Official IE Irodov Textbook Solutions: JEE Physics Chapter 31 Dispersion And Absorption Of Light
Explore reliable textbook solutions for Chapter 31 Dispersion And Absorption Of Light tailored for JEE learners using IE Irodov methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Chapter-wise Solutions for Physics: Chapter 31 Dispersion And Absorption Of Light
View or download the dedicated Chapter 31 Dispersion And Absorption Of Light solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Dispersion and Absorption of Light - Questions 200 to 223
Dispersion and Absorption of Light
Question 200. A free electron is located in the field of a monochromatic light wave. The intensity of light is I = 150 W/m2, its frequency is ω = 3.4·1015 s-1. Find: (a) the electron's oscillation amplitude and its velocity amplitude; (b) the ratio Fm/Fe, where Fm and Fe are the amplitudes of forces with which the magnetic and electric components of the light wave field act on the electron; demonstrate that this ratio is equal to ½ v/c, where v is the electron's velocity amplitude and c is the velocity of light. Instruction. The action of the magnetic field component can be disregarded in the equation of motion of the electron since the calculations show it to be negligible.
Solution.
In a travelling plane electromagnetic wave the intensity is the time-averaged magnitude of the Poynting vector:
I = ⟨|E × H|⟩ = ⟨√(ε0/μ0) E2⟩ = ⟨c ε0 E2⟩,
using c = 1/√(ε0μ0) and E√ε0 = H√μ0. The time average of E2 is E02/2, so
I = ½ c ε0 E02, E0 = √(2I/(c ε0)).
(a) Take the electric field at the electron as E = E0 sin ωt. The equation of motion is m ẍ = e E0 sin ωt, so x = −(e E0/(m ω2)) sin ωt.
The amplitude of the forced oscillation is
e E0/(m ω2) = (e/(m ω2)) √(2I/(c ε0)) = 5.1 × 10-16 cm.
The velocity amplitude is
e E0/(m ω) = 5.1 × 10-16 × 3.4 × 1015 = 1.73 cm/s.
(b) The amplitude of the electric force is Fe = e E0. The magnetic force (neglected above) is e v B = e v μ0 H = e v E √(ε0μ0) = e v E/c.
Writing v = −v0 cos ωt, where v0 = e E0/(m ω), the magnetic force is, apart from a sign, (e v0 E0/(2c)) sin 2ωt.
Hence the ratio of the amplitudes of the two forces is
Fm/Fe = v0/(2c) = 2.9 × 10-11.
This is negligible and justifies neglecting the magnetic field of the electromagnetic wave in calculating v0.
Teacher's Note: Find E0 from I = ½cε0E0², then x0 = eE0/(mω²). Magnetic force is smaller by v0/2c, about 10⁻¹¹.
Exam Note: Show E0 from I; state F_m/F_e = v/2c.
Question 201. An electromagnetic wave of frequency ω propagates in dilute plasma. The free electron concentration in plasma is equal to n0. Neglecting the interaction of the wave and plasma ions, find: (a) the frequency dependence of plasma permittivity; (b) how the phase velocity of the electromagnetic wave depends on its wavelength λ in plasma.
Solution.
(a) One can neglect the spatial dependence of the electric field as well as the magnetic field. Thus for a typical electron m r̈ = eE0 sin ωt, so r = −(eE0/(m ω2)) sin ωt (neglecting any non-sinusoidal part).
The ions will be practically unaffected. Then the polarisation is
P = n0 e r = −(n0e2/(m ω2)) E,
and D = ε0E + P = ε0(1 − n0e2/(ε0 m ω2)) E.
Hence the permittivity is
ε = 1 − n0e2/(ε0 m ω2).
(b) The phase velocity is v = ω/k = c/√ε. So c k = ω √(1 − ωP2/ω2), where ωP2 = n0e2/(ε0 m), i.e. ω2 = c2k2 + ωP2.
Thus, with k = 2π/λ,
v = c √(1 + ωP2/(c2k2)) = c √(1 + (n0e2/(4π2 m c2 ε0)) λ2).
Teacher's Note: Electron driven by wave gives polarisation P = n0·e·r; ε = 1 − ωp²/ω². Phase velocity then exceeds c.
Exam Note: Quote ε(ω) and v(λ); state ωp² = n0e²/ε0m.
Question 202. Find the free electron concentration in ionosphere if its refractive index is equal to n = 0.90 for radio waves of frequency ν = 100 MHz.
Solution.
From the previous problem
n2 = 1 − n0e2/(ε0 m ω2) = 1 − n0e2/(4π2 ε0 m ν2).
Thus n0 = (4π2ν2 m ε0/e2)(1 − n2) = 2.36 × 107 cm-3.
Teacher's Note: Use n² = 1 − n0e²/(4π²ε0mν²) with ν in Hz and 1 − n² = 0.19.
Exam Note: Convert 100 MHz to Hz; answer in cm⁻³.
Question 203. Assuming electrons of substance to be free when subjected to hard X-rays, determine by what magnitude the refractive index of graphite differs from unity in the case of X-rays whose wavelength in vacuum is equal to λ = 50 pm.
Solution.
For hard X-rays the electrons in graphite behave as if nearly free, and the formula of the previous problem can be applied. Thus
n2 = 1 − n0e2/(ε0 m ω2), and n = 1 − n0e2/(2ε0 m ω2)
on taking the square root and neglecting higher-order terms. So
n − 1 = −n0e2/(2ε0 m ω2) = −n0e2λ2/(8π2 ε0 m c2).
We calculate n0 as follows: there are 6 × 6.023 × 1023 electrons in 12 g of graphite of density 1.6 g/cm3. Thus
n0 = 6 × 6.023 × 1023/(12/1.6) per cm3.
Using the values of the other constants and λ = 50 × 10-12 m we get
n − 1 = −5.4 × 10-7.
Teacher's Note: Count 6 electrons per carbon atom for n0, then use n−1 = −n0e²λ²/(8π²ε0mc²). X-ray index is below 1.
Exam Note: Give n−1 = −5.4×10⁻⁷ with n0 shown.
Question 204. An electron experiences a quasi-elastic force kx and a "friction force" γẋ in the field of electromagnetic radiation. The E-component of the field varies as E = E0 cos ωt. Neglecting the action of the magnetic component of the field, find: (a) the motion equation of the electron; (b) the mean power absorbed by the electron; the frequency at which that power is maximum and the expression for the maximum mean power.
Solution.
(a) The equation of the electron can (under the stated conditions) be written as
m ẍ + γ ẋ + k x = e E0 cos ωt.
To solve it, use complex displacements. Consider m z̈ + γ ż + k z = e E0 e−iωt. Its solution (ignoring transients) is
z = e E0 e−iωt/(−m ω2 − iγω + k).
Writing β = γ/(2m), ω02 = k/m, we find z = (e E0/m) e−iωt/(ω02 − ω2 − 2iβω).
Now x = real part of z = (e E0/m) cos(ωt + φ)/√((ω02 − ω2)2 + 4β2ω2) = a cos(ωt + φ), where tan φ = 2βω/(ω2 − ω02) (sin φ = −2βω/√((ω2 − ω02)2 + 4β2ω2)).
(b) The mean power absorbed is
P = ⟨F ẋ⟩ = ⟨e E0 cos ωt (−ω a sin(ωt + φ))⟩ = e E0 · (e E0/m) · ½ · 2βω/((ω02 − ω2)2 + 4β2ω2) · ω = (e E0/m)2 β m ω2/((ω02 − ω2)2 + 4β2ω2).
Dividing numerator and denominator by ω2:
P = (e E0/m)2 β m/((ω02/ω − ω)2 + 4β2).
This is maximum when ω = ω0, and
Pmax = (m/(4β)) (e E0/m)2 for ω = ω0.
Equivalently, P = ⟨γ ẋ · ẋ⟩ = γ ω2a2/2 = β m ω2(e E0/m)2/((ω02 − ω2)2 + 4β2ω2).
Teacher's Note: Solve driven damped oscillator with complex amplitude; power is absorbed only through friction, peaking at resonance ω = ω0.
Exam Note: Write equation, P(ω), and P_max at ω0.
Question 205. In some cases permittivity of substance turns out to be a complex or a negative quantity, and refractive index, respectively, a complex (n′ = n + iχ) or an imaginary (n′ = iχ) quantity. Write the equation of a plane wave for both of these cases and find out the physical meaning of such refractive indices.
Solution.
Write the solution of the wave equation in the form A = A0 exp(i(ωt − kx)), where k = 2π/λ and λ is the wavelength in the medium. If n′ = n + iχ, then k = (2π/λ0) n′ (λ0 is the wavelength in vacuum) and the equation becomes
A = A0 eχ′x exp(i(ωt − k′x)), where χ′ = 2πχ/λ0 and k′ = 2πn/λ0;
or, taking the real part, A = A0 eχ′x cos(ωt − k′x).
This represents a plane wave whose amplitude diminishes as it propagates to the right (provided χ′ < 0).
When n′ = iχ, then similarly (on putting n = 0 in the above equation) A = A0 eχ′x cos ωt.
This represents a standing wave whose amplitude diminishes as one goes to the right (if χ′ < 0). The wavelength of the wave is infinite (k′ = 0).
Waves of the former type are realised inside metals as well as inside dielectrics when there is total reflection (penetration of the wave).
Teacher's Note: Complex index gives a decaying travelling wave (absorption); purely imaginary index gives a non-propagating decaying disturbance, as in total reflection.
Exam Note: Real part of n′ sets propagation; imaginary part sets attenuation.
Question 206. A sounding of dilute plasma by radio waves of various frequencies reveals that radio waves with wavelengths exceeding λ0 = 0.75 m experience total internal reflection. Find the free electron concentration in that plasma.
Solution.
Total reflection sets in when the refractive index vanishes:
0 = 1 − n0e2/(ε0 m ω2) if ω = 2πc/λ0.
Hence n0e2λ02/(4π2 ε0 m c2) = 1, or
n0 = 4π2 ε0 m c2/(e2λ02) = 1.984 × 109 per cm3.
Teacher's Note: Cutoff occurs when ε = 0, i.e. ω = ωp; put ω = 2πc/λ0.
Exam Note: Set n = 0 at the critical wavelength.
Question 207. Using the definition of the group velocity u, derive Rayleigh's formula (5.5d). Demonstrate that in the vicinity of λ = λ′ the velocity u is equal to the segment v′ cut by the tangent of the curve v(λ) at the point λ′ (Fig. 5.36).
Solution.
By definition u = dω/dk = d(vk)/dk, as ω = vk, so u = v + k dv/dk.
Now k = 2π/λ, so dk = −(2π/λ2) dλ. Thus
u = v − λ dv/dλ (Rayleigh's formula).
Its interpretation: (dv/dλ) at λ = λ′ is the slope of the v–λ curve at λ = λ′. The tangent to the curve at λ′ meets the v-axis at
v′ = v(λ′) − λ′ (dv/dλ) at λ = λ′, which is exactly the group velocity u for λ = λ′ (the tangent rises by λ′(dv/dλ) over the distance λ′ from the axis).
Teacher's Note: Differentiate ω = vk with k = 2π/λ to get u = v − λ dv/dλ; tangent's intercept equals u.
Exam Note: Derive u = v − λ dv/dλ; state tangent intercept.
Question 208. Find the relation between the group velocity u and phase velocity v for the following dispersion laws: (a) v ∝ 1/√λ; (b) v ∝ k; (c) v ∝ 1/ω2. Here λ, k, and ω are the wavelength, wave number, and angular frequency.
Solution.
(a) v = a/√λ, a = constant. Then u = v − λ dv/dλ = a/√λ − λ(−½ a λ−3/2) = (3/2) a/√λ = (3/2) v.
(b) v = b k = ω/k, b = constant, so ω = b k2 and u = dω/dk = 2bk = 2v.
(c) v = c/ω2 = ω/k (c = constant), so ω3 = ck, or ω = c1/3k1/3. Thus u = dω/dk = c1/3 (1/3) k−2/3 = (1/3)(ω/k) = (1/3) v.
Teacher's Note: Use u = v − λ dv/dλ or u = dω/dk; results are 3v/2, 2v and v/3.
Exam Note: Write each ω(k), then u = dω/dk.
Question 209. In a certain medium the relationship between the group and phase velocities of an electromagnetic wave has the form uv = c2, where c is the velocity of light in vacuum. Find the dependence of permittivity of that medium on wave frequency, ε(ω).
Solution.
We have uv = (ω/k)(dω/dk) = c2. Integrating, we find ω2 = A + c2k2, where A is a constant. So k = √(ω2 − A)/c and
v = ω/k = c/√(1 − A/ω2).
Writing this as c/√ε(ω) we get
ε(ω) = 1 − A/ω2 (A can be positive or negative).
Teacher's Note: uv = ω·dω/(k·dk) = c² integrates to ω² = A + c²k²; then ε = (ck/ω)².
Exam Note: Integrate to ω² = A + c²k²; give ε(ω).
Question 210. The refractive index of carbon dioxide at the wavelengths 509, 534, and 589 nm is equal to 1.647, 1.640, and 1.630 respectively. Calculate the phase and group velocities of light in the vicinity of λ = 534 nm.
Solution.
The phase velocity of light in the vicinity of λ0 = 534 nm is
v(λ0) = c/n(λ0) = 3 × 108/1.640 = 1.829 × 108 m/s.
To get the group velocity we need dn/dλ at λ = λ0. We use linear interpolation in the two intervals. Thus
(dn/dλ) at 521.5 nm = −0.007/25 = −28 × 10-5 per nm,
(dn/dλ) at 561.5 nm = −0.01/55 = −18.2 × 10-5 per nm,
and interpolating to 534 nm: (dn/dλ) = [−28 + (9.8/40) × 12.5] × 10-5 per nm = −24.9 × 10-5 per nm.
u = c/n − λ d(c/n)/dλ = (c/n)[1 + (λ/n)(dn/dλ)].
At λ = 534 nm:
u = (3 × 108/1.640)[1 − (534/1.640) × 24.9 × 10-5] m/s.
Corrected: the bracket is 1 − 0.0811 = 0.919, so u = 1.68 × 108 m/s (the book printed 1.59 × 108 m/s, which does not follow from its own numbers). Since dn/dλ is only known approximately from the data, u ≈ 1.7 × 108 m/s.
Teacher's Note: Get dn/dλ from the data: u = (c/n)[1 + (λ/n) dn/dλ]; n falls with λ, so u < v.
Exam Note: Compute dn/dλ numerically; u is less than v.
Question 211. A train of plane light waves propagates in the medium where the phase velocity v is a linear function of wavelength: v = a + bλ, where a and b are some positive constants. Demonstrate that in such a medium the shape of an arbitrary train of light waves is restored after the time interval τ = 1/b.
Solution.
We write v = ω/k = a + bλ, so ω = k(a + bλ) = 2πb + ak (since k = 2π/λ).
Suppose a wave train at time t = 0 has the form F(x, 0) = ∫ f(k) eikx dk. Then at time t it will have the form
F(x, t) = ∫ f(k) eikx − iωt dk = ∫ f(k) eikx − i(2πb + ak)t dk = ∫ f(k) eik(x − at) e−i2πbt dk.
At t = 1/b = τ the factor e−i2πbτ = e−2πi = 1, so
F(x, τ) = F(x − aτ, 0),
i.e. the original shape is restored, shifted by aτ.
Teacher's Note: Write ω = 2πb + ak; the constant part gives phase e^(−2πibt), which equals 1 at t = 1/b.
Exam Note: Show phase factor equals 1 at t = 1/b.
Question 212. A beam of natural light of intensity I0 falls on a system of two crossed Nicol prisms between which a tube filled with certain solution is placed in a longitudinal magnetic field of strength H. The length of the tube is l, the coefficient of linear absorption of solution is χ, and the Verdet constant is V. Find the intensity of light transmitted through that system.
Solution.
On passing through the first (polarizer) Nicol the intensity of light becomes ½I0, because one of the components has been cut off. On passing through the solution the plane of polarization of the light beam rotates by φ = V l H and its intensity also decreases by a factor e−χl.
The plane of vibration of the light wave then makes an angle 90° − φ with the principal direction of the analyzer Nicol. Thus by Malus' law the intensity of light coming out of the second Nicol is
½ I0 e−χl cos2(90° − φ) = ½ I0 e−χl sin2φ, with φ = V l H.
Teacher's Note: Natural light halves at the polarizer; Faraday rotation φ = VlH; crossed analyzer gives sin²φ by Malus.
Exam Note: Combine ½, e^(−χl), and sin²(VlH).
Question 213. A plane monochromatic light wave of intensity I0 falls normally on a plane-parallel plate both of whose surfaces have a reflection coefficient ρ. Taking into account multiple reflections, find the intensity of the transmitted light if (a) the plate is perfectly transparent, i.e. the absorption is absent; (b) the coefficient of linear absorption is equal to χ, and the plate thickness is d.
Solution.
(a) Each transmission through a surface gives a factor (1 − ρ) and each internal reflection gives a factor ρ. (Figure in the book: the beam I0 splits into a reflected part ρI0 and a transmitted part (1 − ρ)I0 inside; at the second surface (1 − ρ)2I0 leaves, and ρ(1 − ρ)I0 is reflected back, and so on.) Thus the transmitted intensity, assuming incoherent light, is
(1 − ρ)2I0 + (1 − ρ)2ρ2I0 + (1 − ρ)2ρ4I0 + … = (1 − ρ)2I0(1 + ρ2 + ρ4 + …) = (1 − ρ)2I0/(1 − ρ2) = I0(1 − ρ)/(1 + ρ).
(b) When there is absorption, we pick up a factor σ = e−χd in each traversal of the plate. Thus we get
(1 − ρ)2σI0 + (1 − ρ)2σ3ρ2I0 + (1 − ρ)2σ5ρ4I0 + … = (1 − ρ)2σI0(1 + σ2ρ2 + σ4ρ4 + …) = I0 σ(1 − ρ)2/(1 − σ2ρ2), where σ = e−χd.
Teacher's Note: Sum the geometric series of beams that pass the plate after 0, 2, 4… internal reflections (ratio ρ²σ²).
Exam Note: Write geometric series and its sum.
Question 214. Two plates, one of thickness d1 = 3.8 mm and the other of thickness d2 = 9.0 mm, are manufactured from a certain substance. When placed alternately in the way of monochromatic light, the first transmits τ1 = 0.84 fraction of luminous flux and the second, τ2 = 0.70. Find the coefficient of linear absorption of that substance. Light falls at right angles to the plates. The secondary reflections are to be neglected.
Solution.
We have τ1 = e−χd1(1 − ρ)2 and τ2 = e−χd2(1 − ρ)2, where ρ is the reflectivity (multiple reflections are ignored). Thus τ1/τ2 = eχ(d2 − d1), or
χ = ln(τ1/τ2)/(d2 − d1) = ln(0.84/0.70)/(0.52 cm) = 0.35 cm-1.
Teacher's Note: Dividing the two transmissions cancels the unknown reflection factor (1−ρ)², leaving only absorption.
Exam Note: Take the ratio to eliminate ρ.
Question 215. A beam of monochromatic light passes through a pile of N = 5 identical plane-parallel glass plates each of thickness l = 0.50 cm. The coefficient of reflection at each surface of the plates is ρ = 0.050. The ratio of the intensity of light transmitted through the pile of plates to the intensity of incident light is τ = 0.55. Neglecting the secondary reflections of light, find the absorption coefficient of the given glass.
Solution.
On each surface we pick up a factor (1 − ρ) from reflection and a factor e−χl due to absorption in each plate. Thus
τ = (1 − ρ)2N e−χNl, so χ = (1/(Nl)) ln((1 − ρ)2N/τ) = 0.034 cm-1.
Teacher's Note: Five plates give ten surfaces: (1−ρ)^10, and total path Nl = 2.5 cm in glass.
Exam Note: Count 2N surfaces and N·l of glass.
Question 216. A beam of monochromatic light falls normally on the surface of a plane-parallel plate of thickness l. The absorption coefficient of the substance the plate is made of varies linearly along the normal to its surface from χ1 to χ2. The coefficient of reflection at each surface of the plate is equal to ρ. Neglecting the secondary reflections, find the transmission coefficient of such a plate.
Solution.
Apart from the factor (1 − ρ) on each end face of the plate, we shall get a factor due to absorption. This factor can be calculated by assuming the plate to consist of a large number of very thin slabs within each of which the absorption coefficient is constant. Thus we get a product like … e−χ(x)dx e−χ(x+dx)dx e−χ(x+2dx)dx …
This product is nothing but exp(−∫0l χ(x) dx). Now χ(0) = χ1, χ(l) = χ2 and the variation with x is linear, so χ(x) = χ1 + (x/l)(χ2 − χ1). Thus the factor becomes
exp(−∫0l [χ1 + (x/l)(χ2 − χ1)] dx) = e−½(χ1 + χ2)l.
Hence the transmission coefficient is τ = (1 − ρ)2 e−½(χ1 + χ2)l.
Teacher's Note: Absorption exponent is the integral of χ(x); a linear χ gives the mean value ½(χ1+χ2) times l.
Exam Note: Integrate χ(x) over thickness; add (1−ρ)².
Question 217. A beam of light of intensity I0 falls normally on a transparent plane-parallel plate of thickness l. The beam contains all the wavelengths in the interval from λ1 to λ2 of equal spectral intensity. Find the intensity of the transmitted beam if in this wavelength interval the absorption coefficient is a linear function of λ, with extreme values χ1 and χ2. The coefficient of reflection at each surface is equal to ρ. The secondary reflections are to be neglected.
Solution.
The spectral density of the incident beam (i.e. the intensity of the components whose wavelength lies in the interval λ to λ + dλ) is I0 dλ/(λ2 − λ1), λ1 ≤ λ ≤ λ2.
The absorption factor for this component is exp(−[χ1 + ((λ − λ1)/(λ2 − λ1))(χ2 − χ1)] l), and the transmission factor due to reflection at the surfaces is (1 − ρ)2. Thus the intensity of the transmitted beam is
(1 − ρ)2 (I0/(λ2 − λ1)) ∫λ1λ2 dλ exp(−l[χ1 + ((λ − λ1)/(λ2 − λ1))(χ2 − χ1)])
= (1 − ρ)2 (I0/(λ2 − λ1)) e−χ1l (1 − e−(χ2 − χ1)l)/((χ2 − χ1)l/(λ2 − λ1))
= (1 − ρ)2 I0 (e−χ1l − e−χ2l)/((χ2 − χ1) l).
Teacher's Note: Weight each wavelength by equal spectral intensity and integrate the exponential; change variable from λ to χ.
Exam Note: Integrate over λ; reflections give (1−ρ)².
Question 218. A light filter is a plate of thickness d whose absorption coefficient depends on wavelength λ as χ(λ) = α(1 − λ/λ0)2 cm-1, where α and λ0 are constants. Find the passband Δλ of this light filter, that is, the band at whose edges the attenuation of light is η times that at the wavelength λ0. The coefficient of reflection from the surfaces of the light filter is assumed to be the same at all wavelengths.
Solution.
At the wavelength λ0 the absorption coefficient vanishes and the loss in transmission is entirely due to reflection. This factor is the same at all wavelengths and therefore cancels out in calculating the passband.
T0 = (transmissivity at λ = λ0) = (1 − ρ)2; T = transmissivity at λ = (1 − ρ)2 e−χ(λ)d.
The edges of the passband are λ0 ± Δλ/2, and at the edge, since the light is attenuated η times, T/T0 = e−αd(Δλ/(2λ0))2 = 1/η. Corrected: the book wrote this ratio as η; attenuation by a factor η means T/T0 = 1/η, and the book's final result below follows from 1/η.
Thus Δλ/(2λ0) = √(ln η/(αd)), or
Δλ = 2λ0 √((1/(αd)) ln η).
Teacher's Note: Reflection factor cancels in T/T0; set e^(−αd(Δλ/2λ0)²) = 1/η and solve for Δλ.
Exam Note: Edges at λ0 ± Δλ/2; ratio equals 1/η.
Question 219. A point source of monochromatic light emitting a luminous flux Φ is positioned at the centre of a spherical layer of substance. The inside radius of the layer is a, the outside one is b. The coefficient of linear absorption of the substance is equal to χ, the reflection coefficient of the surfaces is equal to ρ. Neglecting the secondary reflections, find the intensity of light that passes through that layer.
Solution.
We have to derive the law of decrease of intensity in an absorbing medium, taking into account the natural geometrical fall-off (inverse square law) as well as absorption.
Consider a thin spherical shell of thickness dx and internal radius x. Let I(x) and I(x + dx) be the intensities at the inner and outer surfaces of this shell. Then 4πx2 I(x) e−χdx = 4π(x + dx)2 I(x + dx). Except for the factor e−χdx this is the usual equation. We rewrite it as
x2I(x) = I(x + dx)(x + dx)2(1 + χ dx) = (I + (dI/dx)dx)(x2 + 2x dx)(1 + χ dx),
or x2 dI/dx + χx2I + 2xI = 0. Hence d(x2I)/dx + χ(x2I) = 0, so x2I = C e−χx, where C is a constant of integration.
In our case we apply this equation for a ≤ x ≤ b. For x ≤ a the usual inverse square law gives I(a) = Φ/(4πa2). Hence C = (Φ/4π) eχa, and
I(b) = (Φ/(4πb2)) e−χ(b − a).
This does not take into account reflections. When we do that we get
I(b) = (Φ/(4πb2)) (1 − ρ)2 e−χ(b − a).
Teacher's Note: Absorption and inverse-square spreading combine: x²I = C·e^(−χx); apply between radii a and b.
Exam Note: Include 1/(4πb²), absorption over b−a, and (1−ρ)².
Question 220. How many times will the intensity of a narrow X-ray beam of wavelength 20 pm decrease after passing through a lead plate of thickness d = 1.0 mm if the mass absorption coefficient for the given radiation wavelength is equal to μ/ρ = 3.6 cm2/g?
Solution.
The transmission factor is e−μd and so the intensity will decrease eμd = e3.6 × 11.3 × 0.1 = 58.4 times (we have used μ = (μ/ρ) × ρ and the known density of lead, 11.3 g/cm3).
Teacher's Note: Convert mass coefficient to linear: μ = (μ/ρ)ρ, then decrease factor is e^(μd).
Exam Note: Use density of lead; d in cm.
Question 221. A narrow beam of X-ray radiation of wavelength 62 pm penetrates an aluminium screen 2.6 cm thick. How thick must a lead screen be to attenuate the beam just as much? The mass absorption coefficients of aluminium and lead for this radiation are equal to 3.48 and 72.0 cm2/g respectively.
Solution.
We require μPb dPb = μAl dAl, or (μPb/ρPb) ρPb dPb = (μAl/ρAl) ρAl dAl:
72.0 × 11.3 × dPb = 3.48 × 2.7 × 2.6, so dPb = 0.3 mm.
Teacher's Note: Equal attenuation means equal μd; convert each mass coefficient using its density.
Exam Note: Equate μd for both screens.
Question 222. Find the thickness of aluminium layer which reduces by half the intensity of a narrow monochromatic X-ray beam if the corresponding mass absorption coefficient is μ/ρ = 0.32 cm2/g.
Solution.
½ = e−μd, so d = ln 2/μ = ln 2/((μ/ρ)ρ) = 0.80 cm.
Teacher's Note: Half-value thickness d = ln2/μ, with μ = (μ/ρ)·ρ and ρ(Al) = 2.7 g/cm³.
Exam Note: Use ρ = 2.7 g/cm³ for aluminium.
Question 223. How many 50%-absorption layers are there in the plate reducing the intensity of a narrow X-ray beam η = 50 times?
Solution.
We require N layers where (½)N = 1/50, so N = ln 50/ln 2 = 5.6.
Teacher's Note: Each half-value layer halves intensity, so 2^N = 50 and N = ln50/ln2.
Exam Note: N need not be an integer.
IE Irodov Solutions for JEE Mathematics: IE Irodov Solutions Chapter 31 Dispersion And Absorption Of Light
Chapter-wise IE Irodov Solutions: IE Irodov Solutions Chapter 31 Dispersion And Absorption Of Light
Review detailed solutions for JEE Mathematics. The IE Irodov Solutions Chapter 31 Dispersion And Absorption Of Light PDF provides comprehensive answers mapped to standard IE Irodov Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Mastering Core Concepts with IE Irodov Solutions
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Next Steps in Your Mathematics Revision
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the IE Irodov book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.