CBSE Class 12 Engineering Graphics Syllabus 2013 2014



Unit I: Isometric projection of solids 50 Pds.

(i) Construction of isometric scale showing main divisions of 10mm and smaller divisions of 1mm, also showing the leading angles. Drawing helping view/s such as triangles, pentagon, hexagon etc using isometric scale.

(ii) Isometric projections (drawn to isometric scale) of solids such as cube, regular prism and pyramids (triangular, square, pentagonal and hexagonal), cone, cylinder, sphere, hemi-sphere, frustum of right regular pyramids (triangular, square, pentagonal, hexagonal) and cone, when they are cut by a plane parallel to the base. The axis and the base side of the solid should be either perpendicular to H.P. / VP or parallel to HP and VP. (Indicate the direction of viewing)

(iii) Combination of two solids (except "frustum" of Pyramids and Cone) Keeping the base side parallel or perpendicular to H.P./V.P. and placed centrally together, axis of both the solids should not be given parallel to H.P.


(1)Question on frustum will be asked in vertical position only.

(2)Hidden lines are not required in isometric projection.

Unit II: Machine Drawing (as per SP 46 : 2003)

A. Drawing of machine parts 36 Pds.

(i) Drawing to full size scale with instruments.

(Internal choice will be given between any two of the following).

Introduction of threads: Standard profiles of screw threads square, knuckle, B.S.W., Metric (external and internal). Bolts (square, Hexagonal, Tee and Hook); Nuts: (square and hexagonal), Plain washer, combination of nut and bolt with or without washer for assembling two parts together, Single riveted lap joint with standard dimensions.

(ii) Free-hand sketches 

(Internal choice will be given between any two of the following.

Conventional representation of external and internal threads; studs (plain, square-neck and collar), screws (round-head, cheese-head, 900 flat countersunk-head, hexagonal sockethead and grub-screw). Types of rivets:- snap head, pan head-without tapered neck, flat head and 600 countersunk flat head : Types of sunk-keys (rectangular taper, woodruff and double- head feather key with gib head on both ends).

B. Assembly drawings and Dis-Assembly drawings 82 Pds.

(Internal choice will be given between an Assembly drawing and a Dis-Assembly drawing).


1. In all Assembly drawings, half sectional front view will be asked. Side/End view or Top View/Plan will be drawn without section.

2. In all the Dis-assembly drawings (asterix * marked only), only two orthographic views (one of the two views may be half in section or full in section) of any two parts.

3. (a) In all sectional views, hidden lines / edges are not to be shown.

   (b) In all full views, hidden /edges are to be shown.

1. Bearings

* (i) Open-Bearing

* (ii) Bushed-Bearing

(iii) Footstep-Bearing (only sectional front-view will be asked)

(iv) Simple Plummer-Block (only sectional front view will be asked with only round brasses).

2. Rod-Joints

* (i) Cotter-joints for circular-rods (socket and spigot joint)

* (ii) Cotter-joints for round-rods (sleeve and cotter joint)

* (iii) Cotter-joints for square rods (Gib and cotter-joint)

(iv) Knuckle-joints (only sectional front view will be asked)

3. Tie-rod and Pipe-joint

* (i) Turnbuckle

* (ii) Flange pipe joint

4. Couplings

(i) Unprotected Flange Coupling (having socket and spigot arrangement)

(ii) Protected Flange Coupling

Please refer to attached file for CBSE Class 12 Engineering Graphics Syllabus 2013-2014



Click to View or Download pdf file
Click for more Other Subjects Study Material

Latest NCERT & CBSE News

Read the latest news and announcements from NCERT and CBSE below. Important updates relating to your studies which will help you to keep yourself updated with latest happenings in school level education. Keep yourself updated with all latest news and also read articles from teachers which will help you to improve your studies, increase motivation level and promote faster learning

CBSE Board Exams in July Press Release

CBSE has released press note for the dates for the CBSE Board exams for Class 10. CBSE said “With regards to conduct of Class X examinations several queries are being received by the CBSE. In this context, it is once again reiterated that remaining examinations of...

Applied Mathematics Introduced by CBSE as Elective for Class 11 and Class 12

Mathematics Syllabus Revised by CBSE at the Senior Secondary Level! The Central Board of Secondary Education (CBSE) to offer 'Applied Mathematics' as an Elective for XI and XII standard students. The elective subject, Applied Mathematics, is focused at evolving an...

Class 10 Board Exams to be held

The CBSE board has announced that there is no change in the decision of conducting the CBSE board exams for the 29 subjects, which were canceled due to coronavirus crisis. So when the lockdown gets relaxed completely, the board will conduct the exams for the students,...

TV Channels for Students by CBSE

In enhancing the students studying part, the Government is planning to introduce one standard one channel plan. The lockdown in India has adversely collapsed all the operations including schools, colleges, and workplaces with unanticipated setbacks. On behalf of the...

CBSE advisory on student marks

CBSE has issued a public advisory for all students to be careful from unscrupulous persons impersonating themselves as officers/officials of CBSE. These people have been contacting parents and have been telling them that they have access to student marks data for Board...

Class 10 Datesheet announced

CBSE has announced the date sheet for the remaining class 10 Board Exams, see dates below

Studies Today