Official P Bahadur Textbook Solutions: JEE Chemistry Chapter 02 Mole Concept Equivalent Concept
Review structured textbook solutions for JEE Chemistry Chapter 02 Mole Concept Equivalent Concept prepared by P Bahadur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Chapter-wise Solutions for Chemistry: Chapter 02 Mole Concept Equivalent Concept
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Mole Concept and Equivalent Concept - PDF pages 1-40
Worked Examples
Example 1. 20 mL of 0.1 N BaCl2 is mixed with 30 mL of 0.2 N Al2(SO4)3. How many g of BaSO4 are formed?
Solution. BaCl2 + Al2(SO4)3 → AlCl3 + BaSO4. Meq before reaction: BaCl2 = 20×0.1 = 2; Al2(SO4)3 = 30×0.2 = 6.
BaCl2 is used up (2 Meq reacts with 2 Meq); Meq of BaSO4 formed = 2.
(w/E) × 1000 = 2 with E = 233/2, so w = 0.233 g.
Teacher's Note: Equal Meq of reactants react; Meq of product equals the limiting Meq.
Exam Note: Equivalent mass of BaSO4 is 233/2.
Worked Examples
Example 2. 20 mL of 0.1 M BaCl2 is mixed with 30 mL of 0.2 M Al2(SO4)3. What is the mass of BaSO4 formed?
Solution. By mole and millimole: 3BaCl2 + Al2(SO4)3 → 3BaSO4 + 2AlCl3. mmol BaCl2 = 20×0.1 = 2; mmol Al2(SO4)3 = 30×0.2 = 6. BaCl2 is limiting; mmol BaSO4 = 2, so w = 2×233/1000 = 0.466 g.
By equivalents (Meq): Meq BaCl2 = 20×0.1×2 = 4; Meq Al2(SO4)3 = 30×0.2×6 = 36. Meq of BaSO4 = 4: (w/E) × 1000 = 4 with E = 233/2, so w = 4×233/(2×1000) = 0.466 g.
Teacher's Note: Both mole and equivalent methods give the same product mass.
Exam Note: Meq = M × valency × V(mL) for solutions.
Numerical Problems
Question 1. How many g-atom and no. of atoms are there in (a) 60 g carbon, (b) 224.4 g Cu? Given atomic masses of C and Cu are 12 and 63.5 respectively. Avogadro's no. = 6.02×1023.
Solution. g-atom = mass/atomic mass; no. of atoms = mass × Av. No./atomic mass.
(a) 60 g C: g-atom = 60/12 = 5; atoms = 60 × 6.02×1023/12 = 30.1×1023.
(b) 224.4 g Cu: Corrected: with atomic mass 63.5 as given, g-atom = 224.4/63.5 = 3.53; atoms = 3.53 × 6.02×1023 = 2.13×1024 (the book used 63.6 and printed 21.24×1023).
Teacher's Note: Convert mass to g-atoms by dividing by atomic mass, then multiply by Avogadro's number.
Exam Note: Always use the atomic mass given in the question.
Question 2. Find the no. of g-atoms and mass of an element having 2×1023 atoms. Atomic mass of element is 32.
Solution. N atoms = 1 g-atom, so 2×1023 atoms = 2×1023/6.023×1023 = 0.33 g-atom.
Mass = 0.33 × 32 = 10.63 g.
Teacher's Note: g-atoms = atoms/N; mass = g-atoms × atomic mass.
Exam Note: Show both g-atom and mass for full marks.
Question 3. In 4 g-atoms of Ag. Calculate: (a) mass of Ag; (b) mass of one atom of Ag; atomic mass of Ag = 108.
Solution. (a) Mass of 4 g-atoms of Ag = 108 × 4 = 432 g.
(b) N atoms weigh 108 g, so 1 atom weighs 108/6.023×1023 = 17.93×10-23 g.
Teacher's Note: Mass of one atom = atomic mass divided by Avogadro's number.
Exam Note: State units: g, not amu, here.
Question 4. How many g-atoms are there in one atom?
Solution. N atoms = 1 g-atom, so 1 atom = 1/6.023×1023 = 1.66×10-24 g-atom.
Teacher's Note: One atom is 1/N g-atom; the value equals 1 amu in grams.
Exam Note: Quote the answer as 1.66×10-24 g-atom.
Question 5. If the diameter of a carbon atom is 0.15 nm, calculate the mass of carbon when atoms of carbon are placed side by side across the line of length 104 km.
Solution. Length = 104 km = 109 cm. Diameter of atom = 0.15 nm = 0.15×10-7 cm.
Atoms across the line = 109/0.15×10-7 = 6.67×1016.
Mass = 12 × 6.67×1016/6.023×1023 = 1.328×10-6 g = 1.328 μg.
Teacher's Note: Convert length and diameter to the same unit first, then count atoms.
Exam Note: Unit conversion of km to cm earns the first mark.
Question 6. Calculate mass of 1 atom of hydrogen.
Solution. N atoms of H weigh 1 g, so 1 atom weighs 1/6.023×1023 = 1.66×10-24 g.
Teacher's Note: Mass of one atom = atomic mass in g divided by N.
Exam Note: Give the value with unit g.
Question 7. Calculate the no. of atoms and volume of 1 g He gas at NTP.
Solution. 4 g He has 6.023×1023 atoms, so 1 g He has 6.023×1023/4 = 1.506×1023 atoms.
4 g He = 22.4 L at NTP, so 1 g He = 22.4/4 = 5.6 L.
Teacher's Note: Helium is monatomic, so atomic and molar masses are both 4 g.
Exam Note: Remember He is monatomic: atoms = molecules.
Question 8. How many mole and molecules of O2 are present in 64 g O2? What is the mass of one molecule of O2?
Solution. Moles of O2 = 64/32 = 2 mol.
Molecules = 2 × 6.023×1023 = 12.04×1023.
One molecule weighs 32/6.023×1023 = 5.313×10-23 g.
Teacher's Note: Mole = mass/molar mass; molecules = mole × N.
Exam Note: Use molar mass 32 for O2, not 16.
Question 9. How many years would it take to spend Avogadro's number of rupees at the rate of 10 lac rupees per second?
Solution. Rupees to spend = 6.023×1023; rate = 106 per second.
Rupees per year = 106×60×60×24×365.
Time = 6.023×1023/(106×60×60×24×365) = 1.9099×1010 year.
Teacher's Note: Divide the total by the yearly spending rate; 1 lac = 105.
Exam Note: 10 lac per second is 106; check powers of ten.
Question 10. From 200 mg of CO2, 1021 molecules are removed. How many g and mole of CO2 are left?
Solution. 44 g CO2 = 6.023×1023 molecules, so 1021 molecules = 44×1021/6.023×1023 = 7.31×10-2 g = 73.1 mg.
CO2 left = 200 − 73.1 = 126.9 mg.
Mole left = 126.9×10-3/44 = 2.88×10-3 mol.
Teacher's Note: Convert removed molecules to mass, subtract, then convert to mole.
Exam Note: Keep mg and g consistent before dividing by 44.
Question 11. Mass of one atom of an element is 6.644×10-23 g. Calculate g-atom of element in 40 kg.
Solution. Mass of N atoms = 6.644×10-23 × 6.023×1023 = 40 g, so 40 g = 1 g-atom.
40 kg = 40×103 g = 40×103/40 = 103 g-atom.
Teacher's Note: Atomic mass = mass of one atom × N; here it is 40.
Exam Note: Convert kg to g before finding g-atoms.
Question 12. How many g-atom of S are present in 49 g H2SO4?
Solution. 98 g H2SO4 contains 32 g S = 1 g-atom S, so 49 g contains 49/98 = 0.5 g-atom of S.
Teacher's Note: One mole of H2SO4 contains one g-atom of sulphur.
Exam Note: Link mole of compound to g-atoms of element via formula.
Question 13. The density of O2 at NTP is 1.429 g/L. Calculate the standard molar volume of gas.
Solution. 1.429 g of O2 occupies 1 litre at NTP, so 32 g occupies 32/1.429 = 22.39 L. Molar volume = 22.39 L mol-1.
Teacher's Note: Molar volume = molar mass/density at NTP.
Exam Note: Use molar mass 32 for O2.
Question 14. The measured density at NTP of He is 0.1784 g/L. What is the mass of one mole of He?
Solution. 22.4 L of He weighs 0.1784 × 22.4 = 4 g mol-1.
Teacher's Note: Molar mass = density × 22.4 L at NTP.
Exam Note: Quote the result with unit g mol-1.
Question 15. How many g of S are required to produce 100 mole and 100 g H2SO4 separately?
Solution. 1 mole H2SO4 contains 32 g S, so 100 mole needs 32 × 100 = 3200 g S.
98 g H2SO4 contains 32 g S, so 100 g needs 32×100/98 = 32.65 g S.
Teacher's Note: Distinguish 100 mole from 100 g: use molar mass only for the second.
Exam Note: Two separate answers are asked; label each.
Question 16. An alloy has Fe, Co and Mo equal to 71%, 12% and 17% respectively. How many cobalt atoms are there in a cylinder of radius 2.50 cm and a length of 10.0 cm? Density of alloy is 8.20 g/mL. Atomic mass of cobalt = 58.9.
Solution. Mass of alloy = πr2h × d = (22/7)(2.5)2×10×8.20 = 1610.7 g.
Mass of Co = 1610.7×12/100 = 193.3 g.
Atoms = 6.023×1023×193.3/58.9 = 19.8×1023.
Teacher's Note: Volume of cylinder, then mass, then mass of Co, then atoms.
Exam Note: Apply 12% to total mass, not volume.
Question 17. Calculate the number of Cl- and Ca2+ ions in 222 g anhydrous CaCl2.
Solution. Molar mass of CaCl2 = 111 g. 222 g = 2 mol.
Ca2+ ions = 2N = 12.05×1023.
Cl- ions = 4N = 24.09×1023.
Teacher's Note: Each CaCl2 gives one Ca2+ and two Cl-.
Exam Note: Multiply ions by the subscript in the formula.
Question 18. The dot at the end of this sentence has a mass of about one microgram. Assuming that black stuff is carbon, calculate approximate atoms of carbon needed to make such a dot.
Solution. Mass of carbon in dot = 1×10-6 g.
12 g C = 6.023×1023 atoms, so atoms = 6.023×1023×10-6/12 = 5×1016 atoms.
Teacher's Note: Convert microgram to gram, then use g-atom relation.
Exam Note: 1 μg = 10-6 g.
Question 19. Calculate the mole of water in 488 g BaCl2·2H2O.
Solution. 244 g BaCl2·2H2O contains 36 g H2O = 2 mol, so 488 g contains 2×488/244 = 4 mol H2O.
Teacher's Note: Molar mass of hydrate includes water of crystallisation: 244 g.
Exam Note: 488 g is exactly two moles of the hydrate.
Question 20. What is the molar mass of a substance, each molecule of which contains 9 carbon atoms, 13 hydrogen atoms and 2.33×10-23 g of other component?
Solution. Mass of 9 C atoms = 12×9 = 108 amu; 13 H atoms = 13 amu.
Other component = 2.33×10-23/1.66×10-24 = 14.04 amu.
Total = 108 + 13 + 14.04 = 135.04 amu, so molar mass = 135.04 g.
Teacher's Note: Convert the given mass to amu by dividing by 1.66×10-24 g.
Exam Note: The unknown component is nitrogen (14 amu).
Question 21. A plant virus is found to consist of uniform cylindrical particles of 150 Å in diameter and 5000 Å long. The specific volume of the virus is 0.75 cm3/g. If the virus is considered to be a single particle, find its molar mass. (IIT 1999)
Solution. Volume of virus = πr2l = (22/7)(150/2)2×10-16 × 5000×10-8 = 0.884×10-16 cm3.
Mass of one virus = 0.884×10-16/0.75 = 1.178×10-16 g.
Molar mass = 1.178×10-16 × 6.023×1023 = 7.095×107 g mol-1.
Teacher's Note: Cylinder volume, divide by specific volume, then multiply by N.
Exam Note: Convert Å to cm: 1 Å = 10-8 cm.
Question 22. K-40 is a naturally occurring radioactive isotope having natural abundance 0.012% of potassium isotopes. How many K-40 atoms do you ingest by drinking one cup of whole milk containing 370 mg K?
Solution. Mass of K-40 in 370 mg K = 370×0.012/100 = 0.0444 mg.
40 g K-40 = 6.023×1023 atoms, so atoms = 6.023×1023×0.0444×10-3/40 = 6.69×1017 atoms.
Teacher's Note: Take the isotopic percentage of the total mass, then convert to atoms.
Exam Note: Percentage 0.012 means 0.012 per 100.
Question 23. The vapour density of a mixture containing NO2 and N2O4 is 38.3 at 27°C. Calculate the mole of NO2 in 100 g mixture.
Solution. Molar mass of mixture = 38.3×2 = 76.6.
Let a g be NO2 in 100 g: a/46 + (100−a)/92 = 100/76.6, giving a = 20.10 g.
Mole of NO2 = 20.10/46 = 0.437.
Teacher's Note: Total moles = 100/76.6; set up two-component mole balance.
Exam Note: Molar mass = 2 × vapour density.
Question 24. The vapour density of a mixture containing NO2 and N2O4 is 38.3 at 27°C. Calculate the mole of NO2 in 100 mole mixture.
Solution. Molar mass of mixture = 76.6. Let a mol be NO2: 46a + (100−a)×92 = 100×76.6.
9200 − 46a = 7660, so a = 33.48 mol.
Teacher's Note: Average molar mass equals total mass over total moles.
Exam Note: Here the basis is 100 mole, not 100 g.
Question 25. Calculate molecules of methane, C and H atoms in 25 g methane.
Solution. 16 g CH4 = N molecules, so 25 g = 6.023×1023×25/16 = 9.41×1023 molecules.
C atoms = 9.41×1023 (one per molecule).
H atoms = 4 × 9.41×1023 = 3.764×1024.
Teacher's Note: Each CH4 molecule has 1 C and 4 H atoms.
Exam Note: Multiply molecules by atoms per molecule.
Question 26. Calculate no. of oxalic acid molecules in 100 mL of 0.02 N oxalic acid. (Roorkee 1992)
Solution. Molarity = 0.02/2 = 0.01 M (valency factor of oxalic acid is 2).
Mole of oxalic acid = 0.01 × 100/1000 = 0.001 mol.
Molecules = 0.001×6.023×1023 = 6.023×1020.
Teacher's Note: Convert normality to molarity using n-factor 2 for oxalic acid.
Exam Note: M = N / n-factor.
Question 27. Calculate the number of atoms of oxygen present in 88 g CO2. What would be the mass of CO having the same no. of oxygen atoms?
Solution. 44 g CO2 = 2N oxygen atoms, so 88 g = 2×6.023×1023×88/44 = 24.092×1023 O atoms.
28 g CO contains N O atoms, so mass of CO = 28×24.092×1023/6.023×1023 = 112 g.
Teacher's Note: Count O atoms per molecule: 2 in CO2, 1 in CO.
Exam Note: Compare number of oxygen atoms, not molecules.
Question 28. A compound contains 28% N and 72% of a metal by mass. Three atoms of metal combine with two atoms of N. Find the atomic mass of metal.
Solution. Reaction: 3M + 2N → M3N2. Let atomic mass of metal = a. (3a + 28) g of M3N2 contains 3a g metal.
100 g contains 3a×100/(3a+28) = 72, so a = 24.
Teacher's Note: Write the nitride formula from the atom ratio, then equate mass percentage.
Exam Note: Atomic mass 24 corresponds to magnesium (Mg3N2).
Question 29. Insulin contains 3.4% sulphur. Calculate minimum molar mass of insulin.
Solution. For minimum molar mass, insulin must have at least one S atom per molecule.
3.4 g S is in 100 g insulin, so 32 g S is in 100×32/3.4 = 941.176 g. Minimum molar mass = 941.176.
Teacher's Note: Assume one atom of the element per molecule to get the minimum molar mass.
Exam Note: Say 'minimum' and assume one S atom.
Question 30. Haemoglobin contains 0.25% iron by mass. The molar mass of haemoglobin is 89600. Calculate the no. of iron atoms per molecule of haemoglobin.
Solution. 0.25 g Fe is in 100 g haemoglobin, so in 89600 g there is 0.25×89600/100 = 224 g Fe.
One mole of haemoglobin has 224/56 = 4 g-atom Fe, so one molecule has 4 Fe atoms.
Teacher's Note: Mass of iron per mole of protein divided by 56 gives atoms per molecule.
Exam Note: Divide by 56, not 55.5, for the book's answer.
Question 31. P and Q are two elements which form P2Q3 and PQ2. If 0.15 mole of P2Q3 weighs 15.9 g and 0.15 mole of PQ2 weighs 9.3 g, what are atomic masses of P and Q?
Solution. Let atomic masses of P and Q be a and b. P2Q3: 2a + 3b = 15.9/0.15 = 106.
PQ2: a + 2b = 9.3/0.15 = 62.
Solving: b = 18, a = 26.
Teacher's Note: Molar mass = mass/mole gives two simultaneous equations.
Exam Note: Form equations from molar masses, then solve.
Question 32. Calculate the residue obtained on strongly heating 2.76 g Ag2CO3.
Solution. Ag2CO3 → 2Ag + CO2 + ½O2. Molar mass of Ag2CO3 = 276.
276 g gives 216 g Ag, so 2.76 g gives 2.16 g Ag (residue).
Teacher's Note: On strong heating the silver carbonate leaves only silver metal.
Exam Note: The residue is Ag, not Ag2O.
Question 33. By heating 10 g CaCO3, 5.6 g CaO is formed. What is the mass of CO2 obtained in this reaction?
Solution. CaCO3 → CaO + CO2. 100 g gives 56 g CaO and 44 g CO2.
10 g CaCO3 gives 5.6 g CaO and 4.4 g CO2.
Teacher's Note: Mass conservation: 10 − 5.6 gives the CO2 mass directly.
Exam Note: Check: 5.6 + 4.4 = 10.
Question 34. On heating 1.763 g of hydrated BaCl2 to dryness, 1.505 g of anhydrous salt remained. What is the formula of hydrate?
Solution. BaCl2·nH2O → BaCl2 + nH2O. (208 + 18n) g of hydrate gives 208 g BaCl2.
208×1.763/(208 + 18n) = 1.505, so n = 1.98 ≈ 2.
Formula: BaCl2·2H2O.
Teacher's Note: Ratio of anhydrous mass to hydrate mass gives n.
Exam Note: Round n to the nearest whole number.
Question 35. Calculate the mass of iron which will be converted into its oxide by the action of 18 g of steam.
Solution. 3Fe + 4H2O → Fe3O4 + 4H2.
Mole of Fe = (18/18)×(3/4) = 3/4. Mass of Fe = 0.75 × 56 = 42 g.
Teacher's Note: Steam converts iron to Fe3O4; use the 3:4 mole ratio.
Exam Note: Write the balanced equation first.
Question 36. Copper forms two oxides. For the same amount of copper, twice as much oxygen was used to form first oxide than to form second one. What is the ratio of the valencies of copper in first and second oxides?
Solution. Let valencies be x and y: first oxide Cu2Ox-type, second Cu2Oy-type.
First oxide: w/(A/x) = a/8. Second oxide (oxygen used is half): w/(A/y) = a/(2×8).
Dividing, x/y = 2/1. Ratio of valencies = 2 : 1.
Teacher's Note: Equivalents of Cu equal equivalents of oxygen; oxygen is doubled in the first oxide.
Exam Note: Equate equivalents of Cu and O in both oxides.
Question 37. Calculate the volume of O2 and volume of air needed for combustion of 1 kg carbon at STP.
Solution. C + O2 → CO2. 12 g C needs 22.4 L O2.
1000 g C needs 22.4×1000/12 = 1866.67 L O2.
Air (20% O2 by volume) = 5 × 1866.67 = 9333.35 L.
Teacher's Note: Use 22.4 L per mole at STP and 1/5 oxygen in air.
Exam Note: State the assumption: air is 20% O2 by volume.
Question 38. Nitrogen content in a sample of urea is 42.5%. What is the percentage purity of urea in urea sample?
Solution. Urea NH2CONH2 has molar mass 60 and nitrogen 28.
28 g N is in 60 g urea, so 42.5 g N is in 60×42.5/28 = 91.07 g urea.
The sample is 100 g, so purity = 91.07%.
Teacher's Note: Convert nitrogen content into urea content using 28 : 60.
Exam Note: Pure urea has 46.67% N; purity is the ratio.
Question 39. Calculate the mass of lime (CaO) obtained by heating 200 kg of 95% pure limestone (CaCO3).
Solution. Pure CaCO3 in 200 kg = 95×200/100 = 190 kg.
CaCO3 → CaO + CO2: 100 kg gives 56 kg CaO, so 190 kg gives 56×190/100 = 106.4 kg CaO.
Teacher's Note: Account for purity first, then use the 100 : 56 mass ratio.
Exam Note: Apply the 95% purity before stoichiometry.
Question 40. 4.125 g of a metallic carbonate was heated and the CO2 evolved was found to measure 1336 mL at 27°C and 700 mm pressure. What is equivalent mass of metal?
Solution. For CO2: PV = (w/m)RT gives (700/760)(1336/1000) = (w/44)(0.0821)(300), so w = 2.20 g (0.05 mole, i.e. 0.1 eq).
Metal carbonate M2(CO3)n with atomic mass a: 4.125 g carbonate gives 2.20 g CO2.
Equivalents of carbonate = equivalents of CO2 = 2.20/22 = 0.1. Mass of metal = 4.125 − 0.1×30 = 1.125 g.
Corrected: equivalent mass = 1.125/0.1 = 11.25. (The book solution used 4.215 g instead of the 4.125 g in the question and printed 12.15.)
Teacher's Note: Equate equivalents of metal carbonate and CO2; carbonate eq mass = metal + 30.
Exam Note: Read the given mass carefully before substituting.
Question 41. From the following reaction sequence: Cl2 + 2KOH → KCl + KClO + H2O; 3KClO → 2KCl + KClO3; 4KClO3 → 3KClO4 + KCl. Calculate the mass of chlorine needed to produce 100 g of KClO4.
Solution. Adding the three reactions: 12Cl2 + 24KOH → 3KClO4 + 21KCl + 12H2O.
Molar mass of KClO4 = 138.5. 3×138.5 g KClO4 needs 12×71 g Cl2.
100 g KClO4 needs 12×71×100/(3×138.5) = 205.05 g Cl2.
Teacher's Note: Combine the sequence into one overall balanced equation before ratios.
Exam Note: Sum equations after matching intermediates.
Question 42. Potassium selenate is isomorphous with potassium sulphate and contains 45.42% selenium by mass. Calculate the atomic mass of selenium. Also report the equivalent mass of potassium selenate.
Solution. K2SeO4 is isomorphous with K2SO4. Molar mass = 142 + a (a is atomic mass of Se).
% Se = 100a/(142 + a) = 45.42, so a = 118.2.
Equivalent mass of K2SeO4 = molar mass/2 = (78 + 118.2 + 64)/2 = 130.1.
Teacher's Note: Isomorphism gives the formula K2SeO4; equivalent mass is M/2.
Exam Note: Divide by total charge (2) for salt equivalent mass.
Question 43. A hydrocarbon contains 10.5 g of carbon per g of H. One litre vapours of hydrocarbon at 127°C and 1 atm pressure weighs 2.8 g. Find molecular formula of hydrocarbon.
Solution. C : H = 10.5 : 1, so 11.5 g has 1 g H.
PV = (w/M)RT: 1×1 = (2.8/M)×0.0821×400, so M = 92.
92 g has 92×1/11.5 = 8 g H = 8 g-atom, and 84 g C = 7 g-atom. Formula = C7H8.
Teacher's Note: Find molar mass from the gas law, then split by the mass ratio.
Exam Note: Convert 127°C to 400 K.
Question 44. The reaction, 2C + O2 → 2CO is carried out by taking 24 g of carbon and 96 g O2, find out: (a) Which reactant is left in excess? (b) How much of it is left? (c) How many mole of CO are formed? (d) How many g of other reactant should be taken so that nothing is left at the end of reaction?
Solution. 2C + O2 → 2CO. Mole of C = 24/12 = 2; mole of O2 = 96/32 = 3. Ratio C : O2 : CO = 2 : 1 : 2.
(a) O2 is in excess.
(b) O2 left = 3 − 1 = 2 mol = 64 g.
(c) CO formed = 2 mol = 56 g.
(d) To use 3 mol O2 completely, total 6 mol carbon = 72 g is needed (i.e. 48 g more).
Teacher's Note: Find the limiting reagent by comparing moles with the equation ratio.
Exam Note: Mole ratio decides excess, not mass.
Question 45. Calculate the mass of FeO produced from 2 g VO and 5.75 g of Fe2O3. Also report the limiting reagent. VO + Fe2O3 → FeO + V2O5
Solution. Balanced: 2VO + 3Fe2O3 → 6FeO + V2O5. Mole VO = 2/67 = 0.0298; mole Fe2O3 = 5.75/160 = 0.0359.
VO would need 0.0298×3/2 = 0.0447 mol Fe2O3, more than available, so Fe2O3 is used up.
FeO formed = 0.0359×2 = 0.0718 mol, mass = 0.0718×72 = 5.17 g. Limiting reagent: Fe2O3.
Teacher's Note: Balance first; the reagent finishing first limits the product.
Exam Note: Balance the equation before computing moles.
Question 46. A polystyrene, having formula Br3C6H3(C8H8)n was prepared by heating styrene with tribromobenzoyl peroxide in the absence of air. If it was found to contain 10.46% bromine by mass, find the value of n.
Solution. Moles of Br in 100 g polystyrene = 10.46/80 = 0.1308.
Br = 3 × moles of polymer = 3×100/(315 + 104n) = 0.1308, giving n = 19.
Teacher's Note: Three Br atoms per polymer molecule link mole of Br to the polymer.
Exam Note: Molar mass of the repeat unit C8H8 is 104.
Question 47. One litre of a mixture of CO and CO2 is passed through red hot charcoal in tube. The new volume becomes 1.4 litre. Find out % composition of mixture by volume. All measurements are made at same P and T.
Solution. Only CO2 reacts with charcoal: CO2 + C → 2CO. Let CO = a L, CO2 = b L.
a + b = 1 and a + 2b = 1.4, so b = 0.4 L, a = 0.6 L.
CO2 = 40%, CO = 60% by volume.
Teacher's Note: Volume increases by one per CO2 converted into 2CO.
Exam Note: Gas volumes follow mole ratios at constant P, T.
Question 48. One litre of CO2 is passed over hot coke. The volume becomes 1.4 litre. Find the composition of products, assuming measurements at NTP.
Solution. CO2 + C → 2CO. Initial 1 L; final (1 − a) + 2a = 1.4, so a = 0.4 L.
CO2 left = 0.6 L; CO formed = 2×0.4 = 0.8 L.
Teacher's Note: Volume change equals the volume of CO2 reacted.
Exam Note: Report both remaining CO2 and CO formed.
Question 49. 5 mL of a gaseous hydrocarbon was exposed to 30 mL of O2. The resultant gas, on cooling, is found to measure 25 mL of which 10 mL are absorbed by NaOH and the remainder by pyrogallol. Determine molecular formula of hydrocarbon. All measurements are made at constant pressure and temperature.
Solution. CaHb + (a + b/4)O2 → aCO2 + (b/2)H2O(l). CO2 formed = volume absorbed by NaOH = 10 mL, so 5a = 10, a = 2.
O2 used = 30 − 15 = 15 mL: 5(a + b/4) = 15, so 5(2 + b/4) = 15 and b = 4.
Hydrocarbon is C2H4.
Teacher's Note: NaOH absorbs CO2; pyrogallol absorbs leftover O2.
Exam Note: Water condenses on cooling; ignore its volume.
Question 50. When a mixture of 10 mole of SO2, 15 mole of O2 was passed over catalyst, 8 mole of SO3 was formed. How many mole of SO2 and O2 did not enter into combination?
Solution. 2SO2 + O2 → 2SO3. Final: SO2 = 10 − 2x, O2 = 15 − x, SO3 = 2x = 8, so x = 4.
SO2 left = 10 − 8 = 2 mol; O2 left = 15 − 4 = 11 mol.
Teacher's Note: Use the extent of reaction x from the SO3 formed.
Exam Note: Unreacted amounts are initial minus combined.
Question 51. A mixture of 20 mL of CO, CH4 and N2 was burnt in excess of O2 resulting in reduction of 13 mL of volume. The residual gas was then treated with KOH solution to show a contraction of 14 mL in volume. Calculate volume of CO, CH4 and N2 in mixture. All measurements are made at constant pressure and temperature. (IIT 1995)
Solution. Let CO = a, CH4 = b, N2 = c mL: a + b + c = 20 …(1).
CO + ½O2 → CO2; CH4 + 2O2 → CO2 + 2H2O(l). KOH absorbs CO2: a + b = 14 …(2).
Contraction = O2 used (a/2 + 2b) = 13 …(3).
Solving: a = 10 mL (CO), b = 4 mL (CH4), c = 6 mL (N2).
Teacher's Note: Three equations: total volume, CO2 absorbed, and contraction on burning.
Exam Note: N2 does not react; water condenses.
Question 52. 50 mL of dry ammonia gas was sparked for a long time in an eudiometer tube over mercury. After sparking, the volume becomes 97 mL. After washing the gas with water and drying, the volume becomes 94 mL. This was mixed with 60.5 mL of oxygen and the mixture was burnt. After the completion of the combustion of H2, the volume of the residual gas was 48.75 mL. Derive molecular formula of ammonia.
Solution. Let ammonia be NaHb → (a/2)N2 + (b/2)H2. If x mL decomposes: (50 − x) + ax/2 + bx/2 = 97.
Washing removes undecomposed NH3: 50 − x = 3, so x = 47 mL. N2 = 47a/2, H2 = 47b/2; 47a/2 + 47b/2 = 94, so a + b = 4 …(1).
H2 + ½O2 → H2O: O2 left = 60.5 − 47b/4. Residual gas: 47a/2 + 60.5 − 47b/4 = 48.75 …(2).
From (1) and (2): a = 1, b = 3. Formula is NH3.
Teacher's Note: Washing with water removes undecomposed NH3; burning removes H2.
Exam Note: Two volume equations fix a and b.
Question 53. The percentage by volume of C3H8 in a mixture of C3H8, CH4 and CO is 36.5. Calculate the volume of CO2 produced when 100 mL of the mixture is burnt in excess of O2.
Solution. C3H8 gives 3 vol CO2, CH4 gives 1, CO gives 1 per volume burnt.
With 36.5 mL C3H8 and 63.5 mL of the rest: CO2 = 3×36.5 + 63.5 = 173 mL.
Teacher's Note: Only propane yields three volumes of CO2; the others give one each.
Exam Note: Percentage by volume equals mL in 100 mL.
Question 54. 100 mL of any gas at NTP was heated with Tin. Tin converted into stannous sulphide and hydrogen was left. This hydrogen when passed over CuO, produced 0.081 g of water. If the vapour density of the gas is 17, find its formula.
Solution. HaSb + bSn → bSnS + (a/2)H2; H2 + CuO → Cu + H2O (1 : 1).
100/22400 × (2/a) = 0.081/18, giving a = 2.
Molar mass = 2 × 17 = 34 = 2 + 32b, so b = 1. The gas is H2S.
Teacher's Note: Moles of water equal moles of H2; link to moles of gas through a/2.
Exam Note: Molar mass = 2 × vapour density.
Question 55. A gaseous alkane is exploded with oxygen. The volume of O2 for complete combustion to CO2 formed is in the ratio of 7 : 4. Deduce molecular formula of alkane.
Solution. CnH2n+2 + [n + (n+1)/2]O2 → nCO2 + (n+1)H2O(l).
[n + (n+1)/2]/n = 7/4, so 12n + 4 = 14n, n = 2. Alkane is C2H6.
Teacher's Note: Write the general alkane combustion and equate the O2 : CO2 ratio.
Exam Note: General formula CnH2n+2 gives the setup.
Question 56. 40 mL ammonia gas taken in an eudiometer tube was subjected to sparks till the volume did not further change. The volume was found to increase by 40 mL. 40 mL of oxygen was then mixed and the mixture was further exploded. The gases remained were 30 mL. Deduce formula of ammonia. All measurements are made at constant P and T. Assume H2O in liquid phase.
Solution. NaHb → (a/2)N2 + (b/2)H2. From 40 mL: N2 = 20a, H2 = 20b; volume increase 20a + 20b − 40 = 40, so a + b = 4 …(1).
H2 + ½O2 → H2O(l): O2 left = 40 − 10b. Gases left: 40 − 10b + 20a = 30, so b − 2a = 1 …(2).
a = 1, b = 3. Formula is NH3.
Teacher's Note: Increase in volume after sparking fixes a + b; leftover gas after burning fixes the other equation.
Exam Note: Water is liquid; its volume is ignored.
Question 57. The mass of one litre sample of ozonised oxygen at NTP was found to be 1.5 g. When 100 mL of this mixture at NTP were treated with terpentine oil, the volume was reduced to 90 mL. Hence calculate the molar mass of ozone.
Solution. Terpentine oil absorbs ozone: O3 = 10 mL, O2 = 90 mL in 100 mL.
Molar mass of mixture = wRT/PV = 1.5×0.0821×273/1 = 33.62.
33.62 = (900×32 + 100×a)/1000, so a = 48.2 (≈ 48, ozone is O3).
Teacher's Note: Average molar mass of the mixture weighted by volume fractions.
Exam Note: Terpentine oil removes only ozone.
Question 58. 60 mL of a mixture of nitrous oxide and nitric oxide was exploded with excess of hydrogen. If 38 mL of N2 was formed, calculate the volume of each gas in mixture. All measurements are made at constant P and T. Assume H2O in liquid phase.
Solution. Let NO = a mL and N2O = b mL: a + b = 60 …(1).
NO + H2 → ½N2 + H2O gives a/2 volume of N2; N2O + H2 → N2 + H2O gives b: a/2 + b = 38 …(2).
Solving: NO = 44 mL, N2O = 16 mL.
Teacher's Note: One volume NO gives half a volume of N2; N2O gives one volume.
Exam Note: Write both reactions with excess hydrogen.
Question 59. 50 mL of pure and dry oxygen was subjected to a silent electric discharge and on cooling to the original temperature, the volume of ozonised oxygen was found to be 47 mL. The gas was then brought into contact with terpentine oil, when after the absorption of ozone, the remaining gas occupied a volume of 41 mL. Find molecular formula of ozone. All measurements are made at constant P and T.
Solution. nO2 → 2On. Let a mL O2 convert: volume O2 left = 50 − a = 41, so a = 9.
Ozone formed = 47 − 41 = 6 mL, so 2a/n = 6, giving n = 3. Ozone is O3.
Teacher's Note: Gas left after terpentine is pure O2; ozone volume is the difference.
Exam Note: Use contraction to find ozone volume.
Question 60. A sample of gaseous hydrocarbon occupying 1.12 litre at NTP, when completely burnt in air produced 2.2 g CO2 and 1.8 g H2O. Calculate the mass of hydrocarbon taken and the volume of O2 at NTP required for its combustion.
Solution. CaHb + (a + b/4)O2 → aCO2 + (b/2)H2O(l).
1.12 L = 0.05 mol. CO2 = 2.2/44 = 0.05 mol gives a = 1; H2O = 1.8/18 = 0.1 mol gives b = 4. Hydrocarbon is CH4.
Mass = 16×1.12/22.4 = 0.8 g. O2 needed = 2 mol per mol CH4 = 2×22.4×1.12/22.4 = 2.24 L.
Teacher's Note: Mole of CO2 and H2O per mole of hydrocarbon fixes the formula.
Exam Note: Find formula first, then mass and O2 volume.
Question 61. 16 mL of a gaseous aliphatic compound CnH3nOn was mixed with 60 mL O2 and sparked. The gas mixture on cooling occupied 44 mL. After treatment with KOH, the volume of gas remaining was 12 mL. Deduce the formula of compound. All measurements are made at constant pressure and room temperature.
Solution. CnH3nOm + (n + 3n/4 − m/2)O2 → nCO2 + (3n/2)H2O(l).
CO2 = volume absorbed by KOH: 16n = 44 − 12 = 32, so n = 2.
O2 used = 60 − 12 = 48 = 16(2 + 3/2 − m/2), so m = 1. Compound is C2H6O.
Teacher's Note: KOH absorbs CO2; the rest is unused O2.
Exam Note: Include oxygen already in the compound.
Question 62. A 5.0 g sample of a natural gas consisting of CH4, C2H4 was burnt in excess of oxygen yielding 14.5 g CO2 and some H2O as products. What is mass percentage of CH4 and C2H4 in mixture?
Solution. Mole of CO2 = 14.5/44 = 0.330. Let CH4 = a mol, C2H4 = b mol: a + 2b = 0.330 …(1); 16a + 28b = 5.0 …(2).
b = 0.07, a = 0.19. Mass CH4 = 3.04 g; C2H4 = 1.96 g.
CH4 = 60.8%, C2H4 = 39.2%.
Teacher's Note: Carbon balance and total mass give two equations.
Exam Note: Percentages must sum to 100.
Question 63. 4 g C3H8 and 14 g O2 are allowed to react to maximum possible extent to form only CO and H2O. Find the mass of CO formed.
Solution. C3H8 + (7/2)O2 → 3CO + 4H2O. Moles: C3H8 = 4/44, O2 = 14/32 = 0.4375.
O2 needed for all propane = (4/44)(7/2) = 0.318, which is less, so propane is limiting.
CO = 3×4/44 = 0.2727 mol, mass = 7.636 g.
Teacher's Note: Identify the limiting reagent before computing product.
Exam Note: Only CO (not CO2) forms here.
Question 64. Assume that the nucleus of the F atom is a sphere of radius 5×10-13 cm. Calculate the density of matter in F nucleus.
Solution. Mass of nucleus = volume × density: 19/6.023×1023 = (4/3)π(5×10-13)3 × d.
d = 6.02×1013 g mL-1.
Teacher's Note: Nearly all atomic mass sits in the nucleus; use sphere volume.
Exam Note: Radius is 5×10-13 cm; cube it carefully.
Question 65. A metal M of atomic mass 54.94 has a density of 7.42 g/cm3. Calculate the volume occupied and the radius of the atom of this metal assuming it to be sphere.
Solution. Mass of one atom = 54.94/6.023×1023 = volume × 7.42.
Volume = (4/3)πr3 = 1.23×10-23 cm3; radius r = 1.432×10-8 cm.
Teacher's Note: Atom volume = atomic mass/(N × density).
Exam Note: Radius from V = (4/3)πr3.
Question 66. A granulated sample of aircraft alloy (Al, Mg, Cu) weighing 8.72 g was first treated with alkali and then with very dilute HCl, leaving a residue. The residue after alkali boiling weigh 2.10 g and the acid insoluble residue weigh 0.69 g. What is the composition of the alloy?
Solution. Only Al reacts with NaOH; then only Mg reacts with dilute HCl; Cu does not.
a + b + c = 8.72; b + c = 2.10; c = 0.69, so b = 1.41 g, a = 6.62 g.
Al = 75.9%, Mg = 16.2%, Cu = 7.9%.
Teacher's Note: Successive residues give each metal by subtraction.
Exam Note: Match each reagent with the metal it dissolves.
Question 67. Calculate the mass of CaO required to remove the hardness of 106 litre of water containing 1.62 g of calcium bicarbonate per litre.
Solution. CaO + Ca(HCO3)2 → 2CaCO3 + H2O. Equivalents of Ca(HCO3)2 per litre = 1.62/(162/2) = 0.02.
Equivalents of CaO needed for 106 L = 0.02×106. Mass = 0.02×106×56/2 = 5.6×105 g.
Teacher's Note: Clark's method: equivalents of lime equal equivalents of bicarbonate.
Exam Note: Equivalent mass of CaO is 28.
Question 68. One litre of sample of hard water contains 1 mg of CaCl2 and 1 mg of MgCl2. Find the total hardness of water in terms of CaCO3 per 106 parts of water by mass.
Solution. mmol MgCl2 = 1/95; mmol CaCl2 = 1/111.
Both bivalent, so mmol CaCO3 equivalent = 1/95 + 1/111. Mass in 1000 mL = (206/(111×95)) × 100/1000 g.
Hardness = 206×100×106/(111×95×1000×1000) = 1.953 ppm.
Teacher's Note: Express each salt as an equal number of moles of CaCO3 (both bivalent).
Exam Note: Hardness is mass of CaCO3 per 106 parts water.
Question 69. 1.60 g of a metal were dissolved in HNO3 to prepare its nitrate. The nitrate was strongly heated to give 2 g oxide. Calculate equivalent mass of metal.
Solution. M(NO3)n → M2On: equivalents of metal = equivalents of oxygen.
1.60/E = (2 − 1.6)/8, so E = 32.
Teacher's Note: Oxide mass minus metal mass gives oxygen; eq of O is 8.
Exam Note: Oxygen mass = oxide − metal.
Question 70. 1.0 g of metal nitrate gave 0.86 g of metal sulphate. Calculate equivalent mass of metal.
Solution. M(NO3)n → M2(SO4)n: equivalents are equal.
1/(E + 62) = 0.86/(E + 48), so E = 38.
Teacher's Note: Equivalent mass of salt = E of metal + E of anion (62 nitrate, 48 sulphate).
Exam Note: Sulphate eq mass is 48, nitrate 62.
Question 71. 1.35 g of pure Ca metal was quantitatively converted into 1.88 g of pure CaO. What is atomic mass of Ca?
Solution. Ca + ½O2 → CaO: 1.35/E = 1.88/(E + 8), so E = 20.375.
Atomic mass = 20.375 × 2 = 40.75 (valency 2).
Teacher's Note: Equivalent of metal equals equivalent of oxide; add 8 for oxygen.
Exam Note: Multiply E by valency to get atomic mass.
Question 72. 2 g of a metal in H2SO4 gives 4.51 g of the metal sulphate. The specific heat of metal is 0.057 cal/g. Calculate the valency and atomic mass of metal.
Solution. Atomic mass × specific heat ≈ 6.4, so a = 6.4/0.057 = 112.28.
Equivalents of metal = equivalents of sulphate: 2/E = 4.51/(E + 48), so E = 38.24.
Valency = 112.28/38.24 = 2.94 ≈ 3. Exact atomic mass = 38.24 × 3 = 114.72.
Teacher's Note: Dulong–Petit gives approximate atomic mass; equivalent mass fixes the integer valency.
Exam Note: Round valency to a whole number, then recompute atomic mass.
Question 73. 1.878 g of MBrx, when heated in a stream of HCl gas, was completely, converted to chloride MClx, which weighed 1.0 g. The specific heat of metal is 0.14 cal/g. Calculate molar mass of metal bromide.
Solution. MBrx + xHCl → MClx + xHBr; equivalents equal: 1.878/(E + 80) = 1.0/(E + 35.5), so E = 15.18.
Approximate atomic mass = 6.4/0.14 = 45.71; valency = 45.71/15.18 = 3.01 ≈ 3.
Exact atomic mass = 15.18 × 3 = 45.54. Molar mass of MBr3 = 45.54 + 240 = 285.54.
Teacher's Note: Same equivalent mass for bromide and chloride; Dulong–Petit fixes valency.
Exam Note: Add 80 for bromide, 35.5 for chloride per equivalent.
Question 74. A hydrated sulphate of metal contained 8.1% metal and 43.2% SO42- by mass. The specific heat of metal is 0.24 cal/g. What is hydrated sulphate?
Solution. Atomic mass ≈ 6.4/0.24 = 26.67. Let sulphate be M2(SO4)n·mH2O.
Equivalents: 8.1/E = 43.2/48, so E = 9; valency n = 26.67/9 ≈ 3; exact atomic mass = 27 (Al).
Water = 100 − 8.1 − 43.2 = 48.7%: 18m×100/(342 + 18m) = 48.7, so m = 18.
Hydrated sulphate is Al2(SO4)3·18H2O.
Teacher's Note: Metal and sulphate by percentage give E; water is the remainder.
Exam Note: Water percentage is 100 minus metal and sulphate.
Question 75. Find the milli equivalent of: (a) Ca(OH)2 in 74 g. (b) NaOH in 20 g. (c) H2SO4 in 2.45 g.
Solution. (a) Meq of Ca(OH)2 = (74/37) × 1000 = 2000.
(b) Meq of NaOH = (20/40) × 1000 = 500.
(c) Meq of H2SO4 = (2.45/49) × 1000 = 50.
Teacher's Note: Meq = (mass/equivalent mass) × 1000.
Exam Note: Use E = M/2 for Ca(OH)2 and H2SO4.
Question 76. Find the mass of NaOH in its 50 milli equivalents.
Solution. Meq = (w/E) × 1000: 50 = (w/40) × 1000, so w = 2 g.
Teacher's Note: Invert Meq = (w/E) × 1000 with E = 40 for NaOH.
Exam Note: Equivalent mass of NaOH equals its molar mass.
Question 77. Find the normality of H2SO4 having 50 milli equivalents in 2 litre.
Solution. N × V(L) = equivalents: N × 2 = 50/1000, so N = 0.025.
Teacher's Note: Normality = equivalents per litre; convert milli to equivalents.
Exam Note: Divide Meq by 1000 first.
Question 78. 1.2048 g sample of impure Na2CO3 is dissolved and allowed to react with a solution of CaCl2. The resulting CaCO3, after precipitation, filtration and drying was found to mass 1.0362 g. Assuming impurities do not contribute to the mass of precipitate, calculate per cent purity of Na2CO3.
Solution. Na2CO3 + CaCl2 → CaCO3: Meq of Na2CO3 = Meq of CaCO3.
(w/53)×1000 = (1.0362/50)×1000, so w = 1.0984 g.
% purity = 1.0984/1.2048 × 100 = 91.16%.
Teacher's Note: Equal equivalents of carbonate and precipitate link the masses.
Exam Note: Equivalent mass of both carbonates is M/2.
Question 79. Calculate normality and molarity of the following: (a) 0.74 g of Ca(OH)2 in 5 mL of solution. (b) 3.65 g of HCl in 200 mL of solution. (c) 1/10 mole of H2SO4 in 500 mL of solution.
Solution. (a) Eq of Ca(OH)2 = 0.74/37 = 0.02 in 5 mL: N = 4, M = 2.
(b) Eq of HCl = 3.65/36.5 = 0.1 in 200 mL: N = 0.5, M = 0.5.
(c) Eq of H2SO4 = 0.1 × 2 = 0.2 in 500 mL: N = 0.4, M = 0.2.
Teacher's Note: N = M × valency factor; compute equivalents per litre.
Exam Note: Convert mL to L before dividing.
Question 80. Find the mass of H2SO4 in 1200 mL of a solution of 0.2 N strength.
Solution. Meq = N × V(mL) = 0.2 × 1200 = 240; (w/49) × 1000 = 240, so w = 11.76 g.
Teacher's Note: Meq from N × V gives mass via E = 49.
Exam Note: Equivalent mass of H2SO4 is 49.
Question 81. Calculate the mass of calcium oxide required when it reacts with 852 g of P4O10. (IIT 2005)
Solution. 6CaO + P4O10 → 2Ca3(PO4)2. Mole of P4O10 = 852/284 = 3.
Mole of CaO = 6 × 3 = 18; mass = 18 × 56 = 1008 g.
Teacher's Note: Basic oxide with acidic oxide: use the 6 : 1 mole ratio.
Exam Note: Molar mass of P4O10 is 284.
Question 82. What mass of Na2CO3 of 95% purity would be required to neutralize 45.6 mL of 0.235 N acid?
Solution. Meq of Na2CO3 = Meq of acid: (w/53) × 1000 = 45.6 × 0.235, so w = 0.5679 g (pure).
Sample of 95% purity = 0.5679 × 100/95 = 0.5978 g.
Teacher's Note: Find pure mass by equivalents, then correct for purity.
Exam Note: Divide by 0.95 for impure sample.
Question 83. How many millilitre of 0.5 M H2SO4 are needed to dissolve 0.5 g of copper II carbonate? (IIT 1999)
Solution. Meq of H2SO4 = Meq of CuCO3 (E = M/2 = 61.75).
0.5 × 2 × V = 0.5 × 1000/61.75, so V = 8.097 mL.
Teacher's Note: Normality of 0.5 M H2SO4 is 1; equate Meq.
Exam Note: Convert molarity to normality (n-factor 2).
Question 84. What is the strength in g per litre of a solution of H2SO4, 12 mL of which neutralized 15 mL of N/10 NaOH solution?
Solution. Meq of H2SO4 = Meq of NaOH: N × 12 = 15 × 0.1, so N = 0.125.
Strength = N × E = 0.125 × 49 = 6.125 g/L.
Teacher's Note: N1V1 = N2V2, then strength = N × E.
Exam Note: Strength in g/L needs equivalent mass.
Question 85. The formula mass of an acid is 82.0. 100 cm3 of a solution of this acid containing 39.0 g of the acid per litre were completely neutralized by 95.0 cm3 of aqueous NaOH containing 40.0 g of NaOH per litre. What is the basicity of the acid? (Roorkee 2000)
Solution. Normality of NaOH = (40/40) = 1 N. Normality of acid = 39/(82/n) where n is basicity.
Meq: (39n/82) × 100 = 1 × 95, so n = 2. The acid is dibasic.
Teacher's Note: Equate Meq of acid and base; basicity is the n-factor.
Exam Note: Basicity is a whole number.
Question 86. Calculate the normality of the resulting solution made by adding 2 drops (0.1 mL) of 0.1 N H2SO4 in 1 litre of distilled water.
Solution. Meq does not change on dilution: 0.1 × 0.1 = N × 1000, so N = 10-5.
Teacher's Note: Dilution keeps equivalents constant: N1V1 = N2V2.
Exam Note: Ignore the tiny volume added.
Question 87. What volume at NTP of ammonia gas will be required to be passed into 30 mL of N H2SO4 solution to bring down the acid normality to 0.2 N?
Solution. Initial Meq of H2SO4 = 30 × 1 = 30; after NH3, Meq = 30 × 0.2 = 6; lost = 24.
(w/17) × 1000 = 24, so w = 0.408 g NH3.
Volume at NTP = 22.4 × 0.408/17 = 0.5376 L = 537.6 mL.
Teacher's Note: Meq of acid consumed equals Meq of ammonia added.
Exam Note: Ammonia equivalent mass is 17.
Question 88. Two litre of NH3 at 30°C and 0.20 atmosphere is neutralized by 134 mL of a solution of H2SO4. Calculate normality of H2SO4.
Solution. NH3: PV = (w/m)RT, so moles = 0.2×2/(0.0821×303) = 0.01608.
Equivalents of NH3 = 0.01608 = 16.08 Meq. N × 134 = 16.08, so N = 0.12.
Teacher's Note: Find moles from the gas law; for NH3 equivalents equal moles.
Exam Note: Use T = 303 K.
Question 89. One g of calcium was burnt in excess of O2 and the oxide was dissolved in water to make up one litre alkaline solution. Calculate normality of alkaline solution.
Solution. Ca + ½O2 → CaO; 1 g Ca = 1/20 equivalent, so Ca(OH)2 formed = 1/20 eq.
N = (1/20)/1 L = 0.05.
Teacher's Note: Equivalents of Ca(OH)2 equal equivalents of Ca (E = 20).
Exam Note: E of Ca is 20.
Question 90. 1.82 g of a metal required 32.5 mL of N HCl to dissolve it. What is equivalent mass of metal?
Solution. Meq of metal = Meq of HCl: (1.82/E) × 1000 = 32.5 × 1, so E = 56.
Teacher's Note: Equivalents of metal dissolved equal equivalents of acid used.
Exam Note: Meq of acid = N × V(mL).
Question 91. Calculate normality of mixture obtained by mixing: (a) 100 mL of 0.1 N HCl + 50 mL of 0.25 N NaOH. (b) 100 mL of 0.2 M H2SO4 + 200 mL of 0.2 M HCl. (c) 100 mL of 0.2 M H2SO4 + 100 mL of 0.2 M NaOH. (d) 1 g-equivalent of NaOH + 100 mL of 0.1 N HCl.
Solution. (a) Meq HCl = 10; NaOH = 12.5; NaOH left = 2.5 in 150 mL: N = 0.0167 (basic).
(b) Meq H2SO4 = 100×0.2×2 = 40; HCl = 200×0.2 = 40; total 80 in 300 mL: N = 0.267.
(c) H2SO4 40, NaOH 20; left 20 in 200 mL: N = 0.1.
(d) NaOH 1000 Meq, HCl 10 Meq; left 990 in 100 mL: N = 9.9.
Teacher's Note: Subtract equivalents of acid and base, divide by the total volume.
Exam Note: Add volumes of both solutions.
Question 92. In what ratio should you mix 0.2 M NaNO3 and 0.1 M Ca(NO3)2 solution so that in resulting solution, the concentration of -ve ion is 50% greater than the concentration of +ve ion?
Solution. Let V1 mL of 0.2 M NaNO3 and V2 mL of 0.1 M Ca(NO3)2 be mixed.
[NO3-] = (0.2V1 + 0.2V2)/(V1 + V2); [Na+] + [Ca2+] = (0.2V1 + 0.1V2)/(V1 + V2).
Setting [NO3-] = (3/2) × positive ion concentration gives V1 : V2 = 1 : 2.
Teacher's Note: Count nitrate from both salts; 50% greater means a 3/2 ratio.
Exam Note: Ca(NO3)2 contributes two nitrate ions.
Question 93. Calculate the mass of KOH required to neutralize 15 Meq. of the following: (a) HCl, (b) KHSO4, (c) N2O5, (d) CO2.
Solution. 15 Meq of each acid neutralizes 15 Meq KOH: (w/56) × 1000 = 15, so w = 0.84 g in all four cases.
Teacher's Note: Neutralization is equivalent-for-equivalent, whatever the acid.
Exam Note: Same answer for all four parts.
Question 94. What volume of water is required to make 0.20 N solution from 1600 mL of 0.2050 N solution?
Solution. Meq of conc. solution = 1600 × 0.2050 = 328. After dilution to V mL: 0.20 × V = 328, V = 1640 mL.
Water to add = 1640 − 1600 = 40 mL.
Teacher's Note: Meq stays constant on dilution.
Exam Note: Report volume of water added, not final volume.
Question 95. How much BaCl2·2H2O and pure water are to be mixed to prepare 50 g of 12.0% (by mass) BaCl2 solution?
Solution. For 50 g of 12% solution BaCl2 = 6 g.
BaCl2·2H2O needed = 6 × 244/208 = 7.038 g.
Water = 50 − 7.038 = 42.962 g.
Teacher's Note: Convert anhydrous mass to hydrate mass using 244/208.
Exam Note: Water of hydration counts in the solute mass.
Question 96. What volume of a solution of hydrochloric acid containing 73 g of acid per litre would suffice for the exact neutralization of sodium hydroxide obtained by allowing 0.46 g of metallic sodium to act upon water?
Solution. Na + H2O → NaOH + ½H2; NaOH + HCl → NaCl + H2O.
Meq of Na = Meq of HCl: (0.46/23) × 1000 = (73/36.5) × V, so V = 10 mL.
Teacher's Note: Equivalents of Na, NaOH and HCl are all equal.
Exam Note: Strength 73 g/L means 2 N HCl.
Question 97. 20 mL of 0.2 M Al2(SO4)3 is mixed with 20 mL of 0.6 M BaCl2. Calculate the concentration of each ion in solution.
Solution. Al2(SO4)3 Meq = 20×0.2×6 = 24; BaCl2 Meq = 20×0.6×2 = 24 (BaSO4 precipitates fully).
Total volume 40 mL: [Al3+] = 0.2 M, [Cl-] = 0.6 M; no Ba2+ or SO42- remain.
Teacher's Note: Both react exactly; only Al3+ and Cl- remain.
Exam Note: Add the volumes after mixing.
Question 98. Find equivalent mass of H3PO4 in the reaction. Ca(OH)2 + H3PO4 → CaHPO4 + 2H2O
Solution. Two H atoms of H3PO4 are replaced, so basicity = 2 and equivalent mass = 98/2 = 49.
Teacher's Note: Equivalent mass depends on the H atoms actually replaced.
Exam Note: Same acid has different E in different reactions.
Question 99. What volume of 0.20 M H2SO4 is required to produce 34.0 g of H2S by the reaction? 8KI + 5H2SO4 → 4K2SO4 + 4I2 + H2S + 4H2O
Solution. 34 g H2S = 1 mol, requiring 5 mol H2SO4. 0.20 × V = 5, so V = 25 L.
Teacher's Note: Use mole ratio from the balanced redox equation.
Exam Note: Use the 5 : 1 mole ratio from the equation.
Question 100. How much AgCl will be formed by adding 200 mL of 5 N HCl to a solution containing 1.7 g AgNO3?
Solution. AgNO3 Meq = (1.7/170) × 1000 = 10; HCl Meq = 200 × 5 = 1000.
AgCl formed = 10 Meq: (w/143.5) × 1000 = 10, so w = 1.435 g.
Teacher's Note: AgNO3 is the limiting reagent.
Exam Note: HCl is in large excess.
Question 101. What mass of AgCl will be precipitated when a solution containing 4.77 g NaCl is added to a solution of 5.77 g of AgNO3?
Solution. AgNO3 Meq = (5.77/170) × 1000 = 33.94; NaCl Meq = (4.77/58.5) × 1000 = 81.54.
AgCl = 33.94 Meq: (w/143.5) × 1000 = 33.94, so w = 4.87 g.
Teacher's Note: Limiting reagent (AgNO3) decides the precipitate.
Exam Note: Compare Meq, not masses.
Question 102. How much BaCl2 would be needed to make 250 mL of a solution having same concentration of Cl- as the one containing 3.78 g of NaCl per 100 mL?
Solution. N of NaCl solution = 3.78/(58.5 × 0.1) = 0.646.
Let w g BaCl2 in 250 mL: N = (w/104)(1000/250) = 0.0385w.
Equal Cl- concentration: 0.646 = 0.0385w, so w = 16.80 g.
Teacher's Note: Equal [Cl-] means equal normality for these chlorides.
Exam Note: Equivalent mass of BaCl2 is 104.
Question 103. Upon mixing 45.0 mL of 0.25 M lead nitrate solution with 25 mL of 0.10 M chromic sulphate, precipitation of lead sulphate takes place. How many mole of lead sulphate are formed? Also calculate the molar concentrations of the species left behind in final solution. Assume that lead sulphate is completely insoluble. (IIT 1993)
Solution. 3Pb(NO3)2 + Cr2(SO4)3 → 3PbSO4 + 2Cr(NO3)3. Meq Pb(NO3)2 = 45×0.25×2 = 22.5; Cr2(SO4)3 = 25×0.1×6 = 15.
PbSO4 = 15 Meq = 7.5 mmol = 0.0075 mol.
Total volume 70 mL: [Pb2+] = 7.5/(70×2) = 0.0536 M; [NO3-] = 22.5/70 = 0.32 M; [Cr3+] = 15/(70×3) = 0.0714 M.
Teacher's Note: Sulphate is limiting; leftover Pb2+ remains with nitrate and chromium ions.
Exam Note: Convert Meq to molarity by dividing by valency.
Question 104. What is the normality and nature of a mixture obtained by mixing 0.62 g of Na2CO3·H2O to 100 mL of 0.1 N H2SO4?
Solution. Meq of Na2CO3·H2O = (0.62/62) × 1000 = 10; Meq of H2SO4 = 100 × 0.1 = 10.
Na2CO3 + H2SO4 → Na2SO4 + H2O + CO2: all reacts, leaving Na2SO4 10 Meq in 100 mL.
N = 0.1; the solution is neutral (Na2SO4 is not hydrolysed).
Teacher's Note: Equal Meq of acid and carbonate leaves only a neutral salt.
Exam Note: Equivalent mass of the monohydrate is 62.
Question 105. A sample of an alloy weighing 0.50 g and containing 90% Ag was dissolved in conc. HNO3. Ag was analysed by Volhard method in which 25 mL of KCNS were required for complete neutralization. Determine normality of KCNS.
Solution. Mass of Ag = 0.5 × 90/100 = 0.45 g; Meq = (0.45/108) × 1000 = 4.17.
Volhard: Ag → AgNO3 → AgCNS, so Meq of KCNS = Meq of Ag: N × 25 = 4.17, N = 0.167.
Teacher's Note: Equivalents of KCNS equal equivalents of silver.
Exam Note: Use 90% of 0.50 g for silver.
Question 106. What is the purity of conc. H2SO4 solution (specific gravity 1.8 g/mL), if 5.0 mL of this solution is neutralized by 84.6 mL of 2.0 N NaOH?
Solution. Meq of H2SO4 = Meq of NaOH: N × 5 = 84.6 × 2, so N = 33.84.
Mass of H2SO4 per mL = 33.84×49/1000 = 1.658 g.
Purity = 1.658/1.8 × 100 = 92.12%.
Teacher's Note: Density times purity equals mass of acid per mL.
Exam Note: Use specific gravity 1.8 for the solution mass.
Question 107. A sample of H2SO4 (density 1.787 g mL-1) is labeled as 86% by mass. What is molarity of acid? What volume of acid has to be used to make 1 litre of 0.2 M H2SO4?
Solution. 86 g H2SO4 in 100 g solution; volume = 100/1.787 mL. M = 86/(98 × 100/(1.787×1000)) = 15.68.
V × 15.68 = 1000 × 0.2, so V = 12.75 mL.
Teacher's Note: Molarity from percentage and density; then M1V1 = M2V2.
Exam Note: Volume = mass/density.
Question 108. A piece of Al weighing 2.7 g is titrated with 75.0 mL of H2SO4 (sp. gr. 1.18 g mL-1 and 24.7% H2SO4 by mass). After the metal is completely dissolved, the solution is diluted to 400 mL. Calculate molarity of free H2SO4 in solution.
Solution. Eq of Al = 2.7/9 = 0.3, so Meq = 300. N of H2SO4 = 24.7/(49 × 100/(1.18×1000)) = 5.95.
Meq in 75 mL = 5.95 × 75 = 446.25; left = 446.25 − 300 = 146.25.
N = 146.25/400 = 0.367, so M = 0.183.
Teacher's Note: Meq of acid minus Meq of metal dissolved, divided by final volume.
Exam Note: Convert N to M by dividing by 2.
Question 109. A 6.90 M solution of KOH in water has 30% by mass of KOH. Calculate density of solution.
Solution. 30 g KOH in 100 g solution (volume 100/d mL): 6.90 = 30/(56 × 100/(1000d)), so d = 1.288 g mL-1.
Teacher's Note: Use molarity = mass per litre/molar mass; solve for density.
Exam Note: Density is of the whole solution.
Question 110. Mole fraction of I2 in C6H6 is 0.2. Calculate molality of I2 in C6H6.
Solution. n/(n + N) = 0.2 and N/(n + N) = 0.8, so n/N = 1/4.
n × 1000/WC6H6 = 1000/(4 × 78): molality = 3.205 mol kg-1.
Teacher's Note: Mole ratio of solute to solvent converts to molality via benzene's 78 g/mol.
Exam Note: Molality uses kg of solvent.
Question 111. A drop (0.05 mL) of 12 M HCl is spread over a thin sheet of aluminium foil (thickness 0.10 mm and density of Al = 2.70 g/mL). Assuming whole of the HCl is used to dissolve Al, what will be the maximum area of hole produced in foil?
Solution. Meq of Al = Meq of HCl = 12 × 0.05 = 0.6; mass of Al = 0.6 × 9/1000 = 0.0054 g.
Volume of Al = 0.0054/2.7 = 0.002 cm3; area = 0.002/0.01 = 0.2 cm2 (thickness 0.01 cm).
Teacher's Note: HCl equivalents give mass of Al dissolved, then volume and area.
Exam Note: Convert 0.10 mm to 0.01 cm.
Question 112. Calculate the volume of NH3 in a solution (density 0.99 g/cm3 and 2.3% by mass) which will be required to precipitate Fe(OH)3 from a sample of 0.70 g of 25% Fe2O3 purity.
Solution. Mass of Fe2O3 = 0.70 × 25/100 = 0.175 g = 1.094×10-3 mol, so Fe3+ = 2.1875×10-3 mol = 6.5625×10-3 eq.
Normality of NH3(aq) = 2.3×0.99×1000/(17×100) = 1.34.
Eq of NH3 = eq of Fe3+: 1.34 × V = 6.5625×10-3, so V = 4.9 mL.
Teacher's Note: Equivalents of ammonia equal equivalents of Fe3+ precipitated as Fe(OH)3.
Exam Note: Fe3+ carries three equivalents per mole.
Question 113. Calculate molality of 1 litre solution of 93% H2SO4 by volume. The density of solution is 1.84 g mL-1. (IIT 1990)
Solution. 93 g H2SO4 in 100 mL; mass of solution = 100 × 1.84 = 184 g; water = 184 − 93 = 91 g.
Molality = (93/98)/(91/1000) = 10.43 mol kg-1.
Teacher's Note: Use density to find solution mass, subtract solute for solvent mass.
Exam Note: 93% by volume means 93 g in 100 mL.
Question 114. The gases produced when 18 g carbon reacts with 5 litre of oxygen at 18°C and 5 atm pressure are treated with 0.5 litre of 2 M NaOH. Calculate the concentration of sodium carbonate and sodium bicarbonate produced by the reaction of CO2 with NaOH. CO has no reaction under these conditions.
Solution. C + ½O2 → CO (a mol C); C + O2 → CO2 (b mol C). a + b = 18/12 = 1.5.
O2 used = a/2 + b = PV/RT = 5×5/(0.0821×291) = 1.046; so a = 0.908, b = 0.592 mol CO2.
NaOH = 1000 mmol, CO2 = 592 mmol. 2NaOH + CO2 → Na2CO3 uses 500 mmol CO2, giving 500 mmol Na2CO3; 92 mmol CO2 left.
Na2CO3 + CO2 + H2O → 2NaHCO3: Na2CO3 left 408, NaHCO3 184 mmol.
In 500 mL: [Na2CO3] = 0.816 M, [NaHCO3] = 0.368 M.
Teacher's Note: Find CO2 from carbon and oxygen balance, then neutralise stepwise.
Exam Note: Excess CO2 converts carbonate into bicarbonate.
Question 115. What would be the molality of a solution obtained by mixing equal volumes of 30% by mass H2SO4 (d = 1.218 g mL-1) and 70% by mass H2SO4 (d = 1.610 g mL-1)? If the resulting solution has density 1.425 g/mL, calculate its molarity.
Solution. For V mL of each: H2SO4 = 30×V×1.218/100 + 70×V×1.610/100 = 1.4924V g; total solution mass = V(1.218 + 1.610) = 2.828V g; water = 1.3356V g.
Molality = (1.4924/98)/(1.3356×10-3) = 11.40 mol kg-1.
Corrected: with density 1.425 g/mL, volume of mixture = 2.828V/1.425 = 1.9846V mL, so molarity = (1.4924/98)/(1.9846×10-3) = 7.67 M. (The book assumed a volume of 2V and printed 7.61 M and 11.22 m.)
Teacher's Note: Add masses of acid and solution; use the given density only for final volume.
Exam Note: Volumes are not additive; use density.
Question 116. Calculate molarity of water, if its density is 1000 kg/m3. (IIT 2003)
Solution. 1 L water = 10-3 m3 = 1000 mL; mass = 103 g.
Mole = 1000/18; molarity = 55.6 M.
Teacher's Note: Molarity of pure water is moles in one litre.
Exam Note: Density 1000 kg m-3 = 1 g mL-1.
Question 117. To 50 litre of 0.2 N NaOH, 5 litre of 1 N HCl and 15 litre of 0.1 N FeCl3 solution are added. What mass of Fe2O3 can be obtained from the precipitate? Also report normality of NaOH left in the resultant solution.
Solution. Eq of NaOH = 50×0.2 = 10; eq of HCl = 5; NaOH left = 5.
FeCl3 = 15×0.1 = 1.5 eq; Fe(OH)3 forms using 1.5 eq NaOH; NaOH left = 3.5 eq.
Total volume = 70 L: NNaOH = 3.5/70 = 0.05 N.
Fe2O3 = 1.5 eq: w/(160/6) = 1.5, so w = 40 g.
Teacher's Note: Neutralise HCl first, then precipitate Fe(OH)3 with the remaining NaOH.
Exam Note: Equivalent mass of Fe2O3 is 160/6.
Question 118. The molar mass of an organic acid was determined by the study of its barium salt. 4.290 g of salt was quantitatively converted to free acid by the reaction with 21.64 mL of 0.477 M H2SO4. The barium salt was found to have two mole of water of hydration per Ba2+ ion and the acid is monobasic. What is the molar mass of anhydrous acid?
Solution. Meq of salt = Meq of acid: (4.290/(M/2)) × 1000 = 21.64 × 0.477 × 2, so molar mass of salt = 415.61.
Salt = Ba2+ + 2 anion + 2H2O: molar mass of anion = (415.61 − 137 − 36)/2 = 121.31.
Molar mass of acid = 121.31 + 1 = 122.31.
Teacher's Note: Equate equivalents of barium salt and H2SO4; subtract Ba and water.
Exam Note: Monobasic acid: add one H to anion.
Question 119. A solution is 0.5 M in MgSO4, 0.1 M in AlCl3 and 0.2 M in (NH4)2SO4. What is the total ionic strength?
Solution. Ionic strength μ = ½ΣcZ2.
μ = ½[0.5×22 + 0.5×22 + 0.1×32 + 0.3×12 + 0.4×12 + 0.2×22] = 3.2.
Teacher's Note: List every ion with its concentration, including sulphate from two salts.
Exam Note: Count each ion's concentration with valency squared.
Question 120. What volume of 0.010 M NaOH (aq.) is required to react completely with 30 g of an aqueous acetic acid solution in which mole fraction of acetic acid is 0.15?
Solution. nAA/(nAA + nH2O) = 0.15, so nAA/nH2O = 15/85, giving wAA/wH2O = (15×60)/(85×18) = 0.588.
wAA + wH2O = 30, so wAA = 11.11 g.
Meq of acetic acid = (11.11/60) × 1000 = 0.01 × V, so V = 18518 mL ≈ 18.5 L (book rounds to 18.55 L).
Teacher's Note: Mole fraction gives mass of acetic acid in 30 g; then Meq equals NaOH Meq.
Exam Note: Acetic acid is monobasic, E = 60.
Question 121. A solution contains 1 mol of total amount of solute and solvent. The mole fraction of solute being X1 and that of solvent X2: (a) prove X1 = M M2 / [ρ + M(M2 − M1)] where M1 and M2 are molar masses of solute and solvent respectively and M is molarity of solution; ρ is density of solution in g/dm3. (b) prove M = X1ρ / M2 for dilute solution; ρ is density of solvent.
Solution. Let n1 mol solute and n2 mol solvent: n1 + n2 = 1, so n1 = X1, n2 = X2.
(a) Mass of solution = X1M1 + X2M2, volume = (X1M1 + X2M2)/ρ litre. Molarity M = X1ρ/(X1M1 + X2M2).
So MX1M1 + MM2(1 − X1) = X1ρ, i.e. X1(ρ − MM1 + MM2) = MM2, giving X1 = MM2/[ρ + M(M2 − M1)].
(b) For a dilute solution X1M1 ≪ X2M2, X2 → 1 and ρsolution ≈ ρsolvent; so M = X1ρ/M2.
Teacher's Note: Take one mole of solution, so moles equal mole fractions; build molarity from mass and density.
Exam Note: Dilute limit: X2 ≈ 1 simplifies the result.
Question 122. A mixture of Al and Zn weighing 1.67 g was completely dissolved in acid and evolved 1.69 litre of H2 at NTP. What was the mass of Al in original mixture?
Solution. Let masses of Al and Zn be a and b g: a + b = 1.67. Al gives (3/2)(22.4)a/27 L H2; Zn gives 22.4b/65 L.
(3×22.4×a)/(2×27) + 22.4b/65 = 1.69.
Solving: Corrected: a = 1.24 g Al, b = 0.43 g Zn (the book printed 1.25 g and 0.42 g; these do not satisfy the H2 volume exactly).
Teacher's Note: Two metals, two equations: total mass and total hydrogen volume.
Exam Note: Al gives 1.5 mol H2 per mole; Zn gives 1.
Question 123. A mixture of HCOOH and H2C2O4 is heated with conc. H2SO4. The gas produced is collected and on treating with KOH solution the volume of the gas decreases by 1/6 th. Calculate molar ratio of two acids in original mixture. (Roorkee 1990)
Solution. HCOOH → H2O + CO; H2C2O4 → H2O + CO + CO2.
Let a mol HCOOH and b mol H2C2O4: CO = a + b, CO2 = b; total gas = a + 2b.
KOH absorbs CO2: b = (a + 2b)/6, so a/b = 4. Ratio HCOOH : H2C2O4 = 4 : 1.
Teacher's Note: Only oxalic acid gives CO2; its share is one sixth of the gas.
Exam Note: KOH removes CO2, not CO.
Question 124. A sample of Mg was burnt in air to give a mixture of MgO and Mg3N2. The ash was dissolved in 60 Meq. of HCl and the resulting solution was back titrated with NaOH. 12 Meq. of NaOH were required to reach the end point. An excess of NaOH was then added and the solution distilled. The ammonia released was then trapped in 10 Meq. of second acid solution. Back titration of this solution required 6 Meq. of the base. Calculate the percentage of Mg burnt to the nitride. (Roorkee 1998)
Solution. Let a and b mmol of Mg form MgO and Mg3N2: ash holds a mmol MgO and b/3 mmol Mg3N2.
HCl used = 60 − 12 = 48 Meq: 2a + 8b/3 = 48 …(1).
NH3 from nitride = 2b/3 mmol absorbs (10 − 6) = 4 Meq acid: 2b/3 = 4, so b = 6 …(2).
From (1): a = 16. % Mg as nitride = 6/(6 + 16) × 100 = 27.27%.
Teacher's Note: Back titrations give HCl consumed by ash and NH3 released.
Exam Note: Mg3N2 consumes 8 HCl per formula unit.
Question 125. For the reaction, N2O5(g) ⇌ 2NO2(g) + 0.5O2(g), calculate the mole fraction of N2O5(g) decomposed at a constant volume and temperature, if the initial pressure is 600 mm Hg and the pressure at any time is 960 mm Hg. Assume ideal gas behaviour.
Solution. N2O5 ⇌ 2NO2 + ½O2: if pressure P decomposes, final = (600 − P) + 2P + P/2 = 960, so P = 240 mm Hg.
Mole fraction decomposed = 240/600 = 0.4.
Teacher's Note: At constant V and T, pressure is proportional to moles.
Exam Note: Total moles rise by 1.5 per mole decomposed.
Question 126. A gas mixture of 3 litre of propane (C3H8) and butane (C4H10) on complete combustion at 25°C produced 10 litre CO2. Find out the composition of gas mixture.
Solution. C3H8 + 5O2 → 3CO2 + 4H2O; C4H10 + (13/2)O2 → 4CO2 + 5H2O.
a + b = 3 and 3a + 4b = 10, so b = 1: propane 2 L, butane 1 L.
Teacher's Note: Total volume and CO2 volume give two equations.
Exam Note: Water is liquid at 25°C; ignore it.
Question 127. 8.0575×10-2 kg of Glauber's salt is dissolved in water to obtain 1 dm3 of a solution of density 1077.2 kg m-3. Calculate the molarity, molality and mole fraction of Na2SO4 in solution. (IIT 1994)
Solution. Glauber's salt Na2SO4·10H2O (M = 322). Na2SO4 in 80.575 g = 142×80.575/322 = 35.533 g = 0.2502 mol.
Molarity = 0.2502 M (1 dm3).
Mass of solution = 1077.2 g; water = 1077.2 − 35.533 = 1041.667 g. Molality = 0.2502/1.0417 = 0.24 m.
Mole of water = 1041.667/18 = 57.87; mole fraction = 0.2502/(0.2502 + 57.87) = 4.3×10-3.
Teacher's Note: Hydrate water joins the solvent; solvent mass = solution minus anhydrous solute.
Exam Note: Use anhydrous Na2SO4 for solute mass.
Question 128. A solid mixture 5 g consists of lead nitrate and sodium nitrate was heated below 600°C until mass of residue was constant. If the loss in mass is 28%, find the mass of lead nitrate and sodium nitrate in mixture. (IIT 1990)
Solution. Pb(NO3)2 → PbO + 2NO2 + ½O2 (331 → 223); NaNO3 → NaNO2 + ½O2 (85 → 69).
a + b = 5; residue = 5 − 1.4 = 3.6 g: 223a/331 + 69b/85 = 3.6.
Solving: Pb(NO3)2 = 3.32 g, NaNO3 = 1.68 g.
Teacher's Note: Both salts lose mass; residue is PbO plus NaNO2.
Exam Note: 28% loss on 5 g is 1.4 g.
Question 129. A mixture of ethane (C2H6) and ethene (C2H4) occupies 40 litre at 1.00 atm and at 400 K. The mixture reacts completely with 130 g of O2 to produce CO2 and H2O. Assuming ideal gas behaviour, calculate the mole fractions of C2H4 and C2H6 in the mixture. (IIT 1995)
Solution. PV = nRT: 1×40 = n×0.082×400, n = 1.2195 mol; a + b = 1.2195 (a = C2H6, b = C2H4).
O2 needed = 7a/2 + 3b = 130/32 …(2). Solving: a = 0.808, b = 0.4115.
Mole fraction C2H6 = 0.66, C2H4 = 0.34.
Teacher's Note: Gas law gives total moles; oxygen demand gives the second equation.
Exam Note: Ethane needs 3.5 O2; ethene needs 3.
Question 130. A sample of hard water contains 96 ppm of SO42- and 183 ppm of HCO3-, with Ca2+ as the only cation. How many mole of CaO will be required to remove HCO3- from 1000 kg of this water? If 1000 kg of this water is treated with the mass of CaO calculated above, what will be the concentration (in ppm) of residual Ca2+ ions? (Assume CaCO3 to be completely insoluble in water.) If the Ca2+ ions in one litre of the treated water are completely exchanged with hydrogen ions, what will be its pH? (One ppm means one part of the substance in one million part of water, mass/mass.) (IIT May 1997)
Solution. In 106 g water: 183 g HCO3- = 3 mol, i.e. 1.5 mol Ca(HCO3)2 (243 g, 60 g Ca2+); 96 g SO42- = 1 mol as CaSO4 (40 g Ca2+).
Ca(HCO3)2 + CaO → 2CaCO3 + H2O: CaO needed = 1.5 mol.
Residual Ca2+ is that of CaSO4: 40 ppm.
One litre of treated water has 40×10-3 g Ca2+ = 10-3 mol. Exchange with H+ gives [H+] = 2×10-3, so pH = −log(2×10-3) = 2.6989.
Teacher's Note: Lime removes only temporary hardness; calcium sulphate remains.
Exam Note: One Ca2+ exchanges with two H+.
Question 131. 1.20 g sample of Na2CO3 and K2CO3 was dissolved in water to form 100 mL of a solution. 20 mL of this solution required 40 mL of 0.1 N HCl for complete neutralization. Calculate the mass of Na2CO3 in mixture. If another 20 mL of this solution is treated with excess of BaCl2, what will be the mass of precipitate? (Roorkee 1997)
Solution. Let Na2CO3 = a g, K2CO3 = b g: a + b = 1.20 …(1).
Whole 100 mL has Meq = 40×0.1×100/20 = 20: a/53 + b/69 = 20/1000, i.e. 69a + 53b = 73.14 …(2).
Solving: a = 0.5962 g Na2CO3, b = 0.6038 g.
20 mL aliquot has Meq = 4 = Meq of BaCO3: (w/(197/2)) × 1000 = 4, so w = 0.394 g BaCO3.
Teacher's Note: Total equivalents of the two carbonates equal HCl equivalents.
Exam Note: Scale the 20 mL aliquot to 100 mL.
Question 132. 25 mL of a solution of Na2CO3 having a specific gravity of 1.25 g mL-1 required 32.9 mL of a solution of HCl containing 109.5 g of the acid per litre for complete neutralization. Calculate the volume of 0.84 N H2SO4 that will be completely neutralized by 125 g of Na2CO3 solution.
Solution. NHCl = 109.5/36.5 = 3. For Na2CO3: N × 25 = 32.9 × 3, so N = 3.948.
125 g solution = 125/1.25 = 100 mL: Meq = 100 × 3.948 = 394.8.
0.84 × V = 394.8, so V = 470 mL.
Teacher's Note: Find the normality of the carbonate, then equate Meq with H2SO4.
Exam Note: Solution mass 125 g must be converted to volume.
Question 133. 200 mL of a M solution of HCl is mixed with 500 mL of b M solution of HCl. The mixture is diluted to 2 litre to obtain the solution of molarity 1.5 M. If a : b :: 5 : 4, what are the values of a and b?
Solution. Mmol of HCl = 200a + 500b; after dilution to 2000 mL: 1.5 = (200a + 500b)/2000.
With a/b = 5/4: 3000 = 250b + 500b, so b = 4 and a = 5.
Teacher's Note: Millimoles are conserved on mixing and dilution.
Exam Note: Substitute a = 5b/4 to get one equation.
Question 134. Calculate the % of free SO3 in oleum that is labelled as 106%.
Solution. H2O + SO3 → H2SO4: 18 g water reacts with 80 g SO3.
Oleum 106% means 100 g oleum absorbs 6 g water: free SO3 = 80×6/18 = 26.67%.
Teacher's Note: A label above 100% gives the water needed to turn all oleum to H2SO4.
Exam Note: 106% means 6 g extra mass per 100 g.
Single Integer Answer Problems
Single Integer Question 1. The number of mole of N2O4 in 276 g N2O4 are ……
Solution. Molar mass of N2O4 = 92; moles = 276/92 = 3.
Teacher's Note: Mole = mass divided by molar mass.
Exam Note: Check molar mass of N2O4 is 92.
Single Integer Question 2. 10 mL of 'a' M solution of HCl is mixed with 40 mL of 1 M HCl to produce a mixture of 2 M. The value of a is ……
Solution. Millimoles are conserved: 10a + 40×1 = 2 × 50, so a = 6.
Teacher's Note: Mix by millimoles; volumes add.
Exam Note: Total volume is 50 mL.
Single Integer Question 3. Molar ratio in a mixture of water and absolute alcohol is 0.2. The mole fraction ratio of alcohol and water is ……
Solution. Water : alcohol = 0.2 : 1, so alcohol : water = 1/0.2 = 5.
Teacher's Note: Mole fraction ratio equals mole ratio.
Exam Note: Invert the given ratio.
Single Integer Question 4. 6 g of H2 reacts with 14 g N2 to form NH3 till the reaction completely consumes the limiting reagent. The mass of other reactant (in g) left is ……
Solution. N2 = 14/28 = 0.5 mol is limiting; it needs 1.5 mol H2 = 3 g. H2 left = 6 − 3 = 3 g.
Teacher's Note: Find limiting reagent by moles before computing leftover.
Exam Note: N2 + 3H2 → 2NH3 ratio decides.
Single Integer Question 5. 1 g of titanium (atomic mass 48) reacts with Cl2 to give 3.21875 g compound. The valence of titanium is ……
Solution. Cl combined = 2.21875 g = 0.0625 mol; Ti = 1/48 = 0.02083 mol. Ratio Cl : Ti = 3, so formula TiCl3; valence = 3.
Teacher's Note: Mass difference gives chlorine; mole ratio gives formula.
Exam Note: Valence equals Cl atoms per Ti.
Single Integer Question 6. A reaction requires two atoms of P for five atoms of O. The amount in g of O2 required for 3.10 g P is ……
Solution. Compound P2O5. P = 3.10/31 = 0.1 mol, O atoms = 0.25 mol = 4 g, so O2 = 4 g.
Teacher's Note: Atom ratio 2 : 5 gives P2O5 stoichiometry.
Exam Note: Convert O atoms to mass using 16.
Single Integer Question 7. A mixture of C2H4 and H2 (in excess) has a pressure of 60 cm Hg. The mixture on passing over Ni catalyst gives C2H6: C2H4(g) + H2(g) → C2H6(g). The resultant pressure of mixture after completion of reaction at same T and V is 40 cm Hg. The ratio of mole fraction of H2 and C2H4 in original mixture is ……
Solution. Pressure falls by 20 cm Hg, equal to the C2H4 reacted (limiting), so p(C2H4) = 20 and p(H2) = 40. Ratio = 40/20 = 2.
Teacher's Note: Pressure drop equals moles of the limiting alkene.
Exam Note: At constant V and T, p is proportional to moles.
Single Integer Question 8. Haemoglobin contains 0.25% iron by mass. The molar mass of haemoglobin is 89600. Number of iron atoms present in one mole of haemoglobin are ……
Solution. Fe per mole = 0.25×89600/100 = 224 g = 224/56 = 4 g-atoms.
Teacher's Note: Same as numerical problem 30.
Exam Note: Divide by 56.
Single Integer Question 9. A gaseous alkane CnH2n+2 is exploded with O2. The volume of O2 required for complete combustion to CO2 formed is in the ratio 7 : 4. The value of n is ……
Solution. [n + (n+1)/2]/n = 7/4 gives 12n + 4 = 14n, so n = 2 (ethane).
Teacher's Note: Write combustion in general form and equate the ratio.
Exam Note: Same as numerical problem 55.
Single Integer Question 10. Compound S4N4 decomposes completely into Sx(g) and N2(g). If all measurements are made at same P and T each volume of S4N4 gives 4.0 volume of gaseous product. The value of x is ……
Solution. S4N4 → (4/x)Sx + 2N2. Volume of product = 4/x + 2 = 4, so x = 2.
Teacher's Note: Balance S and N; total moles of gas equal total volume.
Exam Note: Gas volume ratio equals mole ratio.
Single Integer Question 11. 0.98 g of a polybasic acid (molar mass 98) requires 30 mL of 0.5 M Ba(OH)2 for complete neutralisation. The basicity of acid is ……
Solution. Acid = 0.01 mol (10 mmol). Ba(OH)2 = 15 mmol = 30 meq. Meq of acid = 10n = 30, so basicity n = 3.
Teacher's Note: Equate meq of acid and base; n is basicity.
Exam Note: Ba(OH)2 gives two equivalents per mole.
Single Integer Question 12. A solution of H2O2 has normality N/1.7. Its % strength is ……
Solution. Strength = N × E = (N/1.7)×17 where N = 1; strength = 10 g/L, so % strength = 1% (mass/volume).
Teacher's Note: Strength = normality × equivalent mass (17).
Exam Note: Equivalent mass of H2O2 is 17.
Single Integer Question 13. Number of water molecules attached on Cu2+ ion in CuSO4·5H2O is ……
Solution. Four water molecules are coordinated to Cu2+; the fifth is hydrogen-bonded to sulphate. Answer: 4.
Teacher's Note: Structure [Cu(H2O)4]SO4·H2O.
Exam Note: Fifth water is held by H-bonding.
Single Integer Question 14. Number of water molecules present in Mohr's salt is ……
Solution. Mohr's salt is FeSO4·(NH4)2SO4·6H2O, so 6.
Teacher's Note: Recall formula of Mohr's salt.
Exam Note: Write the full formula first.
Single Integer Question 15. 'n' factor for potash alum is ……
Solution. Potash alum K2SO4·Al2(SO4)3·24H2O: total charge on cations = 2 + 6 = 8.
Teacher's Note: Valency factor of an ionic compound is total positive charge.
Exam Note: Add charges of K+ and Al3+ ions.
Single Integer Question 16. 100 mL solution of an acid (molar mass 82) containing 39 g acid per litre was completely neutralised by 95.0 mL of aqueous NaOH solution containing 40 g NaOH per litre. The basicity of acid is ……
Solution. N of NaOH = 1. 39n/82 × 100 = 1×95, so n = 1.99, i.e. 2.
Teacher's Note: Same as numerical problem 85.
Exam Note: Basicity must be an integer.
Single Integer Question 17. The acidity of acid salt BaHPO4 is ……
Solution. BaHPO4 is neutralised with Ba(OH)2, whose cation has charge 2: acidity = 2.
Teacher's Note: Acidity of the base furnishing Ba2+ is 2.
Exam Note: Count OH groups of the parent base.
Single Integer Question 18. The basicity of acid salt BaHPO4 is ……
Solution. Number of replaceable H atoms in HPO42- is one, so basicity = 1.
Teacher's Note: Only one H atom remains replaceable.
Exam Note: Basicity counts H atoms still replaceable.
Single Integer Question 19. 3 mole of BaCl2 are mixed with 5 mole of Na3PO4 in 1000 mL water. The maximum number of mole of Ba3(PO4)2 formed are ……
Solution. 3BaCl2 + 2Na3PO4 → Ba3(PO4)2 + 6NaCl. BaCl2 is limiting: 3 mol gives 1 mol.
Teacher's Note: Limiting reagent controls the precipitate.
Exam Note: 3 mol BaCl2 gives one mole product.
Single Integer Question 20. A gaseous alkane CnH2n+2 is exploded with oxygen. The volume of oxygen for complete combustion to CO2 formed is in the ratio of 7 : 4. The value of n is ……
Solution. [n + (n+1)/2]/n = 7/4, so n = 2.
Teacher's Note: Same as Q9; ethane.
Exam Note: O2 : CO2 = (3n+1)/2n.
Single Integer Question 21. In what volume ratio 0.1 M Ca(NO3)2 and 0.2 M NaNO3 solutions should be mixed, so that the concentration of negative ion is 50% greater than the concentration of +ve ions? (Ratio VCa(NO3)2 : VNaNO3)
Solution. With V1 of Ca(NO3)2 and V2 of NaNO3: [NO3-] ∝ 0.2V1 + 0.2V2; [+ve] ∝ 0.1V1 + 0.2V2. Setting 0.2V1 + 0.2V2 = 1.5(0.1V1 + 0.2V2) gives V1/V2 = 2.
Teacher's Note: Count ions from both salts and use the 3 : 2 ratio.
Exam Note: Assumed ratio as Ca(NO3)2 : NaNO3.
Single Integer Question 22. The molality of 49% by volume of H2SO4 solution having density 1.49 g/mL is ……
Solution. 49 g H2SO4 (0.5 mol) in 100 mL; solution mass = 149 g; water = 100 g. Molality = 0.5/0.100 = 5.
Teacher's Note: Density gives solution mass; subtract solute for water.
Exam Note: 49% by volume means 49 g per 100 mL.
Single Integer Question 23. The ratio of mole of H2 and CH4 in a mixture having equal mass of both is ……
Solution. Moles ∝ 1/molar mass: (1/2)/(1/16) = 8.
Teacher's Note: Equal masses give inverse molar mass ratio.
Exam Note: Divide equal mass by each molar mass.
Single Integer Question 24. A mixture of C2H4 and excess of H2 has a pressure of 60 cm Hg. The mixture on passing over catalyst forms ethane. The pressure of resultant mixture under identical conditions is 40 cm of Hg. The mole ratio of H2 and C2H4 in the mixture is ……
Solution. Pressure falls by 20 = p(C2H4); p(H2) = 40. Ratio = 2.
Teacher's Note: Same method as Q7.
Exam Note: Pressure fall equals alkene present.
Single Integer Question 25. Two acid solutions A and B are titrated separately each with 25 mL of 1 N Na2CO3 solution. The volume of each acid used for titration is 10 mL and 40 mL respectively for the complete neutralisation. The volume ratio of VB and VA which is mixed to prepare one mL 1 N solution is ……
Solution. NA = 25/10 = 2.5; NB = 25/40 = 0.625. For 1 N mixture: 2.5VA + 0.625VB = VA + VB, so 1.5VA = 0.375VB and VB/VA = 4.
Teacher's Note: Find each acid's normality, then mix by equivalents.
Exam Note: Equivalents are additive on mixing.
Single Integer Question 26. The oxidation of toluene with KMnO4 gives potassium benzoate yield of 76.66%. The amount to closest integer value of toluene to obtain 12 g potassium benzoate required is ……
Solution. C6H5CH3 (92) → C6H5COOK (160). 12 g = 0.075 mol; toluene needed = 0.075/0.7666 = 0.0978 mol = 9.0 g, so 9 g.
Teacher's Note: Correct for percentage yield by dividing.
Exam Note: Yield below 100% needs more reactant.
Single Integer Question 27. 500 mL of a M and 500 mL of b M solution of a solute are mixed and diluted to 2 litre to prepare a solution of 1.5 M. If a and b are in the ratio 2 : 1, then value of a is ……
Solution. 500a + 500b = 1.5×2000 = 3000, so a + b = 6; with a = 2b: b = 2, a = 4.
Teacher's Note: Millimoles conserved on mixing and dilution.
Exam Note: a + b = 6 and a = 2b.
Single Integer Question 28. A sample of crystalline Ba(OH)2·xH2O weighing 1.578 g was dissolved in water. The solution required 40 mL of 0.25 N HNO3 for complete reaction. Determine the number of molecules of water of crystallisation in base.
Solution. Meq = 40×0.25 = 10; equivalent mass = 1.578/0.01 = 157.8, molar mass = 315.6 = 171 + 18x, so x = 8.03, i.e. 8.
Teacher's Note: Equivalent mass of base is half its molar mass.
Exam Note: Round x to the nearest integer.
Single Integer Question 29. The specific gravity of a solution of 1.8 g mL-1 having 62% by mass of acid. It is to be diluted to specific gravity of 1.2 g mL-1. What volume of water (in litre) should be added to 1 litre of this solution?
Solution. Assuming additive volumes: mass of 1 L = 1800 g. Adding w g water: (1800 + w)/(1000 + w) = 1.2, so w = 3000 g = 3 L.
Teacher's Note: Additive-volume assumption fixes the final density.
Exam Note: Water volume in litres equals mass in kg.
Single Integer Question 30. A mixture of Xe and F2 was heated and the white solid so formed reacted with H2 to give 81 mL of Xe at STP and HF. The HF formed required 68.43 mL of 0.3172 M NaOH for complete neutralisation. The empirical formula of white solid is XeFn. The value of n is ……
Solution. HF = 68.43×0.3172 = 21.71 mmol; Xe = 81/22.4 = 3.616 mmol. n = 21.71/3.616 = 6.
Teacher's Note: Mole ratio of HF to Xe equals fluorine atoms per Xe.
Exam Note: Convert Xe volume at STP to mmol.
Single Integer Question 31. 100 g HCl solution having density 1.20 g/mL contains 36.5 g HCl. How much volume in litre of this HCl is required to neutralise exactly 36 litre of N NaOH solution?
Solution. Volume of 100 g solution = 83.33 mL containing 1 eq HCl, so N = 12. 36 eq needs 36/12 = 3 L.
Teacher's Note: Normality from mass %, density: eq per litre.
Exam Note: 36 L of 1 N NaOH is 36 equivalents.
Single Integer Question 32. An element A forms a thiocyanate of formula A(CNS)m·nH2O. Analysis shows that compound contains 19.7% of A and 19% water. If atomic mass of A is 55.96, the value of m is ……
Solution. Molar mass = 55.96/0.197 = 284.06; water = 0.19×284.06 = 54 g, so n = 3; CNS = 284.06 − 55.96 − 54 = 174.1 = 3 × 58, so m = 3.
Teacher's Note: Use percentage composition to get molar mass, then split.
Exam Note: CNS has mass 58.
Single Integer Question 33. In the above problem the value of n is ……
Solution. From the previous analysis, water = 54 g = 3 mol, so n = 3.
Teacher's Note: Water mass divided by 18.
Exam Note: Same compound as Q32.
Single Integer Question 34. A certain metal M forms an insoluble oxalate M4O3(C2O4)3·12H2O. If 61.87 g of the complex are formed from n g oxalic acid (H2C2O4). The atomic mass of metal is 100. The value of n is ……
Solution. Molar mass of complex = 4×100 + 3×16 + 3×88 + 12×18 = 928. 61.87 g = 0.06667 mol, containing 3 × 0.06667 = 0.2 mol oxalate = 18 g H2C2O4. Corrected: n = 18 (the printed key says 'Two').
Teacher's Note: Oxalic acid mass follows from moles of oxalate in the complex.
Exam Note: Three oxalate units per formula unit.
Single Integer Question 35. 1 g dry algae absorbs 7.4×10-3 mole of CO2 per sec by photosynthesis. If the fixed carbon atoms were all stored after the photosynthesis as starch (C6H10O5)n, the time required in sec for absorption of CO2 by algae to double its own mass.
Solution. Per second: 7.4×10-3 mol C = 7.4×10-3/6 mol C6H10O5 units = 0.1998 g starch. To gain 1 g: t = 1/0.1998 = 5 s.
Teacher's Note: Six carbons per C6H10O5 unit (162 g mol-1).
Exam Note: Doubling mass means gaining 1 g.
Single Integer Question 36. One litre of milk mass 1.035 kg. The density of butter fat and fat free skimmed milk are 875 kg m-3 and 1042 kg m-3. The vol/vol per cent of butter fat in milk is ……
Solution. Let x L fat: 0.875x + 1.042(1 − x) = 1.035, so x = 0.0419 L, i.e. 4.19% ≈ 4.
Teacher's Note: Weighted density equation for two components.
Exam Note: Convert kg m-3 to kg L-1.
Single Integer Question 37. Chloride samples are prepared for analysis by using NaCl, KCl and NH4Cl separately or as mixture. What minimum volume of 5% by mass AgNO3 solution (sp. gravity 1.19 g/mL) must be added to a sample of 0.1498 g in order to ensure precipitation of chloride in every possible case?
Solution. Maximum chloride per gram is in NH4Cl (53.5): 0.1498/53.5 = 2.8×10-3 mol Cl-. AgNO3 = 2.8×10-3×170 = 0.476 g = 9.52 g solution = 9.52/1.19 = 8 mL.
Teacher's Note: Worst case is the lightest chloride, NH4Cl.
Exam Note: Solution mass = AgNO3/0.05.
Single Integer Question 38. Valence factor of potash alum is ……
Solution. Total positive charge in K2SO4·Al2(SO4)3·24H2O = 2 + 6 = 8.
Teacher's Note: Valence factor of salt equals total cation charge.
Exam Note: Same as Q15.
Single Integer Question 39. Valence factor of S in SO2 is four and in SO3 is six. Valence factor of S in 2SO2 + O2 → 2SO3 is ……
Solution. Oxidation number of S changes from +4 to +6, so n-factor = 2.
Teacher's Note: n-factor is the change in oxidation number.
Exam Note: Subtract oxidation states.
Single Integer Question 40. 2×1010 atoms of carbon are arranged in a straight line occupying 2.4 cm putting side by side. The radius of carbon atom in nm is ……
Solution. Diameter = length/number of atoms. Answer (from key): 6, i.e. r = 6×10-2 nm (0.06 nm), which follows when the line is 2.4 m: d = 2.4/2×1010 = 1.2×10-10 m. Corrected: with the printed 2.4 cm the arithmetic gives r = 6×10-4 nm.
Teacher's Note: Diameter equals line length divided by atoms; radius is half.
Exam Note: Check the length unit; the key matches 2.4 m.
Single Integer Question 41. 23.1 mL of 0.115 M solution of NaOH is required for the end point using bromocresol green for 25 mL of 0.107 M H3PO4. If the indicator phenolphthalein is used then 46.2 mL of same NaOH requires 25 mL of 0.107 M H3PO4. What is the ratio of replaceable H-atom in phenolphthalein and bromocresol green indicators?
Solution. Volumes of NaOH needed are 46.2 and 23.1 mL, i.e. phenolphthalein : bromocresol green = 46.2/23.1 = 2 (two H replaced vs one).
Teacher's Note: Ratio of NaOH volumes gives ratio of H atoms replaced.
Exam Note: Bromocresol green stops at H2PO4-.
Single Integer Question 42. Number of equivalents of oxygen in 1 M K2Cr2O7 acting as oxidant in presence of acid are ……
Solution. Cr2O72- + 14H+ + 6e- → 2Cr3+ + 7H2O: n-factor 6, so 1 mol = 6 equivalents.
Teacher's Note: n-factor equals electrons gained per formula unit.
Exam Note: Cr goes from +6 to +3, twice.
Single Integer Question 43. 1 mL of 12 M HCl is spread over a thin Al foil of thickness 0.1 mm and density 2.70 g/mL. Assuming area covered by HCl dissolves Al only, the area in cm2 of hole produced in Al foil is ……
Solution. HCl = 12 mmol = 12 meq; Al = 12×9 mg = 0.108 g; volume = 0.108/2.70 = 0.04 cm3. Area = 0.04/0.01 = 4 cm2.
Teacher's Note: Meq of HCl equals meq of Al (E = 9).
Exam Note: Convert 0.1 mm to 0.01 cm.
Single Integer Question 44. A hydrated salt MSO4·nH2O undergoes 43.9% loss in mass on heating and becomes anhydrous. If atomic mass of metal is 65, the value of n is ……
Solution. Molar mass = 161 + 18n; 18n/(161 + 18n) = 0.439, so n = 7.0, i.e. 7 (ZnSO4·7H2O).
Teacher's Note: Mass loss fraction equals water fraction.
Exam Note: Metal 65 is zinc.
Single Integer Question 45. The volume strength of H2O2 solution is 11.2. What is its normality?
Solution. Volume strength = 5.6 × N, so N = 11.2/5.6 = 2.
Teacher's Note: Use volume strength = 5.6 × normality.
Exam Note: Remember the factor 5.6.
Single Integer Question 46. Mole of 400 g CaCO3 is ……
Solution. Moles = 400/100 = 4.
Teacher's Note: Molar mass of CaCO3 is 100.
Exam Note: Simple mass/molar mass.
Single Integer Question 47. A mixture of HCOOH and H2C2O4 is heated with conc. H2SO4. The gaseous mixture on passing through KOH shows a reduction of 1/6 in volume at same P and T. The mole ratio of HCOOH and H2C2O4 in mixture is ……
Solution. Gases: a + b of CO and b of CO2; b = (a + 2b)/6 gives a/b = 4.
Teacher's Note: CO2 only from oxalic acid; KOH removes it.
Exam Note: Same as numerical problem 123.
Single Integer Question 48. Atomicity of sulphur in vapour state is ……
Solution. In the vapour state at high temperature sulphur exists as S2, so atomicity = 2.
Teacher's Note: Recall: S8 in solid; S2 in vapour at high T.
Exam Note: Key states atomicity 2.
Single Integer Question 49. An aqueous solution of 6.3 g oxalic acid (H2C2O4·2H2O) is dissolved in water to prepare 250 mL solution. The volume of 1 N NaOH required to neutralise 10 mL solution of oxalic acid is ……
Solution. Equivalent mass = 63; N = (6.3/63)/0.25 = 0.4 N. Meq: 10×0.4 = 1×V, so V = 4 mL.
Teacher's Note: Normality from mass, then N1V1 = N2V2.
Exam Note: Use hydrate's equivalent mass 63.
Single Integer Question 50. Equal masses of hydrogen and methane are taken in a container under identical conditions of P and T. The mole ratio of H2 and CH4 is ……
Solution. Moles ∝ 1/M: (1/2)/(1/16) = 8.
Teacher's Note: Equal mass gives inverse molar mass ratio.
Exam Note: Same as Q23.
Single Integer Question 51. An inorganic compound ZnCr2Ox, 9.81 g Zn, 1.8×1023 atoms of Cr and 0.6 g-atom of O. The value of x is ……
Solution. Zn = 9.81/65.4 = 0.15 mol; Cr = 1.8×1023/6.023×1023 = 0.3 mol; O = 0.6. Ratio 1 : 2 : 4, so x = 4 (ZnCr2O4).
Teacher's Note: Divide each amount by the smallest to get the formula.
Exam Note: Convert atoms and mass to moles first.
Single Integer Question 52. The equilibrium molarity of OH- is 0.08 M in a solution of 0.1 M M(OH)2. The % of dissociation of Ca(OH)2 is ……
Solution. Complete dissociation of 0.1 M Ca(OH)2 gives 0.2 M OH-. α = 0.08/0.2 = 0.4, i.e. 40% (key 'Four', read as 4×10).
Teacher's Note: Compare actual [OH-] with the maximum 2 × 0.1 M.
Exam Note: Two OH- per formula unit.
Single Integer Question 53. The normality of 0.5 M H3PO3 solution is ……
Solution. H3PO3 is dibasic: N = 0.5 × 2 = 1.
Teacher's Note: Only two H atoms bonded to O are replaceable.
Exam Note: H3PO3 is dibasic, not tribasic.
Single Integer Question 54. How much of the following have equilibrium molality of [H+] = 0.6 M: 0.3 M H2SO4, 0.3 M H3PO3, 0.6 M HI, 0.2 M H3PO4, 0.6 M HNO3.
Solution. Strong acids dissociate fully: H2SO4 (0.6), HI (0.6), HNO3 (0.6); H3PO3 and H3PO4 are weak. Count = 3.
Teacher's Note: Only strong acids give full [H+] = n × M.
Exam Note: Phosphorus acids do not dissociate fully.
Single Integer Question 55. How much of the following are temperature independent in case of solution: Meq. of solute, mole of solute, % by mass, mole fraction, molarity, normality, % by strength, strength, molality.
Solution. Independent of temperature: Meq of solute, mole of solute, % by mass, mole fraction, molality = 5.
Teacher's Note: Quantities based on mass or moles do not depend on volume.
Exam Note: Volume-based units vary with T.
Single Integer Question 56. How much of the following are dilution independent in case of solution: Meq. of solute, mole of solute, % by mass, mole fraction, molarity, molality, % by strength, strength, molality.
Solution. Only the amount of solute (Meq, mole) stays constant on dilution: 2.
Teacher's Note: Dilution changes concentrations, not amounts.
Exam Note: Amount of solute is invariant on dilution.
Single Integer Question 57. 245 g impure KClO3 decomposes to give 2.4 g O2. The % yield of product O2 is ……
Solution. Taking 245 g KClO3 = 2 mol, theoretical O2 = 3 mol = 96 g; % yield = 2.4/96 × 100 = 2.5. Corrected: 2.5% from the printed data (the printed key says 'Five').
Teacher's Note: % yield = actual/theoretical × 100.
Exam Note: 2KClO3 → 2KCl + 3O2.
Single Integer Question 58. Equilibrium molarity of 196 g H2SO4 present in 1 litre solution is ……
Solution. 196 g = 2 M H2SO4, a strong acid dissociating completely, so molarity of undissociated H2SO4 is 0.
Teacher's Note: Strong electrolytes leave no undissociated molecules.
Exam Note: Per the key, the answer is zero.
Single Integer Question 59. Ionic strength of Ba2+ present in a solution obtained by mixing 30 mL 0.1 N BaCl2 with 40 mL of 0.2 N Al2(SO4)3 is ……
Solution. Sulphate (8 meq) exceeds Ba2+ (3 meq), so all Ba2+ precipitates as BaSO4; contribution = 0.
Teacher's Note: Compare meq: excess sulphate removes all barium.
Exam Note: BaSO4 is insoluble.
Single Integer Question 60. A student performs a titration with different burettes and finds titre value of 25.2 mL, 25.25 mL, 25.0 mL. The number of significant figures in the average titre value is …… (IIT 2010)
Solution. Average = 25.15 mL; the least precise reading (25.0) limits it to 3 significant figures.
Teacher's Note: Result takes the fewest significant figures among the data.
Exam Note: Least precise reading governs significant figures.
Single Integer Question 61. The volume (in mL) of 0.10 M AgNO3 required for complete precipitation of chloride ions present in 30 mL of 0.01 M solution of [Cr(H2O)5Cl]Cl2 as silver chloride is close to …… (IIT 2011)
Solution. Ionic chloride = 2 per formula unit: 30×0.01×2 = 0.6 mmol. V = 0.6/0.10 = 6 mL.
Teacher's Note: Only chloride outside the coordination sphere precipitates.
Exam Note: Count two free chloride ions.
Single Integer Question 62. 29.2% (mass/mass) HCl stock solution has a density of 1.25 g mL-1. The molar mass of HCl is 36.5 g mol-1. The volume (mL) of stock solution required to prepare a 200 mL solution of 0.4 M HCl is …… (IIT 2012)
Solution. M = 29.2×1.25×10/36.5 = 10. M1V1 = M2V2: 10V = 0.4×200, so V = 8 mL.
Teacher's Note: Molarity = % × density × 10 / molar mass.
Exam Note: Then use dilution formula.
Objective Problems (One Answer Correct)
Objective Question 1. A sample contains 9.81 g Zn (atomic mass 65), 1.8×1023 atoms of Cr and 0.6 g-atoms of O. The simple formula of this compound is:
(a) ZnCrO4
(b) ZnCr2O4
(c) Zn2CrO4
(d) ZnCrO3
Solution. Answer: (b) ZnCr2O4.
Mole ratio Zn : Cr : O = 9.81/65 : 1.8×1023/6.023×1023 : 0.6 = 0.15 : 0.30 : 0.6 = 1 : 2 : 4. Formula ZnCr2O4.
Teacher's Note: Divide moles by the smallest to get the simplest ratio.
Exam Note: Convert atoms and grams to moles first.
Objective Question 2. The number of H+ ions present in 100 mL of 0.001 M H2SO4 solution is:
(a) 1.2×1020
(b) 6×1019
(c) 2.4×1020
(d) 1.2×1023
Solution. Answer: (a) 1.2×1020.
Corrected: Meq of H+ = 100×0.001×2 = 0.2, i.e. 0.2×10-3 mol H+. Number = 0.2×10-3×6.023×1023 = 1.2×1020. (The book printed (d) 1.2×1023, forgetting the factor 10-3 to convert millimoles to moles.)
Teacher's Note: Convert milli-equivalents to equivalents before multiplying by Avogadro's number.
Exam Note: Dibasic acid gives two H+; mind the milli factor.
Objective Question 3. The atomic masses of two elements A and B are 30 and 90 respectively. If 'a' g of element A contains 'b' atoms, then number of atoms of B in 2a g is:
(a) 2b/3
(b) b/3
(c) b/4
(d) b/2
Solution. Answer: (a) 2b/3.
Atoms of A in a g: N×a/30 = b. Atoms of B in 2a g = N×2a/90 = (2/3)(N×a/30) = 2b/3.
Teacher's Note: Number of atoms is inversely proportional to atomic mass for given mass.
Exam Note: Compare using the ratio of atomic masses.
Objective Question 4. A nugget of gold and quartz weighs 100 g. Specific gravity of gold, quartz and nugget are 20.0, 4.0 and 5.0 g mL-1 respectively. The mass of gold in nugget is:
(a) 30 g
(b) 35 g
(c) 25 g
(d) 20 g
Solution. Answer: (c) 25 g.
Volume of nugget = volume of gold + volume of quartz: 100/5 = a/20 + (100 − a)/4, so a = 25 g.
Teacher's Note: Volumes of the two components add up to nugget volume.
Exam Note: Use V = m/d for each component.
Objective Question 5. The mass of wet NaOH containing 20% water required to neutralise 6 litre of 0.5 M H2SO4 solution is:
(a) 3 kg
(b) 1.5 kg
(c) 0.3 kg
(d) 0.15 kg
Solution. Answer: (c) 0.3 kg.
Eq of NaOH = eq of H2SO4 = 6×0.5×2 = 6, so mass of NaOH = 240 g. 80 g NaOH is in 100 g wet NaOH, so wet NaOH = 100×240/80 = 300 g = 0.3 kg.
Teacher's Note: Pure mass from equivalents, then correct for the 20% water.
Exam Note: Convert g to kg in the answer.
Objective Question 6. 1 g of an acid (molar mass 146) is completely neutralised by 0.768 g KOH. The number of neutralisable protons in acid are:
(a) 1
(b) 3
(c) 2
(d) 4
Solution. Answer: (c) 2.
Meq of acid = Meq of KOH: (1/(146/n))×1000 = (0.768/56)×1000, so n = 2.
Teacher's Note: Basicity is the factor linking molar mass to equivalent mass.
Exam Note: Equate equivalents of acid and base.
Objective Question 7. The volume ratio of 6 N and 2 N HCl required to prepare 100 mL of 5 N HCl is:
(a) 3 : 1
(b) 1 : 3
(c) 4 : 1
(d) 1 : 4
Solution. Answer: (a) 3 : 1.
Let a mL of 6 N: 6a + 2(100 − a) = 500, so a = 75 mL; 2 N = 25 mL. Ratio 3 : 1.
Teacher's Note: Alligation or equivalents balance gives the ratio.
Exam Note: Equivalents before and after mixing are equal.
Objective Question 8. 105 mL of pure water at 4°C is saturated with NH3 producing a solution of 30% by mass of NH3. The total mass of solution after saturation becomes:
(a) 105 g
(b) 130 g
(c) 150 g
(d) 160 g
Solution. Answer: (c) 150 g.
Water = 105 g (density 1 at 4°C). a/(105 + a) = 30/100 gives a = 45 g NH3. Mass of solution = 105 + 45 = 150 g.
Teacher's Note: Water is 70% of final mass: 105/0.7 = 150 g.
Exam Note: Density of water at 4°C is 1 g/mL.
Objective Question 9. The total ionic strength of solution on mixing 10 mL of 1 N AgNO3 and 90 mL of 1 N BaCl2 solution is:
(a) 2.8
(b) 2.6
(c) 1.35
(d) 1.2AgCl precipitate does not contribute to ionic strength.
Solution. Answer: (c) 1.35.
AgNO3 (10 meq) removes 10 meq Cl- as AgCl, leaving BaCl2 80 meq → 0.4 M and Ba(NO3)2 10 meq → 0.05 M in 100 mL.
Teacher's Note: μ = ½ΣcZ2 = ½[0.4×4 + 0.4×2×1 + 0.05×4 + 0.05×2×1] = 1.35.
Exam Note: Remove the precipitate (AgCl) before counting ions.
Objective Question 10. The mass of 5 litre C6H6 is maximum at:
(a) 10°C
(b) 20°C
(c) 30°C
(d) 40°C
Solution. Answer: (a) 10°C.
The volume of a liquid increases with temperature, so density falls; the same volume has greater mass at the lowest temperature.
Teacher's Note: Density falls on heating, so mass of fixed volume is highest when cold.
Exam Note: Mass = volume × density.
Objective Question 11. An aqueous solution of glucose is 10% by mass/mass of solution. The percentage by mass/mass of solvent is: (assume dH2O = 1)
(a) 11.11%
(b) 15%
(c) 20.22%
(d) 22.22%
Solution. Answer: (a) 11.11%.
In 100 g solution: solute 10 g, solvent 90 g. Required percentage = 10/90 × 100 = 11.11%.
Teacher's Note: The question asks solute mass as % of solvent mass.
Exam Note: Solvent mass = solution minus solute.
Objective Question 12. The equivalent mass of a metal is double that of oxygen. The ratio of masses of metal oxide and mass of the metal is:
(a) 2
(b) 1.5
(c) 2.5
(d) 3.0
Solution. Answer: (b) 1.5.
EM = 2×8 = 16; EMO = 16 + 8 = 24. For w1 g metal giving w2 g oxide: w2/w1 = 24/16 = 1.5.
Teacher's Note: Oxide equivalent mass is metal plus 8.
Exam Note: Equivalent mass of oxygen is 8.
Objective Question 13. The volume and radius of 1 molecule of water is: (assume dH2O = 1 g/mL)
(a) 3.0×10-20, 19.25 Å
(b) 6.0×10-23, 2.42 Å
(c) 3.0×10-23, 1.925 Å
(d) 6.0×10-23, 1.925 Å
Solution. Answer: (c) 3.0×10-23, 1.925 Å.
Volume of one molecule = 18/6.023×1023 = 3.0×10-23 cm3. (4/3)πr3 = 3.0×10-23 gives r = 1.925 Å.
Teacher's Note: Molar volume divided by N gives molecular volume.
Exam Note: 1 Å = 10-8 cm.
Objective Question 14. If a = 49 g H2SO4 + (3×1023 molecule H2SO4) − (0.02 N H2SO4), then the value of a is:
(a) 0.9 mol
(b) 0.99 mol
(c) 0.8 mol
(d) 0.88 mol
Solution. Answer: (b) 0.99 mol.
a = 49/98 + 3×1023/6×1023 − 0.02/2 = 0.5 + 0.5 − 0.01 = 0.99 mol.
Teacher's Note: Convert each term to moles; 0.02 eq is 0.01 mol.
Exam Note: 0.02 N means 0.02 eq, i.e. 0.01 mol of H2SO4.
(a) He and H2
(b) CH4 and He
(c) CO and N2
(d) O2 and CO
Solution. Answer: (c) CO and N2.
Equal moles of any gas at STP occupy equal volume, so all points should lie at the same height. Molar mass of CO = N2 = 28 but the figure shows different volumes for them (and indeed for every gas). By the book's reasoning (VCO = VN2), the pair that does not follow the plot is CO and N2.
Teacher's Note: Equal moles at the same P and T have equal volumes irrespective of the gas.
Exam Note: Avogadro's law is independent of molar mass.
Objective Question 16. A solution requires [OH-] = 2 M. If degree of dissociation of Mg(OH)2 is α, what analytical molarity of solution of Mg(OH)2 needed is equal to:
(a) α
(b) 2α
(c) 1/α
(d) 1/2α
Solution. Answer: (c) 1/α.
Mg(OH)2 ⇌ Mg2+ + 2OH-: [OH-] = 2cα = 2, so c = 1/α.
Teacher's Note: Each formula unit gives two OH-, scaled by α.
Exam Note: Write [OH-] = 2cα.
Objective Question 17. Hardness of water is 400 ppm. The molarity of CaCO3 in this water is:
(a) 4×10-6 M
(b) 4×10-2 M
(c) 4×10-3 M
(d) 4×10-1 M
Solution. Answer: (c) 4×10-3 M.
400 g CaCO3 is in 106 g (= 106 mL) water. Molarity = 400×103/(100×106) = 4×10-3 M.
Teacher's Note: Hardness in ppm is g CaCO3 per 106 g water.
Exam Note: Convert mL to litre.
Objective Question 18. The volume strength of 1.5 N H2O2 solution is:
(a) 4.8
(b) 8.4
(c) 3.0
(d) 8.0
Solution. Answer: (b) 8.4.
Volume strength = 5.6 × normality = 5.6 × 1.5 = 8.4.
Teacher's Note: Memorise V = 5.6 N for hydrogen peroxide.
Exam Note: Factor is 5.6, not 11.2.
Objective Question 19. The normality of 0.3 M phosphorous acid is:
(a) 0.1
(b) 0.9
(c) 0.3
(d) 0.6
Solution. Answer: (d) 0.6.
H3PO3 is dibasic, so N = 0.3 × 2 = 0.6.
Teacher's Note: Phosphorous acid is dibasic: two replaceable H.
Exam Note: Do not treat H3PO3 as tribasic.
Objective Question 20. How many g of KCl would have to be dissolved in 60 g H2O to give 20% by mass of solution:
(a) 1.5 g
(b) 15 g
(c) 25 g
(d) 12 g
Solution. Answer: (b) 15 g.
w/(w + 60) × 100 = 20, so w = 15 g.
Teacher's Note: Mass percent uses total solution mass in the denominator.
Exam Note: Solution mass = solute + water.
Objective Question 21. 10 mL of oxygen and 60 mL of H2 is sparked till reaction is complete to form H2O(l). After attaining the initial condition of P and T, the reduction in volume (in mL) of gases after reaction is:
(a) 30
(b) 40
(c) 20
(d) 10
Solution. Answer: (a) 30.
H2 + ½O2 → H2O: 10 mL O2 uses 20 mL H2. Final gas = 40 mL H2. Reduction = 70 − 40 = 30 mL.
Teacher's Note: O2 is limiting; H2 is in excess.
Exam Note: Water formed is liquid so contributes no volume.
Objective Question 22. 10 mL of CH4 was burnt in limited supply of oxygen forming CO2 and CO in the ratio 99 : 1 along with water vapours. The volume of oxygen needed in mL for the change is:
(a) 19.95
(b) 19.9
(c) 9.95
(d) 9.9
Solution. Answer: (a) 19.95.
CH4 to CO = 0.1 mL (needs 1.5×0.1 = 0.15 mL O2); CH4 to CO2 = 9.9 mL (needs 2×9.9 = 19.8 mL). Total O2 = 19.95 mL.
Teacher's Note: Split methane between the two oxidation products.
Exam Note: CO needs 1.5 O2; CO2 needs 2.
Objective Question 23. The formula of a hydrated salt of barium is BaCl2·XH2O. If 1.936 g of this compound gives 1.846 g of anhydrous BaSO4 on treatment with H2SO4, the value of X is:
(a) 7
(b) 5
(c) 3
(d) 2
Solution. Answer: (d) 2.
Moles of BaSO4 = 1.846/233; moles of hydrate = 1.936/(208 + 18X). Equating (one Ba each): X = 2.
Teacher's Note: Ba is conserved from hydrate to BaSO4.
Exam Note: Molar mass of BaCl2 is 208.
Objective Question 24. 40% (mass/vol) NaCl has specific gravity 1.12 g mL-1. In ppm the concentration of NaCl is:
(a) 5.5×105 ppm
(b) 3.57×106 ppm
(c) 1×106 ppm
(d) 4×105 ppm
Solution. Answer: (a) 5.5×105 ppm.
100 mL solution = 112 g, containing 40 g NaCl and 72 g water. Per the book, ppm = (40/72)×106 = 5.5×105 (mass of NaCl per 106 parts of water). Note: using solution mass, (40/112)×106 = 3.57×105, which does not match option (b) as printed (106); please check.
Teacher's Note: Convert mass/volume to mass/mass using specific gravity.
Exam Note: Check which mass the ppm denominator uses.
Objective Question 25. What mass of NH3 contains same number of atoms as 4 g-atom of oxygen:
(a) 17 g
(b) 68 g
(c) 42 g
(d) 34 g
Solution. Answer: (a) 17 g.
Atoms in 4 g-atom O = 4N. One NH3 molecule has 4 atoms, so 4N atoms are present in N molecules = 1 mol = 17 g NH3.
Teacher's Note: Count atoms per molecule, not molecules.
Exam Note: NH3 has four atoms per molecule.
Objective Question 26. The ratio of oxygen atoms in Ca3(PO4)2 and H3PO3 if each sample of Ca3(PO4)2 and H3PO3 contains same number of P atoms:
(a) 3/4
(b) 4/3
(c) 2/3
(d) 3/2
Solution. Answer: (b) 4/3.
Ca3(PO4)2 has 2 P and 8 O; H3PO3 has 1 P and 3 O, so 2 P atoms need 6 O. Ratio = 8/6 = 4/3.
Teacher's Note: Match phosphorus atoms first, then count oxygen.
Exam Note: Equal P atoms means two H3PO3 per calcium phosphate.
Objective Question 27. Select the incorrect statement for exact neutralisation of 1 mole of Ba(OH)2 by:
(a) 1.5 mole of H3PO3
(b) 1 mole of H2SO4
(c) (2/3) mole of H3PO4
(d) 2 mole of H3PO2
Solution. Answer: (a) 1.5 mole of H3PO3.
1 mol Ba(OH)2 gives 2 mol OH- and needs 2 mol H+. 1.5 mol H3PO3 (dibasic) gives 3 mol H+; (2/3) mol H3PO4 gives 2; 1 mol H2SO4 gives 2; 2 mol H3PO2 (monobasic) gives 2. So (a) is incorrect.
Teacher's Note: Compare replaceable H of each acid with the 2 OH-.
Exam Note: H3PO2 monobasic, H3PO3 dibasic.
Objective Question 28. A gaseous mixture of H2 and CO2 contains 44% of CO2 by mass. The vapour density of mixture is:
(a) 2.72
(b) 1.72
(c) 3.45
(d) 1.36
Solution. Answer: (b) 1.72.
In 100 g: CO2 = 44 g (1 mol), H2 = 56 g (28 mol). 100/(1 + 28) = M = 3.45, so V.D. = M/2 = 1.72.
Teacher's Note: Total mass over total moles gives molar mass; V.D. is half.
Exam Note: Divide M by 2 for vapour density.
Objective Question 29. On heating 17.0 g AgNO3, the residue left is:
(a) 1.16 g
(b) 10.8 g
(c) 2.32 g
(d) 1.08 g
Solution. Answer: (b) 10.8 g.
2AgNO3 → 2Ag + 2NO2 + O2. 1 mol (170 g) AgNO3 gives 1 mol Ag (108 g), so 17 g gives 10.8 g.
Teacher's Note: Silver nitrate on heating leaves silver metal.
Exam Note: Residue is Ag, not Ag2O.
Objective Question 30. How many gram of dibasic acid (molar mass 200) should be present in 100 mL of the aqueous solution to give 0.1 N solution:
(a) 1 g
(b) 1.5 g
(c) 0.5 g
(d) 20 g
Solution. Answer: (a) 1 g.
Meq = (w/(200/2)) × 1000 = 0.1 × 100, so w = 1.0 g.
Teacher's Note: Equivalent mass of dibasic acid is M/2.
Exam Note: Meq = N × V(mL).
Objective Question 31. Specific volume of a cylindrical virus particle is 6.02×10-2 mL/g, having the radius and length 7 Å and 10 Å respectively. What is the molar mass of virus:
(a) 15.4 kg/mol
(b) 1.54×104 kg/mol
(c) 4.68×104 kg/mol
(d) 2.08×104 kg/mol
Solution. Answer: (a) 15.4 kg/mol.
Volume = πr2l = (22/7)(7×10-8)2(10×10-8) = 1.54×10-21 mL. Molar mass = (1.54×10-21/6.02×10-2)×6.02×1023 = 15400 g/mol = 15.4 kg/mol.
Teacher's Note: Particle volume divided by specific volume gives mass per particle.
Exam Note: 1 Å = 10-8 cm.
Objective Question 32. Percentage of Se (atomic mass 78.4) in peroxidase anhydrous enzyme is 0.5% by mass. The minimum molar mass of enzyme is:
(a) 1.568×103
(b) 1.568×104
(c) 25.68
(d) 4.316×104
Solution. Answer: (b) 1.568×104.
0.5 g Se is in 100 g enzyme, so 78.4 g Se is in 100×78.4/0.5 = 1.568×104 g. One Se atom per molecule gives the minimum molar mass.
Teacher's Note: Minimum molar mass assumes one atom of Se.
Exam Note: Same method as insulin sulphur problem.
Objective Question 33. 2.5 litre of 1 M NaOH solution is mixed with another 3 litre of 0.5 M NaOH solution. The molarity of resultant solution is:
(a) 1.0 M
(b) 0.84 M
(c) 0.73 M
(d) 0.56 M
Solution. Answer: (c) 0.73 M.
Total mole = 2.5×1 + 3×0.5 = 4.0; total volume = 5.5 L; M = 4/5.5 = 0.73 M.
Teacher's Note: Add moles and add volumes.
Exam Note: Moles are conserved on mixing.
Objective Question 34. What volume of O2 gas at 0°C and 1 atm is needed to burn completely one litre of propane under same conditions:
(a) 5 litre
(b) 10 litre
(c) 7 litre
(d) 6 litre
Solution. Answer: (a) 5 litre.
C3H8 + 5O2 → 3CO2 + 4H2O: 1 L propane needs 5 L O2.
Teacher's Note: Volume ratio equals mole ratio at same P, T.
Exam Note: Balance the combustion equation first.
Objective Question 35. How many mole of lead(II) chloride will be formed from a reaction between 6.5 g PbO and 3.2 g HCl:
(a) 0.011
(b) 0.029
(c) 0.044
(d) 0.33
Solution. Answer: (b) 0.029.
PbO + 2HCl → PbCl2 + H2O. PbO = 6.5/224 = 0.029 mol; HCl = 3.2/36.5 = 0.087 mol (needs 0.058 mol). PbO is limiting, so PbCl2 = 0.029 mol.
Teacher's Note: Compare moles with the 1 : 2 ratio to find the limiting reagent.
Exam Note: PbO is limiting.
Objective Question 36. The maximum number of molecules is present in:
(a) 15 litre of H2 gas at STP
(b) 5 litre N2 gas at STP
(c) 0.5 g of H2 gas
(d) 5 g of O2 gas
Solution. Answer: (a) 15 litre of H2 gas at STP.
Moles: H2 15/22.4 = 0.67; N2 5/22.4 = 0.22; H2 0.5/2 = 0.25; O2 5/32 = 0.16. Maximum in (a).
Teacher's Note: Convert each quantity to moles and compare.
Exam Note: Largest number of moles means most molecules.
Objective Question 37. 27 g Al will react completely with …… g oxygen:
(a) 8
(b) 16
(c) 24
(d) 32
Solution. Answer: (c) 24.
2Al + (3/2)O2 → Al2O3: 1 mol Al needs 3/4 mol O2 = (3/4)×32 = 24 g.
Teacher's Note: Equivalents of Al and O are equal: 3 eq O = 24 g.
Exam Note: Aluminium gives three equivalents.
Objective Question 38. 10 g CaCO3 contains:
(a) 10 mole of CaCO3
(b) 1 g-atom of Ca
(c) 6×1022 atoms of Ca
(d) 0.1 equivalent of Ca
Solution. Answer: (c) 6×1022 atoms of Ca.
10 g CaCO3 = 0.1 mol, so contains 0.1 g-atom Ca = 6×1022 atoms; equivalents of Ca = 0.2.
Teacher's Note: 0.1 mol times Avogadro's number gives atoms.
Exam Note: Ca is bivalent: 0.1 mol is 0.2 eq.
Objective Question 39. Which of the following has highest mass?
(a) 20 g phosphorus
(b) 5 moles of water
(c) 2 equivalent of Na2CO3
(d) 12×1024 atoms of hydrogen
Solution. Answer: (c) 2 equivalent of Na2CO3.
(a) 20 g; (b) 5×18 = 90 g; (c) 2 eq × 53 = 106 g; (d) 12×1024 atoms H = 20 g. Highest is (c).
Teacher's Note: Convert each option to grams.
Exam Note: Equivalent mass of Na2CO3 is 53.
Objective Question 40. When the same mass of Zn is treated separately with excess of H2SO4 and excess of NaOH, the ratio of volumes of H2 evolved is:
(a) 1 : 1
(b) 1 : 2
(c) 2 : 1
(d) 9 : 4
Solution. Answer: (a) 1 : 1.
Zn + H2SO4 → ZnSO4 + H2; Zn + 2NaOH → Na2ZnO2 + H2. Each mole of Zn gives one mole H2, so the ratio is 1 : 1.
Teacher's Note: Zinc is amphoteric and yields one H2 per atom in both.
Exam Note: Compare mole ratio of Zn to H2.
Objective Question 41. 2.76 g silver carbonate on heating strongly yields a residue weighing:
(a) 2.16 g
(b) 2.48 g
(c) 2.32 g
(d) 2.64 g
Solution. Answer: (a) 2.16 g.
Ag2CO3 (276) → 2Ag (216) + CO2 + ½O2. 2.76 g gives 2.16 g Ag.
Teacher's Note: Strong heating decomposes the carbonate to silver.
Exam Note: Residue is silver metal.
Objective Question 42. A gaseous mixture contains oxygen and nitrogen in the ratio of 1 : 4 by mass. Therefore the ratio of their molecules is:
(a) 1 : 4
(b) 1 : 8
(c) 7 : 32
(d) 3 : 16
Solution. Answer: (c) 7 : 32.
nO2/nN2 = (w/32)/(4w/28) = (1/4)(28/32) = 7/32.
Teacher's Note: Mole ratio equals mass ratio divided by molar masses.
Exam Note: Molecules ratio equals mole ratio.
Objective Question 43. The largest number of molecules is in:
(a) 36 g H2O
(b) 28 g CO
(c) 46 g C2H5OH
(d) 54 g N2O5
Solution. Answer: (a) 36 g H2O.
Moles: H2O 36/18 = 2; CO 1; C2H5OH 1; N2O5 54/108 = 0.5. Largest is 36 g H2O (2 mol).
Teacher's Note: Compare moles, not masses.
Exam Note: Divide each mass by molar mass.
Objective Question 44. 0.50 mole of BaCl2 is mixed with 0.20 mole of Na3PO4, the maximum number of mole of Ba3(PO4)2 that can be formed is:
(a) 0.70
(b) 0.50
(c) 0.20
(d) 0.10
Solution. Answer: (d) 0.10.
3BaCl2 + 2Na3PO4 → Ba3(PO4)2 + 6NaCl. 0.20 mol Na3PO4 is limiting (needs 0.30 mol BaCl2), giving 0.10 mol.
Teacher's Note: Use the limiting reagent and the 2 : 1 ratio.
Exam Note: Na3PO4 limits the product.
Objective Question 45. A molal solution is one that contains one mole of solute in:
(a) 1000 g of the solvent
(b) 1 litre of the solvent
(c) 1 litre of solution
(d) 22.4 litres of solution
Solution. Answer: (a) 1000 g of the solvent.
Molality = mole of solute/mass of solvent in kg, so one mole per 1000 g of solvent.
Teacher's Note: Molality is defined per kilogram of solvent.
Exam Note: Do not confuse molal with molar.
Objective Question 46. The pair of compounds which can not exist together in solution is:
(a) NaHCO3 and NaOH
(b) Na2CO3 and NaHCO3
(c) Na2CO3 and NaOH
(d) NaHCO3 and NaOH
Solution. Answer: (a) NaHCO3 and NaOH.
NaHCO3 is an acid salt and NaOH a base: NaHCO3 + NaOH → Na2CO3 + H2O, so they cannot coexist. (Option (d) repeats (a) in the source.)
Teacher's Note: An acid salt reacts with a base.
Exam Note: Bicarbonate cannot coexist with hydroxide.
Objective Question 47. In which mode of expression, the concentration of a solution remains independent of temperature?
(a) Molarity
(b) Normality
(c) Formality
(d) Molality
Solution. Answer: (d) Molality.
Molality involves only masses, which do not change with temperature.
Teacher's Note: Mass-based units are temperature independent.
Exam Note: Volume-based units vary with temperature.
Objective Question 48. At 1000°C and 1 atm, if the density of the liquid water is 1.0 g cm-3 and that of water vapour is 0.006 g cm-3, then the volume occupied by water molecules in 1 litre of steam at this temperature is:
(a) 6 cm3
(b) 60 cm3
(c) 0.6 cm3
(d) 0.06 cm3
Solution. Answer: (a) 6 cm3.
Corrected: mass of 1000 cm3 steam = 1000 × 0.006 = 6 g, so the volume of liquid water = 6/1.0 = 6 cm3. (The book used 1000 × 0.0006 = 0.6 g and marked (c), which does not match the printed density 0.006 g cm-3.)
Teacher's Note: Volume of molecules equals mass of steam divided by liquid density.
Exam Note: Use the density value actually given.
Objective Question 49. The difference in the volume of gases obtained after complete decomposition of 100 mL sample of NH3 and PH3 each separately. Given that both produce all the product in vapour state:
(a) 25 mL
(b) 50 mL
(c) 75 mL
(d) 100 mL
Solution. Answer: (a) 25 mL.
2NH3 → N2 + 3H2: 100 mL gives 50 + 150 = 200 mL. 4PH3 → P4 + 6H2: 100 mL gives 25 + 150 = 175 mL. Difference = 25 mL.
Teacher's Note: Phosphorus vapour is tetratomic (P4), nitrogen diatomic.
Exam Note: P4 molecule counts as one gas molecule.
Objective Question 50. The molar ratio of Fe2+ and Fe3+ ions in a mixture of FeSO4 and Fe2(SO4)3 if each component of mixture provides equal no. of sulphate ions:
(a) 2 : 3
(b) 3 : 2
(c) 1 : 2
(d) 1 : 4
Solution. Answer: (b) 3 : 2.
For equal sulphate: 3 mol FeSO4 (3 Fe2+, 3 SO42-) and 1 mol Fe2(SO4)3 (2 Fe3+, 3 SO42-). Fe2+ : Fe3+ = 3 : 2.
Teacher's Note: Equalise sulphate to relate the two salts.
Exam Note: Fe2(SO4)3 gives two Fe3+ and three sulphate.
Objective Question 51. Number of mole of Na+ ions in 20 litre of 0.4 M Na3PO4 is:
(a) 8
(b) 24
(c) 16
(d) 12
Solution. Answer: (b) 24.
Mole of Na3PO4 = 20×0.4 = 8; each contains 3 Na+, so 24 mol.
Teacher's Note: Moles of salt times ions per formula unit.
Exam Note: Na3PO4 gives three Na+.
Objective Question 52. 28 g KOH is used to completely neutralise CO2 produced by heating 60 g impure sample CaCO3. The percentage purity of CaCO3 is:
(a) 83.32
(b) 20.83
(c) 41.66
(d) 40.00
Solution. Answer: (c) 41.66.
KOH = 28/56 = 0.5 mol. 2KOH + CO2 → K2CO3 + H2O, so CO2 = 0.25 mol. CaCO3 = 0.25 mol = 25 g; purity = 25/60 × 100 = 41.66%.
Teacher's Note: Complete neutralisation gives the normal carbonate.
Exam Note: Two KOH per CO2.
Objective Question 53. An aqueous solution of 6.3 g oxalic acid dihydrate is made upto 250 mL. The volume of 0.1 N NaOH required to completely neutralise 10 mL of this solution is: (IIT 2001)
(a) 40 mL
(b) 20 mL
(c) 10 mL
(d) 4 mL
Solution. Answer: (a) 40 mL.
Meq of acid = (6.3/63) × (1000/250) × 10 = 4 = 0.1 × V, so V = 40 mL.
Teacher's Note: Equivalent mass of the dihydrate is 63; compute Meq in 10 mL.
Exam Note: N of acid = 0.4.
Objective Question 54. How many mole of electron weigh one kilogram? (IIT 2002)
(a) 6.023×1023
(b) (1/9.108)×1023
(c) (6.023×1054)/9.108
(d) (1/(9.108×6.023))×108
Solution. Answer: (d) (1/(9.108×6.023))×108.
Mass of one electron = 9.108×10-31 kg. Electrons in 1 kg = 1/9.108×10-31; moles = (1/9.108×10-31)(1/6.023×1023) = 108/(9.108×6.023).
Teacher's Note: Divide 1 kg by mass of one electron, then by N.
Exam Note: Options are the exact printed forms; (d) matches.
Objective Question 55. 0.02 mole of [Co(NH3)5SO4]Br and 0.02 mole of [Co(NH3)5Br]SO4 were used to prepare 2 litre solution. One litre of this solution on treatment with excess of AgNO3 gives Y and Z respectively. Number of mole of Y and Z obtained are: (IIT 2003)
(a) 0.01, 0.02
(b) 0.02, 0.02
(c) 0.01, 0.01
(d) 0.02, 0.01
Solution. Answer: (c) 0.01, 0.01.
The first complex has ionic Br- (gives AgBr, Y) and the second ionic SO42- (gives Ag2SO4, Z). In 1 L there are 0.01 mol of each complex, so 0.01 mol AgBr and 0.01 mol Ag2SO4.
Teacher's Note: Only ions outside the coordination sphere precipitate.
Exam Note: One litre holds half of each complex.
Objective Question 56. Which has the maximum number of atoms? (IIT 2003)
(a) 24 g C (12)
(b) 56 g Fe (56)
(c) 27 g Al (27)
(d) 108 g Ag (108)
Solution. Answer: (a) 24 g C (12).
Moles: C 24/12 = 2; Fe 1; Al 1; Ag 1. Carbon has the most atoms.
Teacher's Note: Number of atoms is proportional to moles.
Exam Note: Compare mass/atomic mass.
Objective Question 57. Dissolving 120 g of urea (molar mass 60) in 1000 g of water gave a solution of density 1.15 g/mL. The molarity of the solution is: (IIT 2011)
(a) 1.78 M
(b) 2.00 M
(c) 2.05 M
(d) 2.22 M
Solution. Answer: (c) 2.05 M.
Mass of solution = 1120 g; volume = 1120/1.15 mL. M = (120/60)×1000/(1120/1.15) = 2.05 M.
Teacher's Note: Volume of solution comes from mass and density, not just water volume.
Exam Note: Volume = mass/density.
Objective Question 58. A gaseous hydrocarbon gives upon combustion 0.72 g of water and 3.08 g of CO2. The empirical formula of the hydrocarbon is: (JEE Main 2013)
(a) C6H5
(b) C7H8
(c) C2H4
(d) C3H4
Solution. Answer: (b) C7H8.
CO2 = 3.08/44 = 0.07 mol → C = 0.07; H2O = 0.72/18 = 0.04 mol → H = 0.08. C : H = 7 : 8, so C7H8.
Teacher's Note: Atoms of C and H from CO2 and H2O.
Exam Note: Water has two H per molecule.
Objective Question 59. The molarity of a solution obtained by mixing 750 mL of 0.5 (M) HCl with 250 mL of 2 (M) HCl will be: (JEE Main 2013)
(a) 1.75 M
(b) 0.975 M
(c) 0.875 M
(d) 1.00 M
Solution. Answer: (c) 0.875 M.
Millimoles: 750×0.5 + 250×2 = 375 + 500 = 875 in 1000 mL, so M = 0.875.
Teacher's Note: Millimoles add; volumes add.
Exam Note: Divide total mmol by total mL.
Objective Problems (More Than One Answer Correct)
Objective Question (More Than One Correct) 1. 1 mole of a mixture of CO and CO2 requires exactly 1 litre solution of 1 M NaOH for complete neutralisation. If CO present in mixture is now converted to CO2 and again the mixture is treated with NaOH, then after this conversion:
(a) mole of CO2 present initially = 1
(b) 2 litre NaOH solution of 1 M is more required for neutralisation
(c) 2 litre solution of ½ M NaOH is more required for neutralisation
(d) 56 g KOH in aqueous solution is required more for neutralisation
Solution. Answer: (c), (d).
CO2 + 2NaOH → Na2CO3 + H2O. 1 mol NaOH neutralises 0.5 mol CO2, so initially CO2 = 0.5 mol and CO = 0.5 mol. Converting CO to CO2 gives 0.5 mol more CO2, needing 1 mol more NaOH = 2 L of ½ M NaOH = 1 mol KOH = 56 g.
Teacher's Note: CO is neutral; only CO2 consumes alkali, two NaOH per CO2.
Exam Note: Valency factor of CO2 is 2.
Objective Question (More Than One Correct) 2. 2 g of oleum was diluted with water. The solution was then neutralised by 432.5 mL of 0.1 N NaOH. Select the correct statements:
(a) % of oleum is 108.11
(b) % of free SO3 is 26.5 in oleum
(c) Equivalent of H2SO4 are 0.03
(d) Equivalent of SO3 = 6.625×10-3
Solution. Answer: (b), (c).
Let oleum contain a g H2SO4 and b g SO3: a + b = 2 …(1). Meq: a/49 × 1000 + b/40 × 1000 = 0.1 × 432.5, so 40a + 49b = 84.77 …(2). Solving: a = 1.47 g, b = 0.53 g.
Equivalents of H2SO4 = 1.47/49 = 0.03 (so (c) is correct). Equivalents of SO3 = 0.53/40 = 0.01325, not 6.625×10-3 (so (d) is not correct).
Free SO3 = 0.53 × 100/2 = 26.5% (so (b) is correct).
Corrected: (100 + a)% oleum means a g of water reacts with the free SO3 in 100 g oleum. Here 26.5 g SO3 needs 26.5×18/80 = 5.96 g water, so the oleum is 105.96%, not 108.11%; (a) is not correct. (The book's key printed (a), (b), (c).)
Teacher's Note: Two unknowns: mass of H2SO4 and SO3; use total mass and total equivalents.
Exam Note: Label % = 100 + water needed per 100 g oleum.
Objective Question (More Than One Correct) 3. Which one is not correct about VO + Fe2O3 → FeO + V2O5?
(a) 2 mole of VO reacts completely with 5 mole of Fe2O3
(b) 1 mole of VO reacts completely with 1.5 mole of Fe2O3
(c) Eq. mass of V2O5 is M/6 and of Fe2O3 is M/2
(d) Eq. mass of VO = M/3 and of FeO is 2M/3
Solution. Answer: (a), (d).
Balanced: 2VO + 3Fe2O3 → 6FeO + V2O5. V2+ → V5+ loses 3 e- (VO: n = 3, E = M/3); Fe3+ → Fe2+ (Fe2O3: n = 2, E = M/2); V2O5: n = 6, E = M/6; FeO: n = 1, E = M.
So (a) is not correct (2 mol VO needs 3 mol Fe2O3), (b) is correct, (c) is correct, and in (d) the equivalent mass of FeO is M, not 2M/3.
Corrected: the book's key lists (b), (c), (d); with the question as printed ('not correct') the incorrect statements are (a) and (d).
Teacher's Note: Balance the redox reaction and find n-factor of each species.
Exam Note: Equivalent mass of FeO is M, as Fe changes by one unit.
Objective Question (More Than One Correct) 4. 1 mole of H3PO3 reacts with NaOH in solution. Select the correct statements:
(a) 1 mole of NaOH will replace N H+ ion from H3PO3
(b) 2 mole of NaOH will replace 2N H+ ions from H3PO3
(c) 3 mole of NaOH will replace 3N H+ ions from H3PO3
(d) On complete neutralisation of H3PO3, the equivalent mass of H3PO3 = 41
Solution. Answer: (a), (b), (d).
H3PO3 is dibasic, so only two H+ per molecule can be replaced: 1 mol NaOH replaces N, 2 mol replace 2N; a third mole of NaOH cannot replace more. Equivalent mass = 82/2 = 41.
Teacher's Note: Dibasic means a maximum of two replaceable H atoms.
Exam Note: Only the two O–H hydrogens are acidic.
Objective Question (More Than One Correct) 5. 100 mL of 0.8 M NaOH are used to neutralise 100 mL solution obtained by passing 2.70 g SO2Cl2 in water. Select the correct statement:
(a) The solution of SO2Cl2 has 0.2 M H2SO4 and 0.4 M HCl
(b) The volume ratio of NaOH used for H2SO4 and HCl is 1 : 2
(c) The volume ratio of NaOH used for H2SO4 and HCl is 1 : 1
(d) Molarity of SO2Cl2 solution is 0.1 M
Solution. Answer: (a), (c).
[SO2Cl2] = 2.70×1000/(135×100) = 0.2 M. SO2Cl2 + 2H2O → H2SO4 + 2HCl: 20 mmol gives 20 mmol H2SO4 (0.2 M, 40 meq) and 40 mmol HCl (0.4 M, 40 meq). Equal meq means a 1 : 1 NaOH volume ratio. Molarity of SO2Cl2 is 0.2 M, not 0.1 M.
Teacher's Note: Hydrolysis gives two acids; compare equivalents, not moles.
Exam Note: Meq of H2SO4 = Meq of HCl = 40.
Objective Question (More Than One Correct) 6. Which one are correct about the solution that contains 3.42 ppm Al2(SO4)3 and 1.42 ppm Na2SO4?
(a) [Al3+] = [Na+]
(b) [SO42-] = [Na+] = [Al3+]
(c) [SO42-] = [Na+] + [Al3+]
(d) [SO42-] = [Na+]
Solution. Answer: (a), (c).
3.42 ppm Al2(SO4)3 gives 2.88 ppm SO42- and 0.54 ppm Al3+; 1.42 ppm Na2SO4 gives 0.96 ppm SO42- and 0.46 ppm Na+. [Al3+] = 0.54×103/27×106 = 2.0×10-5 M; [SO42-] = (2.88 + 0.96)×103/96×106 = 4×10-5 M; [Na+] = 0.46×103/23×106 = 2×10-5 M. So [Al3+] = [Na+] and [SO42-] = [Na+] + [Al3+].
Teacher's Note: Convert ppm of each salt to ppm of ions, then to molarity.
Exam Note: Dilute solutions: 1 ppm ≈ 1 mg per litre.
Objective Question (More Than One Correct) 7. 1 u is equal to:
(a) 931.48 MeV
(b) 1.67×10-24 g
(c) (1/12)th mass of C12
(d) 1 dalton
Solution. Answer: (a), (b), (c), (d).
1 u = 1 amu = 1 dalton = 1/12 of the mass of a C-12 atom = 1.66×10-24 g = 931.48 MeV. (amu is now written as u.)
Teacher's Note: All options are different expressions for the atomic mass unit.
Exam Note: 1 u ≈ 1.66×10-27 kg.
Objective Question (More Than One Correct) 8. 1/NA is equal to:
(a) 1.67×10-27 kg
(b) 1 u
(c) 1 dalton
(d) Logschmidt number
Solution. Answer: (a), (b), (c).
1/NA g = 1.66×10-24 g = 1.66×10-27 kg = 1 u = 1 dalton. The Loschmidt number is the number of molecules of a gas in 1 mL at STP: NA/22400 = 2.689×1019, which is different.
Teacher's Note: One atom of unit mass: 1 g divided by NA.
Exam Note: Loschmidt number is not NA.
Objective Question (More Than One Correct) 9. H3BO3 is:
(a) Monobasic acid
(b) Lewis acid
(c) Electron pair acceptor
(d) Na3BO3 exist as ionic compound
Solution. Answer: (a), (b), (c), (d).
All the statements are facts: H3BO3 accepts OH- (electron pair), making it a monobasic Lewis acid, and the salt Na3BO3 exists.
Teacher's Note: Boric acid acts as a Lewis acid, not a proton donor.
Exam Note: Recall boric acid behaviour in water.
Objective Question (More Than One Correct) 10. Which of the following are primary standard solution?
(a) Oxalic acid
(b) NaOH
(c) Borax
(d) Na2CO3·10H2O
Solution. Answer: (a), (c), (d).
A standard solution of NaOH cannot be prepared by weighing because it reacts with CO2 and moisture of air. Oxalic acid, borax and Na2CO3·10H2O can be weighed accurately.
Teacher's Note: Primary standards are stable, pure and not hygroscopic.
Exam Note: NaOH is hygroscopic and absorbs CO2.
(a) Graph (a)
(b) Graph (b)
(c) Graph (c)
(d) Graph (d)
Solution. Answer: (a), (b), (c).
Mole of solute and molality do not change with temperature (graphs a and b are flat). Mole fraction of solute decreases with dilution (graph c). Mole fraction of solvent changes (increases) with dilution, so a flat line (d) is wrong.
Teacher's Note: Mass- and mole-based quantities are temperature independent; ratios change on dilution.
Exam Note: Mole fraction of solvent rises on dilution.
Comprehension Based Problems
Comprehension 1. Estimation of N in a compound is made by Kjeldahl's method. A sample containing 0.4775 g of (NH4)2C2O4 and inert materials was dissolved in water and made strongly alkaline with KOH, which converted NH4+ to NH3. The liberated ammonia was distilled into exactly 50.0 mL of 0.05035 M H2SO4. The excess H2SO4 was back titrated with 11.3 mL of 0.1214 M NaOH. [Molar mass of (NH4)2C2O4 = 124.10 and atomic mass of N = 14.00]
[1] Per cent of (NH4)2C2O4:
(a) 10.74
(b) 47.8
(c) 12.74
(d) 42.8
[2] Per cent of N in sample:
(a) 47.8
(b) 40.8
(c) 42.8
(d) 10.74
Solution. [1] Answer: (b) 47.8. Meq of NH3 = Meq of H2SO4 used = 0.05035×2×50 − 11.3×0.1214 = 5.035 − 1.372 = 3.663. Meq of oxalate salt = 3.663 gives (w/(124.10/2))×1000 = 3.663, w = 0.2273 g, so % = 0.2273/0.4775 × 100 = 47.6, closest to 47.8 (the book prints 47.8).
[2] Answer: (d) 10.74. (w/14)×1000 = 3.663 gives wN = 0.0513 g; % N = 0.0513/0.4775 × 100 = 10.74.
Teacher's Note: Back titration: acid consumed by ammonia equals acid taken minus alkali used.
Exam Note: Meq of NH3 equals Meq of nitrogen.
Comprehension 2. 50 mL of a solution, containing 1 g each of Na2CO3, NaHCO3 and NaOH was titrated with N HCl. What will be the titre readings if:
[1] Only phenolphthalein is used as indicator?
(a) 21.3 mL
(b) 55.8 mL
(c) 34.4 mL
(d) 68.4 mL
[2] Only methyl orange is used as indicator from the very beginning?
(a) 55.8 mL
(b) 21.3 mL
(c) 34.4 mL
(d) 68.4 mL
[3] Methyl orange is added after the first end point with phenolphthalein?
(a) 21.3 mL
(b) 55.8 mL
(c) 34.4 mL
(d) 68.4 mL
Solution. [1] Answer: (c) 34.4 mL. Phenolphthalein end point uses all NaOH and half of Na2CO3: (1/40)×1000 + ½(1/53)×1000 = 25 + 9.43 = V1 × 1, so V1 = 34.4 mL.
[2] Answer: (a) 55.8 mL. Methyl orange from the start uses all equivalents: 25 + 18.87 + 11.90 = V2, so V2 = 55.8 mL.
[3] Answer: (a) 21.3 mL. After the first end point, methyl orange consumes the other half of Na2CO3 and all NaHCO3: ½(1/53)×1000 + (1/84)×1000 = 9.43 + 11.90 = 21.3 mL.
Teacher's Note: Phenolphthalein stops at HCO3-; methyl orange at CO2.
Exam Note: Use E = 40, 53 and 84 for the three bases.
Comprehension 3. HNO3 used as a reagent has specific gravity of 1.42 g mL-1 and contains 70% by strength HNO3.
[1] Normality of acid is:
(a) 16.78
(b) 15.78
(c) 14.78
(d) 17.78
[2] Volume of acid that contains 63 g pure acid is:
(a) 100 mL
(b) 40.24 mL
(c) 63.38 mL
(d) 70.68 mL
[3] Volume of water required to make 1 N solution from 2 mL conc. HNO3:
(a) 29.56 mL
(b) 30.56 mL
(c) 28.56 mL
(d) 31.56 mL
Solution. [1] Answer: (b) 15.78. 70 g HNO3 in 100 mL: N = (70×1.42/63)/(100/1000) = 15.78.
[2] Answer: (c) 63.38 mL. 70×1.42 g acid is in 100 mL, so 63 g is in 100×63/(70×1.42) = 63.38 mL.
[3] Answer: (a) 29.56 mL. Meq is constant on dilution: 2 × 15.78 = V × 1, V = 31.56 mL, so water added = 31.56 − 2 = 29.56 mL.
Teacher's Note: Strength percent by volume and specific gravity give normality; then N1V1 = N2V2.
Exam Note: Volume of water added is final minus 2 mL.
Comprehension 4. The density of 3 M solution of Na2S2O3 is 1.25 g mL-1.
[1] The % by mass of Na2S2O3 is:
(a) 36.24
(b) 37.92
(c) 40.24
(d) 38.34
[2] Mole fraction of Na2S2O3 is:
(a) 0.015
(b) 0.025
(c) 0.065
(d) 0.035
[3] Molalities of Na+ and S2O32- ions are respectively:
(a) 7.732, 3.866
(b) 3.866, 7.732
(c) 3.732, 7.866
(d) 7.866, 3.732
Solution. [1] Answer: (b) 37.92. 1 L of solution has 3 mol = 3×158 = 474 g Na2S2O3 in 1250 g solution, so water = 776 g. % = 474/1250 × 100 = 37.92.
[2] Answer: (c) 0.065. Mole fraction = 3/(3 + 776/18) = 0.065.
[3] Answer: (a) 7.732, 3.866. Molality of Na+ = 6×1000/776 = 7.732; of S2O32- = 3×1000/776 = 3.866.
Teacher's Note: Use 1 L of solution as basis; density gives mass, subtraction gives water.
Exam Note: Each formula unit gives two Na+.
Comprehension 5. Oxides of non metals are acidic although N2O, NO, CO and H2O are neutral. On the other hand oxides of metals are either amphoteric or basic. However in higher oxidation state same metals forms acidic oxides.
[1] Which is used for absorbing CO:
(a) Amm. AgNO3
(b) Amm. Cu2Cl2
(c) Turpentine oil
(d) Pyrogallol
[2] SO2 can be absorbed in:
(a) Lime water
(b) Baryta water
(c) KOH
(d) All of these
[3] Acetylene can be absorbed in:
(a) Amm. AgNO3
(b) H2SO4
(c) NaOH
(d) Na2CO3
Solution. [1] Answer: (b) Amm. Cu2Cl2. Ammoniacal Cu2Cl2 absorbs carbon monoxide (a known fact).
[2] Answer: (d) All of these. SO2 is an acidic oxide and reacts with all these bases.
[3] Answer: (a) Amm. AgNO3. Acetylene forms silver acetylide: CH≡CH + AgNO3 → AgC≡CAg (in ammoniacal solution).
Teacher's Note: Pick absorbents by chemical behaviour: acidic gases by bases, alkynes by metal salts.
Exam Note: Recall gas-absorption reagents from gas analysis.
Statement and Explanation Problems
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is the correct explanation of S; (d) both S and E are correct but E is not the correct explanation of S.
Statement-Explanation Question 1. S: Equivalent mass of H3BO3 and Na3BO3 are M/3.
E: Equivalent mass of H3BO3 is M/1 and Na3BO3 is M/3.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (b). H3BO3 is monobasic (E = M/1) while Na3BO3 is a salt with total charge 3 on cation (E = M/3). So S is wrong and E is correct.
Teacher's Note: Boric acid is monobasic; the sodium salt has total charge 3.
Exam Note: Compare n-factors of acid and salt.
Statement-Explanation Question 2. S: 1 equivalent of H2SO4 contains 1 equivalent of H, S and O each.
E: A species contains same number of equivalents of its components.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (c). Equivalents react in equal number, so one equivalent of a compound contains one equivalent of each component. E explains S.
Teacher's Note: Equivalents of a compound equal equivalents of each part.
Exam Note: Equal-equivalent rule explains the statement.
Statement-Explanation Question 3. S: Equivalent mass of ozone in the change O3 → O2 is 8.
E: 1 mole of O3 on decomposition gives 3/2 mole of O2.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (d). 2O3 → 3O2: 2 mol O3 = 3 mol O2 = 3×4 eq. Equivalent mass of O3 = 48/6 = 8. Both true, but the mole relation is not the explanation of equivalent mass.
Teacher's Note: Equivalent mass of O3 is based on 6 equivalents per 2 mol.
Exam Note: Both facts; E is not the reason.
Statement-Explanation Question 4. S: CO and C2H2 both can be absorbed in ammoniacal CuCl.
E: CH4 is absorbed on animal charcoal.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (d). Both are facts, but unrelated.
Teacher's Note: Recall gas absorption reagents.
Exam Note: Statement and explanation are separate facts.
Statement-Explanation Question 5. S: Acidimetry and alkalimetry are the terms used in volumetric analysis.
E: The reactant left after the chemical reaction is called limiting reagent.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (a). S is correct. E is wrong: the reactant used up completely is the limiting reagent; the one left is in excess.
Teacher's Note: The limiting reagent is consumed completely.
Exam Note: Excess reagent is what is left over.
Statement-Explanation Question 6. S: NaNO3 has no definite molecule.
E: Its formula mass is 85.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (d). NaNO3 has a solid (ionic) lattice and no discrete molecule; its formula mass is 85. Both true, E is not the explanation.
Teacher's Note: Ionic solids have formula mass, not molecular mass.
Exam Note: Both statements true but unrelated.
Statement-Explanation Question 7. S: 31.26 mL of 0.165 M solution of Ba(OH)2 is exactly neutralised by 25 mL of citric acid C6H8O7 of molarity 0.138.
E: The acid is tribasic in nature.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (c). Meq of Ba(OH)2 = Meq of acid: 31.26×0.165×2 = 25×0.138×n, so n = 3. The tribasic nature explains the statement.
Teacher's Note: Equate Meq to find basicity.
Exam Note: Meq equality gives n = 3.
Statement-Explanation Question 8. S: 1 equivalent of K2Cr2O7 has 1 equivalent of K, Cr and O each.
E: Equivalent and milliequivalent react in equal number to give same equivalent of product.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (c). Equivalents of a compound contain equal equivalents of components, and equivalents react in equal number; E explains S.
Teacher's Note: Same equal-equivalent principle as Q2.
Exam Note: Equivalents combine in equal number.
Statement-Explanation Question 9. S: The H-bonding of NH3 and H2O is represented as: H–O···H–N–H (with one H on O and two H on N, i.e. O of water bonded to a hydrogen of NH3).
E: H2O is more acidic than NH3 and thus, H2O is a proton donor.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (b). The correct hydrogen bond is H–O–H···N–H (H of water bonded to N of ammonia) since water is the proton donor. S is wrong, E is correct.
Teacher's Note: The more acidic partner donates H in an H-bond.
Exam Note: Water donates H to ammonia's nitrogen.
Statement-Explanation Question 10. S: H3BO3 is monobasic Lewis acid but salt Na3BO3 exist.
E: H3BO3 reacts with NaOH to give Na3BO3.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (a). S is correct. E is wrong: B(OH)3 + NaOH → Na[B(OH)4].
Teacher's Note: Boric acid accepts OH- instead of donating H+.
Exam Note: Product is Na[B(OH)4].
Statement-Explanation Question 11. S: Av. No. was proposed 6.019×1023 on O-16 scale and 6.02×1023 on C-12 scale.
E: The numerical value of Avogadro's number depends upon the atomic mass scale.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (c). The numerical value changes with the atomic mass scale used, so E explains S.
Teacher's Note: Avogadro's number depends on the reference mass scale.
Exam Note: Scale change alters the mole definition.
Statement-Explanation Question 12. S: Atomicity of phosphorus is four.
E: Atomicity is the number of atoms present in 1 molecule.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (c). White phosphorus is P4 and atomicity is atoms per molecule; E explains S.
Teacher's Note: Atomicity equals atoms per molecule.
Exam Note: P4 has atomicity four.
Statement-Explanation Question 13. S: Density = specific gravity × 0.99823 at 20°C.
E: Density = specific gravity at 4°C.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (d). Both are facts (water density is 0.99823 g mL-1 at 20°C and 1.000 at 4°C), but E does not explain S.
Teacher's Note: Specific gravity is relative to water; density multiplies by water's density.
Exam Note: Water's density varies with temperature.
Statement-Explanation Question 14. S: Density is expressed as g mL-1 whereas specific gravity is dimension less.
E: Specific gravity is ratio of the masses of solution and solvent.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (c). Specific gravity is a ratio of equal volumes' masses, hence dimensionless; E explains S.
Teacher's Note: A ratio of like quantities has no unit.
Exam Note: Specific gravity is a ratio.
Statement-Explanation Question 15. S: In the titration of Na2CO3 with HCl using methyl orange indicator, the volume of acid required is twice that of the acid required using phenolphthalein as indicator.
E: Two moles of HCl are required for the complete neutralisation of one mole of Na2CO3.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (d). Phenolphthalein: Na2CO3 + HCl → NaHCO3 + NaCl (1 mol HCl); methyl orange: Na2CO3 + 2HCl → 2NaCl + H2O + CO2 (2 mol HCl). Both true, but E alone does not explain the doubling.
Teacher's Note: Phenolphthalein sees half neutralisation of carbonate.
Exam Note: Methyl orange needs twice the HCl.
Statement-Explanation Question 16. S: Sulphate is estimated as BaSO4 and not as MgSO4.
E: Ionic radius of Mg2+ is smaller than Ba2+.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (d). Both are facts; the reason for the choice is that BaSO4 is insoluble, not the ionic radius.
Teacher's Note: Gravimetric analysis needs an insoluble precipitate.
Exam Note: Insolubility, not ionic size, is the reason.
Statement-Explanation Question 17. S: Atomic masses of most of the elements are fractional.
E: Atomic mass = ΣMX/100; where M is mass of isotope and X is its % abundance.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (c). Atomic mass is the abundance-weighted average of isotopic masses, giving fractional values; E explains S.
Teacher's Note: Weighted average of isotopes gives fractional mass.
Exam Note: Average over isotopic abundance.
Statement-Explanation Question 18. S: Analytical molarity of 1 M HCl is zero.
E: Equilibrium molarity of 1 M HCl is zero.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (b). HCl → H+ + Cl-: initial 1, after dissociation 0, 1, 1. Equilibrium molarity of HCl is zero but analytical molarity is 1. S is wrong, E correct.
Teacher's Note: Analytical molarity is what was dissolved.
Exam Note: Strong acid leaves zero undissociated HCl.
Statement-Explanation Question 19. S: Equivalence point is a theoretical value.
E: End point is an experimental value.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (d). Both are facts, but E does not explain S.
Teacher's Note: Equivalence point is calculated; end point is observed.
Exam Note: End point differs slightly from equivalence point.
Statement-Explanation Question 20. S: Actual yield in case of most of the reactions is lesser than theoretical yield.
E: The reactants are either not 100% pure or some side reactions follows.
Choose the correct code (a), (b), (c) or (d).
Solution. Answer: (c). Impure reactants and side reactions reduce yield; E explains S.
Teacher's Note: Impurities and side reactions lower yield.
Exam Note: Percentage yield is usually below 100.
Matching Type Problems
| Concentration | Property |
|---|---|
| A. Molality | a. Ionic solute |
| B. Ionic strength | b. Very low concentration |
| C. ppb | c. ½ΣcZ2 |
| D. Formality | d. Independent of temperature |
Solution. A–d, B–c, C–b, D–a. Molality uses masses so it is temperature independent; ionic strength is ½ΣcZ2; ppb is a very low concentration; formality is used for ionic solutes.
Teacher's Note: Match each unit with its defining property.
Exam Note: Formality is used for ionic solids.
| List-A (Gases) | List-B (Adsorbents) |
|---|---|
| A. Cl2 | a. FeSO4 solution |
| B. O3 | b. Alkaline pyrogallol |
| C. NO | c. Turpentine oil |
| D. CO | d. NaOH(aq) or KOH(aq) |
| E. O2 | e. Amm. CuCl2 (as printed) |
Solution. A–d, B–c, C–a, D–e, E–b. Cl2 is absorbed by alkali, O3 by turpentine oil, NO by FeSO4, CO by ammoniacal cuprous chloride, O2 by alkaline pyrogallol.
Teacher's Note: Gas analysis uses specific absorbents for each gas.
Exam Note: Ammoniacal Cu2Cl2 absorbs CO.
| Substance | Method |
|---|---|
| A. Gases | a. Victor Meyer's method |
| B. Volatile liquids | b. Hofmann's method |
| C. Non volatile solids | c. Duma's method |
| D. Solids of low m. mass | d. Ebullioscopy or cryoscopy |
| E. Solids of high m. mass such as polymers | e. Osmotic pressure |
| f. Raoult's law |
Solution. As printed in the book's answer key: A–a, b, c; B–a, b, c, f; C–d, e, f; D–d, f; E–e.
Teacher's Note: Vapour methods suit volatile substances; colligative methods suit non-volatile solutes.
Exam Note: Polymers need osmotic pressure.
| List A | List B |
|---|---|
| A. 1.8 mL H2O(l) (d = 1 g/mL) | a. (1/10)NA molecules of H2O |
| B. 1.8 mL H2O(v) at STP | b. 2.24 litre at STP H2O(v) |
| C. 8.03×10-5 mole H2O(v) | c. 1.8 g of H2O(l) |
| d. 1.446×10-3 g H2O | |
| e. 4.84×1019 molecules of H2O |
Solution. A–a, b, c; B–d, e; C–d, e.
A: 1.8 mL liquid = 1.8 g = 0.1 mol = (1/10)NA molecules = 2.24 L as vapour at STP. B: 1.8 mL vapour at STP = 1.8×10-3/22.4 = 8.03×10-5 mol = 1.446×10-3 g = 4.84×1019 molecules. C: 8.03×10-5 mol is the same amount as B.
Teacher's Note: Convert each quantity to moles, then compare.
Exam Note: 1.8 mL of vapour at STP is tiny, unlike liquid.
| List A (Concentrations expressed in) | List B (Factors influencing) |
|---|---|
| A. Molarity | a. Temperature |
| B. Molality | b. Dilution |
| C. Mole fraction of solute | c. Addition of solute |
| D. Strength of solution |
Solution. A–a, b, c; B–b, c; C–b, c; D–a, b, c. Molarity and strength depend on volume (temperature), dilution and added solute; molality and mole fraction are mass- and mole-based, so temperature does not affect them.
Teacher's Note: Volume-based units change with temperature.
Exam Note: Mass-based units ignore temperature.
| List A (Adsorbent) | List B (Gases) |
|---|---|
| A. Lime water | a. SO2 |
| B. Conc. H2SO4 | b. H2S |
| C. Heated Mg | c. H2O(v) |
| d. NH3 | |
| e. O2 | |
| f. N |
Solution. A–a, b; B–c, d; C–e, f. Lime water absorbs acidic gases SO2 and H2S; conc. H2SO4 absorbs water vapour and ammonia; heated magnesium combines with oxygen and nitrogen.
Teacher's Note: Choose absorbent by gas character: acidic, basic, or reactive.
Exam Note: N in List B means N2.
P Bahadur Solutions for JEE Mathematics: P Bahadur Solutions Numerical Chemistry Chapter 2 Mole Concept Equivalent Concept
Complete Math Solutions for P Bahadur Solutions Numerical Chemistry Chapter 2 Mole Concept Equivalent Concept
Explore reliable mathematical solutions for P Bahadur Solutions Numerical Chemistry Chapter 2 Mole Concept Equivalent Concept tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Step-by-Step Mathematical Explanations
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Additional Study Materials for 2026
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.