S Krotov Physics Solutions 1.1 to 1.61

SS Krotov Solutions for JEE Physics: Problems 1.1 to 1.61

Access comprehensive textbook solutions for Problems 1.1 to 1.61 using the SS Krotov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Practice JEE Physics Solutions: Problems 1.1 to 1.61

Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Physical Foundations of Mechanics - Problems 1.1 to 1.61

Question 1.1. A body with zero initial velocity moves down a rough inclined plane from a height h and then ascends along the same plane with an initial velocity such that it stops at the same height h. In which case is the time of motion longer?

Solution. If friction is taken into consideration, the velocity v1 of the body at the end of the descent is smaller than the velocity v (due to the work done against friction), while the velocity v2 that has to be imparted to the body for raising it along the inclined plane is larger than v for the same reason. Since the descent and ascent occur with constant (although different) accelerations, and the traversed path is the same, the time t1 of descent and the time t2 of ascent can be found from the formulas s = v1t1/2, s = v2t2/2, where s is the distance covered along the inclined plane. Since v1 < v2, it follows that t1 > t2. Thus, in the presence of sliding friction, the time of descent from the height h is longer than the time of ascent to the same height.

Teacher's Note: Same distance, constant acceleration: s = (average speed) × t; slower average speed on descent means longer time.

Exam Note: Use s = (u+v)t/2 for each leg.

Question 1.2. At a distance L = 400 m from the traffic light, brakes are applied to a locomotive moving at a velocity v = 54 km/h. Determine the position of the locomotive relative to the traffic light 1 min after the application of brakes if its acceleration a = −0.3 m/s2.

Solution. Since the locomotive moves with a constant deceleration after the application of brakes, it will come to rest in t = v/a = 50 s, during which it will cover a distance s = v2/(2a) = 375 m. Thus, 1 min after application of brakes, the locomotive will be at a distance ℓ = L − s = 25 m from the traffic light.

Teacher's Note: Check if it has already stopped: 60 s exceeds the stopping time of 50 s.

Exam Note: Convert km/h to m/s; test stopping time first.

Question 1.4. A point mass starts moving in a straight line with a constant acceleration a. At a time t1 after the beginning of motion, the acceleration changes sign, remaining the same in magnitude. Determine the time t from the beginning of motion at which the point mass returns to the initial position.

Solution. During a time t1, the point mass moving with an acceleration a will cover a distance s = at12/2 and will have a velocity v = at1. Let us choose the x-axis as shown in the figure. Here point O marks the beginning of motion, and A is the point at which the body is at the moment t1. Taking into account the sign reversal of the acceleration and applying the formula for the path length in uniformly varying motion, we determine the time t2 in which the body will return from point A to point O:
0 = at12/2 + at1t2 − at22/2, i.e. t22 − 2t1t2 − t12 = 0, whence t2 = t1(1 + √2).
The time elapsed from the beginning of motion to the moment of return to the initial position is t = t1 + t2 = t1(2 + √2).

OAxS = at₁²/2 (O to A), v = at₁ at A

Teacher's Note: Restart the kinematics at A with velocity at1 and acceleration −a; reject the negative root of the quadratic.

Exam Note: Reject negative root; add t1 at the end.

Question 1.8. A small ball thrown at an initial velocity v0 at an angle α to the horizontal strikes a vertical wall moving towards it at a horizontal velocity v and is bounced to the point from which it was thrown. Determine the time t from the beginning of motion to the moment of impact, neglecting friction losses.

Solution. Since the wall is smooth, the impact against the wall does not alter the vertical component of the ball velocity. Therefore, the total time t1 of motion of the ball is the total time of ascent and descent of the body thrown upwards at a velocity v0 sin α in the gravitational field: t1 = 2v0 sin α/g. Before the collision the ball moves horizontally at v0 cos α. The velocity at which the ball approaches the wall is v0 cos α + v. Since the impact is perfectly elastic, the ball moves away from the wall after the collision at the velocity v0 cos α + v relative to the wall, so relative to the ground its horizontal velocity is (v0 cos α + v) + v = v0 cos α + 2v. If the time before the impact is t, equating the distances covered before and after the collision: v0 cos α · t = (t1 − t)(v0 cos α + 2v). With t1 = 2v0 sin α/g we find
t = v0 sin α (v0 cos α + 2v) / [g (v0 cos α + v)].

Teacher's Note: Use the wall frame for the elastic bounce, then ground frame; vertical motion is unaffected.

Exam Note: Elastic: relative speed reverses; vertical part unchanged.

Question 1.11. The slopes of the windscreens of two motorcars are β1 = 30° and β2 = 15° respectively. At what ratio v1/v2 of the velocities of the cars will their drivers see the hailstones bounced by the windscreen of their cars in the vertical direction? Assume that hailstones fall vertically.

Solution. Let hail fall along the vertical at a velocity v. In the reference frame fixed to the motorcar, the angle of incidence of hailstones on the windscreen is equal to the angle of reflection. The velocity of a hailstone before it strikes the windscreen is v − v1 (see figure). Since hailstones are bounced vertically upwards (from the viewpoint of the driver) after the reflection, the angle of reflection, and hence the angle of incidence, is equal to β1 (β1 is the slope of the windscreen of the motorcar). Consequently, α + 2β1 = π/2, and tan α = v/v1. Hence tan α = tan(π/2 − 2β1) = cot 2β1, and v/v1 = cot 2β1. Therefore, we obtain the following ratio of the velocities of the two motorcars: v1/v2 = cot 2β2 / cot 2β1 = cot 30°/cot 60° = 3.

Teacher's Note: In the car frame the hail has velocity v and v1 components; reflection law fixes tanα = cot2β.

Exam Note: Use the reflection law in the car frame.

Question 1.15. An open merry-go-round rotates at an angular velocity ω. A person stands in it at a distance r from the rotational axis. It is raining, and the raindrops fall vertically at a velocity v0. How should the person hold an umbrella to protect himself from the rain in the best way?

Solution. Let the velocity of the drops relative to the merry-go-round be at an angle α to the vertical. This angle can be determined from the velocity triangle shown in the figure. In accordance with the velocity composition rule v0 = vrel + vm.g.r., where vm.g.r. is the velocity of the merry-go-round in the region of location of the person, vrel = v0 − vm.g.r. The velocity of the merry-go-round is vm.g.r. = ωr. Consequently cot α = v0/(ωr). Therefore, the axis of the umbrella should be tilted at the angle α = arccot[v0/(ωr)] to the vertical in the direction of motion of the merry-go-round and perpendicular to the radius of the latter.

u = −v (merry-go-round)v₀v (relative)α

Teacher's Note: Umbrella axis must align with the drops' velocity relative to the rotating platform: subtract the platform's linear velocity ωr.

Exam Note: Relative velocity = v0 − ωr.

Question 1.16. A bobbin rolls without slipping over a horizontal surface so that the velocity v of the end of the thread (point A) is directed along the horizontal. A board hinged at point B leans against the bobbin (Figure). The inner and outer radii of the bobbin are r and R respectively. Determine the angular velocity ω of the board as a function of the angle α.

Solution. (Figure: a bobbin of outer radius R and inner radius r on the horizontal floor; the thread leaves the inner drum at its top at point A and moves horizontally with velocity v; a board hinged at point B on the floor makes angle α with the floor and touches the bobbin at point C.) Let the board touch the bobbin at point C at a certain instant. The velocity of point C is the sum of the velocity v0 of the axis O of the bobbin and the velocity of point C relative to O, which is tangent to the circle at C (that is, along the board) and equal in magnitude to v0 (no slipping). If the angular velocity of the board is ω, the linear velocity of the point of the board touching the bobbin is ωR cot(α/2), since BC = R cot(α/2). Since the board remains in contact with the bobbin, the velocity of C relative to the board is directed along the board, whence ωR cot(α/2) = v0 sin α. Since the bobbin rolls without slipping, v0/R = v/(R + r). Therefore
ω = [v/(R + r)] sin α tan(α/2) = 2v sin2(α/2) / (R + r).
Corrected: the book prints an extra factor cos(α/2) in the denominator of the last expression; since sin α tan(α/2) = 2 sin2(α/2), the correct final form is as written here.

Teacher's Note: Only the velocity component perpendicular to the board matters at the contact point; use BC = R cot(α/2).

Exam Note: Check identity sinα tan(α/2) = 2sin2(α/2).

Question 1.21. An ant runs from an ant-hill in a straight line so that its velocity is inversely proportional to the distance from the centre of the ant-hill. When the ant is at point A at a distance ℓ1 = 1 m from the centre of the ant-hill, its velocity v1 = 2 cm/s. What time will it take the ant to run from point A to point B which is at a distance ℓ2 = 2 m from the centre of the ant-hill?

Solution. The velocity of the ant varies with time according to a nonlinear law. Therefore, the mean velocity on different segments of the path will not be the same, and the well-known formulas for mean velocity cannot be used here. Let us divide the path of the ant from A to B into small segments Δℓ traversed in small equal time intervals Δt. Then Δt = Δℓ/vm, where vm is the mean velocity over a given segment Δℓ. We plot 1/vm against ℓ for the path between A and B. The graph is a segment of a straight line (figure). The hatched area S under this segment is numerically equal to the sought time. Let us calculate this area:
S = [(1/v1 + 1/v2)/2](ℓ2 − ℓ1) = (1/(2v1) + (1/(2v1))(ℓ2/ℓ1))(ℓ2 − ℓ1) = (ℓ22 − ℓ12)/(2v1ℓ1),
since 1/v2 = (1/v1)ℓ2/ℓ1. Thus the ant reaches B in the time t = (4 m2 − 1 m2)/(2 × 2×10−2 m/s × 1 m) = 75 s.

ℓ₁ℓ₂ℓ1/v₁1/v₂1/vS

Teacher's Note: Since v ∝ 1/ℓ, 1/v against ℓ is a straight line; time equals area under it.

Exam Note: Area under 1/v–ℓ graph gives time.

Question 1.26. The free end of a thread wound on a bobbin of inner radius r and outer radius R is passed round a nail A hammered into the wall (figure). The thread is pulled at a constant velocity v. Find the velocity v0 of the centre of the bobbin at the instant when the thread forms an angle α with the vertical, assuming that the bobbin rolls over the horizontal surface without slipping.

Solution. (Figure: bobbin of radii r and R on the floor; the thread leaves the inner drum and goes up to the nail A on the wall, making angle α with the vertical; the free end is pulled down with velocity v.) If the thread is pulled as shown, the bobbin rolls to the right, rotating clockwise about its axis. For point B (where the thread leaves the bobbin), the sum of the projections of the velocity v0 of translatory motion and the linear velocity of rotary motion (angular velocity ω) on the direction of the thread is equal to v: v = v0 sin α − ωr. Since the bobbin moves without slipping, the contact point C has zero velocity: v0 = ωR. Solving the equations, the velocity v0 is
v0 = vR/(R sin α − r).
It can be seen that for R sin α = r (when points A, B and C lie on the same straight line) the expression for v0 becomes meaningless. The obtained expression describes the motion of the bobbin to the right (when B is above the straight line AC and R sin α > r) as well as to the left (when B is below the line AC and R sin α < r).

Teacher's Note: Project velocities on the thread direction (thread inextensible) and use the no-slip condition v0 = ωR at the floor contact.

Exam Note: Two equations: thread constraint and rolling constraint.

Question 1.28. A block lying on a long horizontal conveyer belt moving at a constant velocity receives a velocity v0 = 5 m/s relative to the ground in the direction opposite to the direction of motion of the conveyer. After t = 4 s, the velocity of the block becomes equal to the velocity of the belt. The coefficient of friction between the block and the belt is μ = 0.2. Determine the velocity v of the conveyer belt.

Solution. In order to describe the motion of the block, we choose a reference frame fixed to the conveyer belt. Then the velocity of the block at the initial moment is vb = v0 + v, and the block moves with a constant acceleration a = −μg. For the instant t when the velocity of the block vanishes, we obtain 0 = v0 + v − μgt. Hence the velocity of the conveyer belt is v = μgt − v0 = 3 m/s (taking g = 10 m/s2; with g = 9.8 m/s2 it is 2.84 m/s).

Teacher's Note: In the belt frame friction gives constant deceleration μg until relative rest.

Exam Note: Relative initial speed is v0 + v.

Question 1.29. A body with zero initial velocity slips from the top of an inclined plane forming an angle α with the horizontal. The coefficient of friction μ between the body and the plane increases with the distance ℓ from the top according to the law μ = bℓ. The body stops before it reaches the end of the plane. Determine the time t from the beginning of motion of the body to the moment when it comes to rest.

Solution. Let us write the equation of motion for the body over the inclined plane. Let the instantaneous coordinate (the displacement from the top of the inclined plane) be x; then ma = mg sin α − mg cos α · bx, where m is the mass of the body and a is its acceleration. The form of this equation resembles that of vibratory motion of a body on a spring of rigidity k = mg cos α · b in the constant force mg sin α. This analogy helps solve the problem. The "equilibrium position" x0 is given by mg sin α − mg cos α · bx0 = 0, so x0 = (1/b) tan α. The motion is therefore half of an oscillation about x0 with amplitude x0 (the body starts at rest at x = 0, a distance x0 from equilibrium, and stops at x = 2x0; there the coefficient of friction is μst = 2 tan α, which exceeds tan α, so the body stays at rest). The angular frequency follows from k/m = gb cos α = ω02. The total time of motion equals half the period: t = T/2 = 2π/(2ω0) = π/√(gb cos α).

Teacher's Note: Equation a = g sinα − (gb cosα)x is simple harmonic about x0 = tanα/b; motion lasts half a period.

Exam Note: Recognise SHM; time = T/2.

Question 1.31. A rope is passed round a stationary horizontal log fixed at a certain height above the ground. In order to keep a load of mass m = 6 kg suspended on one end of the rope, the maximum force T1 = 40 N should be applied to the other end of the rope. Determine the minimum force T2 which must be applied to the rope to lift the load.

Solution. The force of gravity mg = 60 N acting on the load is considerably stronger than the force with which the rope should be pulled to keep the load. This is due to considerable friction of the rope against the log. At first, the friction prevents the load from slipping under the action of the force of gravity. The complete analysis of the distribution of friction acting on the rope is rather complex since the tension of the rope at points of its contact with the log varies from T1 to mg. However, the total friction Ffr is proportional to the tensions at the ends: for a certain coefficient k it is equal to the maximum tension, Ffr = kmg. So the ratio of maximum to minimum tension is constant for a given arrangement of rope and log: mg/T1 = 1/(1 − k), since T1 = mg − kmg. When we want to lift the load, the ends of the rope as if change places. The friction is now directed against the force T2. The ratio of the maximum tension (now T2) to the minimum (mg) is obviously the same: T2/(mg) = 1/(1 − k) = mg/T1. Hence T2 = (mg)2/T1 = 90 N.

Teacher's Note: Ratio of larger to smaller end tension is fixed by rope–log friction, so T2/mg = mg/T1.

Exam Note: Same tension ratio both ways; take g = 10.

Question 1.33. A certain constant force starts acting on a body moving at a constant velocity v. After a time interval Δt, the velocity of the body is reduced by half, and after the same time interval, the velocity is again reduced by half. Determine the velocity vf of the body after a time interval 3Δt from the moment when the constant force starts acting.

Solution. Let us choose the reference frame as shown in the figure. Suppose that vector OA is the initial velocity v. Then vector AB is the change in velocity during the time interval Δt. Since the force acting on the body is constant, vector BC equal to vector AB is the change in velocity during the next interval Δt. Therefore, in the time 3Δt after the beginning of the action of the force, the velocity will be represented by vector OD and AB = BC = CD. Let the projections of vector AB on the x- and y-axis be Δvx and Δvy. Then we obtain two equations: (v + Δvx)2 + Δvy2 = v2/4 and (v + 2Δvx)2 + (2Δvy)2 = v2/16. Since the final velocity satisfies vf2 = (v + 3Δvx)2 + (3Δvy)2, using the previous equations, we obtain vf = (√7/4) v. (Check: with v = 1, Δv·v = −33/64 and |Δv|2 = 9/32 give vf2 = 1 − 198/64 + 81/32 = 7/16.)

OABCDv = OA

Teacher's Note: Constant force means equal velocity-change vectors each interval; use vector addition and the magnitudes v, v/2, v/4.

Exam Note: Equal Δv vectors; solve for dot product.

Question 1.37. A light spring of length ℓ and rigidity k is placed vertically on a table. A small ball of mass m falls on it. Determine the height h from the surface of the table at which the ball will have the maximum velocity.

Solution. Let us write the equation of motion for the ball at the moment when the spring is compressed by Δx: ma = mg − kΔx. As long as the acceleration of the ball is positive, its velocity increases. At the moment when the acceleration vanishes, the velocity of the ball attains the maximum value. The spring is compressed by Δℓ such that mg − kΔℓ = 0, whence Δℓ = mg/k. Thus, when the velocity of the ball attains the maximum value, the ball is at a height h = ℓ − mg/k from the surface of the table.

Teacher's Note: Speed is maximum where net force is zero: weight equals spring force, independent of drop height.

Exam Note: Max speed at a = 0.

Question 1.42. A block can slide along an inclined plane in various directions (figure). If it receives a certain initial velocity v directed downwards along the inclined plane, its motion will be uniformly decelerated, and it comes to rest after traversing a distance ℓ1. If the velocity of the same magnitude is imparted to it in the upward direction, it comes to rest after traversing a distance ℓ2. At the bottom of the inclined plane, a perfectly smooth horizontal guide is fixed. Determine the distance ℓ traversed by the block over the inclined plane along the guide if the initial velocity of the same magnitude is imparted to it in the horizontal direction?

Solution. (Figure: a block on an inclined plane with the horizontal guide at the bottom edge, showing the directions of ℓ1 down the slope, ℓ2 up the slope and the horizontal direction.) Each time the block moves along the inclined plane with a constant deceleration; the magnitudes of the decelerations for the downward motion, upward motion and motion along the horizontal guide are respectively a1 = μg cos α − g sin α, a2 = μg cos α + g sin α, a = μg cos α. Here α is the slope of the inclined plane to the horizontal and μ is the coefficient of friction. Hence a = (a1 + a2)/2. The distances traversed before stopping are ℓ1 = v2/(2a1), ℓ2 = v2/(2a2), ℓ = v2/(2a). Taking into account the relations for a1, a2 and a, we find ℓ = 2ℓ1ℓ2/(ℓ1 + ℓ2). (The book prints a1 twice in the list of accelerations; the second is a2.)

Teacher's Note: Along the horizontal direction on the slope only friction μg cosα acts, the average of the up and down decelerations.

Exam Note: Deceleration is the mean of a1, a2.

Question 1.43. A block is pushed upwards along the roof forming an angle α with the horizontal. The time of the ascent of the block to the upper point was found to be half the time of its descent to the initial point. Determine the coefficient of friction μ between the block and the roof.

Solution. We shall write the equations of motion for the block in terms of projections on the axis directed downwards along the inclined plane. For the upward motion, taking into account all forces (gravity mg, normal reaction N, friction Ffr): mg sin α + μmg cos α = ma1. The corresponding equation for the downward motion is mg sin α − μmg cos α = ma2. Let the distance traversed in upward and downward motion be s. Then s = a1t12/2 = a2t22/2. By hypothesis 2t1 = t2, whence 4a2 = a1. Consequently g sin α + μg cos α = 4(g sin α − μg cos α), and finally μ = 0.6 tan α.

Teacher's Note: Same distance up and down gives a1t12 = a2t22; time ratio 1:2 gives acceleration ratio 4:1.

Exam Note: Equal distances: a ∝ 1/t2.

Question 1.51. A ball moving at a velocity v = 10 m/s hits the foot of a football player. Determine the velocity u with which the foot should move for the ball impinging on it to come to a halt, assuming that the mass of the ball is much smaller than the mass of the foot and that the impact is perfectly elastic.

Solution. Let the foot move at velocity u at the moment of the kick, with u measured along the direction of the ball's motion, so the ball velocity relative to the foot is v − u. After the perfectly elastic impact (heavy foot), the ball's velocity relative to the foot is reversed, −(v − u), so relative to the ground it is u − (v − u) = 2u − v. The ball comes to a halt if 2u − v = 0, i.e. u = v/2 = 5 m/s, directed in the same direction as the ball's motion before the impact. (The book uses the opposite sign convention, v + 2u = 0 with u = −v/2 = −5 m/s, where the minus sign means the same direction as the ball's initial motion.)

Teacher's Note: Heavy foot is unaffected; in its frame the ball rebounds with the same relative speed, then transform back.

Exam Note: Elastic: relative speed reverses. Mind sign convention.

Question 1.52. A body of mass m freely falls to the ground. A heavy bullet of mass M shot along the horizontal hits the falling body and sticks in it. How will the time of fall of the body to the ground change? Determine the time t of fall if the bullet is known to hit the body at the moment it traverses half the distance, and the time of free fall from this height is t0. Assume that the mass of the bullet is much larger than the mass of the body (M >> m). The air drag should be neglected.

Solution. Since, in accordance with the momentum conservation law, the vertical component of the velocity of the body-bullet system decreases after the bullet has hit the body, the time of fall of the body to the ground will increase. Let t0 be the time of free fall from height h. The time in which the body falls half the height without the bullet is t1 = √(h/g) = t0/√2. At the moment the bullet hits, the momentum of the body is directed vertically downwards and equals mv = mgt0/√2. The horizontally flying bullet does not change the vertical component of the momentum of the system, hence the vertical velocity of the body-bullet system will be u = mv/(m + M) = [m/(m + M)] g t0/√2. The time t2 required for the system to traverse the remaining half of the distance is found from h/2 = ut2 + gt22/2. This gives t2 = (t0/√2) [√(m2 + (m + M)2) − m]/(m + M). Thus the total time of fall of the body (t = t1 + t2) is
t = (t0/√2) [√(m2 + (m + M)2) + M]/(m + M) ≈ t0√2 (for M >> m).

Teacher's Note: Horizontal impulse leaves vertical momentum unchanged, so mass increases and vertical speed drops; solve the second half with a quadratic.

Exam Note: Conserve vertical momentum; M >> m gives √2 t0.

Question 1.53. Two bodies of mass m1 = 1 kg and m2 = 2 kg move towards each other in mutually perpendicular directions at velocities v1 = 3 m/s and v2 = 2 m/s (figure). As a result of collision, the bodies stick together. Determine the amount of heat Q liberated as a result of collision.

Solution. (Figure: m1 moves along +x with v1; m2 moves along +y with v2.) We use the momentum conservation law. The x-axis is directed along the velocity v1 of m1 and the y-axis along v2 of m2. After sticking, the bodies fly with velocity u: m1v1 = (m1 + m2)ux, m2v2 = (m1 + m2)uy. The kinetic energy before the collision was Wk = m1v12/2 + m2v22/2. After the collision it is W'k = [(m1 + m2)/2](ux2 + uy2) = (m12v12 + m22v22)/[2(m1 + m2)]. Thus the heat liberated is Q = Wk − W'k = [m1m2/(2(m1 + m2))](v12 + v22) = (2/6)(13) ≈ 4.3 J.

Teacher's Note: Momentum is conserved separately along each perpendicular axis; heat equals kinetic energy lost in the perfectly inelastic collision.

Exam Note: Conserve momentum per axis; Q = loss of KE.

Question 1.54. The inclined surfaces of two movable wedges of the same mass M are smoothly conjugated with the horizontal plane (figure). A washer of mass m slides down the left wedge from a height h. To what maximum height will the washer rise along the right wedge? Friction should be neglected.

Solution. (Figure: two curved wedges of mass M each on a horizontal plane; the washer m starts at height h on the left wedge.) Since there is no friction, external forces do not act on the system in the horizontal direction. To determine the velocity v of the left wedge and the velocity u of the washer immediately after the descent, we use the energy and momentum conservation laws: Mv2/2 + mu2/2 = mgh, Mv = mu. At the moment of maximum ascent hmax of the washer along the right wedge, the velocities of the washer and the right wedge are equal, so mu = (M + m)V, where V is the common velocity of the washer and the right wedge. Energy conservation: mu2/2 = (M + m)V2/2 + mghmax. The joint solution gives hmax = h M2/(M + m)2.

Teacher's Note: Right wedge starts at rest; at maximum height washer and wedge share one velocity.

Exam Note: Common velocity at maximum height; conserve momentum and energy.

Question 1.55. A symmetric block of mass m1 with a notch of hemispherical shape of radius r rests on a smooth horizontal surface near the wall (figure). A small washer of mass m2 slides without friction from the initial position. Find the maximum velocity of the block.

Solution. (Figure: block m1 with a hemispherical notch against a wall on its left; washer m2 starts at the left rim of the notch.) The block will touch the wall until the washer comes to the lowest position. By this instant the washer has acquired the velocity v2 = √(2gr), found from energy conservation. During the subsequent motion the washer climbs the right-hand side of the notch, accelerating the block in the rightward direction until the velocities of the washer and the block become equal. Then the washer slides back down, the block being accelerated until the washer passes through the lowest position again. Thus the block has its maximum velocity at the instant when the washer passes through the lowest position during its backward motion relative to the block. Momentum conservation (from the moment of separation from the wall): m2√(2gr) = m1v1 + m2v2, and energy conservation: m2gr = m1v12/2 + m2v22/2. This system has two solutions: (1) v1 = 0, v2 = √(2gr); (2) v1 = [2m2/(m1 + m2)]√(2gr), v2 = [(m2 − m1)/(m1 + m2)]√(2gr). Solution (1) corresponds to the instants when the washer moves and the block is at rest. We need solution (2): v1,max = 2m2√(2gr)/(m1 + m2).

Teacher's Note: Wall holds block until washer reaches bottom; afterwards it is like an elastic collision.

Exam Note: Discard trivial root v1 = 0.

Question 1.58. A horizontal weightless rod of length 3ℓ is suspended on two vertical strings. Two loads of mass m1 and m2 are in equilibrium at equal distances from each other and from the ends of the string (figure). Determine the tension T of the left string at the instant when the right string snaps.

Solution. (Figure: rod of length 3ℓ hung from two vertical strings at its ends; loads m1 and m2 at distances ℓ and 2ℓ from the left end.) At the moment of snapping of the right string, the rod is acted upon by the tension T of the left string and the forces N1 and N2 from the loads. Since the rod is weightless, the equations of its translatory and rotary motion are −T + N1 − N2 = 0 and N1ℓ = 2N2ℓ (moments about the left end O). Hence N1 = 2N2 (1), and T = N1 − N2 = N2 (2). At the moment of snapping the accelerations of the loads are vertical (point O is stationary and the rod is inextensible) and connected by a2 = 2a1. The equations of motion of the loads are m1g − N1 = m1a1, m2g + N2 = m2a2; with N1 = 2N2: m1g − 2N2 = m1a1, m2g + N2 = 2m2a1. Hence N2 and consequently, by (2), T = N2 = m1m2g/(m1 + 4m2).

Teacher's Note: A massless rod needs zero net force and torque, so N1 = 2N2; geometry links accelerations a2 = 2a1.

Exam Note: Zero net torque on massless rod; a2 = 2a1.

Question 1.61. A smooth washer impinges at a velocity v on a group of three smooth identical blocks resting on a smooth horizontal surface as shown in figure. The mass of each block is equal to the mass of the washer. The diameter of the washer and its height are equal to the edge of the block. Determine the velocities of all the bodies after the impact.

Solution. (Figure: three identical square blocks arranged with edges touching, the outer two in front forming a V-shaped notch with the middle block behind; the washer approaches along the line through the middle contact.) At the moment of impact, only the extreme blocks come in contact with the washer. The force acting on each such block is perpendicular to the contact surface between the washer and the block and passes through its centre (the diameter of the washer equals the edge of the block). Therefore, the middle block remains at rest as a result of the impact. For the extreme blocks and the washer, momentum conservation in the direction of v: mv = 2mu cos 45° + mv' = mu√2 + mv'. Here m is the mass of each block and of the washer, v' is the velocity of the washer after the impact, and u is the velocity of each extreme block. Energy conservation: v2 = 2u2 + v'2. As a result, u = v/√2 and v' = 0. Consequently, the velocities of the extreme blocks after the impact form angles of 45° with the velocity v (each moves at v/√2), the washer stops and the middle block remains at rest.

Teacher's Note: Contact forces pass through block centres, so each outer block moves along 45°; momentum and energy together stop the washer.

Exam Note: Equal masses: head-on elastic transfer.

Download SS Krotov Solutions for JEE Math PDF

Access JEE Mathematics Solutions

Access the complete chapter-wise PDF for S Krotov Physics Solutions 1.1 to 1.61. These structured SS Krotov Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these SS Krotov Solutions for JEE Physics?

They are chapter-wise solved questions from the SS Krotov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the SS Krotov JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these SS Krotov solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising SS Krotov JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.