Computer Awareness Computer Fundamentals Notes Set 01

Advanced Study Material for Computer Science: Fundamentals of Computers

Access comprehensive study materials and useful resources for Fundamentals of Computers using the Computer Awareness Computer Fundamentals Notes Set 01. Designed to align with the 2026-27 academic guidelines, these advanced resources help Computer Science students reinforce core concepts beyond standard textbooks.

Practice Computer Science Resources: Fundamentals of Computers

View or download the dedicated Computer Awareness Computer Fundamentals Notes Set 01 resource below. Engaging with these advanced study guides under focused conditions ensures continuous academic progress and mastery of the 2026-27 curriculum for Fundamentals of Computers.

Computer awareness notes for competitive exams on the basics of computers: the history and generations of computers, types of computers, input and output devices, memory and its units, ports and common keyboard shortcuts. A list of important computer abbreviations and full forms is given at the end for quick revision.

Computer

1. An electronic device that consists of hardware and software.
2. Hardware components describe the physical parts of the computer.
3. Software controls hardware and runs the operating system, different programs and applications.
4. A computer system comprises a CPU, memory, input/output devices and storage devices.

History

1. It started with the birth of the abacus, a wooden rack holding two horizontal wires with beads strung on them.
2. In 1642, the first digital (mechanical) computer was developed by Blaise Pascal.
3. In 1833, Charles Babbage conceived an automatic calculator or computer, which is why he is called the Father of the Computer.
4. In 1890, punched cards (Tabulating machine) were used by Herman Hollerith and James Powers. These could read the information that had been punched into the cards automatically without human help.
5. Punch card computers were made by IBM (International Business Machines). These were electromechanical devices. These could add, multiply and sort.
6. In the 1940s (development from 1943, unveiled in 1946), ENIAC (Electronic Numerical Integrator and Computer), a high speed electronic computer, was developed by John P. Eckert, John W. Mauchly and their associates at the Moore School of Electrical Engineering of the University of Pennsylvania.
    (a) It occupied an entire 30 by 30 feet room.
    (b) It was about 1000 times faster than previous computers and used 18,000 vacuum tubes.
7. In the 1950s, magnetic core memory and transistor circuit elements were used in digital computers.
8. In the 1980s, manufacturing of semiconductor chips was done.

Facts

1. The first computer programme was developed by Lady Ada Augusta (Ada Lovelace), who worked with Babbage.
2. December 2 is observed as Computer Literacy Day.
3. The first computer made in India was Siddharth, which was manufactured by the Electronics Corporation of India.
4. The first computer in India was installed in the Main Post Office in Bengaluru.
5. The first super computer of the world is CDC 6600, released in 1964.

Generations of Computer

GenerationPeriodMain componentsExamples
I1940-56Electronic valve (vacuum tube)EDSAC, EDVAC, UNIVAC
II1956-63TransistorIBM-700, 1401, 1620, CDC-1604, 3600, ATLAS, ICL-1901
III1964-71Integrated circuitIBM-360, 370, NCR-395, CDC-1700, ICL-2903
IV1971-PresentLarge integrated circuit (microprocessor)APPLE, DCM
VPresent and beyondOptical fibre, Artificial Intelligence

Types of Computer

On the basis of data handling capabilities, there are three types of computers:

1. Analog computer
2. Digital computer
3. Hybrid computer

On the basis of computing power and speed there are the following types of computer:

1. Personal computer
2. Workstation
3. Minicomputer
4. Main frame
5. Super computer

1. Analog Computer

These involve data that continually changes and does not have discrete values. Eg: Mercury thermometer, Speedometer.

2. Digital Computer

These accept the raw data as input, done in binary numbers (0 and 1). Eg: Laptop, Desktops, Smart phones etc.

3. Hybrid Computers

These have features of both digital and analog computers. These can process both discrete and continuous data.
Eg: processors used in petrol pumps (as they calculate both quantity and price).

4. Personal Computer or Microcomputer

Based on microprocessor technology enabling manufacturers to put an entire CPU on a single chip. Eg: Laptop or notebook computer.

5. Workstation

Computer that is used explicitly for engineering applications like CAD/CAM, software development, desktop publishing.

6. Mini Computer

Comparatively larger than a micro computer.
5 to 50 times more power than a micro computer.

7. Mainframe Computer

More than 100 people can work at a time on different terminals by time sharing and multi tasking techniques.

8. Super Computer

Very powerful, most expensive, fastest computers.
Able to process most complex jobs with a very high speed.
The first supercomputer was developed in 1976 by Seymour Cray.

9. Quantum Computer

Development of this type of computer is in an advanced stage.
In quantum computers, the Q-bit (qubit) is used in place of the binary bit.

Organization of Computer

A computer is organized into three basic units:

1. The central processing unit
2. The memory unit
3. The input/output unit

Also a computer has mainly two main parts:

1. Hardware
2. Software

Central Processing Unit (CPU)

1. Referred to as the brain of the computer.
2. Given the instructions and data through programs. The CPU then fetches the program and data from the memory and performs arithmetic and logic operations as per the given instructions and stores the result back to the memory.
3. CPU stores the data as well as instructions in its local memory called registers which are limited in size and number.
4. Divided into three main components: ALU (Arithmetic and Logic Unit), Control Unit, Registers.

Arithmetic and Logic Unit

ALU performs all the arithmetic and logic operations that need to be done as per the instruction in a program.

Control Unit

CU controls sequential instruction execution, interprets instructions and guides data flow through the computer's memory, ALU and input or output devices.

Registers

Storage locations that hold instructions or data while the CPU is using them.

Glossary

ENIAC = Electronic Numerical Integrator and Computer
EDVAC = Electronic Discrete Variable Automatic Computer
EDSAC = Electronic Delay Storage Automatic Calculator
UNIVAC = Universal Automatic Computer

Input/Output

1. Input enables us to enter data into a computer. Eg: Keyboard and Mouse.
2. Output enables the computer to show the results. Eg: Printer, Monitor, Speakers etc.
3. Input-output devices are also called peripheral devices.
4. These are also called interface as they translate information for man and machine.

Input Devices

1. OMR (Optical Mark Reader) is an input device capable of reading specially prepared forms which have a provision for black marks in specific positions.
2. MICR (Magnetic Ink Character Reader) is an input device used by the banks.
3. BCR (Bar Code Reader) is able to scan and decode barcodes.
4. QR (Quick Response) code contains a matrix of code.

Keyboards

Consists of the following keys:
1. Alphabetical keys (A-Z, a-z), Number keys (0-9), Function keys (F1 to F12), modifier keys (Ctrl, Alt, Shift), Toggle keys (Caps Lock, Num Lock, Scroll Lock) etc.
2. There are 104 keys in standard keyboards, and 17 keys in the number pad.

Mouses

There are two types of mouses: Optical mouse and mechanical mouse.

Track ball

Pointing device that can be used instead of a mouse.

Light pen

Used for digital signature. It can work with any CRT based monitor.

Stylus

Pen shaped input device that is used to draw or write on the screen of a graphic tablet.

Scanner

Input device that reads an image and converts it into a digital file. There are different types of scanners:
1. Flat bed scanner (uses a flat surface to scan documents).
2. Sheet fed scanner (paper is fed into the scanner).
3. Handheld scanner (scanner is dragged over the page to be scanned).

Joystick

Input device used to control video games.

Touch Pad

It consists of a specialized surface that can translate the motion and position of a user's fingers to a relative position on the operating system.

Microphone

Converts sound waves into electric signals or inputs the audio into the computer.

Pen tab

Enables the user to hand draw images, animations and graphics with a special pen like a stylus.

Output Devices

Monitor

Known as the standard output device. It is of the following types:
1. CRT (cathode ray tube)
2. TFT (thin film transistor)
3. LCD (Liquid crystal display)
4. LED (Light emitting diode)
On the basis of colours, monitors can be divided into monochrome monitors and colour monitors.

Printers

Impact printers

1. Use hammer and ribbon on the paper directly.
2. Ex: Daisy wheel, Dot matrix, Line printers.
3. This mechanism is known as electromechanical mechanism. They are of two types:
    (a) Character printers: print only one character at a time, relatively slower speed. Eg: Dot Matrix printers.
    (b) Line printers: print one entire line of text at a time.

Non-impact printers

1. Do not use hammer and ribbon for printing.
2. Also do not strike the paper directly.
3. Eg: Inkjet, Laser, thermal printers etc.

Printers generally come in three popular versions:
1. Dot matrix printers
2. Ink-jet printers
3. Laser printers

Dot Matrix PrinterInkjet PrinterLaser Printer
PrintingPrints characters in the form of dots.Prints fully formed characters.Prints fully formed characters.
Speed200-540 characters per second.4-8 pages per minute.4-20 pages per minute.
PriceNot very expensive.Moderately priced.Expensive.

Plotters

1. Used to produce high quality, accurate and bigger drawings.
2. Used in CAD, CAM applications such as house maps, banners, hoardings, car parts etc.

Soft copy and Hard copy

Soft copy: a document or image stored on the hard disk or pen drive is referred to as a soft copy.
Hard copy: a printed document or image is referred to as a hard copy.

Computer Memory

It is used to store data and instructions. It is of three types:
1. Cache Memory
2. Primary or Main Memory
3. Secondary Memory

Cache Memory

1. Very high speed semiconductor memory.
2. Acts as a buffer between the CPU and the main memory.
3. Used to hold those parts of data and programs which are most frequently used by the CPU.
4. Much faster than main memory and consumes less access time than main memory.
5. Stores data for temporary use.
6. It is very expensive.

Primary or Main Memory

1. Holds only those data and instructions on which the computer is currently working.
2. Limited capacity; data in RAM is lost when power is switched off.
3. Volatile memory (RAM).
4. Faster than secondary memories.
5. Divided into RAM and ROM.

RAM

1. Random access memory.
2. Volatile or temporary memory.
3. Data gets erased when the power supply is switched off.
4. Faster memory.
5. CPU can change the contents of RAM at any time.
6. It is a read/write memory.
7. Two main types of RAM are: Static RAM and Dynamic RAM.

ROM

1. Read only memory.
2. Non-volatile or permanent memory.
3. ROM chip is used primarily in the start up process of a computer.
4. Types of ROM are PROM, EPROM and EEPROM:
    PROM = Programmable Read Only Memory
    EPROM = Erasable and Programmable Read Only Memory
    EEPROM = Electrically Erasable and Programmable Read Only Memory.

Secondary memory (Auxiliary memory)

1. Known as external memory or non-volatile memory.
2. These are magnetic and optical memories.

Units of memory

1. A computer system uses binary numbers to store and process data.
2. The binary digits 0 and 1 are the basic units of memory and are called bits.
3. Bits group together to form words.
4. A 4-bit word is called a nibble and an 8-bit word is called a byte.

UnitDescriptionUnitDescription
KB (Kilobyte)1 KB = 1024 BytesPB (Petabyte)1 PB = 1024 TB
MB (Megabyte)1 MB = 1024 KBEB (Exabyte)1 EB = 1024 PB
GB (Gigabyte)1 GB = 1024 MBZB (Zettabyte)1 ZB = 1024 EB
TB (Terabyte)1 TB = 1024 GBYB (Yottabyte)1 YB = 1024 ZB

Further

1. BB (Brontobyte): 1 BB = 1024 YB
2. 1 Geopbyte = 1024 Brontobytes

QuantityEquals
4 bits1 Nibble
8 bits1 Byte
1024 Bytes1 Kilobyte (KB)
1024 KB1 MB (Megabyte)
1024 MB1 GB (Gigabyte)
1024 GB1 TB (Terabyte)
1024 TB1 PB (Petabyte)
1024 PB1 EB (Exabyte)
1024 EB1 ZB (Zettabyte)
1024 ZB1 YB (Yottabyte)
1024 YB1 BB (Brontobyte)
1024 BB1 Geopbyte

Microprocessors

1. The CPU nowadays can be implemented on a single microchip which is called a microprocessor.
2. These carry out various tasks involved in data processing as well as arithmetic and logical processing.

Ports

Connection point that acts as an interface between the computer and external devices like printers, modems etc.

There are two types of ports:
1. Internal Port: It connects the system's motherboard to internal devices like hard disk, CD drive, internal Bluetooth, etc.
2. External Port: It connects the system's motherboard to external devices like a mouse, printer, USB, etc.

Some important types of ports

1. Serial Port

1. Used for external modems and older computer mouse.
2. Two versions: 9 pin, 25 pin.
3. Data travels at 115 kilobits per second.
4. Transmits a single stream of data at a time.

2. Parallel Port

1. Used for scanners and printers.
2. 25 pin model.
3. Transmits multiple data streams at a time.

3. Universal Serial Bus (USB) Port

1. It can connect all kinds of external USB devices such as external hard disks, printers, scanners, mouse, keyboards, etc.
2. Data travels at 12 megabits per second (USB 1.1).

4. Firewire Port

1. Transfers large amounts of data at a very fast speed.
2. Connects camcorders and video equipment to the computer.
3. Data travels at 400 to 800 megabits per second.

5. Ethernet Port

1. Connects to a network and high-speed Internet.
2. Data travels at 10 megabits to 1000 megabits per second depending upon the network bandwidth.

Facts

1. Hardware comprises the physical units of a computer system.
2. Software is a set of programs.
3. Data are raw facts and figures.
4. Operating system is an interface between the user and the computer hardware.
5. Some popular operating systems are DOS, UNIX, Windows, LINUX, Mac OS etc.
6. Database is a collection of interrelated data.
7. MS Access is a powerful program to create and manage databases.

Windows Explorer

1. New name = File Explorer.
2. Divided into two parts.
3. Left side displays disk drives and folders in hierarchical order.
4. Right side displays the contents of the folder.

Keyboard Shortcuts

ShortcutAction
Ctrl + ASelect all
Ctrl + BBold
Ctrl + CCopy
Ctrl + ECentre Alignment
Ctrl + IItalics
Ctrl + JJustified Alignment
Ctrl + LLeft Alignment
Ctrl + NNew blank document
Ctrl + OOpen existing document
F12Save as
Ctrl + RRight Alignment
Alt + TabSwitch to next opened program
Ctrl + YRedo
Ctrl + ZUndo
Ctrl + WClose file
Ctrl + XCut
Ctrl + VPaste
Ctrl + SSave
F7Spell Check
F2Edit/Rename
Ctrl + HomeGo to the beginning of the file
Ctrl + EndGo to the end of the file
Alt + Shift + TabSwitch to previous opened program
Alt + F4Close window / Shut down
Ctrl + UUnderline
Ctrl + PPrint
Ctrl + KHyperlink

Some Abbreviations

AbbreviationFull form
CDACCentre for Development of Advanced Computing
C-DOTCentre for Development of Telematics
HTTPHypertext Transfer Protocol
ROMRead Only Memory
RAMRandom Access Memory
BIOSBasic Input Output System
MODEMModulator-Demodulator
CADComputer Aided Design
PSTNPublic Switched Telephone Network
PSPDNPacket Switched Public Data Network
RABMNRemote Area Business Message Network
LANLocal Area Network
WANWide Area Network
MANMetropolitan Area Network
CDMACode Division Multiple Access
GAISGateway Internet Access Service
E-mailElectronic Mail
CDCompact Disc
CPUCentral Processing Unit
CAMComputer Aided Manufacturing
CAT-ScanComputerized Axial Tomography Scan
COBOLCommon Business Oriented Language
COMALCommon Algorithmic Language
DOSDisk Operating System
DTPDesktop Publishing
E-CommerceElectronic Commerce
ENIACElectronic Numerical Integrator and Computer
FAXFacsimile
FLOPSFloating Point Operations Per Second
FORTRANFormula Translation
HLLHigh Level Language
HTMLHypertext Markup Language
IBMInternational Business Machines
ICIntegrated Circuit
ISHInformation Super Highway
LISPList Processing
LLLLow Level Language
MICRMagnetic Ink Character Reader
MIPSMillion Instructions Per Second
MOPSMillion Operations Per Second
MPUMicro Processor Unit
NICNETNational Informatics Centre Network
OMROptical Mark Reader / Recognition
PC-DOSPersonal Computer Disk Operating System
PROMProgrammable Read Only Memory
SNOBOLString Oriented Symbolic Language
UPSUninterruptible Power Supply
VDUVisual Display Unit
VLSIVery Large Scale Integration
WWWWorld Wide Web
CCTVClosed Circuit Television
Wi-FiWireless Fidelity
ISPInternet Service Provider
GPSGlobal Positioning System
GPRSGeneral Packet Radio Service
CCCarbon Copy
BCCBlind Carbon Copy
CVVCard Verification Value
FAQFrequently Asked Questions
TIFFTagged Image File Format
JPEGJoint Photographic Experts Group
GIFGraphics Interchange Format
PNGPortable Network Graphics
BMPBitmap Image
PDFPortable Document Format
PANPermanent Account Number
TINTaxpayer Identification Number
ERPEnterprise Resource Planning
MISManagement Information System
CSSCascading Style Sheets
SQLStructured Query Language
USBUniversal Serial Bus
DVDDigital Versatile Disc
VGAVideo Graphics Array
LEDLight Emitting Diode
LCDLiquid Crystal Display
SMPSSwitched Mode Power Supply

CBSE Computer Science Study Material: Fundamentals of Computers

Quick Revision Material for Fundamentals of Computers

Review targeted study resources for Fundamentals of Computers tailored for learners. Utilizing these structured notes and quick-revision tools ensures complete alignment with current CBSE evaluation standards.

Expert Notes and Solved Exam Questions

Designed around the official curriculum, these study guides guarantee standard compliance. Reviewing step-by-step solutions clarifies complex sub-topics within Fundamentals of Computers and demystifies standard marking schemes for Computer Science evaluations.

Additional Study Resources for

Maximize your grade potential by utilizing Computer Science practice papers in tandem with these structured notes. All printable assignments and interactive mock tests on our platform are updated for the 2026 session and available free of charge.

FAQs

Where can I find the most advanced study material for [current-page:node:field_board] [current-page:node:field_class] Computer Science for 2026-27?

The latest 2026-27 advanced study resources for Computer Science are available for free on StudiesToday.com which includes NCERT Exemplars, high-order thinking skills (HOTS) questions, and deep-dive concept summaries.

What does the 2026-27 Computer Science study package for [current-page:node:field_class] include?

Our exhaustive Computer Science package includes chapter wise revision notes, solved practice sheets, important formulas and Concept Maps to help in better understanding of all topics.

Is this study material enough for both [current-page:node:field_board] exams and competitive tests?

Yes. For , our resources have been developed to help you get better marks in school exams and also build fundamental strength needed for entrance tests including Competency Based learning.

How should [current-page:node:field_class] students use this Computer Science material for maximum marks?

in , students should use Active Recall method, read the concept summary, then solve the Important Questions section without looking at the answers and then check your answers.

Can I download [current-page:node:field_class] Computer Science study notes in PDF for offline use?

All Computer Science study materials are provided in mobile-friendly PDF. You can download and save them on your device.

Are the [current-page:node:field_class] Computer Science resources updated for the latest NEP guidelines?

Yes, our team has ensured that all Computer Science materials for are strictly aligned with the National Education Policy (NEP) 2020 and the latest 2026-27 syllabus.