Maths Objective Questions and Answers: Chapter 19 Constructions
Explore reliable objective questions for Chapter 19 Constructions tailored for Class 10 learners. Utilizing these Maths multiple-choice formats ensures thorough preparation and strengthens problem-solving speed for upcoming school assessments.
Download Chapter 19 Constructions MCQs with Answers
Access the complete set of multiple-choice questions for Chapter 19 Constructions below. This focused format allows students to isolate specific topics for thorough review and uninterrupted practice alongside official ICSE Board textbooks.
Four Mark Questions
Question 1: Using ruler and compass construct a triangle ABC in which AB = 6 cm, ∠BAC = 120° and AC = 5 cm. Construct a circle passing through A, B, and C. Measure and write down the radius of the circle.
Answer:
Steps of Construction:
1. Draw a line segment AB = 6 cm.
2. At A, draw a ray AX making ∠XAB = 120°.
3. With A as centre and radius 5 cm, cut AX at C. So AC = 5 cm.
4. Join BC. Then ΔABC is the required triangle.
5. Draw the perpendicular bisectors of AB and AC; they meet at O.
6. With centre O and radius OA (= OB = OC), draw the circle. It passes through A, B and C.
On measuring, OA = 5.5 cm, so the radius of the circumcircle is about 5.5 cm.
Check: BC² = 6² + 5² − 2(6)(5)cos 120° = 91, so BC ≈ 9.54 cm and R = BC ÷ (2 sin 120°) ≈ 5.51 cm.
Exam Tips:
a) Use a protractor at A for the 120° angle and cut AC = 5 cm with the compass.
b) The triangle is obtuse at A, so the circumcentre O lies outside ΔABC.
c) Two perpendicular bisectors are enough to fix O; use an arc radius greater than half the side.
d) Verify the reading with R = BC ÷ (2 sin 120°) ≈ 5.51 cm.
Question 2: Draw a circle of radius 4 cm. Draw two tangents to this circle so that the angle between the tangents is 60°.
Answer:
Steps of Construction:
1. Draw a circle of radius 4 cm with centre O.
2. The angle between the tangents is 60°, so the angle between the two radii to the points of contact is 180° − 60° = 120°. Draw radii OA and OB with ∠AOB = 120°.
3. At A draw AP ⊥ OA, and at B draw BP ⊥ OB (each of 90°). Let them meet at P.
4. Then ∠APB = 60°, and PA and PB are the required tangents.
Check: in quadrilateral OAPB, ∠P = 360° − 90° − 90° − 120° = 60°. Also OP = 4 ÷ cos 60° = 8 cm and each tangent PA = PB = 4√3 ≈ 6.93 cm.
Exam Tips:
a) Angle between tangents + angle between the radii at the contact points = 180°.
b) A tangent is perpendicular to the radius at the point of contact, so use a set square at A and B.
c) In quadrilateral OAPB the angles are 90°, 90°, 120° and 60°, which add up to 360°.
d) Use OP = 8 cm and PA = PB ≈ 6.93 cm to check your final figure.
Question 3: Using ruler and compass construct a ΔABC where AB = 3 cm, BC = 4 cm and ∠ABC = 90°. Hence construct a circle circumscribing the ΔABC. Measure and write down the radius of the circle.
Answer:
Steps of Construction:
1. Draw BC = 4 cm.
2. At B, draw a ray BX making ∠CBX = 90°, and cut off BA = 3 cm along BX.
3. Join AC. Then ΔABC is the required triangle.
4. Draw the perpendicular bisectors of BC and AB; they meet at O (the mid-point of AC).
5. With centre O and radius OA, draw a circle. It passes through A, B and C.
On measuring, OA = OB = OC = 2.5 cm.
Check: AC = √(3² + 4²) = 5 cm, and the hypotenuse is a diameter, so radius = 5 ÷ 2 = 2.5 cm.
Exam Tips:
a) Build the 90° at B with a set square or by arcs, then cut BA = 3 cm.
b) In a right triangle the circumcentre is the mid-point of the hypotenuse AC.
c) AC = 5 cm (3-4-5 triangle), so the radius is 2.5 cm; use this to check your reading.
d) Draw the circle with the compass kept fixed at OA so that it passes through B as well.
Question 4: Construct a triangle ABC, given AB = 4 cm, BC = 6 cm and ∠ABC = 90°. Construct a circle which passes through the points A, B and C. Mark its centre as O.
Answer:
Steps of Construction:
1. Draw a line segment BC = 6 cm.
2. At B, draw a ray BX making ∠CBX = 90°, and cut off BA = 4 cm.
3. Join AC. Then ΔABC is the required triangle.
4. Draw the perpendicular bisectors of AB and BC; they meet at O.
5. With centre O and radius OA (= OB = OC), draw the circle. It passes through A, B and C.
O is the mid-point of AC.
Check: AC = √(4² + 6²) = √52 ≈ 7.21 cm, so the radius = 3.61 cm.
Exam Tips:
a) The angle in a semicircle is 90°, so for a right triangle the centre O falls on the mid-point of the hypotenuse AC.
b) Draw the perpendicular bisectors of AB and BC with the same arc radius on both sides.
c) The radius is half of AC, about 3.61 cm; use it to check the circle.
d) Mark O clearly with a dot and label it, as the question asks for the centre.
Question 5: Construct a triangle DEF, with DE = 6 cm, ∠FDE = 60° and ∠FED = 45°. Circumscribe a circle about the triangle.
Answer:
Steps of Construction:
1. Draw a line segment DE = 6 cm.
2. At D draw a ray making 60° with DE, and at E draw a ray making 45° with ED. Let the rays meet at F.
3. Then ΔDEF is the required triangle (∠F = 75°).
4. Draw the perpendicular bisectors of DE and EF; they meet at O.
5. With centre O and radius OD (= OE = OF), draw the circle. It passes through D, E and F.
Check: R = DE ÷ (2 sin 75°) = 6 ÷ (2 × 0.9659) ≈ 3.11 cm.
Exam Tips:
a) Measure 60° at D and 45° at E on the same side of DE so that the rays meet.
b) The third angle is 180° − 60° − 45° = 75°, so the triangle is acute and O lies inside it.
c) Radius from the sine rule: R = DE ÷ (2 sin 75°) ≈ 3.11 cm.
d) Two perpendicular bisectors are enough; the third side is a check that the circle passes through all vertices.
Question 6: Construct a ΔPQR, given PQ = 5 cm, QR = 7 cm and ∠PQR = 60°. Inscribe a circle in the triangle.
Answer:
Steps of Construction:
1. Draw a line segment QR = 7 cm.
2. At Q, draw a ray QX making ∠RQX = 60°, and cut off QP = 5 cm.
3. Join PR. Then ΔPQR is the required triangle.
4. Draw the bisectors of ∠Q and ∠R; let them meet at I.
5. From I, draw ID ⊥ QR meeting QR at D.
6. With centre I and radius ID, draw a circle. It touches all three sides of the triangle.
Check: PR² = 5² + 7² − 2(5)(7)cos 60° = 39, so PR ≈ 6.24 cm. Area = ½ × 5 × 7 × sin 60° ≈ 15.16 cm², s = 9.12 cm and r = area ÷ s ≈ 1.66 cm.
Exam Tips:
a) The incentre is the point where the internal angle bisectors meet, so it always lies inside the triangle.
b) The radius of the incircle is the perpendicular distance ID from I to a side.
c) Two angle bisectors are enough; the third is a check.
d) r = area ÷ s ≈ 1.66 cm gives a quick check of the circle you draw.
Question 7: Construct a regular hexagon of side 3.5 cm. Construct a circumcircle of the hexagon.
Answer:
Steps of Construction:
1. Draw AB = 3.5 cm.
2. At A and B draw rays AX and BY, each making an angle of 120° with AB (on the same side).
3. Cut AF = 3.5 cm from AX and BC = 3.5 cm from BY.
4. At F and C repeat the same two steps: draw rays making 120° with FA and CB, and cut FE = CD = 3.5 cm. Join DE to get the regular hexagon ABCDEF.
5. Draw the perpendicular bisectors of AB and BC; they meet at O.
6. With centre O and radius OA, draw a circle. It passes through all six vertices.
The circumradius of a regular hexagon equals its side, so OA = 3.5 cm.
Exam Tips:
a) Each interior angle of a regular hexagon is 120°, and all sides are equal.
b) The circumradius equals the side, so the radius of the circle is 3.5 cm.
c) The centre O is where the perpendicular bisectors of two adjacent sides meet.
d) Use the same compass opening of 3.5 cm for every side so that the hexagon closes exactly.
Question 8: Construct a regular hexagon of side 5 cm. Inscribe a circle in it.
Answer:
Steps of Construction:
1. Draw AB = 5 cm.
2. At A and B draw rays making 120° with AB, and cut off AF = BC = 5 cm.
3. At C draw a ray making 120° with CB and cut off CD = 5 cm.
4. With centres D and F and radius 5 cm, draw arcs meeting at E. Join DE and FE. Then ABCDEF is the regular hexagon.
5. Draw the bisectors of ∠A and ∠B; they meet at I.
6. From I draw IL ⊥ AB.
7. With centre I and radius IL, draw a circle. It touches all six sides of the hexagon.
Radius of the inscribed circle = (√3 ÷ 2) × 5 ≈ 4.33 cm.
Exam Tips:
a) Each interior angle is 120°, so the bisectors at A and B each make 60° with the sides.
b) The inscribed circle touches the sides, so its radius is the perpendicular IL from the centre to a side.
c) Inradius = side × √3 ÷ 2 ≈ 4.33 cm for this hexagon.
d) The point E is found with equal arcs of 5 cm from D and F, which also checks that the hexagon closes.
Question 9: Construct ΔPQR, QR = 5 cm, ∠PQR = 60° and perpendicular from P to QR is 3 cm. Draw an incircle of ΔPQR.
Answer:
Steps of Construction:
1. Draw a line segment QR = 5 cm.
2. At Q, draw a ray QX making ∠RQX = 60°.
3. At Q draw a perpendicular to QR and cut off QS = 3 cm. Through S draw a line parallel to QR meeting QX at P (so P is 3 cm above QR).
4. Join PR. Then ΔPQR is the required triangle.
5. Draw the bisectors of ∠Q and ∠R; they meet at I. From I draw IL ⊥ QR.
6. With centre I and radius IL, draw a circle which touches the sides of ΔPQR.
Check: PQ = 3 ÷ sin 60° ≈ 3.46 cm, PR ≈ 4.44 cm, area = ½ × 5 × 3 = 7.5 cm², s ≈ 6.45 cm and r = area ÷ s ≈ 1.16 cm.
Exam Tips:
a) The height of 3 cm fixes P: it lies on the line parallel to QR drawn 3 cm above it, on the 60° ray.
b) The incentre is where the internal bisectors of ∠Q and ∠R meet.
c) Inradius = area ÷ s = 7.5 ÷ 6.45 ≈ 1.16 cm.
d) After drawing IL ⊥ QR, keep that radius for the circle so that it touches all three sides.
Question 10: Draw an equilateral triangle of side 4 cm. Draw its circumcircle.
Answer:
Steps of Construction:
1. Draw a line segment BC = 4 cm.
2. With centres B and C and radius 4 cm, draw two arcs intersecting at A.
3. Join AB and AC. Then ΔABC is the required equilateral triangle.
4. Draw the perpendicular bisectors of BC and AC; they meet at O.
5. With centre O and radius OA (= OB = OC), draw the circle. It passes through A, B and C.
Check: R = side ÷ √3 = 4 ÷ √3 ≈ 2.31 cm.
Exam Tips:
a) In an equilateral triangle the circumcentre, incentre and centroid are the same point.
b) R = side ÷ √3 ≈ 2.31 cm, which you can use to check the circle.
c) Use the same compass opening of 4 cm for all three sides.
d) The circumcentre lies on the altitude from each vertex, so the bisectors pass through the opposite vertices.
Question 11: Construct ΔABC, BC = 6 cm, ∠ABC = 45° and perpendicular from A to BC is 3.5 cm. Construct a circumcircle of the triangle.
Answer:
Steps of Construction:
1. Draw a line segment BC = 6 cm.
2. At B, draw a ray BY making ∠CBY = 45°.
3. At B draw BX ⊥ BC and cut off BP = 3.5 cm. Through P draw a line parallel to BC meeting BY at A. Then the perpendicular from A to BC is 3.5 cm.
4. Join AC. Then ΔABC is the required triangle.
5. Draw the perpendicular bisectors of BC and CA; they meet at O.
6. With centre O and radius OA (= OB = OC), draw the circle. It passes through A, B and C.
Check: A is 3.5 cm above BC and, because ∠B = 45°, 3.5 cm from B horizontally, so AC = √(2.5² + 3.5²) ≈ 4.3 cm and R = AC ÷ (2 sin 45°) ≈ 3.04 cm.
Exam Tips:
a) Draw the 45° ray first, then use the 3.5 cm height to locate A on that ray.
b) With ∠B = 45°, the height 3.5 cm equals the horizontal distance of A from B, a quick check on your drawing.
c) Perpendicular bisectors of BC and CA meet at O; keep OA as the radius.
d) Check the circle with R = AC ÷ (2 sin 45°) ≈ 3.04 cm.
Question 12: Only ruler and compass may be used in this question.
(i) Construct ΔABC such that AB = AC = 7 cm and BC = 5 cm.
(ii) Draw AX, the perpendicular bisector of side BC.
(iii) Draw a circle with centre A and radius 3 cm cutting AX at Y.
(iv) Construct another circle to touch the circle with centre A externally at Y and passing through B and C.
Answer:
Steps of Construction:
1. Draw BC = 5 cm. With centres B and C and radius 7 cm, draw arcs meeting at A. Join AB and AC.
2. Draw the perpendicular bisector of BC; it passes through A, so AX is this bisector and it meets BC at D.
3. With centre A and radius 3 cm, draw a circle cutting AX at Y (AY = 3 cm, so Y lies between A and D).
4. Join BY and draw its perpendicular bisector. Let it meet AX at O.
5. With centre O and radius OY (= OB = OC), draw a circle. It passes through B and C and touches the circle with centre A externally at Y, because O, Y and A lie on one straight line.
Check: AD = √(7² − 2.5²) ≈ 6.54 cm, AY = 3 cm, and OB = OY ≈ 2.65 cm with O between Y and D.
Exam Tips:
a) The perpendicular bisector of BC passes through the apex A because AB = AC.
b) Two circles touch externally at Y when their centres A and O and the point Y lie on one line, so O must be on AX.
c) O is equidistant from B and Y, so it lies on the perpendicular bisector of BY.
d) The distance between the centres is AO = 3 + 2.65 cm, the sum of the two radii.
Question 13: In ΔABC, AB = BC = 4.5 cm and AC = 2.8 cm. Draw the circle passing through A, B and C.
Answer:
Steps of Construction:
1. Draw AC = 2.8 cm.
2. With centres A and C and radius 4.5 cm each, draw arcs meeting at B. Join AB and BC.
3. Draw the perpendicular bisectors of AC and AB; they meet at O.
4. With centre O and radius OA (= OB = OC), draw the circle. It passes through A, B and C.
Check: R = (AB × BC × AC) ÷ (4 × area) = (4.5 × 4.5 × 2.8) ÷ (4 × 5.99) ≈ 2.37 cm.
Exam Tips:
a) Use the base AC = 2.8 cm and equal arcs of 4.5 cm from A and C to fix B; the triangle is isosceles.
b) The perpendicular bisector of AC also passes through B, so it is a good second line for finding O.
c) The circumradius is about 2.37 cm.
d) The triangle is acute, so O lies inside it.
Question 14: Draw two concentric circles of radii 3 cm and 5 cm. Taking a point P on the outer circle, construct the pair of tangents to the inner circle.
Answer:
Steps of Construction:
1. Draw a circle of radius 3 cm with centre O, and another circle of radius 5 cm with the same centre O.
2. Take a point P on the outer circle and join OP.
3. Draw the perpendicular bisector of OP, meeting OP at M.
4. With M as centre and radius MO (= MP), draw a circle. It cuts the inner circle at A and B.
5. Join PA and PB. These are the required tangents to the inner circle.
Check: ∠OAP = 90° (angle in a semicircle), so PA = PB = √(5² − 3²) = 4 cm.
Exam Tips:
a) Draw the circle on OP as diameter: any angle in a semicircle is 90°, so ∠OAP = ∠OBP = 90°.
b) A tangent is perpendicular to the radius at the point of contact, which is why A and B give tangents.
c) Each tangent has length √(5² − 3²) = 4 cm, a quick check on your drawing.
d) Find the mid-point M of OP with the perpendicular bisector, not by eye.
Question 15: Without calculating base angles, construct an isosceles ΔPQR whose base QR = 6 cm and ∠QPR = 75°. Draw the circumcircle of ΔPQR.
Answer:
Steps of Construction:
1. Draw QR = 6 cm and draw its perpendicular bisector.
2. At Q draw a ray QX making ∠RQX = 75°, with X on the opposite side of QR from where P will lie (below QR).
3. At Q draw QN ⊥ QX (on the upper side). Let QN meet the perpendicular bisector of QR at O.
4. With centre O and radius OQ, draw the circle. It meets the perpendicular bisector (above QR) at P.
5. Join PQ and PR. Then ΔPQR is isosceles with PQ = PR and ∠QPR = 75°.
Reason: QX is a tangent at Q (it is perpendicular to the radius OQ), so by the tangent-chord theorem ∠QPR = ∠XQR = 75°.
Check: R = 6 ÷ (2 sin 75°) ≈ 3.11 cm and the height of P above QR ≈ 3.91 cm.
Exam Tips:
a) The angle between a tangent and a chord equals the angle in the alternate segment, which is why ∠XQR = 75° gives ∠QPR = 75°.
b) The perpendicular at Q to QX passes through the centre, so O is where it meets the perpendicular bisector of QR.
c) P lies on the perpendicular bisector, which makes PQ = PR.
d) Take P on the side of QR opposite to X; the other intersection would give 105° at the vertex.
Question 16: Construct a ΔABC with BC = 6.5 cm, AB = 5.5 cm and AC = 5 cm. Construct the incircle of the triangle. Measure the radius of the incircle.
Answer:
Steps of Construction:
1. Draw BC = 6.5 cm.
2. With centres B and C and radii 5.5 cm and 5 cm, draw arcs meeting at A. Join AB and AC. Then ΔABC is the required triangle.
3. Draw the bisectors of ∠B and ∠C; they meet at I.
4. From I draw ID ⊥ BC.
5. With centre I and radius ID, draw the incircle. It touches AB, BC and CA.
On measuring, ID ≈ 1.6 cm.
Check: s = (6.5 + 5.5 + 5) ÷ 2 = 8.5 cm, area = √(8.5 × 2 × 3 × 3.5) ≈ 13.36 cm², r = area ÷ s ≈ 1.57 cm.
Exam Tips:
a) Use arcs of 5.5 cm from B and 5 cm from C to fix A; do not swap the radii.
b) The incentre I is where the internal bisectors of ∠B and ∠C meet.
c) Using Heron's formula, r = area ÷ s ≈ 1.57 cm, so your measured radius should be about 1.6 cm.
d) Measure the radius as the perpendicular distance ID from I to BC.
Question 17: Using ruler and compasses only, draw an equilateral triangle of height 6 cm and draw its inscribed circle. Measure the radius of the circle.
Answer:
Steps of Construction:
1. Draw a line XY and take a point D on it.
2. At D draw DA ⊥ XY and cut off DA = 6 cm.
3. At A draw rays making 30° with AD on both sides, meeting XY at B and C. Then ΔABC is equilateral (∠B = ∠C = 60°).
4. Draw the bisectors of ∠B and ∠C; they meet at I (on AD).
5. From I draw a perpendicular to BC (it falls at D). With centre I and radius ID, draw a circle. It touches the three sides internally.
On measuring, the radius ID = 2 cm.
Check: side = 6 ÷ sin 60° = 4√3 ≈ 6.93 cm, and the inradius = height ÷ 3 = 2 cm.
Exam Tips:
a) An equilateral triangle has its apex angle 60°, so each half-angle at A is 30°.
b) The incentre is also the centroid, so it is one third of the height from the base: ID = 6 ÷ 3 = 2 cm.
c) The side comes out as 4√3 ≈ 6.93 cm; use it to check the base BC.
d) The bisector of the angle at A is the line AD itself, so only the bisectors at B and C are needed.
Question 18: Using a ruler and a pair of compasses only, construct:
(a) a triangle ABC, given AB = 4 cm, BC = 6 cm and ∠ABC = 90°.
(b) a circle which passes through the points A, B and C and mark its centre as O.
Answer:
Steps of Construction:
1. Draw a line segment BC = 6 cm.
2. At B, draw a ray BX making ∠CBX = 90°, and cut off BA = 4 cm.
3. Join AC. Then ΔABC is the required triangle.
4. Draw the perpendicular bisectors of AB and BC; they meet at O.
5. With centre O and radius OA (= OB = OC), draw the circle. It passes through A, B and C.
O is the mid-point of AC.
Check: AC = √(4² + 6²) = √52 ≈ 7.21 cm, so the radius = 3.61 cm.
Exam Tips:
a) Part (a): construct BC first, then the 90° at B, and cut BA = 4 cm.
b) Part (b): the circumcentre O is where the perpendicular bisectors of any two sides meet.
c) For a right triangle, O lies on the hypotenuse AC at its mid-point.
d) Radius OA = OB = OC ≈ 3.61 cm; use it to check the circle.
Question 19: Draw a circle of radius 4 cm. Draw two tangents to the circle inclined at an angle of 60° to each other.
Answer:
Steps of Construction:
1. Draw a circle with centre O and radius 4 cm.
2. Draw two radii OA and OB inclined to each other at 120° (since 180° − 60° = 120°).
3. Draw AP ⊥ OA at A and BP ⊥ OB at B; they meet at P.
4. PA and PB are the required tangents, inclined at 60° to each other.
Check: OP = 4 ÷ cos 60° = 8 cm and PA = PB = 4 tan 60° = 4√3 ≈ 6.93 cm.
Exam Tips:
a) The angle between the tangents is 180° minus the angle between the radii at the points of contact.
b) Each tangent is perpendicular to its radius, so use a set square at A and B.
c) Quadrilateral OAPB has angles 90°, 90°, 120°, 60°.
d) The radius is 4 cm; take care not to use a different radius while drawing the circle.
Question 20: In ΔABC, AB = 5 cm, BC = 6.5 cm and CA = 4.8 cm. Draw the circumcircle of ΔABC.
Answer:
Steps of Construction:
1. Draw BC = 6.5 cm.
2. With centre B and radius 5 cm and with centre C and radius 4.8 cm, draw arcs meeting at A. Join AB and AC.
3. Draw the perpendicular bisectors of AC and BC; they meet at O.
4. With centre O and radius OA (= OB = OC), draw the circle. It passes through A, B and C.
Check: R = abc ÷ (4 × area) = (5 × 6.5 × 4.8) ÷ (4 × 11.91) ≈ 3.27 cm.
Exam Tips:
a) Arcs of 5 cm from B and 4.8 cm from C meet at A; keep the radii in this order.
b) The longest side is BC = 6.5 cm, and 6.5² < 5² + 4.8², so the triangle is acute and O lies inside.
c) The circumradius is about 3.27 cm.
d) After finding O, keep the same radius so that the circle passes through all three vertices.
Question 21: Construct a regular hexagon of side 4 cm. Construct a circle circumscribing the hexagon.
Answer:
Steps of Construction:
1. Draw AB = 4 cm.
2. At A and B draw rays AX and BY, each making an angle of 120° with AB.
3. Cut AF = 4 cm from AX and BC = 4 cm from BY.
4. At F and C repeat the process: make 120° with FA and CB and cut FE = CD = 4 cm. Join DE. Then ABCDEF is the regular hexagon.
5. Draw the perpendicular bisectors of AB and BC; they meet at O.
6. With centre O and radius OA, draw the circle. It passes through all the vertices of the hexagon.
The circumradius equals the side of the hexagon, so OA = 4 cm.
Exam Tips:
a) Every interior angle of a regular hexagon is 120°.
b) The circumradius equals the side, so the circle has radius 4 cm.
c) O is the point where the perpendicular bisectors of two adjacent sides meet.
d) If DE does not close at the last vertex, recheck the 120° angles drawn at F and C.
Question 22: Draw an isosceles ΔABC in which base BC = 6 cm and the altitude from vertex to the base is 4 cm. Draw its inscribed circle.
Answer:
Steps of Construction:
1. Draw BC = 6 cm.
2. Draw the perpendicular bisector of BC meeting BC at D, and cut off DA = 4 cm on it.
3. Join AB and AC. Then ΔABC is the required isosceles triangle (AB = AC = 5 cm).
4. Draw the bisectors of ∠B and ∠C; they meet at I.
5. With centre I and radius ID (perpendicular to BC), draw a circle. It touches the three sides.
Check: AB = AC = √(3² + 4²) = 5 cm, area = ½ × 6 × 4 = 12 cm², s = 8 cm, so r = 12 ÷ 8 = 1.5 cm.
Exam Tips:
a) The altitude from A lies on the perpendicular bisector of BC in an isosceles triangle, so one construction gives both.
b) The equal sides come out as 5 cm (3-4-5 right triangle ABD).
c) The inradius is area ÷ s = 12 ÷ 8 = 1.5 cm, which should match your circle.
d) The bisectors of the base angles meet on AD, so I lies on the altitude.
Question 23: Draw a circle of radius 3.5 cm. From a point P, 6 cm from its centre, draw two tangents to the circle.
Answer:
Steps of Construction:
1. Draw a circle with centre O and radius 3.5 cm.
2. Mark a point P with OP = 6 cm and join OP.
3. Draw the perpendicular bisector of OP; let it meet OP at M.
4. With centre M and radius MO (= MP), draw a circle. It cuts the given circle at Q and Q'.
5. Join PQ and PQ'. These are the required tangents.
Check: ∠OQP = 90° (angle in a semicircle), so PQ = PQ' = √(6² − 3.5²) ≈ 4.87 cm.
Exam Tips:
a) The circle on OP as diameter makes ∠OQP = 90°, so PQ is perpendicular to the radius OQ and is a tangent.
b) Each tangent has length √(OP² − r²) ≈ 4.87 cm.
c) Use the same arc radius on both sides when bisecting OP so that M is the exact mid-point.
d) The two tangents are equal in length and symmetric about OP.
Question 24: Draw a circle of radius 2.5 cm. Mark a point P at a distance of 6.5 cm from the centre of the circle. Draw two tangents to the circle from P and measure the length of each.
Answer:
Steps of Construction:
1. Draw a circle of radius 2.5 cm with centre O.
2. Mark a point P with OP = 6.5 cm.
3. Draw the perpendicular bisector of OP, meeting it at M, and draw the circle with OP as diameter (centre M, radius MO). It cuts the given circle at T and S.
4. Join PT and PS. These are the required tangents.
On measuring, PT = PS = 6 cm.
Check: PT = √(6.5² − 2.5²) = √36 = 6 cm.
Exam Tips:
a) The length of a tangent from an external point is √(OP² − r²) = √(42.25 − 6.25) = 6 cm.
b) The two tangent lengths from P are always equal, so measure both as a check.
c) The angle in a semicircle is 90°, which is why OT ⊥ PT.
d) Write the length with its unit after measuring.
Question 25: Using a ruler and a pair of compass only, construct
(i) a ΔABC, given AB = 4 cm, BC = 6 cm and ∠ABC = 90°.
(ii) a circle that passes through the point A, B and C and mark its centre as O.
Answer:
Steps of Construction:
1. Draw a line segment BC = 6 cm.
2. At B, draw a ray BX making ∠CBX = 90°, and cut off BA = 4 cm.
3. Join AC. Then ΔABC is the required triangle.
4. Draw the perpendicular bisectors of AB and BC; they meet at O.
5. With centre O and radius OA (= OB = OC), draw the circle. It passes through A, B and C.
O is the mid-point of AC.
Check: AC = √(4² + 6²) = √52 ≈ 7.21 cm, so the radius = 3.61 cm.
Exam Tips:
a) Draw the 90° angle at B accurately, because the circumcentre depends on it.
b) Part (ii): perpendicular bisectors of AB and BC meet at O, the mid-point of AC.
c) The radius is half the hypotenuse, ≈ 3.61 cm.
d) Keep the compass fixed at OA after fixing O, then check that the circle also passes through B and C.
Question 26: Construct a triangle ABC, given that AB = 6 cm, BC = 8 cm and median AM = 5 cm. Construct an incircle of triangle ABC and measure its radius.
Answer:
Steps of Construction:
1. Draw BC = 8 cm and find its mid-point M (BM = 4 cm).
2. With centre B and radius 6 cm and with centre M and radius 5 cm, draw arcs meeting at A. Join AB, AM and AC. Then ΔABC is the required triangle.
3. Draw the bisectors of ∠B and ∠C; they meet at I.
4. From I draw ID ⊥ BC.
5. With centre I and radius ID, draw a circle which touches the sides of ΔABC. This is the incircle.
On measuring, the radius ID ≈ 1.9 cm.
Check: AC² = 2(AM² + BM²) − AB² = 2(25 + 16) − 36 = 46, so AC ≈ 6.78 cm; area = 2 × area(ΔABM) ≈ 19.84 cm², s ≈ 10.39 cm and r ≈ 1.91 cm.
Exam Tips:
a) The median AM is given, so triangle ABM (sides 6, 4, 5 cm) is built first; the side AC comes out of the construction.
b) The incentre is the meeting point of the internal bisectors of ∠B and ∠C.
c) AC ≈ 6.78 cm, and r = area ÷ s ≈ 1.91 cm.
d) Measure the radius as the perpendicular distance from I to BC.
Question 27: Draw a circle of radius 3 cm. Draw the tangents to the circle so that the angle between them is 45°.
Answer:
Steps of Construction:
1. Draw a circle with centre O and radius 3 cm.
2. Draw two radii OS and OT such that ∠SOT = 180° − 45° = 135°.
3. At S and T draw perpendiculars to OS and OT; they meet at P.
4. Then ∠SPT = 45°, and PS and PT are the required tangents.
Check: OP = 3 ÷ cos 67.5° ≈ 7.84 cm and each tangent = 3 tan 67.5° ≈ 7.24 cm.
Exam Tips:
a) The angle between the radii at the points of contact is 180° − 45° = 135°.
b) Tangents are perpendicular to the radii at S and T; use a set square.
c) In quadrilateral OSPT: 90° + 90° + 135° + 45° = 360°.
d) The point P is about 7.84 cm from O, which you can use as a check.
Question 28: Construct a triangle ABC, given that AB = 4 cm, BC = 6 cm and median AM = 3 cm. Circumscribe a circle about the triangle.
Answer:
Steps of Construction:
1. Draw BC = 6 cm and find its mid-point M.
2. With centre B and radius 4 cm and with centre M and radius 3 cm, draw arcs meeting at A.
3. Join AB, AM and AC. Then ΔABC is the required triangle.
4. Draw the perpendicular bisectors of AB and AC; they meet at O.
5. With centre O and radius OA, draw the circle. It passes through A, B and C.
Here O coincides with M, because AM = BM = MC = 3 cm. So ∠BAC = 90° and the circle has radius 3 cm.
Check: AC = √(6² − 4²) = √20 ≈ 4.47 cm.
Exam Tips:
a) Since AM = BM = MC = 3 cm, the median is half of BC, so ∠A = 90° and M is the circumcentre.
b) Use the perpendicular bisectors of AB and AC; they must meet on BC at M, which is a good accuracy check.
c) The circumradius is 3 cm.
d) The median AM joins A to the mid-point of BC; do not confuse it with the altitude.
Question 29: Construct a triangle PQR, given PQ = 5 cm, QR = 6.5 cm and ∠PQR = 120°. Construct a circumcircle of ΔPQR.
Answer:
Steps of Construction:
1. Draw QR = 6.5 cm.
2. At Q, draw a ray QX making ∠RQX = 120°, and cut off QP = 5 cm.
3. Join PR. Then ΔPQR is the required triangle.
4. Draw the perpendicular bisectors of PQ and QR; they meet at O.
5. With centre O and radius OP (= OQ = OR), draw the circle. It passes through P, Q and R.
Check: PR² = 5² + 6.5² − 2(5)(6.5)cos 120° = 99.75, so PR ≈ 9.99 cm and R = PR ÷ (2 sin 120°) ≈ 5.77 cm.
Exam Tips:
a) The angle at Q is obtuse, so the circumcentre O lies outside ΔPQR.
b) The 120° angle is measured from QR towards QX, then QP = 5 cm is cut off along the ray.
c) The circumradius is about 5.77 cm, found with R = PR ÷ (2 sin 120°).
d) Use arcs larger than half of PQ and half of QR when drawing the perpendicular bisectors.
Question 30: Construct a ΔPMN, given that MN = 5 cm, PN = 7 cm and ∠PMN = 90°. Construct an incircle of the triangle.
Answer:
Steps of Construction:
1. Draw MN = 5 cm.
2. At M draw a ray MX making ∠NMX = 90°.
3. With centre N and radius 7 cm, draw an arc cutting MX at P. Join PN. Then ΔPMN is the required triangle.
4. Draw the bisectors of ∠M and ∠N; they meet at I.
5. From I draw ID ⊥ MN.
6. With centre I and radius ID, draw a circle. It touches the three sides.
Check: PM = √(7² − 5²) = √24 ≈ 4.9 cm, and for a right triangle r = (PM + MN − PN) ÷ 2 ≈ 1.45 cm.
Exam Tips:
a) The hypotenuse PN = 7 cm is used as the arc radius from N to locate P on the perpendicular at M.
b) The bisector of the 90° angle at M makes 45° with both MP and MN.
c) For a right triangle, r = (sum of the legs − hypotenuse) ÷ 2 ≈ 1.45 cm.
d) Draw ID ⊥ MN and use ID as the radius of the incircle.
Five Mark Questions
Question 31: Use ruler and compass only for answering this question. Draw a circle of radius 4 cm. Mark the centre as O. Mark a point P outside the circle at a distance of 7 cm from the centre. Construct two tangents to the circle from the external point P. Measure and write down the length of any one tangent.
Answer:
Steps of Construction:
1. Draw a circle with centre O and radius 4 cm.
2. Take a point P outside the circle with OP = 7 cm. Join OP.
3. Draw the perpendicular bisector of OP, meeting OP at M.
4. With centre M and radius OM, draw a circle. It cuts the given circle at Q and Q'.
5. Join PQ and PQ'. These are the required tangents.
6. On measuring, the length of a tangent PQ = PQ' ≈ 5.7 cm.
Check: PQ = √(7² − 4²) = √33 ≈ 5.74 cm, i.e. about 5.7 cm.
Exam Tips:
a) Mark O, then P exactly 7 cm away; only then bisect OP to get M.
b) Tangent length = √(OP² − r²) = √33 ≈ 5.74 cm, which agrees with your measured 5.7 cm.
c) The circle on OP as diameter makes ∠OQP = 90°.
d) Measure either tangent from P to its point of contact, not to the circle's centre.
Question 32: Using ruler and compass only, construct a ΔABC such that BC = 5 cm and AB = 6.5 cm and ∠ABC = 120°
(i) Construct a circumcircle of ΔABC.
(ii) Construct a cyclic quadrilateral ABCD, such that D is equidistant from AB and BC.
Answer:
Steps of Construction:
1. Draw BC = 5 cm.
2. At B, draw a ray BX making ∠CBX = 120°, and cut off BA = 6.5 cm along BX.
3. Join AC. Then ΔABC is the required triangle.
4. Part (i): draw the perpendicular bisectors of AB and BC; they meet at O. With centre O and radius OA (= OB = OC), draw the circumcircle.
5. Part (ii): draw the bisector of ∠ABC; it meets the circle again at D. Every point on this bisector is equidistant from AB and BC.
6. Join AD and CD. Then ABCD is the required cyclic quadrilateral.
Check: AC² = 6.5² + 5² − 2(6.5)(5)cos 120° = 99.75, so AC ≈ 9.99 cm and R = AC ÷ (2 sin 120°) ≈ 5.77 cm.
Exam Tips:
a) A point equidistant from AB and BC lies on the bisector of ∠ABC, so D is where that bisector meets the circle again.
b) In the cyclic quadrilateral ABCD, ∠B + ∠D = 180°, so ∠ADC = 60°.
c) The obtuse angle at B puts the circumcentre outside ΔABC, on the opposite side of AC from B.
d) Bisect ∠ABC into two angles of 60° with arcs of equal radius on BA and BC.
Question 33: Construct a triangle with sides 5 cm, 4 cm and 3 cm. Draw its circumcircle and measure its radius.
Answer:
Steps of Construction:
1. Draw BC = 5 cm.
2. With centre B and radius 4 cm and with centre C and radius 3 cm, draw arcs meeting at A. Join AB and AC. Then ΔABC is the required triangle.
3. Draw the perpendicular bisectors of AC and BC; they meet at O.
4. Observe that O lies on BC (it is the mid-point of BC).
5. With centre O and radius OB, draw the circle. It passes through A, B and C.
6. On measuring, the radius = 2.5 cm.
The triangle is right-angled at A (3² + 4² = 5²), so BC is a diameter and the radius is 5 ÷ 2 = 2.5 cm.
Exam Tips:
a) 3, 4, 5 is a Pythagorean triple, so the triangle is right-angled opposite the 5 cm side.
b) The circumcentre of a right triangle is the mid-point of the hypotenuse, so O lies on BC.
c) The radius is half the hypotenuse: 2.5 cm.
d) Put the 5 cm side as the base, since it is the longest; the arcs of 4 cm and 3 cm then meet above it.
Question 34: Draw a line AB = 5 cm. Mark a point C on AB such that AC = 3 cm. Using a ruler and a compass only, construct
(i) a circle of radius 2.5 cm, passing through A and C.
(ii) two tangents to the circle from the external point B. Measure and record the length of the tangents.
Answer:
Steps of Construction:
1. Draw AB = 5 cm and mark C on AB with AC = 3 cm.
2. Part (i): draw the perpendicular bisector of AC, meeting AC at D. With centre A and radius 2.5 cm, draw an arc cutting the bisector at O. With centre O and radius OA (= OC = 2.5 cm), draw the circle. It passes through A and C.
3. Part (ii): join OB. Draw the perpendicular bisector of OB, meeting OB at P.
4. With centre P and radius PO (= PB), draw a circle. It cuts the first circle at Q and Q'.
5. Join BQ and BQ'. These are the required tangents.
6. On measuring, BQ = BQ' ≈ 3.2 cm.
Check: OD = √(2.5² − 1.5²) = 2 cm, so OB² = 3.5² + 2² = 16.25 and BQ = √(16.25 − 2.5²) = √10 ≈ 3.16 cm.
Exam Tips:
a) The centre lies on the perpendicular bisector of AC at a distance of 2.5 cm from A, which is found with a single arc.
b) The circle on OB as diameter gives ∠OQB = 90°, so BQ and BQ' are tangents.
c) Tangent length = √(OB² − r²) = √10 ≈ 3.16 cm.
d) Join O to B before bisecting; the mid-point P is the centre of the second circle.
Question 35: Construct a ΔABC with BC = 6.5 cm, AB = 5.5 cm and AC = 5 cm. Construct the incircle of the triangle. Measure and record the radius of the incircle.
Answer:
Steps of Construction:
1. Draw BC = 6.5 cm.
2. With centres B and C and radii 5.5 cm and 5 cm respectively, draw two arcs intersecting at A. Join AB and AC. Then ΔABC is the required triangle.
3. Draw the internal bisectors of ∠B and ∠C meeting at I.
4. From I draw IN ⊥ BC meeting BC at N.
5. With centre I and radius IN, draw a circle. It touches all three sides, so it is the required incircle.
6. Measure IN, the radius of the incircle.
On measuring, IN ≈ 1.6 cm.
Check: s = (6.5 + 5.5 + 5) ÷ 2 = 8.5 cm, area = √(8.5 × 2 × 3 × 3.5) ≈ 13.36 cm², r = area ÷ s ≈ 1.57 cm.
Exam Tips:
a) The incircle touches all three sides, so its centre must be equidistant from them; that is why the angle bisectors are used.
b) Bisect ∠B and ∠C with arcs of equal radius on both arms.
c) Check the measured radius against r = area ÷ s ≈ 1.57 cm.
d) Record the radius with its unit, about 1.6 cm.
Question 36: Construct a ΔABC in which base BC = 6 cm, AB = 5.5 cm and ∠ABC = 120°.
(i) Construct a circle circumscribing the ΔABC.
(ii) Draw a cyclic quadrilateral ABCD so that D is equidistant from B and C.
Answer:
Steps of Construction:
1. Draw BC = 6 cm.
2. At B, draw a ray BX making ∠CBX = 120°, and cut off BA = 5.5 cm.
3. Join AC. Then ΔABC is the required triangle.
4. Part (i): draw the perpendicular bisectors of BC and AB; they meet at O. With centre O and radius OA (= OB = OC), draw the circumcircle.
5. Part (ii): extend the perpendicular bisector of BC beyond O to meet the circle at D, on the same side of BC as A. Then DB = DC.
6. Join AD and CD. Then ABCD is the required cyclic quadrilateral.
Check: AC² = 5.5² + 6² − 2(5.5)(6)cos 120° = 99.25, so AC ≈ 9.96 cm and R = AC ÷ (2 sin 120°) ≈ 5.75 cm.
Exam Tips:
a) Every point on the perpendicular bisector of BC is equidistant from B and C, so D is where that bisector meets the circle.
b) The perpendicular bisector of BC already passes through O, so it serves for both the circumcentre and the point D.
c) Choose the point D on the arc AC that does not contain B so that ABCD is a proper cyclic quadrilateral.
d) In this quadrilateral ∠B + ∠D = 180°, so ∠ADC = 60°.
Question 37: Draw a circle of radius 3.5 cm. Mark a point P outside the circle at a distance of 6 cm from the centre. Construct two tangents from P to the given circle. Measure and write down the length of one tangent.
Answer:
Steps of Construction:
1. Draw a circle with centre O and radius 3.5 cm.
2. Take a point P outside the circle with OP = 6 cm. Join OP.
3. Draw the perpendicular bisector of OP, meeting OP at M.
4. With centre M and radius OM, draw a circle. It cuts the given circle at Q and Q'.
5. Join PQ and PQ'. These are the required tangents.
6. On measuring, PQ = PQ' ≈ 4.9 cm.
Check: PQ = √(6² − 3.5²) = √23.75 ≈ 4.87 cm, i.e. about 4.9 cm.
Exam Tips:
a) Tangent length = √(OP² − r²) = √23.75 ≈ 4.87 cm.
b) The two tangents from P are equal in length, so either one may be measured.
c) Bisect OP with arcs of the same radius from O and P to get the exact mid-point M.
d) Join P to the points where the second circle cuts the first, not to O.
Question 38: Using a ruler, construct a ΔABC with BC = 6.4 cm, CA = 5.8 cm and ∠ABC = 60°. Draw its incircle. Measure and record the radius of the circle.
Answer:
Steps of Construction:
1. Draw BC = 6.4 cm.
2. At B, draw a ray BX making ∠CBX = 60°.
3. With centre C and radius 5.8 cm, draw an arc cutting BX at A. Join AC. Then ΔABC is the required triangle.
4. Draw the bisectors of ∠B and ∠C; they meet at O.
5. From O draw OE ⊥ BC.
6. With centre O and radius OE, draw a circle. It touches the three sides and is the required incircle.
7. On measuring, the radius OE ≈ 1.6 cm.
Check: AB² − 6.4·AB + 7.32 = 0 gives AB ≈ 4.91 cm. Area = ½ × 6.4 × 4.91 × sin 60° ≈ 13.6 cm², s ≈ 8.55 cm and r = area ÷ s ≈ 1.59 cm.
Exam Tips:
a) The arc from C cuts the ray BX at two points (AB ≈ 4.91 cm and AB ≈ 1.49 cm); the standard triangle uses the farther point.
b) The incentre is where the bisectors of ∠B and ∠C meet.
c) r = area ÷ s ≈ 1.59 cm, so the measured radius should be close to 1.6 cm.
d) Measure the radius along the perpendicular OE to BC.
Question 39: Using a ruler and compass only, construct a ΔABC such that AB = 5 cm, ∠ABC = 75° and the radius of the circumcircle of ΔABC is 3.5 cm. On the same diagram, construct a circle, touching AB at its middle point and also touching the side AC.
Answer:
Steps of Construction:
1. Draw AB = 5 cm.
2. At B, draw a ray BX making ∠ABX = 75°.
3. Draw the perpendicular bisector of AB, meeting AB at M. With A as centre and radius 3.5 cm, draw an arc cutting this bisector at O (on the same side as BX).
4. With centre O and radius OB (= 3.5 cm), draw the circumcircle. It cuts BX at C. Join AC. Then ΔABC is the required triangle.
5. Draw the bisector of ∠CAB, meeting the perpendicular bisector of AB at O'.
6. With centre O' and radius O'M, draw a circle. It touches AB at its mid-point M and touches AC.
Check: sin C = AB ÷ (2R) = 5 ÷ 7, so ∠C ≈ 45.6° and ∠A ≈ 59.4°. Radius of the small circle = AM tan(A ÷ 2) = 2.5 × tan 29.7° ≈ 1.43 cm. BC ≈ 6.03 cm.
Exam Tips:
a) Draw the 75° at B first; the circumcircle then cuts that ray at C, which fixes the triangle.
b) A circle touching AB at M has its centre on the perpendicular to AB at M, and a circle touching AB and AC has its centre on the bisector of ∠A.
c) The centre O' is therefore where the bisector of ∠A meets the perpendicular bisector of AB; its radius is about 1.43 cm.
d) The circumcentre O is 3.5 cm from both A and B, so use arcs of exactly 3.5 cm from A and B.
Free study material for Mathematics
Practice MCQs for Class 10 Maths Chapter 19 Constructions
About Chapter 19 Constructions MCQs for Class 10 Maths
Explore reliable practice questions for Chapter 19 Constructions tailored for Class 10 Maths learners. Use these multiple-choice formats to evaluate preparedness and strengthen problem-solving skills.
How to Verify Your MCQ Answers
Built using the official NCERT book for Class 10, these Maths objective sets provide reliable academic guidance. Pair your practice with our recommended NCERT solutions to master optimal problem-solving approaches.
Enhance Speed with Online MCQ Tests
Explore our broader library of printable assignments, chapter notes, and mock tests designed to support continuous revision and secure higher marks in ICSE Board assessments.
FAQs
You can get most exhaustive ICSE Class 10 Maths Chapter 19 Constructions MCQs with Answers for free on StudiesToday.com. These MCQs for Class 10 Maths are updated for the 2026-27 academic session as per ICSE Board examination standards.
Yes, our ICSE Class 10 Maths Chapter 19 Constructions MCQs with Answers include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the ICSE Board paper is now competency-based.
By solving our ICSE Class 10 Maths Chapter 19 Constructions MCQs with Answers, Class 10 students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Maths.
Yes, Maths MCQs for Class 10 have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused ICSE Board exams.
Yes, you can also access online interactive tests for ICSE Class 10 Maths Chapter 19 Constructions MCQs with Answers on StudiesToday.com as they provide instant answers and score to help you track your progress in Maths.