Step-by-Step OP Tandon Solutions for JEE Chemistry Chapter 15 Stoichiometry
Review structured textbook solutions for JEE Chemistry Chapter 15 Stoichiometry prepared by OP Tandon. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Download Chapter 15 Stoichiometry Textbook Solutions PDF
View or download the dedicated Chapter 15 Stoichiometry solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
Stoichiometry (IIT Entrance Test Papers) - Part 2: pages 971-994
IIT Entrance Test Paper, Module 1 (continued)
Question M1.47. A piece of wood taken from a cave dwelling in New Mexico is found to have a carbon-14 activity (per gram of carbon) only 0.636 times that of wood cut today. Estimate the age of the wood:
(a) 7430 yr (b) 3740 yr (c) 4370 yr (d) 7340 yr
Solution. Answer (from key): (b) 3740 yr. Check: t = (2.303/λ) log(1/0.636), with λ = 0.693/5730 yr-1, gives t = 8267 × 0.4526 ≈ 3742 yr.
Teacher's Note: Radioactive dating is first order: t = (1/λ) ln(N₀/N), with t½ of C-14 = 5730 yr.
Exam Note: Quote t½ = 5730 yr; compute ln(1/0.636) correctly.
Question M1.48. In carbon dating:
(a) the decay rate of C-14 is studied
(b) the rate of accumulation of C-14 is studied
(c) the rate of decay of C-12 is studied
(d) the rate of formation of C-13 is studied
Solution. Answer (from key): (a). The residual activity (decay rate) of C-14 in the sample is compared with that of living matter.
Teacher's Note: Only C-14 is radioactive; C-12 and C-13 are stable, so only C-14 decay can be measured.
Exam Note: Name the isotope studied: C-14 decay.
Three-statement questions
Question M1.49. For CrO5 three statements are given. Mark: (a) all statements correct; (b) II and III correct; (c) I and III correct; (d) only II correct.
(I) Oxidation number of Cr is +6.
(II) Four oxygen atoms are involved in peroxy linkage.
(III) Only one oxygen atom has -2 state.
Solution. Answer (from key): (a). CrO5 has one O2- (double bond to Cr) and two O-O peroxide groups (4 O at -1): Cr + 4(-1) + (-2) = 0, so Cr = +6.
Teacher's Note: Draw the structure: one Cr=O and two peroxo (O2) groups; then verify each statement.
Exam Note: Show the oxidation-number sum equal to zero.
Question M1.50. Mark as in Q49:
(I) The conductance of molten NaCl is due to movement of Na+ and Cl- ions.
(II) Molten NaCl is a good conductor due to mobility of free electrons.
(III) Solid NaCl is a bad conductor of electricity.
Solution. Answer (from key): (c) I and III are correct. Molten NaCl conducts by ion migration, not free electrons; solid NaCl has immobile ions.
Teacher's Note: Ionic compounds conduct only when ions are free to move (molten or dissolved).
Exam Note: Reject electron conduction for ionic melts.
Question M1.51. Mark as in Q49:
(I) Resistance of metals increases on heating.
(II) Unit of cell constant is cm-1.
(III) Specific conductance decreases on dilution.
Solution. Answer (from key): (a) all correct. Metallic resistance rises with temperature; cell constant = l/A (cm-1); specific conductance falls on dilution as ions per cm3 decrease.
Teacher's Note: Specific conductance falls on dilution, whereas molar conductance rises.
Exam Note: Distinguish specific from molar conductance.
Question M1.52. Mark as in Q49:
(I) Oxidation number is same as formal charge.
(II) The numerical value of oxidation number and valency may differ.
(III) Absolute value of electrode potential cannot be determined.
Solution. Answer (from key): (b) II and III are correct. Oxidation number assumes complete electron transfer while formal charge assumes equal sharing, so I is false.
Teacher's Note: Formal charge assumes equal sharing; oxidation number assumes full ionic transfer.
Exam Note: State the sharing assumption difference.
Question M1.53. Mark as in Q49:
(I) Cathode is -ve terminal in both electrolytic and electrochemical cells.
(II) Reduction occurs at cathode, both in electrolytic and electrochemical cells.
(III) Chemical change in electrolytic cell is non-spontaneous.
Solution. Corrected: (b) II and III are correct (the printed key gives (d)). Cathode is negative in an electrolytic cell but positive in a galvanic cell, so I is false; reduction always occurs at the cathode (II true); electrolysis is non-spontaneous (III true).
Teacher's Note: Cathode polarity flips between cells; reduction at cathode never changes.
Exam Note: Check each statement separately.
True or False
Question M1.54. At Curie point, ferromagnetic solid changes to paramagnetic solid.
(a) True (b) False (c) cannot be predicted
Solution. Answer (from key): (a) True. Above the Curie temperature thermal motion destroys domain alignment.
Teacher's Note: Ferromagnetism needs aligned domains, destroyed by heating past the Curie temperature.
Exam Note: Link loss of domain ordering to paramagnetism.
Question M1.55. pH of 10-10 M HCl is 10.
(a) True (b) False (c) cannot be predicted
Solution. Answer (from key): (b) False. Water's own [H+] (10-7 M) dominates, so pH is just below 7 (about 6.996).
Teacher's Note: Acid more dilute than 10-7 M cannot make pH above 7.
Exam Note: Add water's H+ contribution.
Question M1.56. Specific conductance of electrolyte solution decreases on dilution.
(a) True (b) False (c) cannot be predicted
Solution. Answer (from key): (a) True. Fewer ions per cm3 carry current.
Teacher's Note: Specific conductance depends on ions per unit volume; dilution reduces it.
Exam Note: Contrast with molar conductance, which increases.
Question M1.57. 3s-orbital has 2 nodes, inclusive of radial and angular nodes.
(a) True (b) False (c) cannot be predicted
Solution. Answer (from key): (a) True. Total nodes = n - 1 = 2 (both radial, as l = 0).
Teacher's Note: Total nodes n-1; radial nodes n-l-1; angular nodes l.
Exam Note: Use n-l-1 for radial nodes.
Question M1.58. Conductance of LiCl is greater than NaCl at infinite dilution.
(a) True (b) False (c) cannot be predicted
Solution. Answer (from key): (b) False. Li+ is heavily hydrated, so its ionic mobility (λ° = 38.7) is lower than Na+ (50.1).
Teacher's Note: Smaller Li+ has larger hydrated radius, hence lower mobility.
Exam Note: Explain via hydration, not bare size.
Match the column
Question M1.59. [A] Match Column-I with Column-II.
P. Wilkinson catalyst, Q. Speier catalyst, R. Water gas shift catalyst, S. Zeolite ZSM-5 catalyst
I. trans-IrCl(CO)(PPh3)2, II. Hydrosilylation, III. RhCl(PPh3)3, IV. Synthetic gasoline, V. Hydroformylation, VI. Zinc-copper oxide
Options: (a) P-III, Q-II, R-VI, S-IV; (b) P-I, Q-V, R-III, S-IV; (c) P-V, Q-II, R-VI, S-IV; (d) P-III, Q-VI, R-IV, S-II.
[B] Match Column-I with Column-II.
P. Low temperature, Q. Mean speed, R. Internal pressure, S. Excluded volume
I. a/V2, II. Maxwellian distribution, III. b, IV. Adiabatic demagnetisation, V. (a + b/V2)
Options: (a) P-IV, Q-II, R-I, S-III; (b) P-V, Q-IV, R-II, S-III; (c) P-I, Q-II, R-III, S-IV; (d) P-IV, Q-V, R-III, S-II.
Solution. Corrected for [A]: (a). Wilkinson catalyst is RhCl(PPh3)3 (III); Speier catalyst is used in hydrosilylation (II); water-gas shift uses Zn-Cu oxide (VI); ZSM-5 converts methanol to synthetic gasoline (IV). The printed key gives (d), which is wrong. [B]: Answer (from key): (a). Adiabatic demagnetisation reaches very low temperature (P-IV); mean speed belongs to the Maxwell distribution (Q-II); internal pressure is a/V2 (R-I); excluded volume is b (S-III).
Teacher's Note: Match each catalyst by its named use before reading the options.
Exam Note: Know Wilkinson = RhCl(PPh3)3; ZSM-5 = gasoline.
MODULE-2: IIT Entrance Test Paper
Question M2.1. The frequency of de Broglie wave associated with a microscopic particle of mass 10-27 gm is 2.5 × 104 MHz, then the velocity of the particle will be:
(a) 4.08 km/s (b) 5.81 km/s (c) 17.32 km/s (d) 1.22 km/s
Solution. Answer (from key): (a). Check: ν = v/λ and λ = h/mv give v2 = hν/m = (6.626×10-34 × 2.5×1010)/10-30 = 1.66×107 m2/s2, so v ≈ 4.07 km/s.
Teacher's Note: Combine ν = v/λ with λ = h/mv to get v = √(hν/m); convert gm to kg.
Exam Note: Convert 10^-27 gm to 10^-30 kg and MHz to Hz.
Question M2.2. The total number of nodes for 4d-orbital will be:
(a) 2 (b) 3 (c) 0 (d) 1
Solution. Answer (from key): (b). Total nodes = n - 1 = 3 (radial n-l-1 = 1, angular l = 2).
Teacher's Note: Total nodes n-1 splits into radial n-l-1 and angular l.
Exam Note: Quote n-1 and the radial/angular split.
Question M2.3. N2 + 3H2 ⇌ 2NH3 + heat. The activation energy for the forward as well as backward reaction is decreased by 100 J, then equilibrium amount of NH3 will:
(a) increase (b) decrease (c) remain constant (d) cannot be predicted
Solution. Answer (from key): (c). Lowering both activation energies equally acts like a catalyst: both rate constants change by the same factor, so K and the equilibrium amount are unchanged.
Teacher's Note: A catalyst speeds both directions equally; equilibrium position is unaffected.
Exam Note: Say catalyst changes rate, not K.
Question M2.4. During K-electron capture mainly:
(a) γ-rays are emitted (b) β-particles are emitted (c) positron is emitted (d) X-rays are emitted
Solution. Answer (from key): (d). An outer electron drops into the vacancy left in the K-shell, emitting characteristic X-rays.
Teacher's Note: K-capture leaves an inner-shell vacancy, filled with X-ray emission.
Exam Note: Link vacancy filling to X-rays.
Question M2.5. The magnetic moment of an iron compound is 5.918 BM, then the oxidation state of iron in this compound will be:
(a) 0 (b) 1 (c) 2 (d) 3
Solution. Answer (from key): (d). μ = √(n(n+2)) = 5.918 gives n(n+2) = 35, so n = 5 unpaired electrons: Fe3+ (3d5), oxidation state +3.
Teacher's Note: Solve n(n+2) = 35 for unpaired electrons, then match d-configuration.
Exam Note: Show n = 5 and 3d5 for Fe3+.
Question M2.6. Which of the following graphs represents a first order reaction? (Each graph plots t0.33 on the vertical axis against the initial concentration a on the horizontal axis. (a) a horizontal line parallel to the a-axis; (b) a straight line rising from the origin; (c) a straight line falling with a; (d) a curve rising and levelling off.)
Solution. Corrected: (a). For a first-order reaction the time for any fixed fraction of reaction is independent of initial concentration, so t0.33 against a is a horizontal line. The printed key gives (b), which is wrong.
Teacher's Note: Fractional-life times are independent of a only for first order.
Exam Note: Say t-fraction is independent of a.
Question M2.7. For the reaction C6H12O6(s) + 6O2(g) → 6CO2(g) + 6H2O(l); ΔU = -2810 kJ/mol. ΔH in kJ/mol is:
(a) 845 (b) -890 (c) -2810 (d) -2864
Solution. Answer (from key): (c). Δng = 6 - 6 = 0, so ΔH = ΔU + ΔngRT = -2810 kJ/mol.
Teacher's Note: Count only gaseous moles for Δn in ΔH = ΔU + ΔnRT.
Exam Note: Calculate Δn(gas) = 0.
Question M2.8. The standard emf of the cell, set up from the reaction 2Cu+(aq) ⇌ Cu(s) + Cu2+(aq) is 0.36 V at 298 K. The standard free energy change in kJ/mol for this reaction is:
(a) -34.73 (b) -69.46 (c) -3473 (d) -6946
Solution. Answer (from key): (a). n = 1, ΔG° = -nFE° = -(1)(96500)(0.36) = -34740 J ≈ -34.73 kJ/mol.
Teacher's Note: Find n from the electron transfer in the balanced reaction: one electron here.
Exam Note: Write ΔG = -nFE with n = 1.
Question M2.9. When the reaction is first order in A and zero order in B, rate constant is:
(a) -(1/t)(1/[A]0) ln([A]0/[A]t)? (b) (-1/t) ln([A]0/[A]t) (c) (1/t) ln([A]0/[A]t) (d) (1/t)(1/[A]0) ln([A]0/[A]t)
Solution. Answer (from key): (c). Overall the reaction is first order: k = (1/t) ln([A]0/[A]t).
Teacher's Note: Zero order in B means B does not enter the integrated rate equation.
Exam Note: Write the standard first-order integrated form.
Question M2.10. A hypothetical reaction, 2X + Y2 → 2XY follows the mechanism: X + X ⇌ X2 (fast); X2 + Y2 → 2XY (slow). Then the order of reaction is:
(a) 1 (b) 2 (c) 3 (d) undefined
Solution. Answer (from key): (c). Rate = k[X2][Y2], with [X2] = K[X]2 from the fast equilibrium, so rate = kK[X]2[Y2]: order 3.
Teacher's Note: Rate follows the slow step; eliminate the intermediate using the fast equilibrium.
Exam Note: Substitute the intermediate before stating order.
Question M2.11. The inversion of cane sugar in aqueous acidic medium is a reaction of:
(a) zero order (b) first order (c) second order (d) third order
Solution. Answer (from key): (b). Water is in large excess, so the reaction is pseudo-first-order.
Teacher's Note: Excess water and constant acid catalyst make it pseudo-first-order.
Exam Note: Mention excess water.
Question M2.12. Which of the following belongs to, e.g., (double grade) orbitals?
(a) dxy, dyz (b) dyz, dzx (c) dxy, dzx (d) dx²-y², dz²
Solution. Answer (from key): (d). The doubly degenerate set is eg (dx²-y², dz²); dxy, dyz, dzx form the triply degenerate t2g set.
Teacher's Note: e_g has two orbitals pointing along axes; t_2g has three between axes.
Exam Note: Know eg = dx²-y², dz².
Question M2.13. Which among the following is correct about the energy sequence (in case of H-atom)?
(a) 3s < 3p < 3d (b) 3s = 3p = 3d (c) 3s > 3p > 3d (d) 3s > 3p < 3d
Solution. Answer (from key): (b). In a one-electron atom energy depends on n only.
Teacher's Note: Hydrogen-like energy depends only on n, not l.
Exam Note: State that energy depends on n alone.
Question M2.14. If the equivalent weight of an element is 32, then the percentage of oxygen in its oxide is:
(a) 16 (b) 40 (c) 32 (d) 20
Solution. Corrected: (d) 20. Equivalent weight of oxide = 32 + 8 = 40, so % oxygen = (8/40) × 100 = 20. The printed key gives (c), which does not fit the calculation.
Teacher's Note: Oxide equivalent weight = metal's equivalent weight + 8.
Exam Note: Add 8 g oxygen per equivalent.
Question M2.15. Which of the following statements are true?
(a) For gases, in general, viscosity increases with increase in temperature.
(b) For liquids, viscosity varies directly with pressure.
(c) For gases, viscosity is independent of pressure.
(d) All of the above are true.
(e) None of the above
Solution. Answer (from key): (a). Gas viscosity rises with temperature (η ∝ √T). Note: (c) also holds at moderate pressures, so the printed key is accepted as given; see report for human check.
Teacher's Note: Gas viscosity rises with T, unlike liquids where it falls.
Exam Note: Contrast gas and liquid trends with temperature.
Question M2.16. The following figures show the angular probability distribution of: (Left figure: four lobes lying in a plane containing the z-axis, between the axes. Right figure: two lobes along the z-axis with a ring in the xy plane.)
(a) dxy and dyz orbitals (b) dx²-y² and dz² orbitals (c) dxy and dz² orbitals (d) none of these
Solution. Answer (from key): (b). The right figure is dz² (two lobes plus a collar); the left four-lobed figure is taken by the key as dx²-y². This needs human check against the original figure.
Teacher's Note: The collar-and-two-lobes shape is the signature of dz2.
Exam Note: Identify dz2 first.
Question M2.17. The equation E = hν indicates that:
(a) photons have both particle and wave nature (b) photons are waves (c) photons are stream of particles (d) no such inference can be drawn from the given equation
Solution. Answer (from key): (d).
Teacher's Note: Single equation relates energy and frequency; it alone does not state the dual nature.
Exam Note: Read what the equation alone implies.
Question M2.18. In which of the following conditions, the density of N2 is maximum?
(a) STP (b) 273 K and 2 atm (c) 546 K and 1 atm (d) 546 K and 2 atm
Solution. Answer (from key): (b). d = PM/RT is largest at the highest P/T: P/T = 2/273 for (b) against 1/273 (STP), 1/546 and 2/546.
Teacher's Note: Density is proportional to P/T at fixed M.
Exam Note: Compare P/T ratios.
Question M2.19. A sample of natural gas contains 85% CH4 and 15% C2H6. What is the molecular mass of the mixture?
(a) 16.6 (b) 26.6 (c) 30.6 (d) 20.6
Solution. Answer (from key): (a) 16.6. Check: by mole percent, M = 0.85 × 16 + 0.15 × 30 = 18.1 g/mol, which matches none of the printed options; the key's (a) is retained and flagged for human check.
Teacher's Note: Average molar mass = sum of mole fraction times molar mass.
Exam Note: Use mole fractions, not masses.
Question M2.20. Match List-I with List-II: (A) The limits of pH values of buffer solution; (B) The [H3O+] concentration in 0.001 M Ba(OH)2 solution; (C) The buffer capacity of a solution is maximum when conc. of salt to that acid is; (D) Hydrolysis of ethyl acetate in acidic solution.
(i) 5 × 10-12 (ii) Equal (iii) 1st order reaction (iv) pKa ± 1
Codes (A, B, C, D): (a) iv, ii, i, iii; (b) iv, i, iii, ii; (c) i, iv, ii, iii; (d) iv, i, ii, iii
Solution. Answer (from key): (d). (A) pH = pKa ± 1; (B) [OH-] = 0.002 M, so [H3O+] = 10-14/0.002 = 5 × 10-12; (C) capacity maximum at salt : acid = 1; (D) pseudo first order.
Teacher's Note: Compute [H+] for Ba(OH)2 using [OH-] = 2 × 0.001.
Exam Note: Remember Ba(OH)2 gives two OH-.
Question M2.21. Match List-I with List-II: (A) Rate constant has the same unit as the rate of reaction; (B) Reactions having apparent molecularity more than three; (C) Reactions having molecularity two but order of reaction is one; (D) For a reaction A → B, the rate of reaction doubles as the concentration of A is doubled.
(i) One (ii) Zero order reaction (iii) Complex reaction (iv) Pseudo unimolecular reaction
Codes (A, B, C, D): (a) ii, iv, iii, i; (b) ii, iii, iv, i; (c) iii, ii, iv, i; (d) ii, iv, i, iii
Solution. Answer (from key): (b). A-ii, B-iii, C-iv, D-i: the zero-order rate constant has units of rate; a molecularity above three signals a complex reaction; molecularity two with order one is pseudo-unimolecular; doubling rate on doubling concentration means order one.
Teacher's Note: Units of k equal units of rate only for zero order.
Exam Note: Use unit of k to fix order.
Periodic table skeleton: Q22-Q31
Question M2.22. In a skeleton of the periodic table, elements are shown by letters that are not their usual symbols. The positions are: H = period 3, group 1 (Na); L = period 3, group 2 (Mg); Q = period 2, group 17; R = period 3, group 16; J = period 4, d-block (the tenth column of the table); T = end of period 4 (inert gas); M = first element of period 5. Select True (a) or False (b): The greatest ionic character of compounds formed by reaction of pairs of the listed elements would be exhibited by the compound with formula M2Q.
Solution. Answer (from key): (b) False. M is an alkali metal and Q a halogen, so the compound is MQ, not M2Q.
Teacher's Note: Group 1 plus group 17 gives a 1:1 formula.
Exam Note: Balance charges: +1 and -1.
Question M2.23. (Same table.) The J2+ ion is coloured and has an electronic configuration of 1s2 2s2 2p6 3s2 3p6 3d7. True (a) or False (b)?
Solution. Answer (from key): (b) False. Taken from the figure, J sits in the tenth column of period 4 (nickel), whose 2+ ion is 3d8, not 3d7.
Teacher's Note: Count column position; d-electron count follows from group number.
Exam Note: Find J's group, then its ion's d-count.
Question M2.24. (Same table.) The carbonate of compound H is insoluble in water. True (a) or False (b)?
Solution. Answer (from key): (b) False. H is sodium; Na2CO3 is soluble in water.
Teacher's Note: Alkali metal carbonates are water-soluble (except Li).
Exam Note: Name H as sodium.
Question M2.25. (Same table.) Element R is a gas at room temperature. True (a) or False (b)?
Solution. Answer (from key): (b) False. R is in period 3, group 16 (sulphur), a solid.
Teacher's Note: Identify the group of R from the figure; sulphur is a solid.
Exam Note: Name R, then state its physical state.
Question M2.26. (Same table.) Element T is an inert gas with an electronic configuration 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6. True (a) or False (b)?
Solution. Answer (from key): (a) True. This is krypton, at the end of period 4.
Teacher's Note: Complete 4p6 with filled 3d10 4s2 is Kr.
Exam Note: Match configuration to period 4 end.
Question M2.27. 20 cm3 of a gaseous element X reacts with excess of an element Y to form 40 cm3 of a gaseous compound of X and Y. All volumes are measured under the same conditions of temperature and pressure. Select True (a) or False (b): Molecule of X contains at least two atoms of X.
Solution. Corrected: (a) True. By Avogadro's law, 1 molecule of X gives 2 molecules of compound, each containing at least one atom of X, so X must have at least two atoms per molecule. The printed key gives (b), which contradicts this argument.
Teacher's Note: Equal volumes mean equal molecule numbers; twofold volume means twofold molecules.
Exam Note: Use Avogadro's law with volume ratio.
Question M2.28. (Same data.) The formula of the compound formed is XY. True (a) or False (b)?
Solution. Answer (from key): (a) True. The simplest reaction X2 + Y2 → 2XY fits the 1 : 2 volume ratio.
Teacher's Note: 1:2 volume ratio fits X2 + Y2 giving 2XY.
Exam Note: Write the balanced equation from volumes.
Question M2.29. (Same data.) Molecules of X cannot consist of more than two atoms. True (a) or False (b)?
Solution. Answer (from key): (b) False. For example, X4 + Y2 → 2X2Y also gives 40 cm3 from 20 cm3, so more than two atoms is possible.
Teacher's Note: Test a tetra-atomic X; it still gives a 1:2 volume ratio.
Exam Note: Give one counter-example.
Question M2.30. (Same data.) X is less dense than the compound of X and Y. True (a) or False (b)?
Solution. Answer (from key): (b) False. Molar masses of X2 and XY are not related by the data given, so the statement cannot be established.
Teacher's Note: Density comparison needs atomic masses, which are not given.
Exam Note: Say data is insufficient for comparison.
Question M2.31. (Same data.) Y is less dense than the compound of X and Y. True (a) or False (b)?
Solution. Answer (from key): (b) False. Y's density versus the compound depends on atomic masses; the compound contains Y, but gas density depends on molar mass, which is not given.
Teacher's Note: Same logic as the previous question; atomic masses are unknown.
Exam Note: Do not assume a heavier compound.
Assertion-Reason Type Questions (Q32-36)
Question M2.32. Assertion (A): In hydrogen spectrum (6569 Å) line is observed in Balmer series.
Reason (R): Balmer lines are found in ultraviolet region.
(a) Both correct and R explains A (b) Both correct but R does not explain A (c) R correct, A wrong (d) A correct, R wrong
Solution. Answer (from key): (d). The 6563 Å (about 6569 Å) Hα line is a visible-region Balmer line; Balmer lines are in the visible, not the ultraviolet.
Teacher's Note: Balmer lines are visible; Lyman lines are ultraviolet.
Exam Note: Name the region of each hydrogen series.
Question M2.33. Assertion (A): All Arrhenius acids are also Bronsted acids.
Reason (R): All Bronsted bases are also Lewis bases.
Options as in Q32.
Solution. Answer (from key): (d). The key treats A as correct and R as wrong; this should be checked by a human against the original text.
Teacher's Note: Arrhenius acid is an H+ source, hence also a Bronsted acid.
Exam Note: Check each statement separately.
Question M2.34. Assertion (A): All p-orbitals are directional.
Reason (R): p-orbitals are oriented along axes.
Options as in Q32.
Solution. Answer (from key): (a). Each p orbital has a dumbbell shape along a particular axis, which is why it is directional.
Teacher's Note: p orbitals are dumbbell-shaped along x, y, or z.
Exam Note: Link orientation to directionality.
Question M2.35. Assertion (A): 0.1 M NaCl + 0.05 M HCl solution on mixing in equal volume forms a buffer solution.
Reason (R): The solution is a mixture of salt and acid thus acts as buffer.
Options as in Q32.
Solution. Answer (from key): (b). Note: NaCl is a salt of a strong acid, so the mixture is not a buffer; the key is kept as printed and flagged for human check.
Teacher's Note: A buffer needs a weak acid or base with its conjugate.
Exam Note: Distinguish strong-acid mixtures from buffers.
Question M2.36. Assertion (A): Number of revolutions per second by an electron is same in all shells.
Reason (R): Orbital frequency = v/2πr.
Options as in Q32.
Solution. Answer (from key): (c). Orbital frequency v/2πr is correct, but v and r change with the shell, so the frequency is not the same in all shells.
Teacher's Note: Frequency falls as n increases; ν ∝ 1/n³.
Exam Note: Use ν = v/2πr with changing r and v.
Questions with more than one correct option
Question M2.37. The substance(s) which can act as oxidising as well as reducing agent is/are:
(a) H2O2 (b) O3 (c) NH2-NH2 (d) HNO3
Solution. Answer (from key): (a, b, c). H2O2 (O in -1), O3 and hydrazine (N in -2) have intermediate oxidation states; HNO3 (N at +5) can only oxidise.
Teacher's Note: A species at an intermediate oxidation state can both gain and lose electrons.
Exam Note: Check intermediate oxidation states.
Question M2.38. Which of the following statement(s) is/are correct?
(a) The electronic configuration of Cr is [Ar] 3d5, 4s1.
(b) The magnetic quantum number may have a negative value.
(c) In silver, 23 electrons have a clockwise spin and 24 electrons have anticlockwise spin.
(d) The oxidation number of N in N3H is -3.
Solution. Answer (from key): (a, b, c). (d) is false: in HN3 the average oxidation number of N is -1/3.
Teacher's Note: Half-filled 3d5 gives Cr extra stability; m ranges from -l to +l.
Exam Note: Check HN3 average N oxidation state.
Question M2.39. Loss of a β-particle is equivalent to:
(a) increase in number of protons by one (b) decrease in number of neutrons by one (c) change in atomic mass by one unit (d) none of the above
Solution. Answer (from key): (a, b). A neutron converts to a proton: n → p + e-, so atomic number rises by 1, neutrons fall by 1, mass number unchanged.
Teacher's Note: Beta emission changes atomic number, not mass number.
Exam Note: Write n → p + β.
Question M2.40. Following curve shows the energy spectrum of β-particles. (Figure: number of particles on the vertical axis against energy of particles in MeV from 0 to 1.2; the curve rises to a peak near 0.2 MeV then falls smoothly to zero near 1.2 MeV.) The curve indicates:
(a) β-ray spectrum is continuous (b) different β-particles have different energies (c) the energy spectrum of β-particles of all the elements is the same (d) no β-particle has energy more than 1 MeV
Solution. Answer (from key): (a, b). The curve is continuous with a spread of energies; (d) is false because the curve extends beyond 1 MeV to about 1.2 MeV.
Teacher's Note: The continuous spread led to the neutrino hypothesis.
Exam Note: Read the plot's maximum energy.
Question M2.41. Maximum velocity of a liquid up to which its flow is streamline is called critical velocity. The critical velocity of a liquid depends upon:
(a) coefficient of viscosity (b) radius of the tube (c) density of the liquid (d) mass of the tube
Solution. Answer (from key): (a, b, c). vc = Kη/(ρr) from the Reynolds number.
Teacher's Note: Critical velocity is set by the Reynolds number: η, ρ and r.
Exam Note: Quote v_c = K η/(ρ r).
Question M2.42. When a liquid solidifies, generally, there is:
(a) decrease in enthalpy (b) decrease in entropy (c) increase in enthalpy (d) increase in entropy
Solution. Answer (from key): (a, b). Freezing releases heat (ΔH < 0) and the molecules become more ordered (ΔS < 0).
Teacher's Note: Freezing is exothermic and increases order.
Exam Note: Give signs of ΔH and ΔS.
Question M2.43. Which of the following set(s) of chemical compounds is/are used as semipermeable membrane?
(a) calcium phosphate, cellulose nitrate (b) calcium phosphate, copper ferrocyanide (c) cellulose nitrate, copper ferrocyanide (d) copper ferrocyanide, copper sulphate
Solution. Answer (from key): (a, b, c). Calcium phosphate, cellulose nitrate and copper ferrocyanide are used as semipermeable membranes; copper sulphate is not.
Teacher's Note: Copper ferrocyanide is the classic Pfeffer membrane.
Exam Note: Name Pfeffer's membrane.
Question M2.44. For the depression in freezing point, the correct statement(s) is/are:
(a) The vapour pressure of pure solvent is more than that of solution.
(b) The vapour pressure of pure solvent is less than that of solution.
(c) Only solute molecules solidify at the freezing point.
(d) Only solvent molecules solidify at the freezing point.
Solution. Answer (from key): (a, d). A non-volatile solute lowers the vapour pressure; only pure solvent separates as solid on freezing.
Teacher's Note: Freezing point is where solid and liquid solvent have equal vapour pressure.
Exam Note: State lower VP of solution.
Question M2.45. For exact determination of molecular mass:
(a) solute must be volatile (b) solution must be very dilute (c) solution must be of similar components (d) solute must not be dissociated or associated
Solution. Answer (from key): (b, d). Colligative formulas hold exactly for very dilute solutions and for non-electrolytes that neither dissociate nor associate.
Teacher's Note: Colligative laws assume ideal dilute solutions and van't Hoff factor 1.
Exam Note: Mention i = 1 condition.
Match the column (Q46-47)
Question M2.46. Match Column-I with Column-II: (a) de Broglie equation, (b) Lyman series, (c) Wavelength associated with particle of mass m, (d) 6.6 × 10-19 J energy per photon
(p) λ = h/p, (q) λ = h/√(2Em), (r) Transition from higher shell to K-shell, (s) Ultraviolet radiation
Solution. Answer (from key): (a-p, q), (b-r, s), (c-p, q), (d-r, s). The de Broglie relation can be written as h/p or h/√(2Em); Lyman lines end at n = 1 (K-shell) in the ultraviolet; a 6.6 × 10-19 J photon has λ = hc/E = 300 nm, which is ultraviolet; the key pairs it with (r, s).
Teacher's Note: λ = hc/E gives 300 nm for 6.6e-19 J, hence ultraviolet.
Exam Note: Compute λ = hc/E for the photon.
Question M2.47. Match Column-I with Column-II: (a) Mn, (b) Body-centred cubic, (c) ABC ABC ABC, (d) Be
(p) Radius ratio (0.732 - 1), (q) Hexagonal close-packed, (r) Packing (0.68), (s) Number of constituent units in one unit cell (1)
Solution. Answer (from key): (a-s), (b-p, r), (c-q), (d-q). Body-centred cubic has packing efficiency 0.68 and r+/r- relation √3 - 1 = 0.732; Be is hexagonal close-packed. The key's pairing for (c) and (a) is reproduced as printed and is flagged for human check, since ABC stacking is cubic close-packed.
Teacher's Note: bcc has packing fraction 0.68; ABC stacking is cubic close-packed.
Exam Note: Remember bcc efficiency 68%.
Numerical answer questions (Q48-49)
Question M2.48. 75.2 g of C6H5COOH is dissolved in a kg of benzene to lower its freezing point by 7 K. Kf for benzene is 14 K kg mol-1. Calculate the percentage association when it forms a dimer.
Solution. Answer: 38. Taking the benzene mass as 1 kg (printed as 'a kg'): ΔT = i·Kf·(wB × 1000)/(mB × wA), so 7 = i × 14 × (75.2 × 1000)/(122 × 1000), giving i = 0.81. For a dimer i = 1 - α/2, so α = (1 - 0.81)/(1 - 1/2) = 0.38; percentage association = 38.
Teacher's Note: For dimerisation i = 1 - α/2; solve for α from i.
Exam Note: Use molar mass 122 for benzoic acid.
Question M2.49. A sample of gas present in a cylinder fitted with a frictionless piston expands against a constant pressure of 1 atm from a volume of 2 L to 12 L. During this process, it absorbs 600 J heat from its surroundings. Calculate the decrease in the internal energy of the system in joule.
Solution. Answer: 413 J. Work done by gas = P·ΔV = 1 × 10 × 101.3 = 1013 J; ΔU = q + w = 600 - 1013 = -413 J, so internal energy decreases by 413 J.
Teacher's Note: Work done by the gas is negative in w; convert L atm to J with 101.3.
Exam Note: Apply ΔU = q + w with correct signs.
Predict whether the following statements are True/False (Q50-54)
Question M2.50. For mixing of two ideal gases at 25°C and 1 atm, ΔGmix = 0. True (a) or False (b)?
Solution. Corrected: (b) False. For ideal gases mixing at constant T and P, ΔGmix = nRT Σ x ln x, which is negative (spontaneous). The printed key gives (a).
Teacher's Note: ΔG_mix is negative, ΔH_mix is zero for ideal mixing.
Exam Note: Write ΔG_mix = nRT Σ x ln x.
Question M2.51. For mixing of two ideal gases at 25°C and 1 atm, ΔSmix = 0. True (a) or False (b)?
Solution. Answer (from key): (b) False. ΔSmix = -nR Σ x ln x, which is positive.
Teacher's Note: Mixing increases randomness, so entropy rises.
Exam Note: State ΔS_mix is positive.
Question M2.52. Isobaric thermal coefficient of an ideal gas is 'R'. True (a) or False (b)?
Solution. Answer (from key): (a) True per the key. Note: the coefficient (1/V)(∂V/∂T)P equals 1/T for an ideal gas (as Test Series III Q10 states), while (∂V/∂T)P = R/P for 1 mol; flagged for human check.
Teacher's Note: Define it through V and T at constant P.
Exam Note: State the definition used.
Question M2.53. The criterion for the spontaneity of a process is ΔSsystem > 0. True (a) or False (b)?
Solution. Answer (from key): (b) False. Spontaneity needs ΔStotal (system + surroundings) > 0.
Teacher's Note: Include entropy change of surroundings.
Exam Note: Use ΔS_total, not ΔS_system.
Question M2.54. Radioactive element undergoes complete decay in twice of half life. True (a) or False (b)?
Solution. Answer (from key): (b) False. After two half-lives 25% remains; decay is exponential and never complete in finite time.
Teacher's Note: Two half-lives leave one quarter, not zero.
Exam Note: Calculate remaining fraction 1/4.
IIT Entrance Test Papers: Test Series I, Section I (Reasoning Aptitude). Keys for Assertion (A) and Reason (R): (a) both correct and R explains A; (b) both correct but R does not explain A; (c) A correct, R incorrect; (d) A incorrect, R correct
Question TS1.1. (A) Noble gases can be liquefied. (R) Attractive forces can exist between non-polar molecules.
Solution. Answer (from key): (b). Weak London (dispersion) forces between non-polar atoms allow liquefaction at low temperature. The key's choice of (b) over (a) is debatable and flagged for human check.
Teacher's Note: Noble-gas liquefaction depends on weak dispersion forces.
Exam Note: Name the force: London dispersion.
Question TS1.2. (A) Boiling point of a solvent increases when a non-volatile solute is dissolved in it. (R) The boiling point of a liquid is the temperature at which vapour pressure equals the vapour pressure of the atmosphere.
Solution. Answer (from key): (b). Both statements are true; the solute lowers vapour pressure, so a higher temperature is needed to reach atmospheric pressure, but R is only the definition.
Teacher's Note: Elevation arises from vapour-pressure lowering by the solute.
Exam Note: State the definition of boiling point.
Question TS1.3. (A) A mixture of sodium acetate and sodium propionate forms a buffer solution. (R) A buffer solution reacts with small quantities of hydrogen or hydroxyl ions and keeps the pH almost same.
Solution. Corrected: (d). A is wrong because both are salts of weak acids and no weak acid or conjugate base pair with its acid is present; R is a correct definition. The printed key gives (b).
Teacher's Note: A buffer needs a weak acid with its conjugate base (or weak base with conjugate acid).
Exam Note: Check for a conjugate acid-base pair.
Question TS1.4. (A) The pressure of a fixed amount of an ideal gas is proportional to its temperature at constant volume. (R) Ideal gas molecules neither attract nor repel.
Solution. Answer (from key): (b). P ∝ T (Gay-Lussac) holds; R is also true but the proportionality arises because kinetic energy is proportional to T.
Teacher's Note: P ∝ T because mean kinetic energy ∝ T.
Exam Note: Cite Gay-Lussac's law.
Question TS1.5. (A) In a radioactive disintegration, an electron is emitted by the nucleus. (R) Electrons are always present inside the nucleus.
Solution. Answer (from key): (c). β- arises from n → p + e- at the nucleus; electrons are not pre-existing in the nucleus.
Teacher's Note: The emitted β is created when a neutron converts to a proton.
Exam Note: Write n → p + e- + antineutrino.
Question TS1.6. (A) The ratio CP/CV for a diatomic gas is more than that for a monoatomic gas. (R) The molecules of a monoatomic gas have less degrees of freedom than those of a diatomic gas.
Solution. Answer (from key): (d). γ for monoatomic gas is 1.67 and for diatomic 1.4, so A is false; R is true.
Teacher's Note: γ = 1 + 2/f: more degrees of freedom gives lower γ.
Exam Note: Use γ = 1 + 2/f.
Question TS1.7. (A) Many endothermic reactions that are not spontaneous at room temperature become spontaneous at high temperature. (R) Entropy of the system increases with increase in temperature.
Solution. Answer (from key): (b). At high T the TΔS term outweighs ΔH in ΔG = ΔH - TΔS, making ΔG negative.
Teacher's Note: ΔG = ΔH - TΔS turns negative at high T if ΔS > 0.
Exam Note: Write the ΔG expression.
Question TS1.8. (A) No two electrons in an atom can have the same values of four quantum numbers. (R) No two electrons in an atom can be simultaneously in the same shell, subshell, orbitals and have same spin.
Solution. Answer (from key): (a). R is the Pauli exclusion principle restated, which explains A.
Teacher's Note: Pauli principle: two electrons in an orbital must have opposite spins.
Exam Note: Name the Pauli exclusion principle.
Question TS1.9. (A) In radioactive disintegrations, 2He4 nuclei can come out of the nucleus but lighter 2He3 cannot. (R) Binding energy of 2He3 is more than that of 2He4.
Solution. Answer (from key): (c). Alpha particles are very stable (high binding energy per nucleon); He-4 has the greater binding energy, so R is false.
Teacher's Note: He-4 is exceptionally stable: high binding energy.
Exam Note: Compare binding energy per nucleon.
Question TS1.10. (A) A crystal having fcc structure is more closely packed than a crystal having bcc structure. (R) Packing fraction for fcc structure is double that of bcc structure.
Solution. Answer (from key): (c). Packing fraction is 74% for fcc and 68% for bcc, so R is false.
Teacher's Note: fcc 74% against bcc 68%.
Exam Note: Quote packing fractions 0.74 and 0.68.
Section II: Select the correct alternative among the given options (For AIEEE and Medical Entrance Aspirants)
Question TS1.11. Pick out the pair in which the energy change of one is reverse of the other: (1) radio (2) fluorescent lamp (3) toaster (4) photoelectric cell
(a) 1 and 2 (b) 2 and 3 (c) 2 and 4 (d) 3 and 4
Solution. Answer (from key): (c). A fluorescent lamp changes electrical energy to light; a photoelectric cell changes light to electrical energy.
Teacher's Note: Look for opposite conversions: electricity-to-light versus light-to-electricity.
Exam Note: Name each conversion.
Question TS1.12. Consider the following statements about first order reaction: (1) The rate of reaction is directly proportional to the concentration of the reactant. (2) Its half life period is always constant. (3) Concentration of reactant falls exponentially. (4) It has low activation energy.
Of these statements: (a) 1, 3 and 4 are correct (b) 1, 2 and 4 are correct (c) 1, 2 and 3 are correct (d) 2, 3 and 4 are correct
Solution. Answer (from key): (c). Rate = k[A], t1/2 = 0.693/k is constant, and [A] = [A]0e-kt; activation energy is unrelated to the order.
Teacher's Note: Order does not tell you the size of the activation energy.
Exam Note: State t1/2 = 0.693/k.
Question TS1.13. Which one of the following is the correct order of energies of 3p, 3d, 4s and 4p orbitals as per Aufbau principle?
(a) 3p < 3d < 4s < 4p (b) 3p < 4s < 3d < 4p (c) 3d < 4s < 4p < 3p (d) 3d < 3p < 4p < 4s
Solution. Answer (from key): (b). The (n + l) values are 3p = 4, 4s = 4, 3d = 5, 4p = 5; for equal n + l the lower n is lower in energy, so 3p < 4s < 3d < 4p.
Teacher's Note: (n + l) rule; ties are broken by lower n.
Exam Note: Tabulate n + l for each.
Question TS1.14. In the emission line spectra of hydrogen atom, how many lines can be accounted for by all possible electron transitions between five lowest energy levels within the atom?
(a) 4 (b) 5 (c) 10 (d) 20
Solution. Answer (from key): (c). Lines = n(n - 1)/2 = 5 × 4/2 = 10.
Teacher's Note: Count pairs of levels: n(n-1)/2.
Exam Note: Use n(n-1)/2 for five levels.
Question TS1.15. In a closed container at 1 atm pressure, 2 mole of SO2(g) and 1 mole of O2(g) were allowed to react to form SO3(g) under the influence of a catalyst: 2SO2(g) + O2(g) ⇌ 2SO3(g). At equilibrium it was found that 50% of SO2(g) was converted to SO3(g). The partial pressure of O2(g) at equilibrium will be:
(a) 0.66 atm (b) 0.493 atm (c) 0.33 atm (d) 0.2 atm
Solution. Answer (from key): (d). At equilibrium: SO2 = 1 mol, O2 = 0.5 mol, SO3 = 1 mol; total 2.5 mol at 1 atm, so p(O2) = (0.5/2.5) × 1 = 0.2 atm.
Teacher's Note: Partial pressure = mole fraction times total pressure.
Exam Note: Write the ICE table first.
Question TS1.16. The electronic configuration 1s2, 2s2 2p5, 3s1 describes which one of the following?
(a) An excited state of fluorine atom (b) The ground state of neon (c) The excited state of O2- (d) The ground state of fluoride ion F-
Solution. Answer (from key): (c). The configuration has 10 electrons; O2- has 10 electrons and its ground state is 2p6, so this is an excited state of O2-. Fluorine has only 9 electrons.
Teacher's Note: Count electrons first; 10 electrons cannot be neutral F.
Exam Note: Count total electrons.
Question TS1.17. When acetone and chloroform are mixed, hydrogen bonding takes place between them; such a liquid pair will cause:
(a) positive deviation from Raoult's law (b) negative deviation from Raoult's law (c) no deviation from Raoult's law (d) cannot be predicted
Solution. Answer (from key): (b). Stronger A-B attraction lowers the vapour pressure below the Raoult's law value (ΔHmix < 0, ΔVmix < 0).
Teacher's Note: Stronger unlike attraction gives negative deviation.
Exam Note: Link H-bonding to lower vapour pressure.
Question TS1.18. A maxima or minima obtained in the temperature-composition curve of a mixture of two liquids indicates:
(a) that the liquids are immiscible with one another (b) that the liquids are partially miscible at the maximum or minimum (c) an azeotropic mixture (d) a eutectic formation
Solution. Answer (from key): (c). An extremum in the boiling-point curve marks an azeotrope that distils at constant composition.
Teacher's Note: Azeotropes show a boiling-point maximum or minimum.
Exam Note: Define azeotrope.
Question TS1.19. The electrode reactions for charging of a lead battery are: PbSO4 + 2e → Pb + SO42-; PbSO4 + 2H2O → PbO2 + SO42- + 4H+ + 2e. The electrolyte in the battery is an aqueous solution of H2SO4. After this battery has been charged:
(a) the sulphuric acid will be more concentrated (b) the sulphuric acid will be less concentrated (c) the concentration of H2SO4 will be unchanged (d) H2SO4 will have been completely decomposed
Solution. Answer (from key): (a). Charging produces SO42- and H+ at both electrodes, regenerating H2SO4.
Teacher's Note: Charging reverses discharge, which consumes acid.
Exam Note: Note that both reactions release ions.
Question TS1.20. At 291 K, the molar conductivity at infinite dilution of NH4Cl, NaOH, NaCl are 129.8, 217.4, 108.9 ohm-1 cm2 mol-1 respectively. If the molar conductivity of a centinormal solution of NH4OH is 9.33 ohm-1 cm2 mol-1, what is the percentage dissociation of NH4OH at this dilution?
(a) 0.392 (b) 39.2 (c) 3.92 (d) 0.039
Solution. Answer (from key): (c). Λ°(NH4OH) = 129.8 + 217.4 - 108.9 = 238.3; α = 9.33/238.3 = 0.03915, so 3.92%.
Teacher's Note: Kohlrausch's law gives Λ° of the weak electrolyte; α = Λ/Λ°.
Exam Note: Show Kohlrausch combination.
Question TS1.21. Through molten AlCl3, a charge equal to the charge of 1 mole N3- was passed. Volume of Cl2 evolved at anode will be:
(a) 22.4 litre (b) 67.2 litre (c) 33.6 litre (d) 11.2 litre
Solution. Answer (from key): (c). Charge of 1 mol N3- is 3 F; 3 F liberates 3 equivalents of chlorine = 1.5 mol Cl2 = 1.5 × 22.4 = 33.6 L at STP.
Teacher's Note: Each faraday liberates one equivalent; Cl2 has two equivalents per mole.
Exam Note: Convert 3 F to 1.5 mol Cl2.
Question TS1.22. The rate constant of a reaction will be equal to pre-exponential factor when:
(a) temperature in centigrade is zero (b) absolute temperature is zero (c) absolute temperature is infinity (d) no suitable answer
Solution. Answer (from key): (c). In k = Ae-Ea/RT the exponential becomes 1 as T → ∞, so k = A.
Teacher's Note: Exponent tends to zero as T becomes very large.
Exam Note: Use the Arrhenius equation limit.
Question TS1.23. The energy levels of A, B and C of certain atoms correspond to increasing values of energy, i.e., EA < EB < EC. If λ1, λ2 and λ3 are wavelengths of radiations corresponding to transitions C to B, B to A and C to A respectively, which of the following relation is correct?
(a) λ3 = λ1 + λ2 (b) λ3 = λ1λ2/(λ1 + λ2) (c) λ1 + λ2 + λ3 = 0 (d) λ32 = λ12 + λ22
Solution. Answer (from key): (b). E(C→A) = E(C→B) + E(B→A), so hc/λ3 = hc/λ1 + hc/λ2, giving λ3 = λ1λ2/(λ1 + λ2).
Teacher's Note: Energies add, so wavenumbers add (not wavelengths).
Exam Note: Add energies, then invert.
Question TS1.24. A stationary hydrogen atom emits a photon corresponding to the first line of Lyman series. What velocity does the atom acquire?
(a) 3.25 m/sec (b) 2.35 m/sec (c) 3.52 m/sec (d) 5.23 m/sec
Solution. Answer (from key): (a). Photon energy 10.2 eV gives momentum p = E/c = (10.2 × 1.6×10-19)/(3×108) = 5.4×10-27 kg m/s; v = p/m = 5.4×10-27/1.67×10-27 ≈ 3.25 m/s.
Teacher's Note: Recoil conserves momentum: v = (photon momentum)/(atom mass).
Exam Note: Compute photon momentum E/c.
Question TS1.25. Which of the following transitions is not allowed in the normal electronic spectrum of an atom?
(a) 2p → 1s (b) 3d → 2p (c) 5p → 3s (d) 2s → 1s
Solution. Answer (from key): (d). The selection rule Δl = ±1 forbids s → s (Δl = 0).
Teacher's Note: Selection rule: Δl = ±1.
Exam Note: State Δl = ±1.
Question TS1.26. How many spectral lines can be observed when an excited electron returns from 7th to 2nd shell?
(a) 10 (b) 15 (c) 20 (d) 14
Solution. Answer (from key): (b). Levels 2 to 7 give n1 = 2, n2 = 7: lines = (n2 - n1)(n2 - n1 + 1)/2 = 5 × 6/2 = 15.
Teacher's Note: Number of lines is the pair count among 6 levels.
Exam Note: Use (Δn)(Δn+1)/2.
Question TS1.27. Two lines of Balmer series of hydrogen are 486.1 and 410.2 nm. If the difference of wave numbers of these lines corresponds to a line in the series, to which of the following series does the line belong?
(a) Brackett (b) Paschen (c) Pfund (d) Humphrey
Solution. Corrected: (a) Brackett. The two lines are 4 → 2 and 6 → 2, so the wavenumber difference is that of 6 → 4: R(1/16 - 1/36) = 3.8×103 cm-1 (λ about 2.6 µm), which ends at n = 4, the Brackett series. The printed key gives (c).
Teacher's Note: Wavenumber difference between two lines ending at n=2 is the line between their upper levels.
Exam Note: Identify upper levels 4 and 6.
Question TS1.28. For a third order reaction, half life is given as:
(a) t1/2 ∝ 1/a (b) t1/2 ∝ 1/a2 (c) t1/2 ∝ a2 (d) t1/2 ∝ a
Solution. Answer (from key): (b). t1/2 ∝ 1/an-1, with n = 3 giving 1/a2.
Teacher's Note: General rule t1/2 ∝ a^(1-n).
Exam Note: Quote t1/2 ∝ 1/a^(n-1).
Question TS1.29. What specific name can be given to the following sequence of steps? Hg + hν → Hg*; Hg* + H2 → Hg + H2*; H2* → 2H
(a) Photosensitization (b) Photosorption (c) Phosphorescence (d) Chemiluminescence
Solution. Answer (from key): (a). Mercury absorbs the light and transfers the energy to H2, which dissociates: photosensitization.
Teacher's Note: The absorber transfers energy to a species that does not absorb.
Exam Note: Define photosensitiser.
Question TS1.30. If the tetrahedral sites in a ccp array of negative ions (B) were half filled with cations (A), the empirical formula of the compound will be:
(a) A2B3 (b) A2B (c) AB2 (d) AB
Solution. Answer (from key): (d). For n anions there are 2n tetrahedral voids; half filled gives n cations, so A : B = 1 : 1 and the formula is AB.
Teacher's Note: n anions give 2n tetrahedral and n octahedral voids.
Exam Note: Count voids per anion.
Question TS1.31. An electron in the p-orbital has an orbital angular momentum of:
(a) √2 h (b) √2 h/2π (c) h/π (d) h/2π
Solution. Answer (from key): (b). L = √(l(l+1)) h/2π with l = 1 gives √2 h/2π.
Teacher's Note: p orbital means l = 1.
Exam Note: Substitute l = 1.
Question TS1.32. An electron of velocity 'v' is found to have a certain value of de Broglie wavelength. The velocity to be possessed by a neutron to have the same de Broglie wavelength is:
(a) 1840v (b) v/1840 (c) v (d) 1840/v
Solution. Answer (from key): (b). Equal λ means equal momentum: mnv' = mev, and mn ≈ 1840 me, so v' = v/1840.
Teacher's Note: Same λ means same momentum; heavier particle moves slower.
Exam Note: Equate m·v for both.
Question TS1.33. van't Hoff factor of HCN is 1.00002 in a dilute aqueous solution. The percentage degree of dissociation of the acid is:
(a) 2 × 10-5 (b) 1 × 10-5 (c) 2 × 10-3 (d) 1 × 10-3
Solution. Answer (from key): (c). For HCN (n = 2): α = (i - 1)/(n - 1) = 0.00002, so percentage dissociation = 0.002 = 2 × 10-3.
Teacher's Note: α = (i-1)/(n-1) with n = 2 ions.
Exam Note: Convert α to a percentage.
Question TS1.34. The average life of a radioactive element is 10 minute. In 10 minute what percentage of a radioactive element will decay?
(a) 50% (b) 63.21% (c) 75% (d) 100%
Solution. Answer (from key): (b). With t = τ = 1/λ, the fraction left is e-1 = 0.3679, so 1 - 0.3679 = 63.21% decays.
Teacher's Note: Average life is the time for decay to 1/e.
Exam Note: Compute 1 - e^-1.
Question TS1.35. Which of the following corresponds to zero order reaction? (Three plots of rate on the vertical axis against time: (a) a falling curve; (b) a rising curve levelling off; (c) a horizontal straight line; (d) none of these.)
Solution. Answer (from key): (c). The rate of a zero-order reaction is constant with time.
Teacher's Note: Rate = k[A]^0 does not change as reactant is consumed.
Exam Note: Say rate does not depend on concentration.
Question TS1.36. The equilibrium constant Kp for the reaction X(g) + Y(g) ⇌ Z(g) is found to vary with temperature in the diagram as shown (Kp on the vertical axis against 1/T, falling curve).
(a) The reaction is exothermic in forward reaction (b) The equilibrium mixture contains a high proportion of Z at higher pressure (c) The equilibrium mixture contains a high proportion of Z at high temperature (d) The equilibrium is unaffected by addition of inert gas
Solution. Answer (from key): (b). The reaction has fewer gas moles on the right (2 → 1), so higher pressure favours Z. Kp falls as 1/T rises, so Kp rises with T and the reaction is endothermic; (a) and (c) are false.
Teacher's Note: Fewer product moles are favoured by higher pressure; slope of ln K against 1/T gives sign of ΔH.
Exam Note: Use Le Chatelier on mole change.
Question TS1.37. Helium was discovered in sun's atmosphere by analysing:
(a) Mayer hoff bands (b) Fraunhofer lines (c) spectrum (d) spectrometer
Solution. Answer (from key): (b).
Teacher's Note: Helium was first seen as a bright yellow line in the solar spectrum.
Exam Note: Name Fraunhofer (solar spectrum) lines.
Question TS1.38. For an ideal solution of miscible components: ΔSmix = -R Σ ni log xi
(a) ΔSmix is a negative quantity (b) ΔSmix is a positive quantity (c) ΔSmix is zero (d) ΔSmix is sometimes negative and sometimes positive
Solution. Answer (from key): (b). xi < 1 makes log xi negative, so ΔSmix is positive.
Teacher's Note: Mole fractions below 1 give negative logs, flipping the sign.
Exam Note: Note the minus sign in the formula.
Question TS1.39. Specific conductance of a conductivity solution:
(a) increases with dilution (b) decreases with dilution (c) is independent of concentration (d) depends upon the cell constant
Solution. Answer (from key): (b). Dilution reduces the number of ions per unit volume.
Teacher's Note: Specific conductance counts ions per cm3.
Exam Note: Contrast with molar conductance.
Question TS1.40. In the oxide of a compound 'A', oxide ions are arranged in hexagonal close packing and A3+ ions occupy two-thirds of the octahedral voids. What is the formula of corundum?
(a) AO (b) A2O (c) A2O3 (d) AO2
Solution. Answer (from key): (c). For n oxide ions there are n octahedral voids; two-thirds occupied gives 2n/3 A3+, so A : O = 2 : 3 and the formula is A2O3.
Teacher's Note: n close-packed ions give n octahedral voids.
Exam Note: Count voids per oxide ion.
Question TS1.41. Spinel structure is shown by:
(a) MgAl2O4 (b) ZnAl2O4 (c) MgFe2O4 (d) all of these
Solution. Answer (from key): (d). All have the AB2O4 spinel structure.
Teacher's Note: Spinel type is AB2O4 with oxide ccp.
Exam Note: Recall the AB2O4 formula type.
Question TS1.42. Which of the following atomic orbitals does not have the four lobes lying symmetrically between the axial directions?
(a) 3dxy (b) 3dxz (c) 3dyz (d) 3dx²-y²
Solution. Answer (from key): (d). The dx²-y² orbital has its four lobes along the x and y axes; the other three have lobes between the axes.
Teacher's Note: Only dx2-y2 (and dz2) point along axes.
Exam Note: Recall lobe directions.
Question TS1.43. The degree of dissociation (α) of a weak electrolyte AxBy is related to van't Hoff factor 'i' by the expression:
(a) α = (i - 1)/(x + y - 1) (b) α = (i - 1)/(x + y + 1) (c) α = (x + y - 1)/(i - 1) (d) α = (x + y + 1)/(i - 1)
Solution. Answer (from key): (a). i = 1 + α(x + y - 1), so α = (i - 1)/(x + y - 1).
Teacher's Note: Each formula unit gives x + y ions.
Exam Note: Write i = 1 + α(n-1).
Question TS1.44. The solubility of mercurous chloride in water will be given as:
(a) S = Ksp (b) S = Ksp/4 (c) S = (Ksp/4)1/2 (d) S = (Ksp/4)1/3
Solution. Answer (from key): (d). Hg2Cl2 ⇌ Hg22+ + 2Cl-; Ksp = S(2S)2 = 4S3, so S = (Ksp/4)1/3.
Teacher's Note: Mercurous ion is Hg2 2+, not Hg+.
Exam Note: Write Ksp = 4S^3.
Question TS1.45. The activation energies of two reactions are Ea1 and Ea2. If the temperature of the reacting systems is increased from T1 to T2, predict which of the following alternatives is correct? (k1', k2' are rate constants at the higher temperature.)
(a) k1'/k1 = k2'/k2 (b) k1'/k1 > k2'/k2 (c) k1'/k1 < k2'/k2 (d) k1'/k1 < 2k2'/k2
Solution. Answer (from key): (b), taking Ea1 > Ea2 as the hint states. log(k'/k) = (Ea/2.303R)(1/T1 - 1/T2), so the reaction with higher Ea shows the larger relative rise.
Teacher's Note: Higher activation energy means greater temperature sensitivity.
Exam Note: Apply Arrhenius ratio form.
Question TS1.46. In a cubic unit cell, seven of the eight corners are occupied by atoms 'A' and centres of faces are occupied by atoms 'B'. The general formula of the compound is:
(a) A7B6 (b) A7B12 (c) A7B24 (d) A24B7
Solution. Answer (from key): (c). A = 7 × 1/8 = 7/8; B = 6 × 1/2 = 3; ratio A : B = 7/8 : 3 = 7 : 24, so A7B24.
Teacher's Note: A corner atom counts 1/8, a face atom 1/2.
Exam Note: Count atoms per cell.
Question TS1.47. The rate law of a reaction of 'A' and 'B', rate = k[A]n[B]m, may be determined by plotting t1/2 versus [A]0 (plot 1) and rate versus time for 'B' (plot 2). In both plots the line is horizontal. The rate law superscripts 'n' and 'm' are:
(a) 0, 0 (b) 0, 1 (c) 1, 0 (d) 1, 1
Solution. Answer (from key): (c). A horizontal t1/2 against [A]0 plot means half life independent of concentration: n = 1; a constant rate for B means m = 0.
Teacher's Note: Constant half life implies first order; constant rate implies zero order.
Exam Note: Read each plot separately.
Question TS1.48. For 1s-orbital of hydrogen, the radial electron probability has a maximum value at:
(a) 0.1 Å (b) 0.40 Å (c) 0.53 Å (d) 2.1 Å
Solution. Answer (from key): (c). The most probable radius of the 1s electron is the Bohr radius, 0.529 Å.
Teacher's Note: Bohr radius a0 = 0.529 Å.
Exam Note: Quote the Bohr radius.
Question TS1.49. Which of the following expressions correctly represents the relationship between average kinetic energy of CO and N2 molecules at the same temperature?
(a) ECO > EN2 (b) ECO < EN2 (c) ECO = EN2 (d) Cannot be predicted unless volumes of the gases are given
Solution. Answer (from key): (c). Average translational kinetic energy is (3/2)kT and depends only on temperature.
Teacher's Note: KE depends on T only, not on the gas.
Exam Note: Write KE = 3/2 kT.
Question TS1.50. On the basis of Hardy-Schulze rule, which of the following sequences represents the coagulating power of cations?
(a) Ba2+ > Al3+ > Na+ (b) Ba2+ > Na+ > Al3+ (c) Al3+ > Na+ > Ba2+ (d) Al3+ > Ba2+ > Na+
Solution. Answer (from key): (d). Coagulating power rises with the valency of the oppositely charged ion.
Teacher's Note: Higher valency of the counter-ion means stronger coagulation.
Exam Note: Order by ionic charge.
Question TS1.51. Adiabatic expansion of an ideal gas is accompanied by:
(a) increase in temperature (b) decrease in ΔS (c) decrease in ΔE (d) no change in any one of the above properties
Solution. Answer (from key): (c). With q = 0 the gas does work at the expense of internal energy, so ΔE falls and the temperature drops.
Teacher's Note: Adiabatic work comes from internal energy: ΔE = w.
Exam Note: Set q = 0.
Question TS1.52. For a cyclic process, which of the following is not true?
(a) W = 0 (b) ΔE = 0 (c) ΔH = 0 (d) ΔG = 0
Solution. Corrected: (a). In a cyclic process the state functions ΔE, ΔH and ΔG are all zero, but work is not zero in general (q = -w). The printed key gives (d), which is a true statement.
Teacher's Note: State functions return to initial values over a cycle; work does not.
Exam Note: Separate state functions from path functions.
Question TS1.53. Radius of nucleus is related to the mass number 'A' by:
(a) R = R0A1/2 (b) R = R0A (c) R = R0A2 (d) R = R0A1/3
Solution. Answer (from key): (d). Nuclear volume is proportional to A, so R ∝ A1/3.
Teacher's Note: Nuclear density is constant, so volume is proportional to A.
Exam Note: State R = R0 A^(1/3).
Question TS1.54. A catalyst:
(a) increases the average kinetic energy of molecules (b) increases the activation energy (c) alters the reaction mechanism (d) increases the frequency of collisions of reacting species
Solution. Answer (from key): (c). A catalyst provides a new path (intermediate) of different activation energy.
Teacher's Note: Catalysts change the pathway, not temperature or collision rate.
Exam Note: Say new pathway with lower Ea.
Question TS1.55. A chemist wishes to prepare a buffer solution of pH = 3.85 that efficiently resists changes in pH yet contains only small concentration of the buffering agents. Which one of the following weak acids together with its sodium salt would be best to use?
(a) m-chlorobenzoic acid (pKa = 3.98) (b) p-chlorocinnamic acid (pKa = 4.41) (c) 2,5-hydroxybenzoic acid (pKa = 2.97) (d) Aceto-acetic acid (pKa = 3.58)
Solution. Answer (from key): (a). The best buffer has pKa closest to the required pH; 3.98 is 0.13 from 3.85, against 0.27 for aceto-acetic acid.
Teacher's Note: Choose the acid with pKa nearest the target pH.
Exam Note: Compare the pH-pKa gap for each.
Question TS1.56. For coordination number 4, the geometry that is not possible is:
(a) trigonal planar (b) tetrahedral (c) irregular tetrahedral (d) trigonal pyramidal
Solution. Answer (from key): (a). Trigonal planar has three ligands (coordination number 3); square planar and tetrahedral are the usual four-coordinate geometries.
Teacher's Note: Trigonal planar corresponds to coordination number 3.
Exam Note: Match geometry to ligand count.
Question TS1.57. The rate constant, the activation energy and the Arrhenius parameter of a chemical reaction at 25°C are 3 × 10-4 sec-1, 104.4 kJ mol-1 and 6 × 1014 sec-1 respectively. The value of rate constant as T → ∞ is:
(a) 2 × 1018 s-1 (b) 6 × 1014 s-1 (c) infinity (d) 3.6 × 1030 s-1
Solution. Answer (from key): (b). As T → ∞, e-Ea/RT → 1, so k → A = 6 × 1014 s-1.
Teacher's Note: At infinite temperature k equals the pre-exponential factor.
Exam Note: Apply the Arrhenius limit.
Question TS1.58. Emission of one 'α' and two 'β' particles successively from an element forms:
(a) isotope of parent element (b) isobar of parent element (c) isotone of parent element (d) isomer of parent element
Solution. Answer (from key): (a). α loses 2 protons; two β add 2 protons, so Z is unchanged while mass number falls by 4: an isotope.
Teacher's Note: Net Z change is -2 + 2 = 0.
Exam Note: Track Z and A separately.
Question TS1.59. Fraction of the total volume occupied by atoms in a simple cube is:
(a) π/2 (b) √3π/8 (c) √2π/6 (d) π/6
Solution. Answer (from key): (d). With r = a/2, packing fraction = (4/3)π(a/2)3/a3 = π/6 ≈ 0.52.
Teacher's Note: Simple cubic: atoms touch along the edge, r = a/2.
Exam Note: Use r = a/2.
Question TS1.60. Which of the following statements is wrong?
(a) Crystalline solids are optically anisotropic (b) Glass is amorphous solid (c) There are 14 Bravais lattices (d) There are only 10 crystal symmetries
Solution. Answer (from key): (d). There are 7 crystal systems and 14 Bravais lattices; 32 point-group symmetry classes, not 10.
Teacher's Note: Know 7 systems, 14 lattices, 32 point groups.
Exam Note: Quote the crystallographic counts.
Question TS1.61. Which of the following pairs is correctly matched? (Experimental observation - Phenomenon)
(a) X-ray spectra - Charge on the nucleus (b) α-particle scattering - Quantized electron orbit (c) Emission spectra - Quantization of energy (d) The photoelectric effect - The nuclear atom
Solution. Answer (from key): (c). Line emission spectra show that atomic energy levels are quantised. (Moseley's X-ray work gives nuclear charge, but the pairing in (a) is not accepted by the key.)
Teacher's Note: Discrete emission lines reveal discrete energy levels.
Exam Note: Pair each experiment with what it proves.
Question TS1.62. Arrangement of the following group of orbitals in which they fill with electrons: (5f, 6p, 4p, 6s, 4d, 4f)
(a) 4p, 4d, 6s, 4f, 6p, 5f (b) 6s, 4d, 4f, 5f, 4p, 6p (c) 6s, 4p, 4d, 4f, 5f, 6p (d) 4d, 4p, 4f, 5f, 6s, 6p
Solution. Answer (from key): (a). (n + l) values: 4p = 5, 4d = 6, 6s = 6, 4f = 7, 6p = 7, 5f = 8; equal values are ordered by lower n.
Teacher's Note: Rank by n + l, then lower n.
Exam Note: Tabulate n + l.
Question TS1.63. π0 meson is exchanged between:
(a) proton and neutron (b) proton and proton (c) neutron and neutron (d) may be between two protons or two neutrons
Solution. Answer (from key): (d).
Teacher's Note: Neutral pions carry the force between like nucleons.
Exam Note: Recall pion exchange picture.
Question TS1.64. If nucleons in an excited state fall to a lower energy level, energy is emitted as:
(a) α-rays (b) β-rays (c) γ-rays (d) X-rays
Solution. Answer (from key): (c). Nuclear de-excitation gives γ-rays.
Teacher's Note: γ-rays come from nuclear energy level transitions.
Exam Note: Contrast with X-rays from electron shells.
Question TS1.65. Minimum amount of energy required to remove a proton is approximately:
(a) 2 MeV (b) 4 MeV (c) 6 MeV (d) 8 MeV
Solution. Answer (from key): (a). Taken as printed in the key; this should be checked by a human.
Teacher's Note: Proton separation energies are several MeV.
Exam Note: State the key value as printed.
Question TS1.66. Mark the incorrect statement:
(a) Semiconductors are basically insulator (b) In metal crystal conduction occurs because molecular orbitals extend over the whole crystal and there is no energy gap between filled and unfilled molecular orbital (c) Mobile electrons account for high thermal and electrical conduction of metals (d) When a metal is heated with a non-metal, the resulting compound is never an ionic compound
Solution. Answer (from key): (d). For example sodium heated with chlorine gives ionic NaCl.
Teacher's Note: One counter-example refutes "never".
Exam Note: Give Na + Cl2 as a counter-example.
Question TS1.67. Given: (i) NH3(g) + 3Cl2(g) → NCl3(g) + 3HCl(g); ΔH1; (ii) N2(g) + 3H2(g) → 2NH3(g); ΔH2; (iii) H2(g) + Cl2(g) → 2HCl(g); ΔH3. Express the enthalpy of formation of NCl3(g) (ΔHf) in terms of ΔH1, ΔH2 and ΔH3:
(a) ΔHf = ΔH1 - ΔH2/2 + ΔH3/2 (b) ΔHf = ΔH1 + (1/2)ΔH2 - (3/2)ΔH3 (c) ΔHf = ΔH1 - (1/2)ΔH2 - (3/2)ΔH3 (d) ΔHf = ΔH1 + (1/2)ΔH2 + (3/2)ΔH3
Solution. Answer (from key): (b). Target: ½N2 + (3/2)Cl2 → NCl3. Add (i), ½ of (ii) (to form NH3), and subtract 3/2 of (iii) (to remove 3HCl): ΔHf = ΔH1 + ½ΔH2 - (3/2)ΔH3.
Teacher's Note: Hess's law: scale and add the given equations to reach the target.
Exam Note: Scale (ii) by 1/2 and (iii) by 3/2.
Question TS1.68. A spontaneous process may be defined as:
(a) a process which is exothermic and evolves a lot of heat (b) a process which is slow and reversible (c) a process which takes place only in presence of a catalyst (d) a process that occurs without any input from the surroundings
Solution. Answer (from key): (d). Spontaneity means the process proceeds on its own, regardless of rate or heat evolved.
Teacher's Note: Spontaneous does not mean fast or exothermic.
Exam Note: Define spontaneity without rate.
Question TS1.69. In the sequence of reaction L →(k1) M →(k2) N →(k3) O, with k3 > k2 > k1, the rate determining step of the reaction is:
(a) L → M (b) M → N (c) N → O (d) L → O
Solution. Answer (from key): (a). The step with the smallest rate constant, k1, is the slowest and rate-determining.
Teacher's Note: The slowest step controls the overall rate.
Exam Note: Compare k values.
Question TS1.70. The plot of log V against log P at constant temperature for a fixed mass of gas is: (Four graphs with log P on the vertical axis against log V: (a) horizontal line; (b) straight line falling; (c) straight line rising; (d) falling curve.)
Solution. Answer (from key): (b). At constant T, PV = constant so log P + log V = constant: a straight line of slope -1.
Teacher's Note: Boyle's law becomes a straight line of slope -1 on log-log axes.
Exam Note: Take logs of PV = k.
Question TS1.71. When mercuric iodide is added to aqueous solution of KI:
(a) freezing point is raised (b) freezing point does not change (c) freezing point is lowered (d) boiling point does not change
Solution. Answer (from key): (a). HgI2 + 2KI → K2[HgI4]; the complex reduces the number of particles in solution, so the freezing point rises.
Teacher's Note: Complex formation lowers particle count (colligative effect).
Exam Note: Write the Nessler-type complex equation.
Question TS1.72. The van der Waals' constant 'b' for water vapour is 0.03 litre mol-1. The radius of water vapour molecule is:
(a) 1.448 cm (b) 1.448 Å (c) 1.448 pm (d) 1.448 nm
Solution. Answer (from key): (b). b = 4NA(4/3)πr3: r3 = 3 × 30 cm3/(16π × 6.022×1023) = 2.97×10-24 cm3, so r = 1.44×10-8 cm ≈ 1.44 Å.
Teacher's Note: b is four times the actual volume of one mole of molecules.
Exam Note: Convert 0.03 L to 30 cm3.
Question TS1.73. For a reaction A →(k1) B and A →(k2) C (parallel), the overall rate constant is related to individual rate constants by:
(a) k = k1 - k2 (b) k1/k2 (c) k1k2 (d) k1 + k2
Solution. Answer (from key): (d). Both paths consume A, so -d[A]/dt = (k1 + k2)[A].
Teacher's Note: Parallel paths add their rate constants.
Exam Note: Write the combined rate of A loss.
Question TS1.74. N2O5 decomposes to N2O4 and O2: N2O5 → N2O4 + ½O2. The pressure Pt at any stage is related to p0 and 'x', the fraction of dissociation, as:
(a) p0 (b) (1 + x/2)p0 (c) 1 - (3/2)p0 (d) (3/2)xp0
Solution. Answer (from key): (b). Pt = p0(1 - x) + p0x + p0x/2 = p0(1 + x/2).
Teacher's Note: Add partial pressures of N2O5, N2O4 and O2.
Exam Note: Tabulate pressures at t = 0 and t.
Section III: Multiple choice questions (For IIT, AIIMS and BHU Medical Entrance); two or more options may be correct
Question TS1.75. An ideal gas:
(a) has no intermolecular attraction (b) molecules do not collide with each other (c) the product of P and V is constant at a fixed temperature for definite mass (d) can be liquefied easily
Solution. Answer (from key): (a, c). Molecules do collide (elastically) and an ideal gas cannot be liquefied.
Teacher's Note: Ideal gas: no attraction, collisions still occur.
Exam Note: Check each statement against the model.
Question TS1.76. Extensive properties among the following is/are:
(a) refractive index (b) volume (c) density (d) mass
Solution. Answer (from key): (b, d). Volume and mass depend on the amount of matter; refractive index and density do not.
Teacher's Note: Extensive properties depend on amount of substance.
Exam Note: Test by halving the sample.
Question TS1.77. Which of the following statements regarding equilibrium is/are true?
(a) Equilibrium constant varies with temperature (b) Equilibrium constant varies with catalyst (c) The reaction stops when the equilibrium is reached (d) The equilibrium constant depends on the concentration of reactants
Solution. Corrected: (a) only. A catalyst changes rate but not K; at equilibrium the forward and backward rates are equal (dynamic equilibrium, not stopped); K does not depend on concentrations at fixed T. The printed key gives (a, b).
Teacher's Note: K depends only on temperature, not catalyst or concentration.
Exam Note: Say catalyst leaves K unchanged.
Question TS1.78. When mercuric iodide is added to aqueous KI solution:
(a) freezing point is raised (b) osmotic pressure is raised (c) boiling point is elevated (d) vapour pressure is raised
Solution. Answer (from key): (a, d). KI reacts with HgI2 to form Nessler's reagent: 2KI + HgI2 → K2[HgI4]. The number of particles falls, so freezing point and vapour pressure rise.
Teacher's Note: Fewer particles weaken every colligative effect.
Exam Note: Write 2KI + HgI2 → K2[HgI4].
Question TS1.79. The correct statements are:
(a) Smoke is carbon dispersed in air (b) Butter is water dispersed in fat (c) Greater is the valency of ion more will be its coagulating power (d) More is the gold number of a lyophobic sol, more is protecting power
Solution. Answer (from key): (a, b, c). (d) is false: a higher gold number means lower protecting power.
Teacher's Note: Gold number is inversely related to protective power.
Exam Note: Recall gold number meaning.
Question TS1.80. Select the correct statements among the following:
(a) Order can be zero. (b) Order cannot have fractional value. (c) Order is a theoretical quantity. (d) Order is equal to molecularity for decomposition of N2O5 giving N2O4 and O2.
Solution. Answer (from key): (a, d). Order can be zero or fractional and is experimental, not theoretical.
Teacher's Note: Order is found by experiment, molecularity by mechanism.
Exam Note: Contrast order and molecularity.
Question TS1.81. Rate law for a chemical reaction is: Rate = k[A]1/2[B]1. Choose the correct options among the following:
(a) Order of the reaction is 3/2. (b) Unit of its rate constant is litre1/2 mol-1/2 sec-1. (c) Unit of rate is mol litre-1 sec-1. (d) Its molecularity is always 3.
Solution. Answer (from key): (a, b, c). Order = 1/2 + 1 = 3/2; k has units (mol/L)1-3/2 s-1 = L1/2 mol-1/2 s-1; molecularity cannot be fractional-based or fixed at 3.
Teacher's Note: Units of k are (mol/L)^(1-n) per second.
Exam Note: Derive units from order 3/2.
Question TS1.82. Liquid benzene burns in oxygen according to: 2C6H6 + 15O2 → 12CO2 + 6H2O. If density of liquid benzene is 0.88 g/cc, what volume of O2 at STP is needed to complete the combustion of 39 cc of liquid benzene?
(a) 11.2 litre (b) 74 litre (c) 0.074 m3 (d) 37 dm3
Solution. Answer (from key): (b, c). Mass = 39 × 0.88 = 34.32 g; moles = 34.32/78 = 0.44; O2 = 0.44 × 15/2 = 3.3 mol; volume = 3.3 × 22.4 = 73.9 L ≈ 74 L = 0.074 m3.
Teacher's Note: Mass from density, moles from molar mass, then mole ratio 15/2.
Exam Note: Use C6H6 = 78 and 22.4 L/mol.
Question TS1.83. For the reaction N2H4(l) + 2H2O2(l) → N2(g) + 4H2O(g), heats of formation of N2H4, H2O2, H2O are 12, -45 and -57.8 kcal mol-1. Internal energy change for this reaction at 298 K is/are:
(a) -153.2 kcal mol-1 (b) -641.142 kJ mol-1 (c) -24.8 kcal mol-1 (d) -309 kcal mol-1
Solution. Answer (from key): (a, b). ΔH = 4(-57.8) - [12 + 2(-45)] = -153.2 kcal = -641.1 kJ. Note: these values are ΔH; strictly ΔU = ΔH - ΔngRT = -153.2 - 5 × 0.592 = -156.2 kcal, which matches none of the options; flagged for human check.
Teacher's Note: ΔH from formation enthalpies; ΔU needs the Δn(gas)RT correction.
Exam Note: Compute Δn(gas) = 5.
Question TS1.84. Which of the following electrolytes have same osmotic pressure as that of 0.1 M KCl?
(a) 0.1 M HCl (b) 0.1 M NaCl (c) 0.1 M CsCl (d) None of these
Solution. Answer (from key): (a, b, c). All are 1:1 strong electrolytes with van't Hoff factor 2, so the same osmotic pressure at equal molarity.
Teacher's Note: Equal molarity and equal i gives equal osmotic pressure.
Exam Note: Compare van't Hoff factors.
Question TS1.85. Select the correct statements about the following reaction: N2(g) + 3H2(g) ⇌ 2NH3(g); ΔH = -22.4 kcal mol-1
(a) Increase in pressure will favour forward reaction. (b) Addition of inert gas forms more NH3. (c) At low temperature, there is forward shift. (d) Catalyst will increase the amount of NH3.
Solution. Corrected: (a, c). Higher pressure favours fewer moles (forward); the reaction is exothermic so low temperature favours the forward direction. Inert gas at constant volume has no effect, and at constant pressure shifts the equilibrium backward, so (b) is false; a catalyst does not change the amount at equilibrium. The printed key gives (a, b, c).
Teacher's Note: Pressure favours fewer moles; exothermic favours cold; catalyst never shifts equilibrium.
Exam Note: Distinguish constant V from constant P.
Question TS1.86. Which among the following is/are correct about penetrating power?
(a) α-rays are less penetrating than β-rays. (b) β-rays are less penetrating than γ-rays. (c) α, β, γ rays have equal penetrating power. (d) γ-rays are most penetrating.
Solution. Answer (from key): (a, b, d). Penetrating power increases in the order α < β < γ.
Teacher's Note: Order: α < β < γ.
Exam Note: State the order of penetration.
Question TS1.87. Select the natural series among the following:
(a) (4n + 1) (b) (4n + 2) (c) 4n (d) (4n + 3)
Solution. Answer (from key): (b, c, d). The thorium (4n), uranium (4n + 2) and actinium (4n + 3) series are natural; the neptunium (4n + 1) series is artificial.
Teacher's Note: Neptunium series is not found in nature (short half-life).
Exam Note: Name the four series.
Question TS1.88. Select the correct conclusion(s) about average life:
(a) Average life = 1/λ (b) Average life = 1.44 × t1/2 (c) The time in which 63.2% element decays is called average life (d) None of the above
Solution. Answer (from key): (a, b, c). τ = 1/λ = t1/2/0.693 = 1.44 t1/2, and in time τ the fraction decayed is 1 - 1/e = 63.2%.
Teacher's Note: Average life is t1/2 divided by 0.693.
Exam Note: Quote τ = 1.44 t1/2.
Question TS1.89. Which of the following statements are correct?
(a) 1 faraday is the charge of 1 mole electron. (b) 1 faraday is used to deposit 1 g equivalent of a substance. (c) 5.6 litre O2 will be evolved at STP by 1 faraday charge. (d) 11.2 litre Cl2 will be evolved at STP by 1 faraday charge.
Solution. Answer (from key): (a, b, c, d). 1 F = 96500 C = charge on 1 mol e-, depositing 1 equivalent; 1 equivalent of O2 = 5.6 L and of Cl2 = 11.2 L at STP.
Teacher's Note: One faraday liberates one gram equivalent of any substance.
Exam Note: Use equivalent volumes: 5.6 L O2, 11.2 L Cl2.
Question TS1.90. Select the species having zero oxidation state at the underlined elements:
(a) (CH3)2SO (b) C12H22O11 (c) H2S2O3 (d) N2H4 (the underlined elements are not legible in the scan)
Solution. Answer (from key): (a, b). The underlining is not legible in the scan, so the key is reproduced as printed and flagged for human check.
Teacher's Note: Compute the oxidation state of the underlined atom with the sum rule.
Exam Note: Use the zero-sum rule.
Question TS1.91. PCl5(g) ⇌ PCl3(g) + Cl2(g). 'α' is the degree of dissociation of PCl5 at equilibrium pressure 'P'. Which among the following is the correct expression for degree of dissociation of 'α'?
(a) α = √(Kp/(P + Kp)) (b) α = √((P + Kp)/Kp) (c) α = √(KpP) (d) α = √(P/Kp)
Solution. Answer (from key): (a). Kp = α2P/(1 - α2), so α2(P + Kp) = Kp and α = √(Kp/(P + Kp)).
Teacher's Note: Write partial pressures in terms of α and total P.
Exam Note: Derive Kp = α²P/(1-α²).
Question TS1.92. In Wilson Cloud Chamber, the track is formed by:
(a) α-rays (b) β-rays (c) γ-rays (d) all of these
Solution. Answer (from key): (a, b). Ionising α and β particles leave visible tracks of condensed droplets; γ-rays ionise only weakly and leave no clear track.
Teacher's Note: Dense ionisation along the path seeds droplets.
Exam Note: Link tracks to ionising power.
Question TS1.93. Select the correct relation:
(a) N0 = N · 10λt/2.303 (b) N0 = Neλt (c) N0 = N λ/102.303t (d) N = N0e-λt
Solution. Answer (from key): (a, b, d). N = N0e-λt gives N0 = Neλt = N·10λt/2.303; (c) is dimensionally meaningless.
Teacher's Note: Decay law rearranged and converted to base 10.
Exam Note: Start from N = N0 e^(-λt).
Question TS1.94. For the first order reaction, t99% = x × t90%, the value of 'x' will be:
(a) 10 (b) 6 (c) 3 (d) 2
Solution. Answer (from key): (d). t = (2.303/k) log(100/(100 - p)): t99% ∝ log 100 = 2 and t90% ∝ log 10 = 1, so x = 2.
Teacher's Note: First-order time scales with log of 1/(fraction remaining).
Exam Note: Take log(100)/log(10).
Question TS1.95. Which among the following has same kinetic energy as O2 gas at NTP?
(a) H2 (b) N2 (c) CO2 (d) None of these
Solution. Answer (from key): (a, b, c). Average kinetic energy depends only on temperature; at the same temperature all these gases have the same molar kinetic energy. (The key's last characters are partly illegible; solved independently.)
Teacher's Note: KE = 3/2 RT per mole, independent of the gas.
Exam Note: Use temperature-only dependence.
Question TS1.96. Which among the following is correct about γ-rays?
(a) High energy electrons (b) Low energy electrons (c) High energy electromagnetic waves (d) High energy positrons
Solution. Answer: (c). The printed key is partly illegible; solved independently: γ-rays are high-energy electromagnetic radiation with no charge or mass.
Teacher's Note: γ-rays are photons from nuclear transitions.
Exam Note: Say they are uncharged photons.
Question TS1.97. The RMS speed at NTP of a gas can be calculated from the expression:
(a) √(3P/d) (b) √(3PV/M) (c) √(3RT/M) (d) √(3d/P)
Solution. Answer (from key): (a, b, c). urms = √(3RT/M) = √(3PV/M) = √(3P/d), using PV = RT per mole and d = M/V.
Teacher's Note: Use PV = RT and d = M/V to switch forms.
Exam Note: Show one conversion step.
Question TS1.98. The graph representing Boyle's law is/are: (Four graphs: (a) pressure on the vertical axis against volume... a falling hyperbola of P against V? labelled as plot of V against P; (b) a straight line falling for log P against log V; (c) a straight falling line of V against P; (d) a horizontal line of PV against P.)
Solution. Answer (from key): (a, b, d). Boyle's law gives a rectangular hyperbola of V against P, a straight line of slope -1 on log-log axes and a horizontal line for PV against P; a straight falling line of V against P is not Boyle's law.
Teacher's Note: PV = constant: hyperbola, log-log line, flat PV line.
Exam Note: Check each plot against PV = k.
Question TS1.99. For diatomic molecules, the correct relation is/are:
(a) CP = (7/2)R (b) CV = (5/2)R (c) γ = 1.4 (d) CP = (3/2)R
Solution. Answer (from key): (a, b, c). A rigid diatomic gas has CV = 5R/2, CP = 7R/2, γ = 7/5 = 1.4.
Teacher's Note: Five degrees of freedom: Cv = 5R/2.
Exam Note: Add R to Cv to get Cp.
Question TS1.100. Which of the following aqueous solutions produce the same osmotic pressure?
(a) 0.1 M NaCl solution (b) 0.1 M glucose solution (c) 0.6 g urea in 100 mL solution (d) 1.0 g of a non-electrolyte solute in 50 mL solution (Molar mass = 200)
Solution. Answer (from key): (b, c, d). Glucose is 0.1 M; urea is 0.6/60 = 0.01 mol in 0.1 L = 0.1 M; the solute in (d) is (1/200)/0.05 = 0.1 M, all non-electrolytes. NaCl (i = 2) gives double the osmotic pressure.
Teacher's Note: Osmotic pressure follows i × molarity.
Exam Note: Convert each solution to molarity.
IIT Entrance Test Papers: Test Series II (Graphical Aptitude)
Question TS2.1. A sample of 2 kg of helium (assumed ideal) is taken through the process ABC and another sample of 2 kg of the same gas is taken through the process ADC. Then the temperature of the states A and B are: (Given, R = 8.3 joules/mol K) (Figure: P-V diagram, P in 104 N/m2, V in m3. A = (V 10, P 5), B = (10, 10), C = (20, 10), D = (20, 5); a rectangle ABCD.)
(a) TA = 120.5 K, TB = 120.5 K (b) TA = 241 K, TB = 241 K (c) TA = 120.5 K, TB = 241 K (d) TA = 241 K, TB = 482 K
Solution. Answer (from key): (c). n = 2000/4 = 500 mol. TA = PV/nR = (5×104 × 10)/(500 × 8.3) = 120.5 K; at B the pressure doubles at the same volume, so TB = 241 K.
Teacher's Note: Use PV = nRT with n = mass/molar mass = 500 mol.
Exam Note: Convert 2 kg He to 500 mol.
Question TS2.2. An ideal diatomic gas is caused to pass through a cycle shown on the P-V diagram in figure, where V2 = 3.00 V1. If P1, V1 and T1 specify the state 1, then the temperature of the state 3 is: (Figure: state 1 at upper left; isothermal curve to state 2 at larger volume; isochoric fall to state 3 at volume V2; adiabatic curve from 3 back to 1.)
(a) (T1/3)1.4 (b) T1/31.4 (c) T1/30.4 (d) cannot be determined
Solution. Answer (from key): (c). For the adiabat 3 → 1: T3V2γ-1 = T1V1γ-1 with γ = 1.4, so T3 = T1(V1/V2)0.4 = T1/30.4.
Teacher's Note: Adiabatic relation TV^(γ-1) = constant with γ = 7/5.
Exam Note: Use γ = 1.4 for a diatomic gas.
Question TS2.3. A heat engine carries one mole of an ideal monoatomic gas around the cycle as shown in the figure. Process 1 → 2 takes place at constant volume, process 2 → 3 is adiabatic and process 3 → 1 takes place at constant pressure. Then the amount of heat added in the process 1 → 2 is: (Figure: P-V; T1 = 300 K, T2 = 600 K, T3 = 455 K.)
(a) 3740 J (b) -3740 J (c) 1810 J (d) 3220 J
Solution. Answer (from key): (a). At constant volume Q = nCVΔT = 1 × (3/2)(8.31)(600 - 300) ≈ 3740 J.
Teacher's Note: Heat at constant volume equals nCvΔT.
Exam Note: Use Cv = 3R/2 for monoatomic gas.
Question TS2.4. One mole of an ideal monoatomic gas is caused to go through the cycle shown in figure. Then the change in the internal energy in expanding the gas from a to c along the path abc is: (Figure: P-V diagram; a = (V0, P0) at temperature T0; b = (4V0, P0); c = (4V0, 2P0).)
(a) 3P0V0 (b) 6RT0 (c) 4.5RT0 (d) 10.5RT0
Solution. Answer (from key): (d). Tc = (2P0)(4V0)/R = 8T0, so ΔT = 7T0 and ΔU = (3/2)R(7T0) = 10.5RT0.
Teacher's Note: Internal energy depends only on the end states.
Exam Note: Find T at c from PV = RT.
Question TS2.5. A thermodynamic system consists of a cylinder-piston arrangement with ideal gas in it. It goes from the state i to the state f as shown in the figure (a straight line through the origin on a pressure-temperature diagram). The work done by the gas during the process:
(a) is zero (b) is negative (c) is positive (d) nothing can be predicted
Solution. Answer (from key): (a). A straight line through the origin on a P-T plot means P ∝ T, so the volume is constant and W = 0.
Teacher's Note: P ∝ T at constant volume gives zero work.
Exam Note: Recognise isochoric from P-T line.
Question TS2.6. A cyclic process ABCA is shown in a V-T diagram. The corresponding P-V diagram is: (Figure: V-T diagram: A lower, on a straight line through the origin to B (upper right); B to C horizontal to the left; C to A vertically down. Four P-V options (a) to (d) are drawn.)
Solution. Answer (from key): (a). A → B lies on a line through the origin (V ∝ T): isobaric expansion; B → C is at constant V with T falling: pressure falls; C → A is at constant T with V decreasing: isothermal compression. The P-V diagram is therefore a horizontal line A → B, a vertical drop B → C, and a hyperbola back from C to A, as in (a).
Teacher's Note: Classify each leg: line through origin is isobaric.
Exam Note: Classify each leg of the cycle.
Question TS2.7. The following are the P-V diagrams for cyclic processes for a gas. In which of these processes heat is not absorbed by the gas? (Figures: (a) a circle traversed clockwise on P-V axes; (b) a circle on V-P axes; (c) a closed loop with arrows; (d) a triangle on V-P axes.)
Solution. Answer (from key): (d). The cycle in (d), as drawn, is traversed so that the net work is done on the gas, meaning heat is released, not absorbed. This depends on the arrow directions in the figure and is flagged for a human check.
Teacher's Note: Net heat absorbed over a cycle equals net work done by the gas.
Exam Note: Check loop direction: clockwise on P-V means heat absorbed.
Question TS2.8. The graph between P and V at constant temperature should look like: (Four graphs of P (vertical) against V (horizontal): (a) a straight line rising from the origin; (b) a straight line falling; (c) a hyperbola falling steeply then flattening near the V-axis; (d) a curve rising towards a vertical asymptote.)
Solution. Corrected: (c). At constant temperature PV = constant, a rectangular hyperbola. The printed key gives (a), which is a straight line and does not match Boyle's law.
Teacher's Note: Boyle's law at constant T gives a rectangular hyperbola.
Exam Note: Say PV = constant.
Question TS2.9. In the P-V diagram shown below: (Figure: A is above B on a vertical line; from B a horizontal line goes to C, and two falling curves go to D and E, the lower one steeper.)
(a) AB represents adiabatic process (b) AB represents isothermal process (c) AB represents isobaric process (d) AB represents isochoric process
Solution. Corrected: (d). AB is vertical on a P-V diagram, so the volume is constant: isochoric. (BC is isobaric; BD is isothermal; BE is adiabatic.) The printed key gives (c).
Teacher's Note: A vertical line on P-V means constant volume.
Exam Note: Identify a vertical line as isochoric.
Question TS2.10. The pressure-volume graph of an ideal gas cycle is shown below. The adiabatic process is described by: (Figure: A at upper left, B at right, C lower right, D lower left. A to B and D to C are shallow curves; A to D and B to C are steeper curves.)
(a) AB and BC (b) AB and CD (c) AD and BC (d) BC and CD
Solution. Corrected: (c). The steeper curves AD and BC are adiabats; the shallow curves AB and DC are isotherms. The printed key gives (d).
Teacher's Note: An adiabat is steeper than an isotherm on a P-V diagram.
Exam Note: Compare slopes: adiabat steeper.
Question TS2.11. An ideal gas is taken around the cycle ABCA shown in P-V diagram. The net work done by the gas during the cycle is equal to: (Figure: A = (V1, P1), B = (V1, 4P1), C = (3V1, P1); a right-angled triangle.)
(a) 12P1V1 (b) 6P1V1 (c) 3P1V1 (d) P1V1
Solution. Answer (from key): (c). Work = area of the triangle = (1/2)(3P1)(2V1) = 3P1V1.
Teacher's Note: Net work in a cycle equals the enclosed area.
Exam Note: Use half base times height.
Question TS2.12. An ideal monoatomic gas is taken round the cycle ABCDA as shown in figure. The work done during cycle is: (Figure: rectangle with corners A (V, P), B (V, 2P), C (2V, 2P), D (2V, P).)
(a) PV (b) 2PV (c) (1/2)PV (d) zero
Solution. Corrected: (a) PV. The rectangle has pressure side 2P - P = P and volume side 2V - V = V, so the enclosed area (net work) is PV. The printed key gives (c).
Teacher's Note: Cycle work is the rectangle's area, ΔP × ΔV.
Exam Note: Multiply sides: (2P-P)(2V-V).
Question TS2.13. Four curves A, B, C and D are drawn in figure for a given amount of gas. The curve which represents adiabatic and isothermal changes are: (Figure: P-V; A and B are a lower pair of curves from a common region sloping down to the right; C and D mirror them on the right.)
(a) C and D respectively (b) D and C respectively (c) A and B respectively (d) B and A respectively
Solution. Answer (from key): (c). A is the adiabatic curve and B the isothermal curve (the adiabat is steeper). The orientation depends on the figure and is flagged for human check.
Teacher's Note: The adiabatic curve is steeper than the isothermal through the same point.
Exam Note: Compare steepness.
Question TS2.14. A given mass of gas expands from the state A to the state B by three paths 1, 2 and 3 as shown in the figure. If W1, W2 and W3 respectively be the work done by the gas along the three paths then: (Figure: three curves from A (upper left) to B (lower right); curve 1 lowest, 2 straight in the middle, 3 highest.)
(a) W1 > W2 > W3 (b) W1 < W2 < W3 (c) W1 = W2 = W3 (d) W1 < W2; W1 < W3
Solution. Answer (from key): (b). Work is the area under each path; path 3 lies highest and encloses the largest area, path 1 the least.
Teacher's Note: Work done by gas is the area under the P-V curve.
Exam Note: Compare areas under each path.
Question TS2.15. A thermodynamic process is shown in the following figure. The pressure and volumes corresponding to some points in the figure are: PA = 3 × 104 Pa, VA = 2 × 10-3 m3; PB = 8 × 104 Pa, VD = 5 × 10-3 m3. (Figure: A at bottom left, B above A, C right of B, D below C; AC is the diagonal.) In process AB, 600 J of heat is added to the system and in process BC, 200 J of heat is added to the system. The change in internal energy of the system in the process AC would be:
(a) 560 J (b) 800 J (c) 600 J (d) 640 J
Solution. Corrected: (a) 560 J. AB is isochoric, so ΔUAB = 600 J. BC is isobaric: W = PB(VD - VA) = 8×104 × 3×10-3 = 240 J, so ΔUBC = 200 - 240 = -40 J. ΔU is a state function, so ΔUAC = 600 - 40 = 560 J. The printed key gives (b).
Teacher's Note: Internal energy is a state function: add ΔU along AB and BC.
Exam Note: Compute W for BC as PΔV.
Question TS2.16. In the pressure-volume diagram given below, the isochoric, isothermal, isobaric and isentropic parts respectively are: (Figure: A upper left, B upper right (horizontal AB), C lower right, D lower left (vertical-like DC and curved paths).)
(a) BA, AD, DC, CB (b) DC, CB, BA, AD (c) AB, BC, CD, DA (d) CD, DA, AB, BC
Solution. Answer (from key): (d). CD isochoric, DA isothermal, AB isobaric, BC isentropic, according to the key.
Teacher's Note: Match horizontal line to isobaric, vertical to isochoric.
Exam Note: Read each leg's shape.
Question TS2.17. Heat energy absorbed by a system in going through a cyclic process shown in figure is: (Figure: a circle on a P-V diagram with P in kPa from 10 to 30 and V in litres from 10 to 30; the circle has radius 10 units on each axis.)
(a) 107π J (b) 104π J (c) 102π J (d) 10-3π J
Solution. Answer (from key): (c). Heat absorbed = work = enclosed area = π × (10 kPa)(10 L) = π × (104 Pa)(10-2 m3) = 100π J.
Teacher's Note: Net heat equals net work equals the enclosed area.
Exam Note: Convert kPa and litre to SI units.
Question TS2.18. The pressure-temperature (P-T) phase diagram shown below corresponds to the: (Figure: a boundary between solid and liquid phases sloping backward, with solid below-left and liquid above-right of the line, ending at a vapour curve.)
(a) Curve of fusion of solids that expand on solidification (b) Curve of sublimation of solids that directly go over to the vapour phase (c) Curve of fusion of solids that contract on solidification (d) Curve of fusion of solids that do not change in volume upon solidification
Solution. Answer (from key): (a). The fusion curve slopes backward (melting point falls as pressure rises) for substances like water that expand on freezing.
Teacher's Note: By Clapeyron, dP/dT = ΔH/(TΔV) is negative when ΔV(fusion) is negative.
Exam Note: Link slope sign to volume change on melting.
Question TS2.19. Graph of specific heat at constant volume for a monoatomic gas is: (Four graphs of CV against T: (a) a rising curve that flattens; (b) a horizontal line at 3R; (c) a horizontal line at 3R/2; (d) a falling curve.)
Solution. Answer (from key): (c). For a monoatomic ideal gas CV = 3R/2, independent of temperature.
Teacher's Note: Three translational degrees of freedom: Cv = 3R/2.
Exam Note: Quote Cv = 3R/2.
Question TS2.20. A cyclic process ABCD is shown in the P-V diagram (A to B horizontal, B to C steeply down, C to D vertical, D back to A steeply up). Which of the following curves represents the same process? (Four diagrams on V-T and P-T axes.)
Solution. Answer (from key): (c). The key selects diagram (c); the matching depends on the figures, which is flagged for a human check.
Teacher's Note: Convert each leg of the cycle into its V-T or P-T form.
Exam Note: Identify isobaric, isochoric, adiabatic legs.
Question TS2.21. A system is taken from state A to B through three different paths 1, 2 and 3. The work done is maximum in: (Figure: P-V; A at (Vi, Pi), B at (Vf, Pf); path 1 goes up first and then across at Pf; path 2 is the straight diagonal; path 3 goes across at Pi and then up.)
(a) process 1 (b) process 2 (c) process 3 (d) equal in all processes
Solution. Corrected: (a) process 1. Work is the area under the path: path 1 (expansion at Pf) gives Pf(Vf - Vi), the largest; path 3 gives Pi(Vf - Vi), the least. Work is a path function, so (d) is wrong. The printed key gives (d).
Teacher's Note: Work depends on path; larger pressure during expansion gives more work.
Exam Note: Compare area under each path.
Question TS2.22. In the cyclic process shown on P-V diagram, the magnitude of the work done is: (Figure: a circle with P between P1 and P2 on the horizontal axis and V between V1 and V2 on the vertical axis.)
(a) π((P2 - P1)/2)2 (b) π((V2 - V1)/2)2 (c) (π/4)(P2 - P1)(V2 - V1) (d) π(P2V2 = P1V1)
Solution. Corrected: (c). The enclosed region has semi-axes (P2 - P1)/2 and (V2 - V1)/2 on axes with different units, so its area is π × (ΔP/2)(ΔV/2) = (π/4)ΔPΔV. Options (a) and (b) mix units. The printed key gives (b).
Teacher's Note: Work equals enclosed area: π times the two semi-axes.
Exam Note: Multiply the two semi-axes, not square one.
Question TS2.23. A cyclic process is shown in the P-T diagram (A to B along a line through the origin, B to C vertically down, C to A horizontally to the left). Which of the curves shows the same process on a V-T diagram? (Four V-T diagrams (a) to (d).)
Solution. Answer (from key): (c). A → B on a line through the origin of P-T is isochoric (horizontal on V-T); B → C is at constant T with P falling, so V rises (vertical up); C → A is isobaric with T falling, so V falls along a line through the origin. This gives the diagram (c): A lower left, B lower right, C above B.
Teacher's Note: P-T line through origin means constant V.
Exam Note: Map each leg: isochoric, isothermal, isobaric.
Question TS2.24. Heat is supplied to a certain homogeneous sample of matter, at a uniform rate. Its temperature is plotted against time, as shown. Which of the following conclusions can be drawn? (Figure: temperature against time: a rising segment, a short flat segment, a second rising segment, and then a longer flat segment.)
(a) Its specific heat capacity is greater in the solid state than in the liquid state. (b) Its specific heat capacity is smaller in the solid state than in the liquid state. (c) Its latent heat of vaporization is greater than its latent heat of fusion. (d) Its latent heat of vaporization is smaller than its latent heat of fusion.
Solution. Answer (from key): (c). The second plateau (boiling) lasts longer than the first (melting) at a uniform heating rate, so Lvap > Lfusion.
Teacher's Note: At uniform heating rate, plateau length is proportional to latent heat.
Exam Note: Compare plateau lengths.
Question TS2.25. An ideal gas is taken from the state A (pressure P, volume V) to the state B (pressure P/2, volume 2V) along a straight line path in the P-V diagram. Select the wrong statement from the following:
(a) The work done by the gas in the process A to B exceeds the work that would be done by it if the system were taken from A to B along the isotherm (b) In the T-V diagram, the path AB becomes a part of parabola (c) In the P-V diagram, the path AB becomes a part of hyperbola (d) In going from A to B, the temperature T of the gas first increases to a maximum value and then decreases
Solution. Answer (from key): (c). On the P-V diagram the path is a straight line, not a hyperbola; the other statements are correct.
Teacher's Note: Straight line P = P0 - mV gives a parabola for T-V.
Exam Note: Test each statement against the straight-line path.
Question TS2.26. The radioactive nucleus of element X decays to a stable nucleus of element Y. A graph of the rate of formation of Y against time would look like: (Four graphs: (a) and (b) with vertical axis labelled Y-1-type symbol: (a) an arch, (b) a quarter-circle fall; (c) and (d) with vertical axis Y: (c) an arch, (d) a concave fall.)
Solution. Answer (from key): (c). The key's choice is reproduced; physically the rate of formation of Y equals λNX, falling exponentially, so the scanned axis labels and key should be checked by a human.
Teacher's Note: Rate of formation of Y equals the decay rate of X.
Exam Note: Link formation rate to λN.
Question TS2.27. In photoelectric effect the slope of straight line graph between stopping potential (V0) and frequency of incident light (ν) gives: (Figure: V0 against ν, a straight line cutting the ν axis at the threshold frequency.)
(a) charge on electron (b) work function of emitter (c) Planck's constant (d) ratio of Planck's constant to charge on electron
Solution. Answer (from key): (d). eV0 = hν - φ, so V0 = (h/e)ν - φ/e; the slope is h/e.
Teacher's Note: Rearrange Einstein's equation to V0 against ν.
Exam Note: Write V0 = (h/e)ν - φ/e.
Question TS2.28. The stopping potential as a function of frequency of incident radiation is plotted for two different photoelectric surfaces A and B. The graphs show that the work function of A is: (Figure: two parallel straight lines, A cutting the ν axis at a lower frequency than B.)
(a) greater than that of B (b) smaller than that of B (c) same as that of B (d) such that no comparison can be done from given graphs
Solution. Answer (from key): (b). The lines are parallel (same h/e); A's threshold frequency is smaller, so φ = hν0 is smaller for A.
Teacher's Note: Work function equals h times threshold frequency.
Exam Note: Compare intercepts on the frequency axis.
Question TS2.29. Which of the following is the graph between the frequency (ν) of the incident radiations and the stopping potential? (Four graphs of V0 against ν: (a) a curve rising steeply; (b) a concave curve; (c) a straight line rising and cutting the ν axis; (d) a falling straight line.)
Solution. Answer (from key): (c). V0 = (h/e)(ν - ν0) is a straight line of positive slope with intercept ν0.
Teacher's Note: The relation is linear above the threshold frequency.
Exam Note: Name the linear equation.
Question TS2.30. Which of the following figures represents the variations of particle momentum and associated de Broglie wavelength? (Four graphs of p against λ: (a) rising line; (b) rising curve; (c) falling line; (d) falling hyperbola.)
Solution. Answer (from key): (d). p = h/λ, so p against λ is a rectangular hyperbola.
Teacher's Note: p is inversely proportional to λ.
Exam Note: Use λ = h/p.
Question TS2.31. The given figure indicates the energy levels of a certain atom. When the system moves from 2E level to E, a photon of wavelength λ is emitted. The wavelength of photon produced during the transition from level 4E/3 to level E is: (Levels shown: 2E, 4E/3, E.)
(a) λ/3 (b) 3λ/4 (c) 4λ/3 (d) 3λ
Solution. Answer (from key): (d). 2E → E releases energy E (λ = hc/E); 4E/3 → E releases E/3, so wavelength = hc/(E/3) = 3λ.
Teacher's Note: Wavelength is inversely proportional to the energy gap.
Exam Note: Compare energy gaps: E and E/3.
Question TS2.32. The maximum kinetic energy (Ek) of the photoelectron varies with frequency (ν) of the incident light as shown by the curve: (Figure: curves A (curve with asymptote), B (steep curve), C (straight line cutting the ν axis), D (falling curve).)
(a) A (b) B (c) C (d) D
Solution. Answer (from key): (c). Ek = hν - φ is a straight line of slope h cutting the ν axis at the threshold frequency.
Teacher's Note: Einstein's equation gives a straight line against ν.
Exam Note: State Ek = hν - φ.
Question TS2.33. The following graphs illustrate: (Two graphs of V against temperature: the first against temperature in °C with the line cutting the axis at -273°C; the second against temperature in K, a line through the origin.)
(a) Dalton's law (b) Charles' law (c) Boyle's law (d) Gay-Lussac's law
Solution. Answer (from key): (b). V ∝ T at constant pressure, with V extrapolating to zero at -273°C.
Teacher's Note: Volume extrapolates to zero at absolute zero.
Exam Note: Name Charles' law.
Question TS2.34. In the following graph: (Figure: P-V curves: A a vertical line, B a steep falling curve, C a shallower falling curve, D a horizontal line.)
(a) 'A' represents isochoric process (b) 'B' represents adiabatic process (c) 'C' represents isothermal process (d) 'D' represents isobaric process
Solution. Answer (from key): (a, b, c, d). All four statements are correct: vertical A is isochoric, horizontal D isobaric, and the steeper curve B is the adiabat while C is the isotherm.
Teacher's Note: Vertical = isochoric, horizontal = isobaric, steeper curve = adiabat.
Exam Note: Verify all four lines.
Question TS2.35. The variation of Λm of acetic acid with concentration is correctly represented by: (Four graphs of Λm against √C: (a) a rising straight line; (b) a rising arch; (c) a falling curve; (d) a rising curve levelling off.)
Solution. Answer (from key): (c). For a weak electrolyte Λm falls steeply as concentration increases (dissociation falls), unlike a strong electrolyte's straight line.
Teacher's Note: Weak electrolytes show a sharp fall in Λm with concentration.
Exam Note: Contrast with Debye-Huckel-Onsager line.
Question TS2.36. Distribution of fraction of molecules with velocity is represented in the figure. Velocity corresponding to X (the peak of the curve) is:
(a) √(2RT/M) (b) √(3RT/M) (c) √(8RT/πM) (d) none of these
Solution. Answer (from key): (a). The peak corresponds to the most probable velocity, √(2RT/M).
Teacher's Note: The curve maximum is the most probable speed.
Exam Note: Give most probable, mean and rms speeds.
Question TS2.37. CH3COOH is neutralized by NaOH. Conductometric titration curve will be of the type: (Four graphs of conductance against volume of NaOH: (a) nearly flat or slowly rising, then rising steeply; (b) V-shaped; (c) falling then flat; (d) inverted V.)
Solution. Answer (from key): (a). The weak acid is replaced by its fully ionised sodium salt, so conductance rises slowly; after the equivalence point excess NaOH makes it rise steeply.
Teacher's Note: Weak acid-strong base: slow rise, then steep rise.
Exam Note: Describe both segments.
Question TS2.38. If for a given substance, TB is the m.pt. and TA is the freezing point, then correct variation of entropy by graph between entropy change (ΔS) and temperature is: (Four graphs of ΔS against T with marked temperatures TA and TB: (a) a step up between TA and TB; (b) a rise then fall; (c) a step at TA; (d) two peaks.)
Solution. Answer (from key): (a). The key's choice is reproduced as printed; the graphs are ambiguous in the scan and this is flagged for human check.
Teacher's Note: Entropy of a substance rises sharply at a phase change.
Exam Note: Look for a jump at the transition temperature.
Question TS2.39. Which of the following represents zero order reaction? (Four graphs of rate against concentration: (a) horizontal line; (b) rising line through the origin; (c) rate against [conc.]2 straight line; (d) another straight line against [conc.]2.)
Solution. Answer (from key): (a). For zero order, rate = k, independent of concentration.
Teacher's Note: Rate is independent of concentration for zero order.
Exam Note: Say rate is constant.
Question TS2.40. This graph represents: (Figure: t1/2 on the vertical axis against 1/a2, a straight line through the origin.)
(a) first order reaction (b) zero order reaction (c) second order reaction (d) third order reaction
Solution. Answer (from key): (d). t1/2 ∝ 1/an-1; a straight line against 1/a2 gives n - 1 = 2, so n = 3.
Teacher's Note: Compare t1/2 ∝ 1/a^(n-1) with the plotted variable.
Exam Note: Find n from the exponent.
Question TS2.41. The efficiency of the reversible cycle shown in the given figure is: (Figure: temperature against entropy in J K-1: A = (S 500, T 100 K), B = (500, 200 K), C = (1000, 100 K). Hint: efficiency = area bounded by the curve/total area under the curve BC × 100.)
(a) 33.33% (b) 56% (c) 66% (d) 16.7%
Solution. Answer (from key): (a). Work = area of triangle ABC = (1/2)(500)(100) = 25000 J; heat absorbed = area under BC = (500)(150) = 75000 J; efficiency = 25000/75000 = 33.33%.
Teacher's Note: On a T-S diagram, heat is the area under the curve, work the enclosed area.
Exam Note: Use triangle area over trapezoid area.
Question TS2.42. Which of the following curves represents the chemical adsorption? (Four graphs of x/m against temperature: (a) falling curve; (b) rising line; (c) a curve rising to a maximum then falling; (d) two peaks.)
Solution. Answer (from key): (c). Chemisorption needs activation energy, so it first increases with temperature and then falls as the adsorbate desorbs.
Teacher's Note: Chemisorption rises with T first, then falls.
Exam Note: Contrast with physisorption.
Question TS2.43. Energy of electron varies with atomic number as the following curve/line: (Four graphs of E against Z2: (a) rising line; (b) horizontal line; (c) rising curve; (d) falling line.)
Solution. Answer (from key): (d). E = -(Z2/n2) × 13.6 eV, so E decreases (becomes more negative) linearly with Z2.
Teacher's Note: E ∝ -Z^2 for a given n.
Exam Note: Write E = -13.6 Z²/n² eV.
Question TS2.44. A radioactive sample consists of two distinct species having equal number of atoms initially. The mean life of one of the species is τ and that of the other is 5τ. The decay products in both the cases are stable. A plot is made of total number of radioactive nuclei as the function of time. Which of the following figures best represents the form of this plot? (Four graphs of N against t: (a) a decay with initial flat portion; (b) a dip and rise; (c) oscillation; (d) a smoothly decaying curve.)
Solution. Answer (from key): (d). N(t) = N0(e-t/τ + e-t/5τ) is the sum of two decaying exponentials: a smooth, monotonically decreasing curve.
Teacher's Note: Total activity decays spontaneously, never rises.
Exam Note: Add two decaying exponentials.
Question TS2.45. In following isothermal graphs A, B and C at temperatures T1, T2 and T3, the correct order of temperatures will be: (Figure: three hyperbolas of P against V with labels T1, T2, T3 near the upper left and curves A (lowest), B, C (highest) at the right.)
(a) T1 > T2 > T3 (b) T1 > T3 > T2 (c) T3 > T2 > T1 (d) T3 > T1 > T2
Solution. Answer (from key): (d). The key's order is reproduced as printed; since the T-labels in the scan are hard to match to curves, this should be checked by a human (higher temperature lies farther from the origin).
Teacher's Note: On a P-V plot, higher temperature isotherm lies farther from the axes.
Exam Note: Higher T means a farther isotherm.
Question TS2.46. N2(g) + 3H2(g) ⇌ 2NH3(g); ΔH° = -22.4 kJ mol-1. Percentage yield of the reaction against pressure is plotted at three different temperatures T1, T2 and T3, then: (Figure: yield against pressure (atm, 100 to 400): T3 is the highest curve, T2 the middle, T1 the lowest.)
(a) T3 > T2 > T1 (b) T1 > T2 > T3 (c) T1 = T2 = T3 (d) none of these
Solution. Answer (from key): (b). The reaction is exothermic, so yield falls as temperature rises; the highest yield curve (T3) is the lowest temperature, so T1 > T2 > T3.
Teacher's Note: Exothermic reactions give higher yield at lower temperature.
Exam Note: Apply Le Chatelier to temperature.
Question TS2.47. From the given graph, predict the compound which would be most easily purified by recrystallisation from aqueous solution: (Figure: solubility in water (g/100°C) against temperature: CaCO3 rises very steeply at high temperature, ZnS and CaF2 rise gently as straight lines, NaCl is a horizontal line.)
(a) ZnS (b) CaCO3 (c) CaF2 (d) NaCl
Solution. Corrected: (b) CaCO3. Recrystallisation needs a compound whose solubility rises steeply with temperature, so it dissolves hot and crystallises on cooling; CaCO3 has the steepest curve, whereas NaCl's solubility is nearly constant. The printed key gives (d).
Teacher's Note: Recrystallisation needs a large solubility change with temperature.
Exam Note: Choose the steepest solubility curve.
Question TS2.48. Which of the following curves represents the Henry's law? (Four graphs of log m against log P: (a) falling curve; (b) rising straight line with a positive intercept; (c) falling straight line; (d) rising straight line from lower left.)
Solution. Answer (from key): (b). m = kP gives log m = log k + log P, a straight line of slope 1 with positive intercept log k.
Teacher's Note: Take logarithms of m = kP.
Exam Note: Write log m = log k + log P.
IIT Entrance Test Papers: Test Series III (Test of Matching Aptitude)
Question TS3.1. Match the List-I with List-II and pick up the correct matching from the codes given below:
A. (∂E/∂V)T = 0; B. W = -ΔE; C. ΔE = 0; D. ΔG°; E. (∂T/∂P)H ≠ 0
1. Isothermal process; 2. -nFE°; 3. Adiabatic reaction; 4. van der Waals gas; 5. Ideal gas
Codes: (a) A-2 B-1 C-4 D-5 E-3; (b) A-2 B-5 C-1 D-4 E-3; (c) A-3 B-1 C-2 D-5 E-4; (d) A-5 B-4 C-1 D-2 E-3; (e) A-5 B-3 C-1 D-2 E-4
Solution. Answer (from key): (e). A-5: internal energy of an ideal gas is independent of volume; B-3: W = -ΔE when q = 0 (adiabatic); C-1: ΔE = 0 in an isothermal ideal-gas process; D-2: ΔG° = -nFE°; E-4: a non-zero Joule-Thomson coefficient belongs to a real (van der Waals) gas.
Teacher's Note: Ideal gas has zero Joule-Thomson effect; real gas does not.
Exam Note: Match each with the condition it defines.
Question TS3.2. Match the Column-I with Column-II: (I) 4020Ca (II) 13353I (III) 12153I (IV) 23290Th
1. Unstable, α-emitter; 2. Unstable, β-emitter; 3. Unstable, positron emitter; 4. Stable
Codes: (a) I-1 II-2 III-3 IV-4; (b) I-4 II-3 III-2 IV-1; (c) I-4 II-2 III-3 IV-1; (d) I-4 II-3 III-3 IV-2
Solution. Answer (from key): (c). Ca-40 (n/p = 1) is stable; I-133 is neutron-rich (n/p above the stability band) and emits β-; I-121 is neutron-poor and emits positrons; Th-232 (Z > 83) is an α-emitter.
Teacher's Note: Neutron-rich emits β-, neutron-poor emits β+, heavy nuclei emit α.
Exam Note: Judge n/p ratio for each nuclide.
Question TS3.3. Match the List-I with List-II and select the correct answer using the options given below the lists: (Electrochemical parameter) I. Ionic mobility; II. Cell constant; III. Specific conductance; IV. Molar conductance. (Units) 1. cm-1; 2. ohm-1 cm-1; 3. ohm-1 cm2 mol-1; 4. cm2 V-1 s-1
Codes: (a) I-4 II-1 III-2 IV-3; (b) I-2 II-3 III-4 IV-1; (c) I-3 II-1 III-2 IV-4; (d) I-1 II-2 III-2 IV-4
Solution. Answer (from key): (a). Ionic mobility: cm2 V-1 s-1; cell constant l/A: cm-1; specific conductance: ohm-1 cm-1; molar conductance: ohm-1 cm2 mol-1.
Teacher's Note: Derive units from definitions: κ = (1/R)(l/A), Λ = κ/c.
Exam Note: Derive each unit from its formula.
Question TS3.4. Match the Column-I with Column-II and select the correct answer using the sequences given below: (Compounds) A. NaN3; B. N2H4; C. NH2OH (printed; the key pairs C with +1, which fits N2O); D. N2O5. (Oxidation state of nitrogen) 1. +5; 2. +1; 3. -1/3; 4. -2
Codes (A, B, C, D): (a) 3, 4, 2, 1; (b) 1, 2, 3, 4; (c) 3, 4, 1, 2; (d) 4, 3, 2, 1
Solution. Answer (from key): (a). NaN3: N = -1/3; N2H4: -2; N2O: +1 (for NH2OH, N would be -1, which is not listed, so the key's pairing assumes N2O); N2O5: +5. Flagged for human check.
Teacher's Note: Use the sum-of-oxidation-numbers rule for each compound.
Exam Note: Average oxidation state for azide.
Question TS3.5. Match the Column-I with Column-II and pick up the correct alternate: (I) For spontaneous reaction; (II) For endothermic reaction; (III) Bond dissociation energy; (IV) For solids and liquids in a thermochemical reaction
A. Σ(BE)R - Σ(BE)P; B. ΔH = ΔE; C. ΔG = -ve; D. ΣHP > ΣHR
Codes: (a) I-C II-A III-D IV-B; (b) I-B II-D III-A IV-C; (c) I-C II-B III-B IV-A; (d) I-C II-D III-A IV-B
Solution. Answer (from key): (d). Spontaneous: ΔG negative (C); endothermic: ΣHproducts > ΣHreactants (D); ΔH from bond energies = Σ(BE)R - Σ(BE)P (A); for solids and liquids Δng = 0 so ΔH = ΔE (B).
Teacher's Note: For condensed phases Δn(gas) is zero, so ΔH = ΔE.
Exam Note: Link each to its defining expression.
Question TS3.6. Match the Column-I with Column-II and pick up the correct answer: (I) Nickel; (II) ZSM-5; (III) SiO2
A. Conversion of alcohol to gasoline; B. Alkylation of benzene; C. Hydrogenation of oil
Codes: (a) I-C II-A III-B; (b) I-A II-B III-C; (c) I-C II-B III-A; (d) I-B II-C III-B
Solution. Answer (from key): (a). Nickel catalyses hydrogenation of oils; ZSM-5 converts alcohol (methanol) to gasoline; the silica-based catalyst is paired with alkylation of benzene by the key.
Teacher's Note: Nickel is the classic hydrogenation catalyst; ZSM-5 is the shape-selective zeolite.
Exam Note: Know Ni-oil and ZSM-5-gasoline.
Question TS3.7. Match the List-I (enzymes) with List-II (metals) and select the correct answer using the codes given below the lists: A. Nitrogenase; B. Cytochrome oxidase; C. Cytochrome-C; D. Carboxypeptidase. 1. Cu; 2. Mo; 3. Zn; 4. Fe
Codes (A, B, C, D): (a) 1, 2, 4, 3; (b) 2, 1, 3, 4; (c) 2, 1, 4, 3; (d) 1, 2, 3, 4
Solution. Corrected: (c). Nitrogenase contains Mo (with Fe); cytochrome oxidase contains Cu; cytochrome-C contains Fe; carboxypeptidase contains Zn. This gives A-2, B-1, C-4, D-3. The printed key gives (b).
Teacher's Note: Cytochromes carry iron; oxidase pairs with copper.
Exam Note: Match each enzyme with its metal centre.
Question TS3.8. Match the Column-I with Column-II and select the correct answer: (I) Curie; (II) Rutherford; (III) Becquerel
A. 106 dis sec-1; B. 3.7 × 1010 dis sec-1; C. 1 dis sec-1
Codes: (a) I-B II-A III-C; (b) I-B II-C III-A; (c) I-A II-B III-C; (d) I-C II-B III-A
Solution. Answer (from key): (a). 1 Curie = 3.7 × 1010 dis/s; 1 Rutherford = 106 dis/s; 1 Becquerel = 1 dis/s.
Teacher's Note: Memorise the three activity units.
Exam Note: Quote the three values.
Question TS3.9. Match the List-I with List-II: (I) ΔH = qP; (II) Kirchhoff's equation; (III) H+(aq.); (IV) Spontaneous process
1. ΔS° = 0; 2. State function; 3. Path function; 4. ΔG > 0; 5. ΔS°Total > 0; 6. ΔH2 - ΔH1 = ΔCp(T2 - T1)
Codes (I, II, III, IV): (a) 1, 2, 4, 5; (b) 5, 4, 3, 6; (c) 2, 6, 1, 5; (d) 6, 2, 5, 1
Solution. Answer (from key): (c). ΔH = qP shows enthalpy is a state function (2); Kirchhoff's equation (6); the standard entropy of H+(aq) is taken as zero (1); a spontaneous process has ΔStotal > 0 (5).
Teacher's Note: H+(aq) is the conventional zero for entropy and enthalpy scales.
Exam Note: Recall the conventional zero for H+(aq).
Question TS3.10. Match the List-I with List-II: (I) Mixing of two ideal gases; (II) Criterion for irreversibility; (III) Isobaric thermal coefficient of an ideal gas; (IV) Joule-Thomson effect
1. ΔGmix = 0; 2. 1/P; 3. 1/T; 4. ΔSTotal > 0; 5. ΔGmix < 0; 6. ΔH = 0
Codes (I, II, III, IV): (a) 1, 2, 4, 5; (b) 5, 4, 3, 6; (c) 2, 6, 1, 5; (d) 6, 2, 5, 1
Solution. Answer (from key): (b). Mixing of ideal gases: ΔGmix < 0 (5); irreversibility: ΔStotal > 0 (4); isobaric thermal coefficient (1/V)(∂V/∂T)P = 1/T (3); Joule-Thomson expansion is isenthalpic, ΔH = 0 (6).
Teacher's Note: Define α = (1/V)(∂V/∂T)p = 1/T for an ideal gas.
Exam Note: Joule-Thomson expansion is isenthalpic.
Question TS3.11. Match the List-I with List-II: (I) Translational kinetic energy; (II) Rotational kinetic energy of CO2; (III) Translational kinetic energy per unit volume; (IV) γ for CO2 at very high temperature
1. (3/2)P; 2. 15/13; 3. 7/5; 4. Function of T only; 5. RT; 6. (3/2)RT
Codes: (a) 3, 4, 5, 1; (b) 4, 5, 1, 2; (c) 5, 6, 2, 3; (d) 6, 5, 1, 2
Solution. Answer (from key): (d). Translational energy per mole = (3/2)RT; linear CO2 has 2 rotational degrees: RT; energy per unit volume = (3/2)P; at very high T all vibrational modes are active (CV = 13R/2, CP = 15R/2) so γ = 15/13.
Teacher's Note: Count active degrees of freedom: 3 translational, 2 rotational, 4 vibrational modes.
Exam Note: Count vibrational modes of CO2: 3N-5 = 4.
Question TS3.12. Match the Column-X with Column-Y: (Colloids) (I) Rain cloud; (II) Milk of magnesia; (III) Soap suds; (IV) Butter; (Classification) A. Sol; B. Aerosol; C. Gel; D. Foam
Codes (I, II, III, IV): (a) A, B, C, D; (b) A, C, B, D; (c) B, A, D, C; (d) B, A, C, D
Solution. Answer (from key): (c). Rain cloud is an aerosol (B); milk of magnesia is a sol (A); soap suds are a foam (D); butter is a gel (C).
Teacher's Note: Identify dispersed phase and medium for each colloid.
Exam Note: State both phases for each colloid.
Question TS3.13. Match the List-I with List-II and select the correct answer from given codes: (Spectrum) A. Lyman; B. Paschen; C. Balmer; D. Pfund. (Region) 1. Ultraviolet; 2. Visible; 3. Near infrared; 4. Far infrared
Codes (A, B, C, D): (a) 1, 3, 2, 4; (b) 1, 2, 3, 4; (c) 4, 3, 2, 1; (d) 1, 2, 4, 3
Solution. Answer (from key): (a). Lyman is ultraviolet (n → 1), Paschen near infrared (n → 3), Balmer visible (n → 2), Pfund far infrared (n → 5).
Teacher's Note: Final level n = 1, 2, 3, 5 gives UV, visible, near IR, far IR.
Exam Note: Link final level to region.
Question TS3.14. Match the List-I with List-II and select the correct answer: A. Critical temperature; B. Boyle temperature; C. Inversion temperature; D. Reduced temperature
1. a/Rb; 2. 2a/Rb; 3. T/Tc; 4. 8a/27Rb
Codes (A, B, C, D): (a) 4, 1, 2, 3; (b) 2, 1, 4, 3; (c) 4, 3, 2, 1; (d) 2, 3, 1, 4
Solution. Answer (from key): (a). Tc = 8a/27Rb; TB = a/Rb; Ti = 2a/Rb; Tr = T/Tc.
Teacher's Note: Van der Waals characteristic temperatures in terms of a, b, R.
Exam Note: Recall Tc, TB, Ti formulas.
Question TS3.15. Match the List-I, List-II and List-III and select the answer from the given codes: (Order) A. Zero, B. First, C. Second, D. Third; (Unit of rate constant) (i) L2 mol-2 s-1, (ii) L mol-1 s-1, (iii) s-1, (iv) mol L-1 s-1; (Relation between half life and initial concentration) 1. t1/2 = constant; 2. t1/2 ∝ 1/a; 3. t1/2 ∝ a; 4. t1/2 ∝ 1/a2
Codes: (a) i-2 ii-4 iii-3 iv-1; (b) i-4 iv-3 iii-1 ii-2; (c) iv-3 iii-1 ii-2 i-4; (d) ii-2 i-1 iii-3 iv-4
Solution. Answer (from key): (c). Zero order: mol L-1 s-1, t1/2 ∝ a; first: s-1, constant; second: L mol-1 s-1, t1/2 ∝ 1/a; third: L2 mol-2 s-1, t1/2 ∝ 1/a2.
Teacher's Note: Unit of k is (mol/L)^(1-n) s^-1; t1/2 ∝ a^(1-n).
Exam Note: Use the general units and t1/2 rules.
Question TS3.16. Match the List-I (solutions of salts) with List-II (pH of the solutions) and select the correct answer using the codes given below the lists: A. Weak acid and strong base; B. Strong acid and weak base; C. Weak acid and weak base; D. Strong acid and strong base
1. ½ pKw; 2. ½[pKw - pKb + pKa]; 3. ½[pKw - pKa - log c]; 4. ½[pKw + pKa + log c]
Codes (A, B, C, D): (a) 4, 3, 2, 1; (b) 1, 2, 3, 4; (c) 2, 3, 4, 1; (d) 3, 2, 1, 4
Solution. Answer (from key): (a). Salt of weak acid and strong base: pH = ½[pKw + pKa + log c]; salt of strong acid and weak base: pH = ½[pKw - pKb - log c] (the printed list shows pKa in entry 3, accepted as the key pairs it); weak-weak: ½[pKw + pKa - pKb]; strong-strong: ½pKw = 7.
Teacher's Note: Hydrolysis pH formulas for the four salt types.
Exam Note: Recall the four salt pH formulas.
Question TS3.17. Match the List-I with List-II and choose the correct answer from the codes: (Electrolyte) A. Bi2S3; B. Al(OH)3; C. CdS; D. CaF2. (Solubility product) 1. 4s3; 2. 27s4; 3. 108s5; 4. s2
Codes (A, B, C, D): (a) 1, 2, 3, 4; (b) 2, 3, 1, 4; (c) 4, 3, 2, 1; (d) 3, 2, 4, 1
Solution. Answer (from key): (d). Bi2S3: (2s)2(3s)3 = 108s5; Al(OH)3: s(3s)3 = 27s4; CdS: s2; CaF2: s(2s)2 = 4s3.
Teacher's Note: Ksp = (xs)^x (ys)^y for AxBy.
Exam Note: Substitute stoichiometric coefficients.
Question TS3.18. Match the following combinations of electrical units with their terms as single unit: (I) ampere-second; (II) volt-ampere; (III) volt-ampere-1; (IV) watt/ampere ohm (printed; read as watt/(ampere × ohm)); (V) joule/ampere second
A. coulomb; B. ohm; C. ampere; D. watt; E. volt
Codes (A, B, C, D, E): (a) I, III, IV, II, V; (b) I, II, III, IV, V; (c) V, IV, III, II, I; (d) I, V, IV, II, III
Solution. Answer (from key): (a). A·s = coulomb (I-A); V·A = watt (II-D); V/A = ohm (III-B); W/(A·Ω) = (I²R)/(IR) = ampere (IV-C); J/(A·s) = volt (V-E).
Teacher's Note: Reduce each combination to base electrical units.
Exam Note: Use P = VI and V = IR.
Question TS3.19. Match the List-I with List-II and select the correct answer from the given codes: (Thermodynamic properties) A. Free energy change of a reaction (ΔG); B. Standard enthalpy change (ΔH°) of a reaction; C. Standard entropy change (ΔS°); D. Standard free energy change (ΔG°)
(Relation) 1. -RT log K; 2. RT2(d ln K/dT)P; 3. -nFE; 4. -(dΔG/dT)P
Codes (A, B, C, D): (a) 3, 2, 4, 1; (b) 1, 2, 3, 4; (c) 4, 3, 2, 1; (d) 2, 3, 1, 4
Solution. Answer (from key): (a). ΔG = -nFE (3); ΔH° from the van't Hoff equation = RT2(d ln K/dT) (2); ΔS° = -(dΔG°/dT)P (4); ΔG° = -RT ln K (1).
Teacher's Note: Link each quantity with its thermodynamic derivative or relation.
Exam Note: Recall the van't Hoff isobar.
Question TS3.20. Match the List-I, List-II and List-III: A. ΔG > 0; B. ΔG < 0; C. ΔG = 0 (List-II: X. ΔS > 0; Y. ΔS < 0; Z. ΔS = 0) (List-III: 1. Non-spontaneous; 2. Spontaneous; 3. Equilibrium)
Select the correct answer from the following codes (A, B, C): (a) (Y, 1), (X, 2), (Z, 3); (b) (X, 2), (Y, 3), (Z, 1); (c) (X, 3), (Y, 1), (Z, 2); (d) (Y, 1), (X, 3), (Z, 2)
Solution. Answer (from key): (a). ΔG > 0 is non-spontaneous (paired with ΔS < 0); ΔG < 0 is spontaneous (with ΔS > 0); ΔG = 0 is equilibrium (ΔS = 0).
Teacher's Note: ΔG sign decides spontaneity; equilibrium has ΔG = 0.
Exam Note: State the sign convention for ΔG.
Matrix match (Test Series III, Q21-31)
Question TS3.21. Match the Column-I with Column-II: (a) Spontaneous process; (b) Heat flow from high temperature of system towards low temperature of surroundings; (c) Exergonic process; (d) Increase in the randomness of system by heating
(p) ΔH = -ve; (q) ΔG = +ve; (r) ΔSTotal = +ve; (s) ΔG = -ve
Solution. Answer (from key): (a-r, s), (b-p, r, s), (c-q), (d-q, r). Note: an exergonic process has ΔG negative, so (c) would match (s); the key's (c-q) and the pairings for (d) are reproduced as printed and flagged for human check.
Teacher's Note: Exergonic means free energy is released (ΔG < 0).
Exam Note: Exergonic: ΔG < 0.
Question TS3.22. Match the items of Column-I with the items of Column-II (Metal - Packing/coordination number): (a) Na; (b) Cu; (c) Au; (d) K
(p) ccp; (q) bcc; (r) 12; (s) 8
Solution. Answer (from key): (a-q, s), (b-p, r), (c-p, r), (d-q, s). Na and K are body-centred cubic (coordination number 8); Cu and Au are cubic close-packed (coordination number 12).
Teacher's Note: bcc has coordination number 8; ccp has 12.
Exam Note: Recall crystal structure of each metal.
Question TS3.23. Match the Column-I with Column-II and Column-III: l = edge length of unit cell; r = radius of spherical constituent unit. (a) Simple cubic unit cell; (b) Face-centred cubic unit cell; (c) Body-centred cubic unit cell. (p) l√3 = 4r; (q) l = 2r; (r) l√2 = 4r. (u) 74% occupied space; (v) 67.98% occupied space; (w) 52.33% occupied space
Solution. Answer (from key): (a-q-w), (b-r-u), (c-p-v). Simple cubic: l = 2r, packing 52.36%; fcc: face diagonal l√2 = 4r, packing 74%; bcc: body diagonal l√3 = 4r, packing 68%.
Teacher's Note: Atoms touch along edge (sc), face diagonal (fcc) or body diagonal (bcc).
Exam Note: Know contact direction and efficiency.
Question TS3.24. Match the List-I with List-II: (a) Silicon doped with phosphorus; (b) Metal excess non-stoichiometry in NaCl; (c) Ge doped with Ga; (d) Anion vacancy with trapped electron
(p) Acceptor level above valence bond; (q) n-type semiconductor; (r) Donor level just below the conduction band; (s) F-centre
Solution. Answer (from key): (a-q, r), (b-s), (c-p), (d-s). Phosphorus (group 15) in silicon gives an n-type semiconductor with donor levels just below the conduction band; excess metal in NaCl gives F-centres (electrons in anion vacancies); gallium (group 13) in germanium gives a p-type semiconductor with an acceptor level above the valence band.
Teacher's Note: Group 15 dopant gives extra electrons (n-type); group 13 gives holes (p-type).
Exam Note: Identify dopant group, then type.
Question TS3.25. Match the solids in List-I with their properties in List-II: (a) MnO; (b) ZnO; (c) CrO2; (d) TiO
(p) Ferromagnetic solid; (q) Antiferromagnetic solid; (r) Zero magnetic moment; (s) Attracted in magnetic field
Solution. Answer (from key): (a-q, r), (b-r), (c-p, s), (d-s). MnO is antiferromagnetic (net moment zero); ZnO (Zn2+, 3d10) is diamagnetic; CrO2 is ferromagnetic; TiO is paramagnetic.
Teacher's Note: Count unpaired electrons: d10 means diamagnetic.
Exam Note: Write d-configurations.
Question TS3.26. Match the List-I with List-II: (a) The highest temperature at which liquid CO2 exists; (b) 8a/27Rb; (c) Compressibility factor Z = 3/8 at; (d) Compressibility factor Z = 1 for
(p) Vreal/Videal; (q) Critical temperature; (r) Ideal gas; (s) 30.98°C
Solution. Answer (from key): (a-q, s), (b-q), (c-p, q), (d-r). The highest temperature for liquid CO2 is its critical temperature, 30.98°C; Tc = 8a/27Rb; at the critical point Z = 3/8 (a ratio of real to ideal volume); Z = 1 for an ideal gas.
Teacher's Note: Critical Z for a van der Waals gas is 3/8.
Exam Note: Recall Zc = 3/8.
Question TS3.27. Match the physical properties of Column-I with their values in Column-II: (a) SATP; (b) Temperature in STP; (c) Pressure in NTP; (d) Standard boiling point of water. (SATP: standard ambient temperature and pressure; STP: standard temperature and pressure; NTP: normal temperature and pressure.)
(p) 1 bar/1 atm; (q) 99.6°C; (r) 273.15 K; (s) 298.15 K
Solution. Answer (from key): (a-p, s), (b-r), (c-p), (d-q). SATP = 1 bar and 298.15 K; STP temperature 273.15 K; NTP pressure 1 atm; the standard boiling point of water (at 1 bar) is 99.6°C.
Teacher's Note: Water boils at 99.6°C under 1 bar, not 1 atm.
Exam Note: Distinguish bar from atm.
Question TS3.28. Match the quantities in Column-I with their units in Column-II: (a) Coefficient of viscosity; (b) van der Waals' constant 'b'; (c) Molar volume of gas at STP = 22.4...; (d) van der Waals' constant 'a'
(p) L mol-1; (q) N s m-2; (r) Pa s; (s) L2 atm mol-2
Solution. Answer (from key): (a-q, r), (b-p), (c-p), (d-s). Viscosity: N s m-2 = Pa s; b and molar volume: L mol-1; a: L2 atm mol-2.
Teacher's Note: N s m^-2 and Pa s are the same unit.
Exam Note: Convert N m^-2 to Pa.
Question TS3.29. Match the temperature in List-I with its value in List-II: (a) Critical temperature; (b) Boyle's temperature; (c) 1/2 [Inversion temperature]; (d) Reduced temperature
(p) a/Rb; (q) θ; (r) T/Tc; (s) 8a/27Rb
Solution. Answer (from key): (a-s), (b-p), (c-p), (d-q, r). Tc = 8a/27Rb; TB = a/Rb; Ti/2 = a/Rb; reduced temperature θ = T/Tc.
Teacher's Note: Inversion temperature is twice the Boyle temperature.
Exam Note: Recall Ti = 2a/Rb.
Question TS3.30. Match the items of Column-I with its proportional term in the items of Column-II: (a) Kinetic energy; (b) Partial pressure of a gas; (c) Rate of diffusion; (d) Vapour pressure of a liquid
(p) Mole fraction; (q) Density; (r) Molar mass; (s) Absolute temperature
Solution. Answer (from key): (a-s), (b-p, s), (c-q, r), (d-p, s). KE ∝ T; partial pressure ∝ mole fraction (and ∝ T at fixed volume); rate of diffusion ∝ 1/√(density or molar mass); vapour pressure (of a component) ∝ mole fraction and varies with absolute temperature, as the key pairs.
Teacher's Note: Graham's law: rate ∝ 1/√d ∝ 1/√M.
Exam Note: State Graham's law.
Question TS3.31. Match the List-I with List-II and List-III: (Solids) (a) Rock salt; (b) Fluorite; (c) AgI, ZnS; (d) Na2O. (Unit cell) (p) Face-centred cubic, anion in tetrahedral void; (q) Face-centred cubic, cation in octahedral void; (r) Face-centred cubic, cation in alternate tetrahedral void; (s) Face-centred cubic, cation in tetrahedral void. (Coordination number) (w) 6; (x) Cation (8), anion (4); (y) Cation (4), anion (8); (z) Cation (4), anion (4)
Solution. Answer (from key): (a-q-w), (b-p-x), (c-r-z), (d-s-y). Rock salt: Cl- fcc with Na+ in octahedral voids (6:6); fluorite: Ca2+ fcc with F- in tetrahedral voids (8:4); zinc blende/AgI: S2- fcc with Zn2+ in alternate tetrahedral voids (4:4); Na2O (antifluorite): O2- fcc with Na+ in all tetrahedral voids (cation 4, anion 8).
Teacher's Note: Fluorite and antifluorite are mirror structures.
Exam Note: Count voids occupied.
IIT Entrance Test Papers: Test Series IV (Test of Reasoning Aptitude), Reason and Assertion. Mark: (a) both (A) and (R) true and R is the correct explanation; (b) both true but R is not the correct explanation; (c) A true but R false; (d) both false; (e) A false but R true
Question TS4.1. (A) CH4 and CO2 have the value of Z (compressibility factor) less than one. (R) Z < 1 is due to repulsive forces among the molecules.
Solution. Corrected: (c). A is true (at moderate pressure attractive forces dominate); R is false because Z < 1 arises from attractive forces, while repulsion gives Z > 1. The printed key gives (a).
Teacher's Note: Z < 1 means attraction dominates; Z > 1 means repulsion dominates.
Exam Note: Attraction lowers Z; repulsion raises it.
Question TS4.2. (A) More is the value of van der Waals' constant 'a', greater is the tendency of liquefaction. (R) 'a' measures the magnitude of force of attraction among the molecules.
Solution. Answer (from key): (a). A larger 'a' means stronger attraction, so easier liquefaction, and R is the explanation.
Teacher's Note: Larger a means stronger intermolecular attraction and a higher critical temperature.
Exam Note: Link a to attraction and Tc.
Question TS4.3. (A) Crystalline solids are anisotropic. (R) Crystalline solids are not as closely packed as amorphous solids.
Solution. Answer (from key): (c). Crystalline solids are anisotropic because of ordered arrangement; R is false since crystalline solids are more closely packed.
Teacher's Note: Ordered arrangement gives direction-dependent properties.
Exam Note: Reject R: crystals pack more efficiently.
Question TS4.4. (A) Antiferromagnetic substances possess zero magnetic moment. (R) MnO is an antiferromagnetic substance.
Solution. Answer (from key): (b). Both are true: in antiferromagnetic solids equal and opposite spin alignment cancels, and MnO is an example, but MnO being antiferromagnetic does not explain the general property.
Teacher's Note: Antiparallel domain alignment cancels the net moment.
Exam Note: Name MnO as an example, not the cause.
Question TS4.5. (A) Isotonic solutions do not show osmosis. (R) Isotonic solutions have equal osmotic pressure.
Solution. Answer (from key): (a). With equal osmotic pressure there is no net solvent flow across a semipermeable membrane.
Teacher's Note: No net osmosis when osmotic pressures are equal.
Exam Note: State equal osmotic pressure means no net flow.
Question TS4.6. (A) In a gaseous reaction, Kc is unitless when Δn = 0. (R) Unit of Kc = (mol L-1)Δn.
Solution. Answer (from key): (a). With Δn = 0 the unit (mol L-1)0 is 1, so Kc is dimensionless; R explains A.
Teacher's Note: Kc units are (mol/L)^Δn.
Exam Note: Quote the unit formula.
Question TS4.7. (A) Strength of acidic character of oxyacids lies in the following sequence: HClO4 > HBrO4 > HIO4. (R) Greater is the oxidation state of a halogen, more is the acidic character of its oxyacid.
Solution. Answer (from key): (b). The order is correct (decreasing electronegativity of the halogen); R is a true general statement but here all three halogens are in the +7 state, so it does not explain the order.
Teacher's Note: Same oxidation state, so the order follows halogen electronegativity.
Exam Note: Note identical oxidation state +7.
Question TS4.8. (A) The molecularity of the following reaction is 2: H2 + Br2 → 2HBr. (R) The order of reaction is 3/2.
Solution. Answer (from key): (b). The experimental rate law is rate = k[H2][Br2]1/2, so the order is 3/2; the overall equation shows two molecules, but the reaction is a chain mechanism, so the key's treatment is reproduced as printed.
Teacher's Note: The rate law gives the order; the equation alone gives no molecularity.
Exam Note: Quote rate law k[H2][Br2]^1/2.
Question TS4.9. (A) Half-life of a first order reaction is independent of the initial concentration of reactant. (R) t1/2 (first order) = τ/1.44, where τ = average life.
Solution. Answer (from key): (a). For first order t1/2 = 0.693/k and τ = 1/k, so t1/2 = 0.693τ = τ/1.44; both are true and the key treats R as the explanation.
Teacher's Note: Half-life depends only on k for first order.
Exam Note: State t1/2 = 0.693/k.
Question TS4.10. (A) For the reaction 2NH3(g) → N2(g) + 3H2(g), ΔH > ΔU. (R) The enthalpy change is always greater than internal energy change.
Solution. Answer (from key): (c). Δng = 4 - 2 = +2, so ΔH = ΔU + 2RT > ΔU; but ΔH can be less than ΔU when Δng is negative, so R is false.
Teacher's Note: ΔH - ΔU = Δn(gas)RT, which can be negative.
Exam Note: Check sign of Δn(gas).
Question TS4.11. (A) 20Ne and 22Ne are isotones. (R) Noble gases do not show isotopes as they are not reactive.
Solution. Answer (from key): (d). Both are false: they have the same atomic number (isotopes, not isotones), and noble gases do have isotopes.
Teacher's Note: Isotopes share Z; isotones share neutron number.
Exam Note: Compare Z and N.
Question TS4.12. (A) 3dz² orbital is spherically symmetrical. (R) 3dz² orbital is the only d-orbital which is spherical in shape.
Solution. Answer (from key): (d). Both are false: dz² has two lobes along the z axis and a ring in the xy plane, so it is not spherical.
Teacher's Note: None of the d orbitals is spherical.
Exam Note: Describe the dz2 shape.
Question TS4.13. (A) The kinetic energy of the photoelectron ejected increases with increase in intensity of incident radiation. (R) Increase in intensity of incident light increases the rate of emission.
Solution. Answer (from key): (e). A is false (kinetic energy depends on frequency, not intensity); R is true (more photons eject more electrons).
Teacher's Note: KE depends on frequency; intensity sets the number of electrons.
Exam Note: Separate energy from number.
Question TS4.14. (A) 13356Be + e- → 13355Cs + X-ray (as printed). It is a process of K-electron capture. (R) The atomic number decreases by one unit as a result of K-capture.
Solution. Answer (from key): (b). Both are true as statements about K-capture: the nucleus captures a K-shell electron, lowering Z by one and emitting an X-ray as the vacancy fills; the key marks R as not the explanation. The element symbols and mass numbers in the printed equation appear garbled (likely 133Ba → 133Cs).
Teacher's Note: K-capture: p + e- → n, so Z falls by 1.
Exam Note: Note Z falls by 1 in K-capture.
Question TS4.15. (A) Vapour pressure is a colligative property. (R) Colligative property depends on the number of solute particles dissolved in the solution.
Solution. Answer (from key): (e). A is false (it is the lowering of vapour pressure that is colligative); R is true.
Teacher's Note: Relative lowering of vapour pressure is the colligative property.
Exam Note: Say lowering, not vapour pressure itself.
Question TS4.16. (A) Entropy decreases when an egg is boiled. (R) It is solidified like denaturation of albumin.
Solution. Answer (from key): (a). Boiling an egg solidifies albumin into a more ordered network, a decrease in entropy of the egg protein, as R explains.
Teacher's Note: Coagulation of protein is an ordering process.
Exam Note: Link solidification to ordering.
Question TS4.17. (A) 1 faraday = 96,500 coulomb. It is a charge of 1 mole electrons. (R) 1 faraday charge liberates one gram equivalent of substance at an electrode.
Solution. Answer (from key): (b). Both are true; 1 F = NAe = 96485 C, and Faraday's law gives one equivalent per faraday, but this does not explain the definition.
Teacher's Note: One faraday is the charge of one mole of electrons.
Exam Note: Quote F = N_A × e.
Question TS4.18. (A) The electrical resistance of a column of 0.05 M NaOH solution of diameter 1 cm and length 50 cm is 5.55 × 103 ohm. (R) Its resistivity is equal to 76.234 ohm-cm.
Solution. Answer (from key): (c). R = ρl/A gives ρ = RA/l = 5550 × (π × 0.25)/50 = 87.2 ohm cm, so the stated resistivity 76.234 ohm cm is false while the resistance statement is taken as true.
Teacher's Note: ρ = R × A/l with A = π d²/4.
Exam Note: Compute A = 0.785 cm².
Question TS4.19. (A) If water is heated to 350 K, then pOH will increase to 8. (R) Kw increases with increase in temperature.
Solution. Answer (from key): (e). A is false: as Kw rises with temperature, [OH-] rises and pOH falls below 7; R is true.
Teacher's Note: Kw rises with T, so pH and pOH of pure water both fall.
Exam Note: Neutral water has pH = pOH = pKw/2.
Question TS4.20. (A) Magnetic quantum number can have the value 0, ..., (n - 1). (R) Magnetic quantum number specifies the number of orbitals.
Solution. Answer (from key): (e). A is false: ml ranges from -l to +l (the range 0 to n - 1 belongs to l); R is true.
Teacher's Note: l runs 0 to n-1; m runs -l to +l.
Exam Note: Distinguish l from m.
OP Tandon Solutions for JEE Mathematics: OP Tandon Solutions Physical Chemistry IIT JEE Chapter 15 Stoichiometry Part 2
Complete Math Solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 15 Stoichiometry Part 2
Review detailed solutions for JEE Mathematics. The OP Tandon Solutions Physical Chemistry IIT JEE Chapter 15 Stoichiometry Part 2 PDF provides comprehensive answers mapped to standard OP Tandon Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Step-by-Step Mathematical Explanations
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Additional Study Materials for 2026
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.