IE Irodov Solutions for JEE Physics: Chapter 39 Nuclear Reactions
Access comprehensive textbook solutions for Chapter 39 Nuclear Reactions using the IE Irodov reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Practice JEE Physics Solutions: Chapter 39 Nuclear Reactions
Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Nuclear Reactions - Questions 249 to 290
Nuclear Reactions (Part - 1)
Question 249. An alpha-particle with kinetic energy Tα = 7.0 MeV is scattered elastically by an initially stationary Li6 nucleus. Find the kinetic energy of the recoil nucleus if the angle of divergence of the two particles is θ = 60°.
Solution. Initial momentum of the α-particle is √(2mTα) i (i is a unit vector in the incident direction). Let the final momenta be pα and pLi. Conservation of momentum gives pα + pLi = √(2mTα) i.
Squaring: pα2 + pLi2 + 2pαpLi cos Θ = 2mTα (1), where Θ is the angle between pα and pLi.
By energy conservation pα2/2m + pLi2/2M = Tα (m and M are the masses of the α-particle and Li6), so pα2 + (m/M)pLi2 = 2mTα (2).
Subtracting (2) from (1): pLi[(1 − m/M)pLi + 2pα cos Θ] = 0. Thus, if pLi ≠ 0, pα = −½(1 − m/M) pLi sec Θ.
Since pα and pLi are magnitudes (positive), we must have −1 ≤ cos Θ < 0 if m < M. Substituting into the energy equation:
(pLi2/2M)[1 + (M/4m)(1 − m/M)2 sec2Θ] = Tα.
Hence the recoil energy of the Li nucleus is
pLi2/2M = Tα / [1 + ((M − m)2/4mM) sec2Θ].
As pointed out above, Θ cannot be 60° (cos Θ must be negative). Taking Θ = 120°, we get the recoil energy of Li = 6 MeV.
Teacher's Note: Elastic collision with a heavier target forces an obtuse divergence angle; Θ = 120° is the consistent value.
Exam Note: State both conservation laws; show cos Θ < 0.
Question 250. A neutron collides elastically with an initially stationary deuteron. Find the fraction of the kinetic energy lost by the neutron (a) in a head-on collision; (b) in scattering at right angles.
Solution. (a) In a head-on collision, with m and M the neutron and deuteron masses, momentum conservation gives √(2mT) = pd + pn and energy conservation gives T = pd2/2M + pn2/2m, where pd and pn are the momenta after the collision. Squaring the momentum equation and using the energy equation (pn2 + (m/M)pd2 = 2mT) we get pn = −½(1 − m/M)pd. Going back to energy conservation:
(pd2/2M)[1 + (M/4m)(1 − m/M)2] = T, so pd2/2M = [4mM/(m + M)2] T.
This is the energy lost by the neutron. So the fraction of energy lost is η = 4mM/(m + M)2 = 8/9 (taking M = 2m).
(b) Here the neutron is scattered by 90°. From the diagram, pd = √(2mT) i − pn j, so by energy conservation
(pn2 + 2mT)/2M + pn2/2m = T, or (pn2/2m)(1 + m/M) = T(1 − m/M), or pn2/2m = [(M − m)/(M + m)] T.
The energy lost by the neutron is then T − pn2/2m = [2m/(M + m)] T, so the fraction of energy lost is η = 2m/(M + m) = 2/3.
Teacher's Note: Use η = 4mM/(m+M)² for head-on; for 90° scattering the components give η = 2m/(M+m).
Exam Note: Mass ratio M = 2m; quote 8/9 and 2/3.
Question 251. Find the greatest possible angle through which a deuteron is scattered as a result of elastic collision with an initially stationary proton.
Solution. Let M be the deuteron mass and m the proton mass. From conservation of momentum, √(2MT) i = pd + pp, or pp2 = 2MT + pd2 − 2√(2MT) pd cos θ, where θ is the deuteron scattering angle.
From energy conservation T = pd2/2M + pp2/2m, so pp2 = 2mT − (m/M)pd2. Hence
pd2(1 + m/M) − 2√(2MT) pd cos θ + 2(M − m)T = 0.
For real roots: 4(2MT)cos2θ − 4·2(M − m)T(1 + m/M) ≥ 0, i.e. cos2θ ≥ 1 − m2/M2. Hence sin2θ ≤ m2/M2, i.e. θ ≤ sin-1(m/M).
For deuteron-proton scattering, m/M = 1/2, so θmax = 30°.
Teacher's Note: A quadratic in pd must have real roots; the discriminant gives sin θ ≤ m/M.
Exam Note: Give θmax = sin⁻¹(1/2) = 30°.
Question 252. Assuming the radius of a nucleus to be equal to R = 0.13 ∛A pm, where A is its mass number, evaluate the density of nuclei and the number of nucleons per unit volume of the nucleus.
Solution. This problem has a misprint. Actually the radius R of a nucleus is given by R = 1.3 ∛A fm, where 1 fm = 10-15 m.
Then the number of nucleons per unit volume is A/[(4π/3)R3] = (3/4π) × (1.3)-3 × 1039 cm-3 = 1.09 × 1038 per cm3.
The corresponding mass density is (1.09 × 1038 × mass of a nucleon) per cm3 = 1.82 × 1011 kg/cm3.
Teacher's Note: Density is independent of A because R3 ∝ A; correct the misprint to 1.3 fm.
Exam Note: Convert fm to cm carefully; quote 1.09×10³⁸ cm⁻³.
Question 253. Write missing symbols, denoted by x, in the following nuclear reactions: (a) B10(x, α)Be8; (b) O17(d, n)x; (c) Na23(p, x)Ne20; (d) x(p, n)Ar37.
Solution. (a) The particle x must carry two nucleons and a unit of positive charge. The reaction is B10(d, α)Be8.
(b) The particle x must contain a proton in addition to the constituents of O17. Thus the reaction is O17(d, n)F18.
(c) The particle x must carry nucleon number 4 and two units of positive charge. Thus x = α and the reaction is Na23(p, α)Ne20.
(d) The particle x must carry mass number 37 and have one unit less of positive charge than Ar. Thus x = Cl37 and the reaction is Cl37(p, n)Ar37.
Teacher's Note: Balance mass number and charge on both sides of each reaction.
Exam Note: Show A and Z balance for each part.
Question 254. Demonstrate that the binding energy of a nucleus with mass number A and charge Z can be found from Eq. (6.6b).
Solution. From the basic formula, Eb = ZΔH + (A − Z)Δn − Δ, where we define the mass excesses ΔH = mH − 1 amu, Δn = mn − 1 amu, Δ = M − A amu (M being the atomic mass of the nucleus considered). Then clearly Eb = ZΔH + (A − Z)Δn − Δ.
Teacher's Note: Substitute masses as (A + Δ); the A terms cancel, leaving mass excesses.
Exam Note: Define Δ = M − A first.
Question 255. Find the binding energy of a nucleus consisting of equal numbers of protons and neutrons and having the radius one and a half times smaller than that of Al27 nucleus.
Solution. Since R ∝ A1/3, the mass number of the given nucleus must be 27/(3/2)3 = 8. Thus the nucleus is Be8. Then the binding energy is
Eb = 4 × 0.00867 + 4 × 0.00783 − 0.00531 amu = 0.06069 amu = 56.5 MeV, using 1 amu = 931 MeV.
Teacher's Note: R ∝ A1/3 fixes A = 8, so N = Z = 4 (Be-8).
Exam Note: Use mass excesses; multiply amu by 931 MeV.
Question 256. Making use of the tables of atomic masses, find: (a) the mean binding energy per one nucleon in O16 nucleus; (b) the binding energy of a neutron and an alpha-particle in a B11 nucleus; (c) the energy required for separation of an O16 nucleus into four identical particles.
Solution. (a) The total binding energy of the O16 nucleus is Eb = 8 × 0.00867 + 8 × 0.00783 + 0.00509 amu = 0.13709 amu = 127.6 MeV. So the binding energy per nucleon is 7.98 MeV/nucleon.
(b) The binding energy of a neutron in B11 = B.E. of B11 − B.E. of B10 (since on removing a neutron from B11 we get B10) = Δn − ΔB11 + ΔB10 = 0.00867 − 0.00930 + 0.01294 = 0.01231 amu = 11.46 MeV.
The binding energy of an α-particle in B11 = B.E. of B11 − B.E. of Li7 − B.E. of α (since on removing an α from B11 we get Li7) = −ΔB11 + ΔLi7 + Δα = −0.00930 + 0.01601 + 0.00260 = 0.00931 amu = 8.67 MeV.
(c) This energy is [B.E. of O16] − 4(B.E. of α-particle) = −ΔO16 + 4Δα = 4 × 0.00260 + 0.00509 = 0.01549 amu = 14.42 MeV.
Teacher's Note: Separation energy = difference of total binding energies of parent and fragments.
Exam Note: Show mass-excess arithmetic; convert with 931 MeV/amu.
Question 257. Find the difference in binding energies of a neutron and a proton in a B11 nucleus. Explain why there is the difference.
Solution. B.E. of a neutron in B11 − B.E. of a proton in B11 = (Δn − ΔB11 + ΔB10) − (Δp − ΔB11 + ΔBe10) = Δn − Δp + ΔB10 − ΔBe10 = 0.00867 − 0.00783 + 0.01294 − 0.01354 = 0.00024 amu = 0.223 MeV.
The difference in binding energy is essentially due to the Coulomb repulsion between the proton and the residual nucleus Be10 which together constitute B11.
Teacher's Note: The proton is bound less strongly because of Coulomb repulsion by the remaining protons.
Exam Note: Mention Coulomb repulsion as the reason.
Question 258. Find the energy required for separation of a Ne20 nucleus into two alpha-particles and a C12 nucleus if it is known that the binding energies per one nucleon in Ne20, He4 and C12 nuclei are equal to 8.03, 7.07 and 7.68 MeV respectively.
Solution. The required energy is simply the difference in total binding energies = B.E. of Ne20 − 2(B.E. of He4) − B.E. of C12 = 20εNe − 8εα − 12εC (ε is the binding energy per nucleon). Substitution gives 20 × 8.03 − 8 × 7.07 − 12 × 7.68 = 11.88 MeV.
Teacher's Note: Total binding energy = A × (binding energy per nucleon); subtract fragments from parent.
Exam Note: Multiply per-nucleon values by A first.
Question 259. Calculate in atomic mass units the mass of (a) a Li8 atom whose nucleus has the binding energy 41.3 MeV; (b) a C10 nucleus whose binding energy per nucleon is equal to 6.04 MeV.
Solution. (a) For Li8: 41.3 MeV = 0.04436 amu = 3ΔH + 5Δn − Δ. Hence Δ = 3 × 0.00783 + 5 × 0.00867 − 0.04436 = 0.02248 amu, so the mass of the Li8 atom is 8.02248 amu.
(b) For C10: 10 × 6.04 = 60.4 MeV = 0.06488 amu = 6ΔH + 4Δn − Δ. Hence Δ = 6 × 0.00783 + 4 × 0.00867 − 0.06488 = 0.01678 amu. Hence the mass of C10 is 10.01678 amu.
Teacher's Note: Convert MeV to amu using 931 MeV per amu, then use Eb = ZΔH + (A−Z)Δn − Δ.
Exam Note: Add the mass number to Δ for the final mass.
Question 260. The nuclei involved in the nuclear reaction A1 + A2 → A3 + A4 have the binding energies E1, E2, E3 and E4. Find the energy of this reaction.
Solution. Suppose M1, M2, M3, M4 are the rest masses of the nuclei A1, A2, A3 and A4 participating in the reaction A1 + A2 → A3 + A4 + Q. Here Q is the energy released. Then by conservation of energy Q = c2(M1 + M2 − M3 − M4).
Now M1c2 = c2(Z1mH + (A1 − Z1)mn) − E1, etc., and Z1 + Z2 = Z3 + Z4 (conservation of charge), A1 + A2 = A3 + A4 (conservation of heavy particles). Hence the proton and neutron mass terms cancel and Q = (E3 + E4) − (E1 + E2).
Teacher's Note: Q = binding energy of products minus binding energy of reactants; nucleon masses cancel.
Exam Note: Derive using Z and A conservation.
Question 261. Assuming that the splitting of a U235 nucleus liberates the energy of 200 MeV, find: (a) the energy liberated in the fission of one kilogram of U235 isotope, and the mass of coal with calorific value of 30 kJ/g which is equivalent to that for one kg of U235; (b) the mass of U235 isotope split during the explosion of the atomic bomb with 30 kt trotyl equivalent if the calorific value of trotyl is 4.1 kJ/g.
Solution. (a) The energy liberated in the fission of 1 kg of U235 is (1000/235) × 6.023 × 1023 × 200 MeV = 8.21 × 1010 kJ.
The mass of coal with equivalent calorific value is (8.21 × 1010/30000) kg = 2.74 × 106 kg.
(b) The required mass is [30 × 109 × 4.1 × 103 / (200 × 1.602 × 10-13 × 6.023 × 1023)] × (235/1000) kg = 1.49 kg (about 1.5 kg).
Teacher's Note: Energy per kg = number of nuclei × 200 MeV; convert MeV to J with 1.602×10⁻¹³.
Exam Note: Convert kt to grams and kJ to J carefully.
Question 262. What amount of heat is liberated during the formation of one gram of He4 from deuterium H2? What mass of coal with calorific value of 30 kJ/g is thermally equivalent to the magnitude obtained?
Solution. The reaction is (in effect) H2 + H2 → He4 + Q. Then Q = 2ΔH2 − ΔHe4 = 0.02820 − 0.00260 = 0.02560 amu = 23.8 MeV.
Hence the energy released in 1 g of He4 is (6.023 × 1023/4) × 23.8 MeV = (6.023 × 1023/4) × 23.8 × 1.602 × 10-13 J = 5.75 × 108 kJ.
This energy can be derived from (5.75 × 108/30000) kg = 1.9 × 104 kg of coal.
Teacher's Note: Fusion of two deuterons into one He-4 releases 23.8 MeV; scale by atoms per gram.
Exam Note: Atoms per gram of He-4 = NA/4.
Question 263. Taking the values of atomic masses from the tables, calculate the energy per nucleon which is liberated in the nuclear reaction Li6 + H2 → 2He4. Compare the obtained magnitude with the energy per nucleon liberated in the fission of U235 nucleus.
Solution. The energy released in the reaction Li6 + H2 → 2He4 is ΔLi6 + ΔH2 − 2ΔHe4 = 0.01513 + 0.01410 − 2 × 0.00260 amu = 0.02403 amu = 22.37 MeV.
Energy per nucleon = 22.37/8 = 2.796 MeV/nucleon. This should be compared with the value 200/235 = 0.85 MeV/nucleon for fission of U235, so fusion here gives about 3.3 times more energy per nucleon.
Teacher's Note: Divide the reaction energy by the 8 nucleons taking part; compare with 200/235 for fission.
Exam Note: Quote both per-nucleon values and the ratio.
Question 264. Find the energy of the reaction Li7 + p → 2He4 if the binding energies per nucleon in Li7 and He4 nuclei are known to be equal to 5.60 and 7.06 MeV respectively.
Solution. The energy of the reaction Li7 + p → 2He4 is 2 × B.E. of He4 − B.E. of Li7 = 8εα − 7εLi = 8 × 7.06 − 7 × 5.60 = 17.3 MeV.
Teacher's Note: Proton has no binding energy; use Q = ΣEb(products) − ΣEb(reactants).
Exam Note: Use total (not per-nucleon) binding energies.
Question 265. Find the energy of the reaction N14(α, p)O17 if the kinetic energy of the incoming alpha-particle is Tα = 4.0 MeV and the proton outgoing at an angle θ = 60° to the motion direction of the alpha-particle has a kinetic energy Tp = 2.09 MeV.
Solution. The reaction is N14(α, p)O17. In the lab frame (N14 at rest), Tα = 4.0 MeV. Let m0 be the mass of O17, ηp = mp/m0, ηα = mα/m0.
The momentum of the incident α-particle is √(2mαTα) i = √(2ηαm0Tα) i. The momentum of the outgoing proton is √(2mpTp)(cos θ i + sin θ j) = √(2ηpm0Tp)(cos θ i + sin θ j).
The momentum of O17 is therefore (√(2ηαm0Tα) − √(2ηpm0Tp) cos θ) i − √(2m0ηpTp) sin θ j.
By energy conservation (including rest-mass energy and kinetic energy), M14c2 + Mαc2 + Tα = Mpc2 + Tp + M17c2 + [(√(ηαTα) − √(ηpTp) cos θ)2 + ηpTp sin2θ].
Hence by the definition of the Q of the reaction,
Q = (M14 + Mα − Mp − M17)c2 = Tp + ηαTα + ηpTp − 2√(ηpηαTαTp) cos θ − Tα = (1 + ηp)Tp − (1 − ηα)Tα − 2√(ηpηαTαTp) cos θ = −1.19 MeV.
Teacher's Note: Q is the change in rest-mass energy; get O-17 recoil energy from momentum conservation.
Exam Note: Negative Q: endothermic reaction; show recoil term.
Question 266. Making use of the tables of atomic masses, determine the energies of the following reactions: (a) Li7(p, n)Be7; (b) Be9(n, γ)Be10; (c) Li7(α, n)B10; (d) O16(d, α)N14.
Solution. (a) For Li7(p, n)Be7: Q = (MLi7 + Mp − MBe7 − Mn)c2 = (ΔLi7 − ΔBe7 + ΔH − Δn)c2 = (0.01601 + 0.00783 − 0.01693 − 0.00867) amu × c2 = −1.64 MeV.
(b) For Be9(n, γ)Be10 (mass of γ taken zero): Q = (MBe9 + Mn − MBe10)c2 = (ΔBe9 + Δn − ΔBe10)c2 = (0.01219 + 0.00867 − 0.01354) amu × c2 = 6.81 MeV.
(c) For Li7(α, n)B10: Q = (ΔLi7 + Δα − Δn − ΔB10)c2 = (0.01601 + 0.00260 − 0.00867 − 0.01294) amu × c2 = −2.79 MeV.
(d) For O16(d, α)N14: Q = (ΔO16 + Δd − Δα − ΔN14)c2 = (−0.00509 + 0.01410 − 0.00260 − 0.00307) amu × c2 = 3.11 MeV.
Teacher's Note: Q = mass-excess sum of reactants minus products, times 931 MeV/amu.
Exam Note: Sign of Q: positive exothermic, negative endothermic.
Question 267. Making use of the tables of atomic masses, find the velocity with which the products of the reaction B10(n, α)Li7 come apart; the reaction proceeds via interaction of very slow neutrons with stationary boron nuclei.
Solution. The reaction is B10(n, α)Li7. The energy of the reaction is Q = (ΔB10 + Δn − Δα − ΔLi7)c2 = (0.01294 + 0.00867 − 0.00260 − 0.01601) amu × c2 = 2.79 MeV.
Since the incident neutron is very slow and B10 is stationary, the final total momentum must also be zero. So the reaction products must emerge in opposite directions. If their speeds are vα and vLi, then 4vα = 7vLi and ½(4vα2 + 7vLi2) × 1.66 × 10-27 kg = 2.79 × 1.602 × 10-13 J.
So ½ × 4vα2(1 + 4/7) × 1.66 × 10-27 = 4.47 × 10-13, giving vα ≈ 9.3 × 106 m/s (book: 9.27 × 106 m/s). Then vLi = (4/7)vα ≈ 5.3 × 106 m/s.
Teacher's Note: Zero initial momentum means the products fly apart oppositely; share Q by momentum balance.
Exam Note: Use masses 4 u and 7 u; write both equations.
Question 268. Protons striking a stationary lithium target activate a reaction Li7(p, n)Be7. At what value of the proton’s kinetic energy can the resulting neutron be stationary?
Solution. The Q of this reaction (Li7(p, n)Be7) was calculated in problem 266(a): Q = −1.64 MeV. By conservation of momentum, pp = pBe (since the initial Li and the final neutron are both at rest). By energy conservation, Tp − 1.64 = pBe2/2mBe, i.e. pp2/2mp = pp2/2mBe + 1.64.
Then (pp2/2mp)(1 − mp/mBe) = 1.64. Hence Tp = pp2/2mp = (7/6) × 1.64 MeV = 1.91 MeV.
Teacher's Note: Neutron at rest means pp = pBe; then energy balance gives T = (7/6)|Q|.
Exam Note: Use mBe/mp = 7.
Question 269. An alpha particle with kinetic energy T = 5.3 MeV initiates a nuclear reaction Be9(α, n)C12 with energy yield Q = +5.7 MeV. Find the kinetic energy of the neutron outgoing at right angles to the motion direction of the alpha-particle.
Solution. It is understood that Be9 is initially at rest. The momentum of the outgoing neutron is √(2mnTn) j. The momentum of C12 is √(2mαT) i − √(2mnTn) j.
Then by energy conservation T + Q = Tn + (2mαT + 2mnTn)/(2mC) (mC is the mass of C12). Thus
Tn = [mC(T + Q) − mαT]/(mC + mn) = [Q + (1 − mα/mC)T]/(1 + mn/mC) = 8.52 MeV.
Teacher's Note: Right-angle emission lets the C-12 momentum be written by components; then use energy balance.
Exam Note: Use mass ratios 4:12:1; state Tn = 8.52 MeV.
Question 270. Protons with kinetic energy T = 1.0 MeV striking a lithium target induce a nuclear reaction p + Li7 → 2He4. Find the kinetic energy of each alpha-particle and the angle of their divergence provided their motion directions are symmetrical with respect to that of incoming protons.
Solution. The Q value of the reaction Li7(p, α)He4 is Q = (ΔLi7 + ΔH − 2ΔHe4)c2 = (0.01601 + 0.00783 − 0.00520) amu × c2 = 0.01864 amu × c2 = 17.35 MeV.
Since the directions of the two He4 nuclei are symmetrical, their momenta (and hence kinetic energies) must be equal. Let T′ be the kinetic energy of each He4 and θ the angle of divergence. Then pp = 2√(2mHeT′) cos(θ/2), where pp is the momentum of the proton. Also Tp + Q = 2T′.
Hence Tp + Q = 2 pp2 sec2(θ/2)/(8mHe) = Tp (mp/2mHe) sec2(θ/2). Hence cos(θ/2) = √[(mp/2mHe) · Tp/(Tp + Q)].
Substitution gives θ = 170.5° (170.53°). Also T′ = ½(Tp + Q) = 9.18 MeV.
Teacher's Note: Symmetric emission gives equal α energies; resolve momentum along the beam to find the angle.
Exam Note: Compute Q first; angle near 170°, each α 9.18 MeV.
Nuclear Reactions (Part - 2)
Question 271. A particle of mass m strikes a stationary nucleus of mass M and activates an endoergic reaction. Demonstrate that the threshold (minimal) kinetic energy required to initiate this reaction is defined by Eq. (6.6d).
Solution. The energy required is a minimum when the reaction products all move in the direction of the incident particle with the same velocity (so that the combination is at rest in the centre-of-mass frame). We then have √(2mTth) = (m + M)v (the total mass is constant in the nonrelativistic limit).
Energy conservation gives Tth − |Q| = ½(m + M)v2 = mTth/(m + M), or Tth · M/(m + M) = |Q|. Hence Tth = (1 + m/M)|Q|.
Teacher's Note: At threshold the products move together, so only centre-of-mass kinetic energy is unavailable.
Exam Note: Show momentum then energy equations; result (1 + m/M)|Q|.
Question 272. What kinetic energy must a proton possess to split a deuteron H2 whose binding energy is Eb = 2.2 MeV?
Solution. The result of the previous problem applies and we find that the energy required to split a deuteron is T ≥ (1 + Mp/Md)Eb = 3.3 MeV.
Teacher's Note: Splitting a deuteron is an endoergic reaction with |Q| equal to its binding energy.
Exam Note: Use Mp/Md = 1/2 in the threshold formula.
Question 273. The irradiation of lithium and beryllium targets by a monoenergetic stream of protons reveals that the reaction Li7(p, n)Be7 (Q = −1.65 MeV) is initiated whereas the reaction Be9(p, n)B9 (Q = −1.85 MeV) does not take place. Find the possible values of kinetic energy of the protons.
Solution. Since the reaction Li7(p, n)Be7 (Q = −1.65 MeV) is initiated, the incident proton energy must be ≥ (1 + Mp/MLi) × 1.65 = 1.89 MeV.
Since the reaction Be9(p, n)B9 (Q = −1.85 MeV) is not initiated, T ≤ (1 + Mp/MBe) × 1.85 = 2.06 MeV. Thus 1.89 MeV ≤ Tp ≤ 2.06 MeV.
Teacher's Note: Proton energy must exceed the Li threshold but stay below the Be threshold.
Exam Note: Compute both thresholds; answer is a range.
Question 274. To activate the reaction (n, α) with stationary B11 nuclei, neutrons must have the threshold kinetic energy Tth = 4.0 MeV. Find the energy of this reaction.
Solution. We have Tth = (1 + mn/MB11)|Q|, or Q = −(11/12) × 4 MeV = −3.67 MeV.
Teacher's Note: Invert the threshold formula; Q is negative because the reaction is endoergic.
Exam Note: Do not forget the minus sign on Q.
Question 275. Calculate the threshold kinetic energies of protons required to activate the reactions (p, n) and (p, d) with Li7 nuclei.
Solution. The Q of the reaction Li7(p, n)Be7 was calculated in problem 266(a); it is −1.64 MeV. Hence the threshold kinetic energy of protons for initiating this reaction is Tth = (1 + mp/mLi)|Q| = (8/7) × 1.64 = 1.87 MeV.
For the reaction Li7(p, d)Li6 we find Q = (ΔLi7 + ΔH − Δd − ΔLi6)c2 = (0.01601 + 0.00783 − 0.01410 − 0.01513) amu × c2 = −5.02 MeV.
The threshold proton energy for initiating this reaction is Tth = (1 + mp/mLi7) × |Q| = (8/7) × 5.02 = 5.73 MeV (about 5.7 MeV).
Teacher's Note: Threshold = (1 + m/M)|Q|; find each Q from mass excesses.
Exam Note: Two Q values, two thresholds; state both.
Question 276. Using the tabular values of atomic masses, find the threshold kinetic energy of an alpha particle required to activate the nuclear reaction Li7(α, n)B10. What is the velocity of the B10 nucleus in this case?
Solution. The Q of Li7(α, n)B10 was calculated in problem 266(c): |Q| = 2.79 MeV (Q = −2.79 MeV). Then the threshold energy of the α-particle is Tth = (1 + mα/mLi)|Q| = (1 + 4/7) × 2.79 = 4.38 MeV.
The velocity of B10 in this case is simply the velocity of the centre of mass: v = √(2mαTth)/(mα + mLi) = [1/(1 + mLi/mα)] √(2Tth/mα). This is because both B10 and n are at rest in the CM frame at threshold. Substituting the values of the various quantities we get v = 5.27 × 106 m/s.
Teacher's Note: At threshold the products move with the centre-of-mass velocity, equal to total momentum over total mass.
Exam Note: Give threshold energy and CM velocity separately.
Question 277. A neutron with kinetic energy T = 10 MeV activates a nuclear reaction C12(n, α)Be9 whose threshold is Tth = 6.17 MeV. Find the kinetic energy of the alpha-particles outgoing at right angles to the incoming neutrons’ direction.
Solution. The momentum of the incident neutron is √(2mnT) i, that of the α-particle is √(2mαTα) j, and that of Be9 is −√(2mαTα) j + √(2mnT) i.
By conservation of energy, T = Tα + (mαTα + mnT)/M + |Q| (M is the mass of Be9). Thus Tα = [T(1 − mn/M) − |Q|] · M/(M + mα).
Using Tth = (1 + mn/M′)|Q| (M′ is the mass of the C12 nucleus), we get Tα = [M/(M + mα)] [(1 − mn/M)T − Tth/(1 + mn/M′)], or Tα = (1/(M + mα)) [(M − mn)T − (MM′/(M′ + mn))Tth] = 2.21 MeV.
Teacher's Note: Right-angle emission fixes the Be-9 momentum components; |Q| comes from the threshold energy.
Exam Note: First get |Q| from Tth; result 2.21 MeV.
Question 278. How much, in per cent, does the threshold energy of gamma quantum exceed the binding energy of a deuteron (Eb = 2.2 MeV) in the reaction γ + H2 → n + p?
Solution. The formula of problem 271 does not apply here because the photon is always relativistic. At threshold, the energy Eγ of the photon implies a momentum Eγ/c. The velocity of the centre of mass with respect to the rest frame of the initial H2 is Eγ/[(mn + mp)c].
Since both n and p are at rest in the CM frame at threshold, we write by conservation of energy Eγ = Eγ2/[2(mn + mp)c2] + Eb. Since the first term is a small correction, we have Eγ ≈ Eb + Eb2/[2(mn + mp)c2].
Thus δE/Eb = Eb/[2(mn + mp)c2] = 2.2/(2 × 2 × 938) = 5.9 × 10-4, or nearly 0.06%.
Teacher's Note: A photon is relativistic, so the deuteron recoil kinetic energy adds a small excess over Eb.
Exam Note: Do not use (1 + m/M)|Q| for photons; answer 0.06%.
Question 279. A proton with kinetic energy T = 1.5 MeV is captured by a deuteron H2. Find the excitation energy of the formed nucleus.
Solution. The reaction is p + d → He3. The excitation energy of He3 is just the energy available in the centre of mass. The velocity of the centre of mass is √(2mpTp)/(mp + md) = (1/3)√(2Tp/mp).
In the CM frame, the kinetic energy available is (taking md ≈ 2mp) ½mp[(2/3)√(2T/mp)]2 + ½(2mp)[(1/3)√(2T/mp)]2 = 2T/3.
The total energy available is then Q + 2T/3, where Q = c2(ΔH + Δd − ΔHe3) = c2 × (0.00783 + 0.01410 − 0.01603) amu = 5.49 MeV. Finally E = 5.49 + 1.0 = 6.49 MeV.
Teacher's Note: Excitation energy = Q plus the share of kinetic energy available in the CM frame (2T/3).
Exam Note: Add Q (5.49 MeV) and 2T/3 (1.0 MeV).
Question 280. The yield of the nuclear reaction C13(d, n)N14 has maximum magnitudes at the following values of kinetic energy Ti of bombarding deuterons: 0.60, 0.90, 1.55, and 1.80 MeV. Making use of the table of atomic masses, find the corresponding energy levels of the transitional nucleus through which this reaction proceeds.
Solution. The reaction is d + C13 → N15* → n + N14. The maxima of yield determine the energy levels of N15*. As in the previous problem, the excitation energy is Eexc = Q + EK, where EK is the available kinetic energy. The velocity of the centre of mass is √(2mdTi)/(md + mc) = [md/(md + mc)]√(2Ti/md).
So EK = ½md[1 − md/(md + mc)]2(2Ti/md) + ½mc[md/(md + mc)]2(2Ti/md) = [mc/(md + mc)] Ti.
Here Q is the value for the formation of N15 in the ground state: Q = c2(Δd + ΔC13 − ΔN15) = c2 × (0.01410 + 0.00335 − 0.00011) amu = 16.14 MeV. The excitation energies are then 16.66 MeV, 16.92 MeV, 17.49 MeV and 17.70 MeV.
Teacher's Note: Each yield peak is a resonance: level energy = Q (ground-state capture) + CM kinetic energy.
Exam Note: Use EK = (13/15)Ti; list four levels.
Question 281. A narrow beam of thermal neutrons is attenuated η = 360 times after passing through a cadmium plate of thickness d = 0.50 mm. Determine the effective cross-section of interaction of these neutrons with cadmium nuclei.
Solution. We have the relation 1/η = e−nσd. Here 1/η is the attenuation factor, n = number of Cd nuclei per unit volume, σ = effective cross-section, d = thickness of the plate. Now n = ρNA/M (ρ = density, M = molar weight of Cd, NA = Avogadro number). Thus σ = [M/(ρNAd)] ln η = 2.53 kb.
Teacher's Note: Exponential attenuation: take ln η, then divide by nd.
Exam Note: Convert 0.50 mm to cm before computing; answer in kilobarns.
Question 282. Determine how many times the intensity of a narrow beam of thermal neutrons will decrease after passing through the heavy water layer of thickness d = 5.0 cm. The effective cross-sections of interaction of deuterium and oxygen nuclei with thermal neutrons are equal to σ1 = 7.0 b and σ2 = 4.2 b respectively.
Solution. Here 1/η = e−(nDσD + nOσO)d, where D refers to deuterium (σD = 7.0 b) and O to oxygen nuclei (σO = 4.2 b). Using nD = 2n and nO = n = concentration of O nuclei in heavy water, we get 1/η = e−(2σD + σO)nd.
Now using the data for heavy water: n = 1.1 × 6.023 × 1023/20 = 3.313 × 1022 per cm3. Thus, substituting the values, η = 20.4 = I0/I.
Teacher's Note: D2O has two D nuclei per O nucleus; add the macroscopic cross-sections.
Exam Note: Use nD = 2nO; answer about 20 times.
Question 283. A narrow beam of thermal neutrons passes through a plate of iron whose absorption and scattering effective cross-sections are equal to σa = 2.5 b and σs = 11 b respectively. Find the fraction of neutrons quitting the beam due to scattering if the thickness of the plate is d = 0.50 cm.
Solution. In traversing a distance d the fraction which is either scattered or absorbed is clearly 1 − e−n(σs + σa)d, by the usual definition of the attenuation factor. Of this, the fraction scattered is (by definition of scattering and absorption cross-section) w = {1 − e−n(σs + σa)d} σs/(σs + σa).
In iron n = ρNA/M = 8.39 × 1022 per cm3. Substitution gives w = 0.352.
Teacher's Note: Total removal fraction splits between scattering and absorption in the ratio of cross-sections.
Exam Note: Multiply the removed fraction by σs/(σs+σa).
Question 284. The yield of a nuclear reaction producing radionuclides may be described in two ways: either by the ratio w of the number of nuclear reactions to the number of bombarding particles, or by the quantity k, the ratio of the activity of the formed radionuclide to the number of bombarding particles. Find: (a) the half-life of the formed radionuclide, assuming w and k to be known; (b) the yield w of the reaction Li7(p, n)Be7 if after irradiation of a lithium target by a beam of protons (over t = 2.0 hours and with beam current I = 10 μA) the activity of Be7 became equal to A = 1.35 × 108 dis/s and its half-life to T = 53 days.
Solution. (a) Assuming, of course, that each reaction produces a radionuclide of the same type, the decay constant λ of the radionuclide is k/w. Hence T = ln 2/λ = (w/k) ln 2.
(b) The number of bombarding particles is It/e (e = charge on proton). Then the number of Be7 produced is (It/e)w. If λ = ln 2/T is the decay constant of Be7, then the activity is A = (It/e) · w · ln 2/T. Hence w = eAT/(It ln 2) = 1.98 × 10-3.
Teacher's Note: Activity = λ × number of nuclei formed, so k/w gives λ.
Exam Note: Convert T to seconds and t to seconds before substituting.
Question 285. Thermal neutrons fall normally on the surface of a thin gold foil consisting of stable Au197 nuclide. The neutron flux density is J = 1.0 × 1010 part./(s·cm2). The mass of the foil is m = 10 mg. The neutron capture produces beta-active Au198 nuclei with half-life T = 2.7 days. The effective capture cross-section is σ = 98 b. Find: (a) the irradiation time after which the number of Au197 nuclei decreases by η = 1.0%; (b) the maximum number of Au198 nuclei that can be formed during protracted irradiation.
Solution. (a) Suppose N0 is the number of Au197 nuclei in the foil. Then the number of Au197 nuclei transformed in time t is N0Jσt. For this to equal ηN0, we must have t = η/(Jσ) = 323 years.
(b) The rate of formation of Au198 nuclei is N0Jσ per second and the rate of decay is λn, where n is the number of Au198 at any instant. Thus dn/dt = N0Jσ − λn.
The maximum number of Au198 is clearly nmax = N0Jσ/λ = N0JσT/ln 2, because if n is smaller, dn/dt > 0 and n increases further, and if n is larger, dn/dt < 0 and n will decrease. (Actually nmax is approached steadily as t → ∞.) Substitution, using N0 = 3.057 × 1019, gives nmax = 1.01 × 1013.
Teacher's Note: Maximum activation occurs when production Jσ N0 equals decay λn.
Exam Note: Set dn/dt = 0 for nmax; 323 years for 1% burn-up.
Question 286. A thin foil of certain stable isotope is irradiated by thermal neutrons falling normally on its surface. Due to the capture of neutrons a radionuclide with decay constant λ appears. Find the law describing accumulation of that radionuclide N(t) per unit area of the foil’s surface. The neutron flux density is J, the number of nuclei per unit area of the foil’s surface is n, and the effective cross-section of formation of active nuclei is σ.
Solution. The rate of formation of the radionuclide is nJσ per unit area per second. The rate of decay is λN. Thus dN/dt = nJσ − λN per unit area per second.
Then (dN/dt + λN)eλt = nJσeλt, or d(Neλt)/dt = nJσeλt. Hence Neλt = const + (nJσ/λ)eλt. The number of radionuclides at t = 0 when the process starts is zero, so the constant = −nJσ/λ. Then N = (nJσ/λ)(1 − e−λt).
Teacher's Note: Production minus decay gives a linear ODE with a saturating exponential solution.
Exam Note: Use N(0) = 0 to fix the constant.
Question 287. A gold foil of mass m = 0.20 g was irradiated during t = 6.0 hours by a thermal neutron flux falling normally on its surface. Following τ = 12 hours after the completion of irradiation the activity of the foil became equal to A = 1.9 × 107 dis/s. Find the neutron flux density if the effective cross-section of formation of a radioactive nucleus is σ = 96 b, and the half-life is equal to T = 2.7 days.
Solution. We apply the formula of the previous problem, except that N is now the number of radionuclides and n is the number of host nuclei originally. Here n = (0.2/197) × 6.023 × 1023 = 6.115 × 1020.
Then after time t, N = (nJσT/ln 2)(1 − e−t ln 2/T), where T is the half-life of the radionuclide. After the neutron source is cut off, the activity after time τ will be A = (nJσT/ln 2)(1 − e−t ln 2/T) e−τ ln 2/T (ln 2/T) = nJσ(1 − e−t ln 2/T) e−τ ln 2/T.
Thus J = A eτ ln 2/T/[nσ(1 − e−t ln 2/T)] = 5.92 × 109 particles/(cm2·s).
Teacher's Note: Activity after irradiation: build-up factor (1 − e−λt) times decay factor e−λτ.
Exam Note: Use λ = ln2/T; keep time units consistent.
Question 288. How many neutrons are there in the hundredth generation if the fission process starts with N0 = 1000 neutrons and takes place in a medium with multiplication constant k = 1.05?
Solution. The number of neutrons in the first generation = number initially = N0. In the second generation = N0 × multiplication factor = N0k. In the third generation = N0 · k · k = N0k2. In the n-th generation = N0kn−1. Substitution gives 1000 × (1.05)99 = 1.25 × 105 neutrons.
Teacher's Note: Geometric progression: the n-th generation has N0kn−1 neutrons.
Exam Note: Exponent is n − 1 = 99, not 100.
Question 289. Find the number of neutrons generated per unit time in a uranium reactor whose thermal power is P = 100 MW if the average number of neutrons liberated in each nuclear splitting is ν = 2.5. Each splitting is assumed to release an energy E = 200 MeV.
Solution. The number of fissions per unit time is clearly P/E. Hence the number of neutrons produced per unit time is νP/E. Substitution gives 2.5 × 100 × 106/(200 × 1.602 × 10-13) = 7.80 × 1018 neutrons/s.
Teacher's Note: Fission rate = power divided by energy per fission; multiply by ν.
Exam Note: Convert MeV to joules before dividing.
Question 290. In a thermal reactor the mean lifetime of one generation of thermal neutrons is τ = 0.10 s. Assuming the multiplication constant to be equal to k = 1.010, find: (a) how many times the number of neutrons in the reactor, and consequently its power, will increase over t = 1.0 min; (b) the period T of the reactor, i.e. the time period over which its power increases e-fold.
Solution. (a) This number is kn−1, where n = number of generations in time t = t/τ = 600. Substitution gives 388.
(b) We write kn−1 = e((T/τ − 1) ln k) = e, or T/τ − 1 = 1/ln k, and T = τ(1 + 1/ln k) = 10.15 s.
Teacher's Note: Generations in time t are t/τ; growth per generation is k, so e-fold needs ln k.
Exam Note: Use n − 1 = 599; period about 10.15 s.
Step-by-Step IE Irodov Solutions for JEE Math
Chapter-wise IE Irodov Solutions: IE Irodov Solutions Chapter 39 Nuclear Reactions
Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 39 Nuclear Reactions PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Concept-Driven Math Answers
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Complete Your JEE Exam Preparation
In addition to these IE Irodov Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.