Advanced Study Material for Computer Science: Programming in C
Explore structured advanced study materials through the Problem Solving Through C Unit 02 Algorithms for Problem Solving Notes Set 01. Tailored for learners, utilizing these Computer Science resources ensures thorough preparation and strengthens foundational knowledge before final evaluations.
Practice Computer Science Resources: Programming in C
View or download the dedicated Problem Solving Through C Unit 02 Algorithms for Problem Solving Notes Set 01 resource below. Engaging with these advanced study guides under focused conditions ensures continuous academic progress and mastery of the 2026-27 curriculum for Programming in C.
This page collects the standard algorithms used to teach problem solving in C, each with a problem definition, a worked example, the algorithm steps and a complete C program. It covers swapping, summation, decimal to binary conversion, reversing digits, GCD, prime testing, selection sort, square root, factorial, Fibonacci, sine series, arrays, matrices and polynomial evaluation.
Exchanging Values of Two Variables
1. Problem definition: Exchanging values of two variables.
2. Analysis: Two variables x and y contains two different values.
3. Swap the values of x and y such that x has y’s value and y has x’s value.
4. Solving by example: Let us consider two variables x and y, containing values 8 and 20 respectively.
5. The original values of x and y are: x = 8, y = 20.
6. The requirement is once the algorithm is performed, the results should be: x = 20, y = 8.
7. If you think by just saying, x=y; y=x; the value gets swapped, then you are mistaken.
8. These instruction are atomic in nature and hence x = y means that the value of ‘x’ is lost.
9. So, we have to use a temporary variable, temp to store the value of ‘x’: temp = x (temp = 8, x = 8, y = 20); x = y (temp = 8, x = 20, y = 20); y = temp (temp = 8, x = 20, y = 8).
10. The value of ‘x’ and ‘y’ is swapped.
Algorithm Definition
Step 1: Start.
Step 2: Get the values of x and y.
Step 3: Store x’s value to temp. (temp := x)
Step 4: Store y’s value to x. So, x has y’s value now (x := y)
Step 5: Store temp’s value (the value of the old ‘x’) in y.
Step 6: Stop.
Example Program: To exchange the values of two variables using a temporary variable
#include <stdio.h>
int main()
{
int x, y, temp;
printf("Enter the value of x and y\n");
scanf("%d%d", &x, &y);
printf("Before Swapping\nx = %d\ny = %d\n",x,y);
temp = x;
x = y;
y = temp;
printf("After Swapping\nx = %d\ny = %d\n",x,y);
return 0;
}Summation of a Set of Numbers
1. Problem Definition: Summation of a set of numbers.
2. Problem Analysis: Given a list of ‘n’ numbers, the algorithm should add up the ‘n’ numbers to find the sum of these values.
3. Solving by Example: Consider a list of 5 numbers: 5, 8, 7, 12, 15.
4. The algorithm takes these numbers as input and should produce the output as 47.
Algorithm Definition
Step 1: Start.
Step 2: Get the values of ‘n’ numbers that need to be summed up.
Step 3: Initialize sum to zero.
Step 4: Initialize i to one.
Step 5: While i is less than or equal to n, do the following steps:
(a) Read the ith number.
(b) Add the ith number to the current value of sum.
(c) Increment i by 1.
Step 6: Print the value of sum.
Step 7: Stop.
To Summation of a set of numbers
#include <stdio.h>
int main()
{
int n, sum = 0, c, value;
printf("Enter the number of integers you want to add\n");
scanf("%d",&n);
printf("Enter %d integers\n",n);
for(c = 1; c <= n; c++)
{
scanf("%d",&value);
sum = sum + value;
}
printf("Sum of entered integers = %d\n",sum);
return 0;
}Decimal Base to Binary Base Conversion
1. Problem Definition: Decimal to binary base conversion.
2. Problem Analysis: A number with base ‘n’ will contain digits from 0 to n-1.
3. Hence decimal base system is 10.
4. We use in our normal containing digits from 0-9.
5. For example, 92210 is a number with base 10.
6. A binary number system has a base 2.
7. Hence it uses just two numbers i.e. 0 and 1.
8. The computer system stores information in the binary number system.
9. The conversion of decimal number to binary number is done by dividing the decimal number by 2 repeatedly and by accumulating the remainders obtained, till the quotient becomes zero.
10. The reverse of the accumulated remainders is the binary, equivalent the decimal number.
11. Solving by Example: Consider the decimal number (18)10.
| Quotient | Remainder |
|---|---|
| 18/2=9 | 0 |
| 9/2=4 | 1 |
| 4/2=2 | 0 |
| 2/2=1 | 0 |
| 1/2=0 | 1 |
Reverse the remainders to obtain the binary equivalent. Hence (18)10 equivalent to (10010)2.
Algorithm Definition
Step 1: Start.
Step 2: Read the decimal number n that has to be converted to binary.
Step 3: Initialize bin to zero.
Step 4: Initialize i to zero.
Step 5: Repeat the following steps until n is greater than zero:
(i) Divide n by 2
(ii) Store the quotient to n
(iii) Add the value (10^i * Remainder) to the value i bin:
[This part will take care reversing the accumulated remainders]
(iv) Increment i by 1
Step 6: Print the value of bin.
Step 7: Stop.
To convert a number from decimal base to binary
#include <stdio.h>
int main()
{
int n, c, k;
printf("Enter an integer in decimal number system\n");
scanf("%d",&n);
printf("%d in binary number system is:\n",n);
for (c = 31; c >= 0; c--)
{
k = n >> c;
if (k & 1)
printf("1");
else
printf("0");
}
printf("\n");
return 0;
}Reversing Digits of an Integer
1. Problem Definition: Reversing the digit of an integer.
2. Problem Analysis: Given a integer number, abcd (say 1234 where a=1, b=2 and so on), the algorithm should convert the number to dcba.
3. Solving by Example: Consider an integer number 7823.
4. The reverse of an integer number is obtained by successively dividing the integer by 10 and accumulating the remainders till the quotient becomes less than 10.
5. The remainder of a division operation can be found out by the mod function.
| Accumulated | Quotient | |
|---|---|---|
| 7823 Mod 10 | 3 | 782 |
| 782 Mod 10 | 32 | 78 |
| 78 Mod 10 | 328 | 7 |
| 7 Mod 10 | 3287 | 0 |
Algorithm Definition
Step 1: Start.
Step 2: Read the integer n to be reversed.
Step 3: Initialize rev to zero.
Step 4: Write ‘n’ is greater than 0, does the following step:
(a) Divide the integer n by 10.
(b) Store the quotient to n.
(c) Multiply 10 to the already existing value of rev.
(d) Add the remainder to the value of rev.
Step 5: Print the value of rev.
Step 6: Stop.
To reverse the digits of an integer
#include <stdio.h>
int main()
{
int n, reverse = 0;
printf("Enter a number to reverse\n");
scanf("%d", &n);
while(n != 0)
{
reverse = reverse * 10;
reverse = reverse + n%10;
n = n/10;
}
printf("Reverse of entered number is = %d\n", reverse);
return 0;
}GCD (Greatest Common Division) of Two Numbers
1. Problem Definition: To find the Greatest Common Divisor (GCD) of two numbers.
2. Problem Analysis: GCD of two numbers is the greatest common factor of the given two numbers.
3. GCD of two numbers is obtained using the following method: Divide the larger of the two numbers by the smaller one.
4. Divide the divisor by the remainder.
5. Repeat this process till the remainder becomes zero.
6. The last divisor is the GCD of the two.
7. Solving by Example: Consider two numbers 188 and 423.
8. The smaller number is 188. Therefore divide 423 by 188.
9. Step 1: 423 divided by 188 gives quotient 2 and remainder 47 (188 x 2 = 376). 47 (Remainder) becomes the divisor and 188 (Divisor) becomes the dividend.
10. Step 2: 188 divided by 47 gives quotient 4 and remainder 0. Since the remainder has become zero, 47 is the GCD of 188 and 423.
Algorithm Definition
Step 1: Start.
Step 2: Read two numbers for which GCD is to be found, say (a, b).
Step 3: Let a be the larger of the two numbers.
Step 4: Divide a by b.
Step 5: Get the remainder of the division operation.
Step 6: Divide the divisor of the previous division operation with the remainder.
Step 7: Repeat steps 4, 5, 6 till the remainder become zero.
Step 8: The divisor of the last division operation performed is the GCD of the two numbers.
Step 9: Stop.
To compute Greatest Common Divisor (GCD) of two numbers
#include <stdio.h>
int gcd(int, int);
int main()
{
int a, b, result;
printf("Enter the two numbers to find their GCD: ");
scanf("%d%d", &a, &b);
result = gcd(a,b);
printf("The GCD of %d and %d is %d.\n", a, b, result);
}
int gcd(int a, int b)
{
while(a!=b)
{
if(a > b)
{
return gcd(a - b, b);
}
else
{
return gcd(a, b - a);
}
}
return a;
}Test Whether a Number is Prime
1. Problem Definition: To verify whether an integer is prime or not.
2. Problem Analysis: Prime number is an integer which is exactly divisible by 1 and itself.
3. For example, 17 is a prime number because 1 and 17 are the only two factors of 17.
4. Generalizing this, a positive integer with just two factors is a prime number.
5. Examples of prime numbers are 2, 3, 5, 7, 11, 13, ......
6. To verify whether a number (say n) is prime or not, divide the number by 2 to n - 1.
7. If the remainder is zero in any of the cases, then the number is not prime (such numbers are called composite).
8. Mathematically, it is also enough to divide the number from 2 to √n.
9. Solving by Example: Let us take two numbers 37 and 49.
10. Consider 37 first. The square root of 37 is 6 (approximately).
11. Now, divide 37 by 2, 3, 4, 5 and 6.
12. None of the division operation gives a remainder of zero.
13. Hence, 37 is a prime number. Now, let us consider 49.
14. The square root of 49 is 7. So let us divide 49 by 2, 3, 4, 5, 6 and 7.
15. As 49 is divisible by 7, it is not a prime numbers.
Algorithm Definition
Step 1: Begin.
Step 2: Read the number n which we want to verify whether prime or not.
Step 3: Initialize the value of the divisor i as 2.
Step 4: Repeat the following steps till i less than or equal to square root of n. (or) the remainder of the division operation is zero.
(I) Divide n by i.
(II) If remainder is zero, then prints the number is not prime and exit the process.
Step 5: If none of the remainders are zero, print n is a prime number.
Step 6: Stop.
To check if the given number is prime
#include <stdio.h>
int main()
{
int n, i, flag=0;
printf("Enter a positive integer: ");
scanf("%d",&n);
for(i=2; i<=n/2; ++i)
{
if(n%i==0)
{
flag=1;
break;
}
}
if(flag==0)
printf("%d is a prime number.",n);
else
printf("%d is not a prime number.",n);
return 0;
}Organize Numbers in Ascending Order
1. Problem Definition: Organize a given set of numbers in ascending order.
2. Problem Analysis: The process of organizing a given set of numbers in ascending/descending order is called sorting.
3. Though there are different flavors of sorting algorithms, selection sort is the one that is widely used.
Algorithm
1. Selection sort involves identifying the smallest number in the array of numbers and placing it in the top of the list.
2. Then the second smaller number is identified and placed second the list.
3. This process continues for n number.
4. Solving by Example: Consider the given array (unsorted list): 22 15 07 12 09 17.
5. Identify the smaller element in the array, the element at position 3 is the smallest.
6. Swap the elements at position 1 and position 3. The array becomes: 07 15 22 12 09 17.
7. Identify the second smallest number at position 5.
8. Swap the elements at position 2 and position 5. The array becomes: 07 09 22 12 15 17.
9. Various snapshots of the sorting process is given below:
| Step | Array after the swap | Sorted part |
|---|---|---|
| 1: 07 is identified as smaller | 07 15 22 12 09 17 | position 1 |
| 2: 09 is identified as the second smaller | 07 09 22 12 15 17 | positions 1 to 2 |
| 3: 12 is identified as the third smallest | 07 09 12 22 15 17 | positions 1 to 3 |
| 4: 15 is identified as the fourth smallest | 07 09 12 15 22 17 | positions 1 to 4 |
| 5: 17 is identified as the fifth smallest | 07 09 12 15 17 22 | all positions |
To organize numbers in ascending order
#include <stdio.h>
void main()
{
int i, j, a, n, number[30];
printf("Enter the value of N \n");
scanf("%d", &n);
printf("Enter the numbers \n");
for(i = 0; i < n; ++i)
scanf("%d", &number[i]);
for(i = 0; i < n; ++i)
{
for(j = i + 1; j < n; ++j)
{
if(number[i] > number[j])
{
a = number[i];
number[i] = number[j];
number[j] = a;
}
}
}
printf("The numbers arranged in ascending order are given below \n");
for(i = 0; i < n; ++i)
printf("%d\n", number[i]);
}Find Square Root of a Number
1. Problem Definition: Find the square root of an integer.
2. Problem Analysis: Square root of a given number n is that natural number which when multiple by itself produces a product n.
3. For example, 2*2=4, so 2 is the square root of 4; 3*3=9, so 3 is the square root of 9.
4. So, if m is a square root of n, then it can be derived that m*m=n and it is symbolically denoted by √n = m.
5. Solving by Example: There are two ways of finding the square root of a number.
6. The first one is the trial-and-error method where we can zero upon the square root by multiplying different numbers to itself and deciding on the number which produces the nearest result.
7. Another method is a bit complicated. For example, let us consider an integer 625.
8. Now, place a bar over every pair of digits starting from the right.
9. The numbers of bar’s indicate the number of digits in the square root. We can divide 625 as 6 | 25.
10. Now, find the largest square root of the first pair which is equal to or less than the first pair.
11. Take the square root of this number as divisor and derive the quotient (here the divisor is 2 and the quotient is 2).
12. Subtract the first pair of numbers (6 - 4 = 2) and bring the next period down (225).
13. Now, double the quotient as it appears (2 doubled is 4) and leaves a blank digit to the right. This is the next divisor.
14. The blank digit should be selected in such a way that multiplying the digit with the number formed as the divisor should be less than equal to or the dividend, For example, here 46 * 6 = 276 is greater than 225.
15. Hence, we select 5 as the digit which satisfies our condition (45* 5=225). Put the digit to the quotient.
16. Hence the square roots of 625 is 25.
To Find square root of a number
#include <stdio.h>
#include <math.h>
int main()
{
printf("sqrt of 16 = %f\n", sqrt(16));
printf("sqrt of 2 = %f\n", sqrt(2));
return 0;
}Factorial Computation
To compute factorial of a given number:
Input: Given the Number to be computed => N.
Output: Factorial of N is Fact.
Step 1: Input Number whose Factorial is to be computed: N.
Step 2: Initialize Fact =1.
Assign N = M.
Step 3: Check if M is greater than 1.
Yes: Assign product of Fact and M to Fact.
Decrement M. Repeat Step 3.
No: Output Factorial of N is Fact.
Step 4: Stop.
To compute factorial of a given number
#include <stdio.h>
int main()
{
int c, n, fact = 1;
printf("Enter a number to calculate its factorial\n");
scanf("%d", &n);
for(c = 1; c <= n; c++)
fact = fact * c;
printf("Factorial of %d = %d\n", n, fact);
return 0;
}Fibonacci Sequence
Algorithm: Fibonacci Series
Input: Range between which Fibonacci Series is to be generated. Low, High
Output: Fibonacci Series.
Step 1: Input Range between which Fibonacci Series is to be generated: Low, High.
Step 2: Assign A=0. Assign B=1.
Step 3: If A is Greater Than or Equal to Low and If B is lesser than or Equal to High
Yes: Output A.
No: Step 4
Step 4: If B is Greater Than or equal to Low and B is lesser than or equal to High
Yes: Output B.
No: Step 5.
Step 5: Assign sum of A and B to C
Step 6: If C is Greater Than or Equal to Low and C is lesser than or Equal to High
Yes: Output C.
No: Stop.
Step 7: Assign A = B, B = C,
Sum A and B to C
Repeat Step 6.
To Generate Fibonacci Series for given range
#include<stdio.h>
int main()
{
int n, first = 0, second = 1, next, c;
printf("Enter the number of terms\n");
scanf("%d",&n);
printf("First %d terms of Fibonacci series are:-\n",n);
for(c = 0; c < n; c++)
{
if(c <= 1)
next = c;
else
{
next = first + second;
first = second;
second = next;
}
printf("%d\n",next);
}
return 0;
}Evaluate ‘sin x’ as Sum of a Series
Input: Number whose sine function is to be computed: X.
Number of iterations to be carried out: N.
Output: Sine of the given Number
Step 1: Input: Number whose sine function is to be computed: X.
Number of iterations to be carried out: N.
Step 2: Initialize Sum = 0.
Den = 1.
Step 3: If N is Equal to One (1),
Yes: Output Sin(x) is X.
No: Step 4.
Step 4: Initialize Flag =1.
Fact = 1
Assign X = Y.
Step 5: Add Sum to flag multiplied by X divided by Fact and assign to sum: (Sum = (Flag * X)/Fact).
Assign the product of X and the Square of Y to X: (X = X * Y ^ 2).
Negate the sign of the flag.
Compute the product of Fact, Den and Den+1 and assign to Fact: (Fact = Fact*Den*(Den+1)).
Increment Den by 2.
Decrement N by 1.
Repeat Step 5 N times.
Step 6: Output the Sum.
To Evaluate ‘sin x’ as Sum of a Series
#include <stdio.h>
#include <math.h>
#include <stdlib.h>
void main()
{
int n, x1;
float accuracy, term, denominator, x, sinx, sinval;
printf("Enter the value of x (in degrees) \n");
scanf("%f", &x);
x1 = x;
/* Converting degrees to radians */
x = x * (3.142 / 180.0);
sinval = sin(x);
printf("Enter the accuracy for the result \n");
scanf("%f", &accuracy);
term = x;
sinx = term;
n = 1;
do
{
denominator = 2 * n * (2 * n + 1);
term = -term * x * x / denominator;
sinx = sinx + term;
n = n + 1;
} while (accuracy <= fabs(sinval - sinx));
printf("Sum of the sine series = %f \n", sinx);
printf("Using Library function sin(%d) = %f\n", x1, sin(x));
}Reverse Order of Elements of an Array
Iterative way
1. Initialize start and end indexes: start = 0, end = n-1
2. In a loop, swap arr [start] with arr [end] and change start and end as follows: start = start + 1, end = end - 1.
Recursion way
1. Initialize start and end indexes: start = 0, end = n-1.
2. Swap arr [start] with arr[end].
3. Recursively call reverse for rest of the array.
4. For example if a is an array of integers with three elements such that a [0] = 1, a [1] = 2, a [2] = 3
5. Then on reversing the array will be a [0] = 3, a [1] = 2, a [2] = 1
To Reverse Order of Elements of an Array
#include <stdio.h>
int main()
{
int n, c, d, a[100], b[100];
printf("Enter the number of elements in array\n");
scanf("%d", &n);
printf("Enter the array elements\n");
for(c = 0; c < n; c++)
scanf("%d", &a[c]);
for(c = n - 1, d = 0; c >= 0; c--, d++)
b[d] = a[c];
for (c = 0; c < n; c++)
a[c] = b[c];
printf("Reverse array is\n");
for(c = 0; c < n; c++)
printf("%d\n", a[c]);
return 0;
}Find Largest Number in Array
Problem Statement
Design an algorithm to find maximum value among a set of N numbers.
Solution
Algorithm Name: Search Max(A, N, R).
Input: A is an array contains N (>=0) number of real numbers.
Output: R will hold the index of the first maximum value in the array A.
Step 1: R = 0.
Step 2: i = 1.
Step 3: WHILE ( i< N )
IF ( A[i] > A[R] ) Then
R = i
EndIf
i = i + 1
EndWhile.
Step 4: Return.
To Find Largest Number in Array
#include <stdio.h>
int main()
{
int array[100], maximum, size, c, location = 1;
printf("Enter the number of elements in array\n");
scanf("%d", &size);
printf("Enter %d integers\n", size);
for(c = 0; c < size; c++)
scanf("%d", &array[c]);
maximum = array[0];
for (c = 1; c < size; c++)
{
if(array[c] > maximum)
{
maximum = array[c];
location = c+1;
}
}
printf("Maximum element is present at location %d and it's value is %d.\n", location, maximum);
return 0;
}Print Elements of Upper Triangular Matrix
Input: The Square Matrix of length N.
Output: The Upper Triangle Matrix.
Step 1: Input The Order of the Matrix: m x n.
Step 2: Input The Elements of the Matrix A[I, J].
Step 3: Initialize i, j.
Step 4: Check if i< rows and increment i(i++).
Step 5: Check if j< column and increment j(j++).
Print a[i][j].
Stop.
To Print Elements of Upper Triangular Matrix
#include <stdio.h>
int main()
{
int a[3][3],i,j;
float determinant=0;
printf("Enter the 9 elements of matrix: ");
for(i=0;i<3;i++)
for(j=0;j<3;j++)
scanf("%d",&a[i][j]);
printf("\nThe matrix is\n");
for(i=0;i<3;i++)
{
printf("\n");
for(j=0;j<3;j++)
printf("%d\t",a[i][j]);
}
printf("\nSetting zero in upper triangular matrix\n");
for(i=0;i<3;i++)
{
printf("\n");
for(j=0;j<3;j++)
if(i>=j)
printf("%d\t",a[i][j]);
else
printf("%d\t",0);
}
return 0;
}Multiplication of Two Matrices
1. Given two matrices A and B of orders m*n and p*q respectively.
2. This algorithm multiplies the two matrices and stores the result in matrix C of order m*q. I, J, K denotes array indices.
Algorithm of multiplication of two matrices
Input: Two matrixes.
Output: Output matrix C.
Matrix-Multiply(A, B)
if columns [A] ≠ rows [B]
then error "incompatible dimensions"
else
for i = 1 to rows [A]
for j = 1 to columns [B]
C[i, j] = 0
for k = 1 to columns [A]
C[i, j] = C[i, j] + A[i, k] * B[k, j]
return C.
Algorithm Description
1. To multiply two matrixes sufficient and necessary condition is "number of columns in matrix A = number of rows in matrix B".
2. Loop for each row in matrix A.
3. Loop for each columns in matrix B and initialize output matrix C to 0.
4. This loop will run for each rows of matrix A.
5. Loop for each columns in matrix A.
6. Multiply A[i, k] to B[k, j] and add this value to C[i, j].
7. Return output matrix C.
Evaluate a Polynomial
The polynomial equation formula is P(x) = anxn + an-1xn-1 + ... + a2x2 + a1x + a0
Here is source code of the C program to evaluate the given polynomial equation.
#include <stdio.h>
#include <conio.h>
#include <stdlib.h>
#define MAXSIZE 10
void main()
{
int a[MAXSIZE];
int i, N, power;
float x, polySum;
clrscr();
printf("Enter the order of the polynomial\n");
scanf("%d", &N);
printf("Enter the value of x\n");
scanf("%f", &x);
/*Read the coefficients into an array*/
printf("Enter %d coefficients\n",N+1);
for (i=0;i <= N;i++)
{
scanf("%d",&a[i]);
}
polySum = a[0];
for(i=1;i<=N;i++)
{
polySum = polySum * x + a[i];
}
power = N;
/*power--;*/
printf("Given polynomial is:\n");
for (i=0;i<=N;i++)
{
if (power < 0)
{
break;
}
/* printing proper polynomial function*/
if (a[i] > 0)
printf(" + ");
else if (a[i] < 0)
printf(" - ");
else
printf(" ");
printf("%dx^%d ",abs(a[i]),power--);
}
printf("\nSum of the polynomial = %6.2f\n",polySum);
}Free study material for Computer Science
Useful Resources and Notes for Computer Science Programming in C
Quick Revision Material for Programming in C
Explore essential learning tools for Computer Science Programming in C. This curated collection features in-depth notes and targeted practice questions built around the active 2026 curriculum to streamline your daily revision.
Expert Notes and Solved Exam Questions
Built using official NCERT guidelines for Computer Science, these materials provide reliable academic support. Integrating past examination questions and step-by-step solutions helps students understand official CBSE grading criteria.
Additional Study Resources for
Maximize your grade potential by utilizing Computer Science practice papers in tandem with these structured notes. All printable assignments and interactive mock tests on our platform are updated for the 2026 session and available free of charge.
FAQs
The latest 2026-27 advanced study resources for Computer Science are available for free on StudiesToday.com which includes NCERT Exemplars, high-order thinking skills (HOTS) questions, and deep-dive concept summaries.
Our exhaustive Computer Science package includes chapter wise revision notes, solved practice sheets, important formulas and Concept Maps to help in better understanding of all topics.
Yes. For , our resources have been developed to help you get better marks in school exams and also build fundamental strength needed for entrance tests including Competency Based learning.
in , students should use Active Recall method, read the concept summary, then solve the Important Questions section without looking at the answers and then check your answers.
All Computer Science study materials are provided in mobile-friendly PDF. You can download and save them on your device.
Yes, our team has ensured that all Computer Science materials for are strictly aligned with the National Education Policy (NEP) 2020 and the latest 2026-27 syllabus.