges −q, +3q, −q lying in a row along the y-axis.)
Solution. The positions of all the charges are symmetric about the planes x = ±a/2, so the net electric flux through them is the same: (a). The same is true for the planes y = ±a/2, so (b) is wrong.
By Gauss's law, φ = Σqinside/ε0 = (3q − q − q)/ε0 = q/ε0: (c).
By symmetry, the flux through z = +a/2 equals the flux through x = +a/2: (d).
Correct options: (a), (c) and (d).
Teacher's Note: Gauss's law gives total flux; symmetry of the charge row equalises opposite faces.
Exam Note: Total enclosed charge is +q; the x and z faces are equivalent.
Question 2.4.5. Two nonconducting solid spheres of radii R and 2R, having uniform volume charge densities ρ1 and ρ2 respectively, touch each other. The net electric field at a distance 2R from the centre of the smaller sphere, along the line joining the centres of the spheres, is zero. The ratio ρ1/ρ2 can be
(a) −4 (b) −32/25 (c) 32/25 (d) 4
(Figure: the small sphere (centre O1, radius R, density ρ1) touches the large sphere (centre O2, radius 2R, density ρ2) on its right. Point P2 lies on the line to the left of O1 at distance 2R, and P1 lies on the line on the other side, at distance 2R from O1 and inside the large sphere.)
Solution. At P1 (distance 2R from O1, inside the large sphere at distance R from O2): [1/(4πε0)]ρ1(4πR³/3)/(2R)² = ρ2R/(3ε0), the field due to the small sphere balancing the field inside the big one. This gives ρ1/ρ2 = 4.
At P2 (distance 2R from O1 on the far side, 5R from O2): ρ1(4π R³/3)/(2R)² + ρ2(4π·8R³/3)/(5R)² = 0, giving ρ1/ρ2 = −32/25.
Correct options: (b) and (d).
Teacher's Note: Two possible points on the line at distance 2R: one inside the big sphere (field ∝ r) and one outside.
Exam Note: Outside points use kQ/r²; inside the big sphere use ρr/3ε₀.
Question 2.4.6. Six point charges are kept at the vertices of a regular hexagon of side L and centre O, as shown in the figure. Given that K = (1/4πε0)(q/L²), which of the following statements is/are correct?
(a) The electric field at O is 6K along OD.
(b) The potential at O is zero.
(c) The potential at all points on the line PR is the same.
(d) The potential at all points on the line ST is the same.
(Figure: regular hexagon with vertices A (left, +2q), B (lower left, +q), C (lower right, −q), D (right, −2q), E (upper right, −q) and F (upper left, +q); P is the midpoint of EF at the top, R the midpoint of BC at the bottom, S the point between A and O and T the point between O and D on the horizontal line AD.)
Solution. The field at O: the pair A (+2q) and D (−2q) gives 4K along OD, and the pairs F (+q), C (−q) and B (+q), E (−q) each give 2K with components along OD adding to 2K, so the total is 6K along OD: (a).
The line PR is the perpendicular bisector of all the dipoles (each +/− pair is symmetric about it), so the potential V = 0 on PR, including at O: (b) and (c).
On the line ST (the axis through A and D) the potential varies from point to point, so (d) is incorrect.
Correct options: (a), (b) and (c).
Teacher's Note: Pair opposite charges as dipoles; the perpendicular bisector line of dipoles is an equipotential at V = 0.
Exam Note: Add the field vectors of the three dipoles along OD.
Question 2.4.7. The figures below depict two situations, in each of which two infinitely long static line charges of constant positive line charge density λ are kept parallel to each other. In their resulting electric fields, point charges +q and −q are kept in equilibrium between the lines. The point charges are confined to move in the x-direction only. If they are given a small displacement about their equilibrium positions then which of the following statements is/are correct?
(a) Both charges execute simple harmonic motion.
(b) Both charges will continue to move in the directions of their displacements.
(c) Charge +q executes SHM while charge −q continues to move in the direction of its displacement.
(d) Charge −q executes SHM while charge +q continues to move in the direction of its displacement.
(Figure: two situations, each with two vertical parallel line charges λ and a point charge on the x-axis midway between them: the first with +q and the second with −q.)
Solution. The displacement of +q towards +x produces a net restoring force towards −x (and vice versa). With line charges at distance d from the equilibrium point, F = q[2Kλ/(d − x) − 2Kλ/(d + x)] ≈ 4Kλq x/d², so +q executes SHM with T = 2π√(md²/(4Kλq)).
In the second case, −q moves along the direction of its displacement (the force reinforces the displacement).
Correct option: (c).
Teacher's Note: Positive test charge between like line charges feels a restoring force; a negative one feels the opposite.
Exam Note: Expand the field difference to first order in x for SHM.
Question 2.4.8. Let E1(r), E2(r) and E3(r) be the respective electric fields at a distance r from a point charge Q, an infinitely long wire with a constant linear charge density λ, and an infinite plane with a uniform surface charge density σ. If E1(r0) = E2(r0) = E3(r0) at a given distance r0 then
(a) Q = 4σπr0² (b) r0 = λ/(2πσ)
(c) E1(r0/2) = 2E2(r0/2) (d) E2(r0/2) = 4E3(r0/2)
Solution. Equating: Q/(4πε0r0²) = λ/(2πε0r0) = σ/(2ε0). So Q = 2πσr0² (option (a) is wrong) and r0 = λ/(πσ) (option (b) is wrong).
At r0/2: E1 = 4E1(r0), E2 = 2E2(r0), E3 = E3(r0) (plane field is independent of distance). Hence E1(r0/2) = 2E2(r0/2): (c). Also E3(r0/2) = E3(r0) = E2(r0) = E2(r0/2)/2, so (d) is wrong.
Correct option: (c).
Teacher's Note: Point charge field ∝ 1/r², line ∝ 1/r, plane constant; halve r and compare.
Exam Note: Plane field does not change with distance.
Question 2.4.9. Consider a uniform spherical charge distribution of radius R1 centred at the origin O. In this distribution, an eccentric spherical cavity of radius R2, centred at P with distance OP = a = R1 − R2 (see the figure) is made. If the electric field inside the cavity at position r is E(r) then which of the following statements is/are correct?
(a) E is uniform, its magnitude is independent of R2 but its direction depends on r.
(b) E is uniform, its magnitude depends on R2 but its direction depends on r.
(c) E is uniform, its magnitude is independent of a but its direction depends on a.
(d) E is uniform and both its magnitude and direction depends on a.
Solution. The field at a point A inside the cavity (OA = r) due to the full solid sphere is E1 = ρr/(3ε0) (vector OA). The cavity is equivalent to a sphere of charge −ρ centred at P, giving E2 = (ρ/(3ε0))(−PA) = (ρ/(3ε0))AP.
Net field E = E1 + E2 = (ρ/(3ε0))(OA + AP) = (ρ/(3ε0))OP = ρa/(3ε0), which is uniform and depends on the vector a only.
Correct option: (d).
Teacher's Note: Cavity = full sphere plus a sphere of opposite charge; the position vectors combine to OP.
Exam Note: The cavity field depends only on the centre-to-centre vector a.
Question 2.4.10. A point charge +Q is placed just outside an imaginary hemispherical surface of radius R as shown in the figure. Which of the following statements is/are correct?
(a) The electric flux passing through the curved surface of the hemisphere is −(Q/(2ε0))(1 − 1/√2).
(b) The component of electric field normal to the flat surface is constant over the surface.
(c) The total flux through the curved and the flat surfaces is Q/ε0.
(d) The circumference of the flat surface is all equipotential.
(Figure: a hemisphere of radius R with its flat base below and curved surface above; the charge +Q sits just outside, at the top of the dome on the symmetry axis; lines from the charge to the rim make an angle θ = 45° with the axis.)
Solution. The electric flux linked with the hemisphere is contained within the solid angle subtended by the flat surface at the position of the charge: Ω = 2π(1 − cos 45°) = 2π(1 − 1/√2).
Flux through the curved surface ψ = −(Q/ε0)(Ω/4π) = −(Q/(2ε0))(1 − 1/√2).
All points on the circumference are at the same distance (√2R) from the charge, so it is equipotential.
Correct options: (a) and (d).
Teacher's Note: Flux through a surface is Q/ε₀ times the fraction of solid angle it subtends at the charge.
Exam Note: Charge outside gives zero net flux through the closed hemisphere.
Question 2.4.11. In the circuit shown in the figure, there are two parallel plate capacitors, each of capacitance C. The switch S1 is pressed first to fully charge the capacitor C1 and then released. The switch S2 is then pressed to charge the capacitor C2. After a pause, S2 is released and then S3 is pressed. After some time
(a) the charge on the upper plate of C1 is 2CV0 (b) the charge on the upper plate of C1 is CV0
(c) the charge on the upper plate of C1 is 0 (d) the charge on the upper plate of C2 is −CV0
(Figure: a battery of emf 2V0 in series with switch S1 connects across capacitor C1; switch S2 connects C1 to C2; switch S3 connects C2 to a second battery of emf V0 with reversed polarity.)
Solution. After S1 is closed, C1 holds charge 2CV0. When S2 is closed, this charge is shared equally between C1 and C2, and both of their upper plates have charge CV0.
When S3 is closed, C2 is connected to the battery V0 and its upper plate becomes −CV0 (lower plate +CV0), while C1 is isolated and keeps CV0.
Correct options: (b) and (d).
Teacher's Note: Charge sharing between equal capacitors halves the charge; an isolated capacitor keeps its charge.
Exam Note: S₃ affects only C₂, so C₁ remains at CV₀.
Question 2.4.12. A parallel plate capacitor has a dielectric slab of dielectric constant K between the plates that covers one-third of the area of its plates as shown in the figure. The total capacitance of the capacitor is C while that of the portion with dielectric in between is C1. When the capacitor is charged, the plate area covered by the dielectric gets charge Q1 and the rest of the area gets charge Q2. The electric field in the dielectric is E1 and that on the other portion is E2. Choose the correct option(s), ignoring the edge effects.
(a) E1/E2 = 1 (b) E1/E2 = 1/K (c) Q1/Q2 = 3/K (d) C/C1 = (2 + K)/K
(Figure: the upper one-third of the capacitor gap is filled with the dielectric (charge Q1, field E1); the lower two-thirds is air (charge Q2, field E2).)
Solution. Both parts have the same potential difference V and the same separation d, so E1/E2 = 1 (E = V/d): (a).
Let C0 be the capacitance of the whole air capacitor. The dielectric part has C1 = KC0/3 and the air part has 2C0/3, so C = KC0/3 + 2C0/3 = ((K + 2)/3)C0. Hence C/C1 = (2 + K)/K: (d).
Also Q1/Q2 = C1/(2C0/3) = K/2, so (c) is wrong.
Correct options: (a) and (d).
Teacher's Note: Slab and air regions are in parallel: same V, same E = V/d, charges proportional to capacitances.
Exam Note: Parallel capacitors share voltage, so the fields are equal.
Question 2.4.13. A parallel plate capacitor having plates of area A and plate separation d, has capacitance C1 in air. When two dielectrics of different relative permittivities (ε1 = 2 and ε2 = 4) are introduced between the two plates as shown in the figure, the capacitance becomes C2. The ratio C2/C1 is
(a) 6/5 (b) 5/3 (c) 7/5 (d) 7/3
(Figure: a block capacitor of plate separation d. The left half (area A/2) has the first dielectric ε1 over the full separation d; the right half (area A/2) is split along the separation into two layers of thickness d/2 each: ε1 near one plate and ε2 near the other.)
Solution. The system comprises three capacitors: the two layers of the right half (area A/2, thickness d/2 each) and the left half (area A/2, thickness d). With ε1 = 2 and ε2 = 4: Ca = ε1ε0(A/2)/(d/2) = 2ε0A/d = 2C1; Cb = ε2ε0(A/2)/(d/2) = 4ε0A/d = 4C1; Cc = ε1ε0(A/2)/d = ε0A/d = C1 (Corrected: the printed solution transposes the values of the two layers as 4C1 and 2C1; the result is unchanged).
Ca and Cb are in series, and this combination is in parallel with Cc. Equivalent capacitance C2 = CaCb/(Ca + Cb) + Cc = (8/6 + 1)C1 = (7/3)C1.
Correct option: (d).
Teacher's Note: Break the block into a series pair in parallel with a single capacitor; add accordingly.
Exam Note: Series first, then parallel.
Question 2.4.14. In the given diagram, a field-line of a particular force-field is shown. It can never represent
(a) an electrostatic field (b) a magnetostatic field (c) a gravitational field of a mass at rest (d) an induced electric field
(Figure: a single closed circular field line with arrows showing circulation.)
Solution. Electrostatic and gravitational static fields are both conservative, and their field lines never form closed loops. Magnetostatic and induced electric fields can have closed field lines.
Correct options: (a) and (c).
Teacher's Note: A closed field line means non-zero circulation, impossible for a conservative field.
Exam Note: Conservative fields have open field lines only.
Question 2.4.15. The electrostatic potential (φr) of a spherical symmetric system kept at origin is shown in the adjacent figure, and given as φr = q/(4πε0r) (r ≥ R0), φr = q/(4πε0R0) (r ≤ R0). Which of the following options is/are correct?
(a) For spherical region r ≤ R0, the total electrostatic energy stored is zero.
(b) Within r = 2R0, the total charge is q.
(c) There will be no charge anywhere except at r = R0.
(d) The electric field is discontinuous at r = R0.
(Figure: φr against r: a constant horizontal line up to R0, then a decaying curve ∝ 1/r beyond R0.)
Solution. The graph corresponds to a uniformly charged spherical conducting shell of radius R0.
Inside the shell (r < R0) the electric field E = 0 (the potential is constant), so the total electrostatic energy stored is zero: (a).
The total charge q is on the surface of the shell (r = R0) and nowhere else: (c). Within the concentric sphere r = 2R0 the total charge contained is q: (b).
The field is zero inside and at the surface suddenly becomes (1/4πε0)(q/R0²), so there is a discontinuity at r = R0: (d).
Correct options: (a), (b), (c) and (d).
Teacher's Note: Constant potential inside means zero field and no charge; a 1/r potential outside means a point-like source at the shell.
Exam Note: Field jump at R₀ shows surface charge.
Question 2.4.16. Under the influence of the Coulomb field of charge +Q, a charge −q is moving around it in an elliptical orbit. Find out the correct statement(s).
(a) The angular momentum of the charge −q is constant
(b) The linear momentum of the charge −q is constant
(c) The angular velocity of the charge −q is constant
(d) The linear speed of the charge −q is constant
Solution. The Coulomb force between Q and −q is radial, so the torque τ = r × F = rF sin 180° = 0, and the angular momentum (r × p) is conserved.
The linear speed, linear momentum and angular velocity change with time in an elliptical orbit.
Correct option: (a).
Teacher's Note: Central force gives zero torque, so only angular momentum is conserved.
Exam Note: Same as planetary motion: speed varies along the ellipse.
2.5 Current Electricity and Magnetism
Question 2.5.1. An incandescent bulb has a thin filament of tungsten that is heated to a high temperature by passing an electric current. The hot filament emits black-body radiation. The filament is observed to break up at random locations after a sufficiently long time of operation due to nonuniform evaporation of tungsten from the filament. If the bulb is powered at a constant voltage, which of the following statements is/are true?
(a) The temperature distribution over the filament is uniform.
(b) The resistance over small sections of the filament decreases with time.
(c) The filament emits more light at higher band frequencies before it breaks up.
(d) The filament consumes less electrical power towards the end of the life of the bulb.
Solution. At the time of breaking up of the filament, the temperature becomes higher and, by Wien's law λmax ∝ 1/T, so νm ∝ T, the filament emits more light at higher band frequencies: (c).
As the supply voltage remains constant, the consumed power is P = V²/R. Since the resistance R increases with the rise in temperature (and the thinner filament has higher resistance), the filament consumes less power towards the end of the life of the bulb: (d).
Correct options: (c) and (d).
Teacher's Note: Thin hot spots have higher resistance and temperature; constant V means P = V²/R drops.
Exam Note: Wien's law shifts the peak to higher frequency at higher T.
Question 2.5.2. For the resistance network shown in the figure, choose the correct option(s).
(a) The current through PQ is zero.
(b) I1 = 3 A.
(c) The potential at S is less than that at Q.
(d) I2 = 2 A.
(Figure: a 12 V battery sends total current I1 into node A. Upper branch: A to P through 2 Ω, P to S through 2 Ω, S to the far node through 2 Ω (current I2). Lower branch: A to Q through 4 Ω, Q to T through 4 Ω, T to the far node through 4 Ω. P and Q are joined by a 1 Ω resistor, and S and T by a 1 Ω resistor.)
Solution. By symmetry, P and Q as well as S and T are at the same potential, so the resistors between them carry no current. The simplified circuit has two branches: 2 + 2 + 2 = 6 Ω and 4 + 4 + 4 = 12 Ω in parallel: Req = 6 × 12/18 = 4 Ω.
I1 = 12/4 = 3 A. I2 = (12/(6 + 12)) × 3 = 2 A, and the lower branch carries 1 A.
VA − VS = (2 A)(4 Ω) = 8 V and VA − VT = (1 A)(8 Ω) = 8 V, so VS = VT, and VP = VQ means no current through PQ. Also VA − VQ = 4 V while VA − VS = 8 V, so VQ > VS.
Correct options: (a), (b), (c) and (d).
Teacher's Note: A balanced bridge carries no current in the middle resistor, so remove it and use series-parallel rules.
Exam Note: Equal ratios in both arms make the bridge balanced.
Question 2.5.3. In an aluminium (Al) bar of square cross section, a square hole is drilled and is filled with iron (Fe) as shown in the figure. The electrical resistivities of Al and Fe are 2.7 × 10−8 Ω m and 1.0 × 10−7 Ω m respectively. The electrical resistance between the two faces P and Q of the composite bar is
(a) (2475/64) μΩ (b) (1875/64) μΩ (c) (1875/49) μΩ (d) (2475/132) μΩ
(Figure: a bar of length 50 mm (from face P to face Q) with a 7 mm × 7 mm square cross section; a square iron core 2 mm × 2 mm is embedded in the aluminium.)
Solution. Riron = ρl/A = (1.0 × 10−7 Ω m)(50 × 10−3 m)/(4 × 10−6 m²) = 1250 μΩ.
Raluminium = (2.7 × 10−8 Ω m)(50 × 10−3 m)/((49 − 4) × 10−6 m²) = 30 μΩ.
The two are in parallel: R = R1R2/(R1 + R2) = 1250 × 30/1280 μΩ = (1875/64) μΩ.
(The printed solution drops the μ in the intermediate values; the final unit is μΩ.)
Correct option: (b).
Teacher's Note: Iron core and aluminium sleeve carry current side by side, so conductances add.
Exam Note: Subtract the hole's area from the aluminium cross section.
Question 2.5.4. The heater of an electric kettle is made of a wire of length L and diameter d. It takes 4 minutes to raise the temperature of 0.5 kg of water by 40 K. This heater is replaced by a new heater having two wires of the same material, each of length L and diameter 2d. The way these wires are connected is given in the options. How much time in minutes will it take to raise the temperature of the same amount of water by 40 K?
(a) 4, if the wires are in parallel (b) 2, if the wires are in series
(c) 1, if the wires are in series (d) 0.5, if the wires are in parallel
Solution. R1 = ρL/(πr²) and R2 = ρL/(π4r²) = R1/4. Initially H = (V²/R1)·4 (min).
Two wires of resistance R2 in series: H = V²t1/(2R2) = V²t1/(2(R1/4)) = 2V²t1/R1, so 2t1 = 4 min, t1 = 2 min.
Two wires in parallel: equivalent resistance R2/2 = R1/8, so H = 8V²t2/R1, so 8t2 = 4 min, t2 = 0.5 min.
Correct options: (b) and (d).
Teacher's Note: Doubling diameter cuts resistance by 4; time for fixed heat ∝ R at fixed voltage.
Exam Note: Series gives R/2 of the original, parallel gives R/8.
Question 2.5.5. In the given circuit, the key is pressed at time t = 0. Which of the following statements is/are true?
(a) The voltmeter displays −5 V as soon as the key is pressed, and displays +5 V after a long time.
(b) The voltmeter will display 0 V at time t = ln 2 s.
(c) The current in the ammeter becomes 1/e of the initial value after 1 s.
(d) The current in the ammeter become zero after a long time.
(Figure: a 5 V battery with a key and an ammeter A feed a bridge. Upper-left arm: a 40 μF capacitor from P to Q; upper-right arm: a 25 kΩ resistor from Q to the right corner; lower-left arm: a 50 kΩ resistor from P to R; lower-right arm: a 20 μF capacitor from R to the right corner. A voltmeter V is connected between Q (marked −) and R (marked +).)
Solution. When the key is closed at t = 0, the voltage across each capacitor is zero, so the voltmeter reads −5 V. At t = ∞ the capacitors are fully charged and the voltmeter reads +5 V: (a).
During the transient, I1 = (5/50)e−t/τ mA, I2 = (5/25)e−t/τ mA and I = I1 + I2, with τ = RC = 1 s for both branches. After 1 s the ammeter current is 1/e of its initial value and at t = ∞ it becomes zero: (c), (d).
Voltmeter reading: VQ − VR = (VP − VR) − (VP − VQ) = ΔV50kΩ − ΔV40μF = 5e−t/τ − 5(1 − e−t/τ) = 5(2e−t/τ − 1). At t = ln 2 s, e−t/τ = 1/2, so the voltmeter reads 0 V: (b).
Correct options: (a), (b), (c) and (d).
Teacher's Note: Both RC branches have τ = 1 s; the meter reads the difference of two capacitor/resistor voltages.
Exam Note: Branch voltages equal at t = τ ln 2.
Question 2.5.6. Two ideal batteries of emf V1 and V2 and three resistors R1, R2 and R3 are connected as shown in the figure. The current in resistance R2 would be zero if
(a) V1 = V2 and R1 = R2 = R3 (b) V1 = V2 and R1 = 2R2 = R3
(c) V1 = 2V2 and 2R1 = 2R2 = R3 (d) 2V1 = V2 and 2R1 = R2 = R3
(Figure: the three resistors meet at a common junction O. R1 goes up to battery V1, R2 goes to the common bottom wire (0 V) and R3 goes to battery V2 whose other terminal is at the bottom wire, so its end is at −V2 relative to the junction side as in the solution.)
Solution. Let V0 be the potential at O. The junction rule gives (V1 − V0)/R1 = (V0 − 0)/R2 + (V0 + V2)/R3, so V0 = (V1/R1 − V2/R3)/(1/R1 + 1/R2 + 1/R3).
The current through R2 is zero if V0 = 0, i.e. V1/V2 = R1/R3.
Check: (a) V1/V2 = 1 = R1/R3 ✓; (b) 1 = R1/R3 = 1 ✓; (c) V1/V2 = 2 but R1/R3 = 1/2 ✗; (d) V1/V2 = 1/2 and R1/R3 = 1/2 ✓.
Correct options: (a), (b) and (d).
Teacher's Note: Node-voltage method at the junction; zero current in R₂ means the junction sits at the reference potential.
Exam Note: Set the node potential to zero and compare ratios V₁/V₂ = R₁/R₃.
Question 2.5.7. Consider two identical galvanometers and two identical resistors with resistance R. If the internal resistance of the galvanometers Rg < R/2, which of the following statements about any one of the galvanometers is/are true?
(a) The maximum voltage range is obtained when all the components are connected in series.
(b) The maximum voltage range is obtained when the two resistors and one galvanometer are connected in series, and the second galvanometer is connected in parallel to the first galvanometer.
(c) The maximum current range is obtained when all the components are connected in parallel.
(d) The maximum current range is obtained when the two galvanometers are connected in series and the combination is connected in parallel with both the resistors.
Solution. All in series: with Ig the full-scale current, the potential difference is V1 = Ig(2Rg + 2R) = 2Ig(R + Rg).
Two galvanometers in parallel, in series with the two resistors: 2Ig flows through the resistors, so the voltage range is V2 = IgRg + 2Ig·2R = Ig(Rg + 4R). If 2Rg < R then V2 > V1, so (b) is correct and (a) is not.
For the maximum current range, all the components are connected in parallel: (c) correct, (d) not.
Correct options: (b) and (c).
Teacher's Note: Shunting a galvanometer multiplies the allowed current; resistors in series add to the voltage range.
Exam Note: Compare V₁ and V₂ using Rg < R/2.
Question 2.5.8. A steady current I flows along an infinitely long hollow cylindrical conductor of radius R. This cylinder is placed coaxially inside an infinitely long solenoid of radius 2R. The solenoid has n turns per unit length and carries a steady current I. Consider a point P at a distance r from the common axis. Which of the following statements is/are correct?
(a) In the region 0 < r < R, the magnetic field is nonzero.
(b) In the region R < r < 2R, the magnetic field is along the common axis.
(c) In the region R < r < 2R, the magnetic field is tangential to the circle of radius r, centred on the axis.
(d) In the region r > 2R, the magnetic field is nonzero.
Solution. In the region 0 < r < R, the field of the hollow conductor is zero but the solenoid gives a uniform axial field μ0nI, so the field is nonzero.
For R < r < 2R, the field is the sum of the solenoid's axial field and the conductor's circulating field, so it is neither purely axial nor purely tangential: (b) and (c) are wrong.
For r > 2R, the solenoid's field is zero, but the straight conductor's field μ0I/(2πr) is nonzero: (d) is correct.
Correct options: (a) and (d).
Teacher's Note: Superpose the solenoid's axial field (inside only) and the wire's azimuthal field (outside only).
Exam Note: Add solenoid axial and wire azimuthal fields.
Question 2.5.9. A conductor (shown in the figure) carrying a constant current I is kept in the xy-plane in a uniform magnetic field B. If F is the magnitude of the total magnetic force acting on the conductor, the correct statement(s) is/are
(a) If B is along z, F ∝ (L + R) (b) If B is along x, F = 0
(c) If B is along y, F ∝ (L + R) (d) If B is along z, F = 0
(Figure: a current-carrying wire lying along the x-axis with current I flowing in the +x direction: a straight piece of length L, then two raised circular arcs of radius R (one subtending π/6 and one π/4 as marked), then another straight piece of length L; the ends of the whole wire lie on the x-axis, 2(L + R) apart.)
Solution. The effective length of the wire is l = 2(L + R) î, so the magnetic force F = I(l × B) = 2I(L + R) î × B.
If B = B k̂: F = 2I(L + R)B (î × k̂) = 2I(L + R)B(−ĵ), so F ∝ (L + R): (a).
If B = B î: F = 2I(L + R)B(î × î) = 0: (b).
If B = B ĵ: F = 2I(L + R)B(î × ĵ) = 2B(L + R)I k̂, so F ∝ (L + R): (c).
If B = B k̂, F ≠ 0, so (d) is incorrect.
Correct options: (a), (b) and (c).
Teacher's Note: Force on a current-carrying conductor in a uniform field equals I(net displacement × B), whatever the shape.
Exam Note: Use the straight line joining the ends of the wire.
Question 2.5.10. Consider the motion of a positive point charge in a region where there are simultaneous uniform electric and magnetic fields E = E0 ĵ and B = B0 ĵ. At time t = 0, this charge has velocity v in the xy-plane, making an angle θ with the x-axis. Which of the following options is correct for time t > 0?
(a) If θ = 0, the charge moves in a circular path in the xz-plane.
(b) If θ = 0, the charge undergoes helical motion with a constant pitch along the y-axis.
(c) If θ = 10°, the charge undergoes helical motion with its pitch increasing with time.
(d) If θ = 90°, the charge undergoes linear but accelerated motion along the y-axis.
Solution. For θ = 0, the path of the charge is circular due to B, but it also experiences the force qE0 ĵ due to the electric field, giving an acceleration along the y-axis. The resulting path is helical with a variable (increasing) pitch, so (a) and (b) are wrong.
With similar arguments, for θ = 10° the path is helical with the pitch increasing with time: (c).
For θ = 90°, the magnetic force q(v × B) is zero, but Fel = qE0: the motion is linear, accelerated along the y-axis: (d).
Correct options: (c) and (d).
Teacher's Note: B bends the path in the xz-plane while E accelerates the charge along y: helix with growing pitch.
Exam Note: Velocity parallel to B feels no magnetic force.
Question 2.5.11. An electron and a proton are moving on straight parallel paths with the same velocity. They enter a semi-infinite region of uniform magnetic field perpendicular to the velocity. Which of the following statements is/are true?
(a) They will never come out of this magnetic field region.
(b) They will come out travelling along parallel paths.
(c) They will come out at the same time.
(d) They will come out at different times.
Solution. qvB = mv²/r, so r = mv/(qB) ∝ m. Each particle describes a semicircular path (in opposite senses, with radii proportional to its mass) and leaves the field travelling in the direction opposite to its entry, so the exit paths are parallel.
The time spent is half a period, T/2 with T = 2πm/(qB), so T ∝ m: the proton and electron take different times.
Correct options: (b) and (d).
Teacher's Note: Perpendicular entry into a half-space gives a semicircle; radius ∝ m and time ∝ m.
Exam Note: Semicircle time depends on mass, not speed.
Question 2.5.12. A particle of mass M and positive charge Q, moving with a constant velocity u1 = (4î) m s−1, enters a region of uniform static magnetic field normal to the xy-plane. The region of the magnetic field extends from x = 0 to x = L for all values of y. After passing through the region, the particle emerges into the other side after 10 ms with a velocity u2 = 2(√3 î + ĵ) m s−1. Which of the following statements is/are correct?
(a) The direction of the magnetic field is along the −z axis.
(b) The direction of the magnetic field is along the +z axis.
(c) The magnitude of the magnetic field is 50πM/(3Q) units.
(d) The magnitude of the magnetic field is 100πM/(3Q) units.
Solution. The magnetic force on the positive charge is initially along +y, so the field is along the negative z-direction: (a).
The radius of the circular path is r = Mv/(QB). The velocity at the point of emergence is 2(√3 î + ĵ) m s−1, which makes an angle θ = tan−1(1/√3) = 30° = π/6 with the x-axis.
Arc length = (π/6)r = (π/6)(M·4/(QB)) = 2πM/(3QB); time = arc/v = 2πM/(3QB × 4) = 10 × 10−3 s, so B = 50πM/(3Q): (c).
Correct options: (a) and (c).
Teacher's Note: Deflection angle gives the arc, the arc and speed give the time, which fixes B.
Exam Note: Bend direction fixes the field direction.
JEE Mathematics: SB Mathur Solutions for SB Mathur Physics Solutions Chapter 2 Multiple Choice Questions Type 2 Part 1
Complete Math Solutions for SB Mathur Physics Solutions Chapter 2 Multiple Choice Questions Type 2 Part 1
Review detailed solutions for JEE Mathematics. The SB Mathur Physics Solutions Chapter 2 Multiple Choice Questions Type 2 Part 1 PDF provides comprehensive answers mapped to standard SB Mathur Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Step-by-Step Mathematical Explanations
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Additional Study Materials for 2026
In addition to these SB Mathur Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the SB Mathur book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.