ICSE Class 7 Physics Sample Paper with Solutions Set 03

Sample Question Papers for Class 7 Physics

Review targeted exam resources with the ICSE Class 7 Physics Sample Paper with Solutions Set 03. Built according to official ICSE standards for the 2026-27 academic year, these downloadable Class 7 Physics sample papers support effective revision and performance tracking.

Practice Class 7 Physics Exam Papers

View or download the dedicated ICSE Class 7 Physics Sample Paper with Solutions Set 03 resource below. Engaging with these sample papers under timed conditions ensures continuous academic progress and mastery of the 2026-27 exam format.

Question 1
Choose the correct answer out of the four available choices given under each question. [15]

1. What is the weight of a body of mass of 25 kg? (g = 9.8 m/s2) [1 Mark]
(A) 25N
(B) 25 kg
(C) 245 N
(D) 245 kg

Answer: (C) 245 N

\( W = mg = 25 \times 9.8 = 245 \text{ N} \).

Teacher's Note:
a) Weight is the force with which gravity pulls a mass, calculated using the formula \( W = mg \).
b) Ensure the unit for weight is always in Newtons (N), while mass is measured in kilograms (kg).

 

2. Sea water is denser than fresh water due to [1 Mark]
(A) Evaporation
(B) Mixing of sand
(C) Mixing of salts
(D) Stagnation

Answer: (C) Mixing of salts

Dissolved salts increase the mass per unit volume of water, thereby increasing its density.

Teacher's Note:
a) Impurities and dissolved mineral salts make sea water heavier and denser than pure fresh water.
b) Students often confuse evaporation with the cause of high density; evaporation increases salinity over time, but the presence of salts is the direct reason.

 

3. How much distance does a car cover when it moves 20 km to the east and then 60 km to the west? [1 Mark]
(A) 60 km
(B) 80 km
(C) 20 km
(D) 40 km

Answer: (B) 80 km

Distance is the total path length covered, regardless of direction: \( 20 \text{ km} + 60 \text{ km} = 80 \text{ km} \).

Teacher's Note:
a) Distance is a scalar quantity and always adds up, unlike displacement which considers direction.
b) Do not subtract the values; subtraction is only used if the question asks for the magnitude of final displacement.

 

4. Children below 5 years can hear sounds having a frequency up to [1 Mark]
(A) 20 KHz
(B) 30 KHz
(C) 25 KHz
(D) 40 KHz

Answer: (C) 25 KHz

Infants and young children possess a higher upper limit of hearing frequency compared to adults.

Teacher's Note:
a) The standard human audible range is 20 Hz to 20,000 Hz (20 kHz), but young children can hear up to 25 kHz.
b) Remember that as a person ages, the maximum audible frequency decreases.

 

5. Glass allows light to pass through it because it is [1 Mark]
(A) transparent
(B) opaque
(C) luminous
(D) non-luminous

Answer: (A) transparent

Transparent materials transmit light completely without scattering it significantly.

Teacher's Note:
a) Transparency is the property of a medium that permits light to travel through it clearly.
b) Do not confuse luminous (objects that emit their own light) with transparent (materials that allow light to pass).

 

6. When heat is absorbed, the temperature: [1 Mark]
(A) Increases
(B) Decreases
(C) Remains same
(D) Becomes zero

Answer: (A) Increases

Absorption of heat energy increases the kinetic energy of the particles, raising the temperature.

Teacher's Note:
a) Heat flows from a region of higher temperature to lower temperature, and adding heat raises thermal state.
b) An exception occurs during a phase change (like melting or boiling) where heat is absorbed without a change in temperature.

 

7. If an object is at the focus of a concave mirror, then the size of the image formed is [1 Mark]
(A) Diminished
(B) Highly diminished
(C) Highly enlarged
(D) Enlarged

Answer: (C) Highly enlarged

When an object is placed at the principal focus (F) of a concave mirror, the reflected rays become parallel and meet at infinity, forming a highly magnified image.

Teacher's Note:
a) Learn the standard mirror ray-diagram positions: object at F gives an image at infinity.
b) Conversely, when an object is at infinity, the image is formed at the focus and is highly diminished.

 

8. The degree of hotness or coldness of a body or environment is called [1 Mark]
(A) Pressure
(B) Temperature
(C) Melting point
(D) Boiling point

Answer: (B) Temperature

Temperature is the physical quantity that measures the degree of hotness or coldness.

Teacher's Note:
a) Temperature determines the direction of heat flow between two bodies in thermal contact.
b) Heat is the total energy, whereas temperature is the degree or intensity.

 

9. What is the angle between the incident and reflected rays when a ray of light is incident normally on a plane mirror? [1 Mark]
(A) \( 90^{\circ} \)
(B) \( 45^{\circ} \)
(C) \( 180^{\circ} \)
(D) \( 0^{\circ} \)

Answer: (D) \( 0^{\circ} \)

When a ray is incident normally, angle of incidence \( i = 0^{\circ} \). By laws of reflection, angle of reflection \( r = 0^{\circ} \), meaning the ray retraces its path, making the angle between them zero.

Teacher's Note:
a) Normal incidence means the ray strikes perpendicular to the mirror surface along the normal line.
b) Students frequently mistake the angle with the mirror surface (\( 90^{\circ} \)) as the angle of incidence; always measure angles with respect to the normal.

 

10. At what time during the day, will the shadow of a stick be shortest? [1 Mark]
(A) Dawn
(B) Mid-day
(C) Afternoon
(D) Dusk

Answer: (B) Mid-day

At mid-day, the Sun is vertically overhead, casting the shortest vertical shadow.

Teacher's Note:
a) Shadow length depends on the altitude of the Sun; higher the Sun, shorter the shadow.
b) Shadows are longest during dawn and dusk when the Sun is lowest on the horizon.

 

11. If the radius of curvature of a spherical mirror is 34.52 cm, then the focal length of that spherical mirror is [1 Mark]
(A) 17.26 cm
(B) -34.52 cm
(C) 69.04 cm
(D) 34.52 cm

Answer: (A) 17.26 cm

Focal length \( f = \frac{R}{2} = \frac{34.52}{2} = 17.26 \text{ cm} \).

Teacher's Note:
a) The focal length is always half of the radius of curvature for any spherical mirror.
b) Watch out for calculation errors when dividing decimal values.

 

12. A metal released in the electrolysis of a salt gets deposited on the [1 Mark]
(A) Anode
(B) Cathode
(C) Half on the anode and half on the cathode
(D) Sides of the container

Answer: (B) Cathode

Metal ions are positively charged cations, which are attracted toward the negatively charged cathode during electrolysis.

Teacher's Note:
a) Cations (metal ions) move to the cathode and get reduced by gaining electrons.
b) Anions (non-metal ions) move toward the anode.

 

13. Sound can travel through [1 Mark]
(A) gases only
(B) solids only
(C) liquids only
(D) solids, liquids and gases

Answer: (D) solids, liquids and gases

Sound requires a material medium for propagation, which can be solid, liquid, or gas.

Teacher's Note:
a) Sound waves are mechanical waves that need particles to transfer energy.
b) Sound cannot travel through a vacuum because there are no particles present.

 

14. Which of the following is used to make a periscope? [1 Mark]
(A) Concave mirror
(B) Convex mirror
(C) Plane mirror
(D) Lens

Answer: (C) Plane mirror

A periscope uses two plane mirrors placed parallel to each other at an angle of \( 45^{\circ} \) to reflect light around corners or obstacles.

Teacher's Note:
a) Plane mirrors allow reflection of images over obstacles without changing their size.
b) Periscopes are commonly used in submarines to view objects above the water surface.

 

15. Time period of a simple pendulum is given by the formula [1 Mark]
(A) \( T = \sqrt{\frac{g}{l}} \)
(B) \( T = 2\pi\sqrt{\frac{g}{l}} \)
(C) \( T = \sqrt{\frac{l}{g}} \)
(D) \( T = 2\pi\sqrt{\frac{l}{g}} \)

Answer: (D) \( T = 2\pi\sqrt{\frac{l}{g}} \)

The time period formula for a simple pendulum is directly proportional to the square root of length and inversely proportional to gravity.

Teacher's Note:
a) Always ensure terms are in correct position: length (\( l \)) in numerator and acceleration due to gravity (\( g \)) in denominator.
b) Memorize the constant factor \( 2\pi \) associated with the formula.

 

Question 2

(A) Answer the following questions in one word or one sentence. [5]

1. Name two household electric appliances which cool the surroundings. [1 Mark]

Answer:
Water cooler and air conditioner.

Teacher's Note:
a) Both appliances work on thermodynamic cooling principles to reduce ambient temperature.
b) Ensure both examples are clearly stated to secure full marks.

 

2. Write any one use of a pinhole camera. [1 Mark]

Answer:
A pinhole camera is used to capture the movement of the Sun over a long period of time (solargraphy).

Teacher's Note:
a) Pinhole cameras demonstrate the rectilinear propagation of light.
b) Mentioning solargraphy or observing solar eclipses safely are both acceptable uses.

 

3. What is the speed of sound when it travels through water? [1 Mark]

Answer:
Sound travels through water at a speed of approximately 1440 m/s.

Teacher's Note:
a) Sound travels faster in liquids than in gases due to closer molecular packing.
b) Always include the correct unit (m/s) with the numerical value.

 

4. State the relationship between focal length and radius of curvature of a spherical mirror. [1 Mark]

Answer:
Focal length is equal to half the radius of curvature (\( f = \frac{R}{2} \)).

Teacher's Note:
a) This fundamental relation holds true for both concave and convex mirrors of small aperture.
b) Can also be expressed as \( R = 2f \).

 

5. Define kilogram-force? [1 Mark]

Answer:
A kilogram-force is the force with which a mass of one kilogram is attracted by the Earth.

Teacher's Note:
a) Kilogram-force (kgf) is a gravitational unit of force.
b) 1 kgf is approximately equal to 9.8 Newtons.

 

(B) Fill up the blanks and rewrite the sentences: [5]

1. To test the purity of a sample of milk, we use a device called __________. [1 Mark]

Answer:
hydrometer (or lactometer)

Teacher's Note:
a) A hydrometer measures the relative density of liquids.
b) Specifically, a milk hydrometer is called a lactometer.

 

2. Light takes about ___________ to travel from the Sun to the Earth. [1 Mark]

Answer:
8 minutes

Teacher's Note:
a) Light travels at an approximate speed of \( 3 \times 10^8 \text{ m/s} \).
b) The exact time is about 8 minutes and 20 seconds.

 

3. Pitch increases with an increase in the _____________ of a vibrating body. [1 Mark]

Answer:
frequency

Teacher's Note:
a) Pitch is the human perception of the frequency of a sound wave.
b) Higher frequency results in a shriller, higher-pitched sound.

 

4. Non-uniform motion is also called ________ motion. [1 Mark]

Answer:
accelerated

Teacher's Note:
a) When speed changes continuously, the object experiences acceleration.
b) Non-uniform motion implies unequal distances covered in equal intervals of time.

 

5. Dry cell was invented by ________. [1 Mark]

Answer:
Leclanche

Teacher's Note:
a) Georges Leclanche invented the precursor to the modern dry cell battery.
b) Spelling should be precise as credited in scientific history.

 

Question 3

(A) Match the item in column I with the appropriate item in column II. [5]

Answer:

Column AColumn B
VelocityVector
NoiseIrregular vibration
Gas condenses into solidSolidification
Opaque mediumWood
1 N\( 10^5 \) dyne

Teacher's Note:
a) Matching questions test foundational knowledge across different chapters.
b) Ensure units and physical quantities are paired with accurate definitions.

 

(B) Define the following: [5]

1. Uniform Motion [1 Mark]

Answer:
If an object covers equal distances in equal intervals of time, we say that the object is in uniform motion.

Teacher's Note:
a) In uniform motion, the speed of the body remains constant throughout.
b) A distance-time graph for uniform motion is always a straight line.

 

2. Amplitude [1 Mark]

Answer:
The maximum displacement of a wave on either side of its mean position is known as the amplitude.

Teacher's Note:
a) Amplitude determines the loudness of a sound wave.
b) It is measured in meters (m).

 

3. Freezing [1 Mark]

Answer:
The process in which a liquid changes into the solid state at a constant temperature by releasing heat is called freezing.

Teacher's Note:
a) Freezing point is the exact temperature at which liquid transitions into solid.
b) Energy is released during the freezing process.

 

4. Virtual Image [1 Mark]

Answer:
The image which cannot be obtained on a screen is called a virtual image.

Teacher's Note:
a) Virtual images are always erect and formed by diverging light rays appearing to meet.
b) Plane mirrors always form virtual images.

 

5. Electrolysis [1 Mark]

Answer:
The process by which certain chemicals, in the molten state or in solution, break up into ions due to the passage of electric current through them is called electrolysis.

Teacher's Note:
a) Electrolysis involves chemical effects of electric current.
b) It is widely used in electroplating and metal extraction.

 

Question 4

(A) Identify and classify the following types of motions as rotatory, non-periodic, vibratory, rolling motion or uniform motion: [5]

Answer:

Motion DescriptionType of Motion
A spinning wheelRotatory motion
BreathingVibratory motion
A train is moving in straight trackUniform motion
Movement of a drillRolling motion
Motion of tides in the seaNon-Periodic motion

Teacher's Note:
a) Classification questions require precise matching with standard types of motion.
b) Drills combine rotational and translational movement, categorized under rolling or complex motion.

 

(B) Give one word for the following [5]

1. The motion in which an object does not cover equal distances in equal intervals of time. [1 Mark]

Answer:
Non-uniform motion

Teacher's Note:
a) Speed varies continuously in non-uniform motion.
b) Most everyday vehicle movements fall into this category.

 

2. The sound produced when two distinct sounds are heard due to the reflection of sound from a rigid smooth distance surface. [1 Mark]

Answer:
Echo

Teacher's Note:
a) Minimum distance required to hear a distinct echo is about 17 meters.
b) Persistence of human hearing is 1/10th of a second.

 

3. S.I. unit of temperature. [1 Mark]

Answer:
Kelvin

Teacher's Note:
a) Kelvin (K) is the SI unit, though Celsius and Fahrenheit are commonly used in daily life.
b) Absolute zero corresponds to 0 Kelvin.

 

4. The outer rim of the Sun. [1 Mark]

Answer:
Corona

Teacher's Note:
a) The corona is visible during a total solar eclipse.
b) It extends millions of kilometers into space.

 

5. Material which does not allow electric current to flow through a circuit. [1 Mark]

Answer:
Insulator

Teacher's Note:
a) Insulators have high electrical resistance.
b) Examples include rubber, wood, and plastic.

 

Question 5

(A) State whether the following statements are True or False [5]

1. Battery is a device which produces an electric current by means of a chemical reaction. [1 Mark]

Answer:
True

Teacher's Note:
a) Chemical energy is converted into electrical energy inside a battery.
b) Cells use electrolytes to facilitate this reaction.

 

2. A cork floats in water because its density is greater than that of water. [1 Mark]

Answer:
False (A cork floats in water because its density is lesser than that of water)

Teacher's Note:
a) An object floats if its density is less than the liquid's density.
b) Cork has low density, causing it to stay buoyant.

 

3. Conduction is possible in vacuum. [1 Mark]

Answer:
False (Conduction and convection require a material medium. Radiation is possible in vacuum.)

Teacher's Note:
a) Conduction requires direct particle-to-particle contact.
b) Radiation is the only mode of heat transfer that can travel through a vacuum.

 

4. Any polished or shining surface acts as a mirror. [1 Mark]

Answer:
True

Teacher's Note:
a) Smooth and polished surfaces reflect light regularly.
b) This regular reflection forms clear images.

 

5. For a moving object, displacement can be zero, but distance can never be zero. [1 Mark]

Answer:
True

Teacher's Note:
a) If an object returns to its starting point, its net displacement is zero.
b) Distance always accumulates positively as long as motion occurs.

 

(B)

1. Define rules to draw a ray diagram. [3 Marks]

Answer:
1. To construct a ray diagram, at least two rays whose paths can be traced after reflections are required.
2. An object is kept on the left side of the reflecting surface and not on the right side.
3. An object is always to be kept on the principal axis and its foot should touch the principal axis.

[Figure: Ray diagram setup showing a concave mirror, principal axis, object placed on the left, and reflection rays passing through focus and center of curvature]

Teacher's Note:
a) Adhering to standard sign conventions and placement rules ensures accurate image formation.
b) Always indicate arrowheads on light rays to show the direction of travel.

 

2. List three effects of rectilinear propagation of light. [2 Marks]

Answer:
1. Formation of shadows.
2. Formation of day and night.
3. Formation of image from a pinhole camera.

Teacher's Note:
a) Rectilinear propagation means light travels in a straight line in a homogenous medium.
b) Eclipses (solar and lunar) are also classic consequences of this property.

 

Question 6
Answer the following questions in short:

1. The distance between two stations is 560 km. A train takes 480 minutes to cover this distance. Calculate the speed of the train. [2 Marks]

Answer:
Distance = 560 km
Time taken = 480 min = \( \frac{480}{60} = 8 \text{ hours} \)
Speed of train = \( \frac{\text{Distance travelled}}{\text{Time taken}} = \frac{560 \text{ km}}{8 \text{ h}} = 70 \text{ km/h} \).

Teacher's Note:
a) Convert minutes into hours before applying the speed formula to maintain consistent units.
b) Formula used: Speed = Distance / Time.

 

2. Why do we use wooden handles in frying pans? [2 Marks]

Answer:
The material of pans is a good conductor of heat. Hence, a wooden handle (which is a bad conductor of heat) is used in a frying pan so that it does not get heated by conduction, allowing safe handling.

Teacher's Note:
a) Metals conduct heat rapidly, making bare handles dangerously hot.
b) Wood acts as a thermal insulator preventing heat transfer to the user's hand.

 

3. Draw a diagram to show the formation of image of a point object in a plane mirror. [2 Marks]

Answer:
1. Light rays from point object O strike the mirror M M1.
2. The reflected rays appear to diverge from point I behind the mirror, forming a virtual image.
3. Perpendicular distances from object and image to the mirror surface are equal.

[Figure: Diagram showing a plane mirror surface M-M1, object point O in front, reflected rays AB and CD, normal lines N1 and N2, and virtual image point I formed behind the mirror]

Teacher's Note:
a) Ensure dotted lines are used to represent virtual rays behind the mirror.
b) Label object as O and image as I clearly.

 

4. We should not be barefooted while repairing or replacing any electrical components. Give reasons. [2 Marks]

Answer:
We should not be barefooted because if there is damage or a cut in the wire, current may leak and flow through our body to the ground, resulting in severe electrical shocks.

Teacher's Note:
a) The human body is a good conductor of electricity, completing the circuit with the earth.
b) Wearing rubber footwear provides insulation against ground-connected shocks.

 

5. When does a lunar eclipse take place? [2 Marks]

Answer:
A lunar eclipse takes place when the Earth comes in between the Sun and the Moon, obstructing sunlight from reaching the Moon.

Teacher's Note:
a) This alignment occurs only on a full moon day.
b) The Earth's shadow falls on the Moon, making it temporarily invisible or darkened.

 

Question 7

(A)

1. Describe the working of a beam balance. [4 Marks]

Answer:
1. A beam balance consists of a horizontal beam supported freely at its center with a pointer attached.
2. Two identical pans are suspended at equal distances from the center by strings of equal length.
3. The object whose mass is measured is placed on one pan, and standard known masses are placed on the other.
4. Masses are added or removed until the beam becomes completely horizontal and the pointer is vertical, indicating equilibrium, at which point the sum of standard masses equals the object's mass.

[Figure: Diagram of a beam balance showing central fulcrum, pointer, horizontal beam, equal chains, left pan with unknown mass, and right pan with standard mass weights]

Teacher's Note:
a) The principle of moments is applied when the beam balances horizontally.
b) Accurate measurements rely on equal arm lengths and precise standard weights.

 

2. How can you identify a plane mirror, a concave mirror and a convex mirror without touching them? [3 Marks]

Answer:
Different types of mirrors can be identified by observing the nature of the image formed of our face:
1. Plane mirror - Produces a virtual, erect image of the same size as our face.
2. Concave mirror - Produces a virtual, erect, and magnified image of our face when held close.
3. Convex mirror - Produces a virtual, erect, and diminished (smaller) image of our face.

Teacher's Note:
a) Image characteristics change distinctively based on mirror curvature.
b) This is a safe non-contact visual test for optical classification.

 

(B)

1. Difference between a shadow and an image of any object. [3 Marks]

Answer:

ImageShadow
Image is formed due to reflection or refraction.Shadow is formed when light falls on an opaque object.
Image is seen when light coming from the object after reflection or refraction enters the observer's eye.No light enters the eye from the shadow of the object (it is an absence of light).
Image gives more information such as colour, structure, etc. about the object.Shadow does not provide any details about the object but gives an idea about the shape of the object.

Teacher's Note:
a) Shadows only outline the dark silhouette, whereas images preserve optical details and colors.
b) Presenting differences in a comparative tabular format is ideal for scoring full marks.

Model Practice Papers & Solutions for Class 7 Physics

Download Sample Paper: ICSE Class 7 Physics Sample Paper with Solutions Set 03 (Class 7 Physics)

Access structured sample papers for Class 7 Physics. Solving the ICSE Class 7 Physics Sample Paper with Solutions Set 03 provided above helps students understand official exam blueprints and tackle anticipated question formats with confidence.

Maximize Your Scores with Model Papers

  • Curriculum Insights: Clarify chapter-wise weightage rules and question trends across Class 7.
  • Gap Analysis: Check performance drops across sets to isolate specific Class 7 Physics topics needing extra attention.
  • Time Efficiency: Working through objective and descriptive problems builds critical pacing to finish exams comfortably.

Steps to Follow After Completing ICSE Class 7 Physics Sample Paper with Solutions Set 03

  1. Self-Evaluation: Score your answers using official guidance to track your academic progress.
  2. Mistake Correction: Class 7 pupils must re-solve questions answered incorrectly to master the correct method.
  3. Continuous Practice: Take additional Physics sample modules online to maximize preparedness for ICSE evaluations.

FAQs

Where can I download the PDF for ICSE Class 7 Physics Sample Paper with Solutions Set 03?

You can download the complete PDF for ICSE Class 7 Physics Sample Paper with Solutions Set 03 for free from StudiesToday.com. Our resources for Class 7 Physics are updated for the latest academic session and follow the official exam pattern.

Are solutions provided for ICSE Class 7 Physics Sample Paper with Solutions Set 03?

Yes, ICSE Class 7 Physics Sample Paper with Solutions Set 03 comes with detailed, teacher-verified solutions. We have provided step-by-step answers for Physics to help students of Class 7 understand correct methodology and marking scheme.

How can practicing ICSE Class 7 Physics Sample Paper with Solutions Set 03 help in exam preparation?

Practicing this Physics paper helps in time management and identifying important topics. For Class 7, solving mock papers is the best way to gain confidence and reduce exam-day anxiety.

Is the ICSE Class 7 Physics Sample Paper with Solutions Set 03 accessible on mobile and tablets?

Yes, all our study materials for Class 7 Physics are provided in a mobile-friendly PDF format. You can easily download ICSE Class 7 Physics Sample Paper with Solutions Set 03 on your mobile device.