Download JEE Chemistry MS Chauhan Textbook Solutions: Chapter 09 Carboxylic Acid And Their Derivatives
Review structured textbook solutions for JEE Chemistry Chapter 09 Carboxylic Acid And Their Derivatives prepared by MS Chauhan. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Access MS Chauhan Textbook Answers and Solutions
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Chapter 9 Carboxylic Acid And Their Derivatives - Level 1, Level 2 and Subjective Problems
Level 1 (Answers from the key at the end of Level 1)
Question 1. Identify C in the sequence: trans-2-methylcyclohexane-1-carboxylic acid (CO2H wedge, CH3 hashed) → (SOCl2) A → (NH3) B → (P4O10, heat) C (C8H13N). Options: (a) the alcohol (CH2OH/OH compound); (b) nitrile with CN wedge and CH3 hashed (trans); (c) nitrile with CN wedge and CH3 wedge (cis); (d) nitrile with CN hashed and CH3 wedge.
Solution. Answer (b). Acid → acyl chloride (A) → primary amide (B) → nitrile (C, dehydration by P4O10). C8H13N fits the nitrile. No bond to the ring carbons is broken, so the trans relationship of the two ring substituents is retained: CN wedge, CH3 hashed.
Teacher's Note: Functional-group conversions never touch the ring stereocentres, so relative configuration is preserved.
Exam Note: Check formula C8H13N, then keep trans geometry.
Question 2. Saponification (basic hydrolysis) of C6H5C(=O)–18O–CH3 (ester oxygen labelled with the mass-18 isotope) will yield: (a) C6H5C(=O)18O− + HOCH3; (b) C6H5CO2− + H18OCH3; (c) C6H5CO2− + H18O−; (d) C6H5C(=18O)O− + HOCH3.
Solution. Answer (b). Base hydrolysis of esters is BAC2: HO− attacks the carbonyl carbon and the acyl–oxygen bond breaks. The alkoxy oxygen (18O) leaves with CH3, giving H18OCH3; the benzoate keeps only unlabelled oxygens.
Teacher's Note: Acyl–O cleavage means the label ends up in the alcohol, not the acid.
Exam Note: Label goes with the alcohol; acid unlabelled.
Question 3. Cyclohexanecarbonyl chloride + Me2NH (3 equivalents, 0 °C, 2 h) → (X) (86–89% yield). Product (X) is: (a) N,N-dimethylcyclohexanecarboxamide; (b) a gem-hydroxy bis(dimethylamino) compound; (c) a gem-bis(dimethylamino) compound with H; (d) cyclohexanecarbaldehyde.
Solution. Answer (a). Nucleophilic acyl substitution: Me2NH replaces Cl; the extra equivalents of amine take up the HCl formed. The product is the tertiary amide, cyclohexyl–C(=O)–NMe2. The amide does not react further.
Teacher's Note: Acid chloride + amine gives amide; excess amine only scavenges HCl.
Exam Note: Three equivalents: one reacts, others neutralise HCl.
Question 4. Which is the correct order of decarboxylation of the β-keto carboxylate anions R–CO–CHX–CO2− with X = F (a), Cl (b), NO2 (c), CN (d)? Options: (a) a > b > c > d; (b) c > d > a > b; (c) c > d > b > a; (d) d > c > a > b.
Solution. Answer (c): c > d > b > a. Decarboxylation of the anion gives an enolate-like carbanion at the α-carbon, so any group that stabilises the negative charge there speeds the reaction. NO2 (strongest −M/−I) > CN > Cl > F. Fluorine's lone-pair repulsion with the carbanion and poor polarisability make it the weakest stabiliser of the halogens. (Order as printed in the book's key.)
Teacher's Note: Rate follows carbanion stabilisation: nitro, then cyano, then Cl, then F.
Exam Note: Rank substituents by carbanion stabilising ability.
Question 5. Phthaloyl chloride (benzene-1,2-dicarbonyl dichloride, A) + CH3NH2 → product. Options: (a) N-methylphthalimide; (b) a hydroxy-substituted cyclic imine bearing CH3; (c) phthalhydrazide-type cyclic diamide (1,4-dioxo-phthalazine); (d) indane-1,3-dione.
Solution. Answer (a). Methylamine displaces both Cl atoms: the first gives an amide N–H, whose nitrogen attacks the second acyl chloride intramolecularly to close a five-membered ring, giving N-methylphthalimide (two C=O on N–CH3).
Teacher's Note: 1,2-Diacyl chloride plus primary amine closes to a five-membered imide.
Exam Note: Primary amine gives N-substituted phthalimide.
Question 6. Which β-keto acid shown will not undergo decarboxylation? (a) bicyclo[2.2.1]heptan-2-one with CO2H on the non-bridgehead carbon next to C=O; (b) the same bicyclic ketone with CO2H on the bridgehead carbon next to C=O; (c) PhCOCH2CO2H; (d) CH3COCH2CO2H.
Solution. Answer (b). Decarboxylation of a β-keto acid goes through a six-membered cyclic transition state and produces an enol. For the bridgehead acid (b) the enol would need a C=C at the bridgehead of the bicyclic system, which violates Bredt's rule, so it does not decarboxylate easily. (a), (c), (d) can enolise normally.
Teacher's Note: Bredt's rule forbids a bridgehead double bond, blocking enol formation.
Exam Note: Cite Bredt's rule: no bridgehead C=C.
Question 7. Match the functional-group classification with the structures: (i) five-membered ring with N–H flanked by two C=O; (ii) five-membered ring with N–H and one C=O; (iii) five-membered ring with ring O and one C=O. Options: (a) Anhydride, Lactam, Lactone; (b) Lactam, Imide, Lactone; (c) Imide, Lactone, Anhydride; (d) Imide, Lactam, Lactone.
Solution. Answer (d). (i) two acyl groups on one nitrogen = imide (succinimide); (ii) cyclic amide = lactam (2-pyrrolidone); (iii) cyclic ester = lactone (γ-butyrolactone).
Teacher's Note: Cyclic amide is lactam, cyclic ester lactone, diacyl-amine is imide.
Exam Note: Learn: imide has two acyl groups on N.
Question 8. Cyclohexyl–CH(OH)–CO2H (1) EtLi (3 eq.), (2) H+, H2O → (P) (65% yield). Product (P): (a) diol C(OH)Et2-type tertiary alcohol; (b) Cy–CH(OH)–C(=O)–Et; (c) ketal-type compound with OEt; (d) a compound with OEt and OH on the same carbon.
Solution. Answer (b). Organolithiums add to a carboxylate (RCO2Li) once to form a stable dianion gem-diolate that resists further addition; acidic work-up collapses it to the ketone. Extra equivalents deprotonate the acid and OH. Product: cyclohexyl–CH(OH)–CO–CH2CH3.
Teacher's Note: RLi plus carboxylic acid stops at the ketone via a stable dianion.
Exam Note: Two RLi on a salt gives ketone after work-up.
Question 9. Lactic acid + allyl alcohol (CH2=CH–CH2OH), conc. H2SO4 → (X) + H2O (89–91% yield). Product (X): (a) the O-allyl ether of lactic acid, free CO2H; (b) allyl lactate, CH3CH(OH)CO–O–CH2CH=CH2; (c) ethyl lactate; (d) CH3CH(OH)–CO–CH=CH2.
Solution. Answer (b). Fischer esterification: the acid and alcohol lose water to give allyl 2-hydroxypropanoate; the α-OH and the C=C are unaffected under these conditions.
Teacher's Note: Fischer esterification forms the ester; side-chain OH and alkene survive.
Exam Note: Acid + alcohol gives ester plus water.
Question 10. Diethyl 2,6-dicarboxylate of 1,1-dimethoxycyclohexane (a ketal carbon flanked by two ring carbons each bearing CO2Et) with H3O+, Δ → (A). Options: (a) cyclohexane-1,2-dione; (b) cyclohexanone; (c) ethyl 2-oxocyclohexanecarboxylate; (d) 2-oxocyclohexanecarboxylic acid.
Solution. Answer (b). Acid hydrolyses the ketal to a ketone and both esters to acids. Each acid is then β to the C=O (β-keto acid) and decarboxylates on heating, so both CO2H are lost and cyclohexanone remains.
Teacher's Note: Ketal becomes ketone; two β-keto acids each lose CO2.
Exam Note: Hydrolysis then double decarboxylation gives cyclohexanone.
Question 11. Which of the following acids on heating gives geometrical isomers as a product? (a) CH3CH(OH)CO2H; (b) 3-chlorocyclobutane-1,1-dicarboxylic acid; (c) CH3CH(OH)CH2CO2H; (d) All of these.
Solution. Answer (d). (a) α-hydroxy acid dimerises to the cyclic lactide, which has cis and trans (meso/racemic) forms. (b) The gem-diacid loses one CO2 to give 3-chlorocyclobutanecarboxylic acid as cis and trans isomers. (c) β-hydroxy acid dehydrates to crotonic acid, CH3CH=CHCO2H, as cis/trans isomers.
Teacher's Note: Check each acid's thermal pathway: lactide, decarboxylation, dehydration all give cis/trans.
Exam Note: Test each option separately; all three qualify.
Question 12. Phthalic anhydride → (MeOH) A → (PCl3) B → (MeNH2) C. Product (C) is: (a) 2-(chlorocarbonyl)-N-methylbenzamide; (b) methyl 2-(N-methylcarbamoyl)benzoate (CONHMe and CO2Me ortho); (c) 2-carbamoylbenzoate methyl ester (CONH2, CO2Me); (d) 2-(chlorocarbonyl)benzamide.
Solution. Answer (b). MeOH opens the anhydride to the mono-methyl ester acid (A). PCl3 converts only the free CO2H to COCl (B); the ester is untouched. MeNH2 turns COCl into CONHMe, so C = methyl 2-(methylcarbamoyl)benzoate.
Teacher's Note: Only the free acid converts to acyl chloride; ester stays.
Exam Note: Track which group each reagent changes.
Question 13. Phthalic anhydride → (LiAlH4) A → (PCC) B → (NH2–NH2) C. Product (C) is: (a) phthalhydrazide (1,4-dioxo-2,3-diazanaphthalene); (b) phthalazine; (c) 1,4-dihydroxyphthalazine; (d) o-phenylenediamine.
Solution. Answer (b). LiAlH4 reduces the anhydride to benzene-1,2-dimethanol (A). PCC oxidises both CH2OH groups to CHO giving phthalaldehyde (B). Hydrazine condenses with both CHO groups to close the six-membered ring: phthalazine, C8H6N2.
Teacher's Note: PCC stops at aldehyde; dialdehyde plus hydrazine closes a diazine ring.
Exam Note: Reduce, oxidise to dialdehyde, condense with N2H4.
Question 14. CH3–CHCl–CHCl–CO2− (2,3-dichlorobutanoate) → (−CO2) A → (HCl) B → (aq. KOH) C. Product (C): (a) CH3CH2CHO; (b) propane-1,3-diol; (c) acetaldehyde (CH3CHO); (d) acetone.
Solution. Answer (a). Decarboxylative loss of the β-chloride gives CH3CH=CHCl (A). HCl adds (Markovnikov, Cl-stabilised cation) to give CH3CH2CHCl2 (B). Aqueous KOH hydrolyses the gem-dichloride to the aldehyde: propanal, CH3CH2CHO (C).
Teacher's Note: Gem-dihalide hydrolysis gives a carbonyl compound; terminal gem-dihalide gives aldehyde.
Exam Note: Gem-dichloride plus aq. KOH gives aldehyde.
Question 15. A bicyclic γ-lactone bearing Cl on the ring-fusion carbon attached to the ring oxygen + R–CH2–NH2 (K2CO3, THF) → (A) (71%). Major product: (a) N-alkyl lactam without OH; (b) N-alkyl lactam with an OH at the ring-fusion carbon (hydroxy lactam); (c) NH–R substituted lactone; (d) lactone with OH and N–R.
Solution. Answer (b). The amine attacks the lactone C=O and opens the ring; the alkoxide formed sits on a carbon that also carries Cl, so Cl− is lost to give a ketone. The amide N–H then adds to this ketone, closing a five-membered ring with a hemiaminal OH: the N-alkyl hydroxy-lactam (b). (Answer taken from the book's key; mechanism rationalised here.)
Teacher's Note: Ring-opening, chloride loss to ketone, then amide N adds to ketone.
Exam Note: Explain ring opening then re-closure to hydroxy lactam.
Question 16. An optically active compound X has molecular formula C4H8O3. It evolves CO2 with NaHCO3. X reacts with LiAlH4 to give an achiral compound. X is: (a) CH3CH2CH(OH)COOH; (b) (CH3)2CHCOOH; (c) CH3CH(CH2OH)COOH; (d) CH3CH(OH)CH2COOH.
Solution. Answer (c). CO2 with NaHCO3 shows a carboxylic acid. 3-Hydroxy-2-methylpropanoic acid, CH3CH(CH2OH)CO2H, has one stereocentre (optically active). LiAlH4 gives 2-methylpropane-1,3-diol, CH3CH(CH2OH)2, whose two CH2OH groups are identical, so it is achiral. The other options give a chiral diol (a, d) or are not C4H8O3 (b).
Teacher's Note: Reduction makes two identical CH2OH arms, removing the stereocentre.
Exam Note: Check formula, acidity, then chirality after reduction.
Question 17. CH3–C(=O)–O–CH2CH3 + H–18O− → (18O labelled). One of the products is: (a) CH3C(=O)–O–H; (b) CH3CH2–18O–H; (c) CH3C(=O)–18O−; (d) CH3CH2–18O−.
Solution. Answer (c). Basic hydrolysis proceeds by attack of H18O− on the acyl carbon with acyl–oxygen cleavage. The labelled oxygen is incorporated into the acetate, CH3CO18O−; ethanol is unlabelled.
Teacher's Note: Nucleophile oxygen ends in the carboxylate; alkoxy O leaves as ethanol.
Exam Note: Label appears in acetate, not ethanol.
Question 18. Triethyl cyclopropane-1,2,3-tricarboxylate → KOH → H3O+ → PCl5 → LiAlH4 → H+/Δ → (X). Product (X) is: (a) trimethylenecyclopropane ([3]radialene); (b) benzene; (c) a methylene-cyclohexadiene; (d) a bicyclic alkene hydrocarbon.
Solution. Answer (b), as given in the book's key. Sequence: triester → tricarboxylic acid → tris(acyl chloride) → tris(hydroxymethyl)cyclopropane (C6H12O3). Loss of three H2O (C6H6) with ring expansion/rearrangement is intended to give the aromatic C6H6, benzene. Note: [3]radialene is an isomer, so this is formula-consistent only; flagged for a human check.
Teacher's Note: Triple dehydration of the triol gives C6H6; book intends aromatic benzene.
Exam Note: Count formula changes; book key gives benzene.
Question 19. Identify the final product: CH3CH(OH)COOH → (Δ) Product. (a) lactide (six-membered cyclic diester with two CH3); (b) CH2=CHCO2H; (c) CH3COCO2H; (d) CH3CH2OH.
Solution. Answer (a). α-Hydroxy acids on heating undergo intermolecular esterification of two molecules to give the cyclic six-membered diester (lactide), with loss of 2 H2O.
Teacher's Note: α-Hydroxy acids dimerise to lactides; β gives alkenoic acids.
Exam Note: Alpha-hydroxy acid heated gives lactide.
Question 20. Acetoacetic ester → (NaOEt) → (CH3I) → (NaOEt) → (CH3CH2CH2Br). Final product: (a) CH3COC(CH3)(CH2CH2CH3)COOC2H5; (b) CH3C(CH3)(CH2CH2CH3)CH2COOC2H5-type without ketone; (c) CH3CH(CH2CH2CH3)CH2COOEt; (d) CH3COC(CH3)2CH2COOEt.
Solution. Answer (a). The active methylene of acetoacetic ester is deprotonated twice and alkylated first with CH3I and then with n-propyl bromide, giving ethyl 2-acetyl-2-methylpentanoate. No hydrolysis step is involved, so the ester and ketone remain.
Teacher's Note: Two successive alkylations at the same active methylene carbon.
Exam Note: No hydrolysis, so the ester and ketone stay.
Question 21. Cyclopentanone bearing CO2Et on both α carbons (C2 and C5) and an ethyl group on C3 → (H2O, H2SO4, heat) (A). Options: (a) keto acid with ethyl at C4 and CO2H; (b) 3-ethylcyclopentanone; (c) 2-ethylcyclopentanone; (d) 2-methylcyclopentanone.
Solution. Answer (b). Acid hydrolysis converts both esters to CO2H; each is β to the ring C=O, so each decarboxylates on heating. The ethyl group on C3 is retained, giving 3-ethylcyclopentanone.
Teacher's Note: Two β-keto esters hydrolyse and decarboxylate; the alkyl group stays.
Exam Note: Name product by remaining ethyl position.
Question 22. CH2(CO2Me)2 + ? (i) Na, (ii) AcOH → CH(CO2Me)3. Which reactant completes the reaction? (a) CH2(CO2Me)2; (b) (CO2Me)2; (c) Cl–CO2Me; (d) COCl2.
Solution. Answer (c). The malonate enolate (from Na) attacks methyl chloroformate at the acyl carbon, displacing Cl−, and installs a third CO2Me group. Acetic acid then reprotonates to give CH(CO2Me)3.
Teacher's Note: Enolate acylation with chloroformate adds one CO2Me group.
Exam Note: Chloroformate is the CO2Me source.
Question 23. Arrange in order of increasing reactivity (least to most) toward nucleophiles: (1) CH3COOCH(CH3)2 (ester); (2) CH3COCl; (3) CH3CONHCH3 (amide). Options: (a) 1 < 2 < 3; (b) 3 < 1 < 2; (c) 1 < 3 < 2; (d) 2 < 1 < 3.
Solution. Answer (b): 3 < 1 < 2. Reactivity falls with better resonance donation from the leaving-group atom: N (amide) donates strongest and is least reactive; the ester O donates less; Cl donates least and is the best leaving group, so the acid chloride is most reactive.
Teacher's Note: Resonance donation lowers carbonyl electrophilicity: amide < ester < acid chloride.
Exam Note: Order: amide, ester, anhydride, acid chloride.
Question 24. Choose the best sequence for CH3–C6H4–CO2CH3 (p-isomer) → CH3–C6H4–C(=O)NHCH3. (a) H3O+; SOCl2; CH3NH2; (b) HO−/H2O; PBr3; Mg; CO2; H3O+; SOCl2; CH3NH2; (c) LiAlH4; H2O; HBr; Mg; CO2; H3O+; SOCl2; CH3NH2; (d) None of these.
Solution. Answer (a). Acid hydrolysis converts the ester to the carboxylic acid; SOCl2 gives the acid chloride; CH3NH2 gives the N-methylamide. The other sequences are longer and unsuitable (PBr3 does not convert an acid to a bromide that way), so (a) is best.
Teacher's Note: Shortest path: ester to acid, acid chloride, then amine.
Exam Note: Prefer the shortest valid sequence.
Question 25. A key step in the hydrolysis of acetamide in aqueous acid proceeds by nucleophilic addition of: (a) H3O+ to CH3CONH2; (b) H2O to protonated acetamide CH3C(=+OH)NH2; (c) H3O+ to protonated acetamide; (d) HO− to protonated acetamide.
Solution. Answer (b). In acid the amide O is protonated, making the carbonyl carbon electrophilic. Water (the available nucleophile) adds to it to give the tetrahedral intermediate, which then expels NH3 (as NH4+). Hydroxide and hydronium are not the nucleophiles in acid.
Teacher's Note: Acid activates by protonating O; water is the nucleophile.
Exam Note: Nucleophile is water, not H3O+ or HO-.
Question 26. Which reaction is not possible for acetic anhydride? (a) (CH3CO)2O + 2 HN(CH3)2 → CH3CON(CH3)2 + CH3CO2− + H2N+(CH3)2; (b) with CH3CH2OH → CH3COOCH2CH3 + CH3CO2H; (c) with C6H6/AlCl3 → CH3COC6H5 + CH3CO2H; (d) with NaCl → CH3COCl + CH3CO2Na.
Solution. Answer (d). An anhydride cannot be converted into the more reactive acid chloride by a weak nucleophile like Cl−; the reverse (acid chloride + acetate → anhydride) is what actually occurs. Reactions (a), (b) (aminolysis, alcoholysis) and (c) (Friedel–Crafts acylation) all proceed.
Teacher's Note: Reactivity only goes downhill: anhydride cannot form acid chloride with NaCl.
Exam Note: Acyl transfer goes to less reactive derivative only.
Question 27. All but one of the following react with aniline to give acetanilide. Which does not? (a) CH3COCl; (b) (CH3CO)2O; (c) CH3CHO; (d) phenyl acetate (CH3COOC6H5).
Solution. Answer (c). Acid chloride, anhydride and aryl ester (good leaving group, phenoxide) are acylating agents. An aldehyde has no leaving group (H− is not displaced), so it forms an imine (Schiff base) with aniline, not acetanilide.
Teacher's Note: Acylation needs a leaving group; aldehydes have none.
Exam Note: Aldehyde plus aniline gives imine, not amide.
Question 28. Which best describes the nucleophilic addition step in the acid-catalysed hydrolysis of acetonitrile (CH3CN)? (a) HO− attacking the nitrile carbon of neutral CH3C≡N; (b) HO− attacking the nitrile carbon of protonated CH3C≡N+–H; (c) neutral H2O attacking the nitrile carbon of unprotonated CH3C≡N; (d) H2O (as :OH2) attacking the carbon of protonated nitrile CH3C≡N+–H with the arrow from O lone pair to C.
Solution. Answer (d). In acid the nitrile N is protonated, which activates the carbon; neutral water uses its oxygen lone pair to attack that carbon. Loss of H+ gives the imidic acid, which tautomerises to acetamide and hydrolyses further to acetic acid.
Teacher's Note: Protonate N first, then water adds at carbon.
Exam Note: Acid medium: water attacks protonated nitrile, not HO-.
Question 29. The major product expected when phthalamide is treated with NaOH: (a) a hydroxy-sodium-oxide compound; (b) the diol; (c) disodium phthalate, C6H4(CO2Na)2; (d) a cyclic dimeric lactone.
Solution. Answer (c). Hydroxide hydrolyses both amide groups (releasing NH3) to give the dicarboxylate, which in NaOH is disodium phthalate.
Teacher's Note: Amide hydrolysis in base gives carboxylate salt and ammonia.
Exam Note: Base hydrolysis ends as the sodium salt.
Question 30. Which of the following acids remains unaffected on heating? (a) malonic acid; (b) maleic acid; (c) fumaric acid; (d) succinic acid.
Solution. Answer (c). Malonic acid decarboxylates; maleic (cis) acid dehydrates to maleic anhydride; succinic acid forms succinic anhydride. Fumaric acid is trans, so its two CO2H groups cannot reach each other to form an anhydride and it is stable to moderate heating.
Teacher's Note: Anhydride formation needs cis geometry; trans fumaric acid cannot cyclise.
Exam Note: Trans diacid cannot form cyclic anhydride.
Question 31. Br–CH2–(CH2)n–CH2–Br (as drawn: two carbons outside the bracket and n inside) + CH2(CO2Et)2 (NaOEt/EtOH) → cyclic product. At which n does a six-membered ring form? (a) n = 2; (b) n = 3; (c) n = 5; (d) n = 6.
Solution. Answer (b). The ring contains the malonate carbon plus all CH2 groups of the dibromide: 1 + (2 + n). For a six-membered ring, 3 + n = 6, so n = 3.
Teacher's Note: Ring size = malonate carbon plus every carbon of the dibromide chain.
Exam Note: Count ring atoms including the malonate carbon.
Question 32. N-phenylglutarimide (six-membered ring, N–C6H5, two C=O flanking N) + LiAlH4 (excess), then H2O → ? (a) HOCH2(CH2)3CH2OH-type diol; (b) aniline; (c) N-phenylpiperidine; (d) N-phenyl-2,6-dihydroxypiperidine.
Solution. Answer (c). Excess LiAlH4 reduces amides and imides completely, converting each C=O to CH2. N-Phenylglutarimide therefore gives N-phenylpiperidine.
Teacher's Note: LiAlH4 reduces amide C=O to CH2 (amine), unlike esters.
Exam Note: Amides go to amines with LiAlH4.
Question 33. Cyclohexane-1,1,2-tricarboxylic acid (two CO2H on one ring carbon, one on the adjacent carbon) → (Δ, −CO2) → (Δ, −H2O). Product: (a) cis-anhydride; (b) trans-anhydride; (c) both (a) and (b); (d) monobasic acid.
Solution. Answer (a), as given in the book's key. The gem-diacid loses one CO2 to give cyclohexane-1,2-dicarboxylic acid; heating then removes water to give the cyclic anhydride, taken here as the cis-anhydride (hexahydrophthalic anhydride). Flagged: the trans diacid can also cyclise in principle, so a human check of the intended stereochemistry is advised.
Teacher's Note: Malonic-type diacid loses CO2, then the 1,2-diacid dehydrates to anhydride.
Exam Note: Decarboxylate gem-diacid first, then dehydrate.
Question 34. 4-(p-Tolyl)-4-oxobutanoic acid, p-CH3C6H4COCH2CH2CO2H; reagents reagents (i) EtOH/HCl, (ii) EtMgBr, (iii) H+/Δ → (A). Options: (a) ketone converted to tertiary alcohol (aryl, OH, Et) with CO2Et retained; (b) the ethyl ester only, ketone unchanged; (c) methyl ketone product; (d) a tertiary alcohol with CH3 and acetyl.
Solution. Answer (a), as in the book's key. The acid is esterified (i). EtMgBr adds to the more reactive ketone carbonyl to give a tertiary alkoxide (ii); work-up gives the tertiary alcohol, which keeps the ethyl ester (a). Flagged: heating with H+ could dehydrate the alcohol, but the book's answer is (a).
Teacher's Note: Grignard prefers the ketone over the ester; esterify the acid first.
Exam Note: Protect acid as ester before using Grignard.
Question 35. Triglyceride (glycerol esterified with three fatty acids RCO2, R′CO2, R″CO2) + 3 NaOH → (A) + salts of fatty acids (soap). Product (A): (a) ethylene glycol; (b) glycerol; (c) glyceryl trinitrate; (d) cumene hydroperoxide.
Solution. Answer (b). Saponification of a fat/oil cleaves the three ester bonds, giving glycerol (propane-1,2,3-triol) and three sodium carboxylate soap molecules.
Teacher's Note: Saponification of a triglyceride always gives glycerol plus soap.
Exam Note: Fat + NaOH gives soap and glycerol.
Question 36. (d)-CH3CH(OAc)CH2CH3 (2-butyl acetate, dextrorotatory) + HO− → product. (a) (d)-2-butanol; (b) (l)-2-butanol; (c) racemic (d) and (l) mixture; (d) 2-methylpropene.
Solution. Answer (a). Basic ester hydrolysis breaks the acyl–oxygen bond, so the C–O bond at the stereocentre is never broken. The configuration is retained and the alcohol has the same spatial arrangement as the original (the 'd' label is given in the book's answer).
Teacher's Note: Acyl–O cleavage leaves the chiral carbon untouched: retention.
Exam Note: Retention of configuration in ester hydrolysis.
Question 37. Cinnamic acid, Ph–CH=CH–CO2H, with (i) SOCl2, (ii) cyclopropylamine → (A). (a) Ph–CH=CH–CH2–C(=O)... homologated amide; (b) Ph–CH=CH–C(=O)–NH–cyclopropyl; (c) cinnamaldehyde; (d) Ph–CH=CH–NH–cyclopropyl.
Solution. Answer (b). SOCl2 gives cinnamoyl chloride; cyclopropylamine then substitutes Cl to give N-cyclopropylcinnamamide. The C=C and ring are untouched.
Teacher's Note: Acid, then acid chloride, then amine gives amide; alkene unaffected.
Exam Note: Two-step amide synthesis via acid chloride.
Question 38. Benzoyl chloride + morpholine (secondary amine with ring O) → (A) (major). (a) an O-acyl oxonium-type salt; (b) N-benzoylmorpholine; (c) a similarly drawn cyclic amide; (d) benzamide (Ph–CO–NH2).
Solution. Answer (b), N-benzoylmorpholine, Ph–C(=O)–N(CH2CH2)2O. The nitrogen of morpholine is the nucleophile and displaces chloride; HCl is lost. (Per the book's key.)
Teacher's Note: Secondary amines acylate on nitrogen to give tertiary amides.
Exam Note: N is the nucleophilic site, not O.
Question 39. CH2=CH–CO2CH3 + n-propanol (conc. HCl, equilibrium) → CH2=CH–CO2CH2CH2CH3 + MeOH. This is an example of: (a) esterification; (b) saponification; (c) hydrolysis; (d) trans-esterification.
Solution. Answer (d). An ester reacts with another alcohol and exchanges its alkoxy group (OMe replaced by OPr) under acid catalysis: transesterification. No water or carboxylic acid is involved, and no base is used for saponification.
Teacher's Note: Ester + alcohol swapping alkoxy group is transesterification.
Exam Note: Ester to a different ester: transesterification.
Question 40. CH3COCl + NH3 → Intermediate → product. Which is the intermediate? (a) CH3NH3+; (b) CH3C+=O; (c) CH3C(OH)(Cl)NH3+-type protonated gem compound; (d) the tetrahedral intermediate CH3–C(O−)(Cl)–N+H3.
Solution. Answer (d). Ammonia adds to the carbonyl carbon, with the C=O π electrons moving onto oxygen. This tetrahedral addition intermediate (O−, Cl, N+H3, CH3 on carbon) then reforms C=O by expelling Cl−, giving acetamide after proton loss.
Teacher's Note: Addition–elimination: tetrahedral intermediate carries O-minus and N-plus.
Exam Note: Draw the addition step first.
Question 41. Coconut oil triglyceride (glycerol tri-ester, R = long chain) + NaOH, H2O, 100 °C (several hours) → Product. (a) RCO2Na; (b) glycerol (propane-1,2,3-triol); (c) both (a) and (b); (d) none of these.
Solution. Answer (c). Saponification cleaves all three ester bonds, giving three RCO2Na (soap) and glycerol.
Teacher's Note: Saponification yields both soap and glycerol.
Exam Note: Both products must be named.
Question 42. The reaction of sodium acetate with acetyl chloride proceeds through which mechanism? Options (a)–(d) show curved arrows for CH3CO2− + CH3COCl; the correct one (c) shows the carboxylate oxygen attacking the carbonyl carbon of CH3COCl, with the C=O π-bond electrons moving to oxygen (nucleophilic addition to the acyl carbon).
Solution. Answer (c). The nucleophile (acetate O−) attacks the electrophilic carbonyl carbon, the C=O π pair goes to oxygen, then chloride leaves to give acetic anhydride. Attack on Cl or on the carbonyl oxygen (other options) is wrong.
Teacher's Note: Nucleophile attacks carbonyl carbon, never Cl or carbonyl O.
Exam Note: Arrow goes from O-minus to carbonyl carbon.
Question 43. Major product of CH3COCl + H2S: (a) CH3C(OH)(SH)Cl; (b) CH3C(=O)–SH (thioacetic acid); (c) CH3C(=S)Cl; (d) (CH3CO)2S.
Solution. Answer (b). H2S is the sulfur analogue of water; it substitutes Cl by SH, giving thioacetic acid, CH3COSH, with loss of HCl. (a) is only an unstable tetrahedral intermediate.
Teacher's Note: H2S acts like water: acyl substitution gives thioacid.
Exam Note: Replace Cl by SH.
Question 44. Succinic anhydride + CH3NH2 (Δ) → product. (a) N-methylsuccinimide; (b) an N-methyl imine of the lactone; (c) HO2C–CH2CH2–CONHCH3; (d) CH3NH–CO–CH2CH2–CONHCH3.
Solution. Answer (c), as in the book's key. The amine opens the anhydride to the amic acid (N-methylsuccinamic acid) with one amide and one free CO2H. Note: much stronger heating (about 200 °C) would cyclise this to N-methylsuccinimide (a); flagged for a human check.
Teacher's Note: Anhydride plus amine first gives amide-acid; imide needs further heating.
Exam Note: Ring-opening gives amic acid with free CO2H.
Question 45. Ethanoic acid + 3-methyl-1-butanol (traces H2SO4, equilibrium) → (A). Compound (A) is: (a) isopropyl acetate; (b) 3-methylbutyl (isoamyl) acetate; (c) n-butyl acetate; (d) tert-butyl-type acetate.
Solution. Answer (b). Fischer esterification gives CH3CO–O–CH2CH2CH(CH3)2, isoamyl acetate (banana oil).
Teacher's Note: Ester name comes from the alcohol alkyl group plus acetate.
Exam Note: Alcohol chain 3-methylbutyl stays intact.
Question 46. Phthalic anhydride → (PCl5) A → (LiAlH4) B → (PCC) C → (HO−, Δ) D. Compound D: (a) 2-(hydroxymethyl)benzoate anion (CH2OH and CO2− ortho); (b) phthalate dianion; (c) o-xylene-α,α′-diol; (d) benzene-1,2-dimethoxide.
Solution. Answer (a). PCl5 gives phthaloyl chloride (A); LiAlH4 gives benzene-1,2-dimethanol (B); PCC gives phthalaldehyde (C). Phthalaldehyde has no α-H, so with hydroxide it undergoes an intramolecular Cannizzaro reaction: one CHO is oxidised to CO2− and the other reduced to CH2OH.
Teacher's Note: Dialdehyde without α-H undergoes intramolecular Cannizzaro in base.
Exam Note: Name the Cannizzaro step to earn the mark.
Question 47. Which of the following will undergo decarboxylation on heating? (1) cyclohexane-1,3-dione; (2) methyl 2-oxocyclohexanecarboxylate (ester); (3) 2-oxocyclohexanecarboxylic acid (β-keto acid); (4) cyclohexane-1,2-dicarboxylic acid. (a) 2 and 3; (b) 3 and 4; (c) 3 only; (d) 1 and 4.
Solution. Answer (c). Only a β-keto acid (3) decarboxylates readily on heating through a cyclic transition state. (1) has no CO2H, (2) is an ester, and (4) is a vicinal diacid that dehydrates to an anhydride instead.
Teacher's Note: Need a free CO2H beta to a carbonyl for facile loss of CO2.
Exam Note: Free acid plus β-carbonyl is the test.
Question 48. Which is not an intermediate in the generally accepted mechanism of CF3CO2H + (CH3)2CHOH (H2SO4) → CF3CO2CH(CH3)2 + H2O? (a) protonated acid CF3C(=+OH)OH; (b) anionic tetrahedral intermediate CF3C(O−)(OH)(OCH(CH3)2); (c) neutral-OH tetrahedral intermediate with +OH2; (d) neutral tetrahedral intermediate with two OH and OR.
Solution. Answer (b). Under acid conditions all intermediates are neutral or cationic (protonated acid, tetrahedral intermediates with OH/OH2+). An anionic tetrahedral intermediate with O− belongs to base-mediated mechanisms and is not accepted in acid-catalysed Fischer esterification.
Teacher's Note: No O-minus species in strongly acidic Fischer esterification.
Exam Note: Spot the anionic intermediate in acid conditions.
Question 49. RO–CH2CH2–CO2H (alkoxy acid, as drawn) + 3 eq. EtOH, dry HCl gas → (A) (major). (a) RO–CH2CH2–CO2R; (b) RO–CH2CH2–CO2Et; (c) EtO–CH2CH2–CO2Et; (d) a carbonate R–O–C(=O)–O–Et.
Solution. Answer (b). Dry HCl/EtOH esterifies only the carboxylic acid to the ethyl ester. The ether linkage (RO–C) is stable to these conditions and is not exchanged.
Teacher's Note: Fischer esterification affects the acid only; ethers survive.
Exam Note: Only CO2H converts; ether unchanged.
Question 50. Identify compound C: (CH3)2CHCH2C≡N → (HCl, H2O) A → (1. LiAlH4, 2. H2O) B → (PCC, CH2Cl2) C. (a) (CH3)2CHCOCH3; (b) (CH3)2CHCH2COOH; (c) (CH3)2CHCH2CHO; (d) (CH3)2CHCH2CH2OH.
Solution. Answer (c). Nitrile hydrolysis gives 3-methylbutanoic acid (A); LiAlH4 reduces it to 3-methylbutan-1-ol (B); PCC oxidises the primary alcohol to the aldehyde, 3-methylbutanal (C).
Teacher's Note: PCC stops at aldehyde, avoiding over-oxidation to the acid.
Exam Note: Nitrile, acid, alcohol, then aldehyde.
Question 51. Toluene → (Br2, light) A → (1. KCN, 2. H3O+, heat) B. Final product B: (a) o-toluic acid; (b) benzoic acid; (c) m-toluic acid; (d) phenylacetic acid, C6H5CH2CO2H.
Solution. Answer (d). Light brominates the side chain (free-radical) giving benzyl bromide (A). KCN gives benzyl cyanide, which is hydrolysed to phenylacetic acid, adding one carbon.
Teacher's Note: Light means side-chain bromination; cyanide adds one carbon.
Exam Note: Radical bromination at benzylic carbon.
Question 52. Which undergoes decarboxylation most readily on heating? (a) PhCO–CH2CH2–CO2H (γ-keto acid); (b) Ph–CH(CO2H)–CH2–CO–Et (γ-keto acid); (c) a keto acid with CO2H and C=O separated by a longer chain on a ring; (d) Ph–CH(CO2H)–CO–CH2CH2CH3 (β-keto acid).
Solution. Answer (d). Only (d) has the carbonyl β to the CO2H (a β-keto acid), which decarboxylates via a six-membered cyclic transition state; the phenyl on the α carbon further stabilises the enol formed. In (a)–(c) the carbonyl is γ or farther, so decarboxylation is not facile.
Teacher's Note: Beta-keto acid decarboxylation uses a six-membered cyclic transition state.
Exam Note: Locate the carbonyl: it must be beta.
Question 53. CH3CH2CH2Br → (NaCN) X → (H3O+, heat) Y → (CH3CH2OH, H+) Z. Compound Z: (a) CH3CH=CHCOOH; (b) CH3CH2CH2CH=NOCH2CH3; (c) CH3CH2CH2CH(OCH2CH3)2; (d) CH3CH2CH2COOCH2CH3.
Solution. Answer (d). X = butanenitrile; Y = butanoic acid; Z = ethyl butanoate (Fischer esterification).
Teacher's Note: Cyanide adds one carbon: propyl bromide gives butanoic acid derivatives.
Exam Note: Count carbons: 3 plus 1 equals 4.
Question 54. Tetracyano compound: 5,6,7,8-tetrahydronaphthalene-type bicycle (ring-fusion C=C) bearing two gem-dicyano carbons on adjacent ring positions → (H3O+/Δ) (A). Options: (a) saturated cyclic anhydride (no C=C); (b) anhydride with a shifted C=C; (c) the vicinal diacid with the fusion C=C; (d) the cyclic anhydride retaining the fusion C=C.
Solution. Answer (d). Hydrolysis converts the four CN groups to four CO2H (two gem-diacids). Each gem-diacid loses one CO2, leaving a vicinal diacid on adjacent carbons, which dehydrates on heating to the five-membered cyclic anhydride. The tetrasubstituted fusion C=C is unaffected.
Teacher's Note: Gem-diacids lose CO2, then 1,2-diacid dehydrates to cyclic anhydride.
Exam Note: Tally: hydrolyse, decarboxylate, dehydrate.
Question 55. CH3–CH=CH–CH2–CO2H (β,γ-unsaturated acid) → (Δ) (X) (major). (a) CH3CH=CHCH3; (b) isobutene; (c) CH3CH2CH=CH2; (d) CH3CH=CH2.
Solution. Answer (c). A β,γ-unsaturated acid decarboxylates through a six-membered cyclic transition state: the acid H moves to the γ-carbon, the double bond shifts to C2=C3 and CO2 leaves. This gives CH2=CH–CH2CH3, 1-butene.
Teacher's Note: Cyclic six-membered TS shifts the double bond as CO2 leaves.
Exam Note: Move double bond by one position.
Question 56. HOOC–(CH2)n–COOH on heating: at what n will the compound not evolve CO2? (a) n = 5; (b) n = 4; (c) n = 2; (d) n = 1.
Solution. Answer (c). n = 1 is malonic acid (loses CO2 to give acetic acid); n = 4 (adipic) gives cyclopentanone + CO2 + H2O (Ba2+ salt/heat); n = 5 (pimelic) gives cyclohexanone. n = 2 is succinic acid, which instead loses water to form succinic anhydride, so no CO2 is evolved.
Teacher's Note: Blanc rule: 1,4-diacids give anhydrides, 1,6 and 1,7 give cyclic ketones.
Exam Note: Succinic acid dehydrates; no CO2 is released.
Question 57. HOOC–(CH2)n–COOH: if n = 4 the dicarboxylic acid is known as: (a) malonic acid; (b) succinic acid; (c) adipic acid; (d) oxalic acid.
Solution. Answer (c). n = 4 gives HOOC(CH2)4COOH, hexanedioic acid = adipic acid (malonic n = 1, succinic n = 2, oxalic n = 0).
Teacher's Note: Memorise: oxalic, malonic, succinic, glutaric, adipic.
Exam Note: Match n to common dicarboxylic acid names.
Question 58. A norbornane-type bicyclic compound carrying two lactone/anhydride ring junctions + 2 H2O → (A). Product (A): (a) hydroxy/methyl diacid mixture; (b) keto-hydroxy diacid; (c) the diol-diacid (two OH and two CO2H on the bicyclic skeleton); (d) a diol-dialdehyde.
Solution. Answer (c), per the book's key. Two moles of water hydrolyse both the ester (lactone) and anhydride-type acyl links of the bicyclic skeleton, producing the compound with two free OH groups and two CO2H groups. (Structure not drawn here; answer taken from the key.)
Teacher's Note: Hydrolysis of cyclic esters/anhydrides releases hydroxyl and acid groups.
Exam Note: Each water opens one acyl link.
Question 59. Compound A: H2/Pt (2H2) → decalin; KMnO4 (warm conc.) → cis-cyclohexane-1,2-dicarboxylic acid + oxalic acid. Identify A. Options: (a)–(d) are bicyclic dienes with the double bonds at different positions; correct (b) has a conjugated diene confined to one ring, C1=C2–C3=C4.
Solution. Answer (b). Two moles of H2 to decalin show two C=C. Oxidative cleavage of a ring diene C1=C2–C3=C4 gives COOH at C1 and C4 (still attached to the ring-fusion carbons, giving the cis-1,2-diacid on the other ring) and a central C2–C3 piece, HOOC–COOH (oxalic acid). Hence A is the 1,3-diene in one ring of cis-hexahydronaphthalene.
Teacher's Note: Oxalic acid signals an intact C=C–C=C diene being cleaved.
Exam Note: Work backwards from oxalic acid fragment.
Question 60. 1,1-Cyclopentanedicarboxylic acid with CH3 groups on C2 (hashed) and C5 (wedge), i.e. trans-2,5-dimethyl. How many products form on decarboxylation? (a) 0; (b) 1; (c) 2; (d) 3.
Solution. Answer (b). Loss of one CO2 gives 2,5-dimethylcyclopentanecarboxylic acid. The ring has trans methyls (C2-symmetric), so placing CO2H cis to one methyl and trans to the other gives the same compound either way: only one product.
Teacher's Note: Trans-dimethyl ring is C2-symmetric, so both faces give one compound.
Exam Note: Check symmetry before counting stereoisomers.
Question 61. A cyclopentane with two CH3 groups and two CO2H groups on a ring carbon bearing H atoms as drawn (Δ, −CO2) → product. (a) one stereoisomer of the monoacid; (b) the other stereoisomer of the monoacid; (c) both (a) and (b); (d) none of these.
Solution. Answer (c), per the book's key. The decarboxylation of the gem-diacid leaves a new stereocentre at the carbon that kept one CO2H; the proton can be delivered from either face, so both diastereomers (a) and (b) are formed.
Teacher's Note: Gem-diacid decarboxylation creates a new stereocentre; both faces react.
Exam Note: Both configurations are formed, so both products.
Question 62. cis-3,4-Dibromocyclopentane-1,1-dicarboxylic acid → (Δ) CO2 + x; the trans compound (one Br shown, CO2H groups on same carbon) → (Δ) CO2 + y. The numbers of possible products for x and y are: (a) 1, 1; (b) 1, 2; (c) 2, 1; (d) 2, 2.
Solution. Answer (c): x = 2, y = 1, per the book's key. For the cis (meso) dibromide, the new stereocentre can have CO2H cis or trans to the Br atoms, giving two products. For the trans compound only one product is obtained according to the key (structure of the second compound is not fully legible in the scan).
Teacher's Note: Count stereocentres created on decarboxylation and use symmetry.
Exam Note: State symmetry to justify the number of products.
Question 63. Benzyl bromide, (1) potassium phthalimide, DMF, (2) HO−/H2O → (A) (81%). Product (A): (a) aniline; (b) benzylamine (PhCH2NH2); (c) PhCH2NHCO2H; (d) PhCH2NHCHO.
Solution. Answer (b). Gabriel synthesis: phthalimide anion displaces Br (SN2) to give N-benzylphthalimide; basic hydrolysis releases the primary amine, benzylamine, plus phthalate.
Teacher's Note: Gabriel synthesis gives pure primary amine, no over-alkylation.
Exam Note: Name it: Gabriel synthesis of primary amine.
Question 64. Which of the following pairs is a C2-epimer? (a) D-glucose, D-maltose; (b) D-glucose, D-mannose; (c) D-allose, D-ribose; (d) D-glucose, D-arabinose.
Solution. Answer (b). Epimers differ in configuration at one stereocentre only. D-Glucose and D-mannose differ only at C2, so they are C2-epimers.
Teacher's Note: Epimers differ at a single carbon; glucose/mannose at C2.
Exam Note: Learn glucose/mannose C2, glucose/galactose C4.
Question 65. Total number of enol possible (including stereoisomers) for the compound formed in CH3MgBr + CH3CH2C(=O)Cl →: (a) 2; (b) 3; (c) 4; (d) 5.
Solution. Answer (b). The Grignard (1 eq.) gives butan-2-one, CH3COCH2CH3. Its enols are CH2=C(OH)CH2CH3 (1) and CH3C(OH)=CHCH3 as cis and trans isomers (2), a total of 3.
Teacher's Note: Unsymmetrical ketone: count both enol directions plus E/Z.
Exam Note: Add geometric isomers of the internal enol.
Question 66. Spiro-dioxolane ketal of a six-membered lactone (a δ-lactone ring containing C=O and ring O, with a ketal carbon) + H3O+, H2O → ? Options: (a) a hydroxy-acid with a terminal CO2H and OH only; (b) a ketal-protected hydroxy acid; (c) a hydroxy keto-acid (HO–CO–CH2–CO–CH2CH2OH-type, with two C=O and OH); (d) a ketal-protected acid with ethyl.
Solution. Answer (c), per the book's key. Aqueous acid removes the ethylene glycol ketal to unmask the ketone and also hydrolyses the lactone, so the product is the open-chain hydroxy keto-acid (c). (Structure not redrawn; answer from the key.)
Teacher's Note: Aqueous acid cleaves both ketal and lactone.
Exam Note: Deprotect ketal and open lactone.
Question 67. 2-(1-Hydroxyethyl)-2-carboxycyclopentanone (a β-keto acid with CH(OH)CH3 on the same carbon) → (i) KBrO3, Δ; (ii) H+ → (X) → (Δ) (Y). Product Y: (a) 2-(1-hydroxyethyl)cyclopentanone; (b) cyclopentanone-2-carboxylic acid; (c) cyclopentanone; (d) methylcyclopentane.
Solution. Answer (c), per the book's key. KBrO3 oxidises the secondary alcohol to a ketone, giving a 2-acetyl-2-carboxy-cyclopentanone. Acid cleavage (retro-Claisen-type loss of the acetyl group) and decarboxylation of the resulting β-keto acid on heating then give cyclopentanone. Flagged: mechanism rationalised from the key.
Teacher's Note: Oxidise alcohol, lose acetyl and CO2, ending at the simple ketone.
Exam Note: Track each carbon lost to reach cyclopentanone.
Question 68. trans-3-Methylcyclohexane-1-carboxamide and a 15N-labelled 3-ethylcyclohexane-1-carboxamide (hashed C2H5) with OH−/Br2 (intramolecular migration) → products. Options (a)–(d) differ in stereochemistry and where 15N sits; correct (b): the two amines keep their configurations and each retains its own nitrogen label.
Solution. Answer (b). Hofmann rearrangement is intramolecular with retention of configuration at the migrating carbon. Each amide gives its own amine (the 15N stays in the Et compound's amine, none crosses over), so (b) is correct.
Teacher's Note: Hofmann: R migrates with retention, no crossover of N label.
Exam Note: Retention plus intramolecular, so no label scrambling.
Question 69. CH3CH2CH(OH)CH(CH3)2 + CH3COCl (base) → CH3CH2CH(OCOCH3)CH(CH3)2 + HCl. If the alcohol is the pure R-isomer, the product would: (a) have inverted configuration at the chiral atom; (b) be a racemic mixture; (c) have the same configuration at the chiral atom; (d) be optically inactive.
Solution. Answer (c). Acylation occurs at the O–H oxygen; the C–O bond of the stereocentre is not broken, so the configuration is retained (the descriptor may be R or S depending on CIP priorities, but the spatial arrangement is unchanged).
Teacher's Note: O-acylation leaves the stereocentre bonds intact.
Exam Note: Retention: no bond broken at the chiral carbon.
Question 70. Order of SN1 reactivity in aqueous acetic acid for: (1) CH3COCH2Cl; (2) CH3CH2CH2Cl; (3) (CH3)3CCl. Options: (a) 1 > 2 > 3; (b) 1 > 3 > 2; (c) 3 > 2 > 1; (d) 3 > 1 > 2.
Solution. Answer (c): 3 > 2 > 1. The tertiary halide gives a stable tertiary carbocation, so it is fastest. The primary propyl halide is slow. The α-keto halide (1) is slowest because the C=O destabilises an adjacent carbocation.
Teacher's Note: SN1 rate follows carbocation stability; α-C=O destabilises it.
Exam Note: Carbocation stability decides SN1 order.
Level 2
Question 1. Match Column (I) with Column (II) (matrix). Column (I), reaction on heating: (a) Fischer projection CH3–C(CO2H)2–CH(D)–Ph (gem-diacid, next carbon bearing H, D and Ph); (b) CH3–C(CO2H)2–Et; (c) 4-methylcyclohexane-1,1-dicarboxylic acid; (d) cis-cyclohexane-1,2-dicarboxylic acid. Column (II), products formed: (p) diastereomers; (q) racemic mixture; (r) meso compound; (s) CO2 gas will evolve.
Solution. Answer (from key): a – p, s; b – q, s; c – p, s; d – r. Working: (a) the gem-diacid loses CO2 to give CH3CH(CO2H)–CH(D)Ph with two stereocentres, formed as diastereomers (p), with CO2 (s). (b) Loss of CO2 gives 2-methylbutanoic acid, one new stereocentre, formed as a racemic mixture (q), with CO2 (s). (c) Decarboxylation gives cis- and trans-4-methylcyclohexanecarboxylic acid, diastereomers (p), with CO2 (s). (d) A cis-1,2-diacid does not decarboxylate but dehydrates to the cyclic anhydride, which is meso (r).
Teacher's Note: Gem-diacids lose CO2; cis-1,2-diacid dehydrates to meso anhydride instead.
Exam Note: Decide stereochemistry of each decarboxylation product.
Subjective Problems
Question 1. Cyclohexanone with CO2H groups as drawn: two on C2, two on C6 and two on C4 (six CO2H in all), heated → (X) mol of CO2. Also (Y), a β-keto acid, on heating gives PhCH2COCH3 (phenylacetone); (Y) is counted including stereoisomers. Value of (X + Y) will be:
Solution. Answer (from key): 8. X: each of the three gem-diacids loses one CO2 (3); the two resulting CO2H groups at C2 and C6 are β to the ring C=O and also decarboxylate (2); the C4 acid is γ, so it stays. X = 5. Y: the β-keto acids that give PhCH2COCH3 are CH3COCH(Ph)CO2H (one stereocentre, 2 stereoisomers) and HO2CCH2COCH2Ph (achiral, 1). Y = 3. X + Y = 8.
Teacher's Note: Count gem-diacid losses, then β-keto acid losses; Y counts enantiomers too.
Exam Note: Show X and Y separately, then add.
JEE Mathematics: MS Chauhan Solutions for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 9 Carboxylic Acid And Their Derivatives
Complete Math Solutions for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 9 Carboxylic Acid And Their Derivatives
Explore reliable mathematical solutions for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 9 Carboxylic Acid And Their Derivatives tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Concept-Driven Math Answers
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Explore More Study Resources for JEE Math
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.