P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 4

Download JEE Chemistry P Bahadur Textbook Solutions: Chapter 20 Qualitative Estimations

Explore reliable textbook solutions for Chapter 20 Qualitative Estimations tailored for JEE learners using P Bahadur methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Access P Bahadur Textbook Answers and Solutions

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chapter 20 Qualitative Estimations - IIT-JEE Model Papers (Solutions)

Solution of Model Paper 1-B (Section A to E)

Question 1. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (d) SO2I2 is unstable.

Teacher's Note: Sulphuryl iodide does not exist stably; iodine is too large and weakly oxidising to bond so.

Exam Note: Cite instability of SO2I2.

Question 2. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (a) As the size of the alkyl group bonded to O increases, the repulsive forces between them increase, causing an expansion of the bond angle.

Teacher's Note: Bulkier groups on oxygen repel each other and widen the C–O–C angle.

Exam Note: Link angle increase to steric repulsion.

Question 3. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (a) Rate of reaction always increases with temperature, as r = KCRn. Also K = Ae−Ea/RT. A first-order reaction never goes to completion.

Teacher's Note: Rate constant K rises exponentially with T, so rate rises; first-order decay is asymptotic.

Exam Note: Quote Arrhenius K = Ae^(-Ea/RT).

Question 4. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (b) (H2O + H2O ⇌ H3O+ + OH−)
Ka,p = Kw/[H2O]2 = 10−14/(55.6)2 = 3.23 × 10−18
Also Kc = Kw/[H2O] = 10−14/55.6 = 1.8 × 10−16
The rest are all wrong.

Teacher's Note: Water's [H2O] = 55.6 M must be included when converting Kw to Ka; checking: 10^-14/3091 = 3.23×10^-18.

Exam Note: Divide Kw by 55.6 squared, not once.

Question 5. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (c) PV = nRT, so PV/n = RT = constant, since T is independent of mass.

Teacher's Note: PV/n equals RT, which depends only on temperature, not on amount of gas.

Exam Note: State PV = nRT first, then argue constancy.

Question 6. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (c) hν = hν0 + ½mu²
Ep = 9E + ½mu² [for Li2+, E1 = E1H × z²]
u = √(2(Ep − 9E)/m)

Teacher's Note: Photon energy = threshold + kinetic energy; Li2+ levels scale by Z² = 9 relative to hydrogen.

Exam Note: Write energy balance, then substitute Z² = 9.

Question 7. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (a) M2 is a metal and M1 is a non-metal. M2OH is a base (e.g. NaOH); M1OH is an acid (e.g. HOCl).

Teacher's Note: Metal hydroxides are basic, non-metal hydroxides (oxoacids) are acidic.

Exam Note: Give one example each: NaOH, HOCl.

Question 8. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (b) The bromoalkene C6H5(C6H5)C=C(H)Br with KNH2 loses HBr to give C6H5–C≡C–C6H5 (diphenylacetylene).

Teacher's Note: Strong base KNH2 eliminates HBr from a vinyl bromide to form the alkyne.

Exam Note: Show dehydrohalogenation giving the triple bond.

Question 9. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (a, c) 24Cr: 1s2 2s2 2p6 3s2 3p6 3d5 4s1. Also it signifies the shape and energy level for a poly-electronic atom.

Teacher's Note: Half-filled 3d5 4s1 is Cr's exceptional, more stable configuration.

Exam Note: Write 3d5 4s1, not 3d4 4s2.

Question 10. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (b, c, d) x/m is a function of T at constant P; Ea for free-radical combination is zero; at equilibrium Cp = ∞, Cp = ΔH/ΔT, ΔT = 0. Also pOH = pKb + log([C.A.]/[Base]); [C.A.] = [NH4+] = 3 M and [Base] = 1 M.

Teacher's Note: Adsorption extent depends on temperature; radical recombination needs no activation energy.

Exam Note: State each fact briefly with its condition.

Question 11. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (a, c, d) All are facts.

Teacher's Note: Statements a, c and d are accepted facts; b is not.

Exam Note: Mark all correct options for multi-answer MCQs.

Question 12. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (a, b, d) (NH4)2SO4 → NH3 + NH4HSO4; NH2OH → N2 + NH3 + 3H2O

Teacher's Note: Both are thermal decompositions: ammonium sulphate loses NH3; hydroxylamine disproportionates.

Exam Note: Write balanced decomposition equations.

Question 13. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. (a, b) Cyclobutyl–CH=CH2 + H+ gives the cyclobutyl–CH+–CH3 carbocation, which undergoes ring expansion to a cyclopentyl carbocation carrying a methyl group; with OH− this gives the cis and trans isomers of the methylcyclopentanol (CH3 and OH on neighbouring ring carbons, with H on the ring carbons).

Teacher's Note: Strained four-membered ring expands to a stable five-membered carbocation; attack gives cis and trans products.

Exam Note: Mention ring expansion and cis/trans products.

Question 14. (Question statement is not printed in the source book pages for this job; solution given below.)

Solution. Two. Meq. of NaOH + ½ Meq. of Na2CO3 = 25 × 0.1 = 2.5 (HPh is the indicator).
Meq. of NaOH + Meq. of Na2CO3 = 30 × 0.1 = 3.0 (MeOH is the indicator).
∴ ½ Meq. of Na2CO3 = 0.5, so Meq. of Na2CO3 = 1.0 and Meq. of NaOH = 2.

Teacher's Note: Phenolphthalein neutralises NaOH plus half of Na2CO3; methyl orange neutralises both fully. Subtract to get Na2CO3.

Exam Note: Subtract the two titre equations.

Question 15. The ratio of vertices in truncated octahedron and truncated tetrahedron is :

Solution. Two. A truncated octahedron has 24 vertices and 36 edges, whereas a truncated tetrahedron has 12 vertices and 18 edges. Ratio = 24/12 = 2.

Teacher's Note: Truncation turns each original vertex into several; count 24 and 12.

Exam Note: Quote vertex counts 24 and 12.

Question 16. If T1 = 800 K and T2 = 300 K, the ratio of urms at T1 : ump at T2 respectively for He is :

Solution. Two. urms/ump = √(3 × 800)/√(2 × 300) = √4 = 2.

Teacher's Note: u_rms = √(3RT/M) and u_mp = √(2RT/M); same gas, so M cancels.

Exam Note: Use the 3 and 2 factors correctly.

Question 17. λHe+ for a transition is 22.8 nm. The λH for the corresponding transition will be ........ times of λHe+.

Solution. Four. λH = λHe+ × Z2He (wavelength is inversely proportional to Z²; ZHe = 2, ZH = 1), so the factor is 4.

Teacher's Note: For hydrogen-like ions 1/λ ∝ Z², so smaller Z gives longer wavelength.

Exam Note: Use 1/λ ∝ Z²; ratio is 4.

Question 18. Number of regular hexagonal faces in a truncated tetrahedron.

Solution. Four.

Teacher's Note: A truncated tetrahedron has 4 hexagonal and 4 triangular faces.

Exam Note: Recall 4 hexagons + 4 triangles.

Question 19. How much of the following will reduce —CONH2 to —NH2 : Br2 + NaOH, H2/Ni, Na/C2H5OH, LiAlH4/ether, NaOBraq ?

Solution. Two (Br2 + NaOH and NaOBr, i.e. Hofmann bromamide degradation, which converts —CONH2 to —NH2 with loss of one carbon).

Teacher's Note: Hofmann reagents give the amine directly; LiAlH4 gives CH2NH2.

Exam Note: Name the Hofmann degradation.

Question 20. How much of the following are condensation polymers : terylene, bakelite, glyptal, melamine, polyacrylonitrile, polyvinyl chloride ?

Solution. Four (terylene, bakelite, glyptal and melamine polymers are condensation polymers).

Teacher's Note: Condensation polymers lose small molecules; polyacrylonitrile and PVC are addition polymers.

Exam Note: Separate addition from condensation polymers.

Question 21. How much of the following leave no residue on strong heating : dry ice, NH4NO3, NH4NO2, NH4Cl, (NH4)2Cr2O7 ?

Solution. Four (all except (NH4)2Cr2O7, which leaves Cr2O3).

Teacher's Note: Dichromate decomposes to solid green Cr2O3; the others give only gases.

Exam Note: Remember Cr2O3 residue from dichromate.

Question 22. Match the following (one or more matches are possible) : A. Zone refining, B. Van Arkel method, C. Pyrometallurgy, D. Self reduction with (a) Boron (b) Silicon (c) Hg (d) Cu (e) Pb.

Solution. A-a, b; B-b, c; C-c, d, e; D-c, d, e (as printed in the book; the key line for B is hard to read in the scan, flag for human check).

Teacher's Note: Zone refining suits semiconductors; self-reduction suits Cu, Hg, Pb sulphides.

Exam Note: Match method to metal purity or ore type.

Question 23. Match the following : A. E1 elimination reactions, B. E2 elimination reactions, C. SN1 reaction, D. SN2 reaction with (a) II order, (b) trans-chlorofumaric acid → (NaOH) but-2-yne-1,4-dioic acid, (c) (CH3)3C–X → (KOH) (CH3)2C=CH2, (d) CH3CH2OH → (dehydrating agent) CH2=CH2, (e) I order, (f) R–X + :Nu → Product + X−.

Solution. A-c, d, e; B-a, b; C-e, f; D-a, f

Teacher's Note: E1 and SN1 are first order via carbocation; E2 and SN2 are second order.

Exam Note: Relate order to mechanism step.

Question 24. Select the incorrect statement about the Fe(II) complex in haemoglobin : (a) It is a square planar complex (b) eg > t2g (c) It is a high spin complex (d) Δsp is large

Solution. (d)

Teacher's Note: Answer as printed; the passage is about d-orbital splitting patterns.

Exam Note: Read the splitting diagram before choosing.

Question 25. If Δ0 is large compared to the pairing energy then which one is correct : (a) The d-electrons will fill eg orbitals completely before they occupy t2g level in high spin complex (b) The d-electrons will fill t2g orbitals completely before they pair in the eg orbital in low spin complex (c) The high spin configuration has the maximum number of unpaired d-electrons (d) The high spin configuration has the minimum number of unpaired d-electrons

Solution. (c)

Teacher's Note: High-spin means maximum unpaired electrons; large Δ0 favours low spin.

Exam Note: Compare Δ0 with pairing energy.

Question 26. Select the incorrect fact : (a) All d8 square planar complexes are low spin (b) All d8 square planar complexes have Δsp relatively high (c) There are no low spin tetrahedral complexes (d) In tetrahedral complex Δt is relatively large

Solution. (d) Δt is small (about 4/9 of Δ0) in tetrahedral complexes, so they are always high spin.

Teacher's Note: Tetrahedral splitting is small, hence high spin only.

Exam Note: Recall Δt = (4/9)Δ0.

Question 27. Select the incorrect statement : (a) The t2g set of orbitals can accommodate a maximum of six electrons (b) The five d-orbitals in a metal ion develop non-degeneracy in presence of ligand (c) The value of Δ0 depends upon the nature of ligand in an octahedral complex (d) A high spin d6 complex is diamagnetic

Solution. (d) A high-spin d6 octahedral complex has four unpaired electrons, so it is paramagnetic.

Teacher's Note: t2g^4 eg^2 high-spin d6 has 4 unpaired electrons.

Exam Note: Count unpaired electrons to judge magnetism.

Question 28. For the reaction [Pb2Fe(CN)6](s) + 4I− ⇌ 2PbI2 + [Fe(CN)6]4−, the equilibrium constant is K1. If Ksp1 and Ksp2 are the solubility products of PbI2 and Pb2[Fe(CN)6] respectively, then : (a) K1 = Ksp2/Ksp1 (b) K1 = Ksp1/Ksp2 (c) K1 = Ksp2/(Ksp1)2 (d) K1 = (Ksp1)2/Ksp2

Solution. (c). Combining Pb2Fe(CN)6 ⇌ 2Pb2+ + [Fe(CN)6]4− (Ksp2) with 2 × (Pb2+ + 2I− ⇌ PbI2), each of constant 1/Ksp1, gives K1 = Ksp2/(Ksp1)2. Verified.

Teacher's Note: Reversed equation inverts K; doubling the equation squares it.

Exam Note: Invert and square the PbI2 Ksp.

Solution of Model Paper 2-A (Section A to E)

Question 1. Which one is not correct about the reaction RC≡CLi + R'X → RC≡CR' : (a) C–C bond formed in product is heterolytically formed (b) Carbon atom attached to Li in RC≡CLi acts as nucleophile (c) Carbon atom attached to X in R'X acts as electrophile (d) Carbon atom attached to X is electron rich

Solution. (d) Carbon atom attached to X (electronegative) becomes electron deficient because X pulls the electron pair towards itself.

Teacher's Note: Halogen polarises C–X so carbon is δ+, hence electrophilic.

Exam Note: State C–X carbon is electron deficient.

Question 2. Select the incorrect statement : (a) Lithium acetylide is stronger base than water (b) LiNH2 is stronger base than lithium acetylide (c) Acetylene is stronger acid than NH3 (d) Li+NH2− is a salt of strong acid

Solution. (d) Li+NH2− is a salt of the weak acid H–NH2.

Teacher's Note: NH3 is an extremely weak acid, so its conjugate base is very strong.

Exam Note: Strong base implies weak conjugate acid.

Question 3. The value of molal ebullioscopic constant for a solvent determined using solution of solute A is found to be 5.12 K molality−1. The value of molecular ebullioscopic constant for the same solvent using solution of solute B in the same solvent will be : (a) 51.2 K−1 mol−1, 0.1 kg solvent (b) 512 K−1 mol−1, 0.1 kg solvent (c) 5.12 K−1 mol−1, 0.1 kg solvent (d) cannot be predicted

Solution. (a) The molecular ebullioscopic constant = 10 × the molal ebullioscopic constant (it is per 100 g of solvent), i.e. 51.2.

Teacher's Note: Kb is solvent property, independent of solute; molecular form uses 100 g solvent.

Exam Note: Convert per kg to per 0.1 kg: multiply by 10.

Question 4. Which of the following is strongest oxidant : (a) FeO42− (b) MnO42− (c) VO43− (d) CrO42−

Solution. (a) Fe normally exists in +2 or +3. In ferrate it exists as +6 and is thus easily reduced to Fe3+. Also stability order: VO43− > CrO42− > MnO42− > FeO42− > CoO42−.

Teacher's Note: Higher-than-usual oxidation state of Fe (+6) is unstable, so strongly oxidising.

Exam Note: Link unusual +6 state to oxidising power.

Question 5. AlCl3·6H2O on heating liberates : (a) Cl2 (b) HCl (c) H2O (d) None of these

Solution. (b) AlCl3·6H2O → AlCl3 + 6H2O; AlCl3 + 3H2O → Al(OH)3 + 3HCl (hydrolysis gives HCl).

Teacher's Note: Hydrated chloride of a small, highly charged ion hydrolyses on heating instead of just dehydrating.

Exam Note: Write the hydrolysis equation giving HCl.

Question 6. Which reaction occurs if Fe rod is placed in Fe(NO3)3 solution : (a) Fe3+ + 3e → Fe (b) Fe → Fe3+ + 3e (c) 2Fe3+ + Fe → 3Fe2+ (d) Fe2+ → Fe3+ + e

Solution. (c) 2Fe3+ + Fe → 3Fe2+, E° = 1.21 V, so a miniature cell is formed. (Check: E° = 0.77 − (−0.44) = 1.21 V.)

Teacher's Note: Positive E° from Fe3+/Fe2+ (+0.77 V) and Fe2+/Fe (−0.44 V) makes comproportionation spontaneous.

Exam Note: Show E° = 1.21 V is positive.

Question 7. The complex [Co(NH3)5Br]2+ having purple colour, in presence of acidic water produces the solution having colour : (a) Pink (b) Blue (c) Red (d) Green

Solution. (a) [Co(NH3)5Br]2+ (purple) + H2O → [Co(NH3)5H2O]3+ (pink-orange) + Br−.

Teacher's Note: Water replaces bromide ligand, changing the crystal-field splitting and colour.

Exam Note: Write aquation equation with colour change.

Question 8. Which of the following is incorrect : (a) Na3BO3 exist but Na3PO3 not (b) H3BO3 is monobasic but H3PO3 is dibasic (c) H-atoms attached on the O-atom in oxoacids usually represents their 'n' factor (d) n-factor of a substance is independent of chemical reaction.

Solution. (d) HNO3 → H+ + NO3− (n-factor = 1); 2HNO3 → H2O + 2NO + 3O (n-factor = 3).

Teacher's Note: n-factor depends on the reaction (acid-base vs redox).

Exam Note: Contrast n = 1 and n = 3 for HNO3.

Question 9. Select the incorrect statement : (a) (∂Tf/∂m)m→0 depends on the characteristic of solvent. (b) For solvents obeying Trouton's rule Kb ∝ MTb. (c) The classification of solute and solvent in a solution is a matter of convenience only. (d) Trouton's rule = ΔfH/Tf

Solution. (d) Trouton's rule is ΔvH/Tb = 10.5R, and Kb = RTb2M/(ΔvH × 1000) = RMTb/(1000 × 10.5R) ∝ MTb.

Teacher's Note: Trouton's rule relates vaporisation, not fusion, enthalpy to boiling point.

Exam Note: Write ΔvH/Tb = 10.5R.

Question 10. Which of the following metal chlorides does not give chromyl chloride test : (a) HgCl2 (b) SnCl2 (c) SbCl3 (d) AgCl

Solution. (a, b, c) All these are covalent chlorides. Only ionic chlorides give the chromyl chloride test.

Teacher's Note: Test needs free Cl⁻ ions; covalent chlorides do not supply them.

Exam Note: Classify chlorides as covalent or ionic.

Question 11. Which of the following gases turns KI-soaked starch paper blue : (a) NO2 (b) F2 (c) Cl2 (d) O3

Solution. (b, c, d) 2KI + X2 → 2KX + I2 (X is F, Cl, Br). NO2 + H2SO4 + 2KI → K2SO4 + H2O + NO + I2 (only in acidic medium). O3 + 2KI + H2O → 2KOH + I2 + O2.

Teacher's Note: Any oxidant that frees I2 turns starch blue-black.

Exam Note: Name oxidant releasing I2.

Question 12. Select the correct statements : (a) In the electrolytic cell cathode works as electron sink like electrochemical cell (b) In the electrolytic cell electrons are sucked out of the anode by the positive terminal of external battery (c) In the electrolytic cells the electrons flow from cathode to anode through external wires (d) Cathode of electrolytic cell is negative electrode

Solution. (a, b, d) Electrons are sucked out from the anode and flow towards the cathode through the external wire; (b, c are explanations to a).

Teacher's Note: Electrons flow anode to cathode externally in every cell.

Exam Note: Give electron flow direction.

Question 13. Select the correct statements about hexagonal closest packed structure and cubic closest packed structure for a given element : (a) Both have same density (b) Both have the same co-ordination number (c) Both have the same packing fraction (d) Both have different co-ordination number

Solution. (a, b, c)

Teacher's Note: Both hcp and ccp have coordination number 12 and packing fraction 74%.

Exam Note: State CN 12 and 74% for both.

Question 14. Match the following : A. BrF5, B. PCl5, C. SF6, D. XeOF4 with 1. Distorted geometry, 2. Non polar, 3. Polar, 4. One lone pair

Solution. A-1, 3, 4; B-2; C-2; D-1, 3, 4

Teacher's Note: BrF5 and XeOF4 are square pyramidal with one lone pair, hence polar.

Exam Note: Draw VSEPR shapes before matching.

Question 15. Match the following : A. CH3+, B. CH3•, C. CH3−, D. CH4 with 1. sp, 2. sp2, 3. sp3, 4. sp3d

Solution. A-2; B-3; C-3; D-3 (as printed in the book; methyl radical is often taken as sp2, flagged for human check).

Teacher's Note: Carbocation is planar sp2; carbanion and methane are sp3.

Exam Note: Link hybridisation to electron pairs.

Question 16. Addition of HBr to 1,3-butadiene yields both 1,2- and 1,4-products. The proportion in which 1,2- and 1,4-products are formed is markedly affected by the temperature: at −80°C the product is 80% CH3·CHBrCH=CH2 (1,2) + 20% CH3·CH=CH·CH2Br (1,4); at 40°C it is 20% 1,2 + 80% 1,4. The proportion of products actually isolated at the low temperature addition is determined by : (a) Equilibrium between two isomers (b) Higher value of rate constant for 1,4-addition (c) Higher value of rate constant for 1,2-addition (d) None of the above

Solution. (c) The fact that 1,2-product is more than 1,4-product at −80°C is that formation of 1,2-product is faster, since each compound remains unchanged at −80°C. The proportion in which they are isolated shows the proportion in which they are formed.

Teacher's Note: Low temperature gives kinetic control: faster-forming 1,2-product dominates.

Exam Note: Name kinetic versus thermodynamic control.

Question 17. The proportion of products for the high temperature addition is determined by : (a) Equilibrium between two isomers (b) Higher value of rate constant for 1,4-addition (c) Higher value of rate constant for 1,2-addition (d) None of the above

Solution. (a) As the temperature rises, the conversion of 1,2-product into 1,4-product becomes more rapid and attains equilibrium. There is faster conversion of products initially formed into the equilibrium mixture at higher temperature.

Teacher's Note: High temperature gives thermodynamic control: the more stable 1,4-product dominates at equilibrium.

Exam Note: Say products equilibrate at high temperature.

Question 18. Total number of structural isomers of the compound C5H10O.

Solution. Seven

Teacher's Note: Printed answer; count carbonyl isomers: four aldehydes plus three ketones.

Exam Note: Count systematically by chain.

Question 19. Total number of stereoisomers of the compound C5H10O.

Solution. Two

Teacher's Note: Printed answer; chiral carbonyl isomer 2-methylbutanal gives a pair of enantiomers.

Exam Note: Look for chiral carbon.

Question 20. How much salts given below during electrolysis produce a solution of pH > 7 ? NaCl(aq.); (NH4)2SO4(aq.); FeCl3(aq.); CH3COONa; CuSO4(aq.); KNO3(aq.); Ni(NO3)2(aq.); KCN

Solution. Two

Teacher's Note: Printed answer; electrolysis of NaCl(aq) leaves NaOH; decide for each salt whether OH⁻ accumulates.

Exam Note: Track which ions remain in solution.

Question 21. How much compounds possess weak electrolyte nature ? CH3COONH4; Phenolphthalein; H2C2O4; CCl3COOH; NH4CN; Methyl orange; NH4OH; CH3COOH

Solution. Five

Teacher's Note: Printed answer; weak acids and bases such as H2C2O4, NH4OH and CH3COOH ionise only slightly.

Exam Note: Separate salts from weak acids and bases.

Question 22. Number of compounds which can be used only as oxidant from the given list : HClO4; HNO3; H2S; SO3; CO2; SO2; H3PO4; F2; CO; HNO2

Solution. Six (HClO4, HNO3, SO3, CO2, H3PO4, F2, each with the central atom in its highest oxidation state; verified count).

Teacher's Note: Only-oxidant means central element already in maximum oxidation state.

Exam Note: Check maximum oxidation state.

Question 23. What is the value of X in HxCr(CO)5 ?

Solution. Two. EAN of Cr = 36, so 36 = 24 + (2 × 5) + x, giving x = 2.

Teacher's Note: Effective atomic number rule: each CO donates 2 electrons.

Exam Note: Apply EAN = Z − oxidation state + 2 × ligands.

Question 24. Number of positrons given out during nuclear fusion of 11H to produce one particle of 42He.

Solution. Two. 4 11H → 42He + 2 0+1e + hν

Teacher's Note: Balance charge: four protons (+4) equal He (+2) plus two positrons (+2).

Exam Note: Balance charge and mass number.

Question 25. How much of the following salts will show an increase in their solubility in presence of 1 N HNO3 ? AgCN, AgCl, AgBr, CaF2, AgF, Ag2CO3, AgI, CaCl2

Solution. Four : AgCN, AgF, Ag2CO3, CaF2 (those which possess strong basic nature of anion).

Teacher's Note: Anions of weak acids (CN⁻, F⁻, CO3²⁻) are protonated by HNO3, pulling solubility up.

Exam Note: Check whether anion is a weak-acid conjugate base.

Solution of Model Paper 2-B (Section A to D)

Question 1. Acid dehydration of cyclobutyl carbinol is : (a) methylenecyclobutane (b) cyclopentene (c) a cyclopropane-ring structure (d) None of these (structures are drawn in the book; option (b) is the five-membered ring alkene).

Solution. (b) Cyclobutylmethanol + H+ → cyclobutyl–CH2OH2+ → (−H2O) primary carbocation, which undergoes ring expansion to the cyclopentyl carbocation; loss of H+ gives cyclopentene.

Teacher's Note: Primary carbocation rearranges by ring expansion to a relieved five-membered ring.

Exam Note: Show ring expansion then proton loss.

Question 2. Arrange the following in the increasing order of s-character in central atom (hybrid orbital) : (a) PH3 = NH3 = NCl3 > N3− (b) PH3 < NCl3 < NH3 < N3− (c) NH3 < PH3 < NCl3 < N3− (d) PH3 = NH3 = NCl3 < N3−

Solution. (d) PH3: sp3; NCl3: sp3; NH3: sp3; N3−: the book prints sp2. Corrected: the central N of N3− is sp (linear), still giving the highest s-character, so the answer (d) is unchanged.

Teacher's Note: Three sp3 species are equal; the linear azide has highest s-character.

Exam Note: Give hybridisation of each species.

Question 3. The correct order of bond length of Si–O, P–O, S–O and Cl–O in SiO44−, PO43−, SO42− and ClO4− is : (a) ClO4− > SO42− > PO43− > SiO44− (b) PO43− > SiO44− > SO42− > ClO4− (c) SiO44− > PO43− > SO42− > ClO4− (d) SO42− > SiO44− > PO43− > ClO4−

Solution. (c) Atomic radius decreases along the period.

Teacher's Note: Smaller central atom and more π-bonding shorten the bond going from Si to Cl.

Exam Note: Use period trend Si to Cl.

Question 4. In O2F2, which of the following statement is correct : (a) O–F bond length in O2F2 is longer than O–F bond length in OF2 (b) The O.N. of oxygen in O2F2 is +1 (c) The O–O bond length in O2F2 is shorter than O–O bond length in H2O2 (d) All of the above

Solution. (d) The facts rest on geometry: formal charge picture H–O−1… F–O+1… in which O− is larger than O+ and O2+ (size of O− > size of O+ > size of O2+).

Teacher's Note: Positive character on O in O2F2 shortens O–O and lengthens O–F.

Exam Note: Use oxidation number +1 for O in O2F2.

Question 5. Select the incorrect reaction : (a) CH2=CH2 + Br2 (NaCl/H2O) → BrCH2·CH2Br + BrCH2·CH2Cl + BrCH2·CH2OH (b) CH2=CH2 + Br2 (NaI aq.) → BrCH2CH2Br + BrCH2·CH2I (c) CH2=CH2 + I2 (CCl4) → CH2I–CH2I (d) CH2=CH2 + I2 (CCl4) → CH2Cl–CH2I

Solution. (c) as printed. The book's explanation: iodine in presence of CCl4 gives the chloro-iodo derivative (mixed halides). Note for human check: CCl4 is an inert solvent and cannot supply Cl, so option (d) looks chemically the incorrect one; the printed key is (c).

Teacher's Note: Mixed halo products form when other nucleophiles (Cl⁻, I⁻, H2O) are present with Br2.

Exam Note: Know the bromonium ion is opened by any nucleophile.

Question 6. A sample of H2O2 solution labelled as 33.6 volume has density (d) g litre−1. Mark the incorrect option representing concentration of same solution in other units. (Assume that solution contains only H2O and H2O2). (a) Mole fraction of H2O2 in the solution = 54/(1000d − 102) (b) Normality = 6 N (c) Molarity (M) = 6M (d) Molality (m) = 3000/(1000d − 102)

Solution. (c) MH2O2 = volume strength/11.2 = 33.6/11.2 = 3M, so N = 6N. That is, 3 mol H2O2 in 1 litre solution, i.e. in 1000d g of solution; mass of water = (1000d − 34 × 3) g = (1000d − 102) g; mH2O2 = 3 × 1000/(1000d − 102). Mole fraction of H2O2 = 3/(3 + (1000d − 102)/18) = 54/(54 + 1000d − 102) = 54/(1000d − 48). Corrected: by this working option (a) as printed (54/(1000d − 102)) is also incorrect (the right value is 54/(1000d − 48)); the book's key is (c).

Teacher's Note: Volume strength divided by 11.2 gives molarity (3 M), not normality; molarity is not 6 M.

Exam Note: Use M = volume strength / 11.2.

Question 7. Number of regular hexagonal faces and regular tetrahedral faces in truncated tetrahedron are respectively : (a) 2, 4 (b) 4, 4 (c) 6, 4 (d) 4, 6

Solution. (b) These are facts about the truncated tetrahedron (4 hexagonal and 4 triangular faces).

Teacher's Note: Cutting four corners of a tetrahedron gives 4 triangles and turns 4 faces into hexagons.

Exam Note: Count faces after truncation.

Question 8. Virial equation of state for one mole of real gas Z = 1 + B/V + C/V2 + D/V3 + ...... where B = IInd virial coefficient, C = IIIrd virial coefficient, D = IVth virial coefficient. Find out the value of B/Z at Boyle's temperature : (a) 0 (b) 1 (c) (b − a/RT) (d) a/bR

Solution. (a) At Boyle's temperature, PV = RT (B, C, ..... = 0), so B/Z = 0.

Teacher's Note: At Boyle temperature gas behaves ideally over a pressure range, so B vanishes.

Exam Note: State Z = 1 and B = 0 at TB.

Question 9. Which of the following statements is incorrect ? (a) All C–O bonds in CO32− are equal but not in H2CO3 (b) All C–O bonds in HCO2H are equal but not in HCO2− (c) C–O bond length in HCO3− is longer than C–O bond length in CO32− (d) C–O bond length in HCO3− and C–O bond length in CO32− are equal.

Solution. (b, c, d) Resonance in the formate ion: H–C(=O)–O− ↔ H–C(–O−)=O (canonical forms), so both C–O bonds in HCO2− are equal.

Teacher's Note: Resonance equalises C–O bonds in carbonate and formate, not in the acid.

Exam Note: Draw resonance forms of the anion.

Question 10. In I3− : (a) I2 is Lewis acid and I− is Lewis base (b) I2 is Lewis base and I− is Lewis acid (c) I3− itself behaves as amphoteric anion (d) I3− is linear

Solution. (a, d) I3− is linear (sp3d). I2 (Lewis acid) + I− (Lewis base) → I3−.

Teacher's Note: I⁻ donates a lone pair to I2; three lone pairs on central I sit equatorial, making it linear.

Exam Note: Mention sp3d and linear shape.

Question 11. Which of the following have non zero dipole moment ? (a) 1,4-dihydroxy benzene (b) 1,4-dichloro benzene (c) 1,4-dinitro benzene (d) 1,4-dimethoxy benzene

Solution. (a, d) Due to different orientation of the attached groups (bent –OH and –OCH3 groups, whose moments do not cancel).

Teacher's Note: Bent substituents can orient so that their dipoles do not cancel.

Exam Note: Consider group orientation, not only para position.

Question 12. Which of the following are correct ? (a) For a reaction involving only condensed phase ΔrH = ΔrU (b) Bond enthalpy and bond dissociation energy of a triatomic molecule are identical (c) Enthalpy of an ideal gas is a function of temperature only (d) There is no entropy change during allotropic change

Solution. (a, c) Entropy of CG and CD (graphite and diamond) are different. Average bond enthalpy and bond dissociation energy are different.

Teacher's Note: ΔH = ΔU + Δn_gRT, and Δn_g = 0 for condensed phases.

Exam Note: Quote ΔH = ΔU + ΔnRT.

Question 13. Select the correct reaction : (a) CH3·CH2·CH=CHCHO (Zn/Hg–HCl) → CH3CH2CH2·CH2CHO (b) CH3·CH2·CH=CHCHO (Zn/Hg–HCl) → CH3·CH2·CH2·CH2·CH3 (c) CH3COCH2·CO·CH3 (I2 + NaOH) → CHI3 + CH3COONa (d) C6H5CHO + HCHO (NaOH) → C6H5CH2OH + HCOONa

Solution. (d) This is the crossed Cannizzaro reaction. In Clemmensen reduction (Zn–Hg/HCl), only the >C=O group is reduced to –CH2–. (Book's note: pent-2,3-dione will not give iodoform reaction.) Note for human check: the statement as printed for (c) may differ slightly from the book's remark.

Teacher's Note: Benzaldehyde has no α-H, so formaldehyde is oxidised while benzaldehyde is reduced.

Exam Note: Name the crossed Cannizzaro reaction.

Question 14. Comprehension-1: The sums of first and second ionization energies and those of third and fourth ionization energies (in kJ mol−1, values given ×103) of nickel and platinum are: (IE)1 + (IE)2: Ni 2.49, Pt 2.66; (IE)3 + (IE)4: Ni 8.80, Pt 6.70. Also both Ni and Pt have co-ordination number = 4. Which is most stable complex of Ni ? (a) [Ni(CN)4]2− (b) [Ni(CN)6]2− (c) [Ni(CN)3]− (d) [Ni(CO)6]

Solution. (a) Ni forms Ni2+ more readily than Pt2+ due to lower values of (IE1 + IE2); with coordination number 4, [Ni(CN)4]2− is the stable complex.

Teacher's Note: Ni(II) with CN 4 matches the data; Ni(IV) is too costly.

Exam Note: Pick Ni2+ with four ligands.

Question 15. Which is least stable complex of Pt ? (a) K2[PtCl6] (b) [Pt(en)3]Cl4 (c) K2[Pt(Cl4)] (d) K2[Pt(C2O4)3]

Solution. (c) Pt forms Pt4+ more readily than Ni4+ due to lower values of (IE1 + IE2 + IE3 + IE4). So the Pt(II) complex is the least stable.

Teacher's Note: Low total IE for Pt makes Pt(IV) stable, so Pt(II) complexes are comparatively unstable.

Exam Note: Compare IE sums 6.70 and 8.80.

Question 16. Comprehension-2: A molecular formula having H-atom may represent an equilibrium mixture of two compounds due to migration of mobile H-atom between two polyvalent groups (tautomerism), e.g. CH3–C(=O)–CH2·COOCH3 ⇌ CH3–C(OH)=CHCOOCH3. The solubility of methyl acetoacetate in dilute NaOH is due to the formation of : (a) Na·CH2·CO·CH2·COOCH2Na (b) CH3COCH2COOCH2Na (c) CH3–C(ONa)=CHCOOCH3 (d) CH3·CO·CH2·COONa

Solution. (c) The –OH group (of the enol form) is attacked by Na (forming the sodium enolate).

Teacher's Note: The acidic enol O–H reacts with base to give a water-soluble sodium enolate.

Exam Note: Say enol OH is acidic.

Question 17. Enolic form of acetyl acetone is stabilized by : (a) van der Waals' forces (b) Intermolecular H-bonding (c) Intramolecular H-bonding (d) dipole-dipole repulsion

Solution. (c) Intramolecular H-bonding: CH3–C(OH)=CH–C(=O)–CH3, with the enolic O–H···O=C forming a six-membered chelate ring.

Teacher's Note: A six-membered intramolecular H-bond ring stabilises the enol.

Exam Note: Mention chelate ring.

Question 18. In the reaction acetophenone (C6H5COCH3) with D+, the product formed is : (a) C6H5COCH2D (b) C6H5C(OD)=CH2 (c) C6H5COCD3 (d) C6H5C(OD)=CD2

Solution. (b) C6H5COCH3 ⇌ C6H5C(OH)=CH2; with D+ this gives C6H5C(OD)=CH2.

Teacher's Note: Acid catalysis exchanges the enol O–H with D, shown as the enol deuterated on oxygen.

Exam Note: Show keto–enol equilibrium.

Question 19. Number of acidic hydrogen atoms in pentan-2,4-diene type arrangement (pentane-2,4-dione) is .........

Solution. Two

Teacher's Note: The two H atoms of the CH2 between the two C=O groups are acidic.

Exam Note: Count H on carbon flanked by two C=O.

Question 20. Number of atoms in upper layer of hexagonal close pack type arrangement is .........

Solution. Three

Teacher's Note: The upper layer of an hcp unit cell contains 3 atoms (in the triangular holes).

Exam Note: Recall the ABAB layered unit cell.

Question 21. On monochlorination of 2-methylbutane, the total number of chiral carbon atoms formed in the product molecule is .........

Solution. Two (one chiral carbon each in 1-chloro-2-methylbutane and 2-chloro-3-methylbutane, none in the other two products).

Teacher's Note: Chiral carbon needs four different groups; only two of four products have one.

Exam Note: Draw all four monochloro products.

Question 22. The uncertainty in location of an electron in an orbit is equal to its de Broglie wavelength. The minimum per cent error in its velocity measurement would be .........

Solution. Eight. With Δx = λ = h/mv and Δx·mΔv ≥ h/4π, Δv/v ≥ 1/4π ≈ 0.0796, i.e. about 8%.

Teacher's Note: Heisenberg with Δx = λ gives relative velocity error 1/4π.

Exam Note: Compute 1/(4π) × 100 ≈ 8%.

Question 23. A gas is present in a piston fitted vessel at 3 atm. How much pressure should be increased so that its volume is reduced to 25% of initial volume .........

Solution. Nine. P2 = 3/0.25 = 12 atm (Boyle's law), so the increase = 12 − 3 = 9 atm.

Teacher's Note: Boyle's law: P·V constant; ask for increase, not final pressure.

Exam Note: Subtract initial pressure: 12 − 3.

Question 24. Molarity of 10% mass/volume CaCO3 solution is .........

Solution. One. 10 g per 100 mL = 100 g/L; 100/100 g mol−1 = 1 M.

Teacher's Note: Convert w/v % to g per litre then divide by molar mass 100.

Exam Note: Multiply by 10 first.

Question 25. A mixture having 100 mL of 0.5 M HCl and 12.5 mL of 0.2 M H2SO4 requires 50 mL of baryta water solution. What is molarity of baryta water solution ?

Solution. The book prints 'One'. Corrected: milli-equivalents of acid = 100 × 0.5 + 12.5 × 0.2 × 2 = 50 + 5 = 55; Ba(OH)2 is 55/50 = 1.1 N, i.e. 0.55 M. (The printed answer One would fit if the H2SO4 volume were 125 mL.)

Teacher's Note: Equate meq of acids and base; Ba(OH)2 has n-factor 2.

Exam Note: Convert normality to molarity by dividing by 2.

Question 26. How many kinds of non-equivalent H-atoms are there in p-diethylbenzene (CH3CH2–C6H4–CH2CH3) ?

Solution. Three (1° CH3, 2° sp3 CH2 and 2° sp2 aromatic H).

Teacher's Note: Symmetry makes both ethyl groups and all four ring H equivalent.

Exam Note: Use symmetry to group H atoms.

Solution of Model Paper 3-A (Section A to F)

Question 1. Which of the following statement is correct ? (a) The dipole moment of CH3F is greater than CH3Cl (b) Photobromination of 2-methyl propane gives a mixture of 1-bromo-2-methyl propane and 2-bromo-2-methyl propane in the ratio 9 : 1 (c) Acetate ion is stronger base than methoxide ion (d) Sulphanilic acid is dipolar in nature

Solution. (d) Sulphanilic acid is H2N–C6H4–SO3H and possesses a zwitter-ion structure, H3N+–C6H4–SO3−.

Teacher's Note: Acidic –SO3H protonates the basic –NH2 internally, giving an inner salt.

Exam Note: Draw the zwitterion.

Question 2. Which of the following is incorrect ? (a) Molar mass of NaCl determined experimentally is 58.5 (b) SF4 possess the bond angles 90°, 102° and 173° (c) Band gap in germanium is small (d) CuI2 is less stable compound in aqueous medium

Solution. (a) The book writes: experimental molar mass of electrolytes > calculated molar mass. Corrected: for an electrolyte the experimentally determined molar mass is smaller than the calculated one (van't Hoff factor i > 1); either way, (a) is the incorrect statement.

Teacher's Note: Dissociation increases the number of particles, so apparent molar mass falls below 58.5.

Exam Note: Link i > 1 to lower observed molar mass.

Question 3. Select the incorrect statement : (a) Carbon nanotube has 20 hexagons and 5 pentagon. (b) Molar mass of Buckminster fullerene isotope of carbon is 720. (c) Liquid O2 is pink in colour. (d) H3PO2 is stronger acid than H3PO4.

Solution. (c) Liquid O2 is blue in colour.

Teacher's Note: Liquid oxygen is pale blue because O2 absorbs red light.

Exam Note: Quote colour: pale blue.

Question 4. The volume in dm3 of given mass of an ideal gas at 760 mm of Hg pressure and 298 K divided by 24.47 dm3 gives : (a) Avogadro no. (b) mole of gas (c) mass of gas (d) pressure of gas

Solution. (b) At 1 atm and 298 K the volume of 1 mole of gas is 24.47 dm3, so number of moles × 24.47 dm3 = volume of n moles. Check: V = RT/P = 0.0821 × 298 = 24.47 L.

Teacher's Note: Molar volume at 298 K and 1 atm is 24.47 dm3.

Exam Note: Compute V = RT/P = 24.47.

Question 5. The specific volume of water is 1.003 cm3 g−1. The density of water in g/cm3 is : (a) 1.003 (b) 18 × 1.003 (c) 1.003/18 (d) 0.9970

Solution. (d) density = 1/specific volume = 1/1.003 = 0.9970.

Teacher's Note: Density is the reciprocal of specific volume.

Exam Note: Take the reciprocal: 1/1.003 = 0.9970.

Question 6. Number of P–O, P=O and P–P bonds in P4O10 are respectively : (a) 12, 4, 0 (b) 12, 4, 3 (c) 6, 6, 3 (d) 6, 6, 0

Solution. (a) The P4O10 cage has 12 P–O bonds (6 bridging O atoms, 2 bonds each), 4 P=O bonds and no P–P bonds.

Teacher's Note: Six bridging oxygens give 12 P–O single bonds; four terminal O give P=O.

Exam Note: Draw the cage structure.

Question 7. uAV, urms and uMP are respectively average, root mean square and most probable speed of the molecule of an ideal monoatomic gas at absolute temperature T. The molecular mass of gas is M, then : (a) no molecule can have a speed greater than urms (b) no molecule can have a speed greater than uMP (c) no molecule can have a speed greater than uAV (d) average kinetic energy of a molecule is 3M/(4N) × (uMP)2

Solution. (d) Average K.E. = (3/2)(RT/N) = 3 × 2RTM/(4N·M) = 3M(uMP)2/(4N), using uMP2 = 2RT/M.

Teacher's Note: Molecules have a full distribution of speeds, so a, b, c fail.

Exam Note: Substitute RT = M u_mp²/2.

Question 8. The nuclear fusion which is not correct : (a) 411H → 42He + 20+1e + 2 neutrino + energy (b) 126C + 11H → 137N + energy (c) 147N + 11H → 158O + energy (d) 135C + 11H → 146C + energy

Solution. (d) Carbon has atomic number 6 (so the carbon isotope must be 136C, not 5C).

Teacher's Note: Check atomic and mass numbers balance on both sides.

Exam Note: Verify atomic number of carbon is 6.

Question 9. Rate constants for a parallel path first order reaction are given as : A → (K = 0.693 t−1), (K = 1.386 t−1), (K = 2.772 t−1). The average half life of A is : (a) 0.693 t (b) 0.406 t (c) 0.306 t (d) 0.206 t

Solution. (d) K = 0.693 + 1.386 + 2.772 = 4.851, so T = 1/K = 0.206 t. (This is the average life 1/K; the half-life 0.693/K would be 0.143 t, which is not among the options.)

Teacher's Note: For parallel paths rate constants add; the net K is their sum.

Exam Note: Add constants first, then take 1/K.

Question 10. Disproportionation of Cu+ ion into Cu2+ ion and Cu in aqueous solution can be prevented by the addition of : (a) Cu + HCl (b) thiourea (c) NaCl (d) benzene

Solution. (a, b) Due to complex formation, e.g. [CuCl2]− and [Cu(SC(NH2)2)3]+.

Teacher's Note: Ligands that bind Cu+ strongly stabilise it against disproportionation.

Exam Note: Name a stabilising complex of Cu(I).

Question 11. Pick up the correct statements : (a) The magnitude of the potential energy of the electron in any orbit is greater than its kinetic energy. (b) Even when the metal surface is faintly illuminated with suitable frequency of radiations, the photo electrons leave the surface immediately. (c) The time required for revolution of an electron in 4th Bohr's orbit is 8 times of the time required for revolution in 2nd Bohr's orbit. (d) Transition of electron from 4d orbital to 2s orbital is not possible.

Solution. (a, b, c, d) For the transition Δl = ±1 is required (4d to 2s has Δl = 2). Also |PE| = 2 KE, and the time period T ∝ n3, so (4/2)3 = 8.

Teacher's Note: |PE| = 2×KE in Bohr orbits; T ∝ n³; selection rule Δl = ±1.

Exam Note: Apply Δl = ±1 selection rule.

Question 12. Which of the following reaction produces conjugated dienes ? (a) 3-bromocyclohexene-type bromide + alc. KOH (b) CH3CH(Br)·CH=CH2 + alc. KOH (c) Br·CH2·CH=CH2 + alc. KOH (d) Br·CH2·CH2·CH=CH2 + alc. KOH

Solution. (a, b, d) In (c) the cumulative diene CH2=C=CH2 is formed.

Teacher's Note: Elimination that places the new double bond next to the existing one gives a conjugated diene.

Exam Note: Locate double-bond positions.

Question 13. Which statement is correct about the following reaction ? 14CH2=CH–CH3 + Cl2 (low conc. of Cl2, heat) → P + Q (a) P and Q are 14CH2=CH–CH2Cl and CH2–14CH=CH2 (with Cl on the other terminal carbon) (b) The reaction obeys free radical allylic substitution. (c) P and Q formed are in 1 : 1 ratio. (d) Rearrangement of free radical takes place.

Solution. (a, b, c, d) The allylic radical 14CH2=CH–CH2• ↔ •14CH2–CH=CH2 reacts with Cl2 to give 14CH2=CH–CH2Cl and 14CH2Cl–CH=CH2. Thus a 1 : 1 mixture of the two is obtained.

Teacher's Note: Resonance of the allyl radical places labelled C at either terminus equally.

Exam Note: Mention resonance-delocalised allyl radical.

Question 14. Which are the correct products of the reaction ? A chiral alkyne/alkene bearing C2H5, CH3, H and an unsaturated side-chain (CH=CH2 / C≡CH) reacts with D2/Pd to give H + I; options (a) to (d) are Fischer projections of deuterated products.

Solution. (c, d) This is addition of D2 on C≡C (syn addition on Pd). (The Fischer projections are not redrawn.)

Teacher's Note: Catalytic D2 adds syn across the multiple bond while the stereocentre is retained.

Exam Note: Note syn addition and retained configuration.

Question 15. S: Cl3C·CH=CH2 + HCl → Cl3C·CHClCH3. E: Cl3C·CH2CH2+ (1°) is more stable than Cl3C·CH+CH3 (2°). (a) S is correct but E is wrong. (b) S is wrong but E is correct. (c) Both S and E are correct and E is correct explanation of S. (d) Both S and E are correct but E is not correct explanation of S.

Solution. (b) The stability of the 1° carbocation is more due to the –I effect of 3Cl on the 2° carbocation, and thus the product formed is Cl3C·CH2·CH2Cl (anti-Markovnikov), so S is wrong.

Teacher's Note: –CCl3 destabilises the nearby cation more, so the cation farther from it is preferred.

Exam Note: Apply inductive effect to carbocation stability.

Question 16. S: Conversion of CH≡CH → CH3CHO is a redox change. E: Hydration is never redox reaction. (Options as in the previous question.)

Solution. (b) S is wrong: the average oxidation number of carbon in CH≡CH and CH3CHO is −1. Also hydration is never a redox reaction.

Teacher's Note: Check oxidation numbers: both compounds have average C oxidation state −1.

Exam Note: Compute average oxidation number of C.

Question 17. S: All the detergents are surfactants but all the surfactants are not detergents. E: Detergents possess surface activity as well as cleansing action. (Options as in Q15.)

Solution. (c) Surfactants possess surface activity only whereas detergents possess surface activity and detergency, i.e. cleansing action.

Teacher's Note: Detergents are a subset of surfactants that also clean.

Exam Note: Define detergency versus surface activity.

Question 18. More than one match is possible : List A: A. 2KClO3(s) → (MnO2(s)) 2KCl + 3O2(g); B. 2H2O2(l) → (Hg(l)) 2H2O(g) + O2(g); C. 2H2O2(l) → (Pt) 2H2O + O2(g); D. 2SO2(g) + O2(g) → (NO(g)) 2SO3(g). List B: 1. Homogeneous catalysis 2. Heterogeneous catalysis 3. Δnreaction ≥ 1 4. Δnreaction ≤ 1

Solution. A—2, 3; B—2, 3; C—2, 3; D—1, 4

Teacher's Note: Catalyst in a different phase from reactants is heterogeneous; Δn is change in gaseous moles.

Exam Note: Compare phases of catalyst and reactants.

Question 19. More than one match is possible : List A: A. Work, B. Heat, C. Temperature, D. q + w. List B: 1. Boundary phenomenon 2. Path function 3. Intensive property 4. Extensive property

Solution. A—1, 2, 4; B—1, 2, 4; C—3; D—4

Teacher's Note:Work and heat appear only at the boundary and depend on path; q + w = ΔU is a state.

Exam Note: Classify as path or state function.

Question 20. Degree of unsaturation (index of hydrogen deficiency) is the number of pairs of H's a molecular formula lacks to be an alkane (CnH2n+2). Presence of ring and multiple bonds always brings in the index of hydrogen deficiency. Which of the following possess degree of unsaturation as reported ? (a) cyclobutane; 1° (b) methylcyclopropane; 3° (c) vinylcyclopropane; 3° (d) a polycyclic C6 ring system; 4°

Solution. (d) As printed in the book: each option's formula and degree of unsaturation is listed (e.g. C4H8 and C5H8 for the small-ring options, C6H8 for (d)). Note for human check: options were drawn as structures in the book and are not reproduced exactly here.

Teacher's Note: Each ring or double bond counts one degree; a triple bond counts two.

Exam Note: Count rings plus π bonds.

Question 21. C4H5N has degree of unsaturation equal to : (a) 1° (b) 2° (c) 3° (d) 4°

Solution. (c) Disregard N but remove one H for each N: C4H4 gives (2×4 + 2 − 4)/2 = 3.

Teacher's Note: Nitrogen adds one H to the apparent formula; remove it before counting.

Exam Note: Subtract one H per N.

Question 22. A hydrocarbon (A) has 2° unsaturation. It is treated with 1 mole of H2 catalytic hydrogenation. Experiment shows that there is no reaction. The hydrocarbon has : (a) two double bond (b) one triple bond (c) one ring (d) two rings

Solution. (d) Two rings has 2° unsaturation and does not react with H2.

Teacher's Note: Rings of ordinary size resist catalytic hydrogenation; π bonds do not.

Exam Note: Distinguish ring from π unsaturation.

Question 23. The number of cells which can be produced involving the redox change : Fe + 2Fe3+ → 3Fe2+ are :

Solution. Three. Electrode: Pt|Fe2+|Fe3+: Fe3+ + e → Fe2+ (and the reverse, Fe2+ → Fe3+ + e); Electrode: Fe|Fe2+: Fe → Fe2+ + 2e; Electrode: Fe|Fe3+: Fe → Fe3+ + 3e. Use any two at one time and get three cells with the same redox change.

Teacher's Note: Three half-cell couples give three pairs, all producing the same net change.

Exam Note: Combine couples two at a time.

Question 24. Number of mole of As2S3 required to reduce 56 mole of HNO3 according to the reaction : As2S3 + HNO3 → H3AsO4 + H2SO4 + NO

Solution. Six. (As3+)2 → 2As5+ + 4e; (S2−)3 → 3S6+ + 24e; total 28e per As2S3; 3e + N5+ → N2+ (× 28). Balanced: 3As2S3 + 28HNO3 → 6H3AsO4 + 9H2SO4 + 28NO, so 28 HNO3 ≡ 3As2S3 and 56 mol HNO3 ≡ 6 mol As2S3.

Teacher's Note: Both As and S are oxidised: 28 electrons lost per formula unit.

Exam Note: Balance electrons: 28 lost vs 3 gained.

Question 25. The 'n' factor of O3 in the redox change, 2O3 → 3O2 is :

Solution. Six. 2 mol O3 = 3 mol O2 = 4 × 3 eq. O2 = 12 eq. O3; so 1 mol O3 = 6 eq. O3. (As printed in the book; flagged for human check.)

Teacher's Note: n-factor is equivalents per mole, found here via the book's equivalent comparison.

Exam Note: State equivalents per mole.

Question 26. The vapour pressure of a mixture of two volatile liquids is given by Pm = 4.0XA + 3.0. The vapour pressure of pure B is :

Solution. Three. PM = 4.0XA + 3.0; if XA = 0, PM = PB° = 3.0.

Teacher's Note: Pure B corresponds to X_A = 0.

Exam Note: Substitute X_A = 0.

Question 27. The resistance of mercury becomes almost zero at ...... K.

Solution. Four. It is a fact (superconductivity of mercury at about 4.2 K).

Teacher's Note: Kamerlingh Onnes discovered superconductivity in Hg near 4 K.

Exam Note: Quote 4.2 K.

Question 28. The relative strength of two weak acids HA (Ka = 8 × 10−5) and HB (Ka = 2 × 10−5) is :

Solution. Two. Relative strength of two weak acids = √(Ka1·C1)/√(Ka2·C2); if C1 = C2, R.S. = √(Ka1/Ka2) = √(8×10−5/2×10−5) = √4 = 2.

Teacher's Note: Weak acid strength scales as √(Ka·C) at equal concentration.

Exam Note: Take square root of Ka ratio.

Solution of Model Paper 3-B (Section A to D)

Question 1. Which of the following is incorrect ? (a) Enthalpy is an extensive property (b) Zeroth law suggest for thermal equilibrium (c) First law of thermodynamics fails to explain systems away from equilibrium (d) First law of thermodynamics predicts the feasibility of change and rate of reaction.

Solution. (d) The first law of thermodynamics does not suggest anything about the rate of a reaction.

Teacher's Note: First law is only an energy-accounting law; spontaneity needs the second law, rate needs kinetics.

Exam Note: Say first law gives neither feasibility nor rate.

Question 2. The no. of neutrons (n) and no. of protons (p) in a nucleus can be depicted as : (a) n is always greater than p (b) n is always equal to p (c) n ≷ p or n = p (d) The ratio of n and p is always 1.5

Solution. (c) n/p = 1 for 21H and n/p = 2 (maximum) for 31H, while 11H has n = 0. So n may be greater than, equal to or less than p.

Teacher's Note: Light nuclei have n = p, heavy nuclei n > p, and ¹H has n < p.

Exam Note: Cite ¹H (n < p) and heavy nuclei (n > p).

Question 3. At very high pressure helium (He) crystallises as : (a) bcc (b) ccp (c) fcc (d) can not be crystallised

Solution. (c) It is a fact. (As printed; the scan reads option (b) as 'ccp', which may be 'hcp'; flagged for human check.)

Teacher's Note: Answer is a recalled fact about solid helium's close-packed structure.

Exam Note: Recall helium crystallises only under pressure.

Question 4. Analysis shows that a non stoichiometric compound exists as Ni0.98O1.0. The ratio of fraction Ni2+ and Ni3+ present in Ni0.98O1.0 is : (a) 98.04 (b) 23.51 (c) 49.02 (d) 24.01

Solution. (b) Oxidation number of Ni in Ni0.98O1.0 = 200/98. Let % of Ni2+ and Ni3+ be a and b: a + b = 100; 2a + 3(100 − a) = (200/98) × 100 = 204.08, giving a = 95.92, b = 4.08; a/b = 23.51. Verified.

Teacher's Note: Charge balance with O²⁻ fixes the average Ni oxidation state at 2.0408.

Exam Note: Set average oxidation state = 2/0.98.

Question 5. The temperature of a bomb calorimeter was found to rise by 1.617 K, when a current of 3.2 ampere was passed for 27.0 second from a source of 12.0 volt. Assuming heat is taken only by bomb calorimeter, the calorimeter constant is : (a) 19.155 JK−1 (b) 191.5 JK−1 (c) 641.18 JK−1 (d) 1.915 JK−1

Solution. (c) Energy given = 3.2 × 27 × 12.0 = 1036.8 J. Heat taken by calorimeter = mS × 1.617, so mS of calorimeter = 1036.8/1.617 = 641.18 J K−1. Verified.

Teacher's Note: Electrical energy = V·I·t; divide by temperature rise.

Exam Note: Compute VIt/ΔT.

Question 6. Which of the following metal does not give the following reaction ? M (dissolved in NH3) → M2+ + 2[e(NH3)x]− : (a) Be (b) Mg (c) Ca (d) Ba

Solution. (a) Be does not show this property.

Teacher's Note: Only the heavier alkaline-earth metals dissolve in liquid ammonia to give blue solutions.

Exam Note: Be is small and covalent so it does not dissolve.

Question 7. The product formed during action of cyclohexanone with propenyl ion followed by hydrolysis is : (a) cyclohexyl–C≡C–OH (b) a ring carbon bearing –C≡C–CH3 with the OH shown on a different ring position (c) the ring carbon bearing both –C≡C–CH3 and –OH (d) cyclohexyl–C≡C–CH2OH

Solution. (c) The carbanion CH3–C≡C:− adds to the C=O of cyclohexanone, giving the alkoxide, which on hydrolysis (H2O) gives 1-(prop-1-ynyl)cyclohexan-1-ol, i.e. cyclohexane ring bearing both –C≡C–CH3 and –OH on the same carbon.

Teacher's Note: Alkynide ion is a carbon nucleophile attacking the carbonyl carbon.

Exam Note: Show nucleophilic addition then protonation.

Question 8. Glyoxal on reaction with dil. NaOH gives : (a) COONa/COONa (b) CH2OH/CH2OH (c) COONa/CH2OH (d) a mixture of COONa/COONa and CH2OH/CH2OH

Solution. (c) This is an intramolecular Cannizzaro reaction, giving sodium glycollate (HOCH2COONa).

Teacher's Note: Both CHO groups lack α-H; one is oxidised and the other reduced within the same molecule.

Exam Note: Name the intramolecular Cannizzaro reaction.

Question 9. Select the incorrect statement : (a) Central C–C bond in buta-1,3-diene is shorter than n-butane. (b) CH2=CH− is more basic than −C≡CH. (c) Diphenyl bromoethane on reaction with KNH2 gives diphenyl ethane. (d) Vinyl chloride on reaction with dimethyl copper gives an alkene.

Solution. (c) The correct reaction is (C6H5)2C=CHBr + KNH2 → C6H5–C≡C–C6H5 (diphenylacetylene, by loss of HBr), not diphenylethane.

Teacher's Note: Strong base eliminates HBr from the bromoalkene giving an alkyne.

Exam Note: Show dehydrohalogenation to alkyne.

Question 10. Select the correct statements : (a) Dipole moment of NH3 is greater than dipole moment of NF3. (b) Solvents with high dielectric constants tend to be more polar. (c) Wave functions are used to calculate the quantised energy of orbit. (d) In MO theory conservation of orbitals takes place.

Solution. (a, b, d) μNH3 = 1.46 D; μNF3 = 0.24 D. Number of orbitals mixed = number of MO formed; wave functions are used to calculate the quantised energy of an electron in an orbital (not of an orbit, so (c) is wrong).

Teacher's Note: In NF3 the N–F bond dipoles oppose the lone-pair moment.

Exam Note: Quote 1.46 D versus 0.24 D.

Question 11. Contributing canonical forms of diazomethane CH2N2, towards its resonance structure are : (a) H2C=N+=N− (with lone pairs on terminal N) (b) H2C−–N+≡N (c) H2C−–N≡N+-type structure with wrong charge placement (d) H2C+–N=N−-type structure

Solution. (a, b) The rest are unstable forms and do not contribute significantly.

Teacher's Note: Contributing forms have full octets and charges on suitable atoms.

Exam Note: Check octets and charge placement.

Question 12. Select the correct statements : (a) Ea is small and ΔHr is negative, reaction is fast and exothermic. (b) Ea is large and ΔHr is negative, reaction is slow and exothermic. (c) Catalyst can increase rate by increasing entropy of activation. (d) For an exothermic reaction ΔH < Ea.

Solution. (a, b, d) For an exothermic reaction ΔH < Ea (ΔH is negative while Ea is positive). (c) is wrong since a catalyst works mainly by lowering Ea.

Teacher's Note: Rate depends on Ea; thermodynamic sign depends on ΔH.

Exam Note: Separate kinetics from thermodynamics.

Question 13. Indicators are the substances used to detect the end point or completion point of a reaction. Acid-base indicators are themselves weak acid or weak base. Phenolphthalein is not a good indicator for weak acid titrations, whereas methyl orange is not a good indicator for weak alkali titrations. Methyl orange on dissociation gives : (a) coloured cation (b) coloured anion (c) both coloured ions (d) both colourless ions

Solution. (a) MeOH ⇌ Me+ + OH− (methyl orange behaves as a weak base indicator and its cation is coloured).

Teacher's Note: Methyl orange is a weak base indicator; the ionised cation shows the colour.

Exam Note: Write MeOH ⇌ Me+ + OH-.

Question 14. Select the incorrect statement about quantitative estimation by volumetric analysis : (a) Equivalence point is theoretical value. (b) End point is experimental value. (c) Both these point are exactly same. (d) Both these points are almost same.

Solution. (c) Equivalence point = experimental value of end point (only approximately), they are not exactly the same.

Teacher's Note: End point is observed by indicator change and differs slightly from the true equivalence point.

Exam Note: Define both points.

Question 15. For which titration phenolphthalein can not be used : (a) CH3COOH + NaOH (b) H2C2O4 + KOH (c) HCl + NH4OH

Solution. (c) Phenolphthalein is not a good indicator for weak base (acid) titration with a strong acid; its range (pH 8.3–10) lies above the equivalence pH of HCl vs NH4OH.

Teacher's Note: Strong acid and weak base end near pH 5, so methyl orange suits.

Exam Note: Match indicator range to equivalence pH.

Question 16. For which titration methyl orange can not be used ? (a) HCl vs NH4OH (b) HCl vs NaOH (c) FeSO4 vs KMnO4 (d) H2SO4 vs KOH

Solution. (c) Methyl orange is an acid-base indicator. This is a redox change.

Teacher's Note: KMnO4 is self-indicating; acid-base indicators do not respond to redox endpoints.

Exam Note: State redox titration needs different indicator.

Question 17. Select the correct statement : (a) Phenolphthalein is more dissociated in NH4OH than in NaOH. (b) The degree of dissociation of phenolphthalein is more in HCl than in KOH. (c) Phenolphthalein gives coloured cation on dissociation. (d) The degree of dissociation of phenolphthalein is more in strong base than in weak base.

Solution. (d) Phenolphthalein is a weak acid and thus dissociates more in base: HPh ⇌ H+ + Ph−.

Teacher's Note: Added OH⁻ removes H⁺ and shifts the equilibrium right; a stronger base shifts it further.

Exam Note: Use Le Chatelier on HPh ⇌ H+ + Ph-.

Question 18. Number of possible isomers of the complex ion [Cr(NH3)(OH)2Cl3]2− are ...

Solution. Three. (The three geometrical isomers are drawn in the book: all-cis; Cl, OH trans; and Cl, trans OH cis.) Verified by counting octahedral arrangements of ligands a, b2, c3: 3 distinct stereoisomers.

Teacher's Note: Count distinct octahedral arrangements of 1 NH3, 2 OH, 3 Cl.

Exam Note: Enumerate cis/trans placements.

Question 19. Number of phases of a substance (e.g., SR, SM, S1, SV) can exist together in equilibrium for one component system.

Solution. Three. F + P = C + 2; F = 0 (minimum); C = 1, so P = 3.

Teacher's Note: Gibbs phase rule gives the maximum phases at the triple point.

Exam Note: Apply F + P = C + 2 with F = 0.

Question 20. Disproportionation of P4 in alkaline medium produces how much mole of HPO32− ?

Solution. Two. P4 + 4OH− + 2H2O → 2PH3 + 2HPO32− (balanced for atoms and charge).

Teacher's Note: P4 is both oxidised (to phosphite) and reduced (to phosphine).

Exam Note: Write the balanced equation.

Question 21. 'n' factor for Fe2O3 in its reaction with HCl (aq.) to produce FeCl3 and H2O is ...

Solution. Six. Fe2O3 + 6HCl → 2FeCl3 + 3H2O; E = M/6 [Fe2O3 is a base].

Teacher's Note: For acid-base reactions n-factor = number of H⁺ neutralised per formula unit.

Exam Note: Count H+ consumed per Fe2O3.

Question 22. Number of nearest neighbours NH3 molecules to each molecule of NH3 in solid ammonia.

Solution. Six. It is a fact.

Teacher's Note: Solid ammonia has a close-packed-like arrangement with hydrogen-bonded neighbours.

Exam Note: Recall the structure fact.

Question 23. At what pH a 1.0 × 10−3 M solution of a basic indicator (Kind = 1.0 × 10−10) change colour ?

Solution. Four. Kb = [B+][OH−]/[BOH]; at 50% change [B+] = [BOH], so [OH−] = 1 × 10−10, pOH = 10 and pH = 4.

Teacher's Note: Colour changes when the two forms are equal, so [OH⁻] = K.

Exam Note: Set [B+] = [BOH].

Question 24. The following electrodes are coupled to form a cell. The standard E° for the given cell is ... A3+ + 3e → A; E° = 1.50 V; B2+ + 2e → B; E° = −2.50 V

Solution. Four. 3B + 2A3+ → 3B2+ + 2A; E° = 2.50 + 1.50 = 4.0 volt.

Teacher's Note: Cell E° = E°cathode − E°anode, independent of stoichiometric coefficients.

Exam Note: Do not multiply E° by coefficients.

Question 25. Ionization constants for acids HA and BH+ are 10−7 and 10−3 respectively. The pKeq for the reaction HA + B ⇌ BH+ + A− is ...

Solution. Four. Ka,HA = [H+][A−]/[HA] = 10−7 (1); Ka,BH+ = [B][H+]/[BH+] = 10−3; Ka,HA/Ka,BH+ = [A−][BH+]/([HA][B]) = Keq = 10−7/10−3 = 10−4, so pKeq = 4.

Teacher's Note: K_eq is the ratio of the two Ka values.

Exam Note: Divide the Ka values.

Question 26. Specific rotation of a pure enantiomer is +10°. If the isomer is isolated from a reaction showing 80% retention and 20% racemisation, the observed rotation will be plus ...

Solution. Eight. 0.8 × (+10°) = +8°.

Teacher's Note: Racemised fraction contributes zero net rotation.

Exam Note: Multiply retained fraction by 10°.

Question 27. How many kinds of H's are there in CH3–CH=CH2 ?

Solution. Four. (Ha in CH3; Hb, Hc, Hd on the double bond.) The H atoms on the right of the double bond are not equivalent, since one is cis to CH3 and the other is trans. Replacement of Hc by X gives the cis-diastereomer; replacement of Hd gives the trans-diastereomer.

Teacher's Note: Replacing each terminal =CH2 hydrogen gives different diastereomers, so they differ.

Exam Note: Use the replacement test.

Solution of Model Paper 4-A (Section A to D)

Question 1. Which of the following does not show Lewis acid-base reaction ? (a) BrF3 + F− (b) AlCl3 + BF3 (c) I2 + I− (d) KH + H2O

Solution. (b) Both are Lewis acids.

Teacher's Note: A Lewis acid-base reaction needs one electron-pair donor and one acceptor.

Exam Note: Identify donor and acceptor.

Question 2. Which of the following is finger print of an atom ? (a) Molecular spectrum (b) X-ray spectrum (c) IR spectrum (d) Line spectrum

Solution. (d) Each atom shows a characteristic line spectrum.

Teacher's Note: Atomic emission lines are unique to each element.

Exam Note: Say line spectrum is characteristic of an element.

Question 3. Ziegler-Natta catalyst used in polymerisation of ethylene is : (a) TiCl4(C2H5)3B (b) TiCl4(C2H5)3Na (c) TiCl4(C2H5)3Zn (d) TiCl4(C2H5)3Al

Solution. (d) It is a fact (TiCl4 with triethylaluminium, Al(C2H5)3).

Teacher's Note: The catalyst is TiCl4 plus an aluminium alkyl.

Exam Note: Name TiCl4 + Al(C2H5)3.

Question 4. If X is the mole fraction of solute when dissolved in water. The molality of a solution can be given by : (a) 500X/(9(1 − X)) (b) 500(1 − X)/(9X) (c) 1000(1 − X)/(9X) (d) 1000X/(9(1 − X))

Solution. (a) n/(n + N) = X and N/(n + N) = 1 − X, so n/N = X/(1 − X). Molality = (n × 1000)/(N × 18) = (X/(1 − X)) × (1000/18) = 500X/(9(1 − X)).

Teacher's Note: Moles of solute per 1000 g water, with N moles water = 18N g.

Exam Note: Take n/N = X/(1−X), then ×1000/18.

Question 5. Which one is not correct about N2Cl4 ? (a) It is a non-planar molecule (b) Both the N atoms are sp3-hybridized (c) Both are pyramidal N atoms (d) One N is sp3 and the other is sp2 hybridized

Solution. (d) Others are facts about N2Cl4 (both N are sp3 and pyramidal).

Teacher's Note: Each N has three bonds and one lone pair, so both are the same type.

Exam Note: Count bond pairs + lone pairs for each N.

Question 6. Pure PCl5 is introduced into an evacuated chamber and attains the equilibrium at 250°C and 2 atm pressure. The equilibrium mixture contains 40% chlorine by volume. Kp of reaction at 250°C is : (a) 0.133 (b) 1.6 (c) 1.78 (d) 0.266

Solution. PCl5 ⇌ PCl3 + Cl2. Taking total = 100: PCl5 20, PCl3 40, Cl2 40 (volume % equals mole %). Kp = (nPCl3 × nCl2/nPCl5) × (P/Σn) = (40 × 40/20) × (2/100) = 16/10 = 1.6 atm. Corrected: the correct option is (b) 1.6 (the book's key letter reads (a), which does not match its own value 1.6).

Teacher's Note: Volume % equals mole %; use partial pressures P × mole fraction.

Exam Note: Write Kp with partial pressures: 1.6 atm.

Question 7. The pH of solution by mixing 50 mL of 0.6 M NH4OH and 50 mL of 0.1 M H2SO4 is : (Given Ka for NH4+ = 10−9) (a) 4.39 (b) 6.61 (c) 9.30 (d) 7.39

Solution. (c) 2NH4OH + H2SO4 ⇌ (NH4)2SO4 + 2H2O. Meq at t = 0: NH4OH 30, H2SO4 10; after reaction: NH4OH 20, H2SO4 0, (NH4)2SO4 10. [(NH4)2SO4] = 10/(2 × 100) M, so [NH4+] = (10 × 2)/(2 × 100) M = 0.1 M; [NH4OH] = 20/100 = 0.2 M. pOH = pKb + log([NH4+]/[NH4OH]) = 5 + log(0.1/0.2) = 5 − 0.3010 = 4.6989, so pH = 9.3010. Verified.

Teacher's Note: Excess weak base plus its salt forms a basic buffer; Kb = Kw/Ka = 10^-5.

Exam Note: Use Henderson equation for base buffer.

Question 8. Select the wrong statement about Cannizzaro reactions : (a) It is a disproportionation reaction. (b) Addition of OH− occurs in I step on the carbonyl gp. to form complex anion. (c) The complex anion formed acts as H− donor to other molecule of aldehyde reducing it to methoxide ion while the anion is itself oxidised to formic acid. (d) The resulting methoxide ion and formic acid act as Lewis base-Lewis acid to form methyl formate ion.

Solution. (d) The process of step (d) involves exchange of proton, i.e. a Brønsted acid-base reaction (formic acid transfers H+ to methoxide).

Teacher's Note: The last step is proton transfer, giving formate and methanol, not an ester.

Exam Note: Say final step is proton transfer.

Question 9. Phenols on treatment with diazomethane in presence of ether gives : (a) C6H5CN (b) C6H5NC (c) C6H5NH2 (d) C6H5OCH3

Solution. (d) C6H5OH + CH2N2 → C6H5OCH3 + N2 (methylation of phenol, giving anisole).

Teacher's Note: Acidic phenol protonates CH2N2, and the methyl diazonium loses N2 to methylate O.

Exam Note: Write equation with N2 release.

Question 10. Point out the correct reactions : (a) BrCCl3 + ROOR → ROBr + :CCl3 (b) BrCCl3 + ROOR → ROCl + :CBrCl2 (c) HCCl3 + ROOR → ROH + :CCl3 (d) HCCl3 + ROOR → ROCl + :CHCl2

Solution. (a, c) The ROOR dissociates to •OR + •OR; the radical abstracts Br (weaker C–Br bond) or H, leaving the •CCl3 radical.

Teacher's Note: Radicals abstract the weakest-bonded atom: Br from BrCCl3, H from CHCl3.

Exam Note: Mention peroxide homolysis first.

Question 11. The nature of H's in CH3·CH=CH·CH2·CH2·CH(CH3)2 can be correctly represented as : (a) it has two types of allylic and one type of vinylic H-atoms, along with 3°, 2° and 1° H-atoms (b) both the vinylic H-atoms are equivalent (c) the reactivity order of H's is allylic 2° > allylic 1° > 3° > 2° > 1° > vinylic (d) both the allylic H's are equivalent

Solution. (a, b, c) Labelling H's: a – allylic 1° (CH3), b – vinyl (both =CH), c – allylic 2°, d – 2°, e – 3°, f – 1°. The reactivity order is c > a > e > d > f > b.

Teacher's Note: Allylic H are most reactive; vinylic H least.

Exam Note: Rank allylic > 3° > 2° > 1° > vinylic.

Question 12. IUPAC name of [Ni(NH3)6]3[Co(NO2)6]2 is : (a) Hexaamine nickel (III) hexanitrocobaltate (II) (b) Hexaamine nickellete (III) hexanitrocobaltate (II) (c) Hexaamine nickel (II) hexanitrocobaltate (III) (d) Hexaamine nickellete (II) hexanitrocobaltate (III)

Solution. (c) It is a fact. Charge check: 3 × [Ni(NH3)6]2+ = +6 and 2 × [Co(NO2)6]3− = −6, so Ni is +2 and Co is +3.

Teacher's Note: Cation named first, anion with -ate; oxidation states from charge balance.

Exam Note: Balance charges to get Ni(II), Co(III).

Question 13. Select the correct statements : (a) K-electron capture always leads to γ-rays emission. (b) K-electron capture shows a decrease in atomic number. (c) K-electron capture shows an increase in mass number. (d) K-electron capture shows an increase in n/p ratio.

Solution. (b, d) 11p + 0−1e → 10n + X-rays, e.g. 13356Ba + 0−1e → 13355Cs + X-rays. Mass number remains same, atomic number decreases, n/p increases.

Teacher's Note: A K-shell electron combines with a proton to make a neutron.

Exam Note: Mass number unchanged, Z falls by one.

Question 14. S: Activation energy for nuclear fusion is very high. E: Nuclear fusion are made at high temperature to overcome electrostatic repulsion between nuclei. (a) S is correct but E is wrong. (b) S is wrong but E is correct. (c) Both S and E are correct and E is correct explanation of S. (d) Both S and E are correct but E is not correct explanation of S.

Solution. (c) Explanation is correct reason for statement.

Teacher's Note: Coulomb repulsion between positive nuclei is the barrier.

Exam Note: State repulsion causes high Ea.

Question 15. S: VIBGYOR is a continuous spectrum. E: In continuous spectrum each colour fades into next colour. (Options as in Q14.)

Solution. (c) Explanation is the correct reason for the statement.

Teacher's Note: Continuous spectrum has no gaps between colours.

Exam Note: Define continuous spectrum.

Question 16. S: Ionisation energy of Li(s) is higher than that of sodium. E: It is easier to oxidise Li(s) to Li+(aq) as compared to Na(s) to Na+(aq). (Options as in Q14.)

Solution. (d) Due to the higher hydration energy of Li+, E°RP of Li+/Li... thus the oxidation potential of Li is greater than that of Na. Both statements are correct, but E is not the explanation of S (the aqueous oxidation depends on hydration energy, not ionisation energy).

Teacher's Note: Gas-phase IE and aqueous electrode potential differ because of hydration energy.

Exam Note: Separate IE from E° (hydration energy).

Question 17. S: A nucleophile Nu: adds to C=C of –C=C–C=O but not to ordinary alkenes. E: Nu: adds to the α-carbon leaving a resonance stabilized carbanion enolate. (Options as in Q14.)

Solution. (a) Nu: adds to the β-carbon and not on α: Nu: + Cβ=Cα–C=O → Nu–Cβ–Cα=C–O− (resonance stabilised enolate). So S is correct but E is wrong.

Teacher's Note: Conjugate addition occurs at the β-carbon, leaving a stabilised enolate.

Exam Note: Say β-carbon, not α.

Question 18. The basicity of KxHy(PO4)z in the reaction KxHy(PO4)z + KOH → Kx+1Hy−1(PO4)z + H2O is :

Solution. One. Number of replaced H atom = 1.

Teacher's Note: Basicity here means H⁺ replaced in this reaction.

Exam Note: Count H replaced.

Question 19. The acidity of K2Hy(PO4)z is :

Solution. Two. Total charge on cation (other than H) = 2.

Teacher's Note: Acidity of a salt as base is the charge of the cation neutralised.

Exam Note: Add cation charge excluding H.

Question 20. The ratio of mole of H+ furnished to 90 g H2C2O4 and 126 g H2C2O4·2H2O is :

Solution. One. Both give 2 mol H+ (90 g = 1 mol H2C2O4, M = 90; 126 g = 1 mol dihydrate, M = 126), so the ratio is 1.

Teacher's Note: Water of crystallisation adds no acidic hydrogen.

Exam Note: Convert mass to moles first.

Question 21. A bottle is labelled 122.5% oleum. 22.7 mL of Ca(OH)2 of unknown molarity are used to completely neutralise 1 g oleum. The normality of Ca(OH)2 is :

Solution. Two. (100 + 22.5)% oleum means 222.5 g H2SO4 (per 100 g oleum): H2O + SO3 → H2SO4; 18 g H2O gives 98 g H2SO4, so 22.5 g H2O gives 98 × 22.5/18 = 122.5 g H2SO4 in 100 g oleum. Total H2SO4 = 100 + 122.5 = 222.5 g. 1 g oleum = 2.225 g H2SO4 = (2.225/49) × 1000 = 45.41 meq. So 22.7 × N = 45.41, giving N = 2. Verified.

Teacher's Note: Label % means total H2SO4 obtainable per 100 g after adding water to the SO3.

Exam Note: Convert to meq of H2SO4 with E = 49.

Question 22. No. of electrons in the redox change : NO3− + H+ + ne → NO + H2O

Solution. Three. NO3− + 4H+ + 3e → NO + 2H2O.

Teacher's Note: Nitrogen goes from +5 to +2, gaining three electrons.

Exam Note: Balance by oxidation numbers.

Question 23. Most probable speed of butane at 348 K is same as root mean square speed of H2 at T K. The value of T is :

Solution. Eight. 2R × 348/58 = 3RT/2, so T = 4 × 348/(58 × 3) = 8 K. Verified.

Teacher's Note: Equate √(2RT/M) for butane (M = 58) with √(3RT/M) for H2 (M = 2).

Exam Note: Use u_mp and u_rms formulae.

Question 24. 8 g of CH4 diffuses through a pin hole in 2 sec. At the same temperature and pressure mass of He diffuses through same pin hole in 4 sec is :

Solution. Eight. Rate ∝ moles per time: CH4 = (8/16)/2 = 0.25 mol s−1; He = (w/4)/4; ratio = √(4/16) = 1/2, so (w/4)/4 = 0.125 and w = 8 g. Verified (the book writes (8/2)/(w/4) = √(16/4) = 2, w = 8 g).

Teacher's Note: Graham's law: rate ∝ 1/√M, with rate in volume (mole) per time.

Exam Note: Use moles, not mass, in rate.

Question 25. For the given reaction : RNH2 + H2O ⇌ RNH3+ + OH−; the pOH value for 10−2 N RNH2 solution is : (Given pKa for RNH3+ is 10)

Solution. Three. [OH−] = Cα = √(Kb/C) · C = √(KbC) = √((Kw/Ka) · C) = √(10−14/10−10 × 10−2) = √(10−6) = 10−3, so pOH = 3. Verified.

Teacher's Note: Kb = Kw/Ka = 10^-4 and weak-base [OH⁻] = √(KbC).

Exam Note: Use Kb = Kw/Ka, then √(KbC).

Question 26. van't Hoff's factor for very dilute solution of NaHSO4 is :

Solution. Three. NaHSO4 ⇌ Na+ + H+ + SO42− (i = 3).

Teacher's Note: In very dilute solution HSO4⁻ also ionises completely.

Exam Note: Count all ions at infinite dilution.

Question 27. Total number of aromatic isomers of the formula C7H8O are :

Solution. Five. The book prints Four, listing o-, m-, p-cresol, anisole and benzyl alcohol. Corrected: these are five aromatic isomers (three cresols, anisole and benzyl alcohol), so the answer is Five.

Teacher's Note: Count all positional and functional isomers containing a benzene ring.

Exam Note: List cresols, ether and alcohol.

Solution of Model Paper 4-B (Section A to E)

Question 1. Which of the following statement about chemical equilibrium are correct ? (I) For gaseous reaction, the equilibrium can be established in open container (II) The state of equilibrium is dynamic and not static (III) If temperature is kept constant, the colour of the reacting system changes with time (IV) For gaseous reaction, the equilibrium can be attained at constant volume or constant pressure. (a) I, II and IV (b) II and III (c) II and IV (d) I, II and III

Solution. (c) These are facts (II and IV are correct).

Teacher's Note: Equilibrium needs a closed system; at equilibrium macroscopic properties such as colour stay constant.

Exam Note: State dynamic and closed system.

Question 2. At 1 atm b.pt. of aqueous solution is greater than 100°C because : (I) non volatile solute on dissolution in water lowers the vapour pressure of solvent (II) non electrolyte solute on dissolution in water lowers the vapour pressure of solvent (III) electrolyte solute on dissolution in water lowers the vapour pressure of solvent (IV) chemical potential of water in solution is more than the chemical potential of water in pure state. (a) I, II and III (b) I, II and IV (c) I, II, III and IV (d) I, III and IV

Solution. The book's key is (c). Corrected: statement (IV) is false, because dissolving a solute lowers the chemical potential of water relative to pure water; only I, II and III are correct, so the answer is (a).

Teacher's Note: Solute lowers vapour pressure and chemical potential, so more heat is needed to reach 1 atm.

Exam Note: Chemical potential falls, not rises.

Question 3. According to Lewis concept, which of the following is correct acidic order ? (a) Fe3+ < Fe2+ (b) Na+ < K+ (c) Be2+ < B3+ (d) None of these

Solution. The book's key is (d), with the reason: the smaller the size of the cation, the more is its Lewis acid nature. Corrected: by the same reason Fe3+ > Fe2+ and Na+ > K+ (so (a) and (b) are wrong), while B3+ (smaller, higher charge) is a stronger Lewis acid than Be2+, so (c) is correct.

Teacher's Note: Lewis acidity of a cation rises with higher charge and smaller size.

Exam Note: Compare charge/size ratio.

Question 4. Which of the aqueous solution will act as buffer ? (I) CH3COOH + CH3COONH4 (II) NH4OH + CH3COONH4 (III) NaH2PO4 + Na2HPO4 (IV) H3BO3 + Na2B4O7 (a) III only (b) III and IV (c) I and II (d) I, II, III and IV

Solution. (d) All these act as buffer (an acid + its conjugate base is an acidic buffer, and a base + its conjugate acid is a basic buffer).

Teacher's Note: Each mixture has a weak acid or base with its conjugate partner.

Exam Note: Name acid/conjugate-base pair.

Question 5. Which of the following statement are correct about H atom ? (I) It can form a covalent bond with other atoms (II) It can form an ionic bond with other atoms, it self changing to H+ (III) It can form an ionic bond with other atoms, it self changing to H− (IV) It can form co-ordinate bond with other molecule. (a) I and II (b) I, II and III (c) I, II, III and IV (d) I and III

Solution. (b) H–H; H+Cl−, Na+H−; H+ can form co-ordinate bond and not H.

Teacher's Note: Only the H⁺ ion (empty 1s orbital) can accept a pair to form a coordinate bond.

Exam Note: Give example for each bond type.

Question 6. Which of the following statements are correctly reported ? (I) α-D(+)-glucose and β-D(+)-glucose are anomers (II) Fructose is reducing sugar and sucrose is not reducing sugar (III) Glucose is non reducing sugar (IV) Maltose shows mutarotation. (a) I, II and III (b) I, II and IV (c) I, III and IV (d) II, III and IV

Solution. (b) Glucose is a reducing sugar (so III is wrong).

Teacher's Note: Free hemiacetal OH gives reducing and mutarotating behaviour; sucrose has none.

Exam Note: Check for free anomeric carbon.

Question 7. The correct order of stability of the given carbanions is : 1. CH3–CH2− 2. CH2=CH− 3. CH≡C− 4. C6H5–CH2− (a) 1 > 2 > 3 > 4 (b) 4 > 3 > 1 > 2 (c) 4 > 3 > 2 > 1 (d) 1 > 2 > 4 > 3

Solution. (c) The benzylic carbanion is most stable due to resonance stabilisation. Also stable structures of carbanions possess negative charge on the more electronegative atom. Order of electronegativity of C in C̄≡CH, H̄C=CH2, H2C̄–CH3: sp > sp2 > sp3.

Teacher's Note: Resonance beats s-character; among non-resonating anions more s-character stabilises.

Exam Note: Rank resonance first, then s-character.

Question 8. I2 can be obtained from chili salt peter as : 2X + 6HSO3− → 2Y + 6SO42− + 6H+; 5Y + X → 2Z + 3H2O. In these reactions X, Y and Z respectively are : (a) I−, IO4− and I2 (b) I−, IO3− and I2 (c) IO3−, I− and I2 (d) IO4−, I− and I2

Solution. (c) 2IO3− + 6HSO3− → 2I− + 6SO42− + 6H+, then 5I− + IO3− + 6H+ → 3I2 + 3H2O (X = IO3−, Y = I−, Z = I2).

Teacher's Note: Chile saltpetre contains iodate; bisulphite reduces it to iodide, which comproportionates with more iodate.

Exam Note: Write both steps.

Question 9. Which of the following gives NH3 on heating to decomposition ? (I) (NH4)2Cr2O7 (II) (NH4)2SO4 (III) NH4NO3 (IV) NH4NO2 (a) II, III and IV (b) III and IV (c) II only (d) IV only

Solution. (c) (NH4)2Cr2O7 → N2 + 4H2O + Cr2O3; NH4NO3 → N2O + 2H2O; NH4NO2 → N2 + 2H2O; (NH4)2SO4 → NH3 + NH4HSO4.

Teacher's Note: Ammonium salts of oxidising anions oxidise NH4⁺ to N2/N2O instead of releasing NH3.

Exam Note: Only non-oxidising anion releases NH3.

Question 10. Select the correct choices : (a) Cu2O is added to glass to give ruby red colour (b) Normal domestic glass for windows is calcium alkali silicate (c) Glass is categorised amorphous solid on cooling its solution (d) Composition of glass may vary

Solution. (b, c, d) The book states 'Cu2O is added to impart blue colour to glass' to reject (a). Note for human check: Cu2O is in fact the agent for copper-ruby (red) glass, so by that reasoning (a) is also correct (a, b, c, d); the printed key is (b, c, d).

Teacher's Note: Glass is a supercooled amorphous solid of variable composition.

Exam Note: Recall colouring oxides of glass.

Question 11. Select the correct answers : (a) p-hydroxy phenol has higher b.pt than o-hydroxy phenol (b) o-hydroxy phenol has higher b.pt than phenol (c) p-hydroxy phenol has higher b.pt than phenol (d) The order of m.pt. of cresols is p-cresol > o-cresol > m-cresol

Solution. (a, c, d) o-Hydroxy phenol shows intramolecular H-bonding; p-hydroxy phenol shows (and phenol) intermolecular H-bonding (more stronger). The given order of m.pt. of cresol is experimental value: p-cresol 35°C, o-cresol 31°C, m-cresol 11°C. (As printed; (b) flagged for human check.)

Teacher's Note: Intermolecular H-bonding raises boiling point; chelation (intramolecular) lowers it.

Exam Note: Contrast intra- and intermolecular H-bonding.

Question 12. Which of the following cells do not need liquid junction potential ? (a) Fe(s)|FeO(s)|KOH(aq)|Ni2O3(s)|Ni (b) Cd|CdO(s)|KOH(aq)|NiO2(s)|Ni (c) Pb|PbSO4(s)|H2SO4|PbO2(s)|Pb (d) H2|Porous carbon rod (with Pt or Pd in finely divided state)|NaOH|Porous carbon rod with Co, Pt or Ag finely divided state|O2

Solution. (a, b, c, d) The first three show redox reaction and do not involve any solution state in it (one common electrolyte). The fourth is a fuel cell. Thus junction of two liquids is not present in any cell.

Teacher's Note: A liquid junction arises only where two different solutions touch.

Exam Note: Check for a single electrolyte.

Question 13. Kp for the reaction PCl5 ⇌ PCl3 + Cl2 is given by Kp = (n2/(1 − n)) × (P/(1 + n)) where P is the pressure at equilibrium and n is degree of dissociation of PCl5. Select the incorrect statement about this reaction if N2 is added at equilibrium : (a) On adding N2 at constant volume, 'n' decreases (b) On adding N2 at constant volume, 'n' increases (c) On adding N2 at constant pressure, 'n' increases (d) On adding N2 at constant pressure, the Kp changes

Solution. (a, b, d) If Δn ≠ 0 and the addition is at constant V, there is no effect. No doubt P increases but Σn (total mole) also increases; Kp remains constant in both cases. If addition of inert gas is made at constant P, Σn (i.e. 1 + n) increases and to have Kp constant n increases.

Teacher's Note: At constant V partial pressures are unchanged; at constant P the system expands, favouring more moles.

Exam Note: Separate constant V from constant P.

Question 14. Match the following (only one match is possible) : List A: (A) Heating glycerol with conc. H2SO4; (B) Hydrogenation of carbon; (C) Action of glyoxal with NaOH; (D) Reductive ozonolysis of ethyne. List B: 1. Glyoxal as one of the products; 2. 2-hydroxy ethanoic acid; 3. Synthetic petrol; 4. Acrolein

Solution. A—4; B—3; C—2; D—1

Teacher's Note: Glycerol dehydrates to acrolein; Bergius process gives synthetic petrol; glyoxal undergoes intramolecular Cannizzaro.

Exam Note: Learn each named reaction's product.

Question 15. Match the following (only one match is possible) : List A: (A) Amatol; (B) Brønsted acid; (C) Hypo; (D) Lewis acid. List B: 1. Explosive; 2. B(OH)3; 3. H3PO4; 4. Photography

Solution. A—1; B—3; C—4; D—2

Teacher's Note: B(OH)3 accepts OH⁻ (a Lewis acid) while H3PO4 donates H⁺.

Exam Note: Match use or acid type.

Question 16. Acid salt are the substances which possess one or more replaceable H-atom. The acid salts possess acidity as well as basicity. The basicity of acid salts depends on the nature of reaction whereas acidity refers for the total charge on metal cation. The acidity of BaxHy(PO4)z is : (a) 2 (b) 3 (c) 4 (d) 6

Solution. (c) Ba, H and PO4 are bivalent, monovalent and trivalent respectively: 2X + 1 × Y − (3 × Z) = 0; with Z = 2, 2X + Y = 6; X and Y are positive integers: if Y = 1 then X = 5/2; Y = 2 then X = 2; Y = 3 then X = 3/2. So X = 2, Y = 2 and the acidity (charge on cation) = 2 × 2 = 4.

Teacher's Note: Charge neutrality fixes x and y; acidity equals total cation charge.

Exam Note: Solve charge balance for integers.

Question 17. Which of the following is not acid salt ? (a) KH2PO3 (b) Ba(HPO3) (c) Ba(H2PO4)2 (d) KHC2O4

Solution. (b) H3PO3 is a dibasic acid, so HPO32− has no replaceable H (the H is bonded to P): Ba(HPO3) is a normal salt.

Teacher's Note: P–H hydrogen in phosphorous acid is not ionisable.

Exam Note: Count ionisable H in H3PO3.

Question 18. Which one is correct about AlxHy(PO4)z : (a) Y = 3(Z − X) (b) Y = Z − 2X (c) Y = X − Z (d) Y = 3Z − 2X

Solution. (a) 3·X + Y·1 − 3·Z = 0, so Y = 3Z − 3X = 3(Z − X).

Teacher's Note: Charge balance: Al³⁺ (+3), H⁺ (+1), PO4³⁻ (−3).

Exam Note: Write Σcharges = 0.

Question 19. The basicity of BaxHy(PO4)z in the reaction BaxHy(PO4)z + (y/2)Ba(OH)2 → Ba(x + y/2)(PO4)z + H2O is : (a) 1 (b) 2 (c) 3 (d) 4

Solution. (b) For BaxHy(PO4)z: 2X + Y = 6 (z = 2). For Ba(x+y/2)(PO4)z: 2X + Y = 6 as well. Also the salt obtained is a derivative of H3PO4 and Ba is bivalent, thus 2X should be an even number, so Y should be 2: 2X + 2 = 6, X = 2. Basicity = Y = 2.

Teacher's Note: Basicity counts replaceable H, which is y.

Exam Note: Find y from charge balance.

Question 20. Number of anti bonding electrons in CO+ according to molecular orbital theory are :

Solution. Three. CO+ is σ1s2, σ*1s2, σ2s2, [π2py2 π2pz2] σ2px2, σ*2s1 (13 electrons); the bond order of CO+ is 3.5, i.e. (10 − 3)/2.

Teacher's Note: Count electrons in σ* orbitals; bond order 3.5 confirms Na = 3.

Exam Note: Use bond order = (Nb − Na)/2.

Question 21. The heat of reaction of a redox change is 965 × 103 J. If the same redox change is made in the working of cell showing cell efficiency 60% and e.m.f. of 1.2 volt. What was the number of electrons involved in cell reaction ?

Solution. Five. η = ΔG/ΔH = nEF/ΔH; 0.6 = n × 1.2 × 9.65 × 104/(9.65 × 105), so n = 6/1.2 = 5. Verified.

Teacher's Note: Efficiency = electrical work (nFE) / heat of reaction.

Exam Note: Use η = nFE/ΔH.

Question 22. Mole fraction of a solute (in a solvent of molar mass 250) is 0.02. If elevation constant of solvent is 24.5 K molality−1, the elevation in b.pt. will be :

Solution. Two. n/(n + N) = 0.02, N/(n + N) = 0.98, n/N = 1/49; molality = (1/49) × (1000/250) = 1000/(49 × 250); ΔTb = Kb × molality = 24.5 × 1000/(49 × 250) = 2 K. Verified.

Teacher's Note: Convert mole fraction to molality using the solvent's molar mass.

Exam Note: Compute molality before ΔTb.

Question 23. A drop of solution (volume 0.05 mL) contains 3 × 10−2 mole of H+. If the rate constant of disappearance of H+ is 1.0 × 102 mol litre−1 minute−1. How long (in minute) will it take to disappear all the H+ ions ?

Solution. Six. 0.05 mL has 3 × 10−2 mol H+, so 1000 mL has 3 × 10−2 × 1000/0.05 = 600 mol H+. K = x/t (zero order, units of K are mol L−1 min−1); t = 600/(1 × 102) = 6 minute. Verified.

Teacher's Note: Units of k show zero order, so t = [A]₀/k.

Exam Note: Convert drop to mol per litre.

Question 24. If 2H2O(g) ⇌ 2H2(g) + O2(g); K1 = 2 × 10−13 and 2CO2(g) ⇌ 2CO(g) + O2(g); K2 = 7.2 × 10−12. The equilibrium constant for : CO2(g) + H2(g) ⇌ H2O(g) + CO(g) is :

Solution. Six. Kc = √(K2/K1) = √(7.2 × 10−12/2 × 10−13) = √36 = 6. Verified.

Teacher's Note: Target = ½(eq. 2) − ½(eq. 1), so K = √(K2/K1).

Exam Note: Halve and subtract the equations.

Question 25. Number of optical isomers for 1,3-dimethylallene (CH3CH=C=CHCH3) are :

Solution. Two. CH3(H)C=C=C(H)CH3 exists as a pair of enantiomers. Although there is no asymmetric carbon atom, it shows a pair of enantiomers; chirality, and not the presence of an asymmetric carbon atom, is the criterion for enantiomerism.

Teacher's Note: Allene with different groups on each end has a chiral axis.

Exam Note: Say chirality arises from the axis.

Question 26. C4H5N has degree of unsaturation a°. The value of a is :

Solution. Three. Disregard N but remove an H for each N. Thus C4H4 has 3° unsaturation.

Teacher's Note: Remove one H per N, then DoU = (2C + 2 − H)/2.

Exam Note: Apply the index formula.

Question 27. How many H atoms are bonded to a chiral methyl gp. ?

Solution. One. A chiral methyl group is CHDT (D–C(H)–T bonded to the rest of the molecule), so only one H is bonded to it.

Teacher's Note: Chirality needs H, D and T on the same carbon.

Exam Note: Write CHDT.

P Bahadur Solutions for JEE Mathematics: P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 4

Complete Math Solutions for P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 4

Review detailed solutions for JEE Mathematics. The P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 4 PDF provides comprehensive answers mapped to standard P Bahadur Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your JEE Exam Preparation

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these P Bahadur Solutions for JEE Chemistry?

They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the P Bahadur JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these P Bahadur solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising P Bahadur JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.