P Bahadur Solutions Numerical Chemistry Chapter 18 Quantitative Estimations

Step-by-Step P Bahadur Solutions for JEE Chemistry Chapter 18 Quantitative Estimations

Explore reliable textbook solutions for Chapter 18 Quantitative Estimations tailored for JEE learners using P Bahadur methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Download Chapter 18 Quantitative Estimations Textbook Solutions PDF

View or download the dedicated Chapter 18 Quantitative Estimations solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

Chapter 18 Quantitative Estimations - Numerical Problems 1 to 27

Numerical Problems

Question 1. An O.C. contains C = 40%, H = 6.6% and rest oxygen. Find out empirical formula of O.C.

Solution.

Element%Relative no. of atomsSimplest ratio
C4040/12 = 3.333.33/3.33 = 1
H6.66.6/1 = 6.66.6/3.33 = 2
O100 − (40 + 6.6) = 53.453.4/16 = 3.333.33/3.33 = 1

∴ Empirical formula is CH2O.

Teacher's Note: Oxygen is found by difference; divide each percentage by atomic mass, then by the smallest value.

Exam Note: Show the ratio table; write the final formula.

Question 2. A volatile organic compound on analysis following Victor Meyer's experiment gave as: Mass of organic compound = 0.1133 g; Volume of air displaced = 22.8 mL; Temperature = 15°C; Pressure = 750 mm; Vapour pressure of H2O at 15°C = 13 mm. Calculate vapour density and molar mass of compound.

Solution.

Pressure of dry air displaced = 750 − 13 = 737 mm. Organic compound occupies the same volume in gaseous phase as air displaced.

PV = (w/M)RT

(737/760) × (22.8/1000) = (0.1133/M) × 0.0821 × 288

∴ M = 121.16 g mol−1

Vapour density = molar mass/2 = 121.16/2 = 60.58

Teacher's Note: Air is collected over water, so subtract aqueous tension from total pressure before using PV = wRT/M.

Exam Note: Subtract water vapour pressure; convert mm to atm.

Question 3. A Duma's bulb full of air weighs 22.567 g at 20°C and 755 mm pressure. Full of vapours of a substance at 120°C and 755 mm pressure it weighs 22.8617 g. The capacity of bulb is 200 mL. Find the molar mass of substance. The density of air is 0.00129 g/mL.

Solution.

Assume mass of bulb = w′. Molar mass of air = 0.00129 × 22400 = 28.90.

For air: PV = (w/M)RT, with P = 755/760 atm, V = 200/1000 litre, T = 293 K:

(755/760) × (200/1000) = [(22.567 − w′)/28.90] × 0.0821 × 293 ∴ w′ = 22.3282 g

For vapours: mass of vapours = 22.8617 − 22.3282 = 0.5335 g; P = 755/760 atm, V = 200 mL, T = 393 K.

(755/760) × (200/1000) = (0.5335/M) × 0.0821 × 393 ∴ M = 86.64 g mol−1

Teacher's Note: First find the empty-bulb mass from the air filling, then the vapour mass by subtraction.

Exam Note: Do not forget the bulb's own mass.

Question 4. During Hofmann's experiment 0.2 g of an unknown compound is vaporized under reduced pressure 70 cm at 127°C and occupies 20 mL. Calculate molar mass of compound.

Solution.

P = 70/76 atm, V = 20/1000 litre, T = 400 K, w = 0.2 g

PV = (w/M)RT ⟹ (70/76) × (20/1000) = (0.2/M) × 0.0821 × 400

∴ M = 356.55 g mol−1

Teacher's Note: Hofmann's method gives vapour volume at reduced pressure; pressure in cm Hg is converted to atm by dividing by 76.

Exam Note: Convert cm Hg to atm, °C to K.

Question 5. Combustion of 0.42 g of a compound gave 0.924 g CO2 and 0.243 g H2O. Due to distillation of 0.208 g of the compound with NaOH, ammonia evolved required 30 mL of N/20 H2SO4 for complete neutralization. Calculate the percentage composition of compound.

Solution.

% C = (12/44) × (mass of CO2/mass of compound) × 100 = (12/44) × (0.924/0.42) × 100 = 60%

% H = (2/18) × (0.243/0.42) × 100 = 6.43%

% N = 1.4 × NV/W = 1.4 × (1/20) × 30/0.208 = 10.09%

% O = 100 − [% C + % H + % N] = 100 − [60 + 6.43 + 10.09] = 23.48%

∴ C = 60%, H = 6.43%, N = 10.09%, O = 23.48%

Teacher's Note: Combustion and Kjeldahl portions are different weighed samples, so each uses its own mass; oxygen by difference.

Exam Note: Use the correct sample mass for each element.

Question 6. 0.607 g of silver salt of a tribasic acid gave on combustion 0.37 g pure Ag. Calculate the molar mass of acid.

Solution.

Meq. of silver salt = Meq. of silver ⟹ (0.607/E) × 1000 = (0.37/108) × 1000

∴ Eq. mass of silver salt = 177.2

Tribasic acid, so valence = 3 ∴ molar mass of silver salt = 177.2 × 3 = 531.6

Molar mass of acid = 531.6 − 3 × atomic mass of Ag + 3 × atomic mass of H = 531.6 − 3 × 108 + 3 = 210.6

Teacher's Note: Silver salt method: replace each Ag by H; multiply equivalent mass by basicity first.

Exam Note: Basicity multiplies equivalent mass; swap 3Ag for 3H.

Question 7. An organic compound gave the following data: 0.236 g yielded 0.528 g CO2 and 0.324 g H2O on combustion. 0.295 g of the compound gave 56 mL N2 at NTP. The compound is a monoacid base. It's platinic chloride salt contains 36.93% platinum. Calculate the molecular formula of compound.

Solution.

% C = (12/44) × (0.528/0.236) × 100 = 61.02% (book prints 61.07%)

% H = (2/18) × (0.324/0.236) × 100 = 15.25%

% N = 28 × 56 × 100/(22400 × 0.295) = 23.73%

Element%Relative no. of atomsSimplest ratio
C61.025.093
H15.2515.259
N23.731.6951

∴ Empirical formula is C3H9N; empirical formula mass = 59.

Equivalent mass of base = ½[(x/a) × 195 − 410], where x = mass of platinic chloride salt = 100, a = mass of Pt residue = 36.93:

= ½[(100 × 195/36.93) − 410] = 59

∴ Molar mass of base = 59 × acidity = 59 × 1 = 59 (monoacid base). ∴ Molecular formula = C3H9N

Corrected: only the carbon percentage, printed as 61.07%, was recalculated as 61.02%; the ratio and the answer are unchanged.

Teacher's Note: Platinic chloride method: Eq. mass of base = ½[(x/a)·195 − 410]; N is estimated from a separate sample.

Exam Note: Quote the platinic chloride formula; check n = 1.

Question 8. 0.32 g of organic compound containing sulphur on treatment with conc. HNO3 in a Carius tube and then with excess of BaCl2 produced 0.233 g of BaSO4. Determine % of S in compound.

Solution.

% of S = (32 × mass of BaSO4)/(233 × mass of O.C.) × 100 = (32 × 0.233)/(233 × 0.32) × 100 = 10%

Teacher's Note: Carius method: all sulphur is precipitated as BaSO₄ (molar mass 233, S = 32).

Exam Note: Write the Carius formula, then substitute.

Question 9. In Kjeldahl's method, the gas evolved from 1.325 g sample of a fertilizer is passed into 50.0 mL of 0.2030 N H2SO4, 25.32 mL of 0.1980 N NaOH are required for the titration of unused acid. Calculate the percentage of nitrogen in fertilizer. (Roorkee 1991)

Solution.

Meq. of H2SO4 taken to absorb NH3 = 50 × 0.2030

Meq. of H2SO4 left after NH3 absorption = Meq. of NaOH used = 25.32 × 0.1980

∴ Meq. of H2SO4 used for NH3 = (NV) = 50 × 0.2030 − 25.32 × 0.1980 = 5.137

% N = 1.4 × NV/mass of substance = 1.4 × 5.137/1.325 = 5.43%

Teacher's Note: Back titration: acid consumed by ammonia = acid taken minus acid left (NaOH).

Exam Note: Subtract unused acid; apply 1.4 × NV/W.

Question 10. A non-volatile hydrocarbon has 5.6% hydrogen. When 3.0 g of hydrocarbon is dissolved in 100 g of benzene, the relative lowering vapour pressure of benzene is 1.306 × 10−2 Nm−2. Determine the molecular formula of non-volatile hydrocarbon. (Punjab CET 1996)

Solution.

(i) Molar mass from Raoult's law: (P° − Ps)/P° = (w/m)/(w/m + W/M)

1.306 × 10−2 = (3/m)/(3/m + 100/78) ∴ m = 176.83

(ii) Empirical formula:

Element%Relative no. of atomsSimplest ratio
C94.57.881.40 or 7
H5.65.601.0 or 5

∴ Empirical formula is C7H5; empirical formula mass = 89.

n = 176.83/89 = 2 ∴ Molecular formula = (C7H5)2 = C14H10

Teacher's Note: Raoult's law gives molar mass; ratio 1:1.4 is scaled by 5 to get whole numbers.

Exam Note: Scale fractional ratios; n = molar mass/empirical mass.

Question 11. A sample of gaseous hydrocarbon occupying 1.12 litre at NTP, completely burnt in air and produced 2.2 g of CO2 and 1.8 g H2O. Calculate the mass of compound taken and volume of O2 at NTP required for its burning. Also determine molecular formula of hydrocarbon.

Solution.

1.12 litre of hydrocarbon = 1.12/22.4 = 0.05 mol; mole of CO2 = 2.2/44 = 0.05; mole of H2O = 1.8/18 = 0.10

Let the hydrocarbon be CaHb: CaHb + (a + b/4)O2 → aCO2 + (b/2)H2O

0.05 mol gives 0.05a mol CO2 = 0.05 ∴ a = 1; 0.05 × (b/2) = 0.10 ∴ b = 4. Hydrocarbon is CH4.

Mass of 1.12 L CH4 at STP = 16 × 1.12/22.4 = 0.8 g

CH4 + 2O2 → CO2 + 2H2O: 0.05 mol CH4 requires 2 × 32 × 0.05 = 3.2 g O2 = 2.24 litre O2

Teacher's Note: Mole ratio of CO₂ and H₂O to the hydrocarbon directly gives carbon and hydrogen counts.

Exam Note: Give mass, O₂ volume and formula, all three.

Question 12. An aromatic monobasic acid contains 68.87% C and 4.9% H. 0.610 g of the acid required 25 mL of M/10 diacidic base for neutralization. What is molecular formula of acid?

Solution.

Element%Relative no. of atomsSimplest ratio
C68.875.743.5 or 7
H4.94.93.0 or 6
O26.231.641.0 or 2

∴ Empirical formula is C7H6O2; empirical formula mass = 122.

Meq. of acid = Meq. of alkali: (0.610/(M/1)) × 1000 = 25 × (1/10) × 2 ∴ M = 122 g mol−1

n = 122/122 = 1 ∴ Molecular formula = (C7H6O2)1 = C7H6O2

Teacher's Note: Volumetric method: monobasic acid, so equivalent mass equals molar mass; diacidic base doubles its normality.

Exam Note: Normality of M/10 diacidic base is 0.2 N.

Question 13. The freezing point constant of C6H6 is 4.90 K mol−1 kg and its melting point is 5.51°C. A solution of 0.816 g of compound (A) when dissolved in 7.5 g of C6H6 freezes at 1.59°C. The compound (A) has C = 70.58% and H = 5.88%. Determine the molar mass and molecular formula of (A).

Solution.

ΔT = 5.51 − 1.59 = 3.92°C

(i) Molar mass of (A) = (1000 Kf × w)/(ΔT × W) = (1000 × 4.9 × 0.816)/(7.5 × 3.92) = 136

(ii) Empirical formula:

Element%Relative no. of atomsSimplest ratio
C70.5870.58/12 = 5.885.88/1.47 = 4
H5.885.88/1 = 5.885.88/1.47 = 4
O100 − (70.58 + 5.88) = 23.5423.54/16 = 1.471.47/1.47 = 1

Empirical formula is C4H4O; empirical formula mass = 68. n = 136/68 = 2.

∴ Molecular formula of (A) = (C4H4O)2 = C8H8O2

Teacher's Note: Cryoscopy gives molar mass; the percentage data gives the empirical formula; their ratio gives n.

Exam Note: ΔT is the fall from the pure solvent's freezing point.

Question 14. A monobasic organic acid gave on combustion the following % compositions: C = 39.9%; H = 6.69%. Also 0.2565 g of silver salt of acid gave on ignition 0.1659 g of Ag. Calculate molecular formula of acid.

Solution.

Element%Relative no. of atomsSimplest ratio
C39.93.321
H6.696.692
O100 − (39.9 + 6.69) = 53.413.341

Empirical formula of compound = CH2O; empirical formula mass = 30.

Meq. of Ag salt of monobasic acid = Meq. of Ag: (0.2565/E) × 1000 = (0.1659/108) × 1000 ∴ Molar mass of Ag salt (RCOOAg) = 167

Molar mass of acid (RCOOH) = 167 − 108 + 1 = 60

∴ Molecular formula = (CH2O)2 = C2H4O2 = CH3COOH

Teacher's Note: For a monobasic acid the silver salt's equivalent mass is its molar mass; subtract Ag, add H.

Exam Note: Silver salt method: M(acid) = M(salt) − 107.

Question 15. A carbon compound containing only carbon and oxygen has an approximate molar mass of 290 g mol−1. On analysis it is found to contain 50% by mass of each element. What is molecular formula of the compound?

Solution.

(1) Molar mass of compound = 290. (2) It contains equal masses of C and O, hence for 290 g: mass of C = 145 g, mass of O = 145 g.

g-atoms of C = 145/12 = 12; g-atoms of O = 145/16 = 9

∴ Molecular formula = C12O9

Teacher's Note: Because the molar mass is approximate, round the g-atom counts to whole numbers.

Exam Note: Round atom counts to nearest whole numbers.

Question 16. Compound of C, H and N contains the three elements in the ratio 9 : 1 : 3.5. If the molar mass is 108 g mol−1, calculate molecular formula.

Solution.

C : H : N :: 9 : 1 : 3.5 = 13.5

13.5 g contains 9 g atom of C/12, so 108 g contains (9/12) × (108/13.5) = 6 g atom of C.

g-atom of H in 1 mole = (1/1) × (108/13.5) = 8; g-atom of N in 1 mole = (3.5/14) × (108/13.5) = 2

∴ Molecular formula of compound is C6H8N2.

Teacher's Note: A mass ratio scaled to the molar mass directly gives grams of each element per mole.

Exam Note: Scale the mass ratio to 108 g first.

Question 17. An organic compound contains 69.4% C, 5.8% H. A sample of 0.303 g of this compound was analysed for nitrogen by Kjeldahl's method. The ammonia evolved was absorbed in 50 mL of 0.05 M H2SO4. The excess acid required 25 mL of 0.1 M NaOH for neutralisation. Determine molecular formula of the compound, if its molar mass is 121 g mol−1. Draw possible structures of this compound.

Solution.

(i) Meq. of NH3 evolved (NV) = Meq. of acid used for NH3 = 50 × 0.05 × 2 − 25 × 0.1 = 2.5

% N = 1.4 × NV/W = 1.4 × 2.5/0.303 = 11.55%

(ii)

Element%Relative no. of atomsSimplest ratio
C69.45.787
H5.85.87
N11.550.8251
O100 − 86.75 = 13.250.8281

(iii) Empirical formula = C7H7NO; empirical formula mass = 121. Molar mass = 121 g mol−1 ∴ Molecular formula is C7H7NO.

Possible structures (drawn in the book as benzene-ring compounds): benzamide, C6H5CONH2; benzaldoxime, C6H5CH=NOH; and the isomeric aminobenzaldehydes, H2N–C6H4–CHO (the book shows the ortho and para isomers).

Teacher's Note: Remember H₂SO₄ is diprotic: 0.05 M is 0.1 N. Oxygen is by difference.

Exam Note: Convert molarity to normality for H₂SO₄.

Question 18. An O.C., CxH2yOy was burnt with twice the oxygen needed for complete combustion to produce CO2 and H2O. The hot gases when cooled at 0°C and 1 atm pressure measured 2.24 litre. The water collected during cooling was 0.9 g. The vapour pressure of pure water at 20°C is 17.5 mm of Hg and it reduces by 0.104 mm when 50 g of organic compound is dissolved in 1000 g of water. What is organic compound?

Solution.

CxH2yOy + xO2 → xCO2 + yH2O

Since oxygen taken is 2x litre and thus x litre O2 is left at STP after reaction. Also x litre of CO2 is formed by 1 mole of O.C. ∴ 2x = 2.24, x = 1.12 litre CO2 = 1.12/22.4 = 0.05 mole CO2.

Mole of H2O formed (y) = 0.9/18 = 0.05 ∴ x : y = 0.05 : 0.05, so x = 1, y = 1, i.e., ratio of x and y.

∴ Empirical formula of O.C. = CH2O and empirical formula mass of O.C. = 30

Molar mass from Raoult's law: (P° − Ps)/Ps = (w/m) × (M/W), with P° − Ps = 0.104 mm and P° = 17.5 mm (Ps = 17.396):

0.104/17.396 = (50/m) × (18/1000) ∴ m = 150.5 g mol−1

∴ Molecular formula = (CH2O)n, n = 150.5/30 = 5 = C5H10O5

Teacher's Note: Leftover gas is CO₂ plus excess O₂ in equal moles; that gives x, while condensed water gives y.

Exam Note: Excess O₂ equals CO₂ moles here.

Question 19. A monoacid organic base gave the following data: (a) 0.2790 g of the base gave 0.7920 g CO2 and 0.1890 g H2O. (b) 0.1163 g of the base gave 14 mL of dry N2 at NTP. (c) 0.2980 g of platinic chloride left 0.0975 g Pt. Calculate the molecular formula of base.

Solution.

% C = 12 × 0.7920 × 100/(44 × 0.2790) = 77.42; % H = 2 × 0.1890 × 100/(18 × 0.2790) = 7.53; % N = 28 × 14 × 100/(22400 × 0.1163) = 15.05

Element%Relative no. of atomsSimplest ratio
C77.426.456
H7.537.537
N15.051.0751

∴ Empirical formula = C6H7N.

Molar mass by platinic chloride method: equivalent mass of base = ½[(x/a) × 195 − 410] = ½[(0.2980 × 195/0.0975) − 410] = 93

Molar mass = 93 × 1 = 93; n = 93/93 = 1 ∴ Molecular formula = C6H7N

Teacher's Note: Three separate experiments give C, H, N and the platinic chloride salt gives molar mass.

Exam Note: Use the platinic chloride salt mass as x.

Question 20. 0.2060 g of an organic compound on combustion gave 18.8 mL of moist nitrogen at 17°C and 756 mm pressure. If vapour tension at 17°C is 14.5 mm, find the percentage of nitrogen in compound.

Solution.

VN₂ = 18.8 mL; PN₂ = 756 − 14.5 = 741.5 mm; T = 273 + 17 = 290 K

P1V1/T1 = P2V2/T2 (at NTP): 741.5 × 18.8/290 = 760 × V/273 ∴ VN₂ at STP = 17.27 mL

% of N = 28 × 17.27 × 100/(22400 × 0.2060) = 10.5

Teacher's Note: Duma's method: subtract aqueous tension, reduce volume to NTP, then use 28 × V × 100/(22400 × W).

Exam Note: Moist nitrogen: subtract water vapour pressure first.

Question 21. The analysis of an organic compound gave the following data: (a) 0.4020 g gave 0.6098 g and 0.2080 g of CO2 and H2O respectively. (b) 1.01 g by Kjeldahl's method produced ammonia which was neutralized by 23.2 mL of N/2 HCl. (c) 0.1033 g of compound gave 0.2772 g BaSO4. (d) 0.1015 g when vaporized in Victor Meyer's apparatus displaced 27.96 mL of air at 15°C and 766 mm pressure. Calculate molecular formula (P′H₂O at 15°C = 16 mm).

Solution.

% C = 12 × 0.6098 × 100/(44 × 0.4020) = 41.37; % H = 2 × 0.2080 × 100/(18 × 0.4020) = 5.75; % S = 32 × 0.2772 × 100/(233 × 0.1033) = 36.85; % N = 1.4 × 23.2 × (1/2)/1.01 = 16.08

Element%Relative no. of atomsSimplest ratio
C41.3741.37/12 = 3.453
H5.755.75/1 = 5.755
S36.8536.85/32 = 1.151
N16.0816.08/14 = 1.151

∴ Empirical formula is C3H5NS; empirical formula mass = 87.

Molar mass M = wRT/PV = (0.1015 × 0.0821 × 288 × 1000 × 760)/(750 × 27.96) = 87 g mol−1 (P = 766 − 16 = 750 mm)

n = 87/87 = 1 ∴ Molecular formula is C3H5NS

Teacher's Note: Four experiments feed one formula; Victor Meyer pressure needs the aqueous tension subtracted (766 − 16).

Exam Note: N/2 HCl: milliequivalents = 23.2 × 0.5.

Question 22. An organic monoacid base has empirical formula C3H3NO. 0.0563 g of platinum was left from 0.1982 g of its platinate. Find the molecular formula and molar mass of base.

Solution.

Equivalent mass of base = ½[(x/a) × 195 − 410], where x is mass of PtCl4 salt and a is mass of Pt residue.

E = ½[(0.1982/0.0563) × 195 − 410] = 138.24

The base is monoacidic, thus molar mass = E × 1 = 138.24

Empirical formula mass (C3H3NO) = 36 + 3 + 14 + 16 = 69

∴ Molecular formula = (C3H3NO)2 = C6H6N2O2

Teacher's Note: Platinate method: equivalent mass times acidity gives molar mass; divide by 69 to find n.

Exam Note: Monoacid base: molar mass equals equivalent mass.

Question 23. Nitrobenzene is formed as the major product along with a minor product in the reaction of benzene with a hot mixture of nitric acid and sulphuric acid. The minor product consists of carbon : 42.86%, hydrogen : 2.40%, nitrogen : 16.67%, and oxygen : 38.07%. (i) Calculate the empirical formula of the minor product. (ii) When 5.5 g of minor product is dissolved in 45 g of benzene, the boiling point of the solution is 1.84°C higher than that of pure benzene. Calculate the molar mass of the minor product and determine its molecular and structural formula. (Molal elevation constant of benzene is 2.53 K kg mol−1). (IIT 1999)

Solution.

(i) C: 42.86/12 = 3.57 → 3; H: 2.40/1 = 2.40 → 2; N: 16.67/14 = 1.19 → 1; O: 38.07/16 = 2.38 → 2 (dividing by 1.19). ∴ Empirical formula is C3H2NO2; empirical formula mass = 84.

(ii) Molar mass = (1000 × Kb × w)/(ΔT × W) = (1000 × 2.53 × 5.5)/(1.84 × 45) = 168 g mol−1

∴ Molecular formula = (C3H2NO2)2 = C6H4N2O4, i.e., a dinitrobenzene: benzene ring carrying two NO2 groups (the book draws the 1,3-isomer, m-dinitrobenzene).

Teacher's Note: Ebullioscopy gives molar mass 168; n = 2 gives C₆H₄N₂O₄, dinitrobenzene (second nitration, meta).

Exam Note: Name the structure: m-dinitrobenzene.

Question 24. 0.15 g of an organic compound on estimation by Carius method gave 0.12 g of AgBr. What is the percentage of bromine in organic compound?

Solution.

% Br = (atomic mass of Br × mass of AgBr)/(molar mass of AgBr × mass of organic compound) × 100 = (80 × 0.12 × 100)/(188 × 0.15) = 34.04%

Teacher's Note: Carius method for halogens: percentage uses 80/188 as the bromine fraction in AgBr.

Exam Note: Use molar mass AgBr = 188.

Question 25. 0.147 g of an organic compound on estimation by Carius method gave 0.287 g of AgCl. What is the percentage of chlorine in organic compound?

Solution.

% Cl = (atomic mass of Cl × mass of AgCl)/(molar mass of AgCl × mass of organic compound) × 100 = (35.5 × 0.287 × 100)/(143.5 × 0.147) = 48.30%

Teacher's Note: Chlorine fraction in AgCl is 35.5/143.5 = 0.2474; multiply by AgCl mass.

Exam Note: Use molar mass AgCl = 143.5.

Question 26. A sample of 0.50 g of an organic compound was estimated by Kjeldahl's method. The ammonia evolved was absorbed in 50 mL of 0.5 M H2SO4. The residual acid required 60 mL of 0.5 M NaOH for neutralisation. Find out the % of nitrogen in organic compound.

Solution.

Meq. of H2SO4 taken = 50 × 0.5 × 2 = 50

Meq. of NaOH used after passing NH3 = 60 × 0.5 = 30

∴ Meq. of H2SO4 used for NH3 = 50 − 30 = 20 (NV)

% of N = 1.4 × NV/mass of organic compound = 1.4 × 20/0.5 = 56%

Teacher's Note: H₂SO₄ is diprotic, so 0.5 M means 1 N; NaOH is monoacidic so molarity equals normality.

Exam Note: Meq of H₂SO₄ = volume × M × 2.

Question 27. An organic compound contains 69% carbon and 4.8% hydrogen. If the remainder is oxygen calculate the mass of CO2 and H2O produced on complete combustion of its 0.2 g. Also calculate the mole of oxygen for complete combustion of one mole of this compound. Molar mass of organic compound is 122 g mol−1.

Solution.

% of carbon = (12/44) × (mass of CO2 produced/0.2) × 100 ⟹ 69 = (12/44) × (mass/0.2) × 100 ∴ Mass of CO2 formed = 69 × 44 × 0.2/(12 × 100) = 0.506 g

% of hydrogen: 4.8 = (2/18) × (mass of H2O/0.2) × 100 ∴ Mass of H2O formed = 4.8 × 18 × 0.2/(2 × 100) = 0.0864 g

Percentage analysis (C = 69%, H = 4.8%, O = 26.2) suggests the empirical formula and molecular formula of the organic compound is C7H6O2.

C7H6O2 + (15/2)O2 → 7CO2 + 3H2O

Thus, 1 mole of C7H6O2 requires 7.5 mole of oxygen for complete combustion.

Teacher's Note: Reverse the Liebig formulas to get CO₂ and H₂O masses; then balance combustion of C₇H₆O₂.

Exam Note: Balance O: 14 + 3 − 2 = 15 atoms.

P Bahadur Solutions for JEE Mathematics: P Bahadur Solutions Numerical Chemistry Chapter 18 Quantitative Estimations

Access JEE Mathematics Solutions

Review detailed solutions for JEE Mathematics. The P Bahadur Solutions Numerical Chemistry Chapter 18 Quantitative Estimations PDF provides comprehensive answers mapped to standard P Bahadur Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Next Steps in Your Mathematics Revision

In addition to these P Bahadur Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these P Bahadur Solutions for JEE Chemistry?

They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the P Bahadur JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these P Bahadur solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising P Bahadur JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.