Computer Capsule for Banking Exams Single Line Questions MCQs Set 01

Practice MCQs for Computer Science Fundamentals of Computers

Explore reliable objective questions for Fundamentals of Computers tailored for learners. Utilizing these Computer Science multiple-choice formats ensures thorough preparation and strengthens problem-solving speed for upcoming school assessments.

Access Fundamentals of Computers Questions and Solutions

Access the complete set of multiple-choice questions for Fundamentals of Computers below. This focused format allows students to isolate specific topics for thorough review and uninterrupted practice alongside official NCERT textbooks.

Practice 49 multiple choice questions with answers and explanations built from short fact lines on computer basics for bank exams. The questions cover keyboards, e-mail, Excel and Word basics, booting, memory, printers, networks and security terms.

Question 1: The most common method of entering text and numerical data into a computer system is through the use of a:
(a) scanner
(b) keyboard
(c) joystick
(d) monitor
Show Answer & Explanation

Answer: (b) keyboard

Explanation:
1. The keyboard is the standard input device for typing letters, digits and symbols.
2. A scanner reads images, a joystick controls games, and a monitor only displays output.

Teacher's Note:
1. Keyboard = main text and number input device.
2. Monitor is an output device.

Question 2: Unsolicited commercial e-mail is commonly known as:
(a) Phishing
(b) Spoof
(c) Cookie
(d) Spam
Show Answer & Explanation

Answer: (d) Spam

Explanation:
1. Bulk junk mail sent without the receiver's request is called spam.
2. Phishing is a fraud attempt, and a cookie is a small file stored by a browser.

Teacher's Note:
1. Spam = junk e-mail.
2. Spam over instant messaging is called spim.

Question 3: Which device is used for dividing a network into segments?
(a) Switch
(b) Monitor
(c) Scanner
(d) Plotter
Show Answer & Explanation

Answer: (a) Switch

Explanation:
1. A switch (or bridge) splits a LAN into segments so that traffic is forwarded only where needed.
2. The other devices are input or output devices, not network devices.

Teacher's Note:
1. Switch and bridge segment a network.
2. A hub just repeats signals to all ports.

Question 4: The process of carrying out commands is called:
(a) Editing
(b) Booting
(c) Executing
(d) Formatting
Show Answer & Explanation

Answer: (c) Executing

Explanation:
1. Executing means the computer carries out the instructions given to it.
2. Editing changes a document and booting starts the computer.

Teacher's Note:
1. Execute = carry out a command.
2. Remember: edit means change, execute means run.

Question 5: Editing a document consists of reading through the document you have created and then:
(a) printing it at once
(b) deleting the file
(c) correcting your errors
(d) closing the computer
Show Answer & Explanation

Answer: (c) correcting your errors

Explanation:
1. Editing is the stage in which mistakes are found and corrected.
2. Printing, deleting or shutting down does not improve the document.

Teacher's Note:
1. Edit = review and correct.
2. Format = change appearance.

Question 6: Most mail programs automatically complete which two parts of an e-mail?
(a) From and Date
(b) To and Subject
(c) Cc and Bcc
(d) Subject and Attachment
Show Answer & Explanation

Answer: (a) From and Date

Explanation:
1. The program fills in the sender (From) and the date and time on its own.
2. The recipient, subject and attachment have to be supplied by the user.

Teacher's Note:
1. From and Date are automatic.
2. To and Subject are typed by the sender.

Question 7: Different applications and documents on the Windows desktop are represented by:
(a) menus
(b) toolbars
(c) cursors
(d) icons
Show Answer & Explanation

Answer: (d) icons

Explanation:
1. Small pictures called icons stand for programs, files and folders on the desktop.
2. Menus and toolbars hold commands, and a cursor shows the typing position.

Teacher's Note:
1. Icon = small picture for a program or file.
2. Double-click an icon to open it.

Question 8: Which area in an Excel window allows entering values and formulas?
(a) Status Bar
(b) Formula Bar
(c) Title Bar
(d) Scroll Bar
Show Answer & Explanation

Answer: (b) Formula Bar

Explanation:
1. The Formula Bar shows the contents of the active cell and lets you type or edit values and formulas.
2. The status bar reports the mode, and the title bar shows the file name.

Teacher's Note:
1. Formula Bar = enter and edit cell contents.
2. Name Box shows the cell address.

Question 9: Fax machines and imaging systems are examples of:
(a) pointing devices
(b) scanning devices
(c) printing devices
(d) storage devices
Show Answer & Explanation

Answer: (b) scanning devices

Explanation:
1. Both read a printed page and convert it into electronic form, which is what scanning devices do.
2. They do not point on screen or store data permanently.

Teacher's Note:
1. Scanners, fax and imaging systems = scanning devices.
2. Scanner is an input device.

Question 10: The particular field of a record that uniquely identifies each record is called the:
(a) primary table
(b) index page
(c) data type
(d) key field
Show Answer & Explanation

Answer: (d) key field

Explanation:
1. A key field holds a value that is different for every record, such as a roll number.
2. A table stores records and a data type only fixes the kind of data.

Teacher's Note:
1. Key field = unique identifier of a record.
2. Roll number or account number are typical key fields.

Question 11: To tell Excel that a formula is being entered in a cell, the entry must begin with:
(a) the equal sign (=)
(b) the dollar sign ($)
(c) the hash sign (#)
(d) the asterisk (*)
Show Answer & Explanation

Answer: (a) the equal sign (=)

Explanation:
1. Excel treats anything starting with = as a formula to be calculated.
2. The other signs have special uses but do not start a formula.

Teacher's Note:
1. Every formula starts with =.
2. + and - also work, but = is the standard.

Question 12: The process that takes place when the computer is turned on and the operating system is loading is called:
(a) formatting
(b) scanning
(c) booting
(d) browsing
Show Answer & Explanation

Answer: (c) booting

Explanation:
1. Booting is the start-up process in which the OS is loaded into memory.
2. Formatting prepares a disk and browsing is viewing web pages.

Teacher's Note:
1. Boot = start the computer.
2. Cold boot = power on, warm boot = restart.

Question 13: Numbers in table columns are usually:
(a) left aligned
(b) centred
(c) right aligned
(d) justified
Show Answer & Explanation

Answer: (c) right aligned

Explanation:
1. Numbers are right aligned so that units, tens and hundreds line up under each other.
2. Text is the one that is normally left aligned.

Teacher's Note:
1. Numbers right, text left.
2. Right alignment helps in adding columns.

Question 14: Text in table columns is usually:
(a) left aligned
(b) right aligned
(c) vertically aligned
(d) diagonal
Show Answer & Explanation

Answer: (a) left aligned

Explanation:
1. Text entries are placed to the left edge of the cell by default.
2. Right alignment is the default only for numbers.

Teacher's Note:
1. Text left, numbers right.
2. Excel does the same by default.

Question 15: Combining two or more cells into a single cell is called:
(a) splitting
(b) sorting
(c) filtering
(d) merging
Show Answer & Explanation

Answer: (d) merging

Explanation:
1. Merging joins selected cells into one larger cell, often for a heading.
2. Splitting does the opposite, and sorting or filtering only arranges data.

Teacher's Note:
1. Merge = join cells.
2. Merge and Centre is used for titles.

Question 16: In a relational database, a data structure that organises information about a single topic into rows (tuples) and columns (attributes) is a:
(a) query
(b) table
(c) report
(d) macro
Show Answer & Explanation

Answer: (b) table

Explanation:
1. A table stores records as rows and fields as columns.
2. Queries, reports and macros work on tables but are not the storage structure.

Teacher's Note:
1. Row = tuple/record, column = attribute/field.
2. Table = relation.

Question 17: The first computers were programmed using:
(a) C language
(b) machine language
(c) Java
(d) assembly language
Show Answer & Explanation

Answer: (b) machine language

Explanation:
1. Early computers understood only binary instructions, i.e. machine language.
2. High-level languages like C and Java came much later.

Teacher's Note:
1. First generation = machine language.
2. Assembly language came next.

Question 18: A series of instructions that tells a computer what to do and how to do it is called a:
(a) file
(b) folder
(c) protocol
(d) program
Show Answer & Explanation

Answer: (d) program

Explanation:
1. A program is a set of ordered instructions executed by the computer.
2. A file stores data, a folder holds files and a protocol is a rule for communication.

Teacher's Note:
1. Program = set of instructions.
2. Software is a collection of programs.

Question 19: You can use the Address bar of a browser to:
(a) type a URL or a keyword to open a page or search results
(b) format a document
(c) send a fax
(d) copy a file to a disk
Show Answer & Explanation

Answer: (a) type a URL or a keyword to open a page or search results

Explanation:
1. Typing a URL in the Address bar opens that site, and a keyword shows related pages.
2. The other options are not functions of the Address bar.

Teacher's Note:
1. Address bar = URL box of the browser.
2. Many browsers search from it too.

Question 20: When both devices can transmit data simultaneously in both directions, the communication is known as:
(a) simplex
(b) half duplex
(c) full duplex
(d) multiplex
Show Answer & Explanation

Answer: (c) full duplex

Explanation:
1. In full duplex, data flows in both directions at the same time, as in a telephone call.
2. Simplex is one-way and half duplex is two-way but one at a time.

Teacher's Note:
1. Simplex one way, half duplex alternate, full duplex both at once.
2. Telephone = full duplex.

Question 21: Software such as Lotus Notes or Microsoft Exchange that helps people to work together is called:
(a) freeware
(b) firmware
(c) groupware
(d) shareware
Show Answer & Explanation

Answer: (c) groupware

Explanation:
1. Groupware (collaborative software) lets teams share mail, calendars and documents.
2. Freeware, shareware and firmware describe licensing or built-in programs.

Teacher's Note:
1. Groupware = collaborative software.
2. Examples: Lotus Notes, Exchange.

Question 22: The skills and knowledge assessment process that gives a person a recognised qualification in an IT area is called:
(a) certification
(b) encryption
(c) authentication
(d) formatting
Show Answer & Explanation

Answer: (a) certification

Explanation:
1. Certification is the process of assessing skills and knowledge against a standard.
2. Encryption and authentication relate to security, not skills.

Teacher's Note:
1. Certification = assessed skills.
2. Do not confuse it with digital certificates.

Question 23: The act of stealing, cheating or otherwise defrauding an organisation with the use of a computer is called:
(a) data mining
(b) cryptography
(c) batch processing
(d) computer crime
Show Answer & Explanation

Answer: (d) computer crime

Explanation:
1. Using a computer to steal or cheat is a computer (cyber) crime.
2. Data mining and batch processing are normal processing methods.

Teacher's Note:
1. Computer crime = fraud using a computer.
2. Cyber laws deal with it.

Question 24: The method used to protect privacy and security on the internet by converting data into a secret code is called:
(a) compression
(b) cryptography
(c) digitisation
(d) multiplexing
Show Answer & Explanation

Answer: (b) cryptography

Explanation:
1. Cryptography scrambles data so that only authorised people can read it.
2. Compression reduces size and multiplexing shares a line.

Teacher's Note:
1. Cryptography = secret writing.
2. Encryption turns plain text into cipher text.

Question 25: DBMS is an acronym for:
(a) Data Backup Management System
(b) Database Management System
(c) Digital Base Management Software
(d) Database Maintenance Service
Show Answer & Explanation

Answer: (b) Database Management System

Explanation:
1. A DBMS is the program that maintains and controls access to related information stored in files.
2. The other expansions are wrong.

Teacher's Note:
1. DBMS = Database Management System.
2. Examples: Oracle, MySQL, MS Access.

Question 26: Facts coded and structured for later processing, generally using a computer system, are called:
(a) information
(b) software
(c) hardware
(d) data
Show Answer & Explanation

Answer: (d) data

Explanation:
1. Data are raw facts that become information after processing.
2. Software and hardware are programs and machines, not facts.

Teacher's Note:
1. Data = raw facts.
2. Processed data = information.

Question 27: An encrypted signature used to secure messages and data sent over the internet is called a:
(a) digital signature
(b) scanned signature
(c) hand signature
(d) visiting card
Show Answer & Explanation

Answer: (a) digital signature

Explanation:
1. A digital signature proves who sent a message and that it was not altered.
2. A scanned image of a signature gives no such security.

Teacher's Note:
1. Digital signature = encrypted signature for authenticity.
2. It is created with the sender's private key.

Question 28: A device that manipulates discrete data and performs arithmetic and logic operations on it is a:
(a) analog computer
(b) hybrid computer
(c) digital computer
(d) slide rule
Show Answer & Explanation

Answer: (c) digital computer

Explanation:
1. A digital computer works on discrete (binary) values using arithmetic and logic operations.
2. Analog computers measure continuous quantities.

Teacher's Note:
1. Digital = discrete data.
2. Analog = continuous data.

Question 29: The movement of data from one storage location to another, often over long distances through satellites, is called:
(a) data mining
(b) data entry
(c) data transmission
(d) data warehousing
Show Answer & Explanation

Answer: (c) data transmission

Explanation:
1. Data transmission is sending data between places, for example via satellites.
2. Mining, entry and warehousing deal with storing and analysing data.

Teacher's Note:
1. Transmission = movement of data.
2. Satellites help with long distances.

Question 30: Writing the same data on two or more hard disks simultaneously over the same channel is called:
(a) disk mirroring
(b) disk duplexing
(c) disk partition
(d) disk caching
Show Answer & Explanation

Answer: (a) disk mirroring

Explanation:
1. In mirroring both disks share one channel (controller) and hold identical copies.
2. In duplexing a separate channel is used for each disk.

Teacher's Note:
1. Mirroring = same channel.
2. Duplexing = different channels.

Question 31: Writing the same data on two or more hard disks simultaneously over different channels is called:
(a) disk mirroring
(b) disk striping
(c) disk formatting
(d) disk duplexing
Show Answer & Explanation

Answer: (d) disk duplexing

Explanation:
1. Disk duplexing uses a separate controller or channel for each copy, so a channel failure does not stop access.
2. Mirroring uses a single channel.

Teacher's Note:
1. Duplex = different channels.
2. Both give fault tolerance.

Question 32: A hardware configuration consisting of a keyboard and monitor that can send and receive information but has no memory or processing capability is called a:
(a) workstation
(b) dumb terminal
(c) smart card
(d) laptop
Show Answer & Explanation

Answer: (b) dumb terminal

Explanation:
1. A dumb terminal depends fully on the host computer for processing and storage.
2. A workstation or laptop has its own CPU and memory.

Teacher's Note:
1. Dumb terminal = keyboard + monitor only.
2. Intelligent terminal has a processor.

Question 33: The process of transferring a file from a remote system to your own computer is called:
(a) uploading
(b) downloading
(c) formatting
(d) rebooting
Show Answer & Explanation

Answer: (b) downloading

Explanation:
1. Downloading brings a file from a server to your computer.
2. Uploading is the opposite direction.

Teacher's Note:
1. Download = server to you.
2. Upload = you to server.

Question 34: Business transactions conducted over extranets or the internet are called:
(a) e-governance
(b) telemedicine
(c) e-learning
(d) e-commerce
Show Answer & Explanation

Answer: (d) e-commerce

Explanation:
1. E-commerce means buying and selling goods or services electronically.
2. E-governance is delivery of government services.

Teacher's Note:
1. E-commerce = electronic business.
2. Examples: online shopping, net banking.

Question 35: An integrated system of operational applications combining logistics, production, contract and order management, sales forecasting and financial and HR management is called:
(a) enterprise resource planning (ERP)
(b) customer relationship management only
(c) electronic data interchange
(d) decision support system only
Show Answer & Explanation

Answer: (a) enterprise resource planning (ERP)

Explanation:
1. ERP links all the major business functions of a company in one system.
2. EDI is only the exchange of business documents.

Teacher's Note:
1. ERP = Enterprise Resource Planning.
2. One database for all departments.

Question 36: A method concerned with the systematic recording, arranging, filing, processing and dissemination of facts of business is called:
(a) data compression
(b) data hiding
(c) data processing
(d) data cleaning
Show Answer & Explanation

Answer: (c) data processing

Explanation:
1. Data processing covers recording, arranging, filing, processing and distributing business facts.
2. The other terms refer to specific techniques, not the whole cycle.

Teacher's Note:
1. Data processing = input, process, output of data.
2. Result is information.

Question 37: The Undo button on the Quick Access Toolbar allows you to:
(a) save the file
(b) print the file
(c) cancel your recent commands or actions
(d) close the program
Show Answer & Explanation

Answer: (c) cancel your recent commands or actions

Explanation:
1. Undo reverses the latest actions step by step.
2. Save, print and close are different commands.

Teacher's Note:
1. Shortcut for Undo: Ctrl+Z.
2. Redo is Ctrl+Y.

Question 38: A gigabyte represents approximately how many memory locations?
(a) one billion
(b) one million
(c) one thousand
(d) one trillion
Show Answer & Explanation

Answer: (a) one billion

Explanation:
1. 1 GB is about 1,000,000,000 bytes (exactly 1,073,741,824 in binary counting).
2. A million is a megabyte and a trillion is a terabyte.

Teacher's Note:
1. KB thousand, MB million, GB billion, TB trillion.
2. Binary count uses powers of 1024.

Question 39: Merging cells involves:
(a) dividing one cell into many cells
(b) deleting selected cells
(c) copying a cell to a new sheet
(d) creating a single cell by combining two or more selected cells
Show Answer & Explanation

Answer: (d) creating a single cell by combining two or more selected cells

Explanation:
1. Merge combines the selected cells into one cell.
2. Splitting and deleting do different jobs.

Teacher's Note:
1. Merge = many cells into one.
2. Split = one cell into many (in Word tables).

Question 40: The horizontal and vertical lines on a worksheet are called:
(a) borders
(b) gridlines
(c) headers
(d) footers
Show Answer & Explanation

Answer: (b) gridlines

Explanation:
1. Gridlines are the faint lines that separate cells on screen.
2. Borders must be applied, and headers and footers appear on printed pages.

Teacher's Note:
1. Gridlines show cell boundaries.
2. They do not print unless you choose to print them.

Question 41: To delete an incorrect character to the right of the insertion point, you press the:
(a) Backspace key
(b) Delete key
(c) Home key
(d) Tab key
Show Answer & Explanation

Answer: (b) Delete key

Explanation:
1. The Delete key erases the character to the right of the cursor.
2. Backspace removes the one on the left.

Teacher's Note:
1. Delete erases forward, Backspace backwards.
2. Home goes to the line start.

Question 42: During the boot process, the BIOS looks for the:
(a) printer drivers
(b) e-mail messages
(c) web cookies
(d) system files
Show Answer & Explanation

Answer: (d) system files

Explanation:
1. After the start-up tests the BIOS searches for the operating system files to load.
2. The other items are not needed at boot time.

Teacher's Note:
1. BIOS finds the OS during boot.
2. BIOS is stored in ROM.

Question 43: The ability of an operating system to control the activities of multiple programs at the same time is called:
(a) multitasking
(b) multiprocessing
(c) multiplexing
(d) multimedia
Show Answer & Explanation

Answer: (a) multitasking

Explanation:
1. Multitasking lets several programs run apparently together by sharing the CPU time.
2. Multiprocessing uses more than one processor.

Teacher's Note:
1. Multitasking = many programs at once.
2. Multiprocessing = many CPUs.

Question 44: The unique signal generated by a device that tells the operating system it needs immediate attention is called an:
(a) icon
(b) instruction
(c) interrupt
(d) index
Show Answer & Explanation

Answer: (c) interrupt

Explanation:
1. An interrupt signals the CPU to pause and serve the device.
2. An icon is a picture, an instruction is a command and an index is a list.

Teacher's Note:
1. Interrupt = request for immediate attention.
2. Keyboard and printer use interrupts.

Question 45: The blocks of code included in the operating system that software applications interact with are known as:
(a) application protocol identifiers
(b) automatic program installers
(c) application programming interfaces (APIs)
(d) address pointer indicators
Show Answer & Explanation

Answer: (c) application programming interfaces (APIs)

Explanation:
1. APIs are ready-made routines that programs call to use OS services.
2. The other expansions are invented.

Teacher's Note:
1. API = Application Programming Interface.
2. Apps talk to the OS through APIs.

Question 46: MS-DOS is a:
(a) command-driven operating system
(b) graphical operating system
(c) web browser
(d) database package
Show Answer & Explanation

Answer: (a) command-driven operating system

Explanation:
1. In MS-DOS the user types commands at a prompt instead of using icons.
2. Windows is the graphical successor.

Teacher's Note:
1. DOS = command driven, Windows = GUI.
2. MS-DOS is single user.

Question 47: RAM that retains data as long as power is supplied and need not be refreshed periodically is:
(a) DRAM (Dynamic Random Access Memory)
(b) EPROM
(c) PROM
(d) SRAM (Static Random Access Memory)
Show Answer & Explanation

Answer: (d) SRAM (Static Random Access Memory)

Explanation:
1. Static RAM holds data in flip-flops and needs no refresh.
2. DRAM stores charge in capacitors and must be refreshed continually.

Teacher's Note:
1. SRAM = static, fast, used in cache.
2. DRAM = dynamic, needs refresh.

Question 48: RAM whose data must be continually refreshed to maintain it is:
(a) SRAM (Static Random Access Memory)
(b) DRAM (Dynamic Random Access Memory)
(c) ROM
(d) EEPROM
Show Answer & Explanation

Answer: (b) DRAM (Dynamic Random Access Memory)

Explanation:
1. Dynamic RAM stores bits as charge in capacitors that leak, so it is refreshed again and again.
2. SRAM keeps data without refresh while powered.

Teacher's Note:
1. DRAM needs refresh, SRAM does not.
2. DRAM is used as main memory.

Question 49: Printers that create an image by physically pressing an inked ribbon against the page, such as dot matrix printers, are called:
(a) non-impact printers
(b) impact printers
(c) laser printers
(d) thermal printers
Show Answer & Explanation

Answer: (b) impact printers

Explanation:
1. Impact printers strike the paper through an inked ribbon.
2. Non-impact printers form the image without touching the paper.

Teacher's Note:
1. Impact: dot matrix, daisy wheel, line printer.
2. Non-impact: inkjet, laser, thermal.

Fundamentals of Computers Objective Questions & Solutions for Computer Science

Chapter MCQs with Answers for Computer Science

Explore reliable practice questions for Fundamentals of Computers tailored for Computer Science learners. Use these multiple-choice formats to evaluate preparedness and strengthen problem-solving skills.

Expert Practice Material for Computer Science

Each question includes structured solution keys mapped directly to standard NCERT textbooks, helping students evaluate their reasoning and correct mistakes early in their revision.

Complete Your Chapter Revision

Explore our broader library of printable assignments, chapter notes, and mock tests designed to support continuous revision and secure higher marks in NCERT assessments.

FAQs

Where can I access latest Computer Capsule for Banking Exams Single Line Questions MCQs Set 01?

You can get most exhaustive Computer Capsule for Banking Exams Single Line Questions MCQs Set 01 for free on StudiesToday.com. These MCQs for Computer Science are updated for the 2026-27 academic session as per examination standards.

Are Assertion-Reasoning and Case-Study MCQs included in the Computer Science [current-page:node:field_class] material?

Yes, our Computer Capsule for Banking Exams Single Line Questions MCQs Set 01 include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the paper is now competency-based.

How do practicing Computer Science MCQs help in scoring full marks in [current-page:node:field_class] exams?

By solving our Computer Capsule for Banking Exams Single Line Questions MCQs Set 01, students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Computer Science.

Do you provide answers and explanations for Computer Capsule for Banking Exams Single Line Questions MCQs Set 01?

Yes, Computer Science MCQs for have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused exams.

Can I practice these Computer Science [current-page:node:field_class] MCQs online?

Yes, you can also access online interactive tests for Computer Capsule for Banking Exams Single Line Questions MCQs Set 01 on StudiesToday.com as they provide instant answers and score to help you track your progress in Computer Science.