Computer Hardware MCQs Set 02

Download NCERT MCQs for Computer Science: Fundamentals of Computers

Explore reliable objective questions for Fundamentals of Computers tailored for learners. Utilizing these Computer Science multiple-choice formats ensures thorough preparation and strengthens problem-solving speed for upcoming school assessments.

Chapter-wise Objective Questions: Fundamentals of Computers

View or download the dedicated Fundamentals of Computers MCQ resource below. Practicing these 50 objective questions regularly builds familiarity with standard exam patterns and helps secure higher marks in final Computer Science evaluations.

This page has 40 multiple choice questions with answers on storage and memory hardware: hard disk speed and access time, RAM and ROM, printers, floppy and CD capacity, and the PC and its generations. Each answer comes with an explanation and a teacher's note.

Question 1: How many bits are there in one byte?
(a) 10
(b) 21
(c) 8
(d) 5
Show Answer & Explanation

Answer: (c) 8

Explanation:
1. One byte equals 8 bits.
2. The other numbers are wrong.

Teacher's Note:
1. 1 byte = 8 bits.
2. Nibble = 4 bits.

Question 2: A pen drive is a ______ unit.
(a) Calculating
(b) Processing
(c) Programming
(d) Storage
Show Answer & Explanation

Answer: (d) Storage

Explanation:
1. A pen drive plugs into a USB port and stores data.
2. It does not calculate or process.

Teacher's Note:
1. Pen drive = portable storage.
2. Connects by USB.

Question 3: (333) in octal equals ______ in hexadecimal.
(a) 11
(b) (11)16
(c) DB
(d) (12)16
Show Answer & Explanation

Answer: (c) DB

Explanation:
1. 333 octal = 3x64 + 3x8 + 3 = 219. 219 divided by 16 gives 13 remainder 11, that is D and B.
2. So the answer is DB.

Teacher's Note:
1. Octal to decimal to hex.
2. D = 13, B = 11.

Question 4: The average access time of a hard drive is measured in
(a) Milliseconds
(b) Megahertz
(c) Gigahertz
(d) Nanoseconds
Show Answer & Explanation

Answer: (a) Milliseconds

Explanation:
1. Disk access involves moving parts and takes a few milliseconds.
2. Hertz is frequency, and nanoseconds are for RAM.

Teacher's Note:
1. Disk = ms.
2. RAM = ns.

Question 5: Which of the following is available in the form of a PC now?
(a) Mainframe
(b) Microcomputer
(c) Minicomputer
(d) 2 and 3
Show Answer & Explanation

Answer: (b) Microcomputer

Explanation:
1. A personal computer is a microcomputer.
2. Mainframes and minicomputers are larger machines.

Teacher's Note:
1. PC = microcomputer.
2. Mainframe is much larger.

Question 6: A CD-ROM drive is used for
(a) playing music
(b) playing a compact disc
(c) installing software
(d) all of the above
Show Answer & Explanation

Answer: (d) all of the above

Explanation:
1. A CD-ROM drive can play music CDs, play compact discs and install software.
2. So all are true.

Teacher's Note:
1. CD drive: music, data, software.
2. It is read-only.

Question 7: The ______ of the hard drive is the sum of seek time, latency (rotational delay) and command processing overhead.
(a) RPM
(b) Access time
(c) Spin time
(d) Read time
Show Answer & Explanation

Answer: (b) Access time

Explanation:
1. Access time adds the seek time, the rotational delay and the command overhead.
2. RPM is just the spin speed.

Teacher's Note:
1. Access = seek + latency + overhead.
2. Lower is better.

Question 8: Who is the Father of the computer?
(a) Charles Babbage
(b) Blaise Pascal
(c) Herman Hollerith
(d) All
Show Answer & Explanation

Answer: (a) Charles Babbage

Explanation:
1. Charles Babbage designed the Analytical Engine and is called the father of the computer.
2. Pascal built an early calculator and Hollerith a punched card tabulator.

Teacher's Note:
1. Babbage = father of the computer.
2. Analytical Engine.

Question 9: The binary number system has base
(a) 2
(b) 4
(c) 8
(d) 16
Show Answer & Explanation

Answer: (a) 2

Explanation:
1. Binary uses the two digits 0 and 1, so its base is 2.
2. Octal is 8 and hexadecimal 16.

Teacher's Note:
1. Binary 2, octal 8, hex 16.
2. Decimal 10.

Question 10: Character size is measured in
(a) Font
(b) Point
(c) Track
(d) Micron
Show Answer & Explanation

Answer: (b) Point

Explanation:
1. Character (font) size is given in points.
2. A font is a typeface, not a unit.

Teacher's Note:
1. Point = size.
2. 72 points = 1 inch.

Question 11: What was the name of the first digital computer?
(a) Unibax
(b) ENIAC
(c) Uniform
(d) Mark II
Show Answer & Explanation

Answer: (b) ENIAC

Explanation:
1. ENIAC was the first electronic digital computer.
2. The others are not.

Teacher's Note:
1. ENIAC = first digital.
2. UNIVAC came later.

Question 12: Circles inside a disk are known as
(a) Tracks
(b) Sectors
(c) Cylinders
(d) Clusters
Show Answer & Explanation

Answer: (a) Tracks

Explanation:
1. Tracks are concentric circles on a disk surface.
2. Sectors are parts of tracks.

Teacher's Note:
1. Track = circle.
2. Sector = part of a track.

Question 13: Bit stands for
(a) Binary number
(b) Binary digit
(c) Binary input terminal
(d) Doesn't exist
Show Answer & Explanation

Answer: (b) Binary digit

Explanation:
1. Bit is short for binary digit.
2. The others are wrong.

Teacher's Note:
1. Bit = binary digit.
2. 0 or 1.

Question 14: A CD can store about
(a) 1 GB
(b) 500 MB
(c) 700 MB
(d) 4 GB
Show Answer & Explanation

Answer: (c) 700 MB

Explanation:
1. A standard CD holds about 700 MB.
2. A DVD holds 4.7 GB.

Teacher's Note:
1. CD 700 MB.
2. DVD 4.7 GB.

Question 15: Which of the following is related to the printer?
(a) dpi
(b) cps
(c) Hertz
(d) Both dpi and cps
Show Answer & Explanation

Answer: (d) Both dpi and cps

Explanation:
1. Dots per inch and characters per second are both printer measures.
2. Hertz is frequency.

Teacher's Note:
1. dpi = print quality.
2. cps = print speed.

Question 16: Mnemonics were used in
(a) Machine language
(b) Assembly language
(c) High level language
(d) All of these
Show Answer & Explanation

Answer: (b) Assembly language

Explanation:
1. Assembly language uses mnemonics such as ADD and MOV.
2. Machine language uses binary codes.

Teacher's Note:
1. Mnemonic = short code word.
2. Assembly language.

Question 17: Which of the following is not a digital computer?
(a) Mainframe computer
(b) Mini computer
(c) Super computer
(d) Hybrid computer
Show Answer & Explanation

Answer: (d) Hybrid computer

Explanation:
1. A hybrid computer combines analog and digital features, so it is not purely digital.
2. The others are digital.

Teacher's Note:
1. Hybrid = analog + digital.
2. The rest are digital.

Question 18: Which one is an example of a pointing device?
(a) Keyboard
(b) Scanner
(c) Track ball
(d) BCR
Show Answer & Explanation

Answer: (c) Track ball

Explanation:
1. A track ball moves a pointer.
2. The keyboard types, the scanner scans and BCR reads bar codes.

Teacher's Note:
1. Pointing: mouse, trackball.
2. Others input different data.

Question 19: The device that connects the components used in a computer is the
(a) CPU
(b) Motherboard
(c) Firmware
(d) Software
Show Answer & Explanation

Answer: (b) Motherboard

Explanation:
1. The motherboard is the main circuit board that connects all the components.
2. The CPU only processes.

Teacher's Note:
1. Motherboard = main board.
2. It carries the system bus.

Question 20: Which device does not connect to the motherboard?
(a) CPU
(b) RAM
(c) SMPS
(d) UPS
Show Answer & Explanation

Answer: (d) UPS

Explanation:
1. The UPS sits outside and supplies backup power to the computer.
2. CPU and RAM plug into the board.

Teacher's Note:
1. UPS = external backup.
2. SMPS is inside the cabinet.

Question 21: BIOS is an example of
(a) Software
(b) Hardware
(c) Firmware
(d) Freeware
Show Answer & Explanation

Answer: (c) Firmware

Explanation:
1. BIOS is stored on a ROM chip, so it is firmware.
2. Freeware is free software.

Teacher's Note:
1. Firmware = software in ROM.
2. BIOS starts the boot.

Question 22: Which of the following is a character printer?
(a) Thermal printer
(b) Daisy wheel printer
(c) Laser printer
(d) Inkjet printer
Show Answer & Explanation

Answer: (b) Daisy wheel printer

Explanation:
1. The daisy wheel prints one character at a time.
2. A laser printer prints a whole page at a time.

Teacher's Note:
1. Character printer = one character at a time.
2. Dot matrix, daisy wheel.

Question 23: The operating system does all of the following EXCEPT
(a) provide a way for the user to interact with the computer
(b) manage the central processing unit
(c) manage memory and storage
(d) enable users to perform a specific task such as document editing
Show Answer & Explanation

Answer: (d) enable users to perform a specific task such as document editing

Explanation:
1. Document editing is done by application software.
2. The OS manages the hardware and resources.

Teacher's Note:
1. OS manages; applications do tasks.
2. Word is an application.

Question 24: During the boot process, the ______ looks for the system files.
(a) CD
(b) BIOS
(c) CPU
(d) DVD
Show Answer & Explanation

Answer: (b) BIOS

Explanation:
1. The BIOS starts the boot and looks for the system files.
2. The CPU only executes instructions.

Teacher's Note:
1. BIOS finds the boot files.
2. Then the OS loads.

Question 25: ______ storage refers to storage that loses its data when the power is turned off.
(a) Permanent
(b) Volatile
(c) Nonvolatile
(d) Virtual
Show Answer & Explanation

Answer: (b) Volatile

Explanation:
1. Volatile storage such as RAM loses its data on power off.
2. Nonvolatile storage keeps it.

Teacher's Note:
1. Volatile = loses data.
2. RAM is volatile.

Question 26: The time it takes a CPU to retrieve data from RAM is measured in
(a) Milliseconds
(b) Microseconds
(c) Nanoseconds
(d) Picoseconds
Show Answer & Explanation

Answer: (c) Nanoseconds

Explanation:
1. RAM access is measured in nanoseconds.
2. Disks use milliseconds.

Teacher's Note:
1. RAM = ns.
2. Disk = ms.

Question 27: The ______ of the hard drive is the sum of seek time and latency (rotational delay).
(a) RPM
(b) Access time
(c) Spin time
(d) Read time
Show Answer & Explanation

Answer: (b) Access time

Explanation:
1. Access time includes the seek time and the rotational delay.
2. RPM is the spin speed.

Teacher's Note:
1. Access = seek + latency.
2. Lower is faster.

Question 28: The speed of a hard drive is measured in
(a) KB
(b) MHz
(c) GHz
(d) RPM
Show Answer & Explanation

Answer: (d) RPM

Explanation:
1. Hard disk speed is the revolutions per minute of the platters.
2. The others measure size or frequency.

Teacher's Note:
1. RPM = disk speed.
2. Common: 5400 or 7200.

Question 29: Rotational delay on a hard disk drive is also known as
(a) Latency
(b) Seek time
(c) RPM
(d) Access time
Show Answer & Explanation

Answer: (a) Latency

Explanation:
1. Latency is the time the platter takes to rotate the desired sector under the head.
2. Seek time is the arm movement.

Teacher's Note:
1. Latency = rotation wait.
2. Seek = arm moves.

Question 30: When using virtual memory, accessing data from the hard drive is about ______ than accessing data from RAM.
(a) 100 times faster
(b) 1,000 times faster
(c) 1,000,000 times slower
(d) 10,000,000 times slower
Show Answer & Explanation

Answer: (c) 1,000,000 times slower

Explanation:
1. The disk is far slower than RAM, by about a million times in the usual textbook figure.
2. It is never faster.

Teacher's Note:
1. Disk is slower than RAM.
2. Virtual memory slows the PC.

Question 31: The Usage portion of the Task Manager's Performance tab indicates the
(a) processing frequency of the CPU
(b) size of the page file in virtual memory
(c) number of page swaps per second
(d) total RAM installed on the system
Show Answer & Explanation

Answer: (b) size of the page file in virtual memory

Explanation:
1. Page file usage shows how much of the page file (virtual memory) is in use.
2. It does not show CPU frequency or installed RAM.

Teacher's Note:
1. PF = page file.
2. Virtual memory in use.

Question 32: Low-level formatting of a hard disk will
(a) initialize the file allocation table
(b) reallocate data to make disk access more efficient
(c) defragment the disk
(d) create tracks and sectors on the magnetic surface
Show Answer & Explanation

Answer: (d) create tracks and sectors on the magnetic surface

Explanation:
1. Low-level formatting marks the tracks and sectors on the surface.
2. High-level formatting builds the file system.

Teacher's Note:
1. Low level = tracks + sectors.
2. High level = file system.

Question 33: When an input signal A = 10100 is applied to a NOT gate, its output signal is
(a) 01011
(b) 10001
(c) 10101
(d) 00101
Show Answer & Explanation

Answer: (a) 01011

Explanation:
1. A NOT gate inverts every bit: 10100 becomes 01011.
2. The other values are not the inversion.

Teacher's Note:
1. NOT = invert.
2. 1 becomes 0, 0 becomes 1.

Question 34: Which of the following is not an existing port of a computer?
(a) USB port
(b) Parallel port
(c) COM1/COM2 serial port
(d) Cache port
Show Answer & Explanation

Answer: (d) Cache port

Explanation:
1. USB, parallel and COM ports exist on computers. There is no cache port.
2. Cache is a type of memory.

Teacher's Note:
1. Ports: USB, parallel, serial, PS/2.
2. Cache is memory.

Question 35: One nibble contains ______ bits.
(a) 8
(b) 3
(c) 1
(d) 4
Show Answer & Explanation

Answer: (d) 4

Explanation:
1. A nibble is four bits, half a byte.
2. A byte has 8.

Teacher's Note:
1. Nibble = 4 bits.
2. Byte = 8 bits.

Question 36: In which of the following memories is data erased when the power supply is switched off?
(a) RAM
(b) ROM
(c) PROM
(d) EPROM
Show Answer & Explanation

Answer: (a) RAM

Explanation:
1. RAM is volatile.
2. ROM, PROM and EPROM keep their data.

Teacher's Note:
1. RAM is volatile.
2. ROM is nonvolatile.

Question 37: Which one is not an impact printer?
(a) Laser printer
(b) Dot matrix printer
(c) Daisy wheel
(d) Line printer
Show Answer & Explanation

Answer: (a) Laser printer

Explanation:
1. A laser printer works without striking the paper (non-impact).
2. The others hit the paper.

Teacher's Note:
1. Laser and inkjet = non-impact.
2. Dot matrix = impact.

Question 38: Which one is a sequential access device?
(a) Floppy disk
(b) Magnetic tape
(c) Compact disk
(d) All of these
Show Answer & Explanation

Answer: (b) Magnetic tape

Explanation:
1. Magnetic tape is read in order.
2. Disks are random access.

Teacher's Note:
1. Tape = sequential.
2. Disks = random.

Question 39: Which one is primary storage?
(a) DRAM
(b) Hard disk
(c) CPU
(d) Zip disk
Show Answer & Explanation

Answer: (a) DRAM

Explanation:
1. DRAM is the main (primary) memory.
2. The hard disk and zip disk are secondary storage.

Teacher's Note:
1. Primary = RAM, ROM.
2. Secondary = disks.

Question 40: Clock speed is measured in
(a) bits per second
(b) baud
(c) bytes
(d) Hertz
Show Answer & Explanation

Answer: (d) Hertz

Explanation:
1. Clock speed is cycles per second, in hertz (MHz or GHz).
2. Baud is signal rate.

Teacher's Note:
1. Clock = Hz.
2. GHz for CPUs.

Download Chapter MCQs: Computer Science Fundamentals of Computers

Chapter MCQs with Answers for Computer Science

Test your conceptual understanding of Fundamentals of Computers with these targeted multiple-choice questions. Designed in alignment with the latest NCERT curriculum for Computer Science, these problem sets build accuracy and prepare students for objective exams.

Expert Practice Material for Computer Science

Built using the official NCERT book for , these Computer Science objective sets provide reliable academic guidance. Pair your practice with our recommended NCERT solutions to master optimal problem-solving approaches.

Complete Your Chapter Revision

Explore our broader library of printable assignments, chapter notes, and mock tests designed to support continuous revision and secure higher marks in NCERT assessments.

FAQs

Where can I access latest Computer Hardware MCQs Set 02?

You can get most exhaustive Computer Hardware MCQs Set 02 for free on StudiesToday.com. These MCQs for Computer Science are updated for the 2026-27 academic session as per examination standards.

Are Assertion-Reasoning and Case-Study MCQs included in the Computer Science [current-page:node:field_class] material?

Yes, our Computer Hardware MCQs Set 02 include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the paper is now competency-based.

How do practicing Computer Science MCQs help in scoring full marks in [current-page:node:field_class] exams?

By solving our Computer Hardware MCQs Set 02, students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Computer Science.

Do you provide answers and explanations for Computer Hardware MCQs Set 02?

Yes, Computer Science MCQs for have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused exams.

Can I practice these Computer Science [current-page:node:field_class] MCQs online?

Yes, you can also access online interactive tests for Computer Hardware MCQs Set 02 on StudiesToday.com as they provide instant answers and score to help you track your progress in Computer Science.