OP Tandon Solutions Physical Chemistry IIT JEE Chapter 1 Basic Principles Part 1

Official OP Tandon Textbook Solutions: JEE Chemistry Chapter 01 Basic Principles

Explore reliable textbook solutions for Chapter 01 Basic Principles tailored for JEE learners using OP Tandon methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Chapter-wise Solutions for Chemistry: Chapter 01 Basic Principles

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chapter 1 Basic Principles - Part 1 (pages 1-31)

Matter and Energy

Question Example 1. Calculate the amount of energy released in ergs, calories and in joules when 0.001 kg of mass disappears. [Given, velocity of light = 3 × 108 m s−1]

Solution. According to Einstein equation, E = mc2
m = 0.001 kg = 1 × 10−3 kg; c = 3 × 108 m s−1
E = (1 × 10−3)(3 × 108)2 = 9 × 1013 J
1 J = 107 erg = 0.24 cal
9 × 1013 J = 9 × 1013 × 107 erg = 9 × 1020 erg
9 × 1013 J = 9 × 1013 × 0.24 cal = 2.16 × 1013 cal

Teacher's Note: Use E = mc² with m in kg and c in m/s to get joules, then convert units.

Exam Note: Convert 1 J = 10⁷ erg = 0.24 cal carefully.

Mixtures

Question Example 2. How will you separate the following mixtures? (a) Sulphur, potassium nitrate and charcoal, (b) Sand, common salt, iron filings and naphthalene, (c) Powdered glass, ammonium chloride and potassium chloride.

Solution. (a) (i) Sulphur is soluble in carbon disulphide, (ii) potassium nitrate is soluble in water, (iii) charcoal is insoluble in carbon disulphide as well as in water.
Stir the mixture with CS2 and filter. Filtrate (solution of sulphur in CS2) on evaporation gives sulphur. The residue is shaken with water and filtered: the filtrate on evaporation to dryness gives potassium nitrate, and the residue on drying is charcoal.
(b) (i) Iron filings are separated by a magnet, (ii) naphthalene sublimes on heating, (iii) sand is insoluble in water.
Move a magnet through the mixture: iron filings are attracted. Heat the residue: vapours on cooling give naphthalene. The residue (common salt + sand) is shaken with water and filtered: the filtrate evaporated to dryness gives common salt and the residue dried is sand.
(c) (i) Ammonium chloride sublimes on heating, (ii) potassium chloride is soluble in water, (iii) powdered glass is insoluble in water.
Heat the mixture: ammonium chloride sublimes and is collected on cooling. Shake the residue with water and filter: powdered glass remains on the filter paper; the filtrate on evaporation gives potassium chloride.

Teacher's Note: Order the steps by property: magnet, sublimation, then solubility in a solvent, then filtration.

Exam Note: Name the property exploited at each step.

Laws of Chemical Combination

Question Example (law of conservation of mass). 1.70 g of silver nitrate dissolved in 100 g of water is taken. 0.585 g of sodium chloride dissolved in 100 g of water is added to it and chemical reaction occurs. 1.435 g of silver chloride and 0.85 g of sodium nitrate are formed. Show that the law of conservation of mass is obeyed.

Solution. Total masses before chemical change = mass of AgNO3 + mass of NaCl + mass of water = 1.70 g + 0.585 g + 200.0 g = 202.285 g
Total masses after the chemical reaction = mass of AgCl + mass of NaNO3 + mass of water = 1.435 g + 0.85 g + 200.0 g = 202.285 g
Thus, in this chemical change, total masses of reactants = total masses of products.

Teacher's Note: Add all masses, including the solvent water, on both sides.

Exam Note: Do not forget the 200 g of water.

Question Example 3. What mass of sodium chloride would be decomposed by 9.8 g of sulphuric acid, if 12 g of sodium bisulphate and 2.75 g of hydrogen chloride were produced in a reaction assuming that the law of conservation of mass is true?

Solution. NaCl + H2SO4 = NaHSO4 + HCl
According to law of conservation of mass, total masses of reactants = total masses of products.
Let the mass of NaCl decomposed be x g, so
x + 9.8 = 12.0 + 2.75 = 14.75
x = 4.95 g

Teacher's Note: Mass reactants = mass products; solve the single unknown.

Exam Note: Write the balanced equation, then equate total masses.

Question Example 4. In an experiment, 2.4 g of iron oxide on reduction with hydrogen yield 1.68 g of iron. In another experiment, 2.9 g of iron oxide give 2.03 g of iron on reduction with hydrogen. Show that the above data illustrate the law of constant proportions.

Solution. In the first experiment
Mass of iron oxide = 2.4 g; mass of iron after reduction = 1.68 g
Mass of oxygen = mass of iron oxide − mass of iron = (2.4 − 1.68) = 0.72 g
Ratio of oxygen and iron = 0.72 : 1.68 = 1 : 2.33
In the second experiment
Mass of iron oxide = 2.9 g; mass of iron after reduction = 2.03 g
Mass of oxygen = (2.9 − 2.03) = 0.87 g
Ratio of oxygen and iron = 0.87 : 2.03 = 1 : 2.33
Thus, the data illustrate the law of constant proportions, as in both the experiments the ratio of oxygen and iron is the same.

Teacher's Note: Find oxygen by difference, then compare the O : Fe ratio in both samples.

Exam Note: Show both ratios explicitly, then state the law.

Question Example 5. Carbon combines with hydrogen to form three compounds A, B and C. The percentages of hydrogen in A, B and C are 25, 14.3 and 7.7 respectively. Which law of chemical combination is illustrated?

Solution.
Compound% of Hydrogen% of Carbon
A25.0(100 − 25.0) = 75.0
B14.3(100 − 14.3) = 85.7
C7.7(100 − 7.7) = 92.3
In compound A: 25 parts of hydrogen combine with 75 parts of carbon, so 1 part of hydrogen combines with 75/25 = 3 parts of carbon.
In compound B: 14.3 parts of hydrogen combine with 85.7 parts of carbon, so 1 part of hydrogen combines with 85.7/14.3 = 6.0 parts of carbon.
In compound C: 7.7 parts of hydrogen combine with 92.3 parts of carbon, so 1 part of hydrogen combines with 92.3/7.7 = 12.0 parts of carbon.
Thus, the masses of carbon in three compounds A, B and C, which combine with a fixed mass of hydrogen are in the ratio of 3 : 6 : 12 or 1 : 2 : 4. This is a simple ratio. Hence, the data illustrate the law of multiple proportions.

Teacher's Note: Fix the mass of one element (1 g H) and compare the other: a simple ratio means multiple proportions.

Exam Note: Fix one element at 1 part; quote the simple whole-number ratio.

Question Example 6. Two compounds each containing only tin and oxygen had the following composition: Compound A: 78.77% tin, 21.23% oxygen; Compound B: 88.12% tin, 11.88% oxygen. Show how this data illustrate the law of multiple proportions?

Solution. In compound A: 21.23 parts of oxygen combine with 78.77 parts of tin; 1 part of oxygen combines with 78.77/21.23 = 3.7 parts of tin.
In compound B: 11.88 parts of oxygen combine with 88.12 parts of tin; 1 part of oxygen combines with 88.12/11.88 = 7.4 parts of tin.
Thus, the mass of tin in compounds A and B which combine with a fixed mass of oxygen are in the ratio of 3.7 : 7.4 or 1 : 2. This is a simple ratio. Hence, the data illustrate the law of multiple proportions.

Teacher's Note: Compute tin per 1 part oxygen in each compound; 3.7 : 7.4 reduces to 1 : 2.

Exam Note: State the fixed mass, the ratio, and the law name.

Question Example 7. Illustrate the law of reciprocal proportions from the following data: KCl contains 52.0% potassium, KI contains 23.6% potassium and ICl contains 78.2% iodine.

Solution. In KCl: potassium 52.0%, chlorine (100 − 52) = 48%.
In KI: potassium 23.6%, iodine (100 − 23.6) = 76.4%.
23.6 parts of potassium combine with 76.4 parts of iodine; 52.0 parts of potassium will combine with (76.4/23.6) × 52.0 = 168.3 parts of iodine.
The ratio of masses of chlorine and iodine which combine with same mass of potassium = 48 : 168.3 or 1 : 3.5
In ICl: iodine = 78.2% and chlorine = (100 − 78.2) = 21.8%. The ratio of Cl : I = 21.8 : 78.2 = 1 : 3.5 (more exactly 1 : 3.59).
Hence, the data illustrate the law of reciprocal proportions.

Teacher's Note: Compare the Cl : I ratio via potassium with the direct Cl : I ratio in ICl.

Exam Note: Both ratios must agree (here about 1 : 3.5).

Some Solved Examples

Question Example 8. Zinc sulphate crystals contain 22.6% of zinc and 43.9% of water. Assuming the law of constant proportions to be true, how much zinc should be used to produce 13.7 g of zinc sulphate and how much water will they contain?

Solution. 100 g of zinc sulphate crystals are obtained from 22.6 g zinc.
13.7 g of zinc sulphate crystals will be obtained from (22.6/100) × 13.7 = 3.0962 g of zinc.
100 g of zinc sulphate crystals contain water = 43.9 g
13.7 g of zinc sulphate crystals shall contain water = (43.9/100) × 13.7 = 6.0143 g

Teacher's Note: Constant composition lets you scale percentages directly to the given mass.

Exam Note: Percentage × given mass; give both answers with units.

Question Example 9. Carbon monoxide reacts with oxygen to form carbon dioxide according to the equation, 2CO + O2 = 2CO2. In an experiment, 400 mL of carbon monoxide and 180 mL of oxygen were allowed to react, when 80% of carbon monoxide was transformed to carbon dioxide. All the volumes were measured under the same conditions of temperature and pressure. Find out the composition of the final mixture.

Solution. 2CO + O2 = 2CO2 (2 vol, 1 vol, 2 vol)
From the equation, volume of oxygen required for the transformation of carbon monoxide into carbon dioxide is half the volume of carbon monoxide and the volume of carbon dioxide produced is same as that of carbon monoxide.
Volume of CO transformed = (80 × 400)/100 = 320 mL
Volume of oxygen required = ½ × 320 = 160 mL
Volume of CO2 produced = 320 mL
Composition of final mixture: CO = (400 − 320) = 80 mL; CO2 = 320 mL; O2 = 180 − 160 = 20 mL

Teacher's Note: Use Gay-Lussac volume ratios 2 : 1 : 2 and subtract used volumes from the initial ones.

Exam Note: Include leftover O₂ and unreacted CO in the final mixture.

Question Example 10. How much volume of oxygen will be required for complete combustion of 40 mL of acetylene (C2H2) and how much volume of carbon dioxide will be formed? All volumes are measured at NTP.

Solution. 2C2H2 + 5O2 = 4CO2 + 2H2O
2 vol : 5 vol : 4 vol
40 mL of C2H2 needs (5/2) × 40 = 100 mL of O2 and forms (4/2) × 40 = 80 mL of CO2.
So, for complete combustion of 40 mL of acetylene, 100 mL of oxygen are required and 80 mL of carbon dioxide is formed.

Teacher's Note: Balance the equation first; gas volumes react in the stoichiometric mole ratio.

Exam Note: Balance first; volumes scale as coefficients.

Atomic Mass and Molecular Mass

Question Example 11. Boron has two isotopes boron-10 and boron-11 whose percentage abundances are 19.6% and 80.4% respectively. What is the average atomic mass of boron?

Solution. Contribution of boron-10 = 10.0 × 0.196 = 1.96 amu
Contribution of boron-11 = 11.0 × 0.804 = 8.844 amu
Adding both = 1.96 + 8.844 = 10.804 amu
Thus, the average atomic mass of boron is 10.804 amu.

Teacher's Note: Average atomic mass = sum of (isotopic mass × fractional abundance).

Exam Note: Convert percentages to fractions before multiplying.

Question Example 12. Carbon occurs in nature as a mixture of carbon-12 and carbon-13. The average atomic mass of carbon is 12.011. What is the percentage abundance of carbon-12 in nature?

Solution. Let x be the percentage abundance of carbon-12; then (100 − x) will be the percentage abundance of carbon-13.
Therefore, 12x/100 + 13(100 − x)/100 = 12.011
or 12x + 1300 − 13x = 1201.1
or x = 98.9
Abundance of carbon-12 is 98.9%.

Teacher's Note: Set up weighted average with x and (100 − x), then solve the linear equation.

Exam Note: Check that the two abundances add to 100.

Gram Atom and Gram Molecule

Question Example 13. Calculate the mass of 2.5 gram atoms of oxygen.

Solution. No. of gram atoms = (mass of the element in grams)/(atomic mass of the element in grams)
So, mass of oxygen = 2.5 × 16 = 40.0 g
Corrected: the book prints 2.5 × 32 = 80.0 g, which uses the molecular mass of O2; one gram atom of oxygen is 16 g, so the correct answer is 40.0 g.

Teacher's Note: A gram atom uses atomic mass (16 g for O), not molecular mass (32 g).

Exam Note: Atom versus molecule mass is the classic trap.

Question Example 14. Calculate the gram atoms in 2.3 g of sodium.

Solution. No. of gram atoms = 2.3/23 = 0.1 [atomic mass of sodium = 23 g]

Teacher's Note: Gram atoms = mass divided by atomic mass.

Exam Note: State the atomic mass you use.

Question Example 15. Calculate the mass of 1.5 gram molecule of sulphuric acid.

Solution. Molecular mass of H2SO4 = 2 × 1 + 32 + 4 × 16 = 98.0 amu
Gram-molecular mass of H2SO4 = 98.0 g
Mass of 1.5 gram molecule of H2SO4 = 98.0 × 1.5 = 147.0 g

Teacher's Note: Gram molecules × molar mass gives mass in grams.

Exam Note: Add atomic masses first; show the multiplication.

Question Example 16. Calculate the actual mass of one molecule of carbon dioxide (CO2).

Solution. Molecular mass of CO2 = 44 amu; 1 amu = 1.66 × 10−24 g
So, the actual mass of CO2 = 44 × 1.66 × 10−24 = 7.304 × 10−23 g

Teacher's Note: Actual mass of one molecule = molecular mass in amu × 1.66 × 10⁻²⁴ g.

Exam Note: Quote the unit as grams per molecule.

Some Solved Examples (Mole Concept)

Question Example 17. A piece of copper weighs 0.635 g. How many atoms of copper does it contain? [CEE (Bihar) 1992]

Solution. Gram-atomic mass of copper = 63.5 g
Number of moles in 0.635 g of copper = 0.635/63.5 = 0.01
Number of copper atoms in one mole = 6.02 × 1023
Number of copper atoms in 0.01 mole = 0.01 × 6.02 × 1023 = 6.02 × 1021

Teacher's Note: Atoms = (mass / atomic mass) × Avogadro number.

Exam Note: Moles first, then multiply by 6.02 × 10²³.

Question Example 18. How many molecules of water and oxygen atoms are present in 0.9 g of water?

Solution. Gram-molecular mass of water = 18 g
Number of moles in 0.9 g of water = 0.9/18 = 0.05
Number of water molecules in one mole of water = 6.02 × 1023
Number of molecules of water in 0.05 mole = 0.05 × 6.02 × 1023 = 3.010 × 1022
As one molecule of water contains one oxygen atom, number of oxygen atoms in 3.010 × 1022 molecules of water = 3.010 × 1022

Teacher's Note: Each H₂O molecule holds exactly one O atom, so O atoms equal molecules.

Exam Note: Answer both parts: molecules and oxygen atoms.

Question Example 19. Calculate the mass of a single atom of sulphur and a single molecule of carbon dioxide.

Solution. Gram-atomic mass of sulphur = 32 g
Mass of one sulphur atom = 32/(6.02 × 1023) = 5.32 × 10−23 g
Molecular mass of CO2 = 12 + 2 × 16 = 44; gram-molecular mass = 44 g
Mass of one molecule of CO2 = 44/(6.02 × 1023) = 7.31 × 10−23 g
Corrected: the book prints 5.33 × 10−23 g and 7.308 × 10−23 g; recalculation gives 32/6.02 = 5.32 and 44/6.02 = 7.31 (× 10−23 g).

Teacher's Note: Mass of one particle = molar mass divided by Avogadro number.

Exam Note: Divide carefully; arithmetic slips lose the answer mark.

Question Example 20. What is the mass of 3.01 × 1022 molecules of ammonia?

Solution. Gram-molecular mass of ammonia = 17 g
Number of molecules in 17 g (one mole) of NH3 = 6.02 × 1023
Let the mass of 3.01 × 1022 molecules of NH3 be x g.
(3.01 × 1022)/(6.02 × 1023) = x/17
x = 17 × 3.01 × 1022/(6.02 × 1023) = 0.85 g

Teacher's Note: 3.01 × 10²² is 0.05 mole, so mass is 0.05 × 17.

Exam Note: Use proportion or moles; both give 0.85 g.

Question Example 21. From 200 mg of CO2, 1021 molecules are removed. How many moles of CO2 are left?

Solution. Gram-molecular mass of CO2 = 44 g
Mass of 1021 molecules of CO2 = (44/(6.02 × 1023)) × 1021 = 0.073 g
Mass of CO2 left = (0.2 − 0.073) = 0.127 g
Number of moles of CO2 left = 0.127/44 = 2.88 × 10−3

Teacher's Note: Convert mg to g, subtract removed mass, then divide by 44.

Exam Note: Convert 200 mg to 0.2 g before subtracting.

Question Example 22. How many molecules and atoms of oxygen are present in 5.6 litres of oxygen (O2) at NTP?

Solution. 22.4 litres of oxygen at NTP contain 6.02 × 1023 molecules of oxygen.
So, 5.6 litres of oxygen at NTP contain (5.6/22.4) × 6.02 × 1023 = 1.505 × 1023 molecules
1 molecule of oxygen contains 2 atoms, so 1.505 × 1023 molecules contain 2 × 1.505 × 1023 = 3.01 × 1023 atoms

Teacher's Note: 5.6 L is a quarter of 22.4 L; O₂ is diatomic.

Exam Note: Do not stop at molecules; double for atoms.

Question Example 23. How many electrons are present in 1.6 g of methane?

Solution. Gram-molecular mass of methane (CH4) = 12 + 4 = 16 g
Number of moles in 1.6 g of methane = 1.6/16 = 0.1
Number of molecules in 0.1 mole = 0.1 × 6.02 × 1023 = 6.02 × 1022
One molecule of methane has 6 + 4 = 10 electrons.
So, 6.02 × 1022 molecules of methane have 10 × 6.02 × 1022 = 6.02 × 1023 electrons

Teacher's Note: Electrons per CH₄ molecule = 6 (C) + 4 (H) = 10.

Exam Note: Count electrons per molecule, then multiply.

Question Example 24. The electric charge on the electron is 1.602 × 10−19 coulomb. How much charge is present on 0.1 mole of Cu2+ ions?

Solution. Charge on one mole of electrons = 6.02 × 1023 × 1.602 × 10−19 coulomb = 96500 coulomb = 1 faraday
Charge on one mole of Cu2+ ions = 2 × 96500 coulomb = 2 faraday
Charge on 0.1 mole of Cu2+ ions = 0.1 × 2 = 0.2 faraday

Teacher's Note: Cu²⁺ carries two electron charges, so one mole carries 2 F.

Exam Note: Remember the ionic charge factor 2.

Question Example 25. How many years it would take to spend one Avogadro's number of rupees at a rate of 10 lakh of rupees in one second? (MLNR 1990)

Solution. Number of rupees spent in one second = 106
Number of rupees spent in one year = 106 × 60 × 60 × 24 × 365
Avogadro's number of rupees will be spent in 6.02 × 1023/(106 × 60 × 60 × 24 × 365) = 19.089 × 109 years = 1.9089 × 1010 years

Teacher's Note: Convert the rate to rupees per year, then divide Avogadro number by it.

Exam Note: 10 lakh = 10⁶; use 365 days.

Illustrations of Objective Questions

Question Illustration 1. 116 mg of a compound on vaporisation in Victor Meyer's apparatus displaces 44.8 mL of air measured at STP. The molecular mass of the compound is: (a) 116 (b) 232 (c) 58 (d) 44.8 (e) 46.4 [CEE Kerala 2004]

Solution. Answer: (c) 58. Molar mass of compound = mass at 22400 mL vapour at STP = (0.116 × 22400)/44.8 = 58

Teacher's Note: Mass per 22400 mL of vapour at STP gives the molar mass.

Exam Note: Convert 116 mg to 0.116 g first.

Question Illustration 2. A gas has a vapour density 11.2. The volume occupied by 1 g of the gas at NTP is: (a) 1 L (b) 11.2 L (c) 22.4 L (d) 4 L [JCECE 2004]

Solution. Answer: (a) 1 L. Molar mass = 2 × 11.2 = 22.4 g; volume of 1 g of compound at STP = 22.4/22.4 = 1 L

Teacher's Note: Molar mass = 2 × vapour density = 22.4 g, so 1 g occupies 1 L.

Exam Note: Use M = 2 × V.D.

Question Illustration 3. 3 g of hydrocarbon on combustion with 11.2 g of oxygen produce 8.8 g of CO2 and 5.4 g of H2O. The data illustrate the law of: (a) conservation of mass (b) multiple proportions (c) constant proportions (d) reciprocal proportions

Solution. Answer: (a). Σ masses of reactants = Σ masses of products: (3 + 11.2) g = 14.2 g and (8.8 + 5.4) g = 14.2 g. Hence, law of conservation of mass is verified.

Teacher's Note: Equal total mass before and after points to conservation of mass.

Exam Note: Add both sides before choosing the law.

Question Illustration 4. The maximum number of molecules is present in: (a) 15 L of H2 gas at STP (b) 5 L of N2 gas at STP (c) 0.5 g of H2 gas (d) 10 g of O2 gas [CBSE (PMT) 2004; Manipal (Medical) 2007]

Solution. Answer: (a). Number of molecules in 15 L H2 = (15/22.4) × N = 0.669 N; in 5 L N2 = (5/22.4) × N = 0.223 N; in 0.5 g H2 = (0.5/2) × N = 0.25 N; in 10 g O2 = (10/32) × N = 0.312 N. The maximum is in (a).

Teacher's Note: Convert every option to moles; molecules are proportional to moles.

Exam Note: Compare moles, not raw volumes or masses.

Question Illustration 5. Insulin contains 3.4% sulphur. Then, the minimum molecular mass of the insulin is about: (a) 940 amu (b) 9400 amu (c) 3600 amu (d) 970 amu

Solution. Answer: (a) 940 amu. 3.4 g sulphur is present in 100 g insulin, so 32 g sulphur will be present in (100/3.4) × 32 g insulin = 940 g. Molar mass of insulin is about 940 amu.

Teacher's Note: Minimum molar mass assumes one S atom (32) per molecule.

Exam Note: Assume one sulphur atom for the minimum.

Question Illustration 6. 25 g of MCl4 contains 0.5 mol chlorine then its molecular mass is: (a) 100 g mol−1 (b) 200 g mol−1 (c) 150 g mol−1 (d) 400 g mol−1 [DPMT 2007]

Solution. Answer: (b) 200 g mol−1. 1 mol of MCl4 contains 4 mol of chlorine. 0.5 mol chlorine is present in 25 g of MCl4, so 4 mol chlorine will be present in (25/0.5) × 4 = 200 g of MCl4.

Teacher's Note: One mole of MCl₄ contains 4 mol Cl; scale the 25 g up by 4/0.5.

Exam Note: Link moles of Cl to moles of compound.

Equivalent Masses (Illustrations of Objective Questions)

Question Illustration 7. An unknown element forms an oxide. What will be the equivalent mass of the element if the oxygen content is 20% by mass: (a) 16 (b) 32 (c) 8 (d) 64 [JEE (WB) 2008]

Solution. Answer: (b) 32. Equivalent mass of element = (mass of element/mass of oxygen) × 8 = (80/20) × 8 = 32

Teacher's Note: Equivalent mass = (mass of element per mass of oxygen) × 8.

Exam Note: Metal is 80 g per 20 g oxygen.

Question Illustration 8. A metal M of equivalent mass E forms an oxide of molecular formula MxOy. The atomic mass of the metal is given by the correct equation: (a) 2E(y/x) (b) xyE (c) E/y (d) y/E (e) (E/2) × (x/y) [PMT (Kerala) 2008]

Solution. Answer: (a). Let atomic mass of metal M be a. Mass of metal = a × x; mass of oxygen = 16 × y.
Equivalent mass E = (mass of element/mass of oxygen) × 8 = (ax/16y) × 8
a = 2E(y/x)

Teacher's Note: Take x atoms of M against y atoms of O (16y) in E = (mass M/mass O) × 8.

Exam Note: Write masses in terms of a, x, y before simplifying.

Question Illustration 9. The percentage of an element M is 53 in its oxide of molecular formula M2O3. Its atomic mass is about: (a) 45 (b) 9 (c) 18 (d) 38 (e) 27 [PET (Kerala) 2008]

Solution. Answer: (e) 27. Equivalent mass of element = (mass of element/mass of oxygen) × 8 = (53/47) × 8 ≈ 9
Atomic mass = equivalent mass × valency = 9 × 3 = 27 amu.

Teacher's Note: Find equivalent mass from percentage, then multiply by valency 3 from M₂O₃.

Exam Note: Valency comes from the formula M₂O₃.

Question Illustration 10. The equivalent weight of a metal is double that of oxygen. How many times is the weight of its oxide greater than the weight of metal? (a) 4 (b) 2 (c) 3 (d) 1.5

Solution. Answer: (d) 1.5. Equivalent mass of metal = 16 = x/n, where x = atomic mass of metal and n = valency of metal. Molecular formula of metal oxide = M2On.
(Mass of metal oxide)/(mass of metal) = [2(16n) + 16(n)]/[2(16n)] = 1.5

Teacher's Note: Equivalent mass 16 gives x = 16n; compare oxide mass with metal mass.

Exam Note: The valency n cancels out of the ratio.

Methods for the Determination of Atomic Mass

Question Example 26. A chloride of an element contains 49.5% chlorine. The specific heat of the element is 0.056. Calculate the equivalent mass, valency and atomic mass of the element.

Solution. Mass of chlorine in the metal chloride = 49.5%; mass of metal = (100 − 49.5) = 50.5
Equivalent mass of the metal = (mass of metal/mass of chlorine) × 35.5 = (50.5/49.5) × 35.5 = 36.21
According to Dulong and Petit's law, approximate atomic mass of the metal = 6.4/specific heat = 6.4/0.056 = 114.3
Valency = approximate atomic mass/equivalent mass = 114.3/36.21 = 3.1 ≈ 3
Hence, exact atomic mass = 36.21 × 3 = 108.63

Teacher's Note: Equivalent mass from chloride, approximate atomic mass from Dulong–Petit, round valency.

Exam Note: Round valency to a whole number before the final mass.

Question Example 27. On dissolving 2.0 g of metal in sulphuric acid, 4.51 g of the metal sulphate was formed. The specific heat of the metal is 0.057 cal g−1. What is the valency of the metal and exact atomic mass?

Solution. Equivalent mass of SO42− radical = ionic mass/valency = 96/2 = 48
Mass of metal sulphate = 4.51 g; mass of metal = 2.0 g; mass of sulphate radical = (4.51 − 2.0) = 2.51 g
2.51 g of sulphate radical combine with 2.0 g of metal, so 48 g of sulphate radical will combine with (2/2.51) × 48 = 38.24 g metal. Equivalent mass of metal = 38.24
According to Dulong and Petit's law, approximate atomic mass = 6.4/0.057 = 112.3
Valency = 112.3/38.24 = 2.9 ≈ 3
Exact atomic mass = 38.24 × 3 = 114.72
Corrected: the book prints 6.4/0.057 = 112.5 (and 112.5/38.24 = 2.9); the exact value is 112.3, which does not change the valency (3) or the final answer.

Teacher's Note: Radical equivalent mass 48 gives the metal's equivalent mass; Dulong–Petit fixes valency.

Exam Note: Round valency to nearest integer, then multiply.

Law of Isomorphism

Question Example 28. Potassium chromate is isomorphous to potassium sulphate (K2SO4) and is found to contain 26.78% chromium. Calculate the atomic mass of chromium (K = 39.10).

Solution. Since the formula of potassium sulphate is K2SO4, the formula of potassium chromate should be K2CrO4 as it is isomorphous to K2SO4.
If the atomic mass of chromium is A, then formula mass of potassium chromate = 2 × 39.1 + A + 64 = (142.2 + A)
% of chromium = A/(142.2 + A) × 100 = 26.78
100A = 26.78 (142.2 + A)
A = (26.78 × 142.2)/73.22 = 52.00

Teacher's Note: Isomorphism gives the formula K₂CrO₄; then use % of Cr to find A.

Exam Note: Derive the formula from isomorphism first.

Percentage Composition of a Compound

Question Example 29. One gram of a chloride was found to contain 0.835 g of chlorine. Its vapour density is 85. Calculate its molecular formula.

Solution. Mass of metal chloride = 1 g; mass of chlorine = 0.835 g; mass of metal = (1 − 0.835) = 0.165 g
Equivalent mass of metal = (0.165 × 35.5)/0.835 = 7.01
Valency of the metal = 2 V.D./(E + 35.5) = (2 × 85)/(7.01 + 35.5) = 4
Formula of the chloride = MCl4

Teacher's Note: Equivalent mass from chlorine content; valency x = 2 V.D./(E + 35.5).

Exam Note: Round valency to whole number; give formula MClₓ.

Question Example 30. The oxide of an element contains 32.33 per cent of the element and the vapour density of its chloride is 79. Calculate the atomic mass of the element.

Solution. Mass of the element = 32.33 parts; mass of oxygen = (100 − 32.33) = 67.67 parts
Equivalent mass of the element = (32.33/67.67) × 8 = 3.82
Valency of the element = 2 V.D./(E + 35.5) = (2 × 79)/(3.82 + 35.5) = 4
Hence, the atomic mass of the element = 3.82 × 4 = 15.28

Teacher's Note: Equivalent mass from oxide (×8), valency from chloride vapour density.

Exam Note: Atomic mass = equivalent mass × valency.

Question Example 31. Calculate the percentage composition of calcium nitrate.

Solution. The formula of calcium nitrate is Ca(NO3)2. Formula mass = 40 + 2 × 14 + 6 × 16 = 164
% of Ca = (40/164) × 100 = 24.4 (book: 24)
% of N = (28/164) × 100 = 17.1 (book: 17)
% of O = 100 − (24.4 + 17.1) = 58.5 (book: 59)
(The book rounds each value to a whole number.)

Teacher's Note: Percentage = (mass of element in formula / formula mass) × 100.

Exam Note: Count atoms from the bracket: Ca(NO₃)₂ has 2 N, 6 O.

Question Example 32. Determine the percentage of water of crystallisation, iron, sulphur and oxygen in pure ferrous sulphate (FeSO4·7H2O).

Solution. Formula mass of ferrous sulphate = 56.0 + 32.0 + 4 × 16.0 + 7 × 18.0 = 278.0
% of water of crystallisation = (126/278) × 100 = 45.32
% of iron = (56/278) × 100 = 20.14
% of sulphur = (32/278) × 100 = 11.51
% of oxygen = (64/278) × 100 = 23.02
(Oxygen present in water molecules is not taken into account.)

Teacher's Note: Include 7 H₂O (126) in the formula mass; oxygen counts only from sulphate.

Exam Note: Oxygen of water is excluded from the oxygen percentage.

Question Example 33. It is found that 16.5 g of metal combine with oxygen to form 35.60 g of metal oxide. Calculate the percentage of metal and oxygen in the compound.

Solution. Mass of oxygen in oxide = (35.60 − 16.50) = 19.10 g
% of metal = (16.50/35.60) × 100 = 46.3
% of oxygen = (19.10/35.60) × 100 = 53.7

Teacher's Note: Find oxygen by difference, then percentage of the oxide mass.

Exam Note: Divide by oxide mass, not metal mass.

Question Example 34. Hydrogen and oxygen are combined in the ratio 1 : 16 by mass in hydrogen peroxide. Calculate the percentage of hydrogen and oxygen in hydrogen peroxide.

Solution. 17 parts of hydrogen peroxide contain hydrogen = 1 part
100 parts of hydrogen peroxide contain hydrogen = (1/17) × 100 = 5.88
% of oxygen = (100 − 5.88) = 94.12

Teacher's Note: Total parts are 1 + 16 = 17; percentage = part/17 × 100.

Exam Note: Add the ratio parts to get the total first.

Question Example 35. On analysis of an impure sample of sodium chloride, the percentage of chlorine was found to be 45.5. What is the percentage of pure sodium chloride in the given sample?

Solution. Molecular mass of pure sodium chloride (NaCl) = 23 + 35.5 = 58.5
% of chlorine in pure NaCl = (35.5/58.5) × 100 = 60.6
Thus, % of purity of NaCl in the sample = (45.5/60.6) × 100 = 75

Teacher's Note: Compare chlorine in the sample with chlorine in pure NaCl (60.6%).

Exam Note: Purity = observed % Cl / theoretical % Cl.

Determination of Empirical and Molecular Formulae

Question Example 36. Calculate the empirical formula for a compound that contains 26.6% potassium, 35.4% chromium and 38.1% oxygen. [Given K = 39.1; Cr = 52; O = 16]

Solution.
ElementPercentageAtomic massRelative number of atomsSimplest ratioSimplest whole number ratio
Potassium26.639.126.6/39.1 = 0.680.68/0.68 = 11 × 2 = 2
Chromium35.452.035.4/52 = 0.680.68/0.68 = 11 × 2 = 2
Oxygen38.116.038.1/16 = 2.382.38/0.68 = 3.53.5 × 2 = 7
Therefore, empirical formula is K2Cr2O7.

Teacher's Note: Divide percentages by atomic masses, then by the smallest; clear the 3.5 by doubling.

Exam Note: Multiply by 2 when a ratio ends in .5.

Question Example 37. A compound contains 34.8% oxygen, 52.2% carbon and 13.0% hydrogen. What is the empirical formula mass of the compound?

Solution.
ElementPercentageAtomic massRelative number of atomsSimplest ratio
Oxygen34.81634.8/16 = 2.1752.175/2.175 = 1
Carbon52.21252.2/12 = 4.354.35/2.175 = 2
Hydrogen13.0113.0/1 = 13.013.0/2.175 = 6
The empirical formula is C2H6O. Empirical formula mass = (2 × 12) + (6 × 1) + 16 = 46

Teacher's Note: Mole ratio O : C : H = 1 : 2 : 6 gives C₂H₆O; add atomic masses for 46.

Exam Note: The question asks the mass, not just the formula.

Question Example 38. A compound of carbon, hydrogen and nitrogen contains these elements in the ratio 9 : 1 : 3.5. Calculate the empirical formula and the molecular formula if its molecular mass is 108.

Solution.
ElementElement ratioAtomic massRelative number of atomsSimplest ratio
Carbon9129/12 = 0.750.75/0.25 = 3
Hydrogen111/1 = 11/0.25 = 4
Nitrogen3.5143.5/14 = 0.250.25/0.25 = 1
The empirical formula = C3H4N. Empirical formula mass = (3 × 12) + (4 × 1) + 14 = 54
n = Mol. mass/Emp. mass = 108/54 = 2
Molecular formula of the compound = 2 × C3H4N = C6H8N2

Teacher's Note: Mass ratio over atomic mass gives 3 : 4 : 1; n = 108/54 = 2.

Exam Note: Multiply the empirical formula by n to get the molecular formula.

Question Example 39. A carbon compound containing only carbon and oxygen has an approximate molecular mass of 290. On analysis, it is found to contain 50% by mass of each element. What is the molecular formula of the compound?

Solution.
ElementPercentageAtomic massRelative number of atomsSimplest ratioSimplest whole number ratio
Carbon50.0124.1664.166/3.125 = 1.334
Oxygen50.0163.1253.125/3.125 = 13
The empirical formula = C4O3. Empirical formula mass = (4 × 12) + (3 × 16) = 96
Molecular mass = 290; n = 290/96 = 3 approximately
Molecular formula = 3 × C4O3 = C12O9

Teacher's Note: Ratio 1.33 : 1 is 4 : 3; molecular mass 290 is about 3 × 96.

Exam Note: Round n to the nearest whole number.

Question Example 40. A compound on analysis, was found to have the following composition: (i) Sodium = 14.31%, (ii) Sulphur = 9.97%, (iii) Oxygen = 69.50%, (iv) Hydrogen = 6.22%. Calculate the molecular formula of the compound assuming that whole of hydrogen in the compound is present as water of crystallisation. Molecular mass of the compound is 322.

Solution.
ElementPercentageAtomic massRelative number of atomsSimplest ratio
Sodium14.31230.6220.622/0.311 = 2
Sulphur9.97320.3110.311/0.311 = 1
Hydrogen6.2216.226.22/0.311 = 20
Oxygen69.50164.344.34/0.311 = 14
The empirical formula = Na2SH20O14. Empirical formula mass = (2 × 23) + 32 + (20 × 1) + (14 × 16) = 322 = molecular mass, so molecular formula = Na2SH20O14.
Whole of the hydrogen is present in the form of water, so 10 water molecules are present in the molecule. Molecular formula = Na2SO4·10H2O

Teacher's Note: Ratio 2 : 1 : 20 : 14; 20 H means 10 H₂O, leaving Na₂SO₄.

Exam Note: Remove water first, then the rest is Na₂SO₄.

Illustrations of Objective Questions (continued)

Question Illustration 11. A gas mixture contains 50% helium and 50% methane by volume. What is the percentage by mass of methane in the mixture? (a) 19.97% (b) 20.05% (c) 50% (d) 75% (e) 80.03% [CEE (Kerala) 2004]

Solution. Answer: (e) 80.03%. Molar and volume ratio will be same, i.e. 1 : 1. Mass of 1 mole CH4 and He will be 16 and 4 g respectively. Percentage by mass of CH4 = (16/20) × 100 = 80% (≈ 80.03%).

Teacher's Note: Equal volumes mean equal moles; weigh 1 mol CH₄ (16 g) against 1 mol He (4 g).

Exam Note: Volume % equals mole %, not mass %.

Question Illustration 12. The atomic composition of the entire universe is approximately given in the table: H 93% and He 7% of the total number of atoms. Hydrogen atoms constitute what percentage of the universe by mass? (a) 77% (b) 23% (c) 37% (d) 73%

Solution. Answer: (a) 77%. Mass of 93 H atoms = 93 amu; mass of 7 He atoms = 28 amu. % hydrogen by mass = 93/(93 + 28) × 100 = 77%.

Teacher's Note: Convert atom counts to masses (H = 1, He = 4) before taking the percentage.

Exam Note: Atom percent is not mass percent.

Question Illustration 13. Which pair of species has same percentage of carbon? (a) CH3COOH and C6H12O6 (b) CH3COOH and C2H5OH (c) HCOOCH3 and C12H22O11 (d) C6H12O6 and C12H22O11

Solution. Answer: (a). Percentage of carbon in acetic acid = (24/60) × 100 = 40%. Percentage of carbon in C6H12O6 = (72/180) × 100 = 40%.

Teacher's Note: Same empirical formula CH₂O gives the same carbon percentage.

Exam Note: Spot equal empirical formulae to save time.

Question Illustration 14. Which of the following alkanes has 75% of carbon? (a) C2H6 (b) CH4 (c) C3H8 (d) C4H10

Solution. Answer: (b) CH4. Percentage of carbon in methane = (12/16) × 100 = 75%.

Teacher's Note: Methane: 12 g C in 16 g gives exactly 75%.

Exam Note: Check CH₄ first; it has the lowest carbon fraction among alkanes.

Question Illustration 15. Which of the following two oxides of nitrogen have 30.5% nitrogen? (a) NO (b) NO2 (c) N2O4 (d) N2O5

Solution. Answer: (b) and (c). Percentage of nitrogen in NO2 = (14/46) × 100 = 30.5%. Percentage of nitrogen in N2O4 = (28/92) × 100 = 30.5%.

Teacher's Note: NO₂ and N₂O₄ share the empirical formula NO₂, hence equal percentages.

Exam Note: Two options are correct here.

Question Illustration 16. An organic compound contains 49.30% carbon, 6.84% hydrogen and its vapour density is 73. Molecular formula of the compound is: (a) C3H8O2 (b) C7H10O2 (c) C6H9O (d) C4H10O2 (e) C6H10O4 [CET (Kerala) 2004]

Solution. Answer: (e) C6H10O4. Molecular mass = 2 × 73 = 146. Oxygen = 100 − 49.30 − 6.84 = 43.86%.
C = (49.30/100) × (146/12) = 6; H = (6.84/100) × (146/1) = 10; O = (43.86/100) × (146/16) = 4
Molecular formula = C6H10O4; molecular mass = 12 × 6 + 10 × 1 + 16 × 4 = 146.

Teacher's Note: Atoms of X = (% × molar mass)/(100 × atomic mass); oxygen by difference.

Exam Note: Find oxygen as the remainder first.

Question Illustration 17. A compound has an empirical formula C2H4O. An independent analysis gave a value of 132.16 for its molecular mass. What is the correct molecular formula? (a) C4H4O5 (b) C10H12 (c) C7O3 (d) C6H12O3 (e) C4H8O5 [CET (Kerala) 2004]

Solution. Answer: (d) C6H12O3. Molecular formula = (C2H4O)n; n = 132.16/44 = 3. Molecular formula = (C2H4O)3 = C6H12O3.

Teacher's Note: n = molecular mass / empirical mass = 132.16/44 = 3.

Exam Note: Empirical mass of C₂H₄O is 44.

Question Illustration 18. An organic compound containing C and H has 92.30% carbon. Its empirical formula is: (a) CH (b) CH3 (c) CH2 (d) CH4

Solution. Answer: (a) CH. Carbon : hydrogen = 92.30/12 : 7.70/1 = 7.69 : 7.70 = 1 : 1. Empirical formula = CH.

Teacher's Note: Mole ratio C : H = 7.69 : 7.70, effectively 1 : 1.

Exam Note: Hydrogen is the remainder, 7.70%.

Question Illustration 19. Two oxides of a metal contain 50% and 40% of metal M respectively. If the formula of first oxide is MO, the formula of 2nd oxide will be: (a) MO2 (b) M2O3 (c) M2O (d) M2O5

Solution. Answer: (b) M2O3. Compound 1: 50 g M with 50 g O, so 1 g M combines with 1 g O. Compound 2: 40 g M with 60 g O, so 1 g M combines with 60/40 = 1.5 g O. Oxygen per fixed mass of M is in the ratio 1 : 1.5 = 2 : 3. Since the first oxide is MO (M2O2), the second is M2O3.

Teacher's Note: Fix 1 g of M; oxygen ratio 1 : 1.5 gives 2 : 3 (multiple proportions).

Exam Note: Compare O per fixed mass of metal.

Question Illustration 20. Two elements X and Y have atomic mass 75 and 16 respectively. They combine to give a compound having 75.8% X. The formula of the compound is: (a) XY (b) X2Y (c) X2Y2 (d) X2Y3

Solution. Answer: (d) X2Y3. Molecular mass of X2Y3 = 2 × 75 + 3 × 16 = 198; percentage of X = 150/198 × 100 = 75.8%.

Teacher's Note: Test the candidate formula: 150/198 gives 75.8% X.

Exam Note: Verify by computing percentage for the option.

Download OP Tandon Solutions for JEE Math PDF

Chapter-wise OP Tandon Solutions: OP Tandon Solutions Physical Chemistry IIT JEE Chapter 1 Basic Principles Part 1

Review detailed solutions for JEE Mathematics. The OP Tandon Solutions Physical Chemistry IIT JEE Chapter 1 Basic Principles Part 1 PDF provides comprehensive answers mapped to standard OP Tandon Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with OP Tandon Solutions

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these OP Tandon Solutions for JEE Chemistry?

They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the OP Tandon JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these OP Tandon solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising OP Tandon JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.