Step-by-Step Narendra Awasthi Solutions for JEE Chemistry Chapter 08 Electrochemistry
Explore reliable textbook solutions for Chapter 08 Electrochemistry tailored for JEE learners using Narendra Awasthi methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Download Chapter 08 Electrochemistry Textbook Solutions PDF
Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Chapter 8 Electrochemistry - Part 2 (Problems in Chemistry: Level 1 Q150, Level 2, Level 3)
Level 1
Question 150. Conductometric titration curve of an equimolar mixture of HCl and HCN with NaOH(aq) is: (four conductance versus volume-of-NaOH graphs are given) (a) conductance falls sharply, then rises slightly to a flat line; (b) conductance falls, then rises steeply in a V shape; (c) conductance falls, stays flat over a long middle stretch, then rises; (d) conductance falls sharply, then rises slowly over a middle stretch, then rises sharply.
Solution. Answer (from key): (d). Molar conductivity of H+ and OH- is very high compared with other ions. Initially the conductance falls sharply as the free H+ of HCl is consumed. It then rises slowly as the weak acid HCN is neutralised to its salt (NaCN). After complete neutralisation the conductance rises sharply because of the excess OH-.
Teacher's Note: Strong acid first (fast fall), weak acid second (slow rise), excess strong base last (steep rise): three slopes.
Exam Note: Match each slope to its ion change.
Level 2
Level 2, Question 1. In the Hall process, aluminum is produced by the electrolysis of molten Al2O3. How many seconds would it take to produce enough aluminum to make a case of 24 cans of aluminum soft-drink, if each can uses 5.0 g of Al, a current of 9650 amp is employed, and the current efficiency of the cell is 90.0%?
(a) 203.2 (b) 148.14 (c) 333 (d) 6.17
Solution. Answer (from key): (b) 148.14 s. Equivalents of Al = W/E = (I × η × t)/96500, so (24 × 5)/(27/3) = (9650 × 0.9 × t)/96500, giving t = 148.14 s.
Teacher's Note: Mass of Al to equivalents (E = 27/3 = 9), then multiply current by efficiency.
Exam Note: Efficiency multiplies current, not time.
Level 2, Question 2. 108 g fairly concentrated solution of AgNO3 is electrolyzed using 0.1 F of electricity. The weight of resulting solution is:
(a) 94 g (b) 11.6 g (c) 96.4 g (d) None of these
Solution. Answer (from key): (c) 96.4 g. Anode: 2H2O → 4H+ + O2 + 4e-. Cathode: Ag+ + e- → Ag. Equivalents of O2 evolved = equivalents of Ag formed = 0.1. Loss in weight = (0.1 × 32)/4 + 0.1 × 108 = 0.8 + 10.8 = 11.6 g. Weight of final solution = 108 − 11.6 = 96.4 g.
Teacher's Note: Solution loses both the deposited Ag and the evolved O2; 11.6 g is the loss, not the answer.
Exam Note: Answer asks remaining solution, not mass lost.
Level 2, Question 3. The electrolysis of acetate solution produces ethane according to reaction: 2CH3COO- → C2H6(g) + 2CO2(g) + 2e-. The current efficiency of the process is 80%. What volume of gases would be produced at 27°C and 740 torr, if the current of 0.5 amp is passed through the solution for 96.45 min?
(a) 6.0 L (b) 0.60 L (c) 1.365 L (d) 0.91 L
Solution. Answer (from key): (d) 0.91 L. Equivalents of CO2 produced = (I × η × t)/96500 = (0.5 × 0.8 × 96.5 × 60)/96500 = 0.024. Moles of CO2 (n = 1) = 0.024; moles of C2H6 (n = 2) = 0.012. Total moles of gases = 0.036. V = nRT/P = (0.036 × 0.0821 × 300)/(740/760) = 0.91 L.
Teacher's Note: Each 2e- gives 3 mol gas; count total gas moles, then use PV = nRT with T in kelvin.
Exam Note: Convert torr to atm and °C to K.
Level 2, Question 4. A layer of chromium metal 0.25 mm thick is to be plated on an auto bumper with a total area of 0.32 m2 from a solution containing CrO42-. What current flow is required for this electroplating if the bumper is to be plated in 60 s? The density of chromium metal is 7.20 g/cm3.
(a) 4.9 × 103 A (b) 1.78 × 103 A (c) 5.3 × 104 A (d) 10.69 × 106 A
Solution. Answer (from key): (d). Total volume of metal layer = 0.25 × 0.32 × 10-3 = 0.08 × 10-3 m3. Total weight of chromium = 0.08 × 7.20 × 106 × 10-3 = 576 g. (576/52) × 6 = (I × 60)/96500, so I = 10.69 × 104 A. Note: the option as printed reads 10.69 × 106 A, but the worked value is 10.69 × 104 A (option (d) is the intended match; the printed exponent appears to be a misprint).
Teacher's Note: Chromium from CrO42- is Cr(VI), so 6 faradays per mole; volume times density gives mass.
Exam Note: Show unit conversion m3 to cm3.
Level 2, Question 5. 100 mL of 0.05 M CuSO4(aq) solution was electrolyzed using inert electrodes by passing current till the pH of the resulting solution was 2. The solution after electrolysis was neutralized and then treated with excess KI and formed I2 titrated with 0.04 M Na2S2O3. Calculate the required volume (in mL) of Na2S2O3:
(a) 112.5 mL (b) 100 mL (c) 125 mL (d) None of these
Solution. Answer (from key): (a) 112.5 mL. Initial m-moles of Cu2+ = 5. At pH 2, m-moles of H+ produced = 100 × 10-2 = 1, so m-moles of Cu converted = 1/2 = 0.5. Cu2+ remaining = 5 − 0.5 = 4.5 m-moles. 2Cu2+ + 4I- → Cu2I2 + I2 and I2 + 2Na2S2O3 → 2NaI + Na2S4O6. m-moles of Cu2+ remaining = m-moles of Na2S2O3: 4.5 = 0.04 × V, so V = 112.5 mL.
Teacher's Note: Each H+ formed means half a Cu2+ deposited; remaining Cu2+ equals thiosulfate equivalents.
Exam Note: Link pH to Cu deposited first.
Level 2, Question 6. If the equilibrium constant for the reaction H+(aq) + OH-(aq) ⇌ H2O(l) is 1013 at certain temperature then what is the E° for the reaction, 2H2O(l) + 2e- ⇌ H2(g) + 2OH-(aq). Given: 2.303RT/F = 0.066.
(a) 1.230 V (b) −0.858 V (c) −0.80 V (d) −0.8274 V
Solution. Answer (from key): (b) −0.858 V. 2H2O ⇌ 2H+ + 2OH- (ΔG° = ΔG1°); 2H+ + 2e- ⇌ H2 (ΔG2° = 0); the sum is the required reaction. −2FE° = −RT ln(10-26) − 0, so E° = (0.066/2) log(10-26) = −0.858 V.
Teacher's Note: Water ionisation Kw = 10-13 here; two ions formed, so K = 10-26 for the doubled reaction.
Exam Note: Use given 0.066, not 0.0591.
Level 2, Question 7. A fuel cell develops an electrical potential from the combustion of butane at 1 bar and 298 K: C4H10(g) + 6.5O2(g) → 4CO2(g) + 5H2O(l); ΔrG° = −2746 kJ/mol. What is E° of a cell?
(a) 4.74 V (b) 0.547 V (c) 4.37 V (d) 1.09 V
Solution. Answer (from key): (d) 1.09 V. To find n, split the reaction into half-reactions. Anode: C4H10 + 8H2O → 4CO2 + 26H+ + 26e-. Cathode: 6.5O2 + 26H+ + 26e- → 13H2O. So n = 26 and E° = −ΔG°/(nF) = 2746 × 1000/(26 × 96500) = 1.09 V.
Teacher's Note: Butane combustion transfers 26 electrons per mole (4 C each changing oxidation state in total by 26).
Exam Note: Find n from half-reactions first.
Level 2, Question 8. The cell Pt|H2(g, 0.1 bar)|H+(aq), pH = X||Cl-(aq, 1 M)|Hg2Cl2|Hg|Pt, has e.m.f. of 0.5755 V at 25°C. The SOP of calomel electrode is −0.28 V, then pH of solution will be:
(a) 11 (b) 4.5 (c) 5.5 (d) None of these
Solution. Answer (from key): (c) 5.5. For the normal calomel electrode ERP = E°RP = 0.28 V. Ecell = (0.28 − 0) − (0.0591/2) log([H+]2/PH2) gives 0.5755 = 0.28 + 0.0591 pH − (0.0591/2) log(0.1), so pH = 5.5.
Teacher's Note: SOP −0.28 V means SRP +0.28 V; the hydrogen electrode is the anode.
Exam Note: Convert SOP to SRP before using Ecell.
Level 2, Question 9. For a cell reaction 2H2(g) + O2(g) → 2H2O(l), ΔrS°298 = −0.32 kJ/K. What is the value of ΔfH°298(H2O, l)? Given: O2(g) + 4H+(aq) + 4e- → 2H2O(l); E° = 1.23 V.
(a) −285.07 kJ/mol (b) −570.14 kJ/mol (c) 285.07 kJ/mol (d) None of these
Solution. Answer (from key): (a) −285.07 kJ/mol. 2H2 → 4H+ + 4e- (E = 0.0 V) and O2 + 4H+ + 4e- → 2H2O (E = 1.23 V), so E°cell = 1.23 V. ΔrG°298 = −nFE° = −4 × 96500 × 1.23 = −474.78 kJ. ΔrH°298 = ΔrG° + TΔrS° = −474.78 + 298 × (−0.32) = −570.14 kJ for 2 mol, so ΔfH°(H2O, l) = −285.07 kJ/mol.
Teacher's Note: The reaction forms 2 mol water, so divide ΔH by 2 for the formation enthalpy.
Exam Note: Divide by 2 for per-mole value.
Level 2, Question 10. What is the potential of an electrode which originally contained 0.1 M NO3- and 0.4 M H+ and which has been treated by 80% of the cadmium necessary to reduce all the NO3- to NO(g) at 1 bar? Given: NO3- + 4H+ + 3e- → NO + 2H2O; E° = 0.96 V; log 2 = 0.3.
(a) 0.84 V (b) 1.08 V (c) 1.23 V (d) 1.36 V
Solution. Answer (from key): (a) 0.84 V. After addition of Cd and its oxidation into Cd2+, with x = 0.08 reacted: [NO3-] remaining = 0.02 M and [H+] remaining = 0.08 M. E = 0.96 − (0.0591/3) log(1/([NO3-][H+]4)) = 0.96 − (0.0591/3) log(1/(0.02 × (0.08)4)) = 0.84 V.
Teacher's Note: 80% Cd reduces 0.08 M nitrate and uses 0.32 M H+ (4 per nitrate); apply Nernst to what remains.
Exam Note: Track both nitrate and H+ remaining.
Level 2, Question 11. The standard reduction potential of normal calomel electrode and reduction potential of saturated calomel electrodes are 0.27 and 0.33 volt respectively. What is the concentration of Cl- in saturated solution of KCl?
(a) 0.1 M (b) 0.01 M (c) 0.001 (d) None
Solution. Answer (from key): (a) 0.1 M. E° for normal calomel electrode = E° for saturated calomel electrode as given: 0.33 = 0.27 − (0.06/2) log[Cl-]2, so [Cl-] = 0.1 M. (As printed in the book; the real saturated KCl concentration is far higher, so treat this as a textbook exercise.)
Teacher's Note: Calomel electrode potential depends on chloride via −0.06 log[Cl-]; solve for the log.
Exam Note: Use the book data as given.
Level 2, Question 12. Determine the potential of the following cell: Pt|H2(g, 0.1 bar)|H+(aq, 10-3 M)||MnO4-(aq, 0.1 M), Mn2+(aq, 0.01 M), H+(aq, 0.01 M)|Pt. Given: E° (MnO4-|Mn2+) = 1.51 V.
(a) 1.54 V (b) 1.48 V (c) 1.84 V (d) none of these
Solution. Answer (from key): (b) 1.48 V. Anode: H2(g) → 2H+(aq) + 2e- (E° = 0.0 V). Cathode: MnO4- + 8H+ + 5e- → Mn2+ + 4H2O (E° = 1.51 V). Ecell = ERP(RHS) − ERP(LHS) = [1.51 − (0.06/5) log(0.01/(0.1 × (10-2)8))] − [0 − (0.06/2) log(0.1/(10-3)2)] = 1.33 + 0.15 = 1.48 V.
Teacher's Note: Cathode term uses [H+]8 with n = 5; hydrogen electrode uses n = 2.
Exam Note: Show both Nernst terms separately.
Level 2, Question 13. Copper reduces NO3- into NO and NO2 depending upon concentration of HNO3 in solution. Assuming [Cu2+] = 0.1 M, and PNO = PNO2 = 10-3 bar. At which concentration of HNO3, thermodynamic tendency for reduction of NO3- into NO and NO2 by copper is same? [Given: E°Cu2+|Cu = +0.34 V, E°NO3-|NO = +0.96 V, E°NO3-|NO2 = +0.79 V]
(a) 101.23 M (b) 100.56 M (c) 100.66 M (d) 100.12 M
Solution. Answer (from key): (c) 100.66 M. 3Cu + 8H+ + 2NO3- → 3Cu2+ + 2NO + 4H2O; Cu + 4H+ + 2NO3- → Cu2+ + 2NO2 + 2H2O. Let [HNO3] = X, so [H+] = [NO3-] = X. Equal tendency means ENO3-|NO = ENO3-|NO2: 0.96 − (0.0591/3) log(10-3/X5) = 0.79 − 0.0591 log(10-3/X3). Solving gives log X = 0.657 ≈ 0.66, so X = 100.66 M.
Teacher's Note: Equal tendency means equal electrode potentials of the two nitrate couples; Cu2+ cancels from both sides.
Exam Note: Write both Nernst expressions with correct powers.
Level 2, Question 14. For the cell, Pt|Cl2(g, 0.4 bar)|Cl-(aq, 0.1 M)||Cl-(aq, 0.01 M)|Cl2(g, 0.2 bar)|Pt. The measured potential at 298 K is:
(a) 0.051 V (b) −0.051 V (c) 0.102 V (d) 0.0255 V
Solution. Answer (from key): (a) 0.051 V. Anode: 2Cl-(aq) → Cl2(g) + 2e-. Cathode: Cl2(g) + 2e- → 2Cl-(aq). Cell reaction: 2Cl-(aq, RHS) + Cl2(g, LHS) → 2Cl-(aq, LHS) + Cl2(g, RHS). Ecell = −(0.06/2) log([Cl-]RHS2·PLHS/([Cl-]LHS2·PRHS)) (E°cell = 0) = −(0.06/2) log[(0.01)2 × 0.4/((0.1)2 × 0.2)] = 0.051 V.
Teacher's Note: Same electrode both sides, so E° cancels; potential comes only from concentration and pressure ratios.
Exam Note: Square the chloride ratio; keep pressures straight.
Level 2, Question 15. The chlorate ion can disproportionate in basic solution according to reaction, 2ClO3- ⇌ ClO2- + ClO4-. What is the equilibrium concentration of perchlorate ions from a solution initially at 0.1 M in chlorate ions at 298 K? Given: E°ClO4-|ClO3- = 0.36 V and E°ClO3-|ClO2- = 0.33 V at 298 K.
(a) 0.019 M (b) 0.024 M (c) 0.1 M (d) 0.19 M
Solution. Answer (from key): (a) 0.019 M. Oxidation: H2O + ClO3- → ClO4- + 2H+ + 2e-; reduction: 2H+ + ClO3- + 2e- → ClO2- + H2O. E°cell = 0.33 − 0.36 = −0.03 V and E°cell = (0.06/2) log K, so log K = −1 and K = 0.1. With 0.1 − 2x, x, x at equilibrium: x2/(0.1 − 2x)2 = 1/10, so x/(0.1 − 2x) = 0.316, 5.16x = 0.1 and x = 0.0193 ≈ 1.9 × 10-2 M.
Teacher's Note: Same species is oxidised and reduced; E°cell = E°red − E°ox couple gives K, then an ICE table.
Exam Note: Take square root of the K expression.
Level 2, Question 16. A cell diagram shown below contains one litre of buffer solution of HA (pKa = 4) and NaA in both compartments. What is the cell e.m.f.? (Figure: two hydrogen electrodes, H2(g) at 1 bar in each, joined by a salt bridge and wire; the left compartment holds HA (aq, 0.1 M) and NaA (aq, 1 M); the right compartment holds HA (aq, 1 M) and NaA (aq, 1 M).)
(a) 0.03 V (b) 0.06 V (c) −0.06 V (d) None of these
Solution. Answer (from key): (b) 0.06 V. Ecell = (0.06/1) log([H+]RHS/[H+]LHS) = 0.06[(pH)LHS − (pH)RHS]. (pH)LHS = pKa + log([A-]/[HA]) = 4 + log(1/0.1) = 5; (pH)RHS = 4. Ecell = 0.06 × (5 − 4) = +0.06 V.
Teacher's Note: Both are buffers, so use Henderson equation for each pH; potential is 0.06 times the pH difference.
Exam Note: Left pH minus right pH, sign matters.
Level 2, Question 17. Given the cell: Cd(s)|Cd(OH)2(s)|NaOH(aq, 0.01 M)|H2(g, 1 bar)|Pt(s) with Ecell = 0.0 V. If E°Cd2+|Cd = −0.39 V, then Ksp of Cd(OH)2 is:
(a) 0.1 (b) 10-13 (c) 10-15 (d) None of these
Solution. Answer (from key): (c) 10-15. Ecell = EH+|H2 − EOH-|Cd(OH)2|Cd = EH+|H2 − ECd2+|Cd. With Ecell = 0: E°cell = 0.03 log([Cd2+][OH-]2/Kw2) = 0.03 log(Ksp/Kw2), so log(Ksp/Kw2) = 0.39/0.03 = 13. Ksp = 1013 × (10-14)2 = 10-15.
Teacher's Note: Cd(OH)2 electrode potential links to Ksp through [Cd2+] = Ksp/[OH-]2.
Exam Note: Write Kw terms carefully.
Level 2, Question 18. Calculate the e.m.f. (in V) of the cell: Pt|H2(g, 0.1 bar)|BOH(aq, 0.1 M)||HA(aq, 0.1 M)|H2(g, 1 bar)|Pt. Given: Ka(HA) = 10-7, Kb(BOH) = 10-5.
(a) 0.39 V (b) 0.36 V (c) 0.93 V (d) None of these
Solution. Answer (from key): (a) 0.39 V. Ecell = (0.06/2) log([H+]RHS2·PH2,LHS/([H+]LHS2·PH2,RHS)) since α << 1. [OH-] = √(Kb × C) = 10-3, so [H+]LHS = 10-11; [H+]RHS = √(Ka × C) = 10-4. Ecell = (0.06/2) log((10-4)2 × 0.1/((10-11)2 × 1)) = 0.39 V.
Teacher's Note: Get [H+] of weak base and weak acid from √(K·C); include different H2 pressures.
Exam Note: Check pressure term: 0.1 bar left.
Level 2, Question 19. Calculate the potential of a half cell having reaction: Ag2S(s) + 2e- ⇌ 2Ag(s) + S2-(aq) in a solution buffered at pH = 3 and which is also saturated with 0.1 M H2S(aq). [Given: Ksp(Ag2S) = 10-49, Ka1·Ka2 = 10-21]
(a) 1.18 (b) 0.19 (c) −0.19 V (d) none of these
Solution. Answer (from key): (c) −0.19 V. Ka1Ka2 = [H+]2[S2-]/[H2S] = 10-21, so [S2-] = 10-21 × 0.1/(10-3)2 = 10-16. ES2-|Ag2S|Ag = E°Ag+|Ag − (0.06/2) log([S2-]/Ksp) = 0.80 − (0.06/2) log(10-16/10-49) = 0.80 − (0.06/2) × 33 = −0.19 V. (The book uses E°Ag+|Ag = 0.80 V, which is not stated in the question.)
Teacher's Note: Link S2- to Ag+ through Ksp; [S2-] comes from the combined H2S dissociation at pH 3.
Exam Note: State the E° of Ag assumed.
Level 2, Question 20. The conductivity of 0.1 N NaOH solution is 0.022 S cm-1. When equal volume of 0.1 N HCl solution is added, the conductivity of resultant solution is decreases to 0.0055 S cm-1. The equivalent conductivity in S cm2 equivalent-1 of NaCl solution is:
(a) 0.0055 (b) 0.11 (c) 110 (d) None of these
Solution. Answer (from key): (c) 110 S cm2 eq-1. Normality of resultant solution = (0.1 × V)/(V + V) = 0.05 N. Λeq = (1000 × κ)/N = 1000 × 0.0055/0.05 = 110 S cm2 eq-1.
Teacher's Note: Mixing equal volumes halves normality; Λ = 1000κ/N with κ in S cm-1.
Exam Note: Do not forget the factor 1000.
Level 2, Question 21. In above question after formation of NaCl, further 0.1 N HCl is added, the volume of which is double to that of the first portion added, the conductivity increases to 0.018 S cm-1. The value of Λeq(HCl) is [assume no change in conductivity of NaCl(aq)]:
(a) 330 S cm2 eq-1 (b) 305 S cm2 eq-1 (c) 415 S cm2 eq-1 (d) 360 S cm2 eq-1
Solution. Answer (from key): (b) 305 S cm2 eq-1. Let the first volumes be V of NaOH and V of HCl; extra HCl is 2V, so total is 4V. Resultant conc. of NaCl = 0.1V/4V = 0.025 N and HCl = 0.1 × 2V/4V = 0.05 N. κtotal = κNaCl + κHCl: 0.018 = (0.025 × 110)/1000 + (0.05 × Λeq(HCl))/1000, so Λeq(HCl) = (18 − 2.75)/0.05 = 305 S cm2 eq-1.
Teacher's Note: Total volume is 4V; add NaCl and HCl conductivity contributions, each N × Λ/1000.
Exam Note: Recompute normalities after final volume.
Level 2, Question 22. Given the following molar conductivities at 25°C: HCl, 426 Ω-1 cm2 mol-1; NaCl, 126 Ω-1 cm2 mol-1; NaC (sodium crotonate), 83 Ω-1 cm2 mol-1. What is the ionization constant of crotonic acid? If the conductivity of a 0.001 M crotonic acid solution is 3.83 × 10-5 Ω-1 cm-1.
(a) 10-5 (b) 1.11 × 10-5 (c) 1.11 × 10-4 (d) 0.01
Solution. Answer (from key): (b) 1.11 × 10-5. Λm°(HC) = Λm(HCl) + Λm(NaC) − Λm(NaCl) = 426 + 83 − 126 = 383 Ω-1 cm2 mol-1. Λm(HC) = κ/C = (3.83 × 10-5/0.001) × 1000 = 38.3. α = 38.3/383 = 0.1. Ka = Cα2/(1 − α) = (10-3)(0.1)2/(1 − 0.1) = 1.11 × 10-5.
Teacher's Note: Kohlrausch law gives the limiting value; degree of dissociation is Λm/Λm°.
Exam Note: Use 1 − α in the denominator.
Level 2, Question 23. Equivalent conductivity of BaCl2, H2SO4 and HCl, are x1, x2 and x3 S cm-1 eq-1 at infinite dilution. If conductivity of saturated BaSO4 solution is x S cm-1, then Ksp of BaSO4 is:
(a) 500x/(x1 + x2 − 2x3) (b) 106x2/(x1 + x2 − 2x3)3 (c) 2.5 × 105x2/(x1 + x2 − x3)2 (d) 0.25x2/(x1 + x2 − x3)2
Solution. Answer (from key): (c). Λeq°(BaSO4) = Λeq°(Ba2+) + Λeq°(SO42-) = Λeq°(BaCl2) + Λeq°(H2SO4) − Λeq°(HCl) = x1 + x2 − x3. Λm° = 2(x1 + x2 − x3). For a sparingly soluble salt Λm° = (κ/M) × 1000, so M = 1000x/(2(x1 + x2 − x3)) = 500x/(x1 + x2 − x3). Ksp = M2 = 2.5 × 105x2/(x1 + x2 − x3)2.
Teacher's Note: Combine equivalent conductivities by Kohlrausch law; molar value for a 2:2 salt is twice the equivalent value.
Exam Note: Convert equivalent to molar by factor 2.
Level 2, Question 24. The conductivity of 0.001 M Na2SO4 solution is 2.6 × 10-4 S cm-1 and increases to 7.0 × 10-4 S cm-1, when the solution is saturated with CaSO4. The molar conductivities of Na+ and Ca2+ are 50 and 120 S cm2 mol-1, respectively. What is the solubility product of CaSO4? Neglect conductivity of used water.
(a) 4 × 10-6 (b) 1.57 × 10-3 (c) 4 × 10-4 (d) 2.46 × 10-6
Solution. Answer (from key): (a) 4 × 10-6. Λm(Na2SO4) = 1000 × 2.6 × 10-4/0.001 = 260 S cm2 mol-1; λm(SO42-) = 260 − 2 × 50 = 160. Conductivity due to CaSO4 = 7 × 10-4 − 2.6 × 10-4 = 4.4 × 10-4 S cm-1. Λm(CaSO4) = 120 + 160 = 280. Solubility C = 1000 × 4.4 × 10-4/280 = 1.57 × 10-3 M. Ksp = [Ca2+][SO42-]total = (0.00157)(0.00157 + 0.001) = 4.0 × 10-6.
Teacher's Note: Subtract Na2SO4 background conductivity; sulfate is also supplied by sodium sulfate in Ksp.
Exam Note: Use total sulfate, not just solubility.
Level 2, Question 25. The ionization constant of a weak acid is 1.6 × 10-5 and the molar conductivity at infinite dilution is 380 × 10-4 S m2 mol-1. If the cell constant is 0.01 m-1, then conductance of 0.01 M acid solution is:
(a) 1.52 × 10-5 S (b) 1.52 S (c) 1.52 × 10-3 S (d) 1.52 × 10-4 S
Solution. Answer (from key): (b) 1.52 S. Ka = cα2/(1 − α) ⇒ 1.6 × 10-5 = 0.01 × α2/(1 − α), so α = √(1.6 × 10-5/0.01) = 0.04. α = Λm/Λm°, so Λm = 0.04 × 380 × 10-4 = 15.2 × 10-4 S m2 mol-1. κ = Λm × C = 15.2 × 10-4 × 103 × 10-2 = 1.52 × 10-2 S m-1 (1 m3 = 1000 L). κ = G · G* with G* = l/A = 0.01 m-1, so G = 1.52 × 10-2/0.01 = 1.52 S.
Teacher's Note: Weak acid: α = √(Ka/c); then κ = Λmc in SI units and G = κ/G*.
Exam Note: Keep SI units: concentration in mol m-3.
Level 2, Question 27. During electrolysis of H2SO4(aq) with high charge density, H2S2O8 is formed as by product. In such electrolysis 22.4 L H2(g) and 8.4 L O2(g) liberated at 1 atm and 273 K at electrode. The moles of H2S2O8 formed is:
(a) 0.25 (b) 0.50 (c) 0.75 (d) 1.00
Solution. Answer (from key): (a) 0.25. Total electrons = 2 × (22.4/22.4) = 2 mol, shared among O2 (4e- each) and H2S2O8 (2e- each): 2 = 4 × (8.4/22.4) + 2n = 1.5 + 2n, so n = 0.25.
Teacher's Note: Electrons at the cathode (from H2) must equal electrons released at the anode among O2 and persulfate.
Exam Note: Balance electron count at both electrodes.
Level 3: Passage 1
Passage 1, Question 1. A galvanic cell consists of three compartments as shown in the figure (Zn(s) electrode in the first compartment with ZnSO4 (1 M), a middle compartment with NaNO3 (1 M), and a third compartment with CuSO4 (1 M) and Cu(s) electrode; compartments are separated by porous barriers and the electrodes are joined by a wire). The first compartment contains ZnSO4 (1 M) and III compartment contains CuSO4 (1 M). The mid compartment contains NaNO3 (1 M). Each compartment contains 1 L solution: E°Zn2+/Zn = −0.76 V; E°Cu2+/Cu = +0.34 V. The concentration of Zn2+ in first compartment after passage of 0.1 F charge will be:
(a) 1 M (b) 1.05 M (c) 1.025 M (d) 0.5 M
(Figure described in words; it only shows the arrangement of the three compartments.) Transport of ions between compartments is taken as in the book.
Solution. Answer (from key): (c) 1.025 M. Equivalent of Zn2+ produced = 0.1, or moles of Zn2+ = 0.05. The positive charge increases in the first compartment, so, to maintain electrical neutrality, Zn2+ moves toward compartment II and NO3- moves toward the first. The solution is always electrically neutral, so the charge of 1 Zn2+ is neutralised by 2NO3-. [Zn2+] in first compartment = 1 + 0.05/2 = 1.025 M.
Teacher's Note: Zn2+ formed is 0.05 mol, but half of this charge is balanced by migration, leaving net rise of 0.025 M.
Exam Note: Apply charge balance, not just Faraday.
Passage 1, Question 2. (Same cell and 0.1 F as in Question 1.) The concentration of NO3- in mid compartment after passage of 0.1 F of charge will be:
(a) 0.95 M (b) 0.90 M (c) 0.975 M (d) 1.05 M
Solution. Answer (from key): (a) 0.95 M. Concentration of NO3- in second compartment = 1 − 0.05 = 0.95 M, since 0.05 mol NO3- moves toward the first compartment.
Teacher's Note: Nitrate migrates toward the zinc compartment to balance new Zn2+; 0.05 mol leaves the middle.
Exam Note: Subtract migrated moles from 1 mol.
Passage 1, Question 3. (Same cell and 0.1 F as in Question 1.) The concentration of SO42- ion in III compartment will be:
(a) 1.05 M (b) 1.025 M (c) 0.95 M (d) 0.975 M
Solution. Answer (from key): (d) 0.975 M. In the third compartment moles of Cu2+ reduced = 0.05/2 = 0.025 (taken as in the book). The relative negative charge increases, so SO42- and Na+ move toward the opposite direction to maintain electrical neutrality. [SO42-]remaining = 1 − 0.025/2 = 0.975 M. (Book model as printed; the key and hint agree on 0.975 M.)
Teacher's Note: Cu2+ deposition leaves excess sulfate charge; sulfate migrates out toward the middle compartment.
Exam Note: Follow the book transport model.
Level 3: Passage 2
Passage 2, Question 1. The cell potential (Ecell) of a reaction is related as ΔG = −nFEcell, where ΔG represents max. useful electrical work and n = no. of moles of electrons exchanged during the reaction. For reversible cell reaction at constant pressure d(ΔG) = (ΔrV)dp − (ΔrS)·dT, so at constant pressure d(ΔG) = −(ΔrS)·dT. ΔG = ΔH − T·ΔS ...(1); ΔG = ΔH + T(d(ΔG)/dT)p ...(2). (dEcell/dT)p is known as temperature coefficient of the e.m.f of the cell. The temperature coefficient of the e.m.f. of cell, (dE/dT)p is given by:
(a) nF/ΔS (b) ΔS/nF (c) ΔS/(nFT) (d) −nFE
Solution. Answer (from key): (b) ΔS/nF. From equations (1) and (2), ΔS = −d(ΔG)/dT = d(nFE)/dT, so ΔS = nF(dE/dT)p, or (dE/dT)p = ΔS/nF.
Teacher's Note: Differentiate ΔG = −nFE with respect to T at constant pressure and compare with ΔS = −(∂ΔG/∂T).
Exam Note: Memorise ΔS = nF(dE/dT).
Passage 2, Question 2. (Passage 2 continued.) At 300 K, ΔH for the reaction Zn(s) + AgCl(s) → ZnCl2(aq) + 2Ag(s) is −218 kJ/mol while the e.m.f. of the cell was 1.015 V. (dE/dT)p of the cell is:
(a) −4.2 × 10-4 V K-1 (b) −3.81 × 10-4 V K-1 (c) 0.11 V K-1 (d) 7.62 × 10-4 V K-1
Solution. Answer (from key): (b) −3.81 × 10-4 V K-1. With n = 2, ΔH = nFT(dE/dT)p − nFEcell: −218 × 1000 = 2 × 96500 × 300 (dE/dT)p − 2 × 96500 × 1.015, so (dE/dT)p = −3.81 × 10-4 V K-1.
Teacher's Note: Rewrite ΔH = ΔG + TΔS in cell terms, with n = 2 electrons per Zn.
Exam Note: Keep ΔH in joules.
Passage 2, Question 3. (Passage 2 continued.) Calculate ΔS for the given cell reaction in Question 2:
(a) −73.53 J/K mol (b) 83.53 J/K mol (c) 100 J/K mol (d) none of these
Solution. Answer (from key): (a) −73.53 J/K mol. ΔS = nF(dE/dT)p = 2 × 96500 × (−3.81 × 10-4) = −73.53 J/mol K. Corrected: the printed hint writes −75.53, an arithmetic slip; the value matching option (a) and the key is −73.53.
Teacher's Note: Use the temperature coefficient from the previous part directly in ΔS = nF(dE/dT).
Exam Note: Negative sign: entropy decreases.
Level 3: Passage 3
Passage 3, Question 1. Molar conductivity (Λm) is defined as conducting power of the ions produced by 1 mole of an electrolyte in a solution. Λm = κ/C where κ is conductivity (in S cm2 mol-1) and C is molar concentration (in mole/cm3). The molar conductivity of 0.04 M solution of MgCl2 is 200 S cm3 mol-1 at 298 K. A cell with electrodes that are 2.0 cm2 in surface area and 0.50 cm apart is filled with MgCl2 solution. Conductance of MgCl2 solution is:
(a) 8 × 10-3 S (b) 32 S (c) 0.032 S (d) None of these
Solution. Answer (from key): (c) 0.032 S. κ = Λm × C/1000 = 200 × 0.04/1000 = 8 × 10-3 S cm-1. κ = G(l/A), so 8 × 10-3 = G × (0.50/2), giving G = 0.032 S.
Teacher's Note: First find conductivity from Λm and concentration; then conductance G = κA/l.
Exam Note: Cell constant = l/A = 0.25 cm-1.
Passage 3, Question 2. (Passage 3 continued.) How much current will flow when the potential difference between the two electrodes is 5.0 V?
(a) 156.25 A (b) 0.16 A (c) 160 A (d) None of these
Solution. Answer (from key): (b) 0.16 A. G = 0.032 S; V = IR, so I = V/R = V × G = 5 × 0.032 = 0.16 A.
Teacher's Note: Ohm law in conductance form: I = VG.
Exam Note: Use G, not R, to avoid inverting.
Level 3: Passage 4
Passage 4, Question 1. In a hydrogen oxygen fuel cell, electricity is produced. In this process H2(g) is oxidised at anode and O2(g) reduced at cathode. Given: Cathode: O2(g) + 2H2O(l) + 4e- → 4OH-(aq); Anode: H2(g) + 2OH-(aq) → 2H2O(l) + 2e-. 4.48 litre H2 at 1 atm and 273 K oxidised in 9650 sec. The current produced is (in amp):
(a) 1 amp (b) 2 amp (c) 4 amp (d) 8 amp
Solution. Answer (from key): (c) 4 amp. Moles of H2 = 4.48/22.4 = 0.2 mol, giving 0.4 mol electrons = 0.4 × 96500 = 38600 C. I = 38600/9650 = 4 A.
Teacher's Note: Each H2 gives 2 electrons; charge divided by time gives current.
Exam Note: Moles of H2 via 22.4 L at STP.
Passage 4, Question 2. (Passage 4 continued.) The mass of water produced is:
(a) 7.2 gm (b) 3.6 gm (c) 1.8 gm (d) 0.9 gm
Solution. Answer (from key): (b) 3.6 g. Net reaction 2H2 + O2 → 2H2O (anode makes 2H2O per H2, cathode consumes 2H2O per O2), so 1 mol water forms per mol H2: 0.2 mol × 18 = 3.6 g.
Teacher's Note: Net water is one mole per mole of H2, since cathode consumes water the anode produces.
Exam Note: Do not count anode water alone.
Passage 4, Question 3. (Passage 4 continued.) If current produced in fuel cell, use for the deposition of Cu2+ in 1 L, 2 M CuSO4(aq) solution for 241.25 sec using Pt electrode. The pH of solution after electrolysis is:
(a) 1 (b) 2 (c) 3 (d) 4
Solution. Answer (from key): (b) 2. Charge = 4 A × 241.25 s = 965 C = 0.01 F. At the Pt anode 2H2O → O2 + 4H+ + 4e-, so 0.01 mol H+ forms in 1 L: [H+] = 0.01 M and pH = 2.
Teacher's Note: Faradays passed equal H+ formed at the anode, because water is oxidised there.
Exam Note: Volume 1 L: moles equal molarity.
Level 3: Passage 5
Passage 5, Question 1. A saturated solution in AgX (Ksp = 3 × 10-12) and AgY (Ksp = 10-12) has conductivity 0.4 × 10-6 Ω-1 cm-1. Given: limiting molar conductivity of Ag+ = 60 Ω-1 cm2 mol-1; limiting molar conductivity of X- = 90 Ω-1 cm2 mol-1. The conductivity of Y- is (in Ω-1 cm-1):
(a) 1.45 × 10-7 (b) 1.45 × 10-5 (c) 1.45 × 10-9 (d) None of these
Solution. Answer (from key): (a) 1.45 × 10-7. Let [X-] = x and [Y-] = y, so [Ag+] = x + y. (x + y)x = 3 × 10-12 and (x + y)y = 10-12 give x = 3y, so 4y2 = 10-12: y = 0.5 × 10-6 M, x = 1.5 × 10-6 M, [Ag+] = 2 × 10-6 M. κ(Ag+) = 2 × 10-6 × 60/1000 = 1.2 × 10-7; κ(X-) = 1.5 × 10-6 × 90/1000 = 1.35 × 10-7. κ(Y-) = 4 × 10-7 − 1.2 × 10-7 − 1.35 × 10-7 = 1.45 × 10-7 Ω-1 cm-1.
Teacher's Note: Common-ion Ag+ couples both Ksp equations; dividing them gives the X to Y ratio.
Exam Note: Use common Ag+; do not solve separately.
Passage 5, Question 2. (Passage 5 continued.) The limiting molar conductivity of Y- is (in Ω-1 cm2 mol-1):
(a) 290 (b) 2900 (c) 2.90 (d) None of these
Solution. Answer (from key): (a) 290. λm(Y-) = κ(Y-) × 1000/[Y-] = 1.45 × 10-7 × 1000/(0.5 × 10-6) = 290 Ω-1 cm2 mol-1.
Teacher's Note: Molar conductivity equals κ × 1000 divided by the ion concentration in mol/L.
Exam Note: Use y = 0.5 × 10-6 M.
One or More Answers is/are Correct
One or more, Question 1. If the e.m.f. of a galvanic cell is negative, it implies that:
(a) the cell reaction is spontaneous
(b) the cell reaction is non-spontaneous
(c) the cell reaction is exothermic
(d) the cell is working in reverse direction
Solution. Answer (from key): (b), (d). Negative Ecell means ΔG is positive, so the written reaction is non-spontaneous and the cell actually runs in the reverse direction. Exothermic nature is not fixed by the sign of E.
Teacher's Note: ΔG = −nFE: negative E gives positive ΔG, so the reverse reaction is the spontaneous one.
Exam Note: Sign of E fixes direction, not heat.
One or more, Question 2. Select right statement(s) about electrolysis:
(a) Electric current is used to drive a non-spontaneous reaction
(b) ΔG is positive for chemical process during electrolysis
(c) Cations and anions are moved toward the anode and cathode respectively
(d) Over voltage is generally associated with evolution of O2 gas
Solution. Answer (from key): (a), (b), (d). Electrolysis forces a non-spontaneous change (ΔG > 0). Cations move to the cathode and anions to the anode, so (c) is reversed. Overpotential is large for O2 evolution.
Teacher's Note: Option (c) is a swapped statement; cations go to the cathode in every cell.
Exam Note: Read direction words carefully.
One or more, Question 3. If the half-cell reaction A + e- → A- has a large negative reduction potential, it follows that:
(a) A is readily reduced
(b) A is readily oxidised
(c) A- is readily reduced
(d) A- is readily oxidised
Solution. Answer (from key): (d). A large negative reduction potential means A is hard to reduce, so A- readily gives up its electron (readily oxidised).
Teacher's Note: Low reduction potential means the reduced form is a strong reducing agent.
Exam Note: Reduced form oxidises easily.
One or more, Question 4. Which of the following statement is correct? If E°Cu2+|Cu = 0.34 V and E°Sn2+|Sn = −0.136 V, E°H+|H2 = −0.0 V
(a) Cu2+ ions can be reduced by H2(g)
(b) Cu can be oxidized by H+
(c) Sn2+ ions can be reduced by H2
(d) Sn can be oxidized by Cu2+
Solution. Answer (from key): (a), (d). E°(Cu2+/Cu) = 0.34 is above hydrogen, so H2 reduces Cu2+ (a). Sn (−0.136 V) is below Cu, so Cu2+ oxidises Sn (d). Cu is not oxidised by H+, and H2 does not reduce Sn2+.
Teacher's Note: A species reduces ions of any couple with a higher reduction potential.
Exam Note: Compare potentials; higher oxidises lower.
One or more, Question 5. The oxidation potential of hydrogen half-cell will be negative if:
(a) p(H2) = 1 atm and [H+] = 1 M
(b) p(H2) = 1 atm and [H+] = 2 M
(c) p(H2) = 0.2 atm and [H+] = 1 M
(d) p(H2) = 0.2 atm and [H+] = 0.2 M
Solution. Answer (from key): (b), (c). Eox = −0.0591 log[H+] + 0.0295 log PH2. (a) gives 0; (b) gives −0.0178 V; (c) gives −0.0206 V; (d) gives +0.0413 − 0.0206 = +0.0207 V.
Teacher's Note: Write Eox from the Nernst equation and substitute each option.
Exam Note: Check sign for every option.
One or more, Question 6. Which of the following arrangement will produce oxygen at anode during electrolysis?
(a) Dilute H2SO4 with Pt electrodes
(b) Fused NaOH with inert electrodes
(c) Dilute H2SO4 with Cu electrodes
(d) Concentrate aq. NaCl with Pt electrodes
Solution. Answer (from key): (a), (b). Dilute H2SO4 with Pt oxidises water to O2; fused NaOH oxidises OH- to O2. Cu anode dissolves instead, and concentrated NaCl gives Cl2.
Teacher's Note: Active anode dissolves; chloride is oxidised ahead of water in concentrated NaCl.
Exam Note: Electrode material decides anode product.
One or more, Question 7. When an aqueous concentrate solution of lithium chloride is electrolysed using inert electrodes:
(a) Cl2 is liberated at the anode
(b) Li is deposited at the cathode
(c) as the current flows, pH of the solution around the cathode remains constant
(d) as the current flows, the pH of the solution around the cathode increases
Solution. Answer (from key): (a), (d). Cl- is oxidised to Cl2 at the anode; water is reduced at the cathode to H2 and OH- (Li stays in solution), so pH near the cathode rises.
Teacher's Note: Alkali metal ions never discharge from aqueous solution; water is reduced giving OH-.
Exam Note: Cathode gives H2 and OH-.
One or more, Question 8. Oxygen and hydrogen gas are produced at the anode and cathode during the electrolysis of fairly concentrate aqueous solution of:
(a) K2SO4
(b) AgNO3
(c) H2SO4
(d) NaOH
Solution. Answer (from key): (a), (c), (d). In K2SO4, H2SO4 and NaOH solutions only water is electrolysed (O2 at anode, H2 at cathode). AgNO3 gives Ag at the cathode.
Teacher's Note: Ions that are hard to discharge leave water to be electrolysed.
Exam Note: Silver ions deposit before water.
One or more, Question 9. During the purification of copper by electrolysis:
(a) the anode used is made of copper ore
(b) pure copper is deposited on the cathode
(c) the impurities such as Ag, Au present in solution as ions
(d) concentration of CuSO4 solution remains constant during dissolution of Cu
Solution. Answer (from key): (b), (d) (corrected from the key). Corrected: the printed key gives (a), (b), (d), but the anode is impure copper, not copper ore (so (a) is true only if read loosely as impure copper). Pure copper deposits at the cathode (b) and CuSO4 concentration stays constant (d); Ag and Au fall as anode mud, not as ions, so (c) is false.
Teacher's Note: Impure copper anode, pure copper cathode; Ag and Au collect as anode mud.
Exam Note: Copper ore is never an anode.
One or more, Question 10. When a lead storage battery is discharged:
(a) SO2 is evolved
(b) lead sulphate is produced at both electrodes
(c) sulphuric acid is consumed
(d) water is formed
Solution. Answer (from key): (b), (c), (d). Discharge: Pb + PbO2 + 2H2SO4 → 2PbSO4 + 2H2O. PbSO4 forms at both electrodes, H2SO4 is consumed, water forms; no SO2.
Teacher's Note: Use the overall discharge equation and read off each option.
Exam Note: Acid density falls on discharge.
One or more, Question 11. Which of the following is characteristic of the cathode in a voltaic cell?
(a) It may gain weight during reaction
(b) Electrons flow to it through the external circuit
(c) It is where oxidation occurs
(d) It received electrons from ions in solution
Solution. Answer (from key): (a), (b). At the cathode reduction occurs: electrons arrive through the external circuit and metal may deposit (weight gain). Oxidation is at the anode, and ions receive electrons from the cathode, not the other way.
Teacher's Note: Cathode: reduction, electrons arrive, metal may plate out.
Exam Note: Cathode reduction; anode oxidation.
One or more, Question 12. In an electrochemical process, a salt bridge is used:
(a) to maintain electrical neutrality in each solution
(b) to complete the external circuit so that current can flow for long time
(c) to mix the solution of anodic and cathodic compartment
(d) to supply voltage
Solution. Answer (from key): (a). A salt bridge supplies ions to keep each half-cell neutral and completes the internal (not external) circuit; it does not mix solutions or supply voltage.
Teacher's Note: It completes the internal circuit by ion flow, not the wire circuit.
Exam Note: Salt bridge: neutrality, not voltage.
One or more, Question 13. For a reaction in a galvanic cell the value of −ΔG° at certain temperature is not necessarily equal to:
(a) nFE°
(b) RT ln K
(c) T·ΔS° − ΔH°
(d) zero
Solution. Answer (from key): (b), (d). Answer (from the key) not independently verifiable: the book gives no working and the wording is ambiguous. Read as −ΔG at the given conditions, −ΔG = nFE (not nFE° unless conditions are standard) and it is zero only at equilibrium, whereas RT ln K and TΔS° − ΔH° refer to standard values. Please check this item against your own copy.
Teacher's Note: Distinguish −ΔG (actual conditions) from −ΔG° (standard state) before matching.
Exam Note: Key answer; wording ambiguous.
One or more, Question 14. Standard electrode potential of two half-reactions are given below: Fe2+ ⇌ Fe, E° = −0.44 V; Fe3+ ⇌ Fe2+, E° = +0.77 V. If Fe2+, Fe3+ and Fe are kept together:
(a) the concentration of Fe3+ increases
(b) the concentration of Fe3+ decreases
(c) the mass of Fe increases
(d) the concentration of Fe2+ decreases
Solution. Answer (from key): (b). Fe + 2Fe3+ → 3Fe2+ is spontaneous (E° = 0.77 + 0.44 = 1.21 V), so Fe3+ decreases, Fe dissolves and Fe2+ increases.
Teacher's Note: Fe3+ (0.77 V) oxidises Fe (−0.44 V), forming Fe2+.
Exam Note: Combine half-reactions; check E°cell.
One or more, Question 15. Which of the following statements are correct regarding galvanic cell?
(a) A reaction is spontaneous from left to right if Ecell > 0
(b) A reaction occurs from right to left if Ecell < 0
(c) If the system is at equilibrium no net reaction occurs
(d) Ecell is temperature-independent
Solution. Answer (from key): (a), (b), (c). Positive Ecell means spontaneous forward reaction; negative means reverse; at equilibrium E = 0 and there is no net change. E depends on temperature through the Nernst equation, so (d) is wrong.
Teacher's Note: E is positive for forward spontaneity and zero at equilibrium; it varies with T.
Exam Note: Nernst equation contains T.
One or more, Question 16. Which of the following are concentration cells?
(a) Pt|H2(g, P1)|HCl|H2(g, P2)|Pt
(b) Cd, (Hg, a1)|Cd2+(c)|(Hg, a2), Cd
(c) Zn(s)|Zn2+(c1)||Cu2+(c2)|Cu
(d) Ag|AgCl|Cl-(aq, c1)||Br-(aq, c2)|AgBr|Ag
Solution. Answer (from key): (a), (b) (corrected from the key). Corrected: the printed key gives (a), (b), (d), but a concentration cell has the same electrode and electrolyte species on both sides. (a) is a gas (pressure) concentration cell and (b) an amalgam concentration cell. (c) uses different metals, and (d) uses different salts (AgCl/Cl- against AgBr/Br-), so it is not a concentration cell.
Teacher's Note: Same species both sides, different pressure, activity or concentration: that defines a concentration cell.
Exam Note: Different electrodes: not a concentration cell.
One or more, Question 17. In electrolyte concentration cell:
(a) the electrode material and the solution in both half-cells are composed of the same substances
(b) only the concentrations of solutions of the same substances is different
(c) E°cell = 0
(d) the Nernst equation reduces to Ecell = −(0.0591/n) log Q at 25°C
Solution. Answer (from key): (a), (b), (c), (d). Both half-cells are identical apart from concentration, so E°cell = 0 and the Nernst equation reduces to Ecell = −(0.0591/n) log Q.
Teacher's Note: Identical half-cells give zero E°; only the log Q term survives.
Exam Note: Concentration cell: E° = 0.
One or more, Question 18. The standard electrode potential of a metal-metal ion (Ag|Ag+) and metal-sparingly soluble salt anion (Ag|AgCl|Cl-) are related as:
(a) E°Ag+|Ag = E°Cl-|AgCl|Ag + (RT/F) ln Ksp
(b) E°Cl-|AgCl|Ag = E°Ag+|Ag + (RT/F) ln Ksp
(c) E°Cl-|AgCl|Ag = E°Ag+|Ag − (RT/F) ln([Cl-]/Ksp)
(d) E°Cl-|AgCl|Ag = E°Ag+|Ag − (RT/F) ln(Ksp/[Cl-])
Solution. Answer (from key): (b). With [Ag+] = Ksp/[Cl-], E = E°Ag+|Ag + (RT/F) ln Ksp − (RT/F) ln[Cl-], so at [Cl-] = 1, E°Cl-|AgCl|Ag = E°Ag+|Ag + (RT/F) ln Ksp.
Teacher's Note: Substitute [Ag+] = Ksp/[Cl-] into the Ag+|Ag Nernst equation.
Exam Note: Set [Cl-] = 1 for E°.
One or more, Question 19. Which of the following units is correctly matched?
(a) SI units of conductivity is S m-1
(b) SI units of molar conductivity is S cm2 mol-1
(c) SI unit of conductance is S-1
(d) All of these
Solution. Answer (from key): (a). Conductivity: S m-1 (a). The SI molar conductivity unit is S m2 mol-1 (S cm2 mol-1 is not SI), and conductance is measured in S (not S-1).
Teacher's Note: Check each unit: conductance S, conductivity S m-1, molar S m2 mol-1.
Exam Note: SI means metre, not centimetre.
One or more, Question 20. Which of the following statements is/are correct?
(a) The conductance of one cm3 (or 1 unit3) of a solution is called specific conductance
(b) Specific conductance increases while molar conductance decreases on progressive dilution
(c) The limiting equivalent conductivity of weak electrolyte cannot be determine exactly by extrapolation of the plot of Λeq against √c
(d) The conductance of metals is due to the movement of free electrons
Solution. Answer (from key): (a), (c), (d). Specific conductance falls on dilution while molar conductance rises, so (b) is reversed. The Λ°-versus-√c plot for a weak electrolyte is non-linear, so Λ° cannot be extrapolated (use Kohlrausch law).
Teacher's Note: On dilution κ decreases but Λm increases; weak electrolytes need Kohlrausch law.
Exam Note: (b) reverses the dilution trends.
One or more, Question 21. Which is/are correct statement?
(a) No corrosion takes place in vacuum
(b) corrosion protecting by electroplating
(c) During rusting Fe2O3·xH2O formed
(d) In presence of electrolyte, corrosion takes place with greater rate
Solution. Answer (from key): (a), (b), (c), (d). Corrosion needs oxygen and moisture, so none occurs in vacuum; electroplating protects the metal surface; rust is hydrated Fe2O3·xH2O; electrolytes speed corrosion by raising conductivity.
Teacher's Note: Corrosion is an electrochemical process needing O2, water and ions.
Exam Note: All four statements are standard facts.
One or more, Question 22. A dilute solution of KCl was placed between two Pt electrode 10 cm apart across which a potential difference of 10 volt was applied. Which is/are correct statement? (Given: molar conductivity of K+ at infinite dilution is 96.5 S cm2 mol-1.) (a) Ionic mobility of K+ is 10-3 cm2 sec-1 volt-1. (b) The speed of K+ is 10-3 cm sec-1. (c) Distance travelled by K+ is 5 × 103 sec is 5 cm. (d) The potential gradient is 1.0 volt cm-1.
Solution. Answer (from key): (a), (b), (c), (d). Mobility = λ/F = 96.5/96500 = 10-3 cm2 s-1 V-1 (a). Potential gradient = 10 V/10 cm = 1 V cm-1 (d). Speed = mobility × gradient = 10-3 cm s-1 (b). Distance in 5 × 103 s = 10-3 × 5 × 103 = 5 cm (c).
Teacher's Note: Mobility = λ/F, speed = mobility times field, distance = speed times time.
Exam Note: Chain: mobility, gradient, speed, distance.
One or more, Question 23. Given: Pt(s)|H2(g, 1 bar)|0.1 M NH4OH(aq)||0.1 M CH3COOH(aq)|H2(g, 1 bar)|Pt(s); pKb(NH4OH) = 5; pKa(CH3COOH) = 5; 2.303RT/F = 0.06. Volume of 0.1 M NH4OH in anode half cell = 100 mL, volume of 0.1 M CH3COOH in cathode half cell = 100 mL. Which is/are correct statement?
(a) The emf of given cell is 0.48 V
(b) The emf of given cell is 0.36 V when 50 mL, 0.1 M NaOH added to cathode compartment
(c) The emf of given cell is 0.36 V when 50 mL 0.1 M HCl added to anode compartment
(d) The emf of given cell is 0.192 V when 100 mL 0.1 M NaOH added to anode compartment
Solution. Answer (from key): (a), (b), (c). E = 0.06 (pHanode − pHcathode). Initially pH(base) = 11 and pH(acid) = 3, so E = 0.48 V (a). (b) Half-neutralising the acid gives pH = pKa = 5: E = 0.06 × (11 − 5) = 0.36 V. (c) Half-neutralising the base gives pOH = 5, pH = 9: E = 0.06 × (9 − 3) = 0.36 V. (d) Adding 10 mmol NaOH to the base gives [OH-] ≈ 0.05 M (pH ≈ 12.7) and E ≈ 0.58 V, not 0.192 V.
Teacher's Note: Each side is a hydrogen electrode; E equals 0.06 times the pH difference.
Exam Note: Buffers form at half-neutralisation.
One or more, Question 24. Given: Pt(s)|Cl2(g, P1 atm)|Cl-(C1)||Cl-(C2)|Cl2(g, P2 atm)|Pt(s). Identify in which of following condition working of cell takes place:
(a) C1 > C2 and P1 = P2
(b) P2 > P1 and C1 = C2
(c) C1 < C2 and P1 = P2
(d) P2 < P1 and C1 = C2
Solution. Answer (from key): (a), (b). Ecell = 0.03 log(C12P2/(C22P1)) (E° = 0). The cell works spontaneously when this is positive: C1 > C2 or P2 > P1.
Teacher's Note: Write E from the Nernst equation; work requires E greater than zero.
Exam Note: Positive E means the cell works.
One or more, Question 25. 1000 mL 1 M CuSO4(aq) is electrolysed by 9.65 amp current for 100 sec using Pt-electrode. Which is/are correct statement?
(a) Blue colour intensity decreases during electrolysis.
(b) Blue colour intensity remains constant if Cu-electrode used.
(c) pH of solution is 8 after electrolysis.
(d) 28 mL of CH4 at 1 atm and 273 K required to its combustion by O2, liberated during electrolysis.
Solution. Answer (from key): (a), (b), (d). Charge = 9.65 × 100 = 965 C = 0.01 F. (a) Cu2+ is deposited, so blue fades. (b) With a Cu anode, Cu dissolves as fast as it deposits. (c) 0.01 mol H+ in 1 L gives pH 2 (acidic), not 8. (d) O2 = 0.01/4 = 0.0025 mol; CH4 + 2O2 needs 0.00125 mol CH4 = 28 mL.
Teacher's Note: Pt anode makes acid and loses Cu2+; Cu anode keeps concentration fixed.
Exam Note: Compute H+ and O2 from 0.01 F.
Match the Column
Match the column, Question 1.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching same entries of Column-II.
| Column-I | Column-II |
|---|---|
| (A) Dilute solution of HCl | (P) O2 evolved at anode |
| (B) Dilute solution of NaCl | (Q) H2 evolved at cathode |
| (C) Concentrate solution of NaCl | (R) Cl2 evolved at anode |
| (D) Fairly concentrate solution of AgNO3 | (S) Ag deposition at cathode |
Solution. Answer (from key): A → P, Q; B → P, Q; C → Q, R; D → P, S. Dilute HCl and dilute NaCl: water is electrolysed (O2 at anode, H2 at cathode). Concentrated NaCl: Cl2 at anode, H2 at cathode. AgNO3: O2 at anode, Ag at cathode.
Teacher's Note: Dilute solutions oxidise water; concentrated chloride oxidises to Cl2; Ag+ beats water at cathode.
Exam Note: Concentration decides Cl2 versus O2.
Match the column, Question 2.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching same entries of Column-II.
| Column-I | Column-II |
|---|---|
| (A) If SOP of substance is exist between −1.23 to −0.81 V | (P) Oxidation of substance is not possible |
| (B) If SOP of substance is exist between −0.81 V to −0.40 V | (Q) Oxidation possible only in acidic medium |
| (C) If SOP is less than −1.23 V | (R) Oxidation possible in any medium |
| (D) If SOP is greater than −0.40 V | (S) Oxidation easily takes place |
Solution. Answer (from key): A → Q; B → R; C → P; D → S, R. Taken as printed in the key (the book gives no reasoning). The ranges compare the substance with the SOP of water oxidation (−1.23 V in acid, −0.40 V in base); below −1.23 V nothing oxidises, above −0.40 V oxidation is easy in any medium. Please check the A and B matches.
Teacher's Note: Compare the substance SOP with water oxidation potentials in acid (−1.23 V) and base (−0.40 V).
Exam Note: Key answer; compare with water SOP.
Match the column, Question 3.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching same entries of Column-II.
| Column-I | Column-II (SRP) |
|---|---|
| (A) F2 + 2e- ⇌ 2F- | (P) 0.54 |
| (B) Cl2 + 2e- ⇌ 2Cl- | (Q) 1.09 |
| (C) Br2 + 2e- ⇌ Br- | (R) 1.36 |
| (D) I2 + 2e- ⇌ 2I- | (S) 2.87 |
Solution. Answer (from key): A → S; B → R; C → Q; D → P. Standard reduction potentials: F2 2.87 V, Cl2 1.36 V, Br2 1.09 V, I2 0.54 V (oxidising power falls down the group).
Teacher's Note: Oxidising power of halogens falls from F2 to I2.
Exam Note: Memorise 2.87, 1.36, 1.09, 0.54.
Match the column, Question 4.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching same entries of Column-II.
| Column-I | Column-II |
|---|---|
| (A) Pt|Fe3+, Fe2+ | (P) Metal-metal ion half-cell |
| (B) Pt|H2|H+ | (Q) Gas-gas ion half-cell |
| (C) Pt|Hg|Hg22+ | (R) Oxidation-reduction half-cell |
| (D) Pb|PbSO4|SO42- | (S) Metal sparing soluble salt half-cell |
Solution. Answer (from key): A → R; B → Q; C → P; D → S. Fe3+/Fe2+ on inert Pt is a redox half-cell; H2/H+ is a gas-ion half-cell; Hg/Hg22+ is a metal-metal ion half-cell; Pb/PbSO4/SO42- is a metal with sparingly soluble salt.
Teacher's Note: Classify by what is on the electrode: inert Pt, gas, metal in its ion, or metal with insoluble salt.
Exam Note: Pt marks redox or gas electrodes.
Match the column, Question 5.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching same entries of Column-II.
| Column-I (Property) | Column-II (Unit) |
|---|---|
| (A) Conductance | (P) S m-1 |
| (B) Conductivity | (Q) S-1 m |
| (C) Molar conductivity | (R) S m2 mol-1 |
| (D) Resistivity | (S) S |
Solution. Answer (from key): A → S; B → P; C → R; D → Q. Conductance is in siemens (S), conductivity in S m-1, molar conductivity in S m2 mol-1, and resistivity (Ω m = S-1 m).
Teacher's Note: Resistivity is the inverse of conductivity, so its unit is S-1 m.
Exam Note: Derive units from definitions.
Match the column, Question 6.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching same entries of Column-II.
| Column-I (Ion) | Column-II (Molar Conductivity) |
|---|---|
| (A) H+ | (P) 350 |
| (B) Na+ | (Q) 50 |
| (C) Li+ | (R) 39 |
| (D) Cs+ | (S) 77 |
Solution. Answer (from key): A → P; B → Q; C → R; D → S. Limiting molar conductivities (S cm2 mol-1): H+ 350, Na+ 50, Li+ 39 (smallest, most hydrated), Cs+ 77.
Teacher's Note: Smaller alkali ions are more hydrated and move slower; H+ conducts by hopping.
Exam Note: Li+ lowest, Cs+ highest in group.
Match the column, Question 7.
Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching same entries of Column-II.
| Column-I | Column-II |
|---|---|
| (A) Galvanic cell | (P) Used in space craft |
| (B) Electrolytic cell | (Q) No transformation of electrical energy into chemical energy |
| (C) Dead battery | (R) Cell reaction is spontaneous |
| (D) Fuel cell | (S) Cell reaction is non-spontaneous |
Solution. Answer (from key): A → Q, R; B → S; C → Q; D → P, Q, R. A galvanic cell has a spontaneous reaction and does not convert electrical to chemical energy; an electrolytic cell has a non-spontaneous reaction; a dead battery is at equilibrium (no conversion); a fuel cell is used in spacecraft and is spontaneous.
Teacher's Note: Galvanic and fuel cells give energy; electrolytic cells take it.
Exam Note: Spontaneous means galvanic.
Assertion-Reason Type Questions
Assertion-reason, Question 1.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: E°cell is negative for electrolytic cell.
STATEMENT-2: ΔG° is +ve for electrolytic cell.
Solution. Answer (from key): (A). Both true: ΔG° = −nFE°, so positive ΔG° means negative E°, and statement 2 explains statement 1.
Teacher's Note: ΔG° and E° have opposite signs, so one explains the other.
Exam Note: Link sign of ΔG° to E°.
Assertion-reason, Question 2.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: When 2 faraday of electricity is passed through 0.1 M H2SO4(aq), 11.2 litre O2 evolved at STP.
STATEMENT-2: Molecular weight of oxygen is 32.
Solution. Answer (from key): (B). Both true but not related: 4 F release 1 mol O2, so 2 F release 0.5 mol = 11.2 L. The molecular weight fact does not explain the volume.
Teacher's Note: 2 F gives half a mole of O2, 11.2 L at STP.
Exam Note: Reason is true but irrelevant.
Assertion-reason, Question 3.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: Copper is dissolved at anode and deposited at cathode when Cu electrodes are used and electrolyte is 1 M CuSO4(aq).
STATEMENT-2: SOP of Cu is less than SOP of water and SRP of Cu is greater than SRP of water.
Solution. Answer (from key): (C). Statement 1 is true. Statement 2 is false: SOP of Cu (−0.34 V) is greater than SOP of water (−1.23 V), so Cu is oxidised before water; only the SRP half is correct.
Teacher's Note: Cu oxidises more easily than water, so its SOP is greater, not less.
Exam Note: Compare SOP values carefully.
Assertion-reason, Question 4.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: 1 coulomb electricity deposits 1 g-equivalent of a substance.
STATEMENT-2: 1 faraday is charge on 1 mole of electricity.
Solution. Answer (from key): (D). Statement 1 is false: 1 faraday (96500 C), not 1 coulomb, deposits 1 g-equivalent. Statement 2 is true: 1 F is the charge on 1 mole of electrons.
Teacher's Note: One faraday, not one coulomb, deposits one equivalent.
Exam Note: Faraday is 96500 coulombs.
Assertion-reason, Question 5.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: If SRP of substance is −0.3 V, it's reduction is possible at cathode.
STATEMENT-2: Reduction potential of water exist between 0 to −0.8274 V at 25°C.
Solution. Answer (from key): (A). Both true: water reduces between 0 V (pH 0) and −0.8274 V (basic), so a substance with SRP of −0.3 V (higher than −0.83 V) can be reduced in preference to water, which explains statement 1.
Teacher's Note: Substance is reduced before water if its SRP exceeds water SRP at that pH.
Exam Note: Compare with water SRP range.
Assertion-reason, Question 6.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: If SRP of substance is −0.5 V then reduction of substance is possible only in basic medium.
STATEMENT-2: SRP of water is −0.8274 V and at reduction potential is zero at pH = 7.
Solution. Answer (from key): (C). Statement 1 is true (in acid or neutral water reduces first; in basic medium water is at −0.83 V). Statement 2 is false: the SRP of water at pH 7 is about −0.41 V, not zero.
Teacher's Note: Water SRP is −0.41 V at pH 7; −0.83 V only in 1 M OH-.
Exam Note: Zero is the value at pH 0.
Assertion-reason, Question 7.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: The voltage of mercury cell remains constant for longer period of time.
STATEMENT-2: It is because net cell reaction does not involve ions.
Solution. Answer (from key): (A). Both true: in the mercury cell the net reaction involves no ions in solution, so electrolyte concentration stays constant and voltage stays steady.
Teacher's Note: Constant electrolyte composition gives constant voltage.
Exam Note: Net reaction free of ions.
Assertion-reason, Question 8.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: Lead storage battery is a galvanic cell without salt bridge.
STATEMENT-2: A secondary cell is rechargeable cell.
Solution. Answer (from key): (B). Both true; being rechargeable does not explain why no salt bridge is needed (the electrodes share one electrolyte).
Teacher's Note: Same electrolyte for both electrodes removes the need for a salt bridge.
Exam Note: Both true, unrelated.
Assertion-reason, Question 9.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: The SRP of three metallic ions A, B, C are −0.3, −0.5, 0.8 volt respectively, so oxidizing power of ions is C > A > B.
STATEMENT-2: Higher the SRP higher the oxidizing power.
Solution. Answer (from key): (A). Both true: ions with higher SRP are stronger oxidising agents, so the order is C (0.8) > A (−0.3) > B (−0.5).
Teacher's Note: Rank oxidising ions directly by SRP.
Exam Note: Higher SRP, stronger oxidiser.
Assertion-reason, Question 10.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: If SOP of substance is less than −1.23 V and over voltage = 0 V, then it's oxidation in it's aqueous solution is not possible at 298 K.
STATEMENT-2: Standard reduction potential (SRP) of water is +1.23 V.
Solution. Answer (from key): (C). Statement 1 is true (water is oxidised first, at −1.23 V SOP). Statement 2 is false as written: +1.23 V is the SRP of the O2/H2O couple, whereas the SRP of water reduction is −0.83 V.
Teacher's Note: Water oxidation (SOP −1.23 V) takes over whenever substance SOP is lower.
Exam Note: Distinguish water oxidation from reduction.
Assertion-reason, Question 11.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: We cannot add the electrode potential in order to get electrode potential of third electrode if no. of moles of electrons exchanged are not same.
STATEMENT-2: Electrode potential is an extensive property.
Solution. Answer (from key): (C). Statement 1 is true (add ΔG values, not E values). Statement 2 is false: electrode potential is intensive, which is why potentials cannot simply be added.
Teacher's Note: Electrode potential is intensive; ΔG is extensive and additive.
Exam Note: Add ΔG, not E.
Assertion-reason, Question 12.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: E°cell = 0 for a chloride ion concentration cell.
STATEMENT-2: For this concentration cell where Ecell = (RT/nF) ln([Cl-]LHS/[Cl-]RHS).
Solution. Answer (from key): (B). Both true: E° is zero because both electrodes are identical; the Nernst expression is correct but does not explain why E° = 0.
Teacher's Note: Identical electrodes cancel standard potentials.
Exam Note: Formula is true but not the cause.
Assertion-reason, Question 13.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: If (dEcell/dT)p > 0 for a cell reaction then ΔS is positive.
STATEMENT-2: ΔS = nFT (dE/dT)p.
Solution. Answer (from key): (C). Statement 1 is true because ΔS = nF(dE/dT)p. Statement 2 is false: the formula has no T factor.
Teacher's Note: ΔS = nF(dE/dT); temperature does not multiply.
Exam Note: T does not appear in ΔS.
Assertion-reason, Question 14.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: Molar conductivity increases with decrease in concentration of weak electrolytes.
STATEMENT-2: No. of ions increases and no. of ions per unit volume decreases due to dilution.
Solution. Answer (from key): (A). Both true: dilution raises dissociation (more ions per mole of electrolyte), which explains the rise in molar conductivity.
Teacher's Note: Greater dissociation on dilution raises Λm.
Exam Note: Link Λm to ions per mole.
Assertion-reason, Question 15.
Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.
STATEMENT-1: Conductivity decreases with the decreases in concentration both the weak and strong electrolytes.
STATEMENT-2: No. of ions per unit volume linearly decreases in both electrolytes.
Solution. Answer (from key): (C). Statement 1 is true. Statement 2 is false: for weak electrolytes the ion count falls non-linearly because dissociation increases on dilution.
Teacher's Note: Weak electrolyte ionisation rises on dilution, so ion count is non-linear.
Exam Note: Weak electrolytes dissociate more on dilution.
Subjective Problems
Subjective, Question 1. How many faradays are required for reduction of 1 mol C6H5NO2 into C6H5NH2?
Solution. Answer (from key): 6. C6H5NO2 + 6H+ + 6e- → C6H5NH2 + 2H2O (N changes from +3 to −3), so 6 F per mole.
Teacher's Note: Count the oxidation state change of nitrogen: +3 to −3 means 6 electrons.
Exam Note: Six electrons, six faradays.
Subjective, Question 2. What is the equivalent weight of O2 in the following reaction, H2O + ½O2 + 2e- → 2OH-?
Solution. Answer (from key): 8. ½ mol O2 takes 2 mol e-, so 1 mol O2 takes 4 mol e-; equivalent weight = 32/4 = 8.
Teacher's Note: Equivalent weight = molar mass divided by electrons per mole of O2 (4).
Exam Note: Use per-mole electron count.
Subjective, Question 3. The amount of electricity which releases 2.0 g of gold from a gold salt is same as that which dissolves 0.967 g of copper anode during the electrolysis of copper sulphate solution. What is the oxidation number of gold in the gold state? (At. wt. of Cu = 63.5; Au = 197)
Solution. Answer (from key): 3. Moles of Cu = 0.967/63.5 = 0.01523, so charge = 0.03046 F (2 e- per Cu). Moles of Au = 2.0/197 = 0.01015. Electrons per Au = 0.03046/0.01015 = 3, so the oxidation number is +3.
Teacher's Note: Equal charge, so electrons per Au atom equal total electrons divided by moles of gold.
Exam Note: Equal faradays on both.
Subjective, Question 4. When a molten salt was electrolysed for 5 min with 9.65 A current, 0.72 g of the metal was deposited. Calculate the Eq. wt. of metal.
Solution. Answer (from key): 24 g/equivalent (corrected; the printed key gives 6). Corrected: charge = 9.65 × 5 × 60 = 2895 C = 0.03 F. Equivalent weight = 0.72/0.03 = 24 g/eq. The key value 6 would correspond to a 20 minute run, not the 5 minutes printed, so the printed key does not match the data as printed.
Teacher's Note: Equivalent weight = mass deposited per faraday: mass divided by Q/96500.
Exam Note: Convert minutes to seconds first.
Subjective, Question 5. During the electrolysis of a concentrated brine solution. Calculate the moles of chlorine gas produced by the passage of 4F electricity.
Solution. Answer (from key): 2. 2Cl- → Cl2 + 2e-: 2 F per mole of Cl2, so 4 F gives 2 mol.
Teacher's Note: Two faradays per mole of Cl2.
Exam Note: Chlorine needs 2e- per molecule.
Subjective, Question 6. Calculate the cell potential (in V) if ΔG = −96.5 kJ/mol and n = 1.
Solution. Answer (from key): 1. E = −ΔG/(nF) = 96500/(1 × 96500) = 1 V.
Teacher's Note: Direct use of ΔG = −nFE with kJ converted to J.
Exam Note: Convert kJ to J.
Subjective, Question 7. If Kc for the reaction Cu2+(aq) + Sn2+(aq) → Sn4+(aq) + Cu(s) at 25°C is represented as y × 109 then find the value of y. (Given: E°Cu2+|Cu = 0.34 V; E°Sn4+|Sn2+ = 0.15 V)
Solution. Answer (from key): y ≈ 0.0027 for the data as printed (corrected; the printed key gives 6). Corrected: E°cell = 0.34 − 0.15 = 0.19 V and n = 2, so log K = 2 × 0.19/0.0591 = 6.43 and K = 2.7 × 106 = 0.0027 × 109. The key value 6 matches only the integer part of log K (and would not give y × 109), so the problem statement and key do not agree; please check against your copy.
Teacher's Note: K from E°: log K = nE°/0.0591; compare with the y × 109 form.
Exam Note: Check data against key.
Subjective, Question 8. If ΔG° for the half cell MnO4-|MnO2 in an acid solution is xF then find the value of x. (Given: E°MnO4-|Mn2+ = 1.5 V; E°MnO2|Mn2+ = 1.25 V)
Solution. Answer (from key): 5 (as the magnitude; ΔG° = −5F). MnO4- → Mn2+: ΔG° = −5F × 1.5 = −7.5F. MnO2 → Mn2+: ΔG° = −2F × 1.25 = −2.5F. MnO4- → MnO2 = first minus second = −7.5F + 2.5F = −5F. Strictly x = −5; the key records the magnitude 5.
Teacher's Note: Subtract ΔG° values (not E° values) because electron numbers differ.
Exam Note: Add or subtract ΔG°, never E°.
Subjective, Question 9. If the equilibrium constant for the reaction Cd2+(aq) + 4NH3(aq) ⇌ Cd(NH3)42+(aq) is 10x then find the value of x. (Given: E°Cd2+|Cd = −0.04 V; E°Cd(NH3)42+|Cd = −0.61 V)
Solution. Answer (from key): x ≈ 19 for the data as printed (corrected; the printed key gives 7). Corrected: E°(complex) = E°(Cd2+) − (0.0591/2) log Kf, so log Kf = 2 × (0.61 − 0.04)/0.0591 = 19.3. The key value 7 follows if E°Cd2+|Cd is −0.40 V (the usual value): log Kf = 2 × 0.21/0.0591 = 7.1. The printed −0.04 V appears to be a misprint; please check against your copy.
Teacher's Note: Complexation shifts E° by (0.0591/n) log Kf; subtract the two E° values.
Exam Note: Check the printed E° value.
Step-by-Step Narendra Awasthi Solutions for JEE Math
Download Narendra Awasthi Solutions for JEE
Access the complete chapter-wise PDF for Narendra Awasthi Solutions Physical Chemistry Chapter 8 Electrochemistry Part 2. These structured Narendra Awasthi Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Mastering Core Concepts with Narendra Awasthi Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Explore More Study Resources for JEE Math
In addition to these Narendra Awasthi Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.