OP Tandon Solutions for JEE Chemistry: Chapter 10 Ionic Equilibrium
Review structured textbook solutions for JEE Chemistry Chapter 10 Ionic Equilibrium prepared by OP Tandon. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice JEE Chemistry Solutions: Chapter 10 Ionic Equilibrium
View or download the dedicated Chapter 10 Ionic Equilibrium solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
Chapter 10 Ionic Equilibrium - Part 1 (Ostwald Law, Solubility Product, Acids and Bases, pH, Buffers)
10.2 Ostwald's Dilution Law - Some Solved Examples
Question Example 1. A 0.01 M solution of acetic acid is 5% ionised at 25°C. Calculate its dissociation constant.
Solution. According to Ostwald's dilution law, Ka = α2/[(1 − α)V]. Here α = 0.05 and V = 1/0.01 = 100 litre. Hence Ka = (0.05 × 0.05)/[(1 − 0.05) × 100] = 2.63 × 10−5.
Teacher's Note: Use Ka = α²/((1−α)V) without approximation because α is as large as 5%.
Exam Note: Show formula, V = 1/C, then substitution.
Question Example 2. Calculate the H+ ion concentration of a 0.01 N monobasic acid. The value of dissociation constant is 4.0 × 10−10.
Solution. HA ⇌ H+ + A−. By Ostwald's dilution law for a weak acid, α = √(KaV). Ka = 4.0 × 10−10, V = 1/0.01 = 100 litre, so α = √(4 × 10−10 × 102) = 2 × 10−4.
Concentration of hydrogen ions = α/V = 2 × 10−4/100 = 2 × 10−6 mol L−1.
Or, [H+] = √(CK) = √(0.01 × 4 × 10−10) = 2 × 10−6 mol L−1.
Teacher's Note: For a very weak acid, [H⁺] = √(Ka·C); check α ≪ 1 first.
Exam Note: Quote both α-route and √(CK) shortcut for marks.
Question Example 3. The concentration of H+ ions in 0.10 M solution of a weak acid is 1.0 × 10−5 mol L−1. Calculate the dissociation constant of the acid.
Solution. HA ⇌ H+ + A−. Initial concentration: 0.1, 0, 0. At equilibrium (mol L−1): 0.1 − 1.0 × 10−5, 1.0 × 10−5, 1.0 × 10−5. [HA] can be taken as 0.1 M as 1.0 × 10−5 is very small. Applying law of mass action, Ka = [H+][A−]/[HA] = (1.0 × 10−5 × 1.0 × 10−5)/0.10 = 1 × 10−9.
Teacher's Note: [H⁺] = [A⁻] for a monoprotic acid; neglect x against 0.1.
Exam Note: Write ICE-style equilibrium row, then Ka expression.
Question Example 4. What will be the dissociation constant of 0.1 N aqueous ammonia solution in terms of degree of dissociation 'α'? What will be the value if the concentration is 0.01 N?
Solution. NH4OH ⇌ NH4+ + OH−. At equilibrium: (1 − α), α, α. Since the solution is 0.1 N, V = 1/0.1 = 10 litre. [NH4OH] = (1 − α)/10, [NH4+] = α/10 and [OH−] = α/10.
Applying law of mass action, Kb = [NH4+][OH−]/[NH4OH] = (α/10 × α/10)/[(1 − α)/10] = α2/[10(1 − α)].
For 0.01 N solution, Kb remains the same at the same temperature but the degree of dissociation changes (V = 100 litre, so Kb = α2/[100(1 − α)]).
Teacher's Note: Kb is temperature-dependent only; α changes with dilution.
Exam Note: Give Kb in terms of α for each concentration.
Question Example 5. A 0.0128 N solution of acetic acid has Λ = 14 mho equiv−1 and Λ∞ = 391 mho eq−1 at 25°C. Calculate the dissociation constant of the acid.
Solution. Degree of dissociation, α = Λ/Λ∞ = 14/391 = 3.58 × 10−2 [1 − α → 1 as α is very small]. Applying Ostwald's dilution law, Ka = α2/[(1 − α)V], with α = 3.58 × 10−2 and V = 1/0.0128 litre. So Ka = 3.58 × 10−2 × 3.58 × 10−2 × 0.0128 = 1.64 × 10−5.
Teacher's Note: Conductivity gives α = Λ/Λ∞; then substitute in Ostwald law.
Exam Note: State α = Λ/Λ∞ first; units: mol L⁻¹.
10.3 Common Ion Effect - Some Solved Examples
Question Example 6. The ionisation constant of HCN is 4 × 10−10. Calculate the concentration of hydrogen ions in 0.2 M solution of HCN containing 1 mol L−1 of KCN.
Solution. HCN ⇌ H+ + CN−. Applying law of mass action, Ka = [H+][CN−]/[HCN], or [H+] = Ka[HCN]/[CN−].
In presence of strong electrolyte, the total CN− concentration comes from KCN which undergoes complete dissociation. It is further assumed that dissociation of HCN is very-very small and the concentration of HCN can be taken as the concentration of undissociated HCN. Thus [HCN] = 0.2 M and [CN−] = 1 M.
[H+] = (4 × 10−10 × 0.2)/1 = 8 × 10−11 mol L−1.
Note: When KCN is not present, [H+] = √(CK) = √(0.2 × 4 × 10−10) = 8.94 × 10−6 mol L−1. This shows that concentration of H+ falls considerably when KCN is added to HCN solution.
Teacher's Note: Common ion CN⁻ from KCN suppresses HCN ionisation; use [H⁺] = Ka[HCN]/[CN⁻].
Exam Note: Note [H⁺] falls from 8.94×10⁻⁶ to 8×10⁻¹¹.
Question Example 7. Determine the concentration of hydroxyl ions in 0.4 M NH4OH solution having (i) no ammonium chloride and (ii) 5.35 g of NH4Cl in a litre of the solution. Ionisation constant of NH4OH is 1.8 × 10−5.
Solution. (i) Let α be the degree of dissociation of NH4OH in absence of NH4Cl. α = √(Kb/C). So [OH−] = Cα = √(KbC) = √(1.8 × 10−5 × 0.4) = 2.68 × 10−3 mol L−1.
(ii) In presence of NH4Cl, [NH4+] = 5.35/53.5 = 0.1 M and [NH4OH] = 0.4 M. So [OH−] = Kb[NH4OH]/[NH4+] = (1.8 × 10−5 × 0.4)/0.1 = 7.2 × 10−5 mol L−1.
Teacher's Note: Convert grams of NH₄Cl to moles (M = 53.5); NH₄⁺ comes only from the salt.
Exam Note: Compare (i) and (ii) to show common-ion suppression.
Question Example 8. When 0.100 mole of ammonia, NH3, is dissolved in sufficient water to make 1.0 L of solution, the solution is found to have a hydroxide ion concentration of 1.34 × 10−3 M. Calculate Kb for ammonia.
Solution. NH3 + H2O ⇌ NH4+ + OH−. At equilibrium: [NH3] = (0.100 − 1.34 × 10−3) M = 0.09866 M; [NH4+] = [OH−] = 1.34 × 10−3 M.
Kb = [NH4+][OH−]/[NH3] = (1.34 × 10−3 × 1.34 × 10−3)/0.09866 = 1.8199 × 10−5 ≈ 1.82 × 10−5.
Teacher's Note: Subtract ionised amount from initial NH₃ to get equilibrium [NH₃].
Exam Note: Water omitted from Kb; keep three significant figures.
Question Example 9. Ka for HA is 4.9 × 10−8. After making the necessary approximation, calculate for its decimolar solution (a) % dissociation (b) H+ ion concentration.
Solution. (a) For a weak electrolyte, α = √(Ka/C) = √(4.9 × 10−8/0.1) = 7 × 10−4. % dissociation = 100 × α = 100 × 7 × 10−4 = 7 × 10−2.
(b) HA ⇌ H+ + A−; equilibrium: C(1 − α), Cα, Cα. [H+] = C × α = 0.1 × 7 × 10−4 = 7 × 10−5 mol L−1.
Teacher's Note: Decimolar means 0.1 M; α = √(Ka/C) as α ≪ 1.
Exam Note: Remember % dissociation = 100α, not α.
Question Example 10. Nicotinic acid (Ka = 1.4 × 10−5) is represented by the formula HNiC. Calculate its per cent dissociation in a solution which contains 0.10 mole of nicotinic acid per 2 litre of solution. (IIT 1993)
Solution. Initial concentration of nicotinic acid = 0.10/2 = 0.05 mol L−1. HNiC ⇌ H+ + NiC−; equilibrium concentration: (0.05 − x), x, x. As x is very small, (0.05 − x) can be taken as 0.05.
Ka = [H+][NiC−]/[HNiC] = x·x/0.05, or x2 = (0.05) × (1.4 × 10−5), or x = 0.83 × 10−3 mol L−1. % dissociation = (0.83 × 10−3/0.05) × 100 = 1.66.
Alternative method: Let α be the degree of dissociation. At equilibrium: 0.05(1 − α), 0.05α, 0.05α. Ka = (0.05α × 0.05α)/[0.05(1 − α)]. As α is very small, (1 − α) → 1, so 1.4 × 10−5 = 0.05α2, or α = √(1.4 × 10−5/0.05) = 1.67 × 10−2. Per cent dissociation = 100 × α = 100 × 1.67 × 10−2 = 1.67.
(Working: x = √(7 × 10−7) = 8.37 × 10−4, so the two printed values 1.66 and 1.67 are the same result, about 1.67%.)
Teacher's Note: Concentration is 0.10 mol per 2 L = 0.05 M, not 0.10 M.
Exam Note: Use C = moles/volume; trap: forgetting to halve.
Question Example 11. At 30°C, the degree of dissociation of 0.066 M HA is 0.0145. What would be the degree of dissociation of 0.02 M solution of the acid at the same temperature?
Solution. Let the ionisation constant of the acid be Ka. Degree of dissociation at 0.066 M concentration = 0.0145. Applying α = √(Ka/C): 0.0145 = √(Ka/0.066) ... (i). Let the degree of dissociation at 0.02 M be α1: α1 = √(Ka/0.02) ... (ii).
Dividing eq. (ii) by eq. (i): α1/0.0145 = √(0.066/0.02) = 1.8166, or α1 = 0.0145 × 1.8166 = 0.0263.
Teacher's Note: Same temperature means same Ka; α ∝ 1/√C.
Exam Note: Divide the two α equations so Ka cancels.
Question Example 12. A solution contains 0.1 M H2S and 0.3 M HCl. Calculate the concentration of S2− and HS− ions in solution. Given Ka1 and Ka2 for H2S are 10−7 and 1.3 × 10−13 respectively. (IIT 1992)
Solution. H2S ⇌ H+ + HS−, Ka1 = [H+][HS−]/[H2S] ... (i). HS− ⇌ H+ + S2−, Ka2 = [H+][S2−]/[HS−] ... (ii). Multiplying both equations, Ka1 × Ka2 = [H+]2[S2−]/[H2S].
Due to common ion, the ionisation of H2S is suppressed and the [H+] in solution is due to the presence of 0.3 M HCl.
[S2−] = Ka1 × Ka2[H2S]/[H+]2 = (1.0 × 10−7 × 1.3 × 10−13 × 0.1)/(0.3)2 = 1.44 × 10−20 M.
Putting the value of [S2−] in eq. (ii): 1.3 × 10−13 = (0.3 × 1.44 × 10−20)/[HS−], so [HS−] = (0.3 × 1.44 × 10−20)/(1.3 × 10−13) = 3.3 × 10−8 M.
Teacher's Note: HCl fixes [H⁺] = 0.3; use Ka1·Ka2 for S²⁻ and Ka2 for HS⁻.
Exam Note: Take [H⁺] from HCl alone; state both answers.
Question Example 13. What is the H+ ion concentration of a solution known to contain 0.1 g mole of CH3COONH4 in one litre of 0.1 M CH3COOH? Assume effective ionisation of ammonium acetate is 80%. Ka for acetic acid is 1.8 × 10−5.
Solution. CH3COOH ⇌ CH3COO− + H+; equilibrium: (0.1 − x), x, x. Ka = [CH3COO−][H+]/[CH3COOH].
The solution also contains CH3COONH4 which is 80% dissociated, i.e., α = 0.8. Thus the acetate concentration provided by 0.1 M CH3COONH4 = 0.1 × 0.8 = 0.08 M. Total [CH3COO−] = (0.08 + x) M.
So Ka = (0.08 + x)x/(0.1 − x). As x is very small, (0.1 − x) → 0.1 and neglecting x2, Ka = 0.08x/0.1, or 1.8 × 10−5 × 0.1 = 0.08x, or x = [H+] = (1.8 × 10−5 × 0.1)/0.08 = 2.25 × 10−5 mol L−1.
Teacher's Note: Salt is only 80% ionised, so acetate from salt is 0.08 M, not 0.1 M.
Exam Note: Apply 80% factor to salt before Ka expression.
Question Example 14. Ostwald obtained the following table by determining the equivalent conductivities containing one gram equivalent of acetic acid in V litre. If the equivalent conductivity of acetic acid at infinite dilution be 364, show that the results are in agreement with Ostwald's law.
Volume in litre (V): 8, 64, 128; Equivalent conductivity: 4.34, 12.09, 16.99
Solution. Degree of dissociation, α = ΛV/Λ∞.
(i) α1 = 4.34/364 = 0.0119
(ii) α2 = 12.09/364 = 0.0332
(iii) α3 = 16.99/364 = 0.0467
Now applying Ostwald's dilution law, Ka = α2/V:
(i) Ka = (0.0119 × 0.0119)/8 = 1.77 × 10−5
(ii) Ka = (0.0332 × 0.0332)/64 = 1.72 × 10−5
(iii) Ka = (0.0467 × 0.0467)/128 = 1.70 × 10−5
The values of Ka are nearly the same, which shows the validity of Ostwald's dilution law.
Teacher's Note: Ostwald law holds if Ka = α²/V stays constant across dilutions.
Exam Note: Tabulate α and Ka; conclude constancy explicitly.
Question Example 15. Calculate the dissociation constant of H2C2O4 (oxalic acid) if 0.02 M solution is 2% dissociated.
Solution. H2C2O4 ⇌ 2H+ + C2O42−; equilibrium: C(1 − α), 2Cα, Cα.
Ka = [H+]2[C2O42−]/[H2C2O4] = (2Cα)2 × (Cα)/[C(1 − α)] = 4C2α3/(1 − α) = 4C2α3 [1 − α → 1 as α is small] = 4 × 0.02 × 0.02 × (0.02)3 = 1.28 × 10−8.
Teacher's Note: Overall Ka with 2 H⁺ gives (2Cα)²(Cα)/C(1−α), so cube of α appears.
Exam Note: Write stoichiometric 2Cα for H⁺; square it.
Illustrations of Objective Questions (Ostwald Law)
Question Objective Q1. A monoprotic acid in 0.1 M solution ionizes to 0.001%. Its ionization constant is: (a) 1 × 10−3 (b) 1 × 10−6 (c) 1 × 10−8 (d) 1 × 10−11
Solution. Answer: (d). α = 0.001% = 10−5. For a weak acid, α = √(Ka/C), or Ka = Cα2 = 0.1 × (0.001/100)2 = 1 × 10−11.
Teacher's Note: Convert % to fraction first: 0.001% = 10⁻⁵.
Exam Note: Percent to fraction conversion is the usual trap.
Question Objective Q2. The hydrogen ion concentration in mol/dm3 in 0.2 M solution of weak acid, HA (Ka = 2 × 10−5) is close to: (a) 2 × 10−5 (b) 2 × 10−4 (c) 2 × 10−3 (d) 2 × 10−2
Solution. Answer: (c). [H3O+] = √(CKa) = √(0.2 × 2 × 10−5) = 2 × 10−3.
Teacher's Note: Weak acid: [H⁺] = √(Ka·C) when α is small.
Exam Note: One-line √(CKa) substitution suffices.
Question Objective Q3. Autoprotolysis constant of NH3 is: (a) [NH4+][NH3] (b) [NH2−][NH3] (c) [NH4+][NH2−] (d) [NH4+]/[NH2−]
Solution. Answer: (c). Autoprotolysis of NH3 takes place as 2NH3 ⇌ NH4+ + NH2−. Therefore autoprotolysis constant = [NH4+][NH2−].
Teacher's Note: Like Kw of water: product of the two ions, pure liquid omitted.
Exam Note: Write the equilibrium first, then the product.
Question Objective Q4. The degree of ionization of an acid HA is 0.00001 at 0.1 M concentration. Its dissociation constant will be: (a) 10−9 (b) 10−8 (c) 10−11 (d) 10−7
Solution. Answer: (c). For monoprotic acid HA: Ka = Cα2 = 0.1 × (10−5)2 = 10−11.
Teacher's Note: α = 10⁻⁵ is tiny, so Ka = Cα² applies directly.
Exam Note: Square α before multiplying by C.
Question Objective Q5. The first and second dissociation constants of an acid, H2A, are 1.0 × 10−5 and 5.0 × 10−10 respectively. The overall dissociation constant of the acid will be: (a) 0.2 × 105 (b) 5.0 × 10−5 (c) 5.0 × 10−15 (d) 5.0 × 1015 (AIEEE 2007)
Solution. Answer: (c). Ka = Ka1 × Ka2 = 1 × 10−5 × 5 × 10−10 = 5 × 10−15.
Teacher's Note: Overall constant for stepwise equilibria is the product of the steps.
Exam Note: Multiply, do not add, the stepwise constants.
10.4 Solubility Product - Some Solved Examples
Question Example 16. The solubility product of silver chloride is 1.5625 × 10−10 at 25°C. Find its solubility in g L−1.
Solution. Let the solubility of AgCl be S mol litre−1. AgCl ⇌ Ag+ + Cl− (S, S). Hence S2 = 1.5625 × 10−10, or S = 1.25 × 10−5 mol L−1. Molecular mass of AgCl = (108 + 35.5) = 143.5. So solubility in g litre−1 = Mol. mass × S = 143.5 × 1.25 × 10−5 = 1.79 × 10−3 g L−1.
Teacher's Note: For AB type, S = √Ksp; multiply by molar mass for g/L.
Exam Note: Final answer must be in g L⁻¹, not mol L⁻¹.
Question Example 17. The solubility of PbSO4 in water is 0.038 g L−1 at 25°C. Calculate its solubility product at the same temperature.
Solution. Solubility (S) of PbSO4 in mol L−1 = 0.038/Mol. mass of PbSO4 = 0.038/303 = 1.254 × 10−4. The equilibrium is PbSO4 ⇌ Pb2+ + SO42− (S, S). So Ks = [Pb2+][SO42−] = S × S = S2, or Ks = 1.254 × 10−4 × 1.254 × 10−4 = 1.573 × 10−8.
Teacher's Note: Convert g/L to mol/L with M = 303 before squaring.
Exam Note: Show molar mass working; Ksp has no unit here.
Question Example 18. The concentration of Ag+ ion in a saturated solution of Ag2CrO4 at 20°C is 1.5 × 10−4 mol L−1. Determine the solubility product of Ag2CrO4 at 20°C.
Solution. The equilibrium is Ag2CrO4 ⇌ 2Ag+ + CrO42−. On the basis of this equation, the concentration of CrO42− ions will be half of the concentration of Ag+ ions. Thus [Ag+] = 1.5 × 10−4 M and [CrO42−] = 0.75 × 10−4 M.
Ks = [Ag+]2[CrO42−] = (1.5 × 10−4)2(0.75 × 10−4) = 1.6875 × 10−12.
Teacher's Note: Given [Ag⁺] = 2S, so [CrO₄²⁻] = half of it.
Exam Note: Square the Ag⁺ concentration, not CrO₄²⁻.
Question Example 19. The solubility product of BaSO4 is 1.5 × 10−9. Find out the solubility in (i) pure water and (ii) 0.1 M BaCl2 solution.
Solution. (i) BaSO4 ⇌ Ba2+ + SO42−. Let S be the solubility in mol litre−1; then Ks = [Ba2+][SO42−] = S2, or 1.5 × 10−9 = S2. So S = 3.87 × 10−5 mol L−1.
(ii) Let S′ be the solubility of BaSO4 in 0.1 M BaCl2 solution. Total Ba2+ ions concentration = (S′ + c) mol L−1 and SO42− ions concentration = S′ mol L−1. So Ks = (S′ + c)S′ = (S′ + 0.1)S′, or 1.5 × 10−9 = (S′ + 0.1)S′, or (S′)2 + 0.1S′ = 1.5 × 10−9. Neglecting (S′)2, 0.1S′ = 1.5 × 10−9, or S′ = 1.5 × 10−8 mol L−1.
Teacher's Note: Common ion Ba²⁺ from BaCl₂ lowers solubility; neglect S′² against 0.1S′.
Exam Note: Compare 3.87×10⁻⁵ with 1.5×10⁻⁸ to show suppression.
Question Example 20. The solubility of Mg(OH)2 in pure water is 9.57 × 10−3 g L−1. Calculate its solubility in g L−1 in 0.02 M Mg(NO3)2 solution.
Solution. Solubility of Mg(OH)2 in pure water = 9.57 × 10−3 g L−1 = (9.57 × 10−3/58) mol L−1 = 1.65 × 10−4 mol L−1. Mg(OH)2 ⇌ Mg2+ + 2OH− (S, 2S). Ks = [Mg2+][OH−]2 = S × (2S)2 = 4S3 = 4 × (1.65 × 10−4)3 = 17.9685 × 10−12.
Let S′ be the solubility of Mg(OH)2 in presence of Mg(NO3)2: [Mg2+] = (S′ + c) = (S′ + 0.02), [OH−] = 2S′. So Ks = (S′ + 0.02)(2S′)2; 17.9685 × 10−12 = 4(S′)2(S′ + 0.02), or 17.9685 × 10−12/4 = (S′)3 + 0.02(S′)2 [neglecting (S′)3]. 4.4921 × 10−12 = 0.02(S′)2, or (S′)2 = (4.4921/0.02) × 10−12, or S′ = 14.9868 × 10−6 mol L−1.
Solubility of Mg(OH)2 in g litre−1 = S′ × M = 14.9868 × 10−6 × 58 = 8.69 × 10−4 g L−1.
Teacher's Note: Convert g/L to mol/L, find Ksp = 4S³, then redo with common Mg²⁺.
Exam Note: Mg(OH)₂ is 1:2 type; OH⁻ is 2S′ and squared.
Question Example 21. The solubility product of lead iodide is 1.4 × 10−8. Calculate its molar solubility in 0.1 M KI solution.
Solution. Let the solubility of PbI2 be S. PbI2 ⇌ Pb2+ + 2I− (S, S, 2S). Potassium iodide is a strong electrolyte and is completely ionised. It shall provide I− ion concentration = 0.1 M. So [Pb2+] = S, [I−] = (2S + 0.1) M.
Ksp = [Pb2+][I−]2 = S × (2S + 0.1)2 = S × (4S2 + 0.01 + 0.4S) = 4S3 + 0.01S + 0.4S2. Neglecting S3 and S2: 1.4 × 10−8 = 0.01S, or S = 1.4 × 10−8/0.01 = 1.4 × 10−6 mol L−1.
Teacher's Note: KI supplies 0.1 M I⁻; 2S is negligible beside 0.1, so Ksp ≈ S(0.1)².
Exam Note: Neglect 2S against 0.1 and say so.
Question Example 22. The solubility product of lead bromide is 8 × 10−5. If the salt is 80% dissociated in saturated solution, find the solubility of the salt.
Solution. Let S be the solubility of the salt. Degree of dissociation of the salt = 0.8. PbBr2 ⇌ Pb2+ + 2Br− (0.8S, 2 × 0.8S).
Ksp = [Pb2+][Br−]2 = (0.8S) × (1.6S)2 = 2.048S3, or S3 = 8 × 10−5/2.048 = 3.906 × 10−5, S = (3.906 × 10−5)1/3 = 3.39 × 10−2 mol L−1.
Mol. mass of PbBr2 = 367. Solubility of PbBr2 = 3.39 × 10−2 × 367 = 12.44 g L−1.
Teacher's Note: Only 80% of dissolved salt gives ions: [Pb²⁺] = 0.8S, [Br⁻] = 1.6S.
Exam Note: Apply α to both ions before cubing.
Question Example 23. A solution has 0.05 M Mg2+ and 0.05 M NH3. Calculate the concentration of NH4Cl required to prevent the formation of Mg(OH)2 in this solution. Ksp of Mg(OH)2 = 9.0 × 10−12 and ionisation constant of NH3 = 1.8 × 10−5. (IIT 1993)
Solution. The maximum concentration of [OH−] ions that will precipitate Mg(OH)2 is calculated by applying Ksp = [Mg2+][OH−]2. [OH−]2 = Ksp/[Mg2+] = 9.0 × 10−12/0.05 = 1.8 × 10−10, or [OH−] = 1.34 × 10−5 M.
NH3 is present in solution in the form of NH4OH: NH3 + H2O ⇌ NH4OH ⇌ NH4+ + OH− (0.05, 0.05). The ionisation of NH4OH is suppressed by the addition of NH4Cl (strong electrolyte). KNH3 = KNH4OH = [NH4+][OH−]/[NH4OH].
Whole of the concentration of NH4+ ions is provided by NH4Cl. [NH4+] = KNH4OH × [NH4OH]/[OH−] = (1.8 × 10−5 × 0.05)/(1.34 × 10−5) = 0.067 M, i.e., [NH4Cl] = 0.067 M.
Teacher's Note: Find the largest [OH⁻] that keeps Qsp ≤ Ksp, then buffer OH⁻ with NH₄⁺.
Exam Note: Two steps: [OH⁻] from Ksp, then [NH₄⁺] from Kb.
Question Example 24. The solubility product of Ag2C2O4 at 25°C is 1.29 × 10−11 mol3 L−3. A solution of K2C2O4 containing 0.1520 mole in 500 mL of water is shaken with excess of Ag2CO3 till the following equilibrium is reached: Ag2CO3 + K2C2O4 ⇌ Ag2C2O4 + K2CO3. At equilibrium, the solution contains 0.0358 mole of K2CO3. Assuming the degree of dissociation of K2C2O4 and K2CO3 to be equal, calculate the solubility product of Ag2CO3. (IIT 1991)
Solution. Initial K2C2O4 = 0.1520 mole. At equilibrium K2C2O4 = (0.1520 − 0.0358) = 0.1162 mole; K2CO3 = 0.0358 mole. Concentrations (500 mL): K2C2O4 = 2 × 0.1162 = 0.2324 M; K2CO3 = 2 × 0.0358 = 0.0716 M.
Ksp(Ag2C2O4) = [Ag+]2[C2O42−], so [Ag+] = [Ksp(Ag2C2O4)/[C2O42−]]1/2. Similarly [Ag+] = [Ksp(Ag2CO3)/[CO32−]]1/2. [Ag+] is the same in both, so Ksp(Ag2CO3) = Ksp(Ag2C2O4) × [CO32−]/[C2O42−] = Ksp(Ag2C2O4) × [K2CO3]/[K2C2O4] = 1.29 × 10−11 × 0.0716/0.2324 = 3.97 × 10−12 mol3 L−3.
Teacher's Note: Both solids saturate the same solution, so [Ag⁺] is common; divide the Ksp expressions.
Exam Note: Equal α lets salt concentrations replace ion ratios.
Question Example 25. 20 mL of 0.001 M AgNO3 solution is added to 1 litre of 0.002 M K2CrO4 solution. Will there be any precipitation? Ksp of Ag2CrO4 is 2.4 × 10−12.
Solution. No. of moles of Ag+ in 20 mL = (20/1000) × 0.001 = 2 × 10−5. No. of moles CrO42− in one litre = 0.002 = 2 × 10−3. After mixing, total volume of the solution = 1000 + 20 = 1020 mL = 1.02 L.
[Ag+] = 2 × 10−5/1.02 = 1.96 × 10−5; [CrO42−] = 2 × 10−3/1.02 = 1.96 × 10−3.
Ionic product = [Ag+]2[CrO42−] = (1.96 × 10−5)2(1.96 × 10−3) = 7.53 × 10−13. There will be no precipitation of Ag2CrO4 as ionic product is less than solubility product.
Teacher's Note: Dilute after mixing (1.02 L), then compare ionic product with Ksp.
Exam Note: Ionic product < Ksp means no precipitate.
Question Example 26. Calculate simultaneous solubility of AgCNS and AgBr in a solution of water. Ksp of AgCNS = 1 × 10−12, Ksp of AgBr = 5 × 10−13.
Solution. Let the solubility of AgCNS and AgBr in water be a and b respectively. AgCNS ⇌ Ag+ + CNS− (a, a); AgBr ⇌ Ag+ + Br− (b, b). [Ag+] = a + b, [CNS−] = a and [Br−] = b.
Ksp(AgCNS) = [Ag+][CNS−] = a(a + b); 1 × 10−12 = a(a + b) ... (i). Ksp(AgBr) = [Ag+][Br−] = b(a + b); 5 × 10−13 = b(a + b) ... (ii).
Dividing eq. (i) by (ii): 1 × 10−12/(5 × 10−13) = a/b, so 2 = a/b, or a = 2b. Putting the value of a in eq. (i): 6b2 = 1 × 10−12, b2 = (1/6) × 10−12, b = 4.08 × 10−7 mol L−1, a = 2 × 4.08 × 10−7 = 8.16 × 10−7 mol L−1.
Teacher's Note: Charge balance gives [Ag⁺] = a + b; dividing Ksp equations gives a/b.
Exam Note: State both a and b as the answer.
Question Example 27. The Ksp of Ca(OH)2 is 4.42 × 10−5 at 25°C. 500 mL of saturated solution of Ca(OH)2 is mixed with equal volume of 0.4 M NaOH. How much Ca(OH)2 in mg is precipitated? (IIT 1992)
Solution. Let S be the solubility of Ca(OH)2 in saturated solution. Ca(OH)2 ⇌ Ca2+ + 2OH− (S, 2S). Ksp = [Ca2+][OH−]2; 4.42 × 10−5 = S × 4S2 = 4S3, so S = 0.0223 mol L−1.
After mixing the two solutions, the total volume becomes 1 litre. [Ca2+] = (0.0223 × 500)/1000 = 0.01115 mol L−1. [OH−] = (0.0223 × 2 × 500)/1000 [from Ca(OH)2] + (0.4 × 500)/1000 [from NaOH] = 0.2223 mol L−1.
Under the high concentration of OH− ions, some Ca(OH)2 will be precipitated. [Ca2+]left[OH−]2 = Ksp, so [Ca2+]left = 4.42 × 10−5/(0.2223)2 = 8.94 × 10−4 mol L−1.
Moles of Ca(OH)2 precipitated = moles of Ca2+ precipitated = [Ca2+]initial − [Ca2+]left = 0.01115 − 8.94 × 10−4 = 111.5 × 10−4 − 8.94 × 10−4 = 102.56 × 10−4 mol = 102.56 × 10−4 × 74 g = 7589.44 × 10−4 g = 758.944 mg.
Teacher's Note: Mixing halves each concentration; excess OH⁻ pushes Ca²⁺ down to Ksp/[OH⁻]².
Exam Note: Convert moles to mg using M = 74.
Illustrations of Objective Questions (Solubility Product)
Question Objective Q6. The solubility product of sparingly soluble salt Ag2CrO4 is 4 × 10−12. The molar solubility of the salt is: (a) 1 × 10−4 mol L−1 (b) 2 × 10−6 mol L−1 (c) 1 × 10−5 mol L−1 (d) 2 × 10−12 mol L−1
Solution. Answer: (a). Ksp = [Ag+]2[CrO42−]. If solubility of Ag2CrO4 is S, then [Ag+] = 2S and [CrO42−] = S. Ksp = 4S3; 4 × 10−12 = 4S3, S = 1 × 10−4 M.
Teacher's Note: A₂B type: Ksp = 4S³, so S = (Ksp/4)^(1/3).
Exam Note: Cube root of 10⁻¹² is 10⁻⁴.
Question Objective Q7. The solubility of PbSO4 at 25°C is 1.1 × 10−4 mol/L. Then its Ksp is: (a) 1.21 × 10−8 (b) 12.1 × 10−6 (c) 121 × 10−11 (d) 1.21 × 10−10
Solution. Answer: (a). PbSO4 is a binary electrolyte, hence its Ksp can be calculated as Ksp = S2 = (1.1 × 10−4)2 = 1.21 × 10−8.
Teacher's Note: AB type salt: Ksp = S².
Exam Note: Square 1.1 to 1.21, exponent doubles.
Question Objective Q8. The solubility of CaF2 (Ksp = 3.4 × 10−11) in 0.1 M solution of NaF would be: (a) 3.4 × 10−12 M (b) 3.4 × 10−10 M (c) 3.4 × 10−9 M (d) 3.4 × 10−13 M
Solution. Answer: (c). CaF2 ⇌ Ca2+ + 2F− (x, 2x); NaF → Na+ + F− (0.1, 0.1). [Ca2+] = x, [F−] = (2x + 0.1) ≈ 0.1 M. Ksp = [Ca2+][F−]2; 3.4 × 10−11 = x(0.1)2, x = 3.4 × 10−9 M.
Teacher's Note: NaF supplies F⁻; neglect 2x against 0.1 and square 0.1.
Exam Note: Square the common-ion concentration, not just use 0.1.
Question Objective Q9. The solubility product of AgCl is 1.8 × 10−10. Precipitation of AgCl will occur only when equal volumes of which of the following solutions are mixed? (a) 10−4 M Ag+ and 10−4 M Cl− (b) 10−7 M Ag+ and 10−7 M Cl− (c) 10−5 M Ag+ and 10−5 M Cl− (d) 10−10 M Ag+ and 10−10 M Cl−
Solution. Answer: (a). After mixing, [Ag+] = (1/2) × 10−4 = 5 × 10−5 M and [Cl−] = (1/2) × 10−4 = 5 × 10−5 M. Kip = [Ag+][Cl−] = (5 × 10−5)2 = 2.5 × 10−9. Since the ionic product is greater than the solubility product, precipitation will take place. (For (c), Kip = 2.5 × 10−11 < 1.8 × 10−10, so no precipitation.)
Teacher's Note: Equal volumes halve each concentration before computing ionic product.
Exam Note: Halving step is the usual trap.
Question Objective Q10. If x mol L−1 is the solubility of KAl(SO4)2, then Ksp is equal to: (a) x3 (b) 4x4 (c) x4 (d) 4x3
Solution. Answer: (b). KAl(SO4)2 → K+ + Al3+ + 2SO42− (x, x, 2x). Ksp = [K+][Al3+][SO42−]2 = x × x × (2x)2 = 4x4.
Teacher's Note: Three ion types: K⁺, Al³⁺, and 2 SO₄²⁻; square the sulfate term.
Exam Note: Count ions from formula; 2x is squared.
Question Objective Q11. For which of the following sparingly soluble salt, the solubility (S) and solubility product (Ksp) are related by the expression S = [Ksp/4]1/3? (a) BaSO4 (b) Ca3(PO4)2 (c) Hg2Cl2 (d) Ag3PO4 (e) CuS [PET (Kerala) 2006]
Solution. Answer: (c). Hg2Cl2 → Hg22+ + 2Cl− (S, 2S). Ksp = [Hg22+][Cl−]2 = [S][2S]2 = 4S3, so S = [Ksp/4]1/3.
Teacher's Note: Ksp = 4S³ identifies an AB₂ or A₂B type salt; Hg₂²⁺ counts as one ion.
Exam Note: Hg₂Cl₂ gives one Hg₂²⁺ and two Cl⁻.
Question Objective Q12. The solubility of Sb2S3 in water is 1 × 10−5 mol/L at 298 K. What will be its solubility product? (a) 108 × 10−25 (b) 1.0 × 10−25 (c) 144 × 10−25 (d) 126 × 10−24 [PMT (Raj.) 2006]
Solution. Answer: (a). Sb2S3 → 2Sb3+ + 3S2− (S, 2S, 3S). Ksp = [Sb3+]2[S2−]3 = [2S]2[3S]3 = 108S5 = 108 × (10−5)5 = 108 × 10−25.
Teacher's Note: A₂B₃ type: Ksp = 108S⁵ from (2S)²(3S)³.
Exam Note: Remember 4 × 27 = 108.
Fractional Precipitation
Question Illustration (Fractional precipitation). Let us suppose 0.1 M Ba2+ and 0.1 M Sr2+ in aqueous solution. K2CrO4 is added as precipitating agent. Ksp of BaCrO4 is 1.2 × 10−10 and Ksp of SrCrO4 is 3.5 × 10−5. Which precipitates first, and what is the remaining Ba2+ when SrCrO4 starts precipitating?
Solution. [CrO42−] concentration required to precipitate BaCrO4 = Ksp/[Ba2+] = 1.2 × 10−10/0.1 = 1.2 × 10−9. BaCrO4 will precipitate first because it requires low concentration of CrO42− ions. On addition of chromate, BaCrO4 starts precipitating when chromate ion concentration reaches 1.2 × 10−9 M. When CrO42− ion concentration reaches up to 3.5 × 10−4 M (= 3.5 × 10−5/0.1), then SrCrO4 also starts precipitating.
Remaining concentration of Ba2+ when SrCrO4 starts precipitation = Ksp(BaCrO4)/[CrO42−] = 1.2 × 10−10/(3.5 × 10−4) = 3.4 × 10−7 M. % remaining concentration = (3.4 × 10−7/0.1) × 100 = 0.00034%.
Teacher's Note: Salt needing the lower anion concentration precipitates first.
Exam Note: Compute both threshold [CrO₄²⁻] values.
Illustrations of Objective Questions (Acids and Bases)
Question Objective Q13. Which one is correct statement? (DCE 2007) (a) Basicity of H3PO4 and H3PO3 are 3 and 3 respectively (b) Acidity of H3PO4 and H3PO3 are 3 and 3 respectively (c) Acidity of H3PO4 and H3PO3 are 3 and 2 respectively (d) Basicity of H3PO4 and H3PO3 are 3 and 2 respectively
Solution. Answer: (d). H3PO4 (O=P(OH)3) ⇌ 3H+ + PO43− (basicity = 3). H3PO3 (HO–P(=O)(H)–OH, one H directly bonded to P) ⇌ 2H+ + HPO32− (basicity = 2).
Teacher's Note: Basicity counts only ionisable O–H hydrogens; P–H hydrogen does not ionise.
Exam Note: Draw structure to count –OH groups.
Question Objective Q14. In the reaction, HC2O4− + PO43− ⇌ HPO42− + C2O42−, the Bronsted base are: [PET (Raj.) 2004] (a) PO43−, C2O42− (b) PO43−, HPO42− (c) HC2O4−, HPO42− (d) HC2O4−, C2O42−
Solution. Answer: (a). Acid − H+ = conjugate base. HC2O4− (acid) gives C2O42− (base); PO43− accepts H+ to give HPO42− (acid). So the bases are PO43− and C2O42−.
Teacher's Note: Base accepts H⁺ forward; its partner on the right is also a base.
Exam Note: Name one conjugate pair on each side.
Question Objective Q15. Conjugate base of HCO3− is: [PET (Raj.) 2005] (a) CO2 (b) H2CO3 (c) H2O (d) CO32−
Solution. Answer: (d). Acid − H+ = conjugate base; HCO3− − H+ = CO32−.
Teacher's Note: Conjugate base = acid minus one proton; H₂CO₃ is the conjugate acid.
Exam Note: Do not confuse conjugate acid with conjugate base.
Question Objective Q16. Four species are listed below: (i) HCO3− (ii) H3O+ (iii) HSO4− (iv) HSO3F. Which one of the following is the correct sequence of their acid strength? (AIEEE 2008) (a) (iii) < (i) < (iv) < (ii) (b) (iv) < (ii) < (iii) < (i) (c) (ii) < (iii) < (i) < (iv) (d) (i) < (iii) < (ii) < (iv)
Solution. Answer: (d). Order: HCO3− < HSO4− < H3O+ < HSO3F. HSO3F is a super acid and it is most acidic. H3O+ is more acidic than anions (HCO3−, HSO4−) because anions do not release H+ easily. HSO4− is more acidic than HCO3− because sulphur is more electronegative than carbon.
Teacher's Note: Neutral super acid > H₃O⁺ > anionic acids; sulfate beats carbonate.
Exam Note: Justify order with charge and electronegativity.
Question Objective Q17. Identify Bronsted-Lowry acids in the reaction given: [Al(H2O)6]3+ (A) + HCO3− (B) ⇌ [Al(H2O)5(OH)]2+ (C) + H2CO3 (D). The correct answer is: [EAMCET (Med.) 2008] (a) A, C (b) B, D (c) A, D (d) B, C
Solution. Answer: (c). [Al(H2O)6]3+ and H2CO3 are proton donors or Bronsted acids.
Teacher's Note: Forward acid donates H⁺ (A); reverse acid is D, the species with extra H.
Exam Note: Mark proton donors on each side.
Question Objective Q18. Conjugate base of H2PO4− is: [Comed (Karnataka) 2008] (a) HPO42− (b) PO43− (c) H3PO4 (d) HPO4−
Solution. Answer: (a). Acid − H+ = conjugate base; H2PO4− − H+ = HPO42−.
Teacher's Note: Remove exactly one H⁺: charge goes from −1 to −2.
Exam Note: Check both formula and charge.
10.9 Hydrogen Ion Concentration - pH Scale
Question Illustration (pH of mixture). One litre of an acidic solution of pH 2 is mixed with two litre of other acidic solution of pH 3. Find the pH of the resulting mixture.
Solution. Sample 1: pH = 2, [H+] = 10−2 M, V = 1 litre. Sample 2: pH = 3, [H+] = 10−3 M, V = 2 litre.
M1V1 + M2V2 = MR(V1 + V2): 10−2 × 1 + 10−3 × 2 = MR(1 + 2), so 12 × 10−3/3 = MR = 4 × 10−3 (MR = resultant molarity). pH = −log(4 × 10−3) = 2.40 (value worked out here; the book leaves it as −log(4 × 10−3)).
Teacher's Note: Mix moles of H⁺, not pH values; divide by total volume.
Exam Note: Average [H⁺] first, then take −log.
10.9 pH - Some Solved Examples
Question Example 28. The hydrogen ion concentration of a solution is 0.001 M. What will be the hydroxyl ion concentration of solution?
Solution. We know that [H+][OH−] = 1.0 × 10−14. Given that [H+] = 0.001 M = 10−3 M. So [OH−] = 1.0 × 10−14/[H+] = (1 × 10−14)/10−3 = 10−11 M.
Teacher's Note: Use Kw = [H⁺][OH⁻] = 10⁻¹⁴ at 25°C.
Exam Note: State temperature assumed for Kw.
Question Example 29. What is the pH of the following solutions? (a) 10−3 M HCl (b) 0.0001 M NaOH (c) 0.0001 M H2SO4
Solution. (a) HCl is a strong electrolyte and is completely ionised. HCl ⇌ H+ + Cl−. So [H+] = 10−3 M; pH = −log[H+] = −log(10−3) = 3.
(b) NaOH is a strong electrolyte and is completely ionised: NaOH ⇌ Na+ + OH−. So [OH−] = 0.0001 M = 10−4 M; pOH = −log(10−4) = 4. As pH + pOH = 14, pH + 4 = 14, or pH = 10.
Alternative method: [OH−] = 10−4 M. We know that [H+][OH−] = 1.0 × 10−14, so [H+] = 1.0 × 10−14/10−4 = 10−10 M; pH = −log(10−10) = 10.
(c) H2SO4 is a strong electrolyte and is ionised completely. H2SO4 ⇌ 2H+ + SO42−. One molecule of H2SO4 furnishes 2H+ ions. So [H+] = 2 × 10−4 M; pH = −log(2 × 10−4) = 3.70.
Teacher's Note: Count H⁺ per formula unit: H₂SO₄ gives 2, so [H⁺] = 2×10⁻⁴.
Exam Note: Use pOH route for bases; pH = 14 − pOH.
Question Example 30. Calculate the pH of the following solutions assuming complete dissociation: (a) 0.365 g L−1 HCl solution (b) 0.001 M Ba(OH)2 solution.
Solution. (a) Mole. mass of HCl = 36.5. Concentration of HCl = 0.365/36.5 = 1.0 × 10−2 mol L−1. HCl is a strong electrolyte and is completely ionised, so [H+] = 1 × 10−2 mol L−1; pH = −log[H+] = −log(1 × 10−2) = 2.
(b) Ba(OH)2 is a strong electrolyte and is completely ionised: Ba(OH)2 ⇌ Ba2+ + 2OH−. One molecule on dissociation furnishes 2OH− ions. So [OH−] = 2 × 10−3 M; pOH = −log[OH−] = −log(2 × 10−3) = 2.7. We know that pH + pOH = 14, so pH = (14 − 2.7) = 11.3.
Teacher's Note: Convert g/L to mol/L first; Ba(OH)₂ gives 2 OH⁻ per formula unit.
Exam Note: Double [OH⁻] for Ba(OH)₂ before taking log.
Question Example 31. Find the pH of a 0.002 N acetic acid solution, if it is 2.3% ionised at a given dilution.
Solution. Degree of dissociation, α = 2.3/100 = 0.023. Concentration of acetic acid, C = 0.002 M. CH3COOH ⇌ CH3COO− + H+ (C(1 − α), Cα, Cα). So [H+] = Cα = 0.002 × 0.023 = 4.6 × 10−5 M. pH = −log[H+] = −log(4.6 × 10−5) = 4.3372.
Teacher's Note: For a weak acid [H⁺] = Cα, not C.
Exam Note: Convert % ionised to fraction first.
Question Example 32. Calculate the pH value of a solution obtained by mixing 50 mL of 0.2 N HCl with 50 mL of 0.1 N NaOH.
Solution. Number of milli-equivalents of the acid = 50 × 0.2 = 10. Number of milli-equivalents of the base = 50 × 0.1 = 5. Number of milli-equivalents of the acid left after the addition of base = (10 − 5) = 5. Total volume of the solution = 50 + 50 = 100 mL. Thus, 5 milli-equivalents of the acid are present in 100 mL of solution, or 50 milli-equivalents in one litre, or 0.05 equivalents in one litre. The acid is monobasic and completely ionised: 0.05 N HCl = 0.05 M HCl, so [H+] = 0.05 M. pH = −log[H+] = −log(5 × 10−2) = −[log 5.0 + log 10−2] = −[0.70 − 2] = 1.3.
Teacher's Note: Neutralise meq of acid with base; divide leftover by total volume.
Exam Note: Use total volume 100 mL, not 50 mL.
Question Example 33. What will be the pH of a solution obtained by mixing 800 mL of 0.05 N sodium hydroxide and 200 mL of 0.1 N HCl, assuming the complete ionisation of the acid and the base?
Solution. Number of milli-equivalents of NaOH = 800 × 0.05 = 40. Number of milli-equivalents of HCl = 200 × 0.1 = 20. Number of milli-equivalents of NaOH left after the addition of HCl = (40 − 20) = 20. Total volume = (200 + 800) mL = 1000 mL = 1 litre. 20 milli-equivalents or 0.02 equivalents of NaOH are present in one litre. 0.02 N NaOH = 0.02 M NaOH (mono-acidic) and the base is completely ionised. So [OH−] = 0.02 M = 2 × 10−2 M; pOH = −log(2 × 10−2) = 1.7. pH = (14 − 1.7) = 12.3.
Teacher's Note: Excess base remains; find pOH then pH = 14 − pOH.
Exam Note: Excess reagent decides whether pH or pOH is found first.
Question Example 34. What is the hydrogen ion concentration of a solution (i) whose pH is 12, (ii) whose pH is 5.6?
Solution. (i) pH = −log[H+], so log[H+] = −pH = −12, or [H+] = 10−12 M.
(ii) log[H+] = −5.6, or [H+] = 10−5.6 = 10−6 × 100.4 = 2.5 × 10−6 M.
Teacher's Note: [H⁺] = 10^(−pH); split non-integer pH into integer and fractional parts.
Exam Note: Write 10⁻⁵·⁶ as 10⁻⁶ × 10⁰·⁴.
Question Example 35. How many moles of calcium hydroxide must be dissolved to produce 250 mL of an aqueous solution of pH 10.65? Assume the complete ionisation.
Solution. pH + pOH = 14, so pOH = (14 − 10.65) = 3.35. [OH−] = 10−3.35 = 10−4 × 100.65 = 4.47 × 10−4 M. One molecule of Ca(OH)2 furnishes 2OH− ions. Hence concentration of Ca(OH)2 = 4.47 × 10−4/2 = 2.235 × 10−4 M. No. of moles in 250 mL = (2.235 × 10−4)/4 = 5.58 × 10−5.
Teacher's Note: Ca(OH)₂ gives 2 OH⁻, so halve [OH⁻]; 250 mL is one quarter litre.
Exam Note: Divide by 4 for 250 mL, not multiply.
Question Example 36. The pH of 0.1 M hydrocyanic acid solution is 5.2. What is the value of Ka for hydrocyanic acid?
Solution. pH = −log[H+], so log[H+] = −pH = −5.2, or [H+] = 10−5.2 = 10−6 × 100.8 = 6.3 × 10−6 M. Degree of dissociation α = [H+]/C = (6.3 × 10−6)/0.1 = 6.3 × 10−5. According to Ostwald's formula for weak electrolyte, Ka = α2C = 6.3 × 10−5 × 6.3 × 10−5 × 0.1 = 3.97 × 10−10.
Corrected: the book prints the final value as 3.69 × 10−10, but (6.3 × 10−5)2 × 0.1 = 3.97 × 10−10 (also [H+]2/C = (6.3 × 10−6)2/0.1 = 3.97 × 10−10).
Teacher's Note: Ka = [H⁺]²/C for a weak monoprotic acid.
Exam Note: Square 6.3 carefully: 39.7, not 36.9.
Question Example 37. Calculate the pH of the following solutions: (i) 1.0 × 10−8 M HCl, (ii) 1.0 × 10−8 M NaOH
Solution. (i) The neutral water has [H+] = 1 × 10−7 M. By adding 1.0 × 10−8 M HCl, a concentration of 1.0 × 10−8 M H+ ions has increased in solution. Thus, total [H+] = (1 × 10−7 + 1 × 10−8) M = (1 × 10−7 + 0.1 × 10−7) M = 1.1 × 10−7 M. pH = −log(1.1 × 10−7) = −[log 1.1 + log 10−7] = −[0.0414 − 7.0] = 6.9586.
(ii) The neutral water has [OH−] = 1 × 10−7 M. By adding 1.0 × 10−8 M NaOH, a concentration of 1.0 × 10−8 M OH− ions has increased in solution. Thus, total [OH−] = (1 × 10−7 + 1.0 × 10−8) M = 1.1 × 10−7 M. pOH = −log 1.1 × 10−7 = 6.9586; pH = (14 − pOH) = (14 − 6.9586) = 7.0414.
Teacher's Note: At 10⁻⁸ M, water's own 10⁻⁷ M ions cannot be ignored; acid never gives pH 8.
Exam Note: Add water's contribution; never write pH 8 for acid.
Question Example 38. Calculate the S2− ion concentration in a saturated solution (0.1 M) of H2S whose pH was adjusted to 2 by the addition of HCl. (Ka = 1.1 × 10−21)
Solution. H2S ⇌ 2H+ + S2−; Ka = [H+]2[S2−]/[H2S], or [S2−] = Ka[H2S]/[H+]2. pH = 2, so [H+] = 1 × 10−2 M. H2S is a weak electrolyte, so [H2S] = 0.1 M. So [S2−] = (1.1 × 10−21 × 0.1)/(1 × 10−2 × 1 × 10−2) = 1.1 × 10−18 M.
Teacher's Note: Overall Ka for H₂S; [H⁺] fixed by HCl, [H₂S] stays 0.1 M.
Exam Note: Square [H⁺] in the denominator.
Question Example 39. What is the hydrogen ion concentration of 0.1 N CH3COOH solution? The ionisation constant of CH3COOH is 1.8 × 10−5. What is the pH of the solution? (IIT 1993)
Solution. Let the degree of dissociation be α. CH3COOH is a weak electrolyte; thus α2C = Ka, so α2 × 0.1 = 1.8 × 10−5, or α = 1.34 × 10−2. [H+] = α·C = 1.34 × 10−2 × 0.1 = 1.34 × 10−3 M. pH = −log[H+] = −log 1.34 × 10−3 = 2.8729.
Teacher's Note: Weak acid: α = √(Ka/C), then [H⁺] = Cα.
Exam Note: Give both [H⁺] and pH.
Illustrations of Objective Questions (pH)
Question Objective Q19. At 90°C, pure water has [H3O+] = 10−6 M. What is the value of Kw at this temperature? [CBSE (Med.) 2006] (a) 10−6 (b) 10−12 (c) 10−13 (d) 10−14
Solution. Answer: (b). [H3O+] = [OH−] = 10−6 M, so Kw = [H3O+][OH−] = 10−12.
Teacher's Note: Pure water stays neutral at any temperature: [H⁺] = [OH⁻].
Exam Note: Kw rises with temperature; do not use 10⁻¹⁴.
Question Objective Q20. The pH of 0.5 M aqueous solution of HF (Ka = 2 × 10−4) is: (a) 2 (b) 4 (c) 6 (d) 10
Solution. Answer: (a). [H+] = √(CKa) = √(0.5 × 2 × 10−4) = 10−2 M. pH = −log10[H+] = −log 10−2 = 2.
Teacher's Note: Weak acid: [H⁺] = √(C·Ka); 0.5 × 2 = 1.
Exam Note: Quote √(CKa) then pH = 2.
Question Objective Q21. The hydroxyl ion concentration in a solution having pH value 3 will be: (a) 10−11 M (b) 10−7 M (c) 10−3 M (d) 10−14 M
Solution. Answer: (a). pH + pOH = 14, so pOH = 14 − pH = 14 − 3 = 11. [OH−] = 10−pOH = 10−11 M.
Teacher's Note: Acidic solution has tiny [OH⁻]; use pOH = 14 − pH.
Exam Note: Do not answer 10⁻³; that is [H⁺].
Question Objective Q22. A 50 mL solution of pH = 1 is mixed with a 50 mL solution of pH = 2. The pH of the mixture will be nearly: (a) 0.76 (b) 1.26 (c) 1.76 (d) 2.26
Solution. Answer: (b). pH = 1, [H+] = 10−1 M; pH = 2, [H+] = 10−2 M. M1V1 + M2V2 = MR(V1 + V2): 10−1 × 50 + 10−2 × 50 = MR × 100, so MR = 5.5 × 10−2 M. pH = −log 5.5 × 10−2 = 1.26.
Teacher's Note: Average [H⁺] over total volume; never average pH values.
Exam Note: Average of pH 1 and 2 (1.5) is wrong.
Question Objective Q23. The pH of a solution obtained by mixing 50 mL of 0.4 N HCl and 50 mL of 0.2 N NaOH is: (a) −log 2 (b) −log 0.2 (c) 1 (d) 2
Solution. Answer: (c). N1V1(acid) − N2V2(base) = NR(V1 + V2): 0.4 × 50 − 0.2 × 50 = NR × 100, so NR = 0.1. [H+] = 0.1 M; pH = −log[H+] = −log 0.1 = 1.
Teacher's Note: Excess acid: 20 − 10 = 10 meq in 100 mL gives 0.1 N.
Exam Note: Subtract meq, then divide by total volume.
Question Objective Q24. What will be the pH value of 0.05 M Ba(OH)2 solution? [PMT (Raj.) 2006] (a) 12 (b) 13 (c) 1 (d) 12.96
Solution. Answer: (b). Ba(OH)2 → Ba2+ + 2OH− (0.05 M, 2 × 0.05 M = 0.1 M). pOH = −log[OH−] = −log 0.1 = 1; pH = 14 − 1 = 13.
Teacher's Note: Ba(OH)₂ is dihydroxy: [OH⁻] = 2 × 0.05 = 0.1 M.
Exam Note: Forgetting factor 2 gives pH 12.7, a trap.
Question Objective Q25. Equal volumes of three acid solutions of pH 3, 4 and 5 are mixed in a vessel. What will be the H+ ion concentration in the mixture? [CBSE (PMT) 2008] (a) 3.7 × 10−3 M (b) 1.11 × 10−3 M (c) 1.11 × 10−4 M (d) 3.7 × 10−4 M
Solution. Answer: (d). [H+] = 10−3 M, 10−4 M, 10−5 M for the given acids. MmixVmix = M1V1 + M2V2 + M3V3; Mmix × 3 = 10−3 × 1 + 10−4 × 1 + 10−5 × 1, so Mmix = 10−5[100 + 10 + 1]/3 = 111 × 10−5/3 = 37 × 10−5 M = 3.7 × 10−4 M.
Teacher's Note: Equal volumes: mean of the three [H⁺] values, total volume is 3V.
Exam Note: Do not pick 1.11×10⁻³; that is the unaveraged sum.
10.11 Buffer Solutions - Some Solved Examples
Question Example 40. The pH of a buffer is 4.745. When 0.01 mole of NaOH is added to 1 litre of it, the pH changes to 4.832, calculate its buffer capacity.
Solution. From definition, buffer capacity (φ) = ∂b/∂[pH]. ∂(pH) = (4.832 − 4.745) = 0.087; ∂b = 0.01. Substituting given values, φ = 0.01/0.087 = 0.115.
Teacher's Note: Buffer capacity = moles of base added per litre ÷ change in pH.
Exam Note: Write definition φ = ∂b/∂pH, then substitute.
Question Example 41. Suppose it is required to make a buffer solution of pH = 4, using acetic acid and sodium acetate. How much of sodium acetate is to be added to 1 litre of N/10 acetic acid? Dissociation constant of acetic acid = 1.8 × 10−5.
Solution. Applying Henderson's equation, pH = log([Salt]/[Acid]) − log Ka. 4 = log[Salt] − log(0.1) − log(1.8 × 10−5). So log[Salt] = (4 − 1 − 5 + 0.2552) = 2̄.2552 (that is, −1.7448). [Salt] = 0.018 g mol L−1. The molecular mass of CH3COONa = 82. Amount of salt = 0.018 × 82 = 1.476 g.
Teacher's Note: Rearrange Henderson: log[Salt] = pH − pKa + log[Acid].
Exam Note: Convert moles to grams using M = 82.
Question Example 42. What is the pH of the solution when 0.2 mole of hydrochloric acid is added to one litre of a solution containing 1 M acetic acid and acetate ion? Assume that the total volume is one litre. (Ka for CH3COOH = 1.8 × 10−5)
Solution. On adding HCl, the free hydrogen ions will combine with CH3COO− ions to form CH3COOH. Thus, the concentration of acetic acid increases while that of CH3COO− ions decreases. [CH3COOH] = (0.2 + 1) = 1.2 mol litre−1; [Salt] = (1 − 0.2) = 0.8 mol litre−1.
Applying Henderson's equation, pH = log([Salt]/[Acid]) − log Ka = log(0.8/1.2) − log 1.8 × 10−5 = log 2 − log 3 − log 1.8 × 10−5 = 4.5687 (≈ 4.57).
Teacher's Note: Strong acid converts acetate to acetic acid: salt falls 0.2, acid rises 0.2.
Exam Note: Update both buffer components before using Henderson.
Question Example 43. 20 mL of 0.2 M sodium hydroxide is added to 50 mL of 0.2 M acetic acid to give 70 mL of the solution. What is the pH of this solution? Calculate the additional volume of 0.2 M NaOH required to make the pH of solution 4.74. The ionisation constant of acetic acid is 1.8 × 10−5.
Solution. No. of moles of NaOH in 20 mL = (0.2/1000) × 20 = 0.004. No. of moles of acetic acid in 50 mL = (0.2/1000) × 50 = 0.01. When NaOH is added, CH3COONa is formed: CH3COOH + NaOH ⇌ CH3COONa + H2O. No. of moles of CH3COONa in 70 mL solution = 0.004; no. of moles of CH3COOH in 70 mL solution = (0.01 − 0.004) = 0.006.
Henderson's equation: pH = log(0.004/0.006) − log 1.8 × 10−5 = 4.5687.
On further addition of NaOH, the pH becomes 4.74: pH = log([Salt]/[Acid]) − log 1.8 × 10−5, so log([Salt]/[Acid]) = pH + log 1.8 × 10−5 = (4.74 − 4.7448) = −0.0048 = 1̄.9952, and [Salt]/[Acid] = 0.9891. Let x moles of NaOH be added: [Salt] = (0.004 + x) mole, [Acid] = (0.006 − x) mole. (0.004 + x)/(0.006 − x) = 0.9891, or 0.004 + x = 0.9891 × 0.006 − 0.9891x, x = 0.000972 mole. Volume of 0.2 M NaOH solution having 0.000972 mole = (1000/0.2) × 0.000972 = 4.86 mL.
Teacher's Note: Moles, not concentrations: NaOH converts acid to salt one-to-one.
Exam Note: Give pH first, then extra volume in mL.
Question Example 44. Calculate the pH of the buffer solution containing 0.15 mole of NH4OH and 0.25 mole of NH4Cl. Kb for NH4OH is 1.98 × 10−5.
Solution. Applying the equation, pOH = log([Salt]/[Base]) − log Kb = log(0.25/0.15) − log Kb.
Corrected: the book substitutes Kb = 1.8 × 10−5 (not the given 1.98 × 10−5) and prints pOH = 4.966, pH = 9.034. With the given Kb = 1.98 × 10−5: pOH = 0.2218 + 4.7033 = 4.925, so pH = 14 − 4.925 = 9.07. (With 1.8 × 10−5 the book value 9.034 follows; the answer is about 9 either way.)
Teacher's Note: Basic buffer: pOH = pKb + log[Salt]/[Base], then pH = 14 − pOH.
Exam Note: Use the Kb given in the question.
Question Example 45. What volume of 0.10 M sodium formate should be added to 50 mL of 0.05 M formic acid to produce a buffer solution of pH 4.0? pKa for formic acid is 3.80. (IIT 1990)
Solution. Let x mL of 0.10 M sodium formate be added. No. of moles in x mL of 0.10 M sodium formate = (0.10/1000) × x. No. of moles in 50 mL of 0.05 M formic acid = (0.05/1000) × 50. [Sod. formate]/[Formic acid] = (0.10x/1000)/(0.05 × 50/1000) = 0.10x/2.5 = 0.04x.
Applying the equation, pH = log([Salt]/[Acid]) + pKa: 4.0 = log 0.04x + 3.8, so x = 39.6 mL.
Teacher's Note: Volumes cancel in the ratio; only moles of salt and acid matter.
Exam Note: Solve log(0.04x) = 0.2 correctly: 10^0.2 = 1.585.
Question Example 46. How many gram moles of HCl will be added to prepare one litre of a buffer solution (containing NaCN and HCN) of pH 8.5 using 0.01 g formula mass of NaCN? Ka for HCN = 4.1 × 10−10.
Solution. Let a mole of HCl be added. It will combine with NaCN to form HCN: NaCN + HCl → NaCl + HCN (a, a, a). [NaCN] = (0.01 − a), [HCN] = a. Applying the equation, pH = log([NaCN]/[HCN]) − log Ka: 8.5 = log((0.01 − a)/a) − log 4.1 × 10−10. So log((0.01 − a)/a) = 8.5 + 0.6127 − 10.0 = 1̄.1127; (0.01 − a)/a = 0.1296, or a = 0.01/1.1296 = 0.0089 mole.
Teacher's Note: HCl converts NaCN to HCN one-to-one: salt 0.01 − a, acid a.
Exam Note: Express both components in a, then solve ratio.
Illustrations of Objective Questions (Buffer Solutions)
Question Objective Q26. The pH of a solution that is 0.1 M NaA and 0.1 M HA (Ka = 1 × 10−6) would be: (a) 5 (b) 6 (c) 3 (d) 7
Solution. Answer: (b). pH = pKa + log([Salt]/[Acid]) = −log Ka + log([Salt]/[Acid]) = −log 10−6 + log(0.1/0.1) = 6.
Teacher's Note: Equal salt and acid gives pH = pKa.
Exam Note: State [Salt]/[Acid] = 1 explicitly.
Question Objective Q27. pKa for acetic acid is 4.74. What should be the ratio of concentrations of acetic acid and acetate ions to have a solution with pH 5.74? (a) 1:10 (b) 10:1 (c) 1:1 (d) 2:1
Solution. Answer: (a). pH = pKa + log([Acetate ion]/[Acetic acid]); 5.74 = 4.74 + log([Acetate ion]/[Acetic acid]), so [Acetate]/[Acid] = 10 and [Acetic acid]:[Acetate] = 1:10.
Teacher's Note: pH one unit above pKa means salt:acid = 10:1.
Exam Note: Question asks acid:acetate, so answer 1:10.
Question Objective Q28. What is the pH of the buffer solution containing 0.15 mol of NH4OH and 0.25 mol of NH4Cl? Kb for NH4OH is 1.98 × 10−5: (a) 10 (b) 9 (c) 9.2 (d) 10.2
Solution. Answer: (b). 14 − pH = pKb + log([Salt]/[Base]) = −log(1.98 × 10−5) + log(0.25/0.15), so pH ≈ 9 (precisely 9.07).
Teacher's Note: Basic buffer: pOH = pKb + log[Salt]/[Base].
Exam Note: Nearest option to 9.07 is 9.
Question Objective Q29. The pH of a buffer solution of 0.1 M CH3COOH and 0.1 M CH3COONa is ......... (pKa = 4.745). (a) 4.745 (b) 3.745 (c) 5.745 (d) 3.255
Solution. Answer: (a). pH = pKa + log([CH3COONa]/[CH3COOH]) = 4.745 + log(0.1/0.1) = 4.745.
Teacher's Note: Equal concentrations of weak acid and its salt: pH = pKa.
Exam Note: Log of 1 is zero; state it.
Question Objective Q30. The pH of a buffer solution prepared by adding 10 mL of 0.1 M CH3COOH and 20 mL of 0.1 M sodium acetate will be: (Given: pKa of CH3COOH = 4.74) (a) 4.05 (b) 3.04 (c) 5.04 (d) 3.05
Solution. Answer: (c). Number of moles of CH3COOH = MV/1000 = 0.1 × 10/1000 = 0.001; number of moles of CH3COONa = 0.1 × 20/1000 = 0.002. pH = pKa + log([Salt]/[Acid]) = 4.74 + log(0.002/0.001) = 5.04.
Teacher's Note: Use moles from volume × molarity; log 2 = 0.30.
Exam Note: pH = 4.74 + 0.30 = 5.04.
Question Objective Q31. 40 mL of 0.1 M ammonium hydroxide is mixed with 20 mL of 0.1 M HCl. What is the pH of the mixture? (pKb of ammonia solution is 4.74.) (AIIMS 2006) (a) 4.74 (b) 2.26 (c) 9.26 (d) 5
Solution. Answer: (c). Since ammonium hydroxide is 50% neutralised, [Salt] = [Base]. pOH = pKb + log10([Salt]/[Base]) = 4.74 + log10 1 = 4.74. pH = 14 − 4.74 = 9.26.
Teacher's Note: HCl is half the base moles, so salt equals leftover base.
Exam Note: Remember pH = 14 − pOH, not pOH.
Question Objective Q32. The pKa of a weak acid (HA) is 4.5. The pOH of an aqueous buffered solution of HA, in which 50% of the acid is ionised, is: (AIEEE 2007) (a) 7.0 (b) 4.5 (c) 2.5 (d) 9.5
Solution. Answer: (d). pH = pKa + log10([A−]/[HA]). Since acid is 50% ionised, [A−] = [HA], so pH = pKa + log 1 = 4.5. pOH = 14 − 4.5 = 9.5.
Teacher's Note: 50% ionised means [A⁻] = [HA], so pH = pKa.
Exam Note: Question asks pOH, not pH.
Question Objective Q33. pKa value of acetic acid is 4.75. If the buffer solution contains 0.125 M acetic acid and 0.25 M sodium acetate, the pH of buffer solution is: (Comed (Karnataka) 2008) (a) 5.05 (b) 5.5 (c) 4.9 (d) 5.75
Solution. Answer: (a). pH = pKa + log([Salt]/[Acid]) = 4.75 + log(0.25/0.125) = 5.05.
Teacher's Note: Ratio 2:1 adds log 2 = 0.30 to pKa.
Exam Note: Show ratio 0.25/0.125 = 2.
10.6 Relative Strength of Acids - Example
Question Example 47. The dissociation constants for HCOOH and CH3COOH are 2.1 × 10−4 and 1.8 × 10−5 respectively. Calculate the relative strengths of the acids.
Solution. The strength of the acid is directly proportional to the square root of the dissociation constant: strength of the acid ∝ √(dissociation constant). Hence strength of HCOOH/strength of CH3COOH = √(KHCOOH/KCH3COOH) = √(2.1 × 10−4/1.8 × 10−5) = 3.415.
Teacher's Note: For equimolar solutions, α ∝ √Ka, so strengths compare as √Ka ratio.
Exam Note: Take the square root of the Ka ratio.
Download OP Tandon Solutions for JEE Math PDF
Download OP Tandon Solutions for JEE
Review detailed solutions for JEE Mathematics. The OP Tandon Solutions Physical Chemistry IIT JEE Chapter 10 Ionic Equilibrium Part 1 PDF provides comprehensive answers mapped to standard OP Tandon Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Concept-Driven Math Answers
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
In addition to these OP Tandon Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.