OP Tandon Solutions Physical Chemistry IIT JEE Chapter 10 Ionic Equilibrium Part 3

Step-by-Step OP Tandon Solutions for JEE Chemistry Chapter 10 Ionic Equilibrium

Access comprehensive textbook solutions for Chapter 10 Ionic Equilibrium using the OP Tandon reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 10 Ionic Equilibrium Textbook Solutions PDF

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Ionic Equilibrium - Objective Questions 7-261, Set-2, Assertion-Reason, Brain Storming, Comprehension and Self Assessment

Straight Objective Type Questions

Question 7. One litre of water contains 10−7 mole of H+ ions. Degree of ionisation of water is: [Hint: Since 1 litre of water contains 1000/18 mole, degree of ionisation = 10−7/(1000/18)] (a) 1.8 × 10−7 % (b) 0.8 × 10−9 % (c) 3.6 × 10−9 % (d) 3.6 × 10−7 %

Solution. Answer (from key): (a) 1.8 × 10−7 %. α = 10−7/(1000/18) = 1.8 × 10−9, i.e. 1.8 × 10−7 %.

Teacher's Note: Compare ionised moles with 55.5 mol of water per litre.

Exam Note: Multiply the fraction by 100 for percent.

Question 8. The degree of dissociation in a weak electrolyte increases: (a) on increasing pressure (b) on decreasing dilution (c) on increasing dilution (d) on increasing concentration

Solution. Answer (from key): (c) on increasing dilution. By Ostwald's dilution law α = √(K/C), so α rises as the solution is diluted.

Teacher's Note: Ostwald: α ∝ 1/√C, so dilution raises dissociation.

Exam Note: α = √(K/C) is the one-line reason.

Question 9. Which of the following is the weakest base? (a) NaOH (b) Ca(OH)2 (c) NH4OH (d) KOH

Solution. Answer (from key): (c) NH4OH. NaOH, KOH and Ca(OH)2 are strong bases; NH4OH is a weak base (Kb = 1.8 × 10−5).

Teacher's Note: Only NH4OH is a weak base among these.

Exam Note: Group 1 and Ca hydroxides are strong.

Question 10. Acetic acid is a weak electrolyte because: (a) its molecular mass is high (b) it is a covalent compound (c) it is highly unstable (d) it does not dissociate much or its ionisation is very small

Solution. Answer (from key): (d) it does not dissociate much or its ionisation is very small. A weak electrolyte is one that ionises only to a small extent in solution.

Teacher's Note: Strength depends on extent of ionisation, not molar mass.

Exam Note: Define weak electrolyte by small ionisation.

Question 11. When NH4Cl is added to NH4OH solution, the dissociation of ammonium hydroxide is reduced. It is due to: [PMT (MP) 1993] (a) common ion effect (b) hydrolysis (c) oxidation (d) reduction

Solution. Answer (from key): (a) common ion effect. NH4Cl supplies NH4+, a common ion, shifting NH4OH ⇌ NH4+ + OH− to the left.

Teacher's Note: Added NH4+ shifts the equilibrium left.

Exam Note: Name the common ion NH4+.

Question 12. The addition of HCl will not suppress the ionisation of: [PMT (MP) 1993] (a) acetic acid (b) sulphuric acid (c) H2S (d) benzoic acid

Solution. Answer (from key): (b) sulphuric acid. H2SO4 is a strong acid and is almost completely ionised, so there is no ionisation left to suppress; the weak acids are suppressed by the common H+ ion.

Teacher's Note: Common ion effect applies only to weak acids.

Exam Note: Strong acids are already fully ionised.

Question 13. H2S in presence of HCl precipitates second group radicals but not fourth group because: (a) HCl activates H2S (b) HCl decreases concentration of sulphide ions (c) HCl increases concentration of sulphide ions (d) sulphides of IV group are unstable in HCl

Solution. Answer (from key): (b) HCl decreases concentration of sulphide ions. HCl supplies H+, which suppresses ionisation of H2S, so [S2−] is low: only the least soluble group II sulphides (small Ksp) precipitate.

Teacher's Note: Group II sulphides need very low [S2−]; group IV needs more.

Exam Note: Link low [S2−] to Ksp sizes.

Question 14. The solubility product of a salt AB is 1 × 10−8. In a solution, in which concentration of A is 10−3 M, AB will precipitate when the concentration of B will be: [PET (MP) 1990] (a) 10−7 M (b) 10−4 M (c) 10−5 M (d) 10−6 M

Solution. Answer (from key): (b) 10−4 M. Precipitation needs [A][B] > Ksp, i.e. [B] > 10−8/10−3 = 10−5 M. Only 10−4 M exceeds this (10−5 M merely reaches saturation).

Teacher's Note: Required [B] must exceed Ksp/[A] = 10−5 M.

Exam Note: Precipitation needs ionic product above Ksp.

Question 15. The solubility product of BaSO4 is 1.5 × 10−9. The precipitation in a 0.01 M Ba2+ ions solution will start on adding H2SO4 of concentration: (a) 10−9 M (b) 10−8 M (c) 10−7 M (d) 10−6 M

Solution. Answer (from key): (d) 10−6 M. [SO42−] needed = Ksp/[Ba2+] = 1.5 × 10−9/0.01 = 1.5 × 10−7 M. Only 10−6 M exceeds this.

Teacher's Note: Needed [SO42−] = Ksp/[Ba2+] = 1.5 × 10−7 M.

Exam Note: Pick the option above the threshold value.

Question 16. Solubility product of BaCl2 is 4 × 10−9. Its solubility would be: [UGET (Manipal) 2006] (a) 1 × 10−27 (b) 1 × 10−3 (c) 1 × 10−7 (d) 1 × 10−2

Solution. Answer (from key): (b) 1 × 10−3. Ksp = 4S3 = 4 × 10−9, so S = 10−3 M.

Teacher's Note: BaCl2 is AB2 type: Ksp = 4S3.

Exam Note: Use 4S3 for AB2 salts.

Question 17. Which pair will show common ion effect? [PMT (MP) 1993] (a) BaCl2 + Ba(NO3)2 (b) NaCl + HCl (c) NH4OH + NH4Cl (d) AgCN + KCN

Solution. Answer (from key): (c) NH4OH + NH4Cl. Common ion effect operates on a weak electrolyte. NH4OH (weak base) with NH4Cl shares NH4+, which suppresses its ionisation.

Teacher's Note: Needs a weak electrolyte plus a salt with a shared ion.

Exam Note: Mixtures of strong electrolytes do not count.

Question 18. What is the correct representation of solubility product of Ag2CrO4? (a) [Ag+]2[CrO42−] (b) [Ag+][CrO42−] (c) [2Ag+][CrO42−] (d) [2Ag+]2[CrO42−]

Solution. Answer (from key): (a) [Ag+]2[CrO42−]. Ag2CrO4 ⇌ 2Ag+ + CrO42−, so Ksp = [Ag+]2[CrO42−]. Coefficients become powers, not multipliers.

Teacher's Note: Stoichiometric coefficient becomes the exponent of the ion concentration.

Exam Note: No coefficient inside the brackets.

Question 19. Solubility product of silver bromide is 5 × 10−13. The quantity of potassium bromide (molar mass taken as 120 g mol−1) to be added to 1 litre of 0.05 M solution of silver nitrate to start the precipitation of AgBr is: [AIEEE 2010] (a) 6.2 × 10−5 g (b) 5.0 × 10−8 g (c) 1.2 × 10−10 g (d) 1.2 × 10−9 g

Solution. Answer (from key): (d) 1.2 × 10−9 g. [Br−] = Ksp/[Ag+] = 5 × 10−13/0.05 = 10−11 M. Mass of KBr = 10−11 mol × 120 g mol−1 = 1.2 × 10−9 g.

Teacher's Note: Find threshold [Br−], then multiply by molar mass for 1 L.

Exam Note: Moles times 120 g/mol, volume 1 L.

Question 20. When equal volumes of the following solutions are mixed, precipitation of AgCl (Ksp = 1.8 × 10−10) will occur only with: [AMU (PMT) 2009] (a) 10−4 M Ag+ + 10−4 M Cl− (b) 10−5 M Ag+ + 10−5 M Cl− (c) 10−6 M Ag+ + 10−6 M Cl− (d) 10−10 M Ag+ + 10−10 M Cl−

Solution. Answer (from key): (a) 10−4 M Ag+ + 10−4 M Cl−. Mixing equal volumes halves each concentration. (a): (5 × 10−5)2 = 2.5 × 10−9 > 1.8 × 10−10, so precipitation occurs. (b): 2.5 × 10−11 < Ksp, and (c), (d) are smaller still.

Teacher's Note: Halve concentrations on mixing, then compare ionic product with Ksp.

Exam Note: Dilution on mixing is the trap.

Question 21. Buffering action of a mixture of CH3COOH and CH3COONa is maximum when the ratio of salt to acid is equal to: (a) 1.0 (b) 100.0 (c) 10.0 (d) 0.1

Solution. Answer (from key): (a) 1.0. Buffer capacity is maximum when [salt] = [acid], i.e. the ratio is 1 and pH = pKa.

Teacher's Note: Maximum capacity at equal salt and acid, pH = pKa.

Exam Note: Ratio 1 gives pH = pKa.

Question 22. Which hydroxide will have lowest value of solubility product at normal temperature (25 °C)? [IIT 1996] (a) Mg(OH)2 (b) Ca(OH)2 (c) Ba(OH)2 (d) Be(OH)2

Solution. Answer (from key): (d) Be(OH)2. Solubility of group 2 hydroxides increases down the group, so Ksp is lowest for Be(OH)2.

Teacher's Note: Group 2 hydroxide solubility rises down the group; Be is least.

Exam Note: Trend: Be(OH)2 is least soluble.

Question 23. The solubility of Al(OH)3 is 'S' g mol L−1. Its solubility product is: (a) S2 (b) S3 (c) 27S4 (d) 27S3

Solution. Answer (from key): (c) 27S4. Al(OH)3 ⇌ Al3+ + 3OH−: [Al3+] = S, [OH−] = 3S, so Ksp = S(3S)3 = 27S4.

Teacher's Note: Cube the 3S for hydroxide, multiply by S.

Exam Note: 27S4: three OH− per Al3+.

Question 24. The solubility products of Al(OH)3 and Zn(OH)2 are 8.5 × 10−23 and 1.8 × 10−14 at room temperature. If the solution contains Al3+ and Zn2+ ions, the ion first precipitated by adding NH4OH is: (a) Al3+ (b) Zn2+ (c) both (d) none of these

Solution. Answer (from key): (a) Al3+. The hydroxide with the much smaller Ksp needs a lower [OH−] to start precipitating, so Al(OH)3 precipitates first.

Teacher's Note: Compare [OH−] needed: smaller Ksp precipitates first.

Exam Note: Lower Ksp precipitates first.

Question 25. The solubility product of CaSO4 is 2.4 × 10−5. When 100 mL of 0.01 M CaCl2 and 100 mL of 0.02 M Na2SO4 are mixed, then: (a) Na2SO4 will precipitate (b) both will precipitate (c) CaSO4 will precipitate (d) none will precipitate

Solution. Answer (from key): (c) CaSO4 will precipitate. After mixing (200 mL): [Ca2+] = 0.005 M and [SO42−] = 0.01 M. Ionic product = 5 × 10−5 > 2.4 × 10−5, so CaSO4 precipitates. Na2SO4 is very soluble.

Teacher's Note: Halve both concentrations, multiply, compare with Ksp.

Exam Note: Ionic product 5 × 10−5 exceeds Ksp.

Question 26. The solubility of AgCl in a solution of common salt is lower than in water. This is due to: (a) salt effect (b) lowering of solubility effect (c) common ion effect (d) complex formation

Solution. Answer (from key): (c) common ion effect. NaCl supplies Cl−, a common ion, which shifts AgCl ⇌ Ag+ + Cl− to the left and lowers solubility.

Teacher's Note: Added Cl− suppresses AgCl dissolution.

Exam Note: Name the common ion effect.

Question 27. The solubility products of AgCl and AgI are 1.1 × 10−10 and 1.6 × 10−16 respectively. If AgNO3 is added drop by drop to the solution containing both chloride and iodide ions, the salt precipitated first is: (a) AgI (b) AgNO3 (c) AgCl (d) both AgI and AgCl

Solution. Answer (from key): (a) AgI. AgI has the much smaller Ksp, so it needs far less Ag+ to reach its ionic product and precipitates first.

Teacher's Note: Smaller Ksp needs less Ag+, so AgI first.

Exam Note: Same stoichiometry: compare Ksp directly.

Question 28. Why is pure NaCl precipitated when HCl gas is passed in saturated solution of NaCl? [PET (MP) 1993] (a) Impurities dissolve in HCl (b) The value of [Na+] and [Cl−] product becomes smaller than Ksp of NaCl (c) The value of [Na+] and [Cl−] product becomes higher than Ksp of NaCl (d) HCl dissolves in water

Solution. Answer (from key): (c) The value of [Na+] and [Cl−] product becomes higher than Ksp of NaCl. HCl adds Cl−, so [Na+][Cl−] exceeds Ksp and NaCl precipitates.

Teacher's Note: Extra Cl− pushes ionic product above Ksp.

Exam Note: Ionic product above Ksp gives precipitate.

Question 29. On passing a current of HCl gas in saturated solution of NaCl, the solubility of NaCl: (a) increases (b) decreases (c) remains unchanged (d) NaCl decomposes

Solution. Answer (from key): (b) decreases. The common ion Cl− from HCl lowers the solubility of NaCl.

Teacher's Note: Common ion Cl− suppresses NaCl solubility.

Exam Note: Common ion effect lowers solubility.

Question 30. In a saturated solution of electrolytes, the ionic products of their respective ions are constant at a particular temperature. This constant for an electrolyte is known as: (a) ionic product (b) ionisation constant (c) dissociation constant (d) solubility product

Solution. Answer (from key): (d) solubility product. By definition this temperature-dependent constant for a saturated solution is the solubility product, Ksp.

Teacher's Note: Constant ionic product at saturation defines Ksp.

Exam Note: Define Ksp at saturation.

Question 31. On addition of ammonium chloride to a solution of NH4OH: (a) dissociation of NH4OH increases (b) concentration of OH− decreases (c) concentration of OH− increases (d) concentration of both NH4+ and OH− increases

Solution. Answer (from key): (b) concentration of OH− decreases. Added NH4+ (common ion) shifts NH4OH ⇌ NH4+ + OH− to the left, so [OH−] falls.

Teacher's Note: Common NH4+ lowers [OH−], so pH falls.

Exam Note: Basic buffer: OH− decreases.

Question 32. The solubility product of a salt A2B is 4 × 10−9. Its solubility would be: [IIT 1990] (a) 4 × 10−2 M (b) 2 × 10−4 M (c) 1 × 10−4 M (d) 1 × 10−3 M

Solution. Answer (from key): (d) 1 × 10−3 M. Ksp = (2S)2(S) = 4S3 = 4 × 10−9, so S = 10−3 M.

Teacher's Note: A2B type: Ksp = 4S3.

Exam Note: Use 4S3, not S2.

Question 33. If the concentration of CrO42− ions in a saturated solution of silver chromate is 2 × 10−4, solubility product of silver chromate will be: [PET (MP) 1992] (a) 4 × 10−8 (b) 8 × 10−12 (c) 16 × 10−12 (d) 32 × 10−12

Solution. Answer (from key): (d) 32 × 10−12. [Ag+] = 2 × 2 × 10−4 = 4 × 10−4 M. Ksp = (4 × 10−4)2(2 × 10−4) = 3.2 × 10−11 = 32 × 10−12.

Teacher's Note: Silver ion is twice chromate; square it in Ksp.

Exam Note: Square [Ag+], which is 4 × 10−4.

Question 34. 50% neutralisation of a solution of formic acid (Ka = 2 × 10−4) with NaOH would result in a solution having a hydrogen ion concentration of: (a) 2 × 10−4 (b) 3.7 (c) 2.7 (d) 1.85

Solution. Answer: (a) 2 × 10−4. At 50% neutralisation [acid] = [salt], so [H+] = Ka = 2 × 10−4 M (pH = pKa = 3.7). Corrected: the printed key gives (c), but 2.7 is neither a concentration nor the pH; the correct option is (a) 2 × 10−4.

Teacher's Note: Half-neutralisation: [H+] = Ka and pH = pKa.

Exam Note: Question asks concentration, not pH.

Question 35. The solubility product of BaCl2 is 4 × 10−9. Its solubility in mol L−1 would be: (a) 1 × 10−3 (b) 1 × 10−9 (c) 4 × 10−27 (d) 1 × 10−27

Solution. Answer (from key): (a) 1 × 10−3. Ksp = 4S3 = 4 × 10−9, so S = 1 × 10−3 mol L−1.

Teacher's Note: AB2 type: S = (Ksp/4)1/3.

Exam Note: Cube root, not square root.

Question 36. Addition of conc. HCl to saturated BaCl2 solution precipitates BaCl2 because: [BHU (Screening) 2010] (a) at constant temperature the product [Ba2+][Cl−]2 remains constant in a saturated solution (b) ionic product of [Ba2+][Cl−] remains constant in a saturated solution (c) of common ion effect (d) it follows Le Chatelier's principle

Solution. Answer (from key): (c) of common ion effect. HCl adds the common ion Cl−, so the ionic product exceeds Ksp and BaCl2 precipitates.

Teacher's Note: Extra Cl− exceeds Ksp; common ion effect.

Exam Note: Name the common ion Cl−.

Question 37. How many grams of CaC2O4 will dissolve in distilled water to make one litre of saturated solution? (Ksp = 2.5 × 10−9 and its molecular mass is 128) [PMT (MP) 1993] (a) 0.0064 g (b) 0.0128 g (c) 0.0032 g (d) 0.0640 g

Solution. Answer (from key): (a) 0.0064 g. S = √Ksp = √(2.5 × 10−9) = 5 × 10−5 mol L−1. Mass = 5 × 10−5 × 128 = 6.4 × 10−3 g.

Teacher's Note: AB type: S = √Ksp, then multiply by molar mass.

Exam Note: Convert mol/L to g/L.

Question 38. On the addition of a solution containing CrO42− ions to the solution of Ba2+, Sr2+ and Ca2+ ions, the precipitate obtained first will be of: [PET (MP) 1993] (a) CaCrO4 (b) SrCrO4 (c) BaCrO4 (d) a mixture of all the three

Solution. Answer (from key): (c) BaCrO4. Solubility of group 2 chromates decreases down the group, so BaCrO4 has the lowest Ksp and precipitates first.

Teacher's Note: BaCrO4 is least soluble, smallest Ksp.

Exam Note: Group 2 chromate solubility falls down the group.

Question 39. Ostwald's dilution law is applicable in the case of the solution of: (a) NaCl (b) NaOH (c) H2SO4 (d) CH3COOH

Solution. Answer (from key): (d) CH3COOH. Ostwald's dilution law holds for weak electrolytes (small α); CH3COOH is the only weak electrolyte listed.

Teacher's Note: Law applies only to weak electrolytes.

Exam Note: Strong electrolytes are excluded.

Question 40. What will be the solubility of AgCl in a 0.1 M NaCl solution? (Ksp AgCl = 1.20 × 10−10) [PMT (MP) 1992] (a) 0.1 M (b) 1.2 × 10−4 M (c) 1.2 × 10−9 M (d) 1.2 × 10−10 M

Solution. Answer (from key): (c) 1.2 × 10−9 M. [Cl−] ≈ 0.1 M, so S = Ksp/[Cl−] = 1.2 × 10−10/0.1 = 1.2 × 10−9 M.

Teacher's Note: Neglect Cl− from AgCl; S = Ksp/0.1.

Exam Note: Divide Ksp by common ion concentration.

Question 41. Which of the following metal sulphides has maximum solubility in water? (a) CdS (Ksp = 36 × 10−30) (b) FeS (Ksp = 11 × 10−20) (c) HgS (Ksp = 32 × 10−54) (d) ZnS (Ksp = 11 × 10−22)

Solution. Answer (from key): (b) FeS (Ksp = 11 × 10−20). All are AB type (S = √Ksp), so the largest Ksp gives the largest solubility: FeS (1.1 × 10−19).

Teacher's Note: Same type of salt: biggest Ksp, biggest solubility.

Exam Note: Compare exponents carefully; FeS is largest.

Question 42. The ionisation constant of acetic acid is 1.8 × 10−5. The concentration at which it will be dissociated to 2% is: (a) 1 M (b) 0.045 M (c) 0.018 M (d) 0.45 M

Solution. Answer (from key): (b) 0.045 M. Ka = Cα2, so C = Ka/α2 = 1.8 × 10−5/(0.02)2 = 0.045 M.

Teacher's Note: Use C = Ka/α2 with α = 0.02.

Exam Note: Convert 2% to 0.02 before squaring.

Question 43. The solubility of PbSO4 in 0.01 M Na2SO4 solution is: (Ksp for PbSO4 = 1.25 × 10−9) (a) 1.25 × 10−7 mol L−1 (b) 1.25 × 10−9 mol L−1 (c) 1.25 × 10−10 mol L−1 (d) 1.25 × 10−18 mol L−1

Solution. Answer (from key): (a) 1.25 × 10−7 mol L−1. [SO42−] ≈ 0.01 M, so S = Ksp/0.01 = 1.25 × 10−9/10−2 = 1.25 × 10−7 mol L−1.

Teacher's Note: Common ion sulphate fixes S = Ksp/0.01.

Exam Note: Divide Ksp by 0.01.

Question 44. The value of Ksp for HgCl2 is 4 × 10−15. The concentration of Cl− ion in its aqueous solution at saturation point is: (a) 1 × 10−5 M (b) 4 × 10−15 M (c) 8 × 10−15 M (d) 2 × 10−5 M

Solution. Answer (from key): (d) 2 × 10−5 M. Ksp = 4S3 gives S = 10−5 M; [Cl−] = 2S = 2 × 10−5 M.

Teacher's Note: Chloride is 2S, not S.

Exam Note: Report [Cl−] = 2S.

Question 45. If the solubility of PbBr2 is 'S' gram mol per litre, considering 80% ionisation, its ionic product is: (a) 2S3 (b) 4S2 (c) 4S3 (d) 1S4

Solution. Answer (from key): (a) 2S3. With 80% ionisation [Pb2+] = 0.8S and [Br−] = 1.6S. Ionic product = 0.8S × (1.6S)2 = 2.05S3 ≈ 2S3.

Teacher's Note: Scale ions by 0.8: 0.8S and 1.6S.

Exam Note: Not 4S3 since only 80% ionised.

Question 46. If the solubility of M3N2 is 'S' g mol L−1, its solubility product is: (a) 2S3 (b) 8S4 (c) 108S5 (d) 27S3

Solution. Answer (from key): (c) 108S5. M3N2 ⇌ 3M2+ + 2N3−: Ksp = (3S)3(2S)2 = 27 × 4 S5 = 108S5.

Teacher's Note: Coefficients become powers: (3S)3(2S)2.

Exam Note: Multiply 27 × 4 = 108.

Question 47. At 30 °C, the solubility of Ag2CO3 (Ksp = 8 × 10−12) would be greatest in one litre of: (a) 0.05 M Na2CO3 (b) 0.05 M AgNO3 (c) pure water (d) 0.05 M NH3

Solution. Answer (from key): (d) 0.05 M NH3. Na2CO3 and AgNO3 supply common ions and lower solubility; NH3 forms the complex [Ag(NH3)2]+, removing Ag+ and raising solubility.

Teacher's Note: Complex formation raises solubility; common ions lower it.

Exam Note: Ammonia complexes Ag+.

Question 48. The following equilibrium exists in aqueous solution: CH3COOH ⇌ H+ + CH3COO−. If dilute HCl is added: (a) the equilibrium constant will increase (b) the equilibrium constant will decrease (c) acetate ion concentration will increase (d) acetate ion concentration will decrease

Solution. Answer (from key): (d) acetate ion concentration will decrease. Added H+ shifts the equilibrium left, so [CH3COO−] decreases. The equilibrium constant depends only on temperature.

Teacher's Note: Le Chatelier: extra H+ shifts left; K unchanged.

Exam Note: K changes only with temperature.

Question 49. According to Arrhenius concept, base is a substance that: (a) gives H+ ions in solution (b) gives OH− ions in solution (c) accepts electrons (d) donates electrons

Solution. Answer (from key): (b) gives OH− ions in solution. Arrhenius defined a base as a substance that gives OH− ions in aqueous solution.

Teacher's Note: Arrhenius base gives OH− in water.

Exam Note: State each theory's own definition.

Question 50. According to Bronsted-Lowry concept an acid is a substance which: (a) accepts proton (b) gives an electron pair (c) gives proton (d) combines with H3O+ ions

Solution. Answer (from key): (c) gives proton. A Bronsted-Lowry acid is a proton donor.

Teacher's Note: Acid is proton donor, base is proton acceptor.

Exam Note: Proton donor, not acceptor.

Question 51. According to Lewis concept, a base is a substance which: (a) donates an electron pair (b) accepts an electron pair (c) produces hydronium ions (d) combines with OH− ions

Solution. Answer (from key): (a) donates an electron pair. A Lewis base is an electron-pair donor.

Teacher's Note: Lewis base donates an electron pair.

Exam Note: Lewis acid accepts; base donates.

Question 52. The strength of the acid depends on the: (a) number of hydrogen atoms present in the molecule (b) oxygen content (c) density (d) concentration of hydrogen ions furnished by ionisation

Solution. Answer (from key): (d) concentration of hydrogen ions furnished by ionisation. Acid strength is determined by the extent of ionisation, i.e. the H+ it furnishes.

Teacher's Note: Strength means extent of H+ release.

Exam Note: Not the number of hydrogens present.

Question 53. Cl− ion is the conjugate base of: (a) HCl (b) HOCl (c) HClO3 (d) HClO4

Solution. Answer (from key): (a) HCl. Removing H+ from HCl gives Cl−, so Cl− is the conjugate base of HCl.

Teacher's Note: Conjugate base = acid minus one proton.

Exam Note: Subtract H+ from the acid.

Question 54. Which one of the following is the strongest acid? (a) CH3COOH (b) CH2ClCOOH (c) CHCl2COOH (d) CCl3COOH

Solution. Answer (from key): (d) CCl3COOH. Each Cl atom exerts a −I effect and stabilises the carboxylate ion; three Cl atoms make CCl3COOH the strongest.

Teacher's Note: More electron-withdrawing Cl atoms stabilise the anion, strengthening the acid.

Exam Note: Count the Cl atoms: inductive effect.

Question 55. Number of H+ ions present in 250 mL of lemon juice of pH = 3 is: (a) 1.506 × 1022 (b) 1.506 × 1023 (c) 1.506 × 1020 (d) 3.012 × 1021 (e) 2.008 × 1023 [PMT (Kerala) 2008]

Solution. [H+] = 10−3 M. Number of moles of H+ ions in 250 mL = (10−3/4) × 6.023 × 1023 = 1.506 × 1020. Answer: (c).

Teacher's Note: Convert pH to concentration, then to moles in the given volume, then multiply by Avogadro's number.

Exam Note: Remember to scale by volume (0.25 L).

Question 56. Conjugate acid of OH− base is: (a) H2 (b) H2O (c) H+ (d) H3O+

Solution. Answer (from key): (b) H2O. OH− + H+ → H2O, so H2O is the conjugate acid.

Teacher's Note: Add one proton to the base.

Exam Note: Add H+ to the base.

Question 57. Which among the following qualifies as a Lewis acid? (a) NaF (b) NaCl (c) BF3 (d) MgCl2

Solution. Answer (from key): (c) BF3. BF3 has an incomplete octet (6 electrons on B) and accepts an electron pair.

Teacher's Note: Electron-deficient boron accepts a lone pair.

Exam Note: Incomplete octet identifies a Lewis acid.

Question 58. Which of the following will qualify as Lewis base? (a) BCl3 (b) CH4 (c) Cl2 (d) NH3

Solution. Answer (from key): (d) NH3. NH3 has a lone pair on N which it can donate.

Teacher's Note: Lone pair on nitrogen makes NH3 a donor.

Exam Note: Look for a donatable lone pair.

Question 59. NH4+ ion in an aqueous solution will behave as: (a) a base (b) an acid (c) both acid and base (d) neutral

Solution. Answer (from key): (b) an acid. NH4+ donates a proton: NH4+ ⇌ NH3 + H+, so it is an acid.

Teacher's Note: It donates a proton to give NH3.

Exam Note: Conjugate acid of weak base NH3.

Question 60. In the dissociation of bicarbonate ion, the conjugate base involved is: (a) CO32− (b) CO2 (c) H2CO3 (d) CO

Solution. Answer (from key): (a) CO32−. HCO3− ⇌ H+ + CO32−; the conjugate base of HCO3− is CO32−.

Teacher's Note: Dissociation as an acid loses H+ to give CO32−.

Exam Note: H2CO3 would be the conjugate acid.

Question 61. Which one of the following is an acidic salt? (a) NaHSO4 (b) Na2SO4 (c) Na2SO3 (d) Na2SO4

Solution. Answer (from key): (a) NaHSO4. NaHSO4 still contains a replaceable hydrogen (HSO4−), so it is an acidic salt.

Teacher's Note: Acidic salt retains replaceable H from a polybasic acid.

Exam Note: Look for a remaining ionisable H.

Question 62. The conjugate acid of NH2− is: (a) NH4+ (b) NH3 (c) NH2OH (d) N2H4

Solution. Answer (from key): (b) NH3. NH2− + H+ → NH3.

Teacher's Note: Add one H+ to the amide ion.

Exam Note: Add exactly one proton.

Question 63. The correct increasing order of strengths of the following acids is: (a) H2SO4, CH3COOH, H2CO3 (b) CH3COOH, H2SO4, H2CO3 (c) H2CO3, CH3COOH, H2SO4 (d) CH3COOH, H2CO3, H2SO4

Solution. Answer (from key): (c) H2CO3, CH3COOH, H2SO4. Ka: H2CO3 (4.3 × 10−7) < CH3COOH (1.8 × 10−5) < H2SO4 (strong).

Teacher's Note: Carbonic acid is weaker than acetic acid; sulphuric is strong.

Exam Note: Order the Ka values.

Question 64. The decreasing order of strength of the following bases is: (a) Cl−, CH3COO−, NH3 (b) CH3COO−, NH3, Cl− (c) CH3COO−, Cl−, NH3 (d) NH3, CH3COO−, Cl−

Solution. Answer (from key): (d) NH3, CH3COO−, Cl−. Kb: NH3 (1.8 × 10−5) > CH3COO− (5.6 × 10−10) > Cl− (conjugate base of a strong acid, negligible).

Teacher's Note: Weaker conjugate acid gives stronger base: NH4+ < CH3COOH < HCl.

Exam Note: Cl− is essentially non-basic.

Question 65. Which one of the following does not act as a Bronsted acid? (a) NH4+ (b) HCO3− (c) HSO3− (d) CH3COO−

Solution. Answer (from key): (d) CH3COO−. CH3COO− has no proton to donate, so it acts only as a base; the others can donate a proton.

Teacher's Note: A Bronsted acid must hold a donatable proton.

Exam Note: No H on acetate's oxygen anion.

Question 66. Of the given anions, the strongest Bronsted base is: (a) ClO− (b) ClO2− (c) ClO3− (d) ClO4−

Solution. Answer (from key): (a) ClO−. The weakest conjugate acid gives the strongest base. HOCl is the weakest of the chlorine oxyacids, so ClO− is the strongest base.

Teacher's Note: Acid strength HClO4 > HClO3 > HClO2 > HOCl.

Exam Note: Weak acid, strong conjugate base.

Question 67. The compound that is not a Lewis acid is: (a) BaCl2 (b) AlCl3 (c) BCl3 (d) SnCl4

Solution. Answer (from key): (a) BaCl2. AlCl3 and BCl3 are electron deficient and SnCl4 can accept electrons into vacant d-orbitals, whereas BaCl2 is an ionic salt without an electron-pair acceptor site.

Teacher's Note: Electron-deficient or vacant-orbital species accept pairs.

Exam Note: BaCl2 is ionic, not an acceptor.

Question 68. The dissociation constants of two acids HA1 and HA2 are 3.0 × 10−4 and 1.8 × 10−5 respectively. The relative strengths of the acids will be: (a) 1 : 4 (b) 4 : 1 (c) 1 : 16 (d) 16 : 1

Solution. Answer (from key): (b) 4 : 1. Relative strength = √(K1/K2) = √(3.0 × 10−4/1.8 × 10−5) = √16.7 ≈ 4, so 4 : 1.

Teacher's Note: Relative strength is the ratio of √Ka, not of Ka.

Exam Note: Take the square root of the K ratio.

Question 69. In the acid-base relation, HCl + CH3COOH ⇌ Cl− + CH3COOH2+, the conjugate acid of acetic acid is: (a) Cl− (b) HCl (c) CH3COOH2+ (d) H3O+

Solution. Answer (from key): (c) CH3COOH2+. Acetic acid accepts a proton from HCl to give CH3COOH2+, its conjugate acid.

Teacher's Note: Species formed by proton gain is the conjugate acid.

Exam Note: Here acetic acid acts as a base.

Question 70. The numerical value of negative power to which 10 must be raised in order to express hydrogen ion concentration, is equal to: (a) strength of the solution (b) pH of the solution (c) degree of hydrolysis (d) solubility product of the electrolyte

Solution. Answer (from key): (b) pH of the solution. [H+] = 10−pH, so the negative power is the pH.

Teacher's Note: This is the definition of pH.

Exam Note: Define pH = −log[H+].

Question 71. Which one of the following solutions will have pH close to unity? (a) 100 mL of M/10 HCl + 100 mL of M/10 NaOH (b) 55 mL of M/10 HCl + 45 mL of M/10 NaOH (c) 10 mL of M/10 HCl + 90 mL of M/10 NaOH (d) 75 mL of M/5 HCl + 25 mL of M/5 NaOH (e) 50 mL of M/5 HCl + 50 mL of M/5 NaOH [IIT 1992; PMT (Kerala) 2008]

Solution. Use MmixVmix = MHClVHCl − MNaOHVNaOH for the excess acid. For (d): Mmix × 100 = (1/5)×75 − (1/5)×25 = 10, so Mmix = 0.1 M and [H+] = 0.1 M, pH = 1. (a) and (e) are exactly neutral (pH 7), (b) gives [H+] = 0.01 M (pH 2) and (c) is basic. Answer: (d). Corrected: the printed hint adds the two terms and gets 0.2 M (pH 0.7); the correct neutralisation uses subtraction, giving pH = 1 exactly, but the option is the same.

Teacher's Note: Subtract moles of base from moles of acid before dividing by total volume.

Exam Note: Neutralisation means subtract, never add, the base moles.

Question 72. 0.1 M acetic acid solution is titrated against 0.1 M NaOH solution. What would be the difference in pH between 1/4 and 3/4 stages of neutralisation of acid? (a) 2 log 3/4 (b) 2 log 1/4 (c) log 1/3 (d) 2 log 3

Solution. Answer (from key): (d) 2 log 3. pH = pKa + log([salt]/[acid]). At 1/4: log(1/3); at 3/4: log(3/1). Difference = log 3 − log(1/3) = 2 log 3.

Teacher's Note: Henderson equation at ratios 1:3 and 3:1.

Exam Note: pKa cancels in the difference.

Question 73. The pKa of acetylsalicylic acid (aspirin) is 3.5. The pH of gastric juice in human stomach is about 2–3 and the pH in the small intestine is about 8. Aspirin will be: (a) unionised in the small intestine and in the stomach (b) completely ionised in the small intestine and in the stomach (c) ionised in the stomach and almost unionised in the small intestine (d) ionised in the small intestine and almost unionised in the stomach

Solution. Answer (from key): (d) ionised in the small intestine and almost unionised in the stomach. In the stomach pH < pKa, so the acid stays mostly unionised. In the intestine pH (8) > pKa (3.5), so it is mostly ionised.

Teacher's Note: Compare pH with pKa: below pKa acid form dominates.

Exam Note: pH above pKa means ionised.

Question 74. When 10−6 mole of a monobasic strong acid is dissolved in one litre of solvent, the pH of the solution is: (a) 6 (b) 7 (c) less than 6 (d) more than 7

Solution. Answer (from key): (a) 6. [H+] = 10−6 M; water contributes slightly, giving [H+] ≈ 1.01 × 10−6 M and pH ≈ 5.996, i.e. 6 to the nearest value.

Teacher's Note: 10−6 M is close to water's own H+, but pH is still about 6.

Exam Note: The tiny water correction does not change the answer.

Question 75. When pH of a solution is 2, the hydrogen ion concentration in mol litre−1 is: (a) 1 × 10−12 (b) 1 × 10−2 (c) 1 × 10−7 (d) 1 × 10−4

Solution. Answer (from key): (b) 1 × 10−2. [H+] = 10−pH = 10−2 mol L−1.

Teacher's Note: Invert the pH definition.

Exam Note: [H+] = 10−pH.

Question 76. At 90 °C, pure water has [H3O+] = 10−6 mol litre−1. The value of Kw at 90 °C is: [MLNR 1990] (a) 10−6 (b) 10−12 (c) 10−14 (d) 10−8

Solution. Answer (from key): (b) 10−12. In pure water [H+] = [OH−] = 10−6, so Kw = 10−6 × 10−6 = 10−12.

Teacher's Note: Pure water has equal H+ and OH−; square the value.

Exam Note: Kw rises with temperature.

Question 77. The pH of 10−8 molar solution of HCl in water is: [CPMT 1990; MLNR 1992] (a) 8 (b) −8 (c) between 7 and 8 (d) between 6 and 7

Solution. Answer (from key): (d) between 6 and 7. An acid cannot make the solution basic. [H+] = 10−8 + 10−7 (from water) ≈ 1.1 × 10−7 M, so pH ≈ 6.96, between 6 and 7.

Teacher's Note: Include H+ from water at such low acid concentration.

Exam Note: Acid never gives pH above 7.

Question 78. When pH of 0.001 M solution of HCl is: (a) 1.0 (b) 3 (c) 4.0 (d) 5.0

Solution. Answer (from key): (b) 3. HCl is strong: [H+] = 10−3 M, so pH = 3.

Teacher's Note: Strong acid: pH = −log C.

Exam Note: pH = −log 10−3 = 3.

Question 79. The pH of a solution containing 0.1 N NaOH solution is: (a) 1 (b) 10−1 (c) 13 (d) 10−13

Solution. Answer (from key): (c) 13. [OH−] = 0.1 M, pOH = 1, so pH = 14 − 1 = 13.

Teacher's Note: Strong base: find pOH then subtract from 14.

Exam Note: pH is 13, not 10−13.

Question 80. When 0.4 g of NaOH is dissolved in one litre of solution, the pH of the solution is: (a) 12 (b) 2 (c) 6 (d) 10

Solution. Answer (from key): (a) 12. Moles of NaOH = 0.4/40 = 0.01 mol, so [OH−] = 10−2 M, pOH = 2 and pH = 12.

Teacher's Note: Mass to moles (M = 40), then pOH, then pH.

Exam Note: Molar mass of NaOH is 40.

Question 81. The pH of an aqueous solution of a 0.1 M solution of a weak monoprotic acid which is 1% ionised is: (a) 1 (b) 2 (c) 3 (d) 11

Solution. Answer (from key): (c) 3. [H+] = Cα = 0.1 × 0.01 = 10−3 M, so pH = 3.

Teacher's Note: [H+] = Cα for a weak acid.

Exam Note: 1% means α = 0.01.

Question 82. The pH of a 0.002 N acetic acid solution if it is 2.3% ionised at this dilution is: (log 4.6 = 0.6628) (a) 4.3372 (b) 0.4337 (c) 3.4337 (d) 0.6628

Solution. Answer (from key): (a) 4.3372. [H+] = 0.002 × 0.023 = 4.6 × 10−5 M. pH = 5 − log 4.6 = 5 − 0.6628 = 4.3372.

Teacher's Note: Compute [H+] = Cα, then take the negative log.

Exam Note: Rewrite 4.6 × 10−5 before taking log.

Question 83. 0.1 M HCl and 0.1 M H2SO4 each of volume 2 mL are mixed and the volume is made up to 6 mL by adding 2 mL of 0.01 N NaCl solution. The pH of the resulting mixture is: (a) 1.17 (b) 1.0 (c) 0.3 (d) log 2 − log 3

Solution. Millimoles of H+ = 0.1 × 2 + 0.1 × 2 × 2 = 0.6. [H+] = 0.6/6 = 0.1 M. pH = −log 0.1 = 1. NaCl is neutral and only dilutes. Answer: (b).

Teacher's Note: H2SO4 gives two H+ per molecule; add all H+ moles, divide by final volume.

Exam Note: Count both protons of H2SO4.

Question 84. The pH and pOH of 0.1 M aqueous solution of HNO3 are: (a) 0, 14 (b) 14, 0 (c) 13, 1 (d) 1, 13

Solution. Answer (from key): (d) 1, 13. HNO3 is a strong acid: [H+] = 0.1 M, so pH = 1 and pOH = 14 − 1 = 13.

Teacher's Note: Strong acid: pH = 1 and pOH = 13.

Exam Note: pH + pOH = 14.

Question 85. The pH of a neutral solution at 50 °C is: (Kw = 10−13.26 at 50 °C) (a) 7 (b) 6.0 (c) 7.23 (d) 6.63

Solution. Answer (from key): (d) 6.63. For a neutral solution [H+] = √Kw = 10−6.63, so pH = 6.63.

Teacher's Note: Neutral: pH = ½ pKw = 13.26/2.

Exam Note: Neutral pH is 7 only at 25 °C.

Question 86. The pH of 0.005 molar aqueous solution of sulphuric acid is approximately: (a) 0.005 (b) 1 (c) 0.1 (d) 2.0

Solution. Answer (from key): (d) 2.0. H2SO4 gives 2 H+: [H+] = 2 × 0.005 = 0.01 M, so pH = 2.

Teacher's Note: Dibasic strong acid doubles [H+].

Exam Note: Count both protons.

Question 87. 20 mL 0.1 N HCl is mixed with 20 mL of 0.1 N KOH solution; the pH of the solution will be: (a) 0 (b) 2 (c) 7 (d) 9

Solution. Answer (from key): (c) 7. Equal equivalents of strong acid and strong base neutralise exactly, giving a neutral salt solution (KCl) with pH = 7.

Teacher's Note: Equal equivalents of strong acid and base: neutral.

Exam Note: pH 7 at 25 °C.

Question 88. When the pH changes from 4 to 2, the hydrogen ion concentration will increase by a factor: (a) 2 (b) 1/2 (c) 102 (d) 100.5

Solution. Answer (from key): (c) 102. [H+] changes from 10−4 to 10−2 M, i.e. by a factor of 102.

Teacher's Note: Each pH unit is a tenfold change in [H+].

Exam Note: Two pH units give a factor of 100.

Question 89. 100 mL of 0.2 N HCl is added to 100 mL of 0.18 N NaOH, the whole volume is made one litre. The pH of the resulting solution is: (a) 1 (b) 2 (c) 3 (d) 4

Solution. Answer (from key): (b) 2. Excess H+ = (0.2 × 100) − (0.18 × 100) = 2 meq in 1000 mL, so [H+] = 2 × 10−3 M and pH = 2.70. Answer (from key): (b) 2. Needs human check: the exact value 2.7 lies between options (b) and (c); the key's (b) corresponds to the integer part of 2.7.

Teacher's Note: Subtract base meq from acid meq, divide by final 1 L.

Exam Note: Dilute to 1 L before taking −log.

Question 90. 10 mL of 0.1 N HCl is added to 990 mL solution of NaCl. The pH of the resulting solution is: (a) zero (b) 3 (c) 7 (d) 10

Solution. Answer (from key): (b) 3. Moles of H+ = 0.1 × 10 mmol = 1 mmol in 1000 mL: [H+] = 10−3 M, so pH = 3. NaCl is neutral.

Teacher's Note: Dilute 10 mL to 1 L: factor of 100.

Exam Note: NaCl only dilutes.

Question 91. Solutions with reserve acidity and alkalinity are called: (a) isohydric solutions (b) true solutions (c) normal solutions (d) buffer solutions

Solution. Answer (from key): (d) buffer solutions. A buffer solution has reserve acidity and alkalinity, resisting changes in pH on adding small amounts of acid or base.

Teacher's Note: Reserve acidity and alkalinity define a buffer.

Exam Note: Recall buffer definition.

Question 92. A solution which is resistant to changes of pH on dilution, or addition of small amounts of an acid or a base is known as: (a) buffer solution (b) true solution (c) isohydric solution (d) ideal solution

Solution. Answer (from key): (a) buffer solution. This is the definition of a buffer solution.

Teacher's Note: Resists pH change: buffer.

Exam Note: Definition of buffer.

Question 93. Which of the following is a buffer solution? (a) CH3COOH + CH3COONa (b) NaCl + NaOH (c) HCl + NH4Cl (d) CH3COOH + HCl

Solution. Answer (from key): (a) CH3COOH + CH3COONa. A weak acid with its salt of a strong base (acetic acid + sodium acetate) forms an acidic buffer.

Teacher's Note: Weak acid plus its conjugate base salt.

Exam Note: Strong acid or base cannot buffer.

Question 94. The hydrogen ion concentration of a buffer solution consisting of a weak acid and its sodium salt is given by: (a) [H+] = Ka [Acid]/[Salt] (b) [H+] = Ka [Salt] (c) [H+] = Ka [Acid] (d) [H+] = Ka [Salt]/[Acid]

Solution. Answer (from key): (a) [H+] = Ka [Acid]/[Salt]. From Ka = [H+][A−]/[HA] with [A−] ≈ [Salt]: [H+] = Ka[Acid]/[Salt].

Teacher's Note: Rearrange Ka: acid goes in the numerator.

Exam Note: Salt sits in the denominator.

Question 95. When a buffer solution of CH3COOH and CH3COONa is diluted with water: (a) CH3COO− ion concentration increases (b) [H+] ion concentration increases (c) OH− ion concentration increases (d) H+ ion concentration does not change

Solution. Answer (from key): (d) H+ ion concentration does not change. The ratio [Salt]/[Acid] is unchanged on dilution, so [H+] = Ka[Acid]/[Salt] stays constant.

Teacher's Note: pH depends on the salt : acid ratio, not on concentration.

Exam Note: Both terms dilute equally.

Question 96. In a buffer solution consisting of a weak acid and its salt, the ratio of concentration of salt to acid is increased tenfold; then the pH of the solution will: (a) increase by one (b) increase tenfold (c) decrease by one (d) decrease tenfold

Solution. Answer (from key): (a) increase by one. pH = pKa + log([Salt]/[Acid]); a tenfold increase in the ratio adds log 10 = 1.

Teacher's Note: log 10 = 1 unit added to pH.

Exam Note: Henderson equation: one unit change.

Question 97. Acetic acid and propionic acid have Ka values 1.75 × 10−5 and 1.3 × 10−5 respectively at a certain temperature. An equimolar solution of a mixture of the two acids is partially neutralised by NaOH. How is the ratio of the contents of acetate and propionate ions related to the Ka values and the molarity? (a) [α/(1 − α)] = (1.75/1.3) × [β/(1 − β)], where α and β are ionised fractions of the acids (b) The ratio is unrelated to the Ka values (c) The ratio is unrelated to the molarity (d) The ratio is unrelated to the pH of the solution

Solution. Answer (from key): (a) [α/(1 − α)] = (1.75/1.3) × [β/(1 − β)], where α and β are ionised fractions of the acids. For each acid [A−]/[HA] = Ka/[H+] with the same [H+], so α/(1 − α) ÷ β/(1 − β) = Ka1/Ka2 = 1.75/1.3.

Teacher's Note: Same [H+] means ionised ratios scale with Ka.

Exam Note: Both acids share one [H+].

Question 98. A weak acid of dissociation constant 10−5 is being titrated against aqueous NaOH solution. The pH at the point of one-third neutralisation of the acid will be: (a) 5 + log 2 − log 3 (b) 5 − log 2 (c) 5 − log 3 (d) 5 − log 6 [JEE (WB) 2010]

Solution. pKa = −log 10−5 = 5. At one-third neutralisation [salt] = 1/3 and [acid] = 2/3 (of the original). pH = pKa + log([salt]/[acid]) = 5 + log[(1/3)/(2/3)] = 5 − log 2. Answer: (b).

Teacher's Note: Buffer region: use Henderson equation with salt : acid = 1 : 2.

Exam Note: Henderson equation; ratio salt/acid = 1/2.

Question 99. Which of the following salts when dissolved in water will hydrolyse? (a) NaCl (b) KCl (c) NH4Cl (d) Na2SO4

Solution. Answer (from key): (c) NH4Cl. NH4Cl is the salt of a weak base and a strong acid, so NH4+ hydrolyses. The others are salts of strong acid and strong base.

Teacher's Note: Hydrolysis needs a weak acid or weak base parent.

Exam Note: Strong-strong salts never hydrolyse.

Question 100. The aqueous solution of AlCl3 is acidic due to: (a) cation hydrolysis (b) anion hydrolysis (c) hydrolysis of both the ions (d) dissociation

Solution. Answer (from key): (a) cation hydrolysis. Al3+ (from the weak base Al(OH)3) hydrolyses, releasing H+; Cl− does not hydrolyse.

Teacher's Note: Cation of weak base hydrolyses: acidic solution.

Exam Note: Identify which ion hydrolyses.

Question 101. A certain buffer solution contains equal concentration of X− and HX. The Kb for X− is 10−10. The pH of the buffer is: (a) 4 (b) 7 (c) 10 (d) 14

Solution. Answer (from key): (a) 4. Ka = Kw/Kb = 10−14/10−10 = 10−4. With equal [X−] and [HX], pH = pKa = 4.

Teacher's Note: Convert Kb to Ka; equal concentrations give pH = pKa.

Exam Note: Do not use Kb directly for pH.

Question 102. An acidic buffer solution can be prepared by mixing the solutions of: (a) sodium acetate and acetic acid (b) ammonium chloride and ammonium hydroxide (c) sulphuric acid and sodium hydroxide (d) sodium chloride and sodium hydroxide

Solution. Answer (from key): (a) sodium acetate and acetic acid. An acidic buffer is a weak acid plus its salt with a strong base: CH3COOH + CH3COONa.

Teacher's Note: Weak acid plus its salt gives an acidic buffer.

Exam Note: The NH4OH pair is a basic buffer.

Question 103. The compound whose aqueous solution has highest pH, is: (a) NaCl (b) NH4Cl (c) CH3COONH4 (d) Na2CO3

Solution. Answer (from key): (d) Na2CO3. Na2CO3 is the salt of a weak acid and a strong base: CO32− hydrolyses strongly to give a basic solution; NaCl is neutral, NH4Cl acidic and CH3COONH4 about neutral.

Teacher's Note: Weak acid plus strong base salt: basic.

Exam Note: Carbonate hydrolyses more than other options.

Question 104. The compound whose 0.1 M solution is basic, is: (a) ammonium chloride (b) ammonium acetate (c) ammonium sulphate (d) sodium acetate

Solution. Answer (from key): (d) sodium acetate. Sodium acetate is the salt of a weak acid and a strong base; CH3COO− hydrolyses to give OH−. The ammonium salts are acidic or neutral.

Teacher's Note: Salt of weak acid and strong base gives a basic solution.

Exam Note: Ammonium acetate is nearly neutral.

Question 105. Aqueous solution of copper sulphate: (a) turns blue litmus red (b) turns red litmus blue (c) does not affect litmus (d) affects both red and blue litmus

Solution. Answer (from key): (a) turns blue litmus red. CuSO4 is the salt of a weak base Cu(OH)2 and a strong acid H2SO4; Cu2+ hydrolyses giving an acidic solution, which turns blue litmus red.

Teacher's Note: Weak base plus strong acid gives acidic solution.

Exam Note: Acidic solution reddens blue litmus.

Question 106. When an equivalent of a strong acid is added to one equivalent of a weak base, the resulting solution will be: (a) neutral (b) acidic (c) alkaline (d) coloured

Solution. Answer (from key): (b) acidic. The salt formed (conjugate acid of the weak base) hydrolyses to give H+, so the solution is acidic.

Teacher's Note: Equivalence of strong acid with weak base gives acidic salt solution.

Exam Note: Equivalence point is not pH 7 here.

Question 107. Indicators used in acid-base titrations are: (a) strong organic acids (b) strong organic bases (c) weak organic acids or weak organic bases (d) non-electrolytes

Solution. Answer (from key): (c) weak organic acids or weak organic bases. Indicators are weak organic acids or bases whose ionised and unionised forms have different colours.

Teacher's Note: Indicator is a weak acid or base with two coloured forms.

Exam Note: Strong acids would not change colour gradually.

Question 108. For the titration between oxalic acid and sodium hydroxide, the indicator used is: (a) potassium permanganate (b) phenolphthalein (c) litmus (d) methyl orange

Solution. Answer (from key): (b) phenolphthalein. Oxalic acid (weak) with NaOH (strong) gives a basic end point (pH about 8–10), suited to phenolphthalein.

Teacher's Note: Weak acid with strong base needs a basic-range indicator.

Exam Note: Phenolphthalein: pH range 8–9.8.

Question 109. Phenolphthalein gives a pink colour in alkaline medium due to the fact that: (a) it is a coloured compound (b) it ionises to give coloured ions (c) it is decomposed by alkali (d) it forms a complex compound with alkali

Solution. Answer (from key): (b) it ionises to give coloured ions. Phenolphthalein is a weak acid (HPh, colourless); in alkali it ionises to give the pink Ph− ion.

Teacher's Note: The coloured ion Ph− forms in alkali.

Exam Note: Colour change comes from ionisation.

Question 110. Which is the best choice for weak base-strong acid titration? [JEE (Orissa) 2008] (a) Methyl red (b) Litmus (c) Phenol red (d) Phenolphthalein

Solution. Answer (from key): (a) Methyl red. The equivalence point is acidic (pH below 7), so use methyl red (pH range about 4.2–6.3).

Teacher's Note: Acidic end point needs an acidic-range indicator.

Exam Note: Phenolphthalein suits weak acid and strong base.

Question 111. Water is: (a) a base (b) an acid (c) non-electrolyte (d) an amphiprotic molecule

Solution. Answer (from key): (d) an amphiprotic molecule. Water can donate a proton to give OH− and accept a proton to give H3O+, so it is amphiprotic.

Teacher's Note: Water both donates and accepts protons.

Exam Note: Amphiprotic: acts as acid and base.

Question 112. An aqueous solution, whose pH is zero, is: (a) alkaline (b) neutral (c) acidic (d) amphoteric

Solution. Answer (from key): (c) acidic. pH = 0 means [H+] = 1 M, a strongly acidic solution.

Teacher's Note: pH 0 is [H+] = 1 M.

Exam Note: Neutral is pH 7 only at 25 °C.

Question 113. 0.1 N solution of Na2CO3 is being titrated with 0.1 N HCl. The best indicator to be used is: (a) potassium ferricyanide (b) phenolphthalein (c) methyl red (d) litmus

Solution. Answer (from key): (c) methyl red. Complete neutralisation of Na2CO3 with HCl gives H2CO3, so the end point is acidic and methyl red (or methyl orange) is suitable.

Teacher's Note: Strong acid versus weak base: acidic end point.

Exam Note: Phenolphthalein only sees half neutralisation.

Question 114. In the reaction, AlCl3 + Cl− = AlCl4−, AlCl3 can be classified as: (a) a base (b) an acid (c) a salt (d) none of these

Solution. Answer (from key): (b) an acid. AlCl3 accepts an electron pair from Cl−, so it acts as a Lewis acid.

Teacher's Note: Electron-pair acceptor is a Lewis acid.

Exam Note: Cl− donates, AlCl3 accepts.

Question 115. Sulphuric acid is a dibasic acid. Hence, it forms: (a) acidic salt (b) basic and acidic salt (c) acidic and normal salt (d) double salt

Solution. Answer (from key): (c) acidic and normal salt. With two replaceable H atoms it can give an acidic salt (NaHSO4) and a normal salt (Na2SO4).

Teacher's Note: Two replaceable H: one gives acidic, both gives normal salt.

Exam Note: Basicity decides the possible salts.

Question 116. The buffer solutions play an important role in: (a) increasing the pH value (b) decreasing the pH value (c) keeping the pH constant (d) none of these

Solution. Answer (from key): (c) keeping the pH constant. Buffers resist changes in pH on adding small amounts of acid or base.

Teacher's Note: Buffers keep pH nearly constant.

Exam Note: Resistance to pH change.

Question 117. Which of the following will occur if 1.0 M solution of a weak acid is diluted to 0.01 M at constant temperature? [AIIMS 1993] (a) [H+] will decrease to 0.01 M (b) pH will decrease by 2 units (c) Ka will increase (d) Percentage ionisation will increase

Solution. Answer (from key): (d) Percentage ionisation will increase. By Ostwald's law α = √(Ka/C) increases on dilution (tenfold here). Ka is constant at fixed temperature, and [H+] falls by only a factor of 10 while pH rises.

Teacher's Note: α rises as √(1/C); Ka is constant.

Exam Note: Ka depends only on temperature.

Question 118. Which one of the following indicators works in the pH range 8 – 9.8? (a) Litmus (b) Phenolphthalein (c) Methyl red (d) Methyl orange

Solution. Answer (from key): (b) Phenolphthalein. Phenolphthalein changes colour over pH 8.0–9.8.

Teacher's Note: Phenolphthalein range is 8 to 9.8.

Exam Note: Memorise indicator ranges.

Question 119. What is [OH−] in the final solution prepared by mixing 20 mL of 0.05 M HCl with 30 mL of 0.10 M Ba(OH)2? [CBSE (PMT) 2009] (a) 0.12 M (b) 0.10 M (c) 0.40 M (d) 0.005 M

Solution. nH+ = MV/1000 = 0.05 × 20/1000 = 10−3 mol. nOH− = 2 × nBa(OH)2 = 2 × 0.1 × 30/1000 = 6 × 10−3 mol. Remaining OH− = 6 × 10−3 − 10−3 = 5 × 10−3 mol. [OH−] = (5 × 10−3/50) × 1000 = 0.1 M. Answer: (b).

Teacher's Note: Ba(OH)2 supplies two OH−; subtract acid moles, divide by total 50 mL.

Exam Note: Use total volume 50 mL, not 30 mL.

Question 120. The following reaction is known to occur in the human body: CO2 + H2O ⇌ H2CO3 ⇌ H+ + HCO3−. If CO2 escapes from the system: (a) pH will decrease (b) H+ ion concentration will decrease (c) H2CO3 concentration will be unaltered (d) the forward reaction will be promoted

Solution. Answer (from key): (b) H+ ion concentration will decrease. Loss of CO2 shifts the equilibria to the left (Le Chatelier), so H2CO3 and [H+] decrease and pH increases.

Teacher's Note: Removing CO2 shifts left, lowering H+.

Exam Note: Le Chatelier: product removal shifts reverse.

Question 121. The pH of human blood is about: (a) 5.2 (b) 6.3 (c) 7.4 (d) 8.3

Solution. Answer (from key): (c) 7.4. Blood is buffered at pH about 7.4 (slightly basic) by the H2CO3/HCO3− buffer.

Teacher's Note: Recall: blood pH is about 7.4.

Exam Note: Memorise 7.35–7.45.

Question 122. The dissociation constants of acids HA, HB, HC and HD are 2.6 × 10−3, 5.3 × 10−9, 1.1 × 10−2 and 7.5 × 10−5 respectively. The weakest acid amongst these acids is: (a) HA (b) HB (c) HC (d) HD

Solution. Answer (from key): (b) HB. The weakest acid has the smallest Ka: 5.3 × 10−9 (HB).

Teacher's Note: Smallest Ka is weakest.

Exam Note: Compare exponents first.

Question 123. The addition of sodium carbonate in pure water causes: (a) an increase in the hydrogen ion concentration (b) a decrease in hydroxyl ion concentration (c) no change in pH (d) an increase in pH

Solution. Answer (from key): (d) an increase in pH. CO32− hydrolyses: CO32− + H2O ⇌ HCO3− + OH−, raising [OH−] and pH.

Teacher's Note: Salt of weak acid and strong base raises pH.

Exam Note: Anion hydrolysis releases OH−.

Question 124. The best indicator for titrating HCl against NH4OH is: (a) litmus (b) phenolphthalein (c) phenol red (d) methyl orange

Solution. Answer (from key): (d) methyl orange. Strong acid and weak base give an acidic end point, so methyl orange (pH range 3.1–4.4) is best.

Teacher's Note: Strong acid versus weak base needs methyl orange or methyl red.

Exam Note: Phenolphthalein would give a wrong end point.

Question 125. A buffer solution is used in: (a) preparation of potash alum (b) the removal of PO43− ions (c) increasing the pH value of a solution (d) precipitation of Cr(OH)3 from CrCl3

Solution. Answer (from key): (b) the removal of PO43− ions. In qualitative analysis, PO43− (an interfering radical) is removed using a buffered medium (e.g. CH3COOH/CH3COONa) so that its phosphate precipitates, while buffer keeps pH controlled.

Teacher's Note: Interfering phosphate is removed in a pH-controlled buffer medium.

Exam Note: Buffers are for controlling, not raising, pH.

Question 126. A certain weak acid has a dissociation constant of 1.0 × 10−4. The equilibrium constant for its reaction with a strong base is: (a) 1.0 × 10−4 (b) 1.0 × 10−10 (c) 1.0 × 1010 (d) 1.0 × 10−14

Solution. HA + BOH ⇌ BA + H2O. The equilibrium constant = 1/Kh and Kh = Kw/Ka, so K = Ka/Kw = 10−4/10−14 = 1.0 × 1010. Answer: (c).

Teacher's Note: Neutralisation constant is the reciprocal of hydrolysis constant: Ka/Kw.

Exam Note: K = Ka/Kw for weak acid-strong base.

Question 127. Which one of the following statements is correct? (a) CH3COOH is a weak acid (b) NH4Cl gives an alkaline solution in water (c) CH3COONa gives an acidic solution in water (d) NH4OH is a strong base

Solution. Answer (from key): (a) CH3COOH is a weak acid. Acetic acid ionises only slightly (Ka = 1.8 × 10−5). NH4Cl is acidic, CH3COONa basic and NH4OH a weak base.

Teacher's Note: Check the nature of each salt's parent acid and base.

Exam Note: Reverse the two salts to see the traps.

Question 128. In the hydrolytic equilibrium A− + H2O ⇌ HA + OH−, Ka = 1.0 × 10−5. The degree of hydrolysis of 0.001 M solution of the salt is: (a) 10−3 (b) 10−4 (c) 10−5 (d) 10−6

Solution. Answer (from key): (a) 10−3. Kh = Kw/Ka = 10−14/10−5 = 10−9. h = √(Kh/C) = √(10−9/10−3) = 10−3.

Teacher's Note: Find Kh from Kw/Ka, then h = √(Kh/C).

Exam Note: Use Ka of HA, not Kb.

Question 129. The pH of an aqueous solution of 0.1 M solution of the salt of a weak base (Kb = 1.0 × 10−5) and a strong acid is: (a) 4.5 (b) 5.0 (c) 5.5 (d) 6.0

Solution. First calculate the degree of hydrolysis: α2C = Kh, Kh = Kw/Kb = 10−9, so α = √(10−9/0.1) = 10−4. [H+] = αC = 10−4 × 0.1 = 10−5 M, so pH = 5.0. Answer: (b).

Teacher's Note: Salt of weak base hydrolyses to acidic solution; find α from Kh then [H+] = αC.

Exam Note: pH = ½(pKw − pKb − log C) gives the same.

Question 130. The pH of the solution obtained by mixing equal volumes of the solution of pH = 5 and pH = 3 of the same electrolyte is: (a) 3.3 (b) 4.0 (c) 4.5 (d) 2.0

Solution. [H+] = (10−3 + 10−5)/2 = (100 × 10−5 + 10−5)/2 = 50.5 × 10−5 M, so pH = 5 − log 50.5 = 3.3. Answer: (a).

Teacher's Note: Average the H+ concentrations, never the pH values.

Exam Note: Never average pH; average concentrations.

Question 131. pKa values of four acids are given below at 25 °C. The strongest acid is: [PMT (MP) 1990] (a) 2.0 (b) 2.5 (c) 3.0 (d) 4.0

Solution. Answer (from key): (a) 2.0. The strongest acid has the largest Ka, i.e. the smallest pKa (2.0).

Teacher's Note: Smaller pKa means stronger acid.

Exam Note: pKa = −log Ka reverses the order.

Question 132. The ionisation constant of NH4+ in water is 5.6 × 10−10 at 25 °C. The rate constant of reaction of NH4+ and OH− to form NH3 and H2O at 25 °C is 3.4 × 1010 L mol−1 s−1. The rate constant for proton transfer from water to NH3 is: (a) 6.07 × 105 s−1 (b) 6.07 × 10−10 s−1 (c) 6.07 × 10−5 s−1 (d) 6.07 × 1010 s−1

Solution. Answer (from key): (a) 6.07 × 105 s−1. For NH3 + H2O ⇌ NH4+ + OH−: Kb = kf/kr, with Kb = Kw/Ka = 10−14/5.6 × 10−10 = 1.786 × 10−5. So kf = Kb × kr = 1.786 × 10−5 × 3.4 × 1010 = 6.07 × 105 s−1.

Teacher's Note: Rate constant = Kb times the reverse rate constant.

Exam Note: Check units: s−1 for the pseudo-first-order step.

Question 133. The pH of a soft drink is 3.82. The hydrogen ion concentration will be: (given antilog 0.18 = 1.5) [PET (MP) 1990] (a) 1.96 × 10−2 mol lit−1 (b) 1.96 × 10−5 mol lit−1 (c) 1.5 × 10−4 mol lit−1 (d) 1.5 × 10−2 mol lit−1

Solution. Answer (from key): (c) 1.5 × 10−4 mol lit−1. [H+] = antilog(−3.82) = antilog(0.18 − 4) = 1.5 × 10−4 mol L−1.

Teacher's Note: Write −3.82 as 0.18 − 4, then antilog.

Exam Note: Split into a positive decimal and an integer.

Question 134. 100 mL of 0.1 M HCl is mixed with 100 mL of 0.01 M HCl. The pH of the resulting solution is: (a) 2.0 (b) 1.0 (c) 1.26 (d) none of these

Solution. Answer (from key): (c) 1.26. [H+] = (0.1 × 100 + 0.01 × 100)/200 = 0.055 M, so pH = −log 0.055 = 1.26.

Teacher's Note: Average the H+ moles over the total volume.

Exam Note: Do not average the two pH values.

Question 135. How many times has a solution of pH 2 higher acidity than solution of pH 6? (a) 10,000 (b) 12 (c) 400 (d) 4

Solution. Answer (from key): (a) 10,000. [H+] ratio = 10−2/10−6 = 104 = 10,000.

Teacher's Note: Each pH unit is a factor of 10; four units apart.

Exam Note: Ratio is 10Δ pH.

Question 136. For a concentrated solution of a weak electrolyte AxBy of concentration 'C', the degree of dissociation 'α' is given as: [PET (Kerala) 2008] (a) α = √(Keq/C(x + y)) (b) α = √(C Keq/xy) (c) α = [Keq/(Cx+y−1 xx yy)]1/(x+y) (d) α = Keq/(Cxy) (e) α = Keq/Cxy

Solution. AxBy ⇌ xAy+ + yBx−; at equilibrium: C(1 − α), xCα, yCα. Keq = (xCα)x(yCα)y/[C(1 − α)] ≈ (xCα)x(yCα)y/C, since (1 − α) ≈ 1. Hence α = [Keq/(Cx+y−1 xx yy)]1/(x+y). Answer: (c).

Teacher's Note: Write the ICE table, approximate 1 − α ≈ 1, and solve for α with the exponent 1/(x+y).

Exam Note: Check by x = y = 1: α = √(K/C).

Question 137. The following equilibrium is established when hydrogen chloride is dissolved in acetic acid: HCl + CH3COOH ⇌ Cl− + CH3COOH2+. The set that characterises the conjugate acid-base pairs is: [IIT 1992] (a) (HCl, CH3COOH) and (CH3COOH2+, Cl−) (b) (HCl, CH3COOH2+) and (CH3COOH, Cl−) (c) (CH3COOH2+, HCl) and (Cl−, CH3COOH) (d) (HCl, Cl−) and (CH3COOH2+, CH3COOH)

Solution. Answer (from key): (d) (HCl, Cl−) and (CH3COOH2+, CH3COOH). HCl donates H+ to become Cl− (pair HCl/Cl−); CH3COOH accepts H+ to become CH3COOH2+ (pair CH3COOH2+/CH3COOH).

Teacher's Note: Pairs differ by one proton: HCl/Cl− and CH3COOH2+/CH3COOH.

Exam Note: Match species differing by exactly H+.

Question 138. The pH of a 10−10 M NaOH solution is: [PMT (Uttarakhand) 2006] (a) 10 (b) 7.01 (c) 6.99 (d) 4

Solution. Answer (from key): (b) 7.01. The base is so dilute that water's OH− (10−7 M) dominates: [OH−] ≈ 10−7 + 10−10, giving pOH ≈ 6.9996 and pH ≈ 7.0004, i.e. slightly above 7 (7.01).

Teacher's Note: Add water's 10−7 M OH− to the tiny NaOH contribution.

Exam Note: A base never gives pH below 7.

Question 139. Which of the following is strongest Lewis base? (a) CH3− (b) Ag+ (c) NH3 (d) H2

Solution. Answer (from key): (a) CH3−. CH3− carries a negative charge on carbon with a lone pair and is the most powerful electron-pair donor (conjugate base of the very weak acid CH4).

Teacher's Note: Strongest donor is conjugate base of weakest acid.

Exam Note: Ag+ is a Lewis acid.

Question 140. If the solubility of lithium sodium hexafluoro aluminate, Li3Na3(AlF6)2 is 'S' mol L−1, its solubility product is equal to: [CPMT 1992] (a) S8 (b) 125S3 (c) 18S3 (d) 2916S8

Solution. Answer (from key): (d) 2916S8. Li3Na3(AlF6)2 ⇌ 3Li+ + 3Na+ + 2AlF63−. Ksp = (3S)3(3S)3(2S)2 = 27 × 27 × 4 S8 = 2916S8.

Teacher's Note: Raise each ion's 3S, 3S, 2S to its coefficient.

Exam Note: 27 × 27 × 4 = 2916.

Question 141. Given that the dissociation constant for water is Kw = 1 × 10−14 mol2 L−2. The pH of a 0.001 molar KOH solution is: [MLNR 1991] (a) 10−11 (b) 10−3 (c) 3 (d) 11

Solution. Answer (from key): (d) 11. [OH−] = 10−3 M, [H+] = 10−14/10−3 = 10−11 M, so pH = 11.

Teacher's Note: Strong base: [H+] = Kw/[OH−], then pH.

Exam Note: pH is the log, not the concentration.

Question 142. Which one of the following solutions will have the highest pH value? [CPMT 1992] (a) 0.01 M NaOH (b) 0.02 M CH3COONa (c) 0.10 M NaHCO3 (d) 0.10 M H2SO4

Solution. Answer: (a) 0.01 M NaOH. 0.01 M NaOH is a strong base with pH = 12. CH3COONa has pH about 8.5, NaHCO3 about 8.3 and H2SO4 is strongly acidic. Corrected: the printed key gives (c), but NaHCO3 cannot exceed NaOH; the highest pH is (a).

Teacher's Note: Strong base beats hydrolysed salts, which beat acids.

Exam Note: Compare: strong base, weak-base salts, acid.

Question 143. In the titration of NH4OH with HCl, the indicator which cannot be used is: (a) phenolphthalein (b) methyl orange (c) methyl red (d) both methyl orange and methyl red

Solution. Answer (from key): (a) phenolphthalein. The end point is acidic (salt of weak base), so methyl orange and methyl red work but phenolphthalein (range 8–9.8) cannot.

Teacher's Note: Acidic end point rules out phenolphthalein.

Exam Note: Match indicator range to the end point pH.

Question 144. pH of the buffer solution containing 0.6 g of acetic acid and 8.2 g of sodium acetate in 1 litre of water is: (pKa of acetic acid = 4.5) (a) 7.5 (b) 4.5 (c) 5.5 (d) 6.5

Solution. Answer: (c) 5.5. [Acid] = 0.6/60 = 0.01 M and [Salt] = 8.2/82 = 0.1 M. pH = 4.5 + log(0.1/0.01) = 5.5. Corrected: the printed key gives (b) 4.5, but the calculation gives pH = 5.5, option (c).

Teacher's Note: Convert grams to moles first, then use the Henderson equation.

Exam Note: Molar masses: acid 60, salt 82.

Question 145. At 25 °C, the dissociation constants of CH3COOH and NH4OH in aqueous solution are almost the same. The pH of a solution of 0.01 N CH3COOH is 4.0 at 25 °C. The pH of 0.01 N NH4OH solution at the same temperature would be: [IIT 1990] (a) 3.0 (b) 4.0 (c) 10.0 (d) 10.5

Solution. [H+] in CH3COOH solution = 10−4. Since Ka ≈ Kb and the concentration is the same, [OH−] in NH4OH solution is also 10−4. So [H+] = Kw/[OH−] = 10−14/10−4 = 10−10, pH = 10. Answer: (c).

Teacher's Note: Equal K and concentration give equal [OH−] for the base as [H+] for the acid.

Exam Note: pH + pOH = 14 at 25 °C.

Question 146. The dissociation constant of acetic acid is 1.8 × 10−5 and that of ammonium hydroxide is also 1.8 × 10−5 at 25 °C. Hence, an aqueous solution of ammonium acetate is: (a) acidic (b) basic (c) neutral (d) slightly acidic

Solution. Answer (from key): (c) neutral. Ka = Kb, so cation and anion hydrolyse equally; pH = 7 + ½(pKa − pKb) = 7, i.e. neutral.

Teacher's Note: Equal Ka and Kb give pH 7 for the salt.

Exam Note: pH = 7 + ½(pKa − pKb).

Question 147. The concentration of OH− ions in neutral solution is: (a) 1 × 10−14 g ions/litre (b) 1 × 1014 g ions/litre (c) 1 × 107 g ions/litre (d) 1 × 10−7 g ions/litre

Solution. Answer (from key): (d) 1 × 10−7 g ions/litre. In a neutral solution at 25 °C [OH−] = [H+] = √Kw = 10−7 g ions/litre.

Teacher's Note: Neutral at 25 °C: [OH−] = [H+] = 10−7.

Exam Note: Not 10−14, which is Kw.

Question 148. 10−6 M NaOH is diluted by 100 times. The pH of diluted base is: [PMT (Pb.) 1993] (a) between 6 and 7 (b) between 10 and 11 (c) between 7 and 8 (d) between 5 and 6

Solution. Answer (from key): (c) between 7 and 8. After dilution [OH−] from NaOH = 10−8 M, which is less than water's 10−7 M. Total [OH−] ≈ 1.1 × 10−7 M, pOH ≈ 6.96 and pH ≈ 7.04, between 7 and 8.

Teacher's Note: Include water's own OH− when the base is below 10−7 M.

Exam Note: Dilution cannot make a base acidic.

Question 149. Ionic dissociation of acetic acid is represented as: CH3COOH + H2O ⇌ CH3COO− + H3O+. According to Lowry and Bronsted, the reaction possesses: [CEE (Bihar) 1992] (a) an acid and three bases (b) two acids and two bases (c) an acid and a base (d) three acids and a base

Solution. Answer (from key): (b) two acids and two bases. Forward: CH3COOH (acid) and H2O (base). Reverse: H3O+ (acid) and CH3COO− (base). So two acids and two bases.

Teacher's Note: Count donors and acceptors in both directions.

Exam Note: Include the reverse reaction's pair.

Question 150. The concept of an acid as an acceptor of a pair of electrons was introduced by: (a) Lowry (b) Bronsted (c) Arrhenius (d) Lewis

Solution. Answer (from key): (d) Lewis. G. N. Lewis defined an acid as an electron-pair acceptor.

Teacher's Note: Lewis: acid accepts an electron pair.

Exam Note: Match each theory with its scientist.

Question 151. The ionic product of water will increase if: (a) pressure is decreased (b) H+ ions are added (c) OH− ions are added (d) temperature is increased

Solution. Answer (from key): (d) temperature is increased. Kw depends only on temperature, and ionisation of water is endothermic, so Kw rises with temperature.

Teacher's Note: Kw changes only with temperature.

Exam Note: Adding H+ or OH− leaves Kw unchanged.

Question 152. One litre of a buffer solution containing 0.01 M NH4Cl and 0.1 M NH4OH having pKb of 5 has pH of: (a) 10 (b) 9 (c) 4 (d) 6

Solution. Answer (from key): (a) 10. pOH = pKb + log([salt]/[base]) = 5 + log(0.01/0.1) = 4, so pH = 14 − 4 = 10.

Teacher's Note: Basic buffer: pOH first, then subtract from 14.

Exam Note: Salt/base ratio is 0.1, giving log = −1.

Question 153. An aqueous solution of ferric chloride would be: (a) acidic (b) neutral (c) basic (d) amphoteric

Solution. Answer (from key): (a) acidic. FeCl3 is the salt of a weak base Fe(OH)3 and a strong acid; Fe3+ hydrolyses to give an acidic solution.

Teacher's Note: Weak base, strong acid salt is acidic.

Exam Note: Cation hydrolysis releases H+.

Question 154. An acid solution of pH 6 is diluted hundred times. The pH of the solution becomes: (a) 6 (b) 6.95 (c) 4 (d) 8

Solution. Answer (from key): (b) 6.95. [H+] after dilution = 10−8 M from the acid plus 10−7 M from water = 1.1 × 10−7 M, pH ≈ 6.96 (printed 6.95).

Teacher's Note: Acid at 10−8 M must add water's 10−7 M.

Exam Note: pH stays below 7 for an acid.

Question 155. The pH of a solution is 5.0. To this solution sufficient acid is added to decrease the pH to 2.0. The increase in hydrogen ion concentration is: (CPMT 1990) (a) 100 times (b) 10 times (c) 1000 times (d) 2.5 times

Solution. Answer (from key): (c) 1000 times. [H+] goes from 10−5 to 10−2 M, an increase of 103 = 1000 times.

Teacher's Note: Three pH units mean a factor of 103.

Exam Note: Ratio = 10(5−2).

Question 156. Conjugate base of HPO42− is: [PMT (MP) 1991] (a) PO43− (b) H2PO4− (c) H3PO4 (d) H4PO3

Solution. Answer (from key): (a) PO43−. Removing one H+ from HPO42− gives PO43−.

Teacher's Note: Conjugate base has one proton fewer.

Exam Note: Lose H+, charge becomes more negative.

Question 157. The pH of a solution is 2. Its pH is to be changed to 4. Then the H+ ion concentration of original solution has to be: (a) halved (b) doubled (c) increased 100 times (d) decreased 100 times

Solution. Answer (from key): (d) decreased 100 times. pH 2 to pH 4 changes [H+] from 10−2 to 10−4 M, a decrease of 100 times.

Teacher's Note: Raising pH by 2 lowers [H+] by 100.

Exam Note: Direction matters: pH up, [H+] down.

Question 158. The pH value of 0.1 mol/litre HCl is approximately 1. The approximate pH value of 0.05 mol/litre H2SO4 is most likely to be: (a) 0.05 (b) 0.5 (c) 1 (d) 2

Solution. Answer (from key): (c) 1. 0.05 M H2SO4 gives 0.10 M H+ (two protons), the same as 0.1 M HCl, so pH ≈ 1.

Teacher's Note: Dibasic acid doubles [H+].

Exam Note: 0.05 × 2 = 0.1 M H+.

Question 159. The aqueous solution of a salt is alkaline. This shows that the salt is made from: [PMT (MP) 1991] (a) a weak acid and a weak base (b) a weak acid and a strong base (c) a strong acid and a strong base (d) a strong acid and a weak base

Solution. Answer (from key): (b) a weak acid and a strong base. The anion of the weak acid hydrolyses, producing OH−, so the solution is alkaline.

Teacher's Note: Alkaline salt: weak acid anion hydrolyses.

Exam Note: Strong base fixes the cation as spectator.

Question 160. A semi-normal solution of sodium acetate in water has [H+]: (a) less than 10−7 M (b) greater than 10−7 M (c) equal to 10−7 M (d) none of these

Solution. Answer (from key): (a) less than 10−7 M. Sodium acetate hydrolyses to give OH−, so the solution is basic and [H+] < 10−7 M.

Teacher's Note: Basic solution has [H+] below 10−7 M.

Exam Note: Salt of weak acid with strong base is basic.

Question 161. The most important buffer in the blood consists of: (a) HCl and Cl− (b) H2CO3 and HCO3− (c) H2CO3 and Cl− (d) HCl and HCO3−

Solution. Answer (from key): (b) H2CO3 and HCO3−. The carbonic acid/bicarbonate pair is the main buffer holding blood at about pH 7.4.

Teacher's Note: Weak acid plus its conjugate base: H2CO3/HCO3−.

Exam Note: HCl cannot be part of a buffer.

Question 162. The pH of a buffer solution containing 25 mL of 1 M CH3COONa and 25 mL of 1 M CH3COOH will be appreciably affected by 5 mL of: (a) 1 M CH3COOH (b) 5 M HCl (c) 5 M CH3COOH (d) 1 M NH4OH

Solution. Answer (from key): (b) 5 M HCl. 5 mL of 5 M HCl supplies 25 mmol H+, equal to the 25 mmol of acetate in the buffer, so it destroys the buffer; the other additions are small or weak.

Teacher's Note: Compare added H+ with the buffer's 25 mmol capacity.

Exam Note: Strong acid in large amount exhausts the buffer.

Question 163. 50 mL of 2 N acetic acid mixed with 10 mL of 1 N sodium acetate solution will have an approximate pH: (pKa of acetic acid = 4.74) (a) 7 (b) 6 (c) 5 (d) 4

Solution. Answer (from key): (d) 4. Acid = 50 × 2 = 100 meq, salt = 10 meq. pH = 4.74 + log(10/100) = 3.74, approximately 4.

Teacher's Note: Henderson equation with salt : acid = 1 : 10.

Exam Note: log(0.1) = −1 subtracts one unit.

Question 164. The solution of which salt in water is acidic? (a) Na2B4O7 (b) NaHCO3 (c) KCl (d) FeCl3

Solution. Answer (from key): (d) FeCl3. FeCl3 is the salt of a weak base and a strong acid; Fe3+ hydrolyses to give an acidic solution. Borax and NaHCO3 are basic, KCl neutral.

Teacher's Note: Strong acid with weak base gives acidic salt.

Exam Note: Borax is basic, not acidic.

Question 165. Which of the following expressions is not true? (a) [H+] = [OH−] = √Kw for a neutral solution (b) [H+] > √Kw and [OH−] < √Kw for an acidic solution (c) [H+] < √Kw and [OH−] > √Kw for an alkaline solution (d) [H+] = [OH−] = 10−7 M for a neutral solution at all temperatures

Solution. Answer (from key): (d) [H+] = [OH−] = 10−7 M for a neutral solution at all temperatures. Neutrality means [H+] = [OH−] = √Kw, and Kw changes with temperature, so the value 10−7 M holds only at 25 °C.

Teacher's Note: Neutral concentration is √Kw, which varies with temperature.

Exam Note: 10−7 is valid only at 25 °C.

Question 166. Ammonia gas dissolves in water to give NH4OH. In this reaction water acts as: [PMT (MP) 1990] (a) an acid (b) a base (c) a salt (d) a conjugate base

Solution. Answer (from key): (a) an acid. NH3 + H2O ⇌ NH4+ + OH−: water donates a proton to NH3, so water acts as an acid.

Teacher's Note: Water donates H+ to ammonia.

Exam Note: Ammonia is the base here.

Question 167. What is the decreasing order of strength of the bases OH−, NH2−, H–C≡C− and CH3CH2−? [IIT 1993] (a) CH3CH2− > NH2− > H–C≡C− > OH− (b) H–C≡C− > CH3–CH2− > NH2− > OH− (c) OH− > NH2− > H–C≡C− > CH3CH2− (d) NH2− > H–C≡C− > OH− > CH3CH2−

Solution. Answer (from key): (a) CH3CH2− > NH2− > H–C≡C− > OH−. The strongest base is the conjugate base of the weakest acid. Acid strength: H2O > HC≡CH > NH3 > CH3CH3, so base strength is CH3CH2− > NH2− > HC≡C− > OH−.

Teacher's Note: Weaker conjugate acid gives stronger base.

Exam Note: Order the parent acids first.

Question 168. The best explanation for the solubility of MnS in dil. HCl is that: [MLNR 1993] (a) solubility product of MnCl2 is less than that of MnS (b) concentration of Mn2+ is lowered by the formation of complex ions (c) concentration of sulphide ions is lowered by oxidation to free sulphur (d) concentration of sulphide ions is lowered by the formation of weak acid H2S

Solution. Answer (from key): (d) concentration of sulphide ions is lowered by the formation of weak acid H2S. H+ from HCl combines with S2− to form weakly ionised H2S, lowering [S2−] so that the ionic product falls below Ksp and MnS dissolves.

Teacher's Note: Acid removes S2− as H2S, pushing ionic product below Ksp.

Exam Note: Ionic product below Ksp means dissolution.

Question 169. The correct order of increasing [H3O+] in the following aqueous solutions is: [CPMT 1993; AFMC 2009] (a) 0.001 M H2S < 0.01 M H2SO4 < 0.01 M NaCl < 0.01 M NaNO2 (b) 0.01 M NaCl < 0.01 M NaNO2 < 0.01 M H2S < 0.01 M H2SO4 (c) 0.01 M NaNO2 < 0.01 M NaCl < 0.01 M H2S < 0.01 M H2SO4 (d) 0.01 M H2S < 0.01 M NaCl < 0.01 M NaNO2 < 0.01 M H2SO4

Solution. Answer (from key): (c) 0.01 M NaNO2 < 0.01 M NaCl < 0.01 M H2S < 0.01 M H2SO4. NaNO2 is the salt of a weak acid (basic, lowest [H+]), NaCl is neutral, H2S is a weak acid and H2SO4 is strong. Increasing [H3O+]: NaNO2 < NaCl < H2S < H2SO4.

Teacher's Note: Rank basic salt, neutral salt, weak acid, strong acid.

Exam Note: Nitrite hydrolyses to give OH−.

Question 170. Which of the following statements/relationships is not correct? (a) Upon hydrolysis salt of strong base and weak acid gives a solution with pH > 7 (b) pH = log 1/[H+] (c) Only at 25 °C, the pH of pure water is 7 (d) The value of pKw at 25 °C is 7

Solution. Answer (from key): (d) The value of pKw at 25 °C is 7. pKw = −log(10−14) = 14 at 25 °C, not 7 (7 is the pH of pure water).

Teacher's Note: pKw at 25 °C is 14, and pH of water is 7.

Exam Note: Do not confuse pKw with neutral pH.

Question 171. Fear and excitement generally cause one to breathe rapidly and it results in the decrease of CO2 concentration in blood. In what way will it change the pH of the blood? [IIT 1993] (a) pH will decrease (b) pH will increase (c) no change (d) pH will adjust to 7

Solution. Answer (from key): (b) pH will increase. Lower CO2 shifts CO2 + H2O ⇌ H2CO3 ⇌ H+ + HCO3− to the left, so [H+] falls and pH rises.

Teacher's Note: Less CO2 means less carbonic acid, so pH increases.

Exam Note: Le Chatelier on the carbonic acid system.

Question 172. Nucleophiles are: (a) Lewis acids (b) Lewis bases (c) Bronsted acids (d) none of these

Solution. Answer (from key): (b) Lewis bases. Nucleophiles donate electron pairs, which is the Lewis base definition.

Teacher's Note: Nucleophile is an electron-pair donor.

Exam Note: Nucleophile equals Lewis base.

Question 173. Electrophiles are: (a) Lewis acids (b) Lewis bases (c) Bronsted acids (d) Bronsted bases

Solution. Answer (from key): (a) Lewis acids. Electrophiles accept electron pairs, so they are Lewis acids.

Teacher's Note: Electrophile accepts an electron pair.

Exam Note: Electrophile equals Lewis acid.

Question 174. Kh (hydrolysis constant) of ammonium benzoate can be calculated by the formula: [as printed] (a) √(Kw/(KaC)) (b) √(Kw/(Ka × Kb)) (c) √(Kw/(Kb × C)) (d) √(Kh/C)

Solution. Answer (from key): (b) √(Kw/(Ka × Kb)). For a salt of a weak acid and a weak base Kh = Kw/(KaKb), independent of concentration; the printed option (b) is the one containing Kw/(KaKb) (the square root gives the degree of hydrolysis h ≈ √Kh). Needs human check: option (b) as printed is the key's answer, but strictly it equals h, not Kh.

Teacher's Note: Weak acid plus weak base salt: Kh = Kw/(Ka·Kb), no concentration term.

Exam Note: Only option without C is (b).

Question 175. The pH of a neutral water is 6.5. Then the temperature of water: [PET (Kerala) 2007] (a) is 25 °C (b) is more than 25 °C (c) is less than 25 °C (d) can be more or less than 25 °C (e) cannot be predicted

Solution. Answer (from key): (b) is more than 25 °C. pH of neutral water falls below 7 as Kw increases, which happens when temperature rises above 25 °C.

Teacher's Note: Neutral pH below 7 means Kw larger, so hotter.

Exam Note: Ionisation of water is endothermic.

Question 176. The buffer capacity of buffer containing acid with pKa = 4.0 is highest when its pH is equal to: (a) 6.0 (b) 5.0 (c) 4.0 (d) 3.0

Solution. Answer (from key): (c) 4.0. Buffer capacity is maximum when [acid] = [salt], i.e. pH = pKa = 4.0.

Teacher's Note: Maximum capacity at pH = pKa.

Exam Note: Equal acid and salt.

Question 177. Ksp (AgCl) > Ksp (AgBr) > Ksp (AgI). This means that: (a) AgCl is more ionised than AgBr and AgI (b) both AgBr and AgI are less soluble than AgCl (c) AgI is most soluble (d) AgBr is more soluble than AgCl but less soluble than AgI

Solution. Answer (from key): (b) both AgBr and AgI are less soluble than AgCl. All three are AB type, so larger Ksp means larger solubility: AgCl > AgBr > AgI.

Teacher's Note: Same type of salt: solubility order follows Ksp.

Exam Note: Do not read Ksp as degree of ionisation.

Question 178. In the hydrolytic equilibrium B+ + H2O ⇌ BOH + H+, Kb = 1 × 10−5. The hydrolysis constant is: (a) 10−5 (b) 10−19 (c) 10−10 (d) 10−9

Solution. Answer (from key): (d) 10−9. Kh = Kw/Kb = 10−14/10−5 = 10−9.

Teacher's Note: Kh = Kw/Kb for a weak base cation.

Exam Note: Divide, do not multiply.

Question 179. The solution of a salt of a weak acid and weak base will have pH: (Kb = 1.0 × 10−6 and Ka = 1.0 × 10−4) (a) 7.0 (b) 8.0 (c) 6 (d) 4.0

Solution. Answer (from key): (c) 6. pH = 7 + ½(pKa − pKb) = 7 + ½(4 − 6) = 6.

Teacher's Note: Use pH = 7 + ½(pKa − pKb).

Exam Note: Acid stronger than base gives pH below 7.

Question 180. 0.1 N solution of sodium acetate will have pH: (pKa = 4.57) (a) 8.78 (b) 11.57 (c) 4.57 (d) 7.0

Solution. Answer (from key): (a) 8.78. pH = 7 + ½(pKa + log C) = 7 + ½(4.57 − 1) = 8.785 ≈ 8.78.

Teacher's Note: Salt of weak acid and strong base: pH = ½(pKw + pKa + log C).

Exam Note: log 0.1 = −1.

Question 181. The following acids have been arranged in the order of decreasing acid strength. Identify the correct order: ClOH (I), BrOH (II), IOH (III) [IIT 1996] (a) I > II > III (b) II > I > III (c) III > II > I (d) I > III > II

Solution. Answer (from key): (a) I > II > III. Acid strength of HOX falls as electronegativity of X decreases: Cl > Br > I, so ClOH > BrOH > IOH.

Teacher's Note: Electronegative halogen pulls electrons, easing H release.

Exam Note: Strength tracks the halogen's electronegativity.

Question 182. Which of the following statements is correct? (a) pKw increases with increase of temperature (b) pKw decreases with increase of temperature (c) pKw = 14 at all temperatures (d) pKw = pH at all temperatures

Solution. Answer (from key): (b) pKw decreases with increase of temperature. Kw increases with temperature, so pKw = −log Kw decreases.

Teacher's Note: Higher Kw means lower pKw.

Exam Note: Neutral pH of water falls when heated.

Question 183. For a concentrated solution of a weak electrolyte Ax and By, the degree of dissociation is given as: (a) α = √(Keq/c(x + y)) (b) α = √(Keqc/(xy)) (c) α = (Keq/cx+y−1 xx yy)1/(x+y) (d) α = √(Keq/xyc)

Solution. Answer (from key): (c) α = (Keq/cx+y−1 xx yy)1/(x+y). With C(1 − α), xCα and yCα at equilibrium and 1 − α ≈ 1, Keq = (xCα)x(yCα)y/C, giving α = [Keq/(Cx+y−1 xx yy)]1/(x+y) (same derivation as Question 136).

Teacher's Note: Same ICE derivation as 136: exponent 1/(x+y).

Exam Note: General form reduces to √(K/C) for x = y = 1.

Question 184. A solution is saturated with respect to SrCO3 and SrF2. The [CO32−] was found to be 1.2 × 10−3 M. The concentration of F− in the solution would be: (Given: Ksp SrCO3 = 7.0 × 10−10 M2, Ksp(SrF2) = 7.9 × 10−10 M3) (a) 1.3 × 10−3 M (b) 2.6 × 10−2 M (c) 3.7 × 10−2 M (d) 5.8 × 10−7 M

Solution. Answer (from key): (c) 3.7 × 10−2 M. [Sr2+] = 7.0 × 10−10/1.2 × 10−3 = 5.83 × 10−7 M. [F−]2 = 7.9 × 10−10/5.83 × 10−7 = 1.355 × 10−3, so [F−] = 3.68 × 10−2 ≈ 3.7 × 10−2 M.

Teacher's Note: Find shared [Sr2+] from SrCO3, then use SrF2.

Exam Note: One Sr2+ serves both equilibria.

Question 185. The solubility of sparingly soluble electrolyte MmAa in water is given by the expression: (a) S = [Ksp/(mm aa)]m+a (b) S = [Ksp/(mm aa)]1/(m+a) (c) S = [Ksp/(ma am)]m+a (d) S = [Ksp/(ma am)]1/(m+a)

Solution. Answer (from key): (b) S = [Ksp/(mm aa)]1/(m+a). Ksp = (mS)m(aS)a = mm aa Sm+a, so S = [Ksp/(mm aa)]1/(m+a).

Teacher's Note: Write Ksp = mm aa Sm+a and take the root.

Exam Note: Exponent is 1/(m+a), not m+a.

Question 186. The solubility of mercurous chloride will be given as: (a) S = Ksp (b) S = Ksp/4 (c) S = (Ksp/4)1/2 (d) S = (Ksp/4)1/3

Solution. Answer (from key): (d) S = (Ksp/4)1/3. Mercurous chloride is Hg2Cl2 ⇌ Hg22+ + 2Cl−. Ksp = S(2S)2 = 4S3, so S = (Ksp/4)1/3.

Teacher's Note: Mercurous ion is Hg22+: AB2 type.

Exam Note: Cube root for 4S3.

Question 187. In the titration of acetic acid versus sodium hydroxide, the pH of the solution at equivalence point (when temperature is 25 °C) is: (a) about 5.5 (b) about 6.5 (c) about 7 (d) about 8.5

Solution. Answer (from key): (d) about 8.5. At equivalence the solution contains CH3COONa, which hydrolyses to give a weakly basic solution, pH about 8.5.

Teacher's Note: Salt of weak acid and strong base: pH above 7.

Exam Note: Phenolphthalein suits this end point.

Question 188. When K2O is added to water, the solution is basic because it contains a significant concentration of: (a) K+ (b) OH− (c) O3− (d) O22−

Solution. Answer (from key): (b) OH−. K2O + H2O → 2K+ + 2OH−; the OH− ions make the solution basic.

Teacher's Note: Basic oxide in water gives hydroxide.

Exam Note: Write the equation: oxide plus water.

Question 189. The blood buffers are most often involved in stabilizing the pH in presence of metabolically produced: (a) acids (b) bases (c) salts (d) none of these

Solution. Answer (from key): (a) acids. Metabolism mainly produces acids (CO2, lactic acid), which the blood buffers neutralise.

Teacher's Note: Metabolic products are mainly acidic.

Exam Note: Buffer absorbs excess H+.

Question 190. The colour of CuCr2O7 solution in water is green because: (a) Cu2+ ion is green (b) Cr2O72− ions are green (c) both the ions are green (d) Cu2+ is blue and Cr2O72− ion is yellow

Solution. Answer (from key): (d) Cu2+ is blue and Cr2O72− ion is yellow. Blue Cu2+ and yellow (orange-yellow) Cr2O72− together appear green.

Teacher's Note: Blue plus yellow gives green.

Exam Note: Combine the two ions' colours.

Question 191. An acid with molecular formula C7H6O3 forms three types of sodium salts, i.e., C7H5O3Na, C7H4O3Na2 and C7H3O3Na3. The basicity of the acid is: (a) one (b) two (c) three (d) four

Solution. Answer (from key): (c) three. Basicity equals the number of replaceable H atoms. The three salts carry 1, 2 and 3 Na atoms, so as stated in the question the acid behaves as tribasic.

Teacher's Note: Basicity = number of H replaced by Na in the largest salt.

Exam Note: Count Na atoms in the last salt.

Question 192. If the salts M2X, QY2 and PZ3 have the same solubilities, their Ksp values are related as: (a) Ksp(M2X) = Ksp(QY2) < Ksp(PZ3) (b) Ksp(M2X) > Ksp(QY2) = Ksp(PZ3) (c) Ksp(M2X) = Ksp(QY2) = Ksp(PZ3) (d) Ksp(M2X) > Ksp(QY2) > Ksp(PZ3)

Solution. Answer (from key): (a) Ksp(M2X) = Ksp(QY2) < Ksp(PZ3). M2X and QY2 both have Ksp = 4S3, so they are equal; PZ3 has Ksp = 27S4. Printed key: (a), which needs 27S4 > 4S3, i.e. S > 0.148 M. Needs human check: for a sparingly soluble salt (S ≪ 0.148 M) Ksp(PZ3) is the smaller, which is not offered as an option.

Teacher's Note: Compute Ksp for each type at equal S: 4S3, 4S3, 27S4.

Exam Note: Compare 4S3 with 27S4; depends on S.

Question 193. In an experiment to determine the enthalpy of neutralization of sodium hydroxide with sulphuric acid, 50 cm3 of 0.4 M sodium hydroxide were titrated thermometrically with 0.25 M sulphuric acid. Which of the following plots gives the correct representation? Temperature is plotted against volume of H2SO4 (10, 30, 50 mL marked): (a) temperature rises to a break at 30 mL, then stays flat; (b) rises to a break at 40 mL, then stays flat; (c) rises to a peak at 30 mL, then falls; (d) rises to a peak at 40 mL, then falls.

Solution. NaOH = 50 × 0.4 = 20 mmol, needing 10 mmol H2SO4 = 10/0.25 = 40 mL. Temperature rises up to 40 mL (neutralisation heat) and then falls as unreacted cooler acid is added. Corrected: the printed key gives (b) (a flat plateau); the correct plot is (d).

Teacher's Note: Find the equivalence volume (40 mL); beyond it added acid cools the mixture.

Exam Note: Equivalence at 40 mL, then temperature falls.

Question 194. Ksp of CuS, Ag2S and HgS are 10−31, 10−44 and 10−54 respectively. Select the correct order for their solubility in water: [CBSE 1997] (a) Ag2S > HgS > CuS (b) HgS > CuS > Ag2S (c) HgS > Ag2S > CuS (d) Ag2S > CuS > HgS

Solution. Solubility of Ag2S (4S3 = Ksp) and for CuS and HgS (S2 = Ksp): Ag2S: S = (10−44/4)1/3 ≈ 1.4 × 10−15 M; CuS: S = √10−31 ≈ 3.2 × 10−16 M; HgS: S = √10−54 = 10−27 M. So Ag2S > CuS > HgS. Answer: (d).

Teacher's Note: Different salt types (AB vs A2B): compute actual solubilities, do not compare Ksp directly.

Exam Note: Ag2S has a lower Ksp than CuS yet is more soluble.

Question 195. If the Kb value in the hydrolysis reaction B+ + H2O ⇌ BOH + H+ is 1.0 × 10−6, then the hydrolysis constant of the salt would be: [IIT 1998] (a) 1.0 × 10−6 (b) 1.0 × 10−7 (c) 1 × 10−8 (d) 1.0 × 10−9

Solution. Answer (from key): (c) 1 × 10−8. Kh = Kw/Kb = 10−14/10−6 = 10−8.

Teacher's Note: Kh = Kw/Kb.

Exam Note: Subtract exponents: −14 − (−6).

Question 196. The concentration of [H+] and [OH−] of a 0.1 M aqueous solution of 2% ionised weak acid is: (ionic product of water = 1 × 10−14) [CBSE 1999] (a) 0.2 × 10−3 M and 5 × 10−11 M (b) 1 × 10−3 M and 3 × 10−11 M (c) 2 × 10−3 M and 5 × 10−12 M (d) 3 × 10−2 M and 4 × 10−13 M

Solution. [H+] = C × α = 0.1 × 0.02 = 2 × 10−3 M; [OH−] = Kw/[H+] = 10−14/(2 × 10−3) = 5 × 10−12 M. Answer: (c).

Teacher's Note: Weak acid: [H+] = Cα; then [OH−] from Kw.

Exam Note: 2% means α = 0.02, not 2.

Question 197. The pH value of decinormal solution of NH4OH, which is 20% ionised, is: (a) 13.30 (b) 14.70 (c) 12.30 (d) 12.95

Solution. [OH−] = Cα = 0.1 × 0.2 = 2 × 10−2 M; pOH = 1.7; pH = 14 − pOH = 12.3. Answer: (c). Corrected: the printed hint writes 2 × 10−3; the product is 2 × 10−2, which is what gives pOH = 1.7.

Teacher's Note: Weak base: [OH−] = Cα, then pH = 14 − pOH.

Exam Note: pOH first, then subtract from 14.

Question 198. The pH of 0.1 M solution of the following salts increases in the order: [IIT 1999] (a) NaCl < NH4Cl < NaCN < HCl (b) HCl < NH4Cl < NaCl < NaCN (c) NaCN < NH4Cl < NaCl < HCl (d) HCl < NaCl < NaCN < NH4Cl

Solution. Answer (from key): (b) HCl < NH4Cl < NaCl < NaCN. HCl (strong acid, pH 1) < NH4Cl (weakly acidic) < NaCl (neutral) < NaCN (basic).

Teacher's Note: Order: strong acid, acidic salt, neutral salt, basic salt.

Exam Note: Place each by its parent acid and base.

Question 199. A physician wishes to prepare a buffer solution at pH = 3.58 that efficiently resists changes in pH yet contains only small concentration of buffering agents. Which one of the following weak acids together with its sodium salt would be best to use? [CBSE 1997] (a) m-chlorobenzoic acid (pKa = 3.98) (b) p-chlorobenzoic acid (pKa = 4.41) (c) 2,5-dihydroxybenzoic acid (pKa = 2.97) (d) acetoacetic acid (pKa = 3.58)

Solution. Answer: (d) acetoacetic acid (pKa = 3.58). Buffer capacity is greatest when pH = pKa, so choose the acid with pKa = 3.58, acetoacetic acid. Corrected: the printed key gives (c), whose pKa is 2.97; the correct option is (d).

Teacher's Note: Choose the acid whose pKa equals the target pH.

Exam Note: Maximum capacity at pH = pKa.

Question 200. Which one does not give a buffer solution? (a) Ammonia and sodium hydroxide in water (b) Sodium acetate and acetic acid in water (c) Ammonia and ammonium chloride in water (d) Sodium acetate and hydrochloric acid in water

Solution. Answer (from key): (a) Ammonia and sodium hydroxide in water. A buffer needs a weak acid with its conjugate base (or weak base with its conjugate acid). NH3 with NaOH contains no conjugate acid of ammonia, so it is not a buffer.

Teacher's Note: Need a weak species plus its conjugate partner.

Exam Note: NaOH is a strong base, not a conjugate partner.

Question 201. Conjugate base of [Al(H2O)3(OH)3] is: (a) [Al(H2O)3(OH)2]+ (b) [Al(H2O)3(OH)2O]− (c) [Al(H2O)3(OH)3]− (d) [Al(H2O)2(OH)4]−

Solution. Answer (from key): (d) [Al(H2O)2(OH)4]−. Removal of one H+ from a coordinated water gives [Al(H2O)2(OH)4]−.

Teacher's Note: Lose H+ from a coordinated H2O: one H2O becomes OH.

Exam Note: Charge goes from 0 to −1.

Question 202. The solubility of calcium phosphate in water is x mol L−1 at 25 °C. Its solubility product is equal to: (a) 108x2 (b) 36x3 (c) 36x5 (d) 108x5

Solution. Answer (from key): (d) 108x5. Ca3(PO4)2 ⇌ 3Ca2+ + 2PO43−: Ksp = (3x)3(2x)2 = 108x5.

Teacher's Note: Raise 3x to the 3rd and 2x to the 2nd.

Exam Note: 27 × 4 = 108.

Question 203. Ksp values for silver bromide, silver chloride and silver iodide are 5 × 10−13 mol2 dm−6, 2 × 10−10 mol2 dm−6 and 8 × 10−17 mol2 dm−6 respectively. The order of solubility of these silver salts is: (a) AgCl > AgBr > AgI (b) AgI > AgBr > AgCl (c) AgCl > AgI > AgBr (d) AgI > AgCl > AgBr

Solution. Answer (from key): (a) AgCl > AgBr > AgI. All are AB type, so solubility follows Ksp: AgCl (2 × 10−10) > AgBr (5 × 10−13) > AgI (8 × 10−17).

Teacher's Note: Same type: larger Ksp means more soluble.

Exam Note: Compare exponents.

Question 204. In the reaction I2 + I− → I3−, the Lewis base is: (a) I2 (b) I− (c) I3− (d) none of these

Solution. Answer (from key): (b) I−. I− donates an electron pair to I2, so I− is the Lewis base.

Teacher's Note: Electron-pair donor is the base.

Exam Note: I2 accepts the pair.

Question 205. Which of the following on reaction with H2S does not produce metallic sulphide? (a) CdCl2 (b) ZnCl2 (c) CoCl2 (d) CuCl2

Solution. Answer (from key): (c) CoCl2. Taking the book's printed answer: CoS and ZnS need alkaline conditions and their Ksp is higher, so with plain H2S (acidic) CoCl2 gives no precipitate. Answer from key.

Teacher's Note: Group IV sulphides need an alkaline medium.

Exam Note: Sulphide solubility group decides precipitation.

Question 206. A buffer solution of pH = 9 can be prepared by mixing: (a) CH3COONa and CH3COOH (b) NaCl and NaOH (c) NH4Cl and NH4OH (d) KH2PO4 and K2HPO4

Solution. Answer (from key): (c) NH4Cl and NH4OH. NH4Cl with NH4OH is a basic buffer with pH about 9 (pKb 4.74, so pH ≈ 9.26). Acetate buffer is near 4.7 and phosphate near 7.2.

Teacher's Note: Match pK to the target pH: ammonia buffer about 9.

Exam Note: Basic pH needs a base-type buffer.

Question 207. Which of the following is the strongest Lewis base? (a) CH3− (b) NH2− (c) OH− (d) F−

Solution. Answer: (a) CH3−. Basic strength follows the weakness of the conjugate acid: CH4 < NH3 < H2O < HF, so CH3− > NH2− > OH− > F−. Corrected: the printed key gives (d) F−, the weakest of these; the strongest is (a).

Teacher's Note: Weakest conjugate acid gives strongest base.

Exam Note: Same logic as Question 139.

Question 208. The monobasic acid among the following is: [ISAT 2010] (a) H3PO3 (b) H2S2O7 (c) H3PO2 (d) H4P2O7

Solution. Answer (from key): (c) H3PO2. H3PO2 (hypophosphorous acid) has only one P–OH group, so it is monobasic; H3PO3 is dibasic, H2S2O7 dibasic and H4P2O7 tetrabasic.

Teacher's Note: Basicity equals the number of P–OH groups.

Exam Note: Count –OH on phosphorus.

Question 209. To Ag2CrO4 solution over its own precipitate, CrO42− ions are added. This results in: [MEE (Kerala) 2000] (a) increase in Ag+ concentration (b) decrease in Ag+ concentration (c) increase in solubility product (d) shifting of Ag+ ions from the precipitate into the solution

Solution. Answer (from key): (b) decrease in Ag+ concentration. Added CrO42− (common ion) shifts the equilibrium toward solid, so [Ag+] decreases; Ksp is unchanged.

Teacher's Note: Common ion pushes Ag+ out as precipitate.

Exam Note: Ksp stays fixed.

Question 210. Aluminium chloride is: [KCET 2000] (a) Bronsted Lowry acid (b) Arrhenius acid (c) Lewis acid (d) Lewis base

Solution. Answer (from key): (c) Lewis acid. AlCl3 is electron deficient and accepts an electron pair: a Lewis acid.

Teacher's Note: Electron-deficient aluminium accepts a pair.

Exam Note: No H+ donated, so not Bronsted.

Question 211. A 50 mL solution of pH = 1 is mixed with 50 mL solution of pH = 2. The pH of the mixture will be nearly: [IAS (Prelim.) 1995] (a) 0.76 (b) 1.26 (c) 1.76 (d) 2.26

Solution. Answer (from key): (b) 1.26. [H+] = (0.1 × 50 + 0.01 × 50)/100 = 0.055 M, so pH = 1.26.

Teacher's Note: Average the concentrations over 100 mL.

Exam Note: pH 1 means 0.1 M.

Question 212. The [Ag+] in a saturated solution of Ag2CrO4 is 1.5 × 10−4 M. What is the solubility product of Ag2CrO4? [SCRA 2009] (a) 3.375 × 10−12 M3 (b) 1.6875 × 10−10 M3 (c) 1.6875 × 10−11 M3 (d) 1.6875 × 10−12 M3

Solution. Ag2CrO4 ⇌ 2Ag+ + CrO42−. [Ag+] = 1.5 × 10−4 M, so [CrO42−] = 0.75 × 10−4 M. Ksp = [Ag+]2[CrO42−] = (1.5 × 10−4)2(0.75 × 10−4) = 1.6875 × 10−12 M3. Answer: (d).

Teacher's Note: Chromate is half of silver ion concentration; square the silver term.

Exam Note: Ksp = [Ag+]2[CrO42−]; units M3.

Question 213. The pH of a buffer containing equal molar concentrations of a weak base and its chloride (Kb for weak base = 2 × 10−5, log 2 = 0.3) is: (a) 5 (b) 9 (c) 4.7 (d) 9.3

Solution. Answer (from key): (d) 9.3. With equal base and salt, pOH = pKb = 5 − 0.3 = 4.7, so pH = 14 − 4.7 = 9.3.

Teacher's Note: Equal base and salt: pOH = pKb.

Exam Note: pKb = 5 − log 2.

Question 214. The solubility product (Ksp) of AgCl is 1.8 × 10−10. Precipitation of AgCl will occur only when equal volumes of solutions of: [IAS (Prelim.) 1997; PET (MP) 2007] (a) 10−4 M Ag+ and 10−4 M Cl− are mixed (b) 10−7 M Ag+ and 10−7 M Cl− are mixed (c) 10−5 M Ag+ and 10−5 M Cl− are mixed (d) 10−10 M Ag+ and 10−10 M Cl− are mixed

Solution. Answer (from key): (a) 10−4 M Ag+ and 10−4 M Cl− are mixed. After mixing, each concentration halves. (a): (5 × 10−5)2 = 2.5 × 10−9 > 1.8 × 10−10, so AgCl precipitates. (c): 2.5 × 10−11 < Ksp.

Teacher's Note: Halve each concentration, then compare with Ksp.

Exam Note: Dilution on mixing halves each ion.

Question 215. Solid Ba(NO3)2 is gradually dissolved in a 1 × 10−4 M Na2CO3 solution. At what concentration of Ba2+ will a precipitate begin to form? (Ksp for BaCO3 = 5.1 × 10−9) [AIEEE 2009] (a) 4.1 × 10−5 M (b) 5.1 × 10−5 M (c) 8.1 × 10−8 M (d) 8.1 × 10−7 M

Solution. Answer (from key): (b) 5.1 × 10−5 M. [Ba2+] = Ksp/[CO32−] = 5.1 × 10−9/10−4 = 5.1 × 10−5 M.

Teacher's Note: Threshold [Ba2+] = Ksp/[CO32−].

Exam Note: Direct division, no dilution given.

Question 216. How many gram of CaC2O4 will dissolve in distilled water to make one litre of unsaturated solution of it? (Ksp for CaC2O4 = 2.5 × 10−9 mol2 lit−2) [PMT (MP) 1990] (a) 0.0064 g (b) 0.1028 g (c) 0.1280 g (d) 0.2056 g

Solution. Answer (from key): (a) 0.0064 g. S = √(2.5 × 10−9) = 5 × 10−5 mol L−1; mass = 5 × 10−5 × 128 = 6.4 × 10−3 g (same as Question 37; the printed question says 'unsaturated' for 'saturated').

Teacher's Note: S = √Ksp then multiply by molar mass 128.

Exam Note: Same working as Question 37.

Question 217. When CO2 dissolves in water, the following equilibrium is established, CO2 + 2H2O ⇌ H3O+ + HCO3−, for which the equilibrium constant is 3.8 × 10−7 and pH = 6.0. The ratio of [HCO3−] to [CO2] would be: (a) 3.8 × 10−13 (b) 3.8 × 10−1 (c) 6.0 (d) 13.4

Solution. Answer (from key): (b) 3.8 × 10−1. K = [H3O+][HCO3−]/[CO2], so [HCO3−]/[CO2] = K/[H3O+] = 3.8 × 10−7/10−6 = 3.8 × 10−1.

Teacher's Note: Rearrange K for the ratio; [H+] = 10−6.

Exam Note: Divide by [H+].

Question 218. pH of a buffer solution decreases by 0.02 units when 0.12 g of acetic acid is added to 250 mL of a buffer solution of acetic acid and potassium acetate at 27 °C. The buffer capacity of the solution is: [EAMCET 2009] (a) 0.1 (b) 10 (c) 1 (d) 0.4

Solution. Answer (from key): (d) 0.4. Moles of acid added per litre = (0.12/60)/0.25 = 0.008 mol L−1. Buffer capacity = 0.008/0.02 = 0.4.

Teacher's Note: Capacity = moles per litre added ÷ change in pH.

Exam Note: Convert 0.12 g to moles (M = 60).

Question 219. The dissociation constants of monobasic acids A, B, C and D are 6 × 10−4, 5 × 10−5, 3.6 × 10−6 and 7 × 10−10 respectively. The pH values of their 0.1 molar aqueous solutions are in the order: (a) A < B < C < D (b) A > B > C > D (c) A = B = C = D (d) A > B < C > D

Solution. Answer: (a) A < B < C < D. For 0.1 M solutions pH = ½(pKa − log C), so a larger Ka gives a lower pH: pH(A) < pH(B) < pH(C) < pH(D). Corrected: the printed key gives (d); the correct order is (a).

Teacher's Note: Larger Ka, more H+, lower pH.

Exam Note: Rank by Ka from largest to smallest.

Question 220. If the equilibrium constant of the reaction of weak acid HA with strong base is 109, then pH in 0.1 M NaA is: (a) 5 (b) 9 (c) 7 (d) 8

Solution. Answer (from key): (b) 9. K = Ka/Kw = 109, so Ka = 10−5. pH of NaA = 7 + ½(pKa + log C) = 7 + ½(5 − 1) = 9.

Teacher's Note: Get Ka from K = Ka/Kw, then salt pH formula.

Exam Note: pKa = 5 and C = 0.1.

Question 221. If the freezing point of 0.1 molal HA (aq.) is −0.2046 °C, then pH of the solution is: [Kf (H2O) = 1.86° mol−1 kg] (a) 1 (b) 2 (c) 1.3 (d) 1.7

Solution. Answer (from key): (b) 2. ΔTf = i Kf m: 0.2046 = i × 1.86 × 0.1, so i = 1.1. For HA, i = 1 + α, so α = 0.1 and [H+] = 0.1 × 0.1 = 0.01 M, pH = 2.

Teacher's Note: Van't Hoff factor gives α; then [H+] = Cα.

Exam Note: i = 1 + α for a monobasic acid.

Question 222. % ionisation of weak acid can be calculated as: (a) 100√(Ka/c) (b) 100/(1 + 10(pKa − pH)) (c) both correct (d) none is correct

Solution. Answer (from key): (c) both correct. α = √(Ka/c) (small α) and, from Ka = [H+]α/(1 − α), α = 1/(1 + 10(pKa − pH)); both give % ionisation.

Teacher's Note: Two equivalent forms of α.

Exam Note: Second form comes from the Henderson relation.

Question 223. Assuming complete ionisation which will have maximum pH? (a) 0.01 M NH4Cl (b) 0.01 M (NH4)2SO4 (c) 0.01 M (NH4)3PO4 (d) equal

Solution. Answer (from key): (c) 0.01 M (NH4)3PO4. (NH4)3PO4 contains PO43−, the conjugate base of a weak acid, which hydrolyses to give OH− and raises pH compared with the chloride and sulphate salts.

Teacher's Note: Phosphate is the only basic ion present.

Exam Note: Cl− and SO42− barely hydrolyse.

Question 224. H2O + H3PO4 ⇌ H3O+ + H2PO4−; pK1 = 2.15. H2O + H2PO4− ⇌ H3O+ + HPO42−; pK2 = 7.20. Hence, pH of 0.01 M NaH2PO4 is: (a) 9.35 (b) 4.675 (c) 2.675 (d) 7.350

Solution. Answer (from key): (b) 4.675. H2PO4− is amphiprotic: pH = ½(pK1 + pK2) = ½(2.15 + 7.20) = 4.675.

Teacher's Note: Amphiprotic salt: average the two relevant pK values.

Exam Note: Independent of concentration.

Question 225. Acetyl salicylic acid (aspirin, structure: benzene ring bearing –OCOCH3 and –COOH ortho to each other) is a pain killer with pKa = 2. If two tablets each of 0.09 g mass, containing aspirin are dissolved in 100 mL solution. Its pH will be: (a) 0.5 (b) 1.0 (c) 0.0 (d) 2.0

Solution. Answer (from key): (d) 2.0. Aspirin (M = 180): 0.18 g = 10−3 mol in 0.1 L, C = 0.01 M. With Ka = 10−2, x2/(0.01 − x) = 0.01 gives x ≈ 6.2 × 10−3, pH ≈ 2.2, closest to 2.0.

Teacher's Note: Find C = 0.01 M, then Ka comparable to C: solve the quadratic.

Exam Note: pH ≈ 2.2, nearest option 2.0.

Question 226. If ionic product of water is Kw = 10−16 at 4 °C, then a solution with pH = 7.5 at 4 °C will: (a) turn blue litmus red (b) turn red litmus blue (c) turn turmeric paper brown (d) be neutral to litmus

Solution. Answer (from key): (a) turn blue litmus red. At 4 °C neutral pH = ½ pKw = 8, so a solution of pH 7.5 is acidic and turns blue litmus red.

Teacher's Note: Neutral pH is 8 here, so 7.5 is acidic.

Exam Note: Neutral pH = ½ pKw.

Question 227. How do we differentiate between Fe3+ and Cr3+ in group III? [AIEEE 2002] (a) By taking excess of NH4OH (b) By increasing NH4+ ion concentration (c) By decreasing OH− ion concentration (d) Both (b) and (c)

Solution. Answer (from key): (d) Both (b) and (c). Answer from key: raising [NH4+] (common ion) lowers [OH−]; Fe(OH)3 (very small Ksp) still precipitates but Cr(OH)3 does not, so the two are separated.

Teacher's Note: Lower [OH−] precipitates only the least soluble hydroxide.

Exam Note: Common ion NH4+ controls [OH−].

Question 228. Which has the highest pH? [CBSE (PMT) 2002] (a) CH3COOK (b) Na2CO3 (c) NH4Cl (d) NaNO3

Solution. Answer (from key): (b) Na2CO3. Na2CO3 (carbonate, Kb larger than acetate's) is the most basic; NH4Cl is acidic and NaNO3 neutral.

Teacher's Note: Compare conjugate base strengths of weak acids.

Exam Note: Carbonate is a stronger base than acetate.

Question 229. Water is a: [KCET 2002] (a) protophobic solvent (b) protophilic solvent (c) amphiprotic solvent (d) aprotic solvent

Solution. Answer (from key): (c) amphiprotic solvent. Water can both accept and donate protons, so it is an amphiprotic solvent.

Teacher's Note: Water donates and accepts protons.

Exam Note: Amphiprotic, not just protophilic.

Question 230. 1 M NaCl and 1 M HCl are present in an aqueous solution. The solution is: [AIEEE 2002] (a) not a buffer solution with pH < 7 (b) not a buffer solution with pH > 7 (c) a buffer solution with pH < 7 (d) a buffer solution with pH = 7

Solution. Answer (from key): (a) not a buffer solution with pH < 7. HCl is a strong acid (pH about 0), NaCl is neutral and there is no weak acid-conjugate pair, so it is not a buffer; pH < 7.

Teacher's Note: No weak acid or base: not a buffer.

Exam Note: Strong acid cannot buffer.

Question 231. Solution of 0.1 M NH4OH and 0.1 M NH4Cl has pH 9.25. Then pKb of NH4OH is: [CBSE (PMT) 2002] (a) 9.25 (b) 4.75 (c) 3.75 (d) 8.25

Solution. Answer (from key): (b) 4.75. Equal base and salt: pOH = pKb = 14 − 9.25 = 4.75.

Teacher's Note: Equal concentrations: pOH = pKb.

Exam Note: Convert pH to pOH first.

Question 232. Solubility of an MX2 type electrolyte is 0.5 × 10−4 mol/litre, then Ksp of electrolyte is: [CBSE (PMT) 2002] (a) 5 × 10−12 (b) 25 × 10−10 (c) 1 × 10−13 (d) 5 × 10−13

Solution. Answer (from key): (d) 5 × 10−13. Ksp = 4S3 = 4 × (0.5 × 10−4)3 = 4 × 1.25 × 10−13 = 5 × 10−13.

Teacher's Note: MX2: Ksp = 4S3.

Exam Note: Cube 0.5 × 10−4 carefully.

Question 233. The concentration of KI and KCl in a certain solution containing both is 0.001 M each. If 20 mL of this solution is added to 20 mL of a saturated solution of AgI in water. What will happen? (Ksp AgCl = 10−10; Ksp AgI = 10−16) [PET (MP) 2004] (a) AgI will be precipitated (b) AgCl will be precipitated (c) There will be no precipitate (d) Both AgCl and AgI will be precipitated

Solution. Answer (from key): (a) AgI will be precipitated. After mixing [I−] ≈ 5 × 10−4 M and [Ag+] = 5 × 10−9 M (half of the saturated 10−8 M). AgI: 2.5 × 10−12 > 10−16, precipitates. AgCl: 5 × 10−4 × 5 × 10−9 = 2.5 × 10−12 < 10−10, no.

Teacher's Note: Compute both ionic products after halving.

Exam Note: Only AgI has Ksp exceeded.

Question 234. Degree of dissociation (printed; read as ionisation constant Kb) of NH4OH in water is 1.8 × 10−5, then hydrolysis constant of NH4Cl is: [CECE (Bihar) Pre. 2004] (a) 1.8 × 10−5 (b) 1.8 × 10−10 (c) 5.55 × 10−5 (d) 5.55 × 10−10

Solution. Answer (from key): (d) 5.55 × 10−10. Kh = Kw/Kb = 10−14/(1.8 × 10−5) = 5.55 × 10−10. (The printed 'degree of dissociation' is taken as Kb.)

Teacher's Note: Kh = Kw/Kb.

Exam Note: Printed wording should read dissociation constant.

Question 235. What is the pH of 0.01 M glycine solution? For glycine Ka1 = 4.5 × 10−3; Ka2 = 1.7 × 10−10 at 298 K: [AIIMS 2004] (a) 3.02 (b) 6.94 (c) 7.06 (d) 10.02

Solution. Answer (from key): (c) 7.06. For a zwitterion pH = ½(pKa1 + pKa2) = ½(2.35 + 9.77) = 6.06. Printed key: (c) 7.06. Needs human check: with the printed Ka1 the pH is 6.06, which is not among the options; 7.06 follows only if Ka1 = 4.5 × 10−5.

Teacher's Note: Zwitterion pH is the average of the two pKa values.

Exam Note: Concentration does not matter for pH = ½(pK1 + pK2).

Question 236. The rapid change of pH near the stoichiometric point of an acid base titration is the basis of indicator detection. pH of the solution is related to the ratio of the concentrations of the conjugate acid HIn and base In− forms of the indicator by the expression: [CBSE (PMT) 2004] (a) log [In−]/[HIn] = pKIn − pH (b) log [HIn]/[In−] = pKIn − pH (c) log [HIn]/[In−] = pH − pKIn (d) log [In−]/[HIn] = pH − pKIn

Solution. Answer: (d) log [In−]/[HIn] = pH − pKIn. From KIn = [H+][In−]/[HIn]: pH = pKIn + log([In−]/[HIn]), i.e. log([In−]/[HIn]) = pH − pKIn. Corrected: the printed key gives (c), which has the ratio inverted; the correct option is (d).

Teacher's Note: Henderson form: base over acid equals pH minus pK.

Exam Note: Check which species sits in the numerator.

Question 237. A weak acid HX has the dissociation constant 1 × 10−5 M. It forms a salt NaX on reaction with alkali. The degree of hydrolysis of 0.1 M solution of NaX is: [IIT (S) 2004] (a) 0.0001% (b) 0.01% (c) 0.1% (d) 0.15%

Solution. Answer (from key): (b) 0.01%. Kh = Kw/Ka = 10−9; h = √(Kh/C) = √(10−9/0.1) = 10−4 = 0.01%.

Teacher's Note: h = √(Kw/(KaC)); then convert to percent.

Exam Note: 10−4 is 0.01%.

Question 238. The molar solubility (in mol litre−1) of a sparingly soluble salt MX4 is S. The corresponding solubility product Ksp is given by the relation: [AIEEE 2004] (a) S = (Ksp/128)1/4 (b) S = (218Ksp)1/4 (c) S = (256Ksp)1/5 (d) S = (Ksp/256)1/5

Solution. Answer (from key): (d) S = (Ksp/256)1/5. MX4 ⇌ M4+ + 4X−: Ksp = S(4S)4 = 256S5, so S = (Ksp/256)1/5.

Teacher's Note: Ksp = S(4S)4 = 256S5.

Exam Note: 44 = 256; fifth root.

Question 239. The Ksp of Mg(OH)2 is 1 × 10−12. 0.01 M Mg(OH)2 will precipitate at the limiting pH: [DPMT 2005] (a) 3 (b) 9 (c) 5 (d) 8

Solution. Precipitation starts when [Mg2+][OH−]2 = 10−12. 0.01 × [OH−]2 = 10−12, so [OH−] = 10−5 M, [H+] = 10−9 M and pH = 9. Answer: (b).

Teacher's Note: Set ionic product equal to Ksp to get the limiting [OH−], then convert to pH.

Exam Note: Precipitation onset: ionic product = Ksp.

Question 240. The correct expression for the solubility product of Ca3(PO4)2 is: [JEE (Orissa) 2005] (a) 108S5 (b) 27S5 (c) 16S4 (d) 81S4

Solution. Answer (from key): (a) 108S5. Ksp = (3S)3(2S)2 = 108S5.

Teacher's Note: Same as Question 202.

Exam Note: 27 × 4 = 108.

Question 241. The solubility product of a salt, having the general formula MX2, in water is 4 × 10−12. The concentration of M2+ ions in the aqueous solution of the salt is: [AIEEE 2005] (a) 2 × 10−6 M (b) 1 × 10−4 M (c) 1.6 × 10−4 M (d) 4 × 10−10 M

Solution. It is a ternary electrolyte, so Ksp = 4S3. 4 × 10−12 = 4S3, S = 10−4 M, and [M2+] = S = 10−4 M. Answer: (b).

Teacher's Note: For MX2, Ksp = 4S3 and [M2+] equals S.

Exam Note: [M2+] = S, [X−] = 2S.

Question 242. The ionization constant of ammonium hydroxide is 1.77 × 10−5 at 298 K. Hydrolysis constant of ammonium chloride is: [CBSE (PMT) 2009] (a) 5.65 × 10−12 (b) 5.65 × 10−10 (c) 6.50 × 10−12 (d) 5.65 × 10−13

Solution. Kh = Kw/Kb = 10−14/(1.77 × 10−5) = 5.65 × 10−10. Answer: (b).

Teacher's Note: Salt of weak base and strong acid: Kh = Kw/Kb.

Exam Note: Use Kb of the base, not Ka.

Question 243. The Ka values of formic acid and acetic acid are respectively 1.77 × 10−4 and 1.75 × 10−5. The ratio of the acid strength of 0.1 M acids is: [PMT (Kerala) 2005] (a) 10 (b) 3.178 (c) 0.3 (d) 0.1 (e) 100

Solution. Answer (from key): (b) 3.178. Relative strength = √(K1/K2) = √(1.77 × 10−4/1.75 × 10−5) = √10.11 = 3.18.

Teacher's Note: Relative strength is the ratio of √Ka.

Exam Note: Not the plain ratio 10.1.

Question 244. Equal volumes of the following Ca2+ and F− solutions are mixed. In which solution will precipitation occur? Ksp of CaF2 = 1.7 × 10−10. 1. 10−2 M Ca2+ + 10−5 M F− 2. 10−3 M Ca2+ + 10−3 M F− 3. 10−4 M Ca2+ + 10−2 M F− 4. 10−2 M Ca2+ + 10−3 M F−. Select the correct answer using the codes: (a) in 4 only (b) in 1 and 2 (c) in 3 and 4 (d) in 2, 3 and 4 (e) in all of these [PMT (Kerala) 2005]

Solution. After mixing equal volumes each concentration halves. Ionic products [Ca2+][F−]2: (1) 5 × 10−3 × (5 × 10−6)2 = 1.25 × 10−13; (2) 5 × 10−4 × (5 × 10−4)2 = 1.25 × 10−10; (3) 5 × 10−5 × (5 × 10−3)2 = 1.25 × 10−9; (4) 5 × 10−3 × (5 × 10−4)2 = 1.25 × 10−9. Precipitation (product > 1.7 × 10−10) occurs in 3 and 4. Corrected: the printed key gives (d) (2, 3 and 4), which holds only if the dilution on mixing is ignored; with dilution the answer is (c). Needs human check.

Teacher's Note: Halve concentrations on mixing, then compare ionic product with Ksp.

Exam Note: Case 2 is borderline: dilution decides it.

Question 245. Given, pH of a solution A is 3 and it is mixed with another solution B having pH 2. If both are mixed, then the pH of the solution will be: [BHU (Pre.) 2005] (a) 3.2 (b) 1.9 (c) 3.4 (d) 3.5

Solution. Answer (from key): (b) 1.9. Printed key: (b) 1.9. For equal volumes [H+] = (10−3 + 10−2)/2 = 5.5 × 10−3 M and pH = 2.26. Needs human check: 2.26 is not among the options; the key's 1.9 does not follow from equal volumes.

Teacher's Note: Equal volumes: average [H+], then −log.

Exam Note: Never average the pH values.

Question 246. When 10 mL of 0.1 M acetic acid (pKa = 5) is titrated against 10 mL of 0.1 M ammonia solution (pKb = 5) the equivalent point will occur at pH: [AIIMS 2005] (a) 5 (b) 6 (c) 7 (d) 9

Solution. Answer (from key): (c) 7. The salt is ammonium acetate with pKa = pKb, so pH = 7 + ½(pKa − pKb) = 7.

Teacher's Note: Equal pKa and pKb give a neutral salt solution.

Exam Note: pH = 7 + ½(pKa − pKb).

Question 247. On adding 0.1 M solution each of Ag+, Ba2+ and Ca2+ in a Na2SO4 solution, the species first precipitated is: [DCE 2005] (Ksp BaSO4 = 10−11, Ksp CaSO4 = 10−6, Ksp Ag2SO4 = 10−5) (a) Ag2SO4 (b) BaSO4 (c) CaSO4 (d) all of these

Solution. Answer: (b) BaSO4. [SO42−] needed: BaSO4 10−11/0.1 = 10−10 M; CaSO4 10−6/0.1 = 10−5 M; Ag2SO4 10−5/(0.1)2 = 10−3 M. BaSO4 needs least sulphate, so it precipitates first. Corrected: the printed key gives (a); the correct option is (b).

Teacher's Note: Compare sulphate concentration needed for each salt.

Exam Note: Smallest required [SO42−] precipitates first.

Question 248. When 0.1 mole of CH3NH2 (ionization constant, Kb = 5 × 10−4) is mixed with 0.08 mole HCl and the volume is made up to 1 litre, find the [H+] of resulting solution: [IIT 2005] (a) 8 × 10−2 (b) 2 × 10−11 (c) 1.23 × 10−4 (d) 8 × 10−11

Solution. CH3NH2 + HCl → CH3NH3+Cl−: 0.1 mol and 0.08 mol give 0.02 mol base left and 0.08 mol salt (basic buffer). pOH = pKb + log([salt]/[base]) = −log(5 × 10−4) + log(0.08/0.02) = 3.903. pH = 10.0967, so [H+] = antilog(−10.0967) = 8 × 10−11 M. Answer: (d).

Teacher's Note: Partial neutralisation of a weak base leaves a basic buffer; apply the Henderson equation for bases.

Exam Note: pOH = pKb + log(salt/base).

Question 249. At 25 °C, the dissociation constant of a base BOH is 1 × 10−12. The concentration of hydroxyl ions in 0.01 M aqueous solution of the base would be: [CBSE-PMT (Pre.) 2005] (a) 10−5 mol L−1 (b) 10−6 mol L−1 (c) 2 × 10−6 mol L−1 (d) 10−7 mol L−1

Solution. [OH−] = √(CKb) = √(0.01 × 10−12) = 10−7 mol L−1. Answer: (d). (This is the book's answer; strictly, water's own 10−7 is comparable here, but the expected option is (d).)

Teacher's Note: Weak base: [OH−] = √(KbC).

Exam Note: Use √(KbC); state the formula to earn marks.

Question 250. Which of the following solutions has pH equal to 10? [UGET (Manipal) 2006] (a) 10−4 M KOH (b) 10−10 M KOH (c) 10−10 M HCl (d) 10−4 M HCl

Solution. Answer (from key): (a) 10−4 M KOH. 10−4 M KOH has pOH = 4, so pH = 10.

Teacher's Note: Strong base: pOH = −log C, pH = 14 − pOH.

Exam Note: Very dilute solutions approach pH 7.

Question 251. A weak monobasic acid is half neutralised by a strong base. If the pH of the solution is 5.4, its pKa is: [JEE (Orissa) 2006] (a) 6.8 (b) 2.7 (c) 5.4 (d) 10.8

Solution. At half neutralisation [Acid] = [Salt]. pH = pKa + log([Salt]/[Acid]) = pKa + log 1, so 5.4 = pKa and pKa = 5.4. Answer: (c).

Teacher's Note: At half neutralisation the log term vanishes: pH = pKa.

Exam Note: Half-neutralisation point: pH equals pKa.

Question 252. ZnS is not precipitated by passing H2S in acidic medium but CuS precipitated. The reason for it is: [JEE (Orissa) 2006] (a) Ksp CuS ≪ Ksp ZnS (b) Ksp CuS ≫ Ksp ZnS (c) Ksp CuS = Ksp ZnS (d) none of these

Solution. Answer (from key): (a) Ksp CuS ≪ Ksp ZnS. CuS has a far smaller Ksp, so even the low [S2−] in acid exceeds its Ksp, while ZnS needs a higher [S2−].

Teacher's Note: Lower Ksp precipitates at lower [S2−].

Exam Note: Acid keeps [S2−] low.

Question 253. Solubility product of salt AB is 1 × 10−8 M2 in a solution, in which the concentration of A+ ions is 10−3 M. The salt will precipitate when the concentration of B− ions is kept: [KCET 2006] (a) between 10−8 M to 10−7 M (b) between 10−7 M to 10−8 M (c) > 10−5 M (d) < 10−8 M

Solution. Answer (from key): (c) > 10−5 M. Precipitation needs [B−] > Ksp/[A+] = 10−8/10−3 = 10−5 M.

Teacher's Note: Threshold is Ksp/[A+].

Exam Note: Precipitate needs concentration above the threshold.

Question 254. NaOH(aq.), HCl(aq.) and NaCl(aq.) have concentration of 10−3 M each. Their pH will be respectively: [PMT (Uttarakhand) 2006] (a) 10, 6, 2 (b) 11, 3, 7 (c) 10, 3, 7 (d) 10, 4, 7

Solution. Answer (from key): (b) 11, 3, 7. NaOH: pOH 3, pH 11; HCl: pH 3; NaCl: neutral, pH 7.

Teacher's Note: Strong base, strong acid, neutral salt.

Exam Note: pH of NaOH is 11, not 10.

Question 255. The weak acid, HA, has a Ka of 1.00 × 10−5. If 0.1 mol of this acid is dissolved in one litre of water, the percentage of acid dissociated at equilibrium is closest to: [CBSE (Med.) 2007] (a) 1% (b) 99.9% (c) 0.1% (d) 99%

Solution. HA ⇌ H+ + A−; Ka = Cα2/(1 − α) ≈ Cα2. α = √(Ka/C) = √(10−5/0.1) = 10−2. % ionisation = α × 100 = 1. Answer: (a).

Teacher's Note: Weak acid with small α: α = √(Ka/C), then multiply by 100.

Exam Note: Multiply α by 100 for percentage.

Question 256. At 25 °C, the value of pKb (Kb being the dissociation constant as a base) for NH3 in aqueous solution is 4.7. What is the pH of 0.1 M aqueous solution of NH4Cl with 0.01 M NH3 (approximately)? [SCRA 2007] (a) 8.3 (b) 9 (c) 9.5 (d) 10

Solution. Basic buffer: pOH = pKb + log([NH4Cl]/[NH4OH]) = 4.7 + log(0.1/0.01) = 5.7. pH = 14 − 5.7 = 8.3. Answer: (a).

Teacher's Note: NH3 with its salt is a basic buffer; use the base form of the Henderson equation.

Exam Note: pOH from buffer formula, then pH = 14 − pOH.

Question 257. The ionisation of strong electrolytes in acetic acid compared to that in water is: [CET (J&K) 2007] (a) weak, low (b) strong, more (c) medium, the same (d) no ionisation, 100%

Solution. Answer (from key): (a) weak, low. Acetic acid has a much lower dielectric constant and weaker proton-accepting power than water, so ionisation of strong electrolytes there is weak or low.

Teacher's Note: Solvent polarity governs ionisation.

Exam Note: Low dielectric constant means less ionisation.

Question 258. By adding a little of acid or base, the change in pH of blood is not significant, because blood: [PET (Raj.) 2006] (a) has iron as a part of molecule (b) is a body fluid (c) has serum protein which works as buffer (d) is easily coagulated

Solution. Answer (from key): (c) has serum protein which works as buffer. Blood contains buffer systems (proteins and bicarbonate/carbonic acid) that resist pH change.

Teacher's Note: Buffer action keeps blood pH steady.

Exam Note: Name the buffer, not iron.

Question 259. 2.5 mL of 2/5 M weak monoacidic base (Kb = 1 × 10−12 at 25 °C) is titrated with 2/15 M HCl in water at 25 °C. The concentration of H+ ion at equivalence point is: (Kw = 1 × 10−14 at 25 °C) [IIT 2008] (a) 3.7 × 10−13 M (b) 3.2 × 10−7 M (c) 3.2 × 10−2 M (d) 2.7 × 10−2 M

Solution. BOH + HCl → BCl + H2O. At equivalence M1V1 (base) = M2V2 (acid): (2/5) × 2.5 = (2/15) × V2, so V2 = 7.5 mL. Total volume = 7.5 + 2.5 = 10 mL. Concentration of salt: (2/5) × 2.5 = M2 × 10, so M2 = 0.1 M. pH = ½[pKw − pKb − log C] = ½[14 − 12 − (−1)] = 1.5. [H+] = antilog(−1.5) = 0.032 M = 3.2 × 10−2 M. Answer: (c).

Teacher's Note: Find the equivalence volume, then salt concentration after dilution, then use salt-of-weak-base pH formula.

Exam Note: Dilution at equivalence: use total volume.

Question 260. Solubility product constants (Ksp) of salts of types MX, MX2, M3X at temperature T are 4 × 10−8, 3.2 × 10−14 and 2.7 × 10−15 respectively. Solubility (mol dm−3) of the salts at temperature T are in the order: [IIT 2008] (a) MX > MX2 > M3X (b) M3X > MX2 > MX (c) MX2 > M3X > MX (d) MX > M3X > MX2

Solution. Solubility (S1) of MX = √Ksp = √(4 × 10−8) = 2 × 10−4 M. Solubility (S2) of MX2 = (Ksp/4)1/3 = (3.2 × 10−14/4)1/3 = 2 × 10−5 M. Solubility (S3) of M3X = (Ksp/27)1/4 = (2.7 × 10−15/27)1/4 = 10−4 M. Hence S1 > S3 > S2, i.e. MX > M3X > MX2. Answer: (d).

Teacher's Note: Use Ksp = S2, 4S3, 27S4 for the three types, then compare S.

Exam Note: Different stoichiometry: compare solubilities, not Ksp.

Question 261. In aqueous solution, the ionization constants for carbonic acid are K1 = 4.2 × 10−7 and K2 = 4.8 × 10−11. Select the correct statement for a saturated 0.034 M solution of the carbonic acid: [AIEEE 2010] (a) The concentrations of H+ and HCO3− are approximately equal (b) The concentration of H+ is double that of CO32− (c) The concentration of CO32− is 0.034 M (d) The concentration of CO32− is greater than that of HCO3−

Solution. Answer: (a). First ionisation dominates: [H+] ≈ [HCO3−] = √(K1C) = √(4.2 × 10−7 × 0.034) ≈ 1.2 × 10−4 M, while [CO32−] ≈ K2 = 4.8 × 10−11 M, so only (a) holds. Corrected: the printed key gives (b), which is false.

Teacher's Note: Second ionisation is negligible: [CO32−] ≈ K2.

Exam Note: [H+] ≈ [HCO3−] for a diprotic weak acid.

Set-2: Questions with More Than One Correct Answer

Set-2 Q1. For dissociation constant (K) and ionic product (Kw) of water which is correct? (a) K > Kw (b) Kw > K (c) Kw = K (d) None of these

Solution. Answer (from key): (b). K = [H+][OH−]/[H2O] = Kw/55.5, so Kw > K.

Teacher's Note: K is Kw divided by [H2O] = 55.5 M.

Exam Note: Divide Kw by 55.5 to get K.

Set-2 Q2. Which is an example of auto protolysis? (a) H2O + H2O ⇌ H3O+ + OH− (b) NH3 + NH3 ⇌ NH4+ + NH2− (c) H2SO4 + H2SO4 ⇌ H3SO4+ + HSO4− (d) All of the above

Solution. Answer (from key): (d). In each case one solvent molecule transfers a proton to another identical molecule, which is auto protolysis.

Teacher's Note: Same molecule acts as acid and base.

Exam Note: All three are self-ionisations.

Set-2 Q3. If concentrations of two acids are same, their relative strengths can be compared by: (a) α1/α2 (b) K1/K2 (c) [H+]1/[H+]2 (d) √(K1/K2)

Solution. Answer (from key): (a), (c), (d). At equal concentration, relative strength = α1/α2 = [H+]1/[H+]2 = √(K1/K2); the plain ratio K1/K2 is not the strength ratio.

Teacher's Note: α, [H+] and √K all scale together.

Exam Note: Plain K ratio is not the strength ratio.

Set-2 Q4. Three bases XOH, YOH and ZOH have pKb values 2, 3 and 4 respectively; the strongest conjugate acid is: (a) XOH2+ (b) YOH2+ (c) ZOH2+ (d) all are same

Solution. Answer (from key): (c). ZOH has the largest pKb (weakest base), so its conjugate acid ZOH2+ is the strongest.

Teacher's Note: Weakest base has the strongest conjugate acid.

Exam Note: Largest pKb means weakest base.

Set-2 Q5. Aqueous solution of HNO3, KOH, CH3COOH and CH3COONa of identical concentrations are provided. The pair(s) of solutions which form a buffer upon mixing is (are): [IIT 2010] (a) HNO3 and CH3COOH (b) KOH and CH3COONa (c) HNO3 and CH3COONa (d) CH3COOH and CH3COONa

Solution. Answer (from key): (c), (d). Equal volumes of HNO3 and CH3COONa give CH3COOH plus unreacted CH3COONa only if acid is limiting (partial conversion), and CH3COOH with CH3COONa is directly a buffer. The other two pairs lack a weak acid/conjugate pair.

Teacher's Note: Need a weak acid with its salt, possibly formed in situ.

Exam Note: Strong acid plus a weak-acid salt can create a buffer.

Set-2 Q6. Four solutions of NH4Cl are taken with concentrations 1 M, 0.1 M, 0.01 M and 0.001 M. Their degree of hydrolysis are h1, h2, h3 and h4. What is the graduation of degree of hydrolysis? (a) h1 > h2 > h3 > h4 (b) h1 = h2 = h3 = h4 (c) h4 > h3 > h2 > h1 (d) None of these

Solution. Answer (from key): (c). h = √(Kh/C), so the more dilute the solution, the larger the degree of hydrolysis: h4 > h3 > h2 > h1.

Teacher's Note: Hydrolysis grows on dilution: h ∝ 1/√C.

Exam Note: Lowest concentration, highest h.

Set-2 Q7. Which has maximum solubility AB, AB2, AB3 or AB4 if Ksp for all the salts are 10−10? (a) AB (b) AB2 (c) AB3 (d) AB4

Solution. Answer (from key): (d). S: AB = 10−5; AB2 = (10−10/4)1/3 = 2.9 × 10−4; AB3 = (10−10/27)1/4 = 1.4 × 10−3; AB4 = (10−10/256)1/5 = 3.3 × 10−3 M, the largest.

Teacher's Note: Equal Ksp: more ions per formula unit means higher S.

Exam Note: Compute S from 4S3, 27S4, 256S5.

Set-2 Q8. Dissociation of an indicator can be considered as HIn ⇌ H+ + In−. Colours of HIn and In− are different. Which statement is correct? (a) Solution assumes colour of HIn when pH = pKIn − 1 (b) Solution assumes colour of In− when pH = pKIn + 1 (c) Solution assumes colour of HIn− when pH = pKIn + 1 (d) Solution assumes colour of In− when pH = pKIn − 1

Solution. Answer (from key): (a), (b). pH = pKIn + log([In−]/[HIn]). At pH = pKIn − 1 the ratio is 1 : 10 (HIn colour); at pH = pKIn + 1 it is 10 : 1 (In− colour).

Teacher's Note: Ten-to-one ratio at one pH unit from pKIn.

Exam Note: pH = pK ± 1 gives tenfold dominance.

Set-2 Q9. The % error in [H+] made by neglecting the ionisation of water in 10−6 M NaOH is: (a) 1% (b) 2% (c) 3% (d) 4%

Solution. Answer (from key): (a). Exact: [OH−] = 1.0099 × 10−6, so [H+] = 9.9 × 10−9 M, whereas neglecting water gives 10−8 M. Error = (10 − 9.9)/10 ≈ 1%.

Teacher's Note: Solve the quadratic for [OH−] including water.

Exam Note: Compare 10−8 with 9.9 × 10−9.

Set-2 Q10. 50 mL N/10 NaOH solution is mixed with 50 mL N/20 HCl solution. The resulting solution will: (a) turn phenolphthalein solution pink (b) turn blue litmus red (c) turn methyl orange red (d) [H+] < [OH−]

Solution. Answer (from key): (a), (d). NaOH = 5 meq, HCl = 2.5 meq; excess OH− = 2.5 meq in 100 mL, so the solution is basic: phenolphthalein turns pink and [H+] < [OH−].

Teacher's Note: Subtract meq: leftover base makes it alkaline.

Exam Note: Excess strong base gives pH about 12.4.

Set-2 Q11. An acid indicator HIn has Ka = 3 × 10−5, the acid form is red and basic form is blue. Which is correct? (a) pH = 5 when indicator is 75% red (b) pH = 4.05 when indicator is 75% red (c) pH = 5 when indicator is 75% blue (d) pH = 4.05 when indicator is 75% blue

Solution. Answer (from key): (b), (c). pKa = 4.52. 75% red: pH = 4.52 + log(25/75) = 4.05. 75% blue: pH = 4.52 + log(75/25) = 5.0.

Teacher's Note: Henderson: pH = pKa + log(base/acid).

Exam Note: Red is the acid form, blue the base form.

Set-2 Q12. Which of the following will function as buffer? [IAS (Pre.) 1997] (a) NaCl + NaOH (b) Borax + boric acid (c) NaH2PO4 + Na2HPO4 (d) NH4Cl + NH4OH

Solution. Answer (from key): (b), (d). A weak acid with its salt (boric acid and borax) and a weak base with its salt (NH4OH/NH4Cl) are buffers. NaCl + NaOH has no weak species. As printed, (c) is not marked by the key although NaH2PO4 + Na2HPO4 is a phosphate buffer in practice. Needs human check.

Teacher's Note: Weak species plus conjugate partner.

Exam Note: Strong base with salt does not buffer.

Set-2 Q13. Choose the correct statement(s): (a) pH of an acidic buffer increases if more salt is added (b) pH of a basic buffer decreases if more salt is added (c) In a saturated solution, ionic product is equal to its solubility product (d) The term solubility product is only for sparingly soluble salts

Solution. Answer (from key): (a), (b), (c). pH = pKa + log(salt/acid) rises with more salt; for a basic buffer pOH falls so pH falls; saturation means ionic product = Ksp. Ksp can be defined for any salt, so (d) is not accepted.

Teacher's Note: Henderson equation for both buffers; Ksp at saturation.

Exam Note: Ksp is defined at saturation for any salt.

Set-2 Q14. In the following reaction, [Cu(H2O)3(OH)]+ (A) + [Al(H2O)6]3+ (B) → [Cu(H2O)4]2+ (C) + [Al(H2O)5(OH)]2+ (D): (a) (A) is an acid and (B) is a base (b) (A) is a base and (B) is an acid (c) (C) is the conjugate acid of (A) and (D) is the conjugate base of (B) (d) (C) is the conjugate base of (A) and (D) is the conjugate acid of (B)

Solution. Answer (from key): (b), (c). A accepts a proton to give C, so A is a base and C its conjugate acid; B donates a proton to give D, so B is an acid and D its conjugate base.

Teacher's Note: Gains H+ means base; loses H+ means acid.

Exam Note: Track proton movement.

Set-2 Q15. Which among the following will not react with NaOH or which is not acid salt? [BHU (Med.) 2007] (a) NaH2PO2 (b) Na2HPO3 (c) Na2HPO2 (d) NaHCO3

Solution. Answer (from key): (a), (b), (c). H3PO2 is monobasic and H3PO3 is dibasic, so NaH2PO2 and Na2HPO3 have no replaceable H (their H is bonded to P); the printed Na2HPO2 is likewise not an acid salt. NaHCO3 still reacts with NaOH.

Teacher's Note: Hydrogens attached to P are not acidic.

Exam Note: Acid salts still contain O–H hydrogen.

Set-2 Q16. If equal volumes of 0.1 M HBr and 0.1 M KOH are mixed, then which of the following is/are correct about the resulting solution? Codes: (a) 1, 2 and 3 are correct (b) 1 and 2 are correct (c) 2 and 4 are correct (d) 1 and 3 are correct. Statements: (1) [H3O+] = 1.0 × 10−7 mol L−1 (2) [OH−] = 1.0 × 10−7 mol L−1 (3) [K+] = 0.05 mol L−1 (4) [Br−] = 0.10 mol L−1

Solution. Answer (from key): (a). Exact neutralisation gives KBr in 2× volume: pH 7 so statements 1 and 2 hold, [K+] = 0.05 M (3). [Br−] is also 0.05 M, so (4) is false. Statements 1, 2 and 3 are correct.

Teacher's Note: Equal volumes halve the 0.1 M concentrations.

Exam Note: Check statement 4: Br− is also halved.

Set-2 Q17. Which of the following solutions will be acidic? Codes: (a) 1, 2 and 3 (b) 1 and 2 (c) 2 and 4 (d) 1 and 3. Statements: (1) 0.1 M FeSO4 (2) 0.1 M (NH4)2SO4 (3) 0.1 M CH3COONa (4) 0.1 M NH4OH

Solution. Answer (from key): (b). FeSO4 (Fe2+) and (NH4)2SO4 (NH4+) are salts of weak bases with strong acid, so they are acidic; CH3COONa and NH4OH are basic. Statements 1 and 2.

Teacher's Note: Salts of weak base and strong acid are acidic.

Exam Note: Spot the weak-base cations.

Set-2 Q18. In a buffer solution consisting NaH2PO4 and Na2HPO4: Codes: (a) 1, 2 and 3 (b) 1 and 2 (c) 2 and 4 (d) 1 and 3. Statements: (1) NaH2PO4 is acid and Na2HPO4 is salt (2) The pH of solution can be calculated using pH = pK2 + log([HPO42−]/[H2PO4−]) (3) Na2HPO4 is acid and NaH2PO4 is salt (4) The pH can not be calculated [BHU (Mains) 2010]

Solution. Answer (from key): (a). As given in the key; statements 1 and 2 are correct. Statement 3 reverses the roles of acid and salt and is false in the usual treatment. Needs human check: the printed key (a) includes statement 3; by the standard buffer treatment the answer would be (b).

Teacher's Note: H2PO4− is the acid, HPO42− its conjugate base.

Exam Note: Use pK2 in the Henderson equation.

Assertion-Reason Type Questions

A-R Q1. Assertion (A): A very dilute acidic solution of Cd2+ and Ni2+ gives yellow precipitate of CdS on passing hydrogen sulphide. Reason (R): Solubility product of CdS is more than that of NiS.

Solution. Answer (from key): (c). A is true; R is false. Ksp(CdS) is smaller than Ksp(NiS), so CdS precipitates first in acid.

Teacher's Note: Lower Ksp precipitates at the low [S2−] of acid.

Exam Note: Reason is reversed.

A-R Q2. Assertion (A): In the titration of Na2CO3 with HCl using methyl orange indicator, the volume of the acid required at the equivalence point is twice that of the acid required using phenolphthalein as indicator. [IIT 1991] Reason (R): Two moles of HCl are required for the complete neutralisation of one mole of Na2CO3.

Solution. Answer (from key): (b). A is true; R is true. Phenolphthalein marks conversion to NaHCO3 (1 mol HCl) and methyl orange the complete reaction (2 mol); the reason is true but the key treats it as not the direct explanation.

Teacher's Note: Phenolphthalein sees half, methyl orange the whole.

Exam Note: Half versus complete neutralisation.

A-R Q3. Assertion (A): The pH of an aqueous solution of acetic acid remains unchanged on the addition of sodium acetate. Reason (R): The ionisation of acetic acid is suppressed by the addition of sodium acetate.

Solution. Answer (from key): (d). A is false; R is true. Sodium acetate suppresses ionisation (common ion), lowering [H+] and raising pH, so A is false. (The book maps the 'A false' cases to code (d).)

Teacher's Note: Common ion lowers [H+], so pH rises.

Exam Note: pH changes; A is false.

A-R Q4. Assertion (A): In acidic medium, Zn2+ is not precipitated by S2− ions. Reason (R): Common ion effect reduces the concentration of S2− ions to the minimum level.

Solution. Answer (from key): (a). A is true; R is true. H+ suppresses H2S ionisation, keeping [S2−] below what ZnS needs, so R explains A.

Teacher's Note: Acid keeps [S2−] too low for ZnS.

Exam Note: R directly explains A.

A-R Q5. Assertion (A): In the acid-base titration involving a strong base and a weak acid, methyl orange can be used as an indicator. Reason (R): Methyl orange changes its colour in pH range 3 to 5.

Solution. Answer (from key): (d). A is false; R is not accepted by the key (methyl orange range is 3.1-4.4). The end point of a weak acid with a strong base is basic, so methyl orange is unsuitable.

Teacher's Note: Basic end point needs phenolphthalein.

Exam Note: Range 3.1-4.4 is acidic, unsuitable here.

A-R Q6. Assertion (A): A mixture of sodium acetate and sodium propionate forms a buffer solution. Reason (R): A buffer solution reacts with small quantities of hydrogen ions or hydroxyl ions and keeps the pH almost same.

Solution. Answer: (d). A is false; R is true. Two salts of weak acids have no weak acid present, so they do not form a buffer. Corrected: the printed key gives (b); A is false so the key letter should be (d).

Teacher's Note: A buffer needs a weak acid and its conjugate base.

Exam Note: Two basic salts are not a buffer.

A-R Q7. Assertion (A): When small amount of an acid or base is added to pure water its pH undergoes a change. Reason (R): Addition of an acid or a base increases the degree of ionisation of water.

Solution. Answer (from key): (c). A is true; R is false. Pure water is unbuffered so pH changes, but added H+ or OH− suppresses ionisation of water.

Teacher's Note: Water has no buffer capacity.

Exam Note: R wrongly says ionisation increases.

A-R Q8. Assertion (A): At 25 °C, the pH of 10−8 M HCl is 8. Reason (R): pH of an acidic solution is always below 7 at 25 °C.

Solution. Answer (from key): (d). A is false; R is true. Water's H+ dominates; pH is about 6.98, not 8. (Key letter (d) = A false.)

Teacher's Note: Acid cannot produce pH above 7.

Exam Note: Include water's 10−7 M.

A-R Q9. Assertion (A): The addition of silver ions to a mixture of aqueous sodium chloride and sodium bromide solution, will first precipitate AgBr rather than AgCl. Reason (R): The value of Ksp of AgCl < Ksp of AgBr. [AIIMS 2004]

Solution. Answer (from key): (c). A is true; R is false. AgBr has the smaller Ksp (5 × 10−13 vs 1.8 × 10−10), so it precipitates first; R states the reverse.

Teacher's Note: Smaller Ksp precipitates first.

Exam Note: Compare the two Ksp values.

A-R Q10. Assertion (A): Sb(III) is not precipitated as sulphide when in its alkaline solution H2S is passed. Reason (R): Concentration of S2− ions in alkaline medium is inadequate for precipitation. [AIIMS 2004]

Solution. Answer (from key): (c). A is true; R is false. Alkaline medium raises [S2−] (and Sb2S3 dissolves as thioantimonite); R says it is inadequate, which is wrong.

Teacher's Note: Base increases sulphide ion concentration.

Exam Note: R states the opposite of fact.

A-R Q11. Assertion (A): Sb2S3 is not soluble in yellow ammonium sulphide. Reason (R): The common ion effect due to S2− ions reduces the solubility of Sb2S3. [AIIMS 2006]

Solution. Answer (from key): (d). A is false; R is true as a general statement. Sb2S3 dissolves in yellow ammonium sulphide by forming thioantimonate, so A is false.

Teacher's Note: Sulphide complexes dissolve group IIB sulphides.

Exam Note: Complexation overrides common ion effect.

A-R Q12. Assertion (A): H2SO4 acts as a base in the presence of HClO4. Reason (R): Perchloric acid is stronger acid than H2SO4.

Solution. Answer (from key): (a). A is true; R is true. Stronger HClO4 donates a proton to H2SO4, which acts as a base; R explains A.

Teacher's Note: Relative acid strength decides who donates.

Exam Note: Stronger acid protonates the weaker.

A-R Q13. Assertion (A): pH of a neutral solution is always 7. Reason (R): pH of a solution does not depend upon temperature.

Solution. Answer (from key): (d). A is false; R is false. Neutral pH = ½pKw which changes with temperature.

Teacher's Note: Kw depends on temperature.

Exam Note: Neutral pH is 7 only at 25 °C.

A-R Q14. Assertion (A): pH of 10−8 M HCl is not equal to 8. Reason (R): HCl does not dissociate properly in very dilute solution.

Solution. Answer (from key): (c). A is true; R is false. pH is about 6.98 because of water's H+; HCl is fully dissociated even when dilute.

Teacher's Note: Strong acid is always fully ionised.

Exam Note: Reason is the false part.

A-R Q15. Assertion (A): If a solution with pH = 2 is diluted to double the volume, the pH of the solution will fall to 1. Reason (R): pH is inversely proportional to the volume of the solution.

Solution. Answer (from key): (d). A is false; R is false. Dilution lowers [H+], so pH rises (to about 2.3), and pH is logarithmic, not inversely proportional.

Teacher's Note: Dilution raises pH.

Exam Note: pH is a log scale.

A-R Q16. Assertion (A): If HCl gas is passed through saturated NaCl solution, solid NaCl starts separating out. Reason (R): HCl decreases the solubility product of NaCl.

Solution. Answer (from key): (c). A is true; R is false. Common ion Cl− makes the ionic product exceed Ksp; Ksp itself is constant.

Teacher's Note: Common ion causes precipitation, Ksp stays.

Exam Note: Ksp does not change.

A-R Q17. Assertion (A): pH of a buffer changes with temperature. Reason (R): Ionic product of water (Kw) changes with temperature.

Solution. Answer (from key): (a). A is true; R is true. Ka, Kw and hence pH vary with temperature, so R accounts for A.

Teacher's Note: Equilibrium constants are temperature dependent.

Exam Note: Temperature changes Ka and Kw.

A-R Q18. Assertion (A): I2 + I− → I3−; in the above reaction I2 is Lewis base. Reason (R): Electron pair acceptor is Lewis base.

Solution. Answer (from key): (d). A is false; R is false. I2 accepts a pair (Lewis acid) and an acceptor is a Lewis acid, so both are false.

Teacher's Note: Acceptor is acid, donor is base.

Exam Note: Both statements reversed.

A-R Q19. Assertion (A): Phenolphthalein is used as indicator during the titration of oxalic acid against sodium hydroxide. Reason (R): The pH range of phenolphthalein is from 8 to 9.6.

Solution. Answer (from key): (a). A is true; R is true. The end point (sodium oxalate) is basic, falling in phenolphthalein's range, which explains the choice.

Teacher's Note: Weak acid with strong base: basic end point.

Exam Note: Match indicator range to end point.

A-R Q20. Assertion (A): If Kip is less than Ksp, the precipitate is formed. Reason (R): Solubility product (Ksp) is the highest limit of ionic product of electrolyte solutions.

Solution. Answer: (b). A is false; R is true. Precipitation needs Kip > Ksp, so A is false. Corrected: the printed key gives (b); with A false the letter should be (d).

Teacher's Note: Precipitate forms when ionic product exceeds Ksp.

Exam Note: Kip above Ksp precipitates.

A-R Q21. Assertion (A): H3PO3 is a dibasic acid. Reason (R): There are two hydrogen atoms directly attached to phosphorus. [AIIMS 2007]

Solution. Answer (from key): (c). A is true; R is false. H3PO3 has two P–OH groups and one P–H, so it is dibasic; only one H is attached to P.

Teacher's Note: Basicity counts P–OH groups.

Exam Note: One P–H, two P–OH.

A-R Q22. Assertion (A): NaCl is precipitated when HCl gas is passed in a saturated solution of NaCl. Reason (R): HCl is a strong acid. [AIIMS 2007]

Solution. Answer (from key): (b). A is true; R is true. Precipitation is due to the common ion Cl−, not to the strength of HCl.

Teacher's Note: Common ion effect, not acid strength.

Exam Note: R is true but irrelevant.

A-R Q23. Assertion (A): On mixing 500 mL of 10−6 M Ca2+ ion and 500 mL of 10−6 MF− ion, the precipitate of CaF2 will be obtained. Ksp (CaF2) = 10−18. Reason (R): Ksp is greater than ionic product, precipitate will be obtained. [AIIMS 2007]

Solution. Answer (from key): (d). A is false; R is false. Ionic product = 5 × 10−7 × (5 × 10−7)2 = 1.25 × 10−19 < Ksp, so no precipitate; and precipitation needs ionic product greater than Ksp.

Teacher's Note: Halve concentrations, compute ionic product.

Exam Note: Ionic product below Ksp: no precipitate.

A-R Q24. Assertion (A): The aqueous solution of CH3COONa is alkaline in nature. Reason (R): Acetate ion undergoes anionic hydrolysis. [EAMCET 2008]

Solution. Answer (from key): (a). A is true; R is true. CH3COO− + H2O ⇌ CH3COOH + OH− produces OH−.

Teacher's Note: Anion hydrolysis releases OH−.

Exam Note: Hydrolysis explains alkalinity.

A-R Q25. Assertion (A): An aqueous solution of ammonium acetate can act as a buffer. Reason (R): Acetic acid is a weak acid and NH4OH is a weak base. [EAMCET 2010]

Solution. Answer (from key): (c). A is true; R is true. Ammonium acetate solution resists pH change because both ions hydrolyse equally, and R states why. Needs human check: the printed key (c) calls R false, though R is true.

Teacher's Note: Both ions hydrolyse equally, holding pH near 7.

Exam Note: Key treats R as incorrect; verify.

A-R Q26. Assertion (A): [Al(H2O)6]3+ is a stronger acid than [Mg(H2O)6]2+. Reason (R): Size of [Al(H2O)6]3+ is smaller than [Mg(H2O)6]2+ and possesses more effective nuclear charge. [AIIMS 2010]

Solution. Answer (from key): (a). A is true; R is true. Higher charge density polarises O–H bonds more, easing H+ release.

Teacher's Note: Charge density controls hydrated-ion acidity.

Exam Note: Smaller, more highly charged cation is more acidic.

Brain Storming Problems: Objective Questions for IIT Aspirants

BS Q1. The pH value of 10−3 M aqueous solution of NaCl is: (a) 7 (b) 3 (c) 11 (d) 14

Solution. Answer (from key): (a). NaCl is the salt of a strong acid and a strong base, so the solution is neutral with pH 7.

Teacher's Note: Strong acid and strong base salt does not hydrolyse.

Exam Note: Neutral salt gives pH 7.

BS Q2. The acidic buffer solution can be prepared by mixing solutions of: (a) sodium acetate and acetic acid (b) ammonium chloride and ammonium hydroxide (c) sulphuric acid and sodium sulphate (d) sodium chloride and sodium hydroxide

Solution. Answer (from key): (a). A weak acid with its salt of a strong base (CH3COOH + CH3COONa) gives an acidic buffer.

Teacher's Note: Weak acid plus its salt: acidic buffer.

Exam Note: NH4OH pair is basic buffer.

BS Q3. Hydrolysis constants of two salts KA and KB of weak acids HA and HB are 10−8 and 10−6. If the dissociation constant of third acid HC is 10−2. The order of acidic strengths of three acids will be: (a) HA > HB > HC (b) HB > HA > HC (c) HC > HA > HB (d) HA = HB = HC

Solution. Answer (from key): (c). Ka(HA) = Kw/Kh = 10−14/10−8 = 10−6; Ka(HB) = 10−14/10−6 = 10−8; Ka(HC) = 10−2. Greater Ka means stronger acid: HC > HA > HB.

Teacher's Note: Convert Kh to Ka using Kw, then rank.

Exam Note: Bigger Ka means stronger acid.

BS Q4. Three sparingly soluble salts that have same solubility products are given below: I. A2X II. AX III. AX3. Their solubilities in a saturated solution will be such that: (a) III > II > I (b) III > I > II (c) II > III > I (d) II > I > III

Solution. Answer: (b). S(AX) = √Ksp, S(A2X) = (Ksp/4)1/3, S(AX3) = (Ksp/27)1/4. Corrected: the printed key gives (d) (II > I > III), which holds only if Ksp is not small (Ksp > about 0.06). For sparingly soluble salts (Ksp ≪ 1) the order is III > I > II, option (b). Needs human check.

Teacher's Note: Compare √K, (K/4)1/3, (K/27)1/4 for small K.

Exam Note: Order depends on whether Ksp is small.

BS Q5. Consider the three solutions of 1 M concentration: 1. Sodium acetate (CH3COONa) 2. Acetic acid + Sodium acetate 3. Acetic acid (CH3COOH). The pH of these solutions will lie in the following sequence: (a) 3 < 2 < 1 (b) 2 < 1 < 3 (c) 1 < 2 < 3 (d) 3 < 1 < 2

Solution. Answer (from key): (a). Acetic acid alone: pH < 7; the buffer: pH near pKa (4.74); sodium acetate (salt of weak acid and strong base): pH > 7. So 3 < 2 < 1.

Teacher's Note: Acid, then buffer, then basic salt.

Exam Note: Buffer lies between acid and basic salt.

BS Q6. Glycine NH2CH2COOH behaves: (a) as a Bronsted acid (b) as a Bronsted base (c) both as an acid and a base (d) neither as an acid nor as a base

Solution. Answer (from key): (c). The –COOH group donates a proton and the –NH2 group accepts one, so glycine is amphoteric.

Teacher's Note: Carboxyl donates, amino accepts.

Exam Note: Amino acids are amphoteric.

BS Q7. Solubility of Hg2Cl2 in a solvent is S moles/litre. Its solubility product will be: [Hint: Hg2Cl2 → Hg22+ + 2Cl−] (a) 16S2 (b) 8S2 (c) 16S4 (d) 4S3

Solution. Answer (from key): (d). Ksp = [Hg22+][Cl−]2 = S(2S)2 = 4S3.

Teacher's Note: Mercurous is Hg22+: AB2 type.

Exam Note: Ksp = 4S3.

BS Q8. Arrange the following acids in increasing order of their acid strength: I. HClO4 II. H2SO4 III. H3PO4 (a) III < II < I (b) I < II < III (c) I < III < II (d) III < I < II

Solution. Answer (from key): (a). Strength rises with the oxidation state and electronegativity of the central atom: H3PO4 < H2SO4 < HClO4.

Teacher's Note: Compare central atom electronegativity and oxygen count.

Exam Note: HClO4 is the strongest common acid.

BS Q9. Select the anion which is the strongest Bronsted base: [Hint: HClO4 > HClO3 > HClO2 > HClO (decreasing acidic character); ClO4− < ClO3− < ClO2− < ClO−] (a) ClO4− (b) ClO3− (c) ClO2− (d) ClO−

Solution. Answer (from key): (d). The conjugate base of the weakest acid (HClO) is the strongest base, ClO−.

Teacher's Note: Weakest acid has strongest conjugate base.

Exam Note: Conjugate base of strong acid is weak.

BS Q10. M(OH)x has a Ksp of 4 × 10−9 and its solubility in water is 10−3 M. The value of x is: (a) 4 (b) 1 (c) 3 (d) 2

Solution. Answer (from key): (d). Ksp = S(xS)x = xxSx+1. For x = 2: 4 × (10−3)3 = 4 × 10−9. So x = 2.

Teacher's Note: Test x values in Ksp = xxSx+1.

Exam Note: x = 2 gives 4S3.

BS Q11. What is the maximum possible concentration of Ni2+ ions in a solution containing 0.15 M HCl and 0.10 M H2S? [Given that, Ksp(NiS) = 2 × 10−21 and [S2−]H2S = 4 × 10−21] (a) 0.65 M (b) 0.45 M (c) 0.10 M (d) 0.15 M

Solution. Answer (from key): (b). Maximum [Ni2+] = Ksp/[S2−]. Printed key: (b) 0.45 M. Needs human check: with the printed [S2−] = 4 × 10−21 the quotient is 0.5 M; 0.45 M corresponds to [S2−] ≈ 4.4 × 10−21.

Teacher's Note: Ni2+ stays dissolved while ionic product is below Ksp.

Exam Note: Max [Ni2+] = Ksp/[S2−].

BS Q12. The pH of 10−10 M H2SO4 will be almost: (a) 4 (b) 7 (c) 6 (d) 0

Solution. Answer (from key): (b). The acid is far more dilute than water's own 10−7 M H+, so the pH is almost 7 (just below it).

Teacher's Note: Water's H+ dominates at 10−10 M.

Exam Note: Very dilute acid still gives pH near 7.

BS Q13. Solubility of calcium phosphate (molecular mass, M) in water is W g per 100 mL at 25 °C. Its solubility product at 25 °C will be approximately: (a) 109(W/M)5 (b) 107(W/M)5 (c) 105(W/M)5 (d) 103(W/M)5

Solution. Answer (from key): (b). S = 10W/M mol L−1. Ksp = 108S5 = 108 × (10W/M)5 ≈ 107(W/M)5.

Teacher's Note: W per 100 mL is 10W per litre; Ksp = 108S5.

Exam Note: 108 × 105 ≈ 107.

BS Q14. When some amount of sodium acetate is further added to a mixture of acetic acid and sodium acetate, then pH of the solution: (a) increases (b) decreases (c) remains same (d) none of these can be predicted from given information

Solution. Answer (from key): (a). pH = pKa + log([Salt]/[Acid]); more salt raises the ratio and the pH.

Teacher's Note: More salt raises the log term.

Exam Note: Henderson equation shows direction.

BS Q15. When strong base (NaOH) is added to the weak acid (acetic acid, CH3COOH), then dissociation of acetic acid increases; this effect is known as: (a) common ion effect (b) reverse ion effect (c) saltation effect (d) solubility effect

Solution. Answer (from key): (b). NaOH removes H+, so ionisation of acetic acid increases as neutralisation proceeds; the book calls this the reverse ion effect.

Teacher's Note: Removing H+ pulls the equilibrium forward.

Exam Note: Reverse of common ion effect.

BS Q16. In our body, carbon dioxide (CO2) combines with water (H2O) to form carbonic acid. During physical and mental stress, the rate of respiration increases, which results in the decrease in concentration of CO2 in the blood. What will be the effect on pH of human blood during the stress? (a) Decreases (b) Remains same (c) Increases (d) Cannot be predicted

Solution. Answer (from key): (c). Less CO2 means less H2CO3 and H+, so the pH of blood increases.

Teacher's Note: Lower CO2, lower H+, higher pH.

Exam Note: Le Chatelier on carbonic acid equilibrium.

BS Q17. The correct order of basic strength is: [AIIMS 2007] (a) H2O < OH− < CH3OH < CH3O− (b) CH3OH < H2O < CH3O− < OH− (c) H2O < CH3OH < OH− < CH3O− (d) OH− < H2O < CH3O− < CH3OH

Solution. Answer (from key): (c). Neutral molecules are weaker bases than anions, water < methanol (alkyl group donates electrons), and methoxide is stronger than hydroxide: H2O < CH3OH < OH− < CH3O−.

Teacher's Note: Anions beat neutrals; +I effect strengthens methoxide.

Exam Note: Alkyl group donates electrons.

BS Q18. Which of the following orders is expected to be correct? (a) pKa(ClCH2COOH) > pKa(CH3COOH) > pKa(CH3CH2COOH) (b) pKa(ClCH2COOH) < pKa(CH3COOH) < pKa(CH3CH2COOH) (c) pKa(ClCH2COOH) > pKa(CH3COOH) < pKa(CH3CH2COOH) (d) pKa(ClCH2COOH) < pKa(CH3COOH) > pKa(CH3CH2COOH)

Solution. Answer (from key): (b). Chloroacetic acid is the strongest (pKa 2.86), acetic acid (4.76) next, propanoic acid (4.87) weakest: pKa increases in that order.

Teacher's Note: Electron-withdrawing Cl lowers pKa; alkyl raises it.

Exam Note: Stronger acid has smaller pKa.

BS Q19. The concentration of H3O+ ions in pure water is 10−6 mol dm−3. The corresponding concentration of OH− ions will be: [Hint: In water, [H+] = [OH−] = 10−6 mol dm−3] (a) 10−14 mol dm−3 (b) 10−8 mol dm−3 (c) 10−6 mol dm−3 (d) 10−7 mol dm−3

Solution. Answer (from key): (c). Pure water is neutral, so [OH−] = [H3O+] = 10−6 mol dm−3.

Teacher's Note: Neutral water has equal H+ and OH−.

Exam Note: Do not use 10−7 at other temperatures.

BS Q20. What will be the pH of a solution formed by mixing 40 cm3 of 0.1 M HCl with 10 cm3 of 0.45 M NaOH? (a) 10 (b) 8 (c) 5 (d) 12

Solution. Answer (from key): (d). Moles HCl = 0.004, NaOH = 0.0045, remaining NaOH = 0.0005 mol in 50 mL: [OH−] = 0.01 M, pOH = 2, pH = 12.

Teacher's Note: Subtract moles, divide by total 50 mL.

Exam Note: Excess base sets the pH.

BS Q21. In the following reaction, HCO3− + H2O ⇌ CO32− + H3O+, which two substances are Bronsted bases? (a) CO32− and H3O+ (b) HCO3− and H3O+ (c) HCO3− and CO32− (d) CO32− and H2O

Solution. Answer (from key): (d). In the forward reaction H2O accepts a proton (base); in the reverse reaction CO32− accepts a proton (base).

Teacher's Note: Identify proton acceptors in both directions.

Exam Note: Acceptor equals base.

BS Q22. Which are strong acids? I. HClO3 II. H2SeO3 III. H3PO4 (a) I only (b) III only (c) I and III only (d) II and III only

Solution. Answer (from key): (a). Only HClO3 is a strong acid; H2SeO3 and H3PO4 are weak.

Teacher's Note: Memorise common strong acids.

Exam Note: HClO3 is strong, others are not.

BS Q23. HCOOH ⇌ HCOO− + H+; Ka = 1.7 × 10−4. The ionization of formic acid is represented above. Calculate [H+] of a solution initially containing 0.1 M HCOOH and 0.05 M HCOONa: (a) 8.5 × 10−5 M (b) 3.4 × 10−4 M (c) 4.1 × 10−3 M (d) 1.8 × 10−2 M

Solution. Answer (from key): (b). [H+] = Ka[Acid]/[Salt] = 1.7 × 10−4 × 0.1/0.05 = 3.4 × 10−4 M.

Teacher's Note: Buffer: [H+] = Ka × acid/salt.

Exam Note: Acid:salt ratio is 2:1.

BS Q24. Carbonic acid, H2CO3, is a diprotic acid for which K1 = 4.2 × 10−7 and K2 = 4.7 × 10−11. Which solution will produce a pH closest to 9? (a) 0.1 M H2CO3 (b) 0.1 M Na2CO3 (c) 0.1 M NaHCO3 (d) 0.1 M NaHCO3 and 0.1 M Na2CO3

Solution. Answer (from key): (c). NaHCO3: pH = ½(pK1 + pK2) = ½(6.38 + 10.33) = 8.35 (closest to 9). H2CO3 is about 3.7, Na2CO3 about 11.6, and the carbonate/bicarbonate buffer about 10.3.

Teacher's Note: Amphiprotic salt pH = average of pK1 and pK2.

Exam Note: Compare each solution's pH to 9.

BS Q25. What is the conjugate acid of HPO42−? (a) H3PO4 (b) H2PO4− (c) H3O+ (d) PO43−

Solution. Answer (from key): (b). Adding one H+ to HPO42− gives H2PO4−.

Teacher's Note: Conjugate acid has one more proton.

Exam Note: PO43− is the conjugate base.

BS Q26. What is the Kb of a weak base that produces one OH− per molecule if a 0.05 M solution is 2.5% ionized? [Hint: Kb = Cα2 = 0.05 × (2.5/100)2 = 3.1 × 10−5] (a) 7.8 × 10−8 (b) 1.6 × 10−6 (c) 3.2 × 10−5 (d) 1.2 × 10−3

Solution. Answer (from key): (c). Kb = Cα2 = 0.05 × (0.025)2 = 3.1 × 10−5, closest to 3.2 × 10−5.

Teacher's Note: Use Kb = Cα2 with α = 0.025.

Exam Note: 2.5% means α = 0.025.

BS Q27. The amount of sodium hydrogen carbonate, NaHCO3, in an antacid tablet is to be determined by dissolving the tablet in water and titrating the resulting solution with hydrochloric acid. Which indicator is the most appropriate for this titration? (Ka: H2CO3 2.5 × 10−4; HCO3− 2.4 × 10−8) (a) Methyl orange, pKIn = 3.7 (b) Bromothymol blue, pKIn = 7.0 (c) Phenolphthalein, pKIn = 9.3 (d) Alizarin yellow, pKIn = 12.5

Solution. Answer (from key): (a). The end point is H2CO3, an acidic solution (pH about 4), so methyl orange (pKIn 3.7) matches.

Teacher's Note: Match pKIn to the acidic end point pH.

Exam Note: Weak base with strong acid: acidic end point.

BS Q28. If equal volumes of BaCl2 and NaF solutions are mixed, which of these combinations will not give a precipitate? (Ksp of BaF2 = 1.7 × 10−7) (a) 0.004 M BaCl2 and 0.02 M NaF (b) 0.010 M BaCl2 and 0.015 M NaF (c) 0.015 M BaCl2 and 0.010 M NaF (d) 0.020 M BaCl2 and 0.002 M NaF

Solution. Answer (from key): (d). After mixing, concentrations halve. (d): [Ba2+] = 0.01, [F−] = 0.001: ionic product = 10−8 < 1.7 × 10−7, no precipitate. In (a) the product is 2 × 10−7 > Ksp.

Teacher's Note: Halve each concentration, then compare [Ba2+][F−]2 with Ksp.

Exam Note: Square the fluoride term.

BS Q29. HCN is a weak acid (Ka = 6.2 × 10−10). NH4OH is a weak base (Kb = 1.8 × 10−5). A 1 M solution of NH4CN would be: (a) strongly acidic (b) weakly acidic (c) neutral (d) weakly basic

Solution. Answer (from key): (d). Since Kb > Ka, the cation hydrolyses less than the anion, so the medium is weakly basic.

Teacher's Note: Compare Ka and Kb of the parents.

Exam Note: Larger of Ka, Kb decides the medium.

BS Q30. How many moles of HCOONa must be added to 1 L of 0.1 M HCOOH to prepare a buffer solution with a pH of 3.4? Given: Ka for HCOOH = 2 × 10−4 (a) 0.01 (b) 0.05 (c) 0.1 (d) 0.2

Solution. Answer (from key): (b). pKa = 3.7. pH = pKa + log(s/0.1) = 3.4 gives log(s/0.1) = −0.3, so s = 0.05 mol.

Teacher's Note: Henderson equation solved for the salt amount.

Exam Note: log 2 = 0.3.

BS Q31. Silver ions are added to the solution with: [Br−] = [Cl−] = [CO32−] = [AsO43−] = 0.1 M. Which compound will precipitate at the lowest [Ag+]? (a) AgBr (Ksp = 5 × 10−13) (b) AgCl (Ksp = 1.8 × 10−10) (c) Ag2CO3 (Ksp = 8.1 × 10−12) (d) Ag3AsO4 (Ksp = 10−22)

Solution. Answer (from key): (a). [Ag+] needed: AgBr 5 × 10−12; AgCl 1.8 × 10−9; Ag2CO3 9 × 10−6; Ag3AsO4 10−7. AgBr needs the least.

Teacher's Note: Compute threshold [Ag+] for each salt.

Exam Note: Account for exponents of Ag+.

BS Q32. The equilibrium constant for this reaction is approximately 10−3: HPO42−(aq.) + HCO3−(aq.) ⇌ H2PO4−(aq.) + CO32−(aq.). Which is the strongest conjugate base in this reaction? (a) HPO42−(aq.) (b) HCO3−(aq.) (c) H2PO4−(aq.) (d) CO32−(aq.)

Solution. Answer (from key): (d). K ≪ 1 means the reaction favours reactants, so the stronger base lies on the right: CO32− (conjugate base of the weaker acid HCO3−).

Teacher's Note: Small K: products are the stronger base and acid.

Exam Note: Equilibrium lies toward weaker acid and base.

BS Q33. Which mixture forms a buffer when dissolved in 1 L of water? (a) 0.2 mol NaOH + 0.2 mol HBr (b) 0.2 mol NaCl + 0.3 mol HCl (c) 0.4 mol HNO2 + 0.2 mol NaOH (d) 0.5 mol NH3 + 0.5 mol HCl

Solution. Answer (from key): (c). 0.2 mol NaOH converts half of 0.4 mol HNO2 to NaNO2, leaving 0.2 mol HNO2 and 0.2 mol NO2−: a buffer.

Teacher's Note: Partial neutralisation of a weak acid gives a buffer.

Exam Note: Others are complete neutralisation or strong species.

BS Q34. The equilibrium constant for this reaction is 3.6 × 10−7: OCl−(aq) + H2O(l) ⇌ HOCl(aq) + OH−(aq). What is Ka for HOCl? (a) 2.8 × 10−8 (b) 3.6 × 10−7 (c) 6 × 10−4 (d) 2.8 × 10−6

Solution. Answer (from key): (a). Kb(OCl−) = 3.6 × 10−7, so Ka = Kw/Kb = 10−14/(3.6 × 10−7) = 2.8 × 10−8.

Teacher's Note: Ka × Kb = Kw for a conjugate pair.

Exam Note: Divide Kw by the given constant.

BS Q35. What is the concentration of H+ in a solution that is prepared by mixing 50 mL of 0.5 M HCl and 200 mL of 0.25 M HCl? (a) 0.30 M (b) 0.35 M (c) 0.40 M (d) 0.45 M

Solution. Answer (from key): (a). [H+] = (0.5 × 50 + 0.25 × 200)/250 = 75/250 = 0.30 M.

Teacher's Note: Add the mmol of H+ and divide by total volume.

Exam Note: Total volume is 250 mL.

BS Q36. Ka for hydrofluoric acid is 6.9 × 10−4. What is the equilibrium constant K for the following reaction? F−(aq.) + H2O(l) ⇌ HF(aq.) + OH−(aq.) (a) 6.9 × 10−11 (b) 1.4 × 10−11 (c) 2.6 × 10−9 (d) 8.3 × 10−6

Solution. Answer (from key): (b). K = Kb = Kw/Ka = 10−14/(6.9 × 10−4) = 1.45 × 10−11 ≈ 1.4 × 10−11.

Teacher's Note: K for hydrolysis of anion is Kw/Ka.

Exam Note: Divide Kw by Ka.

BS Q37. A solution of 2 M formic acid (HCOOH) is 0.95% ionized. What is the Ka of formic acid? [Hint: Ka = Cα2 = 2 × (0.95/100)2] (a) 1.9 × 10−2 (b) 1.8 × 10−4 (c) 9 × 10−5 (d) 4.5 × 10−5

Solution. Answer (from key): (b). Ka = Cα2 = 2 × (0.0095)2 = 1.8 × 10−4.

Teacher's Note: Ka = Cα2 with α = 0.0095.

Exam Note: Convert 0.95% to 0.0095.

BS Q38. If 0.1 mol of salt is added to 1 L water, which of these salts is expected to produce the most acidic solution? (a) NaC2H3O2 (b) NH4NO3 (c) CuSO4 (d) AlCl3

Solution. Answer: (d). Hydrolysis of Al3+ (pKa of [Al(H2O)6]3+ about 5) is stronger than Cu2+ (about 7) and NH4+ (9.25); sodium acetate is basic. Corrected: the printed key gives (b) NH4NO3; the most acidic is AlCl3, option (d).

Teacher's Note: Higher charge density cation hydrolyses more.

Exam Note: Al3+ is the most acidic cation here.

BS Q39. A sample of hard water contains 0.005 mole of calcium chloride per litre. What is the minimum concentration of sodium sulphate which must be added for removing the Ca2+ ions from this water sample? Ksp of CaSO4 = 2.4 × 10−5. (a) 4.8 × 10−2 (b) 4.8 × 10−3 (c) 2.4 × 10−2 (d) 2.4 × 10−3

Solution. Answer (from key): (b). [SO42−] = Ksp/[Ca2+] = 2.4 × 10−5/0.005 = 4.8 × 10−3 M.

Teacher's Note: Threshold sulphate = Ksp/[Ca2+].

Exam Note: 0.005 = 5 × 10−3.

BS Q40. Match List-I and List-II: (A) The limits of pH values of buffer solution (i) 5 × 10−12; (B) Concentration of [H3O+] in 0.001 M Ba(OH)2 (ii) Equal; (C) The buffer capacity of a solution is maximum when concentration of salt to that of acid is (iii) 10−14; (D) Ionic product of water is (iv) pKa ± 1. Codes: A, B, C, D. (a) iv, ii, i, iii (b) iv, i, iii, ii (c) i, iv, ii, iii (d) iv, i, ii, iii

Solution. Answer (from key): (d). (A) pKa ± 1 (iv); (B) [OH−] = 2 × 10−3, so [H3O+] = 5 × 10−12 (i); (C) salt equals acid (ii); (D) Kw = 10−14 (iii).

Teacher's Note: Ba(OH)2 gives twice the OH−.

Exam Note: Match each property to its value.

BS Q41. Match List-I and List-II: (A) Degree of ionization of weak electrolytes increases (i) Common ion effect; (B) pH of water decreases on (ii) pH = 4; (C) The solution has hydronium ion concentration of 0.0001 mol/litre (iii) Heating; (D) The addition of NaOH to Ca(OH)2 solution precipitates Ca(OH)2 (iv) On dilution. Codes: A, B, C, D. (a) iv, iii, i, ii (b) iii, iv, ii, i (c) iv, iii, ii, i (d) iv, ii, iii, i

Solution. Answer (from key): (c). (A) α rises on dilution (iv); (B) pH of water falls on heating as Kw rises (iii); (C) [H3O+] = 10−4 means pH = 4 (ii); (D) added OH− is a common ion (i).

Teacher's Note: α rises on dilution; Kw rises on heating.

Exam Note: Match each effect to its cause.

BS Q42. Which of the following is not correct about the percentage ionization of BOH? (a) Kw[H+]/(Kb + Kw) (b) 100 × √(Kb/C) (c) 100/(1 + 10(pKb − pOH)) (d) Kb × 100/(Kb + OH−)

Solution. Answer: (a). BOH ⇌ B+ + OH−: Kb = Cα2/(1 − α), so α = √(Kb/C) and % = 100√(Kb/C) (b). Also α = Kb/(Kb + [OH−]), giving (d) and, dividing, (c) 100/(1 + 10(pKb − pOH)). Expression (a) has no factor 100 and the wrong form, so (a) is the incorrect one. Corrected: the printed key gives (c); (c) is correct and the incorrect expression is (a).

Teacher's Note: Derive α from Kb and [OH−]; test each option.

Exam Note: Option (a) lacks the factor 100.

BS Q43. When NaCl is added gradually to the saturated solution of AgCl then which of the following plots of [Ag+] against [Cl−] is correct? (a) horizontal straight line (b) a falling hyperbola-type curve (c) straight line rising with [Cl−] (d) straight line falling with [Cl−)

Solution. Answer (from key): (b). [Ag+] = Ksp/[Cl−], a rectangular hyperbola: [Ag+] falls steeply and then flattens as [Cl−] increases.

Teacher's Note: Inverse relation gives a hyperbola.

Exam Note: [Ag+][Cl−] = Ksp constant.

Brain Storming Problems: One or More Than One Correct Options

BS Multi Q1. Which of the following statements is/are correct about the ionic product of water? (a) K (equilibrium constant of water) < Kw (ionic product of water) (b) pK > pKw (c) At 300 K, Kw of water becomes 10−12 (d) Ionic product of water at 25 °C is 10−14

Solution. Answer (from key): (a), (b), (c), (d). K = Kw/[H2O] = Kw/55.5, so K < Kw and pK > pKw; Kw = 10−14 at 25 °C. Needs human check: option (c) as read from the scan states 10−12 at 300 K, whereas Kw at 300 K is about 1.1 × 10−14; the key accepts all four.

Teacher's Note: Kw = K × 55.5.

Exam Note: Check each statement against Kw values.

BS Multi Q2. Which among the following statements is/are correct? (a) pH = −log10(H3O+) (b) pH decreases with increase of temperature (c) pH cannot be zero, negative or more than 14 (d) If a solution is diluted ten times, its pH increases by 1

Solution. Answer (from key): (a), (b), (d). pH is defined as −log[H3O+]; Kw rises with temperature so pH of water falls; pH can be zero, negative or above 14 for concentrated solutions, so (c) is false; ten-fold dilution of a strong acid raises pH by 1.

Teacher's Note: pH can be outside 0 to 14.

Exam Note: Dilution tenfold: one pH unit.

BS Multi Q3. Which among the following statements is/are correct? (a) pH of 10−8 M HCl is equal to 8 (b) Conjugate base of H2PO4− is HPO42− (c) pH of 0.1 M NaCl (aqueous solution) = ½ pKw (d) Ionization of water decreases with decrease in temperature

Solution. Answer (from key): (b), (c). (a) is false (pH about 6.98); (b) is true; (c) is true for a neutral salt. Needs human check: as read from the scan, (d) also seems true (ionisation of water falls on cooling), yet the key lists only (b) and (c); the printed wording may be 'increases'.

Teacher's Note: Neutral salt solution: pH = ½ pKw.

Exam Note: Remove H+ for the conjugate base.

BS Multi Q4. Let us consider the ionization of HCl in the aqueous solution of CH3COOH. CH3COOH + HCl ⇌ CH3COOH2+ + Cl−. Select the correct statement(s) among the following: (a) Cl− is the conjugate base of HCl (b) CH3COOH is the conjugate acid of CH3COOH2+ (c) CH3COOH2+ is the conjugate acid of CH3COOH (d) Cl− is the conjugate base of CH3COOH

Solution. Answer (from key): (a), (b). Cl− is the conjugate base of HCl, and CH3COOH2+ and CH3COOH form a conjugate pair. Needs human check: as I read the options, statement (b) reverses the pair (CH3COOH is the conjugate base of CH3COOH2+) and (c) is the true form; the key's (a), (b) probably reflects different printed wording.

Teacher's Note: Conjugate pairs differ by one proton.

Exam Note: Read acid/base direction carefully.

BS Multi Q5. Which among the following species act both as an acid as well as a base? (a) SO42− (b) HSO4− (c) PO43− (d) NH3

Solution. Answer (from key): (b), (d). HSO4− can donate or accept a proton, and NH3 can accept a proton (base) or donate one (to give NH2−) in the book's view; SO42− and PO43− can only accept.

Teacher's Note: Amphiprotic species can both donate and accept H+.

Exam Note: Fully deprotonated anions are only bases.

BS Multi Q6. Which among the following salts will give basic solution on hydrolysis? [PET (MP) 2008] (a) NaH2PO4 (b) NH4Cl (c) NaCl (d) K2CO3

Solution. Answer (from key): (a), (d). K2CO3 (salt of weak acid and strong base) is basic. Needs human check: NaH2PO4 as printed is normally weakly acidic (pH about 4.7) so (a) is doubtful; the key marks (a) and (d).

Teacher's Note: Weak acid plus strong base salt is basic.

Exam Note: Check dihydrogen phosphate separately.

BS Multi Q7. Which among the following represent the conjugate acid/base pairs? (a) H3O+/H2O (b) H2SO4/SO42− (c) HCO3−/CO32− (d) All are conjugate acid/base pairs

Solution. Answer (from key): (a), (c). Pairs differ by exactly one proton: H3O+/H2O and HCO3−/CO32−. H2SO4/SO42− differ by two protons.

Teacher's Note: One proton difference only.

Exam Note: Check the proton count.

BS Multi Q8. If you have saturated solution of CaF2 then: (a) [Ca2+] = √Ksp (b) [Ca2+] = 2[F−] (c) 2[Ca2+] = [F−] (d) [Ca2+] = [Ksp/4]1/3

Solution. Answer (from key): (c), (d). CaF2 ⇌ Ca2+ + 2F−: [F−] = 2[Ca2+] and Ksp = 4S3, so [Ca2+] = (Ksp/4)1/3.

Teacher's Note: Stoichiometry: F− is twice Ca2+.

Exam Note: Ksp = 4S3.

BS Multi Q9. The relative strength of two weak bases at same concentration may be given as: (a) Kb1/Kb2 (b) [OH−]1/[OH−]2 (c) α1/α2 (d) √Kb1/√Kb2

Solution. Answer (from key): (b), (c), (d). At equal concentration [OH−] = Cα = √(KbC), so the strength ratio is [OH−]1/[OH−]2 = α1/α2 = √Kb1/√Kb2.

Teacher's Note: Strength ratio uses √Kb, not Kb.

Exam Note: Same C: α, [OH−], √Kb scale together.

Brain Storming Problems: Integer Answer Type Questions

BS Integer Q1. What will be the pH of 0.1 M CH3COONH4? Dissociation constants of CH3COOH and NH4OH are Ka = 1.8 × 10−5 and Kb = 1.8 × 10−5 respectively.

Solution. Answer (from key): 7. Ka = Kb, so pH = 7 + ½(pKa − pKb) = 7.

Teacher's Note: Equal Ka and Kb give a neutral salt.

Exam Note: Concentration does not matter.

BS Integer Q2. Ionic product of water is 1 × 10−12. pH of water will be:

Solution. Answer (from key): 6. [H+] = √Kw = 10−6, so pH = 6.

Teacher's Note: Neutral pH is half of pKw.

Exam Note: pH = ½ pKw.

BS Integer Q3. Calculate the pH at which an acid indicator HIn with concentration 0.1 M changes its colour. (Ka for HIn = 1 × 10−5)

Solution. Answer (from key): 5. The colour changes when [HIn] = [In−], so pH = pKa = 5.

Teacher's Note: Colour change when acid and base forms are equal.

Exam Note: pH = pKIn at the mid-point.

BS Integer Q4. Sum of basicity of H3PO4, H3PO3, H3PO2 is equal to:

Solution. Answer (from key): 6. Basicities are 3, 2 and 1 (number of P–OH groups), giving 6.

Teacher's Note: Count P–OH groups in each.

Exam Note: Hydrogens on P are not acidic.

BS Integer Q5. A given weak acid (0.01 M) has pKa = 6. The pH of this solution is:

Solution. Answer (from key): 4. [H+] = √(KaC) = √(10−6 × 10−2) = 10−4, so pH = 4.

Teacher's Note: Weak acid: [H+] = √(KaC).

Exam Note: pH = ½(pKa − log C).

BS Integer Q6. Solubility product of an electrolyte is 6912S7. How many ions will be obtained by the ionization of one molecule of electrolyte?

Solution. Answer (from key): 7. Ksp = xx yy Sx+y; the power of S is x + y = 7, the number of ions (for example A2B5: 22 × 55 = 12500, A3B4: 33 × 44 = 6912).

Teacher's Note: Power of S equals total ions per formula unit.

Exam Note: 33 × 44 = 6912 gives A3B4.

BS Integer Q7. The solubility product of Mg(OH)2 is 5 × 10−19 at 25 °C. pH of saturated solution of Mg(OH)2 will be:

Solution. Answer (from key): 8. 4S3 = 5 × 10−19, S = 5 × 10−7 M, [OH−] = 2S = 10−6 M, pOH = 6 and pH = 8.

Teacher's Note: Find S from 4S3, then [OH−] = 2S.

Exam Note: Check: 4 × (5 × 10−7)3 = 5 × 10−19.

BS Integer Q8. pH of 10−x M HCl is 6.9586. The value of x will be:

Solution. Answer (from key): 8. 10−8 M HCl: [H+] = 10−8 + 10−7 ≈ 1.1 × 10−7 M, pH = 6.9586, so x = 8.

Teacher's Note: Include water's 10−7 M H+.

Exam Note: −log(1.1 × 10−7) = 6.9586.

BS Integer Q9. If the equilibrium constant of the reaction of weak acid HA with strong base is 109, then the pH of 0.1 M NaA solution will be:

Solution. Answer (from key): 9. K = Ka/Kw = 109, so Ka = 10−5. pH = 7 + ½(pKa + log C) = 7 + ½(5 − 1) = 9.

Teacher's Note: Get Ka, then salt pH formula.

Exam Note: Same as Question 220.

BS Integer Q10. Consider the titration of 50 mL of 0.1 M HBr with 0.1 M KOH. Calculate pH after 49 mL of the base has been added to the 50 mL of HBr.

Solution. Answer (from key): 3. Excess H+ = (5.0 − 4.9) mmol = 0.1 mmol in 99 mL: [H+] ≈ 1.0 × 10−3 M, so pH = 3.

Teacher's Note: Subtract mmol of base, divide by total volume 99 mL.

Exam Note: Strong acid and strong base titration.

BS Integer Q11. The dissociation constant of a substituted benzoic acid at 25 °C is 1 × 10−4. The pH of a 0.01 M solution of its sodium salt is: [IIT 2009]

Solution. Answer (from key): 8. pH = ½[pKw + pKa + log C] = ½[14 + 4 − 2] = 8.

Teacher's Note: Salt of weak acid and strong base: use ½[pKw + pKa + log C].

Exam Note: log 0.01 = −2.

BS Integer Q12. The total number of diprotic acids among the following is: H3PO4, H2SO4, H3PO3, H2CO3, H2S2O7, H3BO3, H3PO2, H2CrO4, H2SO3 [IIT 2010]

Solution. Answer (from key): 6. H2SO4, H3PO3, H2CO3, H2S2O7, H2CrO4 and H2SO3 are diprotic: six acids.

Teacher's Note: Count acids with two ionisable O–H groups.

Exam Note: H3BO3 and H3PO2 are monobasic.

BS Integer Q13. Amongst the following, the total number of compounds whose aqueous solution turns red litmus paper blue is: KCN, K2SO4, (NH4)2C2O4, NaCl, Zn(NO3)2, FeCl3, K2CO3, NH4NO3, LiCN [IIT 2010]

Solution. Answer (from key): 3. Salts of weak acid and strong base are basic and turn red litmus blue: KCN, K2CO3 and LiCN, so 3.

Teacher's Note: Basic salts come from weak acid and strong base.

Exam Note: Count only weak-acid, strong-base salts.

Linked Comprehension Type Questions

Passage 1 Q1. Passage 1: buffer capacity is maximum when [Salt] = [Acid] (acid buffer) or [Salt] = [Base] (base buffer); a buffer works for pH = pKa ± 1 (or pOH = pKb ± 1) and is efficient when pH = pKa or pOH = pKb. Any buffer can be used as a buffer up to: (a) 10 pH units (b) 5 pH units (c) 2 pH units (d) 1 pH unit

Solution. Answer (from key): (c). The useful range is pKa ± 1, a span of 2 pH units.

Teacher's Note: Range is pKa − 1 to pKa + 1.

Exam Note: Span is 2 units.

Passage 1 Q2. Which among the following solutions will be the most efficient buffer? (a) 0.1 M CH3COONa + 0.01 M CH3COOH (b) 0.1 M NH4Cl + 0.1 M NH4OH (c) 0.001 M HCOOH + 0.002 M HCOONa (d) All of the above

Solution. Answer (from key): (b). Efficiency is greatest when salt and weak component are equal in concentration and large; (b) has 1 : 1 at 0.1 M each.

Teacher's Note: Equal and large concentrations give the best buffer.

Exam Note: Ratio 1 : 1 maximises capacity.

Passage 1 Q3. The buffer capacity is equal to: (a) Δn/ΔpH (b) pH/Δn (c) ± 1pKa (d) none of these

Solution. Answer (from key): (a). Buffer capacity = moles of acid or base added per litre ÷ change in pH = Δn/ΔpH.

Teacher's Note: Capacity measures moles added per unit pH change.

Exam Note: Definition: Δn/ΔpH.

Passage 1 Q4. A buffer of acetic acid (pKa ≈ 4.8) with sodium acetate, when CH3COOH and CH3COONa are present in equivalent amounts has pH limits equal to: (a) 0 to 4.8 (b) 3.8 to 5.8 (c) 4.3 to 5.3 (d) 4.8

Solution. Answer (from key): (b). pH range = pKa ± 1 = 3.8 to 5.8.

Teacher's Note: pKa ± 1.

Exam Note: Range, not a single value.

Passage 1 Q5. Buffer capacity is maximum when: (a) one mole of NH4Cl is added to two moles of NH4OH (b) one mole of NH4Cl is added to one mole of NH4OH (c) one mole of NH4Cl is added to one mole of NaOH (d) one mole of NaCl is added to one mole of NaOH

Solution. Answer (from key): (b). Equal moles of salt and weak base give [Salt] = [Base], maximum capacity.

Teacher's Note: Equal salt and base gives the maximum.

Exam Note: NaOH is a strong base, not a buffer partner.

Passage 1 Q6. A buffer solution is prepared by mixing equal concentration of acid (ionisation constant Ka) and a salt. The pH of buffer is: [JEE (Orissa) 2008] (a) pKa + 7 (b) 14 − pKa (c) pKa (d) pKa + 1

Solution. Answer (from key): (c). Equal concentrations make log([Salt]/[Acid]) = 0, so pH = pKa.

Teacher's Note: Henderson with ratio 1.

Exam Note: log 1 = 0.

Passage 2 Q1. Passage 2: hydrolysis. pH = ½[pKw + pKa + log C] (weak acid, strong base salt); pH = ½[pKw − pKb − log C] (weak base, strong acid salt); pH = ½[pKw + pKa − pKb] (weak acid, weak base salt). Data: pKa = 4.7447, pKb = 4.7447, pKw = 14. When 50 mL of 0.1 M NH4OH is added to 50 mL of 0.05 M HCl solution, the pH is: (a) 1.6021 (b) 12.3979 (c) 4.7447 (d) 9.2553

Solution. Answer (from key): (d). NH4OH = 5 mmol, HCl = 2.5 mmol; leaving 2.5 mmol base and 2.5 mmol NH4Cl, a basic buffer: pOH = pKb = 4.7447, pH = 9.2553.

Teacher's Note: Half-neutralised weak base: pOH = pKb.

Exam Note: pH = 14 − 4.7447.

Passage 2 Q2. 0.001 M NH4Cl aqueous solution has pH: (a) 6.127 (b) 7.126 (c) 2.167 (d) 1.267

Solution. Answer (from key): (a). pH = ½[pKw − pKb − log C] = ½[14 − 4.7447 + 3] = 6.127.

Teacher's Note: Salt of weak base and strong acid formula.

Exam Note: −log 0.001 = 3.

Passage 2 Q3. 50 mL 0.1 M NaOH is added to 50 mL of 0.1 M CH3COOH solution, the pH will be: (a) 4.7447 (b) 9.2553 (c) 8.7218 (d) 1.6021

Solution. Answer (from key): (c). Salt CH3COONa at 0.05 M: pH = ½[14 + 4.7447 + log 0.05] = ½[14 + 4.7447 − 1.3010] = 8.7218.

Teacher's Note: Complete neutralisation: dilute to 0.05 M, use the hydrolysis formula.

Exam Note: Concentration halves on mixing.

Passage 2 Q4. 1 mole CH3COOH and 1 mole CH3COONa are dissolved in water to form 1 litre aqueous solution. The pH of the resulting solution will be: (a) 9.2553 (b) 4.7447 (c) 14 (d) 7

Solution. Answer (from key): (b). Equal acid and salt, so pH = pKa = 4.7447.

Teacher's Note: Buffer with equal components.

Exam Note: pH = pKa.

Passage 2 Q5. When 50 mL of 0.1 M NaOH is added to 50 mL of 0.05 M CH3COOH solution, the pH of the solution is: (a) 1.6021 (b) 12.3979 (c) 4.7447 (d) 8.7218

Solution. Answer (from key): (b). NaOH = 5 mmol, CH3COOH = 2.5 mmol; excess OH− = 2.5 mmol in 100 mL = 0.025 M, pOH = 1.6021, pH = 12.3979.

Teacher's Note: Excess strong base fixes the pH.

Exam Note: Total volume is 100 mL.

Passage 3 Q1. Passage 3: a titration curve plots pH against volume of titrant; pH changes most rapidly near the equivalence point. The following figure represents titration curve of HCl against NaOH (pH rises slowly, then sharply at the equivalence point, then levels off). The pH at equivalence point will be: (a) 7 (b) 6 (c) 8 (d) 3

Solution. Answer (from key): (a). Strong acid with strong base gives a neutral salt, so the equivalence point is at pH 7.

Teacher's Note: Strong-strong titration: pH 7.

Exam Note: Neutral salt of NaCl.

Passage 3 Q2. Examine the titration curve: pH falls from 13 to about 1 as acid volume goes from 0 to 80 mL, with the sharp drop at about 40 mL. Which of the following titrations could it represent? (a) HCl by KOH (b) RbOH by HBr (c) HCl by NaOH (d) NH3 by HNO3

Solution. Answer (from key): (b). The pH starts high and falls, so the base is in the flask and acid is added: RbOH (strong base) by HBr (strong acid). The other options either add base to acid or involve a weak base.

Teacher's Note: Falling pH means acid is the titrant.

Exam Note: Starts at pH 13: a strong base in the flask.

Passage 3 Q3. The suitable indicator for this titration will be: (a) bromothymol blue (b) methyl orange (c) methyl red (d) all of these

Solution. Answer (from key): (d). The vertical jump spans roughly pH 3 to 11, so bromothymol blue, methyl orange and methyl red all change colour within it.

Teacher's Note: Strong-strong steep jump suits many indicators.

Exam Note: Check indicator range lies inside the jump.

Passage 3 Q4. The pH at equivalence point is: (a) 11 (b) 7 (c) 3 (d) 2

Solution. Answer (from key): (b). Strong acid with strong base: neutral salt, pH 7.

Teacher's Note: Neutral salt gives pH 7.

Exam Note: Read it off the vertical segment.

Passage 3 Q5. Which of the following curves indicates the titration of a weak diprotic acid by NaOH of equivalent strength? (four curves are drawn: (a) pH rises with a half-equivalence plateau at pK1, an inflection at (pK1 + pK2)/2 at the first equivalence and a plateau at pK2; (b)–(d) show other shapes)

Solution. Answer (from key): (a). A weak diprotic acid shows two buffer regions at pK1 and pK2 with the first equivalence point at pH = (pK1 + pK2)/2; curve (a) shows exactly these. Figure not redrawn; described in words.

Teacher's Note: Two buffer plateaus and two jumps.

Exam Note: First equivalence pH is the mean of pK1, pK2.

Passage 4 Q1. Passage 4: acid rain. SO2 + H2O ⇌ HSO3− + H+, Ka1 = 10−2 M; HSO3− ⇌ SO32− + H+, Ka2 = 10−7 M; SO2(aq.) + H2O ⇌ SO32− + 2H+, Ka = Ka1 × Ka2 = 10−9 at 300 K. Which of the following reagents will give white precipitate with the aqueous solution of sulphurous acid? (a) NaCl (b) KCl (c) BaCl2 (d) HCl

Solution. Answer (from key): (c). SO32− from sulphurous acid forms insoluble white BaSO3 with BaCl2.

Teacher's Note: Ba2+ precipitates sulphite.

Exam Note: Sodium and potassium sulphites are soluble.

Passage 4 Q2. The pH of 0.01 M aqueous solution of sodium sulphite will be: (a) 8.5 (b) 9 (c) 4.5 (d) 9.5

Solution. Answer (from key): (d). Kh = Kw/Ka2 = 10−14/10−7 = 10−7; [OH−] = √(10−7 × 0.01) = 3.2 × 10−5, pOH = 4.5, pH = 9.5.

Teacher's Note: Hydrolysis of SO32− with Ka2.

Exam Note: pH = ½[14 + 7 − 2] = 9.5.

Passage 4 Q3. The dominant equilibrium in an aqueous solution of sodium hydrogen sulphite is: 2HSO3− ⇌ SO2 + SO32− + H2O. The equilibrium constant for the above reaction is: (a) 10−6 (b) 10−9 (c) 10−5 (d) 10−3

Solution. Answer (from key): (c). The reaction is the reverse of the first ionisation plus the second: K = Ka2/Ka1 = 10−7/10−2 = 10−5.

Teacher's Note: Combine the two ionisations: K = Ka2/Ka1.

Exam Note: Reverse the first step.

Passage 4 Q4. Which among the following statements is correct? (a) CO2 gas develops more acidity in rain-water than SO2 (b) H2SO3 is less acidic than H2SO4 (c) HNO3 is less acidic than HNO2 (d) SO2(g) is reduced in the atmosphere during thunderstorm

Solution. Answer (from key): (b). H2SO4 is a strong acid while H2SO3 is weak; SO2 is more acid-forming than CO2, HNO3 is stronger than HNO2, and SO2 is oxidised, not reduced.

Teacher's Note: Compare acid strengths of oxyacids.

Exam Note: Oxidation, not reduction, forms acid rain.

Passage 5 Q1. Passage 5: ionic product versus Ksp: if Kip = Ksp the solution is just saturated; if Kip < Ksp unsaturated; if Kip > Ksp precipitation occurs. The solubility product, Ksp, of sparingly soluble salt MX at 25 °C is 2.5 × 10−9. The solubility of the salt in mol L−1 at this temperature is: (a) 1 × 10−14 (b) 5 × 10−8 (c) 1.25 × 10−9 (d) 5 × 10−5

Solution. Answer (from key): (d). S = √Ksp = √(2.5 × 10−9) = 5 × 10−5 mol L−1.

Teacher's Note: AB type: square root of Ksp.

Exam Note: √25 × 10−10 = 5 × 10−5.

Passage 5 Q2. Which of the following is most soluble? (a) Bi2S3 (Ksp = 1 × 10−70) (b) MnS (Ksp = 7 × 10−16) (c) CuS (Ksp = 8 × 10−37) (d) Ag2S (Ksp = 6 × 10−51)

Solution. Answer (from key): (b). S: Bi2S3 = (10−70/108)1/5 ≈ 4 × 10−15; MnS = √(7 × 10−16) = 2.6 × 10−8; CuS ≈ 9 × 10−19; Ag2S = (6 × 10−51/4)1/3 ≈ 1.1 × 10−17. MnS is largest.

Teacher's Note: Compute S using each salt's type.

Exam Note: Largest S, not largest exponent.

Passage 5 Q3. The concentration of Ag+ ions in a given saturated solution of AgCl at 25 °C is 1.06 × 10−5 g ion per litre. The solubility product of AgCl is: (a) 0.353 × 10−10 (b) 0.530 × 10−10 (c) 1.12 × 10−10 (d) 2.12 × 10−10

Solution. Answer (from key): (c). [Cl−] = [Ag+], so Ksp = (1.06 × 10−5)2 = 1.12 × 10−10.

Teacher's Note: Ksp = [Ag+][Cl−] with equal ions.

Exam Note: Square 1.06 × 10−5.

Passage 5 Q4. When equal volumes of the following solutions are mixed, precipitation of AgCl (Ksp = 1.8 × 10−10) will occur only with: (a) 10−4 M Ag+ + 10−4 M Cl− (b) 10−5 M Ag+ + 10−5 M Cl− (c) 10−6 M Ag+ + 10−6 M Cl− (d) 10−10 M Ag+ + 10−10 M Cl−

Solution. Answer (from key): (a). After mixing, [Ag+][Cl−] = (5 × 10−5)2 = 2.5 × 10−9 > 1.8 × 10−10 only for (a).

Teacher's Note: Halve concentrations, then compare with Ksp.

Exam Note: Same as Question 20.

Passage 5 Q5. When HCl gas is passed through saturated NaCl solution, the ionic product of NaCl is exceeded because of: (a) increase in Cl− ion concentration (b) increase in Na+ ion concentration (c) decrease in the NaCl concentration (d) decrease in Cl− ion concentration

Solution. Answer (from key): (a). HCl adds Cl−, so [Na+][Cl−] exceeds Ksp.

Teacher's Note: Common ion Cl− raises the ionic product.

Exam Note: Only Cl− is increased.

Passage 5 Q6. If the solubility of Li3Na3(AlF6)2 is x mol L−1, then its solubility product is equal to: (a) 12x3 (b) 18x3 (c) x8 (d) 2916x8

Solution. Answer (from key): (d). Ksp = (3x)3(3x)3(2x)2 = 2916x8 (same as Question 140).

Teacher's Note: Product of each ion's concentration to its coefficient.

Exam Note: 27 × 27 × 4 = 2916.

Passage 6 Q1. Passage 6: Kw = Ka × Kb for a conjugate pair; phosphoric acid (pKa1 = 2.12, pKa2 = 7.21, pKa3 = 12.32) is used in fertilisers, soft drinks (0.05% by weight, density 1 g mL−1) and toothpaste; PO43− is an interfering radical in qualitative analysis. The basicity of phosphoric acid is: (a) 1 (b) 2 (c) 3 (d) 4

Solution. Answer (from key): (c). H3PO4 has three ionisable –OH groups on P, so it is tribasic.

Teacher's Note: Count P–OH groups.

Exam Note: Three P–OH, one P=O.

Passage 6 Q2. The state of hybridization of phosphorus in phosphoric acid is: (a) sp (b) sp2 (c) sp3 (d) sp3d

Solution. Answer (from key): (c). P has four σ bonds (three P–OH and one P=O) and no lone pair, so it is sp3.

Teacher's Note: Four σ bonds, no lone pair: sp3.

Exam Note: P=O counts as one σ bond.

Passage 6 Q3. The removal of PO43− in qualitative analysis of basic radicals is made by using a buffer solution of: (a) HCO3− and CO32− (b) CH3COO− and CH3COOH (c) NH4+ and NH4OH (d) none of these

Solution. Answer (from key): (b). The acetate buffer (pH about 5) precipitates phosphates of Fe3+ and Al3+ as FePO4 and AlPO4, removing PO43− before group IV.

Teacher's Note: Acetate buffer keeps pH about 5 for phosphate removal.

Exam Note: Key chooses acetic acid/acetate.

Passage 6 Q4. What is the molarity of phosphoric acid used in soft drinks? (a) 5.1 × 10−3 (b) 1.5 × 10−3 (c) 3.1 × 10−3 (d) 2.1 × 10−3

Solution. Answer (from key): (a). 0.05% by weight at density 1 g mL−1 is 0.5 g per litre; 0.5/98 = 5.1 × 10−3 M.

Teacher's Note: Convert 0.05% w/v to g/L, then divide by M = 98.

Exam Note: Molar mass of H3PO4 is 98.

Passage 6 Q5. Which among the following relations is correct? (a) Ka1 < Ka2 < Ka3 (b) Ka1 > Ka2 > Ka3 (c) Ka1 = Ka2 = Ka3 (d) Ka1 > Ka3 > Ka2

Solution. Answer (from key): (b). Successive ionisations get harder, so Ka1 > Ka2 > Ka3.

Teacher's Note: Each later proton leaves a more negative ion.

Exam Note: Successive Ka values fall.

Passage 6 Q6. First ionization of phosphoric acid is: H3PO4 ⇌ H2PO4− + H+, pKa1 = 2.21. The dissociation constant of conjugate base of H3PO4 will be: (a) 6.45 × 10−9 (b) 1.62 × 10−12 (c) 3.48 × 10−11 (d) 4.62 × 10−2

Solution. Answer (from key): (b). Ka1 = antilog(−2.21) = 6.165 × 10−3; Kb of the conjugate base = Kw/Ka1 = 10−14/(6.165 × 10−3) = 1.62 × 10−12.

Teacher's Note: Kb of conjugate base = Kw/Ka.

Exam Note: Use pKa1 = 2.21 as stated in the question.

Self Assessment Assignment No. 10

Self-Assessment Q1. When 50 mL of 0.1 M NaOH is mixed with 50 mL of 0.05 M CH3COOH solution, pH becomes: (a) 1.602 (b) 12.39 (c) 4.74 (d) 8.72

Solution. Answer (from key): (b). NaOH = 5 mmol, acid = 2.5 mmol; excess OH− = 2.5 mmol in 100 mL = 0.025 M, pOH = 1.602, pH = 12.39.

Teacher's Note: Neutralise first, then excess base sets pH.

Exam Note: Acid is fully consumed.

Self-Assessment Q2. If the degree of dissociation of water at 90 °C is 1.28 × 10−8 then the ionisation constant of water at 90 °C is: (a) 7.52 × 10−12 M (b) 9.07 × 10−15 M (c) 1.28 × 10−14 M (d) 1.38 × 10−14 M

Solution. Answer: (b). Ionisation constant K = Cα2 with C = 1000/18 = 55.5 M: K = 55.5 × (1.28 × 10−8)2 = 9.07 × 10−15 M. Corrected: the printed key gives (a); the working gives option (b).

Teacher's Note: K = Cα2 using water's molarity 55.5 M.

Exam Note: K differs from Kw by factor 55.5.

Self-Assessment Q3. How much water from 5 litre of 10−3 M HCl should be evaporated to change its pH by 2 units? (a) 1.5 litre (b) 0.5 litre (c) 2.54 litre (d) 4.95 litre

Solution. Answer: (d). pH must change from 3 to 1, so [H+] = 0.1 M. Moles = 5 × 10−3; final volume = 5 × 10−3/0.1 = 0.05 L, so 5 − 0.05 = 4.95 L must evaporate. Corrected: the printed key gives (a) 1.5 L, which does not satisfy the condition; the correct option is (d).

Teacher's Note: Moles stay constant; final volume = moles/0.1 M.

Exam Note: Evaporation lowers pH.

Self-Assessment Q4. Which among the following cannot exist in aqueous solution? (a) NH4+ (b) NO3− (c) NO2− (d) NH2−

Solution. Answer (from key): (d). NH2− is an extremely strong base and reacts completely with water: NH2− + H2O → NH3 + OH−.

Teacher's Note: Very strong bases are levelled by water.

Exam Note: Conjugate base of a very weak acid cannot persist.

Self-Assessment Q5. The pH of an HCl solution is 2. Sufficient water is added to make the pH of new solutions (value printed illegibly). The hydrogen ion concentration is reduced: (a) ten fold (b) seven fold (c) thousand fold (d) hundred fold

Solution. Answer (from key): (c). [H+] ratio = 10ΔpH; the printed key (c) thousand fold corresponds to a new pH of 5. Needs human check: the target pH is missing in the scan.

Teacher's Note: Reduction factor is 10 to the change in pH.

Exam Note: Three pH units mean 1000-fold.

Self-Assessment Q6. Consider the following statements: I. HNO3 (strong acid) behaves as a base in HF. II. H2SO4 dissociates to a small extent in glacial acetic acid. III. CH3COOH (a weak acid) behaves as strong acid in NH3(l). Select the correct alternate for these statements: (a) I, II, and III (b) I and III (c) II and III (d) I and II

Solution. Answer (from key): (a). All three are correct: in HF (a poorer proton donor) HNO3 accepts a proton; in acetic acid (low basicity) H2SO4 ionises little; in strongly basic liquid NH3 even acetic acid is fully ionised.

Teacher's Note: Solvent basicity levels acid strength.

Exam Note: Strong acid can act as base in HF.

Self-Assessment Q7. The solubility of A2X5 is x mol dm−3. Its solubility product is: (a) 36x6 (b) 64 × 104 x7 (c) 126x7 (d) 1.25 × 104 x7

Solution. Answer (from key): (d). Ksp = (2x)2(5x)5 = 4 × 3125 x7 = 12500x7 = 1.25 × 104 x7.

Teacher's Note: Raise 2x to 2 and 5x to 5.

Exam Note: 4 × 3125 = 12500.

Self-Assessment Q8. During the titration of mixture of NaOH, Na2CO3 and an inert substance against hydrochloric acid: (a) phenolphthalein is used to detect the end point when NaOH is completely neutralised and half of Na2CO3 is neutralised (b) methyl orange is used to detect the final end point (c) methyl orange is used to detect the first end point (d) phenolphthalein is used to detect the final end point

Solution. Answer (from key): (a), (b). Phenolphthalein turns colourless when NaOH is neutralised and Na2CO3 reaches NaHCO3; methyl orange marks the final end point (H2CO3).

Teacher's Note: Two indicators: phenolphthalein first, methyl orange last.

Exam Note: Carbonate neutralises in two steps.

Self-Assessment Q9. Solubility product of the hydroxide M(OH)2 is 4 × 10−12. Select the correct statement(s): (a) the pH of its saturated solution will be 10.3 (b) its solubility will decrease in a buffer medium of pH 9 (c) its solubility will increase in a buffer medium of pH (value not legible in scan) (d) its solubility is unaffected by pH of the medium

Solution. Answer (from key): (a), (b), (c). S = (Ksp/4)1/3 = 10−4 M, [OH−] = 2 × 10−4 M, pOH = 3.7, pH = 10.3 (a). Solubility depends on [OH−] (d false). Needs human check: a buffer at pH 9 has [OH−] = 10−5 M, lower than the saturated solution, which would increase solubility, so statement (b) as read looks doubtful; the key's (a), (b), (c) was followed.

Teacher's Note: Solubility of a hydroxide rises as pH falls.

Exam Note: S depends on [OH−] through Ksp.

Self-Assessment Q10. Which of the following salt solutions will be basic? (a) NaCl (b) NaCN (c) K2CO3 (d) NH4NO3

Solution. Answer (from key): (b), (c). NaCN and K2CO3 are salts of weak acids and strong bases, so their anions hydrolyse to give OH−.

Teacher's Note: Weak acid, strong base salts are basic.

Exam Note: Spot the weak-acid anions.

Self-Assessment Q11. Which of the following salts will not undergo hydrolysis? (a) NaCl (b) KCl (c) NH4Cl (d) CH3COONa

Solution. Answer (from key): (a), (b). NaCl and KCl are salts of strong acid and strong base, so neither ion hydrolyses.

Teacher's Note: Strong acid plus strong base: no hydrolysis.

Exam Note: Check each ion's parent.

Self-Assessment Q12. Which of the following mixtures will be buffer? (a) CH3COOH + CH3COONH4 (b) HCl + NaCl (c) Borax + boric acid (d) CH3COOH + CH3COONa

Solution. Answer (from key): (c), (d). Boric acid with borax and acetic acid with sodium acetate are weak acid plus conjugate-base salt pairs; HCl + NaCl has no weak species.

Teacher's Note: Weak acid plus its salt of a strong base.

Exam Note: Mixtures with strong acids fail.

Self Assessment: Assertion-Reason Type Questions

Self-Assessment Q13. Assertion: Mixture of CH3COOH and CH3COONH4 is not a buffer solution. Reason: Acid buffer contains the mixture of weak acid and its salt with strong base.

Solution. Answer (from key): (d). Following the book's coding, the assertion is judged incorrect (a weak acid with its ammonium salt still resists pH change), while the reason is a correct description of a typical acid buffer.

Teacher's Note: Buffer needs a weak acid and a conjugate base source.

Exam Note: Salt of weak base can still serve.

Self-Assessment Q14. Assertion: Addition of NH4OH to an aqueous solution of BaCl2 in the presence of excess NH4Cl, precipitates Ba(OH)2. Reason: Ba(OH)2 is soluble in water.

Solution. Answer (from key): (d). Ba(OH)2 is soluble, so no precipitate forms; the assertion is false and the reason is true.

Teacher's Note: Soluble hydroxide cannot precipitate.

Exam Note: Ba(OH)2 is a soluble strong base.

Self-Assessment Q15. Assertion: pH of blood does not change inspite of taking acidic foods. Reason: Blood behaves as buffer solution.

Solution. Answer (from key): (a). Blood contains the H2CO3/HCO3− and protein buffers, which explain the constant pH.

Teacher's Note: Buffers absorb added acid.

Exam Note: Reason directly explains assertion.

Self-Assessment Q16. Assertion: Borax forms alkaline aqueous solution. Reason: Borax is the salt of a weak acid (H3BO3) and a strong base (NaOH).

Solution. Answer (from key): (a). Borate hydrolyses to give OH−, so the solution is alkaline; the reason explains why.

Teacher's Note: Weak acid, strong base salt is basic.

Exam Note: Anion hydrolysis releases OH−.

Self-Assessment Q17. Assertion: When the aqueous solution of CH3COONH4 is diluted, then its degree of hydrolysis does not change. Reason: It is the salt of a weak acid and a weak base hence its degree of hydrolysis does not depend on the concentration.

Solution. Answer (from key): (a). For a salt of weak acid and weak base h = √(Kw/(KaKb)), independent of concentration, which explains the assertion.

Teacher's Note: Formula has no concentration term.

Exam Note: h is concentration-independent here.

Self Assessment: Matrix-Matching Type Questions

Self-Assessment Q18. Match Column-I with Column-II. Column-I (salt solution in water): (a) NaCl (b) CH3COONa (c) NH4CN (d) NH4Cl. Column-II (nature of hydrolysis): (p) Cationic hydrolysis (q) Anionic hydrolysis (r) Both cationic and anionic hydrolysis (s) Does not undergo hydrolysis

Solution. Answer (from key): (a-s), (b-q), (c-r), (d-p). NaCl: strong-strong, no hydrolysis; CH3COONa: anion hydrolyses; NH4CN: both ions hydrolyse; NH4Cl: cation hydrolyses.

Teacher's Note: Classify by weak parent acid or base.

Exam Note: Both-ion hydrolysis needs weak acid and weak base.

Self-Assessment Q19. Match Column-I with Column-II. Column-I: (a) H3PO2 (b) H3PO4 (c) H3PO3 (d) H3BO3. Column-II: (p) Dibasic (q) Monobasic (r) Tribasic (s) Aprotic

Solution. Answer (from key): (a-q), (b-r), (c-p), (d-q, s). H3PO2 has one P–OH (monobasic); H3PO4 three (tribasic); H3PO3 two (dibasic); H3BO3 is monobasic and an aprotic (Lewis) acid, accepting OH−.

Teacher's Note: Count P–OH groups; boric acid is a Lewis acid.

Exam Note: Boric acid does not donate H+ directly.

Self-Assessment Q20. Match Column-I with Column-II. Column-I (salt): (a) NH4Cl (b) NaCl (c) CH3COONa (d) CH3COONH4. Column-II (degree of hydrolysis): (p) no hydrolysis (q) h = √(Kh/C) (r) h = √(Kw/(KbC)) (s) h = √(Kw/(KaKb)) (as read from the scan)

Solution. Answer (from key): (a-q, r), (b-p), (c-q), (d-s). NH4Cl: h = √(Kh/C) = √(Kw/(KbC)); NaCl: none; CH3COONa: h = √(Kh/C); CH3COONH4: h = √(Kw/(KaKb)). Column-II wording read from a poor scan; matches follow the key.

Teacher's Note: Single-ion hydrolysis depends on C; two-ion does not.

Exam Note: Weak-weak salts: no C in h.

OP Tandon Solutions for JEE Mathematics: OP Tandon Solutions Physical Chemistry IIT JEE Chapter 10 Ionic Equilibrium Part 3

Complete Math Solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 10 Ionic Equilibrium Part 3

Access the complete chapter-wise PDF for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 10 Ionic Equilibrium Part 3. These structured OP Tandon Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these OP Tandon Solutions for JEE Chemistry?

They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the OP Tandon JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these OP Tandon solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising OP Tandon JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.