P Bahadur Solutions Numerical Chemistry Chapter 16 Thermochemistry

P Bahadur Solutions for JEE Chemistry: Chapter 16 Thermochemistry

Review structured textbook solutions for JEE Chemistry Chapter 16 Thermochemistry prepared by P Bahadur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice JEE Chemistry Solutions: Chapter 16 Thermochemistry

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chapter 16 Thermochemistry - Numerical Problems and Objective Questions

Numerical Problems

Question 1. Heat of reaction for C6H12O6(s) + 6O2(g) → 6CO2(g) + 6H2O(v) at constant pressure is −651 kcal at 17°C. Calculate the heat of reaction at constant volume at 17°C.

Solution. ΔH = ΔU + ΔnRT. Given ΔH = −651 × 103 cal, R = 2 cal, T = 290 K, Δn = 6 + 6 − 6 = 6.
−651 × 103 = ΔU + 6 × 2 × 290
ΔU = −654480 cal = −654.48 kcal.
Note: for C6H12O6(s) + 6O2(g) → 6CO2(g) + 6H2O(v), Δn = moles of gaseous products − moles of gaseous reactants = 6 + 6 − 6 = 6.

Teacher's Note: Count only gaseous moles for Δn; water is vapour here, so it counts. Keep R in calories.

Exam Note: Show Δn and units; mixing R units loses marks.

Question 2. The reaction NH2CN(s) + (3/2)O2(g) → N2(g) + CO2(g) + H2O(l) is carried out in a bomb calorimeter and the heat liberated during the course of reaction was found to be −742.7 kJ mol−1 at 25°C. Calculate the heat of reaction at constant pressure at 25°C.

Solution. Δn = 2 − 3/2 = 1/2. Given ΔU = −742.7 kJ, R = 8.314 × 10−3 kJ, T = 298 K.
ΔH = ΔU + ΔnRT = −742.7 + (1/2) × 8.314 × 10−3 × 298 = −741.46 kJ.

Teacher's Note: A bomb calorimeter measures ΔU. Liquid water is ignored in Δn, so only N2, CO2 and O2 count.

Exam Note: Write Δn = +1/2 explicitly before substituting.

Question 3. The heat liberated on complete combustion of 7.8 g benzene is 327 kJ. This heat has been measured at constant volume and 27°C. Calculate heat of combustion of benzene at constant pressure at 27°C. (R = 8.3 J mol−1 K−1) (Roorkee 1996)

Solution. C6H6(l) + (15/2)O2(g) → 6CO2(g) + 3H2O(l); Δn = 6 − 15/2 = −3/2.
ΔU per mole = −327 × 78/7.8 = −3270 kJ.
ΔH = ΔU + ΔnRT = −3270 + (−3/2) × 8.3 × 300 × 10−3 = −3273.735 kJ.

Teacher's Note: Scale 7.8 g to one mole (78 g) first; then correct for Δn. The correction is small.

Exam Note: Convert per-gram heat to per-mole before applying ΔH = ΔU + ΔnRT.

Question 4. Two mole of CO and one mole of O2 are taken in a container of volume 1 litre to give 2 mole of CO2 according to the equation 2CO + O2 → 2CO2; ΔH = −560 kJ. The pressure in the vessel changes from initial pressure of 70 atm to 40 atm. Find out the magnitude of absolute value of ΔU at 500 K. The gases deviate appreciably from ideal gas behaviour. (1 L-atm = 0.1 kJ) (IIT 2006)

Solution. ΔH = ΔU + Δ(PV) = ΔU + P2V2 − P1V1 ...(1)
We cannot use ΔH = ΔU + ΔnRT here since gases deviate from ideal gas behaviour. Thus,
Δ(PV) = P2V2 − P1V1 = 40 × 1 − 70 × 1 = −30 litre-atm = −3.0 kJ
By Eq. (1): −560 = ΔU − 3.0, so ΔU = −557 kJ (magnitude 557 kJ).

Teacher's Note: For non-ideal gases use Δ(PV) from measured pressures, not ΔnRT. Here V is fixed at 1 L.

Exam Note: Use Δ(PV) directly; 1 L-atm = 0.1 kJ conversion matters.

Question 5. Determine the value of ΔH and ΔU for the reversible isothermal evaporation of 90.0 g of water at 100°C. Assume that water vapours behave as an ideal gas and heat of evaporation of water is 540 cal g−1. (R = 2 cal mol−1 K−1) (Roorkee 1998)

Solution. Water ⇌ Vapour. Moles before evaporation = 90/18 = 5.
Evaporation of 5 mol of water occurs reversibly and isothermally into vapour at constant pressure.
ΔH = heat of evaporation × amount evaporated = 540 × 90 = 48600 cal.
ΔH = ΔU + ΔnRT, so ΔU = 48600 − 5 × 1 × 2 × 373 = 48600 − 3730 = 44870 cal.

Teacher's Note: Reversible evaporation at constant pressure: heat equals ΔH. Δn counts only the vapour formed (5 mol).

Exam Note: State ΔH = qp; then subtract ΔnRT with T = 373 K.

Question 6. When 1 mole of ice melts at 0°C and at constant pressure of 1 atm, 1440 cal of heat are absorbed by the system. The molar volume of ice and water are 0.0196 and 0.0180 litre respectively. Calculate ΔH and ΔU.

Solution. Ice → Water; ΔH = 1440 cal/mol (heat at constant pressure is given).
ΔH = ΔU + PΔV, with PΔV = 76 × 13.6 × 981 × (18 − 19.6) erg (P in dyne cm−2, V in mL) = −1.62 × 106 erg = −1.62 × 106/(4.18 × 107) cal = −0.039 cal.
PΔV is negligible, so ΔH ≈ ΔU = 1440 cal/mol.

Teacher's Note: Solid to liquid volume change is tiny, so PΔV is negligible and ΔH ≈ ΔU.

Exam Note: Quote PΔV ≈ −0.039 cal and conclude ΔH ≈ ΔU.

Question 7. Standard heat of formation of HgO(s) at 298 K and at constant pressure is −90.8 kJ mol−1. If excess of HgO(s) absorbs 41.84 kJ of heat at constant volume, calculate the amount of Hg that can be obtained at constant volume and 298 K. (At. wt. of Hg = 200).

Solution. Given Hg(l) + (1/2)O2(g) → HgO(s); ΔH° = −90.8 kJ.
Therefore HgO(s) → Hg(l) + (1/2)O2(g); ΔH° = +90.8 kJ.
ΔH° = ΔU° + ΔnRT: 90.8 × 103 = ΔU° + (1/2) × 8.314 × 298, so ΔU° = 89.56 kJ mol−1 (Δn = +1/2).
ΔU° is heat of decomposition at constant volume. Moles of Hg formed = 41.84/89.56 = 0.4672.
wHg = 0.4672 × 200 = 93.44 g.

Teacher's Note: Convert ΔH of the reverse reaction to ΔU first, then scale by heat absorbed.

Exam Note: Check the sign of Δn for the decomposition direction.

Question 8. When 1 mole of ice at 0°C and 4.6 mm of Hg is converted to water vapours at a constant temperature and pressure. Find ΔH and ΔU, if the latent heat of fusion of ice is 80 cal/g and latent heat of vaporisation of liquid water at 0°C is 536 cal/g. The volume of ice in comparison to volume of vapours may be neglected.

Solution. Ice → Vapour; ΔH = ΔHf + ΔHv = 80 × 18 + 536 × 18 = 11088 cal/mol.
ΔH = ΔU + PΔV. ΔV = volume of vapours − volume of ice = volume of vapours at 4.6 mm and 0°C (Vice negligible).
PV = nRT for gas: PΔV = 1 × 8.314 × 273 N m = 8.314 × 273/4.18 cal = 543 cal.
ΔU = ΔH − PΔV = 11088 − 543 = 10545 cal.

Teacher's Note: Add fusion and vaporisation heats per mole; PΔV equals RT for one mole of vapour formed.

Exam Note: Sum both latent heats, then subtract RT in calories.

Question 9. Calculate the heat of transition for carbon from the following: CDiamond + O2 → CO2(g); ΔH = −94.3 kcal; CAmorphous + O2 → CO2(g); ΔH = −97.6 kcal. Also calculate the heat required to change 1 g of CDiamond to CAmorphous.

Solution. Subtracting Eq. (2) from Eq. (1): CD − CA → 0; ΔH = +3.3, i.e. CD → CA; ΔH = +3.3 kcal (heat of transition).
12 g CD changes to CA with heat change +3.3 kcal, so 1 g CD → CA with heat change = +3.3/12 = 0.275 kcal.

Teacher's Note: Hess's law: subtract the two combustion equations. Per-gram value divides by molar mass 12.

Exam Note: Subtract equations in correct order; sign is positive.

Question 10. Calculate the enthalpy of vaporisation for water from the following: H2(g) + (1/2)O2(g) → H2O(g); ΔH = −57.0 kcal; H2(g) + (1/2)O2(g) → H2O(l); ΔH = −68.3 kcal. Also calculate the heat required to change 1 g H2O(l) to H2O(g).

Solution. Subtracting Eq. (2) from Eq. (1): H2O(l) → H2O(g); ΔH = −57.0 + 68.3 = +11.3 kcal.
Enthalpy of vaporisation for H2O = +11.3 kcal.
18 g H2O requires 11.3 kcal, so 1 g H2O requires 11.3/18 = 0.628 kcal.

Teacher's Note: Vaporisation is the difference of the two formation enthalpies. Divide by 18 for per gram.

Exam Note: Give both per-mole and per-gram values with units.

Question 11. The specific heats of iodine vapour and solid are 0.031 and 0.055 cal/g respectively. If heats of sublimation of iodine is 24 cal/g at 200°C, what is its value at 250°C?

Solution. I2(s) → I2(v); ΔH = 24 cal/g at 200°C.
ΔCp = Cp of product − Cp of reactant = 0.031 − 0.055 = −0.024 cal/g.
Kirchhoff: ΔH2 − ΔH1 = ΔCp(T2 − T1)
ΔH2 − 24 = −0.024 × (523 − 473)
ΔH2 = 24 − 1.2 = 22.8 cal/g.

Teacher's Note: Kirchhoff's equation: ΔCp is products minus reactants, here vapour minus solid.

Exam Note: Only the temperature difference matters, not Kelvin conversion.

Question 12. The heat of reaction for N2 + 3H2 → 2NH3 at 27°C is −91.94 kJ. What will be its value at 50°C? The molar heat capacities at constant P and 27°C for N2, H2 and NH3 are 28.45, 28.32 and 37.07 joule respectively.

Solution. N2 + 3H2 → 2NH3; ΔH = −91.94 kJ at 300 K.
ΔCp (J/mol) = 2 × 37.07 − 28.45 − 3 × 28.32 = −39.27 J.
ΔH2 − ΔH1 = ΔCp(T2 − T1)
ΔH2 + 91940 = −39.27 × (323 − 300) = −903.2 J, so ΔH2 = −92843 J = −92.843 kJ.
Corrected: the book prints the intermediate value as −928432 J; the correct value is −92843.2 J = −92.843 kJ (the final answer in kJ is as printed).

Teacher's Note: Use stoichiometric coefficients when computing ΔCp; units are J, convert to kJ at the end.

Exam Note: Multiply ΔCp by ΔT = 23 K; watch J versus kJ.

Question 13. Calculate the standard internal energy change for the reaction OF2(g) + H2O(g) → O2(g) + 2HF(g) at 298 K. Given standard enthalpies of formation in kJ mol−1 are OF2(g) = +20; H2O(g) = −250 and HF(g) = −270.

Solution. Given: (1/2)O2 + F2 → OF2; ΔH° = +20 kJ ...(1); H2 + (1/2)O2 → H2O(g); ΔH° = −250 kJ ...(2); (1/2)H2 + (1/2)F2 → HF(g); ΔH° = −270 kJ ...(3).
Adding (1) and (2): H2 + F2 + O2 → OF2 + H2O(g); ΔH° = −230 kJ ...(4).
Multiply (3) by 2 and subtract (4): O2 + 2HF → OF2 + H2O(g); ΔH° = +310 kJ, or OF2(g) + H2O(g) → O2(g) + 2HF(g); ΔH° = −310 kJ.
Δn = 3 − 2 = 1, R = 8.314 J, T = 298 K. ΔH° = ΔU° + ΔnRT: −310000 = ΔU° + 1 × 8.314 × 298, so ΔU° = −312477.5 J = −312.48 kJ.

Teacher's Note: Products minus reactants for ΔH, then convert to ΔU using Δn = 1 gaseous mole.

Exam Note: Remember elements in standard state have ΔHf = 0.

Question 14. The molar heats of combustion of C2H2(g), C(graphite) and H2(g) are 310.62, 94.05 and 68.32 kcal respectively. Calculate heat of formation of C2H2.

Solution. To find 2C(graphite) + H2(g) → C2H2(g); ΔH = ?
Given: C2H2 + (5/2)O2 → 2CO2 + H2O(l); ΔH = −310.62 kcal ...(1); C + O2 → CO2; ΔH = −94.05 kcal ...(2); H2 + (1/2)O2 → H2O; ΔH = −68.32 kcal ...(3).
Multiply (2) by 2 and add (3): 2C + (5/2)O2 + H2 → 2CO2 + H2O; ΔH = −256.42 kcal ...(4).
Subtract (1) from (4): 2C(graphite) + H2(g) → C2H2(g); ΔH = +54.2 kcal.

Teacher's Note: Formation enthalpy = sum of reactant combustion heats minus product combustion heat.

Exam Note: Double the carbon equation; positive ΔHf means endothermic.

Question 15. From the standard enthalpies of combustion given below in kJ mol−1 and standard enthalpy of acetylene, find the standard enthalpy change when acetylene is hydrogenated to ethane. (C = −394, H2 = −286, C2H6 = −1560, C2H2 = +227)

Solution. To find C2H2 + 2H2 → C2H6; ΔH = ?
Given: C + O2 → CO2; ΔH = −394 ...(1); H2 + (1/2)O2 → H2O; ΔH = −286 ...(2); C2H6 + (7/2)O2 → 2CO2 + 3H2O; ΔH = −1560 ...(3); 2C + H2 → C2H2; ΔH = +227 ...(4).
Multiply (1) by 2 and (2) by 3 and add: 2C + (7/2)O2 + 3H2 → 2CO2 + 3H2O; ΔH = −1646 kJ ...(5).
Subtract (3) from (5): 2C + 3H2 → C2H6; ΔH = −86 kJ ...(6).
Subtract (4) from (6): C2H2 + 2H2 → C2H6; ΔH = −313 kJ, i.e. heat of hydrogenation of C2H2 = −313 kJ.

Teacher's Note: The +227 value is the formation enthalpy of acetylene, as the solution uses it. Build ΔHf of ethane first.

Exam Note: Build target equation step by step; acetylene's +227 is formation value.

Question 16. The molar heat of formation of NH4NO3(s) is −367.54 kJ and those of N2O(g), H2O(l) are 81.46 and −285.8 kJ respectively at 25°C and 1 atmosphere pressure. Calculate ΔH and ΔU of the reaction NH4NO3(s) → N2O(g) + 2H2O(l).

Solution. ΔHreaction = ΔHproducts − ΔHreactants = ΔHN2O + 2ΔHH2O − ΔHNH4NO3 = 81.46 + 2(−285.8) − (−367.54) = −122.6 kJ.
ΔH = ΔU + ΔnRT (Δn = 1 − 0 = 1, R = 8.314 J, T = 298 K): −122.6 × 103 = ΔU + 1 × 8.314 × 298, so ΔU = −125077 J = −125.077 kJ.

Teacher's Note: Liquid water does not count in Δn; only the one mole of N2O gas does.

Exam Note: Products minus reactants; then ΔU = ΔH − ΔnRT.

Question 17. At 300 K, the standard enthalpies of formation of C6H5COOH(s), CO2(g) and H2O(l) are −408, −393 and −286 kJ mol−1 respectively. Calculate the heat of combustion of benzoic acid at (i) constant pressure and (ii) constant volume. (R = 8.31 J mol−1 K−1) (Roorkee 1995)

Solution. Given: 7C + 3H2 + O2 → C6H5COOH; ΔH° = −408 ...(1); C + O2 → CO2; −393 ...(2); H2 + (1/2)O2 → H2O(l); −286 ...(3).
Required: C6H5COOH(s) + (15/2)O2 → 7CO2 + 3H2O(l).
By (2) × 7 + (3) × 3 − (1): ΔH° = [−393 × 7 − 286 × 3 + 408] = −3201 kJ (i) at constant pressure.
ΔH° = ΔU° + ΔnRT; Δn = 7 − 15/2 = −0.5: −3201 = ΔU° + (−0.5) × 8.314 × 10−3 × 300, so ΔU° = −3201 + 1.2471 = −3199.7529 kJ (ii) at constant volume.

Teacher's Note: Combustion enthalpy from formation data: products minus reactant. Δn is for gases only, here −1/2.

Exam Note: Quote both ΔH and ΔU; Δn = −1/2.

Question 18. Given below are some standard heats of reaction: (a) Heat of formation of water = −68.3 kcal (b) Heat of combustion of acetylene = −310.6 kcal (c) Heat of combustion of ethylene = −337.2 kcal. Calculate the heat of reaction for the hydrogenation of acetylene at constant volume at 25°C.

Solution. Standard heats of reaction mean ΔH at 1 atm and 25°C.
H2 + (1/2)O2 → H2O; ΔH = −68.3 kcal ...(1)
C2H2 + (5/2)O2 → 2CO2 + H2O; ΔH = −310.6 kcal ...(2)
C2H4 + 3O2 → 2CO2 + 2H2O; ΔH = −337.2 kcal ...(3)
Add (1) and (2) and subtract (3): C2H2 + H2 → C2H4; ΔH = −41.7 kcal.
Δn = 1 − 2 = −1, R = 2 cal, T = 298 K: −41.7 × 103 = ΔU + (−1) × 2 × 298, so ΔU = −41104 cal = −41.104 kcal.

Teacher's Note: Combine combustion equations by Hess's law, then convert ΔH to ΔU using Δn = −1.

Exam Note: Finish with ΔU, not ΔH; question asks constant volume.

Question 19. When 2 mole of C2H6(g) are completely burnt, 3129 kJ of heat is liberated. Calculate the heat of formation of C2H6(g). ΔHf for CO2(g) and H2O(l) are −395 and −286 kJ mol−1 respectively.

Solution. Required: 2C(s) + 3H2(g) → C2H6(g); ΔH = ? ...(1)
C + O2 → CO2; −395 ...(2); H2 + (1/2)O2 → H2O(l); −286 ...(3); C2H6 + (7/2)O2 → 2CO2 + 3H2O; ΔH = −3129/2 = −1564.5 kJ ...(4).
Multiplying (2) by 2 and (3) by 3 and adding: 2C + 3H2 + (7/2)O2 → 2CO2 + 3H2O; ΔH = −1648 kJ ...(5).
Subtracting (4) from (5): 2C + 3H2 → C2H6; ΔHf of C2H6 = −83.5 kJ.

Teacher's Note: Halve 3129 kJ to get per-mole combustion heat before applying Hess's law.

Exam Note: Per-mole conversion is the usual trap; show it.

Question 20. The standard heats of formation for CCl4(g), H2O(g), CO2(g) and HCl(g) are −25.5, −57.8, −94.1 and −22.1 kcal respectively. Calculate ΔH(298) for the reaction CCl4(g) + 2H2O(g) → CO2(g) + 4HCl(g)

Solution. At 298 K, ΔH values are ΔH°, i.e. standard heats of formation.
ΔH°reaction = ΔH°products − ΔH°reactants = ΔH°CO2 + 4ΔH°HCl − ΔH°CCl4 − 2ΔH°H2O = −94.1 + 4(−22.1) − (−25.5) − 2(−57.8) = −41.4 kcal.

Teacher's Note: Multiply each formation enthalpy by its stoichiometric coefficient before summing.

Exam Note: Products minus reactants with coefficients; units kcal.

Question 21. The standard enthalpy of combustion at 25°C of H2, C6H10 and cyclohexane (C6H12) are −241, −3800 and −3920 kJ mol−1 respectively. Calculate heat of hydrogenation of cyclohexene (C6H10).

Solution. To find C6H10 + H2 → C6H12; ΔH = ?
H2 + (1/2)O2 → H2O; −241 ...(1); C6H10 + (17/2)O2 → 6CO2 + 5H2O; −3800 ...(2); C6H12 + 9O2 → 6CO2 + 6H2O; −3920 ...(3).
Adding (1) and (2) and then subtracting (3): C6H10 + H2 → C6H12; heat of hydrogenation of C6H10 = −121 kJ.

Teacher's Note: Hydrogenation heat = combustion(alkene) + combustion(H2) − combustion(alkane).

Exam Note: Reactants' combustion minus product's combustion gives ΔH.

Question 22. Calculate standard heat of formation of CS2. Given that standard heat of combustion of C, S and CS2 are −393.3, −293.72 and −1108.76 kJ mol−1.

Solution. To find C + 2S → CS2; ΔH = ?
C + O2 → CO2; −393.3 kJ ...(1); S + O2 → SO2; −293.72 kJ ...(2); CS2 + 3O2 → CO2 + 2SO2; −1108.76 kJ ...(3).
Multiply (2) by 2 and add (1): C + 2S + 3O2 → CO2 + 2SO2; ΔH = −980.74 kJ ...(4).
Subtract (3) from (4): C + 2S → CS2; ΔH = +128.02 kJ. ΔHf of CS2 = +128.02 kJ.

Teacher's Note: Two sulphur atoms needed, so double the S combustion equation.

Exam Note: Positive ΔHf for CS2: it is endothermic.

Question 23. From the following data, calculate the enthalpy change for the combustion of cyclopropane at 298 K. The enthalpy of formation of CO2(g), H2O(l) and propene(g) are −393.5, −285.8 and 20.42 kJ mol−1 respectively. The enthalpy of isomerisation of cyclopropane to propene is −33.0 kJ mol−1. (IIT 1998)

Solution. Given: cyclopropane → CH3CH=CH2; ΔH = −33.0 kJ ...(1); C + O2 → CO2; −393.5 kJ ...(2); H2 + (1/2)O2 → H2O(l); −285.8 kJ ...(3); 3C + 3H2 → CH3CH=CH2(g); ΔH = 20.42 kJ ...(4).
(4) − (1) gives 3C + 3H2 → cyclopropane; ΔH = 53.42 kJ ...(5).
[3 × (2) + 3 × (3)] − (5) gives cyclopropane + (9/2)O2 → 3CO2 + 3H2O; ΔH = −2091.32 kJ.

Teacher's Note: First get ΔHf of cyclopropane (53.42 kJ) via the isomerisation, then use products minus reactants.

Exam Note: Derive ΔHf(cyclopropane) first; then combustion.

Question 24. Determine enthalpy change for C3H8(g) + H2(g) → C2H6(g) + CH4(g) at 25°C using heat of combustion values under standard conditions. Compounds H2(g), CH4(g), C2H6(g), C(graphite): ΔH° in kJ/mol = −285.8, −890.0, −1560.0, −393.5. The standard heat of formation of C3H8(g) is −103.8 kJ mol−1. (IIT 1992)

Solution. Given: H2 + (1/2)O2 → H2O(g); −285.8 ...(1); CH4 + 2O2 → CO2 + 2H2O(g); −890 ...(2); C2H6 + (7/2)O2 → 2CO2 + 3H2O(g); −1560.0 ...(3); 3C + 4H2 → C3H8; −103.8 ...(4); C + O2 → CO2; −393.5 ...(5).
Add (2) and (3): CH4 + C2H6 + (11/2)O2 → 3CO2 + 5H2O; ΔH = −2450 ...(6).
Add (4) and (6): CH4 + C2H6 + 3C + 4H2 + (11/2)O2 → 3CO2 + 5H2O + C3H8; ΔH = −2553.8 ...(7).
Multiply (1) by 5 and (5) by 3 and add: 5H2 + 3C + (11/2)O2 → 5H2O + 3CO2; ΔH = −2609.5 ...(8).
Subtract (8) from (7) and rearrange: H2(g) + C3H8(g) → CH4(g) + C2H6(g); ΔH = −55.7 kJ.

Teacher's Note: Convert combustion data into formation enthalpies of CH4 and C2H6, then products minus reactants.

Exam Note: Check: ΔHf(CH4) = −75.1, (C2H6) = −84.4 kJ.

Question 25. Standard heat of formation of CH4, CO2 and H2O(g) are −76.2, −394.8 and −241.6 kJ mol−1 respectively. Calculate the amount of heat evolved by burning 1 m3 of CH4 measured under normal conditions. (Roorkee 1990)

Solution. C + 2H2 → CH4; −76.2 kJ ...(1); C + O2 → CO2; −394.8 kJ ...(2); H2 + (1/2)O2 → H2O(g); −241.6 kJ ...(3).
Multiply (3) by 2 and add (2): C + 2H2 + 2O2 → CO2 + 2H2O(g); ΔH = −878 kJ ...(4).
Subtract (1) from (4): CH4 + 2O2 → CO2 + 2H2O(g); ΔH = −801.8 kJ.
22.4 litre CH4 on burning gives energy = 801.8 kJ, i.e. 22.4 × 10−3 m3 gives 801.8 kJ.
1 m3 CH4 on burning gives energy = 801.8/(22.4 × 10−3) = 35.795 × 103 kJ.
Heat evolved by burning 1 m3 CH4 = 35.795 × 103 kJ.

Teacher's Note: Normal conditions: one mole occupies 22.4 L. Scale 1000 L to moles after getting per-mole heat.

Exam Note: Convert m³ to litres (1000 L) before dividing by 22.4.

Question 26. Diborane is a potential rocket fuel which undergoes combustion according to the reaction B2H6(g) + 3O2(g) → B2O3(s) + 3H2O(g). From the following data, calculate the enthalpy change for the combustion of diborane: (1) 2B(s) + (3/2)O2(g) → B2O3(s); ΔH = −1273 kJ; (2) H2(g) + (1/2)O2(g) → H2O(l); ΔH = −286 kJ; (3) H2O(l) → H2O(g); ΔH = 44 kJ; (4) 2B(s) + 3H2(g) → B2H6(g); ΔH = 36 kJ. (IIT 2000)

Solution. To get B2H6 + 3O2 → B2O3(s) + 3H2O(g): by Eq. (1) + 3 × (2) + 3 × (3):
2B(s) + 3H2(g) + 3O2(g) → B2O3(s) + 3H2O(g); ΔH = −1273 − 858 + 132 = −1999 kJ ...(A).
By Eq. (A) − (4): B2H6(g) + 3O2(g) → B2O3(s) + 3H2O(g); ΔH = −2035 kJ.

Teacher's Note: Convert liquid water to vapour using equation (3); product here is H2O(g).

Exam Note: Use equation (3) three times; subtract diborane formation.

Question 27. Calculate heat of formation of KOH(s) using the following equations. K(s) + H2O(l) + aq. → KOH(aq) + (1/2)H2(g); ΔH = −48.0 kcal ...(1); H2(g) + (1/2)O2(g) → H2O(l); ΔH = −68.4 kcal ...(2); KOH(s) + aq. → KOH(aq); ΔH = −14.0 kcal ...(3)

Solution. To evaluate ΔH for K(s) + (1/2)O2(g) + (1/2)H2(g) → KOH(s).
Adding Eqs. (1) and (2): K(s) + (1/2)H2(g) + (1/2)O2(g) + aq. → KOH(aq); ΔH = −116.4 kcal ...(4).
Subtracting Eq. (3) from Eq. (4): K(s) + (1/2)H2(g) + (1/2)O2(g) → KOH(s); ΔH = −102.4 kcal.

Teacher's Note: Subtracting the heat of solution of KOH(s) removes the aqueous state and leaves the solid.

Exam Note: Subtract the solution step; ΔHf = −102.4 kcal.

Question 28. Calculate ΔHf° for chloride ion from the following data: (1/2)H2(g) + (1/2)Cl2(g) → HCl(g); ΔHf° = −92.4 kJ; HCl(g) + nH2O → H+(aq.) + Cl−(aq.); ΔH° = −74.8 kJ; ΔHf° H+(aq.) = 0.0 kJ (Roorkee 1992)

Solution. (1/2)H2(g) + aq. → H+(aq.) + e; ΔH° = 0 ...(1)
(1/2)H2(g) + (1/2)Cl2(g) → HCl(g); ΔH° = −92.4 kJ ...(2)
HCl(g) + nH2O(l) → H+(aq.) + Cl−(aq.); ΔH° = −74.8 kJ ...(3)
Add (2) and (3): (1/2)H2(g) + (1/2)Cl2(g) + nH2O → H+(aq.) + Cl−(aq.); ΔH° = −167.2 kJ ...(4)
Subtract Eq. (1) from (4): e + (1/2)Cl2(g) + aq. → Cl−(aq.); ΔH° = −167.2 kJ.
Heat of formation of Cl−(aq.) = −167.2 kJ.

Teacher's Note: The hydrogen ion convention ΔHf°(H+, aq) = 0 makes the chloride value equal to the total.

Exam Note: State the H+ = 0 convention to earn the final mark.

Question 29. Benzene burns in O2 according to the equation C6H6(l) + (15/2)O2(g) → 3H2O(g) + 6CO2(g). If standard heat enthalpy of C6H6(l), H2O(g) and CO2(g) are 11.7, −68.3 and −94.0 kcal respectively, calculate the amount of heat liberated by burning 1 kg of benzene.

Solution. Standard heat enthalpy of a compound (ΔH°) = standard heat of formation of that compound.
6C + 3H2 → C6H6(l); ΔH° = 11.7 kcal ...(1); H2 + (1/2)O2 → H2O; ΔH° = −68.3 kcal ...(2); C + O2 → CO2; ΔH° = −94.0 kcal ...(3).
Multiply (2) by 3 and (3) by 6 and add: 6C + 3H2 + (15/2)O2 → 6CO2 + 3H2O; ΔH° = −768.9 kcal ...(4).
Subtract (1) from (4): C6H6 + (15/2)O2 → 6CO2 + 3H2O; ΔH° = −780.6 kcal.
78 g C6H6 gives heat = 780.6 kcal, so 1000 g gives 780.6 × 1000/78 = 10007.7 kcal.
Heat produced by burning 1 kg C6H6 = 10007.7 kcal.

Teacher's Note: The printed value −68.3 is used for water throughout; per-mole result scales by 1000/78.

Exam Note: Scale per mole to 1 kg with molar mass 78.

Question 30. The heat evolved on combustion of 1 g starch (C6H10O5)n into CO2 and H2O(l) is 17.49 kJ g−1. Compute the enthalpy of formation of 1 g starch. Given ΔHf of H2O(l) = −285.85 kJ mol−1, ΔHf of CO2 = −293.7 kJ mol−1.

Solution. H2 + (1/2)O2 → H2O(l); ΔH = −285.85 kJ ...(1); C + O2 → CO2; ΔH = −293.7 kJ ...(2).
1 g starch on combustion gives 17.49 kJ energy, so 162n g starch gives 17.49 × 162n = 2833.38n kJ. Molar mass of starch (C6H10O5)n = 162n.
(C6H10O5)n + 6nO2 → 6nCO2 + 5nH2O; ΔH = −2833.38n kJ ...(3)
Multiply (2) by 6n and (1) by 5n, then add: 5nH2 + (5n/2)O2 + 6nC + 6nO2 → 5nH2O + 6nCO2; ΔH = −3191.45n kJ ...(4)
Subtract (3) from (4): 6nC + 5nH2 + (5n/2)O2 → (C6H10O5)n; ΔH = −358.07n kJ.
Heat of formation for 162n g = −358.07n kJ, so for 1 g = −358.07/162 = −2.21 kJ.

Teacher's Note: The n cancels: use the repeat-unit molar mass 162 g. Formation = sum of products' formation minus combustion heat.

Exam Note: Per-gram answer: divide the per-mole value by 162.

Question 31. The heat of combustion of ethane gas is 368 kcal/mole. Assuming that 60% of heat is useful, how many m3 of ethane measured at STP must be burnt to supply enough heat to convert 50 kg of water at 10°C to steam at 100°C. Specific heat of water is 1 cal/g. Heat of vaporisation of H2O is 540 cal/g.

Solution. ΔH needed for change = ΔHheating + ΔHvaporisation = 50 × 103 × 1 × 90 + 540 × 50 × 103 = 31500 × 103 cal.
Since only 60% of heat is used, ΔH actually needed = 31500 × 103 × 100/60 cal.
368 × 103 cal is given on combustion by 22.4 litre C2H6, so 31500 × 103 × 100/60 cal is given by 22.4 × 31500 × 103 × 100/(60 × 368 × 103) = 3.196 × 103 litre = 3.196 m3.

Teacher's Note: Add sensible heat (10°C to 100°C) and latent heat; then divide by the 60% efficiency.

Exam Note: Do not forget the 60% efficiency; 1 m³ = 1000 L.

Question 32. ΔH for combustion of ethane and ethyne are −341.1 and −310.0 kcal respectively. Which is better gas welder and why?

Solution. A better gas welder is one which possesses high calorific value, i.e. heat produced by 1 g of fuel.
ΔHcombustion for C2H6 = −341.1 kcal; calorific value = −341.1/30 kcal/g = −11.37 kcal/g.
ΔHcombustion for C2H2 = −310.0 kcal; calorific value = −310.0/26 kcal/g = −11.92 kcal/g.
C2H2 is the better gas welder.

Teacher's Note: Compare heat per gram, not per mole; ethyne's smaller molar mass gives higher calorific value.

Exam Note: Divide by molar mass (30 and 26) before comparing.

Question 33. The combustion of 5.0 g of coke raised the temperature of 1.0 kg of water from 10 to 47°C. Calculate the fuel value of coke. Specific heat of H2O is 1 cal/g.

Solution. ΔH supplied = 103 × 1 × 37 = 37 × 103 cal.
Thus fuel value = 37 × 103/5 = 7400 cal/g.

Teacher's Note: Fuel value is heat per gram: m·s·ΔT of water divided by mass of fuel burnt.

Exam Note: Use ΔT = 37°C and divide by 5 g.

Question 34. A cooking gas cylinder is assumed to contain 11.2 kg isobutane having heat of combustion −2658 kJ mol−1. If a family needs 15 × 103 kJ energy per day for cooking, how long a cylinder can last. Also if 30% heat is lost due to incomplete combustion, then how long would it take to last.

Solution. C4H10(g) + (13/2)O2(g) → 4CO2(g) + 5H2O(l); ΔH = −2658 kJ.
I. Heat obtained by burning 11.2 kg isobutane = (11.2 × 103/58) × 2658 = 5.13 × 105 kJ. Days for which cylinder can serve = 5.13 × 105/(15 × 103) = 34 days.
II. If 30% heat is lost: heat obtained = 5.13 × 105 × 70/100 = 3.59 × 105 kJ. Days = 3.59 × 105/(15 × 103) = 24 days.

Teacher's Note: Moles = mass/58; usable heat after 30% loss is 70% of total.

Exam Note: Show moles, total heat, then divide by daily need.

Question 35. An athlete is given 100 g glucose of energy equivalent to 1560 kJ. He utilize 50% of this gained energy in an event. In order to avoid storage of energy in body, calculate the mass of water he would need to perspire. Enthalpy of H2O for evaporation is 44 kJ mol−1.

Solution. Energy supplied to athlete by consuming 100 g glucose = 1560 kJ.
Energy utilized in event = (50/100) × 1560 = 780 kJ. Energy left in body as excess = 1560 − 780 = 780 kJ.
44 kJ energy is used to evaporate 18 g H2O, so 780 kJ energy is used to evaporate 18 × 780/44 g H2O = 319.09 g.
Thus athlete should perspire 319.09 g of H2O in order to avoid any storage of energy in body.

Teacher's Note: Only the unused half of the energy (780 kJ) must be removed by evaporation of sweat.

Exam Note: Use 44 kJ per 18 g, applied to 780 kJ.

Question 36. The enthalpy change involved in the oxidation of glucose is −2880 kJ mol−1. Twenty five percent of this energy is available for muscular work. If 100 kJ of muscular work is needed to walk one kilometer, what is the maximum distance that a person will be able to walk after eating 120 g of glucose? (IIT May 1997)

Solution. Energy available for muscular work = 2880 × 25/100 = 720 kJ/mol.
Energy available for muscular work for 120 g glucose = 720 × 120/180 = 480 kJ.
100 kJ is used in 1 km distance, so 480 kJ is used in 4.8 km distance.

Teacher's Note: Take 25% of the molar enthalpy, then scale 120 g to 120/180 mole.

Exam Note: Molar mass of glucose is 180; state 4.8 km.

Question 37. An athlete takes 20 breaths per minute at room temperature. The air inhaled in each breath is 200 mL which contains 20% oxygen by volume, while exhaled air contains 10% oxygen by volume. Assuming that all the oxygen consumed if used for converting glucose into CO2 and H2O(l), how much glucose will be burnt in the body in one hour and what is the heat produced? (Room temperature = 27°C and enthalpy of combustion of glucose is −2822.5 kJ mol−1 at 0°C) (IIT 1997)

Solution. Inhaled O2 in one breath = 200 × 20/100 mL; exhaled O2 in one breath = 200 × 10/100 mL.
Used O2 in one breath = 200 × 20/100 − 200 × 10/100 = 20 mL.
Breaths in 1 hour = 20 × 60 = 1200. Volume of O2 used in 1 hour = 20 × 1200 = 24000 mL at 27°C = (24000/300) × 273 mL at 0°C = 21840 mL = 21.84 litre.
C6H12O6 + 6O2 → 6CO2 + 6H2O; ΔH = −2822.5 kJ.
6 × 22.4 litre O2 is used for 180 g glucose, so 21.84 litre O2 is used for 180 × 21.84/(6 × 22.4) = 29.25 g.
6 × 22.4 litre O2 with glucose gives 2822.5 kJ, so 21.84 litre O2 gives 2822.5 × 21.84/(6 × 22.4) = 458.66 kJ.

Teacher's Note: Reduce O2 volume to 0°C before using 22.4 L/mol. Net O2 used is inhaled minus exhaled.

Exam Note: Convert 27°C volume to STP; then use 6 mol O2 per glucose.

Question 38. Calculate the ΔH for NO2(g) → NO(g) + O(g) if heat of formation of O-atoms is 249 kJ/mol. NO(g) + O3(g) → NO2(g) + O2(g); ΔH = −200 kJ; 3O2(g) → 2O3(g); ΔH = 285.4 kJ.

Solution. (1/2)O2 → O; ΔH = 249 kJ ...(1)
NO2 + O2 → NO + O3; ΔH = +200 kJ ...(2) (reverse of the given equation)
O3 → (3/2)O2; ΔH = −285.4/2 kJ ...(3)
Adding Eqs. (1), (2) and (3): NO2 → NO + O; ΔH = 249 + 200 − 142.7 = 306.3 kJ.

Teacher's Note: Reverse the NO oxidation step and halve the ozone formation equation so intermediates cancel.

Exam Note: Flip signs when reversing; halve 285.4 for one O3.

Question 39. Calculate the heat of dissociation of N2O4 into NO2 from the data: N2 + O2 → 2NO; ΔH = +43.10 kcal ...(1); N2 + 2O2 → N2O4; ΔH = −1.870 kcal ...(2); 2NO2 → 2NO + O2; ΔH = +26.10 kcal ...(3)

Solution. We have to find ΔH for N2O4 → 2NO2.
Add Eqs. (2) and (3): N2 + 2O2 + 2NO2 → N2O4 + 2NO + O2; ΔH = +24.23 kcal, or N2 + O2 + 2NO2 → N2O4 + 2NO; ΔH = 24.23 kcal ...(4).
Subtract Eq. (1) from Eq. (4): 2NO2 → N2O4; ΔH = −18.87 kcal, or N2O4 → 2NO2; ΔH = +18.87 kcal.
Heat of dissociation of N2O4 = +18.87 kcal.

Teacher's Note: Combine equations so only N2O4 and NO2 remain; reversing flips the sign.

Exam Note: Final sign positive: dissociation is endothermic.

Question 40. 3.67 litre of ethylene and methane gaseous mixture on complete combustion at 25°C produces 6.11 litre of CO2. Find out the amount of heat evolved on burning one litre of gaseous mixture. The heats of combustion of C2H4 and CH4 are −1423 and −891 kJ mol−1 at 25°C. (IIT 1991)

Solution. Let volumes of C2H4 and CH4 be a and b litre respectively at 25°C: a + b = 3.67 litre ...(1).
C2H4 + 3O2 → 2CO2 + 2H2O; CH4 + 2O2 → CO2 + 2H2O. Volume of CO2 from a litre C2H4 = 2a and from b litre CH4 = b, so 2a + b = 6.11 litre ...(2).
By Eqs. (1) and (2): a = 2.44 litre, b = 1.23 litre.
Volume of C2H4 in 1 litre mixture = (2.44/3.67) × 1 = 0.6648 litre; volume of CH4 in 1 litre mixture = (1.23/3.67) × 1 = 0.3352 litre.
Volume of 1 mole of gas at 25°C = 22.4 × 298/273 = 24.45 litre.
24.45 litre C2H4 produces 1423 kJ, so 0.6648 litre produces 1423 × 0.6648/24.45 = 38.69 kJ.
24.45 litre CH4 produces 891 kJ, so 0.3352 litre produces 891 × 0.3352/24.45 = 12.22 kJ.
Total heat produced = 38.69 + 12.22 = 50.91 kJ.

Teacher's Note: Two simultaneous equations on volumes; molar volume at 25°C is 24.45 L, not 22.4 L.

Exam Note: Use 24.45 L/mol at 25°C; report heat for 1 L.

Question 41. An intimate mixture of Fe2O3 and Al is used in solid fuel rocket. Calculate the fuel value per g and per mL of mixture. ΔHAl2O3 = 399.0 kcal, ΔHFe2O3 = 199.0 kcal; density of Fe2O3 and Al are 5.2 g/mL and 2.7 g/mL respectively.

Solution. 2Al + Fe2O3 → Al2O3 + 2Fe; ΔH = ?
2Al + (3/2)O2 → Al2O3; ΔH = −399.0 kcal ...(1); 2Fe + (3/2)O2 → Fe2O3; ΔH = −199.0 kcal ...(2). Subtracting (2) from (1): 2Al + Fe2O3 → 2Fe + Al2O3; ΔH = −200 kcal.
Molar mass of fuel mixture = 2 × 27 + 160 = 214 g (2 × 27 + 2 × 56 + 48 = 214 g). 214 g mixture produces 200 kcal, so 1 g mixture produces 200/214 = 0.9346 kcal/g.
Volume of mixture = vol. of Al + vol. of Fe2O3 = 54/2.7 + 160/5.2 = 20 + 30.76 = 50.76 mL. 50.76 mL mixture produces 200 kcal, so 1 mL produces 200/50.76 = 3.94 kcal/mL.

Teacher's Note: The fuel mixture is 2 mol Al plus 1 mol Fe2O3; volumes add from densities.

Exam Note: Mass 214 g and volume 50.76 mL of the stoichiometric mixture.

Question 42. The heat of solution of anhydrous CuSO4 is −15.9 kcal and that of CuSO4·5H2O is 2.8 kcal. Calculate the heat of hydration of CuSO4.

Solution. CuSO4 + aq. → CuSO4(aq.); ΔH = −15.9 kcal ...(1)
CuSO4·5H2O + aq. → CuSO4(aq.); ΔH = +2.8 kcal ...(2)
Subtracting Eq. (2) from Eq. (1): CuSO4 + 5H2O → CuSO4·5H2O; ΔH = −15.9 − 2.8 = −18.7 kcal.
Heat of hydration of CuSO4 = −18.7 kcal.

Teacher's Note: Hydration heat = heat of solution of anhydrous salt minus that of the hydrate.

Exam Note: Order of subtraction decides the sign; hydration is exothermic.

Question 43. Calculate the integral heat of solution for H2SO4 + 3H2O → H2SO4·3H2O and H2SO4·3H2O + 5H2O → H2SO4·8H2O. Given that integral heat of solution for H2SO4 is given by 75.6 × n/(n + 1.8) kJ where n is number of water molecules associated with H2SO4.

Solution. H2SO4 + 3H2O → H2SO4·3H2O: ΔH1 = 75.6 × 3/(3 + 1.8) = 47.25 kJ.
H2SO4 + 8H2O → H2SO4·8H2O: ΔH2 = 75.6 × 8/(8 + 1.8) = 61.71 kJ.
H2SO4·3H2O + 5H2O → H2SO4·8H2O: ΔH3 = ΔH2 − ΔH1 = 61.71 − 47.25 = 14.46 kJ.
Corrected: the book prints ΔH2 = 61.72 and ΔH3 = 14.47 kJ; exact arithmetic gives 61.71 and 14.46 kJ (rounding only).

Teacher's Note: Second step is the difference of integral heats at n = 8 and n = 3.

Exam Note: Integral heats subtract: ΔH₃ = ΔH₂ − ΔH₁.

Question 44. The dissolution of 1 mole of NaOH(s) in 100 mole of H2O(l) give rise to evolution of heat as −42.34 kJ. However if 1 mole of NaOH(s) is dissolved in 1000 mole of H2O(l) the heat given out is 42.76 kJ. What would be enthalpy change when 900 mole of H2O(l) are added to a solution containing 1 mole of NaOH(s) in 100 mole of H2O(l)?

Solution. ΔH1 for 1 mole NaOH in 100 mole H2O(l) = −42.34 kJ. ΔH2 for 1 mole NaOH in 1000 mole H2O(l) = −42.76 kJ.
Thus, if 900 mole of H2O are added to a solution containing 1 mole NaOH in 100 mole H2O(l), then ΔH = ΔH2 − ΔH1 = −42.76 + 42.34 = −0.42 kJ.

Teacher's Note: Dilution heat is the difference between the two integral heats of solution.

Exam Note: Subtract the smaller dilution from the larger; sign negative.

Question 45. Calculate heat of dissociation for acetic acid from the following data: CH3COOH + NaOH → CH3COONa + H2O; ΔH = −13.2 kcal; H+ + OH− → H2O; ΔH = −13.7 kcal. Also, calculate heat of dissociation for NH4OH if, HCl + NH4OH → NH4Cl + H2O; ΔH = −12.27 kcal

Solution. For acetic acid: CH3COOH + NaOH → CH3COONa + H2O; ΔH = −13.2 kcal ...(1), or CH3COOH + Na+ + OH− → CH3COO− + Na+ + H2O.
NaOH and CH3COONa are strong electrolytes, completely ionised; CH3COOH is weak: CH3COOH → CH3COO− + H+; ΔH = q ...(2).
Adding (1) and (2) gives H+ + OH− → H2O; ΔH = −13.2 − q. Given ΔH = −13.7: −13.7 = −13.2 − q, so q = 0.5 kcal = heat of dissociation of acetic acid.
For NH4OH: NH4OH + HCl → NH4Cl + H2O; ΔH = −12.27 kcal. HCl and NH4Cl are strong electrolytes, so NH4OH + H+ + Cl− → NH4+ + Cl− + H2O; ΔH = −12.27 kcal ...(3). Dissociation: NH4OH → NH4+ + OH−; ΔH = q ...(4).
By (3) and (4): H+ + OH− → H2O; ΔH = −12.27 − q = −13.7, so q = 1.43 kcal = heat of dissociation of NH4OH.

Teacher's Note: Weak acid or base neutralisation heat is less than 13.7 kcal because dissociation absorbs the shortfall.

Exam Note: Shortfall from −13.7 kcal equals the heat of dissociation.

Question 46. Calculate the heat of neutralization from the following data: 200 mL of 1 M HCl is mixed with 400 mL of 0.5 M NaOH. The temperature rise in calorimeter was found to be 4.4°C. Water equivalent of calorimeter is 12 g and specific heat is 1 cal/mL − degree for solution.

Solution. Given total solution = 200 + 400 = 600 mL.
200 mL of 1 M HCl neutralizes 400 mL of 0.5 M NaOH. Meq. = N × V, so Meq. of acid and base = 200 (monovalent).
200 Meq. of HCl react with 200 Meq. of NaOH to produce heat = ΔH; 1000 Meq. of HCl + 1000 Meq. NaOH will give heat = 5 × ΔH, i.e. heat of neutralization.
ΔH, i.e. heat produced in neutralization of 200 Meq. of acid and base = heat taken up by calorimeter + solution = m1s1ΔT + m2s2ΔT = 12 × 4.4 + 600 × 1 × 4.4 = 2692.8 cal.
Heat of neutralization = −5 × 2692.8 cal = −13.464 kcal.

Teacher's Note: Scale heat from 0.2 equivalent to one equivalent; include the calorimeter's water equivalent.

Exam Note: Multiply by 5: only 0.2 equivalent reacted.

Question 47. Calculate ΔH° for 2Al + Fe2O3 → 2Fe + Al2O3 given that standard enthalpy of Fe2O3 and Al2O3 are −196.5 and −399.1 kcal.

Solution. ΔH°reaction = ΔH°products − ΔH°reactants = 2 × ΔH°Fe + ΔH°Al2O3 − (2 × ΔH°Al + ΔH°Fe2O3) = 2 × 0 + (−399.1) − (2 × 0) − (−196.5).
ΔH° = −202.6 kcal.
Note: ΔH° for free elements are zero.

Teacher's Note: Elements Al and Fe in standard state contribute zero to the sum.

Exam Note: Products minus reactants; elements contribute zero.

Question 48. Calculate the enthalpy change when 6.80 g of NH3 is passed over heated CuO. The standard heat enthalpies of NH3(g), CuO(s) and H2O(l) are −46.0, −155.0 and −285.0 kJ mol−1 respectively and the change is NH3 + (3/2)CuO → (1/2)N2(g) + (3/2)H2O(l) + (3/2)Cu(s).

Solution. ΔH for change = ΣHproducts − ΣHreactants; Helement = 0 and Hcompound = ΔHf°.
ΔH = (3/2)H°H2O − H°NH3 − (3/2)H°CuO = (3/2)(−285) − (−46) − (3/2)(−155) = −149 kJ.
17 g NH3 brings change in ΔH = 149 kJ, so 6.8 g NH3 brings change in ΔH = 149 × 6.8/17 = 59.6 kJ.
ΔH = −59.6 kJ.

Teacher's Note: First get ΔH per mole of NH3 (17 g), then scale to 6.8 g (0.4 mol).

Exam Note: Scale by 6.8/17 = 0.4 mol NH₃.

Question 49. Calculate the enthalpy change when infinitely dilute solutions of CaCl2 and Na2CO3 are mixed. ΔHf° for Ca2+(aq.), CO32−(aq.) and CaCO3(s) are −129.80, −161.65 and −288.50 kcal mol−1 respectively.

Solution. CaCl2 + Na2CO3 → CaCO3 + 2NaCl. Solutions are very dilute, so 100% dissociation occurs: Ca2+(aq.) + 2Cl−(aq.) + 2Na+(aq.) + CO32−(aq.) → CaCO3(s) + 2Na+(aq.) + 2Cl−(aq.), or Ca2+(aq.) + CO32−(aq.) → CaCO3(s).
ΔH = ΣΔHproducts − ΣΔHreactants = ΔHf°(CaCO3) − [ΔHf°(Ca2+) + ΔHf°(CO32−)] = −288.5 − (−129.80 − 161.65) = +2.95 kcal.

Teacher's Note: Spectator ions cancel in infinitely dilute solutions; only precipitation of CaCO3 counts.

Exam Note: Write the net ionic equation first; Na⁺ and Cl⁻ cancel.

Question 50. The bond dissociation energy of gaseous H2, Cl2 and HCl are 104, 58 and 103 kcal mol−1 respectively. Calculate the enthalpy of formation for HCl gas.

Solution. H2(g) → 2H(g); ΔH = 104 kcal ...(1); Cl2(g) → 2Cl(g); ΔH = 58 kcal ...(2); HCl(g) → H(g) + Cl(g); ΔH = 103 kcal ...(3).
Divide Eqs. (1) and (2) by 2 and then add: (1/2)H2(g) + (1/2)Cl2(g) → H(g) + Cl(g); ΔH = 81 kcal ...(4).
Subtracting Eq. (3) from Eq. (4): (1/2)H2(g) + (1/2)Cl2(g) → HCl(g); ΔH = −22.0 kcal.
Enthalpy of formation for HCl gas = −22.0 kcal.

Teacher's Note: Formation from bond energies: half bonds broken in H2 and Cl2 minus HCl bond formed.

Exam Note: Half of each diatomic bond energy, minus the HCl bond energy.

Question 51. Calculate the C—C bond energy from the following data: (a) C(s) → C(g); ΔH = 170.9 kcal (b) (1/2)H2 → H(g); ΔH = 52.1 kcal (c) Heat of formation of ethane = −20.3 kcal (d) C—H bond energy = 99.0 kcal

Solution. 2C + 3H2 → C2H6; ΔH = −20.3 kcal.
ΔH = −[eC−C + 6eC−H] + [2(C(s) → C(g)) + 3eH−H]
−20.3 = −[eC−C + 6 × 99] + [2 × 170.9 + 3 × (2 × 52.1)]
eC−C = −594 + 341.8 + 312.6 + 20.3 = 80.7 kcal.
C—C bond energy = 80.7 kcal.

Teacher's Note: Formation from atoms: bonds formed give negative energy; atomisation heats give positive.

Exam Note: H–H bond energy is twice 52.1 kcal.

Question 52. Heat of combustion of n-propane and n-butane are −a kcal and −b kcal per mole respectively. Calculate approximate value of heat of combustion of n-decane.

Solution. ΔcHC3H8 = 2 × ΔcHCH3 unit + 1 × ΔcHCH2 unit = −a
ΔcHC4H10 = 2 × ΔcHCH3 unit + 2 × ΔcHCH2 unit = −b
Therefore ΔcHCH2 = a − b kcal and ΔcHCH3 = (b − 2a)/2 kcal.
ΔcHC10H22 = ΔcHCH3(CH2)8CH3 = 2 × (b − 2a)/2 + 8 × (a − b) = 6a − 7b kcal/mol.

Teacher's Note: Treat the chain as 2 CH3 groups plus CH2 groups; solve for each group's contribution.

Exam Note: Decane has 2 CH₃ and 8 CH₂; use group additivity.

Question 53. The enthalpy change for the following reaction at 25°C are given below: (1/2)H2(g) + (1/2)O2(g) → OH(g); ΔH = −10.06 kcal ...(1); H2(g) → 2H(g); ΔH = 104.18 kcal ...(2); O2(g) → 2O(g); ΔH = 118.32 kcal ...(3). Calculate OH bond energy in hydroxyl radical.

Solution. To find OH(g) → H(g) + O(g); ΔH = ?
Divide Eq. (2) by 2 and Eq. (3) by 2, then add: (1/2)H2(g) + (1/2)O2(g) → H(g) + O(g); ΔH = 111.25 kcal ...(4).
Subtract Eq. (1) from Eq. (4): OH(g) → H(g) + O(g); ΔH = 121.31 kcal.
Bond energy of OH radical = 121.31 kcal.

Teacher's Note: Bond energy is the enthalpy of OH(g) dissociating to atoms; use half of each diatomic's atomisation.

Exam Note: Halve both atomisation enthalpies before adding.

Question 54. Using bond energy data, calculate heat of formation of isoprene. 5C(s) + 4H2(g) → H2C=C(CH3)–CH=CH2 (isoprene). Given, C—H = 98.8 kcal, H—H = 104 kcal, C—C = 83 kcal, C=C = 147 kcal and C(s) → C(g) = 171 kcal.

Solution. ΔHreaction = bond energy data used for formation of bonds + bond energy data used for dissociation of bond.
Isoprene (C5H8) has 2 C—C, 2 C=C and 8 C—H bonds.
ΔHreaction = −[2(C—C) + 2(C=C) + 8(C—H)] + [5Cs→g + 4(H—H)] = −[2 × 83 + 2 × 147 + 8 × 98.8] + [5 × 171 + 4 × 104] = +20.6 kcal.

Teacher's Note: Atomise carbon and hydrogen first (positive), then subtract energy released forming all bonds in isoprene.

Exam Note: Count bonds: 2 C–C, 2 C=C, 8 C–H.

Question 55. The dissociation energy of CH4 is 360 kcal/mol and of ethane is 620 kcal/mol. Calculate C—C bond energy.

Solution. CH4 → C + 4H; ΔH = 360 kcal. Bond energy of 4(C—H) bond = 360 kcal, so bond energy of C—H bond = 360/4 = 90 kcal.
In C2H6 → 2C + 6H, bond energy of C2H6 = 1(C—C) + 6(C—H): 620 = 1(C—C) + 6 × 90.
C—C = 620 − 540 = 80 kcal. Bond energy of C—C = 80 kcal.

Teacher's Note: Average C–H energy from methane; subtract six of them from ethane's total.

Exam Note: Total atomisation of ethane = C–C + 6 C–H.

Question 56. The heat of combustion of acetylene is 312 kcal. If heat of formation of CO2 and H2O are 94.38 and 68.38 kcal respectively, calculate C≡C bond energy. Given heat of atomisation of C and H are 150.0 and 51.5 kcal respectively and C—H bond energy is 93.64 kcal.

Solution. C2H2 + (5/2)O2 → 2CO2 + H2O; ΔH = −312 kcal ...(1) (heat of combustion is exothermic); C + O2 → CO2; −94.38 kcal ...(2); H2 + (1/2)O2 → H2O; −68.38 kcal ...(3).
Multiply (2) by 2 and add (3): 2C + (5/2)O2 + H2 → 2CO2 + H2O; ΔH = −257.14 kcal ...(4). Subtract (1) from (4): 2C + H2 → C2H2; ΔH = +54.86 kcal ...(5).
Also, ΔH for 2C + H2 → C2H2 = −[1(C≡C) + 2(C—H)] + [2(Cs→g) + 1(H—H)]. Given Cs→g = 150 kcal, (1/2)H2 → H = 51.5 kcal, so eH−H = 51.5 × 2 = 103.0 kcal; eC−H = 93.64 kcal.
54.86 = −[1(C≡C) + 2 × 93.64] + [2 × 150 + 1 × 103.0]
eC≡C = 160.86 kcal.

Teacher's Note: First derive ΔHf of acetylene from combustion data; then use the atomisation cycle for bond energy.

Exam Note: H–H bond energy is twice 51.5 kcal.

Question 57. Calculate enthalpy change of the following reaction: H2C=CH2(g) + H2(g) → H3C—CH3(g). The bond energy of C—H, C—C, C=C and H—H are 414, 347, 615 and 435 kJ mol−1 respectively. (Roorkee 1985)

Solution. ΔHreaction = bond energy data for formation of bond + bond energy data for dissociation of bond = −[1(C—C) + 6(C—H)] + [1(C=C) + 4(C—H) + 1(H—H)] = −1(C—C) − 2 × (C—H) + 1(C=C) + 1(H—H) = −347 − 2 × 414 + 615 + 435 = −125 kJ.
Enthalpy change for the reaction = −125 kJ.

Teacher's Note: Bonds broken minus bonds formed: C=C and H–H broken; one C–C and two new C–H formed.

Exam Note: Net: 615 + 435 broken, 347 + 828 formed.

Question 58. Heat of atomisation of NH3 and N2H4 are x and y kcal mol−1 respectively. Calculate average bond energy of N—N bond.

Solution. NH3 → N(g) + 3H(g); ΔH1 = x kcal mol−1; N2H4 → 2N(g) + 4H(g); ΔH2 = y kcal mol−1.
ΔH1 = 3 × eN−H = x ...(1); ΔH2 = 4 × eN−H + eN−N = y ...(2).
From Eqs. (1) and (2): y = 4x/3 + eN−N, so eN−N = y − 4x/3 = (3y − 4x)/3 kcal mol−1.

Teacher's Note: NH3 gives the N–H energy (x/3); hydrazine has four N–H bonds and one N–N.

Exam Note: Express e(N–H) = x/3 first, then solve.

Question 59. Using the data (all values in kcal mol−1 at 25°C) given below, calculate bond energy of C—C and C—H bonds. C(s) → C(g); ΔH = 172; H2 → 2H; ΔH = 104; H2 + (1/2)O2 → H2O(l); ΔH = −68.0; C(s) + O2 → CO2; ΔH = −94.0. Heat of combustion of C2H6 = −372.0. Heat of combustion of C3H8 = −530.0. (IIT 1990)

Solution. For C2H6: 2C + 3H2 → C2H6; ΔH1. For C3H8: 3C + 4H2 → C3H8; ΔH2.
Let C—C bond energy be a kcal and C—H bond energy be b kcal.
ΔH1 = −[a + 6b] + [2 × 172 + 3 × 104] ...(3); ΔH2 = −[2a + 8b] + [3 × 172 + 4 × 104] ...(4).
From C + O2 → CO2; −94.0 ...(5); H2 + (1/2)O2 → H2O; −68.0 ...(6); C2H6 + (7/2)O2 → 2CO2 + 3H2O; −372 ...(7); C3H8 + 5O2 → 3CO2 + 4H2O; −530 ...(8).
Multiply (5) by 2 and (6) by 3, then add: 2C + 3H2 + (7/2)O2 → 2CO2 + 3H2O; ΔH = −392 kcal ...(9). Subtract (7) from (9): 2C + 3H2 → C2H6; ΔH1 = −20 kcal ...(10).
Similarly, multiplying (5) by 3 and (6) by 4, adding and subtracting (8): 3C + 4H2 → C3H8; ΔH2 = −24 kcal ...(11).
By Eqs. (3), (4), (10) and (11): a + 6b = 676 and 2a + 8b = 956, so a = 82 kcal and b = 99 kcal.
Bond energy of C—C bond = 82 kcal; bond energy of C—H bond = 99 kcal.

Teacher's Note: Two unknowns need two compounds: ethane and propane give two linear equations in C–C and C–H.

Exam Note: Solve the two equations.

Question 60. The standard molar enthalpies of formation of cyclohexane (l) and benzene (l) at 25°C are −156 and +49 kJ mol−1 respectively. The standard enthalpy of hydrogenation of cyclohexene (l) at 25°C is −119 kJ mol−1. Use these data to estimate the magnitude of the resonance energy of benzene. (IIT 1996)

Solution. C6H10 + H2 → C6H12; ΔH = −119 kJ (involves breaking up of one double bond and addition of one H2 molecule).
C6H6 + 3H2 → C6H12; ΔH = 3 × (−119) = −357 kJ (involves breaking up of three double bonds and addition of three H2 molecules).
Also given 6C + 6H2 → C6H12(l); ΔH = −156. Subtracting: 6C + 3H2 → C6H6; ΔH = +201 kJ (theoretical).
Therefore resonance energy = 49 − 201 = −152 kJ (experimental − theoretical); magnitude 152 kJ.

Teacher's Note: Theoretical hydrogenation of three isolated C=C is 3 × (−119); resonance energy is the difference from the experiment.

Exam Note: Quote magnitude 152 kJ/mol; benzene is more stable.

Question 61. Calculate the resonance energy of N2O from the following data: ΔHf° of N2O is 82 kJ mol−1. N≡N 946 kJ mol−1, N=N 418 kJ mol−1, O=O 498 kJ mol−1, N=O 607 kJ mol−1. (Roorkee 1991)

Solution. For N2 + (1/2)O2 → N2O; ΔHexp = 82 kJ.
From bond energy data, using the N=N=O structure for N2O: ΔHf cal = −[1(N=N) + 1(N=O)] + [(N≡N) + (1/2)(O=O)] = −[418 + 607] + [946 + (1/2)(498)] = +170 kJ.
Resonance energy = Exp. ΔHf N2O − Calculated ΔHf N2O = 82 − 170 = −88 kJ mol−1.

Teacher's Note: Resonance energy is experimental ΔHf minus the value calculated for the single contributing structure.

Exam Note: Negative value means resonance stabilises N₂O by 88 kJ/mol.

Question 62. Compute the heat of formation of liquid methyl alcohol in kilojoule per mol, using the following data. Heat of vaporisation of liquid methyl alcohol = 38 kJ/mol. Heat of formation of gaseous atoms from the elements in their standard states: H, 218 kJ/mol; C, 715 kJ/mol; O, 249 kJ/mol. Average bond energies: C—H, 415 kJ/mol; C—O, 356 kJ/mol; O—H, 463 kJ/mol. (IIT July 1997)

Solution. C(s) + 2H2(g) + (1/2)O2(g) → CH3OH(l); ΔH = ?
ΔH = bond energy data for formation + bond energy data for dissociation + energy released during liquefaction = −[3(C—H) + 1(C—O) + 1(O—H)] + [Cs→g + 2(H—H) + atomisation of (1/2)O2 to O] − [CH3OH(g) → CH3OH(l)]
= −[3 × 415 + 356 + 463] + [715 + 2 × 436 + 249] − 38 = −266 kJ mol−1.
(Here H—H = 2 × 218 = 436 kJ/mol, and 249 kJ/mol is the energy to form one mole of O atoms from (1/2)O2. The book's working line prints this term as (1/2) × 249, but its final answer −266 is obtained with 249.)

Teacher's Note: Form gaseous atoms first, then bonds; subtract the 38 kJ released on condensing the gas to liquid.

Exam Note: Do not forget the liquefaction term of −38 kJ.

Question 63. Estimate ΔH for 2C4H10 → C8H18 + H2. Given bond energy of C—C, C—H are 347.3 and 414.2 kJ mol−1. The heat of formation of H-atom is 217.55 kJ mol−1.

Solution. ΔH = bond energy data for formation of bond + bond energy data for dissociation of bond = −[7(C—C) + 18(C—H) + 1(H—H)] + [2{3(C—C) + 10(C—H)}] = −(C—C) + 2(C—H) − (H—H).
Given (1/2)H2 → H; ΔH = 217.55 kJ, so H2 → 2H; ΔH = 2 × 217.55 = 435.1 kJ; BE(H—H) = 435.1 kJ. BE(C—C) = 347.3 kJ; BE(C—H) = 414.2 kJ.
ΔH = −347.3 + 2 × (414.2) − 1 × (435.1) = 46.0 kJ mol−1.

Teacher's Note: Net change: one C–C bond lost, two extra C–H bonds broken, one H–H bond formed.

Exam Note: Bond-energy difference: broken minus formed gives +46.0 kJ.

Question 64. Calculate the resonance energy of C6H6 using Kekule formula for C6H6 from the following data. (1) ΔHf° for C6H6 = −358.5 kJ mol−1 (2) Heat of atomisation of C = 716.8 kJ mol−1 (3) Bond energy of C—H, C—C, C=C and H—H are 490, 340, 620 and 436.9 kJ mol−1 respectively.

Solution. For C6H6: 6C(s) + 3H2(g) → C6H6; ΔHexp = −358.5 kJ (as given in the question).
ΔHcal = [BE data for formation of bonds + BE data for dissociation of bonds] = −[3(C—C) + 3(C=C) + 6(C—H)] + [6Cs→g + 3(H—H)] = −[3 × 340 + 3 × 620 + 6 × 490] + [6 × 716.8 + 3 × 436.9] = ΔHf = −208.5 kJ mol−1.
Resonance energy = Exp. ΔHf − Calculated ΔHf = −358.5 − (−208.5) = −150.0 kJ mol−1.

Teacher's Note: The Kekulé structure has 3 C–C, 3 C=C and 6 C–H bonds. Resonance energy is exp minus calculated.

Exam Note: Count 3 C–C, 3 C=C, 6 C–H bonds.

Question 65. Assume that for a domestic hot water supply 150 kg of water per day must be heated from 10°C to 65°C and gaseous fuel propane C3H8 is used for this purpose. What mole and volume of propane in litre at STP would have to be used for heating domestic water? ΔH for combustion of propane is −2050 kJ and specific heat of water is 4184 × 10−3 kJ/g.

Solution. Temperature rise for water = 55°C; mass of water to be heated = 150 × 103 g.
Heat used for water = m·s·ΔT = 150 × 103 × 4.184 × 10−3 × 55 = 34518 kJ.
For propane: C3H8 + 5O2 → 3CO2 + 4H2O; ΔH = 2050 kJ per mole.
2050 kJ heat is provided by 1 mole C3H8, so 34518 kJ is produced by 34518/2050 = 16.838 mol C3H8.
Volume of C3H8 at STP = 16.838 × 22.4 = 3.77 × 102 litre.

Teacher's Note: Heat for water = m·s·ΔT with ΔT = 55°C; divide by 2050 kJ/mol to get moles.

Exam Note: Use 22.4 L/mol at STP for the volume.

Question 66. A temperature of a bomb calorimeter was found to rise by 1.617 K when a current of 3.20 ampere was passed for 3 seconds from a 12.0 V source. 100 g sample of a liquid (molar mass = 40) is now placed in this calorimeter and a passage of 0.5 ampere current for 3 minutes from a 1.50 V source gave a temperature rise of 0.8°C. What is molar heat capacity of liquid?

Solution. I Case: energy produced during passage of current is used to raise the temperature of calorimeter, Q = I·V·t = m·S·ΔT: 3.20 × 3 × 12.0 = m·S × 1.617, so mScalorimeter = 71.24 J K−1.
II Case: Q1V1t = [mScalorimeter + mSliquid] × ΔT: 0.5 × 1.50 × 3 × 60 = [71.24 + 100 × S] × 0.8, so S = 0.975 J/g.
Molar heat capacity = 0.975 × 40 = 39.0 J mol−1 K−1.
Corrected: the book prints 39.04 J; exact working (S = 0.9751 J g−1 K−1) gives 39.0 J mol−1 K−1 (rounding only).

Teacher's Note: Electrical energy I·V·t calibrates the calorimeter; then the liquid's contribution is found by difference.

Exam Note: Time must be in seconds: 3 min = 180 s.

Question 67. A slice of banana was burnt in a bomb calorimeter producing a temperature rise of 3.05°C. The combustion of 0.316 g of benzoic acid in the same calorimeter produced a temperature rise of 3.24°C. The heat of combustion of benzoic acid at constant volume is −3227 kJ mol−1. If average banana mass is 125 g, how many calories can be obtained from an average banana?

Solution. q = ms·ΔT for combustion of benzoic acid (molar mass 122). (Note: in a bomb calorimeter reaction is made at constant volume.)
0.316 × 3227/122 = ms × 3.24, so water equivalent of bomb calorimeter (ms) = 0.316 × 3227/(122 × 3.24) = 2.58 kJ/°C.
For banana slice: q = ms × ΔT = 2.58 × 3.05 = 7.87 kJ per 2.502 g banana.
Heat produced by 125 g banana = 7.87 × 125/2.502 = 393.18 kJ = 393.18/4.184 kcal = 93.97 kcal.

Teacher's Note: First calibrate the calorimeter with benzoic acid, then scale the banana slice (2.502 g) to 125 g.

Exam Note: Calibrate with benzoic acid; convert kJ to kcal by 4.184.

Question 68. The commercial production of water gas utilizes the reaction under standard conditions: C + H2O(g) → H2 + CO. The heat required for this endothermic reaction may be supplied by adding a limited amount of air and burning some carbon to CO2. How many g of carbon must be burnt to CO2 to provide enough heat for the water gas conversion of 100 g of carbon? Neglect all heat losses to the environment. Also ΔHf° of CO, H2O(g) and CO2 are −110.53, −241.81 and −393.51 kJ/mol respectively.

Solution. C + H2O(g) → H2 + CO; ΔH° = ? (H° for C and H2 are zero).
ΔH° = H°CO − H°H2O = −110.53 − (−241.81) = 131.28 kJ/mol.
Thus ΔH° needed for 100 g carbon = 131.28 × 100/12 kJ.
Now 393.51 kJ energy is provided by 12 g C, so 131.28 × 100/12 kJ energy is provided by 12 × 131.28 × 100/(12 × 393.51) = 33.36 g carbon.

Teacher's Note: Endothermic water-gas step needs 131.28 kJ per mole C; burning C to CO2 supplies 393.51 kJ per mole.

Exam Note: Ratio 131.28/393.51 times 100 g gives 33.36 g.

Question 69. The specific heat at constant volume for a gas 0.075 cal/g and at constant pressure is 0.125 cal/g. Calculate: (i) the molar mass of gas (ii) atomicity of gas (iii) No. of atoms of gas in its 1 mole.

Solution. Specific heat at const. P: cp = 0.125 cal/g; at const. V: cv = 0.075 cal/g.
(i) cp − cv = R/M, so 0.125 − 0.075 = 2/M; M = 40.
(ii) For atomicity, γ = cp/cv = 0.125/0.075 = 1.66. Gas is monoatomic.
(iii) Being monoatomic, 1 molecule of gas has 1 atom. No. of atoms of gas in 1 mole = 6.023 × 1023 atoms.

Teacher's Note: γ = 1.66 identifies a monoatomic gas; R = 2 cal/mol K is used for M.

Exam Note: γ = 1.66 means monoatomic; say so explicitly.

Question 70. In order to get maximum calorific output, a burner should have an optimum fuel to oxygen ratio which corresponds to 3 times as much oxygen as is required theoretically for complete combustion of the fuel. A burner, which has been adjusted for methane as fuel (with X litre/hour of CH4 and 6X litre/hour of O2), is to be readjusted for butane C4H10. In order to get same calorific output, what should be the rate of supply of butane and oxygen. Assume that losses due to incomplete combustion, etc., are the same for both fuels and that gases behave ideally. Heats of combustion CH4 = 809 kJ mol−1; C4H10 = 2878 kJ mol−1. (IIT 1993)

Solution. CH4 + 2O2 → CO2 + 2H2O; ΔH = −809 kJ mol−1. Initial volume/hr: X and 6X litre.
Let the temperature be T and assume volume of 1 mole of a gas is V litre at this condition. V litre or 1 mole CH4 gives energy on combustion = 809 kJ, so X litre of CH4 gives 809X/V kJ.
2878 kJ is obtained by 1 mole or V litre C4H10, so 809X/V kJ is obtained by 809X × V/(V × 2878) litre = 0.281X litre C4H10.
Thus butane supplied for same calorific output = 0.281X litre/hr.
C4H10 + (13/2)O2 → 4CO2 + 5H2O. Volume of O2 required = 3 × vol. of O2 for combustion of C4H10 = 3 × (13/2) × 0.281X = 5.48X litre/hr.

Teacher's Note: Equal heat output means volumes scale inversely with heats of combustion; oxygen is 3× the stoichiometric need.

Exam Note: Stoichiometric O2 for butane is 13/2 per mole, then multiply by 3.

Question 71. From the following data of ΔH, of the following reactions, C(s) + (1/2)O2(g) → CO(g); ΔH = −110 kJ; C(s) + H2O(g) → CO(g) + H2(g); ΔH = 132 kJ. Calculate the mole composition of the mixture of steam and oxygen on being passed over coke at 1273 K, keeping temperature constant.

Solution. The first reaction is exothermic and the second one is endothermic. If a mixture of steam and O2 is passed over coke and temperature is kept constant, then the heat of each to CO should not show any heat change, i.e. total heat evolved in I = total heat absorbed in II.
n1 × 2 × 110 = n2 × 132 (each mole of O2 gives 2 mol CO with 2 × 110 kJ),
n1/n2 = 132/(110 × 2) = 0.6/1,
where n1 and n2 are moles of O2 and H2O used during reaction. So the mixture has O2 : H2O = 0.6 : 1 (mole fractions about 0.375 O2 and 0.625 steam).

Teacher's Note: Constant temperature means heat released by oxygen route equals heat absorbed by steam route.

Exam Note: One mole O₂ burns two moles C, releasing 220 kJ.

Question 72. A person inhales 640 g of O2 per day. If all the O2 is used for converting sugar into CO2 and H2O, how much sucrose (C12H22O11) is consumed in the body in one day and what is the heat evolved? ΔHcombustion of sucrose = −5645 kJ mol−1.

Solution. C12H22O11 + 12O2 → 12CO2 + 11H2O; ΔH = −5645 kJ.
Mole of O2 used per day = 640/32 = 20. Mole of sucrose used per day = 20/12 mole = (20/12) × 342 g = 570 g.
Also ΔH = 5645 × 20/12 = 9408.33 kJ (heat evolved).

Teacher's Note: 12 mol O2 burn each mole of sucrose; scale 20 mol O2 accordingly.

Exam Note: Molar mass of sucrose is 342 g/mol.

Question 73. When 12.0 g of carbon reacted with oxygen to form CO and CO2 at 25°C and constant pressure, 75.0 kcal of heat was liberated and no carbon remained. Calculate the mass of oxygen needed for it and the mole of CO and CO2 formed. Given ΔHf CO2 = −94.05 and ΔHf CO = −26.41 kcal mol−1.

Solution. C + O2 → CO2; ΔH = −94.05 kcal. C + (1/2)O2 → CO; ΔH = −26.41 kcal.
Let a mole of carbon react to form CO2 and b mole of carbon react to form CO. Since only 12 g carbon, i.e. 1 mole is used up: a + b = 12/12 = 1 ...(1). Also a × 94.05 + b × 26.41 = 75 ...(2).
So a = 0.718, i.e. mole of CO2 formed = 0.718; b = 0.282, i.e. mole of CO formed = 0.282.
Mole of O2 used for this change = 0.718 + 0.282/2 = 0.859. Mass of O2 used = 0.859 × 32 = 27.49 g.

Teacher's Note: Two unknowns (moles to CO2 and to CO) from carbon balance and heat balance.

Exam Note: Oxygen: one mole per CO₂, half mole per CO.

Question 74. 1.0 g magnesium atoms in vapour phase absorbs 50.0 kJ of energy to convert all Mg into Mg ions. The energy absorbed is needed for the following changes: Mg(g) → Mg+(g) + e; ΔH = 740 kJ mol−1; Mg+(g) → Mg2+(g) + e; ΔH = 1450 kJ mol−1. Find out the % of Mg+ and Mg2+ in final mixture.

Solution. Total mole of Mg = 1/24. Let a mole of Mg+ and b mole of Mg2+ be present: a + b = 1/24 ...(1).
Also, 50 = a × 740 + b × 2190 ...(2) (Mg → Mg2+ needs 740 + 1450 = 2190 kJ mol−1).
From Eqs. (1) and (2): a = 2.845 × 10−2, b = 1.322 × 10−2.
% of Mg+ = 68.28%; % of Mg2+ = 31.72%.

Teacher's Note: Forming Mg²⁺ needs both ionisation steps: 740 + 1450 = 2190 kJ/mol.

Exam Note: Total moles 1/24; energy equation gives the split.

Question 75. Estimate the average S—F bond energy in SF6. The standard heat of formation values of SF6(g), S(g) and F(g) are −1100, 275 and 80 kJ mol−1 respectively. (IIT 1999)

Solution. Given: S(s) + 3F2(g) → SF6; ΔH = −1100 kJ ...(1); S(s) → S(g); ΔH = 275 kJ ...(2); (1/2)F2(g) → F(g); ΔH = 80 kJ ...(3).
To get SF6(g) → S(g) + 6F(g), we can proceed as (2) + 6 × (3) − (1): SF6(g) → S(g) + 6F(g); ΔH = 1855 kJ.
Thus average bond energy = 1855/6 = 309.17 kJ.

Teacher's Note: Atomisation enthalpy of SF6 (1855 kJ) is shared over six S–F bonds.

Exam Note: Divide total atomisation enthalpy by 6 bonds.

Question 76. Consider the following reactions: Au(OH)3 + 4HCl → HAuCl4 + 3H2O; ΔH = −28 kcal; Au(OH)3 + 4HBr → HAuBr4 + 3H2O; ΔH = −36.8 kcal. If 1 mole of HAuBr4 was mixed with 4 mole of HCl, 0.44 kcal heat was absorbed, what fraction of HAuBr4 was converted into HAuCl4? Also report the percentage conversion.

Solution. Au(OH)3 + 4HCl → HAuCl4 + 3H2O; ΔH = −28 kcal. HAuBr4 + 3H2O → Au(OH)3 + 4HBr; ΔH = +36.8 kcal.
Adding: HAuBr4 + 4HCl → HAuCl4 + 4HBr; ΔH = 8.8 kcal.
Fraction of HAuBr4 converted to HAuCl4 = 0.44/8.8 = 0.05.
% of HAuBr4 converted = 0.05 × 100 = 5%.

Teacher's Note: Reverse the second reaction and add: full conversion absorbs 8.8 kcal, so fraction = 0.44/8.8.

Exam Note: Check the sign: reversal makes the bromide step +36.8.

Question 77. The enthalpies of neutralisation of a strong acid HA and weak acid HB by NaOH are −13.68 kcal/eq. and −2.9 kcal/eq. respectively. If one equivalent of HA and one equivalent of HB are mixed with one equivalent of NaOH, the change was found to be −6.9 kcal/eq., calculate the distribution of NaOH between HA and HB.

Solution. Let a eq. of NaOH be used by HA, and b eq. of NaOH be used by HB, with a + b = 1. Heat of dissociation of HB = +13.68 − 2.9 = 10.78 kcal/eq.
Book's working: a × (−13.68) + b × (−2.9) + b × (10.78) = −6.9, i.e. −13.68a + 7.88b = −6.9, giving a = 0.685.
Corrected: −2.9 kcal/eq. is already the observed enthalpy of neutralisation of HB (it includes the dissociation heat), so adding b × 10.78 again double counts. The correct heat balance is a(−13.68) + b(−2.9) = −6.9 with b = 1 − a: −13.68a − 2.9 + 2.9a = −6.9, so −10.78a = −4.0 and a = 0.371, b = 0.629. Thus about 0.371 eq. of NaOH reacts with HA and 0.629 eq. with HB. (Check: 0.371 × 13.68 + 0.629 × 2.9 = 5.08 + 1.82 = 6.9.)

Teacher's Note: Heat observed is the sum of each acid's neutralisation heat weighted by the NaOH it takes up.

Exam Note: Weighted average of −13.68 and −2.9 must equal −6.9.

Question 78. The standard enthalpy of formation of FeO and Fe2O3 is −65 kcal mol−1 and −197 kcal mol−1 respectively. If a mixture containing FeO and Fe2O3 in 2 : 1 mole ratio on oxidation is changed into 1 : 2 mole ratio, how much of thermal energy will be released per mole of the initial mixture?

Solution. Fe + (1/2)O2 → FeO; ΔH = −65 kcal mol−1 ...(i); 2Fe + (3/2)O2 → Fe2O3; ΔH = −197 kcal mol−1 ...(ii).
By Eq. (ii) − 2 × (i): 2FeO + (1/2)O2 → Fe2O3; ΔH = −67 kcal mol−1 ...(iii).
Let a mole of FeO and b mole of Fe2O3 be present such that a + b = 1 and a/b = 2, so a = 2/3 and b = 1/3.
2FeO + (1/2)O2 → Fe2O3: initial a, b; after oxidation (a − 2a′) and (b + a′).
Given (a − 2a′)/(b + a′) = 1/2, so 2a − 4a′ = a/2 + a′, giving a′ = 3a/10 = (3 × 2)/(10 × 3) = 1/5. FeO used = 2a′ = 2/5 mole.
2 mole FeO gives heat = 67 kcal, so 2/5 mole FeO gives heat = 67 × 2/(2 × 5) = 13.4 kcal.

Teacher's Note: Oxidation of FeO to Fe2O3 releases 67 kcal per 2 mol; find the extent from the ratio change.

Exam Note: Take 1 mol initial mixture: 2/3 FeO and 1/3 Fe₂O₃.

Question 79. Ethanol undergoes decomposition to form two sets of products. C2H5OH(g) → C2H4(g) + H2O(g); ΔH° = −45.54 kJ (route 1); C2H5OH(g) → CH3CHO(g) + H2(g); ΔH° = −68.91 kJ (route 2). If the products molar ratio of C2H4 to CH3CHO formed are in the ratio of 8 : 1 in a set of product gas, determine the energy involved in the decomposition of 1 mole of ethanol.

Solution. Let a mole of ethanol be decomposed by Eq. (i) and b mole by Eq. (ii): a + b = 1 ...(iii). Also, the ratio of C2H4 and CH3CHO formed is a/b = 8 ...(iv).
By Eqs. (iii) and (iv): 8b + b = 1, so b = 1/9 and a = 8/9.
ΔH°total = −[45.54 × 8/9 + 68.91 × 1/9] = −48.13 kJ.

Teacher's Note: Product ratio 8:1 equals ratio of moles decomposed by each route; weight the two enthalpies.

Exam Note: Weights are 8/9 and 1/9 of one mole.

Question 80. Calculate the enthalpy change for the reaction: XeF4 → Xe+ + F− + F2 + F; ΔH = ? The average Xe—F bond energy is 34 kcal/mol. IE1 of Xe is 279 kcal/mol and electron affinity of F is 85 kcal/mol and bond dissociation energy of F2 is 38 kcal/mol.

Solution. ΔH = +4 × eXe−F + IE1 Xe − EA1 F − eF−F = 4 × 34 + 279 − 85 − 38 = +292 kcal/mol.

Teacher's Note: Break four Xe–F bonds, ionise Xe, gain an electron on one F, and form one F–F bond.

Exam Note: Bond formation (F–F) and electron gain both subtract.

Question 81. In a constant volume calorimeter, 3.5 g of a gas with molar mass 28 was burnt in excess oxygen at 298.0 K. The temperature of the calorimeter was found to increase from 298.0 K to 298.45 K due to the combustion process. Given that the heat capacity of the calorimeter is 2.5 kJ K−1, the numerical value for the enthalpy of combustion of the gas in kJ mol−1 is: (IIT 2009)

Solution. Heat released during combustion of 3.5 g gas = (mS) × ΔT = 2.5 × 0.45 = 1.125 kJ.
Heat released for combustion of 1 mole (or 28 g) gas = (28/3.5) × 1.125 = 9 kJ mol−1 (numerical value).

Teacher's Note: Calorimeter constant times ΔT gives heat; 3.5 g is 0.125 mol, so scale by 8.

Exam Note: Scale 3.5 g to molar mass 28 g.

Single Integer Answer Problems

Question SI-1. The ΔHf° of BaSO4(s), Ba2+(aq) and SO42−(aq) are −350.6, −128.3 and −216.3 kcal. The heat of reaction (in kcal) is minus: BaCl2(aq.) + H2SO4(aq.) → BaSO4(s) + 2HCl(aq.) is ......

Solution. Answer (from key): Six.
Net reaction: Ba2+(aq) + SO42−(aq) → BaSO4(s); ΔH = −350.6 − (−128.3 − 216.3) = −6.0 kcal, i.e. minus six.

Teacher's Note: Spectator ions cancel; use only Ba²⁺ and sulphate against the solid.

Exam Note: Net ionic equation, products minus reactants.

Question SI-2. The heat evolved in kcal for the process at 25°C of dissolving 1.0 mole of KCl in excess of water as KCl(s) → K+ + Cl− (Given: ΔHf° of K+(aq), Cl−(aq) and KCl(s) are −60, −40 and −104 kcal/mole) is ......

Solution. Answer (from key): Four.
ΔH = (−60 − 40) − (−104) = +4 kcal; the magnitude of the heat change for dissolving 1 mol KCl is 4 kcal (it is absorbed).

Teacher's Note: Dissolution heat = formation sum of ions minus solid. Positive value means heat absorbed.

Exam Note: Magnitude 4 kcal; sign shows endothermic dissolution.

Question SI-3. If ΔHf° of H2S(g) and H2S(aq) are −4.5 and −9.5 kcal. How much heat is required for the change? H2S(aq) → H2S(g)

Solution. Answer (from key): Five.
ΔH = ΔHf(H2S, g) − ΔHf(H2S, aq) = −4.5 − (−9.5) = +5.0 kcal.

Teacher's Note: Heat needed is products minus reactants for the aqueous-to-gas change.

Exam Note: Subtract carefully: −4.5 − (−9.5) = +5.

Question SI-4. If heat of reaction for the given acid base reaction: HA + NaOH → NaA + H2O; ΔH = −4.7 kcal. The heat of dissociation of HA is ......

Solution. Answer (from key): Nine.
Heat of dissociation = (−13.7) − (−4.7), taken as a magnitude: 13.7 − 4.7 = 9.0 kcal (strong acid neutralisation heat −13.7 kcal minus the observed −4.7 kcal).

Teacher's Note: Weak acid neutralisation falls short of −13.7 kcal by exactly its heat of dissociation.

Exam Note: Shortfall from 13.7 kcal gives 9 kcal.

Question SI-5. For a gas the numerical value (in cal) of [(∂H/∂T)P − (∂U/∂T)V] is equal to ......

Solution. Answer (from key): Two.
(∂H/∂T)P = Cp and (∂U/∂T)V = Cv, so the difference is Cp − Cv = R = 2 cal (per mole).

Teacher's Note: Cp − Cv = R for an ideal gas; in calories R ≈ 2.

Exam Note: R = 2 cal mol⁻¹ K⁻¹ is the numerical value.

Question SI-6. The enthalpy changes of some processes are given below: α-D-glucose(s) + H2O → α-D-glucose(aq); Heat of dissolution = 10.84 kJ. β-D-glucose(s) + H2O → β-D-glucose(aq); Heat of dissolution = 4.68 kJ. α-D-glucose(aq) → β-D-glucose(aq); Heat of mutarotation = −1.16 kJ. The ΔH° for α-D-glucose → β-D-glucose is ......

Solution. Answer (from key): Five.
α(s) → α(aq): +10.84; α(aq) → β(aq): −1.16; β(aq) → β(s): −4.68. Sum: 10.84 − 1.16 − 4.68 = +5.0 kJ.

Teacher's Note: Build a cycle: dissolve α solid, mutarotate, then crystallise β (reverse of its dissolution).

Exam Note: Reverse the β dissolution step: sign flips to −4.68.

Question SI-7. 10 mL of dissolution of a strong acid (HA) on mixing with 10 mL of strong alkali (BOH) at the same temperature shows a temperature rise of 4°C. If 50 mL of same acid are mixed with 50 mL of same alkali; the temperature rise will be ...... °C. Assume all the heat produced is used in increasing temperature of mixture only.

Solution. Answer (from key): Four.
Heat produced and total volume both scale by 5, so the temperature rise stays 4°C.

Teacher's Note: Heat and volume scale together, so the temperature rise is unchanged.

Exam Note: Intensive quantity: ΔT unchanged when both scale equally.

Question SI-8. Standard molar heat enthalpy for converting carbon from graphite and diamond form into vapour state directly are 725 and 713 kJ respectively. The standard enthalpy change for polymorphism of 1 g carbon CG→D is ......

Solution. Answer (from key): One.
C(graphite) → C(diamond): ΔH = 725 − 713 = 12 kJ mol−1; for 1 g = 12/12 = 1 kJ.

Teacher's Note: Hess cycle via C(g): graphite to vapour, then vapour to diamond.

Exam Note: Divide 12 kJ/mol by 12 g/mol for per gram.

Question SI-9. If heat of formation of CaCl2 and NaCl are 191 and 97.5 kcal, the heat of reaction for CaCl2 + 2Na → 2NaCl + Ca is ......

Solution. Answer (from key): Four.
ΔH = 2(−97.5) − (−191) = −4 kcal, i.e. 4 kcal evolved.

Teacher's Note: Heat of reaction = 2 × ΔHf(NaCl) − ΔHf(CaCl2).

Exam Note: Mind the coefficient 2 on NaCl.

Question SI-10. The difference of ΔH − ΔU for the given reaction is nRT. The value of n is ...... C6H12O6(s) + 6O2(g) → 6CO2(g) + 6H2Ov

Solution. Answer (from key): Six.
n = Δn(gas) = (6 + 6) − 6 = 6.

Teacher's Note: Water vapour counts as gas here; glucose is solid and is ignored.

Exam Note: Count gaseous moles only: 12 − 6 = 6.

Question SI-11. Heat of combustion of a fuel molar mass 86 is 688 kJ/mole. The calorific value of fuel is ......

Solution. Answer (from key): Eight.
Calorific value = 688/86 = 8 kJ/g.

Teacher's Note: Calorific value is heat per gram: divide by molar mass.

Exam Note: Unit is kJ per gram.

Question SI-12. The combustion of 5.0 g of coke raised the temperature of 1.0 g of water from 10°C to 55°C. If specific heat of water of 1 cal/g, the calorific value of coke is ......

Solution. Answer (from key): Nine.
Heat absorbed = 1.0 × 1 × 45 = 45 cal; calorific value = 45/5.0 = 9 cal/g.

Teacher's Note: Heat absorbed by water divided by mass of coke burnt gives the calorific value.

Exam Note: ΔT = 45°C; result is 9 cal/g as printed.

Question SI-13. The enthalpy change involved in the oxidation of glucose is −2880 kJ mol−1. 25% of this energy is available for muscular work. If 80 kJ of muscular work is needed to walk one km, what is the maximum distance that a person will walk after eating 120 g glucose.

Solution. Answer (from key): Six (km).
Energy for work = 2880 × 0.25 = 720 kJ/mol; for 120 g (2/3 mol) = 480 kJ; distance = 480/80 = 6 km.

Teacher's Note: Take 25% of the molar energy, scale to 120 g, then divide by 80 kJ per km.

Exam Note: Use 80 kJ/km here, not 100 kJ/km.

Question SI-14. Heat of solution of anhydrous CuSO4 is −15.9 kcal and heat of hydration of anhydrous CuSO4 is −18.9 kcal. The heat of solution of CuSO4·5H2O is ......

Solution. Answer (from key): Three.
CuSO4·5H2O → CuSO4 + 5H2O is +18.9; adding dissolution of CuSO4 (−15.9) gives +3.0 kcal.

Teacher's Note: Hydrate dissolution = reverse hydration plus anhydrous dissolution.

Exam Note: Reverse hydration to +18.9, then add −15.9.

Question SI-15. ΔHf° of Fe2O3 and Al2O3 are −189 kJ mol−1 and −405 kJ mol−1 respectively. How much heat (in kJ) is given out during reaction of 1 g Al according to 2Al + Fe2O3 → Al2O3 + 2Fe ?

Solution. Answer (from key): Four.
ΔH = −405 − (−189) = −216 kJ for 2 mol Al (54 g); for 1 g Al = 216/54 = 4 kJ.

Teacher's Note: Heat for 2 mol Al is 216 kJ; divide by 54 g for per gram.

Exam Note: Mass of 2 Al is 54 g, not 27 g.

Question SI-16. How much of the following have their standard heat of formation zero at 298 K: O2(l), Cgraphite, PBlack, Smonoclinic, I2(solid)

Solution. Answer (from key): The key prints Three.
Corrected: standard enthalpy of formation is zero only for an element in its reference standard state. Here these are C(graphite) and I2(s): O2 is a gas in its standard state (so O2(l) is not zero), the reference form of sulphur is rhombic (not monoclinic), and the reference form of phosphorus is white P (the book's own matching question 6 treats P(black) as not zero). So the count is two.

Teacher's Note: Zero applies only to the reference state of each element at 298 K and 1 bar.

Exam Note: Check physical state and allotrope against the reference state.

Question SI-17. How much of the following possess heat of neutralization less than −13.7 kcal. HCl(aq) + NaOH(aq), HF(aq) + NaOH(aq), CH3COOH(aq) + NH4OH(aq), CCl3COOH(aq) + KOH(aq), C6H5COOH(aq) + KOH(aq)

Solution. Answer (from key): Two.
Taking the value as the magnitude of heat released (13.7 kcal for strong acid and strong base): HCl + NaOH gives 13.7; CCl3COOH is a strong acid (about 13.7); HF gives a larger value (16.4 kcal) because of hydration of F−. The two with magnitude below 13.7 kcal are CH3COOH + NH4OH and C6H5COOH + KOH (weak acid or weak base, part of the heat is used for dissociation).

Teacher's Note: Weak acid or weak base neutralisation releases less heat than 13.7 kcal.

Exam Note: Read 'less than' as smaller magnitude of heat released.

Question SI-18. For Au(OH)3 + 4HCl → HAuCl4 + 3H2O; ΔH = −28 kcal and Au(OH)3 + 4HBr → HAuBr4 + 3H2O; ΔH = −36.8 kcal. If 1 mole of HAuBr4 was mixed with 4 mole of HCl, 0.44 kcal heat was absorbed. The percentage conversion of HAuBr4 to HAuCl4 is ......

Solution. Answer (from key): Five.
HAuBr4 + 4HCl → HAuCl4 + 4HBr; ΔH = −28 + 36.8 = +8.8 kcal. Fraction converted = 0.44/8.8 = 0.05, i.e. 5%.

Teacher's Note: Reverse the bromide reaction and add to the chloride one; fraction equals heat absorbed over 8.8 kcal.

Exam Note: Same as numerical problem 76: answer 5%.

Objective Problems (One Answer Correct)

Question OB-1. The eP−H and eP−P are 76 and 51 kcal mol−1. The difference in the heat of atomisation for PH3 and P2H4 in kcal mol−1 is:
(a) 127
(b) 178
(c) 203
(d) 25

Solution. Answer: (a) 127
PH3 → P + 3H; ΔH1 = 3 × 76 = 228 kcal. P2H4 → 2P + 4H; ΔH2 = eP−P + 4eP−H = 51 + 76 × 4 = 355 kcal. ΔH2 − ΔH1 = 355 − 228 = 127 kcal mol−1.

Teacher's Note: Atomisation heat equals the sum of all bond energies in the molecule.

Exam Note: Count 3 P–H versus 1 P–P plus 4 P–H.

Question OB-2. Which of the following will give rise to maximum heat of reaction on mixing?
(a) 100 mL of 0.1 M HCl + 40 mL of 0.1 M NaOH
(b) 60 mL of 0.1 M HCl + 60 mL of 0.1 M NaOH
(c) 40 mL of 0.1 M HCl + 30 mL of 0.1 M NaOH
(d) 40 mL of 0.1 M HCl + 100 mL of 0.1 M NaOH

Solution. Answer: (b)
6 Meq. of HCl will react with 6 Meq. of NaOH to give maximum heat of reaction. (a) neutralises only 4 Meq., (c) 3 Meq. and (d) 4 Meq.

Teacher's Note: Heat is proportional to the equivalents actually neutralised, set by the limiting reagent.

Exam Note: Compare milli-equivalents of the limiting reagent in each.

Question OB-3. The amount of heat released during the reaction of 300 mL of 1 M HCl with 100 mL of 1 M NaOH is:
(a) 57.3 kJ
(b) 5.73 kJ
(c) 573 kJ
(d) 573 × 103 kJ

Solution. Answer: (b) 5.73 kJ
Meq. of NaOH = 100 × 1 = 100; Meq. of HCl = 300 × 1 = 300. So 100 Meq. of HCl will react with 100 Meq. of NaOH. 1000 Meq. react to give 57.27 kJ, therefore 100 Meq. react to give 5.727 kJ.

Teacher's Note: NaOH (100 meq) is limiting; heat is 0.1 of the molar neutralisation enthalpy.

Exam Note: Limiting reagent decides: 0.1 equivalent only.

Question OB-4. Equal volumes of 1 M HCl and 1 M H2SO4 are neutralised by dilute NaOH solution producing X and Y kcal of heat respectively, then (Y − X) is:
(a) 1 Y
(b) 0.5 Y
(c) 0.1 Y
(d) 5 Y

Solution. Answer: (b) 0.5 Y
1 M HCl = 1 N HCl, i.e. 1 × V Meq. gives heat = X kcal. 1 M H2SO4 = 2 N H2SO4, i.e. 2 × V Meq. gives heat = Y kcal. Thus Y = 2X, or X = 0.5Y, and Y − X = Y − 0.5Y = 0.5Y.

Teacher's Note: H2SO4 is dibasic so 1 M means 2 N; heat doubles.

Exam Note: Convert molarity to normality first.

Question OB-5. A solution of 200 mL of 1 M KOH is added to 200 mL of 1 M HCl and the mixture after attaining reaction equilibrium shows a rise in temperature by ΔT1. The experiment is repeated by using 50 mL of 1 M KOH and 50 mL 1 M HCl which at equilibrium shows a rise in temperature by ΔT2. Thus:
(a) ΔT1 = ΔT2
(b) ΔT1 = 4 × ΔT2
(c) ΔT1 = 2 × ΔT2
(d) ΔT1 > ΔT2

Solution. Answer: (a)
No doubt more heat will be liberated in the first reaction, which will be used to heat the mixture (400 mL). In the second, heat liberated will be 1/4 of the first and will be used to heat 1/4 of the mixture (100 mL). So the temperature rise is the same.

Teacher's Note: Heat and heated volume both scale by four, so temperature rise is unchanged.

Exam Note: Heat per mL of mixture is identical in both runs.

Question OB-6. Given: HCl(g) + 40H2O → HCl(40H2O); ΔH = −73.0 kJ. HCl(g) + 10H2O → HCl(10H2O); ΔH = −69.0 kJ. Then integral heat of dilution for two moles of HCl(10H2O) to HCl(40H2O) is:
(a) −4.5 kJ
(b) −3.5 kJ
(c) −8.0 kJ
(d) −2.0 kJ

Solution. Answer: (c) −8.0 kJ
Integral heat of dilution is the change in enthalpy when a solution containing 1 mole of a solute is diluted from one concentration to other. For one mole: −73.0 − (−69.0) = −4.0 kJ; for two moles −8.0 kJ.

Teacher's Note: Subtract the two integral heats of solution; then multiply by moles.

Exam Note: Remember the factor of two moles of HCl.

Question OB-7. Heat of neutralisation for weak acid HF is:
(a) 13.7 kcal
(b) > 13.7 kcal
(c) < 13.7 kcal
(d) either of these

Solution. Answer: (b) > 13.7 kcal
Due to extensive hydration of F− ion because of smallest size, the heat of neutralisation of HF exceeds the strong acid value (about 16.4 kcal per equivalent).

Teacher's Note: HF is the exception: small F⁻ hydrates strongly, so heat exceeds 13.7 kcal.

Exam Note: HF is weak yet gives more than 13.7 kcal.

Question OB-8. Molar heat capacity of water in equilibrium water ⇌ vapours at constant pressure is:
(a) zero
(b) infinity
(c) 80/18 cal/mol
(d) 540/18 cal/mol

Solution. Answer: (b) infinity
Cp = (∂H/∂T)p; at equilibrium T is constant, i.e. the molar heat capacity of equilibrium is infinity.

Teacher's Note: During a phase change heat is absorbed at constant T, so dq/dT diverges.

Exam Note: Phase transitions at constant T give infinite Cp.

Question OB-9. Which of the following is not endothermic?
(a) C + 2S → CS2
(b) F2 + (1/2)O2 → F2O
(c) N2 + (1/2)O2 → N2O
(d) H2 + (1/2)O2 → H2O

Solution. Answer: (d)
Rest all are endothermic; the formation of H2O is exothermic (ΔHf = −68.3 kcal).

Teacher's Note: CS2, F2O and N2O have positive formation enthalpies; water does not.

Exam Note: Know ΔHf signs of common oxides.

Question OB-10. Two moles of CO and 1 mole of O2 were allowed to react completely to form CO2 at 300 K. If the heat liberated during the course of reaction 2CO + O2 → 2CO2 at constant pressure is 560 kJ, the amount of heat liberated by carrying the reaction in 1 litre vessel will be: (1 litre-atm = 0.1 kJ)
(a) + 58 kJ
(b) + 535.37 kJ
(c) + 557.54 kJ
(d) + 55.75 kJ

Solution. Answer: (c) + 557.54 kJ
ΔH = ΔU + ΔnRT with Δn = −1: −560 = ΔU − 1 × 0.0821 × 300 (L-atm) = ΔU − 24.62 L-atm = ΔU − 2.463 kJ, so ΔU = −557.54 kJ. Heat liberated at constant volume = 557.54 kJ.

Teacher's Note: At constant volume heat equals ΔU; Δn = −1 makes it smaller than ΔH.

Exam Note: Convert RT in L-atm to kJ using 0.1 kJ/L-atm.

Question OB-11. One mole of ice melts at 0°C and 1 atm absorbing 1440 cal of heat. The molar volume of ice and water are 0.0196 and 0.0180 litre respectively. The ΔU for the change is:
(a) ≃ 1440 cal
(b) >> 1400 cal
(c) << 1440 cal
(d) = 1440 cal

Solution. Answer: (a) ≃ 1440 cal
ΔH = ΔU + PΔV; PΔV = 76 × 13.6 × 981 × (18 − 19.6) erg = −1.62 × 106 erg = −1.62 × 106/(4.18 × 107) cal = −0.039 cal. So ΔU = 1440 + 0.039 cal ≃ ΔH.

Teacher's Note: The volume change on melting is tiny, so PΔV is negligible.

Exam Note: Only 'approximately equal' is exact; (d) is too strict.

Question OB-12. The combustion of 10.0 g coke raised the temperature of 1.0 kg water from 10°C to 50°C. If specific heat of H2O is 1 cal/g then the fuel value of coke is:
(a) 1000 cal
(b) 2000 cal
(c) 3000 cal
(d) 4000 cal

Solution. Answer: (d) 4000 cal
Heat supplied to heat water = 1000 × 1 × 40 = 40 × 103 cal. Calorific value = ΔH/mass of fuel = 40 × 103/10 = 4000 cal (per g).

Teacher's Note: Fuel value is heat per gram of fuel burnt.

Exam Note: ΔT = 40°C; divide by 10 g.

Question OB-13. Molar heat capacity of water in equilibrium with the ice at constant pressure is:
(a) zero
(b) infinity (∞)
(c) 40.45 kJ K−1 mol−1
(d) 75.48 J K−1 mol−1

Solution. Answer: (b) infinity
Cp = (∂H/∂T)p; at equilibrium T is constant, i.e. ∂T = 0; thus Cp = ∞.

Teacher's Note: At the melting point heat goes into fusion with no temperature change.

Exam Note: Zero ΔT gives an infinite heat capacity.

Question OB-14. Standard molar enthalpy of formation of CO2 is equal to:
(a) zero
(b) the standard molar enthalpy of combustion
(c) the sum of standard molar enthalpies of formation of CO and O2
(d) the standard molar enthalpy of combustion of carbon (graphite)

Solution. Answer: (d)
Standard molar heat enthalpy (H°) of a compound is equal to its standard heat of formation from most stable states of initial components; C(graphite) + O2 → CO2 defines both.

Teacher's Note: Burning graphite is exactly the formation reaction of CO2.

Exam Note: Option (b) is wrong: not every substance's combustion equals formation.

Question OB-15. For the reaction, 2O3 → 3O2, ΔH, ΔS and ΔG are respectively:
(a) +ve, +ve, +ve
(b) −ve, +ve, −ve
(c) −ve, −ve, +ve
(d) +ve, −ve, −ve

Solution. Answer: (b) −ve, +ve, −ve
2O3 → 3O2; ΔH = −68 kcal (exothermic); ΔS = +ve because moles of gas increase from 2 to 3; so ΔG = ΔH − TΔS is negative.

Teacher's Note: Ozone decomposition releases heat and raises gas moles; both favour spontaneity.

Exam Note: Signs: ΔH negative, ΔS positive, hence ΔG negative.

Question OB-16. For the reaction, 2Br(g) → Br2(l), ΔH and ΔS are:
(a) −ve, −ve
(b) +ve, −ve
(c) −ve, +ve
(d) +ve, +ve

Solution. Answer: (a) −ve, −ve
Bond formation shows ΔH = −ve; also entropy in the liquid state is lesser than in the gaseous state, so ΔS = −ve.

Teacher's Note: Atoms combining into a bond release energy and lose gaseous freedom.

Exam Note: Bond formation is exothermic; gas to liquid lowers entropy.

Question OB-17. A reaction X → Y involves three steps. If X → A; ΔH = −a kcal ...(i); B → A; ΔH = −b kcal ...(ii); B → Y; ΔH = −c kcal ...(iii), then ΔH for X → Y is:
(a) a + b + c
(b) b − a − c
(c) a + b − c
(d) c + b − a

Solution. Answer: (b) b − a − c
By (i) − (ii) + (iii): X → A, A → B (+b), B → Y gives ΔH = −a + b − c = b − a − c.

Teacher's Note: Reverse step (ii) to go from A to B, then add the three steps.

Exam Note: Reversing flips the sign of −b to +b.

Question OB-18. Which of the following reaction shows standard enthalpy of formation of CH3Cl(g), if reactions are made at 1 atm and 25°C:
(a) CH4(g) + Cl2(g) → CH3Cl(g) + HCl(g)
(b) C(G) + (3/2)H2(g) + (1/2)Cl2(g) → CH3Cl(g)
(c) C(D) + (3/2)H2(g) + (1/2)Cl2(g) → CH3Cl(g)
(d) C(S) + (3/2)H2(g) + (1/2)Cl2(g) → CH3Cl(g)

Solution. Answer: (b)
Carbon in graphite form (the stable standard state) has H° = 0, so only (b) forms CH3Cl from elements in their standard states.

Teacher's Note: Formation reactions start from elements in standard states: graphite, not diamond.

Exam Note: Option (a) is not formation from elements.

Question OB-19. If ΔfH° of C2H4(g) and ΔfH° of C2H6(g) are q1 and q2 kcal mol−1, then heat of hydrogenation of C2H4(g) is:
(a) q2 − q1
(b) q2 + q1
(c) q1 + 2q2
(d) q1 − q2

Solution. Answer: (a) q2 − q1
2C + 3H2 → C2H6; ΔH = q2. 2C + 2H2 → C2H4; ΔH = q1. Subtracting: C2H4 + H2 → C2H6; ΔH = q2 − q1.

Teacher's Note: Hydrogenation enthalpy equals product formation minus reactant formation (H2 contributes zero).

Exam Note: Products minus reactants: q₂ − q₁.

Question OB-20. If heat of formation of NH3(g) is −46 kJ mol−1, then ΔH for the reaction: 2NH3 ⇌ N2 + 3H2 is:
(a) +46 kJ
(b) +92 kJ
(c) −92 kJ
(d) None of these

Solution. Answer: (b) +92 kJ
(1/2)N2 + (3/2)H2 → NH3; ΔH = −46 kJ. The reverse for 2 mol of NH3 (decomposition) is 2 × (+46) = +92 kJ.

Teacher's Note: Decomposition is the reverse of formation, and two moles double it.

Exam Note: Reverse the sign and double: +92 kJ.

Question OB-21. eH−H is 436.4 kJ, then heat of formation of H atom is:
(a) 872.8 kJ mol−1
(b) −218.2 kJ mol−1
(c) +218.2 kJ mol−1
(d) −436.4 kJ mol−1

Solution. Answer: (c) +218.2 kJ mol−1
eH−H = heat of formation of H atom × 2 (from (1/2)H2 → H), so ΔfH = 436.4/2 = +218.2 kJ mol−1.

Teacher's Note: One mole of H atoms comes from half a mole of H₂, so half the bond energy.

Exam Note: Divide by 2; sign positive because bond breaking absorbs heat.

Question OB-22. The amount of heat released when 20 mL of 0.5 M NaOH is mixed with 100 mL of 0.1 M HCl is x kJ. The heat of neutralisation (in kJ) is:
(a) −100x
(b) −50x
(c) 100x
(d) 50x

Solution. Answer: (a) −100x
Meq. of NaOH = 20 × 0.5 = 10; Meq. of HCl = 100 × 0.1 = 10. 10 Meq. (HCl + NaOH) each react to give x kJ, so 1000 Meq. each react to give 100x kJ. Heat of neutralisation = −100x.

Teacher's Note: Both reagents give 10 meq, so x kJ corresponds to 0.01 equivalent; scale by 100.

Exam Note: Heat of neutralisation is per equivalent and negative.

Question OB-23. For the reactions: A → B; ΔH = +24 kJ mol−1; B → C; ΔH = −18 kJ mol−1. The decreasing order of enthalpy of A, B, C is:
(a) A > B > C
(b) B > C > A
(c) C > B > A
(d) C > A > B

Solution. Answer: (b) B > C > A
HB > HA (HB − HA = 24); HC < HB (HB − HC = 18); so HB > HC > HA.

Teacher's Note: Place A at 0: B at +24, C at +6, so B > C > A.

Exam Note: Put A at zero and track each step.

Question OB-24. One g sample of NH4NO3(s) is decomposed (NH4NO3(s) → N2O(g) + 2H2O(g)) in bomb calorimeter. The temperature of calorimeter increases by 6.12 K. The heat capacity of system is 1.23 kJ/g/°. The molar heat of decomposition is:
(a) −7.5 kJ
(b) +7.5 kJ
(c) −16.1 kJ
(d) +16.1 kJ

Solution. Answer: (a) −7.5 kJ
ΔU = 1.23 × 103 × 6.12 J = 7.5 × 103 J = −7.5 kJ. Heat is given out, and thus ΔU = −7.5 kJ (this is the value for the 1 g sample as printed in the book; with molar mass 80 g/mol the per-mole value would be about −600 kJ, which is not among the options).

Teacher's Note: Bomb calorimeter heat is ΔU; the sign is negative because heat is given out.

Exam Note: Heat capacity times temperature rise gives magnitude.

Question OB-25. The enthalpy change for the process C(s) → C(g) is called:
(a) heat of vaporisation
(b) heat of atomisation
(c) heat of allotropic change
(d) heat of sublimation

Solution. Answer: (d) heat of sublimation
C is converted directly from solid to gas.

Teacher's Note: Solid to gas directly is sublimation; atomisation is for molecules breaking into atoms.

Exam Note: Solid → gas defines sublimation.

Question OB-26. The difference between heats of reaction at constant pressure and constant volume for the reaction: 2C6H6(l) + 15O2(g) → 12CO2(g) + 6H2O(l) at 25°C in kJ is:
(a) −7.43
(b) +3.72
(c) −3.72
(d) +7.43

Solution. Answer: (a) −7.43
ΔH − ΔU = ΔnRT = (12 − 15) × 8.314 × 298 = −3 × 8.314 × 298 = −7432.7 J = −7.43 kJ.

Teacher's Note: ΔH − ΔU = ΔnRT with Δn = −3 gaseous moles.

Exam Note: Liquid benzene and water are excluded from Δn.

Question OB-27. The products of combustion of an aliphatic thiol at 298 K are:
(a) CO2(g), H2O(g) and SO2(g)
(b) CO2(g), H2O(l) and SO2(g)
(c) CO2(l), H2O(g) and SO2(g)
(d) CO2(g), H2O(l) and SO2(l)

Solution. Answer: (b)
A thiol is RSH; on combustion it gives CO2(g), SO2(g) and H2O, which is liquid at 298 K.

Teacher's Note: At 298 K water is liquid, while CO2 and SO2 are gases.

Exam Note: Check the physical state of each product at 298 K.

Question OB-28. For which change, ΔH ≠ ΔE:
(a) H2 + I2 → 2HI
(b) HCl + NaOH → NaCl + H2O
(c) C(s) + O2(g) → CO2(g)
(d) N2 + 3H2 → 2NH3

Solution. Answer: (d)
ΔH = ΔU + ΔnRT; Δn = −2 in (d); Δn = 0 for (a), (b) and (c).

Teacher's Note: ΔH and ΔU differ only when the number of gaseous moles changes.

Exam Note: Compute Δn for each option.

Question OB-29. Under the same conditions how many mL of 1 M KOH and 0.5 M H2SO4 solution respectively when mixed for a total volume of 100 mL produce the highest rise in temperature:
(a) 67 : 33
(b) 33 : 67
(c) 40 : 60
(d) 50 : 50

Solution. Answer: (d) 50 : 50
50 Meq. of KOH and 50 Meq. of H2SO4 (50 mL of 0.5 M = 50 Meq.) will neutralise completely.

Teacher's Note: Maximum heat arises when acid and base are present in equivalent amounts.

Exam Note: 0.5 M H₂SO₄ is 1 N.

Question OB-30. One mole of ideal gas is kept in a cubical vessel of length a cm at 330 K. The gas is then transferred completely to a large cubical vessel of length 2a cm at 330 K. The change in entropy in cal/° for the ideal gas assuming reversible process.
(a) 2.07
(b) 4.15
(c) 6.21
(d) 1.03

Solution. Answer: (b) 4.15
Initial volume = a3 cm3; final volume = 8a3 cm3. ΔS = 2.303R log(V2/V1) = 2.303 × 2 × log 8 = 4.15 cal/° (4.16 by exact arithmetic; option (b) is the nearest).

Teacher's Note: Volume ratio is 2³ = 8; isothermal ΔS = R ln(V₂/V₁).

Exam Note: Cube the length ratio to get the volume ratio.

Question OB-31. The standard enthalpy of combustion of propane gas at 27°C is −2220 kJ mol−1 and standard enthalpy of vaporisation of C3H8 is 15 kJ mol−1 at 27°C. What is the standard internal energy change for combustion of liquid propane. Water is formed during combustion.
(a) −2205 kJ
(b) −2200 kJ
(c) −1100 kJ
(d) −6600 kJ

Solution. Answer: (b) −2200 kJ
C3H8(l) → C3H8(g); ΔH1 = +15 kJ. C3H8(g) + 5O2 → 3CO2(g) + 4H2O(l); ΔH2 = −2220 kJ. C3H8(l) + 5O2 → 3CO2(g) + 4H2O(l); ΔH3 = 15 − 2220 = −2205 kJ. ΔH = ΔU + ΔnRT with Δn = 3 − 5 = −2: −2205 = ΔU + (−2) × 8.314 × 300 × 10−3, so ΔU = −2200 kJ.

Teacher's Note: Add vaporisation to gas-phase combustion first, then convert ΔH to ΔU using Δn = −2.

Exam Note: Liquid reactant changes Δn: only 5 O₂ and 3 CO₂ gaseous.

Question OB-32. ΔG° for the reaction: Br2(g) ⇌ 2Br(g) at 2400 K is −72.8 kJ mol−1. If ΔH° being independent of temperature and equal to 205 kJ mol−1, what will be the value of K at 2600 K:
(a) 38.39
(b) 84.46
(c) 19.19
(d) 42.32

Solution. Answer: (b) 84.46
−ΔG° = 2.303RT log K: 72800 = 2.303 × 8.314 × 2400 × log K, so K = 38.39 at 2400 K. Also 2.303 log(K2/K1) = (ΔH/R)[(T2 − T1)/(T1T2)] = (205000/8.314) × [(2600 − 2400)/(2600 × 2400)], so K2/K1 = 2.20 and K2 = 84.46 (exact arithmetic gives about 84.6; option (b) is the nearest).

Teacher's Note: Get K at 2400 K from ΔG°, then apply the van't Hoff equation to 2600 K.

Exam Note: Use the van't Hoff relation with temperatures in Kelvin.

Previous Years Problems

Question PY-1. ΔfH° for CO2(g), CO(g) and H2O(g) are −393.5, −110.5 and −241.8 kJ mol−1 respectively. The standard enthalpy change (in kJ) for given reaction is: CO2(g) + H2(g) → CO(g) + H2O(g) (IIT 2000)
(a) +524.1
(b) +41.2
(c) −262.5
(d) −41.2

Solution. Answer: (b) +41.2
C + O2 → CO2; −393.5 ...(1); C + (1/2)O2 → CO; −110.5 ...(2); H2 + (1/2)O2 → H2O; −241.8 ...(3). By Eqs. (2) + (3) − (1): CO2 + H2 → CO + H2O; ΔH° = −110.5 − 241.8 + 393.5 = +41.2 kJ.

Teacher's Note: Products' formation enthalpies minus reactant CO₂'s; H₂ contributes zero.

Exam Note: Products minus reactants: (−110.5 − 241.8) + 393.5.

Question PY-2. Which of the reaction defines ΔfH°: (IIT 2003)
(a) C(Diamond) + O2(g) → CO2(g)
(b) (1/2)H2(g) + (1/2)F2(g) → HF(g)
(c) N2(g) + 3H2(g) → 2NH3(g)
(d) CO(g) + (1/2)O2(g) → CO2(g)

Solution. Answer: (b)
No doubt (a) and (b) both represent heats of formation, but the standard heat of formation ΔfH° for CO2 is formed from carbon graphite: C(graphite) + O2 → CO2, as graphite is the most stable form of carbon. Reaction (c) forms 2 mol and (d) starts from a compound.

Teacher's Note: Formation reaction: one mole of product from elements in their most stable states.

Exam Note: Diamond is not the reference form; (c) forms 2 mol.

Question PY-3. For which reaction ΔH°r is equal to ΔH°f: (IIT 2002)
(a) CH4(g) + 2Cl2(g) → CH2Cl2(l) + 2HCl(g)
(b) Xe(g) + 2F2(g) → XeF4(g)
(c) 2CO + O2(g) → 2CO2(g)
(d) N2(g) + O3(g) → N2O3(g)

Solution. Answer: (b)
It is based on the definition of heat of formation: one mole of XeF4 formed from elements in their standard states.

Teacher's Note: Only (b) starts entirely from elements and gives exactly one mole of a single compound.

Exam Note: Reactants must be elements; O₃ is not a standard-state element.

Question PY-4. ΔHvap = 30 kJ/mol and ΔSvap = 75 J mol−1 K−1. Find temperature of vapour at one atmosphere. (IIT 2004)
(a) 400 K
(b) 350 K
(c) 298 K
(d) 250 K

Solution. Answer: (a) 400 K
At the boiling point ΔH = TΔS, so T = ΔH/ΔS = 30 × 103/75 = 400 K.

Teacher's Note: At equilibrium between liquid and vapour, ΔG = 0 so T = ΔH/ΔS.

Exam Note: Convert 30 kJ to 30000 J before dividing.

Question PY-5. The bond energy (in kcal mol−1) of a C—C single bond is approximately: (IIT 2010)
(a) 1
(b) 10
(c) 100
(d) 1000

Solution. Answer: (c) 100
eC−C ranges between 85 to 150 kcal mol−1.

Teacher's Note: Typical single-bond energies lie near 80 to 100 kcal/mol; bonds are not weak (1, 10) or huge (1000).

Exam Note: Remember about 83 to 100 kcal for C–C.

Question PY-6. The species which by definition has zero standard molar enthalpy of formation at 298 K: (IIT 2010)
(a) Br2(g)
(b) Cl2(g)
(c) H2O(g)
(d) CH4(g)

Solution. Answer: (b) Cl2(g)
Standard molar enthalpy of elements in their most stable state is zero: H°Br2(l) = 0; H°Cl2(g) = 0; H°I2(s) = 0. Br2 is liquid at 298 K, so Br2(g) is not zero.

Teacher's Note: Zero is for the element in its standard state at 298 K: Cl₂ gas, Br₂ liquid.

Exam Note: Check the physical state at 298 K.

Question PY-7. Using the data provided, calculate the multiple bond energy (kJ mol−1) of a C≡C bond in C2H2. Given the heat of formation of C2H2 = 225 kJ mol−1. (take the bond energy of a C—H bond as 350 kJ mol−1): 2C(s) → 2C(g); ΔH = 1410 kJ mol−1; H2(g) → 2H(g); ΔH = 330 kJ mol−1 (IIT 2012)
(a) 1165
(b) 837
(c) 865
(d) 815

Solution. Answer: (d) 815
(i) 2C(s) + H2(g) → H—C≡C—H(g); ΔH = 225 kJ mol−1. From (i): 225 = [2 × ΔHC(s)→C(g) + 1 × eH−H] − [2 × eC−H + 1 × eC≡C] = [1410 + 330] − [700 + eC≡C], so eC≡C = 1040 − 225 = 815 kJ mol−1.

Teacher's Note: Atomise reactants, subtract energy released forming two C–H and the triple bond.

Exam Note: Set up formation cycle: atomisation minus bonds formed.

Question PY-8. The standard enthalpy of formation of CO2(g), H2O(l) and glucose(s) at 25°C are −400 kJ/mol, −300 kJ/mol and −1300 kJ/mol, respectively. The standard enthalpy of combustion per gram of glucose at 25°C is: [JEE (Advanced-I) 2013]
(a) +2900 kJ
(b) −2900 kJ
(c) −16.11 kJ
(d) +16.11 kJ

Solution. Answer: (c) −16.11 kJ
C6H12O6(s) + 6O2(g) → 6CO2(g) + 6H2O(l); ΔcombH° = 6ΔfH°(CO2) + 6ΔfH°(H2O) − ΔfH°(glucose) = 6 × (−400) + 6 × (−300) − (−1300) = −2900 kJ/mol. Per gram = −2900/180 = −16.11 kJ.

Teacher's Note: Combustion from formation data gives −2900 kJ/mol; divide by 180 for per gram.

Exam Note: Molar mass of glucose is 180 g/mol.

Question PY-9. For complete combustion of ethanol, C2H5OH(l) + 3O2(g) → 2CO2(g) + 3H2O(l), the amount of heat produced, as measured in bomb calorimeter, is 1364.47 kJ mol−1 at 25°C. Assuming ideality of combustion, the enthalpy, ΔcH, for the reaction will be: (R = 8.314 kJ mol−1) [JEE (Main) 2014]
(a) −1366.95 kJ mol−1
(b) −1361.95 kJ mol−1
(c) −1460.50 kJ mol−1
(d) −1350.50 kJ mol−1

Solution. Answer: (a) −1366.95 kJ mol−1
ΔcH = ΔcU + Δn(g)RT, with ΔcU = −1364.47 kJ mol−1 and Δn(g) = 2 − 3 = −1. ΔcH = −1364.47 × 103 + (−1) × 8.314 × 298 = −1364470 − 2477.57 = −1366.95 × 103 J = −1366.95 kJ. The value of R given in the question is wrong; it is 8.314 J mol−1.

Teacher's Note: Bomb calorimeter gives ΔU; with Δn = −1 gaseous mole, ΔH is slightly more negative.

Exam Note: R is 8.314 J mol⁻¹ K⁻¹, not kJ, in the question.

Question PY-10. The heats of combustion of carbon and carbon monoxide are −393.5 and −283.5 kJ mol−1, respectively. The heat of formation (in kJ) of carbon monoxide per mole is: [JEE (Main) 2016]
(a) 676.5
(b) −676.5
(c) −110.5
(d) 110.5

Solution. Answer: (c) −110.5
C(g) + O2(g) → CO2(g); ΔH = −393.5 kJ/mol ...(1). CO(g) + (1/2)O2(g) → CO2(g); ΔH = −283.5 kJ/mol ...(2). By eq. (1) − eq. (2): C + (1/2)O2 → CO; ΔH = −393.5 + 283.5 kJ/mol = −110 kJ/mol. Note: however choice (c) shows −110.5 kJ/mol (nearest option).

Teacher's Note: Subtract CO's combustion from carbon's combustion to get formation of CO.

Exam Note: Exact arithmetic gives −110.0; −110.5 is the nearest option.

Question PY-11. Given: C(graphite) + O2(g) → CO2(g); ΔrH° = −393.5 kJ mol−1. H2(g) + (1/2)O2(g) → H2O(l); ΔrH° = −285.8 kJ mol−1. CO2(g) + 2H2O(l) → CH4(g) + 2O2(g); ΔrH° = +890.3 kJ mol−1. Based on the above thermochemical equations, the value of ΔrH° at 298 K for the reaction: C(graphite) + 2H2(g) → CH4(g) will be: [JEE (Main) 2017]
(a) + 74.8 kJ mol−1
(b) + 144.0 kJ mol−1
(c) −74.8 kJ mol−1
(d) −144.0 kJ mol−1

Solution. Answer: (c) −74.8 kJ mol−1
By (i) + 2 × (ii) + (iii): C(graphite) + 2H2(g) → CH4(g); ΔrH° = −393.5 − 285.8 × 2 + 890.3 = −74.8 kJ mol−1.

Teacher's Note: Add the equations so CO₂ and H₂O cancel; double the hydrogen step.

Exam Note: Multiply equation (ii) by 2 before adding.

Objective Problems (More Than One Answer Correct)

Question MC-1. Which of the following mixtures on neutralisation will show a same rise in temperature?
(a) 60 mL of 0.1 M HCl + 60 mL of 0.1 M NaOH
(b) 30 mL of 0.1 M HCl + 30 mL of 0.1 M NaOH
(c) 40 mL of 0.1 M HCl + 30 mL of 0.1 M NaOH
(d) 60 mL of 0.1 M HCl + 100 mL of 0.1 M NaOH

Solution. Answer: (a), (b)
(a) Generates (60 × 0.1 × 13.7)/1000 kcal heat which is used by 120 mL solution. (b) Generates (30 × 0.1 × 13.7)/1000 kcal heat which is used by 60 mL solution. Heat per mL is the same, so the temperature rise is the same. In (c) 3 Meq. heat 70 mL and in (d) 6 Meq. heat 160 mL, which differ.

Teacher's Note: Temperature rise depends on heat per unit volume of solution.

Exam Note: Compare milli-equivalents neutralised per mL of mixture.

Question MC-2. If ΔfH°(C2H6)g = −85 kJ mol−1, ΔfH°(C3H8)g = −104 kJ mol−1, ΔH° for C(s) → C(g) is 718 kJ mol−1 and heat of formation of H-atom is 218 kJ mol−1, then:
(a) eC−C = 345 kJ
(b) eC−H = 414 kJ
(c) eH−H = 436 kJ
(d) eH−H = 218 kJ

Solution. Answer: (a), (b), (c)
(1/2)H2 → H; ΔfH° = 218 kJ, so eH−H = 436 kJ. Let eC−C = a and eC−H = b. 2C + 3H2 → C2H6: −85 = −[a + 6b] + [2 × 718 + 3 × 436], so a + 6b = 2829. 3C + 4H2 → C3H8: −104 = −[2a + 8b] + [3 × 718 + 4 × 436], so 2a + 8b = 4002. Hence a = 345 kJ, b = 414 kJ.

Teacher's Note: Two alkanes give two equations for C–C and C–H, after eH–H = 2 × 218.

Exam Note: Solve a + 6b = 2829 and 2a + 8b = 4002.

Question MC-3. For which reaction ΔH < ΔU:
(a) COCl2(g) ⇌ CO(g) + Cl2(g)
(b) NH4Cl(s) ⇌ NH3(v) + HCl(v)
(c) PCl3(g) + Cl2(g) ⇌ PCl5(g)
(d) N2(g) + 3H2(g) ⇌ 2NH3(g)

Solution. Answer: (c), (d)
ΔH = ΔU + ΔnRT; if Δn is negative, then ΔH < ΔU. Δn = −1 in (c) and −2 in (d); it is +1 in (a) and +2 in (b).

Teacher's Note: ΔH is below ΔU when gaseous moles decrease.

Exam Note: Compute Δn for each: only (c) and (d) are negative.

Question MC-4. Melting of ice at −1°C shows:
(a) ΔS = +ve
(b) ΔH = +ve
(c) ΔG = +ve
(d) process is spontaneous

Solution. Answer: (a), (b), (c)
ΔH and ΔS both increase on melting of ice. At −1°C (below the normal melting point) the melting is non-spontaneous, so ΔG = +ve.

Teacher's Note: Melting absorbs heat and raises entropy; below 0°C it is not spontaneous.

Exam Note: Below the melting point ΔG for melting is positive.

Question MC-5. Select the correct statements:
(a) All combustion reactions are exothermic
(b) Heat of combustion are always exothermic
(c) N2 + O2 → 2NO; ΔH = +ve
(d) F2 + (1/2)O2 → F2O; ΔH = +ve

Solution. Answer: (b), (c), (d)
Only three combustions are endothermic: the formation of N2O and NO from nitrogen, and F2O from fluorine (N2 + (1/2)O2 → N2O; ΔH = +ve). These are not heats of combustion of the fuel. Heat of combustion is always exothermic.

Teacher's Note: Oxidation of N₂ is endothermic, but it is not a 'heat of combustion' in the defined sense.

Exam Note: Distinguish the heat of combustion from endothermic oxidations.

Question MC-6. Which of the following are incorrect? (Standard state of each element in most stable form; Δ1: aA + bB → elements, Δ3: elements → cC + dD, Δ2: aA + bB → cC + dD.)
(a) ΔH1° = −aHA° − bHB°
(b) ΔH2° = cHC° + dHD°
(c) ΔH3° = cHC° + dHD° − aHA° − bHB°
(d) ΔH3° = ΔH2° − ΔH1°

Solution. Answer: (b), (c)
Following the diagram, ΔH1° = −(ΣH°)reactants (decomposition of reactants into elements), ΔH3° = ΣH°products, and ΔH2° = ΔH1° + ΔH3° = ΣH°products − ΣH°reactants. So (a) and (d) are correct; (b) and (c) are incorrect.

Teacher's Note: Reaction enthalpy is the path through the elements: products formation minus reactants formation.

Exam Note: Statements (b) and (c) swap ΔH₂ and ΔH₃.

Question MC-7. Which of the following reactions are exothermic?
(a) Rusting of iron
(b) Burning of wax
(c) Synthesis of NH3
(d) Condensation of steam

Solution. Answer: (a), (b), (c), (d)
All are exothermic.

Teacher's Note: Oxidation, combustion, NH₃ synthesis and condensation all release heat.

Exam Note: Each releases heat to surroundings.

Question MC-8. Select the correct statements:
(a) A good fuel has higher calorific value
(b) Endothermic reactions always becomes faster as we approach absolute zero
(c) Enthalpy of vaporisation increases from F2 to I2
(d) Bond enthalpy of X—X bond has the order: F—F > Cl—Cl > Br—Br > I—I

Solution. Answer: (a), (c)
eCl−Cl > eF−F, so (d) is wrong (F–F is anomalously weak). Endothermic reactions slow down at low temperature, so (b) is wrong.

Teacher's Note: F–F is weak due to lone-pair repulsion; the true order starts with Cl–Cl.

Exam Note: Cl–Cl is stronger than F–F.

Question MC-9. Select the correct statements:
(a) Bond energy of eH−H = 2 × ΔfH of H-atom
(b) The ratio of heat of vaporisation and the normal boiling point of a liquid is ≃ 88 J mol−1
(c) Heat of neutralisation for HF is −16.4 kcal eq.−1
(d) Hess's law can be proved experimentally

Solution. Answer: (a), (b), (c)
(1/2)H2 → H; ΔfH, so eH−H = 2 × ΔfH. HF has higher ΔH neutralisation due to extensive hydration of F− ions. Hess's law has been proved theoretically, not experimentally. Trouton's rule: ΔHv/Tb ≃ 88 J mol−1 K−1.

Teacher's Note: Hess's law follows from enthalpy being a state function; it is not tested directly.

Exam Note: Trouton constant is about 88 J mol⁻¹ K⁻¹.

Question MC-10. Which of the following are endothermic reactions?
(a) Combustion of CH4
(b) Decomposition of H2O
(c) Dehydrogenation of ethane
(d) Conversion of graphite to diamond

Solution. Answer: (b), (c), (d)
Heat of combustion is always −ve (exothermic), so (a) is excluded; (b), (c) and (d) absorb heat.

Teacher's Note: Bond-breaking processes like decomposition and dehydrogenation absorb heat.

Exam Note: Combustion is the only exothermic option.

Comprehension Based Problems - Comprehension 1

Question C1-1. Comprehension 1: Chemical reactions are usually exothermic or endothermic. A balanced thermochemical equation involving physical state of reactants and products expresses the chemical changes as well as heat of reaction. Heat changes are usually expressed in terms of ΔH (at constant P) or ΔU (at constant V). The heats of reactions vary with physical state of reactants and products, conditions of constant pressure or volume and temperature. Heats of neutralisation, heat of condensation are always exothermic. Standard heat enthalpy of a compound is its heat of formation at 1 atm P and 25°C.
[1] The heat energy released during neutralisation of 1 eq. of HF with 1 eq. of NaOH and with 1 eq. of CH3COOH are respectively:
(a) −16.4 kcal, −12.0 kcal
(b) −12.0 kcal, −10 kcal
(c) −13.7 kcal in both
(d) −12.0 kcal, −16.4 kcal

Solution. Answer: (a)
Heat released during neutralisation of a weak acid is less than 13.7 kcal. In HF, hydration of F− ion is responsible for the higher value (−16.4 kcal), while CH3COOH gives −12.0 kcal.

Teacher's Note: Weak acids usually give less than 13.7 kcal; HF is the exception due to hydration.

Exam Note: HF gives about 16.4 kcal; acetic acid about 12.

Question C1-2. [2] Heat of dissociation of H2O in H+ and OH− ions is:
(a) −57.27 kJ/mol
(b) +57.27 kJ/mol
(c) −50 kJ/mol
(d) +50 kJ/mol

Solution. Answer: (b)
H+ + OH− → H2O; ΔH = −13.7 × 4.18 kJ = −57.27 kJ. The dissociation of water is the reverse, so ΔH = +57.27 kJ/mol.

Teacher's Note: Dissociation of water is the reverse of neutralisation, so the sign flips.

Exam Note: Convert 13.7 kcal to 57.27 kJ, then reverse.

Question C1-3. [3] In which case of mixing a strong acid and a base each of 1 N concentration, temperature rise is highest:
(a) 20 mL acid + 30 mL alkali
(b) 10 mL acid + 40 mL alkali
(c) 25 mL acid + 25 mL alkali
(d) 30 mL acid + 20 mL alkali

Solution. Answer: (c)
25 Meq. of acid and 25 Meq. of alkali react to give 13.7 × 25/1000 kcal heat, the maximum, because equal equivalents give complete neutralisation of the largest amount.

Teacher's Note: Heat is highest when acid and base are equal in equivalents and total heat is largest.

Exam Note: Equal equivalents: 25 mL + 25 mL.

Question C1-4. [4] Heat of combustion of CH4, C2H4, C2H2 and C2H6 are −890, −1411, −1300 and −1560 kJ mol−1. The best fuel is:
(a) CH4
(b) C2H4
(c) C2H6
(d) C2H2

Solution. Answer: (a)
Best fuel is CH4 as its calorific value = 890/16 = 55.63 kJ/g (C2H4: 1411/28 = 50.4; C2H2: 1300/26 = 50; C2H6: 1560/30 = 52).

Teacher's Note: Compare heat per gram, which is calorific value, not per mole.

Exam Note: Divide by molar masses 16, 28, 26, 30.

Question C1-5. [5] The enthalpy of which form of carbon has been supposed to be zero at 25°C and 1 atm:
(a) Graphite
(b) Diamond
(c) Coke
(d) Charcoal

Solution. Answer: (a)
Graphite is the most stable form of carbon.

Teacher's Note: The reference state of carbon is graphite, the most stable allotrope.

Exam Note: Reference state means the most stable form.

Question C1-6. [6] Molar heat capacity of diamond carbon in equilibrium with graphite at constant pressure is:
(a) zero
(b) infinity
(c) 3.4 kJ/mol
(d) −3.4 kJ/mol

Solution. Answer: (b)
Cp = (∂H/∂T)p. At equilibrium during phase transition ΔT = 0, so the heat capacity is infinite.

Teacher's Note: At the transition temperature heat is absorbed without any temperature change.

Exam Note: Zero ΔT at equilibrium means infinite Cp.

Comprehension Based Problems - Comprehension 2

Question C2-1. Comprehension 2: When 100 mL of 1.0 M HCl was mixed with 100 mL of 1.0 M NaOH in an insulated beaker at constant pressure, a temperature increase of 5.7°C was measured for the beaker and its contents (Expt-1). Because the enthalpy of neutralisation of a strong acid with a strong base is a constant (−57.0 kJ mol−1), this experiment could be used to measure the calorimeter constant. In a second experiment (Expt-2), 100 mL of 2.0 M acetic acid (Ka = 2.0 × 10−5) was mixed with 100 mL of 1.0 M NaOH (under identical conditions to Expt-1) where a temperature rise of 5.6°C was measured. (Consider heat capacity of all solutions as 4.2 J g−1 K−1 and density of all solutions as 1.0 g mL−1) [JEE (Advanced II) 2015]
[1] Enthalpy of dissociation (in kJ mol−1) of acetic acid obtained from the Expt-2 is:
(a) 1.0
(b) 10.0
(c) 24.5
(d) 51.4

Solution. Answer: (a) 1.0
Expt-1: 100 m.mol HCl + 100 m.mol NaOH release heat [200 × 4.2 + C] × 5.7 J = 57 × 1000 × 100/1000 J = 5700 J, where C is the calorimeter constant; this gives 840 + C = 1000, C = 160 J/K. Expt-2: 100 m.mol CH3COOH neutralised by 100 m.mol NaOH releases [200 × 4.2 + C] × 5.6 J = 5600 J, so |ΔHneutralisation| = 56 kJ/mol. ΔHneutralisation = −56 = −57 + ΔHionisation, so ΔHionisation = +1 kJ/mol.

Teacher's Note: Calibrate with strong acid-base; the shortfall for acetic acid is its ionisation enthalpy.

Exam Note: Difference of 57 and 56 kJ/mol gives 1 kJ/mol.

Question C2-2. [2] The pH of the solution after Expt-2 is:
(a) 2.8
(b) 4.7
(c) 5.0
(d) 7.0

Solution. Answer: (b) 4.7
The solution is a buffer containing 100 m.mol of CH3COOH and 100 m.mol of CH3COONa. pH = pKa + log([CH3COONa]/[CH3COOH]) = −log(2 × 10−5) + log[(100/1000)/(100/1000)] = 5 − log 2 = 4.7.

Teacher's Note: Equal salt and acid amounts make a buffer with pH equal to pKa.

Exam Note: pH = pKa when [salt] = [acid]; pKa = 4.7.

Statement Explanation Problems

Question SE-1. S: Heat of neutralisation for HF is −68.552 kJ/eq. whereas for HCl it is −57.26 kJ/eq.
E: The acid HF is weak acid.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (d)
No doubt the value for HF is higher due to extensive hydration of F− ion (the smallest anion, only H− is smaller than F−). Both statements are true, but weakness of HF does not explain the higher heat.

Teacher's Note: Weak acids usually give less heat; HF's higher value comes from hydration of F⁻.

Exam Note: Both true, but the explanation is not the reason.

Question SE-2. S: In a diatomic molecule involving two like atoms covalently bonded to each other, bond energy = 2 × heat of formation of atom.
E: H2 → 2H; eH−H = ΔH.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (c)
Heat of formation of H atom = ΔH = eH−H/2, so eH−H = 2ΔfH, which is the reasoning given in E.

Teacher's Note: Half a mole of H₂ forms one mole of H atoms, so bond energy is twice the atom's formation heat.

Exam Note: E restates the relation exactly; both correct.

Question SE-3. S: Bond energy for breaking up a bond is endothermic.
E: Heat is required to overpower the attractions between two atoms.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (c)
The explanation is the correct reason for the statement.

Teacher's Note: Breaking a bond needs energy to overcome attraction; hence endothermic.

Exam Note: Energy absorbed to break bonds explains the sign.

Question SE-4. S: C + (1/2)O2 → CO; ΔH = −26.0 kcal; CO + (1/2)O2 → CO2; ΔH = −68.3 kcal; therefore C + O2 → CO2; ΔH = −94.3 kcal.
E: This is an experimental proof of Hess's law.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (a)
The statement is correct (−26.0 − 68.3 = −94.3). It is an application of Hess's law and not an experimental proof; Hess's law has been verified theoretically.

Teacher's Note: The sum is an application of the law, not a proof of it.

Exam Note: Adding steps applies Hess's law; it does not prove it.

Question SE-5. S: Heat of combustion are always exothermic.
E: Combustion of N2 to give NO is exothermic.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (a)
(1/2)N2 + (1/2)O2 → NO; ΔH = +ve. It is due to high bond energy of N2. Note this equation does not represent heat of combustion of N2 (partial combustion). So S is correct and E is wrong.

Teacher's Note: N₂ oxidation to NO absorbs heat, so the explanation is false.

Exam Note: The N₂ to NO reaction is endothermic.

Question SE-6. S: Combustion of N2 to give NO is endothermic.
E: Bond energy of N2 is very high.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (c)
The explanation is the correct reason for the statement: the very strong N≡N bond makes the reaction absorb heat.

Teacher's Note: The strong N≡N bond (946 kJ/mol) outweighs energy released forming N–O bonds.

Exam Note: High N₂ bond energy explains the positive ΔH.

Question SE-7. S: The ratio of heat of vaporisation and the normal boiling point of a liquid is approximately 88 J/mol.
E: This is Trouton's rule derived from exp. data.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (c)
This is Trouton's rule, derived from experimental data: ΔHv/Tb ≈ 88 J mol−1 K−1. The explanation is the correct reason for the statement.

Teacher's Note: Trouton's rule is the empirical relation behind the 88 J mol⁻¹ K⁻¹ value.

Exam Note: The unit is J mol⁻¹ K⁻¹ properly.

Question SE-8. S: Standard heat enthalpy of a compound is its heat of formation at 25°C and 1 atm.
E: Standard heat enthalpy of pure elements have arbitrarily assumed to be zero.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (c)
The explanation is the correct reason for the statement: with element enthalpies set to zero, a compound's enthalpy equals its heat of formation.

Teacher's Note: Setting element enthalpies to zero makes compound enthalpy equal formation heat.

Exam Note: Zero for elements is the convention that makes it work.

Question SE-9. S: The variation of heat of reaction with temperature are given in terms of Kirchhoff's equation.
E: The Kirchhoff's equation is: ΔH = ΔU + ΔnRT.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (a)
Kirchhoff's equation is ΔH2 − ΔH1 = ΔCP(T2 − T1). The statement is correct; the given explanation is wrong.

Teacher's Note: ΔH = ΔU + ΔnRT relates ΔH and ΔU, not temperature variation.

Exam Note: Kirchhoff: ΔH₂ − ΔH₁ = ΔCpΔT.

Question SE-10. S: Heat of neutralization can be given as H+ + OH− → H2O; ΔH = −13.6 kcal.
E: Heat of neutralization can be alternatively defined as heat of formation of water.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (a)
Heat of formation of water is for H2 + (1/2)O2 → H2O (ΔfH), which is a different process. So S is correct and E is wrong.

Teacher's Note: Neutralisation heat is H⁺ + OH⁻ → H₂O; formation heat starts from H₂ and O₂.

Exam Note: They are different reactions; E is wrong.

Question SE-11. S: The dissolution of NaCl in water is endothermic, though it is spontaneous process.
E: ΔG for the process is −ve because ΔHsol is very low and thus TΔS > ΔH.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (c)
The explanation is the correct reason for the statement: the entropy term outweighs the small positive ΔH.

Teacher's Note: Spontaneity needs ΔG < 0; entropy gain (TΔS) beats the small ΔH.

Exam Note: Cite ΔG = ΔH − TΔS with TΔS larger.

Question SE-12. S: Heat of combustion of C2H6 is −341.1 kcal mol−1 and heat of combustion of C2H2 is −310 kcal mol−1 but C2H2 is better fuel.
E: The better fuel has high calorific value.
(a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) both S and E are correct and E is correct explanation of S; (d) both S and E are correct but E is not correct explanation of S.

Solution. Answer: (c)
Calorific value is defined as the heat given out by burning 1 g fuel. Calorific value for C2H6 = −341.1/30 = −11.37 kcal/g; for C2H2 = −310/26 = −11.92 kcal/g.

Teacher's Note: Compare per gram: ethyne releases slightly more heat per gram.

Exam Note: Better fuel means higher calorific value.

Matching Type Problems

Question MT-1. Match List A with List B: A. HCl + NH4OH → NH4Cl + H2O; B. H+ + OH− → H2O; C. HF + NaOH → NaF + H2O. List B: (a) ΔH = −13.7 kcal; (b) ΔH > −13.7 kcal; (c) ΔH < −13.7 kcal.

Solution. Answer (from key): The book key prints A–c; B–a; C–b.
Corrected: A–b; B–a; C–c. HCl + NH4OH (weak base) gives about −12.27 kcal, which is greater than −13.7 (less negative), so (b). H+ + OH− gives −13.7 kcal, so (a). HF + NaOH gives about −16.4 kcal, which is less than −13.7 (more negative), so (c).

Teacher's Note: Compare signed values: weak base is less negative, HF is more negative than −13.7.

Exam Note: Read the inequality signs on signed ΔH values.

Question MT-2. Match List A with List B: A. 2PW + 5O2 → P2O5; B. 2PG + 5O2 → P2O5; C. CA + O2(g) → CO2(g); D. CG + O2(g) → CO2(g). List B: (a) ΔfH of P2O5; (b) ΔfH° of P2O5; (c) ΔfH° of CO2; (d) ΔfH of CO2.

Solution. Answer (from key): A–b; B–a; C–d; D–c.
Reactions starting from the standard-state allotropes (white P, graphite) give the standard enthalpy of formation (ΔfH°); those starting from other allotropes (PG, amorphous carbon) give only ΔfH.

Teacher's Note: Standard formation needs the reference allotrope: white phosphorus and graphite.

Exam Note: Standard symbol ° only for reference-state reactants.

Question MT-3. Match List A with List B: A. O2(g) → O2(l); B. Br2(l) → Br2(g); C. I2(s) → I2(l); D. H2O(s) → H2O(v). List B: (a) ΔrH° = ΔcondH°; (b) ΔrH° = ΔvH°; (c) ΔrH° = ΔsH°; (d) ΔrH = ΔsH.

Solution. Answer (from key): A–a; B–b; C–c; D–d.
(O2 gas to liquid is condensation; Br2 liquid to gas is vaporisation. Note for human check: I2(s) → I2(l) is a fusion step, whereas H2O(s) → H2O(v) is sublimation; the book pairs C with (c) and D with (d) as printed, and the subscripts in the list are not fully legible.)

Teacher's Note: Name each phase change: condensation, vaporisation, fusion, sublimation.

Exam Note: Match the process to its subscript label.

Question MT-4. Match List A with List B: A. H2 → 2H; B. CH4 → C + 4H; C. C2H2 + 2H2 → C2H6; D. C2H4 + H2 → C2H6. List B: (a) ΔH = ΔfH of H × 2; (b) ΔH = average bond energy × 4; (c) ΔH = −eC≡C − 4eC−H + 2eH−H + eC−C; (d) ΔH = −eC=C − eH−H + eC−H + eC−C.

Solution. Answer (from key): A–a; B–b; C–c; D–d.
H2 → 2H has ΔH = 2 × ΔfH(H); CH4 → C + 4H absorbs four times the average C–H bond energy; C and D match the bond-change expressions for hydrogenation of C≡C and C=C as printed in List B (the book writes these with its own sign convention for bond energies; flagged for human check).

Teacher's Note: Match each reaction with its bond-breaking and bond-forming expression.

Exam Note: Hydrogenation: break the multiple bond and H–H, form C–H and C–C.

Question MT-5. Type II (more than one match is possible): List A: (A) C6H12O6 + (aq) ⇌ C6H12O6(aq); (B) CaO + (aq) ⇌ Ca(OH)2(aq); (C) C + O2 → CO2 at 298 K; (D) Cgraphite + O2 → CO2, ΔH298 K at 298 K. List B: (i) Exothermic; (ii) Endothermic; (iii) ΔH is heat of reaction; (iv) ΔH is heat of formation of CO2; (v) ΔH is standard heat of formation of CO2; (vi) ΔH is standard heat enthalpy of CO2.

Solution. Answer (from key): A–ii, iii; B–i, iii; C–i, iii, iv; D–i, iii, v, vi.
Dissolution of glucose is endothermic; CaO + water is exothermic; both are heats of reaction. Carbon burning in oxygen is exothermic and gives the heat of formation of CO2; with graphite specified at 298 K it is the standard heat of formation and standard heat enthalpy of CO2.

Teacher's Note: Each reaction can fit several descriptions at once: type of heat, sign, and standard status.

Exam Note: Graphite makes the heat 'standard'; plain C does not.

Question MT-6. Match List A with List B (more than one match possible): (A) ΔfH°(O2, g); (B) ΔfH°(SR); (C) ΔfH°(SM); (D) ΔfH°(Pwhite); (E) ΔfH°(Pblack). List B: (i) Zero; (ii) Not equal to zero; (iii) Most stable form; (iv) Less stable form.

Solution. Answer (from key): A–i, iii; B–i, iii; C–ii, iv; D–i, iv; E–ii, iii.
O2(g) and rhombic sulphur are reference (zero) and most stable; monoclinic sulphur is less stable with non-zero value; white phosphorus is the reference (zero) though less stable, while black phosphorus is the most stable form with a non-zero value.

Teacher's Note: Reference state may not be the most stable form: white phosphorus is the exception.

Exam Note: White P: zero but less stable; black P: stable, non-zero.

Question MT-7. Match List A with List B: (A) CO2(s) → CO2(g); (B) CaCO3(s) → CaO(s) + CO2(g); (C) 2H → H2(g); (D) P(white, solid) → P(red, solid). List B: (p) Phase transition; (q) Allotropic change; (r) ΔH = +ve; (s) ΔS = +ve; (t) ΔS = −ve. (IIT 2011)

Solution. Answer (from key): The book key prints A–p, r, s; B–r, s; C–t; D–p, q, r.
Corrected: D–p, q, t. White to red phosphorus is a transition between allotropes (phase transition and allotropic change); red phosphorus is the more stable form so the change is exothermic (ΔH negative, not r), and the more ordered polymeric red form has lower entropy (ΔS = −ve, t). A: sublimation absorbs heat and increases entropy (p, r, s). B: decomposition (r, s). C: atoms joining lower the entropy (t).

Teacher's Note: White P to red P is exothermic and ordering, so (r) fails and (t) applies.

Exam Note: Exothermic and entropy-decreasing: choose p, q, t.

Question MT-8. Match List A with List B: (A) CO(g) + (1/2)O2(g) → CO2(g); (B) Cgraphite + O2(g) → CO2(g); (C) H2(g) + (1/2)O2(g) → H2O(l); (D) 2H2(g) + O2(g) → 2H2O(g). List B: (p) Standard enthalpy of CO2(g); (q) Enthalpy of reaction; (r) Enthalpy of combustion of CO(g); (s) Standard enthalpy of H2O(l).

Solution. Answer (from key): A–q, r; B–p, q; C–q, s; D–q.
A is the combustion of CO. B forms CO2 from graphite (standard enthalpy of CO2). C forms liquid water from elements (standard enthalpy of H2O(l)). D produces 2 mol of water vapour, so it is only an enthalpy of reaction.

Teacher's Note: Formation from elements gives standard enthalpy; two moles of vapour is just a reaction enthalpy.

Exam Note: Check mole count and physical state for each match.

P Bahadur Solutions for JEE Mathematics: P Bahadur Solutions Numerical Chemistry Chapter 16 Thermochemistry

Complete Math Solutions for P Bahadur Solutions Numerical Chemistry Chapter 16 Thermochemistry

Explore reliable mathematical solutions for P Bahadur Solutions Numerical Chemistry Chapter 16 Thermochemistry tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your JEE Exam Preparation

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these P Bahadur Solutions for JEE Chemistry?

They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the P Bahadur JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these P Bahadur solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising P Bahadur JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.