Computer Software MCQs Set 01

Practice MCQs for Computer Science Fundamentals of Computers

Explore reliable objective questions for Fundamentals of Computers tailored for learners. Utilizing these Computer Science multiple-choice formats ensures thorough preparation and strengthens problem-solving speed for upcoming school assessments.

Access Fundamentals of Computers Questions and Solutions

Access the complete set of multiple-choice questions for Fundamentals of Computers below. This focused format allows students to isolate specific topics for thorough review and uninterrupted practice alongside official NCERT textbooks.

This page has 40 multiple choice questions with answers on computer software and basics: computer generations, the first computing devices, spreadsheet, word processing and operating system basics. Each answer comes with a short explanation and a teacher's note.

Question 1: The first practical commercial typewriter was invented in 1868 in the United States by
(a) Christopher Latham Sholes
(b) Carlos Glidden
(c) Samuel Soule
(d) All of the above
Show Answer & Explanation

Answer: (d) All of the above

Explanation:
1. Sholes, Glidden and Soule worked together on the first practical typewriter, patented in 1868.
2. So all three names are correct.

Teacher's Note:
1. Typewriter inventors: Sholes, Glidden and Soule.
2. When 'All of the above' is an option, check each name.

Question 2: The transistor was used in which generation of computers?
(a) First
(b) Second
(c) Third
(d) Fourth
Show Answer & Explanation

Answer: (b) Second

Explanation:
1. Vacuum tubes belong to the first generation and transistors replaced them in the second generation.
2. Integrated circuits came in the third and microprocessors in the fourth.

Teacher's Note:
1. Generations: tubes, transistors, ICs, microprocessors, AI.
2. Second generation = transistors.

Question 3: Which is the first computing device?
(a) Abacus
(b) UNIVAC
(c) IBM-1400
(d) MARK-II
Show Answer & Explanation

Answer: (a) Abacus

Explanation:
1. The abacus, a counting frame, is the earliest known calculating device.
2. UNIVAC, IBM-1400 and Mark-II are much later electronic or electro-mechanical machines.

Teacher's Note:
1. Abacus = oldest calculating tool.
2. The others are 20th century machines.

Question 4: The third generation of computers used which technology?
(a) Vacuum tubes
(b) Transistors
(c) Silicon chips (integrated circuits)
(d) Artificial intelligence
Show Answer & Explanation

Answer: (c) Silicon chips (integrated circuits)

Explanation:
1. Third generation computers were built with integrated circuits made on silicon chips.
2. Vacuum tubes were first generation, transistors second, and artificial intelligence belongs to the fifth generation.

Teacher's Note:
1. 3rd generation = IC.
2. Do not confuse it with transistors (2nd).

Question 5: Which of the following was NOT used in first-generation computers?
(a) Vacuum tubes
(b) Punched cards
(c) Magnetic core
(d) Integrated circuits
Show Answer & Explanation

Answer: (d) Integrated circuits

Explanation:
1. First generation machines used vacuum tubes, punched cards and magnetic core or drum storage.
2. Integrated circuits appeared only in the third generation.

Teacher's Note:
1. IC = third generation.
2. Read all four options before choosing.

Question 6: First generation computers were used for
(a) Multitasking
(b) Networking
(c) Batch processing
(d) Modulation
Show Answer & Explanation

Answer: (c) Batch processing

Explanation:
1. Early machines processed jobs one after another in batches, usually fed on punched cards.
2. Multitasking and networking came much later.

Teacher's Note:
1. 1st generation = batch processing.
2. Multitasking needs an operating system.

Question 7: What was the name of the first digital computer?
(a) Unibase
(b) ENIAC
(c) Uniform
(d) Universe
Show Answer & Explanation

Answer: (b) ENIAC

Explanation:
1. ENIAC (Electronic Numerical Integrator and Computer) is regarded as the first general purpose electronic digital computer.
2. The other names are not computers.

Teacher's Note:
1. ENIAC = first electronic digital computer.
2. UNIVAC came later.

Question 8: Which generation of computers is described as still under development?
(a) Fourth Generation
(b) Fifth Generation
(c) Sixth Generation
(d) Seventh Generation
Show Answer & Explanation

Answer: (b) Fifth Generation

Explanation:
1. The fifth generation, based on artificial intelligence, is the one described as still developing.
2. The fourth generation (microprocessors) is already in use.

Teacher's Note:
1. 5th generation = AI, still developing.
2. Fourth = microprocessor.

Question 9: Artificial Intelligence is associated with which generation?
(a) First Generation
(b) Second Generation
(c) Fifth Generation
(d) Sixth Generation
Show Answer & Explanation

Answer: (c) Fifth Generation

Explanation:
1. Artificial intelligence, expert systems and natural language processing are the goals of the fifth generation.
2. Earlier generations were defined by hardware: tubes, transistors, ICs and microprocessors.

Teacher's Note:
1. AI = fifth generation.
2. Hardware changes defined generations one to four.

Question 10: The fifth generation computer is also known as
(a) Knowledge information processing system
(b) Very large scale integration (VLSI)
(c) Both of the above
(d) Process in batch mode
Show Answer & Explanation

Answer: (a) Knowledge information processing system

Explanation:
1. Fifth generation systems aim at knowledge information processing (KIPS).
2. VLSI is the technology of the fourth generation and batch mode belongs to the first.

Teacher's Note:
1. KIPS = fifth generation.
2. VLSI = fourth generation.

Question 11: Which symbol is used to enter a number as text in a spreadsheet cell?
(a) ' (apostrophe)
(b) " (double quote)
(c) = (equal sign)
(d) + (plus sign)
Show Answer & Explanation

Answer: (a) ' (apostrophe)

Explanation:
1. Typing an apostrophe before a number makes the spreadsheet treat it as text.
2. The equal sign starts a formula and the plus sign also starts a formula.

Teacher's Note:
1. Apostrophe first = text.
2. Equal sign first = formula.

Question 12: In MS Excel, data can be arranged in ascending or descending order by using
(a) Sort command from the Table menu
(b) Sort command from the Data menu
(c) Sort command from the Tools menu
(d) Sort command from the Format menu
Show Answer & Explanation

Answer: (b) Sort command from the Data menu

Explanation:
1. In Excel the Sort command is on the Data menu.
2. The remaining options describe different things and do not fit the question.

Teacher's Note:
1. Excel sorting: Data > Sort.
2. Word tables sort from the Table menu.

Question 13: Which command lets you set the vertical alignment in Word 2003?
(a) Page Setup command from the File menu
(b) Font command from the Format menu
(c) Paragraph command from the Format menu
(d) Page Setup command from the Format menu
Show Answer & Explanation

Answer: (a) Page Setup command from the File menu

Explanation:
1. Vertical alignment of text on a page is set in the Layout tab of the Page Setup dialog box, which opens from the File menu.
2. The Format menu has no Page Setup command.

Teacher's Note:
1. Vertical alignment: File > Page Setup > Layout.
2. Paragraph command sets only horizontal alignment.

Question 14: A column break in a Word document is inserted by
(a) Pressing Ctrl+Shift+Enter
(b) Pressing Ctrl+Enter
(c) Pressing Shift+Enter
(d) Pressing Alt+Enter
Show Answer & Explanation

Answer: (a) Pressing Ctrl+Shift+Enter

Explanation:
1. Ctrl+Shift+Enter breaks the column in a multi-column layout.
2. Ctrl+Enter inserts a page break and Shift+Enter a line break.

Teacher's Note:
1. Ctrl+Shift+Enter = column break.
2. Ctrl+Enter = page break.

Question 15: To set equal width for the columns of a table we select
(a) Equal column width from the Table menu
(b) Equal width from the Table menu
(c) Columns from the Format menu
(d) Distribute columns evenly
Show Answer & Explanation

Answer: (d) Distribute columns evenly

Explanation:
1. The Distribute Columns Evenly command gives the selected columns the same width.
2. The other command names do not exist in Word.

Teacher's Note:
1. Table > AutoFit > Distribute Columns Evenly.
2. Rows have a matching command.

Question 16: Which of the following is an example of a problem oriented language?
(a) BASIC
(b) PL/I
(c) Fortran
(d) All of the above
Show Answer & Explanation

Answer: (d) All of the above

Explanation:
1. Problem oriented (high level) languages are written to solve a class of problems. BASIC, PL/I and FORTRAN are all of this type.
2. So all three are correct.

Teacher's Note:
1. High level language = problem oriented.
2. Machine and assembly are machine oriented.

Question 17: A ______ contains buttons and menus that provide quick access to commonly used commands.
(a) Toolbar
(b) Menu bar
(c) Window
(d) Find
Show Answer & Explanation

Answer: (a) Toolbar

Explanation:
1. A toolbar holds buttons that run frequently used commands with one click.
2. A menu bar only lists drop-down menus.

Teacher's Note:
1. Toolbar = buttons.
2. Menu bar = menu names.

Question 18: Windows provides a direct option to uninstall software from the
(a) My Computer
(b) My Documents
(c) Control Panel
(d) Accessories
Show Answer & Explanation

Answer: (c) Control Panel

Explanation:
1. Add or Remove Programs in the Control Panel lets you uninstall installed software.
2. My Computer and My Documents only show drives and files.

Teacher's Note:
1. Uninstall: Control Panel > Add or Remove Programs.
2. Do not delete program folders by hand.

Question 19: An error in a computer program is called a
(a) Bug
(b) Crash
(c) Power failure
(d) Virus
Show Answer & Explanation

Answer: (a) Bug

Explanation:
1. A bug is a mistake in the program code. Finding and removing it is called debugging.
2. A crash is a result, a virus is malicious software.

Teacher's Note:
1. Bug = program error.
2. Debug = remove bugs.

Question 20: A group of characters that has a predefined meaning is called a
(a) File
(b) Database
(c) Field
(d) Keyboard
Show Answer & Explanation

Answer: (c) Field

Explanation:
1. A field is a group of characters such as a name or a number that stands for one item of data.
2. Fields make up records, records make up files and files make up a database.

Teacher's Note:
1. Character, field, record, file, database.
2. Field is the smallest named data item.

Question 21: 'BAS' and 'HTM' are examples of
(a) Database
(b) Domain
(c) Extension
(d) Protocol
Show Answer & Explanation

Answer: (c) Extension

Explanation:
1. BAS (BASIC program) and HTM (web page) are file name extensions that show the type of a file.
2. A domain is a web address and a protocol is a set of communication rules.

Teacher's Note:
1. Extension follows the dot in a file name.
2. .bas and .htm are extensions.

Question 22: ______ are words that a programming language has set aside for its own use.
(a) Control words
(b) Control structure
(c) Reserved words
(d) Reserved keys
Show Answer & Explanation

Answer: (c) Reserved words

Explanation:
1. Reserved words (keywords) have a fixed meaning in the language, so they cannot be used as names for variables.
2. The other terms are not standard.

Teacher's Note:
1. Keywords = reserved words.
2. Examples: if, while, print.

Question 23: 'C' is a ______ generation language.
(a) 2nd
(b) 3rd
(c) 4th
(d) 5th
Show Answer & Explanation

Answer: (b) 3rd

Explanation:
1. C is a high level language, which belongs to the third generation of languages.
2. Machine language is 1st and assembly language 2nd.

Teacher's Note:
1. 1GL machine, 2GL assembly, 3GL high level.
2. C, Pascal and COBOL are 3GL.

Question 24: Viruses cannot be spread by
(a) Networks
(b) Floppy disks
(c) CDs
(d) A modem on its own
Show Answer & Explanation

Answer: (d) A modem on its own

Explanation:
1. Infected files travel through networks, floppy disks and CDs.
2. The remaining options describe different things and do not fit the question.

Teacher's Note:
1. Viruses travel inside files.
2. Hardware alone does not hold them.

Question 25: Computer ______ data into information.
(a) Data
(b) Number
(c) Process
(d) Report
Show Answer & Explanation

Answer: (c) Process

Explanation:
1. A computer processes raw data into meaningful information.
2. Data is the input and the report is only one form of output.

Teacher's Note:
1. Data in, information out.
2. Processing is the step in between.

Question 26: When we insert a row or column, the text of the moved cells
(a) moves with the cells
(b) remains at its place but the formatting moves
(c) moves with the cells and the formatting is lost
(d) moves with the cells and some formatting is changed
Show Answer & Explanation

Answer: (a) moves with the cells

Explanation:
1. Cells shift down or right together with their contents and formats.
2. Nothing stays behind and the formatting is not lost.

Teacher's Note:
1. Insert shifts cells, not data loss.
2. Cell content and format move as one.

Question 27: Changing hardware components into a more powerful or corrected version is called
(a) Expansion
(b) Plug and Play
(c) Upgrading
(d) Upsizing
Show Answer & Explanation

Answer: (c) Upgrading

Explanation:
1. Replacing a component with a better or fixed version is upgrading.
2. Plug and Play is automatic detection of new hardware.

Teacher's Note:
1. Upgrade = better version.
2. Expansion = adding more.

Question 28: In order to move from one worksheet to another in an Excel workbook, one should click the
(a) Scroll bar
(b) Sheet tab
(c) Active cell
(d) Tab button
Show Answer & Explanation

Answer: (b) Sheet tab

Explanation:
1. Each worksheet has a sheet tab at the bottom of the workbook window; clicking it opens that sheet.
2. The scroll bar only moves the view within one sheet.

Teacher's Note:
1. Sheet tabs sit at the bottom-left.
2. Ctrl+PgUp / PgDn also switch sheets.

Question 29: Which function calculates the largest value in a set of numbers?
(a) Average
(b) Count
(c) Minimum
(d) Maximum
Show Answer & Explanation

Answer: (d) Maximum

Explanation:
1. The MAX function returns the largest value in the range.
2. Minimum gives the smallest, average the mean and count the number of entries.

Teacher's Note:
1. MAX = largest, MIN = smallest.
2. Both ignore text.

Question 30: ______ is a computer programming language.
(a) C++
(b) JAVA
(c) COBOL
(d) All of these
Show Answer & Explanation

Answer: (d) All of these

Explanation:
1. C++, Java and COBOL (and C) are all programming languages.
2. The remaining options describe different things and do not fit the question.

Teacher's Note:
1. Know the common languages: C, C++, Java, COBOL.
2. HTTP is a protocol, not a language.

Question 31: Which of the following is not a famous operating system?
(a) Windows Vista
(b) Mac OS
(c) Linux
(d) SON
Show Answer & Explanation

Answer: (d) SON

Explanation:
1. Windows Vista, Mac OS and Linux are operating systems. SON is not an operating system.
2. The remaining options describe different things and do not fit the question.

Teacher's Note:
1. Windows, Mac OS, Linux, Unix, Android are OS.
2. Unknown names are usually the odd one out.

Question 32: ______ is a unique name given to a file for identification.
(a) Device letter
(b) Folder
(c) File name
(d) File name extension
Show Answer & Explanation

Answer: (c) File name

Explanation:
1. Every file is identified by its file name. The extension only tells the file type.
2. A folder holds many files.

Teacher's Note:
1. File name = identity.
2. Extension = type.

Question 33: The primary purpose of software is to turn data into
(a) Websites
(b) Information
(c) Objects
(d) Programs
Show Answer & Explanation

Answer: (b) Information

Explanation:
1. Software instructs the computer to process data into useful information.
2. Websites, objects and programs are not the aim of software.

Teacher's Note:
1. Data becomes information after processing.
2. Software drives that processing.

Question 34: Which menu is selected for Cut, Copy and Paste?
(a) File
(b) Tools
(c) Special
(d) Edit
Show Answer & Explanation

Answer: (d) Edit

Explanation:
1. Cut, Copy and Paste are commands on the Edit menu.
2. File holds Open, Save and Print.

Teacher's Note:
1. Edit menu = cut, copy, paste, find.
2. Ctrl+X, C, V are the shortcuts.

Question 35: Text and graphics that are cut or copied are held in an area called the
(a) Paste board
(b) Copy board
(c) Clipboard
(d) Cutting
Show Answer & Explanation

Answer: (c) Clipboard

Explanation:
1. The clipboard is the temporary storage area that keeps cut or copied items until they are pasted.
2. The other names are not used in Windows.

Teacher's Note:
1. Clipboard = temporary holding area.
2. New copy replaces the old item.

Question 36: The process of finding and removing errors in software code is called
(a) Compiling
(b) Testing
(c) Running
(d) Debugging
Show Answer & Explanation

Answer: (d) Debugging

Explanation:
1. Debugging means locating the faults in a program and correcting them.
2. Compiling translates the code and running executes it.

Teacher's Note:
1. Debugging = find and fix bugs.
2. Testing only shows that errors exist.

Question 37: A ______ contains commands that can be selected.
(a) Pointer
(b) Menu
(c) Icon
(d) Button
Show Answer & Explanation

Answer: (b) Menu

Explanation:
1. A menu is a list of commands from which the user selects.
2. An icon is a small picture and a pointer shows the mouse position.

Teacher's Note:
1. Menu = list of commands.
2. Selected with a click or the keyboard.

Question 38: ______ is the process of carrying out a command.
(a) Fetching
(b) Storing
(c) Executing
(d) Decoding
Show Answer & Explanation

Answer: (c) Executing

Explanation:
1. After a command is fetched and decoded, the CPU executes it.
2. The remaining options describe different things and do not fit the question.

Teacher's Note:
1. Fetch, decode, execute.
2. Execute = carry out.

Question 39: The rectangular area of the screen that displays a program or data is a
(a) Title bar
(b) Button
(c) Dialog box
(d) Window
Show Answer & Explanation

Answer: (d) Window

Explanation:
1. A window is the rectangular area that shows a running program or a document.
2. The title bar is only the top strip of a window.

Teacher's Note:
1. Windows = rectangular work areas.
2. Each program opens in its own window.

Question 40: A wizard is an ______ program.
(a) Active
(b) Inactive
(c) Interactive
(d) Unable
Show Answer & Explanation

Answer: (c) Interactive

Explanation:
1. A wizard guides the user step by step by asking questions and acting on the answers, so it is interactive.
2. The remaining options describe different things and do not fit the question.

Teacher's Note:
1. Wizard = step-by-step helper.
2. It interacts with the user.

Fundamentals of Computers Objective Questions & Solutions for Computer Science

Computer Science Fundamentals of Computers Objective Test Questions

Test your conceptual understanding of Fundamentals of Computers with these targeted multiple-choice questions. Designed in alignment with the latest NCERT curriculum for Computer Science, these problem sets build accuracy and prepare students for objective exams.

NCERT-Aligned Objective Questions and Solutions

Each question includes structured solution keys mapped directly to standard NCERT textbooks, helping students evaluate their reasoning and correct mistakes early in their revision.

Next Steps in Your Exam Preparation

Follow up your worksheet practice by attempting the interactive online Computer Science MCQ test for this chapter to evaluate your execution speed. All platform resources are free to access.

FAQs

Where can I access latest Computer Software MCQs Set 01?

You can get most exhaustive Computer Software MCQs Set 01 for free on StudiesToday.com. These MCQs for Computer Science are updated for the 2026-27 academic session as per examination standards.

Are Assertion-Reasoning and Case-Study MCQs included in the Computer Science [current-page:node:field_class] material?

Yes, our Computer Software MCQs Set 01 include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the paper is now competency-based.

How do practicing Computer Science MCQs help in scoring full marks in [current-page:node:field_class] exams?

By solving our Computer Software MCQs Set 01, students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Computer Science.

Do you provide answers and explanations for Computer Software MCQs Set 01?

Yes, Computer Science MCQs for have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused exams.

Can I practice these Computer Science [current-page:node:field_class] MCQs online?

Yes, you can also access online interactive tests for Computer Software MCQs Set 01 on StudiesToday.com as they provide instant answers and score to help you track your progress in Computer Science.